USB 2.0 Super Multi-Burner Drive
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
USB 2.0 Super Multi-Burner Drive
User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Before using this information and the product it supports, read Appendix B, “Service and Support,” Appendix D, “Lenovo
First Edition (March 2006)
© Copyright Lenovo 2006.
Portions © Copyright International Business Machines Corporation 2003.
All rights reserved.
U.S. GOVERNMENT USERS – RESTRICTED RIGHTS: Our products and/or services are provided with
RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to the GSA ADP Schedule
contract with Lenovo Group Limited, if any, or the standard terms of this commercial license, or if the agency is
unable to accept this Program under these terms, then we provide this Program under the provisions set forth in
Commercial Computer Software–Restricted Rights at FAR 52.227-19, when applicable, or under Rights in
Data-General, FAR 52.227.14 (Alternate III).
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
© Lenovo 2006. Portions © IBM Corp. 2003.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
Before installing this product, read the Safety Information.
Antes de instalar este produto, leia as Informações de Segurança.
Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.
Læs sikkerhedsforskrifterne, før du installerer dette produkt.
Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.
Avant d’installer ce produit, lisez les consignes de sécurité.
Vor der Installation dieses Produkts die Sicherheitshinweise lesen.
Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.
Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.
Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.
Antes de instalar este produto, leia as Informações sobre Segurança.
Antes de instalar este producto lea la información de seguridad.
© Lenovo 2006. Portions © IBM Corp. 2003.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Läs säkerhetsinformationen innan du installerar den här produkten.
vi USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
General safety guidelines
Always observe the following precautions to reduce the risk of injury and property damage.
Service
Do not attempt to service a product yourself unless instructed to do so by the Customer Support Center.
Use only a service provider who is approved to repair your particular product.
Note: Some parts can be upgraded or replaced by the customer. These parts are referred to as Customer
Replaceable Units, or CRUs. Lenovo expressly identifies CRUs as such, and provides documentation with
instructions when it is appropriate for customers to replace those parts. You must closely follow all
instructions when performing such replacements. Always make sure that the power is turned off and that
the product is unplugged from any power source before you attempt the replacement. If you have any
questions or concerns, contact the Customer Support Center.
Power cords and power adapters
Use only the power cords and power adapters supplied by the product manufacturer.
Never wrap a power cord around the power adapter or other object. Doing so can stress the cord in ways
that can cause the cord to fray, crack or crimp. This can present a safety hazard.
Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Protect the cord and power adapters from liquids. For instance, do not leave your cord or power adapter
near sinks, tubs, toilets, or on floors that are cleaned with liquid cleansers. Liquids can cause a short
circuit, particularly if the cord or power adapter has been stressed by misuse. Liquids can also cause
gradual corrosion of the power cord terminals and/or the connector terminals on the adapter which can
eventually result in overheating.
Always connect power cords and signal cables in the correct order and ensure that all power cord
connectors are securely and completely plugged into receptacles.
Do not use any power adapter that shows corrosion at the ac input pins and/or shows signs of
overheating (such as deformed plastic) at the ac input or anywhere on the power adapter.
Do not use any power cords where the electrical contacts on either end show signs of corrosion or
overheating or where the power cord appears to have been damaged in any way.
Extension cords and related devices
Ensure that extension cords, surge protectors, uninterruptible power supplies, and power strips that you
use are rated to handle the electrical requirements of the product. Never overload these devices. If power
strips are used, the load should not exceed the power strip input rating. Consult an electrician for more
information if you have questions about power loads, power requirements, and input ratings.
Plugs and outlets
If a receptacle (power outlet) that you intend to use with your computer equipment appears to be
damaged or corroded, do not use the outlet until it is replaced by a qualified electrician.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a
replacement.
Some products are equipped with a three-pronged plug. This plug fits only into a grounded electrical
outlet. This is a safety feature. Do not defeat this safety feature by trying to insert it into a non-grounded
outlet. If you cannot insert the plug into the outlet, contact an electrician for an approved outlet adapter
or to replace the outlet with one that enables this safety feature. Never overload an electrical outlet. The
overall system load should not exceed 80 percent of the branch circuit rating. Consult an electrician for
more information if you have questions about power loads and branch circuit ratings.
Be sure that the power outlet you are using is properly wired, easily accessible, and located close to the
equipment. Do not fully extend power cords in a way that will stress the cords.
Connect and disconnect the equipment from the electrical outlet carefully
Batteries
All personal computers manufactured by Lenovo contain a non-rechargeable coin cell battery to provide
power to the system clock. In addition many mobile products such as notebook PCs utilize a rechargeable
battery pack to provide system power when in portable mode. Batteries supplied by Lenovo for use with
your product have been tested for compatibility and should only be replaced with Lenovo approved
parts.
Never attempt to open or service any battery. Do not crush, puncture, or incinerate batteries or short
circuit the metal contacts. Do not expose the battery to water or other liquids. Only recharge the battery
pack strictly according to instructions included in the product documentation.
Battery abuse or mishandling can cause the battery to overheat, which can cause gasses or flame to
“vent” from the battery pack or coin cell. If your battery is damaged, or if you notice any discharge from
your battery or the buildup of foreign materials on the battery leads, stop using the battery and obtain a
replacement from the battery manufacturer.
Batteries can degrade when they are left unused for long periods of time. For some rechargeable batteries
(particularly Lithium Ion batteries), leaving a battery unused in a discharged state could increase the risk
of a battery short circuit, which could shorten the life of the battery and can also pose a safety hazard. Do
not let rechargeable Lithium-Ion batteries completely discharge or store these batteries in a discharged
state.
Heat and product ventilation
Computers generate heat when turned on and when batteries are charging. Notebook PCs can generate a
significant amount of heat due to their compact size. Always follow these basic precautions:
v Do not leave the base of your computer in contact with your lap or any part of your body for an
extended period when the computer is functioning or when the battery is charging. Your computer
produces some heat during normal operation. Extended contact with the body could cause discomfort
or, potentially, a skin burn.
v Do not operate your computer or charge the battery near flammable materials or in explosive
environments.
v Ventilation slots, fans and/or heat sinks are provided with the product for safety, comfort, and reliable
operation. These features might inadvertently become blocked by placing the product on a bed, sofa,
carpet, or other flexible surface. Never block, cover or disable these features.
viii USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CD and DVD drive safety
CD and DVD drives spin discs at a high speed. If a CD or DVD is cracked or otherwise physically
damaged, it is possible for the disc to break apart or even shatter when the CD drive is in use. To protect
against possible injury due to this situation, and to reduce the risk of damage to your machine, do the
following:
v Always store CD/DVD discs in their original packaging
v Always store CD/DVD discs out of direct sunlight and away from direct heat sources
v Remove CD/DVD discs from the computer when not in use
v Do not bend or flex CD/DVD discs, or force them into the computer or their packaging
v Check CD/DVD discs for cracks before each use. Do not use cracked or damaged discs
General safety guidelines ix
Download from Www.Somanuals.com. All Manuals Search And Download.
x
USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
About this book
This user’s manual on the CD included with this option describes how to set up the Lenovo USB 2.0
Super Multi-Burner Drive, how to connect it to a personal computer, and how to operate it. Read the
instruction manual of your computer as well. The CD also includes software applications for use with the
USB 2.0 Super Multi-Burner Drive. They will automatically install by clicking on them. Read this
instruction manual carefully before use for proper handling and operations of the USB 2.0 Super
Multi-Burner Drive.
This manual provides installation instructions in the following languages:
v Brazilian Portuguese
v Czech
v English
v French
v German
v Italian
v Japanese
v Simplified Chinese
v Slovak
v Spanish
v Traditional Chinese
v Turkish
Registering your option
Thank you for purchasing this Lenovo™ product. Please take a few moments to register your product and
provide us with information that will help Lenovo to better serve you in the future. Your feedback is
valuable to us in developing products and services that are important to you, as well as in developing
better ways to communicate with you. Register your option on the Lenovo Web site at:
www.lenovo.com/register
Lenovo will send you information and updates on your registered product unless you indicate on the
Web site questionnaire that you do not want to receive further information.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
xii USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1. USB 2.0 Super Multi-Burner Drive
This chapter contains instructions for installing the Lenovo USB 2.0 Super Multi-Burner Drive.
Product description
The USB 2.0 Super Multi-Burner Drive is a slimline DVD and CD recordable drive that attaches quickly
and conveniently to your computer through a simple connection. This drive conforms with industry
standard specifications for DVD-RAM, DVD-RW, DVD-R, DVD+RW, DVD+R, DVD-R (dual layer),
DVD+R (double layer), CD-RW, and CD-R media. The drive is a USB 2.0 device and requires connection
to two USB 2.0 ports. For more information on write and read speeds, go to Appendix A, “Product
Note: This device is intended for use only with UL Listed host computers when powered by the USB
bus.
Note: The drive is capable of writing up to 5x DVD RAM and 4x DVD+RW Media. Higher speeds are
supported in ″read-only″ mode.
The option package includes:
v USB 2.0 Super Multi-Burner Drive
v 2 Standard USB cables
v AC adapter
United States, Canada, Latin America, and Japan
All other countries
v
USB 2.0 Super Multi-Burner Drive Software and Guide Super CD
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
1-1
v USB 2.0 Super Multi-Burner Quick Installation Guide (one)
v Safety Information Manuals (two)
v Carrying case
Contact your place of purchase if an item is missing or damaged. Be sure to retain your proof of
purchase and packing material. They might be required to receive warranty service.
Application software
Your USB 2.0 Super Multi-Burner Software and User’s Guide Super CD contains the following software:
v Intervideo WinDVD Creator Plus
This software enables you to record video files to DVD-RW or DVD-R media that can be played in
most stand-alone DVD players. You can also use this software to edit and modify your own video
assets prior to recording. If you have an analog or IEEE 1394 capture device installed in your
computer, you can use this software to record video from a camera.
Computer part
Minimum
Optimal
Processor
Intel Celeron 800MHz
Intel Pentium® III 600MHz
Direct DVD support requires P4
1.6GHz or higher for real-time
requirement
RAM
64MB
128MB
Operating system
Sound
Windows 2000 or Windows XP
Windows 2000 or Windows XP
Windows-compatible sound card that Windows-compatible sound card that
supports 48KHz playback
supports 48KHz playback (PCI
recommended)
Video
Windows-compatible AGP or PCI
graphic card
Windows-compatible AGP or PCI
graphic card (overlay support
recommended)
Hard drive
v 70 MB for installation
v 70 MB for installation
v 620 MB for every hour of
v 620 MB for every hour of
VCD-quality MPEG-1 video
VCD-quality MPEG-1 video
v 2 GB for every hour of
v 2 GB for every hour of
DVD-quality MPEG-2 video
DVD-quality MPEG-2 video
1-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Computer part
Minimum
Optimal
Others
CD or DVD burner required for VCD
and DVD burning. Appropriate
hardware needed to import video
from external sources, such as DV
cameras and camcorders
Note: WinDVD Creator Plus can import and export DivX content with the DivX codec pre-installed.
DivX is a trademark of DivX Networks, Inc.
v Direct-to-Disc
This software enables you to write directly to CD-RW, CD-R, DVD-RAM, DVD-RW, and DVD-R media
using the drive letter like you would if you were writing to a diskette. All disc format types can be
formatted by Direct-to-disc. With Direct-to-disc, you can drag-and-drop files, create new directories, or
save files from any application directly to your USB 2.0 Super Multi-Burner. Direct-to-Disc is installed
automatically as part of the Multimedia Center for Think Offerings.
v UDF reader
This software enables you to use DVD-RAM, DVD-RW, and CD-RW media on computers with DVD
drives. It also allows you to read Direct-to-disc-created discs on systems without Direct-to-disc
installed.
v Multimedia Center for Think Offerings
Multimedia Center for Think Offerings is a disc mastering software that allows you to create your own
music or data discs from files on your computer, or from other disc media such as CDs or DVDs.
Music discs created with Multimedia Center for Think Offerings, will play on any CD player, whether
it’s at home, in your car, or through your computer’s CD-ROM. Multimedia Center for Think Offerings
also makes it easy to create data discs that can be read on any appropriate CD or DVD disc reader.
Note: Some DVD players cannot read CD-R media. Refer to the documentation that accompanied
your drive for information on supported media.
Multimedia Center for Think Offerings guides you, step-by-step, through the recording process with
simple Wizards and an intuitive user-interface.
Using Multimedia Center for Think Offerings you can create:
– Exact copies of existing discs - The Exact Copy feature makes a duplicate of your master disc,
transferring the disc layout of the original disc to your CD-R, CD-RW, or DVD media.
– Discs of archived data from your hard drive – The Make a Data Disc feature is used to store
electronic data, such as the files and applications that reside on your computer’s hard drive. Unlike
music discs, data discs are used to store files that are readable only by a computer, and cannot be
played on your home or car stereo—even if audio files are on the disc.
– Music compilations from WAV, MP3, or WMA files, or from existing music discs – The Make a
Music Disc feature creates custom music discs from files on your hard drive or your existing music
discs. The CD music database feature can automatically tag your files with track information to help
you sort through your collection.
Note: Please reference the Multimedia Center for Think Offerings On-line Help, for more information
on how to Make an Exact copy, Create a Data Disc, or to Create an Audio disc with Multimedia Center
for Think Offerings.
To start Multimedia Center for Think Offerings, complete the following procedure:
1. Click Start.
2. Click Programs.
3. Click Multimedia Center for Think Offerings to open the main recording software window.
v Intervideo WinDVD
Chapter 1. USB 2.0 Super Multi-Burner Drive 1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
This software enables you to play back DVD videos on your computer or to play video files from your
hard disk drive.
Note: Some graphics adapters such as the FIREGL, Intergraph, and 3dLabs, do not support DVD video
playback.
Hardware and software requirements
You must have the following hardware installed on your host computer in order to use this option:
v One or two available USB 2.0 ports
Your computer must have one of the following operating systems installed to use this option:
v Microsoft® Windows® XP
v Microsoft Windows 2000 Professional (Service Pack 4 or later)
Note: The drive will not operate correctly unless Service Pack 4 or later is installed.
Preparing to use the USB 2.0 Super Multi-Burner Drive
Before using the USB 2.0 Super Multi-Burner Drive, follow the procedure below:
1. Make sure the USB 2.0 Super Multi-Burner Drive is properly connected to your host computer.
2. Check the locations of the functions on the USB 2.0 Super Multi-Burner Drive (refer to the figures
below).
3. Insert the USB 2.0 Super Multi-Burner Drive Software and User’s Guide Super CD that was shipped with
this option to install the CD-R/CD-RW/DVD writing software.
4. Double-click on the application you want and follow the instructions on the screen.
5. Check that the drive operates normally and keep the enclosed warranty in a safe place after filling it
in.
Following are the locations of the functions on the host USB 2.0 Super Multi-Burner Drive:
ꢀ1ꢁ Disc tray
Firmly seat the media with the label face up on the disc tray.
Attention: Push the CD/DVD media down until it clicks and is secure in the
center.
ꢀ2ꢁUSB connectors
ꢀ3ꢁ DC IN connector
Insert the plug of the provided dedicated USB cable.
Connect the provided AC adapter into the DC IN connector.
1-4 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ4ꢁ Power indicator
The green LED indicates the power status and the operation states of the drive.
v LED is on: when the drive is connected in any of the supported power
configurations and the USB port of your computer.
v LED is off: when the drive is not connected to the USB port.
When ejecting the media with the power off, insert paper clip into the
ꢀ5ꢁ Emergency eject
emergency eject hole to open the disc tray.
45 mm
1.8 in
Attention: Be sure the power is off when using the emergency eject. Use the
eject button instead of the emergency eject except in an emergency.
Press this button to open the disc tray.
ꢀ6ꢁ Eject button
Attention: An electrical locking mechanism is used in this drive so that an
erroneous operation does not open the to disc tray during write. Make sure that
the power is on and the drive is not in operation before pressing the eject
button to open the disc tray.
If the disc tray cannot be opened even when the eject button is pressed or if the
disc tray needs to be opened when power is not supplied from the AC adapter,
use the emergency eject holeꢀ5ꢁ in front of the drive.
Check that nothing is placed in front of the disc tray when ejecting. When
normal ejection is impossible, an error message may appear on your computer.
When ejection is not performed normally, open the disc tray manually and close
it securely.
ꢀ7ꢁ Busy indicator
LED blinks: during data read or write.
Chapter 1. USB 2.0 Super Multi-Burner Drive 1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Power mode configurations
This section provides installation instructions for the following configurations:
v Configuration 1: Connecting the drive using self power with AC adapter (full operation)
v Configuration 2: Connecting the drive using USB standard bus power (limited speed operation)
USB PWR IN
Refer to the diagram above when configuring your drive
Configuration 1: Connecting the drive using self power with AC
adapter (full operation)
This configuration is used when connecting to AC power (use adapter shipped with the drive).
Requirements
v One standard USB cable (shipped with this option).
v AC adapter (shipped with this option).
Specifications
Read and write CD and DVD media are supported.
Read speeds for Configuration 1
Media
Max Speed w/AC Adapter
DVD-ROM (Single layer)
DVD-R (4.7 GB)
DVD+R
8x CAV
8x
8x
CD-ROM
24x
CD-R
24x
CD-RW
20x
CD-DA (DAE)
20x CAV
Write speeds for Configuration 1
Media
Write speed w/ AC Adapter
8x ZCLV
DVD-R
DVD-RW
DVD+R
DVD+RW
DVD+RW
CD-R
4x ZCLV
8x ZCLV
4x ZCLV
4x ZCLV
24x ZCLV
CD-RW
16x ZCLV
1-6 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect the USB 2.0 Super Multi-Burner Drive to your system using self power with AC adapters, do
the following:
Figure 1-1. Configuration 1: self power (AC adapter) configuration
Note: The illustration on the left applies to US/Canada/Latin America/Japan.
Note: The illustration on the right applies to all other countries.
1. Turn on your computer.
2. Using the USB cable, insert the cable plug ꢀ2ꢁ into the USB connector
of the drive. Plug the
power supplyꢀ4ꢁ into an outlet.
3. Connect the AC adapter to the DC IN connectorꢀ1ꢁ on the USB 2.0 Super Multi-Burner Drive.
4. Plug the standard USB connector ꢀ3ꢁinto the USB port of your computer.
Configuration 2: Connecting the drive using standard USB bus power
(Limited Speed Operation)
Requirements
v Two Standard USB cables (shipped with this option).
v Two free USB ports available on your system.
Specifications
Read and write of CD and DVD media are supported.
Read speeds for Configuration 2
Media
Max speed with USB Standard Bus Power
DVD-ROM (Single layer)
DVD-R (4.7 GB)
DVD+R
4x CAV
4x
4x
CD-ROM
10x
CD-R
10x
CD-RW
10x
CD-DA (DAE)
10x CAV
Chapter 1. USB 2.0 Super Multi-Burner Drive 1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Write speeds for Configuration 2
Media
USB Standard Bus Power
2x CLV
DVD-R
DVD-RW
DVD+R
DVD+RW
CD-R
2x CLV
2.4x CLV
2.4x CLV
4x CLV
CD-RW
10x CLV
This configuration is used when connecting two standard USB ports on the host to the standard USB port
and USB power
port on the drive.
Refer to the figure below during installation.
Figure 1-2. Configuration 2: USB standard bus power configuration
1. Turn on your computer.
2. Plug the standard USB connectors ꢀ3ꢁ, ꢀ4ꢁ into the USB port of your computer.
3. Using the USB cable, insert the cable plugsꢀ1ꢁ, ꢀ2ꢁ into the USB connectors of the drive.
Note: Be sure that you connect cable plug ꢀ2ꢁinto the USB connector of the drive last.
1-8 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2. Cabling the USB 2.0 Super Multi-Burner Drive to
the host computer
The following diagrams may be helpful when cabling the USB 2.0 Super Multi-Burner Drive to your host
computer. Please note that these diagrams might differ slightly from your hardware.
Cabling using the AC power adapter
5
ꢀ1ꢁ USB connector
ꢀ2ꢁ USB 2.0 Super Multi-Burner Drive
ꢀ3ꢁ AC adapter
ꢀ4ꢁ Standard USB cable assembly
ꢀ5ꢁ Typical ThinkPad computer
Figure 2-1. AC power adapter configuration
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
2-1
Cabling the USB bus power
ꢀ1ꢁ USB 2.0 Super Multi-Burner Drive
ꢀ2ꢁ USB connectors
ꢀ3ꢁ Typical ThinkPad computer
Figure 2-2. For typical cabling configuration
ꢀ1ꢁ USB 2.0 Super Multi-Burner Drive
ꢀ2ꢁ Standard USB cable assembly
ꢀ3ꢁ ThinkPad Xseries computer
Figure 2-3. For cabling to a ThinkPad Xseries notebook computer
2-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3. Features
The following list contains features of the USB 2.0 Super Multi-Burner Drive:
v Easy connection
Since this product incorporates the interface conforming to the USB 2.0 High Speed standard, it can be
connected or disconnected to or from your computer easily even when the power of the computer is
on. Docks and port replicators with AC power are supported.
v Conformance to media manufactured by major media manufacturers
This product is best tuned to almost all the CD and DVD media manufactured by major media
manufacturers and the media written by this product realizes a very high write quality. Therefore, this
drive can be used with little concern for compatibility issues.
v Incorporation of the buffer underrun prevention function
This product incorporates the buffer underrun prevention function which helps to prevent buffer
underrun errors that cause a write failure onto the CD and DVD media.
v Tray loading
This product has a tray-loading mechanism that allows easy loading and ejection of a disc. The Tray
can be opened manually or by using software that works with the computer.
v Power configurations
This drive operates with the following power configurations:
– Full Operation
When connected to AC power (use adapter shipped with the drive)
– Limited Speed Operation
When connected to two standard USB ports (use cable assembly with two standard USB connectors)
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1
3-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4. USB 2.0 Super Multi-Burner hardware installation
and removal in Windows 2000 and Windows XP
Windows 2000 and Windows XP operating systems have the native drivers for the USB 2.0 Super
Multi-Burner. Therefore, when this drive is connected, Windows will automatically install the appropriate
driver and the drive will be ready to be used. You do not have to perform any special installation or
removal procedures.
Attention:
v This drive will be recognized as ″USB 2.0 Super Multi-Burner″ by Windows Device Manager.
v In Windows 2000 operating systems, Service Pack 4 or later must be installed.
Removing the USB 2.0 Super Multi-Burner hardware
″Hot plug″ is supported for the connection between the USB cable and the computer; therefore you don’t
need to turn off the computer when you remove the USB 2.0 Super Multi-Burner. Follow the procedure
below for removing the USB 2.0 Super Multi-Burner for Windows 2000 and Windows XP.
Attention:
Do not remove and reconnect the drive from or to the computer in rapid succession. The drive may not be
recognized. Reconnect the drive approximately 20 seconds after removing.
Use the Tray icon for this procedure.
Windows 2000
1. Exit the program that uses the drive.
2. Confirm that the Write indicator of the drive is off.
3. Click the Remove icon on the tray.
4. Select removing drive. In this case, select the drive name assigned to the drive (D: in this figure).
5. The Safe to Remove Hardware confirmation window appears. Click the OK button.
6. Remove the plug of the USB cable from the USB terminal of the computer.
Note: The message indicated above may differ depending on the versions of your operating system.
Refer to the instruction manual for your computer or operating system for details.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
4-1
Windows XP
1. Exit the program that uses the drive.
2. Confirm that the Write indicator of the drive is off.
3. Click the Remove icon on the tray.
4. Select removing drive. In this case, select the drive name assigned to the drive (D: in this figure).
5. The Safe to Remove Hardware confirmation window appears. Click the OK button.
6. Remove the plug of the USB cable from the USB terminal of the computer.
Note: The message indicated above may differ depending on the versions of your operating system.
Refer to the instruction manual for your computer or operating system for details.
Setting the media
1. Press the eject button of the drive to open the disc tray.
2. Place the media on the tray with the label face upward. Align the center hole of the disc with the
clamp at the center of the tray and fit the disc in securely by pressing the outer vicinity of the center
hole.
3. Close the disc tray gently and press the tray in until it is completely locked.
4. When the disc tray is correctly closed, the media is recognized and made usable after the busy
indicator blinks for some seconds.
Ejecting the media
1. Press the eject button of the drive to automatically open the disc tray.
2. Lift the edge of the disc carefully from the tray while pressing the center section of the clamp.
3. Close the disc tray gently until the cover is completely closed. Check that the cover is securely locked.
4-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive
This section provides information on how to handle, load, and care for your media and your USB 2.0
Super Multi-Burner drive.
Before you begin
For best results, review the following guidelines before using the drive:
v Do not move your host computer or drive while formatting or writing a disc as this might cause data
errors. Also, minimize typing while formatting or writing to a disc, as this might also cause data errors.
v Keep the host computer and USB drive on a flat surface when writing to a disc.
v Turn screensavers off. Using a screensaver might interrupt the formatting and writing process.
v Do not put your Host computer into hibernation or suspend mode while writing to a disc.
Note: The read and write results of the drive depend upon the quality and characteristics of the DVD or
CD media used.
Caring for the USB 2.0 Super Multi-Burner drive
To protect your drive during operation, observe the following precautions:
v Remove the disc from the drive before moving the drive.
v Do not insert foreign objects into the drive.
v Do not stack objects on the drive.
v Do not remove the drive cover or attempt to service the drive.
v Do not push hard on the top of the drive.
v Do not operate the drive under any of the following conditions:
– High temperature, high humidity, or direct sunlight
– Excessive vibration, sudden shock, or inclined surface
– Excessive dust
Cleaning the drive
Wipe off soil on the drive using a soft cloth. If soil is persistent, use a cloth dampened with a diluted
neutral detergent after squeezing all the water out. If liquid is allowed into the drive, it may cause a
serious malfunction, an electric shock or a fire. When cleaning with liquid, be sure to remove the
provided AC adapter from the wall outlet after disconnecting the drive from your computer.
Do not apply solvents such as benzene or thinner. Chemical cleaners for home or industrial use may
damage the coating of the drive.
Using Media
This section contains information on using the USB 2.0 Super Multi-Burner.
Handling and caring for a disc
Carefully handle and clean discs, especially writable media types such as CD-R and CD-RW discs, so that
they remain readable. You can prolong the life of your discs by using the following precautions:
v Always store discs in their original packaging.
v Always store discs out of direct sunlight.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1
v Always store discs away from direct heat sources.
v Remove discs from the computer when not in use.
v Check discs for cracks BEFORE each use.
IMPORTANT: Do not use discs that are cracked.
v Do not force discs into the computer or packaging.
v Do not bend or flex discs.
v Do not use commercial cleaners to clean discs.
v Do not write on the surface of discs.
v Handle discs by the edges or the center hole.
v Do not touch the surface of discs.
v To remove dust or fingerprints, wipe discs from the center to the edge with a soft, lint-free cloth.
Attention: Wiping a disc using a circular motion can cause data loss.
Using DVD-RAM media
DVD-RAM media is available in single-sided and double-sided versions.
The 2.6 GB and 4.7 GB versions are single-sided. The 9.4 GB version is double-sided. To access the data
on both sides of the media, you must remove the media from the drive, turn it over, and re-insert it into
the drive. DVD-RAM media must be removed from the cartridge before using this drive.
Using CDs and DVDs
Complete the following procedure to read a data disc:
1. Turn on the computer.
2. Press the Eject button on the front of the drive.
3. Insert a disc in the tray with the label facing up.
4. Close the drive by gently closing the disc tray.
5. Wait for the drive busy indicator to stop blinking and is continuously on.
6. Double-click the CD-ROM or DVD-RAM/DVD-R/DVD-RW icon.
Using CD-Rs and CD-RWs
The host USB 2.0 Super Multi-Burner drive can write to both CD-R and CD-RW discs. CD-R discs cannot
be erased, but can be used with standard CD-ROM drives and CD players.
You can use CD-R discs to record audio tracks, store data, archive files, and copy files from another CD.
5-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-RW discs can be erased and rewritten, but can be used only with newer Multi-Read and
CD-RW-compatible CD-ROM and DVD-ROM drives. You can use CD-RW discs to back up, store, and
update files or to copy files from another CD.
Notes:
1. CD-R discs are playable on audio CD players. CD-RW discs are not playable on most audio CD
players.
2. The software included with this drive does not enable the drive CD-recording capabilities with DOS,
Windows 3.x, or OS/2® operating systems.
3. Ultra Speed CD-RW media writing is supported.
For more information on using the software, refer to the Multimedia Center for Think Offerings and
Direct-to-disk help information on the USB 2.0 Super Multi-Burner Software and User’s Guide Super CD.
Using DVD-Rs, DVD+Rs, DVD+RWs and DVD-RWs
The USB 2.0 Super Multi-Burner drive can write to both DVD-R and DVD-RW discs. DVD-R discs cannot
be erased, but can be used with standard DVD-ROM drives and DVD players.
You can use DVD-R discs to record audio tracks, store data, archive files, and copy files from another
DVD. Double or dual layer media allows you to store up to 8.5GB.
DVD-RW discs can be erased and rewritten, but can be used only with newer Multi-Read and
DVD-RW-compatible DVD-ROM drives. You can use DVD-RW discs to back up, store, and update files or
to copy files from another DVD.
For more information on using the software, refer to the Multimedia Center for Think Offerings and
Direct-to-disc help information on the USB 2.0 Super Multi-Burner Software and User’s Guide Super CD.
Installing Software
Once you have connected the USB 2.0 Super Multi-burner drive, you can install the application software
from the USB 2.0 Super Multi-burner Drive User’s Guide and Software CD. To do so, follow this
procedure:
1. Insert the USB 2.0 Super Multi-burner User’s Guide and Software CD into the Super Multi-burner drive.
2. The CD should automatically start. If it does, proceed to Step 5.
3. If the CD does not automatically start, click Start then Run.
4. In the Run box type e:\launch.bat where e is the drive letter of the USB 2.0 Combo drive.
5. If you get a warning from Internet Explorer about malicious scripts, right-click on the warning bar
and select Allow Blocked Content.
6. Select Software from the left-hand navigator bar.
7. Check the boxes by the software applications that you wish to install.
8. Click Go. The software you selected will install instantly.
9. Reboot after the completion message.
Note: The UDF reader software is provided to allow other computers to read Direct-to-Disc discs
made by the USB 2.0 Super Multi-burner. Do not install it into the same computer as the USB 2.0
Super Multi-burner.
Note: If the software fails to install silently, you can select interactive installs of individual packages
from the bottom line on the installer page.
Note: Direct-to-disc is installed as part of the Multimedia Center for Think Offerings. It can be
separately uninstalled if not needed.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive 5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Direct-to-disc
Direct-to-disc is provided so that you can write data to CD-R, CD-RW, DVD-RAM, DVD-RW, and DVD-R
media. DVD-RAM, DVD-RW, CD-RW, DVD-R, and CD-R media can be written to many times (data on
DVD-R and CD-R media may be appended until these discs are full).
To format and write to DVD-R, CD-R, DVD-RAM, DVD-RW, or CD-RW media:
1. Insert a disc into the drive.
2. Double-click My Computer. Right-click the Host USB 2.0 Super Multi-Burner drive letter.
3. Click Format. Formatting time will vary depending on the format process you use (Quick or Full).
4. After formatting is complete, you can drag and drop files to the Host USB 2.0 Super Multi-Burner
drive icon, or you can move files in Windows Explorer.
To make CD-R media compatible in other computers:
1. Double-click My Computer. Right-click the USB 2.0 Super Multi-Burner drive letter.
2. Click Make Compatible.
To use UDF formatted DVD-RAM, DVD-RW, or CD-RW media in other computers, a UDF reader is
included on the USB 2.0 Super Multi-Burner Software and User’s Guide Super CD. To use the UDF reader,
follow this procedure:
1. Insert the USB 2.0 Super Multi-Burner Software and User’s Guide Super CD into the CD or DVD drive of
the computer you want to use the UDF formatted discs with.
2. Click Start.
3. Click Run.
4. Type e:\UDF\language where e is the drive letter of the USB 2.0 Super Multi-Burner drive, and
language is your language.
5. Click OK.
6. Double-click SETUP.EXE and follow the on-screen instructions.
Note: The UDF reader is only needed on systems that do not have another Direct-to-disc program for
CD-RW or DVD-RW installed.
Using Intervideo WinDVD Creator Plus
With Intervideo WinDVD Creator Plus, you can capture, edit, and record video and audio files. You can
also use Intervideo WinDVD Creator Plus to create and record DVD videos using your own video and
audio files. For more detailed information on Intervideo’s WinDVD Creator Plus features, go to the
WinDVD Creator Plus User’s Guide on the USB 2.0 Super Multi-Burner Software and User’s Guide Super
CD.
The main function areas within the WinDVD Creator Plus main window are “Capture,” “Edit,” “Author,”
and “Make Movie”. From these functions, you can import and edit your own video and audio files, then
save them into any supported format. The supported formats include MPEG-1, MPEG-2, ASF, WMV, and
AVI. When you have prepared your video and audio files, by going through the “Capture” and “Edit”
steps, you can then add a customized menu from within the “Author” function. You can import your
own still images to use as menu backgrounds or select one of the sample images. When your movie is
ready, proceed to “Make Movie” where you can select the output format and video standard used in
creating your movie. Burn your movie to disc or save it to the hard disk for burning later. If you use
WinDVD Creator Plus to create a DVD image on your hard disk, you can select “Load Image to Burn”
from the Project menu.
WinDVD Creator Plus also offers the capability to record video directly to DVD recordable media using
“Disk Manager.” This is done without using any additional space on your hard disk. With Disk Manager,
5-4 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
you can capture new video or use video files you already have, and then finish your movie by creating a
customized menu. Your movie can be created in either +VR or –VR video formats. Through Disk
Manager, you can edit your movie at any time, adding or deleting video segments or changing your
customized menu.
Note: Rendering large layouts can take several hours, depending on the processor power and hard disc
speed of your host pc.
Playing audio CD’s
Use Windows Media Player or audio CD playback software such as Microsoft CD Player for playing back
the audio CD using the drive. The operation method differs depending on the software and versions.
Refer to the operation manual of your computer or software for details.
Windows 2000
In the Windows Media player, you will find Digital Playback check box when you click the CD Audio tab
in the Options window, as shown in the following figure.
In addition, you will find the Enable digital audio for this CD-ROM device with this USB 2.0 Super
Multi-Burner Drive check box, on the USB 2.0 Super Multi-Burner property on Device Manager, as shown
in the figure below. When there is no setting item for the digital playback in your player software, try the
above setting.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive 5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The windows above may differ depending on the versions of your operating system. Refer to the
instruction manual for your computer or operating system for details.
Windows XP
In Windows Media Player, you will find Digital Playback check box when you click the CD Audio tab in
the Properties window, as shown in the following figure.
5-6 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
In addition, you will find the Enable Digital Music CD with this USB 2.0 Super Multi-Burner Drive check
box on the USB 2.0 Super Multi-Burner property on Device Manager, as shown in the figure below. When
there is no setting item for the digital playback in your player software, try the above setting.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive 5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The windows above may differ depending on the versions of your operating system. Refer to the
instruction manual for your computer or operating system for details.
Using WinDVD
After you install the Super Multi-burner drive and WinDVD software, you can view a DVD movie.
Before viewing, you may need to update your operating system software and you may need to set the
DVD region code.
5-8 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating system support
The prerequisites for WinDVD to work are Internet Explorer 5 and DirectX 8.1. These components are not
present in all Microsoft Operating systems. This section list steps that are required to update the different
operating systems to allow DVD playback.
1. Windows Server 2003 and Windows Server 2000: You must install the latest service pack, Internet
Explorer 5 and DirectX.
2. Windows 98 Second Edition and Windows Me: You must install DirectX.
3. Windows 2000: You must install service pack 4 or higher, and DirectX.
DVD region codes
DVD region codes help protect the contents of a DVD. The world is divided into six regions and specific
content can be viewed only in the appropriate region. For example, content for Region 1 can be viewed
only in the U.S. and Canada. WinDVD is also region–specific.
You can verify the region code of the content by looking at the region code symbol on the back of the
content packaging.
Region code
Region
1
2
3
4
5
6
U.S., Canada
Europe, Middle East, South Africa, Japan
Southeast Asia, Taiwan, Korea
Latin America, Australia, New Zealand
Former Soviet Union, North Africa, India
People’s Republic of China
Start WinDVD by inserting the DVD into the drive. The region code is automatically set and you can
view the movie. This is the initial setting.
After the region code has been set, if you insert a DVD with a different region code, you are prompted to
change the region code. You can change the region code from your initial setting up to four times.
After the region code has been changed from its initial setting four times, it is fixed and can no longer be
changed. Thereafter, you can play DVD content only from that region.
To display the region code status, click the WinDVD Properties button on the WinDVD user interface.
The General tab contains this information.
To change the region code, do the following:
1. Turn on your computer and start your operating system.
2. Click Start.
3. Select Programs.
4. Click Intervideo WinDVD.
5. Click the Properties icon to open the Properties window.
6. Click the General Properties tab.
7. Insert a single region DVD of the new region.
8. Select the correct region code for your country.
9. Click OK.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive 5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting WinDVD
To start WinDVD, complete the following procedure:
1. Click Start.
2. Click Programs.
3. Click InterVideo WinDVD to open the DVD movie player window.
For more information on how to play the DVD movie player, refer to the WinDVD help information
on the USB 2.0 Super Multi-Burner Software and User’s Guide Super CD. If you want to watch a DVD
movie on your TV, refer to the online information provided with your computer.
Notes:
1. Your computer has been configured to provide the highest quality audio and video playback
obtainable with the available system resources. You can alter the default settings by changing the
video resolution setting within the Control Panel. Some systems do not have enough resources to
provide full-quality audio and video playback at all resolution settings. If you experience poor
playback performance, adjust the resolution to a lower setting.
2. Audio or video streams are decoded by software. The audio and video subsystems need to be fully
functional and enabled.
Copying and imaging
You can use the Multimedia Center for Think Offerings to make copies and save images of your CDs and
DVDs. You can also create CDs and DVDs from images that you have previously saved on your hard
disk. The Multimedia Center can only save images in ISO and GI formats. ISO formats can only be used
for data CDs. All other disc formats require GI images. Saved DVD images can be as large as 9GB, and
CD images as large as 730MB. Ensure that you have adequate hard disk space before proceeding.
To make a CD or DVD image:
1. To start the Multimedia Center for Think Offerings.
2. Select the Copy page.
3. Select the task Save Image to Hard Disk.
4. Give your image file a name. A random name is created for you.
5. Insert the disc which you are imaging.
6. Press the Record button.
Note: Direct-to-disc CDs cannot be saved as image files.
Note: Copy protected commercial DVDs cannot be imaged or copied.
To burn previously saved image:
1. Start the Multimedia Center for Think Offerings.
2. Select the Copy page.
3. Select the task Burn Image to CD or DVD.
4. Explore to the image which you would like to burn.
5. Insert a blank or erasable disc.
6. Press the Record button.
To copy a disc:
1. Start the Multimedia Center for Think Offerings.
2. Select the Copy page.
3. Select the task Copy a disc.
5-10 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Insert the disc which you are copying.
5. Press the Record button.
Note: Copy protected commercial DVDs cannot be copied.
Note: Copying or imaging discs without the copyright owner’s permission can result in legal
penalties. For more information on copyright law, consult your legal advisor.
Chapter 5. Using the USB 2.0 Super Multi-Burner Drive 5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
5-12 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6. Troubleshooting
Computer problems can be caused by hardware, software, or user error. The information in this section
might be useful to help you solve problems or to gather helpful information you can pass on to a service
technician. You might also need to refer to your computer, operating-system, or sound-adapter
publications.
Review the following list for any problem descriptions that might fit your situation.
USB Super Multi-burner drive is not recognized by operating system or power indicator is not lit.
1. Ensure that a USB signal cable goes from the host pc to the USB signal
. Ensure that either the
AC adapter is plugged in or a second USB cable goes to the host pc and the USB power end
connector of the drive. Power indicator on the top of the drive should light up.
2. Ensure that all of the cables are seated properly and if used, the AC adapter is plugged into a
powered outlet.
You cannot create a multi-session disc.
Be sure that there is enough space left on the disc for another session. Writing a session requires lead-in
and lead-out space (about 15 MB) in addition to the data that is recorded.
You cannot successfully write to a CD-R, CD-RW, DVD-R, DVD-RW, or DVD-RAM disc.
Take the following actions:
1. Use AC adapter mode as shown in Configuration 1.
2. Verify that the process is not being interrupted by a screen saver, an antivirus program, an Internet or
e-mail program, or other software. Disable the functions that might interrupt the write operation.
Note: Replace the disc if it is bad or scratched.
3. Verify that the hard disk has been defragmented.
4. Consult the hard disk drive manufacturer or vendor if an older hard disk drive is conducting a
thermal recalibration during a write operation.
5. Disable the Windows Auto Insert Notify function on your CD-ROM and CD-RW drives
6. Remove the UDF Reader if installed by mistake on your computer, with the USB 2.0 Multi-burner
drive.
You cannot eject a CD or DVD disc. (See Emergency eject procedure on page 1-5).
Take the following actions after ensuring that the drive is not in the process of writing to a disc:
1. Eject the disc through software.
2. Use the Eject button.
3. Turn off the computer. Wait 45 seconds; then turn on the computer and try using the Eject button
again.
4. If other methods do not work, use the emergency eject.
You cannot read from the CD or DVD disc after successfully writing to it.
Take the following actions:
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
6-1
1. If you can read the CD or DVD disc in another CD or DVD player or you can see previous sessions,
the directory information might be damaged on the volume, making it unreadable. To get ideas for
troubleshooting, check the documentation that comes with the software.
2. You might have a damaged CD-R, CD-RW, DVD-R, DVD-RW, or DVD-RAM disc. Try a new disc or
another brand of CD or DVD disc.
3. If you can read from a CD-RW, DVD-RW, or DVD-RAM disc in the writing drive, but not in another
Multi-Read drive, be sure that a UDF Reader program is installed in the computer.
4. Avoid writing at the slower 1X speed unless required by your computer.
5. Use the AC adapter mode as shown in Configuration 1.
6-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A. Product specifications
This appendix includes the following information:
v Physical specifications
v Power requirements
v Environmental requirements
v Read speeds
v Write speeds
Physical specifications
The physical specifications1 of the drive are listed in the following table.
Physical specification
Height
Width
Length
Weight
24 mm (0.9 in.)
142 mm (5.6 in.)
160 mm (6.3 in.)
Approx. 430 g (0.95 lb)
Power requirements
The following table lists the power specifications by voltage level for the drive. The power specifications
are measured at the drive power connector and are nominal values.
Power specifications
AC/Aux Power
Voltage
16Vdc
5Vdc
Average
1000 mA
850mA
Maximum
1200mA
1300mA
USB Standard Bus Power
Environmental requirements
Specification
Operational
Nonoperational (storage
by)
Nonoperational
(Shipping)
Temperature
+5C to +35° C
8% to 80%
-10C to +60C
5% to 95%
-40C to +60C
5% to 95%
Relative humidity
Read Speed
Media
Max Speed w/AC Adapter
(Configuration 1)
Max speed with USB Standard Bus
Power (Configuration 2)
DVD-ROM (Single layer)
DVD-ROM (Dual layer)
DVD-R (4.7 GB)
8x CAV
4x CAV
8x
4x CAV
4x CAV
4x
DVD-RW (4.7 GB)
4x
4x
1. Product-description data represents Lenovo’s design objectives and is provided for comparative purposes; actual results might
vary based on a variety of factors. This product data does not constitute a warranty. Data is subject to change without notice.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
A-1
DVD-video
DVD-RAM (4.7/9.4 GB)
DVD-RAM (2.6 GB)
DVD+R
4x
4x
5x/3x ZCLV
1x ZCLV
8x
5x/3x ZCLV
1x ZCLV
4x
DVD+RW
4x
4x
CD-ROM
24x
10x
CD-R
24x
10x
CD-RW
20x
10x
CD-DA (DAE)
DVD-R DL
DVD+R DL
20x CAV
4X CAV
4X CAV
10x CAV
4X CAV
4X CAV
Write Speed
Write speed w/ AC Adapter
(Configuration 1)
USB Standard Bus Power
(Configuration 2)
Media
DVD-R
8x ZCLV
2x CLV
DVD-R DL
DVD-RW
DVD-RAM (4.7/9.4G)
DVD+R
2x CLV
2x CLV
4x ZCLV
2x CLV
5x/3x/1x ZCLV
8x ZCLV
5x/3x/1x ZCLV
2.4x CLV
2.4x CLV
2.4x CLV
4x CLV
DVD+R DL
DVD+RW
CD-R
2.4x CLV
4x ZCLV
24x ZCLV
16x ZCLV
CD-RW
10x CLV
Note: Up to 5x DVD-RAM media. 12x RAM media is Read Only.
Note: Up to 4x DVD+RW media. 8x +RW media is Read Only.
A-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B. Service and Support
The following information describes the technical support that is available for your product, during the
warranty period or throughout the life of the product. Refer to your Lenovo Statement of Limited
Warranty for a full explanation of Lenovo warranty terms.
Online technical support
Online technical support is available during the life of your product through the Lenovo Support Web
During the warranty period, assistance for replacement or exchange of defective components is available.
In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your
location. Your technical support representative can help you determine the best alternative.
Telephone technical support
Installation and configuration support through the Customer Support Center will be withdrawn or made
available for a fee, at Lenovo’s discretion, 90 days after the option has been withdrawn from marketing.
Additional support offerings, including step-by-step installation assistance, are available for a nominal
fee.
To assist the technical support representative, have available as much of the following information as
possible:
v Option name
v Option number
v Proof of purchase
v Computer manufacturer, model, serial number, and manual
v Exact wording of the error message (if any)
v Description of the problem
v Hardware and software configuration information for your system
If possible, be at your computer. Your technical support representative might want to walk you through
the problem during the call.
numbers are subject to change without notice. For the most current phone numbers, go to
region is not listed, contact your reseller or Lenovo marketing representative.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
B-1
B-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C. Notices
Lenovo may not offer the products, services, or features discussed in this document in all countries.
Consult your local Lenovo representative for information on the products and services currently available
in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply
that only that Lenovo product, program, or service may be used. Any functionally equivalent product,
program, or service that does not infringe any Lenovo intellectual property right may be used instead.
However, it is the user’s responsibility to evaluate and verify the operation of any other product,
program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in this
document. The furnishing of this document does not give you any license to these patents. You can send
license inquiries, in writing, to:
Lenovo (United States), Inc.
500 Park Offices Drive, Hwy. 54
Research Triangle Park, NC 27709
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically
made to the information herein; these changes will be incorporated in new editions of the publication.
Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in
this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life support
applications where malfunction may result in injury or death to persons. The information contained in
this document does not affect or change Lenovo product specifications or warranties. Nothing in this
document shall operate as an express or implied license or indemnity under the intellectual property
rights of Lenovo or third parties. All information contained in this document was obtained in specific
environments and is presented as an illustration. The result obtained in other operating environments
may vary.
Lenovo may use or distribute any of the information you supply in any way it believes appropriate
without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not
in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part
of the materials for this Lenovo product, and use of those Web sites is at your own risk.
Any performance data contained herein was determined in a controlled environment. Therefore, the
result obtained in other operating environments may vary significantly. Some measurements may have
been made on development-level systems and there is no guarantee that these measurements will be the
same on generally available systems. Furthermore, some measurements may have been estimated through
extrapolation. Actual results may vary. Users of this document should verify the applicable data for their
specific environment.
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
C-1
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
Lenovo logo
ThinkPad
IBM is a trademark of International Business Machines Corporation in the United States, other countries,
or both, and is used under license.
Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or
both.
Intel and Pentium are trademarks of Intel Corporation in the United States, other countries, or both.
Other company, product, or service names may be trademarks or service marks of others.
C-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix D. Lenovo Statement of Limited Warranty
LSOLW-00 05/2005
Part 1 - General Terms
This Statement of Limited Warranty includes Part 1 - General Terms, Part 2 - Country-unique Terms, and Part 3 -
Warranty Information. The terms of Part 2 replace or modify those of Part 1. The warranties provided by Lenovo
Group Limited or one of its subsidiaries (called ″Lenovo″) in this Statement of Limited Warranty apply only to
Machines you purchase for your use, and not for resale. The term “Machine” means a Lenovo machine, its options,
features, conversions, upgrades or peripheral products, or any combination of them. The term “Machine” does not
include any software programs, whether pre-loaded with the Machine, installed subsequently or otherwise. Nothing
in this Statement of Limited Warranty affects any statutory rights of consumers that cannot be waived
or limited by contract.
What this Warranty Covers
Lenovo warrants that each Machine 1) is free from defects in materials and workmanship and 2)
conforms to Lenovo’s Official Published Specifications (“Specifications”) which are available on request.
The warranty period for the Machine starts on the original date of installation and is specified in Part 3 -
Warranty Information. The date on your invoice or sales receipt is the date of installation unless Lenovo
or your reseller informs you otherwise. Unless Lenovo specifies otherwise, these warranties apply only in
the country or region in which you purchased the Machine.
THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE ALL OTHER
WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION
OF EXPRESS OR IMPLIED WARRANTIES, SO THE ABOVE EXCLUSION MAY NOT APPLY TO
YOU. IN THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE WARRANTY
PERIOD. NO WARRANTIES APPLY AFTER THAT PERIOD. SOME STATES OR JURISDICTIONS
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU.
What this Warranty Does not Cover
This warranty does not cover the following:
v any software programs, whether pre-loaded or shipped with the Machine, or installed subsequently;
v failure resulting from misuse, accident, modification, unsuitable physical or operating environment, or
improper maintenance by you;
v failure caused by a product for which Lenovo is not responsible; and
v any non-Lenovo products, including those that Lenovo may procure and provide with or integrate into
a Lenovo Machine at your request.
The warranty is voided by removal or alteration of identification labels on the Machine or its parts.
Lenovo does not warrant uninterrupted or error-free operation of a Machine.
Any technical or other support provided for a Machine under warranty, such as assistance with "how-to"
questions and those regarding Machine set-up and installation, is provided WITHOUT WARRANTIES
OF ANY KIND.
How to Obtain Warranty Service
Warranty service may be provided by Lenovo, IBM, your reseller if authorized to perform warranty
service, or an authorized warranty service provider. Each of them is referred to as a “Service Provider.”
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
D-1
If the Machine does not function as warranted during the warranty period, contact a Service Provider. If
you do not register the Machine with Lenovo, you may be required to present proof of purchase as
evidence of your entitlement to warranty service.
What Lenovo Will Do to Correct Problems
When you contact a Service Provider for service, you must follow the problem determination and
resolution procedures that we specify. An initial diagnosis of your problem can be made either by a
technician over the telephone or electronically by access to a support website.
The type of warranty service applicable to your Machine is specified in Part 3 - Warranty Information.
You are responsible for downloading and installing designated software updates from a support web site
or from other electronic media, and following the instructions that your Service Provider provides.
Software updates may include basic input/output system code (called “BIOS”), utility programs, device
drivers, and other software updates.
If your problem can be resolved with a Customer Replaceable Unit (“CRU”) (e.g., keyboard, mouse,
speaker, memory, hard disk drive), your Service Provider will ship the CRU to you for you to install.
If the Machine does not function as warranted during the warranty period and your problem cannot be
resolved over the telephone or electronically, through your application of software updates, or with a
CRU, your Service Provider, will either, at its discretion, 1) repair it to make it function as warranted, or
2) replace it with one that is at least functionally equivalent. If your Service Provider is unable to do
either, you may return the Machine to your place of purchase and your money will be refunded.
As part of the warranty service, your Service Provider may also install selected engineering changes that
apply to the Machine.
Exchange of a Machine or Part
When the warranty service involves the exchange of a Machine or part, the item your Service Provider
replaces becomes Lenovo’s property and the replacement becomes yours. You represent that all removed
items are genuine and unaltered. The replacement may not be new, but will be in good working order
and at least functionally equivalent to the item replaced. The replacement assumes the warranty service
status of the replaced item.
Your Additional Responsibilities
Before your Service Provider exchanges a Machine or part, you agree to remove all features, parts,
options, alterations, and attachments not under warranty service.
You also agree to:
1. ensure that the Machine is free of any legal obligations or restrictions that prevent its exchange;
2. obtain authorization from the owner to have your Service Provider service a Machine that you do not
own; and
3. where applicable, before service is provided:
a. follow the service request procedures that your Service Provider provides;
b. backup or secure all programs, data, and funds contained in the Machine; and
c. provide your Service Provider with sufficient, free, and safe access to your facilities to permit
Lenovo to fulfill its obligations.
4. (a) ensure all information about identified or identifiable individuals (Personal Data) is deleted from
the Machine (to the extent technically possible), (b) allow your Service Provider or a supplier to
process on your behalf any remaining Personal Data as your Service Provider considers necessary to
fulfill its obligations under this Statement of Limited Warranty (which may include shipping the
Machine for such processing to other service locations around the world), and (c) ensure that such
processing complies with any laws applicable to such Personal Data.
D-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Limitation of Liability
Lenovo is responsible for loss of, or damage to, your Machine only while it is 1) in your Service
Provider’s possession or 2) in transit in those cases where Lenovo is responsible for the transportation
charges.
Neither Lenovo nor your Service Provider are responsible for any of your confidential, proprietary or
personal information contained in a Machine which you return for any reason. You should remove all
such information from the Machine prior to its return.
Circumstances may arise where, because of a default on Lenovo’s part or other liability, you are entitled
to recover damages from Lenovo. In each such instance, regardless of the basis on which you are entitled
to claim damages from Lenovo (including fundamental breach, negligence, misrepresentation, or other
contract or tort claim), except for any liability that cannot be waived or limited by applicable laws,
Lenovo is liable for no more than
1. damages for bodily injury (including death) and damage to real property and tangible personal
property for which Lenovo is legally liable; and
2. the amount of any other actual direct damages, up to the charges for the Machine that is subject of
the claim.
This limit also applies to Lenovo’s suppliers, resellers and your Service Provider. It is the maximum for
which Lenovo, its suppliers, resellers, and your Service Provider are collectively responsible.
UNDER NO CIRCUMSTANCES IS LENOVO, ITS SUPPLIERS, RESELLERS OR SERVICE
PROVIDERS LIABLE FOR ANY OF THE FOLLOWING EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES (OTHER THAN THOSE
UNDER THE FIRST ITEM LISTED ABOVE); 2) LOSS OF, OR DAMAGE TO, DATA; 3) SPECIAL,
INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL
DAMAGES; OR 4) LOST PROFITS, BUSINESS REVENUE, GOODWILL OR ANTICIPATED
SAVINGS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION
OR EXCLUSION MAY NOT APPLY TO YOU.
Governing Law
Both you and Lenovo consent to the application of the laws of the country in which you acquired the
Machine to govern, interpret, and enforce all of your and Lenovo’s rights, duties, and obligations arising
from, or relating in any manner to, the subject matter of this Statement of Limited Warranty, without
regard to conflict of law principles.
THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.
Jurisdiction
All of our rights, duties, and obligations are subject to the courts of the country in which you acquired
the Machine.
Part 2 - Country-unique Terms
AMERICAS
ARGENTINA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Ordinary
Commercial Court of the city of Buenos Aires.
Appendix D. Lenovo Statement of Limited Warranty D-3
Download from Www.Somanuals.com. All Manuals Search And Download.
BOLIVIA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the courts of
the city of La Paz.
BRAZIL
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the court of
Rio de Janeiro, RJ.
CHILE
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Civil
Courts of Justice of Santiago.
COLOMBIA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Judges of
the Republic of Colombia.
ECUADOR
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Judges of
Quito.
MEXICO
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Federal
Courts of Mexico City, Federal District.
PARAGUAY
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the courts of
the city of Asuncion.
PERU
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Judges
and Tribunals of the Judicial District of Lima, Cercado.
Limitation of Liability: The following is added at the end of this section:
In accordance with Article 1328 of the Peruvian Civil Code the limitations and exclusions specified in this
section will not apply to damages caused by Lenovo’s willful misconduct (″dolo″) or gross negligence
(″culpa inexcusable″).
URUGUAY
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the City of
Montevideo Court’s Jurisdiction.
VENEZUELA
Jurisdiction: The following is added after the first sentence:
Any litigation arising from this Statement of Limited Warranty will be settled exclusively by the Courts of
the Metropolitan Area Of the City of Caracas.
NORTH AMERICA
D-4 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
How to Obtain Warranty Service: The following is added to this Section:
To obtain warranty service from IBM service in Canada or the United States, call 1-800-IBM-SERV
(426-7378).
CANADA
Limitation of Liability: The following replaces item 1 of this section:
1. damages for bodily injury (including death) or physical harm to real property and tangible personal
property caused by Lenovo’s negligence; and
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first
sentence:
laws in the Province of Ontario.
UNITED STATES
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first
sentence:
laws of the State of New York.
ASIA PACIFIC
AUSTRALIA
What this Warranty Covers: The following paragraph is added to this section:
The warranties specified in this Section are in addition to any rights you may have under the Trade
Practices Act 1974 or other similar legislation and are only limited to the extent permitted by the
applicable legislation.
Limitation of Liability: The following is added to this section:
Where Lenovo is in breach of a condition or warranty implied by the Trade Practices Act 1974 or other
similar legislation, Lenovo’s liability is limited to the repair or replacement of the goods or the supply of
equivalent goods. Where that condition or warranty relates to right to sell, quiet possession or clear title,
or the goods are of a kind ordinarily acquired for personal, domestic or household use or consumption,
then none of the limitations in this paragraph apply.
Governing Law: The following replaces "laws of the country in which you acquired the Machine″ in the first
sentence:
laws of the State or Territory.
CAMBODIA AND LAOS
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first
sentence:
laws of the State of New York, United States of America.
CAMBODIA, INDONESIA, AND LAOS
Arbitration: The following is added under this heading:
Disputes arising out of or in connection with this Statement of Limited Warranty shall be finally settled
by arbitration which shall be held in Singapore in accordance with the Arbitration Rules of Singapore
International Arbitration Center (″SIAC Rules″) then in effect. The arbitration award shall be final and
binding for the parties without appeal and shall be in writing and set forth the findings of fact and the
conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being entitled to appoint one
arbitrator. The two arbitrators appointed by the parties shall appoint a third arbitrator who shall act as
chairman of the proceedings. Vacancies in the post of chairman shall be filled by the president of the
SIAC. Other vacancies shall be filled by the respective nominating party. Proceedings shall continue from
the stage they were at when the vacancy occurred.
Appendix D. Lenovo Statement of Limited Warranty D-5
Download from Www.Somanuals.com. All Manuals Search And Download.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other
party appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator
was validly and properly appointed.
All proceedings shall be conducted, including all documents presented in such proceedings, in the
English language. The English language version of this Statement of Limited Warranty prevails over any
other language version.
HONG KONG S.A.R. OF CHINA AND MACAU S.A.R. OF CHINA
Governing Law: The following replaces "laws of the country in which you acquired the Machine" in the first
sentence:
laws of Hong Kong Special Administrative Region of China.
INDIA
Limitation of Liability: The following replaces items 1 and 2 of this section:
1. liability for bodily injury (including death) or damage to real property and tangible personal property
will be limited to that caused by Lenovo’s negligence; and
2. as to any other actual damage arising in any situation involving nonperformance by Lenovo pursuant
to, or in any way related to the subject of this Statement of Limited Warranty, the charge paid by you
for the individual Machine that is the subject of the claim.
Arbitration: The following is added under this heading
Disputes arising out of or in connection with this Statement of Limited Warranty shall be finally settled
by arbitration which shall be held in Bangalore, India in accordance with the laws of India then in effect.
The arbitration award shall be final and binding for the parties without appeal and shall be in writing
and set forth the findings of fact and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being entitled to appoint one
arbitrator. The two arbitrators appointed by the parties shall appoint a third arbitrator who shall act as
chairman of the proceedings. Vacancies in the post of chairman shall be filled by the president of the Bar
Council of India. Other vacancies shall be filled by the respective nominating party. Proceedings shall
continue from the stage they were at when the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other
party appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator
was validly and properly appointed.
All proceedings shall be conducted, including all documents presented in such proceedings, in the
English language. The English language version of this Statement of Limited Warranty prevails over any
other language version.
JAPAN
Governing Law: The following sentence is added to this section:
Any doubts concerning this Statement of Limited Warranty will be initially resolved between us in good
faith and in accordance with the principle of mutual trust.
MALAYSIA
Limitation of Liability: The word ″SPECIAL″ in item 3 of the fifth paragraph is deleted.
NEW ZEALAND
What this Warranty Covers: The following paragraph is added to this section:
The warranties specified in this section are in addition to any rights you may have under the Consumer
Guarantees Act 1993 or other legislation which cannot be excluded or limited. The Consumer Guarantees
Act 1993 will not apply in respect of any goods which Lenovo provides, if you require the goods for the
purposes of a business as defined in that Act.
D-6 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Limitation of Liability: The following is added to this section:
Where Machines are not acquired for the purposes of a business as defined in the Consumer Guarantees
Act 1993, the limitations in this Section are subject to the limitations in that Act.
PEOPLE’S REPUBLIC OF CHINA (PRC)
Governing Law: The following replaces ″laws of the country in which you acquired the Machine″ in the first
sentence:
laws of the State of New York, United States of America (except when local law requires otherwise).
PHILIPPINES
Limitation of Liability: Item 3 in the fifth paragraph is replaced by the following:
SPECIAL (INCLUDING NOMINAL AND EXEMPLARY DAMAGES), MORAL, INCIDENTAL, OR
INDIRECT DAMAGES FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; OR
Arbitration: The following is added: under this heading
Disputes arising out of or in connection with this Statement of Limited Warranty shall be finally settled
by arbitration which shall be held in Metro Manila, Philippines in accordance with the laws of the
Philippines then in effect. The arbitration award shall be final and binding for the parties without appeal
and shall be in writing and set forth the findings of fact and the conclusions of law.
The number of arbitrators shall be three, with each side to the dispute being entitled to appoint one
arbitrator. The two arbitrators appointed by the parties shall appoint a third arbitrator who shall act as
chairman of the proceedings. Vacancies in the post of chairman shall be filled by the president of the
Philippine Dispute Resolution Center, Inc.. Other vacancies shall be filled by the respective nominating
party. Proceedings shall continue from the stage they were at when the vacancy occurred.
If one of the parties refuses or otherwise fails to appoint an arbitrator within 30 days of the date the other
party appoints its, the first appointed arbitrator shall be the sole arbitrator, provided that the arbitrator
was validly and properly appointed.
All proceedings shall be conducted, including all documents presented in such proceedings, in the
English language. The English language version of this Statement of Limited Warranty prevails over any
other language version.
SINGAPORE
Limitation of Liability: The words ″SPECIAL″ and ″ECONOMIC″ in item 3 in the fifth paragraph are deleted.
EUROPE, MIDDLE EAST, AFRICA (EMEA)
THE FOLLOWING TERMS APPLY TO ALL EMEA COUNTRIES:
The terms of this Statement of Limited Warranty apply to Machines purchased from Lenovo or a Lenovo
reseller.
How to Obtain Warranty Service:
Add the following paragraph in Western Europe (Andorra, Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Monaco, Netherlands, Norway, Poland, Portugal, San Marino, Slovakia, Slovenia, Spain,
Sweden, Switzerland, United Kingdom, Vatican State, and any country subsequently added to the European Union,
as from the date of accession):
The warranty for Machines acquired in Western Europe shall be valid and applicable in all Western
Europe countries provided the Machines have been announced and made available in such countries.
Appendix D. Lenovo Statement of Limited Warranty D-7
Download from Www.Somanuals.com. All Manuals Search And Download.
If you purchase a Machine in one of the Western European countries, as defined above, you may obtain
warranty service for that Machine in any of those countries from a Service Provider, provided the
Machine has been announced and made available by Lenovo in the country in which you wish to obtain
service.
If you purchased a Personal Computer Machine in Albania, Armenia, Belarus, Bosnia and Herzegovina,
Bulgaria, Croatia, Czech Republic, Georgia, Hungary, Kazakhstan, Kyrgyzstan, Federal Republic of
Yugoslavia, Former Yugoslav Republic of Macedonia (FYROM), Moldova, Poland, Romania, Russia,
Slovak Republic, Slovenia, or Ukraine, you may obtain warranty service for that Machine in any of those
countries from a Service Provider, provided the Machine has been announced and made available by
Lenovo in the country in which you wish to obtain service.
If you purchase a Machine in a Middle Eastern or African country, you may obtain warranty service for
that Machine from a Service Provider within the country of purchase, provided the Machine has been
announced and made available by Lenovo in that country. Warranty service in Africa is available within
50 kilometers of a Service Provider. You are responsible for transportation costs for Machines located
outside 50 kilometers of a Service Provider.
Governing Law:
The phrase "the laws of the country in which you acquired the Machine" is replaced by:
1) ″the laws of Austria″ in Albania, Armenia, Azerbaijan, Belarus, Bosnia-Herzegovina, Bulgaria,
Croatia, Georgia, Hungary, Kazakhstan, Kyrgyzstan, FYR Macedonia, Moldova, Poland, Romania,
Russia, Slovakia, Slovenia, Tajikistan, Turkmenistan, Ukraine, Uzbekistan, and FR Yugoslavia; 2) ″the
laws of France″ in Algeria, Benin, Burkina Faso, Cameroon, Cape Verde, Central African Republic,
Chad, Comoros, Congo Republic, Djibouti, Democratic Republic of Congo, Equatorial Guinea, French
Guiana, French Polynesia, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Madagascar,
Mali, Mauritania, Mauritius, Mayotte, Morocco, New Caledonia, Niger, Reunion, Senegal, Seychelles,
Togo, Tunisia, Vanuatu, and Wallis & Futuna; 3) ″the laws of Finland″ in Estonia, Latvia, and Lithuania;
4) ″the laws of England″ in Angola, Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana,
Jordan, Kenya, Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar,
Rwanda, Sao Tome, Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab Emirates, the
United Kingdom, West Bank/Gaza, Yemen, Zambia, and Zimbabwe; and 5) ″the laws of South Africa″
in South Africa, Namibia, Lesotho and Swaziland.
Jurisdiction: The following exceptions are added to this section:
1) In Austria the choice of jurisdiction for all disputes arising out of this Statement of Limited Warranty
and relating thereto, including its existence, will be the competent court of law in Vienna, Austria
(Inner-City); 2) in Angola, Bahrain, Botswana, Burundi, Egypt, Eritrea, Ethiopia, Ghana, Jordan, Kenya,
Kuwait, Liberia, Malawi, Malta, Mozambique, Nigeria, Oman, Pakistan, Qatar, Rwanda, Sao Tome,
Saudi Arabia, Sierra Leone, Somalia, Tanzania, Uganda, United Arab Emirates, West Bank/Gaza,
Yemen, Zambia, and Zimbabwe all disputes arising out of this Statement of Limited Warranty or related
to its execution, including summary proceedings, will be submitted to the exclusive jurisdiction of the
English courts; 3) in Belgium and Luxembourg, all disputes arising out of this Statement of Limited
Warranty or related to its interpretation or its execution, the law, and the courts of the capital city, of the
country of your registered office and/or commercial site location only are competent; 4) in France,
Algeria, Benin, Burkina Faso, Cameroon, Cape Verde, Central African Republic, Chad, Comoros,
Congo Republic, Djibouti, Democratic Republic of Congo, Equatorial Guinea, French Guiana, French
Polynesia, Gabon, Gambia, Guinea, Guinea-Bissau, Ivory Coast, Lebanon, Madagascar, Mali,
Mauritania, Mauritius, Mayotte, Morocco, New Caledonia, Niger, Reunion, Senegal, Seychelles, Togo,
Tunisia, Vanuatu, and Wallis & Futuna all disputes arising out of this Statement of Limited Warranty or
related to its violation or execution, including summary proceedings, will be settled exclusively by the
Commercial Court of Paris; 5) in Russia, all disputes arising out of or in relation to the interpretation, the
violation, the termination, the nullity of the execution of this Statement of Limited Warranty shall be
settled by Arbitration Court of Moscow; 6) in South Africa, Namibia, Lesotho and Swaziland, both of us
agree to submit all disputes relating to this Statement of Limited Warranty to the jurisdiction of the High
Court in Johannesburg; 7) in Turkey all disputes arising out of or in connection with this Statement of
D-8 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty shall be resolved by the Istanbul Central (Sultanahmet) Courts and Execution
Directorates of Istanbul, the Republic of Turkey; 8) in each of the following specified countries, any legal
claim arising out of this Statement of Limited Warranty will be brought before, and settled exclusively by,
the competent court of a) Athens for Greece, b) Tel Aviv-Jaffa for Israel, c) Milan for Italy, d) Lisbon for
Portugal, and e) Madrid for Spain; and 9) in the United Kingdom, both of us agree to submit all
disputes relating to this Statement of Limited Warranty to the jurisdiction of the English courts.
Arbitration: The following is added under this heading:
In Albania, Armenia, Azerbaijan, Belarus, Bosnia-Herzegovina, Bulgaria, Croatia, Georgia, Hungary,
Kazakhstan, Kyrgyzstan, FYR Macedonia, Moldova, Poland, Romania, Russia, Slovakia, Slovenia,
Tajikistan, Turkmenistan, Ukraine, Uzbekistan, and FR Yugoslavia all disputes arising out of this
Statement of Limited Warranty or related to its violation, termination or nullity will be finally settled
under the Rules of Arbitration and Conciliation of the International Arbitral Center of the Federal
Economic Chamber in Vienna (Vienna Rules) by three arbitrators appointed in accordance with these
rules. The arbitration will be held in Vienna, Austria, and the official language of the proceedings will be
English. The decision of the arbitrators will be final and binding upon both parties. Therefore, pursuant
to paragraph 598 (2) of the Austrian Code of Civil Procedure, the parties expressly waive the application
of paragraph 595 (1) figure 7 of the Code. Lenovo may, however, institute proceedings in a competent
court in the country of installation.
In Estonia, Latvia and Lithuania all disputes arising in connection with this Statement of Limited
Warranty will be finally settled in arbitration that will be held in Helsinki, Finland in accordance with the
arbitration laws of Finland then in effect. Each party will appoint one arbitrator. The arbitrators will then
jointly appoint the chairman. If arbitrators cannot agree on the chairman, then the Central Chamber of
Commerce in Helsinki will appoint the chairman.
EUROPEAN UNION (EU)
THE FOLLOWING TERMS APPLY TO ALL EU COUNTRIES:
The warranty for Machines acquired in EU countries is valid and applicable in all EU countries provided
the Machines have been announced and made available in such countries.
How to Obtain Warranty Service: The following is added to this section:
To obtain warranty service from IBM service in EU countries, see the telephone listing in Part 3 -
Warranty Information.
You may contact IBM service at the following address:
IBM Warranty & Service Quality Dept.
PO Box 30
Spango Valley
Greenock
Scotland PA16 0AH
CONSUMERS
Consumers have legal rights under applicable national legislation governing the sale of consumer goods.
Such rights are not affected by the warranties provided in this Statement of Limited Warranty.
AUSTRIA, DENMARK, FINLAND, GREECE, ITALY, NETHERLANDS, NORWAY, PORTUGAL,
SPAIN, SWEDEN AND SWITZERLAND
Limitation of Liability: The following replaces the terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. Lenovo’s liability for any damages and losses that may arise as a consequence of the fulfillment of its
obligations under or in connection with this Statement of Limited Warranty or due to any other cause
related to this Statement of Limited Warranty is limited to the compensation of only those damages
and losses proved and actually arising as an immediate and direct consequence of the non-fulfillment
of such obligations (if Lenovo is at fault) or of such cause, for a maximum amount equal to the
charges you paid for the Machine.
Appendix D. Lenovo Statement of Limited Warranty D-9
Download from Www.Somanuals.com. All Manuals Search And Download.
The above limitation shall not apply to damages for bodily injuries (including death) and damages to
real property and tangible personal property for which Lenovo is legally liable.
2. UNDER NO CIRCUMSTANCES IS LENOVO, ITS SUPPLIERS, RESELLERS OR SERVICE
PROVIDERS LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR INDIRECT
DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; 3) LOST PROFITS,
EVEN IF THEY ARISE AS AN IMMEDIATE CONSEQUENCE OF THE EVENT THAT
GENERATED THE DAMAGES; OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR
ANTICIPATED SAVINGS.
FRANCE AND BELGIUM
Limitation of Liability: The following replaces the terms of this section in its entirety:
Except as otherwise provided by mandatory law:
1. Lenovo’s liability for any damages and losses that may arise as a consequence of the fulfillment of its
obligations under or in connection with this Statement of Limited Warranty is limited to the
compensation of only those damages and losses proved and actually arising as an immediate and
direct consequence of the non-fulfillment of such obligations (if Lenovo is at fault), for a maximum
amount equal to the charges you paid for the Machine that has caused the damages.
The above limitation shall not apply to damages for bodily injuries (including death) and damages to
real property and tangible personal property for which Lenovo is legally liable.
2. UNDER NO CIRCUMSTANCES IS LENOVO, ITS SUPPLIERS, RESELLERS OR SERVICE
PROVIDERS LIABLE FOR ANY OF THE FOLLOWING, EVEN IF INFORMED OF THEIR
POSSIBILITY: 1) LOSS OF, OR DAMAGE TO, DATA; 2) INCIDENTAL OR INDIRECT
DAMAGES, OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES; 3) LOST PROFITS,
EVEN IF THEY ARISE AS AN IMMEDIATE CONSEQUENCE OF THE EVENT THAT
GENERATED THE DAMAGES; OR 4) LOSS OF BUSINESS, REVENUE, GOODWILL, OR
ANTICIPATED SAVINGS.
THE FOLLOWING TERMS APPLY TO THE COUNTRY SPECIFIED:
AUSTRIA
The provisions of this Statement of Limited Warranty replace any applicable statutory warranties.
What this Warranty Covers: The following replaces the first sentence of the first paragraph of this section:
The warranty for a Lenovo Machine covers the functionality of the Machine for its normal use and the
Machine’s conformity to its Specifications.
The following paragraphs are added to this section:
The limitation period for consumers in action for breach of warranty is the statutory period as a
minimum. In case your Service Provider is unable to repair a Lenovo Machine, you can alternatively ask
for a partial refund as far as justified by the reduced value of the unrepaired Machine or ask for a
cancellation of the respective agreement for such Machine and get your money refunded.
The second paragraph does not apply.
What Lenovo Will Do to Correct Problems: The following is added to this section:
During the warranty period, Lenovo will reimburse you for the transportation charges for the delivery of
the failing Machine to IBM Service.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages
caused by Lenovo with fraud or gross negligence and for express warranty.
The following sentence is added to the end of item 2:
Lenovo’s liability under this item is limited to the violation of essential contractual terms in cases of
ordinary negligence.
D-10 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
EGYPT
Limitation of Liability: The following replaces item 2 in this section:
as to any other actual direct damages, Lenovo’s liability will be limited to the total amount you paid for
the Machine that is the subject of the claim.
Applicability of suppliers, resellers, and Service Providers (unchanged).
FRANCE
Limitation of Liability: The following replaces the second sentence of the first paragraph of this section:
In such instances, regardless of the basis on which you are entitled to claim damages from Lenovo,
Lenovo is liable for no more than: (items 1 and 2 unchanged).
GERMANY
What this Warranty Covers: The following replaces the first sentence of the first paragraph of this section:
The warranty for a Lenovo Machine covers the functionality of the Machine for its normal use and the
Machine’s conformity to its Specifications.
The following paragraphs are added to this section:
The minimum warranty period for Machines is twelve months. In case your Service Provider is unable to
repair a Lenovo Machine, you can alternatively ask for a partial refund as far as justified by the reduced
value of the unrepaired Machine or ask for a cancellation of the respective agreement for such Machine
and get your money refunded.
The second paragraph does not apply.
What Lenovo Will Do to Correct Problems: The following is added to this section:
During the warranty period, transportation for delivery of the failing Machine to Lenovo or IBM service
will be at Lenovo’s expense.
Limitation of Liability: The following paragraph is added to this section:
The limitations and exclusions specified in the Statement of Limited Warranty will not apply to damages
caused by Lenovo with fraud or gross negligence and for express warranty.
The following sentence is added to the end of item 2:
Lenovo’s liability under this item is limited to the violation of essential contractual terms in cases of
ordinary negligence.
HUNGARY
Limitation of Liability: The following is added at the end of this section:
The limitation and exclusion specified herein shall not apply to liability for a breach of contract damaging
life, physical well-being, or health that has been caused intentionally, by gross negligence, or by a
criminal act.
The parties accept the limitations of liability as valid provisions and state that the Section 314.(2) of the
Hungarian Civil Code applies as the acquisition price as well as other advantages arising out of the
present Statement of Limited Warranty balance this limitation of liability.
IRELAND
What this Warranty Covers: The following is added to this section:
Except as expressly provided in these terms and conditions, all statutory conditions, including all
warranties implied, but without prejudice to the generality of the foregoing all warranties implied by the
Sale of Goods Act 1893 or the Sale of Goods and Supply of Services Act 1980 are hereby excluded.
Limitation of Liability: The following replaces the terms of section in its entirety:
For the purposes of this section, a “Default” means any act, statement, omission, or negligence on the
part of Lenovo in connection with, or in relation to, the subject matter of this Statement of Limited
Appendix D. Lenovo Statement of Limited Warranty D-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty in respect of which Lenovo is legally liable to you, whether in contract or tort. A number of
Defaults which together result in, or contribute to, substantially the same loss or damage will be treated
as one Default occurring on the date of occurrence of the last such Default.
Circumstances may arise where, because of a Default, you are entitled to recover damages from Lenovo.
This section sets out the extent of Lenovo’s liability and your sole remedy.
1. Lenovo will accept unlimited liability for death or personal injury caused by the negligence of
Lenovo.
2. Subject always to the Items for Which Lenovo is Not Liable below, Lenovo will accept unlimited
liability for physical damage to your tangible property resulting from the negligence of Lenovo.
3. Except as provided in items 1 and 2 above, Lenovo’s entire liability for actual damages for any one
Default will not in any event exceed 125% of the amount you paid for the Machine directly relating to
the Default.
Items for Which Lenovo is Not Liable
Save with respect to any liability referred to in item 1 above, under no circumstances is Lenovo, its
suppliers, resellers or Service Providers liable for any of the following, even if Lenovo or they were
informed of the possibility of such losses:
1. loss of, or damage to, data;
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
SLOVAKIA
Limitation of Liability: The following is added to the end of the last paragraph:
The limitations apply to the extent they are not prohibited under §§ 373-386 of the Slovak Commercial
Code.
SOUTH AFRICA, NAMIBIA, BOTSWANA, LESOTHO AND SWAZILAND
Limitation of Liability: The following is added to this section:
Lenovo’s entire liability to you for actual damages arising in all situations involving nonperformance by
Lenovo in respect of the subject matter of this Statement of Warranty will be limited to the charge paid
by you for the individual Machine that is the subject of your claim from Lenovo.
UNITED KINGDOM
Limitation of Liability: The following replaces the terms of this section is in its entirety:
For the purposes of this section, a “Default” means any act, statement, omission, or negligence on the
part of Lenovo in connection with, or in relation to, the subject matter of this Statement of Limited
Warranty in respect of which Lenovo is legally liable to you, whether in contract or tort. A number of
Defaults which together result in, or contribute to, substantially the same loss or damage will be treated
as one Default.
Circumstances may arise where, because of a Default, you are entitled to recover damages from Lenovo.
This section sets out the extent of Lenovo’s liability and your sole remedy.
1. Lenovo will accept unlimited liability for:
a. death or personal injury caused by the negligence of Lenovo; and
b. any breach of its obligations implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of
the Supply of Goods and Services Act 1982, or any statutory modification or re-enactment of either
such Section.
2. Lenovo will accept unlimited liability, subject always to the Items for Which Lenovo is Not Liable
below, for physical damage to your tangible property resulting from the negligence of Lenovo.
3. Lenovo’s entire liability for actual damages for any one Default will not in any event, except as
provided in items 1 and 2 above, exceed 125% of the total purchase price payable or the charges for
the Machine directly relating to the Default.
D-12 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
These limits also apply to Lenovo’s suppliers, resellers and Service Providers. They state the maximum
for which Lenovo and such suppliers, resellers and Service Providers are collectively responsible.
Items for Which Lenovo is Not Liable
Save with respect to any liability referred to in item 1 above, under no circumstances is Lenovo or any of
its suppliers, resellers or Service Providers liable for any of the following, even if Lenovo or they were
informed of the possibility of such losses:
1. loss of, or damage to, data;
2. special, indirect, or consequential loss; or
3. loss of profits, business, revenue, goodwill, or anticipated savings.
Part 3 - Warranty Information
This Part 3 provides information regarding the warranty applicable to your Machine, including the
warranty period and type of warranty service Lenovo provides.
Warranty Period
The warranty period may vary by country or region and is specified in the table below. NOTE: ″Region″
means either Hong Kong or Macau Special Administrative Region of China.
A warranty period of 1 year on parts and 1 year on labor means that Lenovo provides warranty service
during the first year of the warranty period.
USB 2.0 Super Multi-Burner Drive
Type of Warranty
Country or Region of Purchase
Warranty Period
Service
Worldwide
1 year
7
Types of Warranty Service
If required, your Service Provider will provide repair or exchange service depending on the type of
warranty service specified for your Machine in the above table and as described below. Scheduling of
service will depend upon the time of your call and is subject to parts availability. Service levels are
response time objectives and are not guaranteed. The specified level of warranty service may not be
available in all worldwide locations, additional charges may apply outside your Service Provider’s
normal service area, contact your local Service Provider representative or your reseller for country and
location specific information.
1. Customer Replaceable Unit (″CRU″) Service
Lenovo will ship CRUs to you for you to install, Tier 1 CRUs are easy to install whereas Tier 2 CRUs
require some technical skill and tools. CRU information and replacement instructions are shipped
with your Machine and are available from Lenovo at any time on your request. You may request that
a Service Provider install CRUs, at no additional charge, under the type of warranty service
designated for your Machine. Lenovo specifies in the materials shipped with a replacement CRU
whether a defective CRU must be returned. When return is required, 1) return instructions and a
container are shipped with the replacement CRU, and 2) you may be charged for the replacement
CRU if Lenovo does not receive the defective CRU within 30 days of your receipt of the replacement.
2. On-site Service
Your Service Provider will either repair or exchange the failing Machine at your location and verify its
operation. You must provide suitable working area to allow disassembly and reassembly of the
Lenovo Machine. The area must be clean, well lit and suitable for the purpose. For some Machines,
certain repairs may require sending the Machine to a designated service center.
3. Courier or Depot Service *
Appendix D. Lenovo Statement of Limited Warranty D-13
Download from Www.Somanuals.com. All Manuals Search And Download.
You will disconnect the failing Machine for collection arranged by your Service Provider. A shipping
container will be provided to you for you to return your Machine to a designated service center. A
courier will pick up your Machine and deliver it to the designated service center. Following its repair
or exchange, the service center will arrange the return delivery of the Machine to your location. You
are responsible for its installation and verification.
4. Customer Carry-In or Mail-In Service
You will deliver or mail as your Service Provider specifies (prepaid unless specified otherwise) the
failing Machine suitably packaged to a designated location. After the Machine has been repaired or
exchanged, it will be made available for your collection or, for Mail-in Service, the Machine will be
returned to you at Lenovo’s expense, unless your Service Provider specifies otherwise. You are
responsible for the subsequent installation and verification of the Machine.
5. CRU and On-site Service
This type of Warranty Service is a combination of Type 1 and Type 2 (see above).
6. CRU and Courier or Depot Service
This type of Warranty Service is a combination of Type 1 and Type 3 (see above).
7. CRU and Customer Carry-In or Mail-In Service
This type of Warranty Service is a combination of Type 1 and Type 4 (see above).
When a 5, 6 or 7 type of warranty service is listed, your Service Provider will determine which type of
warranty service is appropriate for the repair.
* This type of service is called ThinkPad EasyServ or EasyServ in some countries.
To obtain warranty service contact a Service Provider. In Canada or the United States, call
1-800-IBM-SERV (426-7378). In other countries, see the telephone numbers below.
Worldwide telephone list
Phone numbers are subject to change without notice. For the most current phone numbers, go to
Country or Region
Telephone Number
Africa
Africa: +44 (0)1475-555-055
South Africa: +27-11-3028888 and 0800110756
Central Africa: Contact your Lenovo service provider
Argentina
Australia
Austria
0800-666-0011 (Spanish)
131-426 (English)
Up and running support: 01-24592-5901
Warranty service and support: 01-211-454-610
(German)
Belgium
Up and running support: 02-210-9820 (Dutch)
Up and running support: 02-210-9800 (French)
Warranty service and support: 02-225-3611 (Dutch, French)
Bolivia
Brazil
0800-0189 (Spanish)
Sao Paulo region: (11) 3889-8986
Toll free outside Sao Paulo region: 0800-7014-815
(Brazilian Portuguese)
Canada
1-800-565-3344 (English, French)
In Toronto only call: 416-383-3344
Chile
800-224-488 (Spanish)
China
800-810-1818 (Mandarin)
D-14 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
China (Hong Kong
S.A.R.)
Home PC: 852-2825-7799
Commercial PC: 852-8205-0333
ThinkPad and WorkPad: 852-2825-6580
(Cantonese, English, Putonghua)
Colombia
Costa Rica
Croatia
1-800-912-3021 (Spanish)
284-3911 (Spanish)
0800-0426
Cyprus
+357-22-841100
Czech Republic
Denmark
+420-2-7213-1316
Up and running support: 4520-8200
Warranty service and support: 7010-5150
(Danish)
Dominican Republic 566-4755
566-5161 ext. 8201
Toll Free within the Dominican Republic: 1-200-1929
(Spanish)
Ecuador
El Salvador
Estonia
1-800-426911 (Spanish)
250-5696 (Spanish)
+386-61-1796-699
Finland
Up and running support: 09-459-6960
Warranty service and support: +358-800-1-4260
(Finnish)
France
Up and running support: 0238-557-450
Warranty service and support (hardware): 0810-631-213
Warranty service and support (software): 0810-631-020
(French)
Germany
Up and running support: 07032-15-49201
Warranty service and support: 01805-25-35-58
(German)
Greece
+30-210-680-1700
335-8490 (Spanish)
Guatemala
Honduras
Tegucigalpa & San Pedro Sula: 232-4222
San Pedro Sula: 552-2234
(Spanish)
Hungary
India
+36-1-382-5720
1600-44-6666
Alternate Toll Free: +91-80-2678-8940
(English)
Indonesia
Ireland
Israel
800-140-3555
+62-21-251-2955
(English, Bahasa Indonesian)
Up and running support: 01-815-9202
Warranty service and support: 01-881-1444
(English)
Hebrew
English
+972-3-531-3900
+972-3-531-3900
8:30AM - 5:00PM
Sunday - Thursday (Local time)
Appendix D. Lenovo Statement of Limited Warranty D-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Italy
Up and running support: 02-7031-6101
Warranty service and support: +39-800-820094
(Italian)
Japan
Desktop:
Toll free: 0120-887-870
For International: +81-46-266-4724
ThinkPad:
Toll free: 0120-887-874
For International: +81-46-266-4724
Both of the above numbers will be answered with a Japanese language voice prompt. For
telephone support in English, please wait for the Japanese voice prompt to end, and an
operator will answer. Please ask for ″English support please,″ and your call will be
transferred to an English speaking operator.
PC Software:
0120-558-695
Overseas calls: +81-44-200-8666
(Japanese)
Korea
1588-5801 (Korean)
Latvia
+386-61-1796-699
Lithuania
Luxembourg
Malaysia
Malta
+386-61-1796-699
+352-298-977-5063 (French)
1800-88-8558 (English, Bahasa Melayu)
+356-23-4175
Mexico
001-866-434-2080 (Spanish)
+44 (0)1475-555-055
Middle East
Netherlands
New Zealand
Nicaragua
Norway
+31-20-514-5770 (Dutch)
0800-446-149 (English)
255-6658 (Spanish)
Up and running support: 6681-1100
Warranty service and support: 8152-1550
(Norwegian)
Panama
Peru
206-6047 (Spanish)
0-800-50-866 (Spanish)
Philippines
1800-1888-1426
+63-2-995-8420
(English, Philipino)
Poland
+48-22-878-6999
Portugal
+351-21-892-7147 (Portuguese)
+4-021-224-4015
Romania
Russian Federation
Singapore
Slovakia
+7-095-940-2000 (Russian)
1800-3172-888 (English, Bahasa, Melayu)
+421-2-4954-1217
Slovenia
+386-1-4796-699
D-16 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Country or Region
Telephone Number
Spain
91-714-7983
91-397-6503
(Spanish)
Sri Lanka
Sweden
+94-11-2448-442 (English)
Up and running support: 08-477-4420
Warranty service and support: 077-117-1040
(Swedish)
Switzerland
Up and running support: 058-333-0900
Warranty service and support: 0800-55-54-54
(German, French, Italian)
Taiwan
Thailand
Turkey
886-2-8723-9799 (Mandarin)
1-800-299-229 (Thai)
00800-4463-2041
(Turkish)
United Kingdom
Up and running support: 01475-555-055
Warranty service and support (hardware): 08705-500-900
Warranty service and support (software): 08457-151-516
(English)
United States
1-800-426-7378
(English)
Uruguay
Venezuela
Vietnam
000-411-005-6649 (Spanish)
0-800-100-2011 (Spanish)
For northern area and Hanoi: 84-4-8436675
For southern area and Ho Chi Minh City: 84-8-829-5160
(English, Vietnamese)
Guarantee supplement for Mexico
This supplement is considered part of Lenovo’s Statement of Limited Warranty and shall be effective
solely and exclusively for products distributed and commercialized within Territory of the Mexican
United States. In the event of a conflict, the terms of this supplement shall apply.
All software programs pre-loaded in the equipment shall only have a thirty- (30) day guarantee for
installation defects from the date of purchase. Lenovo is not responsible for the information in such
software programs and/or any additional software programs installed by you or installed after purchase
of the product.
Services not chargeable to the guarantee shall be charged to the final user, prior an authorization.
In the event that warranty repair is required please call the Customer Support Center at 001-866-434-2080,
where you will be directed to the nearest Authorized Service Center. Should no Authorized Service
Center exist in your city, location or within 70 kilometers of your city or location, the guarantee includes
any reasonable delivery charges related to the transportation of the product to our nearest Authorized
Service Center. Please call the nearest Authorized Service Center to obtain the necessary approvals or
information concerning the shipment of the product and the shipment address.
To obtain a list of Authorized Service Centers, please visit:
Appendix D. Lenovo Statement of Limited Warranty D-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufactured by:
SCI Systems de México, S.A. de C.V.
Av. De la Solidaridad Iberoamericana No. 7020
Col. Club de Golf Atlas
El Salto, Jalisco, México
C.P. 45680,
Tel. 01-800-3676900
Marketing by:
Lenovo de México, Comercialización y
Servicios, S. A. de C. V.
Alfonso Nápoles Gándara No 3111
Parque Corporativo de Peña Blanca
Delegación Álvaro Obregón
México, D.F., México
C.P. 01210,
Tel. 01-800-00-325-00
D-18 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix E. Electronic emissions notices
The following information refers to the USB 2.0 Super Multi-Burner Drive.
Federal Communications Commission (FCC) Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, used, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
v
v
v
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
v
Consult an authorized dealer or service representative for help.
Lenovo is not responsible for any radio or television interference caused by using other than
recommended cables or connectors or by unauthorized changes or modifications to this equipment.
Unauthorized changes or modifications could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Responsible party:
Lenovo (United States) Incorporated
One Manhattanville Road
Purchase, New York 10577
Telephone: (919) 254-0532
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Industry Canada Class B emission compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
Avis de conformité à la réglementation d’Industrie Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
EU-EMC Directive (89/336/EG) EN 55022 class B Statement of Compliance
Deutschsprachiger EU Hinweis:
© Lenovo 2006. Portions © IBM Corp. 2003.
Download from Www.Somanuals.com. All Manuals Search And Download.
E-1
Hinweis für Geräte der Klasse B EU-Richtlinie zur ElektromagnetischenVerträglichkeit Dieses Produkt
entspricht den Schutzanforderungen der EU-Richtlinie 89/336/EWG zur Angleichung der
Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-Mitgliedsstaaten.
und hält die Grenzwerte der EN 55022 Klasse B ein.
Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu
betreiben. Des Weiteren dürfen auch nur von der Lenovo empfohlene Kabel angeschlossen werden.
Lenovo übernimmt keine Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt
ohne Zustimmung der Lenovo verändert bzw. wenn Erweiterungskomponenten von Fremdherstellern
ohne Empfehlung der Lenovo gesteckt/eingebaut werden.
Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Geräten Dieses
Produkt entspricht dem ″Gesetz über die elektromagnetische Verträglichkeit von Geräten (EMVG)″. Dies
ist die Umsetzung der EU-Richtlinie 89/336/EWG in der Bundesrepublik Deutschland.
Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von
Geräten (EMVG) vom 18. September 1998 (bzw. der EMC EG Richtlinie 89/336) für Geräte der Klasse
B Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das
EG-Konformitätszeichen - CE - zu führen.
Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland)
GmbH, Pascalstr. 100, D-70569 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4:
Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.)
European Union - Compliance to the Electromagnetic Compatibility Directive
This product is in conformity with the protection requirements of EU Council Directive 89/336/ECC on
the approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo
cannot accept responsibility for any failure to satisfy the protection requirements resulting from a
non-recommended modification of the product, including the fitting of option cards from other
manufacturers.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication devices.
Avis de conformité à la directive de l’Union Européenne
Le présent produit satisfait aux exigences de protection énoncées dans la directive 89/336/CEE du
Conseil concernant le rapprochement des législations des Etats membres relatives à la compatibilité
électromagnétique. Lenovo décline toute responsabilité en cas de non-respect de cette directive résultant
d’une modification non recommandée du produit, y compris l’ajout de cartes en option non Lenovo.
Ce produit respecte les limites des caractéristiques d’immunité des appareils de traitement de
l’information définies par la classe B de la norme européenne EN 55022 (CISPR 22). La conformité aux
spécifications de la classe B offre une garantie acceptable contre les perturbations avec les appareils de
communication agréés, dans les zones résidentielles.
Unión Europea - Normativa EMC
Este producto satisface los requisitos de protección del Consejo de la UE, Directiva 89/336/CEE en lo que
a la legislatura de los Estados Miembros sobre compatibilidad electromagnética se refiere.
E-2 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Lenovo no puede aceptar responsabilidad alguna si este producto deja de satisfacer dichos requisitos de
protección como resultado de una modificación no recomendada del producto, incluyendo el ajuste de
tarjetas de opción que no sean Lenovo.
Este producto ha sido probado y satisface los límites para Equipos Informáticos Clase B de conformidad
con el Estándar Europeo EN 55022. Los límites para los equipos de Clase B se han establecido para
entornos residenciales típicos a fin de proporcionar una protección razonable contra las interferencias con
dispositivos de comunicación licenciados.
Unione Europea - Directiva EMC (Conformidad électromagnética)
Questo prodotto è conforme alle normative di protezione ai sensi della Direttiva del Consiglio
dell’Unione Europea 89/336/CEE sull’armonizzazione legislativa degli stati membri in materia di
compatibilità elettromagnetica.
Lenovo non accetta responsabilità alcuna per la mancata conformità alle normative di protezione dovuta
a modifiche non consigliate al prodotto, compresa l’installazione di schede e componenti di marca diversa
da Lenovo.
Le prove effettuate sul presente prodotto hanno accertato che esso rientra nei limiti stabiliti per le
apparecchiature di informatica Classe B ai sensi del Norma Europea EN 55022. I limiti delle
apparecchiature della Classe B sono stati stabiliti al fine di fornire ragionevole protezione da interferenze
mediante dispositivi di comunicazione in concessione in ambienti residenziali tipici.
Korea Class B Compliance
Japan VCCI Class B Compliance
Japanese statement of compliance for products less than or equal to 20 A per phase
Appendix E. Electronic emissions notices E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
E-4 USB 2.0 Super Multi-Burner Drive User’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Number: 40Y8699
Printed in USA
(1P) P/N: 40Y8699
Download from Www.Somanuals.com. All Manuals Search And Download.
|