LD63MU
OWNER's MANUAL
Mobile Video System
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4
SEL
CLK
COMPACT
TA/AF
OPEN
E
O
N
DIGITAL VIDEO
VOL-
BND
CH 1-6
IR
APS
MOD
VOL+
COMPACT
DISP
DIGITAL AUDIO
MU/PTY
AUX IN
DVD/RECEIVER CONTROL
POWER
REPEAT
MUTE
PLAY/PAUSE
STOP
ANGLE
MO/ST
ZOOM
MENU
LO/DX
MODE
EQ
CLK
OSD
BAND
TITLE/PBC
A/PS
VOL
ENTER
TOP
1
INT
2
5
3
RDM
VOL
4
6
9
0
SEL
7
8
SETUP
GOTO
+10
FLIP DOWN AND DETACHABLE PANEL
3.6 INCH WIDE TFT COLOR LCD SCREEN
CAR DVD/VCD/CD/MP3 PLAYER
AM/FM-RDS DIGITAL PLL TUNING RADIO
MPEG4 PLAYER
USB CONNECT
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INFORMATION
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. Patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners.
CAUTION:
This DVD Player Is A Class I Laser Pro-
duct. However This DVD Player Uses
A Visible/invisible Laser Beam Which
Could Cause . Hazardous Radiation
Exposure If Directed.
Use of this copyright protection
technology must be authorized by Macro
vision Corporation, and is intended for
home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation.
Be Sure To Operate The Dvd Player
Correctly As Instructed.
Use Of Controls Or Adjustments Or
Performance Of Procedures Other Than
Those Specified Herein May Result In
Hazardous Radiation Exposure. do Not
Open Covers And Do Not Repair Your-
self. Refer Servicing To Qualified
Personnel.
Reverse engineering or disassembly is
prohibited.
REGION MANAGEMENT
INFORMATION:
This DVD Player is designed and manu-
factured to respond to the Region
Management Information that is record-
ed on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
DVD Player, this DVD Player cannot
play this disc.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC NOTES
Disc formats supported by this
player
(although not enough to make it unus-
able) depending on your handling it and
conditions in the usage environment.
Note these scratches are not an indica-
tion of any problem with the player.
Audio and Video
Disc size 12 cm
DVD
VCD
Audio and Video
Disc size 12 cm
Label side
up
Audio
Disc size 12 cm
CD
Do not touch
the
underside
of the disc
Audio
Disc size 12 cm
MP3
MP3
CD-RW
Discs which cannot be played
Do not
bend
with this player
DVD-ROM
DVD-RAM
CDV
CD-G
Wipe the disc from
center
toward the outside
edge
Handling and Cleaning
Dirt, dust, scratches and warping disc
will cause misoperation.
Do not place stickers or make
scratches on discs.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on
its inside and outside edges.If a disc
with rough edges is used, the proper
setting will not be performed and the
player will not play the disc.Therefore,
remove the rough edges in advance
by using a ball point pen or pencil as
shown on the right.To remove the
rough edges, press the side of the pen
or pencil against the inside and outside
edges of the disc.
Do not warp discs.
A disc should always be kept in its
case when not in use to prevent from
damaging.
Do not place discs in the following
places:
1.Direct sunlight
2.Dirty, dusty and damp areas
3.Near car heaters
4.On the seats or dashboard
Rough spots
on
outside edge
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl
(rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional
record cleaners as they may mar the
surface of the disc.
Ball point pen
or pencil
Rough spots
on inside
edge
Note:
A disc may become somewhat scratched
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
NOTES:
If installation angle exceeds 30 from
horizontal, the unit might not give its
optimum performance.
Choose the mounting location where the
unit will not interfere with the normal
driving function of the driver.
30
Before finally installing the unit, connect
the wiring temporarily and make sure it
is all connected up properly and the unit
and the system work properly.
Use only the parts included with the unit
to ensure proper installation. The use of
unauthorized parts can cause
Avoid installing the unit where it would
be subject to high temperature, such
as from direct sunlight, or from hot air,
from the heater, or where it would be
subject to dust, dirt or excessive
vibration.
malfunctions.
Consult with your nearest dealer if insta-
llation requires the drilling of holes or
other modifications of the vehicle.
DIN FRONT/REAR-MOUNT
This unit can be properly installed either
from "Front"(conventional DIN Front-
mount) or "Rear"(DIN Rear-mount
installation, utilizing threaded screw
holes at the sides of the unit chassis).
For details, refer to the following
illustrated installation methods.
Install the unit where it does not get in
the driver's way and cannot injure the
passenger if there is a sudden stop,
like an emergency stop.
DASH BOARD
HEX NUT
METAL MOUNTING
STRAP
SPRING WASHER
PLAIN WASHER
TAPPING SCREW
CONSOLE
SLIDE BRACKET
HOUSING
HEX BOLT
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
KEY PLATE
PLASTIC COVER
KEY PLATE
If you want to take CHASSIS out of the SLIDE BRACKET HOUSING , first remove
the PLASTIC COVER of the both sides away, then insert the two KEY PLATE into
left and right side of chassis as above illustration.
DETACHING THE FRONT PANEL
2. Slide the guide knob to remove the right
side first, slide it to the left, and pull it off
towards you .
1. Press the OPEN button to flip down the
front panel .
GUIDE Knob
OPEN button
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
2. Push the right side of the front panel
until it locks firmly into the main unit, at
one time, insert the right side of the
front panel into the main unit .
3. put it in the protective case for safe
keeping.
PROTECTIVE CASE
FRONT PANEL
3. Push it back to the position for playing
REPLACING THE FRONT PANEL
1. First, insert the left side of the front
panel into the main unit.
Bulge
Bulge
Hollow
Hollow
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRIC CONNECTION
WIRING CONNECTION
RCA cable/output
rear (optional)
RCA cable
RCH RED
FRONT RCA RED R
VIDEO OUT 1 YELLOW
FRONT RCA WHITE L
LCH WHITE
GREY SUBWOOFER
VIDEO OUT 2 YELLOW
COAXIAL OUT BROWN
RCA cable/output
front
Radio antenna jack
RED
IGNITION SWITCH(B+)
YELLOW
BLACK
CHOKE
BOX
MEMORY BACK-UP(B+)
GROUND(B-)
(B+)12V
REAR CAMERA SWITCH
BROWN
ORANGE
YELLOW
(B-)PARKING BRAKE
FUSE
REAR CAMERA INPUT
BLUE
AUTO ANTENNA
GREY
WHITE
FRONT
FRONT
Rch SPK.
Lch SPK.
WHITE/BLACK
GREY/BLACK
VIOLET
GREEN
REAR
REAR
Rch SPK.
Lch SPK.
GREEN/BLACK
VIOLET/BLACK
Note:
the earth connection cable (parking brake B-) must be connected in order for DVD
pictures to be played back to the monitor. If the cable has not been correctly
connected, the message “PARKING BRAKE” appears on the monitor.
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
DVD/RECEIVER CONTROL
15
16
5
PLAY/PAUSE
POWER
REPEAT
MUTE
STOP
3
17
19
MO/ST
ANGLE
ZOOM
7
2
20
21
MENU
LO/DX
MODE
EQ
CLK
1
13
6
OSD
BAND
TITLE/PBC
A/PS
VOL
23
ENTER
14
18
9
22
TOP
1
12
26
INT
2
5
3
VOL
RDM
4
11
4
6
9
0
24
25
SEL
7
8
10
8
SETUP
GOTO
+10
1. CLK Press it briefly to show / hide the
clock, press longer to set the time.
6. LO/DX(
)
Changing of the
SUBTITLE language on multi-subtitle
language DVD disc. In radio mode,
Press this button for distance reception
when you are located at weak signal
location, depress it for stronger signal.
2. MODE Press it to change between
RADIO ,DISC and AUX IN mode.
3. STOP Press it to stop playback, press
PLAY/PAUSE to resume playback .
7. REPEAT/
of DVD/VCD/CD/MP3 disc.
Switch the Repeat mode
4. SETUP Press it to open the SETUP
menu.
8.GOTO Press this button to begin
playback at a moment in the program you
designate. Use the number buttons to
enter the data that is needed.
5.MO/ST(
) In radio mode, press it
to select STEREO or MONO mode (In disc
mode, press it to changing of the AUDIO
soundtrack on multiaudio soundtrack
DVD disc. Changing of the sound mode of
the VCD/CD disc.)
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
9.
track & press
(Note: In DVD mode, press continually
the twice to skip back one track.)
/
Press
to skip to the next
to skip back one track.
20. ANGLE Changing of the view angle
on multi-angle DVD disc.
21. EQ Press it to turn to equalization
function.
10. SEL Press this button repeatedly to
cycle through the various audio and video
adjustments you can make: Such as
Volume, Bass, Treble, Balance, Fader,
Color, BG Color, Brightness, etc .
22.
rapidly &
/
Press to start forward
to reverse rapidly.
23. ENTER Confirm the Track/Chapter
selected with the number key or selected
with the cursor buttons on TV screen.
11. VOL+/VOL- Press it to adjust volume
level .
12.
/
/
/
Use these buttons to
24. RADIO PRESET Six preset memory
buttons.
navigate the various menus present in the
product.
25. 0 - 9 Numeric buttons. In radio mode,
0 and 9 act as TA/AF.
13. MENU/SUBWOOFER( ) Press it to
display the root menu of the DVD disc.
Press it longer to switch the Subwoofer
ON and OFF.
26. +10 Tens digit select button,
cooperatively used with numeric buttons.
14. BAND(OSD) In Radio mode, press
this button repeatedly to switch between
the five radio bands .
In Disc Playback modes, Press this
button to see information about the disc
currently in play.
15. POWER ( ) Press it to turn on the
unit , press it again to turn off.
16. PLAY/PAUSE(
) In DISC mode,
starting playback, stopping picture/track.
In Radio mode, PTY selection of the
program type.
17. MUTE Press this button to turn off the
audio. Press again to restore the sound
to its prior volume level.
18. TITLE/PBC (A/P) Display the TITLE
menu that is stored in DVD disc changing
between PBC ON and PBC OFF on the
VCD disc.(Auto store and preset scan
function in radio stations .)
19. ZOOM Allows the picture to be
increase in size .
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
USING THE REMOTE CONTROL
PREPARING THE REMOTE
CONTROL
1. Face the remote control towards the
player front face IR mark (remote control
signal receiver).
Inserting the Batteries
1. First push to inside as the direction
indicated by the arrow (See
1
)and then
2. Operation angle: About 30 degree
in each the direction of the front of the
IR mark.
Remove the battery holder as the
2
direction indicated by the arrow (See
).
2. Replace the battery Set a new battery
property with (+)side up as illustrated
3
(See
).
3. Insert the battery holder. Push in the
holder to the original position(See ).
4
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
1
3
4
12
19
9
6
14
CAR DVD/VCD/CD/MP3 PLAYER WITH MPEG4
SEL
CLK
TA/AF
OPEN
COMPACT
E
O
N
10
18
DIGITAL VIDEO
VOL-
BND
5
CH 1-6
IR
APS
MOD
VOL+
COMPACT
DISP
13
DIGITAL AUDIO
MU/PTY
17
AUX IN
8
11
16
2
7
15
4. SELECT Knob
1. OPEN Button
To access the available adjustment
settings for audio and video, press this
knob repeatedly to cycle through and
select them :
Press it to flip down the front panel , then
you can insert the CD disc into the CD
compartment. You can also press the
Eject button(14) to eject the disc.
Volume - Bass - Treble - Balance -
- Fader - Tint - Contrast - Bright - Color -
BG Color .
2. (POWER On/Off) BUTTON
Press this button to switch the device
On, WELCOME appears in the display.
Press it again to switch the device Off,
SEE YOU appears in the display.
The settings of the individual menu items
are changed by turning the multifunction
button VOL (3)
5. BAND Button
3. VOL Multifunction Button
In normal mode, this knob is used to
increase or decrease the volume.
If the SEL knob is pressed beforehand,
changed can be made in the menus,
e.g. Sound mode .
In Radio mode, press this button repeat-
edly to cycle through and select the
desired radio band, the designation of
the corresponding level- FM1, FM2, FM3,
AM1(MW1), AM2(MW2)- is shown in the
TFT.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
7.APS/DISP Button
Automatic Memory Function:
6.TA/AF BUTTON
TA Function [traffic Announcement]
Button(for Rds Only)
In RADIO mode
When you press the TA/AF button, the
TA function is activated, the TA symbol
appears in the display .
In Radio mode, press and hold the
APS/DISP button for about 2 seconds to
active automatic station storage. The
radio searches within the current frequ-
ency band, e.g. FM1, for the strongest
station are then allocated to the corres-
ponding storage locations. Then the sta-
tion of the first storage location is set. If
you would like to search for more stations
in the FM band, press the BND button(5)
in order to change to the FM2 or FM3
band. Press it longer again for about 2
seconds to continue search.
( press it again to turn off . )
During radio operation in one FM frequ-
ency band the search for a traffic annou-
ncement station is started automatically
(TA SEEK) . If an FM station is being
received which transmits the latest traffic
announcements from time to time, the TP
display lights up.
If an FM station is being received which
transmits the latest traffic announceme-
nts automatically interrupt CD operation
(the word TRAFFIC appears in the dis-
play).
The volume level is increased to the
minimum value for the transmission of
traffic announcements. After the traffic
announcements has finished, the prog-
rame that was previously running is
resumed.
Program Scan Function:
In Radio mode, press it briefly to scan
and play all the preset sations in order,
and it will hold at each band for about 5
seconds . If you like one of them, press
the PLAY/PAUSE button to stop the
scanning .
Display ON/OFF Function:
In Disc mode, press the APS/DISP
button briefly to turn off the display
image (the monitor on the unit only) , the
sound will stay on. (Press it again to
resume the playback picture mode.)
You can press SEL knob briefly to select
the “BG COLOR” by repeatedly pressing
the SEL knob, then rotate the VOL+/- to
select the background color among of
the “AUTO, BG COLOR: 01........
BG COLOR: 11”, in “ AUTO” mode, the
monitor of unit will change the
AF [Alternative Frequencies]
When press and hold the TA/AF button
more than 2 seconds, it is activated as
AF mode ON or OFF .
Segment off: AF switching mode off.
Segment on: AF switching mode on, the
radio continuously tests the signal stren-
gth of the AF frequency. Whenever the
new AF frequency is stronger than the
station that is currently tuned in, the
radio switches to this frequency for a
short time and the message “NEW
FREQUENCY” is displayed for one to
two seconds.
background color automatically.
Segment flashing: AF switching mode is
selected, but RDS information is not
received yet.
When press the SEL button for a longer
time to access the selection menu:
REG ON/ REG OFF, PI MUTE/PI SOUND,
AF OFF/ AF ON.
8.MUTE/PTY Button
Press this button to turn off the audio.
Press again to restore the volume to the
prior level. You can also disable the
MUTE function by turning the VOL +/-
knob.
In Radio Mode, press this button and
hold for a bout 2 seconds to select the
PYT of the grogram type (examples of
such types of program are : NEWS,
POP.....)
Regional mode ON
PI CODE is checked when AF CHECK in
progress
Regional mode OFF
PI CODE and COVERAGE AREA is not
checked when AF check in progress.
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
9.CLK Button
DVD/VCD/CD/MP3:
Press it to change the display to clock
display. Press it again to return to
previous display. In clock display, press
and hold for about 2 seconds until the
hour display flashes, rotate VOL+/-
button to adjust hours . Press it again,
the minute display flashes , rotate
VOL+/- button to adjust minutes.
Normal Playback 2x
4x
8x
16x
b) In Radio Mode:
Press briefly the
ally tune the radio in single steps. Press
and hold for two seconds to start the
search for a radio station automatically.
or button to manu-
10.
a). In Disc Playback Mode
Press this button to pause playback,
press it again to resume playback.
B). In Radio Mode
Press this button repeatedly to preset
station. With this system a total of 30
stations can be stored in the memory .
Each band store up to six preset stations.
The stations might be FM1, FM2, FM3,
AM1 (MW1) and AM2 (Mw2) band.
The operation as below:
/CH 1-6 (RADIO PRESET)
13. MOD BUTTON
Press it repeatedly to select AUX IN ,
RADIO and DISC mode. During the USB
playback, you can press STOP button
and then press GOTO button to select
the DISC mode.
14. (EJECT) Button
In DISC playing ,Press the Open button
(1) to flip down the front panel, then you
can press the this button to eject the disc .
- store in memory
15. RESET Button
press and hold the desired memory
location for several seconds, the current
listening station will be stored into the
number location.
RESET button is placed on the housing
and must be activated with either a
ballpoint pen or thin metal object. The
RESET button is to be activated for the
following reasons:
A. Initial installation of the unit when all
wiring is completed.
B. All the function buttons do not operate.
C. Error symbol on the display.
- retrieve a preset station
press it button repeatedly to retrieve
a station which had been stored in the
memory in advance the chosen
number is shown on display.
11/12 .
(tune, Seek, Track, Skip Up/down)
/
Buttons
16. IR sensor
17. AUX INPUT JACK
For information about using an AUX IN
audio source, please see page 15.
a) In DISC, USB mode:
if you wish to jump forwards or back-
wards press briefly the
(Note: during the DVD playback , press
the button continually twice to skip
back one track during playback.)
Press and hold up for more than two
seconds to begin Fast Forward (or down
for Fast Reverse) mode. Press the
button again as needed, to cycle thru the
range of available speeds.
or
button .
18. USB PORT
For information about connecting a
USB device, please see page 17.
19. TFT Display
(liquid crystal display)
The operation of the TFT, please see
page 16.
-13-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
In VCD playback mode, press and hold
this button to display the following menu:
ADDITIONAL FUNCTIONS ONLY
PRESENT ON REMOTE CONTROL
SELECT DIGEST TYPE:
TRACK DIGEST
DISC INTERVAL
1/TOP BUTTON
In VCD, CD or MP3 playback mode,
pressing this button will select and
play the first track or chapter on the
disc. (Please note: this button does
not have this function in DVD mode .)
TRACK INTERVAL
Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select an item ,
and press ENTER to confirm .
REPEAT BUTTON
In DVD playback mode, press and hold
this button to display the following menu:
Pressing the repeat button repeatedly
allows you to cycle through and select
one of the REPEAT modes available
as follows :
SELECT DIGEST TYPE:
TITLE DIGEST
CHAPTER DIGEST
TITLE INTERVAL
CHAPTER INTERVAL
DVD:
CHAPTER REPEAT ON
TITLE REPEAT ON
REPEAT ALL
Use the UP, DOWN, LEFT and RIGHT
arrows on the remote to select an item ,
and press ENTER to confirm .
VCD/CD/MP3:
REP-ONE
REP-ALL
4/RANDOM BUTTON
1). Continuously repeat at the current
chapter/track, when selected
REP-ONE mode.
2). Select REP-ALL mode to continuo-
usly repeat all chapter/track on the
current disc.
In Disc playback mode, press this
button to begin playback of all the
tracks on the disc in RANDOM order .
To return to normal playback mode,
press it again .
3). REPEAT feature does not support
VCD2.0 (with PBC ON).
3/INT BUTTON
In CD playback mode, press this button
to start the intro Scan Function .
The player will play the first six seco-
nds of a track and then skip to the next
and do the same, and so on .
If you hear a song you wish to continue
listening to, press the button again .
(Please note : this button does not
have this function in MP3 playback
mode.)
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
MP3/WMA/JPEG/MPEG4 PLAYBACK
Fast Forward/ Fast Reverse Playback
In playback mode, press and hold (for
When you insert a disc which contains
MP3, WMA or JPEG files, the different
file types are detected, and a list of the
files are produced, as shown in the
diagram below :
More than two seconds) the
on front panel to move to FAST
FORWARD or FAST REVERSE play .
You can also briefly press the or
/
button
button on remote control to accomplish
this .
4
6
5
Repeat one
00:56
04:07
3
2
AUX OPERATION
003/112
On the front panel of the unit, there is an
AUX IN jack, Following the diagram
below to connect analogue replay
devices. Use this jack to replay sound
of other replay equipment such as
DVD players, computers, etc. Via the
loudspeakers.
Mp3
K
P
Mp3
Mp3
1
1
woman
ton
..........n..e.w.
1). Please connect the external device
with stereo jack plug the Aux in socket .
1 .Current track(file)(highlighted bar)
.Current track (file) number/total
number of tracks(files) in the current
folder.
2
.Elapsed playing time of the current
track(not available for JPEG disc)
.total playing time.( not available for
JPEG disc)
3
4
AAUUXX IINN
.Selected playback mode
.Operation mode icon.
5
6
(Play),
2). Press the MOD button to select the
AUX IN connection .
(stop), (pause), (forward)
(reverse).
3). Use the VOL+/- button you can
change the volume level .
Use
/
/
/
on the remote control to
select the item or folder, and press the
ENTER button to confirm , then select
the desired the track to play .
SCROLL CAPTION ADJUSTMENT
In Radio mode:
You can adjust the desired scroll caption,
the method of the operation as follow:
a). Press and hold the SETUP button
(for about 2 seconds) on the remote
control, the adjustment scroll bar will
display on the screen .
Pressing REPEAT button repeatedly
can select repeat play mode.
REP-ONE:
Play the same song over and over again.
REP ALL:
Play all songs on the disc, then repeats
the entire disc over and over again .
b). Use the VOL+/- to select among of
the “A, B, C ....X, Y, Z, and blank ”, and
use the
/
button on front panel to
SKIP AHEAD / BACK
In playback mode, press the
buttons on remote to skip ahead or back
one item in the list .
ahead/back (proceed/cancel), and then
press the setup button briefly to confirm .
(Press it longer again to renew . )
or
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
NOTE(For The Brake Function)
VIDEO QUALITY ADJUSTMENT
if the parking brake is not engaged,
“parking brake” flashes on the monitor,
and no playback picture will be shown.
Only the audio will be heard.
-This warning appears only when the
parking brake wire is connected to the
parking brake system built in the car.
In any video display mode, briefly press
SEL knob repeatedly to cycle through
and select the various audio and video
parameters you may wish to adjust :
(such as volume, bass, treble, balance,
fader, color, bright, contrast, tint ,
BG color and Bluetooth . Then rotate the
VOL + / - to adjust the selected mode.
(The corresponding value will show on
the display.)
ALTERNATE AUDIO/VIDEO SOURCE
Volume
Bass
Treble
Balance
Fader
On the front panel of the unit , there is an
AUX IN jack, to connect analogue replay
devices. Use this jack to replay sound of
other replay equipment such as
DVD players, computers, etc.
Tint
Contrast
Bright
Color
Via the loudspeakers.
The video adjustments are made using a
scale of 0-32 .
1). Please following the diagram below,
connect the external device with stereo
jack plug the AUX IN socket .
2). Press the MOD button to select the
AUX IN connection.
Adjustable Items:
COLOR: 0 to 32
Adjust the color fo the picture-lighter or
darker.
BRIGHT: 0 to 32
3). Use the buttons on the external
device to operate it .
Adjust if the picture is too bright or too
dark.
CONTRAST: 0 to 32
Adjust the contrast of the bright and dark
portion.
TINT: 0 to 32
Adjust the tint if the human skin color is
unnatural.
AUX IN
-Adjustable when “NTSC “ is selected for
“NTSC/PAL “ .
Headphones
port
Rear View Camera
When connecting the rear view camera.
the mirror image of the rear view through
the rear view camera is automatically
displayed on the monitor when you
change the gear to the back position.
(The monitor on the unit only.)
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
USB OPERATION
Following the diagram below, connect
your USB device to the front panel
USB port . If it is properly connected,
the device will be mounted and start
playing automatically.
On-Screen Display Function
Press the OSD button during playback
to display information about the current
disc . Pressing repeatedly will show you
different data, as shown below . In this
example, we are looking at the contents
of a DVD disc .
A.Example for DVD:
a.Press OSD for the first time:
USB port
TITLE ELAPSED
TT 01/01 CH 01/38
0:02:06
In USB Playback mode
b.Press OSD for the second time:
Use the UP, DOWN, RIGHT or LEFT
buttons to navigate to and select files
to play, and press ENTER to begin
playback (or viewing, in the case of
JPEG files). To skip to the next or
TITLE REMAIN
TT 01/01 CH 01/38 3:24:36
c.Press OSD for the third time:
last track, press the
Press the or buttons for Fast
or
buttons.
CHAPTER ELAPSED
TT 01/01 CH 01/38 0:02:56
Forward or Fast Reverse playback.
REPEAT play modes are also available
by repeatedly pushing REPEAT until
the desired mode is found.
d.Press OSD for the fourth time:
CHAPTER REMAIN
TT 01/01 CH 01/38 0:04:32
Changing From USB to DISC Playback
Modes
If you are in USB Playback mode and
wish to begin playback of a disc already
in the player, press the STOP button
once. Then press the GOTO button
and the player will switch to DVD/VCD/
CD/MP3 Playback mode.
e.Press OSD for the fifth time:
The message on the screen will be
cleared.
B.Example for VCD/SVCD/CD:
a.Press OSD for the first time:
Changing From DISC to USB Playback
Modes
SINGLE ELAPSED
If the disc present in the player is an
MP3 disc, press the STOP button once
and press the GOTO button to USB
playback. If the disc present in the
player is an DVD or VCD or CD disc,
press the STOP button twice and press
the GOTO button to USB playback.
TRACK 01/16
00:49
b.Press OSD for the second time:
SINGLE REMAIN
TRACK 01/16
02:45
c.Press OSD for the third time:
TOTAL ELAPSED
IMPORTANT NOTE:
TRACK 01/16
00:60
to prevent damage to the USB device,
do not remove or disconnect it during
playback. it is also a good practice to
remove the USB drive during disc
playback.
d.Press OSD for the fourth time:
TOTAL REMAIN
TRACK 01/16
78:46
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Notes:
- The language number is different
according to the disc.
- Some discs only contain one subtitle
language.
- When no different subtitle language
e.Press OSD for the fifth time:
The message on the screen will be
cleared for SVCD and VCD.
C.Example for MP3:
Each time OSD is pressed, the message
displayed on screen changes as follows:
are recorded, will be displayed
at screen left top corner.
SINGLE ELAPSED
SINGLE REMAIN
Multi-angle Function
(for DVD Only)
Multi-audio Language Function
For DVD:
Press ANGLE during playback. Each
time the button is pressed, number of
the angle changes in sequential order.
Notes:
- The angle number is different
according to the disc.
- The function only work for disc having
scenes recorded at different angles.
- When no different angle are recorded,
will be displayed at screen left top
corner.
Press AUDIO during playback.
Each time the button is pressed,
number of the audio soundtrack
language changes on sequential order.
NOTES:
- The language number is different
according to the disc.
- Some disc only contain one language
soundtrack
- When no different language
soundtrack are recorded
will be
display at screen left top corner.
For VCD/CD:
Press AUDIO during playback. It is
possible to switch the sound between
monaural and stereo sound.
MONO LEFT
MONO RIGHT
MIX-MONO
STEREO
Title Menu Function
For DVD:
If the DVD has multiple titles recorded
on the disc. It can select preferred title
from the title menu to start playback.
- Press TITLE during playback.The title
menu is display.
- Press the cursor button shown in TV
screen, select preferred title by the
cursor button and confirmed by
ENTER key.
For VCD:
Press TITLE/PBC button on the remote
control while the disc is playing, you can
switch between "PBC on"and "PBC off"
mode.
Multi-subtitle Language Function
(for DVD Only)
Press SUBTITLE during playback.
Each time the button is pressed, number of
the subtitle language changes in
sequential order.
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
ABOUT SETUP MENUS
--- GENERAL PAGE ---
DOLBY
DOLBY
-----General setup page----
-----General setup page----
TV Display
Normal/PS
Normal/LB
Wide
TV Display
LB
ON
Angle Mark
OSD Lang
Spdif Output
Captions
Angle Mark
OSD Lang
Spdif Output
Captions
ENG
SPDIF/RAW
ON
Screen Saver
Last Memory
Screen Saver
Last Memory
ON
ON
Set TV Display Mode
Go To General Setup Page
TV Screen
Video
Material
Press SETUP button on the remote
control to display the SETUP menu ,
Select the preferred item by using the
Wide(16:9)
Pan Scan
Normal
Letter-box
4:3
/
/
/
buttons, and press the
ENTER button to confirm.
When you press SETUP on the remote
control, the SETUP screen will be
displayed. At the top of the screen are
four icons, representing:
1.TV DISPLAY SETUP
This is to select the appropriate TV
aspect (4:3 or 16:9) according to the
connected TV set.
Overview Of The Main Menu
Normal/PS (For 4:3 TV)
Played back in the PAN & SCAN style.
(If connected to wide-screen TV, the
left and right edges are cut off.)
Normal/LB (For 4:3 TV)
DOLBY
(1)
(2)
(3)
(4)
(1). GENERAL SETUP
(2). SPEAKER SETUP
(3). DOLBY DIGITAL SETUP
(4). PREFERENCES SETUP
Use the LEFT or RIGHT arrow button
to select the desired setup menu and
press ENTER to confirm.
In the following description, we begin
with the GENERAL SETUP menu.
Played back in letterbox style.
(If connected to wide-screen TV, black
bands appear at top and bottom of the
screen.)
Wide (For 16:9 TV)
Select when a wide-screen TV set is
connected.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
DOLBY
DOLBY
-----General setup page----
TV Display
-----General setup page----
TV Display
ON
Angle Mark
OSD Lang
Spdif Output
Captions
Angle Mark
Osd Lang
OFF
SPDIF OFF
SPDIF/RAW
SPDIF/PCM
Spdif Output
Captions
Screen Saver
Last Memory
Set Angle Mark
Screen Saver
Last Memory
Setup SPDIF
2.ANGLE MARK DISPLAY SETUP
If it is set to ON, when the multi-angle
4.SPDIF OUTPUT
This is to activate the audio output
from SPDIF OFF mode to SPDIF/RAW
mode to SPDIF/PCM mode.
DVD disc is playing,
(the angle
mark) will appears on the screen; if is
set to OFF, the mark will not appear.
DOLBY
DOLBY
-----General setup page----
TV Display
-----General setup page----
TV Display
English
French
Angle Mark
OSD Lang
Spdif Output
Captions
Angle Mark
OSD Lang
German
Spanish
Italian
ON
Spdif Output
OFF
Captions
Screen Saver
Last Memory
Screen Saver
Last Memory
Closed Caption
Portuguese
Set OSD Language
5.CAPTIONS SETUP
3.OSD LANG TYPE SETUP
Select the preferred OSD language
Activate the CAPTIONS feature by
selecting ON. And release this feat-
ure by selecting OFF.
by using the
/
buttons.
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
SPEAKER SETUP
--- SPEAKER SETUP PAGE ---
DOLBY
DOLBY
-----General setup page----
TV Display
-----Speaker Setup Page----
Angle Mark
OSDLang
Spdif Output
Captions
DOWNMIX
LT/RT
STEREO
ON
Screen Saver
Last Memory
Screen Saver
OFF
Set Downmix Mode
This is to activate the audio output from
DOLBYAC3 5.1 DOWNMIX to 2 channel
mode. Select the preferred SPEAKER
connection by using the cursor buttons.
Select the LT/RT to activate the Dolby
surround compatible output.
6.SCR SAVER SETUP
Select the SCR SAVER output
ON/OFF.
Select the STEREO to activate simple
stereo mode.
DOLBY
DOLBY DIGITAL SETUP
DOLBY
-----General setup page----
TV Display
-----Dolby Digital Setup----
Angle Mark
OSD Lang
Spdif Output
Captions
FULL
6/8
DYNAMIC
4/8
2/8
ON
Screen Saver
OFF
OFF
Last Memory
Set Last Memory State
Set DRC OFF
DYNAMIC RANGE CONTROL
Select DRC and adjust the dynamic
range of a Doby Digital encoded
7.LAST MEMORY SETUP
Select the LAST MEMORY output
ON/OFF.
program. There are 8 steps between
full compression and off compression.
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
PREFERENCES SETUP
--- PREFERENCES PAGE ---
DOLBY
DOLBY
-----Preference Page----
-----Preference Page----
TV Type
PAL
TV Type
English
French
Spanish
German
AUTO
NTSC
Audio
Audio
Subtitle
Disc Menu
Parental
Password
Default
Subtitle
Disc Menu
Parental
Password
Default
Italian
Portuguese
OFF
Set TV standard
Preferred Subtitle Language
1.TV TYPE SETUP
3.SUBTITLE LANGUAGE SETUP
Select the preferred SUBTITLE
language by using the cursor buttons.
This player can play discs recorded
in either PAL or NTSC format.Select
NTSC format, when you connected to
NTSC TV.Select PAL format, when
you connected to PAL TV.Select AUTO
format, the player TV output format
will according to the DVD disc format..
DOLBY
DOLBY
-----Preference Page----
TV Type
-----Preference Page----
TV Type
Audio
English
English
Audio
French
Subtitle
French
Disc Menu
Parental
Password
Default
Spanish
German
Italian
Subtitle
Spanish
Disc Menu
German
Parental
Italian
Portuguese
Password
Portuguese
Default
Preferred Menu Language
Preferred Audio Language
4.DISC MENU LANGUAGE SETUP
Select the preferred DISC MENU
language by using the cursor
buttons.
2.AUDIO LANGUAGE SETUP
Select the preferred AUDIO sound-
track by using the cursor buttons.
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP
DOLBY
DOLBY
-----Preference Page----
-----Preference Page----
TV Type
1KID SAF
2G
TV Type
Audio
Audio
3PG
Subtitle
Disc Menu
Parental
Password
Default
Subtitle
4PG13
5PGR
6R
Disc Menu
Parental
Password
Default
7NC 17
8 ADULT
OFF
RESET
Load Fcatory Setting
Set Parental Control
7.DEFAULTS
Select reset to become factory initial
setting.
5.PARENTAL
Select suitable parental guidance by
the cursor buttons and conformed by
pressing ENTER button.
DEFAULTS TABLE
DOLBY
TV DISPLAY
NORMAL/LB
ON
-----Preference Page----
TV Type
ANGLE MARK
OSD LANGUAGE
ENGLISH
SPDIF/RAM
ON
GENERAL SETUP
Audio
SPDIF OUPUT
CAPTIONS
Subtitle
Disc Menu
Parental
SCR SAVER
ON
LAST MEMORY
ON
DOWNMIX
SPEAKER SETUP
DOLBY DIGITAL
STEREO
OFF
Password
Default
CHANGE
DYNAMIC
TV TYPE
AUDIO
AUTO
ENGLISH
OFF
Change Password
SUBTITLE
6.PASSWORD
DISC MENU
Select the change and press ENTER
button. Type the old password (The
initial factory code is 1379) and key
in 4 characters password now you
want to use, and retype again to
confirm key in correctly.
PREFERENCES
ENGLISH
8 ADULT
1379
PARENTAL
PASSWORD
-23-
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATION
Supply Voltage:
Current Consumption:
Signal System:
12V DC (11V-15V)
Less than10 A
Compositive video 1.0Vp-p 75
(1)DVD-VIDEO Disc
Discs Played:
5"(12 cm) single-sided, single-layer
5"(12 cm) single-sided, double-layer
(2)Compact Disc (CD-DA, VIDEO CD)
5"(12cm) disc
Audio Signal Output:
Characteristics:
2ch&4ch line out
(1)Frequency Response
(2)S/N Ratio
20 Hz - 20 KHz
90 dB (JIS)
(3)Wow and Flutter
Below measurable limits
For 3 Bands
(Europe)
FM
For 2 Bands
For 2 Bands
(U.S.A.)
FM
(Europe)
FM
Frequency Coverage:
IF:
87.5 to108 MHz 87.5 to108 MHz 87.5 to107.9 MHz
10.7 MHz
10.7 MHz
15 dBu
MW
10.7 MHz
15dBu
AM
Sensitivity (S/N = 30 dB): 15 dBu
MW
Frequency Coverage:
IF:
522 to1620 KHz 522 to1620 KHz 530 to1710 KHz
450 KHz
450 KHz
40 dBu
450 KHz
40 dBu
Sensitivity (S/N = 20 dB): 40 dBu
LW(Optional)
Frequency Coverage:
IF:
144 to290 KHz
450 KHz
Sensitivity (S/N = 20 dB): 45 dBu
Monitor Screen Size:
Number of Pixels:
Color System:
3.6 Inch Wide
320 X RGB X 240 pixels
NTSC/PAL
NOTE: Specifications and design are subject to modification, without notice,
due to improvements in technology.
-24-
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
Before going through the check list, check wiring connection. If any of the problems
persist after check list has been made, consult your nearest service dealer.
SYMPTOM
CAUSE
SOLUTION
If the power supply is properly
connected to the car accessory
terminal,switch the ignition key
to "ACC"
The car ignition switch is
not on
No power
The fuse is blown
Replace the fuse
Presence of disc inside the Remove the disc in the player,
player.
then put a new one
Inserting the disc in reverse Insert the compact disc with
direction
Disc can not be
loaded or ejected
the label facing upward
Clean the disc or try to play a
new one
The disc is extremely dirty
or defective
Temperature inside the car
is too high
Cool off or until the ambient
temperature return to normal
The color system is
set incorrectly
Television/video
imageappears
black-white
Please switch to correct color
system from menu
Make proper connection
The unit is not connected
to the parking brake
detection switch
No television/video
image appears
according to“wire connection”
For safety reasons no television
/video images are displayed while
the vehicle is moving.
The parking brake is not
engaged
Engaging the parking brake will
cause images to be displayed.
Please the television mode of
the choice accommodation
The disc format is not
accordingto the TV-set
used (PAL/NTSC)
No color in picture
No JPEG files are recorded
on the disc.
JPEG disc can
not be played
back
Change the disc
Change the disc
Record JPEG files using a
compliant application
JPEG files are not recorded
in a compliant formant
The built-in microcomputer Press the RESET button.
is not operating properly
due to noise
The operation keys
do not work
Front panel is not properly fixed
into its place
The antenna cable is not
connected
The radio does not
work
Insert the antenna cable firmly
The signals are too weak
Select a station manually
888-J3501-03S
-25-
Download from Www.Somanuals.com. All Manuals Search And Download.
|