Land Pride Spreader SPS20 User Manual
Pulverizer Seeders  
SPS20 & SPS30 Series  
313-242M  
Operator’s Manual  
Read the Operator’s Manual entirely. When  
you see this symbol, the subsequent  
instructions and warnings are serious - follow  
without exception. Your life and the lives of  
others depend on it!  
!
6/26/2002  
© Copyright 2002 Printed  
Cover photo may show optional equipment not supplied  
with standard unit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
▲
Land Pride  
Important Safety Information  
Important Safety Information  
These are common practices that may or may not be applicable to the products described in  
this manual.  
WARNING  
!
Keep Riders  
Off Machinery  
▲ Riders obstruct the operator’s  
view. They can be struck by  
foreign objects or thrown from the  
machine.  
Be Aware of Signal Words  
A signal word designates a degree or  
level of hazard seriousness. The  
signal words are:  
Indicates a potentially hazardous  
situation which, if not avoided, could  
result in death or serious injury, and  
includes hazards that are exposed  
when guards are removed. It may  
also be used to alert against unsafe  
practices.  
!
DANGER  
▲ Never allow children to operate  
Indicates an imminently hazardous  
situation which, if not avoided, will  
result in death or serious injury. This  
signal word is limited to the most  
extreme situations, typically for  
machine components that, for  
functional purposes, cannot be  
guarded.  
equipment.  
!
CAUTION  
Indicates a potentially hazardous  
situation which, if not avoided, may  
result in minor or moderate injury. It  
may also be used to alert against  
unsafe practices.  
This is the safety alert symbol. It means:  
ATTENTION! BECOME ALERT! YOUR  
SAFETY IS INVOLVED!  
!
For Your Protection  
Shutdown and Storage  
OFF  
▲ Thoroughly read and understand  
the “Safety Label” section, read all  
instructions noted on them.  
▲ Lower machine to ground, turn off  
engine, and remove the key.  
▲ Detach and store implements in a  
area where children normally do  
not play. Secure implement by  
using blocks and supports.  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
Land Pride  
Important Safety Information  
These are common practices that may or may not be applicable to the products described in  
this manual.  
Transporting the Loader  
and Attachment  
▲ Always drive up the ramp with  
heavy end uphill. Engage parking  
brake.  
Getting On and Off Safely  
Before leaving the  
operator’s seat:  
▲ Lower lift arms and put  
attachment flat on the ground.  
While Operating  
▲ Start loader with steering levers  
and hydraulic controls in neutral.  
Keep bystanders away.  
▲ Secure loader and attachments  
using tiedowns and chains. Use  
towing vehicle and trailer of  
adequate capacity.  
▲ Stop the engine.  
▲ Engage the parking brake.  
▲ Raise seat bar and move controls  
until both lock.  
▲ Remove the key to prevent  
unauthorized starting.  
▲ Use the steps, grab-handles and  
skid-resistant surfaces when  
getting on or off the loader.  
▲ Disconnect battery ground cable  
Practice Safe Maintenance  
(-) before servicing or adjusting  
electrical systems or before  
welding on implement.  
▲ Understand procedure before  
doing work. Use proper tools and  
equipment, refer to Operator’s  
Manual for additional information.  
▲ Inspect all parts. Make sure parts  
are in good condition & installed  
properly.  
▲ Work in a clean dry area.  
▲ Allow implement to cool  
▲ Remove buildup of grease, oil or  
completely.  
debris.  
▲ Do not grease or oil implement  
▲ Remove all tools and unused  
parts from implement before  
operation.  
while it is in operation.  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
2
Land Pride  
Important Safety Information  
These are common practices that may or may not be applicable to the products described in  
this manual.  
Avoid High  
Pressure Fluids Hazard  
▲ Escaping fluid under pressure can  
penetrate the skin causing serious  
injury.  
▲ Avoid the hazard by relieving  
pressure before disconnecting  
hydraulic lines.  
▲ Use a piece of paper or  
cardboard, NOT BODY PARTS, to  
check for suspected leaks.  
▲ Wear protective gloves and safety  
glasses or goggles when working  
with hydraulic systems.  
▲ If an accident occurs, see a  
doctor immediately. Any fluid  
injected into the skin must be  
surgically removed within a few  
hours or gangrene may result.  
Wear  
Prepare for Emergencies  
▲ Be prepared if a fire starts.  
Protective Equipment  
▲ Protective clothing and equipment  
▲ Keep a first aid kit and fire  
should be worn.  
extinguisher handy.  
▲ Wear clothing and equipment  
appropriate for the job. Avoid  
loose fitting clothing.  
▲ Prolonged exposure to loud noise  
can cause hearing impairment or  
hearing loss. Wear suitable  
hearing protection such as  
earmuffs or earplugs.  
▲ Operating equipment safely  
requires the full attention of the  
operator. Avoid wearing radio  
headphones while operating  
machinery.  
▲ Keep emergency numbers for  
doctor, ambulance, hospital and  
fire department near phone.  
911  
▲ Never operate loader’s controls  
Safety at All Times  
from the ground.  
Thoroughly read and understand the  
instructions given in this manual  
before operation. Refer to the “Safety  
Label” section, read all instructions  
noted on them.  
▲ Always sit in the operator’s seat  
when activating the controls.  
▲ Keep bystanders away from  
loader and work area. Do not  
raise the lift arms and attachment  
over another worker.  
▲ Operator should be familiar with  
all functions of the unit.  
▲ Never carry riders or use loader  
▲ Do not stand between the skid  
steer loader and implement during  
hitching.  
as a personlift.  
▲ Travel up and down slopes, not  
across them.  
▲ Keep hands, feet, and clothing  
▲ Keep hands and feet on controls  
or footrests. Never lean out the  
front of the cab with the engine  
running.  
away from power-driven parts.  
▲ Wear snug fitting clothing to avoid  
entanglement with moving parts.  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Land Pride  
Important Safety Information  
the correct safety labels are included in the request. To  
Safety Labels  
order new labels go to your Land Pride dealer.  
5. Refer to this section for proper label placement.  
To install new labels:  
1. Your pulverizer seeder comes equipped with all safety labels  
in place. They were designed to help you safely operate your  
pulverizer seeder. Read and follow their directions.  
2. Keep all safety labels clean and legible.  
a. Clean the area the label is to be placed.  
b. Spray soapy water on the surface where the label is to  
be placed.  
3. Replace all damaged or missing labels. To order new labels  
go to your Land Pride dealer.  
c. Peel backing from label. Press firmly onto the surface.  
d. Squeeze out air bubbles with the edge of a credit card.  
4. Some new equipment installed during repair requires safety  
labels to be affixed to the replaced component as specified  
by Land Pride. When ordering new components make sure  
818-543C  
18493  
Danger: Guard Missing  
(Beneath Chain Guard)  
838-111C  
18493  
Danger: Keep Away  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
6/26/02  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Land Pride  
Introduction  
Introduction  
Land Pride welcomes you to the growing family of new  
product owners.  
Owner Assistance  
The Warranty Registration card should be filled out by the  
dealer at the time of purchase. This information is  
necessary to provide you with quality customer service.  
This pulverizer seeder has been designed with care and  
built by skilled workers using quality materials. Proper  
assembly, maintenance, and safe operating practices will  
help you get years of satisfactory use from this pulverizer  
seeder.  
If customer service or repair parts are required contact a  
Land Pride dealer. A dealer has trained personnel, repair  
parts and equipment needed to service the implement.  
Application  
The parts on your Pulverizer Seeder have been specially  
designed and should only be replaced with genuine Land  
Pride parts. Therefore, should your pulverizer require  
replacement parts go to your Land Pride Dealer.  
The SPS2048 and SPS3072 Pulverizer Seeders are  
designed and built by Land Pride to efficiently do the tasks  
of seedbed preparation and precision seeding. Both the  
48" model and the 72" models are adapted for Category I  
3-point hitch mounting. Seed metering is driven off of the  
rear mounted pulverizer roller making the metering rate  
directly proportional to forward ground speed and distance  
traveled.  
Serial Number Plate  
For prompt service always use the serial number and  
model number when ordering parts from your Land Pride  
dealer. Be sure to include your serial and model numbers in  
correspondence also. Refer to Figure 1 for the location of  
your serial number plate.  
Front mounted scarifier shanks open and loosen the soil,  
while seed cups drop the seed directly into the cultivated  
soil behind the scarifier shanks. The rear pulverizer roller  
immediately breaks up unwanted clods, levels the ground,  
and presses the seed into firm contact with the soil. When  
soil conditions are right, this can often be done in one  
highly efficient pass.  
The Land Pride SPS2048 and SPS3072 Pulverizer  
Seeders are well suited for use by professional  
landscapers and rental yards. They have applications on  
sod farms, transportation right-of-ways, golf courses, park  
systems, athletic fields, construction sites, and housing  
developments. See “Features and Benefits”,  
“Section 6” for additional information.  
Using This Manual  
• This Operator’s Manual is designed to help familiarize  
you with safety, assembly, operation, adjustments,  
troubleshooting, and maintenance. Read this manual  
and follow the recommendations to help ensure safe  
and efficient operation.  
18493  
Serial Number Plate Location  
Figure 1  
• The information contained within this manual was  
current at the time of printing. Some parts may change  
slightly to assure you of the best performance.  
Further Assistance  
Your dealer wants you to be satisfied with your new  
pulverizer. If for any reason you do not understand any  
part of this manual or are not satisfied with the service  
received, the following actions are suggested:  
• To order a new Operator’s or Parts Manual contact your  
authorized dealer. Manuals can also be downloaded,  
free-of-charge from our website at www.landpride.com  
or printed from the Land Pride Service & Support Center  
by your dealer.  
1. Discuss the matter with your dealership service  
manager making sure he is aware of any problems  
you may have and that he has had the opportunity to  
assist you.  
Terminology  
"Right" or "Left" as used in this manual is determined by  
facing the direction the machine will operate while in use  
unless otherwise stated.  
2. If you are still not satisfied, seek out the owner or  
general manager of the dealership, explain the  
problem and request assistance.  
Definitions  
NOTE: A special point of information that the operator  
must be aware of before continuing.  
3. For further assistance write to:  
Land Pride  
Service Department  
P.O. Box 5060  
IMPORTANT: A special point of information related to  
its preceding topic. Land Pride’s intention is that this  
information should be read and noted before  
continuing.  
Salina, KS 67402-5060  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Land Pride  
Section 1 Assembly and Set-Up  
Section 1 Assembly and Set-Up  
1. Insert the gauge wheels (#1) through the gauge wheel  
arms as shown, placing the spacers (#2) and (#3) to  
the desired height.  
Gauge Wheel Assembly  
The gauge wheels are disassembled during shipping.  
They will need to be unbanded from the crate and  
reassembled.  
2. Secure with pin (#4).  
18547  
Dealer Gauge Wheel Assembly  
Figure 1-1  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
6
Land Pride  
Section 2 Operating  
Section 2 Operating  
SPS2048.  
Tractor Requirements  
3. Secure the tractor’s top link to the seeder top hitch  
using a 1” diameter hitch pin. Adjust tractor top link in  
order to level the seeder.  
This Pulverizer Seeder is designed for tractors in the  
Category 1 class. Horsepower rating of the tractor should  
not exceed 40 HP.  
Seeder Preparation and Use  
Before proceeding with the first time setup, or before  
making any adjustments mentioned in this section, make  
every effort to obtain and hitch a tractor to the seeder.  
Adequate front end weight is required on tractors for use  
with the seeder. Check tractor’s 3-point lifting capacity.  
Refer to “Section 5 Specifications and Capacities” on  
Page 22 for seeder weight.  
1. This seeder can be transported with a full box of seed.  
It is best not to do this unless necessary because the  
increased weight does increase the chances for  
problems on the road. Do not exceed 20 miles per  
hour.  
NOTE: In order to maintain steering control, ballast  
may have to be added to your tractor. To determine  
whether or not to add ballast, refer to your tractor  
operator’s manual.  
2. Calibrate your seeder for a proper rate based on the  
seed you are using. Calibration information is located  
on the inside of your box lid or on page 9.  
Operating Check List  
In addition to design and configuration of equipment;  
hazard control and accident prevention are dependent  
upon the awareness, concern, prudence and proper  
training involved in its operation, transport, maintenance  
and storage of equipment. Before beginning to operate  
your Seeder, the following inspection should be  
performed.  
3. Make sure the feed cup door adjustment handle on  
each cup is set the same across the seeder.  
4. Never allow anyone to ride on the seeder.  
5. Maximum seeding speed will vary according to soil  
conditions.  
6. Check that all plugs and caps have been replaced  
properly.  
Check  
Reference  
Read and follow the “Safety Rules”  
carefully.  
Important Safety  
Information Page1-  
6
7. Be sure all bolts and nuts are tight.  
8. Be certain all guards are in place and secure.  
Read all of the "Tractor Hook Up" and  
Section 2  
page 7  
preparation instructions.  
9. Clear the area to be seeded of rocks, branches and  
other foreign objects.  
“Basic Operations” in this Manual  
Operator’s  
Manual  
10. To begin seeding lower unit to the ground.  
11. At first begin seeding at a slow forward speed and shift  
up until the desired speed is achieved.  
Lubricate the seeder as needed. Refer to  
"Lubrication"  
Section 4  
page 20  
Check the seeder initially and periodically for Section 8  
12. Periodically check that seed is being distributed  
through the feeder cups.  
loose bolts & pins, "Torque Values Chart".  
page 26  
Make sure all guards and shields are in  
place.  
Operator’s  
Manual  
Transporting  
Check initially and periodically for loose bolts, Operator’s  
pins, and chains.  
Manual  
!
CAUTION  
When traveling on public roads whether at night or during the  
day, use accessory light and devices for adequate warning to  
operators of other vehicles. Comply with all federal, state and  
local laws.  
Inspect the feed cups and seed tubes for  
foreign matter.  
Section 7  
page 25  
Set speed change sprocket for drive type  
desired.  
Section 3  
page 9  
Set seed rate. See "Seed Rate Charts".  
Section 3  
page 12  
1. Select a safe ground travel speed when transporting  
from one area to another. When traveling on  
roadways, transport in such a way that faster moving  
vehicles may pass you safely.  
Tractor 3-Point Hookup  
1. Back tractor up to seeder until 3-Point links are  
aligned with hitch clevises on seeder.  
2. Reduce tractor ground speed when turning. Leave  
enough clearance so the seeder does not contact  
obstacles such as buildings, trees or fences.  
2. Secure the tractor’s 3-Point lower links to the lower  
hitch clevises using 7/8” diameter hitch pins on the  
SPS3072 and secure to the lower hitch pins on the  
3. When traveling over rough or hilly terrain, shift tractor  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Land Pride  
Section 2 Operating  
to a lower gear.  
time.  
If you have a 72" seeder, you will need to rotate the rear  
roller exactly 62 rotations to simulate 1,000 square feet of  
coverage. If you have a 48" seeder you will need to rotate  
the rear roller exactly 88 rotations to simulate 1000 square  
feet of coverage. Once you have completed the proper  
number of rotations, gather up the seed you have captured  
in your drop cloth and weigh it. Divide this number by  
three, which represents how much seed is coming out of  
each seed cup for 1,000 of coverage. Multiply that figure  
by the total number of seed cups on your seeder to  
determine how many pounds you are actually putting  
down for 1,000 square feet of coverage. If the results are  
not what you expect or do vary greatly from suggested  
settings on the chart, re-verify your settings and repeat the  
calibration process.  
Parking  
The following steps should be done when preparing to  
store the seeder or unhitch it from the tractor. See also  
“Section 4 Maintenance and Lubrication” on Page 20  
for additional information on long term storage of your  
seeder.  
1. Park the seeder on a level, solid area.  
2. Shut off tractor engine and engage parking brake.  
3. Unhitch from tractor.  
Drive System  
Your Pulverizer Seeder uses standard no. 40 roller chain  
throughout its drive system. The drive system is simple  
and designed for low maintenance.  
Once you are satisfied with your calibration settings, load  
the seed hopper and head for the planting site. You should  
have already removed any sizeable sticks, rocks, or  
extraneous debris from this area. Make sure the seeder  
drive clutch is engaged. It is best to start out slow to make  
sure that all systems are working properly. Seeding and  
pulverizing action will commence as soon as the rear roller  
touches the ground and begins to roll. You can increase  
your speed when you are confident that you are achieving  
the desired results. Seeding will stop when you lift the unit  
off of the ground.  
1. Check the drive idler arms to insure that they are  
taking up any excess chain slack.  
2. Check each chain to insure that it is not over-tight.  
3. Annually clean and lubricate chain with chain oil.  
Operating Instructions  
Prior to putting your Land Pride Pulverizer Seeder into  
service you must thoroughly review the Operator’s  
Manual. You will also need to properly attach your seeder  
to the tractor, and completely and properly perform all  
functions identified in the Operator’s Checklist. Once you  
have performed the tractor attachment and Checklist  
functions, you are ready to proceed with final seeder  
calibration and use.  
If you need to increase or decrease the cultivating action  
of the scarifiers, you can do this by raising or lowering the  
front mounted pneumatic gage wheels. Down pressure of  
the rear pulverizing roller can be adjusted by the spring  
tensioners located at both ends of the roller. If you are  
getting a build-up on the either the gage wheels or the rear  
roller, seeding operations should be discontinued until the  
ground is dry enough to work. If the ground needs more  
cultivation than can be achieved in one pass, disengage  
the seeder drive clutch and make additional passes using  
the scarifier and pulverizer only.  
In performing your Operator’s Checklist functions, you  
should have already determined the proper seed rate  
setting for the seed you are applying. This will always be  
determined from the seed rate chart located either in your  
Operator’s Manual or under the hopper lid of your seeder.  
You should have chosen the proper "speed rate sprocket  
selection", properly positioned the levers on your seed  
cups, and properly positioned your seed rate handle. In  
order to perform final calibration, you will need to raise the  
seeder off the ground, safely supporting the unit so the  
rear roller can rotate freely.  
Once you are finished using your seeder, make sure you  
empty out the hopper, disengage the clutch, and clean out  
the seed cups. Park it on a dry and level surface and make  
it ready for the next use.  
Engage the seeder drive clutch and rotate the rear roller to  
make sure the drive system is working properly. Make sure  
that the seed cups are free of foreign matter. Place a drop  
cloth under one end of the seeder to catch the seed that  
will be metered out for calibration purposes. Place several  
pounds of seed in the hopper directly over the last three  
seed cups at the outboard end you are monitoring. Make  
sure that no seed can flow from any other seed cups at this  
With a little practice you will achieve professional results  
from your Land Pride Pulverizer Seeder.  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
6/26/02  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Land Pride  
Section 3 Adjustments  
Section 3 Adjustments  
Seed Rate Speed Change  
Seeding Adjustments  
1. Using the seed rate charts, beginning on page 12,  
determine the seeding rate for the seed you will be  
planting and make the following adjustments.  
The seed rate speed change is designed to give you two  
speeds for different types of seeds and rates. The two  
drive types are high range (fast speed) and low range  
(slow speed). To change the drive type and chain pitch  
changes, refer to Figure 3-1. Remove 5/8” nut, 5/8” lock  
washer and 5/8” flat washer. Flip speed change sprocket  
for desired drive type.  
a. Decide whether you need the slow or fast drive  
type. Change the speed change sprocket if  
necessary, to the desired drive type, see Figure 3-  
1 on page 9.  
SPS2048 & SPS3072  
b. Locate the seed rate adjustment handle at the  
rear of the seeder and move it to the indicator  
number obtained from the charts, see page 10  
Figure 3-2. For best results, first move adjustment  
handle all the way to the left. Then move the  
handle to the desired setting, moving from a lower  
to a higher number.  
72 + 8 Chain Links  
Speed Change  
Sprocket  
2. There are many factors which will affect seeding rates:  
seed treatment, weight of seed, surface condition of  
seed or roller slippage. Minor adjustments may be  
needed to compensate for these factors.  
SPS2048  
44 Chain Links  
3. The seed rate charts are based on average size seed.  
This may differ from the seed you are using. Use the  
SPS3072  
44 1/2 Chain Links  
seed rate charts as a guide. For lighter than average  
seed, the setting should be increased. For heavier  
than average seed, the setting should be decreased.  
4. Complete the following procedure to calibrate the rate  
for your specific seed.  
a. Place several pounds of seed over three of the  
seed cups at the outboard end of the seeder.  
18497  
b. Raise the seeder off the ground and support  
safely, leaving rear roller to rotate freely.  
High Range  
SPS2048 & SPS3072  
72 Chain Links  
Rotate the rear roller to see that the drive system  
is working properly and the feed cups are free  
from foreign matter.  
Speed Change  
Sprocket  
NOTE: Turn the rear roller clockwise for proper  
feeder cup rotation.  
c. Place a drop cloth under the seeder to gather the  
seed as it is metered.  
SPS2048  
d. Rotate the drive roller assembly. For 72” seeder:  
62 rotations to get 1,000 sq. feet, or 680 rotations  
to get 1/4 acre. For 48”seeder: 88 rotations to get  
1,000 square feet or 960 rotations to get 1/4 acre.  
44 +8 Chain Links  
SPS3072  
47 + 1/2 +8 Chain Links  
Be sure to check the three feeder cups to make  
sure each cup has plenty of seed coming into it.  
e. Weigh the seed which has been metered. Divide  
by three. This will give you the ounces/pounds  
metered by each feeder cup. Convert to pounds  
and multiply by the number of cups on your  
seeder to arrive at the total pounds per 1000  
square feet your seeder would meter at that  
setting. If this figure is different than desired, set  
your feed cup adjustment lever accordingly.  
18498  
Low Range  
5. You may want to repeat the calibration procedure if the  
results of your calibration vary greatly from the  
suggested settings on the chart.  
Speed Change & Chain Pitches  
Figure 3-1  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Land Pride  
Section 3 Adjustments  
Roller Down Pressure  
Refer to Figure 3-3:  
NOTE: To determine seed rates for seeds not listed  
on the charts, compare weight and size to those  
listed and use a similar setting. Follow steps 4 and 5  
to calibrate the seed rate.  
Maintaining proper roller down pressure is important for  
consistent roller to soil contact. The feeder cups are driven  
off the roller. Adjusting nut up, which compresses spring  
and decreases dimension giving more pressure to roller.  
Adjusting nut down decreases roller pressure. Not enough  
down pressure may not compact the soil sufficiently for  
proper seed germination.  
IMPORTANT: Field conditions will affect seeding  
rates. When seeding check the amount of seed you  
are using by noting acres or square feet seeded,  
amount of seed added to seeder, and level of seed in  
the seed box. If you suspect that you are seeding  
more or less seed than desired, and you have  
accurately calibrated the seeder to your seed, you  
may need to adjust the seeding rate slightly to  
compensate for field conditions.  
NOTE: For best results set both ends the same.  
NOTE: This seeder is equipped with a four-position  
feed cup door on each feed cup. The highest handle  
position is for small seeds, the second and third  
positions are for larger seeds. For application with  
this seeder, you will only need to use the highest  
position. MAKE SURE all handles are in the same  
position before seeding. The wide open position will  
allow complete clean out of the feed cup.  
DO NOT open the cup to the wide open position with  
seed in the box unless complete clean out is desired.  
18494  
Down Pressure Adjustment  
Figure 3-3  
18494  
Seed Rate Handle  
Figure 3-2  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
6/26/02  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Land Pride  
Section 3 Adjustments  
Shanks  
Shank Working Depth  
The working depth of the shanks can be adjusted by the  
gauge wheels.  
Refer to Figure 3-4:  
Shanks can be removed & installed upside down to give  
dual life to shanks.  
Place spacers (#2) & (#3) at desired height and secure  
with pin (#4).  
1. Remove bolt and nut (#1) from one end of pulverizer.  
2. Pull rod (#2) from channel.  
3. Flip shanks (#3) over and reinstall rod (#2)  
4. Reinstall bolt and nut (#1).  
18547  
Shanks  
Shank Working Depth  
Figure 3-4  
Figure 3-5  
Clutch Engagement (Disengagement)  
The Clutch can be engaged by turning the pin until the pin slides in the groove. Disengage by pulling out on the pin and  
turning it until it is out of the groove. (Engaged for seeding.)  
Clutch Engagement  
18492  
Figure 3-6  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
     
Land Pride  
Section 3 Adjustments  
Seed Rate Chart for SPS2048  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Alfalfa (Pounds per Acre)  
High Range  
Low Range  
0
37.8 87.5 138.61 188.3 238.7 288.4 339.5 388.5 438.2 489.3 538.3 589.4 639.1 689.5 739.2 790.3 839.3 889.0 940.1 989.1  
0
11.9 28.0  
44.1  
59.5 75.6 91.7 107.8 123.2 138.6 154.7 170.8 186.9 202.3 218.4 234.5 250.6 266.0 281.4 297.5 313.6  
Alfalfa (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.8  
0.3  
2.0  
0.6  
3.2  
1.0  
4.3  
1.4  
5.5  
1.8  
6.4  
2.1  
7.8  
2.5  
9.0 10.1 11.3 12.4 13.6 14.7 15.8 17.0 18.1 19.3 20.4 21.6 22.8  
2.8 3.2 3.6 3.9 4.3 4.6 5.0 5.4 5.7 6.1 6.4 6.9 7.2  
Bent Grass (Pounds per Acre)  
High Range  
Low Range  
0
0
25.9 56.0  
11.9 20.3  
80.5 106.4 129.5 144.2 167.3 185.5 205.1 228.2 250.6 266.0 289.1 307.3 326.9 349.3 369.6 387.8 410.2 433.3  
29.4  
37.8 46.2 53.9 62.3 69.3 77.0 85.4 91.7 98.0 104.3 111.3 117.6 122.5 128.8 133.7 138.6 143.5  
Bent Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.6  
0.3  
1.3  
0.5  
1.8  
0.7  
2.5  
0.8  
2.9  
1.1  
3.3  
1.3  
3.9  
1.4  
4.3  
1.6  
4.7  
1.8  
5.3  
2.0  
5.7  
2.1  
6.1  
2.2  
6.7  
2.4  
7.1  
2.5  
8.1  
2.7  
8.5  
2.8  
8.9  
2.9  
8.9  
3.1  
9.5  
3.2  
9.9  
3.3  
Bermuda - Hulled (Pounds per Acre)  
High Range  
Low Range  
0
0
42.7 70.7 112.7 144.2 175.0 206.5 238.7 270.2 301.0 332.5 364.7 395.5 427.0 457.8 490.7 521.5 552.3 583.8 616.0 647.5  
13.3 22.4 35.7 45.5 55.3 65.1 75.6 85.4 95.2 105.0 115.5 125.3 135.1 144.9 155.4 165.2 175.0 184.8 195.3 205.1  
Bermuda -Hulled (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.0  
0.3  
1.6  
0.5  
2.6  
0.8  
3.3  
1.1  
4.1  
1.3  
4.8  
1.5  
5.5  
1.8  
6.2  
2.0  
6.9  
2.2  
7.6  
2.7  
8.4  
2.7  
9.1  
2.9  
9.8 10.5 11.3 12.0 12.7 13.4 14.1 14.9  
3.1 3.4 3.6 3.8 4.0 4.3 4.5 4.7  
Buffalo Grass Sharps Improved (Pounds per Acre)  
High Range 0.00  
Low Range 0.0  
0.0  
0.0  
0.0  
0.0  
15.4  
9.1  
36.4 53.2 74.2 91.0 111.3 129.5 149.1 168.7 181.3 205.1 224.7 246.4 259.7 276.5 291.9 301.0 303.8  
14.7 20.3 26.6 32.2 39.2 45.5 51.1 58.1 64.4 69.3 76.3 82.6 88.9 93.8 100.1 102.9 105.0  
Buffalo Grass Sharps Improved (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.4  
0.2  
0.8  
0.4  
1.2  
0.5  
1.7  
0.6  
2.1  
0.8  
2.5  
0.9  
2.9  
1.1  
3.4  
1.2  
3.9  
1.3  
4.3  
1.5  
4.7  
1.6  
5.2  
1.8  
5.7  
1.9  
6.0  
2.0  
6.4  
2.2  
6.7  
2.3  
6.9  
2.4  
7.0  
2.5  
Clover - Red (Pounds per Acre)  
High Range  
Low Range  
0.0 53.9 100.1 141.4 184.1 224.7 266.0 306.6 349.3 389.9 431.2 473.2 513.8 555.1 596.4 639.1 679.7 721.0 763.0 804.3 844.9  
0.0 16.8 31.5  
44.8  
58.1 71.4 84.0 97.3 110.6 123.9 136.5 149.8 163.1 175.7 189.0 202.3 215.6 228.2 242.2 254.8 268.1  
Clover - Red (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.3  
0.4  
2.3  
0.7  
3.2  
1.1  
4.2  
1.3  
5.2  
1.6  
6.1  
2.0  
7.1  
2.2  
8.1  
2.5  
9.0  
2.9  
9.9 10.9 11.8 12.7 13.7 14.7 15.6 16.6 17.6 18.5 19.5  
3.2 3.4 3.8 4.1 4.3 4.6 5.0 5.3 5.5 5.9 6.2  
Clover - White (Pounds per Acre)  
High Range  
Low Range  
0.0 53.9 105.7 156.8 207.9 260.4 310.8 361.9 414.9 464.8 515.9 568.4 618.8 669.9 722.4 772.8 823.9 876.4 926.8 977.9 1030  
0.0 16.8 33.6 49.7 65.8 82.6 98.7 114.8 130.9 147.7 163.8 179.9 196.0 313.1 228.9 245.0 261.1 277.9 294.0 310.1 326.2  
Clover - White (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.3  
0.4  
2.5  
0.8  
3.6  
1.1  
4.8  
1.5  
6.0  
1.9  
7.1  
2.2  
8.3  
2.7  
9.5 10.7 11.8 13.1 14.2 15.4 16.6 17.8 19.0 20.2 21.3 22.5 23.7  
3.0 3.4 3.8 4.1 4.5 4.9 5.3 5.6 6.0 6.4 6.7 7.1 7.5  
Fescue - Fine Blade, Turf Type (Pounds per Acre)  
High Range  
Low Range  
0
0
14 32.2  
4.2 10.5  
52.5  
16.8  
72.1 91.7 112.0 131.6 151.2 169.4 189.7 209.3 228.9 248.5 68.8 88.4 308.0 327.6 347.9 367.5 387.1  
23.1 29.4 35.7 42.0 48.3 53.9 60.2 66.5 72.8 79.1 85.4 91.7 98.0 103.6 109.9 116.2 122.5  
Fescue - Fine Blade, Turf Type (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.4  
0.1  
0.8  
0.2  
1.2  
0.4  
1.7  
0.5  
2.1  
0.7  
2.6  
0.8  
3.0  
1.0  
3.5  
1.1  
3.9  
1.3  
4.3  
1.4  
4.8  
1.5  
5.3  
1.7  
5.7 6.25  
1.8 2.0  
6.7  
2.1  
7.1  
2.2  
7.6  
2.4  
8.0  
2.5  
8.5  
2.7  
8.9  
2.8  
Fescue K-31(Pounds per Acre)  
High Range  
0.0  
0.0 14.7  
35.0  
10.5  
58.1 79.1 98.0 115.5 130.2 156.1 170.1 190.4 213.5 229.6 248.5 267.4 285.6 303.1 307.3 315.0 317.8  
18.2 24.5 30.8 35.7 40.6 48.3 53.2 58.8 66.5 71.4 77.0 82.6 88.9 93.8 95.2 98.0 98.7  
Low Range  
0.0  
0.0 4.2  
Fescue K-31 (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.4  
0.1  
0.8  
0.3  
1.3  
0.4  
1.8  
0.6  
2.2  
0.7  
2.7  
0.6  
3.0  
0.9  
3.6  
1.1  
3.9  
1.2  
4.4  
1.3  
4.9  
1.5  
5.3  
1.6  
5.7  
1.8  
6.2  
1.9  
6.6  
2.0  
7.0  
2.2  
7.1  
2.2  
7.2  
2.2  
7.3  
2.2  
Kentucky Blue Grass (Pounds per Acre)  
High Range  
Low Range  
0.0 16.1 33.6  
0.0 5.6 11.2  
51.1  
16.8  
72.1 87.5 108.5 124.6 143.5 158.9 175.0 191.8 205.1 225.4 233.8 255.5 270.9 284.2 298.2 309.4 318.5  
23.8 28.7 35.7 40.6 46.9 51.8 57.4 63.0 67.2 74.2 76.3 83.3 88.9 93.1 98.0 101.5 104.3  
Kentucky Blue Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.4  
0.1  
0.8  
0.3  
1.2  
0.4  
1.7  
0.6  
2.0  
0.6  
2.5  
0.8  
2.9  
0.9  
3.3  
1.1  
3.6  
1.2  
4.0  
1.3  
4.4  
1.5  
4.7  
1.5  
5.2  
1.7  
5.4  
1.8  
5.9  
1.9  
6.2  
2.0  
6.5  
2.2  
6.9  
2.2  
7.1  
2.3  
7.4  
2.4  
Lovegrass - Sand (Pounds per Acre)  
High Range  
Low Range  
0.0 62.3 98.0 133.7 169.4. 205.1 240.1 275.8 311.5 347.2 382.9 418.6 454.3 490.0 525.7 561.4 596.4 647.5 683.9 720.3 756.7  
0.0 19.6 30.8 42.7 53.9 65.1 76.3 87.5 98.7 109.9 121.1 132.3 144.2 155.4 166.6 177.8 189.0 200.2 211.4 223.3 234.5  
Lovegrass - Sand (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.4  
0.4  
2.2  
0.7  
3.1  
1.0  
3.9  
1.3  
4.7  
1.5  
5.5  
1.8  
6.4  
2.0  
7.1  
2.2  
8.0  
2.5  
8.8  
2.8  
9.6 10.4 11.3 12.1 12.9 13.7 14.9 15.8 16.6 17.4  
3.1 3.3 3.6 3.9 4.1 4.3 4.6 4.8 5.1 .5.4  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
12  
 
Land Pride  
Section 3 Adjustments  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Lovegrass - Weeping (Pounds per Acre)  
High Range  
Low Range  
0.0 76.3 123.2 158.2 200.9 240.1 277.2 313.6 350.7 387.1 424.2 460.6 497.7 534.1 571.2 607.6 644.7 681.1 718.2 754.6 793.1  
0.0 24.5 39.2 50.4 63.7 76.3 87.5 99.4 111.3 122.5 134.4 146.3 157.5 169.4 181.3 192.5 204.4 215.6 227.5 239.4 251.3  
Lovegrass - Weeping (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.8  
0.6  
2.8  
0.9  
.3.6  
1.1  
4.6  
1.5  
5.5  
1.8  
6.4  
2.0  
7.2  
2.3  
8.1  
2.5  
8.9  
2.8  
9.7 10.6 11.4 12.3 13.1 14.0 14.8 15.7 16.5 17.4 18.2  
3.1  
3.4  
3.6  
3.9  
4.1  
4.4  
4.7  
5.0  
5.3  
5.5  
5.7  
Orchard Grass (Pounds per Acre)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0 0.0.  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
Orchard Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0 0.0.0  
Rye Grass - Annual (Pounds per Acre)  
High Range  
Low Range  
0.0 14.7 41.3  
0.0 4.9 13.3  
66.5  
21.0  
91.7 117.6 142.8 169.4 195.3 220.5 245.7 271.6 298.2 323.4 349.3 374.5 401.1 427.0 452.2 477.4 503.3  
29.4 37.1 45.5 53.9 61.6 70.0 77.7 86.1 94.5 102.9 110.6 119.0 127.4 135.1 143.5 151.2 159.6  
Rye Grass - Annual (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.4  
0.1  
0.9  
0.3  
1.5  
0.5  
2.1  
0.7  
2.7  
0.8  
3.3  
1.1  
3.9  
1.3  
4.5  
1.4  
5.0  
5.7  
6.2  
2.0  
6.9  
2.2  
7.4  
2.4  
8.1  
2.5  
8.6  
2.7  
9.2  
2.9  
9.8 10.4 11.0 11.6  
3.1 3.3 3.5 3.6  
1.6 1.8.  
Rye Grass - Perennial (Pounds per Acre)  
High Range  
Low Range  
0.0 25.2 53.9  
0.0 8.4 16.8  
80.5 109.2 137.2 163.8 192.5 220.5 247.1 275.8 303.8 332.5 359.1 387.1 415.8 442.4 470.4 499.1 525.7 553.7  
25.9 34.3 43.4 51.8 60.9 70.0 78.4 87.5 96.6 105.0 114.1 122.5 131.6 140.0 149.1 158.2 166.6 175.7  
Rye Grass - Perennial (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.6  
0.2  
1.3  
0.4  
1.8  
0.6  
2.5  
0.8  
3.2  
1.0  
3.8  
1.2  
4.3  
1.4  
5.0  
1.6  
5.7  
1.8  
6.3  
2.0  
7.0  
2.2  
7.6  
2.5  
8.3  
2.6  
8.9  
2.8  
9.5 10.2 10.9 11.5 12.1 12.7  
3.0  
3.2  
3.4  
3.6  
3.9  
4.1  
Sudan Grass (Pounds per Acre)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
Sudan Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0 .0.0  
Vetch (Pounds per Acre)  
High Range  
0.0 54.6 94.5 133.7 171.5 211.4 250.6 290.5 329.7 367.5 407.4 446.6 486.5 524.3 563.5 603.4 642.6 681.1 720.3 762.3 799.4  
Low Range  
0.0 14.7 26.6  
39.2  
51.1 63.0 75.6 87.5 99.4 111.3 123.9 135.8 147.7 159.6 172.2 184.1 196.0 208.6 220.5 233.1 245.0  
Vetch (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.3  
0.4  
2.2  
0.6  
3.1  
0.9  
3.9  
1.2  
4.8  
1.5  
5.7  
1.8  
6.7  
2.0  
7.6  
2.3  
8.5  
2.6  
9.4 10.3 11.2 12.0 13.0 13.9 14.8 15.7 16.6 17.6 18.3  
2.9 3.2 3.4 3.6 3.9 4.2 4.5 4.8 5.0 5.3 5.6  
Wheatgrass - Crested (Pounds per Acre)  
High Range  
Low Range  
0.0 15.4 25.2  
0.0 4.9 8.4  
35.7  
11.2  
46.9 56.7 66.5 77.7 87.5 97.3 107.1 119.0 128.8 138.6 149.8 159.6 169.4 180.6 191.1 200.9 210.7  
14.7 18.2 21.0 24.5 28.0 30.8 34.3 37.8 40.6 44.1 47.6 50.4 53.9 57.4 60.2 63.7 66.5  
Wheatgrass - Crested (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.4  
0.1  
0.6  
0.2  
0.8  
0.3  
1.1  
0.4  
1.3  
0.4  
1.5  
0.5  
1.8  
0.6  
2.0  
0.6  
2.2  
0.7  
2.5  
0.8  
2.7  
0.8  
2.9  
0.9  
3.2  
1.0  
3.4  
1.1  
3.6  
1.2  
3.9  
1.3  
4.1  
1.3  
4.4  
1.4  
4.6  
1.5  
4.8  
1.5  
Wheatgrass - Western (Pounds per Acre)  
High Range  
Low Range  
0.0  
0.0  
4.9 16.8  
1.4 5.6  
28.7  
9.1  
40.6 53.2 65.1 77.0 88.9 100.8 112.7 125.3 137.2 149.1 161.0 172.9 185.5 197.4 209.3 221.2 233.1  
13.3 16.8 20.3 24.5 28.0 32.2 35.7 39.9 43.4 46.9 51.1 54.6 58.8 62.3 66.5 70.0 74.2  
Wheatgrass - Western (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.1  
0.0  
0.4  
0.1  
0.6  
0.2  
0.9  
0.3  
1.2  
0.4  
1.5  
0.5  
1.8  
0.6  
2.0  
0.6  
2.3  
0.7  
2.6  
0.8  
2.9  
0.9  
3.2  
1.0  
3.4  
1.1  
3.7  
1.2  
4.0  
1.3  
4.3  
1.3  
4.6  
1.5  
4.8  
1.5  
5.1  
1.6  
5.4  
1.7  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
Land Pride  
Section 3 Adjustments  
Seed Rate Chart (Metric Units) for SPS2048  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Alfalfa (Kilograms per Hectare)  
1051.8  
High Range  
Low Range  
0.0 42.3 97.9 155.1 210.7 267.1 322.7 379.8 434.7 490.3 547.4 602.3 659.4 715.0 771.4 827.0 884.2 939.0 994.6  
1106.6  
350.9  
0.0 13.3 31.3 49.3 66.6 84.6 102.6 120.6 137.8 155.1 173.1 191.1 209.1 226.3 244.3 262.4 280.4 297.6 314.8 332.8  
Alfalfa (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
4.1  
1.4  
9.9 15.4 21.2 26.7 31.4 37.9 43.7 49.2 55.0 60.5 66.3 71.8 77.2 83.1 88.5 94.3 99.8 105.6  
3.1 4.8 6.8 8.5 10.3 12.0 13.7 15.7 17.4 19.1 20.8 22.6 24.6 26.3 28.0 29.7 31.4 33.5  
111.1  
35.2  
Bent Grass (Kilograms per Hectare)  
High Range  
Low Range  
0.0 29.0 62.7 90.1 119.0 144.9 161.3 187.2 207.5 229.5 255.3 280.4 297.6 323.4 343.8 365.7 390.8 413.5 433.9 458.9  
0.0 13.3 22.7 32.9 42.3 51.7 60.3 69.7 77.5 86.1 95.5 102.6 109.6 116.7 124.5 131.6 137.1 144.1 149.6 155.1  
484.8  
160.5  
Bent Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
2.7  
1.4  
6.2  
2.4  
8.9 12.0 14.4 16.1 18.8 20.8 22.9 25.6 28.0 29.7 32.5 34.5 39.3 41.4 43.4 43.4  
3.4 4.1 5.1 6.2 6.8 7.9 8.5 9.6 10.3 10.9 11.6 12.3 13.3 13.7 14.4 15.0  
46.1  
15.4  
48.5  
16.1  
Bermuda - Hulled (Kilograms per Hectare)  
High Range  
Low Range  
0.0 47.8 79.1 126.1 161.3 195.8 231.0 267.1 302.3 336.8 372.0 408.0 442.5 477.7 512.2 549.0 583.5 617.9 653.2 689.2  
0.0 14.9 25.1 39.9 50.9 61.9 72.8 84.6 95.5 106.5 117.5 129.2 140.2 151.2 162.1 173.9 184.8 195.8 206.8 218.5  
724.4  
229.5  
Bermuda - Hulled (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
4.8  
1.4  
7.9 12.6 16.1 19.8 23.2 26.7 30.4 33.8 37.3 41.0 44.4 47.9 51.3 55.0 58.4 61.9 65.6  
2.4 4.1 5.1 6.2 7.2 8.5 9.6 10.6 13.0 13.0 14.0 15.0 16.4 17.4 18.5 19.5 20.8  
69.0  
21.9  
72.8  
22.9  
Buffalo Grass - Sharps Improved (Kilograms per Hectare)  
High Range  
0.0  
0.0  
0.0 17.2 40.7 59.5 83.0 101.8 124.5 144.9 166.8 188.7 202.8 229.5 251.4 275.7 290.7 309.3 326.6 336.8  
339.9  
117.5  
Low Range  
0.0  
0.0  
0.0 10.2 16.4 22.7 29.8 36.0 43.9 50.9 57.2 65.0 72.1 77.5 85.4 92.4 99.5 104.9 112.0 115.1  
Buffalo Grass - Sharps Improved (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
1.7  
1.0  
4.1  
1.7  
5.8  
2.4  
8.2 10.3 12.3 14.4 16.7 18.8 21.2 22.9 25.3 27.7 29.1 31.1 32.8  
3.1 3.8 4.4 5.1 5.8 6.5 7.2 7.9 8.5 9.2 9.9 10.6 11.3  
33.8  
11.6  
34.2  
12.0  
Clover - Red (Kilograms per Hectare)  
High Range  
Low Range  
0.0 60.3 112.0 158.2 206.0 251.4 297.6 343.0 390.8 436.2 482.4 529.4 574.8 621.0 667.3 715.0 760.5 806.7 853.6 899.9  
0.0 18.8 35.2 50.1 65.0 79.9 94.0 108.9 123.7 138.6 152.7 167.6 182.5 196.6 211.5 226.3 241.2 255.3 271.0 285.1  
945.3  
300.0  
Clover - Red (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
6.2 11.3 15.7 20.5 25.3 29.7 34.5 39.3 43.7 48.5 53.0 57.8 62.2 67.0 71.8 76.2 81.0 85.8  
90.2  
28.7  
95.0  
2.1  
3.4  
5.1  
6.5  
7.9  
9.6 10.9 12.3 14.0 15.4 16.7 18.5 19.8 21.2 22.6 24.3 25.6 27.0  
30.01  
Clover - White (Kilograms per Hectare)  
1036.9  
1152.8  
365.0  
High Range  
Low Range  
0.0 60.3 118.3 175.4 232.6 291.3 347.7 404.9 463.6 520.0 577.2 635.9 692.3 749.5 808.2 864.6 921.8 980.5  
1094.1  
0.0 18.8 37.6 55.6 73.6 92.4 110.4 128.4 146.5 165.2 183.3 201.3 219.3 237.3 256.1 274.1 292.1 310.9 328.9 346.9  
Clover - White (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
6.2 12.0 17.8 23.2 29.1 34.9 40.7 46.5 52.3 57.8 63.9 69.4 75.2 81.0 86.8 92.6 98.4 103.9 109.7  
2.1 3.8 5.5 7.5 9.2 10.9 13.0 14.7 16.4 18.5 20.2 21.9 23.9 25.6 27.3 29.4 31.1 32.8 34.9  
115.5  
36.6  
Fescue - Fine Blade, Turf Type (Kilograms per Hectare)  
High Range  
Low Range  
0.0 15.7 36.0 58.7 80.7 102.6 125.3 147.2 169.2 189.5 212.2 234.2 256.1 278.0 300.7 322.7 344.6 366.5 389.2 411.2  
0.0 4.7 11.7 18.8 25.8 32.9 39.9 47.0 54.0 60.3 67.4 74.4 81.4 88.5 95.5 102.6 109.6 115.9 123.0 130.0  
433.1  
137.1  
Fescue - Fine Blade, Turf Type (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
1.7  
0.3  
3.8  
1.0  
5.8  
1.7  
8.2 10.3 12.6 14.7 17.1 19.1 21.2 23.6 25.6 28.0 30.1 32.5 34.5 36.9 39.0  
2.4 3.4 4.1 4.8 5.5 6.2 6.8 7.5 8.2 8.9 9.6 10.3 10.9 11.6 12.3  
41.4  
13.0  
43.4  
13.7  
Fescue K-31(Kilograms per Hectare)  
High Range  
Low Range  
0.0  
0.0  
.0 16.4 39.2 65.0 88.5 109.6 129.2 145.7 174.6 190.3 213.0 238.9 256.9 278.0 299.2 319.5 339.1 343.8 352.4  
0.0 4.7 11.7 20.4 27.4 34.5 39.9 45.4 54.0 59.5 65.8 74.4 79.9 86.1 92.4 99.5 104.9 106.5 109.6  
355.6  
110.4  
Fescue K-31 (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
1.7  
0.3  
3.8  
1.4  
6.5  
2.1  
8.9 10.9 13.0 14.7 17.4 19.1 21.5 23.9 25.6 28.0 30.1 32.1 34.2 34.5  
2.7 3.4 4.1 4.4 5.5 5.8 6.5 7.5 7.9 8.5 9.2 9.9 10.6 10.6  
35.2  
10.9  
35.5  
10.9  
Kentucky Blue Grass (Kilograms per Hectare)  
High Range  
Low Range  
0.0 18.0 37.6 57.2 80.7 97.9 121.4 139.4 160.5 177.8 195.8 214.6 229.5 252.2 261.6 285.9 303.1 318.0 333.6 346.2  
0.0 6.3 12.5 18.8 26.6 32.1 39.9 45.4 52.5 58.0 64.2 70.5 75.2 83.0 85.4 93.2 99.5 104.2 109.6 113.6  
356.3  
116.7  
Kentucky Blue Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
1.7  
0.7  
3.8  
1.4  
5.8  
1.7  
8.2  
2.7  
9.9 12.3 14.0 16.1 17.8 19.5 21.5 22.9 25.3 26.3 28.7 30.4 31.8 33.5  
3.1 4.1 4.4 5.1 5.8 6.5 7.2 7.5 8.2 8.5 9.2 9.9 10.6 10.9  
34.5  
11.3  
35.9  
11.6  
Lovegrass - Sand (Kilograms per Hectare)  
High Range  
Low Range  
0.0 69.7 109.6 149.6 189.5 229.5 268.6 308.6 348.5 388.4 428.4 468.3 508.3 548.2 588.2 628.1 677.3 724.4 765.2 805.9  
0.0 21.9 34.5 47.8 60.3 72.8 85.4 97.9 110.4 123.0 135.5 148.0 161.3 173.9 186.4 198.9 211.5 224.0 236.5 249.8  
846.6  
262.4  
Lovegrass - Sand (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
6.8 10.9 15.0 19.1 22.9 27.0 31.1 34.9 39.0 43.1 46.8 50.9 55.0 59.1 62.9 67.0 72.8 76.9  
2.1 3.4 4.8 6.2 7.2 8.5 9.9 10.9 12.3 13.7 15.0 16.1 17.4 18.8 19.8 21.2 22.6 23.6  
81.0  
25.0  
85.1  
26.3  
Lovegrass - Weeping (Kilograms per Hectare)  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
14  
Land Pride  
Section 3 Adjustments  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
High Range  
0.0 85.4 137.8 177.0 224.8 268.6 310.1 350.9 392.4 433.1 474.6 515.3 556.8 597.6 639.1 679.8 721.3 762.0 803.5 844.3  
887.3  
Low Range  
0.0 27.4 43.9 56.4 71.3 85.4 97.9 111.2 124.5 137.1 150.4 163.7 176.2 189.5 202.8 215.4 228.7 241.2 254.5 267.8  
281.2  
Lovegrass - Weeping (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
8.5 13.7 17.8 22.6 27.0 31.1 35.2 39.3 43.4 47.5 51.6 55.7 59.8 63.9 68.4 72.5 76.6 80.7  
84.8  
26.7  
88.9  
28.0  
2.7  
4.4  
5.5  
7.2  
8.5  
9.9 11.3 12.3 13.7 15.0 16.4 17.8 19.1 20.2 21.5 22.9 24.3 25.6  
Orchard Grass (Kilograms per Hectare)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0 .0.0  
0.0 0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
Orchard Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
Rye Grass - Annual (Kilograms per Hectare)  
High Range  
Low Range  
0.0 16.4 46.2 74.4 102.6 131.6 159.8 189.5 218.5 246.7 274.9 303.9 333.6 361.8 390.8 419.0 448.8 477.7 505.9 534.1  
0.0 5.5 14.9 23.5 32.9 41.5 50.9 60.3 68.9 78.3 86.9 96.3 105.7 115.1 123.7 133.1 142.5 151.2 160.5 169.2  
563.1  
178.6  
Rye Grass - Annual (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
1.7  
0.7  
4.4  
1.4  
7.5 10.3 13.3 16.1 19.1 21.9 24.6 27.7 30.4 33.5 36.2 39.3 42.0 45.1 47.9 50.9  
2.4 3.4 4.1 5.1 6.2 6.8 7.9 8.9 9.6 10.6 11.6 12.3 13.3 14.4 15.0 16.1  
53.7  
17.1  
56.4  
17.8  
Rye Grass - Perennial (Kilograms per Hectare)  
High Range  
Low Range  
0.0 28.2 60.3 90.1 122.2 153.5 183.3 215.4 246.7 276.5 308.6 339.9 372.0 401.8 433.1 465.2 495.0 526.3 558.4 588.2  
0.0 9.4 18.8 29.0 38.4 48.6 58.0 68.1 78.3 87.7 97.9 108.1 117.5 127.7 137.1 147.2 156.6 166.8 177.0 186.4  
619.5  
196.6  
Rye Grass - Perennial (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
2.7  
1.0  
6.2  
2.1  
8.9 12.3 15.4 18.5 21.2 24.6 27.7 30.8 34.2 37.3 40.3 43.4 46.5 49.6 53.0 56.1  
59.1  
18.8  
62.2  
19.8  
2.7  
3.8  
4.8  
5.8  
6.8  
7.9  
8.9  
9.9 10.9 12.0 12.6 13.7 14.7 15.7 16.7 17.8  
Sudan Grass (Kilograms per Hectare)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
Sudan Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0  
0.0 .0.0  
Vetch (Kilograms per Hectare)  
High Range  
Low Range  
0.0 61.1 105.7 149.6 191.9 236.5 280.4 325.0 368.9 411.2 455.8 499.7 544.3 586.6 630.4 675.1 718.9 762.0 805.9 852.9  
0.0 16.4 29.8 43.9 57.2 70.5 84.6 97.9 111.2 124.5 138.6 151.9 165.2 178.6 192.7 206.0 219.3 233.4 246.7 260.8  
894.4  
274.1  
Vetch (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
6.2 10.6 15.0 19.1 23.6 28.0 32.5 36.9 41.4 45.8 50.2 54.7 58.8 63.2 67.7 72.1 76.6 81.0  
1.7 3.1 4.4 5.8 7.2 8.5 9.9 11.3 12.6 14.0 15.4 16.7 17.8 19.1 20.5 21.9 23.6 24.6  
85.8  
26.0  
89.5  
27.3  
Wheatgrass - Crested (Kilograms per Hectare)  
High Range  
Low Range  
0.0 17.2 28.2 39.9 52.5 63.4 74.4 86.9 97.9 108.9 119.8 133.1 144.1 155.1 167.6 178.6 189.5 202.1 213.8 224.8  
235.7  
74.4  
0.0  
5.5  
9.4 12.5 16.4 20.4 23.5 27.4 31.3 34.5 38.4 42.3 45.4 49.3 53.3 56.4 60.3 64.2 67.4  
71.3  
Wheatgrass - Crested (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
1.7  
0.7  
2.7  
1.0  
4.1  
1.4  
5.1  
1.7  
6.5  
2.1  
7.5  
2.4  
8.9  
2.7  
9.9 10.9 12.0 13.3 14.4 15.4 16.7 17.8 19.1 20.2 21.5  
3.1 3.4 3.8 4.1 4.4 4.8 5.5 5.8 6.2 6.5 6.8  
22.6  
7.2  
23.6  
7.5  
Wheatgrass - Western (Kilograms per Hectare)  
High Range  
Low Range  
0.0  
0.0  
5.5 18.8 32.1 45.4 59.5 72.8 86.1 99.5 112.8 126.1 140.2 153.5 166.8 180.1 193.4 207.5 220.9 234.2 247.5  
260.8  
83.0  
1.6  
6.3 10.2 14.9 18.8 22.7 27.4 31.3 36.0 39.9 44.6 48.6 52.5 57.2 61.1 65.8 69.7 74.4  
78.3  
Wheatgrass - Western (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0.0  
0.0  
0.7  
0.0  
1.7  
0.7  
3.1  
1.0  
4.4  
1.4  
5.8  
1.7  
7.2  
2.4  
8.5  
2.7  
9.9 11.3 12.6 14.0 15.4 16.7 18.1 19.5 20.8 22.2 23.6  
3.1 3.4 4.1 4.4 4.8 5.1 5.8 6.2 6.5 7.2 7.5  
25.0  
7.9  
26.3  
8.2  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Land Pride  
Section 3 Adjustments  
Seed Rate Chart for SPS3072  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Alfalfa (Pounds per Acre)  
High Range  
Low Range  
0
54 125 198 269 341 412 485 555 626 699 769 842 913 985 1056 1129 1199 1270 1343 1413  
0
17  
40  
63  
85 108 131 154 176 198 221 244 267 289 312 335 358 380 402 425 448  
Alfalfa (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.2  
0.4  
2.9  
0.9  
4.5  
1.4  
6.2  
2
7.8  
2.5  
9.2 11.1 12.8 14.4 16.1 17.7 19.4  
3.5 4.6 5.1 5.6 6.1  
21 22.6 24.3 25.9 27.6 29.2 30.9 32.5  
6.6 7.2 7.7 8.2 8.7 9.2 9.8 10.3  
3
4
Bent Grass (Pounds per Acre)  
High Range  
Low Range  
0
0
37  
17  
80 115 152 185 206 239 265 293 326 358 380 413 439 467 499 528 554 586 619  
29  
42  
54  
66  
77  
89  
99 110 122 131 140 149 159 168 175 184 191 198 205  
Bent Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.8  
0.4  
1.8  
0.7  
2.6  
1
3.5  
1.2  
4.2  
1.5  
4.7  
1.8  
5.5  
2
6.1  
2.3  
6.7  
2.5  
7.5  
2.8  
8.2  
3
8.7  
3.2  
9.5 10.1 11.5 12.1 12.7 12.7 13.5 14.2  
3.4 3.6 3.9 4.2 4.4 4.5 4.7  
4
Bermuda - Unhulled (Pounds per Acre)  
High Range  
Low Range  
0
0
61 101 161 206 250 295 341 386 430 475 521 565 610 654 701 745 789 834 880 925  
19  
32  
51  
65  
79  
93 108 122 136 150 165 179 193 207 222 236 250 264 279 293  
Bermuda - Unhulled (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.4  
0.4  
2.3  
0.7  
3.7  
1.2  
4.7  
1.5  
5.8  
1.8  
6.8  
2.1  
7.8  
2.5  
8.9  
2.8  
9.9 10.9  
3.1 3.8  
12  
13  
14  
15 16.1 17.1 18.1 19.2 20.2 21.3  
4.8 5.1 5.4 5.7 6.1 6.4 6.7  
3.8  
4.1  
4.4  
Buffalo Grass Sharps Improved (Pounds per Acre)  
High Range  
Low Range  
0
0
0
0
0
0
22  
13  
52  
21  
76 106 130 159 185 213 241 259 293 321 352 371 395 417 430 434  
29  
38  
46  
56  
65  
73  
83  
92  
99 109 118 127 134 143 147 150  
Buffalo Grass Sharps Improved (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0
0
0
0
0.5  
1.2  
0.5  
1.7  
0.7  
2.4  
0.9  
3
3.6  
1.3  
4.2  
1.5  
4.9  
1.7  
5.5  
1.9  
6.2  
2.1  
6.7  
2.3  
7.4  
2.5  
8.1  
2.7  
8.5  
2.9  
9.1  
3.1  
9.6  
3.3  
9.9  
3.4  
10  
0.30  
1.1  
3.5  
Clover - Red (Pounds per Acre)  
High Range  
Low Range  
0
0
77 143 202 263 321 380 438 499 557 616 676 734 793 852 913 971 1030 1090 1149 1207  
24 45 64 83 102 120 139 158 177 195 214 233 251 270 289 308 326 346 364 383  
Clover - Red (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.8  
0.6  
3.3  
1
4.6  
1.5  
6
7.4  
2.3  
8.7  
2.8  
1.1 11.5 12.8 14.2 15.5 16.9 18.2 19.6  
3.2 3.6 4.1 4.5 4.9 5.4 5.8 6.2  
21 22.3 23.7 25.1 26.4 27.8  
6.6 7.1 7.5 7.9 8.4 8.8  
1.9  
Clover - White (Pounds per Acre)  
High Range  
Low Range  
0
0
77 151 224 297 372 444 517 592 664 737 812 884 957 1032 1104 1177 1252 1324 1397 1472  
24 48 71 94 118 141 164 187 211 234 257 280 303 327 350 373 397 420 443 466  
Clover - White (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.8  
0.6  
3.5  
1.1  
5.2  
1.6  
6.8  
2.2  
8.5 10.2 11.9 13.6 15.3 16.9 18.7 20.3  
2.7 3.2 3.8 4.3 4.8 5.4 5.9 6.4  
22 23.7 25.4 27.1 28.8 30.4 32.1 33.8  
7.5 8.6 9.1 9.6 10.2 10.7  
7
8
Fescue - Fine Blade, Turf Type (Pounds per Acre)  
High Range  
Low Range  
0
0
20  
6
46  
15  
75 103 131 160 188 216 242 271 299 327 355 384 412 440 468 497 525 553  
24  
33  
42  
51  
60  
69  
77  
86  
95 104 113 122 131 140 148 157 166 175  
Fescue - Fine Blade, Turf Type (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.5  
0.1  
1.1  
0.3  
1.7  
0.5  
2.4  
0.7  
3
1
3.7  
1.2  
4.3  
1.4  
5
5.6  
1.8  
6.2  
2
6.9  
2.2  
7.5  
2.4  
8.2  
2.6  
8.8  
2.8  
9.5 10.1 10.8 11.4 12.1 12.7  
3.2 3.4 3.6 3.8 4  
1.6  
3
Fescue K-31(Pounds per Acre)  
High Range  
Low Range  
0
0
0
0
21  
6
50  
15  
83 113 140 165 186 223 243 272 305 328 355 382 408 433 439 450 454  
26  
35  
44  
51  
58  
69  
76  
84  
95 102 110 118 127 134 136 140 141  
Fescue K-31 (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.0  
0.0  
0.5  
0.1  
1.1  
0.4  
1.9  
0.6  
2.6  
0.8  
3.2  
1
3.8  
1.2  
4.3  
1.3  
5.1  
1.6  
5.6  
1.7  
6.3  
1.9  
7
7.5  
2.3  
8.2  
2.5  
8.8  
2.7  
9.4  
2.9  
10 10.1 10.3 10.4  
3.1 3.1 3.2 3.2  
2.2  
Kentucky Blue Grass (Pounds per Acre)  
High Range  
Low Range  
0
0
23  
8
48  
16  
73 103 125 155 178 205 227 250 274 293 322 334 365 387 406 426 442 455  
24  
34  
41  
51  
58  
67  
74  
82  
90  
96 106 109 119 127 133 140 145 149  
Kentucky Blue Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.5  
0.2  
1.1  
0.4  
1.7  
0.5  
2.4  
0.8  
2.9  
0.9  
3.6  
1.2  
4.1  
1.3  
4.7  
1.5  
5.2  
1.7  
5.7  
1.9  
6.3  
2.1  
6.7  
2.2  
7.4  
2.4  
7.7  
2.5  
8.4  
2.7  
8.9  
2.9  
9.3  
3.1  
9.8 10.1 10.5  
3.2 3.3 3.4  
Lovegrass - Sand (Pounds per Acre)  
High Range  
Low Range  
0
0
89 140 191 242 293 343 394 445 496 547 598 649 700 751 802 852 925 977 1029 1081  
28  
44  
61  
77  
93 109 125 141 157 173 189 206 222 238 254 270 286 302 319 335  
Lovegrass - Sand (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
2
3.2  
1
4.4  
1.4  
5.6  
1.8  
6.7  
2.1  
7.9  
2.5  
9.1 10.2 11.4 12.6 13.7 14.9 16.1 17.3 18.4 19.6 21.3 22.5 23.7 24.9  
0.6  
2.9  
3.2  
3.6  
4
4.4  
4.7  
5.1  
5.5  
5.8  
6.2  
6.6  
6.9  
7.3  
7.7  
Lovegrass - Weeping (Pounds per Acre)  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
16  
Land Pride  
Section 3 Adjustments  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
High Range  
0
0
109 176 226 287 343 396 448 501 553 606 658 711 763 816 868 921 973 1026 1078 1133  
Low Range  
35 56 72 91 109 125 142 159 175 192 209 225 242 259 275 292 308 325 342 359  
Lovegrass - Weeping (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
2.5  
0.8  
4
5.2  
1.6  
6.6  
2.1  
7.9  
2.5  
9.1 10.3 11.5 12.7 13.9 15.1 16.3 17.5 18.7  
20 21.2 22.4 23.6 24.8  
6.3 6.7 7.1 7.5 7.8  
26  
1.3  
2.9  
3.3  
3.6  
4
4.4  
4.8  
5.2  
5.6  
5.9  
8.2  
Orchard Grass (Pounds per Acre)  
High Range  
Low Range  
0
0
4
1
6
2
10  
3
15  
5
20  
7
27  
9
34  
12  
41  
15  
49  
18  
58  
22  
66  
25  
75  
29  
85  
33  
94 103 112 121 130 138 146  
36  
40  
44  
48  
51  
55  
58  
Orchard Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.1  
0.0  
0.1  
0.0  
0.2  
0.1  
0.3  
0.1  
0.5  
0.2  
0.6  
0.2  
0.8  
0.3  
0.9  
0.3  
1.1  
0.4  
1.3  
0.5  
1.5  
0.6  
1.7  
0.7  
1.9  
0.7  
2.2  
0.8  
2.4  
0.9  
2.6  
1.0  
2.8  
1.1  
3.0  
1.2  
3.2  
1.3  
3.3  
1.3  
Rye Grass - Annual (Pounds per Acre)  
High Range  
Low Range  
0
0
21  
7
59  
19  
95 131 168 204 242 279 315 351 388 426 462 499 535 573 610 646 682 719  
30  
42  
53  
65  
77  
88 100 111 123 135 147 158 170 182 193 205 216 228  
Rye Grass - Annual (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.5  
0.2  
1.3  
0.4  
2.2  
0.7  
3
1
3.9  
1.2  
4.7  
1.5  
5.6  
1.8  
6.4  
2
7.2  
2.3  
8.1  
2.6  
8.9  
2.8  
9.8 10.6 11.5 12.3 13.2  
3.1 3.4 3.6 3.9 4.2  
14 14.9 15.7 16.5  
4.4 4.7 5.2  
5
Rye Grass - Perennial (Pounds per Acre)  
High Range  
Low Range  
0
0
36  
12  
77 115 156 196 234 275 315 353 394 434 475 513 553 594 632 672 713 751 791  
24  
37  
49  
62  
74  
87 100 112 125 138 150 163 175 188 200 213 226 238 251  
Rye Grass - Perennial (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.8  
0.3  
1.8  
0.6  
2.6  
0.8  
3.6  
1.1  
4.5  
1.4  
5.4  
1.7  
6.2  
2
7.2  
2.3  
8.1  
2.6  
9
10 10.9 11.8 12.7 13.6 14.5 15.5 16.4 17.3 18.2  
3.2 3.5 3.7 4.3 4.6 4.9 5.2 5.5 5.8  
2.9  
4
Sudan Grass (Pounds per Acre)  
High Range  
Low Range  
0
0
35  
18  
68 103 141 179 220 262 306 352 398 446 495 545 596 648 701 754 808 862 916  
28  
41  
55  
71  
89 107 127 147 168 189 210 231 252 271 290 308 325 339 352  
Sudan Grass (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.8  
0.4  
1.6  
0.6  
2.4  
0.9  
3.2  
1.3  
4.1  
1.6  
5.1  
2.0  
6.0  
2.5  
7.0  
2.9  
8.1  
3.4  
9.1 10.2 11.4 12.5 13.7 14.9 16.1 17.3 18.5 19.8 21.0  
3.9 4.3 4.8 5.3 5.8 6.2 6.7 7.1 7.5 7.8 8.1  
Vetch (Pounds per Acre)  
High Range  
0
0
78 135 191 245 302 358 415 471 525 582 638 695 749 805 862 918 973 1029 1089 1142  
Low Range  
21  
38  
56  
73  
90 108 125 142 159 177 194 211 228 246 263 280 298 315 333 350  
Vetch (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
1.8  
0.5  
3.1  
0.9  
4.4  
1.3  
5.6  
1.7  
6.9  
2.1  
8.2  
2.5  
9.5 10.8 12.1 13.4 14.7  
2.9 3.3 3.7 4.1 4.5  
16 17.2 18.5 19.8 21.1 22.4 23.7 25.1 26.2  
4.9 5.2 5.6 6.4 6.9 7.2 7.6  
6
8
Wheatgrass - Crested (Pounds per Acre)  
High Range  
Low Range  
0
0
22  
7
36  
12  
51  
16  
67  
21  
81  
26  
95 111 125 139 153 170 184 198 214 228 242 258 273 287 301  
30  
35  
40  
44  
49  
54  
58  
63  
68  
72  
77  
82  
86  
91  
95  
Wheatgrass - Crested (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.5  
0.2  
0.8  
0.3  
1.2  
0.4  
1.5  
0.5  
1.9  
0.6  
2.2  
0.7  
2.6  
0.8  
2.9  
0.9  
3.2  
1
3.5  
1.1  
3.9  
1.2  
4.2  
1.3  
4.5  
1.4  
4.9  
1.6  
5.2  
1.7  
5.6  
1.8  
5.9  
1.9  
6.3  
2
6.6  
2.1  
6.9  
2.2  
Wheatgrass - Western (Pounds per Acre)  
High Range  
Low Range  
0
0
7
2
24  
8
41  
13  
58  
19  
76  
24  
93 110 127 144 161 179 196 213 230 247 265 282 299 316 333  
29  
35  
4
46  
51  
57  
62  
67  
73  
78  
84  
89  
95 100 106  
Wheatgrass - Western (Pounds per 1000 Square Feet)  
High Range  
Low Range  
0.0  
0.0  
0.2  
0
0.5  
0.2  
0.9  
0.3  
1.3  
0.4  
1.7  
0.5  
2.1  
0.7  
2.5  
0.8  
2.9  
0.9  
3.3  
1
3.7  
1.2  
4.1  
1.3  
4.5  
1.4  
4.9  
1.5  
5.3  
1.7  
5.7  
1.8  
6.1  
1.9  
6.5  
2.1  
6.9  
2.2  
7.3  
2.3  
7.7  
2.4  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
Land Pride  
Section 3 Adjustments  
Seed Rate Chart (Metric) for SPS3072  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Alfalfa (Kilograms per Hectare)  
High Range  
Low Range  
0
0
60 140 222 301 382 461 543 621 700 782 860 942 1021 1102 1181 1263 1341 1421 1503 1581  
19  
45  
70  
95 121 147 172 197 222 247 273 299 323 349 375  
41 425 450 475  
501  
Alfalfa (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
6
2
14  
4
22  
7
30  
10  
38  
12  
45  
15  
54  
17  
62  
20  
70  
22  
79  
25  
86  
27  
95 103 110 119 126 135 143 151  
30 32 35 38 40 42 45 48  
159  
50  
Bent Grass (Kilograms per Hectare)  
High Range  
Low Range  
0
0
41  
19  
90 129 170 207 230 267 296 328 365 401 425 462 491 522 558 591 620 656  
693  
229  
32  
47  
60  
74  
86 100 111 123 136 147 157 167 178 188 196 206 214 222  
Bent Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
4
2
9
3
13  
5
17  
6
21  
7
23  
9
27  
10  
30  
11  
33  
12  
37  
14  
40  
15  
42  
16  
46  
17  
49  
18  
56  
19  
59  
20  
62  
21  
62  
21  
66  
22  
69  
23  
Bermuda (Kilograms per Hectare)  
High Range  
Low Range  
0
0
68 113 180 230 280 330 382 432 481 531 583 632 682 732 784 834 883 933 985 1035  
21  
36  
57  
73  
88 104 121 136 152 168 185 200 216 232 248 264 280 295 312  
328  
Bermuda (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
7
2
11  
3
18  
6
23  
7
28  
9
33  
10  
38  
12  
43  
14  
48  
15  
53  
19  
59  
19  
63  
20  
68  
21  
73  
23  
79  
25  
83  
26  
88  
28  
94  
30  
99  
31  
104  
33  
Buffalo Grass (Kilograms per Hectare)  
High Range  
Low Range  
0
0
0
0
0
0
25  
15  
58  
23  
85 119 145 178 207 238 270 290 328 359 394 415 442 467 481  
486  
168  
32  
43  
51  
63  
73  
82  
93 103 111 122 132 142 150 160 164  
Buffalo Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
0
0
0
0
2
1
6
2
8
3
12  
4
15  
5
18  
6
21  
7
24  
8
27  
9
30  
10  
33  
11  
36  
12  
40  
13  
42  
14  
44  
15  
47  
16  
48  
17  
49  
17  
Clover - Red (Kilograms per Hectare)  
High Range  
Low Range  
0
0
86 160 226 294 359 425 490 558 623 689 756 821 887 953 1021 1086 1152 1219 1286 1350  
27  
50  
72  
93 114 134 156 177 198 218 239 261 281 302 323 345 365 387 407  
429  
Clover - Red (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
9
3
16  
5
22  
7
29  
9
36  
11  
42  
14  
49  
16  
56  
18  
62  
20  
69  
22  
76  
24  
83  
26  
89  
28  
96 103 109 116 123 129  
30 32 35 37 39 41  
136  
43  
Clover - White (Kilograms per Hectare)  
High Range  
Low Range  
0
0
86 169 251 332 416 497 578 662 743 825 908 989 1071 1155 1235 1317 1401 1481 1563 1647  
27  
54  
79 105 132 158 183 209 236 262 288 313 339 366 392 417 444 470 496  
521  
Clover - White (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
9
3
17  
5
25  
8
33  
11  
42  
13  
50  
16  
58  
19  
66  
21  
75  
23  
83  
26  
91  
29  
99 107 116 124 132 141 148 157  
31 34 37 39 42 44 47 50  
165  
52  
Fescue - Fine Blade, Turf Type (Kilograms per Hectare)  
High Range  
Low Range  
0
0
22  
7
51  
17  
84 115 147 179 210 242 271 303 335 366 397 430 461 492 524 556 587  
619  
196  
27  
37  
47  
57  
67  
77  
86  
96 106 116 126 136 147 157 166 176 186  
Fescue - Fine Blade, Turf Type (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
2
0
5
1
8
2
12  
3
15  
5
18  
6
21  
7
24  
8
27  
9
30  
10  
34  
11  
37  
12  
40  
13  
43  
14  
46  
15  
49  
16  
53  
17  
56  
18  
59  
19  
62  
20  
Fescue K-31(Kilograms per Hectare)  
High Range  
Low Range  
0
0
0
0
23  
7
56  
17  
93 126 157 185 208 249 272 304 341 367 397 427 456 484 491 503  
508  
158  
29  
39  
49  
57  
65  
77  
85  
94 106 114 123 132 142 150 152 157  
Fescue K-31 (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
0
0
2
0
5
5
9
3
13  
4
16  
5
19  
6
21  
6
25  
8
27  
8
31  
9
34  
11  
37  
11  
40  
12  
43  
13  
46  
14  
49  
15  
49  
15  
50  
16  
51  
16  
Kentucky Blue Grass (Kilograms per Hectare)  
High Range  
Low Range  
0
0
26  
9
54  
18  
82 115 140 173 199 229 254 280 307 328 360 374 408 433 454 477 495  
509  
167  
27  
38  
46  
57  
65  
75  
83  
92 101 107 119 122 133 142 149 157 162  
Kentucky Blue Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
2
1
5
2
8
2
12  
4
14  
4
18  
6
20  
6
23  
7
25  
8
28  
9
31  
10  
33  
11  
36  
12  
38  
12  
41  
13  
43  
14  
45  
15  
48  
16  
49  
16  
51  
17  
Lovegrass - Sand (Kilograms per Hectare)  
High Range  
Low Range  
0
0
100 157 214 271 328 384 441 498 555 612 669 726 783 840 897 953 1035 1093 151 1209  
31  
49  
68  
86 104 122 140 158 176 194 211 230 248 266 284 302 320 338 357  
375  
Lovegrass - Sand (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
10  
3
16  
5
21  
7
27  
9
33  
10  
39  
12  
44  
14  
50  
16  
56  
18  
62  
20  
67  
21  
73  
23  
79  
25  
84  
27  
90  
28  
96 104 110 116  
30 32 34 36  
122  
38  
Lovegrass - Weeping (Kilograms per Hectare)  
High Range  
Low Range  
0
0
122 197 253 321 384 443 501 561 619 678 736 795 854 913 971 1030 1089 1148 1206 1268  
39  
63  
81 102 122 140 159 178 196 215 234 252 271 290 308 327 345 364 383  
402  
Lovegrass - Weeping (Kilograms per 1000 Square Meters)  
High Range 12 20 25 32 39  
0
44  
50  
56  
62  
68  
74  
80  
85  
91  
98 104 109  
15 121  
127  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
18  
Land Pride  
Section 3 Adjustments  
Cup Setting  
0
5
10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100  
Low Range  
0
4
6
8
10  
12  
14  
16  
18  
20  
21  
23  
25  
27  
29  
31  
33  
35  
37  
38  
40  
Orchard Grass (Kilograms per Hectare)  
High Range  
Low Range  
0
0
4
1
7
2
11  
4
17  
5
23  
8
30  
10  
38  
14  
46  
17  
55  
20  
65  
24  
74  
28  
84  
32  
95 105 115 126 136 145 155  
164  
65  
37  
41  
45  
49  
53  
57  
61  
Orchard Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
0
0
1
0
1
0
2
1
2
1
3
1
4
1
5
2
6
2
6
2
7
3
8
3
9
4
11  
4
12  
5
13  
5
14  
5
15  
6
15  
6
16  
6
Rye Grass - Annual (Kilograms per Hectare)  
High Range  
Low Range  
0
0
23  
8
66 106 147 188 228 271 312 352 393 434 477 517 558 599 641 682 723 763  
804  
255  
21  
34  
47  
59  
73  
86  
98 112 124 138 151 164 177 190 204 216 229 242  
Rye Grass - Annual (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
2
1
6
2
11  
3
15  
5
19  
6
23  
7
27  
9
31  
10  
35  
11  
40  
13  
43  
14  
48  
15  
52  
17  
56  
18  
60  
19  
64  
21  
68  
21  
73  
23  
77  
24  
81  
25  
Rye Grass - Perennial (Kilograms per Hectare)  
High Range  
Low Range  
0
0
40  
13  
86 129 175 219 262 308 352 395 441 486 531 574 619 665 707 752 798 840  
885  
281  
27  
41  
55  
69  
83  
97 112 125 140 154 168 182 196 210 224 238 253 266  
Rye Grass - Perennial (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
4
1
9
3
13  
4
18  
5
22  
7
26  
8
30  
10  
35  
11  
40  
13  
44  
14  
49  
16  
53  
17  
58  
18  
62  
20  
66  
21  
71  
22  
76  
24  
80  
25  
84  
27  
89  
28  
Sudan Grass (Kilograms per Hectare)  
High Range  
Low Range  
0
0
39  
20  
77 116 157 201 247 294 343 394 446 500 555 611 668 726 785 845 905 966 1027  
32  
46  
62  
80  
99 120 142 165 188 212 236 259 282 304 325 345 364 380  
395  
Sudan Grass (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
4
2
8
3
12  
5
16  
6
20  
8
25  
10  
29  
12  
34  
14  
39  
16  
45  
19  
50  
21  
56  
24  
61  
26  
67  
28  
73  
30  
79  
33  
84  
35  
91  
36  
97  
38  
103  
39  
Vetch (Kilograms per Hectare)  
High Range  
Low Range  
0
0
87 151 214 274 338 401 464 527 587 651 714 778 838 901 964 1027 1089 1151 1218 1278  
23  
43  
63  
82 101 121 140 159 178 198 217 236 255 275 294 313 333 352 373  
392  
Vetch (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
9
2
15  
4
21  
6
27  
8
34  
10  
40  
12  
46  
14  
53  
16  
59  
18  
65  
20  
72  
22  
78  
24  
84  
25  
90  
27  
97 103 109 116 123  
29 31 34 35 37  
128  
39  
Wheatgrass - Crested (Kilograms per Hectare)  
High Range  
Low Range  
0
0
25  
8
40  
13  
57  
18  
75  
23  
91 106 124 140 156 171 190 206 222 239 255 271 289 305 321  
337  
106  
29  
34  
39  
45  
49  
55  
60  
65  
70  
76  
81  
86  
92  
96 102  
Wheatgrass - Crested (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
2
1
4
1
6
2
7
2
9
3
11  
3
13  
4
14  
4
16  
5
17  
5
19  
6
21  
6
22  
7
24  
8
25  
8
27  
9
29  
9
31  
10  
32  
10  
34  
11  
Wheatgrass - Western (Kilograms per Hectare)  
High Range  
Low Range  
0
0
8
2
27  
9
46  
15  
65  
21  
85 104 123 142 161 180 200 219 238 257 276 296 316 335 354  
373  
119  
27  
32  
39  
45  
51  
57  
64  
69  
75  
82  
87  
94 100 106 112  
Wheatgrass - Western (Kilograms per 1000 Square Meters)  
High Range  
Low Range  
0
0
1
0
2
1
4
1
6
2
8
2
10  
3
12  
4
14  
4
16  
5
18  
6
20  
6
22  
7
24  
7
26  
8
28  
9
30  
9
32  
10  
34  
11  
36  
11  
38  
12  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
Land Pride  
Section 4 Maintenance and Lubrication  
Section 4 Maintenance and Lubrication  
3. The square bore of the feed cup drive sprocket hub  
should be oiled to prevent seizing. Squirt oil on to the  
square feed cup shaft and move feed cup adjustment  
lever back and forth in order to get the oil back into the  
square.  
Maintenance  
Proper servicing and adjustment can increase the life of any  
implement. With careful and systematic inspection, you can  
avoid costly maintenance, time and repair.  
1. After using your seeder for several hours, check all  
bolts to be sure they are tight.  
4. Lubricate all fittings as indicated.  
5. When in storage, lower the seeder with rollers on a  
board or hard surface and adjust gauge wheels.  
2. After transporting your seeder for several hours,  
check all wheel lugs, bolts and nuts to be sure they are  
tight. Always maintain proper air pressure in the tires.  
6. Repaint parts where paint is worn or scratched to  
prevent rust.  
Storage  
7. Replace all damaged or missing decals.  
1. At the end of the working season or when your  
Pulverizer Seeder will not be used for a long period, it  
is good practice to clean off any dirt or grease that  
may have accumulated on the seeder and any of the  
moving parts.  
8. Store the seeder inside if possible. Inside storage will  
reduce maintenance and make for a longer seeder  
life.  
9. Inspect the pulverizer seeder for loose, damaged or  
worn parts and adjust or replace if needed.  
2. Be sure that the seedbox is completely cleaned before  
storing.  
Lubrication  
Multi-purpose  
spray lube  
Multi-purpose  
grease lube  
Multi-purpose  
oil lube  
Intervals at which  
lubrication is required  
Lubrication  
50  
Legend  
50  
Feed Cup Drive Shaft  
Type of Lubrication: Oil  
Quantity = Generously  
18531  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
6/26/02  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Land Pride  
Section 4 Maintenance and Lubrication  
25  
Wheel Bearings  
Type of Lubrication: Multi-Purpose  
Quantity = Coat Generously  
18492  
As  
Required  
Roller Chains (4 chains)  
Type of Lubrication: Chain Lubricant  
Quantity = Generously  
18497  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
Land Pride  
Section 5 Specifications and Capacities  
Section 5 Specifications and Capacities  
90” overall  
Width  
Seeding Width (Broadcast)  
Weight (Approximate Pounds)  
Seed Capacity  
72”  
1150#  
1 Bushel/Foot (6 bushel)  
Chain Driven from right side of rear roller with paddle type agitator above  
seed cups  
Feeder Cup Drive (Roller Drive)  
Wide or Narrow  
Reversible scarifier shank  
Soil Pulverizer-Front  
25 reversible scarifier shanks for loosening soil  
6 5/8” Dia. spiked roller with clean brush. 1” sealed bearing mounted on  
pivoting spring loaded arms  
Bed Forming Rollers - Rear  
Category I  
Hitch  
SPS3072 Specification Drawing  
Figure 7-1  
11042  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
22  
 
Land Pride  
Section 5 Specifications and Capacities  
SPS2048  
69 5/16” overall  
50 7/8”  
Width  
Seeding Width (Broadcast)  
Weight (Approximate Pounds)  
Seed Capacity  
950#  
1 Bushel/Foot (6 bushel)  
Chain Driven from right side of rear roller with paddle type agitator  
above seed cups  
Feeder Cup Drive (Roller Drive)  
Wide or Narrow  
Reversible scarifier shank  
Soil Pulverizer-Front  
17 reversible scarifier shanks for loosening soil  
6 5/8” Dia. spiked roller with clean brush. 1” sealed bearing mounted  
on pivoting spring loaded arms  
Bed Forming Rollers - Rear  
Category I  
Hitch  
SPS2048 Specification Drawing  
Figure 7-2  
18500  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Land Pride  
Section 6 Features and Benefits  
Section 6 Features and Benefits  
Features  
Benefits  
Working widths  
HP Range  
20 Series: 60”, 72”; 30 Series: 72”, 84”  
20 Series: 25-35 HP; 30 Series: 30-50 HP  
Replaceable heat-treated sleeves  
Heat-treated replaceable sleeves on roller protect spike. Easily replace the sleeve  
when worn vs. replacing entire spike.  
3/8” Steel spikes welded to the roller’s  
surface  
Spikes are welded to the roller’s surface rather than to a hole. Damaged spikes can  
be cut off and replaced.  
Self-aligning bearings with double lip  
seals on rear roller  
Self-aligning bearings conform to the roller and shafts.  
1” Diameter shaft in roller  
Heavy shaft can handle the shock loads from the roller.  
Roller has most number of steel spikes Better pulverization  
on it  
H Beam  
20 Series: H Beam-10”; 30 Series: H Beam-12”  
10 1/2” x 2” x 1/2” Scarifier teeth  
Scarifier teeth are heat-treated for long life and can be reversed when one side  
wears down.  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6/26/02  
24  
Land Pride  
Section 7 Troubleshooting  
Section 7 Troubleshooting  
Problem  
Solution  
Check for plugging in feed cup.  
Reduce ground speed.  
Uneven seed spacing or uneven stand.  
Check for trash or mud buildup on roller.  
Seed treatment will affect seeding rate if the chemicals buildup in feed cup. Unless  
cleaned regularly, this buildup can cause breakage of the feed cup shaft.  
Actual seeding rate is different than  
desired.  
Check for foreign matter lodged in feed cup sprocket.  
Feed cup sprocket locked up or twisted  
feed cup drive shaft.  
Check for trash or mud buildup on roller end.  
Rollers not turning freely.  
Seed does not meter.  
Clutch not engaged. See Clutch Engagement (Disengagement) page 11 Figure 3-6  
Lift shanks out of ground when turning  
Shanks bending sideways  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Land Pride  
Section 8 Appendix  
Section 8 Appendix  
Torque Values Chart for Common Bolt Sizes  
Bolt Head Identification  
Bolt Head Identification  
8.8  
5.8  
10.9  
Bolt Size  
(Inches)  
Bolt Size  
(Metric)  
Grade 2  
2
Grade 5  
N · m  
Class 5.8  
Class 8.8  
Class 10.9  
Grade 8  
1
3
4
in-tpi  
N · m  
v-lb  
ft-lb  
8
N · m  
ft-lb  
12  
mm x pitch  
M 5 X 0.8  
M 6 X 1  
N · m  
ft-lb  
3
N · m  
ft-lb  
5
N · m  
9
ft-lb  
7
1/4" - 20  
1/4" - 28  
5/16" - 18  
5/16" - 24  
3/8" - 16  
3/8" - 24  
7/16" - 14  
7/16" - 20  
1/2" - 13  
1/2" - 20  
9/16" - 12  
9/16" - 18  
5/8" - 11  
5/8" - 18  
3/4" - 10  
3/4" - 16  
7/8" - 9  
7.4  
8.5  
5.6  
6
11  
13  
16  
18  
4
7
6
10  
14  
5
11  
8
15  
11  
15  
11  
24  
17  
33  
25  
M 8 X 1.25  
M 8 X 1  
17  
12  
26  
19  
36  
27  
17  
13  
26  
19  
37  
27  
18  
13  
28  
21  
39  
29  
27  
20  
42  
31  
59  
44  
M10 X 1.5  
33  
24  
52  
39  
72  
53  
31  
22  
47  
35  
67  
49  
M10 X 0.75  
M12 X 1.75  
M12 X 1.5  
M12 X 1  
39  
29  
61  
45  
85  
62  
43  
32  
67  
49  
95  
70  
58  
42  
91  
67  
125  
130  
145  
200  
215  
315  
335  
405  
485  
610  
900  
1050  
1150  
2100  
2320  
3660  
4100  
93  
49  
36  
75  
55  
105  
145  
165  
210  
235  
285  
325  
510  
570  
820  
905  
1230  
1350  
1750  
1960  
2460  
2730  
3230  
3680  
4290  
4820  
78  
60  
44  
95  
70  
97  
66  
49  
105  
115  
150  
165  
205  
230  
360  
405  
585  
640  
875  
955  
1080  
1210  
1520  
1680  
1990  
2270  
2640  
2970  
76  
105  
120  
155  
170  
210  
240  
375  
420  
605  
670  
910  
995  
1290  
1440  
1820  
2010  
2380  
2710  
3160  
3560  
90  
66  
105  
145  
155  
225  
240  
310  
350  
440  
650  
760  
830  
1510  
1680  
2650  
2960  
77  
105  
150  
160  
230  
245  
300  
355  
450  
665  
780  
845  
1550  
1710  
2700  
3220  
75  
55  
85  
M14 X 2  
92  
68  
105  
115  
165  
180  
230  
260  
325  
480  
560  
610  
1120  
1240  
1950  
2190  
95  
70  
110  
120  
150  
170  
265  
295  
430  
475  
645  
705  
795  
890  
1120  
1240  
1470  
1670  
1950  
2190  
M14 X 1.5  
M16 X 2  
99  
73  
105  
130  
150  
235  
260  
225  
250  
340  
370  
480  
540  
680  
750  
890  
1010  
1180  
1330  
79  
145  
155  
195  
220  
280  
310  
480  
525  
960  
1060  
1730  
1880  
105  
115  
145  
165  
205  
230  
355  
390  
705  
785  
1270  
1380  
97  
M16 X 1.5  
M18 X 2.5  
M18 X 1.5  
M20 X 2.5  
M20 X 1.5  
M24 X 3  
110  
170  
190  
165  
185  
250  
275  
355  
395  
500  
555  
655  
745  
870  
980  
7/8" - 14  
1" - 8  
M24 X 2  
1" - 12  
M30 X 3.5  
M30 X 2  
1-1/8" - 7  
1 1/8" - 12  
1 1/4" - 7  
1 1/4" - 12  
1 3/8" - 6  
1 3/8" - 12  
1 1/2" - 6  
1 1/2" - 12  
M36 X 3.5  
M36 X 2  
1
2
3
4
in-tpi = nominal thread dia. inches-threads per inch  
N· m = newton-meters  
ft.-lb= foot pounds  
mm x pitch = nominal thread dia. in millimeters x thread pitch  
Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above.  
Tire Inflation Chart  
Tire Size  
Inflation PSI  
13” x 6” 4- Ply  
28  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
6/26/02  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Land Pride  
Section 8 Appendix  
Warranty  
Land Pride warrants to the original purchaser that this Land Pride product will  
be free from defects in material and workmanship beginning on the date of  
purchase by the end user according to the following schedule when used as  
intended and under normal service and conditions for personal use.  
Overall Unit: One year Parts and Labor  
Ripper shanks and roller studs are considered wear items  
This Warranty is limited to the replacement of any defective part by Land Pride  
and the installation by the dealer of any such replacement part, and does not cover  
common wear items such as blades, belts, tines, etc. Land Pride reserves the right  
to inspect any equipment or parts which are claimed to have been defective in  
material or workmanship.  
This Warranty does not apply to any part or product which in Land Pride’s  
judgment shall have been misused or damaged by accident or lack of normal  
maintenance or care, or which has been repaired or altered in a way which  
adversely affects its performance or reliability, or which has been used for a  
purpose for which the product is not designed. Misuse also specifically includes  
failure to properly maintain oil levels, grease points, and driveline shafts.  
Claims under this Warranty must be made to the dealer which originally sold  
the product and all warranty adjustments must be made through such dealer. Land  
Pride reserves the right to make changes in materials or design of the product at  
any time without notice.  
This Warranty shall not be interpreted to render Land Pride liable for damages  
of any kind, direct, consequential, or contingent to property. Furthermore, Land  
Pride shall not be liable for damages resulting from any cause beyond its  
reasonable control. This Warranty does not extend to loss of crops, any expense  
or loss for labor, supplies, rental machinery or for any other reason.  
No other warranty of any kind whatsoever, express or implied, is made  
with respect to this sale; and all implied warranties of merchantability and  
fitness for a particular purpose which exceed the obligations set forth in this  
written warranty are hereby disclaimed and excluded from this sale.  
This Warranty is not valid unless registered with Land Pride within 30 days from  
the date of purchase by the end user.  
6/26/02  
SPS20 & SPS30 Series Pulverizer Seeders 313-242M  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
Corporate Office: PO. Box 5060  
Salina, Kansas 67402-5060 USA  
www.landpride.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  

La Crosse Technology Marine Instruments WS 6020U IT User Manual
Land Pride Tiller RTA10 User Manual
Lenovo Computer Hardware TD230 User Manual
LG Electronics Computer Monitor W2243S User Manual
LOREX Technology Security Camera SG21CD7444UQ A80 User Manual
Mackie Stereo Amplifier M800 User Manual
Makita Cordless Saw 4334DWD User Manual
Makita Drill XRV02 User Manual
MB QUART Speaker RKC116 User Manual
Melissa Waffle Iron 243 049 User Manual