OWNER’S MANUAL
LCD MONITOR
Please read this manual carefully before operating your set and
retain it for future reference.
LCD MONITOR MODELS
W1943SB
W1943TB
W2043SE W2043TE
W2243S
W2243T
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal (Only, Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
User's Guide/Cards
Power Cord
(Depending on the country)
DVI-D Signal Cable
(This feature is not available
in all countries.)
15-pin D-Sub Signal Cable
(To set it up, this signal cable may
be attached to this product before
shipping out.)
IMPORTANT
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite
cores to maintain standard compliance for the product.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices are turned off.
Connecting and Disassembling the stand
1. Place the monitor face down on the soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction.
Stand Body
Stand Base
3. Turn the Stand Base Lock through 90˚ to fix the Stand Base to the Stand Body.
Base Lock
<Locked>
4. Once assembled, lift the monitor up carefully.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
5. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Stand
Body.
<Unlocked>
If you can't release the Stand Base even the Locking Knob is at a release position,
Please push the indicated knob down and retry it.
Locking Knob
6. Pull out the Stand Base to remove.
IMPORTANT
This picture depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and
get damaged or cause injury.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
-After installation, adjust the angle as shown below.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚~15˚
15
-5
Do not touch or press the screen when
adjusting the angle of the monitor.
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
W1943TB/W2043TE/W2243T
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr cooff.rd
in order, then tighten the screw
1
2
of the signal cable.
A
Connect D-sub(Analog signal) Cable
B
Connect DVI-D(Digital signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
When using a D-Sub signal input cable connector
for Macintosh
Mac adapter : For older Apple Macintosh use,
a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
Varies according to model.
Wall-outlet type
DVI-D (This feature is not available in all countries.)
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
W1943SB/W2043SE/W2243S
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr cooff.rd
in order, then tighten the screw
1
2
of the signal cable.
A
Connect D-sub(Analog signal) Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
When using a D-Sub signal input cable connector for
Macintosh
Mac adapter : For older Apple Macintosh use,
a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
Varies according to model.
Wall-outlet type
A
PC
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Front Panel Controls
W1943TB/W2043TE/W2243T
1 2
3
4
4
5
5
W1943SB/W2043SE/W2243S
1 2
3
Use this button to enter 4:3 IN WIDE, PHOTO EFFECT
menus.
Button
For more information, refer to page 14.
Use this button to enter or exit the On Screen Display.
MENU Button
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Use these buttons to select or adjust functions in the On
Screen Display.
Buttons
Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type).
For more information, refer to page 15.
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub. (Only W1943TB/W2043TE/W2243T )
(SOURCE Hot key)
Use this button to enter a selection in the On Screen
Display.
AUTO/SET
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
W1943SB/W1943TB : 1360 x 768
W2043SE/W2043TE : 1600 x 900
W2243S/W2243T : 1920 x 1080
Use this button to turn the display on or off.
Power Button &
Power Indicator
The power indicator stays red if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking red.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Move where
you want to
adjust
Select a
menu icon
Adjust the
status
Exit from the
menu screen.
Pops up the
menu screen
Press the MENU Button, then the main menu of the OSD appears.
1
2
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level.
3
4
Use the AUTO/SET Button to select other sub-menu items.
Press the MENU Button once to return to the main menu to select another
function. Press the MENU Button twice to exit from the OSD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
: Analog Input only
*
Main menu
4:3 IN WIDE
Sub-menu
Description
To adjust the image size
NORMAL
PHOTO
EFFECT
To adjust the screen color mode
GAUSSIAN BLUR
SEPIA
MONOCHROME
F-ENGINE
MOVIE
To select or customize desired
image settings
INTERNET
USER
NORMAL
DEMO
BRIGHTNESS
CONTRAST
GAMMA
PICTURE
COLOR
To adjust the brightness,
contrast and gamma of the
screen
PRESET
(sRGB / 6500K / 9300K)
To customize the color of the
screen
RED
GREEN
BLUE
* HORIZONTAL
* VERTICAL
To adjust the position of the
screen
TRACKING
SETUP
* CLOCK
To improve the clarity and stability
of the screen
* PHASE
SHARPNESS
LANGUAGE
To customize the screen
status for a user's operating
environment
OSD POSITION
(HORIZONTAL / VERTICAL)
* WHITE BALANCE
POWER INDICATOR
FACTORY RESET
NOTE
The order of icons may differ depending on the model (13~19).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following OSD screen will appear when you press the
the front of the monitor.
button on
MENU : Exit
: Move
SET : Select
Main menu
4:3 IN WIDE
Description
To select the image size of the screen.
4:3
WIDE
• WIDE
: Switch to full screen mode
according to input image signal.
• 4:3
: Change the input image signal ratio to
4:3.
To select the color effects of the screen.
PHOTO
EFFECT
• NORMAL
The PhotoEffect function is disabled.
• GAUSSIAN BLUR
Use the AUTO/SET button
to go to sub-menu.
This menu changes the screen to be more
colorful and smoother.
• SEPIA
This menu changes the screen to be Sepia
tone (brown color).
• MONOCHROME
This menu changed the screen to be Gray
scale(black-and-white Picture) .
NORMAL
SEPIA
MONOCHROME
GAUSSIAN BLUR
14
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following OSD screen will appear when you press the
button
on the front of the monitor.This feature lets you easily select the best desired
image condition optimized to the environment (ambient illumination, image
types etc).
Menu Name
Icons
MENU : Save & Exit
Sub-menu Name
,
: Move
F-ENGINE
Active state
Inactive state
When the F-ENGINE is executed, the screen is split
to show the effects of the selected function. The active
state is to the left and the inactive state is to the right
side of the screen. Select the function you want and
press the [MENU] button to save the setting.
Main menu
Sub menu
Description
For moving images in videos or movies.
MOVIE
INTERNET For text images (Word processing etc.).
USER
USER
You can manually adjust ACE or RCM.
You can save or restore the adjusted value even
when using a different condition
.
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
To adjust the USER sub-menu function,
press the AUTO/SET Button
Not applied
Weak clarity and luminosity contrast.
Strong clarity and luminosity contrast.
• RCM (Real Color Management): Selects the color mode.
Not applied
Salmon color tone
Color Enhance
MENU : Exit
: Decrease
: Increase
Green enhance
SET : Select another sub-menu
NORMAL
DEMO
This is under normal operating conditions.
* Normal mode is when f-ENGINE is turned off.
This is used for advertising in the store. The screen will
be divided to show the standard mode on the left and
video mode on the right so that the consumers can
check the difference after applying the video mode.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main
menu of the OSD appears.
Main Menu
MENU
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button
Tip
Menu Name
Icons
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
To adjust the brightness of the screen.
To adjust the contrast of the screen.
BRIGHTNESS
CONTRAST
GAMMA
Set your own gamma value. : -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
Select the screen color.
• sRGB: Set the screen color to fit the
sRGB standard color
PRESET
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
RED
GREEN
BLUE
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
17
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
HORIZONTAL
To move image left and right.
To move image up and down.
VERTICAL
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
PHASE
MENU : Exit
: Decrease
: Increase
To adjust the clearness of the screen.
SHARPNESS
SET : Select another sub-menu
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
SETUP
W1943SB/W2043SE/W2243S
To choose the language in which the
control names are displayed.
LANGUAGE
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
Activate this function when white
and black colors are present in the
screen.
W1943TB/W2043TE/W2243T
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
POWER
INDICATOR
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
FACTORY
RESET
"LANGUAGE."
Press the
,
buttons to reset immediately.
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following before calling for service.
No image appears
G Is the power cord of the
•
Check and see if the power cord is connected
properly to the power outlet.
display connected?
G Is the power indicator
• Press the Power button.
light on?
•
•
Adjust the brightness and the contrast.
G Is the power on and the
power indicator red?
G Is the power indicator
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
blinking?
• Try to turn on the PC
.
•
•
This message appears when the signal from the
G Do you see an "OUT OF
RANGE" message on
the screen?
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
G Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
Do you see a "OSD LOCKED" message on the screen?
G
Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
G Display Position is
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
incorrect.
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
G On the screen
background, vertical
bars or stripes are
visible.
•
•
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
G Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
G The screen color is
•
•
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
mono or abnormal.
G The screen blinks.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
G
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
•
Make sure to check if the video card supports
Plug&Play function.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W1943TB
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 47.01 cm
0.30 x 0.30 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 61 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green), Digital
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Recommend
VESA 1360 x 768 @60 Hz
VESA 1360 x 768 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
21W(Typ.)
1 W
1 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 44.90 cm / 17.68 inches
Height 36.10 cm / 14.21 inches
Depth 18.30 cm / 7.20 inches
Width 44.90 cm / 17.68 inches
Height 29.05 cm / 11.44 inches
Depth 5.85 cm / 2.30 inches
Weight(excl. packing)
3.3 kg (7.28 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W1943SB
18.51 inches (47.01 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 47.01 cm
0.30 x 0.30 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 61 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green)
Signal Input
Input Form
15 pin D-Sub Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Max
Recommend
VESA 1360 x 768 @60 Hz
VESA 1360 x 768 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
21W(Typ.)
1 W
1 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 44.90 cm / 17.68 inches
Height 36.10 cm / 14.21 inches
Depth 18.30 cm / 7.20 inches
Width 44.90 cm / 17.68 inches
Height 29.05 cm / 11.44 inches
Depth 5.85 cm / 2.30 inches
Weight(excl. packing)
3.3 kg (7.28 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 0.8A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W2043TE
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 50.8 cm
0.2766 x 0.2766 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green), Digital
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Recommend
VESA 1600 x 900 @60 Hz
VESA 1600 x 900 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
25 W(Typ.)
0.5 W
0.5 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 48.36 cm / 19.04 inches
Height 37.68 cm / 14.83 inches
Depth 18.30 cm / 7.20 inches
Width 48.36 cm / 19.04 inches
Height 31.40 cm / 12.36 inches
Depth 6.30 cm / 2.48 inches
Weight(excl. packing)
3.2 kg (7.05 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W2043SE
20.0 inches (50.8 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 50.8 cm
0.2766 x 0.2766 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green)
Signal Input
Input Form
15 pin D-Sub Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Max
Recommend
VESA 1600 x 900 @60 Hz
VESA 1600 x 900 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
25 W(Typ.)
0.5 W
0.5 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 48.36 cm / 19.04 inches
Height 37.68 cm / 14.83 inches
Depth 18.30 cm / 7.20 inches
Width 48.36 cm / 19.04 inches
Height 31.40 cm / 12.36 inches
Depth 6.30 cm / 2.48 inches
Weight(excl. packing)
3.2 kg (7.05 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W2243T
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 54.686 cm
0.248 x 0.248 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green), Digital
Signal Input
Input Form
15 pin D-Sub Connector
DVI-D Connector (Digital)
RGB Analog (0.7 Vp-p/ 75 ohm), Digital
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
40W(Typ.)
1 W
1 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 51.64 cm / 20.33 inches
Height 39.61 cm / 15.59 inches
Depth 19.80 cm / 7.80 inches
Width 51.64 cm / 20.33 inches
Height 33.27 cm / 13.10 inches
Depth 6.20 cm / 2.44 inches
Weight(excl. packing)
3.8 kg (8.38 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W2243S
21.53 inches (54.686 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size : 54.686 cm
0.248 x 0.248 mm (Pixel pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 - 83 kHz (Automatic)
56 - 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green)
Signal Input
Input Form
15 pin D-Sub Connector
RGB Analog (0.7 Vp-p/ 75 ohm)
Max
Recommend
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Resolution
Plug&Play
DDC 2B
:
≤
≤
40W(Typ.)
1 W
1 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 51.64 cm / 20.33 inches
Height 39.61 cm / 15.59 inches
Depth 19.80 cm / 7.80 inches
Width 51.64 cm / 20.33 inches
Height 33.27 cm / 13.10 inches
Depth 6.20 cm / 2.44 inches
Weight(excl. packing)
3.8 kg (8.38 lbs)
Tilt : -5˚~15˚
Range
AC 100-240V~ 50/60Hz 1.0A
Operating Conditions
Power Input
Environment
al Conditions
Temperature
Humidity
10˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Preset Modes (Resolution)
W1943SB/W1943TB
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
70
60
75
60
75
75
60
75
60
1
2
3
4
5
6
7
8
*9
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1360 x 768
31.468
31.469
37.500
37.879
46.875
49.725
48.363
60.123
47.712
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
VESA
W2043SE/W2043TE
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
1
2
3
4
5
6
7
8
*9
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1600 x 900
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
60.000
VGA
VGA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
W2243S/W2243T
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
75
60
60
1
2
720 x 400
640 x 480
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
VGA
VGA
3
640 x 480
VGA
4
800 x 600
800 x 600
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
5
6
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
7
8
9
10
11
*12
*Recommend Mode
Indicator
LED Color
MODE
Red
Red Blinking
Off
On Mode
Sleep Mode
Off Mode
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate
or the interchange device.
1. Place the monitor face down on the soft cloth.
2. Turn the Stand Base Lock through 90˚ to separate the Stand Base from the Stand
Body.
<Unlocked>
If you can't release the Stand Base even the Locking Knob is at a release
position, Please push the indicated knob down and retry it.
Locking Knob
3. Pull out the Stand Base to remove.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall mount plate
4. Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is
purchased. LG recommends that wall mounting be
performed by a qualified professional installer.
Kensington Security Slot
Connected to a locking cable that
can be purchased separately at
most computer stores.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|