La Crosse Technology Clock WS 8418U IT User Manual

WWVB Radio controlled time with manual time setting  
12/24 hour time display  
Time display: hour, minute, second optional  
Alarm setting with snooze function  
WS-8418U-IT  
ATOMIC CLOCK WITH OUTDOOR WIRELESS TEMPERATURE  
AND MOON PHASE  
Calendar display  
Instruction Manual  
Weekday display (4 languages to choose from: English, French, Spanish, and German)  
Time zone setting  
Daylight savings time ON/OFF option (DST)  
ºF or ºC temperature display selectable  
Indoor temperature display  
Outdoor temperature display via 915MHz transmission  
Wall mount or freestanding  
Current moon phase display  
This product offers:  
INSTANT TRANSMISSION is the state-of-the-art  
new  
exclusively designed and developed by LA  
CROSSE TECHNOLOGY. INSTANT  
TRANSMISSION offers you an immediate update  
(every seconds!) of all your outdoor data  
wireless  
transmission  
technology,  
4
OUTDOOR TEMPERATURE SENSOR:  
measured from the transmitters: follow your  
climatic variations in real-time!  
Remote transmission of outdoor temperature to the  
atomic clock by 915 MHz signals  
Wall mounting case  
FEATURES:  
ATOMIC CLOCK:  
Hanging holes  
Holder  
LCD1  
display  
TO INSTALL AND REPLACE BATTERIES IN THE ATOMIC CLOCK  
The atomic clock uses 2 x AA, 1.5V batteries. To install and replace the batteries, please follow  
the steps below:  
1.  
Insert finger or other solid object in the space at the bottom center of the battery  
compartment and lift up to remove the cover.  
Insert batteries observing the correct polarity (see marking inside battery compartment).  
Replace compartment cover.  
Battery cover  
LCD2  
display  
2.  
3.  
Function  
keys  
DO NOT SET THE CLOCK.  
Foldable stand  
1
2
+ key  
:
:
:
To toggle between the second, temperature or weekday display  
To change any values in manual set mode  
To change values in alarm set mode  
To enter into the alarm set mode  
To display the alarm time in normal mode display  
To set the alarm ON/OFF  
TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE SENSOR  
The sensor uses 2 x AA,1.5V batteries. To install and replace the batteries, please follow the  
steps below:  
ALM key  
SNZ key  
1.  
2.  
3.  
Remove the cover.  
Insert the batteries, observing the correct polarity (see marking inside battery compartment).  
Replace the battery cover on the unit.  
To activate the snooze function during alarm  
To exit the setting modes  
Alkaline batteries are recommended for use in both units. Avoid using rechargeable  
batteries.  
ATOMIC CLOCK LCD SCREEN DESCRIPTIONS  
The atomic clock's LCD is divided into 2 sections and once the batteries are inserted, all the  
segments will light up briefly before displaying the information for time, date, indoor and outdoor  
SETTING UP:  
Alkaline batteries are recommended for use in both units. Avoid using  
rechargeable batteries.  
temperatures.  
Radio reception icon  
NOTE: Do not set the clock until the outdoor temperature is displayed.  
1.  
Place batteries in the outdoor sensor first, then into the atomic clock. DO NOT PRESS ANY  
BUTTONS FOR 10 MINUTES.  
Low battery indicator (atomic clock)  
WWVB time  
2.  
Once the batteries are in place, all segments of the LCD will light up briefly. Following the  
indoor temperature, date, weekday, and the time, as 12:00, will be displayed. If they are not  
shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds  
before reinserting them. Once the indoor data is displayed user may proceed to the next  
step.  
After the batteries are inserted, the atomic clock will start receiving data signal from the  
sensor. The outdoor temperature should then be displayed on the atomic clock. If this does  
not happen after 2 minutes, the batteries will need to be removed from both units and reset  
from step 1 and the signal reception icon is no longer shown.  
Alarm icon  
Indoor temperature  
Outdoor temperature display  
Weekday  
3.  
Low battery indicator (sensor)  
Date  
MANUAL SETTINGS  
Note:  
If the atomic clock has already successfully received the WWVB time signal and displays  
Note:  
In the event of changing batteries in the unit, ensure that the batteries do not spring free from the  
contacts. Always wait at least 10 minutes after removing the batteries before reinserting,  
otherwise start up and transmission problems may occur.  
the correct time and date, then the Manual settings can be skipped.  
After completion of the above-described procedures in “Setting up” the manual setting modes  
can be entered by pressing and holding the SET key for 3 seconds. The following settings can  
now be programmed:  
FUNCTION KEYS  
The atomic clock has four easy to use keys:  
SET key  
:
To enter into the set mode for the following functions: time zone, DST ON/OFF  
(daylight saving time), language, hour, minute, year, month, day, weekday,  
12/24 hour, ºC or ºF temperature display  
Time zone setting  
DST ON/OFF  
Language display setting  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
915MHz RECEPTION CHECK FOR OUTDOOR TEMPERATURE SENSOR  
The atomic clock will receive the temperature data within 3 minutes. If the temperature data is not  
being received 3 minutes after setting up (the display shows “- - -”), then please check the  
following points:  
WWVB RADIO CONTROLLED TIME  
The NIST radio station, WWVB, is located in Ft. Collins, Colorado and transmits the exact time  
signal continuously throughout the United States at 60 kHz. The signal can be received up to  
2,000 miles away through the internal antenna in the atomic clock. However, due to the nature of  
the Earth’s Ionosphere, reception is very limited during daylight hours. The atomic clock will  
search for a signal every night when reception is best. The WWVB radio station derives its signal  
from the NIST atomic clock in Boulder, Colorado. A team of atomic physicists continually  
measures every second of every day to an accuracy of ten billionths of a second a day. These  
physicists have created an international standard, measuring a second as 9,192,631,770  
vibrations of a Cesium 133 atom in a vacuum. This atomic clock regulates the WWVB transmitter.  
1.  
The distance of the atomic clock or outdoor temperature sensor should be at least 6 feet (2  
meters) away from any interfering sources such as computer monitors or TV sets.  
Avoid placing the receiver onto or in the immediate proximity of metal window frames.  
Using other electrical products such as headphones or speakers operating on the same  
signal frequency (915MHz) may prevent correct signal transmission and reception.  
Neighbors using electrical devices operating on the 915MHz signal frequency can also  
cause interference.  
2.  
3.  
4.  
Once the outdoor temperature is displayed on the atomic clock, the WWVB tower icon in the clock  
display will start flashing in the top center of the LCD. This indicates that the clock has detected a  
radio signal and is trying to receive it. When the time code is received, the WWVB tower becomes  
permanently lit and the time will be displayed.  
Note:  
When the 915 MHz signal is received correctly, do not re-open the battery cover of either the  
outdoor temperature sensor or atomic clock, as the batteries may spring free from the contacts  
and force a false reset. Should this happen accidentally then reset all units (see Setting up  
above) otherwise transmission problems may occur.  
If the tower icon flashes, but does not set the time or the WWVB tower does not appear at all, then  
please take note of the following:  
The maximum transmission range is 330 feet (100 meters) from the outdoor temperature sensor  
to the atomic clock (in open space). However, this depends on the surrounding environment and  
interference levels. If no reception is possible despite the observation of these factors, all system  
units have to be reset (see Setting up).  
Recommended distance to any interfering sources like computer monitors or TV sets is a  
minimum of 6 feet (2 meters).  
Within ferro-concrete rooms (basements, superstructures), the received signal is naturally  
weakened. In extreme cases, please place the unit close to a window and/ or point its front  
or back towards the Fort Collins, Colorado, transmitter.  
During nighttime, the atmospheric disturbances are usually less severe and reception is  
possible in most cases. A single daily reception is adequate to keep the accuracy deviation  
below 1 second.  
CHANGING THE DISPLAY MODE (DAY, SECONDS, AND TEMPERATURES)  
There are 4 possible display modes to view the day, seconds, and temperatures.  
The month&date/weekday/indoor temperature/outdoor temperature is the default.  
To change the display:  
Note:  
1.  
2.  
3.  
4.  
Press the + key. The display should now show the month&date/weekday/seconds/outdoor  
temperature.  
Press the + key a second time and the display will show the month&date/weekday/indoor  
temperature/seconds.  
Press the + key a third time and the display will show the month&date/seconds/indoor  
temperature/outdoor temperature.  
Press the + key a fourth time and the display will return to the normal display.  
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting  
distance, etc.), the time can be manually set (please refer to notes on Manual time setting).  
MOON PHASE  
The Moon Phases and their corresponding dates appear in LCD 2. There are 12 visible Moon  
Phases that will show in the LCD 2:  
9
10  
FOLDOUT TABLE STANDS  
The foldout table stands are located on the backside. Pull the stands out from  
the bottom center edge of the atomic clock, below the battery compartment.  
Once the foldout table stands are extended, place the atomic clock in an  
appropriate location.  
New Moon Small Waxing Large Waxing First Quarter Small Waxing  
Crescent Crescent Gibbous  
Large Waxing  
Gibbous  
FullMoon  
Large Waning Small Waning Last Quarter Large Waning  
Gibbous Gibbous Crescent  
Small Waning  
Crescent  
POSITIONING  
WALL MOUNTING  
Before permanently mounting ensure that the atomic clock is able to receive WWVB signals from  
the desired location. Also, extreme and sudden changes in temperature will decrease the  
accuracy of the atomic clock, and changes in elevation will result with inaccurate temperatures  
readings for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before  
obtaining reliable data.  
1) Using a straightedge, horizontally space three screw positions on a wall.  
2) Install three mounting screws (not included) into a wall within transmission  
range—leaving approximately 3/16 of an inch (5mm) extended from the  
wall.  
3) Place the atomic clock onto the screws, using the hanging holes on the  
backside. Gently pull the atomic clock down to lock the screws into place.  
To achieve a true temperature reading, avoid mounting where direct sunlight can reach the  
outdoor temperature sensor. It is recommended to mount the outdoor temperature sensor on a  
North-facing wall or in any well shaded area. The maximum transmitting range is 330 feet (100  
meters) obstacles such as walls, concrete, and large metal objects can reduce the range.  
Note:  
Always ensure that the atomic clock locks onto the screws before releasing.  
Place both units in their desired location, and wait approximately 10 minutes before permanently  
mounting to ensure that there is proper reception. The outdoor temperature sensor is not  
waterproof and should not be placed anywhere it will become submerged in water or be directly in  
the rain.  
POSITIONING THE OUTDOOR TEMPERATURE SENSOR  
The remote temperature sensor can be mounted with the use of screws  
MOUNTING WITH SCREWS  
1)  
Remove the mounting bracket from the remote temperature  
sensor.  
Place the mounting bracket over the desired location.  
Through the three screw holes of the bracket, mark the  
mounting surface with a pencil.  
POSITIONING THE ATOMIC CLOCK:  
There are two possible ways to mount the atomic clock:  
2)  
3)  
use of the foldout table stands, or  
wall mounting  
4)  
5)  
Screw mounting bracket onto the mounting surface. Ensure  
that the screws are flush with the bracket.  
Insert the remote temperature sensor into the bracket.  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
MAINTENANCE AND CARE INSTRUCTIONS  
Extreme temperatures, vibration, and shock should be avoided to prevent damage to the  
units.  
Problem:  
Solution:  
Problem:  
Solution:  
The LCD is faint.  
1) Replace the batteries.  
No reception of WWVB signal  
1) It may help reception to face the front of the atomic clock in the general  
direction of Ft. Collins, Colorado.  
Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents;  
they may mark the displays and casings.  
Do not submerge in water.  
Immediately remove all low powered batteries to avoid leakage and damage.  
Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La  
Crosse Technology for repairs.  
2) Wait overnight for signal.  
3) Be sure the atomic clock is at least 6 feet (2 meters) from any electrical  
devices, i.e. TV sets, computers, or other radio controlled clocks.  
4) Remove batteries for five minutes, reinsert and leave the unit alone  
overnight without pressing any keys.  
Do not make any repairs to the units. Please return it to the original point of purchase.  
Opening and tampering with the units may invalidate the warranty.  
Problem:  
Solution:  
Problem:  
Solution:  
Hour is incorrect (minute and date are correct).  
SPECIFICATIONS:  
1) Be sure the correct time zone and daylight saving time are selected.  
"OF.L“ appears in the indoor temperature section of the LCD  
1) Move the atomic clock to an area with warmer or cooler surrounding  
temperature. Current surrounding temperatures are outside measuring  
range.  
Temperature measuring range  
Indoor  
:
14.1ºF to 100ºF with 0.2ºF resolution  
-9.9ºC to +37.8ºC with 0.1ºC resolution  
("OF.L" displayed if outside this range)  
-39.9ºF to +139.8ºF with 0.2ºF resolution  
-39.8ºC to +59.9ºC with 0.1ºC resolution  
("OF.L“ displayed if outside this range)  
Outdoor  
:
2) Change batteries.  
Problem:  
Solution:  
"--.-" appears in the outdoor temperature section of the LCD.  
1) Remove the batteries of both units for ten minutes, then reinsert them  
again. Make sure the batteries are new and fresh.  
2) Move the atomic clock closer to the sensor or place the sensor closer to  
the atomic clock. Make sure the clock is at a receivable range from the  
sensor.  
Temperature checking interval  
Indoor  
Outdoor  
Transmission distance : maximum 330 feet (100 meters) in open field  
Power source (Alkaline batteries recommended)  
:
:
every 20 seconds  
every 4 seconds  
3) Move the units to another location. Interferences from other electrical  
devices operating on the same signal frequency (915MHz) may prevent  
correct signal transmission and reception.  
Atomic clock  
Sensor  
Battery life  
:
:
:
2 x AA, 1.5V batteries  
2 x AA, 1.5V batteries  
about 24 months  
Problem:  
Solution:  
"OF.L“ appears in the outdoor temperature section of the LCD.  
1) Wait until the current surrounding temperature cools down or increases.  
Current temperature is outside of the measuring range of the sensor. The  
outdoor temperature will be displayed again once the current surrounding  
temperature is within the range of the sensor.  
Dimensions (L x W x H)  
Atomic clock  
Sensor  
:
:
10.25“ x 1.16“ x 9.74“ / 260.6 x 29.5 x 247.5mm  
5.05” x 1.50” x 0.83” / 128.3 x 38.2 x 21.2 mm  
WARRANTY INFORMATION  
La Crosse Technology, Ltd provides a 1-year limited warranty on this product against  
manufacturing defects in materials and workmanship.  
2) Change Batteries  
3) Please see all basic troubleshooting info as well  
13  
14  
This limited warranty begins on the original date of purchase, is valid only on products purchased  
and used in North America and only to the original purchaser of this product. To receive warranty  
service, the purchaser must contact La Crosse Technology, Ltd for problem determination and  
service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd  
authorized service center. The original dated bill of sale must be presented upon request as proof  
of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service  
center.  
FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. THIS PRODUCT IS NOT A TOY.  
KEEP OUT OF CHILDREN’S REACH.  
This warranty gives you specific legal rights. You may also have other rights specific to your  
State. Some States do no allow the exclusion of consequential or incidental damages therefore  
the above exclusion of limitation may not apply to you.  
For warranty work, technical support, or information contact:  
La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as  
stipulated herein, with new or reconditioned parts or products if found to be defective during the  
limited warranty period specified above. All replaced parts and products become the property of  
La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement  
parts and products assume the remaining original warranty, or ninety (90) days, whichever is  
longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs  
covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is  
examined which is not in need or repair, you will be charged for the repairs or examination.  
La Crosse Technology  
2809 Losey Blvd. S.  
La Crosse, WI 54601  
Phone: 608.782.1610  
Fax: 608.796.1020  
e-mail:  
(warranty work)  
The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd  
product to a La Crosse Technology, Ltd authorized service center. La Crosse Technology, Ltd will  
pay ground return shipping charges to the owner of the product to a USA address only.  
(information on other products)  
Your La Crosse Technology, Ltd warranty covers all defects in material and workmanship with the  
following specified exceptions: (1) damage caused by accident, unreasonable use or neglect  
(including the lack of reasonable and necessary maintenance); (2) damage occurring during  
shipment (claims must be presented to the carrier); (3) damage to, or deterioration of, any  
accessory or decorative surface; (4) damage resulting from failure to follow instructions contained  
in your owner’s manual; (5) damage resulting from the performance of repairs or alterations by  
someone other than an authorized La Crosse Technology, Ltd authorized service center; (6) units  
used for other than home use (7) applications and uses that this product was not intended or (8)  
the products inability to receive a signal due to any source of interference.. This warranty covers  
only actual defects within the product itself, and does not cover the cost of installation or removal  
from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the  
seller or performance variations resulting from installation-related circumstances.  
web:  
Questions? Instructions? Please visit:  
All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or  
duplicated or processed using electronic, mechanical or chemical procedures without written  
permission of the publisher.  
This handbook may contain mistakes and printing errors. The information in this handbook is  
regularly checked and corrections made in the next issue. We accept no liability for technical  
mistakes or printing errors, or their consequences.  
All trademarks and patents are acknowledged.  
LA CROSSE TECHNOLOGY, LTD WILL NOT ASSUME LIABILITY FOR INCIDENTAL,  
CONSEQUENTIAL, PUNITIVE, OR OTHER SIMILAR DAMAGES ASSOCIATED WITH THE  
OPERATION OR MALFUNCTION OF THIS PRODUCT. THIS PRODUCT IS NOT TO BE USED  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Plumbing Product 10501173 User Manual
LG Electronics DVD Player DVX550 User Manual
Linak Automobile Parts HB12 User Manual
Listen Technologies Satellite Radio LR 500 User Manual
Little Wonder Chainsaw 1910 User Manual
Makita Cordless Drill 6093D User Manual
Makita Cordless Saw 5007MG User Manual
Maytag Washer 40136001 User Manual
Melissa Food Warmer 650 007 User Manual
Mentor All in One Printer v86_4 User Manual