• For application in small and
mid-sized systems
• Analogue ringbus technology with
unshielded detector cabling
• Addressable conventional technology
• Menu-driven operation
• Easy commissioning through
AUTO setup
• 32–bit multiprocessor system
• EN 54/VdS-certified
Fire is a permanent threat to life and property. There- ted within LST premises, thus guaranteeing flexible and
fore, immediate response to a fire is imperative. The reliable individual solutions.
main objective of the fire detection control panel Series
BC216 is to alarm and to react in time and, conse- Using a 32-bit multiprocessor system, the fire detection
quently, save lives and protect property. For decades control panel Series BC216 ensures topmost efficiency
LST have focused their aims to undertaking unrivaled and speed – prerequisites for saving lives and minimi-
efforts in order to realize new innovations in the security zing damage to property.
area. Research, development and production are loca-
Description
The fire detection control panel BC216-1 is designed as detector zones. Addressable conventional technology
a modular system. According to your system‘s concept allows for the connection of automatic and non-auto-
and size, it can be expanded individually.
matic fire detectors as well as the unambiguous iden-
tification of the activated detector in the event of an
The control panel provides two slots for the connection alarm.
of function modules (Conventional Detector Interface
GIF8-1 or Loop Interface LIF64-1) to which a maximum Depending on the respective system, a Fire Brigade In-
of 16 detector lines in addressable conventional techno- terface FWI2-1, a Fire Brigade Interface Additional Board
logy or a maximum of two ADM loops or a combination FWZ2-1, an LED-Display Field LAB48 as well as further
of the both can be connected. In this way, you obtain optional componentries can be installed in addition.
the highest degree of flexibility for virtually any task.
Easy parameterisation on the control panel‘s display
The ADM loop principle offers intelligent analogue ring- and operating unit, via a PC keyboard, or by means of
bus technology with bi-directional data transfer. Each a PC software enables you to tailor the control panel to
loop provides for the software-aided administration of your individual requirements.
up to 198 physical address points in a maximum of 128
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-1_DBL_LST_EN_0804.PDF • PAGE 1
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Permanent Connection
A variety of peripheral devices can be connected to the
fire detection control panel BC216-1:
• Fire brigade key safe
• Transmitting device for the actuation of pagers via
ESPA protocol
• Modules for remote parameterisation and remote
maintenance via computer newtork, modem or GSM
connection
• Transmitter module for the transmission of messages
via SMS or e-mail
– and much more.
• Fire brigade control unit
• Acoustic and optical signaling devices
• External protocol printer
• Remote display and operating panels
• Remote indication unit
• Actuations
• Electronic monitoring system
Network Expansion
By upgrading the control panel, the BC216-1 can be expanded nearly without limitation, according to future
integrated into a Global Security System network demands.
(GSSnet): the BCnet216 is a comprehensive control
panel network that is made up of sectional control pa- The maximum size of a BCnet216 comprises 127 net-
nels Series BC216 and works as an entity beyond the work members, 9700 detector zones, 9700 actuati-
boundaries of the individual loops and sectional control ons, 999 alarming devices as well as 99 transmitting
panels. The system is designed modularly and can be devices.
Extinguishing Control System
If required, the BC216-1 can be easily expanded to integrated into the fire detection control panel BC216-1,
an extinguishing control panel LC216-1 according to a combined operation is therefore possible.
EN 12094-1. The panel can control up to 8 flooding The LC216-1 is certified to EN 54-2, EN 54-4,
zones in one extinguishing system, without hardware EN 12094-1 and VdS as a pure extinguishing control
redundancy.
panel and as a combined fire detection and extinguis-
The function of the extinguishing control panel is fully hing control panel.
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-1_DBL_LST_EN_0804.PDF • PAGE 3
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Mains voltage
230VAC +10/-15%, 50Hz
60VA
Connection power
Output voltage
typ. 28VDC
Output peak current
Connection of external devices
Own current consumption at 24V
Ambient temperature
Dimensions W × H × D
Colour
max. 1.8A
typ. 0.8A, site-specific
typ. 90mA (without optional componentries)
-5°C to +50°C
420 × 520 × 120 (mm)
gray-white, RAL 9002
approx. 6kg
Weight without accumulator
Approvals (EN 54-2, EN 54-4)
VdS G201017
FT 14/147/3/99 (Austria),
Order name
Fire Detection Control Panel BC216-1
Building Safety. Building Security.
A
© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
BC216-1_DBL_LST_EN_0804.PDF • PAGE 4
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
Download from Www.Somanuals.com. All Manuals Search And Download.
|