SECURITY CAMERA
INSTRUCTION MANUAL
ENGLISH VERSION 1.0
LBC5451
www.lorextechnology.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
• 1x Camera and mounting stand
• 1x Power adapter
• 1x Mounting kit
• 1x Allen key
• 1x Screw cap
• 1x 60 ft. (18m) BNC / power extension cable
• 1x BNC Female / RCA Male adapter
• 1x Instruction Manual
CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE
RECEIVED ALL THE COMPONENTS SHOWN ABOVE.
Features
• High resolution Sony Super HAD™ image sensor delivers
540TV lines of resolution.
• Dual infrared / white-light LEDs provide full-color night
vision in complete darkness for long-range monitoring and
close-up recognition.
• Capable of capturing images up to 60 ft. (18m) away in total
darkness in B/W and 30 ft. (9m) in color*.
• 4.3mm wide-angle lens for wide area coverage (80° FOV)†.
• IP67 rated housing for indoor / outdoor installations‡.
* Illumination range under ideal conditions. Objects at or beyond this range may
be partially or completely obscured, depending on the camera application. Color
night vision only available once motion triggers white light LEDs to turn on.
† Field of view, diagonal.
‡ Not intended for submersion in water. Installation in a sheltered location recom-
mended.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions
• Read this guide carefully and keep it for future reference.
•Followallinstructionsforsafeuseoftheproductandhandle
with care.
• Use the camera within given temperature, humidity, and
voltage levels noted in the Technical Specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source
of intense light.
• Use only the supplied regulated power supply. Use of a
non-regulated, non-conforming power supply can damage
this product and voids the warranty.
• Periodic cleaning may be required. Use a damp cloth only.
Do not use harsh cleaners or aerosol cleaners.
• The supplied extension cable is rated for surface mounting
only. Cablesforin-wall/floor-to-floorinstallationsaresold
separately.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
1. CAMERA OVERVIEW
1 Camera Module
1
2 Camera Holder
2
3 Camera Mount
4 Mounting Base
3
5 DC Power / BNC Video
Connectors: See
4
on page 12 for details.
6 Infrared LEDs: Enable the
5
camera to see at night.
7 White Light LEDs:
Automatically turn on
when motion is detected
6
(during night vision only)
to deter criminals and
allow camera to view color
7
8
images at night
9
8 Camera Lens
9 Sensor: Detects light to
control night vision and
trigger White Light LEDs.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Night Vision Features
2. NIGHT VISION FEATURES
This camera is equipped with special features that make it
more effective at deterring and identifying nighttime
intruders.
2.1 Night Vision
This camera is equipped with IR (Infrared) LEDs, which
allow it to see at night up to a range of 60 ft. (18m). It has a
built-in light sensor that activates night vision when it is
dark. The camera sees in black and white when night
vision is on.
2.2 Motion Detection / White Light LEDs
This camera is also equipped with White Light LEDs. At
night, the White Light LEDs are set to turn on
automatically when the camera detects motion within a
range of 9 ft. (3m).
How it Works: During nighttime, the camera’s night vision sees up to 60 ft. in black and white. When
an object comes within a 9 ft. range, the White Light LEDs turn on, and the Infrared LEDs turn off. White
light projects up to 30 ft., allowing the camera to view close by objects in color (depending on lighting
conditions). After 15 seconds, the White Light LEDs turn off, and the Infrared LEDs turn back on.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Night Vision Features
This helps deter / identify intruders by:
• Alerting them to the presence of the camera, after they
have already been spotted.
• Providing a better view of the intruder’s face. The white
lightsonthecameraturnoninstantlytosurpriseintruders,
drawing their eyes to the camera.
White Light LEDs draw
attention to help identify faces
Typical night-vision cameras
maybeoverlookedbyintruders
• Providing color images at night. When the white lights are
activated, the camera can view close by objects in color.
Color images help identify the intruder’s face and clothing.
NOTE: White Light LEDs remain on for 15 seconds after
the camera detects motion.
The camera detects motion using a built-in
light sensor. Avoid installing the camera in
areas where the lighting conditions are likely
to change frequently, as lighting changes may
trigger the sensor even if there is no motion.
IMPORTANT:
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Tips
3. INSTALLATION TIPS
• Test the camera before installing to ensure that there are
no problems with the camera.
• To maximize the range of the motion sensor and White
Light LEDs, mount the camera around 7 ft. (2.2m) off the
ground.
• Avoid installing the camera in locations overlooking a
publicroadorsidewalk,asmotionorlightingchangesfrom
these locations will trigger the camera’s White Light LEDs.
• Mount the camera where the lenses are away from direct
and intense sunlight.
• Plan your cable wiring so that it does not interfere with
power lines or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Tips
• Adjust the camera angle so that it provides a satisfactory
view of the area you would like to monitor.
• In "high-risk" locations, have multiple cameras point in
the same area. This provides camera redundancy if a
camera malfunctions, or if a vandal attempts to damage
the camera.
• Mount the camera in an area that is visible but out of reach.
3.1 Suggested Install Locations
This camera is ideal for entrances and other areas where
intruders are likely to come in close proximity to the
camera.
Good locations to install the camera are:
• Home entrance.
• Office / warehouse entrance.
• Stairwells.
• Hallways.
Avoid installing the camera:
• Overlooking a road, street, sidewalk, or other location
where normal nighttime traffic is likely to trigger the
motion sensor.
• In a location where people or objects are unlikely to come
within 9 ft. (3m) of the camera (for example, mounted to a
high ceiling in a warehouse).
• Where lighting conditions change frequently.
• In a location that is lit at night (such as a parking lot), as
existing lighting may prevent the camera from turning on
night vision.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Camera
4. INSTALLING THE CAMERA
4.1 Before Installing the Camera
Decide if you are going to run the cables through the wall /
ceiling (drilling required) or along the wall / ceiling.
• If you are running the cables through the wall / ceiling,
connect the power and BNC video cables to the camera
for details.
• If you are running the cables along the wall / ceiling, follow
the instructions below before connecting the camera
power and BNC video cables.
4.2 To Install the Camera
1 Use the included allen key to loosen the base screws
(Figure 1). Twist the mounting base until it loosens; then,
separate the camera from the mounting base.
Figure 1:
Figure 2:
Camera
Mounting
base
Twist the base until
it loosens; then,
pull to separate.
Base screws
(1 on each side)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Camera
2 Run the cable through the base (Figure 3) and secure it by
pushing the rubber bumper on the cable through the slot on
the base (Figure 4). This prevents the camera from falling
during installation.
• If you are running the cables along the wall / ceiling, make
sure to run the cable through the cable notch on the base.
This will keep the camera base flush to the wall / ceiling
when mounted.
Figure 3:
Figure 4:
Bumper
Slot
Cable
notch
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Camera
3 Mount the base to the
desired surface using
the included screws.
NOTE: If mounting to
drywall, use the
included
drywall plugs.
NOTE: Camera hangs down from base
during mounting.
4 Attach the camera to
the base. Align the base
screws with the slots on
the base, slide the camera
onto the base, and twist.
Base slot
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Camera
5 Adjust the camera position as
needed (see “Positioning” on
page 10 for details).
NOTE: Ensure that the sensor is
directly below the camera
lens (in the 6 o‘clock
position) or the image will
appear rotated.
Correct sensor
position
6 Tighten the screws to secure the
camera in position and snap the
screw cap over the arm screw.
Arm screw
Base
screws
Screw cap
Lens screws
Do not over-tighten the screws, as
this may crack the camera or base.
7 If you are running the cables along the wall / ceiling,
connect the camera power and BNC video cables. See
“Connecting the Camera” on page 12 for details.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning
5. POSITIONING
The camera offers flexible positioning, allowing you to
manually adjust the camera for wall or ceiling installation.
NOTE: To maximize the range of the motion sensor and
White Light LEDs, it is recommended to mount the
camera around 7 ft. (2.2m) off the ground.
Tilt the camera toadjustthe angle.
Loosen the screws on both sides of
the base and twist the camera to
adjust the camera direction.
Do not over-tighten the
screws, as this may crack
the camera or base.
Base screws
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning
Loosen the screws on both sides of the
camera module and twist to adjust the
sensor position.
The camera module can only
twist one full rotation in
either direction. Do not force
thelens,asthiscanbreakthe
camera.
Cameramodule
screws
Make sure that the sensor is directly
below the camera lens (in the 6 o‘clock
position). Otherwise, the image will
appear rotated.
Correct sensor
position
Do not over-tighten the
screws, as this may crack
the camera or base.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera
6. CONNECTING THE CAMERA
1
2
BNC extension cable
BNC connector
Male power
Female power
To Camera:
To Monitor / DVR:
1 Connect the male power connector on the BNC extension
cable with the female power connector on the camera.
• Connect the BNC connector on the extension cable to the
camera.
2 Connect the female power connector on the extension cable
to the power adapter.
• Connect the BNC connector on the extension cable to your
monitor or DVR.
3 Plug the power adapter into a power outlet.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera
6.1 BNC to RCA Adapter (Optional)
DVR / CCTV MONITOR
Video IN
TV / VCR
Video IN
BNC to RCA Adapter
Attach the included BNC to RCA adapter to connect the
extension cable to RCA inputs (i.e. for a TV connection).
6.2 Setup Diagram
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
7. TECHNICAL SPECIFICATIONS
Image Sensor
Video Format
Effective Pixels
Resolution
1/3" Sony Super HAD™ II
NTSC
H:768 V:494
540 TV Lines
2:1 Interlace
Internal
Scan System
Sync System
S / N Ratio
48 dB (AGC OFF)
AES
Iris
AES Shutter Speed
Min. Illumination
NTSC: (1/60~1/100,000 sec.)
0.2 Lux without IR LED
0 Lux with IR LED
Video Output
Composite 1.0Vpp @ 75ohm
4.3mm F2.0 / Fixed
80°
Lens / Lens Type
FOV (Diagonal)
Termination
BNC Type
IR LED Qty / Type
12 pcs. / 850nm
60 ft. / 18m
1
Night Vision Range
White Light LED Qty
8 pcs.
Motion Detection Range 9 ft. / 3m
White Light Range 30 ft. / 9m
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
Power Requirement
Power Consumption
Operating Temp. Range
12V DC 10%
Max. 300mA (w/White Light LEDs)
14° ~ 122° F / -10 ~ 50° C
< 80% RH
Operating Humidity
Range
2
IP 67
Environmental Rating
Weight (including stand) 0.75 lbs. / 0.34kg
1. IR Illumination Range under ideal conditions. Objects at or
beyond this range may be partially or completely obscured,
depending on the camera application.
2. Not intended for submersion in water. Installation in a sheltered
location recommended.
7.1 Dimensions
92 mm / 3.6"
74 mm / 2.9"
122.5 mm / 4.8"
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable Extension Options
8. CABLE EXTENSION OPTIONS
You can extend the cable run for your camera up to 300 ft.
depending on the cable type used. See table below:
Option
Cable Type
Max Cable
Run Distance Extensions
Max. # of
1
2
Regular BNC
(supplied with camera)
180 ft. / 55m 3
'RG59' or 'Coax' or
'Coaxial' BNC (sold
separately)
300 ft. / 92m 5
300 ft. / 92m 3
3
Lorex Universal Cable
(sold separately)
Notes:
1 For optimal performance, consider using option 2 or 3. It is
best to use the same cable type for the entire distance.
2 Cable run recommendation based on typical camera power
consumption (up to 500mA). For specialty cameras with
higher current consumption, maximum cable run may be
reduced. Consider providing power to the camera at the
camera side, rather then at the end of the extension cable.
3 Indicators that your cable run may be too long:
• Video is permanently black & white (even during day time).
• Video is distorted.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
9. TROUBLESHOOTING
Problem
Solution
No Picture / Signal •Ensure your TV is on the correct input
channel. Common terms of an input
channel: INPUT, AV CHANNEL, LINE1,
LINE2, AUX.
•If your camera is connected to a VCR /
DVR, ensure it is properly connected to
your TV / Monitor.
•Ensure connections are properly
connected.
•Ensure the camera power supply is
plugged in.
Picture is too bright •Ensure your camera isn’t pointed
directly at a source of light (e.g. sun or
spot light).
•Move your camera to a different
location.
Picture is too dark
•Check the brightness and contrast
settings of the device your camera
connects to (TV / Monitor / DVR).
Picture is rotated
sideways or upside
down
•Rotate the camera module to ensure
that the sensor is directly below the
camera lens (at the 6 o‘clock position).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Solution
Picture is not clear •Check the camera lens for dust, dirt,
and spiderwebs. Clean the lens with a
soft, clean cloth.
•Make sure that the cable run is within
the limitations specified in the section
'Cable Extension Options'.
Night vision is not
working
•The night vision activates when light
levels drop. The area may have too
much light.
White Light LEDs
do not turn on
•Motion detection range is limited to
9 ft. (3m). It is recommended to install
the camera at a height of about
7 ft. (2.2m) to ensure that people and
objects will be detected.
White Light LEDs
turn on too
frequently
•Move the camera to a different location
where normal nighttime traffic will not
trigger the motion detection.
•Changes in lighting conditions may
trigger the motion sensor. Adjust the
camera angle down to reduce exposure
to light, or move the camera to a
different location.
Bright spot in video •Night vision reflects when pointing a
when viewing
camera at night
camera to a window. Move the camera
to a different location.
BNC connection
does not connect to
my TV
•Use a BNC to RCA adapter at the end
of the extension cable.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
LBC5451
Version 1.0
www.lorextechnology.com
DownloadCfroompyWrwigwh.Stom©an2u0a1ls1.coLmo.rAellxMTaencuahlsnSoelaorgchyAInndcD.ownload.
|