LG Electronics Speaker System HTW316 User Manual

DVD HOME CINEMA

WIRELESS SPEAKER

SYSTEM

OWNER’S MANUAL

MODEL: LGHTW316

(Speakers: FE-6100TE, FE-6100CVE, FE-6100WE,

ACC-W6100, FA-W6100SL, FA-W6100SR)

CD-R/RW

Before connecting up, operating or repairing this product,

please read this instruction booklet carefully and

completely.

P/N: 3828R-D037U

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANU-

AL AND THOSE MARKED ON THE UNIT. RETAIN THIS MANUAL FOR FUTURE REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock

or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for

installation, use, and servicing.

This unit does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.

1. Read these instructions. - All these safety and

operating instructions should be read before the

product is operated.

10. Protect the power cord from being walked on or

pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

2. Keep these instructions. - The safety, operating

and use instructions should be retained for future

reference.

11. Only use attachments/accessories specified by

the manufacturer.

3. Heed all warnings. - All warnings on the product

and in the operating instructions should be adhered

to.

4. Follow all instructions. - All operating and use

instructions should be followed.

5. Do not use this apparatus near water. – For

example: near a bath tub, wash bowl, kitchen sink,

laundry tub, in a wet basement; or near a swimming

pool; and like.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

6. Clean only with dry cloth. – Unplug this product

from the wall outlet before cleaning. Do not use

liquid cleaners.

13. Unplug this apparatus during lightning storms

or when unused for long periods of time.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions. -

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over- heating.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-

supply cord or plug is damaged, liquid has

been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or

has been dropped.

The openings should never be blocked by placing

the product on a bed, sofa, rug or other similar

surface. This product should not be placed in a

built-in installation such as a bookcase or rack

unless proper ventilation is provided or the

manufacturer’s instructions have been adhered to.

8. Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9. Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A ground-

ing type plug has two blades and a third ground-

ing prong. The wide blade or the third prong are

provided for your safety. If the provided plug

does not fit into your outlet, consult an electri-

cian for replacement of the obsolete outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

DVD Audio Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ꢀ Changing GROUPs . . . . . . . . . . . . . . . . . . . 26

ꢀ Changing PAGEs. . . . . . . . . . . . . . . . . . . . . 26

Audio CD and MP3/WMA Disc Operation . . . . 27-28

Playing an Audio CD or MP3/WMA Discs . . . . . 27

Notes on MP3/WMA Recordings . . . . . . . . . . . . 27

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Changing Tracks . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Repeat Track/All/Off. . . . . . . . . . . . . . . . . . . 28

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 28

ꢀ Changing Audio Channels . . . . . . . . . . . . . . 28

JPEG File Operation . . . . . . . . . . . . . . . . . . . . . . . 29

Viewing JPEG Files . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Moving to another File . . . . . . . . . . . . . . . . . 29

ꢀ Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . 29

ꢀ Flipping the Picture . . . . . . . . . . . . . . . . . . . 29

ꢀ Rotating the Picture . . . . . . . . . . . . . . . . . . . 29

ꢀ Notes on JPEG Files . . . . . . . . . . . . . . . . . . 29

Programmed Playback . . . . . . . . . . . . . . . . . . . . . 30

Audio CD and MP3/WMA Disc Programmed

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Additional Information . . . . . . . . . . . . . . . . . . . . . 31

Last Condition Memory . . . . . . . . . . . . . . . . . . . 31

Radio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Presetting Radio Stations. . . . . . . . . . . . . . . . . . 32

Listening to the Radio . . . . . . . . . . . . . . . . . . . . 32

Other Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Sleep Timer Setup . . . . . . . . . . . . . . . . . . . . . . . 33

Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Using Headphones . . . . . . . . . . . . . . . . . . . . . . 33

Selcting Input Source. . . . . . . . . . . . . . . . . . . . . 33

Introduction

Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . 3

Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Playable Discs. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Notes about Discs . . . . . . . . . . . . . . . . . . . . . . . . 6

About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Front Panel Controls/ Display Window Indicators . 7

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Rear Panel Connections . . . . . . . . . . . . . . . . . . . . . 9

Installation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-16

TV Connections . . . . . . . . . . . . . . . . . . . . . . . . . 10

Optional Equipment Connections . . . . . . . . . . . . 11

AM-FM Antenna Connections. . . . . . . . . . . . . . . 12

Assembling the Front Speaker . . . . . . . . . . . . . . 13

Assembling the Wireless Speaker . . . . . . . . . . . 13

Setting the Wireless Speaker Channel . . . . . . . . 13

Speaker System Connections . . . . . . . . . . . . 14-15

Speaker Placement . . . . . . . . . . . . . . . . . . . . . . 16

Pre-operation . . . . . . . . . . . . . . . . . . . . . . . . . . 17-22

Mini Glossary for Audio Stream & Surround Mode . 17

Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

DVD/CD Receiver Overview. . . . . . . . . . . . . . . . 18

On-Screen Displays . . . . . . . . . . . . . . . . . . . 18-19

Initial Setup. . . . . . . . . . . . . . . . . . . . . . . . . . 20-22

ꢀ nitial Setup and Operation Overview . . . . . . 20

ꢀ Language . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ Picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

ꢀ Speaker Setup. . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

ꢀ Parental Control. . . . . . . . . . . . . . . . . . . . . . 22

Reference

Operation

Language Code List . . . . . . . . . . . . . . . . . . . . . . . 34

Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . 35

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 36-37

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . 23-26

DVD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 23

General Features. . . . . . . . . . . . . . . . . . . . . . . . 23

ꢀ Changing TITLE/GROUP. . . . . . . . . . . . . . . 23

ꢀ Changing CHAPTER/TRACK. . . . . . . . . . . . 23

ꢀ Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ꢀ Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ꢀ Still Picture and Frame-by-Frame Playback . 24

ꢀ Slow Motion. . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ Time Search . . . . . . . . . . . . . . . . . . . . . . . . 24

ꢀ 3D Surround . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Zoom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Marker Search. . . . . . . . . . . . . . . . . . . . . . . 25

Special DVD Features . . . . . . . . . . . . . . . . . . . . 25

ꢀ Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Camera Angles . . . . . . . . . . . . . . . . . . . . . . 25

ꢀ Changing the Audio Language. . . . . . . . . . . 25

ꢀ Changing the Audio Channel . . . . . . . . . . . . 25

ꢀ Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

About the symbols for instructions

Indicates hazards likely to cause harm to the unit

itself or other material damage.

Indicates special operating features of this unit.

Indicates tips and hints for making the task easier.

Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic”, and the double-D symbol are trademarks of Dolby

Manufactured under license from Digital Theater Systems, Inc.

US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and

other worldwide patents issued and pending. “DTS” and “DTS

Digital Surround” are registered trademarks of Digital Theater

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Disc-related terms

Title (DVD video discs only)

Playable Discs

The main film content, accompanying feature content,

additional feature content, or music album.

Each title is assigned a title reference number enabling

you to locate it easily.

DVD video discs

(8 cm / 12 cm disc)

DVD audio discs

(8 cm / 12 cm disc)

Chapter (DVD video discs only)

Audio CD

Sections of a picture or a musical piece that are smaller

than titles. A title can be composed of only one or

several chapters. Each chapter is assigned a chapter

number, enabling you to locate the chapter you want.

Depending on the disc, chapters may not be recorded.

(8 cm / 12 cm disc)

In addition, this unit can play a DVD-RW, DVD+RW,

Kodak PICTURE CD, CD-R or CD-RW that contains

audio titles, MP3, WMA, or JPEG files.

Group (DVD audio discs only)

otes

The main audio contents, accompanying feature

content, additional feature content, or music album.

Each group is assigned a group reference number

enabling you to locate it easily.

– Depending on the conditions of the recording equip-

ment or the CD-R/RW (or DVD-RW, DVD+RW) disc

itself, some CD-R/RW (or DVD-RW, DVD+RW) discs

cannot be played on the unit.

– Do not attach any seal or label to either side (the

labeled side or the recorded side) of a disc.

Track (DVD audio discs and audio CD only)

Sections of a picture or a musical piece on an audio

CD. Each track is assigned a track number, enabling

you to locate the track you want.

–

Do not use irregularly shaped CDs (e.g., heart-shaped

or octagonal). It may result in malfunctions.

otes on DVDs

Some playback operations for DVDs may be intentional-

ly fixed by the software manufacturer. As this unit plays

DVDs according to disc content designed by the soft-

ware manufacturer, some playback features of the unit

may not be available or other functions may be added.

Make sure to also refer to the instructions supplied with

the DVDs. Some DVDs made for business purposes

may not be able to be played on the unit.

Regional code of the DVD/CD receiver and DVDs

This DVD/CD receiver is designed and manufactured for

playback of region “1” encoded DVD software. The

region code on the labels of some DVDs indicates which

type of player can play those discs. This unit can only

play DVDs labelled “1” or “ALL”. If you try to play any

other discs, the message “Check Regional

Code” will appear on the TV screen. Some

DVDs that have no region code label may still

be subject to area restrictions and therefore not

playable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use (Continued)

Precautions

Storing discs

After playing, store the disc in its case.

Handling the unit

Do not expose the disc to direct sunlight or sources of

heat, or leave it in a parked car exposed to direct sun-

light, as there may be a considerable temperature

increase inside the car.

Shipping the unit

Use the original shipping carton and packing materials

may come in handy. For maximum protection, re-pack

the unit as it was originally packed at the factory.

Cleaning discs

Setting up the unit

Fingerprints and dust on the disc can distort the picture

or reduce sound quality. Before playing, clean the disc

with a clean cloth. Wipe the disc from the centre out-

wards.

The picture and sound of a nearby TV, VCR, or radio

may be affected during DVD playback. In this case,

position the unit away from the TV, VCR, or radio, or

remove the disc and turn off the unit.

Keeping the exterior surfaces clean

Do not use volatile liquids, such as insecticide spray,

near the unit. Do not leave rubber or plastic products in

contact with the unit for a long period of time. They will

leave marks on the surface.

YES

Cleaning the unit

Do not use strong solvents such as alcohol, benzene,

thinner, commercially available cleaners, or anti-static

spray intended for vinyl records.

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty,

use a soft cloth lightly moistened with a mild detergent

solution. Do not use strong solvents such as alcohol,

benzene, or thinner, as these might damage the surface

of the unit.

About Symbols

About the

symbol display

To obtain a clear picture

The DVD/CD receiver is a high-tech, precision device. If

the optical pick-up lens and disc drive parts are dirty or

worn, the picture quality will be poor.

Regular inspection and maintenance are recommended

after every 1,000 hours of use. (This depends on the

operating environment.)

“

” may appear on the TV screen during operation.

This icon means the function explained in this owner’s

manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is

applicable only to the disc represented by the symbol.

For details, please contact your nearest dealer.

DVD-V DVD Video discs

Notes on Discs

DVD-A DVD Audio discs

Disc Handling

Audio CDs.

MP3 MP3 disc.

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not

get on the surface.

WMA disc.

WMA

JPEG

JPEG files on a disc.

Do not stick paper or tape on the disc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Controls/ Display Window Indicators

STANDBY/ON

STANDBY indicator

OPEN/CLOSE button

PLAY/FUNCTION button

Lights red when the receiver

is in Standby mode (off).

PAUSE/MONO/STEREO

button

STOP/MEMORY button

DISC Tray

TUNING (-/+)/

SKIP/SCAN

buttons

FUNC. (

)

MONO/ST.

PAUSE

MEMORY

STOP

TUNING

PLAY(

)

OPEN/CLOSE

VOLUME

STANDBY/ON

PHONES

DISPLAY Window

Remote sensor

VOLUME Sound control

PHONES Headphones connector

TUNED indicator

MUTE indicator

Repeat playback

mode indicators

Indicates current

surround mode

STEREO

indicator

Programmed

playback active

Indicates current

audio stream

SLEEP

indicator

Indicates current

player function:

Playback, Pause, etc.

dts

REPEAT ALL

CHP/TRK

TUNED STEREO

MUTE

DIGITAL

PL II

PROGRAM

SLEEP

PCM

TITLE

DVD

MP3

ANGLE active

DVD DVD video or DVD

Indicates current

chapter or track

number

audio disc loaded

Audio CD loaded

Total playing time/Elapsed time/

Frequency/Sleep time/Surround

mode/Volume etc. indicators

MP3 MP3 or WMA disc

Indicates current

title number

loaded

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control Buttons

OPEN/CLOSE

BAND

POWER

AUX

CD/DVD

DIMMER

MUTE

SLEEP

NUMBER

REPEAT A-B

REPEAT

SOUND MODE

PL II

PROGRAM

PRO LOGIC II

CLEAR

AUDIO

PRESET(+/-)

VOLUME (+/-)

SUBTITLE

RETURN

ZOOM

ENTER

ARROW

For use in highlighting a selection

on a GUI menu screen, TITLE and

MENU screen.

DISPLAY

STOP

MENU Use the MENU button to

display the menu screen included

on DVD video discs.

PAUSE/STEP

PLAY

SKIP/SCAN (

Press and hold button for about

two seconds for search function.

)

SETUP

TITLE

Use the TITLE button to

display the title screen included

on DVD video discs.

ANGLE

SLOW SCAN (

)

MARKER

Remote Control Operation Range

Remote Control Battery Installation

Point the remote control at the remote sensor and press

the buttons.

Remove the battery cover on the rear

of the remote control, and insert two

^ꢀDistance: About 23 ft (7 m) from the front of the

remote sensor

^ꢀAngle: About 30° in each direction in front of the remote

sensor

R03 (size AAA) batteries with

aligned correctly.

and

Caution

Do not mix old and new batteries. Never mix different

types of batteries (standard, alkaline, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

Rear Panel Connections

POWER CORD

SUBWOOFER LINE OUT Jack

VIDEO 2 (Input) Jacks

SPEAKER Terminals

VIDEO 1 (Input/Output) Jacks

OPTICAL IN Jack

OPTICAL OUT Jack

GROUND CABLE

Jack

MONITOR OUT Jack

FM Antenna Terminals

AM Antenna Terminals

S-VIDEO OUT Jack

COMPONENTVIDEO OUT (Y Pb Pr) Jacks

Connect to a TV with Y Pb Pr inputs.

Do not touch the inner pins of the jacks on the rear

panel. Electrostatic discharge may cause permanent

damage to the unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

TV Connections

^ꢀMake one of the following connections, depending on

the capabilities of your existing equipment.

Progressive Scan (ColorStream pro) connection

^ꢀIf your television is a high-definition or “digital ready”

television, you may take advantage of the DVD

Player’s progressive scan output for the highest

video resolution possible.

^ꢀIf your TV does not accept the Progressive Scan for-

mat, the picture will appear scrambled if you try

ips

^ꢀDepending on your TV and other equipment you wish

to connect, there are various ways you could connect

the DVD/CD receiver. Use one of the connections

described below.

Progressive Scan on the DVD/CD receiver

^ꢀPlease refer to the manuals of your TV, VCR, Stereo

System or other devices as necessary to make the

best connections.

Connect the COMPONENT VIDEO OUT jacks from

the DVD/CD receiver to the corresponding in jacks

on the TV using an optional Y Pb Pr cable (C).

Caution

Connect the Left and Right AUDIO OUT jacks from

the DVD/CD receiver to the audio left/right in jacks

on the TV (A) using the supplied audio cables.

–

Make sure the DVD/CD receiver is connected directly

to the TV. Select the correct AV input on your TV.

– Do not connect your DVD/CD receiver to TV via your

VCR. The DVD image could be distorted by the copy

protection system.

ote

– Set the Progressive to “On” on the Setup menu for

progressive signal, see page 20.

Video connection

Connect the MONITOR OUT jack from the DVD

Receiver to the video in jack on the TV using the

video cable supplied (V).

Connect the Left and Right AUDIO OUT jacks from

the DVD/CD Receiver to the audio left/right in jacks

on the TV (A) using the audio cables.

S-Video connection

Connect the S-VIDEO OUT jack from the DVD/CD

receiver to the S-Video in jack on the TV using the

S-Video cable (S).

Connect the Left and Right AUDIO OUT jacks from

the DVD/CD receiver to the audio left/right in jacks

on the TV (A) using the audio cables.

Component Video (Color Stream ) connection

Connect the COMPONENT VIDEO OUT jacks from

theDVD/CD receiver to the corresponding in jacks

on the TV using an Y Pb Pr cable (C).

Connect the Left and Right AUDIO OUT jacks from

the DVD/CD receiver to the audio left/right in jacks

on the TV (A) using the audio cables.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Optional Equipment Connections

Connect a VCR to the VIDEO 1 jacks.

2 ^{Connect an additional VCR to the VIDEO 2 jacks.}

3 ^{Connect the optical output from a DVD Player (or Digital Device etc) to the OPTICAL IN jack.}

4 ^{Connect an optical input from a DVD Player (or Digital Device etc) to the OPTICAL OUT jack.}

Additional VCR

VCR

OUT

VIDEO

AUDIO (L)

AUDIO (R)

To AUDIO/

VIDEO OUT

To AUDIO/

VIDEO IN

To AUDIO/VIDEO

OUT

To AUDIO/

VIDEO IN

(VIDEO 1)

To AUDIO/

VIDEO OUT

(VIDEO 1)

To AUDIO/VIDEO IN

(VIDEO 2)

SUBWOOFER

LINE OUT

D T

OPTICAL

OUT

OPTICAL

DVD Player (or Digital Device, etc)

ote

^ꢀIf the audio format of the digital output does not match the capabilities of your DVD/CD receiver, the receiver will

produce a strong, distorted sound or no sound at all.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

AM-FM Antenna Connections

Connect the supplied FM/AM antennas for listening to the radio.

^ꢀConnect the AM loop antenna to the AM antenna terminals.

^ꢀConnect he FM wire antenna to the FM antenna terminals.

AM Loop Antenna (supplied)

FM Wire Antenna (supplied)

otes

ꢀ

To prevent noise pickup, keep the AM loop antenna away from the DVD/CD receiver and other components.

Be sure to fully extend the FM wire antenna.

After connecting the FM wire antenna, keep it as horizontal as possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Assembling the Front Speaker

Assembling the Wireless Speaker

^ꢀThe front speakers are detached from the speaker

stands.

^ꢀConnect the speaker cords and assemble the front

speakers to the speaker stands as illustrated.

To attach the wireless speaker

to the stand

Connect the speaker to the stand using the screwdriver

and screw, as illustrated.

How to connect the front speakers

When you do not use the stand

Connect the speaker cords to the appropriate terminals

on the bottom face of each front and rear speaker.

When you use the stand

After connecting the speaker cords to the appropriate

terminals on the bottom face of each front and rear

speaker, attach the front and rear speakers to the upper

speaker stands.

To detach the wireless speaker

from` the stand

Reverse the operations described in “To attach the

wireless speaker to the stand”.

Setting the Wireless Speaker

Channel

To attach the front speaker to the stand

If there is a similar wireless speaker product nearby,

interference may occur. In this case, change the

channel switch to a different channel, and turn off the power,

then turn on again.

By using the Channel Switch, set to the same

channel.

Channel Switch

CHANNEL

To detach the front speaker from the stand

Left/Right

Wireless Speaker

Rear of Transmitter

Notes

Push a pointed object

such as ball point pen

through the hole and tilt

the speaker as illustrated.

In order to operate the unit properly, both Left and Right

Wireless Speakers must be turned on.

Sound may be interrupted due to the effect of external

radio waves.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Speaker System Connection

^ꢀConnect the speakers to the front (right, left) or center speaker connectors.

^ꢀConnect the subwoofer to the woofer connector.

^ꢀConnect the power cord of the wireless speaker to the outlet, then press the power button on the wireless

speaker.

^ꢀConnect the adaptor (DC 7V) to the outlet and transmitter.

^ꢀConnect the ground cable to the transmitter and rear (right, left) speaker connectors.

^ꢀSet the distance between this unit and wireless speaker (right, left) within 10m.

Front Speaker (Left)

FE-6100TE

Front Speaker (Right)

FE-6100TE

Center Speaker

FE-6100CVE

SUBWOOFER

LINE OUT

D T

Wireless Speaker (Right)

FA-W6100SR

Be sure to connect the ground

cable to the ground cable con-

nector of this unit by using the

supplied hand screw. If this is

not connected, the transmitter

will not function.

Transmitter

ACC-W6100

Subwoofer

FE-6100WE

Wireless Speaker (Left)

FA-W6100SL

Adaptor (DC 7V)

Notes

ꢀ

It takes about five seconds (and may take longer) for the transmitter and wireless speaker (left, right) to communicate with each other.

When the unit is turned off, the transmitter is also turned off automatically.

If either wireless speaker (left. right) is turned off, the wireless speaker will not function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Cont’d)

Speaker System Connection (Cont’d)

^ꢀConnect the speakers using the supplied speaker cords.

^ꢀTo obtain the best possible surround sound, adjust the speaker parameters; volume, distance, etc.

If you feel a lack of bass

frequency

Front Speaker (Right)

Front Speaker (Left)

FE-6100TE

Connect an active subwoofer to the

WOOFER OUT connector using a

monaural audio cord (not supplied).

When you connect an active

subwoofer, disconnect the woofer from

the WOOFER speaker connector.

Center Speaker

FE-6100CVE

SUBWOOFER

LINE OUT

D T

Subwoofer

FE-6100WE

Red

Black

If you connect the wireless speakers using speaker

cords, be sure to match the speaker cord to the

appropriate terminal on the components: + to + and –

to –. If the cords are reversed, the sound will be dis-

torted and lack bass.

Wireless Speaker (Left)

FA-W6100SL

Wireless Speaker (Right)

FA-W6100SR

Note

ꢀ

If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections (Continued)

Speaker Placement

For a normal set up use 6 speakers (2 front speakers, center speaker, 2 rear speakers and subwoofer).

If you want to hear excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect a

subwoofer.

• Front Speakers

Set up the speakers at an equal distance apart and ideally at an angle of 45 degrees from your listening position.

• Center Speaker

It is ideal if the center speaker and front speakers are at the same height. But normally place the center speaker above or below

the television as shown below.

• Rear Speakers

Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround

sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or

above the level of the listener’s ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse

the sound.

In the case of a smaller room size, if the audience is near to the rear wall, set the rear speakers opposite each other, and set

the rear speakers above 23.5 - 35.5 inches than the listener’s ears.

• Subwoofer

This can be placed in any front position.

Subwoofer

Center Speaker

Front

Speaker

(Left)

Front

Speaker

(Right)

Rear

Speaker

(Right)

Speaker

(Left)

Speaker Placement Example

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Operation

Mini Glossary for Audio Stream & Sound Mode

You can enjoy surround sound simply by selecting one

of the pre-programmed sound fields according to the

program you want to listen to.

Surround mode

Allows you to enjoy 5.1(or 6) discrete channels of high-quality

digital audio from DTS program sources such as discs, DVD

and compact discs, etc. bearing the trademark. DTS Digital

Surround delivers up to 6 channels of transparent audio (which

means identical to the original masters) and results in excep-

tional clarity throughout a true 360 degree sound field. The

term DTS is a trademark of DTS Technology, LLC.

A) Using the SOUND MODE button

Each time you press the SOUND MODE button, the

sound mode changes in the following order;

PRO LOGIC → PLII MOVIE → PLII MUSIC →

PLII MATRIX → ROCK → POP → LIVE → DANCE → TECH-

NO → CLASSIC → SOFT → 3D SURROUND → BYPASS ...

Manufactured under license from DTS Technology, LLC.

ips

The Dolby Digital surround format lets you enjoy up to 5.1

channels of digital surround sound from a Dolby Digital pro-

^ꢀROCK: Reproduces the acoustics of rock music.

^ꢀPOP: Reproduces the acoustics of pop music.

^ꢀLIVE: Reproduces the acoustics of a live concert.

^ꢀDANCE: Reproduces the acoustics of dance music.

^ꢀTECHNO: Reproduces the acoustics of techno

music.

gram source. If you play DVDs with “

enjoy even better sound quality, greater spatial accuracy, and

improved dynamic range.

” mark, you can

Use this mode when playing movie or Dolby Digital 2 channel

^ꢀCLASSIC: Reproduces the acoustics of orchestral

music.

which carries the “

” mark. This mode provides the effect

of being in a movie theater or live concert house - an effect with

an intensity which can only be obtained through DOLBY PRO

LOGIC SURROUND. The effect of the front/back/left/right

movement of the sound image, as well as the sense of fixed

position in the sound image, is much clearer and more dynam-

ic than before.

^ꢀSOFT: Ideal for soft acoustic sounds.

B) Using the

button

PL II

Each time you press the

mode changes in the following order;

button, the sound

PL II

PRO LOGIC → PLII MOVIE → PLII MUSIC →

PLII MATRIX → BYPASS ...

(II)

(This function is availabe for 2-channel mode only)

Dolby Pro Logic II creates five full-bandwidth output channels

from two-channel sources. This is done using an advanced,

high-purity matrix surround decoder that extracts the spatial

properties of the original recording without adding any new

sounds or tonal colorations.

When a DVD is inserted.

You can change the sound mode of DVD (Dolby Digital, DTS,

PRO LOGIC, etc.) by pressing the AUDIO button repeatedly

on the remote during playback.

Although the DVD contents differ from disc -to-disc, the follow-

ing explains the basic operation when this feature is used.

MOVIE Mode:

The Movie mode is for use with stereo television shows and all

programs encoded in Dolby Surround. The result is enhanced

soundfield directionality that approaches the quality of discrete

5.1-channel sound.

Each time you press AUDIO button, the sound mode of DVD is

changed in the following order;

MUSIC Mode:

→

The Music mode is for use with any stereo music recordings.

MATRIX Mode:

The Matrix mode is the same as the Music mode except that the

directional enhancement logic is turned off. It may be used to

enhance mono signals by making them seem “larger.” The

Matrix mode may also find use in auto systems, where the fluc-

tuations from poor FM stereo reception can otherwise cause dis-

turbing surround signals from a logic decoder. The ultimate

“cure” for poor FM stereo reception may be simply to force the

audio to mono.

For your reference

•

The DVD/CD Receiver memorizes the last mode

settings for each source individually.

•

You can identify the encoding format of program

software by looking at its packaging.

- Dolby Digital discs are labeled with the

- Dolby Surround encoded programs are labeled with

the logo.

logo.

3D SURROUND

This unit can produce a 3D Surround effect, using 3D Surround

Sound technology, which simulates multi-channel audio play-

back from two conventional stereo speakers instead of the five

or more speakers normally required to listen to multi-channel

audio from a home theatre. This feature works with DVD discs

encoded with Dolby Pro Logic and Dolby Digital audio tracks.

- DTS Digital Surround discs are marked with DTS.

otes

ꢀ When you play sound tracks with 96kHz sampling frequen-

cy, the output signals will be converted to 48kHz (sampling

frequency).

BYPASS

Software with multichannel surround audio signals is played

according to the way it was recorded.

ꢀ Sound Mode is not functional if headphones are used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Operation (Continued)

DVD/CD Receiver Overview

This manual gives basic instructions for operating the

DVD/CD receiver. Some DVDs require specific opera-

tion or allow only limited operation during playback.

Playback Status Displays

TITLE

Repeat Title

CHAPT

Repeat Chapter

GROUP

Repeat Group (DVD audio discs only)

Repeat A-B

When this occurs, the symbol

appears on the TV

screen, indicating that the operation is not permitted by

the DVD/CD receiver or is not available on the disc.

OFF

Repeat Off

Resume play from this point

Action prohibited or not available

On-Screen Displays

General playback status can be displayed on the TV

screen. Some menu options can be changed on the

menu.

otes

ꢀ Some discs may not provide all of the features on the

on-screen display example shown below.

ꢀ If no button is pressed for 10 seconds, the on-screen

display disappears.

On-screen display operation

Press DISPLAY during playback.

Use 3/4to select a menu option.

The selected option will be highlighted.

Use 1/2to change the setting of a option.

The number buttons can be also be used for setting

numbers (e.g., title number). For some functions,

press ENTER to execute the setting.

DVD-V

Menu Options

Function (Use 3/4to select desired option)

Selection Method

Title Number

Shows the current title number and total number of

, or

1 /3

1 /12

titles, and skips to the desired title number.

Numbers, ENTER

Chapter Number

Time search

Shows the current chapter number and total number of

chapters, and skips to the desired chapter number.

, or

Numbers, ENTER, SKIP

Shows the elapsed playing time, and

searches the point directly from the elapsed time.

0:20:09

Numbers, ENTER

Audio language

and Digital Audio

Output mode

1 ENG

5.1 CH

Shows the current audio soundtrack language,

encoding method, and channel number, and

changes the setting.

, or

AUDIO

Subtitle language

Shows the current subtitles language, and

1 2

, or

SUBTITLE

ABC

OFF

1 /1

changes the setting.

Angle

Shows the current angle number and total number of

angles, and changes the angle number.

, or

ANGLE

Sound

Shows the current sound mode, and

changes the setting.

, or

BYPASS

SOUND MODE

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Operation (Continued)

On-Screen Displays (Continued)

DVD-A

Menu Options

Function (Use 3/4to select desired option)

Selection Method

Group Number

Shows the current group number and total number

, or

2 /6

1 /12

of groups, and skips to the desired group number.

Numbers, ENTER

Track Number

Time search

Shows the current track number and total number

of tracks, and skips to the desired track number.

, or

Numbers, ENTER

Shows the elapsed playing time.(Display only)

0:10:15

DVD Audio

Output mode

Shows the current encoding method, and channel

number, and changes the setting.

, or

PCM

5 CH

AUDIO

Shows the current subtitles language, and

1 2

, or

SUBTITLE

Subtitle language

Page (or Angle)

ABC

OFF

changes the setting.

Shows the current page (or angle) number and total number

of pages (or angle), and changes the page (or angle) number.

, or

1 /12

ANGLE

1 /1

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Operation (Continued)

Picture

Initial Setup

You can set your own Personal Preferences on the

TV Aspect

DVD-V

DVD-A

DVD/CD receiver

4:3 Letterbox: Select when a standard 4:3 TV is con-

nected. Displays theatrical images with masking bars

above and below the picture.

4:3 Panscan: Select when a conventional TV set is

connected. The video material formatted in the Pan &

Scan style is played back in that style (Both sides of the

picture are cut off).

Initial Setup and Operation Overview

Press SETUP.

The Setup menu appears.

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

16:9 Wide: Select when a 16:9 wide TV is connected.

German

Spanish

Italian

4:3 Letterbox

4:3 Panscan

16:9 Wide

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Country Code

Hungarian

Other – – – –

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Use 3/4to select the menu option.

The screen will show the current setting for the

selected menu option, as well as alternate

setting(s).

Progressive Scan

DVD-V

DVD-A

Progressive Scan Video provides the highest quality

pictures with less flickering.

If you are using the COMPONENT VIDEO OUT/

PROGRESSIVE SCAN jacks, but are connecting the

DVD/CD receiver to a standard (analog) television, set

Progressive Scan to Off.

If you are using the Component Video jacks for

connection to a TV or monitor that is compatible with a

progressive scan signal, set Progressive Scan to On.

While the menu option is selected, press 2, then

3/4to select the desired setting.

Press ENTER to confirm your selection.

Some menu option require additional steps.

Press SETUP, RETURN, or PLAY to move the

Setup menu.

Language

Disc Language

DVD-V

DVD-A

Off

Disc Audio

Disc Subtitle

Disc Menu

Rating

Select a language for the disc’s Menu, Audio, and

Subtitle.

Original : The original language set for the disc is selected.

Other : To select another language, use the number buttons to

enter the corresponding 4-digit number according to the lan-

guage code list on page 34. If you enter the wrong language

code, press CLEAR.

Country Code

TV Aspect

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Original

English

French

Disc Audio

Disc Subtitle

Disc Menu

German

Spanish

Italian

Rating

Country Code

TV Aspect

Caution

Chinese

Polish

Menu Language

Progressive Scan

Digital Audio Output

5.1 Speaker Setup

Others

Once the setting for progressive scan output is entered, an

image will only be visible on a progressive scan compatible

TV or monitor. If you set Progressive Scan to On in error, you

must reset the unit. Press STOP to stop any disc that is play-

ing. Next, press STOP again and hold it for five seconds

before releasing it. The video output will be restored to the

standard setting, and a picture will once again be visible on a

conventional analog TV or monitor.

Hungarian

Other – – – –

Menu Language

Select a language for the Setup menu. This is the menu

you see when you press SETUP.

English

Spanish

French

Disc Audio

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Operation (Continued)

Speaker Setup

DVD-V

DVD-A

Auto Play

You can set up the DVD/CD receiver so a DVD disc

automatically starts playing whenever a DVD is insert-

ed.

If Auto Play mode is set to On, this DVD/CD receiver

will search a title that playback time is longest and then

play back the title automatically.

On: Auto Play function is active.

Off: Auto Play function is not active.

5.1 Speaker settings

DVD-V

DVD-A

Select speaker settings, including volume balance and

delay time, or test the speaker settings.

Speaker settings are only active on the Analog Multi-

Channel Output. (See “Speaker Setup”, on page 31.)

Disc Audio

Disc Subtitle

Disc Menu

Rating

ote

Front L

Volume

Size

The Auto Play function may not work for some DVDs.

Country Code

0 dB

Small

1 ft

TV Aspect

Menu Language

Progressive Scan

Distance

Test

Return

5.1 Speaker Setup

Others

DRC, Vocal and Auto Play settings are adjustable.

ꢀ Use 3/4to select the desired menu option and press

ENTER. The setting of the selected menu option is

switched between On and Off.

Disc Audio

Disc Subtitle

Disc Menu

Rating

DRC

Vocal

Auto Play

Off

Country Code

TV Aspect

Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Dynamic Range Control (DRC)

With the DVD format, you can hear a program’s sound-

track in the most accurate and realistic presentation

possible, thanks to digital audio technology. However,

you may wish to compress the dynamic range of the

audio output (the difference between the loudest sounds

and the quietest ones). Then, you may listen to a movie

at a lower volume without losing clarity of sound. Set

DRC to On for this effect.

Vocal

Set Vocal to On only when a multi-channel karaoke

DVD is playing. The karaoke channels on the disc will

mix into normal stereo sound.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pre-Operation (Continued)

Parental Control

DVD-V

Country Code

Enter the code of a country/area whose standards were

used to rate the DVD video disc, referring to the list

(See “Country Code List”, page 35.).

Rating

DVD-V

Movies on DVDs may contain scenes not suitable for

children. Therefore, discs may contain Parental Control

information that applies to the complete disc or to

certain scenes on the disc. These scenes are rated

from 1 to 8, and alternatively, more suitable scenes are

available for selection on some discs. Ratings are

country-dependent. The Parental Control feature allows

you to prevent discs from being played by your children

or to have certain discs played with alternative scenes.

Disc Audio

Code Set

Disc Subtitle

Disc Menu

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

5.1 Speaker Setup

Others

Disc Audio

Disc Subtitle

Disc Menu

Select Country Code using the 3/4buttons on

the Setup menu.

Rating

Country Code

TV Aspect

Menu Language

Progressive Scan

2 ^{While Country Code is selected, press 2.}

Unlock

Change

3 ^{Follow step 3 of “Rating” on left.}

5.1 Speaker Setup

Others

4 ^{Select the first character using the 3/4buttons.}

Select “Rating” on the Setup menu using the

3/4buttons.

Shift the cursor using 2 button and select the

2 ^{While “Rating” is selected, press 2.}

second character using 3/4buttons.

Press ENTER to confirm your Country Code

selection, then press SETUP to exit the menu.

When you have not entered a password.

Enter a 4-digit password using the number buttons

to create a personal 4-digit security password. then

press ENTER. Enter the 4-digit password again and

press ENTER to verify.

When you have already registered a password;

Enter a 4-digit password using the numbered but-

tons to confirm the personal 4-digit security pass-

word, then press ENTER.

ote

Confirmation of the 4-digit password is necessary when

the code is changed (see “Changing the 4-digit code”

below.).

Changing the 4-digit code

1 Follow Steps 1-2 as shown above to the left (Rating).

2 Enter the old code, then press ENTER.

3 Select Change using 3/4buttons then press

ENTER.

4 Enter the new 4-digit code, then press ENTER.

5 Enter exactly the same code a second time and veri-

fy by pressing ENTER.

If you make a mistake before pressing ENTER, press

CLEAR and enter 4-digit security password again.

Select a rating from 1 to 8 using the 3/4but-

tons. One (1) has the least playback restrictions.

Eight (8) has the most playback restrictions.

Unlock: If you select Unlock, Parental Control is

not active. The disc will play in full.

6 Press SETUP to exit the menu.

Ratings 1 to 8: Some discs contain scenes not

suitable for children. If you set a rating for the play-

er, all disc scenes with the same rating or lower will

be played. Higher rated scenes will not be played

unless an alternative scene is available on the disc.

The alternative must have the same rating or a

lower one. If no suitable alternative is found, play-

back will stop. You must enter the 4-digit password

or change the rating level in order to play the disc.

If you forget your 4-digit code

If you forgot your password, to clear the current pass-

word, follow the procedure below.

1 Press SETUP to display the Setup menu.

2 Use the Number buttons to enter the 6-digit number

“210499”.

The 4-digit password is cleared.

3 Enter a new code as shown above to the left

(Rating).

Press ENTER to confirm your rating selection,

then press SETUP to exit the menu.

ote

This function may not work for some DVDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation

DVD Playback

General Features

Playback Setup

DVD-V

DVD-A

ote

Unless stated otherwise, all operations described use

the remote control. Some features may also be

available on the Setup menu.

ꢀ Turn on the TV and select the video input source con-

nected to the DVD/CD receiver.

ꢀ Audio system: Turn on the audio system and select

the input source connected to the DVD/CD receiver.

TITLE /GROUP Selection

Press OPEN/CLOSE to open the disc tray.

1 /3

1/6

DVD-V

DVD-A

When a disc has more than one title/group, you can

move to another title as follows:

^ꢀPress DISPLAY, then use the appropriate number

button (0-9) to select a title/group number.

Load your chosen disc in the tray, with the

playback side facing down.

Press OPEN/CLOSE to close the tray.

READING appears on the TV screen, and playback

starts automatically. If playback does not start,

press PLAY.

In some cases, the disc menu might appear

instead.

CHAPTER/TRACK Selection

DVD-A

DVD-V

1 /12

1 /3

When a title on a disc has more than one chapter or a

disc has more than one track, you can move to another

chapter/track as follows:

If a menu screen is displayed

The menu screen may be displayed first after loading a

DVD which offers a menu.

ꢀ

Press SKIP/SCAN . or > briefly during

playback to select the next chapter/track or to return to the

beginning of the current chapter/track.

DVD-V

Use the 1 234 buttons to select the title/chapter you

want to view, then press ENTER to start playback.

Press TITLE or MENU to return to menu display.

ꢀ

Press . twice briefly to step back to the previous chap-

ter/group/track.

To go directly to any chapter during DVD playback, press

DISPLAY. Then, press 3/4to select the

DVD-A

chapter/group/track icon. Then, enter the chapter/track

number using the numbered buttons (0-9).

Use the 1 2 3 4 buttons to select an option you

want, then press ENTER to view the option.

ote

otes

For two-digit numbers, press the numbered buttons

(0-9)in rapid succession.

– If Parental Control is set and the disc is not within the

Rating settings (not authorized), the 4-digit code must

be entered and/or the disc must be authorized (see

“Parental Control”, on page 22).

DVD-V

– DVDs may have a regional code.

1 Press and hold SKIP/SCAN . or > for about

two seconds during playback.

Your receiver will not play discs that have a regional

code different from your receiver. The regional code

for this receiver is 1 (one).

The receiver will now go into SEARCH mode.

2 Press and hold SKIP/SCAN . or > repeatedly

to select the required speed: mX2, mX4, mX16,

mX100 (backward) or MX2, MX4, MX16,

MX100 (forward).

3 To return to normal play, press PLAY.

ote

When using a DVD audio disc that includes pictures,

this operation may be permitted in some picture

segments.

Pause

DVD-V

1 Press PAUSE/STEP during playback.

2 To return to playback, press PLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation (Continued)

General Features (continued)

DVD Audio Discs - Repeat Track/Group/Off

1.To repeat the currently playing track, press REPEAT.

The Repeat Track icon appears on the TV screen.

Still Picture and Frame-by-Frame playback

DVD-V

2.To repeat the group currently playing, press REPEAT

a second time.

The Repeat Group icon appears on the TV screen.

1.Press PAUSE/STEP during playback.

The DVD/CD receiver will now go into PAUSE mode.

2.You can advance the picture frame-by-frame by

pressing PAUSE/STEP repeatedly on the remote con-

trol.

3.To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

0:20:09

-:--:--

3.To return to normal playback, press PLAY.

Time Search

DVD-V

The Time Search function allows you to start playing at

any chosen time on the disc.

ote

If playing a DVD audio disc that includes pictures, this

operation may be permitted for some picture

segments.

1.Press DISPLAY during playback. The on-screen dis-

play appears on the screen.

The Time Search box shows the elapsed playing time of the

current disc.

Slow Motion

DVD-V

2.Within 10 seconds, use 3/4to select the Time

Search icon in the on-screen display.

The “-:--:--” appears in the Time Search box.

1.Press SLOW SCAN t or T during playback.

The receiver will enter SLOW mode.

2.Use the SLOW SCAN t or T to select the required

speed: t 1/16, t 1/8, t 1/4 or t 1/2 (backward),

T 1/16, T 1/8, T 1/4 or T 1/2 (forward).

3.To exit slow motion mode, press PLAY

3.Within 10 seconds, use the number buttons to enter

the required start time. Enter hours, minutes, and sec-

onds from left to right in the box.

If you enter the wrong numbers, press CLEAR to remove the

numbers you entered. Then enter the correct numbers.

4.Within 10 seconds, press ENTER to confirm the start

time.

Playback starts from the selected time on the disc. If you enter

an invalid time, playback will continue from the current point.

Repeat A-B

DVD-V

OFF

To repeat a sequence in a title or group:

1.Press REPEAT A-B at your chosen starting point.

“ A * ” appears briefly on the TV screen.

2.Press REPEAT A-B again at your chosen ending

point.

“A B” appears briefly on the TV screen, and the repeat

sequence begins (“AsB” appears the display window).

3.To cancel the sequence, press REPEAT A-B.

Repeat

DVD-V

TITLE

CHAPT

OFF

DVD Video Discs - Repeat Chapter/Title/Off

1.To repeat the currently playing chapter, press

REPEAT.

The Repeat Chapter icon appears on the TV screen.

2.To repeat the title currently playing, press REPEAT a

second time.

The Repeat Title icon appears on the TV screen.

3.To exit Repeat mode, press REPEAT a third time.

The Repeat Off icon appears on the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation (Continued)

General Features (continued)

3. Press CLEAR.

The Marker number will be erased from the list.

4. Repeat steps 2 and 3 to erase additional Marker

3D SUR

BYPASS

3D Surround

DVD-V

numbers.

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

1.Press SOUND MODE to select “3D SUR” during play-

back.

5. To remove the MARKER SEARCH menu, press

SEARCH.

DVD-V

Special DVD Features

Checking the contents of DVD Video

discs: Menus

DVDs may offer menus that allow you to access special

features. To use the disc menu, press MENU. Then,

press the appropriate number button to select an option.

Or, use the 1 234 buttons to highlight your selection,

then press ENTER.

2.To turn off the 3D Surround effect, press SOUND

MODE again to select “BYPASS”.

Zoom

DVD-V

The Zoom function allows you to enlarge the video

image and to move through the enlarged image.

DVD-V

Title Menu

1.Press ZOOM during playback or still playback to acti-

vate the Zoom function.

1.Press TITLE.

If you press ZOOM repeatedly, the magnification level

increases up to six steps.

If the current title has a menu, the menu will appear on the

screen. Otherwise, the disc menu may appear.

2.The menu can list camera angles, spoken language

and subtitle options, and chapters for the title.

2.Use the 1 234 buttons to move through the zoomed

picture.

3.To remove the title menu, press TITLE again.

3.Press CLEAR to resume normal playback or return to

the paused image.

DVD-V

Disc Menu

1.Press MENU.

ote

ꢀ The zoom function may not work on some DVDs.

The disc menu is displayed.

2.To remove the disc menu, press MENU again.

DVD-V

Marker Search

1 /1

DVD-V

MARKER SEARCH

Camera Angle

1/9

If the disc contains scenes recorded at different camera

angles, you can change to a different camera angle

during playback.

You can start playback from a memorized point. Up to

nine points can be memorized.

To enter a mark, follow these steps.

^ꢀPress ANGLE repeatedly during playback to select a

desired angle.

1.During disc playback, press MARKER when

playback reaches the spot that you want to

memorize.

The number of the current angle appears on the display.

Changing the Audio Language

The Marker icon will appear on the TV screen briefly.

1 ENG

5.1 CH

PPCM

5 CH

2.Repeat Step 1 to enter up to nine Marker points on a

disc.

DVD-V

DVD-A

Press AUDIO repeatedly during playback to hear a dif-

ferent audio language or audio track.

To Recall Marked Scenes

1.During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

Changing the Audio Channel

2.Within 10 seconds, use 1/2 to select the Marker

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT or RIGHT).

number that you want to recall.

3.Press ENTER.

Playback will start from the Marked scene.

ABC

1 ENG

DVD-V

DVD-A

Subtitles

4.To remove the MARKER SEARCH menu, press

SEARCH.

Press SUBTITLE repeatedly during playback to see the

different subtitle languages available.

To Clear a Marked Scene

ote

1. During disc playback, press SEARCH.

The MARKER SEARCH menu will appear on the screen.

appears, the feature is not available on the disc.

2. Use 1/2 to select the Marker number that you want

to erase.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation (Continued)

DVD-A

DVD Audio Discs

1 /12

Changing PAGEs

DVD-A

Since DVD Audio discs can hold a lot of content, there

are various ways to see what’s available on the disc.

1.Press DISPLAY during playback.

DVD Audio is a new disc format building on the success

of DVD to provide high quality, uncompressed, multi-

channel audio for a new experience in audio quality. A

DVD Audio disc can be identified by the DVD audio logo

on the disc jacket or on the disc itself.

2.Use 3/4to select the Page icon.

3.Use 1/2 to select a page number.

What appears on the screen will vary from disc to disc

because the information available depends upon the way the

disc was created.

DVD Audio can provide higher quality stereo than Audio

CDs with a sampling rate of up to 192kHz (compared to

44.1kHz for CDs). DVD Audio digital sound can be

delivered with up to 24 bits of data (compared to 16 bits

for a standard CD).

ote

Since the authoring of DVD Audio Discs varies, some of

the on-screen display choices might not be available for

the disc you’re playing.

A typical DVD Audio disc contains up to seven times the

data capacity of a CD. This additional space is used for

music, either Advanced Resolution multi-channel sound

quality that is closer to the artist’s master recording or

for longer recordings. Many DVD Audio discs contain

on-screen text, such as artist biographies, playlists, or

lyrics. Some DVD Audio discs contain photo galleries or

video clips.

ote

If you use the DIGITAL OUT (OPTICAL) for your audio

connection, the sound will only be similar to CD-quality

sound even though you’re playing a DVD Audio disc.

1/6

Changing GROUPs

DVD-A

Some DVD Audio discs divide content into different

groups. Your player enables you to quickly access dif-

ferent groups during playback via the on-screen display.

1.Press DISPLAY during playback on in Stop mode.

2.Use 3/4to select Group icon.

3.Press 1/2 or the numbered buttons (0-9) to select a

group number.

ote

Sometimes the author of the disc creates hidden con-

tent that can only be accessed by entering a password.

If the lock icon appears on the TV screen, enter the

password (sometimes you’ll find it on the disc’s jacket

cover or on a web site). This password control isn’t dic-

tated by your DVD/CD receiver — it is a function of the

disc.

Since the authoring of DVD Audio Discs varies, some of

the on-screen display choices might not be available for

the disc you’re playing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3/WMA Disc Operation

Notes on MP3/WMA Recordings

Playing an Audio CD or MP3/WMA Discs

About MP3

MP3

WMA

^ꢀAn MP3 file is audio data compressed by using the

MPEG1 audio layer-3 file-coding scheme. We call

files that have the “.mp3” file extension “MP3 files”.

^ꢀThe player can not read an MP3 file that has a file

extension other than “.mp3”.

The DVD/CD receiver can play MP3/WMA formatted

recordings on CD-ROM, CD-R, or CD-RW discs.

Before playing MP3/WMA recordings, read the notes on

MP3/WMA Recordings on right.

Insert a disc and close the tray.

About WMA(Window Media Audio)

^ꢀA WMA file is a Microsoft audio compression

technology.

^ꢀWMA(Windows Media Audio) offers double the audio

compression of the MP3 format.

Audio CD: Audio CD menu appears on the TV

screen go to step 4.

MP3/WMA disc: The MP3/WMA-JPEG choice

menu appears on the TV screen. Go to step 2

MP3 WMA

JPEG

MP3/WMA Disc compatibility with this DVD/CD

receiver is limited as follows:

1. Sampling Frequency / only at 44.1kHz (MP3),

32 - 44.1kHz (WMA)

Use 3/4to select the MP3/WMA option then

press ENTER.

The MP3/WMA menu appears on the TV screen.

Press RETURN to move to the MP3/WMA-JPEG

choice menu.

2. Bit rate / within 32 - 320kbps (MP3),

32 - 128kbps (WMA)

3. CD-R physical format should be “ISO 9660”

4. If you record MP3/WMA files using the software

which cannot create a FILE SYSTEM, for example

“Direct-CD” etc., it is impossible to playback

MP3/WMA files. We recommend that you use “Easy-

CD Creator”, which is the default in most software.

5. A single session disc requires MP3/WMA files in the

first track. If there is no MP3/WMA file in the 1st

track, it cannot playback MP3/WMA files. If you wish

to playback MP3/WMA files, format all the data in

the disc or use a new one.

6. File names should be named using 8 letters or less

and must incorporate “.mp3” or “.wma” extension

e.g. “********.MP3” or “********.WMA”.

7. Do not use special letters such as “/ : * ? “ < > ” etc.

8. Total number of files on the disc should be less than

650.

Program

MP3 WMA

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Clear All

OFF

00:00

Use 3/4 to select a folder, and ENTER.

A list of files in the folder appears.

Use 3/4to select a track then press PLAY or

ENTER.

Playback starts.

During playback, the current track’s elapsed playing

time will appear on the display window and menu.

Playback will stop at the end of the disc.

Press TITLE to move to the next page.

Press MENU to move to the previous page.

This DVD/CD receiver requires discs/recordings to meet

certain technical standards in order to achieve optimal

playback quality. Pre-recorded DVDs are automatically

set to these standards. There are many different types

of recordable disc formats (including CD-R containing

MP3 or WMA files). That require certain pre-existing

conditions (see above) to insure compatible playback.

Program

MP3 WMA

TRACK01

TRACK 1.mp3

TRACK02

TRACK03

TRACK04

TRACK05

TRACK06

TRACK07

TRACK08

TRACK 2.mp3

TRACK 3.mp3

TRACK 4.mp3

TRACK 5.mp3

TRACK 6.mp3

TRACK 7.mp3

TRACK 8.mp3

Clear All

OFF

Clear All

BYPASS

00:00

0: 56: 18

STER.

Customers should also note that permission is

required in order to download MP3/WMA files and

music from the Internet. Our company has no right

to grant such permission. Permission should

always be sought from the copyright owner.

Audio CD Menu

If you are in a file list and want to return to the Folder

list, use 3/4to highlight and press ENTER to return to

the previous menu screen.

MP3/WMA Menu

5 ^{To stop playback at any other time, press STOP.}

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio CD and MP3/WMA Disc Operation (Continued)

MP3

WMA

Pause

Repeat A-B

1.Press PAUSE/STEP during playback.

To repeat a sequence.

2.To return to playback, press PLAY or press

PAUSE/STEP again.

1.During disc playback, press REPEAT A-B at your

chosen start point.

The Repeat icon and “ * ” appears on the menu screen.

MP3

2.Press REPEAT A-B again at your chosen end point.

The Repeat icon and “A B” appear on the menu screen, and

the sequence begins to play repeatedly.

WMA

Changing Tracks

^ꢀPress SKIP/SCAN . or > briefly during

playback to go to the next track or to return to the

beginning of the current track.

3.To exit the sequence and return to normal play, press

REPEAT A-B again.

The Repeat icon and “OFF” appear on the menu screen.

^ꢀPress SKIP/SCAN . twice briefly to step back to

the previous track.

^ꢀFor audio CDs, to go directly to any track, enter the

track number using the numbered buttons (0-9) dur-

ing playback.

3D Surround

This unit can produce a 3D Surround effect, which

simulates multi-channel audio playback from two

conventional stereo speakers, instead of the five or

more speakers normally required to listen to multi-

channel audio from a home theater system.

MP3

WMA

Repeat Track/All/Off

1.To repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu screen.

1.Use SOUND MODE to select “3D SUR” during play-

2.To repeat all tracks on a disc, press REPEAT a sec-

ond time.

The Repeat icon and “ALL” appear on the menu screen.

back.

2.To turn off the 3D Surround effect, use SOUND

MODE to select “BYPASS.”.

3.To cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu screen.

Changing the Audio Channel

Press AUDIO repeatedly during playback to hear a

different audio channel (STER., LEFT, or RIGHT).

MP3

WMA

1.Press and hold SKIP/SCAN . or > for about

two seconds during playback.

The player will now go into SEARCH mode.

2.Press and hold SKIP/SCAN . or > repeatedly

to select the required speed: mX2, mX4, mX8

(backward) or MX2, MX4, MX8 (forward).

Search speed and direction are indicated on the menu

screen.

3.To exit SEARCH mode, press PLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

JPEG FIle Operation

JPEG

Changing Files

Viewing JPEG Files

Press SKIP/SCAN . or > once while viewing a

This DVD/CD receiver can play discs with JPEG files

and Kodak picture CDs. Before viewing JPEG files,

read the notes on JPEG files on the right.

picture to advance to the next file or to the previous file.

Still Picture

1.Press PAUSE/STEP while viewing a slide show.

The DVD/CD receiver will now go into PAUSE mode.

2.To return to the slide show, press PLAY or press

PAUSE/STEP again.

Insert a disc and close the tray.

The MP3/WMA-JPEG selection menu appears on

the TV screen.

MP3 WMA

JPEG

To flip the picture

Use 3/4while viewing a picture to flip the picture

horizontally or a vertically.

Use 3/4to select the JPEG option then press

ENTER.

The JPEG menu appears on the TV screen.

To rotate the picture

JPEG

Use 1/2 while viewing a picture to rotate the picture

clockwise or counter clockwise.

Folder1

Folder2

Folder3

Folder4

Folder5

Folder6

Folder7

Folder8

Notes on JPEG Files

Off

Slide Speed

^ꢀDepending upon the size and number of the JPEG

files, it could take a long time for the DVD/CD receiv-

er to read the disc’s contents. If you don’t see an on-

screen display after several minutes, some of the files

are too big — reduce the resolution of the JPEG files

to less than 2 mega pixels and burn another disc.

Use 3/4 to select a folder, and ENTER.

A list of files in the folder appears.

Press RETURN to move to the MP3/WMA-JPEG

selection menu.

Tip

^ꢀTotal number of files and folders on the disc should

be less than 650.

If you are in a file list and want to return to the Folder

list, use the 34 buttons on the remote to highlight

^ꢀSome disc may be incompatible due to different

recording format or condition of disc.

“

and press ENTER to return to the

previous menu screen.

”

ꢀ Ensure that all the selected files have the “.jpg” exten-

sions when copying into the CD layout.

If you want to view a particular file, use 3/4to

highlight a file and press ENTER or PLAY.

Viewing the file starts.

ꢀ If the files have “.jpe” or “.jpeg” extensions, please

rename them as “.jpg” files.

While viewing a file, press RETURN to move to the

previous menu (JPEG menu).

Press TITLE to move to the next page.

Press MENU to move to the previous page.

ꢀ File names without “.jpg” extension will not be able to

be read by this DVD/CD receiver, even though the

files are shown as JPEG image files in windows

explorer.

Folder1

JPEG

Picture1

Picture2

Picture3

Picture4

Picture5

Picture6

Picture7

Off

5/32

1024X768

Slide Speed

5/32

1024X768 Picture5.jpg

There are three viewing Slide Speed options: Fast,

Normal, Slow, and Off. Use 1/2 to highlight the Slide

Speed option then use 3/4 to select the option you

want to use, and press ENTER.

To stop viewing at any other time, press STOP.

The JPEG menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3

WMA

Programmed Playback

Audio CD and MP3/WMA Disc

Programmed Playback

Repeat Programmed Tracks

^ꢀTo repeat the track currently playing, press REPEAT.

The Repeat icon and “TRACK” appear on the menu display.

^ꢀTo repeat all tracks on the program list, press

REPEAT a second time.

The Repeat icon and “ALL” appear on the menu display.

^ꢀTo cancel Repeat mode, press REPEAT a third time.

The Repeat icon and “OFF” appear on the menu display.

The Program function enables you to store your favorite

tracks from any disc in the player’s memory.

Program can contain 30 tracks.

Press PROGRAM during playback or in the Stop

mode to enter the Program Edit mode.

Erasing a Track from the Program List

1.Press PROGRAM during playback (Audio CD and

The

mark will appear to the right of the word Program

on the right side of the menu display.

MP3/WMA disc only) or in the stop mode to enter the

Program Edit mode.

ote

The

mark will appear.

Press PROGRAM to exit the Program Edit mode;

2.Press 2 to move to the Program list.

3.Use 3/4to select the track that you wish to erase

from the Program list.

4.Press CLEAR.

The track will be erased from the Program list.

the

mark will disappear.

Select a track, then press ENTER to place the

selected track on the Program list.

Repeat step 2 to place additional tracks on the

Program list.

Erasing the Complete Program List

1.Follow steps 1-2 of “Erasing a Track from Program

List” as above.

2.Use 3/4to select “Clear All”, then press ENTER.

The complete Program for the disc will be erased.

The programs are also cleared when the disc is removed.

Program

MP3 WMA

TRACK 1

TRACK 12

TRACK 8

TRACK 10

TRACK 3

TRACK 8

TRACK 2

TRACK 4

TRACK 3

TRACK 1

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

TRACK 2

TRACK 3

TRACK 4

TRACK 5

TRACK 6

TRACK 7

TRACK 8

Clear All

BYPASS

Clear All

OFF

0: 56: 18

STER.

00:00

Audio CD menu

MP3/WMA menu

Press 2.

The programmed track you selected last is highlighted on

the program list.

Use 3/4to select the track you want to start

playing.

Press TITLE to move to the next page.

Press MENU to move to the previous page.

Press PLAY to start.

Playback begins in the order in which you programmed

the tracks and “PROG.” appears on the menu display.

Playback stops after all of the tracks on the Program list

have played once.

To resume normal playback from pro-

grammed playback, select a track of CD (or

MP3/WMA) list and then press ENTER.

“PROG.” indicator disappears from the on the menu dis-

play.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speaker Setup

Additional Information

Adjust the following settings for the built-in 5.1 channel

surround decoder.

Last Condition Memory

DVD

Disc Audio

This DVD/CD receiver memorizes the user settings for

the last disc that you have viewed. Settings remain in

memory even if you remove the disc from the player or

switch off the player. If you load a disc that has its set-

tings memorized, the latest stop position is automatical-

ly recalled.

Disc Subtitle

Disc Menu

Rating

Front L

Volume

Size

Country Code

0 dB

Small

1 ft

TV Aspect

Menu Language

Progressive Scan

Distance

Test

Return

otes

5.1 Speaker Setup

Others

– Settings are stored in memory for use any time.

– This DVD/CD receiver does not memorize settings of

a disc if you switch off the DVD/CD receiver before

commencing to play it.

Select “5.1 Speaker Setup” on the Setup menu

using the 3/4buttons.

While “5.1 Speaker Setup” is selected, press 2

button.

3 ^{Use 2buttons to select the desired speaker.}

4 ^{Adjust options by using 341 2buttons.}

Speaker selection

Select a speaker that you want to adjust. ((Front speak-

ers (Left), Front speakers (Right), Center Speaker, Rear

speakers (Left), Rear speakers (Right), or Subwoofer))

Volume

Use 1/ 2to adjust the output level of the selected

speaker. (-6dB ~ +6dB)

Size

Since the speaker settings are fixed, you cannot change

the settings.

Distance

If you connected speakers to your DVD/CD receiver ,

setting the Distance lets the speakers know how far the

sound has to travel to reach your listening point. This

allows the sound from each speaker to reach the listen-

er at the same time. (1 ft = 30.48 cm)

ote

You can not set the distancefor the subwoofer speaker.

Test

Press ENTER to test the signals of each speaker.

Adjust the volume to match the volume of test signals

memorized in the system.

^ꢀFront Left (L) → Centre → Front Right (R) →

Rear Right (R) → Rear Left (L) → Subwoofer

Return

Press ENTER to return to the previous menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Operation

Presetting Radio stations

Listening to the radio

You can preset 30 stations for FM and AM (MW). Before

tuning, make sure that you have turned down the vol-

ume.

Preset radio stations in the DVD/CD receiver’s memory

first (see “Presetting radio stations” on the left).

Press BAND repeatedly until AM (MW) or FM

Use BAND on the remote control to access FM

or AM (MW) in the display window.

appears in the display window.

The last received station is tuned in.

Thereafter, each time you press BAND, FM and

AM (MW) change alternately.

Press PRESET +/- repeatedly to select the pre-

set station you want.

Each time you press the button, the DVD receiver tunes in

one preset station at a time.

Press and hold TUNING

the front panel for about two seconds until the

frequency indication starts to change, then

release.

Scanning stops when the DVD/CD Receiver tunes in a

station. “TUNED” and “STEREO” (for stereo program)

appear in the display window.

Adjust the volume by rotating VOLUME on the

front panel or by pressing VOLUME + or - on the

remote control repeatedly.

To turn the radio Off

Press POWER to turn the DVD/CD receiver off or select

another function mode (CD/DVD, VIDEO1, or VIDEO2).

ote

“TUNED” only appears when the signal is FM and

STEREO.

To listen to non-preset radio stations

^ꢀUse manual or automatic tuning in step 2.

^ꢀFor manual tuning, press TUNING

on the front panel repeatedly.

Press MEMORY on the front panel.

A preset number will flash in the display window.

^ꢀFor automatic tuning, press and hold TUNING

or for about two seconds on the front

panel.

Press TUNING

on the front

panel to select the preset number you want.

Press MEMORY on the front panel again.

The station is stored.

To select a preset radio station directly

You can use the number buttons on the remote control

to select a preset radio station directly.

For example, to listen to preset station 4, press 4 on the

remote control. To listen to preset station 19, press 1

then 9 (within 3 seconds).

Repeat steps 3 to 6 to store other stations.

To tune in a station with a weak signal

Press TUNING

repeatedly in step 3

to tune in the station manually.

For your reference

^ꢀIf a FM program is noisy

To clear all the stored stations

Press MONO/STEREO repeatedly on the front panel

so that “STEREO” disappears from the display win-

dow. There will be no stereo effect, but the reception

will improve. Press the button again to restore the

stereo effect.

Press and hold MEMORY for about two seconds.

“CLEAR ALL” is appears in the display window, then

press MEMORY again, the stations are cleared.

^ꢀIf you have accidentally entered into the "CLEAR

ALL" mode and you do not wish to clear the memory,

do not press any key. After a few seconds, the

"CLEAR ALL" display will go off by itself and change

to normal mode.

^ꢀTo improve reception

Reorient the supplied antennas.

ote

If all stations have already been entered, the FULL

message will appear in the display window for a

moment and then a preset number will flash.

To change the preset number, follow the steps 5-6 as

above.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Functions

Sleep Timer Setup

You can set up the DVD/CD receiver to turn off auto-

matically at a specified time.

Selecting Input Sources

You can use a VCR or other devices connected to the

VIDEO1, VIDEO2 jacks or the Optical input. Refer to

the owner’s manual supplied with the device(s) for

further information on their operation.

Press SLEEP to set up a sleep time.

The SLEEP indicator and sleep time appears in the dis-

Press AUX repeatedly on the remote control to

select the desired input source.

Each time you press this button, the sources change in

play window.

Each time you press SLEEP the setting changes

in the following order.

the following sequence:

SLEEP 90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →

ꢀ VIDEO 1: for selecting the analog signal from VIDEO1

AUDIO IN (L/R) & VIDEO IN jacks.

OFF

ꢀ VIDEO 1 OPT: for selecting the digital signal from VIDEO 1

OPTICAL IN jack.

ote

ꢀ You can check the time remaining before the

DVD/CD receiver turns off.

Press SLEEP. The remaining time appears in the

display window.

ꢀ VIDEO 2: for selecting the analog signal from VIDEO2

AUDIO IN (L/R) & VIDEO IN jacks.

ꢀ VIDEO2 OPT: for selecting the digital signal from VIDEO 2

OPTICAL IN jack.

Dimmer

This function changes the brightness of the display win-

dow on the front panel during power-on status.

otes

Press DIMMER repeatedly.

ꢀ The Optical input function is available only when the

other unit’s Sampling Frequency is 32 ~ 96kHz.

ꢀ You can also select the input source with the

PLAY/FUNCTION button on the front panel.

Press and hold down this button about 3 seconds,

then press repeatedly to select other input source.

Mute

Press MUTE to remove the sound.

You can mute your unit in order, for example, to answer

the telephone, “MUTE” indicator flashes in the display

window.

Press MUTE again to restore the sound.

Using Headphones

Connect a stereo headphone plug ( 3.5mm) into the

PHONES input jack.

The speakers are automatically disconnected when you

plug in a headphone (not supplied).

Download from Www.Somanuals.com. All Manuals Search And Download.

Language Code List

Enter the appropriate code number for the initial settings “Disc Audio”, “Disc Subtitle” and/or “Disc Menu”

(See page 20).

Code Language

6566

6565

6570

8381

6577

6582

7289

6583

6588

6590

6665

6985

6678

6890

6672

6682

6671

7789

6669

7577

6765

9072

6779

7282

6783

6865

7876

6978

6979

6984

7079

Abkhazian

Afar

7074

7073

7082

7089

7176

7565

6869

6976

7576

7178

7185

7265

7387

7273

7285

7383

7378

7365

7165

7384

7465

7487

7578

7583

7575

7589

7579

7585

7679

7665

7686

Fiji

7678

7684

7775

7771

7783

7776

7784

7773

7782

7779

7778

7865

7869

7879

7982

8065

8083

7065

8076

8084

8185

8277

8279

8285

8377

8365

7168

8382

8372

8378

8368

Lingala

8373

8375

8376

8379

6983

8385

8387

8386

8476

8471

8465

8484

8469

8472

6679

8473

8479

8482

8475

8487

8575

8582

8590

8673

8679

6789

8779

8872

7473

8979

9085

Singhalese

Slovak

Slovenian

Somali

Spanish

Sudanese

Swahili

Swedish

Tagalog

Tajik

Finnish

Lithuanian

Macedonian

Malagasy

Malay

Afrikaans

Albanian

Ameharic

Arabic

French

Frisian

Galician

Georgian

German

Greek

Malayalam

Maltese

Armenian

Assamese

Aymara

Maori

Greenlandic

Guarani

Gujarati

Hausa

Marathi

Azerbaijani

Bashkir

Moldavian

Mongolian

Nauru

Tamil

Basque

Tatar

Bengali; Bangla

Bhutani

Hebrew

Hindi

Nepali

Telugu

Thai

Norwegian

Oriya

Bihari

Hungarian

Icelandic

Indonesian

Interlingua

Irish

Tibetan

Tigrinya

Tonga

Breton

Panjabi

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Pashto, Pushto

Persian

Turkish

Turkmen

Twi

Polish

Italian

Portuguese

Quechua

Rhaeto-Romance

Rumanian

Russian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kirghiz

Ukrainian

Urdu

Chinese

Corsican

Croatian

Czech

Uzbek

Vietnamese

Volapük

Welsh

Samoan

Sanskrit

Danish

Dutch

Korean

Scots Gaelic

Serbian

Wolof

English

Kurdish

Laothian

Latin

Xhosa

Esperanto

Estonian

Faroese

Serbo-Croatian

Shona

Yiddish

Yoruba

Zulu

Latvian, Lettish

Sindhi

Download from Www.Somanuals.com. All Manuals Search And Download.

Country Code List

Enter the appropriate code number for the initial setting “Country Code” (See page 22).

Code Country

Andorra

Eritrea

Spain

Ethiopia

Finland

Saint Lucia

Liechtenstein

Sri Lanka

Liberia

Lesotho

Lithuania

Luxembourg

Latvia

Libya

Morocco

Monaco

Seychelles

Sudan

Sweden

Singapore

Saint Helena

Slovenia

Svalbard and Jan Mayen

Islands

Slovak Republic

Sierra Leone

San Marino

Senegal

Somalia

Suriname

Saint Tome and Principe

Former USSR

El Salvador

Syria

Swaziland

Turks and Caicos Islands

Chad

French Southern

Territories

Togo

Thailand

Tadjikistan

Tokelau

Turkmenistan

Tunisia

Tonga

East Timor

Turkey

Trinidad and Tobago

Tuvalu

Taiwan

Tanzania

United Arab Emirates

Afghanistan

Antigua and Barbuda

Anguilla

Albania

Armenia

Netherlands Antilles

Angola

Antarctica

Argentina

American Samoa

Austria

Australia

Fiji

Falkland Islands

Micronesia

Faroe Islands

France

France (European

Territory)

Gabon

Great Britain

Grenada

Georgia

French Guyana

Ghana

Gibraltar

Greenland

Gambia

Moldavia

Madagascar

Marshall Islands

Macedonia

Mali

Myanmar

Mongolia

Aruba

Azerbaidjan

Bosnia-Herzegovina

Barbados

Bangladesh

Belgium

Burkina Faso

Bulgaria

Bahrain

Burundi

Benin

Bermuda

Brunei Darussalam

Bolivia

Brazil

Bahamas

Bhutan

Bouvet Island

Botswana

Belarus

Belize

Canada

Cocos (Keeling) Islands

Central African Republic

Congo

Switzerland

Ivory Coast

Cook Islands

Chile

Cameroon

China

Colombia

Costa Rica

Former Czechoslovakia

Cuba

Cape Verde

Christmas Island

Cyprus

Czech Republic

Germany

Djibouti

Denmark

Dominica

Dominican Republic

Algeria

Ecuador

Estonia

Egypt

Western Sahara

Macau

Northern Mariana Islands

Martinique (French)

Mauritania

Montserrat

Malta

Guinea

Guadeloupe (French)

Equatorial Guinea

Greece

S. Georgia & S. Sandwich

Isls.

Guatemala

Guam (USA)

Guinea Bissau

Guyana

Hong Kong

Heard and McDonald

Islands

Honduras

Croatia

Haiti

Hungary

Indonesia

Ireland

Israel

India

British Indian Ocean

Territory

Iraq

Iran

Iceland

Italy

Jamaica

Mauritius

Maldives

MW Malawi

Mexico

Malaysia

Mozambique

Namibia

New Caledonia (French)

Niger

Norfolk Island

Nigeria

Nicaragua

Netherlands

Norway

Nepal

Nauru

Niue

New Zealand

Oman

Panama

Peru

Polynesia (French)

Papua New Guinea

Philippines

Pakistan

Ukraine

Uganda

United Kingdom

USA Minor Outlying

Islands

United States

Uruguay

Uzbekistan

Vatican City State

Saint Vincent &

Grenadines

Venezuela

Virgin Islands (British)

Virgin Islands (USA)

Vietnam

Vanuatu

Wallis and Futuna Islands

Samoa

Yemen

Mayotte

Yugoslavia

South Africa

Zambia

Zaire

Zimbabwe

Jordan

Japan

Kenya

Poland

Saint Pierre and Miquelon

Pitcairn Island

Puerto Rico

Portugal

Palau

Paraguay

Qatar

Reunion (French)

Romania

Russian Federation

Rwanda

Saudi Arabia

Solomon Islands

Kyrgyzstan

Cambodia6

Kiribati

Comoros

Saint Kitts & Nevis Anguilla

North Korea

South Korea

Kuwait

Cayman Islands

Kazakhstan

Laos

Lebanon

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

Check the following guide for the possible cause of a problem before contacting service.

Cause

Correction

Symptom

No power.

• The power cord is disconnected.

• Plug the power cord securely into the

wall outlet.

• No disc is inserted.

• Insert a disc. (Check that the DVD or,

audio CD indicator in the DVD display is

lit.)

The power is on, but

the DVD/CD receiver

does not work.

• The TV is not set to receive DVD signal • Select the appropriate video input mode

No picture.

output.

on the TV so the picture from the DVD/

CD receiver appears on the TV screen.

• The video cable is not connected

securely.

• Connect the video cable into the jacks

securely.

• The connected TV power is turned off.

• Turn on the TV.

• The equipment connected with the

audio cable is not set to receive DVD

signal output.

• Select the correct input mode of the

audio receiver so you can hear the

sound from the DVD/CD receiver.

There is no sound or

only a very low-level

sound is heard.

• The audio cables are not connected

securely.

• Connect the audio cable into the jacks

securely.

• The power of the equipment connected

with the audio cable is turned off.

• Turn on the equipment connected with

the audio cable.

• The audio connecting cable is damaged.

• The disc is dirty.

• Replace it with new one.

• Clean the disc.

The playback picture is poor.

• No disc is inserted.

• Insert a disc. (Check that the DVD, or

audio CD indicator in the DVD display is

lit.)

The DVD/CD receiver

does not start playback.

• An unplayable disc is inserted.

• Insert a playable disc. (Check the disc

type, colour system and Regional code.)

• The disc is placed upside down.

• The disc is not placed within the guide.

• Place the disc with the playback side

down.

• Place the disc on the disc tray correctly

inside the guide.

• The disc is dirty.

• Clean the disc.

• A menu is on the TV screen.

• Press the SETUP button to turn off the

menu screen.

• The Rating level is set.

• The plugs and jacks are dirty.

• The disc is dirty.

• Cancel the Rating function or change

the rating level.

• Wipe them with a cloth slightly mois-

tened with alcohol.

Loud hum or noise is

heard.

• Clean the disc.

• The speakers and components are

connected poorly.

• Connect the speakers and components

securely.

• The DVD/CD receiver is located too

close to the TV.

• Move your TV away from the audio

components.

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting (Cont’d)

Cause

Correction

Symptom

• The antenna is positioned or connected

poorly.

• Connect the antenna securely.

Radio stations cannot

be tuned in.

• Adjust the antennas and connect an

external antenna if necessary.

• The signal strength of the stations is too

weak (when tuning in with automatic

tuning).

• Tune in the station manually.

• No stations have been preset or preset

stations have been cleared (when

tuning by scanning preset stations).

• Preset the stations (page 32).

• The remote control is not pointed at the • Point the remote control at the remote

The remote control

does not work properly.

remote sensor of the DVD/CD receiver.

sensor of the DVD/CD receiver.

• The remote control is too far from the

DVD/CD receiver.

• Use the remote control within about 23

ft (7 m).

• There is an obstacle in the path of the

remote control and the DVD/CD

receiver.

• Remove the obstacle.

• The batteries in the remote control are

flat.

• Replace the batteries with new ones.

• The system cannot change while play-

ing a MP3 or WMA disc.

The sound mode or Pro

Logic II mode cannot

be changed.

• Insert such a CD disc.

• Nothing is displayed on the front panel

display.

The front panel display

is too dim.

• Press DIMMER on the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specification

Power supply

Power consumption

Mass

Refer to main label (labeled at the bottom cover)

5.9 kg

External dimensions (W x H x D) 360 x 82 x 344 mm

Operating conditions

Operating humidity

Laser

Temperature: 5°C to 35°C, Operation status: Horizontal

5% to 85%

Semiconductor laser, wavelength 650 nm

PAL 625/50, NTSC 525/60

Signal system

Frequency response (audio)

Signal-to-noise ratio (audio)

Dynamic range (audio)

Harmonic distortion (audio)

Video input

150 Hz to 18 kHz

More than 70 dB (1 kHz, NOP, 20 kHz LPF/A-Filter)

More than 70 dB

0.5 % (1 kHz, at 12W position) (20 kHz LPF/A-Filter)

1.0 V (p-p), 75 Ω, negative sync., RCA jack x 2

1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1

(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1

Video output

S-video output

Component Video output

(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1

(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1

87.5 - 108.0 MHz

Tuning Range

Intermediate Frequency

Signal-to Noise Ratio

Frequency Response

Tuning Range

10.7 MHz

60 dB (Mono)

150 - 8,000 Hz

530 - 1,720 kHz

Intermediate Frequency

Stereo mode

Surround mode

(* Depending on the sound mode

settings and the source, there

may be no sound output.)

450 kHz

70W + 70W (8Ω at 1 kHz, THD 10 %)

Front: 70W + 70W (THD 10 %)

Centre*: 70W

Surround*: 70W + 70W (8Ω at 1 kHz, THD 10 %)

Subwoofer*: 100W (4Ω at 30 Hz, THD 10 %)

VIDEO 1, VIDEO 2, OPTICAL AUDIO

VIDEO 1 (AUDIO OUT) : 2 V

PHONES: (32 Ω, 0.8 V)

Inputs

Outputs

OPTICAL AUDIO

Transmission Output : 2.4GHz, Power Supply : DC 7V

Reception Output : 2.4GHz,

Transmitter (ACC-W6100)

Wireless Speaker

FA-W6100SR/SL

2 Way 3 Speaker

110 - 40000 Hz

83 dB/W (1m)

50W

100W

270x1150x270 mm

5.1 kg

Front Speaker

FE-6100TE

2 Way 3 Speaker

110 - 40000 Hz

83 dB/W (1m)

50W

100W

270x1150x270 mm

4.78 kg

Center Speaker

FE-6100CVE

2 Way 3 Speaker 1 Way 1 Speaker

110 - 40000 Hz

83 dB/W (1m)

50W

100W

329x117x90 mm

0.92 kg

Subwoofer

FE-6100WE

Type

Frequency Response

Sound Pressure Level

Rated Input Power

Max. Input Power

Net Dimensions (W x H x D)

Net Weight

40 - 15000 Hz

82 dB/W (1m)

100W

200W

350x326x350 mm

7.2 kg

• Audio cable . . . . . . . . . . . . . . . . . . . . . . . . .1

• Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . .6

• Remote control . . . . . . . . . . . . . . . . . . . . . .1

• AM loop antenna . . . . . . . . . . . . . . . . . . . . .1

• Video cable . . . . . . . . . . . . . . . . . . . . . . . . .1

• Speaker cables . . . . . . . . . . . . . . . . . . . . . .5

• Batteries (AAA) . . . . . . . . . . . . . . . . . . . . . . .2

• FM antenna . . . . . . . . . . . . . . . . . . . . . . . . .1

❋ Designs and specifications are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

Download from Www.Somanuals.com. All Manuals Search And Download.

P/N: 3828R-D038B

Download from Www.Somanuals.com. All Manuals Search And Download.

Lenovo Personal Computer 1654 User Manual
Leviton Network Card RZC0P 1LW User Manual
LG Electronics Microwave Oven MB 387W User Manual
Lightolier Indoor Furnishings 1000AICM User Manual
Makita Impact Driver BTD134 User Manual
M Audio Door IE 10 User Manual
Maytag Double Oven MER6555AAB Q W User Manual
Maytag Washer MAV7357AWQ User Manual
Metra Electronics Computer Drive 99 7511S User Manual
Middleby Cooking Systems Group Oven OP 4 8M User Manual