LG Electronics Home Theater System FBS162V User Manual

FB162_A0U_JA1ULL5  
Mini Home Theater  
OWNER’S MANUAL  
MODEL: LFD750  
LFD750  
FBS162V  
Before connecting, operating or adjusting this product,  
please read this instruction booklet carefully and completely.  
For service/  
support Call:  
Toll Free Number  
1-800-243-0000  
© Copyright 2007, LG Electronics U.S.A., Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND  
CAUTION:  
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or  
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for  
installation, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER  
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and  
operating instructions should be read before the product  
is operated.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the  
apparatus.  
2. Keep these instructions. - The safety, operating and  
use instructions should be retained for future reference.  
11. Only use attachments/accessories specified by the  
manufacturer.  
3. Heed all warnings. - All warnings on the product and in  
the operating instructions should be adhered to.  
12. Use only with the cart, stand, tripod, bracket, or  
table specified by the manufacturer, or sold with  
the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to  
avoid injury from tip-over.  
4. Follow all instructions. - All operating and use  
instructions should be followed.  
5. Do not use this apparatus near water. – For example:  
near a bath tub, wash bowl, kitchen sink, laundry tub, in  
a wet basement; or near a swimming pool; and other  
areas located near water.  
6. Clean only with dry cloth. – Unplug this product from  
the wall outlet before cleaning. Do not use liquid  
cleaners.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer's instructions. - Slots  
and openings in the cabinet are provided for ventilation  
and to ensure reliable operation of the product and to  
protect it from over-heating. The openings should never  
be blocked by placing the product on a bed, sofa, rug or  
other similar surface. This product should not be placed  
in a built-in installation such as a bookcase or rack  
unless proper ventilation is provided or the  
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has  
been exposed to rain or moisture, does not operate  
normally, or has been dropped.  
manufacturer’s instructions have been adhered to.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The  
wide blade or the third prong are provided for your  
safety. If the provided plug does not fit into your  
outlet, consult an electrician for replacement of the  
obsolete outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Maintenance and Service  
Maintenance and Service . . . . . . . . . . . . . . . . . .4  
Before use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Front Panel/Back Panel . . . . . . . . . . . . . . . . . . . .6  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Refer to the information in this chapter before  
contacting a service technician.  
Handling the unit  
When shipping the unit  
Installation and Setup  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Antenna (Aerial) Connections . . . . . . . . . . . . . .8  
Auxiliary Function . . . . . . . . . . . . . . . . . . . . . . . .9  
Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . .9  
To Adjust ECHO Volume . . . . . . . . . . . . . . . . . . .9  
Using Microphone . . . . . . . . . . . . . . . . . . . . . . . .9  
iPod connection . . . . . . . . . . . . . . . . . . . . . . . . . .9  
USB Function . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Compatible Devices . . . . . . . . . . . . . . . . . . . . . .10  
Speaker System Connection . . . . . . . . . . . . . .10  
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . .11  
Timer Function . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Sleep Timer Function . . . . . . . . . . . . . . . . . . . . .11  
Displaying Disc Information on-screen . . . . . .12  
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
General Operation . . . . . . . . . . . . . . . . . . . . . . .12  
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Lock (Parental Control) . . . . . . . . . . . . . . . . . .14  
Others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Keeping the exterior surfaces clean  
• Do not use volatile liquids such as insecticide spray  
near the unit.  
• Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the  
surfaces are extremely dirty, use a soft cloth lightly  
moistened with a mild detergent solution.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
Maintaining the Unit  
The unit is a high-tech, precision device. If the optical  
pick-up lens and disc drive parts are dirty or worn, the  
picture quality could be diminished.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
For details, please contact your nearest authorized  
service center.  
Operation  
General features . . . . . . . . . . . . . . . . . . . . . . . . .16  
Additional features . . . . . . . . . . . . . . . . . . . . . . .17  
Playing an Audio CD or MP3/WMA file . . . . . .18  
Programmed Playback . . . . . . . . . . . . . . . . . . .18  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . . . . .19  
Playing a DivX Movie file . . . . . . . . . . . . . . . . . .20  
Using iPod . . . . . . . . . . . . . . . . . . . . . . . . . . .21-22  
Presetting the Radio Stations . . . . . . . . . . . . . .23  
Listening to the Radio . . . . . . . . . . . . . . . . . . . .23  
Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
EQUALIZER Effect . . . . . . . . . . . . . . . . . . . . . . .24  
DEMO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
DISPLAY MODE . . . . . . . . . . . . . . . . . . . . . . . . .24  
XDSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
MP3 Optimizer . . . . . . . . . . . . . . . . . . . . . . . . . .24  
XTS Pro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
VIRTUAL sound . . . . . . . . . . . . . . . . . . . . . . . . .24  
The manual largely contains detailed explanation  
items about how to operate the unit with the  
Remote Control.  
Precautions in using the touch buttons  
Use the touch buttons with clean and dry hands.  
- In a humid environment, wipe out any moisture on  
the touch buttons before using.  
Do not press the touch buttons hard to make it work.  
- If you apply too much strength, it can damage the  
sensor of the touch buttons.  
REFERENCE  
Touch the button that you want to work in order to  
operate the function correctly.  
Language Codes . . . . . . . . . . . . . . . . . . . . . . . .25  
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .26-27  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Be careful not to have any conductive material such  
as metallic object on the touch buttons. It can cause  
malfunctions.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Types of Playable Discs  
DVD  
Before use  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain it for future  
reference.  
This manual provides information on the operation  
and maintenance of your unit. Should the unit require  
service, contact an authorized service location.  
(8 cm / 12 cm disc)  
Audio CD  
(8 cm / 12 cm disc)  
In addition, this unit can play a DVD±R/RW, and CD-R  
or CD-RW that contains audio titles, MP3, WMA,  
JPEG or DivX files.  
About the  
Symbol Display  
Note:  
” may appear on your TV display during  
• Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD±R/RW) disc  
itself, some CD-R/RW (or DVD±R/RW) discs may  
not be played on the unit.  
• Do not attach any seal or label to either side (the  
labeled side or the recorded side) of a disc.  
operation and indicates that the function explained in  
this owner’s manual is not available on that specific  
DVD video disc.  
Symbol Used in this Manual  
Note:  
Indicates special notes and operating features.  
Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal). It may result in malfunctions.  
Tip:  
Indicates tips and hints for making the task easier.  
Regional Code  
This unit has a regional code printed on the bottom of  
the unit. This unit can play only DVD discs labelled as  
the same as the rear of the unit or “ALL”.  
Note on Regional Codes  
A section whose title has one of the following symbols  
is applicable only to the disc represented by the  
symbol.  
Indicates hazards likely to cause harm to the  
unit itself or other material damage.  
• Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your DVD player’s regional  
code or the disc cannot play.  
• If you try to play a DVD with a different regional  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
DVD-V  
DVD and finalized DVD±R/RW  
ACD  
Audio CDs  
MP3  
WMA  
JPEG  
DivX  
MP3 files  
WMA files  
JPEG files  
DivX files  
Manufactured under license from Dolby Laboratories.  
“Dolby”, “Pro Logic”, and the double-D symbol are  
trademarks of Dolby Laboratories. Confidential Unpublished  
works. Copyright 1992-1997 Dolby Laboratories. All rights  
reserved.  
POWER SAVE MODE  
You can set up the unit into an economic power save  
mode.  
In power-on status, press and hold (POWER)  
1
button for about 3 seconds.  
- Nothing is displayed in the display window when  
the unit goes into the power save mode.  
To cance power save mode, press (POWER).  
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel/ Back Panel  
20  
1
19  
2
3
18  
17  
21  
22  
23  
26  
4
16  
15  
5
6
7
25  
24  
OPEN  
8
14  
13  
MIC1  
MIC2  
9
10  
11  
12  
21. Antenna terminal  
1.  
(POWER)  
1
2. VOLUME*  
22. AUX IN (Auxiliary input) connector  
23. COMPONENT VIDEO OUT  
3. FUNC. (FUNCTION)  
(FM, AM, DVD/CD, USB, AUX, OSD iPod)  
(PROGRESSIVE SCAN) connector (Y Pb Pr)  
24. VIDEO OUT Jack  
25. iPod connector  
26. Speaker terminal  
4. .(SKIP)  
TUN. (-) (TUNER)  
5. XTS pro  
6.  
(STOP)  
x
MO./ ST. (MONO/ STEREO)  
*VOLUME Adjustment  
7. DISC TRAY  
Move your finger around the touch  
wheel.  
8. EQ master/ DEMO button  
9. CLOCK button  
10. TIMER button  
11. SET button  
12. PHONES  
(Headphone jack : 3.5mm)  
13. MIC1/ MIC2 (MIC Jacks)  
14.  
USB connector  
15. Z (OPEN/CLOSE)  
16. > (SKIP)  
TUN. (+) (TUNER)  
17. XDSS plus / (MP3 Optimizer)  
18.  
/
B
(PLAY/PAUSE)  
[]  
19. Display window  
20. Power cord  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1. POWER button  
2. FUNCTION SELECT buttons  
(TUNER/ BAND,DVD, AUX, USB)  
3. NUMERIC buttons (0-9)  
4. EQ master, XDSS plus, XTS Pro, VSM buttons  
5. SETUP button  
1
2
22  
iPod  
6. • ARROW buttons (v / V / b / B )  
21  
20  
(Selects an option in the menu.)  
• PRESET (-/+) buttons (v / V )  
• TUN. (-/+) buttons (b / B)  
7. SELECT/ ENTER button  
8. MENU button  
3
4
5
(Use the MENU button to display the menu screen  
included on DVD video discs.)  
9. PROG./MEMO. button  
19  
18  
10. REPEAT button  
11. REPEAT A-B button  
12. • SCAN (  
) buttons  
FF/GG  
• SLOW (t/T) buttons  
• SKIP (./>) buttons  
• STOP (x)/MO.ST. button  
• PAUSE([])/ STEP button  
6
7
17  
16  
8
• PLAY ( ) button  
G
13. • DIMMER button  
• DISP.MODE button  
9
14. ECHO VOL. (  
15. • CLEAR button  
• ZOOM button  
/
), MIC VOL. (  
/
) buttons  
10  
11  
12  
• MARKER, SEARCH buttons  
16. VOLUME -/+ buttons  
17. TITLE button  
(Use the TITLE button to display the title screen  
included on DVD video discs.)  
18. DISPLAY button  
15  
14  
13  
19. • SOUND MODE button  
• AUDIO ( ) button  
• SUBTITLE ( ) button  
• RETURN ( ) button - optional  
20. SLEEP button  
21. iPod button  
22. MUTE ( )button  
Remote Control Operation Range  
Remote Control battery installation  
Point the Remote Control at the Remote Sensor and press  
the buttons.  
Remove the battery cover on the rear of  
the Remote Control, and insert two R03  
Distance: About 23 ft (7 m) from the front of the Remote  
(size AAA) batteries with  
aligned correctly.  
and  
Sensor  
Angle: About 30° in each direction in front of the Remote  
Sensor  
Caution  
Do not mix old and new batteries. Never mix different  
types of batteries (standard, alkaline, etc.).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation and Setup  
TV Connection  
Antenna (Aerial) Connections  
Connect the supplied FM/AM antennas for listening to  
the radio.  
Make one of the following connections, depending on  
the capabilities of your existing equipment.  
Note:  
Tip:  
To prevent noise pickup, keep the AM loop antenna  
away from the unit and other components.  
• Be sure to fully extend the FM wire antenna.  
• After connecting the FM wire antenna, keep it as  
horizontal as possible.  
• Depending on your TV and other equipment you  
wish to connect, there are various ways you could  
connect the unit. Use one of the connections  
described below.  
• Please refer to the manuals of your TV, VCR,  
Stereo System or other devices as necessary to  
make the best connections.  
FM wire antenna (supplied)  
Caution:  
Make sure the unit is connected directly to the TV.  
Select the correct AV input on your TV.  
• Do not connect your unit to the TV via your VCR.  
The DVD image could be distorted by the copy  
protection system.  
Video connection  
Connect the VIDEO OUT jack from the unit to the  
VIDEO IN jack on the TV using the video cable  
supplied (V).  
AM(MW) loop antenna  
(aerial) (supplied)  
Component Video connection  
Connect the COMPONENT VIDEO OUT jacks from  
the unit to the corresponding jacks on the TV using a  
Y Pb Pr cable (C).  
For AM(MW) reception,connect  
the loop antenna (aerial) to the  
terminal marked AM  
Rear of TV  
VIDEO  
INPUT  
COMPONENT VIDEO  
PROGRESSIVE SCAN INPUT  
/
Y
Pb  
Pr  
L
V
C
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auxiliary Function  
Using Microphone  
Connect an auxiliary device such as a TV or VCR via  
the rear mounted AUX connector and press AUX [Refer  
to the example image(1) shown below].  
You can sing to a music source by connecting a  
microphone to the unit.  
1. Connect your microphone to the MIC1/ MIC 2  
Jacks.  
When you connect each end of the bundled portable in  
cable with both the AUX connector and the headphone  
jack of a portable device (like MP3 player, cassette tape  
player, CD player, etc.), you can hear the sound of the  
device through the speakers [Refer to the example  
image(2) shown below].  
” will be shown in the display window.  
2. Play a music you want.  
3. Sing along with the accompaniment.  
Adjust the microphone volume by pressing MIC  
VOL. button.(MIN,1 - 14, MAX steps)  
Note:  
• When not using the microphone, set the MIC VOL. to  
minimum or turn off the MICs and remove the  
microphone from the MIC Jacks.  
• If the microphone is set too near the speaker, a  
howling sound may be produced. In this case, move  
the microphone away from the speaker or decrease  
the sound level by using MIC VOL..  
Example (1)  
To AUDIO in  
Auxiliary Device  
• If sound through the microphone is extremely loud, it  
may be distorted. In this case, decrese MIC volume.  
iPod connection  
Connect the iPod connector on the rear of the unit to  
the dock connector of iPod using an iPod cable (I).  
To AUDIO out  
Example (2)  
Portable in cable  
iPod  
I
MENU  
Portable Device  
Note:  
Note:  
Turn the unit off and then connect an auxiliary device  
before you connect an auxiliary device.  
Because it may be made a noise.  
Depending on the type of iPod, you may need to  
insert one of the dock adapters into the dock slot  
before you station your iPod.  
Adjust the volume to a moderate level before you  
connect your iPod and this unit.  
Headphone Jack  
Connect a stereo headphone plug ( 3.5mm) into the  
headphone jack.  
The speakers are automatically disconnected when you  
plug in the headphones (not supplied).  
To Adjust ECHO Volume  
You can give an echo effect to the sound from the  
microphones.  
Press ECHO VOL. (  
/
) on the Remote Control to  
increase the echo volume or decrease it.  
(MIN,1 - 14, MAX steps)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB Function  
Speaker System Connection  
Connect the speaker wires cables to the speaker  
terminals.  
You can enjoy the media files such as tunes  
(MP3/WMA/PHOTO/VIDEO file) saved in an MP3  
player or USB memory by connecting the storage  
device to the USB port of this unit.  
Note:  
• Be sure to match the speaker wire to the  
appropriate terminal on the components: + to + and  
– to –. If the cords are reversed, the sound will be  
distorted and will lack bass.  
• Connect the Left/ Right speaker correctly. If it  
reversed, the sound may be distorted.  
Compatible Devices  
1. Devices which require additional program  
installation when you have connected it to a  
computer, are not supported.  
2. MP3 Player : Flash type MP3 player.  
T
he MP3 player requiring installation of a driver  
Front  
speaker (R)  
Front  
speaker (L)  
is not supported.  
3. USB Flash Drive : Devices that support USB2.0 or  
USB1.1.  
To Remove the USB from the unit  
1. Choose the other functions except USB  
function in order to remove the USB.  
2. Remove the USB from the unit.  
Note:  
If you want to operate other functions, see the CD  
Playback section. Refer to the page 16, 17, and 18.  
Note:  
• Do not extract the USB device in operating.  
• A back up demands to prevent a data damage.  
• If you use a USB extension cable or USB hub, the  
USB device might not be recognized.  
• A device using NTFS file system is not supported.  
(Only FAT (16/32) file system is supported.)  
• The USB function of this unit does not support all  
USB devices.  
• Digital camera and mobile phone are not supported.  
• This unit is not supported when the total number of  
files is 1000 or more.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Press SET.  
Setting the Clock  
- “OFF TIME” indicator appears for about 0.5  
seconds in the display window and then  
disappears.  
1. Press CLOCK.  
2. Select a 24 hour time system or a 12 hour time  
system by tapping ./>.  
9. Set the hour to switch off by tapping ./> on  
the front panel.  
10. Press SET.  
11. Set the minute to switch off by tapping ./>  
on the front panel.  
(24HR)  
(12HR)  
or  
12. Press SET.  
3. Press SET to confirm the selected hour time  
system.  
13. Adjust the volume level by tapping ./> on  
the front panel.  
14. Press SET.  
4. Tap ./> on the front panel to set the correct  
hours.  
5. Press SET.  
6. Tap ./> on the front panel to set the correct  
minutes.  
appears in the display window and the timer  
setting has been completed.  
15. Switch the system off.  
The selected function is automatically switched on  
and off at the time set.  
7. Press SET and the correct time is shown on the  
display window.  
Note:  
8. Press CLOCK at any time to display the time for  
about 5 seconds.  
If you insert the DVD,VCD or DivX except audio  
CD/MP3/WMA on the unit, the timer function will be  
operated to the TUNER.  
Note:  
If you want to reset the clock, press and hold CLOCK  
for more than 2 seconds.  
To cancel or check the timer  
Each time the TIMER is pressed you can select the  
timer set or cancel. You can also check the timer  
setting status.  
To activate or check the timer, press the TIMER that  
Timer Function  
With the TIMER function, you can have the radio  
reception, CD play and USB play turned on and off at  
the desired time.  
1. Press CLOCK to check the current time.  
(If you don’t set clock, the timer function doesn’t  
work.)  
” appears in the display window.  
To cancel the TIMER, press the TIMER that “  
disappears in the display window.  
2. Press TIMER to enter the timer setting mode. If  
you want to correct the previous memorized  
TIMER setting, press and hold the TIMER for  
more than 2 seconds.  
Sleep Timer Function  
When the sleep timer is used, the power is  
automatically turned off after the specified time has  
elapsed.  
1. Press SLEEP to set the desired sleep time.  
The SLEEP indicator and sleep time appears in  
the display window.  
- The previously memorized timer on the time and  
” indicator appears in the display window.  
3. Each function (TUNER DVD/CD USB)  
flashes in the display window in turn. Press SET  
when the desired function is flashing.  
4. a. When you select the TUNER function, select  
the previously memorized preset number by  
tapping ./ > on the front panel and press  
SET.  
2. Each time you press SLEEP the setting changes  
in the following order.  
SLEEP 180  
60 50  
display)  
150  
30  
120  
90  
80  
70  
OFF (No  
40  
20  
10  
Note:  
- “ON TIME” indicator appears for about  
0.5 seconds in the display window and  
then disappears.  
If you press SLEEP while the sleep time is  
displayed, the SLEEP time is reset.  
b. When you select the DVD/CD or USB function,  
- “ON TIME” indicator appears for about 0.5  
seconds in the display window and then  
disappears.  
To cancel the sleep timer mode  
If you have to stop the function, press the SLEEP  
repeatedly until “SLEEP 10” appears, and then press  
SLEEP once again while “SLEEP 10” is displayed.  
5. Set the hour to switch on by tapping ./> on  
the front panel.  
6. Press SET.  
7. Set the minute to switch on by tapping ./>  
on the front panel.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GENERAL OPERATION  
Displaying Disc Information  
On - screen  
You can display various information about the disc  
1. Press SETUP. The Setup menu appears.  
2. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well as  
alternate setting(s).  
loaded on-screen.  
1. Press DISPLAY to show various playback  
information.  
3. Use v / V to select the second desired option and  
then press B to move to the third level.  
The displayed items differ depending on the disc  
type or playing status.  
4. Use v / V to select the desired setting then press  
SELECT/ENTER to confirm your selection. Some  
items require additional steps.  
2. You can select an item by pressing v / V and  
change or select the setting by pressing b / B.  
5. Press SETUP or PLAY to exit the Setup menu.  
Title (Track) – Current title (or track) number/  
total number of titles (or tracks).  
Chapter – Current chapter number/total number  
of chapters.  
LANGUAGE  
Time – Elapsed playing time.  
Audio – Selected audio language or channel.  
Subtitle – Selected subtitle.  
Angle – Selected angle/ total number of angles.  
Sound – Selected sound mode.  
Note:  
If any button is not pressed for a few seconds,  
the on-screen display disappears.  
OSD  
Select a language for the Setup menu and the on-  
screen display.  
Initial Settings  
By using the Setup menu, you can make various  
adjustments to items such as picture and sound. You  
can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see the pages 12 to 15.  
Disc Audio / Subtitle / Menu  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
Original – Refers to the original language in which  
the disc was recorded.  
To display and exit the Menu:  
Press SETUP to display the menu. A second press of  
SETUP will take you back to initial screen.  
Other To select another language, press  
numeric buttons and then  
SELECT/ENTER to enter the  
To go to the next level: Press B.  
corresponding 4-digit number according to  
the language code list on the page 25. If  
you enter the wrong language code, press  
CLEAR.  
To go back to the previous level: Press b.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Progressive Scan  
DISPLAY  
Progressive Scan Video provides the highest quality  
pictures with less flickering.  
If you are using the COMPONENT VIDEO OUT jacks,  
but are connecting the unit to a standard (analog)  
television, set Progressive Scan to Off.  
If you are using the Component Video jacks for  
connection to a TV or monitor that is compatible with  
a progressive scan signal, set Progressive Scan to  
On.  
To Turn ON progressive scan:  
TV Aspect  
Connect component out of the unit to the input of your  
monitor/television, set your television or monitor to  
Component Input.  
4:3 – Select when a standard 4:3 TV is connected.  
16:9 – Select when a 16:9 wide TV is connected.  
1. Select “Progressive Scan” on the DISPLAY menu  
then press B.  
Display Mode  
The display Mode setting works only when the TV  
Aspect mode is set to “4:3”.  
2. Select “On” using v / V.  
3. Pressing SELECT/ENTER will set the player to  
Progressive scan mode.  
Letterbox – Displays a wide picture with bands on  
the upper and lower portions of the  
screen.  
Panscan – Automatically displays the wide picture  
on the entire screen and cuts off the  
portions that do not fit.  
Caution:  
Once the setting for progressive scan output is  
entered, an image will only be visible on a progressive  
scan compatible TV or monitor. If you set Progressive  
Scan to On in error, you must reset the unit. First,  
remove the disc in the unit. Next, press STOP( x )  
and hold it for five seconds before releasing it. The  
video output will be restored to the standard setting,  
and a picture will once again be visible on a  
conventional analog TV or monitor.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Select a rating from 1 to 8 using v / V.  
AUDIO  
Rating 1-8: Rating one (1) has the most  
restrictions and rating eight (8) is the  
least restrictive.  
Each DVD disc has a variety of audio output options.  
Set the unit’s AUDIO options according to the type of  
audio system you use.  
Unlock: If you select unlock, parental control is  
not active and the disc plays in full.  
4. Press SELECT/ENTER to confirm your rating  
selection, then press SETUP to exit the menu.  
Password  
You can enter or change password.  
1. Select “Password” on the LOCK menu and then  
press B.  
Dynamic Range Control (DRC)  
2. Follow the step 2 as shown above (Rating).  
With the DVD*1 format, you can hear a program’s  
soundtrack in the most accurate and realistic  
presentation, thanks to digital audio technology.  
However, you may wish to compress the dynamic  
range of the audio output (the difference between the  
loudest sounds and the quietest ones). Then, you may  
listen to a movie at a lower volume without losing  
clarity of sound. Set DRC to On for this effect.  
*1:Dolby Digital only  
To change the password, press SELECT/ENTER  
when the “Change” option is highlighted. Input a  
password and press SELECT/ENTER. Enter it  
again and press SELECT/ENTER to verify.  
3. Press SETUP to exit the menu.  
If you forget your password  
If you forget your password, you can clear it using the  
following steps:  
Vocal  
1. Press SETUP to display the Setup menu.  
Set Vocal to On only when a multi-channel karaoke  
DVD is playing. The karaoke channels on the disc will  
mix into normal stereo sound.  
2. Input the 6-digit number “210499” and press  
SELECT/ENTER. The password is cleared.  
LOCK (Parental Control)  
Area Code  
Enter the code of the area whose standards were  
used to rate the DVD video disc, based on the list on  
page 25.  
US  
1. Select “Area Code” on the LOCK menu then  
press B.  
2. Follow step 2 as shown in rating section.  
3. Select the first character using v / V.  
Rating  
4. Press B and select the second character using  
v / V.  
Blocks playback of rated DVDs based on their  
contents. Not all discs are rated.  
5. Press SELECT/ENTER to confirm your Area code  
selection.  
1. Select “Rating” on the LOCK menu then  
press B.  
2. To access the LOCK options, you must input the  
password you have created. If you have not yet  
entered password, you are prompted to do so.  
Input a password and press SELECT/ENTER.  
Enter it again and press SELECT/ENTER to verify.  
If you make a mistake before pressing  
SELECT/ENTER, press CLEAR.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Semi Karaoke  
OTHERS  
When a chapter/ title / track is fully finished ,this  
function shows the score in the screen with a fanfare  
sound.  
on : Turn the “Semi Karaoke”function on.  
When you finished singing a score will appear  
on the screen.  
off : Turn the “ Semi Karaoke” function off.  
Fanfare and score do not appears on the  
screen  
DivX(R) Registration  
Available discs for the Semi Karaoke function:  
We provide you the DivX® VOD (Video On Demand)  
registration code that allows you to rent and purchase  
videos based on the DivX® VOD service. For more  
• DVD discs  
• DVD Karaoke Discs  
Note:  
1. Select “DivX(R) Registration” option and then  
press B.  
This function operate on the DVD/CD mode.  
The Semi Karaoke function is available only when a  
microphone is connected.  
Watching movies, “off” the Semi Karaoke or enjoy it  
without connecting the MIC at the SET UP menu if  
the fanfare or score appears during changing a  
chapter.  
2. Press SELECT/ENTER while “Select” is selected  
and the registration code will appear.  
Use the registration code to purchase or rent the  
videos from DivX® VOD service at  
download the video onto a disc for playback on  
this unit.  
3. Press SELECT/ENTER to exit.  
Note:  
All the downloaded videos from DivX® VOD can only  
be played back on this unit.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
General features  
Discs  
ALL  
Buttons  
Operations  
Z (OPEN / CLOSE)  
X (PAUSE)  
Opens or closes the disc tray.  
ALL  
During playback, press X to pause playback.  
Press X repeatedly to play Frame-by-Frame.  
DVD  
DivX  
SKIP (. / >)  
During playback, press SKIP (. or >) to go to the  
next chapter/track or to return to the beginning of the  
current chapter/track.  
ALL  
Press SKIP . twice briefly to step back to the previous  
chapter/track.  
DVD  
MP3  
DivX  
ACD  
SCAN (m / M)  
During playback, press SCAN (m or M) repeatedly to  
select the required scan speed.  
WMA  
DVD : bb, bbb, bbbb, bbbbb, bbbbbb or  
BB, BBB, BBBB, BBBBB, BBBBBB  
DivX disc : bb, bbb, bbbb, bbbbb or  
BB, BBB, BBBB, BBBBB  
WMA/MP3, Audio CD : m(X2, X4, X8) or M(X2, X4, X8)  
REPEAT  
REPEAT A-B  
ZOOM  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD Video discs: Chapter/Title/Off  
ACD  
DivX  
DVD  
MP3  
WMA  
Audio CD, DivX/MP3/WMA discs: Track/All/Off  
During playback, press REPEAT A-B to select a point A  
and a point B and repeats a sequence from point A  
(Starting point) to point B (End point).  
DVD  
DVD  
Press REPEAT A-B to exit.  
During playback or in the pause mode, press ZOOM to  
the video image (3 steps).  
You can move through the zoomed picture using b B v  
V.  
TITLE  
If the current DVD title has a menu, the title menu  
appears on the screen. Otherwise, the disc menu may  
appear.  
DVD  
MENU  
The disc menu appears on the screen.  
DVD  
DVD  
DivX  
DivX  
(SUBTITLE)  
During playback, press SUBTITLE repeatedly to select a  
desired subtitle language.  
DVD  
DVD  
(AUDIO language) During playback, press AUDIO repeatedly to hear a  
different audio language or audio track.  
In the pause mode, press SLOW (t or T) to select  
required speed.  
DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16)  
SLOW  
Note on general features:  
• Zoom may not work on some DVDs.  
• The A-B repeat function is available only in the current title.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Last Scene Memory DVD  
Additional features  
This unit memorizes the last scene from the last disc  
that is viewed. The last scene remains in the memory  
even if you remove the disc from the unit or switch off  
the unit. If you load a disc that has the scene  
Time Search DVD  
DivX  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
memorized, the scene is automatically recalled.  
2. Press v / V to select the time clock icon and  
“--:--:--” appears.  
Note:  
This unit does not memorize the scene of a disc if you switch  
3. Input the required start time in hours, minutes, and  
seconds from left to right. If you enter the wrong  
numbers, press CLEAR to remove the numbers  
you entered. Then input the correct numbers.  
off the unit before commencing to play the disc.  
1.5 speed playback  
DVD  
MP3  
ACD  
WMA  
4. Press SELECT/ENTER to confirm. Playback starts  
from the selected time.  
You can quickly enjoy a movie and music.  
The 1.5 speed allows you to watch the pictures and  
listen to the sound quicker than playing at a normal  
speed on the disc.  
Marker Search DVD  
To enter a Marker  
DivX  
1. Press PLAY during the normal playback. The  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears on  
the TV screen briefly. Repeat to enter up to nine  
markers.  
screen will appear at 1.5 speed with sound .  
2. To return to normal PLAY, press PLAY.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The marker  
search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press SELECT/ENTER and playback starts from  
the marked scene. Or press CLEAR and the  
marker number is erased from the list.  
4. You can play any marker by inputting its number  
on the marker search menu.  
Screen Saver  
The screen saver appears when you leave the unit in  
Stop mode for about five minutes.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an Audio CD or MP3/WMA  
file  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the unit memory. A  
program can contain 300 tracks.  
This unit can play Audio CDs or MP3/WMA files.  
MP3/ WMA/ Audio CD  
Once you insert a cd with MP3/WMA files or Audio, a  
menu appears on the TV screen.  
1. Insert a disc.  
Audio CD and MP3/WMA discs:  
2. Select a track on the “List”, and then press  
Press v / V to select a track/file and then press PLAY  
or SELECT/ENTER, and playback starts. You can use  
variable playback functions. Refer to the page 16, 17.  
PROG.MEMO. or select “  
(Add)” icon and then  
press SELECT/ENTER to place the selected track  
on the “Program” list. Repeat to place additional  
tracks on the list.  
ID3 TAG  
When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY repeatedly. The information [ Folder and file  
name, Song, Artist, Album, Genre, Comment, Time  
information ] of the MP3/WMA file will be shown in the  
display window and TV screen.  
Note:  
You can add all tracks in the disc. Select “  
then press SELECT/ENTER.  
Add All)” icon  
(
3. Select the track you want to start playing on the  
“Program” list. Press MENU to move to the next  
page.  
To move next or previous files, press the SKIP (. /  
>) button.  
Tip:  
4. Press PLAY or SELECT/ENTER to start. Playback  
begins in the order in which you programmed the  
tracks. Playback stops after all of the tracks on the  
“Program” list have played once.  
• Press MENU to move to the next page.  
• On a CD with MP3/WMA and JPEG, you can switch  
MP3/WMA and JPEG. Press TITLE, and MUSIC or  
PHOTO top of the menu is highlighted.  
5. To resume normal playback from programmed  
playback, select a track of AUDIO CD (or  
MP3/WMA) list and then press PLAY.  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
Repeat Programmed Tracks  
Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)  
The unit cannot read an MP3/WMA file that has a file  
extension other than “.mp3” / “.wma”.  
1. Press REPEAT when playing a disc. The repeat  
icon appears.  
CD-R physical format should be ISO 9660  
If you record MP3 / WMA files using software that  
cannot create a file system (eg. Direct-CD) it is  
impossible to playback MP3 / WMA files.We recommend  
that you use Easy-CD Creator, which creates an ISO  
9660 file system.  
File names should have a maximum of 8 letters and  
must incorporate an .mp3 or .wma extension.  
They should not contain special letters such as / ? * : “  
< > l etc.  
2. Press REPEAT to select a desired repeat mode.  
• TRACK: repeats the current track  
• ALL: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
Erasing a Track from “Program” List  
1. Use v V to select the track that you wish to erase  
from the Program list.  
2. Press CLEAR. Alternatively, select “  
(Delete)”  
The total number of files on the disc should be less than  
999.  
icon then press SELECT/ENTER to place the  
selected track on the Program list. Repeat to  
erase additional tracks on the list.  
This unit requires discs and recordings to meet certain  
technical standards in order to achieve optimal playback  
quality. Pre-recorded DVDs are automatically set to these  
standards. There are many different types of recordable  
disc formats (including CD-R containing MP3 or WMA files)  
and these require certain pre-existing conditions (see  
above) to ensure compatible playback.  
Erasing the Complete Program List  
Use v / V to select “  
(Del all)” and then press  
SELECT/ENTER.  
Customers should note that permission is required in  
order to download MP3 / WMA files and music from the  
Internet. Our company has no right to grant such  
permission. Permission should always be sought from  
the copyright owner.  
Note:  
The programs are also cleared when the disc is removed.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom  
Viewing a JPEG file  
Each time ZOOM is pressed the setting changes in  
the following order.  
This unit can play discs with JPEG files.  
Before playing JPEG recordings, read the note on  
JPEG Recordings on the right.  
Zoom on y Zoom off  
Press v, B or M to enlarge the video image.  
Press V, b or m to reduce the video image.  
1. Insert a disc and close the tray.  
The PHOTO menu appears on the TV screen.  
PHOTO  
List  
Preview  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
JPEG Folder  
1
2
3
4
5
6
7
8
JPEG file compatibility with this player is limited  
as follows:  
• Depending upon the size and the number of  
JPEG files, it could take a long time for the unit to  
read the disc’s contents. If you don’t see an on-  
screen display after several minutes, some of the  
files may be too large — reduce the resolution of  
the JPEG files to less than 2M pixels as 2760 x  
2048 pixels and burn another disc.  
2. Press v / V to select a folder, and then press  
SELECT/ENTER. A list of files in the folder  
appears.  
If you are in a file list and want to return to the  
• The total number of files and folders on the disc  
should be less than 999.  
previous Folder list, use v / V to highlight  
and  
press SELECT/ENTER or PLAY.  
• Some discs may not operate due to a different  
recording format or the condition of disc.  
3. If you want to view a particular file, press v / V to  
highlight a file and press SELECT/ENTER or  
PLAY. While viewing a file, you can press STOP  
to move to the previous menu (JPEG menu).  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
• If the files have “.jpe” or “.jpeg” extensions,  
please rename them as “.jpg” file.  
Slide Show  
Use v V b B to highlight the  
(Slide Show) then  
• File names without “.jpg” extension will not be  
able to be read by this unit. Even though the files  
are shown as JPEG image files in Windows  
Explorer.  
press SELECT/ENTER or PLAY.  
Tip:  
There are four Slide Speed options  
:
> (Slow), >> (Normal), >>> (Fast) and II (off).  
Use v /V /b /B to highlight the Speed. Then, use b / B to  
select the option you want to use and then press  
SELECT/ENTER.  
If you set Speed option to Off, the slide is not active.  
Still Picture  
1. Press PAUSE/STEP during the slide show.  
The unit will now go into the PAUSE mode.  
2. To return to the slide show, press PLAY or press  
PAUSE/STEP again.  
Moving to another File  
Press SKIP (. or >) once during viewing a  
picture to advance to the next or previous file.  
Rotating the picture  
Press v /V /b /B during showing a picture to rotate  
the picture clockwise or counter-clockwise.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DivX Movie file  
DivX file compatibility with this player is limited  
as follows:  
Using this unit you can play DivX file.  
• Available resolution size of the DivX file is under  
800x600 (W x H) pixel.  
1. Insert a disc and close the tray. The MOVIE menu  
appears on the TV screen.  
• The file name of the DivX subtitle is available by  
45 characters.  
0:00:00  
MOVIE  
1
/
5
• If there is impossible code to express in the DivX  
file, it may be displayed as " _ " mark on the  
display.  
List  
Movie Folder  
1
2
3
4
5
6
7
8
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
Movie Folder  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate  
normally.  
2. Press v / V to select a folder and then press  
SELECT/ENTER. A list of files in the folder  
appears. If you are in a file list and want to return  
• If the video and audio structure of recorded  
files is not interleaved, either video or audio is  
outputted.  
to the Folder list, use v / V to highlight  
and  
Playable DivX file  
press SELECT/ENTER or PLAY.  
".avi ", ".mpg ", ".mpeg ", ".divx"  
3. If you want to view a particular file, press  
v / V to highlight a file and press SELECT/ENTER  
or PLAY.  
Playable Subtitle format  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
4. Press STOP to exit.  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 2.0(*.sub/*.txt)  
VobSub(*.sub)  
Tip:  
• Press MENU to move to the next page.  
• On a CD with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE and MUSIC, PHOTO and MOVIE word  
on top of the menu is highlighted.  
Playable Codec format  
"DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ",  
"3IVX ".  
Note:  
Playable Audio format  
• Be sure to select “SUBTITLE ON” mode by pressing  
the subtitle file every time before playing a DivX file.  
• When the subtile has more than two languages in  
the file, original subtile is only available.  
You can not adjust sound mode and VIRTUAL  
sound during the DivX file playing.  
"AC3 ", "PCM ", "MP3 ", "WMA ".  
• Sampling frequency: within 32 - 48 kHz (MP3),  
within 24 - 48kHz (WMA)  
• Bit rate: within 32 - 320kbps (MP3),  
40 - 192kbps (WMA)  
• The DivX subtitle file name has to be identified with  
the DivX file name to display by this unit.  
Notice for displaying the Divx subtitle  
If the subtitle does not display properly during playback,  
press and hold SUBTITLE for about 3 seconds then  
press SUBTITLE to select another language code until  
the subtitle is displayed properly  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using iPod  
Note:  
You can enjoy playback of your iPod using the  
supplied remote control.  
• It works with all iPod models that have a dock  
connector.  
iPod is a trademark of Apple Computer, Inc, registered  
in the U.S. and other countries.  
• Compatibility with your iPod may vary depending  
on the type of your iPod.  
• Depending on your iPod’s software version, it may  
not be possible to control your iPod from the unit.  
We recommend installing the latest software  
version.  
General operation  
1. Connect your iPod and the unit with iPod cable.  
Refer to the page 9.  
Your iPod is automatically turned on.  
• Adjust the volume to a moderate level before you  
connect your iPod and this unit.  
2. Turn the unit on.  
3. Press iPod on the remote control to enter the iPod  
mode.  
• MIC function is not suppoted on the iPOD mode.  
The iPod menu appears on the TV screen.  
The initial screen of iPod menu is the OSD iPod  
mode.  
Playing the iPod in the Remote iPod  
mode  
4. Use v / V and ENTER on the Remote Control to  
display the list of menu.  
You can operate your iPod by using the supplied  
remote control and controls on your iPod.  
5. Press ENTER to play.  
1. Press iPod on the Remote Control until “IPOD”  
appears in the display window.  
General features  
Note:  
Remote Control  
buttons  
iPod  
buttons  
You can select the Remote iPod mode or OSD  
iPod mode by pressing repeatedly iPod on the  
remote control.  
Operations  
During pause, press B to  
resume playback.  
B (PLAY)  
X (PAUSE)  
x (STOP)  
B X  
B X  
-
2. Use v / V and ENTER on the Remote Control or  
controls on your iPod to display the list of menu by  
viewing your iPod.  
During playback, press X  
to pause playback.  
3. Press ENTER to play.  
During playback, press x  
to stop playback. Press  
ENTER to resume  
playback.  
Note:  
• When you connect the unit and TV to VIDEO  
IN/OUT, TV screen is turned off temporarily.  
During playback, press  
SKIP (. or >) to go to  
the next track or to return  
to the beginning of the  
current track. Press SKIP  
. twice briefly to step  
back to the previous track.  
SKIP  
(./>)  
./>  
Connect the VIDEO OUT jack on the rear of the  
unit to the VIDEO IN jack on the TV using the video  
cable if you want to view the video or photo file.  
SCAN  
(m / M)  
The images of video or photo files are outputted  
only when you connect the unit to the VIDEO OUT  
connector.  
Music file: During playback,  
press and hold SCAN (m or  
M) and then release at a  
point you want.  
Video file: During playback,  
press and hold SKIP (.  
or >) and then release at  
a point you want.  
During playback, press  
REPEAT repeatedly to  
select a desired repeat  
mode. (Track/All/Off)  
REPEAT  
MENU  
REPEAT  
MENU  
Moves to the previous  
menu.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing the iPod in the OSD iPod  
mode  
iPod message  
Remote iPod  
When you connect the unit and  
TV to COMPONENT VIDEO  
IN/OUT in the Remote iPod  
mode, the screen on the left  
appears.  
Please use Monitor output  
for viewing Video and photo  
from iPod.  
You can operate your iPod by controlling OSD menu  
on the TV screen with the supplied remote control.  
The controls on your iPod are not operational in the  
OSD iPod mode.  
Connect the unit and TV to  
1. Press iPod on the Remote Control until “OSD  
IPOD” appears in the display window.  
VIDEO IN/OUT  
.
2. Use v / V and ENTER on the Remote Control to  
When you select the Photos or  
Videos menu in the OSD iPod  
mode, the screen on the left  
appears. Change the unit to the  
Remote iPod mode.  
display the list of menu.  
3. Press ENTER to play.  
When you connect the iPod that  
is not supported on this unit, the  
screen on the left appears.  
Depending on your iPod’s  
software version, it may not be  
possible to control your iPod  
from the unit. We recommend  
installing the latest software  
version.  
Music  
Classifies and plays the files by Playlists, Artists,  
Albums, Genres, Songs, and Composers.  
Photos / Videos  
The video or photo file is not played in the OSD iPod  
mode.  
If you want to play the video or photo file, change to  
the Remote iPod mode.  
If the power of your iPod is  
insufficient or the iPod is  
misconnected or unknown  
device, the screen on the left  
appears.  
Now Playing  
Displays and plays the last played music file.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Presetting the Radio Stations  
You can preset 50 stations for FM and AM. Before  
tuning, make sure that you have turned down the  
volume to the minimum.  
Listening to the Radio  
1. Press TUNER/BAND to select the frequency (AM or  
FM) you want.  
The last received station is tuned in.  
1. Press TUNER/BAND to select the frequency (AM or  
FM) you want.  
2. Press PRESET (v/V) repeatedly to select the  
preset station you want.  
2. Select a station you want by pressing  
- Each time you press the button, the unit tunes in  
one preset station at a time.  
TUN. (-/+)  
Tuning in automatically  
ress TUN. (-/+) for more than 0.5 second.  
Scanning stops when the unit tunes in a station.  
Tuning in manually  
ress TUN. (-/+) briefly and repeatedly.  
.
3. Adjust the volume by pressing VOLUME (-/+)  
repeatedly.  
-
P
To listen to non-preset radio stations  
• For manual tuning, see “Tuning in manually” in the  
step 2 on left.  
• For automatic tuning, see “Tuning in automatically”  
in the step 2 on left.  
-
P
3. Press PROG./MEMO..  
A preset number will flash in the display window.  
4. Press PRESET (v/V) to select the preset number  
you want.  
To turn off the radio  
Press (POWER) to turn the unit off or select another  
1
5. Press PROG./ MEMO. again.  
function mode (DVD/CD, USB, AUX, OSD iPod).  
The station is stored.  
For your reference  
If an FM program is noisy;  
6. Repeat the steps 1 (or 2) to 5 to store other  
stations.  
Press MO./ ST. that “MONO” appears in the display  
window. There will be no stereo effect, but the  
reception will be improved.  
Press MO./ ST. again to restore the stereo effect.  
To improve reception;  
To delete all the memorized stations  
Press and hold PROG./ MEMO. for about two  
seconds, “ERASE ALL” appears in the display window  
and then PROG./ MEMO. again, the stations are  
deleted.  
Reposition the supplied antennas.  
For your reference  
If all stations have already been entered, “FULL”  
message will appear in the display window for a  
moment and then a preset number will flash. To  
change the preset number, follow steps 4-5.  
To recall presets  
Press and hold PRESET (v/V) until the desired preset  
number appears or press it repeatedly.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimmer  
This function will change the brightness of the display  
window on the front panel during in power-on status.  
XDSS  
(Extreme Dynamic Sound  
System)  
Press the DIMMER repeatedly.  
Press XDSS plus to reinforce treble, bass and the  
surround effect. The “XDSS ON” or “NORMAL”  
indicator lights.  
DVD/DivX/Audio CD : XDSS ON NORMAL  
MP3/WMA : XDSS ON t MP3 -- OPT ON  
t NORMAL t XDSS ON ...  
Mute  
Press MUTE to mute your unit.  
You can mute your unit in order, for example, to  
answer the telephone.  
MP3 Optimizer  
This function is an optimizer for compressible MP3  
files. It improves the bass sound to make sweet  
sound.  
Sound Mode  
You can enjoy surround sound simply by selecting  
one of the pre-programmed sound fields according to  
the program you want to listen to (2 ch. sound only).  
Each time you press XDSS Plus.  
Press SOUND MODE repeatedly.  
The setting changes in the following order.  
XDSS ON t MP3 -- OPT ON t NORMAL  
BYPASS ON STAGE STUDIO CLUB HALL  
THEATER 1 CHURCH BYPASS...  
Note:  
Initial sound mode is BYPASS.  
XTS Pro  
EQUALIZER Effect  
This unique sound quality developed by our  
technology creates the optimum sound for you to play  
the perfect playback of the original sound and to feel  
the living sound source.  
Each time you press XTS Pro the setting changes in  
the following order.  
You can choose 7 fixed sound impressions and adjust  
the BASS, MIDDLE and TREBLE.  
- You can select a desired sound mode by using EQ  
master.  
NORMAL USER EQ  
POP  
CLASSIC  
XTS -- P ON NORMAL  
Note:  
JAZZ  
DRAMA  
ROCK  
The XTS Pro function will not be operated when a  
headphone has been connected.  
- Press EQ master to select USER EQ.  
1. When USER EQ is displayed, press SET.  
0” will appear the display window.  
BASS  
VIRTUAL sound  
Press VSM to set the VIRTUAL sound.  
2. Tap the ./ > on the front panel to select the  
setting you want (MIN, -4 ~ +4, MAX steps).  
3. Select the BASS, MIDDLE or TREBLE you want  
Source  
2.1 ch.  
5.1 ch  
Display  
VIRTUAL  
VIRTUAL  
Effect  
3D STEREO  
VIRTUAL sound  
by tapping  
/
or x on the front panel.  
B ]]  
4. Adjust the MIDDLE and TREBLE as shown above.  
DEMO  
3D STEREO  
Press EQ master on the front panel in power off state  
to demonstrate the function in the display window. To  
cancel it, press POWER or EQ master again.  
Realtime 3D positioned sound rendering  
technology with stereo sources, optimized for  
stereo speakers. Listeners may experience  
amazing virtual surround effects with their own  
multimedia players.  
DISPLAY MODE  
VIRTUAL sound  
Whenever you press DISP. MODE (DISPLAY MODE),  
you can enjoy the spectrum change with 6 types in  
the display window.  
A pending downmix technology converts 5.1  
channel to 2 channel sound having directional  
information of audio. And it makes a 2 channel or  
2.1 channel feel 5.1 channel sound.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Language Codes  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Bengali; Bangla  
Bhutani  
Bihari  
Hebrew  
Hindi  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Sindhi  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Area Codes  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
Zimbabwe  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
FI  
FR  
DE  
GB  
GR  
GL  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
Brazil  
NL  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Heard and McDonald Islands HM  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
Kuwait  
Libya  
Luxembourg  
HK  
HU  
IN  
ID  
IL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
IT  
JM  
JP  
KE  
KW  
LY  
LU  
PT  
RO  
El Salvador  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Correction  
Cause  
Symptom  
No power.  
• Plug the power cord securely into the  
wall outlet.  
• The power cord is disconnected.  
• Insert a disc. (Check that the DVD or,  
audio CD indicator in the DVD display  
is lit.)  
• No disc is inserted.  
The power is on, but  
the unit does not work.  
• Select the appropriate video input  
mode on the TV so the picture from  
the unit appears on the TV screen.  
• The TV is not set to receive DVD signal  
output.  
No picture.  
• Connect the video cable into the  
jacks securely.  
• The video cable is not connected  
securely.  
• The connected TV power is turned off.  
• Turn on the TV.  
There is no sound or  
only a very low-level  
sound is heard.  
• The equipment connected with the  
audio cable is not set to receive DVD  
signal output.  
• Select the correct input mode of the  
audio receiver so you can hear the  
sound from the unit.  
• The audio cables are not connected  
securely.  
• Connect the audio cable into the  
jacks securely.  
• The power of the equipment connected  
with the audio cable is turned off.  
• Turn on the equipment connected  
with the audio cable.  
• The audio connecting cable is damaged.  
• The disc is dirty.  
• Replace it with new one.  
• Clean the disc.  
The playback picture is  
poor.  
The unit does not start • No disc is inserted.  
playback.  
• Insert a disc. (Check that the DVD, or  
audio CD indicator in the DVD display  
is lit.)  
• An unplayable disc is inserted.  
• Insert a playable disc. (Check the  
disc type, color system and Regional  
code.)  
• The disc is placed upside down.  
• Place the disc with the playback side  
down.  
• The disc is not placed within the guide.  
• Place the disc on the disc tray  
correctly inside the guide.  
• The disc is dirty.  
• Clean the disc.  
• A menu is on the TV screen.  
• Press the SETUP button to turn off  
the menu screen.  
• The Rating level is set.  
• The disc is dirty.  
• Cancel the Rating function or change  
the rating level.  
Loud hum or noise is  
heard.  
• Clean the disc.  
• The speakers and components are  
connected poorly.  
• Connect the speakers and  
components securely.  
• The unit is located too close to the TV.  
• Move your TV away from the audio  
components.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cause  
Correction  
Symptom  
• The antenna is positioned or connected  
poorly.  
• Connect the antenna securely.  
Radio stations cannot  
be tuned in.  
• Adjust the antennas and connect an  
external antenna if necessary.  
• The signal strength of the stations is too  
weak (when tuning in with automatic  
tuning).  
• Tune in the station manually.  
• No stations have been preset or preset  
stations have been cleared (when  
tuning by scanning preset stations).  
• Preset the stations (page 23).  
• The Remote Control is not pointed at  
the Remote Sensor of the unit.  
• Point the Remote Control at the Remote  
Sensor of the unit.  
The Remote Control  
does not work  
properly.  
• The Remote Control is too far from the  
unit.  
• Use the Remote Control within about 23  
ft (7 m).  
• There is an obstacle in the path of the  
Remote Control and the unit.  
• Remove the obstacle.  
• The batteries in the Remote Control are  
flat.  
• Replace the batteries with new ones.  
The front panel  
display is too dim.  
• Nothing is displayed on the front panel  
display.  
• Press DIMMER.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power supply  
Refer to main label  
Refer to main label  
3.31 kg  
Power consumption  
Net Weight  
External dimensions (W x H x D) 170 x 253 x 265 mm  
Operating conditions  
Operating humidity  
Laser  
Temperature: 5°C to 35°C, Operation status: Horizontal  
5% to 85%  
Semiconductor laser, wavelength 650 nm  
Signal system  
NTSC 525/60  
Frequency response (audio)  
Signal-to-noise ratio (audio)  
Dynamic range (audio)  
Harmonic distortion (audio)  
Video output  
40 Hz to 2 kHz  
More than 75 dB (1 kHz, NOP -3 dB, 20 kHz LPF/A-Filter)  
More than 75 dB  
0.5 % (1 kHz, at 1W position) (20 kHz LPF)  
1.0 V (p-p), 75 , negative sync./ RCA jack x 1  
Video  
COMPONENT VIDEO OUT  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 1  
Tuning Range  
87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz  
Intermediate Frequency  
Signal-to Noise Ratio  
Frequency Response  
Tuning Range  
10.7 MHz  
60/55 dB (Mono)  
50 - 10,000 Hz  
522 - 1,620 kHz or 520 - 1,720 kHz  
450 kHz  
Intermediate Frequency  
Stereo mode  
80 W + 80 W  
80 W + 80 W  
0.5 %  
Output Power  
T.H.D  
Frequency Response  
Signal-to-noise ratio  
Type  
40 - 20000 Hz  
75 dB  
3 Way 3 Speaker  
4  
Impedance  
Frequency Response  
70 - 20,000 Hz  
Sound Pressure Level  
Rated Input Power  
83 dB/W (1m)  
80 W  
Max. Input Power  
Net Dimensions (W x H x D)  
Net Weight  
160 W  
128 x 295 x 240 mm  
4.1kg  
Designs and specifications are subject to change without notice.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG Electronics, Inc.  
Limited Warranty - USA  
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or  
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date  
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser  
of the product and effective only when used in the United States, excluding U.S. Territories.  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,  
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED  
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG  
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE  
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT  
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE  
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or  
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to  
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
Damages or operating problems that result from shipping, installation, adjustment of user controls,  
calibration, maintenance or failure to maintain, or separate system components; and  
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside  
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,  
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current  
or voltage, signal reception or input, software not licensed directly by LG, software errors that do not disable  
functionality, operating and software protocols adopted after the date of manufacture or for outside the US,  
institutional or commercial use, or other causes not arising out of defect in material or workmanship.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
For Warranty Service, Where to buy, Product  
Assistance, or Customer Assistance  
Call 1-800-243-0000 (24 hours a day, 365 days per year)  
and select appropriate options from the menu.  
Or visit our website at http://www.lgservice.com  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
ENGLEWOOD CLIFFS, NJ  
P/N : MFL35424727  
Printed in China  
Issue O  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KTI Networks Computer Accessories 24 Port 10 100 Workgroup Switch User Manual
KWC Outdoor Shower Z200109000 User Manual
Land Pride Lawn Mower FDR16 Series User Manual
LG Electronics Flat Panel Television 206 4071P User Manual
Lindy Switch 32254 User Manual
Linear Switch HDMI SW 2X4M User Manual
Maytag Freezer W10326795A User Manual
McIntosh Speaker WS320 User Manual
Melissa Microwave Oven ED8525S F User Manual
Memorex VCR DBVT1341 User Manual