LCD TV
OWNER’S MANUAL
LCD TV MODELS
19LS4D
32LG30
32LG32
37LG30
42LG30
42LG32
*
**
**
**
**
**
22LS4D
*
32LG20
37LG20
42LG20
19LG30
22LG30
26LG30
**
**
**
**
**
**
32LG5
***
37LG50
42LG50
47LG50
52LG50
**
**
**
**
Please read this manual carefully before operating
your TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
To your dealer when requiring service.
ID Number(s): 5499: 22LS4D-ZD
5507: 19LS4D-ZD
Extended Owner’s Manual that contains advanced fea-
tures of these LG TV-sets is located on CD-ROM in
electronic version.
5629: 32LG2000-ZA
5630: 37LG2000-ZA
5721: 26LG3050-ZA
5631: 42LG2000-ZA
5088: 19LG3000-ZA
5080: 26LG3000-ZA
5087: 37LG3000-ZA
5090: 22LG3000-ZA
5089: 32LG3000-ZA
5086: 42LG3000-ZA
To read it You need to open chosen files by using
5085: 32LG5000-ZA
5084: 37LG5000-ZA
5083: 42LG5000-ZA
5082: 47LG5000-ZA
Personal Computer (PC) equipped with CD-ROM drive.
5081: 52LG5000-ZA
5385: 52LG5010-ZD
5386: 47LG5010-ZD
5387: 42LG5010-ZD
5388: 37LG5010-ZD
5389: 32LG5010-ZD
5390: 52LG5020-ZB
5391: 47LG5020-ZB
5392: 42LG5020-ZB
5393: 37LG5020-ZB
5394: 32LG5020-ZB
5395: 52LG5030-ZE
5396: 47LG5030-ZE
5397: 42LG5030-ZE
P/NO: MFL34441652 (0901-REV01)
Printed in Korea
5398: 37LG5030-ZE
5399: 32LG5030-ZE
5671: 32LG5700-ZF
5820: 19LG3050-ZA
5818: 22LG3050-ZA
5879: 19LG3060-ZB
5880: 22LG3060-ZB
5878: 32LG5600-ZB
6511: 42LG3200-ZA
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Image shown may differ from your TV.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Antenna Connection
1
ANTENNA IN
3
Power Cord
PCMCIA
EJECT
ANTENNA IN
AUDIO IN
(RGB/DVI)
CARD SLOT
HDMI/DVI IN
AV 1
AV 2
RS-232C IN
RGB (PC) IN
(CONTROL & SERVICE)
COMPONENT IN
VIDEO AUDIO
Y
PB
P
R
L
R
SERVICE
ONLY
AV 1 AV 2
VCR Connection
2
2
DVD/STB
External equipment Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
• Please read these safety precautions carefully before using the product.
• In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.
PrecWaAuRtNiIoNGn in Installing the Product
If you ignore the caution message, you may be slightly injured or the product may be damaged.
CAUTION
CAUTION
Protect the power cord from physical or mechanical
WARNING
abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
appliance.
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Precautions in Moving the Product
WARNING
Do not use the product in damp place such as a bath-
room or any place where it is likely to get wet.
- This may cause a fire or could give an electric shock.
Make sure to turn off the product.
Make sure to remove all cables before moving the
product.
If you can smell smoke or other odors or hear a strange
- You may be electrocuted or the product can be dam-
sound unplug the power cord and contact the service
aged.
center.
- If you continue to use without taking proper measures, elec-
trical shock or fire can occur.
CAUTION
Do not shock the product when moving it.
- You may be electrocuted or the product can be damaged.
CAUTION
Make the panel face forward and hold it with both
hands to move.
Install the product on a flat and stable place that
has no risk of dropping the product.
- If you drop the product, the damaged product can cause elec-
tric shock or fire. Contact with the service center for repair.
- If the product is dropped, you may be injured or the
product may be broken.
Precautions in Using the Product
WARNING
Keep the product away from direct sunlight.
- The product can be damaged.
Do not disassemble, repair or modify the product at
your own discretion.
- Fire or electric shock accident can occur.
- Contact the service center for check, calibration or
repair.
Do not place the product in a built-in installation
such as bookcase or rack.
Electrical P-oVewnteilatrionRreequliraedt. ed Precautions
To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
ApparCatuAsUsThaIlOl nNot be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
WARNING
Make sure to connect the power cable to the ground-
ed current.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
- You may be electrocuted or injured.
damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normal-
ly, or has been dropped.
Do not touch the power plug with wet hands.
Additionally, it the cord pin is wet or covered with
dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
Do not keep a still image on the screen for an
extended period (e.g. by pausing a video) as the fixed
image may remian visible on the screen. This is known
as image burn. Image burn is not covered under the
manufacturer’s warranty.
During a thunder or lightning storm, unplug the
power cable or signal cable.
- You may be electrocuted or a fire can break out.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
FRONT PANEL CONTROLS
■
Image shown may differ from your TV.
■
If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
LCD TV Models :
32/37/42LG20 , 26/32/37/42LG30 , 32/42LG32 , 32/37/42/47/52LG5
**
**
**
***
P
PROGRAMME
VOLUME
+
-
Intelligent Sensor
Adjusts picture according to
the surrounding conditions.
OK
OK
(32/37/42/47/52LG5
only)
***
MENU
MENU
INPUT
POWER
INPUT
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Power Indicator
Note: You can adjust
in the OPTION menu.
LCD TV Models : 19/22LG30
**
MENU
VOLUME
PROGRAMME
INPUT
OK
INPUT MENU OK
-
+
P
LCD TV Models : 19/22LS4D
*
MENU
VOLUME
PROGRAMME
POWER
INPUT
OK
Remote Control Sensor
• illuminates green when the TV is switched on.
INPUT
OK
VOL
PR
/I
MENU
Power/Standby Indicator
• illuminates red in standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
2
3
4
1
13
COMPONENT
IN
OPTICAL
DIGITAL
AUDIO IN
(RGB/DVI)
USB IN
AV 1
AV 2
AUDIO OUT
SERVICE ONLY
10
5
HDMI/DVI IN
2
RGB IN (PC)
1(DVI)
RS-232C IN
(CONTROL & SERVICE)
ANTENNA IN
Except for
32/37/42LG20 ,
**
5
6
7
8
9
32/42LG32
**
9
10
5
2
S-VIDEO
PCMCIA
EJECT
ANTENNA IN
AUDIO IN
CARD SLOT
HDMI/DVI IN
(RGB/DVI)
AV 1
AV 2
11
RS-232C IN
RGB (PC) IN
(CONTROL & SERVICE)
COMPONENT IN
VIDEO AUDIO
AV IN 3
H/P
Y
P
B
P
R
L
R
12
SERVICE
ONLY
7
8
6
13
4
1
8
Power Cord Socket
Component Input
This TV operates on an AC power. The voltage is
Connect a component video/audio device to
these jacks.
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
9
10
Antenna Input
2
3
RGB/DVI Audio Input
Connect RF antenna to this jack.
Connect the audio from a PC or DTV.
PCMCIA (Personal Computer Memory Card
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D )
*
International Association) Card Slot
Connect digital audio from various types of equipment.
(This feature is not available in all countries.)
Note: In standby mode, these ports do not work.
11
Audio/Video Input (Except for 19/22LS4D )
*
4
5
Euro Scart Socket (AV1/AV2)
Connect audio/video output from an external
device to these jacks.
Connect scart socket input or output from an
external device to these jacks.
S-VIDEO (Except for 19/22LS4D , 32/37/42LG20 ,
*
**
32/42LG32
)
**
HDMI Input
Connect S-Video out from an S-VIDEO device.
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO)
12
13
signal to HDMI/DVI port with DVI to HDMI cable.
Headphone Socket (Except for 19/22LS4D
,
*
32/37/42LG20 , 32/42LG32
**
)
**
6
7
RGB IN (PC)
Connect the headphone plug to this socket.
Connect the output from a PC.
SERVICE ONLY PORT
RS-232C IN (CONTROL & SERVICE) PORT
Download from Www.Somanuals.com. All Manuals Search And Download.
STAND INSTALLATION
(LCD TV Models: 32/37/42LG20 26/32/37/42LG30 32/42LG32 , 32/37/42LG5
)
***
**,
**,
**
A
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the
product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt
can deviate from abrasion of the tightening part of the bolt.
Carefully place the TV screen side down on a
Assemble the TV as shown.
1
3
cushioned surface to protect the screen from
damage.
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Assemble the parts of the
with
4
2
Cover Base
the
of the TV.
Stand Body
Cover Base
(Only 19/22LG30 )
**
Stand Body
Cover Base
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
1
2
STAND BODY
COVER BASE
STAND BODY
Assemble the parts of the
with
of the TV. Insert the
into a
COVER BASE
until clicking sound.
Assemble the TV as shown.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
STAND INSTALLATION
DETACHING STAND
(Only 19/22LS4D )
*
(Only 19/22LS4D )
*
■
Image shown may differ from your TV.
Place the tv with its front facing downward on a
Carefully place the TV screen side down on a
1
1
2
cushion or soft cloth.
cushioned surface to protect the screen from
damage.
Cover Base
Pull the
backward during pressing
2
Stand Body
a button on the
.
Hinge Body
Hold the
and bend it upward.
Hinge Body
Cover Base
Hold the
and pull with shake it
3
4
Stand Body
backward to separate from the
.
Stand Body
Insert the
sound.
into the TV until clicking
3
Stand Body
Hold the
and bend it upward.
Stand Body
Stand Body
Assemble the parts of the
with
4
Cover Base
the
of the TV.
Pull stand body to separate from the TV during
pressing 2 latches.
5
Cover Base
Download from Www.Somanuals.com. All Manuals Search And Download.
BACK COVER FOR WIRE ARRANGEMENT
L1CD TV Models:
1
LCD TV Models :
32/37/42LG20 , 26/32/37/ 42LG30 ,
**
**
19/22LS4D , 19/22LG30
*
**
32/42LG32 , 32/37/42/47/52LG5
**
***
Connect the cables as neces-
Connect the cables as necessary.
sary.
To connect additional equipment, see the
External Equipment Setup section.
To connect additional equip-
ment, see the External
Equipment Setup section of
the manual.
CABLE MANAGEMENT CLIP
Open the
as
2
shown and manage the cables.
Install the CABLE MANAGEMENT CLIP as shown.
2
CABLE MANAGECMABELNE MTACNALGIEPMENT CLIP
as
(Only 19/22LS4D )
*
Fit the
shown.
3
(Only 19/22LG30 )
**
How to remove the cable management clip
CABLE
First, press the cable management. Hold the
Hold the CABLE MANAGEMENT CLIP with both
MANAGEMENT CLIP
upward.
with both hands and pull it hands and pull it backward.
(Only 19/22LS4D )
(Only 19/22LG30 )
*
**
NOTE
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
G
- If the TV is dropped, you may be injured or the TV may be damaged.
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
■
■
■
You should purchase necessary components to fix the TV to the wall on the market.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This
will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
1
1
2
2
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen these bolts.)
1
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
2
3
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the
TV.
3
NOTE
When moving the TV undo the cords first.
G
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
G
G
■
■
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
Ensure that you connect the earth wire to prevent possible
Power Supply
breaker
electric shock. If grounding methods are not possible, have a
qualified electrician install a separate circuit breaker.
Circuit
Do not try to earth the TV by connecting it to telephone
wires, lightening rods or gas pipes.
Download from Www.Somanuals.com. All Manuals Search And Download.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches
4 inches
R
Attaching the TV to a desk (Only 32/37/42LG20 , 26/32/37/42LG30 , 32/42LG32 , 32/37/42LG5
)
***
**
**
**
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached screw.
Stand
1-Screw
(provided as parts of the product)
Desk
WARNING
To prevent TV from falling over, the TV should be securely attached to the floor/wall per
installation instructions. Tipping, shaking, or rocking the machine may cause injury.
G
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall
mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
Not using the desk-type stand (Except for 19/22LS4D )
*
■
Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover for
PROTECTION COVER
desk-type stand installation. Insert the
the TV until clicking sound.
into
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■
For optimum picture quality, adjust antenna direction.
■
An antenna cable and converter are not supplied.
Multi-family Dwellings/Apartments
Wall
(Connect to wall antenna socket)
ANTENNA IN
Antenna
Socket
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
(VHF, UHF)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
ANTENNA IN
Antenna
Signal
Amplifier
VHF
■
■
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
5
5
6
POWER
TV
D/A
INPUT
1
6
TV/RADIO TEXT
I/II
MUTE
2
1
4
2
5
3
6
7
3
7
8
0
9
LIST
Q.VIEW
10
MENU
AV MODE
8
or
3
OK
8
7
9
INFO
i
GUIDE
EXIT
RETURN
4
VOL
PR
4
*
FAV
9
6
INPUT
10
External input mode rotate in regular sequence.
Switches the TV on from standby.
1
7
8
MODE
GUIDE
Shows programme schedule.
Selects the remote operating modes.
2
3
THUMBSTICK(Up/Down/LeftRight)
Q. MENU
Allows you to navigate the on-screen menus and
Select the desired quick menu source.
adjust the system settings to your preference.
MENU
OK
Selects a menu.
Accepts your selection or displays the current mode.
Clears all on-screen displays and returns to TV view-
ing from any menu.
9
Programme UP/DOWN
Selects a programme.
4
5
VOLUME UP /DOWN
Adjusts the volume.
10 Q.VIEW
Returns to the previously viewed programme.
POWER
Switches the TV on from standby or off to standby.
Installing Batteries
■
Open the battery compartment cover on the back and install the batteries matching
correct polarity (+with +,-with -).
■
■
Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones.
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV /PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly.
1
2
At this stage, the TV switches to standby mode.
r
In standby mode to turn TV on, press the
/ I, INPUT or P
(or PR
) button on the TV or
D E
press the POWER, INPUT, D/A, P
(or PR + -) or NUMBER button on the remote control and the
TV will switch on.
Initializing setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
Language, Select Mode, Country, Time Zone, Auto programme tuning.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. Press the BACK or RETURN button to change the current OSD to the previous OSD.
c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work,
depending on the DTV broadcasting environment.
d. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data, “In
Store” mode initializes the product to the image quality set by us after a certain period of time.
f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
2
1
OK
OK
Select your country.
Select your desired language.
* If you want to change Language/ Country selection
1
3
MENU
Select your desired language or
country.
OK
OK
OPTION
Select
Select
.
4
2
Menu Language
.
OK
Save it.
Country
or
NOTE
If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On
G
Screen Display) the installation menu will continuously appear until the set up is completed whenever the
TV is switched on
If you select the wrong local country, teletext may not appear correctly on the screen and some problems
G
may occur during teletext operation.
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.
DTV mode control buttons may not function based on country broadcasting circumstances.
In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending
G
G
G
on digital broadcasting circumstances.
The Country Setting “UK” should only be activated UK.
G
Download from Www.Somanuals.com. All Manuals Search And Download.
ON SCREEN MENUS SELECTION AND ADJUSTMENT
(
)
Your TV's OSD On Screen Display may differ slightly from what is shown in this manual.
Move
OK
SETUP
Move
OK
PICTURE
Auto tuning
Manual tuning
Programme Edit
Booster
Aspect Ratio
Picture Mode
: 16:9
: Vivid
• Backlight
100
100
50
70
70
0
: On
• Contrast
• Brightness
• Sharpness
• Colour
Software Update : Off
Diagnostics
CI Information
R
G
• Tint
E
Move
OK
AUDIO
Auto Volume
Balance
: Off
L
-
R
+
0
SETUP
TIME
PICTURE
OPTION
AUDIO
Sound Mode : Standard
• 120Hz
0
0
0
0
0
-
-
+
+
• 200Hz
• 500Hz
• 1.2KHz
• 3KHz
-
-
+
+
LOCK
E
Move
OK
Move
OK
Move
OK
TIME
OPTION
LOCK
Clock
Menu Language : English
Audio Language : English
Subtitle Language : English
Lock System
Set Password
: Off
Off Time
On Time
: Off
: Off
Block Programme
(
)
Sleep Timer : Off
Hard of Hearing
Off
Parental Guidance : Off
Auto Sleep : Off
Country
:UK
Time Zone : Canary GMT
Input Label
SIMPLINK
Key Lock
: Off
: Off
E
1
2
3
MENU
Display each menu.
Select a menu item.
OK
OK
Move to the pop up menu.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to move to the previous menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
WATCHING TV /PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming in digital mode, all previously stored service information will be deleted.
Move
OK
Move
OK
SETUP
SETUP
Auto tuning
Auto tuning
Auto tuning
Auto tuning
Manual tuning
Programme Edit
Booster
Manual tuning
Programme Edit
Booster
All service-information will be updated.
Continue?
SECAM L Search
: On
: On
Software Update : Off
Diagnostics
Software Update : Off
Diagnostics
Yes
No
CI Information
CI Information
1
2
MENU
Select SETUP.
• Use NUMBER buttons to input a 4-digit
button. Otherwise select NO.
password in Lock System ‘On’.
• If you wish to keep on auto tuning select YES
OK
Select Auto Tuning.
using the
button. Then, press the OK
3
4
OK
OK
Select Yes.
Run Auto tuning.
• Press the MENU button to return to normal TV viewing.
• Press the RETURN button to move to the previous menu screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it
1
Cleatnoinwigpetthhee sCcraeebni.net
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
2
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
A
Do not to use a wet cloth.
Extended Absence
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
G
cord to protect against possible damage from lightning or power surges.
TO VIEW THE USER'S GUIDE ON THE CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC.
The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader.
If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG"
double-click your language.
Open the folder "ACRORD"
To view the User's guide
The User's guide files are included in the supplied CD-ROM.
Load the supplied CD-ROM into the CD-ROM drive of your PC.
After a while, the web page of the CD-ROM will open automatically.(Windows users only)
TIORf ptOheen wU"MebyBpcaLogmEepduSoteeHrs"nOot aOppTearIaNutoGmatically, open the User's guide file directly.
Open the folder "LG"
Double click the "index.htm" file.
The TV does not operate properly.
A
Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
Ensure that the batteries are installed with correct polarity (+ to +, - to -).
Ensure that the correct remote operating mode is set: TV, VCR etc.
Install new batteries.
The remote control
A
A
A
does not work
A
A
A
Is the sleep timer set?
Power is suddenly
turned off
Check the power control settings. Has the Power supply been interrupted.
Is Auto sleep activated on this station?
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX
The video function does not work.
A
A
A
A
A
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
Is the power cord inserted correctly into the mains?
Check your antenna direction and/or location.
No picture &No sound
Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly
A
This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
after switching on
A
A
A
A
A
Adjust Colour in menu option.
Allow a sufficient distance between the TV and the VCR.
Try another channel. The problem may be with the broadcast.
Are the video cables installed properly?
No or poor colour
or poor picture
Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
A
Check for local interference such as an electrical appliance or power tool.
A
A
A
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
Check for sources of possible interference.
Poor reception on
some channels
Lines or streaks
in pictures
A
Check antenna (Change the position of the antenna).
Check HDMI cable over version 1.3.
A
No picture
If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no
screen display. In this case use the latest cables that support HDMI version 1.3.
when connecting HDMI
The audio function does not work.
A
Press the VOLUME button.
A
A
A
Sound muted? Press MUTE button.
Picture OK & No sound
Try another channel. The problem may be with the broadcast.
Are the audio cables installed properly?
No output from one
of the speakers
A
A
Adjust Balance in menu option.
Unusual sound from
inside the TV
A change in ambient humidity or temperature may result in an unusual noise
when the TV is switched on or off and does not indicate a fault with the TV.
No sound when
connecting HDMI or
A
A
Check HDMI cable over version 1.3.
Check USB cable over version 2.0.
*This feature is not available for all models.
Download from Www.Somanuals.com. All Manuals Search And Download.
There is a problem with PICTURE settings.
When the user changes
the picture settings, the
TV automatically converts
back to the initial settings
after a certain period of
A
In Store
It means that the TV is currently set to
mode.
Home
To switch to
mode you should do the followings:
OPTION Factory Reset Yes
From the TV Menu, choose
->
->
(wait for a
WELCOME
few seconds for the TV to download again) -> OSD "
" appears ->
OK
Language
Home
Press
button -> Choose
-> Choose
-> Select your
WEIGtHimeT.
Country
Time Zone
OK
and
-> Press
button. Program search will begin
OK
automatically (You can stop the search by pressing the
button). Now, you
Home
have completed switching to the
mode.
19LS4D
*
22LS4D
19LG30
**
*
MODELS
19LG3000-ZA
19LS4D-ZD
22LS4D-ZD
19LG3050-ZA
19LG3060-ZB
with stand
Weight
5.1 kg / 11.3 lbs
6.1 kg / 13.5 lbs
5.02 kg / 11.1 lbs
without stand
4.6 kg / 10.2 lbs
5.7 kg / 12.6 lbs
4.76 kg / 10.5 lbs
32LG30
**
26LG30
**
22LG30
**
MODELS
32LG3000-ZA
26LG3000-ZA
22LG3000-ZA
22LG3050-ZA
22LG3060-ZB
26LG3050-ZA
32LG3030-ZA
with stand
Weight
Weight
5.6 kg / 12.4 lbs
10.1 kg / 22.3 lbs
13.4 kg / 29.6 lbs
without stand
5.34 kg / 11.8 lbs
8.6 kg / 19.0 lbs
11.9 kg / 26.3 lbs
37LG30
**
32LG20
37LG20
42LG30
**
**
**
MODELS
37LG3000-ZA
32LG2000-ZA
37LG2000-ZA
42LG3000-ZA
37LG3030-ZA
42LG3030-ZA
with stand
18.8 kg / 41.5 lbs
23.6 kg / 52.1 lbs
13.4 kg / 29.6 lbs
18.8 kg / 41.5 lbs
without stand
16.2 kg / 35.7 lbs
21.0 kg / 46.3 lbs
11.9 kg / 26.3 lbs
42LG3200-ZA
16.2 kg / 35.7 lbs
32LG5
***
42LG20
**
32LG32
**
42LG32
**
32LG5000-ZA
42LG2000-ZA
32LG3200-ZA
32LG5010-ZD
MODELS
32LG5020-ZB
32LG5030-ZE
32LG5600-ZB
32LG5700-ZF
with stand
Weight
23.6 kg / 52.1 lbs
13.4 kg / 29.6 lbs
23.6 kg / 52.1 lbs
14.1 kg / 31.1 lbs
without stand
21.0 kg / 46.3 lbs
11.9 kg / 26.3 lbs
21.0 kg / 46.3 lbs
12.6 kg / 27.8 lbs
37LG50
42LG50
47LG50
52LG50
**
**
**
**
37LG5000-ZA
42LG5000-ZA
47LG5000-ZA
52LG5000-ZA
MODELS
37LG5010-ZD
42LG5010-ZD
47LG5010-ZD
52LG5010-ZD
37LG5020-ZB
37LG5030-ZE
42LG5020-ZB
42LG5030-ZE
47LG5020-ZB
47LG5030-ZE
52LG5020-ZB
52LG5030-ZE
with stand
Weight
18.3 kg / 40.4 lbs
26.2 kg / 57.8 lbs
29.2 kg / 64.4 lbs
39.5 kg / 87.1 lbs
without stand
15.6 kg / 34.4 lbs
23.5 kg / 51.8 lbs
24.6 kg / 54.3 lbs
34.9 kg / 77.0 lbs
■
The specifications shown above may be changed without prior notice for quality improvement.
Download from Www.Somanuals.com. All Manuals Search And Download.
(UK only)
Download from Www.Somanuals.com. All Manuals Search And Download.
|