Model PM4200 User Guide
INTEGRATED AMPLIFIER
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS LIST
English .................................................................................................................................... page 4
Français .................................................................................................................................. page 9
Deutsch ................................................................................................................................. Seite 14
Nederlands..........................................................................................................................pagina 19
Italiano.................................................................................................................................pagina 24
Português ............................................................................................................................página 29
Español ...............................................................................................................................página 34
Svenska ................................................................................................................................ sidan 39
Dansk .................................................................................................................................... page 44
Specifications ........................................................................................................................ page 49
Figures .................................................................................................................................. page 50
CE MARKING
English
This PM4200 is in conformity with EMC directive and low-voltage directive.
Français
Le PM4200 est conforme à la directive EMC et à la directive sur les basses tensions.
Deutsch
Das Modell PM4200 entspricht den EMC-Richtlinien und den Richtlinien für Niederspannungsgeräqte.
Nederlands
De PM4200 voldoet ann de EMC-eisen en de vereisten voor laagspanning.
Italiano
Il PM4200 è conforme alle diettive CEE ed a quelle per i bassi voltaggi.
Português
O PM4200 conforma com as diretrizes EMC e de baixa voltagem.
Español
El PM4200 está de acuerdo con las normas EMC y las relacionadas con baja tensión.
Svenska
PM4200 tillverkad i enlighe med EMC direktiven och direktiven för låvoltsutrusing.
Dansk
Model PM4200 er i overensstemmelse med EMC-direktiveet og direktivet om lavspænding.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Español
To ensure proper ventilation for the amplifier, do not mount it in a rack or
locate it inside a bookshelf. Note the following precautions.
Para garantizar que el amplificador reciba la ventilación adecuada, no lo monte
en un bastidor ni lo coloque en una estantería. Adopte las siguientes medidas
de precaución.
- Do not insert objects into the space underneath the amplifier.
- Do not block the vents on the top of the amplifier.
- Keep the area above the amplifier unobstructed for about one meter.
- Allow approximately 20 centimeters of space on all sides of the amplifier.
- No introduzca ningún objeto por debajo del amplificador.
- No obstruya los orificios de ventilación de la parte superior del amplificador.
- Deje aproximadamente un metro de espacio por encima del amplificador.
- Deje aproximadamente 20 centímetros de espacio por todos los lados del
amplificador.
Français
Pour assurer une bonne ventilation de l’amplificateur, ne pas le monter sur
rack ni le placer à l’intérieur d’une bibliothèque. Toujours observer les pré-
cautions suivantes:
Italiano
Per garantire una ventilazione adeguata all’amplificatore non porlo in un rack
o entro una libreria. Si notino le seguenti precauzioni.
- Ne jamais introduire d’objets dans l’espace situé au-dessous de l’amplifica-
teur.
- Non mettere nulla sotto all’amplificatore.
- Veiller à ne pas obstruer les orifices de ventilation au-dessus de l’amplifica-
teur.
- Laisser la zone au-dessus de l’amplificateur dégagée sur environ un mètre.
- Laisser environ 20 cm d’espace libre de chaque côté de l’amplificateur.
- Non ostruire gli orifizi sul lato superiore dell’amplificatore.
- Lasciare uno spazio libero di circa un metro sopra l’amplificatore.
- Lasciare circa 20 cm di spazio attorno all’amplificatore.
Português
Deutsch
Para ventilação adequada do amplificador, não o coloque numa prateleira
nem dentro de um armário. Observe as precauções seguintes:
Um eine ausreichende Belüftung des Verstärkers zu gewährleisten, montieren
Sie ihn nicht in einem Rack, und stellen Sie ihn nicht in ein Regal. Beachten
Sie die folgenden Vorsichtsmaßnahmen.
- Não coloque objectos por baixo do da base do amplificador.
- Não obstrua os orifícios de ventilação no topo do amplificador.
- Mantenha um espaço livre de mais ou menos um metro por cima do amplificador.
- Deixe um espaço de cerca de 20 centímetros de cada lado do amplificador.
- Legen Sie keine Objekte in den Zwischenraum unterhalb des Verstärkers.
- Blockieren Sie nicht die Lüftungsöffnungen an der Oberseite des Verstärkers.
- Achten Sie darauf, daß der Bereich bis etwa 1 m oberhalb des Verstärkers
nicht verstellt wird.
Svenska
Montera ej förstärkaren i ett ställ eller placera den i en bokhylla eftersom
detta kan göra att den inte ventileras korrekt. Observera följande
säkerhetsåtgärder.
- Lassen Sie an allen Seiten des Verstärkers etwa 20 Zentimeter Platz.
Nederlands
Zorg voor goede ventilatie rond de versterker, en plaats hem daarom niet in
een rek of in een boekenkast. Lees de volgende voorzorgsmaatregelen goed
door.
- För ej in föremål i utrymmet under förstärkaren.
- Blockera ej ventilationshålen på förstärkarens översida.
- Håll ca. 1 meter ovanför förstärkaren fritt.
- Plaats geen voorwerpen in de ruimte onder de versterker.
- Blokkeer de ventilatiegaten bovenop de versterker niet.
- Zorg ervoor dat er zich ongeveer één meter vrije ruimte boven de verster-
ker bevindt.
- Zorg ervoor dat er zich ongeveer 20 centimeter vrije ruimte aan alle zijden
van de versterker bevindt.
- Se till att det finns ca. 20 cm fritt utrymme runt om förstärkaren.
Dansk
God ventilation af forstærkeren er nødvendig, hvorfor den ikke må installeres
i en reol eller på en boghylde o.l. Husk at iagttage følgende:
- Læg ikke genstande ind under forstærkeren.
- Bloker ikke åbningerne oven på forstærkeren.
- Hold et område på ca. en meter over forstærkeren frit.
- Der skal være mindst 20 centimers fri afstand hele vejen rundt om forstær-
keren.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FOREWORD
ABOUT THIS USER GUIDE
Refer to the Figures on the pages at the rear of this user guide.
The callout numbers on the Figures correspond to those found in
the text. All references to the connections and controls that are
printed in BOLD type are as they appear on the unit.
This section must be read before any connection is made to the
mains supply.
WARNINGS
PRECAUTIONS
Do not expose the equipment to rain or moisture.
Do not remove the cover from the equipment.
The following precautions should be taken when operating the
equipment.
Do not push anything inside the equipment through the
ventilation holes.
GENERAL PRECAUTIONS
When setting the equipment ensure that:
— the ventilation holes are not covered
Do not handle the mains lead with wet hands.
— air is allowed to circulate freely around the equipment
— it is on a vibration free surface
— it will not be exposed to interference from an external source
— it will not be exposed to excessive heat, cold, moisture or dust
— it will not be exposed to direct sunlight
EQUIPMENT MAINS WORKING SETTING
Your Marantz product complies with the household power and
safety requirements in your area.
“N”or “UK” Version product can be powered by 230 V AC only.
— it will not be exposed to electrostatic discharges
In addition, never place heavy objects on the equipment.
If a foreign body or water does enter the equipment, contact your
nearest dealer or service center.
Do not pull out the plug by pulling on the mains lead, hold the plug.
It is advisable when leaving the house, or during a thunder-storm,
to disconnect the equipment from the mains supply.
IMPORTANT:
This apparatus is fitted with an approved moulded 13 Amp plug.
To change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362 5A, A.S.T.A. or BSI
approved type.
3. Refit the fuse cover.
CONNECTIONS (Figure 1)
If the fitted plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of 5A.
If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5A.
NOTE: The severed plug must be destroyed to avoid a possible
shock hazard should it be inserted into a 13A socket
elsewhere.
CONNECTION OF TUNER
Connect the output jacks of your stereo tuner to the TUNER jacks
of this unit.
CONNECTION OF COMPACT DISC PLAYER
Connect the output jacks of your CD player to the CD jacks of this
unit.
CONNECTION OF TURNTABLE
HOW TO CONNECT A PLUG
Connect the L (Left) output cord of the turntable to the “L”
PHONO jack of this unit, and connect the R (Right) output cord
to the “R” PHONO jack. Also be sure to connect the turntable’s
grounding wire to the GND jack of this unit. The GND jack does
not have to be connected if the turntable is not provided with a
grounding wire.
The wires in the mains lead are coloured in accordance with the
following code:
BLUE—”NEUTRAL” (“N”)
BROWN—”LIVE” (“L”)
1. The BLUE wire must be connected to the terminal which is
marked with the letter “N” or coloured BLACK.
2. The BROWN wire must be connected to the terminal which is
marked with the letter “L” or coloured RED.
3. Do not connect either wires to the earth terminal in the plug
which is marked by the letter “E” or by the safety earth symbol
or coloured green or green-and-yellow.
CONNECTION OF MD/TAPE DECK
Connect the IN (recording input) jacks of the tape deck to the
TAPE OUT jacks of this unit, and connect the OUT (playback
output) jacks of the tape deck to the MD/TAPE IN jacks of this unit.
CONNECTION OF CD recorder
Before replacing the plug cover, make certain that the cord grip
is clamped over the sheath of the lead — not simply over the two
wires.
Connect the IN (recording input) jacks of the CD recorder to the
CD-R OUT jacks of this unit, and connect the OUT (playback
output) jacks of the CD recorder to the CD-R IN jacks of this unit.
COPYRIGHT
CONNECTION OF SPEAKER SYSTEMS
Recording and playback of any material may require consent. For
further information refer to the following:
— Copyright Act 1956
— Dramatic and Musical Performers Act 1958
— Performers Protection Acts 1963 and 1972
— any subsequent statutory enactments and orders
This unit is equipped with two sets of SPEAKER SYSTEM
terminals––SYSTEM 1 terminals and SYSTEM 2 terminals.
Usually connect your speaker system to the SYSTEM 1 terminals.
¡ The speakers in the speaker system should have an imped-
ance between 8 and 16 ohms. If speakers with an impedance
of less than 8 ohms are connected, the protection circuitry may
be activated during play.
¡ Connect the Right channel speaker to the R terminals, and the
Left channel speaker to the L terminals.
¡ The output terminals have positive (+: Red) and negative
(–: Black) polarity, and each speaker also has the same
polarity (+ and –). When connecting the speaker, be sure to
connect the terminals with the same polarity (+ with +, –
with –).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS, CONNECTORS,
AND INDICATORS
(Figure 2)
! MUTING INDICATOR
q PHONO INPUT JACKS
Light up when the MUTING button in the remote control unit is
Connect the output jacks of a turntable to these jacks.
pressed.
w GND (GROUND) TERMINAL
Connect the grounding wire from the turntable to this terminal.
NOTE:
Be sure to check the VOLUME control setting before pressing
this switch to cancel muting. If the muting is canceled while the
volume setting is high, the speakers could be damaged.
e CD PLAYER INPUT JACKS
Connect the output jacks of a Compact Disc player to these jacks.
! LOUDNESS SWITCH
r TUNER INPUT JACKS
Connect the output jacks of the tuner to these jacks.
The LOUDNESS switch compensates for human hearing char-
acteristics by boosting the bass and treble response at low
volume levels to achieve a more pleasing tonal balance.
t AUX/DVD INPUT JACKS
These are auxiliary input jacks which can be used to connect the
audio outputs of AV components such as DVD players, TV
multiplex/stereo audio tuners, VCRs, and laserdisc players.
!VOLUME CONTROL
Adjusts the volume level. Turn the knob clockwise to increase the
volume.
y MD/TAPE IN/OUT JACKS
Connect the play (output) jacks and record (input) jacks of MD or
tape decks to these jacks.
! BALANCE CONTROL
Turn the knob to correct an unbalanced program source such as
stereo broadcast or to vary the output level of the left or right
channel. Note that, if the BALANCE control is turned fully in one
direction, the sound will not be heard from the speaker on the
other side.
u CD-R IN/OUT JACKS
Connect the play (output) jacks and record (input) jacks of CD
Recorder to these jacks.
! SPEAKERS 1 / 2 SWITCHES
These switches are used to select the speaker system(s)
connected to the SPEAKER SYSTEM 1 / 2 terminals on the rear
panel. If both the 1 and 2 switches are pressed to the low
positions, two speaker systems can be used at the same time.
When headphones are used for listening, set both switches 1 and
2 to OFF (high positions).
i SPEAKER SYSTEMS 1 / 2 TERMINALS
Connect your speaker system(s) to these terminals.
o REMOTE CONTROL BUS TERMINALS
(REMOTE CONT. BUS)
Another item of audio equipment with a remote control bus
terminal can be connected to these terminals by using a special-
purpose cable. The bus OUT terminal is used to send signals to
another item of equipment. The bus IN terminal is used to receive
signals from another item of equipment.
@ BASS AND TREBLE TONE CONTROLS
Adjusts the tone by controlling the levels of two frequency bands.
Turn each control toward (+) to enhance the corresponding
frequency band, or toward (–) to attenuate it.
TREBLE: Adjusts the high frequency level.
BASS: Adjusts the low frequency level.
! POWER CORD
Connect to a household power outlet.
@ REC SELECTOR SWITCH
Selects the tape dubbing mode between tape decks or the signal
output at the REC OUT jacks.
! POWER SWITCH
Pressing once switches the power ON, and pressing again
switches it OFF.
The POWER indicator lights when the POWER switch is ON, and
go out when the POWER switch is OFF.
@ REMOTE SENSOR
The remote sensor receives the infrared commands from the
remote control unit. When an infrared signal is received from the
remote control unit. The remote control unit must always be
pointed directry at the remote sensor.
! INPUT SELECTOR
Selects the program source to be recorded or played from the
PHONO, CD, TUNER, AUX/DVD, MD/TAPE, and CD-R.
@ PHONES JACK
Insert the standard phone plug of the headphones into this jack.
! STAND BY INDICATOR
Lights up when the unit is in the stand-by mode.
! TONE DEFEAT SWITCH
¡ When the switch is not depressed, the audio signals are
applied to the tone control circuit and the tone can be adjusted
using the tone control knob.
¡ When the switch is depressed, the audio signals bypass the
tone control circuit and the tone control knob does not function.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION PROCEDURES
RECORDER OPERATION
INTEGRATED AMPLIFIER PM4200
INPUT SELECTOR
INTEGRATED AMPLIFIER PM4200
INPUT SELECTOR
VOLUME
VOLUME
PHONO
CD
TUNER
AUX/DVD
CD-R
MD/TAPE
PHONO
CD
TUNER
AUX/DVD
CD-R
MD/TAPE
TONE DEFEAT
MUTE
LOUDNESS
TONE DEFEAT
MUTE
LOUDNESS
ON
OFF
ON
OFF
ON
OFF
ON
OFF
REC SELECTOR
OFF
BASS
TREBLE
MIN
MAX BALANCE
REC SELECTOR
OFF
BASS
TREBLE
MIN
MAX BALANCE
1
SPEAKERS
2
1
SPEAKERS
2
SOURCE
PHONO
SOURCE
PHONO
POWER ON/OFF
PHONES
STANDBY
POWER ON/OFF
PHONES
STANDBY
MD/TAPE
→CD-R
MD/TAPE
→CD-R
CD
CD
CD-R→
CD-R→
TUNER
AUX/DVD
TUNER
AUX/DVD
MD/TAPE
MD/TAPE
COPY
COPY
ON
OFF
ON
OFF
–
+
–
+
L
R
–
+
–
+
L
R
REC SELECTOR
Operate each equipment to start play.
Control used for operating the tape deck.
TO PLAY AN ANALOG DISC
PLAYBACK
1. Set the INPUT SELECTOR switch q to PHONO.
2. Play a disc on the turntable.
1. Set the INPUT SELECTOR switch A to MD/TAPE or CD-R.
2. Play a prerecorded disc or tape on the recorder.
3. Adjust the volume with the VOLUME control B.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
4. Adjust the tone with the BASS and TREBLE controls C.
NOTES:
¡ Set the VOLUME control to the minimum position before
placing the stylus on the disc or before replacing the cartridge.
¡ Do not apply shock or vibration to the turntable during play, as
this may cause the stylus to jump and the analog disk to be
damaged.
¡ If the turntable is installed too close to the speakers, the
volume may not be able to be increased to a high level due to
howling.
RECORDING
The playback sound of a program source component, such as a
turntable, a tuner, or a CD player, can be recorded on disc or tape
as follows.
1. Set the INPUT SELECTOR switch A to the program source
to be recorded.
2. Play the program source.
¡ Do not switch the power OFF while the stylus is on the disc
surface.
3. Operate the recorder(s) to record the playback sound on
disc(s) or tape(s).
TO LISTEN TO FM/AM BROADCASTS
Using REC SELECTOR switch
REC SELECTOR
OFF
1. Set the INPUT SELECTOR switch q to TUNER.
2. Tune in the desired station on the tuner.
SOURCE
PHONO
MD/TAPE
→CD-R
CD
CD-R→
TUNER
AUX/DVD
MD/TAPE
3. Adjust the volume with the VOLUME control w and adjust the
COPY
tone with the BASS and TREBLE controls e.
TO PLAY A DVD OR COMPACT DISC
1. Set the INPUT SELECTOR switch q to CD.
2. Play a CD on the CD player.
The REC SELECTOR switch is used when copying a recorded
disc or tape to another disc or tape, or recording a CD onto a
recordable disc or cassette tape.
1. When the switch is in the OFF position, the signal is not output
at the REC OUT jacks.
3. Adjust the volume with the VOLUME control w and adjust the
tone with the BASS and TREBLE controls e.
It is not necessary to output the signal at the REC OUT jacks
when the signal is not recorded onto disc or tape.
By setting the switch to OFF, the signal path inside the unit can
be shortened and crosstalk, etc., can be reduced.
TO PLAY A DVD OR COMPONENT CONNECTED TO AUX
JACKS
The component connected to the AUX jacks on the rear panel
can be played as follows.
2. In the SOURCE position, the signal selected with the INPUT
SELECTOR switch can be recorded onto disc/tape.
1. Set the INPUT SELECTOR switch q to AUX.
3. In the COPY positions, the MD/TAPE signal can be recorded
2. Play the component connected to the selected input.
onto CD-R or vice versa.
3. Adjust the volume with the VOLUME control w and adjust the
4. In the COPY position, the program source selected with the
INPUT SELECTOR switch can be monitored through the
speakers.
tone with the BASS and TREBLE controls e.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL UNIT RC4200PM
USING THE REMOTE CONTROL UNIT
The RC4200PM can be used to control a Marantz AV component
equipped with a remote sensor as well as other Marantz compo-
nents connected to the first component through the Remote
Control Bus. The buttons of the RC4200PM are laid out on its
control panel according to the functional groups as described
1. Remote control
Operate the remote control unit within a distance of approx. 5 m
from the infrared signal reception window (remote sensor) on the
front of the Amplifier.
Remote control operation may not be possible if the remote
control unit's transmitter is not pointing in the direction of the
remote sensor or if there is an obstruction between the
transmitteote sensor.
below.
MAIN POWER SOURCE
ON
OFF
AMP
POWER
PHONO CD TUNER CD-R
AUX
DVD TAPE
MD
Remote control operating range
Amplifier
1
4
7
–
2
5
8
0
3
6
9
+
F/P
-/--
MODE
MEMO
Approx. 5 m
–MODE–
SCROLL CANCEL TEXT TIME
MUTE
OPEN/
VOLUME
CLOSE
60°
SYSTEM REMOTE CONTROLLER
RC4200PM
Remote control unit
z POWER ON/OFF buttons
a. MAIN POWER ON button
2. Loading batteries
Turns the PM4200's power on when it is in the stand-by
mode.
Batteries in this remote control unit have a life of approximately
1 year under normal operating conditions. When the remote
control unit is not to be used for an extended period of time,
remove the batteries. Also, when you notice that the batteries are
starting to run down, replace them as soon as possible.
b. MAIN POWER OFF button
Sets the PM4200's power to the stand-by mode when it is set
to the power-on mode.
c. SOURCE POWER button
Switching the mode of a CD player, tuner, CD-R or other
Marantz component equipped with a power stand-by function
between power-on and stand-by is enabled by pressing this
button after the FUNCTION SELECT button corresponding
to the component has been pressed.
(1)Remove the battery cover.
Remote control unit
Rear side
When this button is pressed after pressing the TUNER
button, the tuner's power is turned on; when it is pressed
again, the tuner is set to the stand-by mode.
When this button is pressed after pressing the AMP button,
the PM4200 is switched from the power-on mode to the
stand-by mode or vice versa.
x FUNCTION SELECT button
PHONO button : When this button is pushed the input of
PHONO is selected.
(2)Insert batteries with correct + / – orientation.
CD button : When this button is pushed the input of
CD is selected.
TUNER button : When this button is pushed the input of
TUNER is selected.
Two AA (R6)-size
batteries
CD-R button : When this button is pushed the input of
CD-R is selected.
AUX button : When this button is pushed the input of
AUX/DVD is selected.
DVD button : When this button is pushed the input of
AUX/DVD is selected.
TAPE button : When this button is pushed the input of
MD/TAPE is selected.
MD button : When this button is pushed the input of
MD/TAPE is selected.
c VOLUME UP/DOWN button
UP button : VOLUME knob turns when this button is
pushed and the volume level is grows.
DOWN button : VOLUME knob turns when this button is
(3)Close the battery cover until it clicks shut.
pushed and the volume level is falls.
v MUTE button
When this button is pushed, the sound is not temporarily
emitted from the speakers.
When this button is pushed again, MUTE is released.
Moreover, when up/down of the volume is operated by
remote control, MUTE is released.
Other buttons are not applied to PM4200.
Please see at the owners manual of other equipment’s about
the operation of button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING
CARE AND MAINTENANCE
In case of trouble or abnormal operation of the unit, check the
following before contacting service personnel. What may seem
to be a serious malfunction is often the result of a simple
operation mistake. If the trouble persists after checking the
following, please contact your dealer or nearest Marantz distribu-
tor.
This section describes the care and maintenance tasks that must
be performed to optimize the operation of your Marantz equipment.
CLEANING OF EQUIPMENT EXTERNAL SURFACES
The exterior finish of your PM4200 will last indefinitely with proper
care and cleaning. Never use scouring pads, steel wool, scouring
powders or harsh chemical agents (e.g., lye solution), alcohol,
thinners, benzine, insecticide or other volatile substances as
these will mar the finish of the equipment. Likewise, never use
cloths containing chemical substances. If the equipment gets
dirty. wipe the external surfaces with a soft, lint-free cloth.
If the equipment becomes heavily soiled:
The amplifier does not operate and the indicators do not
light.
1. Check to see if the power cord is inserted properly into the
power outlet.
The indicators light but the amplifier does not operate.
— dilute some washing up liquid in water, in a ratio of one part
detergent to six parts water
1. Check to see if the SELECTOR,SPEAKER switches and
VOLUME control are properly set.
— dip a soft, lint free in the solution and wring the cloth out until
it is damp.
Sound is heard from only one of the speakers.
— wipe the equipment with the damp cloth.
— dry the equipment by wiping it with a dry cloth.
1. Check to see if the BALANCE control is properly set.
2. Switch the power of the unit to OFF, and change the connec-
tions of the left and right speaker cords. If the sound from the
same speaker is still not heard, its connection cord or the
speaker itself may be defective.
REPAIRS
Only the most competent and qualified service technicians
should be allowed to service the equipment. The Marantz company
and its factory-trained warranty station personnel have the
knowledge and special facilities needed for repair and calibration
of this precision equipment. After the warranty period has expired,
repairs will be performed for a charge if the equipment can be
returned to normal operation.
In the event of difficulty, refer to your dealer or write directly to the
nearest location to you that is listed on the Marantz Authorised
Service Station list. If writing, please include the model and serial
number of the equipment together with a full description of what
you think is abnormal about the equipment’s behaviour.
Considerable hum noise is heard when the turntable is
played.
1. Check to see if the plugs from the turntable are properly
connected to the PHONO jacks.
2. Connect the grounding wire of the turntable to the GND
terminal on the rear panel of this unit. If it has already been
connected, try removing it.
3. Check to make sure that the phono cartridge is attached
securely to the tonearm.
4. Unplug the power cord and plug it in again after inverting the
orientation of the blades.
Remote control operation is not possible.
1. Is the remote control unit's transmitter pointed correctly at the
remote sensor on the front of the Amplifier?
Or, is there an obstruction between the transmitter and the
remote sensor?
2. Are the batteries in the remote control unit exhausted?
3. Is there another strong light (from a window, etc.) striking the
Amplifier remote sensor?
4. Is an RCA cord connected to the "REMOTE CONTROL IN"
jack on the Amplifier rear panel?
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MODEL PM4200 TECHNICAL SPECIFICATIONS (DIN)
Power output
RMS 8 Ohms/4 Ohms (40 Hz – 20 kHz) .................................................................................................................................. 30 / 40 W
DIN 8 Ohms / 4 Ohms...............................................................................................................................................................35 / 45 W
IHF dynamic power
8 Ohms / 4 Ohms ..................................................................................................................................................................... 50 / 80 W
THD at 8 Ohms RMS rated output .............................................................................................................................................. 0.005%
Intermodulation distortion............................................................................................................................................................. 0.005%
Damping factor..................................................................................................................................................................................... 80
Magnetic cartridge input
Input sensitivity impedance ...................................................................................................................................... 2.5 mV / 47 k ohms
Accuracy of frequency response to RIAA ..................................................................................................................................... 0.5 dB
Signal to noise ratio ....................................................................................................................................................................... 80 dB
Tuner / CD / Aux/DVD / MD/Tape / CD-R inputs
Input sensitivity impedance ..................................................................................................................................... 150 mV / 20 k ohms
Signal to noise ratio ..................................................................................................................................................................... 105 dB
Frequency response (–1 dB) ......................................................................................................................................... 10 Hz – 50 kHz
Tone characteristic (100 Hz and 10 kHz) ....................................................................................................................................... ±6 dB
Channel separation ........................................................................................................................................................................ 70 dB
General
Power Requirements
N, UK version ........................................................................................................................................................ 230 V AC, 50 Hz
Dimensions (MAX)
Width .................................................................................................................................................................................... 440 mm
Height ................................................................................................................................................................................... 116 mm
Depth .................................................................................................................................................................................... 343 mm
Weight ............................................................................................................................................................................................ 6.0 kg
Specifications subject to change without prior notice.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
MD or Tape deck
Turntable
INPUT
OUTPUT
OUTPUT
GND
SPEAKER SYSTEMS
SYSTEM
SYSTEM
1
2
:
4
4
8
-16 OHMS
-16 OHMS
-16 OHMS
:
:
SYSTEM 1+2
SYSTEM 2
R
L
PHONO
CD TUNER AUX/DVD MD/TAPE
CD-R
L
R
R
L
IN
OUT
IN
OUT
SYSTEM 1
INPUT
OUTPUT
OUTPUT
OUTPUT
CD recorder
CD player
Analog output jacks of DVD player,
AV components, video disc player, etc.
SPEAKER SYSTEMS
SYSTEM
SYSTEM
SYSTEM 1+2
1
2
:
:
:
8
8
-16 OHMS
-16 OHMS
16 OHMS
5 mm
SYSTEM1
R
L
R
L
SYSTEM2
Loosen the terminal
Inset the core
Tighten the terminal
Connection of speaker cable
Figure 1
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Model PM4200
N Version
GND
SPEAKER SYSTEMS
SYSTEM
SYSTEM
1
2
:
4
4
8
-16 OHMS
-16 OHMS
-16 OHMS
:
:
SYSTEM 1+2
SYSTEM 2
～
REMOTE
CONTROL
R
L
IN
PHONO
CD TUNER AUX/DVD MD/TAPE
CD-R
OUT
L
R
R
L
IN
OUT
IN
OUT
SYSTEM 1
INTEGRATED AMPLIFIER PM4200
INPUT SELECTOR
VOLUME
PHONO
CD
TUNER
AUX/DVD
CD-R
MD/TAPE
TONE DEFEAT
MUTE
LOUDNESS
ON
OFF
ON
OFF
REC SELECTOR
OFF
BASS
TREBLE
MIN
MAX BALANCE
1
SPEAKERS
2
SOURCE
PHONO
POWER ON/OFF
PHONES
STANDBY
MD/TAPE
→CD-R
CD
CD-R→
TUNER
AUX/DVD
MD/TAPE
COPY
ON
OFF
–
+
–
+
L
R
Figure 2
51
Download from Www.Somanuals.com. All Manuals Search And Download.
COUNTRY
ALGERIE
COMPANY
ADDRESS
Azur 2000
8, Lotissement Ben Hatadi, Alger, Algerie
ARMENIA
AUSTRALIA
AUSTRIA
NGYIG Ltd.
47 A/75 St. Lalaiants, 375000 Yerevan, Armenia
24 Lionel Road, Mt. Waverley, VIC 3149, Australia
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria
P.O. Box 237,141, Government Avenue, Manama,Bahrein
1078, Ramjoy Mohanja Lane Asadgonj, Chittagong 4000, Bangladesh
Brusselbaan 278, 9320 Erembodegem, Belgium
Makedonia Blvd. 16, 1606 Sofia, Bulgaria
Jamo Australia Pty. Ltd.,
Huber & Prohaska GmbH
Ambassador Stores
Target
BAHREIN
BANGLADESH
BELGIUM
Van der Heyden Audio N.V.
Ariescommerce GmbH
BULGARIA
CANADA
CHINA
Lenbrook Industries Limited
633 Granite Court, Pickering, Ontario
Guang Chang Audio International Co., Ltd. No.38 Yushan Road, ShiQiao, Pan Yu, Guang Dong, China
CYPRUS
CZECH REPUBLIC
DENMARK
DUBAI
Empire Hifi systems Ltd.
Audio International
Audio Nord
P.O. Box 5604, Nicosia, Cyprus
Sokolska 41, 67902 Rajecko, OKR,Blansko, Czech Republic
Dali Allé 1, 9610 Noerager, Denmark
V.V.& SONS
P.O. Box 105, Dubai, U.A.E.
EGYPT
Solimco
9, El Attibaa St. Doki, Cairo, Egypt
ESTONIA
F.Y.R.O.M.
FINLAND
FRANCE
GERMANY
GREECE
HiFi Club Estonia
T.P. KODI
Ehte 4, 90503 Haapsalu, Estonia
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija
Uudenmaankatu 4-6, Helsinki SF-00120, Finland
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France
Hakenbusch 3, 49078 Osnabrück, Germany
Audio Nord
Marantz France
Marantz Deutschland
Adamco S.A.
188, Hippocratous Street, 11471 Athens, Greece
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
Unit 1706, Metroplaza II, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong
Terez Krt.31, 1067 Budapest, Hungary
HEADQUARTERS EUROPE: Marantz Europe B.V.
HONG KONG
HUNGARY
ICELAND
INDIA
Marantz Asia Ltd.
Infovox Ltd.
ID Electronics Ltd.
NOVA Audio Private
Home Co.
Armula 38, 108 Reykjavik, Iceland
8,Punam Co-op.Society 29/30 Road#5, Union Park MUMBAI 400052, India
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran
Clonskeagh, Dublin 14, Ireland
IRAN
IRELAND
ISRAEL
Marantz Ireland
Elmor Ltd.
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde
B.P. 2428, Abidjan 01, Ivory Coast
ITALY
Marantz Italy
IVORY COAST
JAPAN
Hifivoir
Marantz Japan Inc.
Mk Enterprises Ltd.
alAlamiah Electronics Intl.
Ace Ltd.
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505, Japan
121-210, 2F Shinhan Bldg., 247-17 Seokyo-dong, Mapo-ku, Seoul, Korea
P.O. Box 8196, Salmiah 22052, Kuwait
KOREA
KUWAIT
LATVIA
61, LacPlesa Str., Riga LV 1011, Latvia
LEBANON
LITHUANIA
MALAYSIA
MALTA
AZ Electronics S.A., 1,
Accapella Ltd.
P.O. Box 11 2833, Beirut, Lebanon
Ausros, Vartu G/5, Pasazo SKG., 2001 Vilnius, Lithuania
Wo Kee Hong Electronics Sdn. Bhd. Suite 8.1, Level 8, Menara Genesis, No. 33, Jalan Sultan Ismail, 50250 Kuala Lumpur, Malaysia
Doneo Co Ltd.
78 The Strand, Sliema SLM07, Malta
MAURITIUS
SKR Electronics Ltd.
P.O. Box 685, Bell Village, Port Louis, Mauritius
MILITARY MARKET EUROPE PASCO GmbH
PO BOX 1280, Sandhausen 69200, Germany
NETHERLANDS
NEW ZEALAND
NORWAY
Marantz Domestic Sales
A division of Marantz Europe B.V., Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands
14 Malvern Road, Mt. Albert, Auckland, New Zealand
Sandkerveien 64, Oslo 0483, Norway
Wildash Audio Systems
Audio Nord
OMAN
Mustafa & Jawad Trading CO.
Philips Polska Sp. z.o.o.
Corel2
P.O. Box 1918, Ruwi, Oman
POLAND
Al.Jerozolimskie 195b, 02 222 Warszawa, Poland
PORTUGAL
PROFESSIONAL EUROPE
PROFESSIONAL U.S.A.
QATAR
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illino
P.O. Box 49, Doha, Qatar
Marantz Professional Products
Marantz Professional Products
Almana & Partners W.W.L.
Vision +
REUNION
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion
5, Zagazului Str. Bl.1G,apt.18, sector 1,Bucharest, Romania
7/2, Montazhnaya Street, 107497 Moscow, Russia
ROMANIA
Nova Music Entertainment
Absolute Audio
RUSSIA
SAUDI ARABIA
SINGAPORE
SLOVAKIA
SLOVENIA
SOUTH AFRICA
SPAIN
Adawlia Univ. Electr. Apl
Wo Kee Hong Distribution PTE Ltd.
Bis Audio s.r.o.
P.O. Box 2154, Alkhobar 31952, Saudi Arabia
130 Joo Seng Road, #03-02 Olivine Building, Singapore 368357
Nam. SNP 10, 96001 Zvolem, Slovakia
Bofex
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia
P.O. Box 1614, Alberton, 1450, South Africa
Coherent Imports (PTY) Ltd.
Marantz Spain
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain
Mezzanine Floor, The Landmark 385, Galle Road, Colombo - 3, Sri Lanka
Almedalsvagen 4, Gotenborg 402-23, Sweden
SRI LANKA
SWEDEN
The listening Room
Audio Nord
SWITZERLAND
SYRIA
Sound Company AG
Hamzeh & Partners
Covecolor
Postfach, 8010 Zürich, Switzerland
Hafez Ibrahim Str. No 117, Damascus Shalan, Syria
TAHITI
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand
40, Avenue du Golfe Arabe, El Menzah, 1004, Tunesia
Yukari Dudullu Organize sanayi Bolgesi, 2.Cadde no.28, 81260 Umraniye-Istanbul, Turkey
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.
1100 Maplewood Drive Itasca, IL 60143, U.S.A.
TAIWAN
Pai-Yuing Co. Ltd.
MRZ Standard Co. Ltd.
Societe EDEVIG
THAILAND
TUNESIA
TURKEY
Türk Philips Ticaret A.S.
Marantz Hifi UK Ltd.
Marantz America Inc.
ITM Company
U.K.
U.S.A.
YUGOSLAVIA
Omladinskih Brigada 86, 11070 Belgrade, Yugoslavia
EXPORT
Marantz Domestic Sales
A division of Marantz Europe BV,Building SFF2, P.O. Box 80002, 5600 JB Eindhoven, TheThe Netherlands
is a registered trademark.
Printed in Korea
01/06 M ITs 350W 851310
Download from Www.Somanuals.com. All Manuals Search And Download.
|