LG Electronics DVD VCR Combo V194H User Manual

V1940MH_EVENT_ENG  
DVD Player &  
Video Cassette Recorder  
OWNER’S MANUAL  
MODEL : V194H  
Before connecting, operating or adjusting this  
product, please read this owner’s manual  
carefully and completely.  
For service/  
support Call:  
Toll Free Number  
1-800-243-0000  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND  
THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
CAUTION:  
This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or  
fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installa-  
tion, use, and servicing.  
This product does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVIC-  
ING TO QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions. - All these safety and operating  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience recepta-  
cles, and the point where they exit from the product.  
instructions should be read before the product is operated.  
2. Keep these instructions. - The safety, operating and use  
instructions should be retained for future reference.  
11. Only use attachments/accessories specified by the  
manufacturer.  
3. Heed all warnings. - All warnings on the product and in  
the operating instructions should be adhered to.  
4. Follow all instructions. - All operating and use instruc-  
tions should be followed.  
5. Do not use this product near water. – For example: near  
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet  
basement; or near a swimming pool; and other areas  
located near water.  
6. Clean only with dry cloth. – Unplug this product from the  
12. Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with appara-  
tus. When a cart is used, use caution when moving  
the cart/product combination to avoid injury from  
tip-over.  
wall outlet before cleaning. Do not use liquid cleaners.  
7. Do not block any ventilation openings. Install in accor-  
dance with the manufacturer’s instructions. Slots and  
-
openings in the cabinet are provided for ventilation and to  
ensure reliable operation of the product and to protect it  
from over- heating. The openings should never be blocked  
by placing the product on a bed, sofa, rug or other similar  
surface. This product should not be placed in a built-in  
installation such as a bookcase or rack unless proper ven-  
tilation is provided or the manufacturer’s instructions have  
been adhered to.  
13. Unplug this product during lightning storms or when  
unused for long periods of time.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the product has been  
damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects  
have fallen into the product, the product has been  
exposed to rain or moisture, does not operate nor-  
mally, or has been dropped.  
8. Do not install near any heat sources such as radiators,  
heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug  
has two blades and a third grounding prong. The wide  
blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult  
an electrician for replacement of the obsolete outlet.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Operations - VCR . . . . . . . . . . . . . .21-27  
Introduction . . . . . . . . . . . . . . . . . . . .5-10  
Moisture Condensation . . . . . . . . . . . . . . . . . .5  
Symbol Used in this Manual . . . . . . . . . . . . .5  
VCR Tape Playback . . . . . . . . . . . . . . . . .21-22  
Basic Instructions . . . . . . . . . . . . . . . . . . . . .21  
Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .21  
Manual Tracking . . . . . . . . . . . . . . . . . . . . . .21  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Still Picture and Frame-by-Frame Playback .21  
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . .22  
CM SKIP (Commercial Skip) . . . . . . . . . . . . .22  
VHS Hi-Fi Stereo/MTS Broadcast . . . . . . . . .22  
Hi-Fi Stereo Audio Sound . . . . . . . . . . . . . . .22  
MTS (Multi-Channel TV Sound) . . . . . . . . . .22  
VCR Tape Recording . . . . . . . . . . . . . . . .23-26  
Basic Instructions . . . . . . . . . . . . . . . . . . . . .23  
Timer Recording . . . . . . . . . . . . . . . . . . .23-24  
Instant Timer Recording . . . . . . . . . . . . . . .25  
Recording from External Components . . . . .25  
Copying from DVD to VCR . . . . . . . . . . . . .26  
On-Screen Display - VCR . . . . . . . . . . . . . . .26  
About the  
Symbol Display . . . . . . . . . . . .5  
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .5  
About the Remote Control . . . . . . . . . . . . . . .5  
Types of Playable Discs . . . . . . . . . . . . . . . . .6  
Regional code . . . . . . . . . . . . . . . . . . . . . . . .6  
Selecting the Viewing Source . . . . . . . . . . . . .6  
Card usable on this unit . . . . . . . . . . . . . . . . .7  
Using Memory Card . . . . . . . . . . . . . . . . . . . . .7  
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9  
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Preparation . . . . . . . . . . . . . . . . . . .10-20  
Connecting an Antenna or Cable TV . . . . . . .11  
Basic TV Connections . . . . . . . . . . . . . . .11-12  
Optional TV Connections . . . . . . . . . . . . . . .12  
Resolution setting . . . . . . . . . . . . . . . . . . . . .12  
HDMI connection . . . . . . . . . . . . . . . . . . . . . .13  
Connection to an amplifier . . . . . . . . . . . . . .14  
Additional VCR Information . . . . . . . . . . . . .27  
VCR Auto Play System . . . . . . . . . . . . . . . . .27  
S-VHS Quasi Playback (SQPB) . . . . . . . . . .27  
Easy Information . . . . . . . . . . . . . . . . . . . . .27  
Operations - DVD . . . . . . . . . . . . . .28-34  
Initial Settings - VCR . . . . . . . . . . . . . . . .15-16  
General Operation . . . . . . . . . . . . . . . . . . . .15  
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . .15  
• Manual Clock Set . . . . . . . . . . . . . . . . . . .15  
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . .15  
TUNING . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
• Auto Channel Programming . . . . . . . . . .16  
To Add or Erase Channels . . . . . . . . . . . .16  
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
• FUNCTION OSD . . . . . . . . . . . . . . . . . .16  
• AUDIO MODE . . . . . . . . . . . . . . . . . . . . .16  
• BROADCAST TYPE  
Playback Setup . . . . . . . . . . . . . . . . . . . . . . .28  
General Features . . . . . . . . . . . . . . . . . . .28-29  
Additional Features . . . . . . . . . . . . . . . .29-30  
Playing an Audio CD or MP3/WMA Disc . . .31  
Programmed Playback . . . . . . . . . . . . . . . .31  
Viewing a JPEG file . . . . . . . . . . . . . . . . . . .32  
Playing a DivX Movie file . . . . . . . . . . . . . . . .33  
Playing a DVD VR format Disc . . . . . . . . . . .34  
Maintenance and Service . . . . . . . . . . . . . . .34  
Reference . . . . . . . . . . . . . . . . . . . .35-39  
Controlling your TV with the  
supplied remote . . . . . . . . . . . . . . . . . . . . . .35  
(STEREO/SAP/MONO) . . . . . . . . . . . . . .16  
• AUDIO OUTPUT  
(STEREO/LEFT/RIGHT) . . . . . . . . . . . . .16  
Displaying Disc Information on-screen . . . .17  
Language Codes List . . . . . . . . . . . . . . . . . .36  
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .36  
Troubleshooting . . . . . . . . . . . . . . . . . . .37-38  
Initial Settings - DVD . . . . . . . . . . . . . . . .17-20  
General Operation . . . . . . . . . . . . . . . . . . . .17  
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . .18  
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
LOCK (Parental Control) . . . . . . . . . . . . . . .19  
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Specifications . . . . . . . . . . . . . . . . . . . . . . . .39  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future refer-  
ence.  
Storing Discs  
After playing, store the disc in its case. Do not  
expose the disc to direct sunlight or sources of heat  
and never leave it in a parked car exposed to direct  
sunlight.  
This manual provides information on the operation  
and maintenance of your DVD+VCR. Should the unit  
require service, contact an authorized service loca-  
tion.  
Cleaning Discs  
Fingerprints and dust on the disc can cause poor pic-  
ture quality and sound distortion. Before playing,  
clean the disc with a clean cloth. Wipe the disc from  
the center out.  
Moisture Condensation  
Never operate the DVD+VCR immediately after mov-  
ing it from a cold location to a warm location. Leave it  
for two or three hours without operating it. If you use  
the DVD+VCR in such a situation, it may damage  
discs/tapes and internal parts.  
Symbol Used in this Manual  
Note:  
Indicates special notes and operating  
features.  
Do not use strong solvents such as alcohol, benzine,  
thinner, commercially available cleaners, or anti-static  
spray intended for older vinyl records.  
Tip:  
Indicates tips and hints for making the task  
easier.  
A section whose title has one of the following sym-  
bols is applicable only to the disc represented by the  
symbol.  
About the Remote Control  
Operation Range  
ALL  
Point the remote control at the remote sensor and  
press the buttons.  
All discs listed below  
DVD  
DVD and finalized DVD R/RW  
Distance: About 23 ft (7 m) from the front of the  
VCD  
Video CDs  
remote sensor.  
ACD  
Audio CDs  
Angle:  
About 30° in each direction of the front of the  
remote sensor.  
MP3  
MP3 files  
Battery installation  
Detach the battery cover on the rear of  
WMA  
WMA files  
DivX  
DivX files  
the remote control, and insert two  
(R03/AAA) size batteries with 3 and #  
aligned correctly.  
About the  
Symbol Display  
” may appear on your TV display during opera-  
Caution: Do not mix old and new batteries and  
never mix different types of batteries such as stan-  
dard, alkaline, etc.  
tion and indicates that the function is not permitted by  
this unit or the disc.  
Notes on Discs  
Handling Discs  
Do not touch the playback side of the disc. Hold the  
disc by the edges so that fingerprints do not get on  
the surface. Never stick paper or tape on the disc.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Copyrights:  
It is forbidden by law to copy, broadcast, show,  
broadcast via cable, play in public, or rent copyright-  
ed material without permission.  
This product features the copy protection function  
developed by Macrovision. Copy protection signals  
are recorded on some discs. When recording and  
playing the pictures of these discs picture noise will  
appear. This product incorporates copyright protec-  
tion technology that is protected by method claims of  
certain U.S. patents and other intellectual property  
rights owned by Macrovision Corporation and other  
rights owners. Use of this copyright protection tech-  
nology must be authorized by Macrovision  
Types of Playable Discs  
DVD  
(8 cm / 12 cm disc)  
Audio CD and Video CD  
(8 cm / 12 cm disc)  
In addition, this unit plays Memory Card, DVD-R,  
DVD+R, DVD-RW, DVD+RW, SVCD, and CD-R /  
CD-RW that contains audio titles, MP3, WMA, and/or  
JPEG, DivX files.  
This indicates a product feature that is  
capable of playing DVD-RW discs recorded  
with Video Recording format.  
Corporation, and is intended for home and other limit-  
ed viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or dis-  
assembly is prohibited.  
Notes:  
Depending on the conditions of the recording  
equipment or the CD-R/RW (or DVD R/RW) disc  
itself, some CD-R/RW (or DVD R/RW) discs  
cannot be played on the unit.  
Notice for Progressive Scan Use  
Only plays if DVD-RW is recorded in Video mode  
and has been finalized.  
CONSUMERS SHOULD NOTE THAT NOT ALL  
HIGH DEFINITION TELEVISION SETS ARE FULLY  
COMPATIBLE WITH THIS PRODUCT AND MAY  
CAUSE ARTIFACTS TO BE DISPLAYED IN THE  
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN  
PICTURE PROBLEMS, IT IS RECOMMENDED  
THAT THE USER SWITCH THE CONNECTION TO  
THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE  
ARE QUESTIONS REGARDING OUR TV SET COM-  
PATIBILITY WITH THIS MODEL 525p DVD+VCR,  
PLEASE CONTACT OUR CUSTOMER SERVICE  
CENTER.  
Do not use irregularly shaped CDs (e.g., heart-  
shaped or octagonal) since they may result in  
malfunctions.  
• This DVD+VCR requires discs and recordings to  
meet certain technical standards in order to  
achieve optimal playback quality. Pre-recorded  
DVDs are automatically set to these standards.  
There are many different types of recordable disc  
formats (including CD-R containing MP3 or WMA  
files) and these require certain pre-existing condi-  
tions (see above) to ensure compatible playback.  
Selecting the Viewing  
Source  
You must select one of your output sources (DVD or  
VCR) to view on the TV screen.  
Customers should note that permission is  
required in order to download MP3 / WMA files  
and music from the Internet. Our company has  
no right to grant such permission. Permission  
should always be sought from the copyright  
owner.  
If you want to view DVD deck output source:  
Press DVD until DVD indicator in the display  
window lights and output source of DVD deck is  
viewed on the TV screen.  
Regional code  
This unit has a regional code printed on the rear of  
the unit. This unit can play only DVD discs labelled  
same as the rear of the unit or “ALL”.  
If you want to view VCR deck output source:  
Press VCR until VCR indicator in the display  
window lights and output source of VCR deck is  
viewed on the TV screen.  
Notes on Regional Codes  
Most DVD discs have a globe with one or more  
numbers in it clearly visible on the cover. This  
number must match your DVD+VCR’s regional  
code or the disc cannot play.  
Notes:  
If you insert a disc while the DVD+VCR is in the  
VCR mode, the DVD+VCR will switch to DVD  
mode automatically.  
If you try to play a DVD with a different region  
code from your player, the message “Check  
Regional Code” appears on the TV screen.  
If you insert a cassette tape without prevention  
tab while the DVD+VCR is in the DVD mode, the  
DVD+VCR will switch to VCR mode automatically.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Card useable on this unit  
Using Memory Card  
Compact Flash Card (CF)  
Micro Drive (MD)  
1. Insert a memory card.  
2. Press MEMORY on the Front panel while in DVD  
Secure Digital Card (SD)  
Multi Media Card (MMC)  
eXtreme Digital picture Card (xD)  
Memory Stick (MS)  
mode.  
The Memory Card slot choice menu appears on  
the TV screen.  
Memory Stick Pro (MS-Pro)  
Compatible with: FAT 12, FAT 16, or FAT 32  
Only use the memory cards recommended above.  
Regarding Write Protect  
For cards that have a write protect switch, if the  
switch is on it will not be possible to write, erase or  
format the card.  
3. Use v/V to select the desired Memory Card slot  
then press ENTER.  
The PHOTO, MUSIC or MOVIE menu appears on  
the TV screen.  
Inserting/Removing the Memory Card  
4. Press RETURN to return to the Memory Card slot  
choice menu.  
Note:  
For details on each operation item, refer to relevant  
pages.(See page 31-33)  
Insert CF, MD card  
Insert SD, MMC, xD,  
MS, or MS-Pro card  
Inserting the card: Insert straight-in until it fits into  
place.  
Removing the card: Withdraw the card carefully.  
Notes:  
Keep the memory card out of reach of children.  
If swallowed, seek medical advice immediately.  
Some memory cards may not work in this unit,  
depending on the formatting.  
Do not extract the memory card while operating.  
Battery installation  
About the Remote Control  
Detach the battery cover on the rear  
of the remote control, and insert two  
(R03/AAA) size batteries with 3 and  
# aligned correctly.  
Operation Range  
Point the remote control at the remote sensor and  
press the buttons.  
Distance: About 23 ft (7 m) from the front of the  
Do not mix old and new batteries and never  
mix different types of batteries such as stan-  
dard, alkaline, etc.  
remote sensor.  
Angle:  
About 30° in each direction of the front of  
the remote sensor.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Front Panel  
a
b
c
d
e
DVD  
VCR  
REC  
PM  
TV  
f g h i  
j k lmnop q  
a
b
c
d
e
f
1 POWER  
The VCR deck is selected.  
VCR  
Switches the DVD+VCR ON and OFF.  
DVD+VCR is Recording.(VCR part only)  
Indicates PM time. (AM is not displayed.)  
Lights when TV mode is active.  
REC  
PM  
Disc Tray (DVD deck)  
Insert a disc here.  
Z DVD  
Opens or closes the disc tray.  
TV  
Cassette Compartment (VCR deck)  
Insert a video cassette here.  
Indicates total playing time,  
elapsed time, remaining time  
or current deck status  
Z VCR  
Ejects the tape in the VCR deck.  
(Playback, Pause, etc).  
MEMORY CARD SLOT  
Insert a memory card  
(CF, MD, MMC, SD, MS, xD, MS-Pro).  
k
l
Remote Sensor  
Point the DVD+VCR remote control here.  
DVD/VCR (output select)  
Select one of your output sources to view on the TV  
screen between DVD and VCR.  
g
h
MEMORY CARD  
Accesses the menu for memory card.  
CH (V/v)  
m
n
x
To scan up or down through memorized channels.  
Stops playback of the disc or tape.  
i
RESOLUTION  
You can change the resolution depending on your TV.  
- HDMI mode : You can switch among the 480p, 720p  
or 1080i resolution.  
./m  
- DVD: Skip to beginning of current chapter or track,  
press twice in quick successions to go to previous  
chapter or track. Press and hold button for about two  
seconds to search backward.  
- Component mode : You can switch among 480i,  
480p, 720p or 1080i resolution.  
- VCR: Rewinds the tape during the stop mode or for  
fast reverse picture search.  
j
Display Windows  
The DVD deck is selected.  
DVD  
o
p
N
Starts playback of a disc or tape.  
A disc is in the DVD deck.  
(Lights when a disc is in the DVD deck  
and Flashes when no disc.)  
M/>  
DVD: Skip to next chapter or track. Press and hold for  
two seconds for a fast forward search.  
VCR: Advances the tape during the STOP mode or  
for fast forward picture search.  
Indicates when the Progressive scan is  
active.  
[P]  
Indicates repeat mode.  
q
LINE2 (VIDEO/AUDIO (L/R))  
Connect to the audio/video output of an external  
source (Audio system, TV/Monitor, Another VCR).  
DVD+VCR is in timer recording or a timer  
recording is programmed (VCR part only).  
A cassette is in the VCR deck.  
Child Lock is engaged.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
POWER  
TV Control Buttons (see p. 35)  
Switches DVD+VCR ON and OFF.  
DVD  
DISPLAY  
Accesses On-Screen Display.  
Select the DVD+VCR function  
mode to DVD.  
VCR  
Select the DVD+VCR function  
mode to VCR.  
OPEN/CLOSE  
Opens and closes the disc tray.  
CLK/CNT  
Switches between the clock,  
tape counter and tape remain-  
ing modes on the display.  
F
G
D
E
Selects menu options.  
CH/TRK(+/-)  
Selects VCR channels.  
Adjusts manually the tape’s pic-  
ture onscreen.  
EJECT  
Ejects the tape in the VCR deck.  
0-9  
Selects numbered options in a  
menu.  
ENTER/OK  
Confirms menu selections.  
Displays functions on the TV  
screen.  
TV/VCR  
To view channels selected by the  
VCR tuner  
DISC MENU  
Accesses menu on a DVD disc.  
or by the TV tuner.  
SETUP/MENU  
Accesses or removes DVD  
Setup menu and VCR menu.  
INPUT  
Selects the VCR deck’s source  
(Tuner, LINE 1, or LINE 2).  
RETURN  
BACKWARD / FORWARD  
(m / M)  
DVD: Search backward or forward.  
VCR: Rewinds/Advances the tape  
during the STOP mode, for fast back-  
ward/forward picture search.  
Removes the setup menu.  
Displays the menu of a video  
CD with PBC.  
AUDIO  
Selects an audio language  
(DVD) or an audio channel  
(VCD).  
SKIP (. / >)  
Go to next chapter or track.  
Returns to beginning of current  
chapter or track or go to previous  
chapter or track.  
PAUSE/STEP (X)  
Pause playback or recording  
temporarily. Press repeatedly for  
frame-by-frame playback.  
SUBTITLE  
Selects a subtitle language.  
ANGLE  
Selects a DVD camera angle, if  
available.  
ZOOM  
Enlarges DVD video image.  
REC/ITR (O)  
Starts recording. Press repeat-  
edly to set the recording time.  
PLAY (N)  
Starts playback.  
STOP ( Á )  
Stops playback or recording.  
LOCK  
Locks/unlocks front panel but-  
tons.  
MARKER  
Marks any point during playback.  
TITLE  
Displays the disc’s Title menu, if  
available.  
SEARCH  
Displays Marker Search menu.  
PROGRAM  
Places a track on the program  
list.  
CLEAR  
Removes a mark on the Marker  
Search menu.  
REPEAT  
RESOLUTION  
Repeat chapter, track, title or all.  
You can change the resolution  
depending on your TV.  
RANDOM  
Plays tracks in random order.  
* This button is not used.  
CM SKIP  
Fast forwards picture search  
through 30 seconds of recording.  
A-B/  
Repeats sequence between two  
points (A and B).  
SPEED  
Selects recording speed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Rear Panel  
Caution  
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause  
permanent damage to the unit.  
a bcde  
f
g
h
i j  
k
a
b
ANT.IN  
g
RF. OUT  
Connect the VHF/UHF/CATV antenna to this terminal.  
Connect to a TV with RF coaxial inputs.  
VCR IN LINE 1 (VIDEO/AUDIO (Left/Right)) h COAXIAL (DIGITAL AUDIO OUT jack)  
Connect the audio/video output of an external source  
(Audio system, TV/Monitor, VCR, Camcorder).  
(DVD OUT)  
Connect to digital (coaxial) audio equipment.  
c
d
DVD/VCR OUT (VIDEO/AUDIO (Left/Right))  
i
j
S-VIDEO OUT (DVD OUT)  
Connect to a TV with video and audio inputs.  
Connect to a S-Video Input on TV.  
COMPONENT/PROGRESSIVE SCAN VIDEO  
OUT (Y Pb Pr) (DVD OUT)  
Connect to a TV with Y Pb Pr inputs.  
OPTICAL (DIGITAL AUDIO OUT jack)  
(DVD OUT)  
Connect to digital (optical) audio equipment.  
e
f
AUDIO OUT (Left/Right) (DVD OUT)  
k
HDMI OUT  
HDMI output providing a high quality interface for  
digital audio and video.  
Connect to a TV or other equipment with audio inputs.  
AC Power Cord  
Plug into the power source.  
Preparation  
Depending on your TV and other equipment there are various ways you can connect the  
player. Please refer to the manuals of your TV, VCR, stereo system or other devices as nec-  
essary for additional connection information.  
Notes:  
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units  
away from each other or turn off the unit after removing the disc.  
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.  
Do not connect the DVD+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system.  
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection  
system.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view or record a CATV channel  
Connecting an Antenna  
or Cable TV  
1
2
3
Tune the TV to the DVD+VCR output channel  
(CH 3 or 4).  
Set the DVD+VCR channel selector to the cable  
output channel. (Example: CH3)  
a
Antenna:  
Disconnect the antenna from the rear of the TV and  
identify the antenna cable. If it is a round 75 ohm  
coaxial cable connect it directly to the jack marked  
ANT.IN on your DVD+VCR. If your antenna cable is  
flat connect it to a 300-ohm to 75-ohm antenna adap-  
tor (not supplied) and slip the adaptor over the  
ANT.IN jack. Don’t attempt to screw it into to the  
DVD+VCR.  
Select a channel using the cable converter.  
Notes:  
With this connection, you cannot record one pro-  
gram while viewing another.  
If you are using a cable box to tune channels, it is  
not necessary to do Auto Channel Set.  
b
Cable TV:  
If your cable connection has no converter or  
descrambler, unscrew the cable from your TV and  
attach it to the ANT.IN jack on the DVD+VCR. If a  
converter is required connect a coaxial cable from the  
wall jack to the IN connector on the converter, and a  
coaxial cable from the OUT connector on the convert-  
er to the ANT.IN on your DVD+VCR. This cable  
hookup permits both TV and DVD+VCR operation.  
Basic TV Connections  
Make one of the following connections, depending on  
the capabilities of your TV.  
RF coaxial connection  
Connect the RF.OUT jack on the DVD+VCR to the  
antenna in jack on the TV using the supplied 75-ohm  
Coaxial Cable (R).  
a
Antenna  
Antenna  
How to set the DVD+VCR’s RF output  
channel  
1. When the DVD+VCR is turned off, press and hold  
CH (V/v) on the front panel for more than five  
seconds. “RF03” or “RF04” appears in the display  
window.  
OR  
OR  
2. Press CH (V/v) to change the RF output channel  
(RF03 or RF04). Tune the TV to this channel.  
3. Turn off the DVD+VCR.  
Audio/Video connection  
1. Connect the DVD/VCR VIDEO OUT jack on the  
DVD+VCR to the video in jack on the TV using  
the video cable supplied (V).  
2. Connect the Left and Right DVD/VCR AUDIO  
OUT jacks on the DVD+VCR to the audio left/right  
in jacks on the TV (A1) using the supplied audio  
cables.  
Rear of DVD+VCR  
b
Notes:  
If you use this connection, set the TV’s source  
selector to VIDEO.  
For DVD/VCR VIDEO OUT jack connection,  
resolution must be set to 480i or 480p, however  
DVD/VCR VIDEO OUT is always at 480i standard  
resolution.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connect the COMPONENT/PROGRESSIVE SCAN  
VIDEO OUT jacks on the DVD+VCR to the corre-  
sponding in jacks on the TV using an optional Y Pb  
Pr cable (C).  
Rear of TV  
ANTENNA  
INPUT  
VIDEO  
INPUT  
AUDIO INPUT  
R
L
Notes:  
R
V
A1  
The 480p and 720p resolutions are Progressive  
scan applied resolutions.  
Rear of DVD+VCR  
Progressive scan does not work with the analog  
video connections (yellow VIDEO OUT jack and  
S-VIDEO OUT jack).  
Resolution setting  
The resolution setting support only DVD playback.  
1. Before you set the resolution, this unit must be in  
stop mode. Press STOP to stop playback.  
2. Press RESOLUTION once. The current resolution  
setting will be appears in the display window.  
C
A2  
S
3. Press RESOLUTION repeatedly to change the  
resolution you want.  
The available resolution according to the connections  
are as shown below.  
Y
Pr  
Pb  
R
L
COMPONENT/PROGRESSIVE SCAN  
VIDEO INPUT  
AUDIO INPUT  
S-VIDEO  
INPUT  
OUTPUT  
CONNECTIONS  
HDMI  
Available  
Resolutions  
1920 x 1080i  
1280 x 720p  
720 x 480p  
1920 x 1080i  
1280 x 720p  
720 x 480p  
720 x 480i  
Rear of TV  
VIDEO OUT  
Optional TV Connections  
These connections support only DVD playback. The  
tuner and VCR still output through the RF.OUT (R) or  
DVD/VCR OUT (A, V) jacks.  
COMPONENT  
VIDEO OUT  
Audio connection  
VIDEO OUTi  
S-VIDEOi  
720 x 480i  
720 x 480i  
Connect the Left and Right AUDIO OUT jacks of the  
DVD+VCR to the audio left/right in jacks on the TV  
using the supplied audio cables (A2).  
Note:  
For 720p and 1080i resolution on the component  
video out, only non-copy protected discs can be  
played back.If the disc is copy protected, it will be  
displayed at the 480p resolution without HDMI  
cable connection. With HDMI cable connection,  
the picture may not be displayed properly  
S-Video connection  
Connect the S-VIDEO OUT jack on the DVD+VCR  
to the S-Video in jack on the TV using the optional  
S-Video cable (S).  
Note:  
If your TV does not support the resolution you  
have set, the picture may not be displayed  
properly. Please read TV’s owner’s manual then  
set the resolution that your TV can accept.  
For S-Video connection, resolution must be set to 480i  
or 480p, however S-VIDEO OUT is always at 480i  
standard resolution.  
Component Video / Progressive Scan  
connection  
If your television is a high-definition or “digital ready”  
television, you may take advantage of the  
DVD+VCR’s progressive scan output for the highest  
video resolution possible.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI Connection  
HDMI compatible TV  
HDMI  
If you have a HDMI TV or monitor, you can connect it  
to this DVD+VCR using a HDMI cable.  
1. Set the TV’s source to HDMI (refer to TV’s  
Owner’s manual).  
H
2. Connect the HDMI OUT jack on the unit to the  
HDMI jack on a HDMI compatible TV or  
monitor (H).  
3. Press RESOLUTION repeatedly to select the  
desired resolution.  
Notes :  
Rear of DVD+VCR  
Both PCM and Bitstream Audio out are available,  
when the sample frequency is set to 48kHz in  
HDMI connection.  
About HDMI  
If Audio setup is set to bitstream and your TV  
does not support Bitstream Audio out in HDMI  
connection, audio sound may not output or  
distorted.  
HDMI (High Definition Multimedia Interface) supports  
both video and audio on a single digital connection  
for use with DVD players, Set-Top boxes, and other  
AV devices.  
HDMI was developed to provide the technologies of  
HDCP (High-bandwidth Digital Content Protection).  
HDCP is used to protect digital content transmitted  
and received.  
When the no sound or noisy sound are output  
with HDMI connection, set the Audio option [Dolby  
Digital, DTS or MPEG] in the SETUP menu to  
PCM or Off.  
The arrow on the cable connector body should be  
face up for correct alignment with the connector  
on the DVD+VCR.  
HDMI has the capability to support standard,  
enhanced, or high-definition video plus standard to  
multi-channel surround-sound audio, HDMI features  
include uncompressed digital video, a bandwidth of  
up to 5 gigabytes per second, one connector (instead  
of several cables and connectors), and communica-  
tion between the AV source and AV devices such as  
DTVs.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of  
HDMI licensing LLC.  
If there is noise or lines on the screen, please  
check the HDMI cable.  
Not all HDCP-compatible DVI devices will work  
with this unit.  
If your HDMI TV does not support HDCP,  
the blue screen appears on the screen.  
Tip:  
When you use HDMI connection, you can change the  
resolution (480p, 720p, 1080i) for the HDMI output.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to an Amplifier  
Rear of DVD+VCR  
You can only listen to DVD playback using OPTICAL  
(O), COAXIAL (X) and AUDIO OUT (A2) connections.  
The tuner and VCR will still be heard through the  
RF.OUT (R) or DVD/VCR AUDIO OUT (A1) jack.  
(See page 12.)  
Connecting to an amplifier equipped with two  
channel analog stereo or Dolby Pro Logic II/Pro  
Logic  
O
A1  
A2  
X
Connect the Left and Right AUDIO OUT (or  
DVD/VCR AUDIO OUT) jacks on the DVD+VCR to  
the audio left and right in jacks on your amplifier,  
receiver, or stereo system using the audio cables  
(A1, A2) supplied.  
R
L
COAXIAL  
OPTICAL  
AUDIO INPUT  
DIGITAL INPUT  
Amplifier (Receiver)  
Connecting to an amplifier equipped with two  
channel digital stereo (PCM) or to an Audio/Video  
receiver equipped with a multi-channel decoder  
(Dolby Digital™, MPEG 2, or DTS)  
Manufactured under license from Dolby  
Laboratories. “Dolby”, “Pro Logic”, and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
1. Connect one of the DVD+VCR’s DIGITAL AUDIO  
OUT jacks ( OPTICAL O, COAXIAL X) to the cor-  
responding in jack on your amplifier. Use an  
optional digital (OPTICAL O, COAXIAL X) audio  
cable.  
DTS and DTS Digital Out are trademarks of  
Digital Theater Systems, Inc.  
2. You will need to activate the DVD+VCR’s digital  
output. (See “AUDIO” on page 18).  
Accessory Audio/Video (A/V) Connections to  
DVD+VCR  
Connect the VCR IN LINE 1 or LINE 2 jacks on the  
DVD+VCR to the audio/video out jacks on your  
accessory component, using the optional audio/video  
cables. (Refer to page 25 for “Recording from  
External Components”.)  
Digital Multi-channel sound  
A digital multi-channel connection provides the best  
sound quality. For this you need a multi-channel  
Audio/Video receiver that supports one or more of the  
audio formats supported by your DVD+VCR (MPEG  
2, Dolby Digital and DTS). Check the receiver manual  
and the logos on the front of the receiver.  
Caution:  
Due to the DTS Licensing agreement, the digital  
output will be in DTS digital out when DTS audio  
stream is selected.  
Notes:  
If the audio format of the digital output does not  
match the capabilities of your receiver, the  
receiver will produce a strong, distorted sound or  
no sound at all.  
Six Channel Digital Surround Sound via digital  
connection can only be obtained if your receiver is  
equipped with a Digital Multi-channel decoder.  
To see the audio format of the current DVD in the  
on-screen display, press AUDIO.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO CLOCK SET  
Initial Settings - VCR  
The Auto Clock Set feature is set to ON at the fac-  
tory. In the ON setting, the DVD+VCR looks for a  
channel carrying XDS (Extended Data Services)  
information. XDS updates the clock using the  
Coordinated Universal Time.  
By using the VCR Setup menu, you can make  
various adjustments to items such as clock setting,  
and timer recordings.  
- Use b / B to choose ON or OFF.  
Your DVD+VCR allows remote control adjustment of  
several features.  
DAYLIGHT SAVINGS  
You can turn Daylight Savings On or Off manually.  
If you choose “AUTO”, the DVD+VCR sets the  
clock using the DST information broadcast in the  
signal (channel).  
General Operation  
1. Press VCR on the remote control.  
- Use b / B to choose AUTO, ON or OFF.  
2. Press MENU and the MAIN menu will appear.  
TIME ZONE  
You can set your local Time Zone manually. If you  
choose “AUTO”, the DVD+VCR sets the clock  
using the first Coordinated Universal Time informa-  
tion it finds in a broadcast signal.  
- Use b / B to choose the correct time zone  
(AUTO, EASTERN, CENTRAL, MOUNTAIN,  
PACIFIC, ALASKA or HAWAII).  
Notes:  
3. Use v / V to select the desired menu, then press  
The Auto Clock feature enables the DVD+VCR to  
set up the clock while the DVD+VCR is turned off.  
ENTER/OK.  
There are cases where the TV station does not  
send or sends wrong date and/or time information  
and the DVD+VCR sets the incorrect time. If this  
happens we recommend that you set the clock  
manually.  
4. Use v / V to choose a desired option on the seleted  
Menu. Then use b / B to choose a desired setting.  
5. Press MENU when finished.  
Note:  
Manual Clock Set  
Menus remain on-screen for 3 minutes.  
Use v / V / b / B to enter the necessary information.  
MONTH : Choose the month.  
DAY : Choose the date.  
The day of the week will display automatically.  
CLOCK  
YEAR : Choose the year.  
The DVD+VCR gives you two ways to set the time  
and date: the Auto Clock Feature or Manually.  
TIME : Choose the time.  
Press and hold b / B to advance clock continuously.  
Auto Clock Set  
Notes:  
If setting the clock manually, “AUTO CLOCK SET”  
must set to “OFF”. If it is set to “ON”, an incorrect  
date and/or time will be entered again when the  
DVD+VCR is turned off.  
The clock uses the 12-hour system. Be sure to  
set AM and PM correctly.  
PROGRAM  
The Timer Recording function allows you to record up  
to 8 programs within a period of one year. (See pages  
23-24).  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TUNING  
SETUP  
This DVD+VCR is equipped with a frequency synthe-  
sized tuner capable of receiving up to 181 channels.  
These include VHF channels 2-13, UHF channels  
14-69 and CATV channels 1-125.  
Auto Channel Programming  
FUNCTION OSD  
The on-screen display can be turned on or off.  
AUDIO MODE  
The DVD+VCR has two separate audio playback sys-  
tems, the high quality VHS Hi-Fi system and standard  
NORMAL mono system. The same audio is generally  
recorded on both systems. The VHS Hi-Fi system  
plays on separate (left and right) channels, and the  
NORMAL system plays monaural sound. The normal  
track is always played so the cassette can be played  
on a DVD+VCR that does not have VHS Hi-Fi.  
1. Choose the SOURCE SELECT option, then use  
b / B to select TUNER.  
Use b / B to switch among TUNER, LINE1, and  
LINE2.  
2. Choose the AUTO CHANNEL SET option, then  
use b / B to find channels.  
• The tuner will automatically cycle through all  
available channels (TV/CATV) in the area and  
place them in the tuner’s memory.  
BROADCAST TYPE (STEREO/SAP/MONO)  
Multichannel Television Sound (MTS) carries stereo  
and/or Second Audio Program (SAP) bilingual sig-  
nals. Set this display to the desired position when  
both MTS stereo and SAP signals are received.  
When only one of the MTS signal is received, the  
DVD+VCR automatically selects the corresponding  
receiving mode (Stereo or SAP) regardless of the  
selected position. For normal operation, the display  
should be in the STEREO position. The DVD+VCR  
will then record a STEREO program when available,  
and record a mono program IF the program is NOT  
IN STEREO. For weak STEREO and/or SAP broad-  
casts, changing the display to mono may give clearer  
sound.  
• After the AUTO CHANNEL SET is complete, the  
TUNING menu will hide and return to the TV  
screen automatically.  
3. Make sure the TUNING BAND is set appropriately  
(TV or CATV).  
• TV : If you are using a standard antenna to  
receive channels.  
• CATV : If you are using basic cable to receive  
channels.  
To Add or Erase Channels  
This feature allows you to add or erase channels  
from memory manually.  
AUDIO OUTPUT (STEREO/LEFT/RIGHT)  
Used during playback [when AUDIO MODE (HI-  
FI/NORMAL) is in HI-FI position] for selecting the  
audio output signals from the AUDIO OUT terminals  
(L ch and R ch), and RF.OUT. This display setting  
should normally be left in the stereo position, so that  
when a stereo tape is played, the stereo sound will  
be heard through the left and right channels. If a  
mono tape is played and the audio output is set to  
stereo, the same mono sound will be heard from both  
left and right channels.  
1. Choose the CH. ADD/DEL option, then use b / B  
to select a channel to add or erase.  
2. Use ENTER/OK to add or erase the channel.  
Repeat steps 1 and 2 to add or erase other  
channels.  
3. Press MENU to return to the TV screen.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying Disc Information  
on-screen - DVD  
Initial Settings - DVD  
By using the DVD Setup menu, you can make vari-  
ous adjustments to items such as picture and sound.  
You can also set a language for the subtitles and the  
Setup menu, among other things. For details on each  
Setup menu item, see pages 18 to 20.  
You can display various information about the disc  
loaded on-screen.  
1. Press DISPLAY to show various playback infor-  
mation.  
To display and exit the Menu:  
The items displayed differ depending on the disc  
type or playing status.  
Press SETUP/MENU to display the menu. A second  
press of SETUP/MENU will take you back to initial  
screen.  
1 / 3  
1 / 12  
To go to the next level:  
Press B on the remote control.  
To go back to the previous level:  
0:20:09  
Press b on the remote control.  
ABC  
1 ENG  
General Operation  
1 / 1  
1. Press DVD on the remote control.  
3D SUR  
2. Press SETUP/MENU. The Setup menu appears.  
3. Use v / V to select the desired option then press  
B to move to the second level. The screen shows  
the current setting for the selected item, as well  
as alternate setting(s).  
2. You can select an item by pressing v / V and  
change or select the setting by pressing b / B.  
Title (Track) – Current title (or track)  
number/total number of titles (or tracks)  
Chapter – Current chapter number/total number  
of chapters  
Time – Elapsed playing time  
Audio – Selected audio language or channel  
Subtitle – Selected subtitle  
4. Use v / V to select the second desired option  
then press B to move to the third level.  
5. Use v / V to select the desired setting then press  
ENTER/OK to confirm your selection. Some items  
require additional steps.  
Angle – Selected angle/total number of angles  
Sound – Selected sound mode  
6. Press SETUP/MENU or PLAY (N) to exit the  
Setup menu.  
Note:  
If no button is pressed for a few seconds, the on-  
screen display disappears.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LANGUAGE  
AUDIO  
Each DVD disc has a variety of audio output options.  
Set this unit’s AUDIO options according to the type of  
audio system you use.  
Menu Language  
Select a language for the VCR and DVD’s setup  
menu and information display.  
Dolby Digital / DTS / MPEG  
Disc Audio / Subtitle / Menu  
Bitstream: Select “Bitstream” if you connect the  
DVD+VCR’s DIGITAL AUDIO OUT jack to an  
amplifier or other equipment with a Dolby Digital,  
DTS or MPEG decoder.  
Select the language you prefer for the audio track  
(disc audio), subtitles, and the disc menu.  
Original: Refers to the original language in which the  
PCM (for Dolby Digital / MPEG): Select when  
connected to a two-channel digital stereo amplifi-  
er. DVDs encoded in Dolby Digital or MPEG will  
be automatically downmixed to two-channel PCM  
audio.  
disc was recorded.  
Other: To select another language, press number  
buttons then ENTER/OK to enter the corresponding  
4-digit number according to the language code list in  
the reference chapter (see page 36). If you enter the  
wrong language code, press CLEAR.  
Off (for DTS): If you select “Off”, the DTS signal  
is not output through the DIGITAL AUDIO OUT  
jack.  
Off (for Disc Subtitle) : Turn off Subtitle.  
Sample Freq. (Frequency)  
DISPLAY  
If your receiver or amplifier is NOT capable of han-  
dling 96 kHz signals, select 48 kHz. When this choice  
is made, this unit automatically converts any 96 kHz  
signals to 48 kHz so your system can decode them.  
If your receiver or amplifier is capable of handling 96  
kHz signals, select 96 kHz. When this choice is  
made, this unit passes each type of signal through  
without any further processing.  
Check the documentation for your amplifier to verify  
its capabilities.  
DRC (Dynamic Range Control)  
TV Aspect  
With the DVD format, you can hear a program’s  
soundtrack in the most accurate and realistic presen-  
tation possible, thanks to digital audio technology.  
However, you may wish to compress the dynamic  
range of the audio output (the difference between the  
loudest sounds and the quietest ones). This allows  
you to listen to a movie at a lower volume without los-  
ing clarity of sound. Set DRC to On for this effect.  
4:3 :  
Select when a standard 4:3 TV is connected.  
16:9 : Select when a 16:9 wide TV is connected.  
Display Mode  
Display Mode setting works only when the TV Aspect  
mode is set to “4:3”.  
Letterbox: Displays a wide picture with bands on the  
upper and lower portions of the screen.  
Vocal  
Set to On only when a multi-channel karaoke DVD is  
playing. The karaoke channels on the disc mix into  
normal stereo sound.  
Panscan: Automatically displays the wide picture on  
the entire screen and cuts off the portions that do not  
fit.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Password (Security Code)  
LOCK (Parental Control)  
You can enter or change password.  
1. Select “Password” on the LOCK menu then press  
B.  
2. Follow step 2 as shown previous page (Rating).  
To change the password, select the “Change”,  
press ENTER/OK and input the new 4-digit code  
then press ENTER/OK. Input it again to verify.  
3. Press SETUP/MENU to exit the menu.  
Rating  
If you forget your Security Code  
Some movies contain scenes that may not be suitable  
for children to view. Many of these discs contain  
parental control information that applies to the complete  
disc or to certain scenes on the disc. Movies and  
scenes are rated from 1 to 8, depending on the area.  
DVD video discs may or may not respond to the  
parental control setting if the Area code of the disc is  
set wrongly. Some discs offer more suitable scenes as  
an alternative. Ratings are area dependent.  
If you forget your security code you can clear it using  
the following steps:  
1. Press SETUP/MENU to display the Setup menu.  
2. Input the 6-digit number “210499” and the security  
code is cleared.  
3. Enter a new code as described above.  
The parental control feature allows you to block  
access to scenes below the rating you input, thereby  
preventing your children from being able to view  
material you believe is unsuitable.  
Area Code  
Enter the Area Code whose standards were used to  
rate the DVD video disc, based on the list in the  
reference chapter (see page 36).  
1. Select “Rating” on the LOCK menu then press B.  
1. Select “Area Code” on the LOCK menu then  
2. To access the Rating, Password and Area Code  
features, you must input the 4-digit security code  
you created.  
press B.  
2. Follow step 2 as shown previous page (Rating).  
If you have not yet entered a security code you are  
prompted to do so. Input a 4-digit code and press  
ENTER/OK. Enter it again and press ENTER/OK  
to verify. If you make a mistake before pressing  
ENTER/OK, press CLEAR.  
3. Select the first character using v / V buttons.  
4. Press B and select the second character using  
v / V buttons.  
5. Press ENTER/OK to confirm your area code  
selection.  
3. Select a rating from 1 to 8 using the v / V buttons.  
1-8: Rating one (1) has the most restrictions and  
rating eight (8) is the least restrictive.  
Unlock : If you select unlock, parental control is  
not active and the disc plays in full.  
Note:  
If you set a rating for the player, all disc scenes with  
the same rating or lower are played. Higher rated  
scenes are not played unless an alternate scene is  
available on the disc. The alternative must have the  
same rating or a lower one. If no suitable alternative  
is found, playback stops. You must enter the 4-digit  
password or change the rating level in order to play  
the disc.  
4. Press ENTER/OK to confirm your rating selection,  
then press SETUP/MENU to exit the menu.  
5. Press OPEN/CLOSE (Z) to activate parental  
control.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DivX(R) VOD  
OTHERS  
We provide you the DivX® VOD (Video On Demand)  
registration code that allows you to rent and purchase  
videos using the DivX® VOD service. For more infor-  
1. Select “DivX(R) VOD” option then press B.  
2. Press ENTER/OK while “Select” is selected and  
the registration code will appear.  
Use the registration code to purchase or rent the  
videos from DivX® VOD service at  
download the video onto a disc for playback on  
this unit.  
PBC  
Set Playback Control (PBC) to On or Off.  
3. Press ENTER/OK to exit.  
On: Video CDs with PBC are played according to  
the PBC.  
Note:  
All the downloaded videos from DivX® VOD can only  
be played back on this unit.  
Off: Video CDs with PBC are played the same  
way as Audio CDs.  
Auto Play  
You can set up the DVD+VCR so a DVD disc auto-  
matically starts playing whenever the DVD is insert-  
ed.  
If Auto Play mode is set to On, this DVD player will  
search for title that has the longest playback time and  
then play back the title automatically.  
On: Auto Play function is active.  
Off: Auto Play function is not active.  
Note:  
The Auto Play function may not work for some DVDs.  
B.L.E. (Black Level Expansion)  
To select the black level of playback pictures. Set  
your preference and monitor’s ability.  
On: Expanded grey scale. (0 IRE cut off)  
Off: Standard grey scale. (7.5 IRE cut off)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations - VCR  
This chapter describes how to operate the VCR and  
DVD.  
Manual Tracking  
To manually adjust the tracking use the CH/TRK (v/V)  
buttons on the remote control or CH (v/V) on the front  
panel during playback.  
VCR Tape Playback  
Press the VCR button to select the device to be oper-  
ated.  
Notes:  
Vertical jitter requires a very fine adjustment.  
Tracking is automatically reset to normal when the  
tape is ejected or the power cord is unplugged for  
more than 3 seconds.  
Basic Instructions  
1. Turn on the TV.  
2. Tune the TV to the DVD+VCR output channel  
(CH 3 or 4) or if a direct VIDEO/AUDIO  
Search  
connection is made between the DVD+VCR and  
the TV, set the TV’s source selector to VIDEO.  
This function lets you visually search for a tape sec-  
tion in either direction: forward and reverse. During  
the high-speed picture search modes, the audio is  
muted and horizontal lines (noise bars) appear. Also,  
a short time is needed to stabilize the tape speed  
when re-entering the PLAY mode so slight interfer-  
ence may be observed during this time.  
3. Insert a pre-recorded video cassette.  
The  
indicator lights and the DVD+VCR  
powers on automatically.  
4. If the (TIMER) indicator in the display window  
is lit, press POWER (1) once.  
To search:  
5. If a tape without a safety tab is inserted the unit  
starts playback automatically.  
1. Press BACKWARD (m) or FORWARD (M)  
during playback.  
If not, press PLAY (N).  
2. To return to playback, press PLAY (N).  
6. Press STOP (x) to stop playback. If the tape  
reaches the end before you press STOP (x) the  
DVD+VCR automatically stops, rewinds and  
ejects the tape.  
Note:  
After 3 minutes in SEARCH mode the DVD+VCR  
returns to PLAY mode to protect the tape and video  
heads.  
Note:  
It is not necessary to select the tape speed for play-  
back because it is automatically selected by the  
DVD+VCR. Also, during playback the TV/VCR selec-  
tor switches to VCR mode automatically.  
Still Picture and Frame-by-Frame Playback  
1. Press PAUSE/STEP (X) during playback.  
A still picture appears on the TV screen and the  
audio is muted.  
Auto Tracking  
2
If the still picture vibrates vertically, stabilize it by  
using CH/TRK (v/V) on the remote control.  
Automatic tracking adjusts the picture to remove  
snow or streaks and beings when:  
3. Press PAUSE/STEP (X) repeatedly to advance  
A tape is played for the first time.  
the video picture one frame at a time.  
The tape speed (SP, LP, SLP) changes.  
4. To return to playback, press PLAY (N).  
Streaks or snow appear due to scratches on the  
tape.  
Note:  
After 5 minutes in STILL mode the DVD+VCR stops  
to protect the tape and video heads.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slow Motion  
1. While in still mode, press FORWARD (M). The  
tape is played at a speed 1/19 times slower than  
the normal speed.  
2. Use CH/TRK (v/V) on the Remote Control if  
necessary to adjust the tracking.  
2. Set the AUDIO OUTPUT option to STEREO so  
that the left channel sound (L) is heard from the  
left speaker and the right channel sound (R) is  
heard from the right speaker.  
3. To return to the normal speed, press  
PLAY (N).  
Notes:  
During slow motion, audio is muted and horizontal  
lines (noise bars) may appear on the TV  
screen.This is normal.  
After 3 minutes in SLOW MOTION mode the  
DVD+VCR goes back to PLAY mode to protect  
the tape and video heads.  
CM SKIP (Commercial Skip)  
The other options are (LEFT) POSITION, which  
results in the left channel sound (L) being heard  
from both speakers or (RIGHT) POSITION, which  
results in the right channel sound (R) being heard  
from both speakers.  
This feature is useful for skipping commercials or  
short program segments.  
1. Press CM SKIP in playback mode.  
The DVD+VCR performs a fast forward picture  
search through 30 seconds of recording.  
3. Insert a cassette and press PLAY (N).  
2. Press CM SKIP again to extend the search time  
by an addition 30 seconds. The maximum search  
time is 3 minutes.  
MTS (Multi-Channel TV Sound)  
3. When the search is complete, the DVD+VCR  
goes into playback mode automatically.  
This DVD+VCR can decode MTS stereo and bilingual  
(SAP) off-the-air broadcast sound signals. It also  
decodes stereo TV sound from local cable companies  
as long as they operate on assigned cable frequen-  
cies and use the EIA-recommended MTS stereo/bilin-  
gual TV sound system.  
VHS Hi-Fi Stereo/  
MTS Broadcast  
Multichannel TV Sound Indicator (MTS)  
When you press ENTER/OK one or both of the indi-  
cators appears on the TV Screen.  
This DVD+VCR is equipped with the VHS Hi-Fi audio  
sound system for recording and playback. The infor-  
mation below gives a brief description of Hi-Fi audio  
and how to record and play a tape in the Hi-Fi audio  
mode.  
STEREO  
The DVD+VCR can record in stereo onto the VHS  
Hi-Fi audio tracks when the BROADCAST TYPE  
option is in the STEREO position. The DVD+VCR  
can also record mono audio onto the mono audio  
track.  
Hi-Fi Stereo Audio Sound  
A stereo TV with AUDIO/VIDEO input jacks or a  
stereo audio system is required for true stereo play-  
back. To experience the full and rich stereo sound  
available with Hi-Fi recorded tapes, we recommend  
the connection of this unit to a home stereo audio  
system.  
SAP  
Some stations transmit a Second Audio Program,  
which is used for a second language or additional  
information.  
1. Set the AUDIO MODE option to HI-FI on the VCR  
SETUP menu .  
STEREO/SAP  
Use the BROADCAST TYPE option to select the  
desired recording mode (STEREO or SAP).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To record one TV program while watching  
another  
VCR Tape Recording  
Basic Instructions  
1. Press TV/VCR to select the TV mode during  
recording. The TV indicator appears.  
1. Turn on the DVD+VCR and TV.  
2. Using the TV, select the channel to be viewed.  
2. Tune the TV to the DVD+VCR output channel  
(CH 3 or 4) or if a direct VIDEO/AUDIO connec-  
tion is made between the DVD+VCR and the TV,  
set the TV’s source selector to VIDEO.  
Timer Recording  
3. Insert a video cassette with the safety tab intact.  
For unattended recording, you must input the  
channels to be recorded and the starting and ending  
times.  
4. Select the desired channel using CH/TRK (v/V).  
5. If you are recording from another source via  
audio/video input jacks (at the rear or front panel),  
select LINE1 or LINE2 using INPUT.  
Things to know before starting  
If you try to set the program timer before setting  
the clock, “PLEASE SET THE CLOCK” appears  
for a moment and then CLOCK menu appears on  
the TV screen. Set the time and date before  
proceeding.  
6. Set the desired recording speed (SP or SLP) by  
pressing SPEED. This DVD+VCR is not designed  
to record in LP mode.  
7. Set the MTS mode (STEREO or SAP). Set the  
BROADCAST TYPE option to SAP if applicable.  
1. Turn on the DVD+VCR and the TV.  
8. Press REC/ITR (z) and recording starts. The  
REC indicator appears in the display window. If a  
cassette with no safety tab is loaded, the cassette  
is ejected.  
2. Be sure the TV is set to the DVD+VCR output  
channel (3 or 4).  
3. Make sure the TUNING BAND in the TUNING  
menu is set appropriately (TV or CATV).  
9. Press STOP (x) to stop recording. If the tape  
reaches the end before STOP (x) is pressed, the  
DVD+VCR stops, rewinds and ejects the tape.  
4. Press MENU and the MAIN menu appears.  
5. Use v / V to choose the PROGRAM menu and  
Tip:  
press ENTER/OK.  
Use PAUSE/STEP (X) for best results when making  
changes while recording. For example, if you want to  
change channels while recording, first press  
PAUSE/STEP (X) to put the unit in pause mode,  
select the desired channel on the DVD+VCR, and  
then press PAUSE/STEP (X) again to resume  
recording.  
Note:  
If eight programs are already entered, the FULLY  
PROGRAMMED message appears for a moment  
and then PROGRAM 1 appears on the TV  
screen.  
During the VCR recording mode, you cannot change  
to the DVD mode.  
To pause the recording  
6. Use the v / V buttons to switch between the  
program options, and the b / B buttons to input  
the program information:  
1. Press PAUSE/STEP (X) to pause the tape during  
recording. The REC indicator flashes in the display  
window.  
Input the month, day, start and stop times of the  
program you want to record.  
2. When you want to continue recording, press  
PAUSE/STEP (X) or press REC/ITR (z).  
After 5 minutes in PAUSE mode, the DVD+VCR  
stops automatically to protect the tape and the  
video heads.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CHANNEL: Select a TV channel, LINE1 or  
LINE2.  
Checking or Erasing the Timer Program  
If you have CABLE TV and use a cable box (con-  
verter) you must set the channel to match the  
cable box output channel (usually CH 3 or 4).  
Change channels on the cable box instead of with  
the DVD+VCR. If you use a cable converter, you  
can program multiple recordings only on the con-  
verter box output channel. This is because the  
converter determines what channel you view  
through your DVD+VCR.  
Programming can be checked whenever the  
DVD+VCR is turned on.  
1. Press MENU and the MAIN menu appears.  
2. Use v / V to choose the PROGRAM menu and  
press ENTER/OK.  
SPEED: AUTO mode determines how much tape  
is left and switches the speed from SP to SLP if it  
is necessary to complete recording the program. If  
this occurs there could be some picture and  
sound distortion at the point where the speed  
changes.  
3. Use b / B to select a program you want to check  
or erase. To erase the program, press CLEAR.  
REPEAT: To record up to 8 programs on a certain  
day of every week select WEEKLY. To record up  
to 8 programs at the same time Monday through  
Friday select DAILY. Otherwise select ONCE.  
4. Press MENU to return to the TV screen.  
Program Priority  
7. Press MENU and the program is memorized by  
the DVD+VCR.  
If the recording start and end times of preset pro-  
grams overlap on the same day (see the example),  
the second program is not recorded until the first is  
finished.  
8. Additional programs may be entered by repeating  
steps 1-7.  
9. Ensure you insert a tape with the record safety  
tab intact before the first programmed time.  
10. Press STOP (x) to end timer recording.  
Notes:  
If you make a mistake or want to change a set-  
ting, use v to select the option and correct it  
using b / B.  
In this example, the first part of program numbers 2  
and 3 are not recorded.  
If the program preset time is past, the “PAST  
TIME PROGRAMMED” message appears on the  
TV screen. Return to the incorrect program and  
program it with the correct time.  
If you enter a past date, the timer recording will  
be performed on that date of the next year.  
If the power fails or the DVD+VCR is unplugged  
the clock and timer settings are kept in memory  
for only 3 seconds. Otherwise you must reset the  
clock and timer.  
If the tape indicator is blinking, no tape is loaded.  
When you are playing DVD at programmed  
Recording time, the DVD+VCR automatically  
change to VCR mode and start recording.  
The DVD+VCR will automatically power off when  
Timer Recording ends.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extending the Recording Time  
Instant Timer Recording  
The recording time can be extended anytime by  
pressing REC/ITR (z). Subsequent presses result in  
advancing the recording time by 30-minute  
increments.  
With this feature you can record for a preset length  
without using the program timer.  
1. Turn on DVD+VCR and the TV.  
2. Be sure the TV is tuned to the DVD+VCR output  
channel (CH 3 or 4). If a direct VIDEO/AUDIO  
connection is made between the DVD+VCR and  
the TV, set the TV’s source selector to VIDEO.  
Note:  
If you press PAUSE/STEP (X) during instant timer  
recording, the instant timer recording is cancelled.  
3. Insert a video cassette with the safety tab intact.  
4. Select the desired channel using CH/TRK (v/V)  
or the number buttons (0-9). The channel number  
appears on the TV screen. If you are recording  
from another source via audio/video input jacks  
(at the rear or front panel), select LINE1 (rear  
jacks) or LINE2 (front jacks) by using INPUT.  
Recording from External  
Components  
You can record from an external component, such as  
a camcorder or VCR, connected to any of the  
DVD+VCR’s external inputs.  
5. Set the desired recording speed (SP or SLP)  
using SPEED. The tape speed appears on the TV  
screen.  
1. Make sure that the component you want to record  
from is connected properly to the DVD+VCR. See  
page 14.  
6. Press REC/ITR (z) twice. The menu appears on  
2. Press INPUT repeatedly to select the external  
input to record from.  
the TV screen, recording starts, and the  
(TIMER) indicator lights.  
LINE1 (L1): Audio/Video Input mounted on  
back panel.  
INSTANT TIMER RECORD  
LINE2 (L2): Audio/Video Input mounted on  
front panel.  
CHANNEL  
SPEED  
2
SP  
3. Load a recordable tape.  
START  
NOW  
LENGTH  
0H30M  
4. Set a recording mode (SP or SLP) as necessary  
by pressing SPEED repeatedly.  
7. Press REC/ITR (z) repeatedly to select the  
recording time length. Each time you press this  
button the recording time increases 30 minutes  
(up to 9 hours). At the end of the recording, the  
DVD+VCR will stop recording and shut off.  
5. Play the tape or disc in the external component. If  
you have a TV attached to your DVD+VCR, you  
can see the video palying.  
6. Press REC/ITR (z) once to start recording.  
The REC indicator lights in the display window.  
If you set the time to 0H00M, the DVD+VCR goes  
into the normal recording mode. Press STOP (x)  
to stop the recording.  
7. Press STOP (x) to stop recording.  
Notes:  
Before recording, confirm the recording start posi-  
tion.  
Note:  
During Instant Timer Recording, you cannot change  
the channel on the DVD+VCR.  
If your source is copy-protected using  
CopyGuard, you will not be able to record it using  
this unit. See Copyright on page 6 for more  
details.  
Checking the Recording Time  
To record for a fixed length of time, see Instant  
Timer Recording.  
Press REC/ITR (z) once to check the recording time.  
The recalled setting automatically returns to the TV  
screen after 6 seconds.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Each press of the ENTER/OK changes the TV screen  
in the following sequence.  
Copying from DVD to VCR  
You can copy the contents of a DVD to a VHS tape.  
STOP  
SP  
CH  
4
STEREO  
1. Insert the disc you wish to copy into the DVD  
deck and close the disc tray.  
APR 30 , SAT  
2:15 PM  
2. Insert a blank VHS video tape into the VCR deck.  
2:15 PM  
0:35:40  
3. Find the place on the DVD from which you want  
to start dubbing using the PLAY, FF, REW and  
PAUSE functions.  
REM 1:58  
For best results, pause playback at the point from  
which you want to record.  
Real-Time Counter  
If a tape with contents recorded on it is inserted into  
the VCR, the real-time counter shows length of the  
tape running in hours, minutes, and seconds. Press  
CLK/CNT to select the real-time counter display.  
Every press of CLK/CNT changes the TV screen as  
illustrated below.  
4. Press the z REC/ITR. The DVD goes into PLAY  
mode and the VCR goes into RECORD mode. If  
the DVD disc menu appears, you may need to  
press PLAY (N) manually to begin copying.  
5. When the DVD is finished playing, press STOP (x)  
to end copying.  
2:15 AM  
CLOCK  
0:05:25  
COUNTER  
REM 1:07  
Notes:  
REMAINING TIME  
If the DVD you are attempting to copy is copy protected,  
you will not be able to copy the disc. It is not permitted  
to copy Macrovision encoded DVDs (or Discs). “Lock” is  
displayed in the display window.  
Counter Memory  
This feature is useful if there is a section of tape you  
want to view immediately after recording or if you  
want to return to the same point several times.  
You must stop the copy process manually when the  
DVD movie ends, or the unit may replay and record over  
and over again.  
1. Begin recording or playing a tape.  
2. Press CLK/CNT until the real-time counter is dis-  
played on the TV screen.  
When you stop the DVD playback during copying, the  
recording on VCR is stopped automatically.  
3. At the point that you want to locate later, reset the  
real-time counter to “0:00:00” by pressing CLEAR.  
4. Continue to play or record.  
5. Press STOP (x) when recording or playback fin-  
ishes.  
On-Screen Display - VCR  
6. Press BACKWARD (m). The tape automatically  
stops when the tape counter returns to about  
“0:00:00”.  
Some of these functions will be displayed every time  
the DVD+VCR is operated.  
Tape Remaining  
This function displays the amount of time remaining  
on the tape during recording or playback. Press  
CLK/CNT repeatedly until the REM indicator displays  
on the TV screen during recording or playback.  
The remaining tape length may not be displayed cor-  
rectly depending on the condition of the tape and the  
kind of the tape (T-140, T-160, or T-210 etc.).  
PLAY  
SP  
HI-FI  
CH 4  
STEREO  
OCT 8 , SAT  
2:15 PM  
Notes:  
The function displays can be seen displayed on the TV  
screen for 5 seconds.  
TAPE SPEED DISPLAY  
FUNCTION DISPLAY  
HI-FI DISPLAY  
STEREO/SAP DISPLAY  
(MONO is not displayed)  
The clock (or tape counter, tape remaining) mode will be  
displayed until you press ENTER/OK.  
DATE DISPLAY  
The tape counter and the remaining tape length indica-  
tor appear only when a cassette is inserted. Also, the  
remaining tape length indicator appears after any tape  
operation.  
CLOCK/ COUNT/  
REMAIN DISPLAY  
CHANNEL DISPLAY  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S-VHS Quasi Playback (SQPB)  
Additional VCR Information  
During manual recording, timer recording, Instant  
Timer Recording, playback, or fast forward  
modes, the DVD+VCR automatically starts  
rewinding the tape at the end of the tape. The  
cassette stops at the beginning of the tape and is  
ejected.  
This DVD+VCR can play back S-VHS recorded  
tapes, however, it cannot make recordings using  
S-VHS format tapes.  
SQPB is an abbreviation for S-VHS Quasi  
Playback.  
After you have finished using the DVD+VCR,  
rewind, eject, and remove the cassette. Place the  
cassette in its protective sleeve to protect it from  
dust. It is not necessary to rewind the cassette  
before removing it, but if you do, it is ready to play  
or record the next time you use it.  
Easy Information  
If the Extended Data Service (XDS) signals are pro-  
vided along with normal TV signal in your area or dur-  
ing playback of a tape recorded with Extended Data  
Service (XDS) signals, the station ID, program title,  
and program details are shown on the TV screen.  
When viewing a channel with Extended Data Service  
(XDS) signals, press ENTER/OK and the station ID  
will appear on the TV screen. Press ENTER/OK again  
and the program details will appear on the TV screen.  
When viewing a tape recorded with Extended Data  
Service (XDS) signals, press ENTER/OK twice and  
the program title and program details will appear on  
the TV screen.  
Be sure the DVD+VCR channel selector is on the  
correct channel you wish to record. The channel  
that is being recorded can always be checked by  
setting the television on the DVD+VCR channel  
(CH 3 or 4) and pressing the TV/VCR to turn the  
DVD+VCR’s TV indicator off.  
Do not attempt to hook up more than one televi-  
sion set to the DVD+VCR for either recording or  
playback.  
Program Details  
LENGTH: Indicates the run length of a program.  
TIME REMAINING: Indicates the remaining time of a  
program.  
RATING: Indicates the rating of the current program  
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The  
rating N/A means that the motion picture ratings are not  
applicable to this program.  
VCR Auto Play System  
This DVD+VCR features automatic playback.  
When you load a tape with the safety tab removed  
the following occurs:  
CH  
4
SP  
WABC  
STEREO  
The Output Source is changed to VCR mode  
automatically.  
The power turns on automatically and playback begins.  
“Home video”  
APR 30 , SAT  
2:15 PM  
At the end of the tape, the DVD+VCR stops, then  
rewinds.  
Easy Information Screen  
(Station ID)  
The tape is ejected after rewinding and the turns itself  
off automatically.  
PROGRAM DETAILS  
“Home video”  
LENGTH 01:00  
TIME REMAINING 00:26  
RATING N/A  
Note:  
Auto power off does not function during regular DVD play  
mode. (DVD+VCR power stays on.)  
Easy Information Screen  
(Program details)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operations - DVD  
Playback Setup  
Turn the TV on and select the video input source connected to this unit.  
Audio System: Turn the Audio System on and select the input source connected to this unit.  
1. Press OPEN/CLOSE (Z) to open the disc tray.  
2. Load your chosen disc in the tray with the playback side down.  
3. Press OPEN/CLOSE (Z) to close the tray.  
READING appears on the display window, and playback starts automatically.  
If playback does not start, press N (PLAY).  
In some cases, the disc menu might appear instead.  
Note:  
If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be  
entered and/or the disc must be authorized (see “Rating”, on page 19).  
General features  
Buttons  
Operations  
Discs  
ALL  
Z (OPEN / CLOSE)  
X (PAUSE)  
Opens or closes the disc tray.  
During playback, press X to pause playback.  
Press X repeatedly to play Frame-by-Frame.  
ALL  
DVD  
VCD  
DivX  
SKIP (. / >)  
During playback, press SKIP (. or >) to go to the  
next chapter/track or to return to the beginning of the cur-  
rent chapter/track.  
ALL  
Press SKIP . twice briefly to step back to the previous  
chapter/track.  
DVD  
ACD  
VCD  
MP3  
DivX  
DivX  
BACKWORD  
During playback, press SCAN (m or M) repeatedly to  
/FORWARD(m / M) select the required scan speed.  
DVD, DivX disc; 4 steps  
Video CD, MP3, Audio CD ; 3 steps  
DVD  
ALL  
VCD  
While the playback is paused, press SCAN M repeated-  
ly to play in slow motion (4 steps, forward only).  
REPEAT  
During playback, press REPEAT repeatedly to select a  
desired repeat mode.  
DVD Video discs: Chapter/Title/Off  
Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off  
Note:  
• If you press SKIP (>) once during Repeat Chapter  
playback, the repeat playback cancels.  
• On a Video CD with PBC, you must set PBC to Off on  
the setup menu to use the repeat function (See “PBC”  
on page 20).  
DVD  
DivX  
VCD  
ACD  
A-B  
During playback, each press of A-B button to select point  
A and point B and repeats a sequence from point A  
(Starting point) to point B (End point).  
Note:  
The A-B repeat function is available only in the current  
track.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Buttons  
Operations  
Discs  
ZOOM  
During playback or pause mode, press ZOOM to enlarge  
the video image (4 steps).  
DVD  
VCD  
DIVX  
You can move through the zoomed picture using b B v V  
buttons. Press CLEAR to exit.  
Note:  
Zoom may not work on some DVDs.  
ACD  
DVD  
MP3  
WMA  
RANDOM  
TITLE  
During playback or in stop mode, press RANDOM for ran-  
dom playback.  
If the current DVD title has a menu, the title menu appears  
on the screen. Otherwise, the disc menu may appears.  
DISC MENU  
(ANGLE)  
The disc menu appears on the screen.  
DVD  
DVD  
During playback of DVD disc contains scenes recorded  
different camera angles, press ANGLE repeatedly to  
select a desired angle.  
Tip:  
The Camera Angle icon is displayed on the TV screen  
when alternate angles are available.  
DVD  
DivX  
DivX  
(SUBTITLE)  
During playback, press SUBTITLE repeatedly to select a  
desired subtitle language.  
DVD  
VCD  
(AUDIO)  
During playback, press AUDIO repeatedly to hear a differ-  
ent audio language or audio track.  
Time Search DVD  
VCD  
DivX  
Additional features  
To start playing at any chosen time on the disc:  
1. Press DISPLAY during playback.  
3D Surround  
To produce a 3D surround effect that simulates multi-  
channel audio from two stereo speakers (instead of  
the five+ speakers normally required for multi-channel  
audio from a home theater system).  
2. Press v / V to select the time clock icon and  
“--:--:--” appears.  
3. Input the required start time in hours, minutes,  
and seconds from left to right. If you enter the  
wrong numbers, press CLEAR to remove the  
numbers you entered. Then input the correct  
numbers.  
DVD  
VCD  
DivX  
1. Press DISPLAY during playback.  
2. Use 3 or 4 to select the sound option.  
4. Press ENTER/OK to confirm. Playback starts from  
the selected time.  
The sound option will be highlighted.  
3. Use 1 or 2 to select “3D SUR”.  
To turn off the 3D Surround effect, select  
“Normal”.  
ACD  
1. Press AUDIO during playback.  
“3D SUR” appears on the menu screen.  
2. To return to normal playback, press AUDIO  
repeatedly until “3D SUR” disappears from the  
menu screen.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marker Search DVD  
To enter a Marker  
VCD  
DivX  
You can start playback from up to nine memorized  
points. To enter a marker, press MARKER at the  
desired point on the disc. The Marker icon appears  
on the TV screen briefly. Repeat to enter up to nine  
markers.  
To Recall or Clear a Marked Scene  
1. During disc playback, press SEARCH. The mark-  
er search menu appears on the screen.  
2. Within 10 seconds, press b / B to select a marker  
number that you want to recall or clear.  
3. Press ENTER/OK and playback starts from the  
marked scene. Or, Press CLEAR and the marker  
number is erased from the list.  
4. You can play any marker by inputting its number  
on the marker search menu.  
Last Scene Memory DVD  
ACD  
VCD1.1  
This player memorizes last scene from the last disc  
that is viewed. The last scene remains in memory  
even if you remove the disc from the player or switch  
off the player. If you load a disc that has the scene  
memorized, the scene is automatically recalled.  
Note:  
This player does not memorize the scene of a disc if  
you switch off the player before commencing to play  
the disc.  
Screen Saver  
The screen saver appears when you leave the  
DVD+VCR in Stop mode for about five minutes.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing an Audio CD or  
MP3/WMA file  
Programmed Playback  
The program function enables you to store your  
favorite tracks from any disc in the player memory.  
A program can contain 30 tracks.  
This unit can play Audio CDs or MP3/WMA files  
recorded media.  
1. Insert an Audio CD or MP3/WMA files recorded  
media. AUDIO CD or MUSIC menu appears.  
MP3/ WMA/ Audio CD  
Once you insert an MP3/WMA files recorded media  
or Audio CD, a menu appears on the TV screen.  
Press v / V to select a track/file then press PLAY or  
ENTER/OK and playback starts. You can use variable  
playback functions. Refer to page 28-30.  
2. During STOP mode, press PROGRAM and  
E
the  
mark will appear  
Note:  
Press PROGRAM again to exit the program edit  
E
mode, then the  
mark will disappear.  
3. Select a track on the “List”, then press  
ENTER/OK to place the selected track on the  
“Program” list. Repeat to place additional tracks  
on the list.  
4. Select the track you want to start playing on the  
“Program” list.  
ID3 TAG  
• When playing a file containing information such as  
track titles, you can see the information by pressing  
DISPLAY. [ Song, Artist, Album, Comment, Genre ]  
5. Press PLAY or ENTER/OK to start. Playback  
begins in the order in which you programmed the  
tracks. Playback stops after all of the tracks on  
the “Program” list have played once.  
• If there is no information, “No ID3 TAG” appear on  
the menu screen.  
6. To resume normal playback from programmed  
playback, select a track on the list and then press  
PLAY.  
Tips:  
If you are in a file list on the “MUSIC” menu and  
Repeat Programmed Tracks  
want to return to the Folder list, use the v / V to  
highlight  
Press REPEAT to select a desired repeat mode.  
and press ENTER/OK.  
• Track: repeats the current track  
• All: repeats all the tracks on programmed list.  
• Off(No display): does not play repeatedly.  
• Press DISC MENU to move to the next page.  
• On a CD with MP3/WMA and JPEG you can switch  
MP3/WMA and JPEG. Press TITLE and MUSIC or  
PHOTO word on top of the menu is highlighted.  
Note:  
If you press > once during Repeat Track playback,  
the repeat playback cancels.  
MP3 / WMA disc compatibility with this player is  
limited as follows:  
• Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
Erasing a Track from “Program” List  
1. During STOP mode, press PROGRAM and  
E
the  
mark will appear  
• Bit rate: within 32 - 320kbps (MP3),  
32 - 320kbps (WMA)  
2. Use v V b B to select the track that you wish to  
erase from the Program list.  
• The player cannot read an MP3/WMA file that  
has a file extension other than “.mp3” / “.wma”.  
• CD-R physical format should be ISO 9660  
• If you record MP3 / WMA files using software  
that cannot create a file system (eg. Direct-CD)  
it is impossible to playback MP3 / WMA files.  
We recommend that you use Easy-CD Creator,  
which creates an ISO 9660 file system.  
• File names should have a maximum of 8 letters  
and must incorporate an .mp3 or .wma extension.  
• They should not contain special letters such as  
/ ? * : “ < > l etc.  
3. Press CLEAR. Repeat step 1~3 to erase addition-  
al tracks on the list.  
Erasing the Complete Program List  
1. During STOP mode, press PROGRAM and  
E
the  
mark will appear  
2. Use v V b B to select “Clear All”, then press  
ENTER/OK.  
Note:  
The programs are also cleared when the power is off  
or the disc is removed.  
• The total number of files in a folder should be  
less than 1190 files.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom  
Viewing a JPEG file  
Using this DVD+VCR you can view discs with JPEG  
files.  
Use zoom to enlarge the photo image. (see page 29)  
Note:  
When the resolution is set to 720p or 1080i,  
this function is not available.  
1. Insert a disc and close the tray. The PHOTO  
menu appears on the TV screen.  
To rotate picture  
Press v / V during showing a picture to rotate the  
picture clockwise or counter clockwise.  
To listen to MP3 music while watching  
picture  
1. Insert the disc containing the two types of file in  
the player.  
2. Press TITLE to display PHOTO menu.  
3. Press v / V to select a photo file.  
4. Use B to select  
icon then press ENTER.  
2. Press v / V to select a folder, and press  
ENTER/OK. A list of files in the folder appears.  
If you are in a file list and want to return to the  
previous Folder list, use the v / V buttons on the  
Playback starts. The playback will continue until  
STOP is pressed.  
Note:  
remote to highlight  
and press ENTER/OK.  
When the resolution is set to 720p or 1080i,  
this function is not available.  
3. If you want to view a particular file, press  
v / V to highlight a file and press ENTER/OK or  
PLAY (N). The selected file will appear for view-  
ing. While viewing a file, you can press STOP to  
move to the previous menu (PHOTO menu).  
Tip:  
To listen to only the desired music while watching pic-  
ture, program the desired tracks from the “MUSIC”  
menu and then proceed as above.  
Tips:  
Information and user guidance regarding the cur-  
rent image is displayed in the lower part of the  
screen. You can toggle this bar on and off using  
RETURN (O).  
JPEG disc compatibility with this player is  
limited as follows:  
There are three Slide Speed options  
>>> (Fast), >> (Normal) and > (Slow)  
Use v V b B to highlight the Speed. Then, use b  
/ B to select the option you want to use then  
press ENTER/OK.  
:
• Depending upon the size and number of JPEG  
files, it could take a long time for the DVD+VCR  
to read the disc’s contents. If you don’t see an  
on-screen display after several minutes, some of  
the files may be too large — reduce the resolution  
of the JPEG files to less than 5760 (Horizontal) x  
3840 (Vertical) pixels and burn another disc.  
Slide Show  
Use v V b B to highlight the  
press ENTER/OK.  
(Slide Show) then  
• The total number of files in a folder should be  
less than 1190 files.  
Still Picture  
• Some discs may be incompatible due to a differ-  
ent recording format or the condition of disc.  
1. Press PAUSE/STEP (X) during slide show.  
The player will now go into PAUSE mode.  
• Ensure that all the selected files have the “.jpg”  
extensions when copying into the CD layout.  
2. To return to the slide show, press PLAY (N) or  
press PAUSE/STEP (X) a gain.  
• If the files have “.jpe” or “.jpeg” extensions,  
please rename them as “.jpg” file.  
Moving to another File  
• File names without “.jpg” extension will not be  
able to be read by this DVD+VCR. Even though  
the files are shown as JPEG image files in  
Windows Explorer.  
Press SKIP (> or .) or cursor (b or B) once  
while viewing a picture to advance to the next or  
previous file.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DivX Movie file  
Using this DVD+VCR, you can play DivX file.  
DivX disc compatibility with this player is  
limited as follows:  
• Available resolution size of the DivX file is under  
720x576 (W x H) pixel.  
1. Insert a DivX file recorded media. The MOVIE  
menu appears on the TV screen.  
• The file name of the DivX subtitle is available by  
56 characters.  
• If there is impossible code to express in the DivX  
file, it may be displayed as “ _ ” mark on the dis-  
play.  
• If the number of the screen frame is over 30  
per 1 second, this unit may not operate nor-  
mally.  
• If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
2. Press v / V to select a folder, and press ENTER.  
A list of files in the folder appears.  
• If the file is recorded with GMC, the unit sup-  
ports only 1-point of the record level.  
3. If you want to view a particular file, press v / V to  
highlight a file and press ENTER/OK or PLAY.  
You can use variable playback functions. Refer to  
page 28-30.  
GMC?  
*
GMC is the acronym for Global Motion  
Compensation. It is an encoding tool specified in  
MPEG4 standard. Some MPEG4 encoders, like  
DivX or Xvid, have this option.  
There are different levels of GMC encoding, usu-  
ally called 1-point, 2-point, or 3-point GMC.  
4. Press STOP to stop the playback. The Movie  
menu appears  
Playable DivX file  
.avi, .mpg, .mpeg  
Tips:  
• If you are in a file list and want to return to the pre-  
vious Folder list, use the v / V buttons on the  
Playable Subtitle format  
remote to highlight  
and press ENTER/OK.  
SubRip(*.srt/*.txt)  
SAMI(*.smi)  
• Press DISC MENU to move to the next page.  
SubStation Alpha(*.ssa/*.txt)  
MicroDVD(*.sub/*.txt)  
SubViewer 1.0(*.sub)  
SubViewer 2.0(*.sub/*.txt) /  
TMPlayer(*.txt)  
• On a CD with MP3/WMA, JPEG and MOVIE file,  
you can switch MUSIC, PHOTO and MOVIE menu.  
Press TITLE and MUSIC, PHOTO and MOVIE word  
on top of the menu is highlighted.  
• The disc subtitle may not be displayed properly, if a  
DivX subtitle is downloaded through the internet.  
Playable Codec format  
“DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “XVID”,  
“MP43”, “3IVX”.  
• If the Disc Subtitle setup menu does not have the  
DivX subtitile language you are going to play, the  
subtitle may not be displayed properly.  
Playable Audio format  
“Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”.  
Sampling frequency: within 8 - 48 kHz (MP3),  
within 32 - 48kHz (WMA)  
Bit rate: within 8 - 320kbps (MP3),  
32 - 320kbps (WMA)  
Notice for displaying the DivX subtitle  
If the subtitle does not display properly during play-  
back, press and hold SUBTITLE about 3 seconds  
then press b / B to select another language code until  
the subtitle is displayed properly.  
Not all the WMA Audio format is compatible with  
this unit.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a DVD VR format  
Disc  
This unit will play DVD-R/RW discs recorded using  
the DVD-Video format that have been finalized using  
a DVD-recorder.  
Maintenance and Service  
Refer to the information in this chapter before con-  
tacting a service technician.  
Handling the Unit  
• This unit will play DVD-RW discs recorded using  
the Video Recording (VR) format.  
When shipping the unit  
Please save the original shipping carton and packing  
materials. If you need to ship the unit, for maximum  
protection, re-pack the unit as it was originally packed  
at the factory.  
1. Insert a disc and close the tray, It start playing  
automatically.  
2. The DVD-VR menu appears on the TV screen  
when you press DISC MENU buttons while play-  
ing.  
Keeping the exterior surfaces clean  
Do not use volatile liquids such as insecticide  
spray near the unit.  
Do not leave rubber or plastic products in contact  
with the unit for a long period of time. since they  
leave marks on the surface.  
Cleaning the unit  
To clean the player, use a soft, dry cloth. If the sur-  
faces are extremely dirty, use a soft cloth lightly mois-  
tened with a mild detergent solution.  
3. Press v / V to select a track then press PLAY or  
ENTER and playback starts.  
Do not use strong solvents such as alcohol, benzine,  
or thinner, as these might damage the surface of the  
unit.  
4. Press DISC MENU to move to the list menu.  
Notes:  
Maintaining the Unit  
• Unfinalized DVD-R/RW discs cannot be played in  
this player.  
The DVD+VCR is a high-tech, precision device. If the  
optical pick-up lens and disc drive parts are dirty or  
worn, the picture quality could be diminished.  
• Some DVD-VR disc are made with CPRM data by  
DVD RECORDER. Player does not support these  
kinds of discs.  
Depending on the operating environment, regular  
inspection and maintenance are recommended after  
every 1,000 hours of use.  
What is ‘CPRM’?  
CPRM is a copy protection system (with scramble  
system) only allowing the recording of ‘copy once’  
broadcast programs. CPRM stands for Content  
Protection for Recordable Media.  
For details, please contact your nearest authorized  
service center.  
This player is CPRM compatible, which means that  
you can record copy-once broadcast programs, but  
you cannot then make a copy of those recordings.  
CPRM recordings can only be made on DVD-RW  
discs formatted in VR mode, and CPRM recordings  
can only be played on players that are specifically  
compatible with CPRM.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reference  
Code numbers of controllable TVs  
Controlling Your TV with the  
Supplied Remote  
If more than one code number is listed, try entering  
them one at a time until you find the one that works  
with your TV.  
You can control the sound level, input source, and  
power switch of your LG TV with the supplied remote.  
Manufacturer  
ADMIRAL  
AIWA  
Code Number  
Manufacturer  
MONTGOMERY  
WARD  
Code Number  
01,06,08,09  
23,24,32,33,34  
01,08,56  
16,33,37,44,45  
70  
By pressing  
POWER  
INPUT  
You can  
AKAI  
01  
NEC  
Turn the TV on or off.  
Switch the TV’s input source.  
AMARK  
09  
NOBLEX  
07  
AOC  
01  
PACKARD BELL  
PANASONIC  
PHILCO  
43  
BELL & HOWELL  
BROKSONIC  
CANDLE  
33  
07,11,13,25,35,36  
01,06,07,08,09,  
15,38,43,58  
06,07,43,61,62,65  
30  
18,19  
CH +/–  
Scans up or down through  
memorized channels.  
51  
CCE  
07  
PHILIPS  
CENTURION  
CINERAL  
CITIZEN  
08  
PIONEER  
PORTLAND  
PROSCAN  
QUASAR  
RADIO SHACK  
RCA  
VOL +/–  
Adjust the volume of the TV.  
43  
09  
49,50,51,52,53,54,55  
03,37,44  
CORONADO  
CROWN  
09  
11,13  
Note:  
09  
16,17,23  
CURTIS MATHES  
DAEWOO  
DAYTRON  
EMERSON  
FISHER  
01,03,08,33,35,37,44  
16,38,39,40,41,42,43  
01,08  
01,03,37,44,69  
16,17,23  
Depending on the unit being connected, you may not  
be able to control your TV using some of the buttons.  
REALISTIC  
SAMPO  
08  
01,09,16,17,18,19  
28,29  
SAMSUNG  
SANYO  
01,08,09,25,68  
28,29  
Controlling other TVs with the remote  
FUNAI  
46,47  
SCOTT  
01,08  
GENERAL ELECTRIC 03,10,11,13,37,44  
SEARS  
09,25,26,27,28,29  
64  
You can control the sound level, input source, and  
power switch of non-LG TVs as well. If your TV is list-  
ed in the table below, set the appropriate manufactur-  
er code.  
GRADIENTE  
HITACHI  
JC PENNEY  
JVC  
01,56,57,63,67  
09,14,15,43  
01,08,10,27,35  
20,21,63,67  
43  
SEMP  
SHARP  
09,22,23,24,60,66  
01,06,08,09,10,  
23,24,33,34  
12,62,93  
SIGNATURE 2000  
KIOTE  
SONY  
KMC  
09  
SOUNDESIGN  
SYLVANIA  
51  
1. While holding down TV POWER button, press the  
number buttons to select the manufacturer code  
for your TV (see the table below).  
KTV  
01,08,09,31  
01,07,08,09,35,39,40  
33  
01,04,05,06,07,  
08,35,51  
LG (GOLDSTAR)  
LODGENET  
LOGIK  
SYMPHONIC  
TATUNG  
TEKNIKA  
TELERENT  
THOMSON  
YORX  
46,47  
33  
11  
2. Release TV POWER button.  
LXI  
09,24,25,26,27,28,29  
01,02,04,05,06,  
07,08,09,20,  
34,35,43,51,61,62,65  
33  
07,09,16,33,51  
09,33  
MAGNAVOX  
69  
08  
MAJESTIC  
TOSHIBA  
WARDS  
01,25,26,27,64  
01,06,08,09,10,33,34  
48  
MARANTZ  
01,32  
MEMOREX  
33  
XR1000  
MGA/MITSUBISHI  
01,08,32,34  
ZENITH  
01,02,33,59  
Notes:  
Depending on your TV, some or all buttons may not  
function on the TV, even after entering the correct  
manufacturer code.  
If you enter a new code number, the code number previ-  
ously entered will be erased.  
When you replace the batteries of the remote, the code  
number you have set may be reset to the default set-  
ting. Set the appropriate code number again.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language Codes List  
Use this list to input your desired language for the following initial settings:  
Disc Audio, Disc Subtitle, Disc Menu.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Code  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
Language  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Code  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
7589  
7579  
7585  
7679  
7665  
7686  
Language  
Lingala  
Lithuanian  
Macedonian  
Malagasy  
Malay  
Malayalam  
Maltese  
Maori  
Code  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7982  
8065  
8083  
7065  
8076  
8084  
8185  
Language  
Singhalese  
Slovak  
Slovenian  
Somali  
Spanish  
Sudanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Code  
8373  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Marathi  
Moldavian  
Mongolian  
Nauru  
Nepali  
Norwegian  
Oriya  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaeto-Romance 8277  
Rumanian  
Russian  
Samoan  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Shona  
Tamil  
Tatar  
Hebrew  
Hindi  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kirghiz  
8279  
8285  
8377  
8365  
7168  
8382  
8372  
8378  
8368  
Uzbek  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Sindhi  
Area Codes List  
Choose a area code from this list.  
Area  
Code  
AF  
AR  
AU  
AT  
Area  
Ethiopia  
Fiji  
Code  
ET  
FJ  
Area  
Code  
MY  
MV  
MX  
MC  
MN  
MA  
NP  
Area  
Saudi Arabia  
Senegal  
Singapore  
Slovak Republic  
Slovenia  
South Africa  
South Korea  
Spain  
Sri Lanka  
Sweden  
Switzerland  
Taiwan  
Thailand  
Turkey  
Code  
SA  
SN  
SG  
SK  
SI  
Afghanistan  
Argentina  
Australia  
Austria  
Belgium  
Bhutan  
Bolivia  
Brazil  
Cambodia  
Canada  
Chile  
China  
Colombia  
Congo  
Costa Rica  
Croatia  
Czech Republic  
Denmark  
Ecuador  
Egypt  
Malaysia  
Maldives  
Mexico  
Monaco  
Mongolia  
Morocco  
Nepal  
Netherlands  
Netherlands Antilles AN  
New Zealand  
Nigeria  
Norway  
Finland  
France  
Germany  
Great Britain  
Greece  
Greenland  
Islands  
Hong Kong  
Hungary  
India  
Indonesia  
Israel  
Italy  
Jamaica  
Japan  
Kenya  
FI  
FR  
DE  
GB  
GR  
GL  
HM  
HK  
HU  
IN  
ID  
IL  
IT  
JM  
JP  
BE  
BT  
ZA  
BO  
BR  
KH  
CA  
CL  
CN  
CO  
CG  
CR  
HR  
CZ  
DK  
EC  
EG  
SV  
KR  
ES  
LK  
NL  
NZ  
NG  
NO  
OM  
PK  
PA  
PY  
PH  
PL  
SE  
CH  
TW  
TH  
TR  
UG  
UA  
US  
UY  
UZ  
VN  
ZW  
Oman  
Pakistan  
Panama  
Paraguay  
Philippines  
Poland  
Portugal  
Romania  
Russian Federation RU  
Uganda  
Ukraine  
United States  
Uruguay  
Uzbekistan  
Vietnam  
KE  
KW  
LY  
Kuwait  
Libya  
Luxembourg  
PT  
RO  
El Salvador  
LU  
Zimbabwe  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service.  
Cause  
Correction  
Symptom  
No power.  
The power cord is disconnected.  
Plug the power cord into the wall out-  
let securely.  
Insert a disc or tape. (Check that the  
disc or tape indicator in the display  
window is lit.)  
Abnormal or no picture  
The TV is not set to receive DVD+VCR  
signal output.  
Select the appropriate video input  
mode on the TV so the picture from  
the DVD+VCR player appears on the  
TV screen.  
The video cable is not connected  
securely.  
Set HDMI on the front panel to OFF.  
The HDMI mode is on.  
Check TV capability.  
Unit output setting and TV resolution  
capabilites mismatch.  
Check mode of connections  
(eg. S-Video, Components etc.).  
Check unit Resolution setting accord-  
ing to TV capability and mode of con-  
nection.  
Wrong cable connection.  
Check the connection.  
Distorted or no sound.  
The equipment connected with the  
audio cable is not set to receive  
DVD+VCR signal outpt.  
Select the correct input mode of the  
audio receiver so you can listen to the  
sound from the DVD+VCR.  
The audio cables are not connected  
Connect the audio cable into the jacks  
securely.  
securely.  
The power of the equipment connected  
Turn on the equipment connected with  
with the audio cable is turned off.  
the audio cable.  
The AUDIO options are set to the wrong Set the AUDIO options to the correct  
position.  
position.  
In HDMI mode, audio selection is not  
Change AUDIO setup to PCM mode.  
set to PCM.  
The disc is dirty.  
The playback picture is  
poor.  
Clean thd disc.  
The TV channels are not tuned in  
Check tuning, carry out tuning again.  
properly.  
Tape heads are dirty.  
Clean video heads.  
Tape is a rental or was recorded on  
Use CH/TRK (+/-) for manual tracking  
another VCR.  
adjustment while tape is playing.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cause  
No disc is inserted.  
Correction  
Symptom  
Insert a disc or tape. (Check that the  
disc or tape indicator in the display  
window is lit.)  
The DVD+VCR does  
not start playback.  
No tape is inserted.  
Insert a playable disc. (Check the disc  
type and Regional code.)  
An unplayable disc is inserted.  
The disc is placed upside down.  
Place the disc with the playback side  
down.  
Place the disc on the disc tray correctly  
The disc is not placed within the  
inside the guide.  
guide.  
Clean the disc.  
The disc is dirty.  
Cancel the Rating function or change  
The Rating level is set.  
the Rating level.  
Eject the tape in.  
Is the cassette compartment empty?  
Video tape cannot be  
inserted.  
No Hi-Fi sound  
Select STEREO by repeatedly pressing  
Audio mode is not set properly.  
AUDIO on the remote control.  
There is an obstacle in the path of the  
Remove the obstacle.  
The remote control  
remote control and this unit.  
does not work properly.  
The batteries in the remote control are  
Replace the batteries with new ones.  
exhausted.  
The remote control is not pointed at  
Point the remote control at the remote  
the remote sensor of the DVD+VCR.  
sensor of the DVD+VCR.  
The remote control is too far from the  
Operate the remote control within 23ft  
DVD+VCR.  
(7m).  
This remote control use the same  
buttons for VCR and DVD functions  
(ex.PLAY).  
When using a VCR, first press the VCR  
button. When using a DVD, first press  
the DVD button.  
Turn camcorder on and operate  
properly.  
Camcorder image is  
not shown.  
Camcorder is off.  
Camcorder image via  
AV input to DVD+VCR  
is not shown on TV  
screen.  
Press INPUT to select LINE input  
channel (LINE1 or LINE2).  
DVD+VCR SOURCE SELECT is not  
set to LINE1 or LINE2.  
Timer recording is not  
possible.  
Set clock to correct time.  
Clock in DVD+VCR is not set to  
correct time.  
Timer has been programmed  
Reprogram Timer.  
incorrectly.  
Reprogram Timer and turn DVD+VCR  
off to enable timer.  
indicator light does not appear after  
programming timer.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements  
120V, 60 Hz  
Power consumption  
Dimensions (approx.)  
Weight (approx.)  
Operating temperature  
Operating humidity  
Signal system  
18 W  
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)  
9.26 lbs (4.2 kg)  
5˚C to 40˚C (41˚F to 104˚F)  
5 % to 90 %  
NTSC  
Inputs  
ANTENNA IN  
VHS VIDEO IN(LINE1, 2)  
VHS AUDIO IN(LINE1, 2)  
75 ohms (VHF/UHF/CATV)  
1 V (p-p) 75 ohms, sync negative, RCA jack x 2  
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2  
Outputs  
VIDEO OUT  
S-VIDEO OUT  
1 V (p-p) 75 ohms, sync negative  
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1  
(C) 0.286 V (p-p) 75 ohms  
COMPONENT VIDEO OUT  
(PROGRESSIVE SCAN)  
Audio output (digital audio)  
Audio output (analog audio)  
RF OUT  
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1  
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2  
0.5 V (p-p), 75 ohms, RCA jack x 1  
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1  
Channel 3 or 4 (Adjustable)  
VCR Specifications  
Head system  
Timer  
Tape speed  
Tape width  
Four head helical scan azimuth system  
12-hour display type with AM, PM  
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec  
12.7 mm  
Maximum recording time  
Rewind time  
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)  
About 3 minutes (T-120)  
Channel coverage  
Frequency range  
Signal-to-noise ratio  
Dynamic range  
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)  
20 Hz to 20 kHz  
More than 43 dB  
More than 88 dB  
Channel separation  
More than 60 dB  
DVD Specifications  
Laser system  
Frequency response  
Semiconductor laser, wavelength 650 nm  
DVD (PCM 96 kHz): 8 Hz to 44 kHz,  
DVD (PCM 48 kHz): 8 Hz to 22 kHz  
CD: 8 Hz to 20 kHz  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
More than 100 dB (ANALOG OUT jacks only)  
Less than 0.008%  
More than 95 dB (DVD/CD)  
Accessories:  
Video cable x 1, Audio cable (L/R) x 1, RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2  
Design and specifications are subject to change without prior notice.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LG  
DVD/VCR LIMITED WARRANTY - USA  
The manufacturer will repair or replace your product, at the manufacturer’s option, if it proves to be defective in  
material or workmanship under normal use, during the warranty period (“Warranty Period”) listed below, effective  
from the date (“Date of Installation”) of original consumer purchase of the product. This warranty is good only to the  
original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.  
WARRANTY PERIOD:  
HOW SERVICE IS HANDLED:  
This is an Exchange Product. Call 1-800-243-0000 for  
instructions on getting the defective unit replaced.  
LABOR: 90 DAYS from the Date of Purchase.  
PARTS: ONE YEAR from the Date of Purchase.  
Please retain dated sales receipt and your box to return  
the unit for replacement.  
Replacement Units is warranted for the remaining  
During the first 90 days of the Warranty Period, shipping  
charges both ways will be paid by the manufacturer. During  
the remainder of the Warranty Period (91-365 days), you  
pay in-bound shipping charges and the manufacturer pays  
return shipping charges.  
period of the original warranty.  
Visit our website at http://us.lgservice.com  
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT  
LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE  
EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS  
WARRANTY PERIOD ABOVE. LG WILL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, OR INCI-  
DENTAL DAMAGES OF ANY KIND, INCLUDING LOST REVENUES OR PROFITS, IN CONNECTION WITH THE  
PRODUCT. SOME STATES DO NOT ALLOW LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR  
THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR  
EXCLUSIONS MAY NOT APPLY TO YOU.  
THIS LIMITED WARRANTY DOES NOT APPLY TO:  
• Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,  
maintenance or failure to maintain, or separate system components; and  
• Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside envi-  
ronmental specifications or contrary to the requirements or precautions in the Operating Guide, accident, light-  
ning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or volt-  
age, signal reception or input, software not licensed directly by LG, software errors that do not disable function-  
ality, operating and software protocols adopted after the date of manufacture or for outside the US, institutional  
or commercial use, or other causes not arising out of defect in material or workmanship.  
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.  
CUSTOMER INTER-ACTIVE CENTER NUMBERS:  
Call 1-800-243-0000 (24 hours a day, 365 days per year) and select  
appropriate options from the menu.  
For Where to buy, Product Assistance, or  
Customer Assistance  
Or visit our website at http://us.lgservice.com  
FOR WARRANTY SERVICE:  
You must call 1-800-243-0000 (24 hours a day, 365 days per year) and select an appropriate option from the menu  
to confirm the product is defective and to obtain a Return Authorization (RA). If the defect has occurred during the  
first 90 days of the Warranty Period, you will be sent a return-shipping label. After you obtain an RA for return,  
please box your unit with a legible copy of the sales receipt and enough packing material to ensure undamaged  
delivery of your product. When you receive the label, place it on the box and call the 800# in the instructions for  
pick-up. When your unit is received, the manufacturer will replace your unit in accordance with this Limited Warranty.  
ADVANCE SHIPMENT. If a replacement unit is available and you want second day delivery, our service representa-  
tive will ask for your credit card number. A reserved deposit by credit card is required as surety for such advance  
shipment. Your credit card will not be charged if you return the defective unit in 10 business days. For advance ship-  
ment, the return label will come with the replacement unit sent to you. Please follow boxing and shipping instructions  
above.  
LG ELECTRONICS U.S.A., INC.  
1000 SYLVAN AVENUE  
ENGLEWOOD CLIFFS, NJ  
GS# 3835RV00???  
Printed in Indonesia  
lssue O  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Indoor Furnishings 10501144 User Manual
Lenmar Enterprises Battery Charger BCR06 User Manual
Life Fitness Treadmill 95T XXXXX 02 User Manual
Life Fitness Treadmill FT6 User Manual
Makita Cordless Drill DF010D User Manual
MaxTech Oxygen Equipment OM 25ME User Manual
Maytag Cooktop JGD8130ADS User Manual
Maytag Indoor Fireplace MPE 33R User Manual
Memorex MP3 Player MP8800 User Manual
MicroBoards Technology DVD Recorder Premium Series