LH-EC950SB NA1ULLS
5 Disc DVD COMBI
HOME THEATER SYSTEM
OWNER’S MANUAL
MODEL: LHX-557
R
Before connecting up, operating or repairing this product,
please read this instruction booklet carefully and
completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS MANUAL FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock
or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for
installation, use, and servicing.
This unit does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
prong are
provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this apparatus near water. – For
example: near a bath tub, wash bowl, kitchen sink,
laundry tub, in a wet basement; or near a swimming
pool; and like.
11. Only use attachments/accessories specified by
the manufacturer.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use
liquid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
The openings should never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
13. Unplug this apparatus during lightning storms
or when unused for long periods of time.
manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
DVD Operation Setup . . . . . . . . . . . . . . . .24-28
ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .24
• Playback Status/Restrictions . . . . . . . . . . . . .24
INITIAL SETTINGS . . . . . . . . . . . . . . . . . . . . . .25
GENERAL OPERATION . . . . . . . . . . . . . . . . . . .25
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
• Menu Language . . . . . . . . . . . . . . . . . . . . . .25
• Disc Audio / Subtitle / Menu . . . . . . . . . . . . .25
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . . . . .25
• Display Mode . . . . . . . . . . . . . . . . . . . . . . . .25
• Progressive Scan . . . . . . . . . . . . . . . . . . . . . .25
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
• 5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .26
• Dynamic Range Control (DRC) . . . . . . . . . .26
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
LOCK (Parental Control) . . . . . . . . . . . . . . . . . .27
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
• Password (Security Code) . . . . . . . . . . . . . . .27
• Country Code . . . . . . . . . . . . . . . . . . . . . . . .27
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . . . . .28
• B.L.E. (Black Level Expansion) . . . . . . . . . . .28
Introduction . . . . . . . . . . . . . . . . . . . .3-12
IMPORTANT SAFETY INSTRUCTIONS . . . . . .3
Symbol used in this Manual . . . . . . . . . . . . . . .6
About the
Symbol Display . . . . . . . . . . . . .6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . .6
HANDLING DISCS . . . . . . . . . . . . . . . . . . . . . . .6
STORING DISCS . . . . . . . . . . . . . . . . . . . . . . . . .6
CLEANING DISCS . . . . . . . . . . . . . . . . . . . . . . . .6
Types of Playable Discs . . . . . . . . . . . . . . . . . .7
Regional code . . . . . . . . . . . . . . . . . . . . . . . . .7
Disc-related terms . . . . . . . . . . . . . . . . . . . . . .8
REMOTE CONTROL OPERATION RANGE . . . . .8
REMOTE CONTROL BATTERY INSTALLATION .8
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Display Window . . . . . . . . . . . . . . . . . . . . . . . .10
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .11
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .12
System Setup . . . . . . . . . . . . . . . . .13-28
Connections . . . . . . . . . . . . . . . . . . . . . . .13-18
CONNECTING ANTENNA/CABLE TV TO COMBI
RECEIVER . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
• Cable Service Without Cable Box . . . . . . . . .13
• Cable Service With Cable Box . . . . . . . . . . .13
CONNECTING TO A TV . . . . . . . . . . . . . . . . . . . .14
• RF coaxial connection . . . . . . . . . . . . . . . . . .14
• Audio/Video connection . . . . . . . . . . . . . . . . .14
• S-Video connection . . . . . . . . . . . . . . . . . . . .14
• Component Video (ColorStream) connection .14
• Progressive Scan (ColorStream pro)
Operation . . . . . . . . . . . . . . . . . . . . .29-49
VCR Operation . . . . . . . . . . . . . . . . . . . . .29-34
TRACKING CONTROL
TRACKING CONTROL
. . . . . . . . . . . . . . . . . .29
. . . . . . . . . . . . . . . . . .29
• Auto Tracking . . . . . . . . . . . . . . . . . . . . . . . .29
• Manual Tracking . . . . . . . . . . . . . . . . . . . . . .29
Special Effects Playbacks . . . . . . . . . . . . . . . .29
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
STILL P[LAYBACK AND FRAME-BY-FRAME
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
SLOW MOTION . . . . . . . . . . . . . . . . . . . . . . . . .29
CM SKIP (COMMERCIAL SKIP) . . . . . . . . . . . . . . .29
Normal Recording . . . . . . . . . . . . . . . . . . . . . .30
PAUSING THE RECORDING . . . . . . . . . . . . . . .30
TO RECORD ONE TV PROGRAMME WHILE
connection . . . . . . . . . . . . . . . . . . . . . . . . . .14
ANTENNA CONNECTIONS . . . . . . . . . . . . . . . . .15
ACCESSORY AUDIO/VIDEO (A/V)
CONNECTIONS TO COMBI RECEIVER . . . . . . .16
HDMI CONNECTION . . . . . . . . . . . . . . . . . . . . .17
• About HDMI . . . . . . . . . . . . . . . . . . . . . . . . .17
SPEAKER SYSTEM CONNECTION . . . . . . . . . .18
Speaker Positioning . . . . . . . . . . . . . . . . . . . . .19
Mini Glossary . . . . . . . . . . . . . . . . . . . . . . . . .20
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . .20
WATCHING ANOTHER . . . . . . . . . . . . . . . . . . .30
Timer Recording . . . . . . . . . . . . . . . . . . . .30-31
CHECKING (ERASING) TIMER RECORD
VCR Operation Setup . . . . . . . . . . . . . . . . .21-23
ON-SCREEN DISPLAY (OSD) . . . . . . . . . . . . . . .21
• Easy Information . . . . . . . . . . . . . . . . . . . . . .21
ON-SCREEN MENUS SETUP . . . . . . . . . . . . . . .21
• Menu Selection . . . . . . . . . . . . . . . . . . . . . . .21
VCR SETUP MENU OPTIONS . . . . . . . . . . . . . .22
CHANNEL SELECTION . . . . . . . . . . . . . . . . . . . .22
• Auto Channel Programming . . . . . . . . . . . . .22
• To Add or Erase Channels from Memory . . . .22
SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . .23
• Auto Clock Set . . . . . . . . . . . . . . . . . . . . . . .23
• Manual Clock Set . . . . . . . . . . . . . . . . . . . . .23
PROGRAMMING . . . . . . . . . . . . . . . . . . . . . . . . .31
PROGRAM PRIORITY . . . . . . . . . . . . . . . . . . .31
Instant Timer Recording . . . . . . . . . . . . . . . . .32
CHECKING THE RECORDING TIME . . . . . . . .32
TO EXTEND THE RECORDING TIME . . . . . . . .32
Dubbing and Editing . . . . . . . . . . . . . . . . . . . .32
Copying from DVD to VCR . . . . . . . . . . . . . . .32
VHS Hi-Fi Stereo System/MTS Boadcast . . . . .33
MTS (MULTICHANNEL TV SOUND) . . . . . . . . . .33
MULTICHANNEL TV SOUND INDICATOR . . . . .33
SAP (SECOND AUDIO SOUND PROGRAM)
Tape Counter Memory Feature . . . . . . . . . . . .34
REAL-TIME COUNTER . . . . . . . . . . . . . . . . . . .34
COUNTER MEMORY FEATURE . . . . . . . . . . . .34
TAPE REMAINING . . . . . . . . . . . . . . . . . . . . . . .34
Additional Information . . . . . . . . . . . . . . . . . .34
Auto Play System . . . . . . . . . . . . . . . . . . . . .34
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . . .43
SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . .43
STILL PICTURE . . . . . . . . . . . . . . . . . . . . . . . . .43
MOVING TO ANOTHER FILE . . . . . . . . . . . . . .43
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
TO ROTATE PICTURE . . . . . . . . . . . . . . . . . . . .43
TO LISTEN TO MP3/WMA MUSIC
WATCHING PICTURE . . . . . . . . . . . . . . . . . . . .43
Playing a DVD VR format Disc . . . . . . . . . . . .44
Maintenance and Service . . . . . . . . . . . . . . . .44
HANDLING THE UNIT . . . . . . . . . . . . . . . . . . . .44
Playing a DivX Movie Disc . . . . . . . . . . . . . . .45
5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .46
SPEAKER SETUP . . . . . . . . . . . . . . . . . . . . . . .46
Additional Features . . . . . . . . . . . . . . . . . . . . .47
SCREEN SAVER . . . . . . . . . . . . . . . . . . . . . . . .47
VIDEO MODE SETTING . . . . . . . . . . . . . . . . . . .47
XTS (EXCELLENT TRUE SOUND) . . . . . . . . . . .47
DVD Operation . . . . . . . . . . . . . . . . . . . . .48-49
PRESETTING THE RADIO STATIONS . . . . . . .48
LISTENING TO THE RADIO . . . . . . . . . . . . . . .48
TO CLEAR THE STORED RADIO STATIONS . .48
TUNING STATIONS MANUALLY . . . . . . . . . . . .49
FOR YOUR REFERENCE . . . . . . . . . . . . . . . . .49
TUNING STATIONS AUTOMATICALLY . . . . . . . .49
LABELING STATIONS . . . . . . . . . . . . . . . . . . . .49
Operation (Continued) . . . . . . . . . .29-49
DVD Operation . . . . . . . . . . . . . . . . . . . . .35-49
PLAYING A DVD . . . . . . . . . . . . . . . . . . . . . . . .35
• To Insert Discs . . . . . . . . . . . . . . . . . . . . . . . .35
• To Open All Discs . . . . . . . . . . . . . . . . . . . . . .35
• To Select a Playback Discs . . . . . . . . . . . . . .35
• To Replace Discs During Playback . . . . . . . . .35
• To Play All Discs on the Disc Trays . . . . . . . . .35
General Features . . . . . . . . . . . . . . . . . . . . . .36
MOVING TO ANOTHER TITLE/GROUP . . . . . . .36
MOVING TO ANOTHER CHAPTER/TRACK . . . .36
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
STILL PICTURE AND FRAME-BY-FRAME
PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
SLOW SCAN . . . . . . . . . . . . . . . . . . . . . . . . . . .36
REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . .36
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
3D SURROUND
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .37
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
MARKER SEARCH . . . . . . . . . . . . . . . . . . . .37
. . . . . . . . . . . . . . . . . . . . . . .37
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Special DVD Features . . . . . . . . . . . . . . . . . .38
CHECKING THE CONTENTS OF DVD
DISCS: MENUS . . . . . . . . . . . . . . . . . . . . . . . . .38
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . .38
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . .38
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . .38
CHANGING THE AUDIO LANGUAGE . . . . . . . . .38
SUBTITLES . . . . . . . . . . . . . . . . . . . . . . . . . . .38
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . . .39
MOVING TO ANOTHER GROUP . . . . . . . . . . . .39
VIEWING ANOTHER PAGE . . . . . . . . . . . . . . . .39
Playing an Audio CD or MP3/WMA Disc . . . . .40
AUDIO CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
MP3/WMA . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Audio CD and MP3 / WMA Disc Features . . . .41
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
MOVING TO ANOTHER TRACK . . . . . . . . . . . .41
REPEAT TRACK/ALL/OFF . . . . . . . . . . . . . . . . .41
SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
REPEAT A-B . . . . . . . . . . . . . . . . . . . . . . . . . . .41
3D SURROUND . . . . . . . . . . . . . . . . . . . . . . . . .41
Programmed Playback . . . . . . . . . . . . . . . . .42
REPEAT PROGRAMMED TRACKS . . . . . . . . .42
ERASING A TRACK FROM PROGRAM LIST . . .42
ERASING THE COMPLETE PROGRAM LIST . .42
Reference . . . . . . . . . . . . . . . . . . . .50-55
Controlling your TV with the Suppllied
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Controlling other TVs with the Suppllied
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Code Numbers of Controllable TVs . . . . . . . . .50
Language Codes . . . . . . . . . . . . . . . . . . . . . . .51
Country Codes . . . . . . . . . . . . . . . . . . . . . . . .51
Troubleshooting . . . . . . . . . . . . . . . . . . . . .52-53
Specifications . . . . . . . . . . . . . . . . . . . . . . .54-55
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About the Symbol Display
To ensure proper use of this product, please read this
Owner’s Manual carefully and retain for future
reference.
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc, or at the momment.
This manual provides information on the operation
and maintenance of your Combi Home Theater
System. Should the unit require service, contact an
Authorized Service Center.
Notes on Discs
Symbols Used in this Manual
HANDLING DISCS
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
STORING DISCS
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates special notes and operating features.
CLEANING DISCS
Tip:
Indicates tips and hints for making the task easier.
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
CD
Audio CDs
MP3
MP3 Discs
WMA
JPEG
DivX
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
WMA Discs
JPEG Discs
DivX Discs
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
DVD
(8 cm / 12 cm disc)
DVD audio discs
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit plays DivX files, DVD -R, DVD +R,
DVD -RW, DVD +RW, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
Regional code
This Home Theater System is designed
and manufactured for playback of region
“1” encoded DVD software. This unit can
play only DVD discs labeled “1” or “ALL”.
1
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Notes on Regional Codes
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your Home Theater System’s
regional code or the disc cannot play.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• If you try to play a DVD with a different region code
from your receiver, the message “Check Regional
Code” appears on the TV screen.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
Notes on DVDs
Some playback operations of DVDs may be
intentionally programmed by software manufacturers.
This unit plays DVDs according to disc content
designed by the software manufacturer, therefore
some playback features may not be available or other
functions may be added.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No’s. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
world-wide patents issued and pending. “DTS” and
“DTS Digital Surround” are registered trademarks of
Digital Theater Systems, Inc. Copyright 1996, 2003
Digital Theater Systems, Inc. All rights reserved.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc-related terms
Title (DVD video discs only)
DVD ±R / DVD ±RW
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38 Gigabytes and double-sided discs hold twice as
much. There are no dual layer single sided recordable
discs.
Chapter (DVD video discs only)
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MPEG
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Group (DVD audio discs only)
The main audio content or accompanying feature
content or additional feature content, or music
album.Each group is assigned a group reference
number enabling you to locate it easily.
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
Track
A distinct element of audio/visual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colors.
DivX
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this Combi Receiver.
Remote Control Operation Range
Point the Remote Control at the remote sensor and
press the buttons.
ꢀ Distance: About 23 ft (7 m) from the front of the
remote sensor.
ꢀ Angle: About 30° in each direction of the front of
the remote sensor.
Remote Control Battery Installation
Detach the battery cover on the
rear of the Remote Control, and
insert two AAA batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Cassette Compartment (VCR deck)
POWER button and indicator
Switches the Home Theater System ON and
OFF.
Lights blue when the Home Theater System
is turned off.
Insert a video cassette here.
Display window
Shows the current status of the Unit.
VOLUME Control
Turn the knob clockwise to increase
Drawer (DVD deck)
Insert discs here.
sound level, counterclockwise to
decrease sound level.
Z EJECT ALL
Press to open
all disc trays.
Z EJECT
Ejects the tape in the VCR deck.
DVD/VCR
Toggles control between the DVD
deck and the VCR deck.
You can also select the desired
function (DVD, VCR or FM/AM).
z (REC) button
Starts recording.
Press repeatedly to set the recording
time.
B (PLAY)
To play back a disc or tape.
PAUSE/STEP(X/C)
Pause playback of a tape or a
disc in the DVD or VCR deck
temporarily/press repeatedly for
frame-by-frame playback.
Remote Sensor
Point the Unit.
Remote Control here.
x (STOP)
Stops playback.
Reverse SKIP/SCAN (
/ )
S Q
DVD: Goes to the beginning of current
chapter/track or to the previous chapter/track.
Press and hold for two seconds for a fast reverse
search.
VCR: Rewinds the tape from the STOP mode or
for fast reverse picture search.
Z OPEN SEL/CLOSE
Opens or closes the disc tray.
Disc buttons (DISC 1 - DISC 5)
Press to select the disc directly.
L 2 (VIDEO / AUDIO (Left/Right))
Connect the audio/video output of an external source (Audio
system, TV/ Monitor, VCR, Camcorder, etc.).
Forward SKIP/SCAN (
/ )
R T
DVD: Goes to NEXT chapter/track.
Press and hold for two seconds for a fast forward search.
VCR: Advances the tape from the STOP mode or for fast forward picture search.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Window
A disc is loaded in the DVD deck. (Lights when a disc is
loaded in the DVD deck and flashes when the disc tray
is opened.)
Indicates current
audio stream.
Home Theater System is in VCR timer recording
mode or a VCR timer recording is programmed.
Indicates the unit is in the radio
recording mode.
DVD to VCR copy is in progress.
Home Theater System is
Recording a tape.
Indicates the current
surround mode.
Indicates the unit is
playing back a tape
recorded in Hi-Fi.
Lights up when an SAP
BILINGUAL broadcast
is being received.
MUTE indicator
Programmed
playback active.
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
ST
CHPTRK
II
PROG
TITLE
PROLOGIC
COPY
REC
Hi-Fi
MUTE
RADIO DVD SAP
VCR MP3 TV
RPT ALL
A
B
Total playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Indicates current chapter,
track number or channel
number.
Indicates the unit is in the TV mode.
MP3 disc inserted.
Repeat playback mode indicators.
Indicates the unit is in the TV mode.
DVD disc inserted.
WMA disc inserted.
Lights up when a stereo broadcast
is being received.
JPEG file disc inserted
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
POWER
Turns Home Theater System ON and
OFF.
EJECT ALL, OPEN/CLOSE
- Opens and closes all disc tray.
- Ejects the tape in the VCR deck.
EJECT ALL
DVD
Select the Home Theater System’s
function mode to DVD.
AUX
Selects external input source.
VCR
AUX
DISC SEL.
To select desired a disc.
INPUT
Selects the VCR deck’s source
(Tuner, L 1, or L 2).
VCR
Select the Home Theater System’s
function mode to VCR.
DISC SEL.
INPUT
FM/AM Tuner select
Select FM or AM band as the listening
choice. (FM and AM bands).
0-9 numerical buttons
Selects numbered options in a menu.
PROGRAM
Disc buttons (1-5)
XTS
To enjoy great sound effect.
PROGRAM
AUDIO
Accesses or removes Program menu.
CLEAR
HDMI
RESOLUTION
HDMI
Switches the HDMI mode to OFF.
Removes a track number on the
program menu or a mark on the
MARKER SEARCH menu.
Clears preset stations from the tuner
memory.
RESOLUTION
Changes the resolution depending
on your TV.
CLK/CNT
SOUND MODE
Selects sound mode.
AUDIO
Selects an audio language (DVD) or
an audio channel (CD).
SETUP/MEMU
Accesses or removes DVD Setup
menu and VCR menu.
DISC MENU
MEMORY
/ENTER
DISPLAY, CLK/CNT
Accesses On-Screen display.
Switches between the clock, tape counter
and tape remaining modes on the display.
DISC MENU
TRK/PRESET(-/+)(v/V): Selects VCR
or Tuner channels Manually or adjust the
tape’s picture onscreen.
TRK/PRESET -
REC/ITR
BACKWARD
FORWARD
RETURN (O)
Removes the menu.
MEMORY/ENTER
Accesses menu on a DVD disc.
PAUSE/STEP
VOLUME (+/-)
- Acknowledges menu selection.
- Displays functions on the TV screen
-Stores a radio station’s frequency in the
tuner’s memory.
Adjusts speaker sound.
MARKER
Marks any point during playback.
TUNING
MARKER - SEARCH SUB TITLE
ANGLE
REPEAT
TITLE
SEARCH
Displays Marker Search menu.
REC/ITR (z)
Records normally or activates Instant
Timer Recording.
CM SKIP
SPEED
ZOOM
SUBTITLE
Selects a subtitle language.
MUTE
BACKWARD (.)
FORWARD (>)
Turns the sound on and off
temporarily.
TV/VCR
Switch to view channels selected by
the VCR tuner or by the TV tuner.
ZOOM
STOP (x)
Stops playback.
PAUSE/STEP (X)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Enlarges DVD video image.
TV Control Buttons
- POWER: Switches TV ON and
OFF.
PLAY (B)
Starts playback.
ANGLE
Selects a DVD camera angles if
available.
REPEAT A-B
- CHANNEL v/V: Selects TV’s
channel.
- VOLUME +/–: Adjusts TV’s volume.
- TV INPUT: Selects the TV’s source.
- MUTE: Turns on or off TV sound.
Repeats sequence between two points
(A and B)
REPEAT
Repeat chapter, track, title or all.
RESOLUTION
- HDMI mode: You can switch among the 480p, 720p or 1080i
resolution.
- Component mode: You can switch among the 480i, 480p, 720p
or 1080i resolution.
CM SKIP
Fast forwards picture search through 30
seconds of recording.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
AM ANTENNA CONNECTORS
Connect the AM antenna to
this terminal.
AC Power Cord
Plug into the power source.
FM ANTENNA CONNECTORS
Connect the FM antenna to this terminal.
SPEAKER CONNECTORS
Connect the six supplied speakers
to these terminals.
Cooling fan
HDMI OUT
HDMI output providing a high quality
interface for digital audio and video.
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT (Pr Pb Y)
Connect to a TV with Pr Pb Y inputs.
DVD/VCR OUT VIDEO OUT/AUDIO OUT
(Left/Right))
Connect to a TV with video and audio inputs.
VCR IN LINE 1 (VIDEO IN/AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, another VCR).
OPTICAL IN Connector
Connect an optical output of Digital Device.
S-VIDEO OUT (DVD OUT)
Connect to an S-Video Input on TV.
FOR DVD VIEWING ONLY.
DVD/VCR OUT RF.OUT
Connect to a TV with RF coaxial inputs.
ANTENNA IN
Connect the VHF/UHF/CATV antenna
to this terminal.
Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Tips:
Cable Service Without Cable Box
If your cable wire is connected to your TV without a
converter or descrambler box, unscrew the wire from your
TV and attach it to the ANT.IN jack on the Combi Receiver.
Use the supplied round coaxial cable to connect between the
Combi Receiver’s RF.OUT jack and the 75 ohm antenna
input jack on the TV. With this connection, you can receive
all midband, super band, and hyperband channels. (All cable
channels.)
• Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the Home Theater System. Use only one of
the connections described below.
• Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
make the best connections.
Caution:
Cable Service With Cable Box
If a converter is required in your cable system, follow the
instruction below:
The cable hookup permits both TV and Combi Receiver
operation.
• Make sure the Home Theater System is connected
directly to the TV. Tune the TV to the correct video
input channel.
• Do not connect the Home Theater System’s AUDIO
OUT jack to the phono in jack (record deck) of your
audio system.
To view or record a CATV channel
1. Tune the TV to the correct video input channel.
2. Set the Home Theater System channel selector to the
output channel of the Cable Converter box using
TRK/PRESET(-/+) (v / V) or number (0-9) of your Combi
Receiver. (Example: CH3)
• Do not connect your Home Theater Systemr via
your VCR. The DVD image could be distorted by
the copy protection system.
Connecting Antenna/Cable TV to
Home Theater System
3. Select the channel to view at the Cable Converter Box.
Note:
1. Disconnect the antenna leads from the rear of the
TV.
If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set as indicated on page 22.
2. Identify the type of cable from your antenna. If it is
a round cable as illustrated, it is a 75 ohm coaxial
antenna cable. This cable will connect directly to
the jack marked ANT.IN on your Recorder Combi
Receiver.
Cable TV
Wall Jack
Back Panel of
Typical Cable Box
Tips:
If your antenna lead wire is a flat type antenna cable,
connect it to an Antenna Adapter (300-ohm to 75-
ohm) (not supplied) and slip the Adapter onto the jack.
The Adapter does not screw on to the Recorder
Combi Receiver, it just slips over the jack.
Rear of Home Theater System
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
RF COAXIAL CONNECTION
Connect the RF.OUT jack on the Home Theater System to the antenna in jack on the TV using the 75-ohm
Coaxial Cable supplied (R).
Note:
If you use this connection, tune the TV to the Home Theater System’s RF output channel (CH 3 or 4).
How to set the Home Theater System’s RF output channel
When the Home Theater System is turned off, press and hold TRK/PRESET(-/+) (v or V) on the remote control
for about five seconds to change the RF output channel (CH 03 or CH 04). “RF-03” or “RF-04” appears in the
display window.
Rear of TV
ANTENNA
INPUT
S-VIDEO
INPUT
VIDEO
INPUT
COMPONENT/PROGRESSIVE VIDEO INPUT
AUDIO INPUT
Y
Pr
Pb
R
L
R
S
V
C
A
Rear of Home Theater System
PROGRESSIVE SCAN (ColorStream® pro)
CONNECTION
AUDIO/VIDEO CONNECTION
1. Connect the VIDEO OUT jack on the Home
Theater System to the video in jack on the TV
ꢀ
If your television is a high-definition or “digital
ready” television, you may take advantage of the
Combi Receiver’s progressive scan output for the
highest video resolution possible.
using the video cable (V).
2. Connect the Left and Right AUDIO OUT jacks from
the Home Theater System to the audio left/right in
jacks from the TV using the audio cables (A).
ꢀ
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the Home Theater System.
S-VIDEO CONNECTION
Connect the S-VIDEO OUT jack on the Home Theater
System to the S-Video in jack on the TV using the
S-Video cable (S).
Notes:
• You can change the resolution (480i, 480p, 720p,
1080i) for the component/progressive scan video
output by pressing RESOLUTION on the remote
control.
• For 720p and 1080i resolution, only non-copy
protected discs can be played back. If the disc is
copy protected, it will be displayed at the 480p
resolution.
Notes:
• For VIDEO OUT and S-VIDEO OUT jack
connection, resolution must be set to 480i or 480p
by pressing RESOLUTION on the remote control,
however VIDEO OUT and S-VIDEO OUT is always
at 480i standard resolution.
• HDMI mode must be set to OFF for VIDEO OUT
and S-VIDEO OUT jack connection.
• HDMI mode must be set to OFF for Component
video connections.
• Progressive scan does not work with the analog
video connections (VIDEO OUT & S-VIDEO).
COMPONENT VIDEO (Color Stream®)
CONNECTION
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the Home Theater System to
the corresponding in jacks on the TV using an Y Pb Pr
cable (C).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
Connect the supplied FM/AM antenna for listening to the radio.
ꢀ
Connect the AM Loop antenna to the AM antenna connector.
Connect he FM Wire antenna to the FM antenna connector.
ꢀ
Notes:
• To prevent noise pickup, keep the AM Loop antenna away from the Combi Receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM Wire antenna, keep it as horizontal as possible.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Audio/Video (A/V) Connections to Home Theater System
Connect the VCR IN LINE 1 or VIDEO/AUDIO(L/R) jacks on the Home Theater System to the AUDIO/VIDEO OUT
jacks on your accessory component, using the optional audio/video cables.
If the auxiliary devices (e.g. DVD) are equipped with OPTICAL OUT jack, connect them to the OPTICAL IN jack of
the Home Theater System.
Home Theater System
Home Theater System
Note:
If you use the S-VIDEO IN jack on the front panel, the VIDEO jack on the front panel is not available.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI Connection
If you have a HDMI TV or monitor, you can connect it
to this Home Theater System using a HDMI cable.
HDMI compatible TV
HDMI
1. Connect the HDMI OUT jack on the Home Theater
System to the HDMI jack on a HDMI compatible
TV or monitor (H).
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Rear of Home Theater System
3. In stop mode, select HDMI mode by pressing
HDMI on the remote control.
Press RESOLUTION repeatedly to select the
resolution you wish to change to then press PLAY.
The DVD disc must not be playing in order to set
the resolution.
Notes:
ABOUT HDMI
• No sound will be output from HDMI cable if the
AUDIO setup is not set to PCM.
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
Home Theater System.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
DTVs.
• When you use HDMI, the other connections (Yellow
VIDEO OUT, S-Video and Component Video (Pr Pb
Y) will not work.
• If there is noise or lines on the screen, please
check the HDMI cable.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
Tip :
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i) for the HDMI output by
pressing RESOLUTION on the remote control.
480i is not available. You can only change the
resolution within your TV’s and Monitor’s resolution
capabilities.
- For S-VIDEO OUT connection, black and white
scramble signal will appear if you select an
incompatible resolution.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker System Connection
Connect the speakers using the supplied speaker cables.
To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.).
Notes:
ꢀ
Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack bass.
If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
ꢀ
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Positioning
In the case of normal position use the 6 speakers (2 front speakers, 1 center speaker, 2 rear speakers and
subwoofer).
If you want to play the excellent bass sound, DTS digital surround or Dolby Digital surround, you should connect
a subwoofer.
• Front speakers
According to your listening position set up the speakers for equal distance. And by hearing position set up the
interval between speakers to 45 degree.
• Center speaker
The center speakers and front speakers are ideally the same height, and placed above or below the
television.
• Rear speakers
Place left and right behind the listening area. These speakers recreate sound motion and atmosphere
required for surround sound playback. For best results, do not install the rear speakers too far behind the
listening position and install them at or above the level of the listener’s ears. It is also effective to direct the
rear speakers towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 - 90 cm than the listener’s ears.
• Subwoofer
This can be placed in any front position.
Subwoofer
Center Speaker
Front Speaker
(Left)
Front Speaker
(Right)
Rear Speaker
(Left)
Rear Speaker
(Right)
Speaker Positioning Example
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Mini Glossary
Sound Mode
You can enjoy surround sound simply by selecting
one of the pre-programmed sound fields according to
the
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc. bearing the trademark.
DTS Digital Surround delivers up to 6 channels of
transparent audio and results in exceptional clarity
throughout a true 360 degree sound field. The term DTS is a
trademark of DTS Technology, LLC. Manufactured under
license from DTS Technology, LLC.
program you want to listen to.
Each time you press the SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC → PLII MOVIE → PLII MUSIC →
PLII MATRIX → ROCK → POP → LIVE → DANCE →
TECHNO → CLASSIC → SOFT → 3D SURROUND →
BYPASS ...
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
(This function available 2-channel mode only)
program source. If you play DVDs with “
” mark, you can
For DVD Operation
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
You can change the sound mode of DVD (Dolby Digital,
DTS, PRO LOGIC, etc.) by pressing the AUDIO button
repeatedly on the remote during playback.
Although DVD contents differ from disc to disc, the following
explains the basic operation when this feature is used.
Use this mode when playing movie or Dolby Digital 2 channel
Each time you press AUDIO, the Combi Receiver sound
mode is changed in the following order;
which carries the “
” mark. This mode provides the
effect of being in a movie theatre or live concert house-an
effect with an intensity which can only be obtained through
DOLBY PRO LOGIC SURROUND. The effect of the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much
clearer and more dynamic than before.
→
→
→
For your reference
•
The Home Theater System memorizes the last
(II)
mode setting for each source individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Pro Logic II creates five full-bandwidth output channels
from two-channel sources. This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds or tonal colorations.
•
- Dolby Digital discs are labeled with the
- Dolby Surround encoded programs are labeled
with the logo.
- DTS Digital Surround discs are marked with DTS.
logo.
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
Note:
ꢀ
When you play sound tracks with 96kHz sampling
MUSIC mode:
The Music mode is for use with any stereo music recordings.
frequency, the output signals will be converted to 48kHz
(sampling frequency).
MATRIX mode:
The Matrix mode is the same as the Music mode except that
the directional enhancement logic is turned off. It may be used
to enhance mono signals by making them seem “larger.” The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause disturbing surround signals from a logic decoder. The
ultimate “cure” for poor FM stereo reception may be simply to
force the audio to mono.
3D SURROUND
This unit can produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to
listen to multi-channel audio from a home theatre. This
feature works with DVD discs encoded with Dolby Pro Logic
and Dolby Digital audio tracks.
BYPASS
Software with multichannel surround audio signals is played
according to the way it was recorded.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation Seup
EASY INFORMATION
On-Screen Display (OSD)
Some of these functions appear during VCR
operation.
If the Extended Data Service (XDS) signals are
provided along with normal TV signal in your area or
during playback of a tape recorded with Extended
Data Service (XDS) signals, the station ID, program
title, and program details are shown on the TV screen.
When viewing a channel with Extended Data Service
(XDS) signals, press MEMORY/ENTER and the station ID
will appear on the TV screen. Press MEMORY/ENTER
again and the program details will appear on the TV
screen.
❶
❷
❸
❹
❺
PLAY
SP
HI-FI
CH 4
STEREO
When viewing a tape recorded with Extended Data
Service (XDS) signals, press MEMORY/ENTER twice
and the program title and program details will appear
on the TV screen.
FEB 2 , WED
2:15 PM
❻
❼
PROGRAM DETAILS
❶ TAPE SPEED DISPLAY
Shows the current tape speed.
❷ FUNCTION DISPLAY
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of a
program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated). The
rating N/A means that the motion picture ratings are
not
Indicates the function in progress.
❸ HI-FI DISPLAY
Indicates the unit is playing back tape recorded in Hi-Fi.
❹ CHANNEL DISPLAY
applicable to this program.
Indicates the selected channel (or LINE1, LINE2).
❺ STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
❻ DATE DISPLAY
CH 4
WABC STEREO
PROGRAM DETAILS
“Home video”
SP
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Shows the current date. (Month/Date/Day of the week
format)
“Home video”
FEB 7 , MON
2:15 PM
❼ CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining
time on the tape.
Easy Information Screen
(Program details)
Easy Information Screen
(Station ID)
On-Screen Menus Setup
Each press of MEMORY/ENTER changes the TV
on-screen displays in the following sequence.
The SETUP, clock setting (CLOCK), and timer
recordings (PROGRAM) functions are accessed
conveniently with the on-screen menus, that lead you
through each step. The following pages describe the
on-screen menu selections available.
STOP
SP
CH
STEREO
4
MENU SELECTION
JUL 5 , SAT
2:15 PM
2:15 PM
Your VCR allows remote control adjustment of several
features.
0:35:40
1. Press MENU and the MAIN menu will appear.
REM 1:58
2. Select the desired menu with v/V button and then
press MEMORY/ENTER.
Notes:
Note:
Menus remain on-screen for 3 minutes.
ꢀ
ꢀ
ꢀ
The function displays remain on the TV screen for 5
seconds.
MAIN MENU
The clock (or tape counter, tape remaining) mode will
continue to be shown until you press MEMORY/ENTER.
The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the
remaining tape length indicator appears after any tape
operation.
CLOCK SET (page 23)
PROGRAM (page 31)
TUNING (page 22)
SETUP (page 22)
3. Press MENU when finished.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Setup Menu Options
Channel Selection
This Home Theater System is equipped with a
frequency synthesized tuner capable of receiving up
to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to select the SETUP menu, then press
MEMORY/ENTER.
The SETUP menu will appear.
Preparation:
ꢀ Connect the Home Theater System to the desired type of
antenna or cable TV system, as shown in Connecting
Antenna/Cable TV to Home Theater System on page 13.
AUTO CHANNEL PROGRAMMING
3. Use v/V to choose a desired option on the SETUP
menu. Then use b/B to choose a desired setting.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to select the TUNING menu, then press
MEMORY/ENTER.
The TUNING menu will appear.
FUNCTION OSD
The on-screen display of this Combi Receiver can be turned on
or off.
ꢀ FUNCTION OSD: Choose ON and OFF with b/B.
LANGUAGE SELECT
The on-screen programming of this Combi Receiver can be
displayed in either English, Spanish, or French.
ꢀ LANGUAGE SELECT: Choose ENGLISH, SPANISH, or
FRENCH with b/B.
AUDIO MODE
The Home Theater System has two separate audio playback
systems, the high quality VHS Hi-Fi system and standard
NORMAL mono system. The same audio is generally
recorded on both systems. The VHS Hi-Fi system plays on
separate (left and right) channels, and the NORMAL system
plays monaural sound. The normal track is always played so
the cassette can be played on a Combi Receiver that does
not have VHS Hi-Fi.
3. Use V to choose the SOURCE SELECT option,
then use b/B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1 or
LINE2.
4. Use v/V to choose the AUTO CHANNEL SET
option, then use b/B to search for channels.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
ꢀ AUDIO MODE: Choose Hi-Fi or NORMAL with b/B.
BROADCAST TYPE (STEREO/SAP/MONO)
Multichannel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) bilingual signals. Set this display
to the desired position when both MTS stereo and SAP signals
are received. When only one of the MTS signal is received, the
Combi Receiver automatically selects the corresponding
receiving mode (Stereo or SAP) regardless of the selected
position. For normal operation, the display should be in the
STEREO position. The Combi Receiver will then record a
STEREO program when available, and record a mono program
IF the program is NOT IN STEREO.
5. After the AUTO CHANNEL SET PROCEEDING is
complete, make sure the TUNING BAND is set
appropriately (TV or CATV). Choose the correct
TUNING BAND (TV or CATV) with b/B while in the
TUNING menu.
Remember, TV is for the air antenna reception,
CATV is for cable or wireless cable connection.
For weak STEREO and/or SAP broadcasts, changing the
display to mono may give clearer sound.
6. Press MENU to return to the TV screen.
ꢀ BROADCAST TYPE: Choose STEREO, SAP, or MONO
with b/B.
7. Use TRK/PRESET(-/+) (v/V) on the remote control
to cycle the Home Theater System through the
channels in memory.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL)
is in HI-FI position] for selecting the audio output signals
from the AUDIO OUT terminals (L ch and R ch), and
RF.OUT.
This display setting should normally be left in the stereo
position, so that when a stereo tape is played, the stereo
sound will be heard through the left and right channels. If a
mono tape is played and the audio output is set to stereo,
the same mono sound will be heard from both left and right
channels.
TO ADD OR ERASE CHANNELS FROM
MEMORY
This feature allows you to add or erase channels from
memory manually.
1
2
3
Use V to choose the CH. ADD/DEL option on the
TUNING menu. Use b/B to select a channel to
add or erase.
ꢀ AUDIO OUTPUT: Choose STEREO, LEFT, or RIGHT with
b/B.
Use MEMORY/ENTER to add or erase the
channel.
Repeat steps 1 and 2 to add or erase channels.
POWER SAVE MODE
Set POWER SAVE MODE to ON to your Home Theater
System into an economic power saving mode.
ꢀ The display turns off when the unit is in standby mode.
Press MENU to remove menu.
4.Press MENU when finished.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Setting the Clock
There are cases where the TV station does not send or
sends wrong date and/or time information and the Home
Theater System sets the incorrect time.
If this happens we recommend that you set the clock
manually.
The Home Theater System gives you two ways to set
the time and date: the Auto Clock Feature or manually.
The Auto Clock feature enables the Home Theater
System to set up the clock while the Home Theater
System is turned off.
MANUAL CLOCK SET
Things to know before starting
The clock uses the 12-hour system. (Be sure to set AM
1. Press MENU and the MAIN menu will appear.
ꢀ
2. Use v/V to choose the CLOCK menu.
Press MEMORY/ENTER and the CLOCK menu will
appear.
and PM correctly.) (AM does not appear.)
ꢀ
The initial Clock Setting is JANUARY 1, 2005, 12:00 AM.
AUTO CLOCK SET
SAT
2005
The Auto Clock Set feature is set to ON at the factory. In the
ON setting, the Combi Receiver looks for a channel carrying
XDS (Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
The Auto Clock feature enables the Combi Receiver to
set up the clock while the Combi Receiver is turned off.
3. Use b/B to choose the month.
4. Use V to choose the DAY option.
Use b/B to choose the date.
The day of the week will display automatically.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the CLOCK menu.
Press MEMORY/ENTER and the CLOCK menu will
appear.
5. Use V to choose the YEAR option.
Use b/B to choose the year.
6. Use V to choose the TIME option.
Use b/B to choose the time.
Press and hold b/B to advance clock
continuously.
SAT
2005
7. Use E to choose the DAYLIGHT SAVINGS option.
Use F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
3. Use V to choose the AUTO CLOCK SET option.
Use b/B to choose ON.
The Auto Clock Set feature is set to ON at the factory. In
the ON setting, the Combi Receiver looks for a channel
carrying XDS (Extended Data Services) information. XDS
updates the clock using the Coordinated Universal Time.
4. Use E to choose the DAYLIGHT SAVINGS option.
Use F or G to choose AUTO, ON, or OFF.
If you choose AUTO, the VCR sets the clock using the
DST information broadcast in the signal (channel).
If you choose ON, the VCR adjusts the clock for Daylight
Saving Time automatically.
8. Press MENU when finished.
5. Use E to choose the TIME ZONE option.
Use F or G to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
Note:
If setting the clock manually, “AUTO CLOCK SET”
must set to “OFF”.
If set to “ON”, an incorrect date and/or time will be
entered again when the Home Theater System is
turned off.
PACIFIC, ALASKA or HAWAII).
If “AUTO” is selected as the time zone, the VCR sets the
clock using the first Coordinated Universal Time
information it finds in a broadcast signal.
6. Press MENU when finished.
7. Turn off the Home Theater System and the auto
clock set feature sets the time.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation Seup
On-Screen Display
Example: On-Screen Display during
playing DVD Video
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Items
Selection Method
b
/
B, Numbers
Title Number
1 / 3
ENTER
1. Press DISPLAY during playback.
b
/
B
ENTER
, Numbers
Chapter Number
Time search
1 / 12
2. Press v / V to select an item.
The selected item is highlighted.
Numbers, ENTER
0:20:09
3. Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Audio language
and Digital Audio
Output mode
b
AUDIO
/
B
or
b
/
B
or
Subtitle language
Angle
ABC
1 ENG
1 / 3
SUBTITLE
Notes:
b
ANGLE
/
B
or
• Some discs may not provide all of the features
shown below.
3D SUR
Sound
b
/
B
• If no button is pressed for 10 seconds, the on-
screen display disappears.
Example: On-Screen Display during
playing DVD Audio
PLAYBACK STATUS/RESTRICTIONS
Title
Repeat title
Items
Selection Method
A - B
Repeat sequence
b
/
B
ENTER
, Numbers
Group Number
1 / 9
Enter a Marker
MARKER SEARCH
b
/
B
ENTER
, Numbers
Marker Search menu
Track Number
Time search
Resume play from this point
Display only
or
0:20:09
Action prohibited or not available
Audio language
and Digital Audio
Output mode
b
AUDIO
/
B
ABC
OFF
Subtitle language
Page (or Angle)
Display only
b
/
B
or
or
ANGLE
1 / 3
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
b
/
B
ENTER
, Numbers
Track Number
1 / 3
Numbers, ENTER
Time search
0:20:09
Audio language
and Digital Audio
Output mode
1
b
AUDIO
/
B
or
MP3
b
/
B
or
Subtitle language
Sound
ENG
ABC
SUBTITLE
3D SUR
b
/
B
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Initial Settings
DISPLAY
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 25 to 28.
TV Aspect
16
:
9
Display Mode
Progressive Scan
Widescreen
Off
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
Move
Select
To go to the next level:
Press B on the Remote Control.
DVD-V
DVD-A
TV ASPECT
4:3: Select when a standard 4:3 TV is connected.
To go back to the previous level:
Press b on the Remote Control.
16:9 Wide: Select when a 16:9 wide TV is connected.
General Operation
DVD-V
DVD-A
DISPLAY MODE
1. Press SETUP. The Setup menu appears.
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
3. Use v / V to select the second desired option then
press B to move to the third level.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
PROGRESSIVE SCAN
Progressive Scan Video provides the highest quality
pictures with less flickering.
5. Press SETUP or PLAY to exit the Setup menu.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible with
a progressive scan signal, set Progressive Scan to
On.
Language
LANGUAGE
English
Original
Off
Menu Language
Disc Audio
To Turn ON progressive scan:
Disc Subtitle
Disc Menu
Original
Connect component out of the DVD to the input of
your monitor/television, set your television or monitor
to Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press B.
Move
Select
MENU LANGUAGE
DISPLAY
Select a language for the Setup menu and on-screen
display.
TV Aspect
Display Mode
Progressive Scan
On
Off
DVD-V
DVD-A
DISC AUDIO / SUBTITLE / MENU
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Prev.
Move
Enter
Original: Refers to the original language in which the
disc was recorded.
2. Select “On” using the v / V buttons.
Other: To select another language, press number
buttons then ENTER to enter the corresponding 4-
digit number according to the language code list in the
reference chapter. If you enter the wrong language
code, press CLEAR.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
Note:
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if
you try Progressive Scan on the Home Theater
System .
Each DVD disc has a variety of audio output options.
Set the receiver’s AUDIO options according to the
type of audio system you use.
AUDIO
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b / B
buttons to highlight Enter.
5.1 Speaker Setup
Select
DRC
On
On
Vocal
5. Pressing ENTER will set the receiver to
Progressive scan mode.
Caution:
Move
Select
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit. First,
remove the disc in the Home Theater System. Next,
press STOP ( x ) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be
visible on a conventional analog TV or monitor.
DVD-V
DVD-A
5.1 SPEAKER SETUP
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See “5.1 Speaker Setup”, page 33.)
DYNAMIC RANGE CONTROL (DRC)
DVD-V
DVD-A
With the DVD*1 format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1:Dolby Digital only
DVD-V
VOCAL
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
PASSWORD (SECURITY CODE)
Lock (Parental Control)
LOCK
You can enter or change password.
Rating
Unlock
New
1. Select Password on the LOCK menu then press B.
Password
Country Code
U S
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
Move
Select
4. Press SETUP to exit the menu.
DVD-V
RATING
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative.
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
3. Enter a new code as described above.
DVD-V
COUNTRY CODE
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
1. Select “Country Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character
using v / V buttons.
3. Select a rating from 1 to 8 using the v / V buttons.
5. Press ENTER to confirm your country code
selection.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set a rating for the receiver, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
DIVX(R) VOD DivX
The Auto Play, B.L.E. and DivX(R) VOD settings can
be changed.
You can show the DivX DRM (Digital Right
Management) Registration code for your unit only.
OTHERS
DivX(R) Video On Demand
Auto Play
Off
B.L.E.
On
Your registration code is : XXXXXXXX
DivX(R) VOD
Select
To learn more visit
(Done)
Select
Move
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt move file.
DVD-V
AUTO PLAY
You can set up the Home Theater System so a DVD
disc automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this Home Theater
System will search for title that has the longest
playback time and then play back the title
automatically.
Notes:
If you rent the DivX VOD file, it has several options of
viewing limits as shown below.
• Display the number which you can watch the file.
On: Auto Play function is active.
View DivX(R) VOD Rental
This rental has 3 view left.
Off: Auto Play function is not active.
Do you want to use one
of your 3 views now?
Note:
• The Auto Play function may not work for some
DVDs.
(Yes) (No)
B.L.E. (BLACK LEVEL EXPANSION)
• The rental has been expired.
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Rental Expired
(Done)
Off: Standard grey scale. (7.5 IRE cut off)
• Display the authorization error.
Authorization Error
This player is not authorized
to play this video.
(Done)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Operation
Normal Playback
Special Effect Playbacks
Preparation:
ꢀ Turn on the TV.
ꢀ Tune the TV to the Combi Receiver output channel (CH 3
or 4) or set the TV’s source selector to VIDEO.
Notes:
• Horizontal lines (noise bars) will appear on the TV screen.
This is normal.
• The audio is automatically muted during special effect
modes, so there is no sound during search.
• During high-speed picture search mode, a short period is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this
period.
ꢀ
If a direct VIDEO connection is made between the Combi
Receiver and the TV, set the TV’s source selector to VIDEO.
ꢀ Set the Output Source to VCR as shown in Setting the
Output Source on page 6.
1. Insert a prerecorded video cassette.
Search
The indicator will light and the Combi Receiver will
power-up automatically.
This function lets you quickly and visually search for a
desired tape section in either direction: forward or
reverse.
ꢀ Make sure that the
indicator in the display
1. Press BACKWARD (.) or FORWARD (>)
during playback.
window is not lighted. If it is, press POWER once.
ꢀ If a tape without a safety tab is inserted, the unit will
start playback automatically.
The Home Theater System will be activated in the
SEARCH mode.
2. Press PLAY ( B) once.
ꢀ If the Home Theater System is left in the SEARCH
mode for more than 3 minutes, the Home Theater
System will automatically enter the PLAY mode, to
protect the tape and video heads.
2. To return to playback, press PLAY ( B).
PLAY appears on the TV screen .
ꢀ It is not necessary to select the tape speed for
playback. It will be automatically selected by the Combi
Receiver.
ꢀ In playback, the TV/VCR selector switches to VCR
mode automatically.
Still Picture & Frame-by-Frame Playback
1. Press PAUSE/STEP (X) during playback.
3. Press STOP (x) to stop playback.
STOP appears on the TV screen.
Picture movement will stop on one frame.
ꢀ If the still picture vibrates vertically, stabilize it using
v/V on the remote control.
ꢀ If the Combi Receiver is left in the STILL mode for more
than 5 minutes, the Combi Receiver will automatically
enter the STOP mode to protect the tape and video
heads.
ꢀ If the tape reaches the end before STOP (x) is
pressed, the Combi Receiver will automatically stop,
rewind and eject the tape, and it will turn itself off.
Tracking Control
AUTO TRACKING
The automatic tracking function adjusts the picture to
remove snow or streaks.
2. Press PAUSE/STEP (X) repeatedly to advance the
video one frame at a time while viewing a still
picture in Still mode.
The AUTO TRACKING function works in the following
cases:
ꢀ A tape is played back for the first time.
ꢀ Tape speed (SP, LP, SLP) changes.
ꢀ Streaks or snow appear because of scratches on the tape.
3. To return to playback, press PLAY ( B).
Slow Motion
1. While in Still mode, press FORWARD (>).
The tape will be played back at a speed 1/19 times
slower than the normal speed.
MANUAL TRACKING
ꢀ During slow playback, use v/V on the Remote Control
to minimize noise bands.
ꢀ If slow motion mode continues for more than 3 minutes,
the Home Theater System will automatically change to
playback mode.
If noise appears on the screen during playback, press
either TRK/PRESET (-/+) v/V on the remote control
until the noise on the screen is reduced.
ꢀ If vertical jitter is present, adjust tracking controls very
carefully.
2. To return to playback, press PLAY ( B).
ꢀ Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3
seconds.
CM Skip (Commercial Skip)
This is useful for skipping commercials or short
program
segments.
1. Press CM SKIP during playback.
The tape will fast forward picture search through 30
seconds of recording.
ꢀ Skipping time can be extended by pressing CM SKIP
repeatedly.
ꢀ Subsequent presses result in advancing the fast forward
picture search time by 30-second increments (maximum
3 minutes).
Note:
• Only 2-channel stereo (Front Left, Front Right &
Subwoofer) is available for VCR mode, thus sound
might not be heard from center or rear speakers
during VCR playback. (For further details about
sound mode, please refer to page 20)
2. When the search is complete, the Home Theater
System will go into playback mode automatically.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal Recording
Timer Recording
Preparation:
ꢀ Turn on the power of both the Home Theater System and
TV.
ꢀ Tune the TV to the Home Theater System output channel
(CH 3 or 4) or set the TV’s source selector to VIDEO.
ꢀ If a direct VIDEO/AUDIO connection is made between the
Home Theater System and the TV, set the TV’s source
selector to VIDEO.
This Home Theater System can be programmed to
record up to 8 programs within a period of 1 year. For
unattended recording, the timer needs to know the
channels to be recorded and the starting and ending
times.
Things to know before starting
If you try to set the program timer before setting the
ꢀ
clock, PLEASE SET THE CLOCK appears for a
moment and then CLOCK menu appears on the TV
screen. Set the time and date before proceeding.
1. Insert a video cassette with the anti erasure safety
tab intact.
2. Select the desired channel with v/V.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1 or
LINE2 with INPUT.
ꢀ
Make sure a tape is in the Combi Receiver and the anti
erasure safety tab is in place or the tape will be
automatically ejected.
3. Set the desired recording speed (SP or SLP) with
SPEED.
Preparation:
ꢀ Turn on the power of both the Home Theater System and
the TV.
ꢀ
This Combi Receiver is not designed to record in LP
mode.
ꢀ
Be sure the TV is set to the Home Theater System output
channel (3 or 4).
4. Set the MTS mode as desired (See page 22, 23).
5. Press REC/ITR (z) once.
ꢀ Make sure the TUNING BAND in the TUNING menu is set
appropriately (TV or CATV).
Recording will start. (The REC indicator will light in
the display window.)
1. Press MENU and the MAIN menu will appear.
ꢀ
ꢀ
REC indicator appears only when the Output Source is
set to VCR.
2. Use v/V to choose the PROGRAM menu.
3. Press MEMORY/ENTER to go to the PROGRAM
menu.
The PROGRAM menu will appear.
If a cassette with no anti erasure safety tab is loaded, the
cassette will be ejected automatically.
6. Press STOP (x) twice to stop recording.
ꢀ If all 8 programs have been entered, FULLY
PROGRAMMED message will appear for a moment
and then PROGRAM 1 will appear on the TV screen.
If the tape reaches the end before STOP (x) is pressed,
the Home Theater System will automatically stop, rewind,
eject the tape and turn itself off.
Pausing the recording
1. Press PAUSE/STEP (X) to pause the tape during
recording.
The REC indicator will flash in the display window.
2. When you want to continue recording, press
PAUSE/STEP (X) or REC/ITR (z).
ꢀ After 5 minutes in Pause mode, the tape will be
stopped automatically to protect the tape and the video
heads.
4. Use b/B to choose the PROGRAM No. (1-8).
5. Use V to choose the MONTH option.
Use b/B to choose the desired month.
6. Use V to choose the DAY option.
Use b/B to choose the desired day.
To record one TV program while
watching another
1. Use TV/VCR to select the TV mode while
7. Use V to choose the START option.
Use b/B to choose the desired start time.
recording.
The TV indicator appears.
2. Using the TV, select the channel to be viewed.
8. Use V to choose the STOP option.
Use b/B to choose the desired stop time.
9. Use V to choose the CHANNEL option.
Use b/B to choose the desired channel (Channel,
LINE1 or LINE2).
Tip:
Always use PAUSE/STEP (X) for best results when making
changes while recording.
For example: To change channels while recording, first press
Cable Users: If you have CABLE TV and used Cable
Box in Connecting Antenna/Cable TV to Home Theater
System (page 11), using a cable box converter, you must
set the channel in this step to match the cable box output
channel (usually CH 3 or 4). Change channels on the
cable box instead of with the Home Theater System.
PAUSE/STEP (X) to put the unit in pause mode. Select the
desired channel on the Home Theater System, then press
PAUSE/STEP (X) again to resume recording.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Use V to choose the SPEED option.
Use b/B to choose the desired recording
speed (AUTO, SP or SLP).
Notes:
• If the power fails or the Home Theater System is
unplugged from the AC outlet, the correct clock time and
timer settings are kept in memory for approximately 3
seconds. After 3 seconds, the clock and program timer
must be reset when power is restored. Reset the clock
according to instructions.
ꢀ AUTO mode determines how much tape is left and
switches speed from SP to SLP, if necessary, to
complete recording the program. There will be
some picture and sound distortion at the point of
the speed change.
• After timer recording is completed, the Home Theater
System will turn off automatically.
11. Use V to choose the REPEAT option.
Use b/B to choose the desired repeat (ONCE,
WEEKLY or DAILY).
•
To watch a TV program while timer recording is in progress,
select Tuner mode by pressing TV/VCR repeatedly.
ONCE event....for recording up to 8 programs on a
single day or over the days within a period of 1 year.
WEEKLY event....for recording up to 8 programs on
a certain day of every week.
•
If you wish to stop timer recording which has already started,
press STOP or POWER twice.
DAILY event....for recording up to 8 programs at the
same time(s) Monday through Friday.
Checking (Erasing) Timer Record
Programming
Programming can be checked whenever the Home
MAY
8
Theater System is turned on.
1. Press MENU and the MAIN menu will appear.
2. Use v/V to choose the PROGRAM menu.
Press MEMORY/ENTER and the PROGRAM menu
will appear.
Tip:
If the input data is wrong, use v to select the data and
correct it using b/B.
MAY
8
12. Press MENU, the program will be memorized
by the Home Theater System.
3. Use b/B to select a program you want to check or
erase. If you want to erase the program, press
CLEAR.
ꢀ
indicator lights in the display window.
ꢀ If the program preset time has past, the PAST
TIME PROGRAMMED message will appear on the
TV screen. Return to the incorrect program and
program it with the correct time.
4. Press MENU to return to the TV screen.
ꢀ If you had entered a past date, timer recording will
be performed on that date of the next year.
ꢀ Additional programs may be entered by repeating
steps 1-12.
Program Priority
If the recording start and end times of preset
programs overlap on the same day (see the example
and diagram left), program number 2 will not be
recorded until program
Cable Users: If your cable hookup is via a TV
converter box, you can program multiple recordings
only on the converter box output channel. This is
because the converter determines what channel you
view through your Home Theater System.
number 1 is finished.
The first part of program
number 2 will not be
recorded. The same thing
will happen to program
number 3.
Tip:
If you are finished programming and you want to set the
Home Theater System to record the programs you have
entered,
MAKE SURE YOU HAVE INSERTED A TAPE INTO THE
HOME THEATER SYSTEM. The Home Theater System is
now set to record the preset programs.
After setting up a timer recording, recording will start if no
other timer recordings overlap the start time, see next
column.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Instant Timer Recording
Dubbing and Editing
If you wish to edit or dub your camcorder (or another
VCR) recordings to this Home Theater System, the
rear (or Front) panel mounted Audio and Video (A/V)
input jacks make the connections quick and easy.
These direct A/V jacks will also provide better picture
results than using the RF jack on the rear panel.
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
programmable timer.
Preparation:
ꢀ Turn on the power of both the Home Theater System and
the TV.
1. Connect the camcorder’s (or another VCR’s) A/V
outputs to your Home Theater System as illustrated
on page 14.
ꢀ Be sure the TV is tuned to the Home Theater System
output channel (3 or 4).
ꢀ If a direct VIDEO/AUDIO connection is made between the
Home Theater System and the TV, set the TV’s source
selector to VIDEO.
2. Set the input channel “LINE2”. (Use INPUT to
select LINE2.)
ꢀ
If you have connected your Home Theater System to
the A/V input jacks on the rear of Home Theater
System, you should select the input channel LINE1 by
pressing INPUT twice.
1. Insert a video cassette with the anti erasure safety
tab intact.
2. Select the desired channel with v/V or number (0-
9).
3. Play the tape in the camcorder (or another VCR). If
you have a TV attached to your Home Theater
System, you can see the video playing.
The channel number appears on the TV screen.
ꢀ If you are recording from another source via audio/video
input jacks (at the Rear or Front panel), select LINE1 or
LINE2. with INPUT.
4. When you desire the recording to begin, press
Home Theater System’s REC/ITR (z) once to start.
3. Select the desired recording speed (SP or SLP)
with SPEED.
The tape speed will appear on the TV screen.
Notes:
• Before recording, please confirm the recording start
4. Press REC/ITR (z) twice.
The menu as illustrated, will appear on the TV screen.
position.
• To stop the editing, press STOP (x) twice.
ꢀ Recording will start. (The
indicator will light)
5. Press REC/ITR (z) repeatedly to select the
recording time length.
Copying from DVD to VCR
At the end of the recording, the Home Theater
System will stop recording and shut off.
ꢀ While Instant Timer Recording is active, changing the
channel on the Home Theater System will not be
possible.
This unit is capable of copying the contents of a DVD
to a VHS tape.
Note:
If the DVD you are attempting to copy is copy protected, you
will not be able to copy the disc. It is not permitted to copy
Macrovision encoded DVDs. “LOCK” is displayed in the
display window.
ꢀ To stop the recording, press STOP or POWER twice.
0H30M ..... 9H00M ➝ 0H00M
INSTANT TIMER RECORD
CHANNEL
SPEED
2
SP
Length Display
(each additional press of
REC/ITR (z) increases recording
time 30 minutes)
1. Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert VHS Tape
START
NOW
LENGTH
0H30M
Insert a blank VHS video tape into the VCR deck.
3. Press PLAY ( B) on the DVD deck.
The DVD will go into play mode
ꢀ If the DVD disc menu appears, you may need to press
PLAY ( B) manually to begin copying.
Checking the Recording Time
Press REC/ITR (z) once to check the recording time.
The recalled setting will automatically return to the TV
screen after 6 seconds.
4. Press REC/ITR (z) on the front panel or remote
control.
ꢀ The Home Theater System will go into Record mode.
ꢀ “COPY” indicator will light.
5. Stop the Copy Process
To extend the Recording Time
The recording time can be extended anytime by
pressing REC/ITR (z).
Subsequent presses result in advancing the recording
time by 30-minute increments.
When the DVD is finished playing, press STOP (x) or
POWER twice to end copying.
You must stop the Copy process manually when the DVD
movie ends, or the unit may replay and record over and
over again.
Notes:
• If you press PAUSE/STEP (X) while in instant timer
recording mode, the Home Theater System will enter the
recording pause mode. Instant timer recording is
cancelled.
Note:
When you stop the DVD playback during copying, VCR
recording mode also stops automatically.
• If the Home Theater System is set to “0H00M”, the Home
Theater System goes to normal recording mode.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
MTS (Multichannel TV Sound)
VHS Hi-Fi Stereo System/
MTS Broadcast
This Home Theater System will decode MTS stereo and
bilingual (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable
companies, as long as they operate on assigned cable
frequencies and use the EIA-recommended MTS
This Home Theater System is equipped with the VHS
Hi-Fi audio sound system for recording and playback.
The information below gives a brief description of Hi-Fi
audio and how to record and play a tape in the Hi-Fi
audio mode.
stereo/bilingual TV sound system.
Multichannel TV Sound Indicator
Shows onscreen as illustrated below when MEMORY/
1. Set the AUDIO MODE option to Hi-Fi on the SETUP
menu .
ENTER is pressed.
ꢀ
One or both of the indicators will light, depending on the
MTS broadcast.
TV screen
STEREO
CH 4
STEREO/SAP
Lights up when a stereo broadcast
is being received.
SAP
Lights up when a SAP BILINGUAL
broadcast is being received.
2. Set the AUDIO OUTPUT option to STEREO
position.
If only STEREO appears on the TV screen.
The Home Theater System can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE option is in
the STEREO position. The Home Theater System will also
record mono audio onto the mono audio track.
(STEREO) POSITION: The left channel sound (L) is
heard from the left speaker and the right channel sound
(R) is heard from the right speaker.
(LEFT) POSITION: The left channel sound (L) is heard
from both speakers.
If only SAP appears on the TV screen.
Set the BROADCAST TYPE option to SAP.
(RIGHT) POSITION: The right channel sound (R) is heard
from both speakers.
If STEREO/SAP appears on the TV screen
Use the BROADCAST TYPE option to select the desired
recording mode (STEREO or SAP).
SAP (Second Audio Program) Recording
Some stations transmit a Second Audio Program, which
is used for a second language or additional information.
When the station broadcasts a Second Audio Program,
follow the procedure below to record the SAP.
3. Press MENU.
4. Insert a cassette and press PLAY ( B).
Adjust volume at your stereo system.
1. Insert a video cassette with the anti erasure safety
tab intact.
2. Set the BROADCAST TYPE option to SAP (SETUP
menu).
Do this if only the SAP appears on the TV screen or you
know the program will use the SAP.
3. Press MENU.
4. Select the desired recording speed (SP or SLP) with
SPEED.
5. Select the desired channel. SAP should appear on
the TV screen.
6. Press REC/ITR (z) once
You are now recording the program you see and hear on the
TV.
7. Press STOP (x) twice to stop recording.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Counter Memory Feature
Additional Information
ꢀ
ꢀ
ꢀ
ꢀ
In manual recording, Timer recording, Instant Timer
Recording, playback, or fast forward modes, the Combi
Receiver automatically starts rewinding the tape at the
end of the tape. The cassette will stop at the beginning of
the tape and be ejected, and the Home Theater System
will turn itself off.
Real-Time Counter
Shows length of tape run in hours, minutes, and
seconds. Press CLK/CNT to select the real-time
counter display.
Every press of CLK/CNT changes the TV screen
display as illustrated below.
After you have finished using the Home Theater System,
rewind, eject, and remove the cassette. Place the
cassette in its protective sleeve to protect it from dust. It
is not necessary to rewind the cassette before removing
it, but if you do, it will be ready to play or record the next
time you use it.
2:15 AM
CLOCK
0:05:25
COUNTER
REM 1:07
REMAINING TIME
Be sure the Home Theater System Channel Selector is
on the correct channel you wish to record. The channel
that is being recorded can always be checked by tuning
the television to the Home Theater System channel (3 or
4) and using the TV/VCR selector to turn the Combi
Receiver’s TV indicator off.
ꢀ
ꢀ
ꢀ
Counter changes to “0:00:00” when the cassette is
ejected.
The real-time counter does not operate if nothing is
recorded on the tape.
The real-time counter will not work unless a tape is
inserted.
Do not attempt to hook up more than one television set to
the Home Theater System for either recording or
playback.
Counter Memory Feature
This is useful if there is a section of tape you want to
view immediately after recording or if you want to
return to the same point several times.
Auto Play System
This Home Theater System features automatic
playback.
Load a cassette (with the safety tab removed).
1. Begin recording or playing a tape.
2. Press CLK/CNT repeatedly to display the
real-time counter on the TV screen.
ꢀ
The Output Source is changed to VCR mode
automatically.
3. At the point that you want to locate later, reset the
real-time counter to “0:00:00” by pressing CLEAR.
ꢀ
ꢀ
The power turns on automatically and playback begins.
At the end of the tape, the Home Theater System stops
and rewinds the tape.
4. Continue to play or record.
5. Press STOP (x) once or twice when recording or
playback finishes.
ꢀ
The cassette is ejected after rewinding and the VCR turns
itself off automatically.
6. Press BACKWARD (.).
The tape automatically stops when the tape counter
returns to about “0:00:00”.
LOAD
AUTO
AUTO
POWER
OFF
AUTO
PLAY
AUTO
REWIND
TAPE
EJECT
Tape Remaining
This function shows the remaining time on the tape
during recording or playback.
Press CLK/CNT repeatedly until the REM indicator
appears on the TV screen during recording or
playback.
Note:
Auto power off does not function during regular DVD play
mode. (Home Theater System power stays on.)
Note:
The remaining tape length indicator may not be displayed
correctly depending on the condition of the tape and the kind
of the tape (T-140, T-160, or T-210 etc.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Operation
Playing a DVD
TO OPEN ALL DISCS
Press EJECT ALL on the unit to open all disc tray in
the drawer during playback or stop.
PLAYBACK SETUP
Turn on the TV and select the video input source
connected to the Home Theater System.
“EJECT ALL” will appear in the display window.
You can check a disc in the disc tray.
TO INSERT DISCS
TO SELECT A PLAYBACK DISC
1. Press OPEN SEL./CLOSE on the unit.
“OPEN SEL” will appear in the display window.
2. Press the desired DISC (1-5) on the unit.
Press DISC SEL. and press desired disc button (DISC
1-5) on the remote control.
Tip:
You can also use the disc number play buttons on the
unit.
The selected disc tray number will appear in the
display window and on the TV screen.
The drawer comes out and selected disc tray
slides out.
Notes:
• To ensure good system performance, wait until the disc
tray completely read the disc(s) before proceeding.
• The Home Theater System.is only able to read the status
of the current selected disc tray.
3. Place a disc.
Label side up
When placing an 8 cm
(3 inches) disc
TO REPLACE DISCS DURING PLAYBACK
You are able to replace or load a disc into the other
four trays without interrupting current playback.
While playback, press OPEN SEL./CLOSE and press
the desired DISC (1-5) on the unit to open disc tray
(refer to “TO INSERT DISCS).
Disc tray
Notes:
Drawer
• If you press OPEN SEL./CLOSE of the active disc tray, the
disc will stop playing and the disc tray will slide out.
• Once the disc tray is opened, it will be deselected.
• Do not place more than one compact disc on one disc tray
at the same time.
4. Press OPEN SEL./CLOSE to close the tray.
Playback starts automatically. If playback does not
start, press PLAY(2).
In some cases, the disc menu might appear
instead:
• Do not push the drawer to close the one, as you may
damage the unit.
DVD-V
TO PLAY ALL DISCS ON THE DISC
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or MENU to return to the menu
screen.
CD
TRAYS
Press PLAY(2) on the remote control or on the unit.
All the available discs will play once, then stop.
DVD-A
Tip:
Use the 1 2 3 4 buttons to select an option you
want, then press ENTER to view the option.
During playback, track number and elapsed playing
time of the current track will appear in the display
window.
Notes:
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 27).
Note:
• This function is not available during Repeat playback or
Programmed playback mode.
• DVDs may have a region code. Your Home Theater
System does not play discs that have a region code
different from your receiver. The region code for this
receiver is 1 (one).
35
Download from Www.Somanuals.com. All Manuals Search And Download.
STILL PICTURE AND FRAME-BY-FRAME
General Features
DVD-V
DVD-A
DivX
PLAYBACK
Note:
1. Press PAUSE/STEP(X) on the remote control
during playback. Advance the picture frame-by-
frame by pressing PAUSE/STEP(X) repeatedly.
• Unless stated otherwise, all operations described
use the remote control. Some features may also be
available on the Setup menu.
2. To exit still motion mode, press PLAY(2).
MOVING TO ANOTHER TITLE/GROUP
DVD-V
DVD-A
Note:
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
When a disc has more than one title/group, you can
move to another title/group. Press DISPLAY while
playback is stopped then the appropriate number (0-9)
or use b / B to move to another title/group.
You can play any title by inputting its number while
playback is stopped.
DVD-V
DVD-A
DivX
SLOW SCAN
1. Press PAUSE/STEP(X) during playback.
The Home Theater System will now go into
PAUSE mode.
MOVING TO ANOTHER CHAPTER/TRACK
DVD-V
DVD-A
DivX
2. Use the BACKWARD . or FORWARD > to
select the required speed: t 1/16, t 1/8, t 1/4,
or t 1/2 (backward), or T 1/16, T 1/8, T 1/4,
or T 1/2 (forward).
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
With a DivX Disc, the Slow speed changes: T
1/16, T 1/8, T 1/4 or T 1/2 (forward).
•
Press BACKWARD . or FORWARD > briefly
during playback to select the next chapter/track or
to return to the beginning of the current
chapter/track.
3. To exit Slow Motion mode, press PLAY (2).
Notes:
• Slow motion playback in reverse is not possible with
DivX Discs.
• When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
•
•
Press BACKWARD . twice briefly to step back
to the previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
DVD-V
DVD-A
DivX
REPEAT A-B
To repeat a sequence.
1. Press A-B at your chosen starting point. “ A
appears briefly on the TV screen.
”
DVD-V
DVD-A
DivX
*
SEARCH
1. Press and hold BACKWARD . or FORWARD
> for about two seconds during playback.
2. Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen and the
repeat sequence begins.
2. Press and hold BACKWARD . or FORWARD
repeatedly to select the required speed.
DVD, DivX disc; X2, X4, X16 or X100
3. Press A-B again to cancel.
3. To exit SEARCH mode, press PLAY (2).
Note:
• When using a DVD audio disc that includes
pictures, this operation may be permitted in some
picture segments.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD-V
DVD-A
DivX
DVD-V
DVD-A
DivX
REPEAT
ZOOM
You can play a title/chapter/all/track/group on a disc.
Press REPEAT during playback to select a desired
repeat mode.
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
• Off : does not play repeatedly.
Screen fit mode:
DivX discs - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
You can change the way the image appears on the
screen when you’re playing a DVD movie. Press
3/4 to select between Normal, Enhanced, and
Maximum.
DVD Audio Discs - Repeat Track/Group/Off
• Track: repeats the current track.
• Group: repeats the current Group.
• Off : does not play repeatedly.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press CLEAR.
Notes:
Note:
• If you press FORWARD > once during Repeat Chapter
(Track) playback, the repeat playback cancels.
• Zoom may not work on some DVDs.
• Screen fit mode is available for playing the DVD disc, VR
disc and movie file.
DVD-V
DivX
3D SURROUND
DVD-V
DivX
MARKER SEARCH
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
To enter a Marker
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
1. Press DISPLAY during playback.
2. Use 3 or 4 to select the sound option.
The sound option will be highlighted.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
3. Use 1 or 2 to to select “3D SURR.”.
To turn off the 3D Surround effect, select “BYPASS”.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
DVD-V
DivX
TIME SEARCH
3. Press MEMORY/ENTER and playback starts from
the marked scene. Or, Press CLEAR and the
marker number is erased from the list.
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
4. You can play any marker by inputting its number
on the marker search menu.
2. Press v / V to select the time clock icon
and “-:--:--” appears.
DVD-V
DVD-A
DivX
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
PAUSE
1. Press PAUSE/STEP(X) during playback.
2. To return to playback, press PLAY(2).
4. Press MEMORY/ENTER to confirm. Playback
starts from the selected time.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE AUDIO LANGUAGE
Special DVD Features
DVD-V
DVD-A
DivX
CHECKING THE CONTENTS OF DVD
DISCS: MENUS
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
b B v V buttons to highlight your selection.
Then press MEMORY/ENTER.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
DVD-V
DivX
SUBTITLES
DVD-V
DVD-A
TITLE MENU
Press SUBTITLE repeatedly during playback to see
the different subtitle languages.
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
Note:
• The subtitle file of the DivX file is displayed only
smi, srt and sub.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and
chapters for the title.
• If there is no information or there is a code that can not
read in the DivX file, “ 1 ” etc are displayed.
3. Press TITLE to exit.
DVD-V
DVD-A
DISC MENU
Press DISC MENU and the disc menu is displayed.
Press DISC MENU again to exit.
DVD-V
DVD-A
CAMERA ANGLE
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Tip:
The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle
switching is possible.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Audio Discs
Moving to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
1. Press DISPLAY during playback on in stop mode.
2. Press 3/4to select Group icon.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your Combi Receiver — it is a
function of the disc.
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multi-
channel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Note:
To enjoy maximum sound quality and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the Combi
Receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though
you’re playing a DVD Audio disc.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
2. Press 3/4to select Page icon.
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA
Disc
The Home Theater System can play MP3/WMA
formatted recordings on CD-ROM, CD-R, or CD-RW
discs.
MP3 / WMA disc compatibility with this receiver
is limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
Audio CD
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY (2) or MEMORY/ENTER and playback starts.
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
AUDIO CD
0:52:07
1 / 12
List
Program
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
Clear All
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as /
? * : “ < > l etc.
• The total number of files on the disc should be
less than 650.
PROGRAM Edit
MP3/WMA
1. Press v / V to select a folder, and press ENTER
to see the folder contents.
2. Press v / V to select a track then press PLAY (2)
or MEMORY/ENTER and playback starts.
This Home Theater System requires discs and
recordings to meet certain technical standards in
order to achieve optimal playback quality. Pre-
recorded DVDs are automatically set to these
standards. There are many different types of
recordable disc formats (including CD-R containing
MP3 or WMA files) and these require certain pre-
existing conditions (see above) to ensure
compatible playback.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Clear All
DISPLAY Info
PROGRAM Edit
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
ID3 TAG
• When playing a file containing information such as track
titles, you can see the information by pressing DISPLAY.
[ Title, Artist, Album, Year, Comment ]
• If there is no information, “NO ID3 TAG” appear on the
display.
Tip:
• If you are in a file list on the MUSIC menu and want to
return to the Folder list, use the v / V to highlight
press MEMORY/ENTER.
and
• Press MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Audio CD and MP3 / WMA Disc
Features
REPEAT A-B
1. To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and “A” appear on the menu screen.
CD
MP3
WMA
PAUSE
2. Press A-B again at your chosen end point. The
Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.
1. Press PAUSE/STEP(X) during playback.
2. To return to playback, press PLAY (2) ,
MEMORY/ENTER or press PAUSE/STEP(X)
again.
3. To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the menu screen.
CD
MOVING TO ANOTHER TRACK
MP3
WMA
CD
3D SURROUND
1. Press PLAY (2) briefly during playback to go to the
next track or to return to the beginning of the
current track.
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
2. Press BACKWARD . twice briefly to go back to
the previous track.
1. Press AUDIO during playback.
“3D SURR.” appears on the menu screen.
3. You can play any track by inputting its number.
2. To return to normal playback, press AUDIO
repeatedly until “3D SURR.” disappears from the
menu screen.
CD
MP3
REPEAT TRACK/ALL/OFF
WMA
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The repeat
icon appears.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Note:
If you press FORWARD > once during Repeat Track
playback, the repeat playback cancels.
CD
MP3
WMA
SEARCH
1. Press and hold BACKWARD . or FORWARD
> for about two seconds during playback.
2. Press and hold BACKWARD . or FORWARD
> repeatedly to select the required speed: X2,
X4, X8 backward or forward.
3. To exit SEARCH mode, press PLAY (2).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
REPEAT PROGRAMMED TRACKS
Programmed Playback
1. Press REPEAT when playing a disc. The repeat
icon appears.
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 30 tracks.
2. Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
1. Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
Note:
If you press FORWARD > once during Repeat Track
playback, the repeat playback cancels.
2. Press PROGRAM.
E
The mark will appear to the right of the word
“Program” on the right side of the menu screen.
Note:
ERASING A TRACK FROM “PROGRAM”
LIST
E
Press PROGRAM again, then the
to exit the Program Edit mode.
AUDIO CD
mark will disappear
1. Use v V B to select the track that you wish to
erase from the Program list.
MUSIC
0:00:00
0:52:07
1
/
12
1
/
12
List
List
E
E
Program
Track5
Program
2-Music2
Track1
Track2
Track3
Track4
Track5
Track7
Track4
Track1
4-Music4
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
6-Music6
1-Music1
2. Press CLEAR. Repeat to erase additional tracks
on the list.
Track6
Track7
Track8
Clear All
Clear All
PROGRAM Edit
DISPLAY Info
PROGRAM Edit
ERASING THE COMPLETE PROGRAM
LIST
Audio CD Menu
MP3/WMA Menu
1. Press B to move to the “Program” list.
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
2. Use v / V to select “Clear All”, then press
MEMORY/ENTER.
4. Press B.
Note:
The programs are also cleared when the disc is removed.
Select the track you want to start playing on the
“Program” list.
5. Press PLAY (2) or MEMORY/ENTER to start.
Playback begins in the order in which you
programmed the tracks. Playback stops after all of
the tracks on the “Program” list have played once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press PLAY (2).
42
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
Viewing a JPEG Disc
ZOOM
Use zoom to enlarge the photo image.
(see page 37)
Using this Home Theater System you can view discs
with JPEG files.
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
JPEG
TO ROTATE PICTURE
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
PHOTO
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
TO LISTEN TO MP3/WMA MUSIC
JPEG
WATCHING PICTURE
You can display files while listening to MP3/WMA
music files recorded on the same disc.
1. Insert the disc containing the two types of file in
the player.
2. Press v / V to select a folder, and press
MEMORY/ENTER. A list of files in the folder
appears. If you are in a file list and want to return
to the previous Folder list, use the v / V buttons
2. Press TITLE to display PHOTO menu.
3. Press v / V to select a photo file.
on the remote to highlight
MEMORY/ENTER.
and press
4. Use B to select
ENTER.
icon then press MEMORY/
Playback starts. The playback will continue until
STOP is pressed.
3. If you want to view a particular file, press
v / V to highlight a file and press
MEMORY/ENTER or PLAY (2). Viewing the file
proceeding starts.
While viewing a file, you can press STOP to move
to the previous menu (PHOTO menu).
Tip:
To listen to only the desired music watching picture,
programmed the desired tracks from the “MUSIC”
menu and then proceed as above.
Tips:
• Press MENU to move to the next page.
JPEG disc compatibility with this unit is limited
as follows:
• There are three Slide Speed options
>>> (Fast), >> (Normal), and > (Slow).
:
• Depending upon the size and number of JPEG
files, it could take a long time for the Home
Theater System to read the disc’s contents. If you
don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 2M pixels as 2760 x 2048 pixels and burn
another disc.
Use v V b B to highlight the Speed. Then, use b / B to
select the option you want to use then press
MEMORY/ENTER.
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
• Press RETURN, information of file is hidden.
JPEG
SLIDE SHOW
• The total number of files and folders on the disc
should be less than 650.
Use v V b B to highlight the
press MEMORY/ENTER.
(Slide Show) then
• Some discs may be incompatible due to a
different recording format or the condition of disc.
JPEG
STILL PICTURE
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
1. Press PAUSE/STEP(X) during slide show.
The player will now go into PAUSE mode.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
2. To return to the slide show, press PLAY (2) or
press PAUSE/STEP(X) again.
• File names without “.jpg” extension will not be
able to be read by this Home Theater System.
Even though the files are shown as JPEG image
files in Windows Explorer.
JPEG
MOVING TO ANOTHER FILE
Press BACKWARD . or FORWARD > or cursor
(b or B) once while viewing a picture to advance to
the next or previous file.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
Maintenance and Service
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-recorder.
Refer to the information in this chapter before
contacting a service technician.
HANDLING THE UNIT
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray. The DVD-VR
menu appears on the TV screen.
DVD-VR
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
2. Press v / V to select a track then press PLAY (2)
or MEMORY/ENTER and playback starts.
Cleaning the unit
Notes:
• Unfinalized DVD-R/RW discs cannot be played in this
player.
To clean the receiver, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
• Some DVD-VR disc are made with CPRM data by DVD
RECORDER. Player does not support these kinds of discs
and display the “CHECK DISC”.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system)
only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
This player is CPRM compatible, which means that you
can record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can only be made on DVD-RW discs formatted in VR
mode, and CPRM recordings can only be played on
Maintaining the Unit
The Combi Receiveris a high-tech, precision device. If
the optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
players that are specifically compatible with CPRM.
For details, please contact your nearest authorized
service center.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie Disc
DivX disc compatibility with this player is limited
as follows:
Using this Home Theater System you can play DivX
disc.
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a disc and close the tray. The MOVIE menu
appears on the TV screen.
• The file name of the DivX subtitle is available by
56 characters.
MOVIE
0:00:00
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
List
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
Movie Folder 8
• If the number of the screen frame is over 30
per 1 second, this unit may not operate
normally.
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
2. Press v / V to select a folder, and press
MEMORY/ENTER. A list of files in the folder
appears. If you are in a file list and want to return
to the Folder list, use the v / V buttons on the
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
GMC?
remote to highlight
MEMORY/ENTER.
and press
*
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
3. If you want to view a particular file, press
v / V to highlight a file and press
MEMORY/ENTER or PLAY (2).
4. Press STOP to exit.
Playable DivX file
Tips:
• Press DISC MENU to move to the next page.
z ".avi ", ".mpg ", ".mpeg "
Playable Codec format
• On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
is highlighted.
Playable Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Speaker Setup
This chapter includes important reference information
to help you set your Home Theater System.
Distance
If you connected speakers to your Home Theater
System, setting the Distance lets the speakers know
how far the sound has to travel to reach your set
listening point. This allows the sound from each
speaker to reach the listener at the same time.
Press b / B to adjust the Distance of the selected
speaker.
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press SETUP. The setup menu appears.
[0.3(1)m(ft) - 6.0(20)m(ft)]
2. Use v / V to select the AUDIO option then press
B to move to the second level.
Test
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
3. Use v / V to select the Speaker Setup option then
press B to move to the third level. “Select” is
highlighted.
Front Left (L) → Center → Front Right (R) →
Rear Right (R) → Rear Left (L) → SubWoofer
4. Press MEMORY/ENTER and 5.1 Speaker Setup
menu appears.
You can adjust the volume during operating the test
tone, first use v / V to select Volume or Speaker
option then use b / B buttons to select volume or
speaker, so that all speaker’s volume is same from
the listener’s position.
During operating the test tone, if you adjust the
volume, it will be paused in the current speaker
channel.
AUDIO
Speaker
Front L
Size
Volume
Distance
Test
Small
0
dB
m(ft)
0.6(2)
Off
Select
Move
Return
Enter
5. Use b / B to select the desired speaker.
6. Adjust options using v / V / b / B buttons.
7. Press ENTER to confirm your selection. Returns to
the previous menu.
Speaker selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Size
Since the speaker settings are fixed, you cannot
change the settings.
Volume
Press b / B to adjust the output level of the selected
speaker. (-6dB ~ +6dB)
46
Download from Www.Somanuals.com. All Manuals Search And Download.
XTS (EXCELLENT TRUE SOUND)
Additional Features
SCREEN SAVER
You can enjoy the vivid stereophonic sound of the
digital original source without any signal distortion.
The screen saver appears when you leave the Home
Theater System in Stop mode for about five minutes.
If the Screen Saver is displayed for five minutes, the
Home Theater System automatically turns itself off.
Each time you press XTS during 2 channel mode,
the setting changes in the following order.
XTS- 1 → XTS- 2 → XTS- 3 → XTS OFF ...
Tips:
VIDEO MODE SETTING
ꢀ XTS- 1: When playing the movie with the weak
bass sound relatively to the general
music, it enforces the sense of sound at
woofer for you to satisfy with.
The video mode setting only works when the
Progressive Scan mode is set to “On” in the Setup
menu.
ꢀ XTS- 2: In the mode of 2 CH BYPASS, It creates
the high display effect by playing the
sound source via the rear speakers same
as the front speakers.
ꢀ XTS- 3: You can operate both XTS- 1 and XTS- 2
simultaneously and it can complement the
relative degrading of the sound pitch of the
woofer at the XTS- 2 mode.
• With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
• To change the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Note:
The XTS- 2 mode is temporarily disabled when changing
from 2.1 CH to 5.1 CH and it is enabled when changing it to
2.1 CH.
• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
• If you turn off the power, the video mode will be
back to initial state (MODE1).
Tip:
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO Operation
Presetting the Radio Stations
Listening to the Radio
You can preset 50 stations for FM and AM. Before
tuning, make sure that you have turned down the
volume.
Preset radio stations in the Combi Receiver memory
first (see “Presetting Radio Stations” on the left).
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
The last received station is tuned in.
2. Use 3/4 on the remote control repeatedly to
select the preset station you want.
- - - - - - - RADIO - - - - - - - 1/10
AM
AM 1720kHz
AM 600kHz
530kHz
Each time you press the button, the DVD/VCR Receiver
tunes in one preset station at a time.
AM 1400kHz
AM 1000kHz
3. Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or - on the
remote control repeatedly.
FM/AM
MEMORY/CLEAR
TUNING
2. Use 3/4 on the remote control to select the
desired Station.
To Clear the Stored Radio
Stations
If you select a blank column, R-SKIP appears in the
display window.
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
- - - - - - - RADIO - - - - - - - 2/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
- - - - - - - RADIO - - - - - - - 1/10
AM
AM 1720kHz
AM 600kHz
530kHz
FM/AM
TUNING
MEMORY/CLEAR
AM 1400kHz
AM 1000kHz
3. Press FM/AM on the remote control to select the
desired band.
FM/AM
MEMORY/CLEAR
TUNING
4. Hold down TUNING (4/3) on the remote control
for 1 or 2 seconds, and a station is searched for
automatically.
2. Use 3/4 on the remote control to select your
desired station.
- - - - - - - RADIO - - - - - - - 2/10
5. Press MEMORY/ENTER on the remote control.
The station is stored.
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AM
TUNING
MEMORY/CLEAR
6. Repeat steps 2 to 5 to store other stations.
3. Press CLEAR the remote control to clear the
stored radio station.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 0MHz
FM/AM
TUNING
Note:
While record or record pause mode, the CLEAR function
may not be operated.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning Stations Manually
Labeling Stations
You can enter a name of up to 5 characters for preset
stations. The names (for example, “ABCD”) appears
in the system’s Display window when a station is
selected.
Note that no more than one name can be entered for
each preset station.
1. Press FM/AM on the remote control until the
frequency band appears on the display and TV
screen.
2. Use FM/AM on the remote control to select the
desired band.
3. Use 4TUNING 3 on the front panel or press
1 and 2 on the remote control to tune in the
desired station.
1. Press 2 to move to the station name column.
- - - - - - - RADIO - - - - - - - 6/10
FOR YOUR REFERENCE
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
To turn the radio off
Press POWER to turn the Combi Receiver off or
select another function mode (DVD, VCR, L 1 or
L 2).
FM/AM
TUNING
MEMORY/CLEAR
2. Use the 3/4 buttons to select the character then
use the 1/2 buttons to shift to the next or previous
character.
Tuning Stations Automatically
Hold down 4TUNING 3 on the front panel for 1 or 2
seconds, and the next station is searched for
automatically.
3. Press MEMORY/ENTER to confirm the station
name.
4. Press MEMORY/ENTER on the remote control.
The station name is stored.
Note:
The search may not tune in or stop at a station with a
very weak signal.
Mute
1. Press MUTE to remove the sound.
You can mute your unit in order, for example, to
answer the telephone, “MUTE” indicator appears
in the display.
2. Press MUTE again to restore sound.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling your TV with the
Suppllied Remote
Code Numbers of Controllable
TVs
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08
You can control your TV using the buttons below.
16,33,37,44,45
70
AKAI
01
NEC
ANGLE
REPEAT
TITLE
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
PANASONIC
PHILCO
43
BELL & HOWELL
BROKSONIC
CANDLE
33
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
CM SKIP
SPEED
ZOOM
18,19
51
CCE
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
43
09
49,50,51,52,53,54,55
03,37,44
11,13
TV Control
Buttons
CORONADO
CROWN
09
09
16,17,23
01,03,37,44,69
16,17,23
08
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
REALISTIC
SAMPO
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC 03,10,11,13,37,44
SEARS
09,25,26,27,28,29
64
GRADIENTE
HITACHI
JC PENNEY
JVC
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62
SIGNATURE 2000
By pressing
You can
Turn the TV on or off.
KIOTE
SONY
TV POWER
KMC
09
SOUNDESIGN
SYLVANIA
51
KTV
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
46,47
CHANNEL(v / V) Scans up or down through
memorized channels.
LG (GOLDSTAR)
LODGENET
LOGIK
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
33
11
VOLUME +/–
TV INPUT
Adjust the volume of the TV.
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
Switch the TV’s input source
between the TV and other input
sources.
MAGNAVOX
69
08
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
MARANTZ
01,32
MUTE
Turns on or off TV sound.
MEMOREX
33
XR1000
MGA/MITSUBISHI
01,08,32,34
ZENITH
01, 02,33,59
Note:
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
Notes:
• Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
• If you enter a new code number, the code number
previously entered will be erased.
Controlling other TVs with the
Supplied Remote
• When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the appropriate code number again.
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
2. Release TV POWER button.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Bengali; Bangla
Bhutani
Bihari
Hebrew
Hindi
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Code
AF
AR
AU
AT
Country
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Code
ET
FJ
Country
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
MY
MV
MX
MC
MN
MA
NP
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
NL
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
PT
RO
El Salvador
LU
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall
outlet securely.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The power is on, but
the Home Theater
System does not work.
ꢀ The TV is not set to receive Combi
Receiver signal output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the Home Theater System appears on
the TV screen.
No picture.
ꢀ TV/VCR mode for Home Theater
System is set to TV.
ꢀ Press the TV/VCR button on the
remote control repeatedly to choose
VCR mode. TV indicator disappears
from the display window.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable securely.
ꢀ The connected TV power is turned off.
ꢀ Turn on the TV.
ꢀ The Digital Audio Output is set to the
wrong position.
ꢀ Set the Digital Audio Output to the
correct position, then turn on the
Home Theater System again by
pressing POWER.
No sound.
The playback picture is
poor.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Clean video heads.
ꢀ Tape heads are dirty.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use TRK/PRESET (v/V) for manual
tracking adjustment while tape is
playing.
The Home Theater
System does not start
playback.
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
ꢀ Insert a playable disc. (Check the disc
type, color system, and Regional
code.)
ꢀ An unplayable disc is inserted.
ꢀ The disc is placed upside down.
ꢀ The disc is not placed within the guide.
ꢀ The disc is dirty.
ꢀ
Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray
correctly inside the guide.
ꢀ Clean the disc.
The remote control
does not work properly.
ꢀ The remote control is not pointed at the
remote sensor of the Home Theater System.
ꢀ Point the remote control at the remote
sensor of the Home Theater System.
ꢀ The remote control is too far from the
Combi Receiver.
ꢀ Operate the remote control within 23
ft (7 m).
ꢀ There is an obstacle in the path of the
remote sensor of the Home Theater System.
ꢀ Remove the obstacle.
ꢀ The batteries in the remote control are
exhausted.
ꢀ Replace the batteries with new ones.
ꢀ This remote control uses the same
buttons for VCR and DVD functions
(ex. PLAY).
ꢀ When using a VCR tape, first press
the VCR button. When using a DVD,
first press the DVD button.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause
Correction
ꢀ Use CH. ADD/DEL. to restore
channels. See “Channel Selection”
on page 22.
Some channels are
skipped over when using
ꢀ Those channels were deleted with the
CH. ADD/DEL option.
TRK/PRESET (v/V
)
Picture and sound of
broadcasting channel are
weak or missing.
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
ꢀ Wrong TUNING BAND option is being
used.
ꢀ Try all TUNING BAND options. See
“Channel Selection” on page 22 for
details.
ꢀ Use INPUT to select LINE input
source (L 1 or L 2).
Camcorder image via
A/V input to Home
ꢀ Home Theater System SOURCE
SELECT is not set to L 1 or L 2.
Theater System is not
shown on TV screen.
ꢀ Set clock to correct time. See
“Setting the Clock” on page 23.
Timer recording is not
possible.
ꢀ Clock in Home Theater System is not
set to correct time.
ꢀ Reprogram Timer. See “Timer
Recording” on pages 30 and 31.
ꢀ Timer has been programmed
incorrectly.
ꢀ Reprogram Timer.
ꢀ
indicator does not appear after
programming timer.
ꢀ This is the normal indication that the
Home Theater System is in TIMER
mode.
indicator appears
after Home Theater
System is turned off.
ꢀ Home Theater System is in Timer
Recording mode.
Stereo Audio Record
and/or Playback is not
present.
ꢀ TV is not Stereo-compatible.
ꢀ No action is possible.
ꢀ Broadcast program is not in stereo
format.
ꢀ No action is possible.
ꢀ Home Theater System BROADCAST
TYPE mode is set to SAP or MONO.
ꢀ Set BROADCAST TYPE mode to
STEREO. See “Setting the VCR
Setup Menu” on page 22.
Moisture Condensation
Moisture condensation can occur:
In locations where moisture condensation may occur:
• When the Home Theater System is moved from a
cold place to a warm place.
•
Keep the Home Theater System plugged into an AC
power outlet with POWER On. This will help prevent
condensation.
• Under extremely humid conditions.
• When condensation has occurred, wait a few hours
for the Home Theater System to dry before using it.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120V, 60 Hz
145W
430 X 90 X 350 mm (16.9 x 3.5 x 13.8 inches) (w x h x d)
8 kg (17.6 lbs)
5˚C to 35˚C
5 % to 90 %
NTSC
Power consumption
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
Antenna or CATV input, 75 ohms
1 Vp-p 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
MONITOR OUT
S-VIDEO OUT
1 Vp-p 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 ohms
Component Video output
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1
VCR Specifications
Head system
Timer
Tape speed
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Tape width
Maximum recording time
Rewind time
Antenna
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
75 ohms (VHF/UHF)
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
Channel 3 or 4
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
200Hz to 8kHz
More than 65 dB (EE mode)
More than 70 dB (EE mode)
More than 45 dB (EE mode)
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 20 Hz to 44 kHz, DVD (PCM 48 kHz): 20 Hz to 22
kHz
CD: 20 Hz to 18 kHz
More than 70 dB
Less than 0.5 %
More than 65 dB (DVD/CD)
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Tuner section
System
Tuning range
PLL quartz-locked digital synthesizer system
87.5 ~ 108.0 MHz (FM)
520 ~ 1720 KHz (AM)
Antenna
Wire antenna (FM)
Loop antenna (AM)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
LH-EC950SB NA1ULLS
Amplifier
Stereo mode
180W + 180W (4Ω at 1 kHz, THD 10 %)
Front: 180W + 180W (THD 10 %)
Center*: 180W
Surround*: 180W + 180W (4Ω at 1 kHz, THD 10 %)
Subwoofer*: 300W (3Ω at 30 Hz, THD 10 %)
Wire antenna (FM)
Surround mode
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Antenna
Loop antenna (AM)
Speakers
Satellite (LHS-95SBS)
Type
Impedance
1 Way 1 Speaker
4 Ω
Frequency Response
Sound Pressure Level
Max Input Power
Net Dimensions (W x H x D)
Net Weight
110 - 20,000 Hz
83 dB/W (1m)
180W
140 x 222 x 153 mm
0.95 kg
Center (LHS-95SBC)
Type
Impedance
1 Way 1 Speaker
4 Ω
Frequency Response
Sound Pressure Level
Max Input Power
Net Dimensions (W x H x D)
Net Weight
110 - 20,000 Hz
83 dB/W (1m)
180W
300 x 116 x 91 mm
1.0 kg
Subwoofer (LHS-95SBW)
Type
Impedance
1 Way 1 Speaker
3 Ω
Frequency Response
Sound Pressure Level
Max Input Power
Net Dimensions (W x H x D)
Net Weight
40 - 1,500 Hz
82 dB/W (1m)
300W
180 x 400 x 355 mm
5.6 kg
Accessories:
Video cable x 1, Audio cable x 1, RF 75-ohm Coaxial Cable x 1, Speaker cable x 6,
FM Antenna cable x 1, AM Antenna cable x 1, Remote control x 1, Batteries (AAA) x 2
ꢀ Design and specifications are subject to change without prior notice.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Combi Receiver -LHX-557
Limited Warranty - USA
This LG Electronics product, marketed by Zenith, will be repaired or replaced, at LG’s option, if it proves to be
defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below,
effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good
only to the original purchaser of the product and effective only when used in the United States, excluding U.S.
Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the first 90
days of the Warranty Period. During the remainder of the
Warranty Period (91-365 days), you pay inbound shipping
charges and LG pays return shipping charges.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER
DAMAGE WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may
not apply to you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
z Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
z Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG Electronics U.S.A., Inc.
1000 Sylvan Avenue, Englewood Cliffs, NJ.
GS# 3834RH0075E
Printed in Indonesia
Issue O
Download from Www.Somanuals.com. All Manuals Search And Download.
|