OWNER’S MANUAL
LCD MONITOR
Please read this manual carefully before operating your set and
retain it for future reference.
LCD MONITOR MODEL
IPS226V
IPS236V
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of this
manual or listed on the display. If you are not sure what type of power supply you
have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your
service technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the
display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen sink,
laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
For displays with glossy bezels the user should consider the placement of the display
asthe bezel may cause disturbing reflections from surrounding light and bright surfaces.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or other
liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
15-pin D-Sub Signal Cable
User's Guide/Cards
(To set it up, this signal cable may
be attached to this product before
shipping out.)
Or
AC-DC adapter
Power Cord
AC-DC adapter
(Depending on the country)
(Depending on the country)
DVI-D Signal Cable
(This feature is not available in
all countries.)
Screws
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting and Disassembling the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Use a coin on the back of the stand base and turn the screw clockwise to tighten.
3. Once assembled take the monitor up carefully and face the front side
.
4. When you desire to disintegrate the monitor from the stand base, use a coin to turn the
screw counterclockwise.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
After installation, adjust the angle as shown below.
* With stand base
Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -5˚ to 15˚
Do not touch or press the screen when
adjusting the angle of the monitor.
When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Connecting with the PC
1. Before setting up the monitor, ensure that the power to the monitor, the computer
2. sCyosntenmec, tasnidgnoathleinrpautttaccahbedledeviceasnids ptuorwneedr ocoff.rd
in order, then tighten the screw
1
2
of the signal cable.
A
Connect DVI-D(Digital signal) Cable
B
C
Connect D-sub(Analog signal) Cable
Connect HDMI Cable
Connect the signal
input cable and tighten
it up by turning in the
direction of the arrow
as shown in the figure.
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
Headphone/Earphone Input
* HDMI is optimized on the AV equipment.
* Not supported PC
Wall-outlet type
OR
When using a D-Sub signal input cable connector
for Macintosh
Mac adapter : For Apple Macintosh use, a
separate plug adapter is needed to change the
15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2
row connector.
Wall-outlet type
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may
differ from the view as shown.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Display
Connecting with the PC
3. Press the power button on the front panel to turn the power on. When monitor power is
turned on, the 'Self Image Setting Function' is executed automatically.
(Only Analog Mode)
Power Button
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO function button to improve resolution.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
Front Panel Controls
MENU Button
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
SMART+ Button
MODE Button
Use this button to enter ORIGINAL RATIO, DUAL
WEB,CINEMA MODE menus.
For more information, refer to page 19~20.
For more information, refer to page 21~22.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Functions
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
IPS226V/IPS236V : 1920 x 1080
Use this button to select source from input.
INPUT Button
(SOURCE Hot key)
When two input signals at least are connected, you can
select the input signal (D-SUB/DVI/HDMI) you want. When
only one signal is connected, it is automatically detected.
The default setting is D-Sub.
EXIT Button
Exit the OSD(On Screen Display).
Use this button to turn the display on or off.
Power Button &
Power Indicator
The power indicator stays blue if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking blue.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Press the discretionary Button, then the main menu of the OSD appears.
1
To access a control, use the corresponding Buttons.
2
Use the
Use the
/
Buttons to adjust the image to the desired level.
3
4
Button to select other sub-menu items.
Press the EXIT Button to exit from the OSD.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
: D-SUB(Analog signal) input
: DVI-D(Digital signal) input
DSUB
DVI-D
HDMI : HDMI input
Main menu
PICTURE
Sub-menu
BRIGHTNESS
Supported signals
Description
DSUB
DVI-D
HDMI
Standard image settings.
CONTRAST
SHARPNESS
HDMI
BLACK LEVEL
COLOR TEMP
COLOR
DSUB
DVI-D
HDMI
Color temperature adjustments.
(PRESET)
WARM
(USER)
SIX COLOR
(RED/GREEN/
BLUE/CYAN/
MAGENTA/
YELLOW)
MEDIUM
COOL
HUE
SATURATION
RED
GREEN
BLUE
GAMMA
COLOR RESET
HORIZONTAL
VERTICAL
To adjust the position of the
screen
DISPLAY
DSUB
DSUB
CLOCK
PHASE
To improve the clarity and
stability of the screen
OVERSCAN
HDMI
HDMI
VOLUME
OTHERS
To adjust the volume
LANGUAGE
POWER INDICATOR
DSUB
DVI-D
HDMI
To customize the screen status
for a user's operating
environment
DSUB
WHITE BALANCE
FACTORY RESET
DSUB
DVI-D
HDMI
12
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub-menu
Supported input
Description
DSUB
DVI-D
HDMI
ORIGINAL RATIO
SMART+
To adjust the image size
DUAL WEB
DSUB
DVI-D
CINEMA MODE
USER
DSUB
DVI-D
HDMI
It is a mode that the user can
adjust each element. It can adjust
the color mode of the Main Menu.
MODE
MOVIE
TEXT
It is a mode that the screen is
adjusted to the best to view the
videos.
It is a mode that the screen is
adjusted to the best for the text
works.
It is a mode that the screen is
adjusted to the best to view
pictures.
PHOTO
sRGB
It is a mode that the screen is
adjusted to the standard sRGB.
NOTE
The order of icons may differ depending on the model (12~22).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Menu Name
Sub-
menus
Icons
Button
Tip
Exit
Adjust (Decrease/Increase)
Select another sub-menu
Restart to select sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
To adjust the brightness of the screen.
To adjust the contrast of the screen.
To adjust the clearness of the screen.
BRIGHTNESS
CONTRAST
SHARPNESS
BLACK LEVEL
You can set the offset level. If you select
'HIGH', the screen will be bright and if you
select ‘LOW’, the screen will be dark.
(only for HDMI input)
Exit : Exit
* Offset? As the criteria for video signal, it
is the darkest screen the monitor can
show.
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
15
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
COLOR TEMP
PRESET
Description
PRESET Mode
Select either PRESET or USER to
adjust the screen color.
Select the preset color temperature.
WARM: Yellow screen color.
MEDIUM: Red screen color.
COOL: Blue screen color.
USER
SIX COLOR
USER Mode
Sets and stores the hue and saturation
for six colors(RED/GREEN/BLUE/CYA
N/MAGENTA/YELLOW) to satisfy the
color requirements of a user.
HUE
Adjusts the screen hue.
SATURATION
Adjusts the color sharpness on the
screen. Lower values make the color
sharpness weaker and colors lighter
while higher values make the color
sharpness stronger and colors darker.
RED
Set your own red color levels.
GREEN
Set your own green color levels.
BLUE
Set your own blue color levels.
Set your own gamma value. :
1.8/2.0/2.2/2.4/2.6
GAMMA
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
COLOR
RESET
Resets the color settings to the factory
default settings for the current input
device.
Exit : Exit
: Decrease
: Increase
: Select another sub-menu
: Restart to select sub-menu
16
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
HORIZONTAL
To move image left and right.
To move image up and down.
VERTICAL
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
Exit : Exit
: Decrease
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
: Increase
: Select another sub-menu
: Restart to select sub-menu
OVERSCAN
To select the range of output image
for DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to
turn on when connect AV equipment.
VOLUME
To adjust the volume of headphone/
Earphone.
(Only for HDMI input)
Exit : Exit
: Decrease
: Increase
: Mute
: Restart to select sub-menu
17
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
To choose the language in which the
control names are displayed.
LANGUAGE
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
POWER
INDICATOR
If you set OFF, it will be turned off.
If you set ON at any time, the power
indicator will automatically be turned on.
Exit : Exit
: Decrease
WHITE
BALANCE
If the output of the video card is
different the required specifications,
the color level may deteriorate due
to video signal distortion. Using this
function, the signal level is adjusted
to fit into the standard output level of
the video card in order to provide the
optimal image.
: Increase
: Select another sub-menu
: Restart to select sub-menu
Activate this function when white
and black colors are present in the
screen.
Restore all factory default settings except
FACTORY
RESET
"LANGUAGE."
Press the
,
buttons to reset
immediately.
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
WHITE BALANCE function again. This function will be enabled only when the input signal is an analog
signal.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the SMART+ Button, then the main menu of the OSD appears.
Menu Name
Sub-
menus
Icons
Button
Tip
Exit
Move
Restart to select sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
Switch to full screen mode according to input
image signal.
*This function works only if input resolution is
lower than monitor ratio (16:9).
* Before using below functions, please install Easy Set Package programme.
Help user to browse web efficiently by dividing in half.
Help to arrange and move windows on screen.
Help user to control divided windows ratio.
Make the eye comfortable by reducing the
background brightness in the web page.
Exit : Exit
,
: Move
: Restart to select sub-menu
20
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MODE Button, then the main menu of the OSD appears.
Menu Name
Sub-
menus
Icons
Button
Tip
Exit
Move
Restart to select sub-menu
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
USER
It is a mode that the user can adjust
each element. It can adjust the color
mode of the Main Menu.
MOVIE
TEXT
It is a mode that the screen is adjusted
to the best to view the videos.
It is a mode that the screen is adjusted
to the best for the text works.
It is a mode that the screen is adjusted
to the best to view pictures.
PHOTO
sRGB
It is a mode that the screen is adjusted
to the standard sRGB.
Exit : Exit
: Move
: Select another sub-menu
,
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following before calling for service.
No image appears
G Is the power cord of the
•
•
Check and see if the power cord is connected
properly to the power outlet.
display connected?
G Is the power indicator
Press the Power button.
light on?
G Is the power indicator
•
If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
flickering?
• Try to turn on the PC
.
G Do you see an "OUT OF
RANGE" message on
the screen?
•
•
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
G Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
Do you see a "OSD LOCKED" message on the screen?
G
Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
G Display Position is
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
incorrect.
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
G On the screen
background, vertical
bars or stripes are
visible.
•
•
Press the AUTO button to automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
G Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select
the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display image is incorrect
G The screen color is
•
•
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
mono or abnormal.
G The screen blinks.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA
DDC) monitor found" message?
G
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
•
Make sure to check if the video card supports
Plug&Play function.
The Audio function is not working
G
Picture OK & No sound.
• Check whether volume is "0".
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
IPS226V
54.6 cm (21.5 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 54.6 cm
0.248 x 0.248 mm (Pixel pitch)
Display
Horizontal Freq.
Vertical Freq.
30 kHz to 83 kHz (Automatic)
Sync Input
Video Input
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync.
Input Form
Digital
Signal Input
Input Form
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Max
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Resolution
Plug&Play
Recommend
DDC 2B (Analog,Digital,HDMI)
:
≤
≤
35 W(Typ.)
0.5 W
0.5 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 51.48 cm (20.27 inch)
Height 40.30 cm (15.87 inch)
Depth 23.00 cm ( 9.06 inch)
Width 51.48 cm (20.27 inch)
Height 33.22 cm (13.08 inch)
Depth 4.04 cm ( 1.59 inch)
Weight(excl. packing)
3.4 kg (7.50 lb)
Tilt : -5˚ to 15˚
Range
Power Input
19 V
2.0 A
Type PA-1650-68,manufactured by LITEON TECHNOLOGY CORP.
AC-DC Adapter
Operating Conditions
Environment
al Conditions
Temperature
Humidity
10 ˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20 ˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
IPS236V
58.4 cm (23.0 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size : 58.4 cm
0.265 x 0.265 mm (Pixel pitch)
Display
Horizontal Freq.
Vertical Freq.
30 kHz to 83 kHz (Automatic)
Sync Input
Video Input
Analog,Digital : 56 Hz to 75 Hz (Automatic)
HDMI : 56 Hz to 61 Hz (Automatic)
Separate Sync.
Input Form
Digital
Signal Input
Input Form
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Max
VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Resolution
Plug&Play
Recommend
DDC 2B (Analog,Digital,HDMI)
:
≤
≤
36 W(Typ.)
0.5 W
0.5 W
On Mode
Power
Consumption
Sleep Mode
Off Mode
With Stand
Without Stand
Dimensions
& Weight
Width 54.87 cm (21.60 inch)
Height 42.19 cm (16.61 inch)
Depth 23.00 cm ( 9.06 inch)
Width 54.87 cm (21.60 inch)
Height 35.04 cm (13.80 inch)
Depth 3.90 cm ( 1.54 inch)
Weight(excl. packing)
3.9 kg (8.77 lb)
Tilt : -5˚ to 15˚
Range
19 V
2.0 A
Power Input
AC-DC Adapter
Type PA-1650-68,manufactured by LITEON TECHNOLOGY CORP.
Operating Conditions
Environment
al Conditions
Temperature
Humidity
10 ˚C to 35 ˚C
10 % to 80 % non-Condensing
Storage Conditions
Temperature
Humidity
-20 ˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Preset Modes (Resolution)
DSUB/DVI Timing
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
720 x 400
640 x 480
70
60
75
60
75
60
75
75
60
75
60
60
3
640 x 480
4
800 x 600
800 x 600
5
6
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
7
8
9
10
11
*12
* Recommend Mode
HDMI Timing
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
480P
576P
720P
720P
1080i
1080i
1080P
1080P
60
50
50
60
50
60
50
60
Indicator
LED Color
MODE
On Mode
Sleep Mode
Off Mode
Blue
Blue Blinking
Off
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate
or the interchange device.
1. Place the monitor face down on the soft cloth.
2. When you desire to disintegrate the monitor from the stand base, use a coin to turn the
screw counterclockwise.
3. Pull out the Stand Base to remove.
4. Remove the Stand Body.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Wall mount plate
5. Install the Wall mount plate.
Wall mount plate(Separate purchase)
This is stand-type or wall mount type and is
connectable with Wall mount plate.
Please refer to the installation guide for more details,
which is provided when Wall mount plate is
purchased.
Wall Mount pad
Kensington Security Slot
Connected to a locking cable that
can be purchased separately at
most computer stores.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
ENERGY STAR is a set of power-saving
guidelines issued by the U.S.Environmental
Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc.
has determined that this product meets the
ENERGY STAR guidelines for energy efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
|