LG Electronics Computer Monitor 38WR50MS User Manual

OWNER’S MANUAL  
MONITOR SIGNAGE  
Please read this manual carefully before operating your set and retain it  
for future reference.  
MONITOR SIGNAGE MODELS  
38WR50MS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
3
58 CONTROLLING THE MULTIPLE  
PRODUCT  
58  
58  
58  
59  
61  
Connecting the cable  
RS-232C Configurations  
Communication Parameter  
Command reference list  
Transmission / Receiving protocol  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
LICENSES  
LICENSES  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks  
or registered trademarks of HDMI Licensing LLC.  
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a  
subsidiary of Rovi Corporation. This is an official DivX Certified device that  
plays DivX video. Visit divx.com for more information and software tools to  
convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX  
Certified device must be registered in order to play purchased DivX Video-  
on-Demand (VOD) movies. To obtain your registration code, locate the  
DivX VOD section in your device setup menu. Go to vod.divx.com for more  
information on how to complete your registration.  
DivX Certified to play DivX video up to HD 1080p, including premium  
content.  
DivX , DivX Certified and associated logos are trademarks of Rovi  
Corporation or its subsidiaries and are used under license.  
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;  
7,515,710; 7,519,274  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby Laboratories.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
5
ASSEMBLING AND PREPARING  
Accessories  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual product  
and accessories.  
POWER  
MONITOR  
ON  
OFF  
ENERGY INPUT  
SAVING  
.
,
!
ABC  
JKL  
TUV  
DEF  
GHI  
MNO  
WXYZ  
PQRS  
1/a/A  
CLEAR  
-
*
#
MARK  
ARC  
Power Cord  
RGB Cable  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
S.MENU  
MENU  
OK  
BACK  
TILE  
EXIT  
ID  
ON  
OFF  
CD (Owner's Manual,  
SuperSign Elite-w Program/  
SuperSign Manual) / Card  
IR Receiver  
Remote Control  
and Batteries  
CAUTION  
Do not use any pirated items to ensure the safety and product life span.  
yy  
Any damages or injuries by using pirated items are not covered by the warranty.  
yy  
NOTE  
The accessories supplied with your product may vary depending on the model.  
yy  
Product specifications or contents in this manual may be changed without prior notice due to upgrade  
yy  
of product functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
ASSEMBLING AND PREPARING  
Parts  
Power Indicator  
LED On : Power is on  
yy  
LED Off: Power is off  
yy  
Screen Marks  
Screen Buttons  
Connection panel  
Screen Marks  
INPUT  
Description  
Changes the input source.  
MENU  
Accesses the main menus, or saves your input and exits the menus.  
Adjust the up and down.  
Adjusts the volume level.  
AUTO/SET  
Displays the current signal and mode.  
Press this button to adjust the screen automatically (available only in RGB mode)  
Turns the power on or off.  
Power Indicator  
This Indicator lights up red when the display operates normally(on mode). If the display  
In sleep mode (In Power Saving mode), this indicator color changes to amber.  
NOTE  
You can set the Power indicator to on or off by selecting OPTION in the main menu.  
yy  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
7
Storage Method for Panel Protection  
Correct Method  
Incorrect Method  
Panel  
Panel  
If the product needs to be set upright, hold both  
sides of the product, and tilt backward carefully  
for. Do not let the panel not to touch the floor.  
If the product is tilted onto the bezel, the bottom of  
the panel may be damaged.  
Panel  
Cushion  
Panel  
When laying down the product, lay a cushion on a  
flat floor. Put the product on it with the panel of  
the product facing down.  
Panel  
If the product is tilted onto the edge of the panel,  
the panel may be damaged.  
If there is not a cushion available, ensure the floor is  
clean and then lay the product down carefully with the  
panel facing either upward or downward. At this time,  
be careful for objects not to fall on the panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
ASSEMBLING AND PREPARING  
Installing on a wall  
CAUTION  
Disconnect the power cord first, and then  
yy  
move or install the Monitor set. Otherwise  
electric shock may occur.  
To install the Monitor on a wall(Optional), use the  
VESA screws(not included) to fasten it.  
If you install the Monitor set on a ceiling or  
yy  
slanted wall, it may fall and result in severe  
injury.  
Do not over tighten the screws as this may  
yy  
cause damage to the Monitor set and void  
your warranty.  
10 cm  
20 cm  
Use the screws and wall mounts that  
yy  
10 cm  
10 cm  
meet the VESA standard. Any damages  
or injuries by misuse or using an improper  
accessory are not covered by the warranty.  
10 cm  
Install the monitor at least 10 cm away from the  
wall and leave about 10 cm of space at each side  
of the monitor to ensure sufficient ventilation.  
Use the wall mount plate and screws that comply  
with the VESA standard.  
NOTE  
Do not install the product in a place with  
no ventilation (e.g., on a bookshelf or in a  
closet) or on a carpet or cushion. If there is  
no other option but to mount the product on  
the wall, make sure that sufficient ventilation  
is provided before installation.  
- Failure to do so may result in a fire due to  
the increase in the internal temperature.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
9
EXTERNAL EQUIPMENT SETUP  
IR RECEIVER  
This allows a remote control sensor to be placed in a custom location. Then that display can control other  
displays via an RS-232C cable.  
GB OUT AUDIO IN LAN  
GB IN REMOTE  
S
S
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 REMOTE CONTROL  
REMOTE CONTROL  
The descriptions in this manual are based on the buttons of the remote control. Please read this manual  
carefully and use the Monitor set correctly.  
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the  
label inside the compartment, and close the battery cover.  
To remove the batteries, perform the installation actions in reverse.  
CAUTION  
Do not mix old and new batteries, as this  
yy  
may damage the remote control.  
Make sure to point the remote control to the  
POWER  
yy  
MONITOR  
ENERGY INPUT  
SAVING  
ON  
OFF  
1
4
.
,
!
2
ABC  
JKL  
TUV  
3
6
9
DEF  
remote control sensor on the Monitor set.  
GHI  
5
8
0
MNO  
WXYZ  
7
PQRS  
1/a/A  
CLEAR  
-
*
#
MARK  
ARC  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
MENU  
S.MENU  
OK  
BACK  
TILE  
EXIT  
ID  
ON  
OFF  
(POWER)  
ENERGY SAVING(  
)
Turns the Monitor set on or off.  
Adjusts the brightness of  
the screen to reduce energy  
consumption.  
POWER  
Monitor On / Off  
Turn off the monitor and then  
turn it back on.  
INPUT  
Selects the input mode.  
MONITOR  
ENERGY INPUT  
SAVING  
OFF  
ON  
1/a/A Button  
Toggles between numerical  
and alphabetical.  
. , ! ABC DEF  
GHI JKL MNO  
Number and Alphabet buttons  
Enters numerical or alphabetical  
characters depending on the  
setting.  
ARC  
Selects the Aspect Ratio  
Mode.  
MARK  
Selects a specific file in the  
USB mode.  
ꢆ ꢇTUV WXYZ  
PQRS  
CLEAR  
Deletes the entered numerical  
or alphabetical character.  
1/a/A  
CLEAR  
- * #  
MARK  
ARC  
P
A
G
E
Volume Up / Down  
Adjusts the volume level.  
BRIGHT  
NESS  
PSM  
MUTE  
Brightness Key  
PSM  
Selects the Picture Status  
Mode.  
Adjust the brightness by  
pressing the Up and Down  
buttons on the remote control.  
In USB mode, the OSD menu  
has the Page function to  
move to the next file list.  
AUTO  
MENU  
MUTE  
Mutes all sounds.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL 11  
POWER  
MONITOR  
ON  
OFF  
ENERGY INPUT  
SAVING  
1
4
.
,
!
2
ABC  
JKL  
TUV  
3
6
9
DEF  
GHI  
5
8
0
MNO  
WXYZ  
7
PQRS  
1/a/A  
CLEAR  
-
*
#
MARK  
ARC  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
MENU  
S.MENU  
OK  
BACK  
TILE  
EXIT  
ID  
ON  
OFF  
Accesses the main menus  
or saves your input and exit  
menus.  
AUTO  
Automatically adjusts picture  
position and minimizes image  
instability.(RGB input only)  
Navigation buttons  
Scrolls through menus or  
options.  
NESS  
E
MUTE  
AUTO  
S.MENU  
MENU  
S.MENU  
OK  
Selects menus or options and  
confirms your input.  
(SuperSign Menu Key)  
This button selection is not  
applicable.  
OK  
BACK  
Allows the user to move back  
one step in user interaction  
function.  
EXIT  
BACK  
EXIT  
TILE  
Clears all on-screen displays  
and returns to Monitor set  
viewing from any menu.  
ID  
ON  
OFF  
TILE  
The current model does not  
support this function.  
ID ON/OFF  
When the number of Picture  
ID is equal to Set ID you can  
control the monitor which  
you want in the multi display  
condition.  
USB Menu control buttons  
Controls media playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 REMOTE CONTROL  
Displaying the device name connected to an input port  
Display which devices are connected to which  
external input ports.  
NOTE  
External inputs supported: HDMI, DVI-D,  
yy  
Display Port  
Labels available : DTV, PC  
yy  
1
Access the Input list screen and press the blue  
(input label) button on the remote control.  
The input labels are displayed on the Input  
yy  
Label screen or at the top left of the screen  
when you change the external input setting.  
For DTV/PC-compatible signals, such as  
yy  
1080p 60 Hz, the screen settings may  
change according to the input label. The Just  
Scan option is available if a PC is connected  
as an external device.  
BACK  
EXIT  
TILE  
OFF  
ID  
ON  
2
You can assign an input label for every input  
except USB.  
Input Label  
HDMI  
DVI-D  
Display Port  
Close  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MONITOR SET 13  
USING THE MONITOR SET  
RGB connection  
Connecting to a PC  
Transmits the analog video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the 15 pin signal cable as shown the  
following illustrations.  
Your Monitor set supports the Plug & Play* feature.  
* Plug & Play: A PC will have a built-in driver for  
the monitor, no extra software is needed.  
Select RGB input.  
Back of the product.  
NOTE  
It is recommended to use the Monitor set  
yy  
with the HDMI connection for the best image  
quality.  
To comply with the specifications of the  
yy  
product, use a shielded interface cable with  
ferrite core, such as D-sub 15 pin cable and  
DVI/HDMI cable provided with the product.  
Macintosh Adapter  
(not included)  
If you turn the Monitor set on when the set  
yy  
becomes cold, the screen may flicker. This is  
normal.  
(not included)  
Some red, green, or blue spots may appear  
yy  
on the screen. This is normal.  
PC/MAC  
PC  
CAUTION  
Connect the signal  
yy  
input cable and tighten  
it by turning the screws  
clockwise.  
NOTE  
Use the standard Macintosh  
yy  
adapter since an incompatible  
adapter is available in the  
market. (Different signaling  
system)  
Do not press the screen with your finger for  
yy  
a long time as this may result in temporary  
distortion on the screen.  
Avoid displaying a fixed image on the  
yy  
Apple computers may require an adapter to  
yy  
screen for a long period of time to prevent  
image burn. Use a screensaver if possible.  
connect to this monitor. Call or visit their web  
site for more information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
14 USING THE MONITOR SET  
DVI connection  
HDMI connection  
Transmits digital video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the DVI cable as shown the following  
illustrations.  
Transmits digital video and audio signals from your  
PC to the Monitor set. Connect the PC and the  
Monitor set with the HDMI cable as shown in the  
following illustrations.  
Select DVI input.  
Select HDMI input  
Back of the product.  
Back of the product.  
(not included)  
(not included)  
(not included)  
PC  
PC  
PC  
NOTE  
Use a High Speed HDMI™ Cable.  
yy  
Please check the PC environment if you  
yy  
cannot hear the sound in HDMI mode.  
Some PCs require you to manually change  
the default audio output to HDMI.  
If you want to use HDMI-PC mode, you  
yy  
must set the input label to PC mode.  
When HDMI PC is used, a compatiblity  
yy  
problem could occur.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
USING THE MONITOR SET 15  
Display Port connection  
IR Receiver connection  
Transmits digital video and audio signals from  
your PC to the Monitor. Connect the PC and the  
Monitor with the Display Port cable as shown in  
the following illustrations.  
Allows the use of a wired remote or IR receiver  
extension.  
Select Display Port input source.  
Back of the product.  
Back of the product.  
(not included)  
PC  
NOTE  
Sound may not be available depending on  
yy  
the DP version of your PC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
16 USING THE MONITOR SET  
Customizing image options  
Adjusting the screen  
Customize basic and advanced options of each  
image mode for the best screen performance.  
Selecting an image mode  
Display images in its optimized settings by  
selecting one of the preset image modes.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
Press the Navigation buttons to scroll to  
Picture Mode and press OK.  
3
4
5
Press the Navigation buttons to scroll to  
Picture Mode and press OK.  
3
4
Press the Navigation buttons to scroll to an  
image mode you want and press OK.  
Press the Navigation buttons to scroll to an  
image mode you want and press OK.  
Select and adjust following options, and then  
press OK.  
Option  
Description  
Mode  
Vivid  
Description  
Backlight  
Adjusts the brightness of the screen  
by controlling the LCD backlight. If  
you decrease the brightness level,  
the screen becomes darker and the  
power consumption will be reduced  
without any video signal loss.  
Adjusts the video image for the retail  
environment by enhancing the contrast,  
brightness, color, and sharpness.  
Standard  
Cinema  
Adjusts the image for the normal  
environment.  
Contrast  
Increases or decreases the gradient  
of the video signal. You may use  
Contrast when the bright part of the  
picture is saturated.  
Optimizes the video image for a cinematic  
look to enjoy movies as if you are in a  
movie theater.  
Sport  
Game  
Optimizes the video image for high and  
dynamic actions by emphasizing primary  
colors such as white, grass, or sky blue.  
Brightness  
Sharpness  
Adjusts the base level of the signal in  
the picture. You may use Brightness  
when the dark part of the picture is  
saturated.  
Optimizes the video image for a fast  
gaming screen such as PCs or games.  
Adjusts the level of crispness in the  
edges between the light and dark  
areas of the picture. The lower the  
level, the softer the image.  
When you are finished, press EXIT.  
Color  
Tint  
Adjusts intensity of all colors.  
5
Adjusts the balance between red and  
green levels.  
When you return to the previous menu, press  
BACK.  
Color Temp.  
Set to warm to enhance hotter Colors  
such as red, or set to cool to make  
picture bluish.  
Advanced  
Control  
Customizes the advanced options.  
Refer to the Advanced image options.  
Picture Reset Restores the options to the default  
setting.  
When you are finished, press EXIT.  
6
When you return to the previous menu, press  
BACK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MONITOR SET 17  
Customizing PC display options  
Adjusting the sound  
Customize options of each image mode for the  
best image quality.  
Selecting an sound mode  
Play the sound in its optimized settings by  
selecting one of the preset sound modes.  
This function works in the following mode:  
yy  
RGB[PC] mode.  
Press MENU to access the main menus.  
1
2
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
AUDIO and press OK.  
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
Press the Navigation buttons to scroll to Sound  
Mode and press OK.  
3
4
Press the Navigation buttons to scroll to  
Screen and press OK.  
3
4
Press the Navigation buttons to scroll to a  
sound mode you want and press OK.  
Select and adjust following options, and then  
press OK.  
Mode  
Description  
Option  
Description  
Standard  
Select when you want standard-quality  
sound.  
Resolution Selects a proper resolution. See  
“Customizing PC display options”.  
Music  
Cinema  
Sports  
Game  
Select when you listen to music.  
Select when you watch movies.  
Select when you watch sports events.  
Select when you play games.  
Auto  
Sets to adjust the screen position, clock,  
and phase automatically.  
Config.  
The displayed image may be unstable for  
a few seconds while the configuration is  
in progress.  
Position/  
Adjusts the options when the picture is  
When you are finished, press EXIT.  
5
Size/Phase not clear, especially when characters are  
shaky, after the auto configuration.  
When you return to the previous menu, press  
Reset  
Restores the options to the default  
setting.  
BACK.  
When you are finished, press EXIT.  
5
When you return to the previous menu, press  
BACK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 USING THE MONITOR SET  
Customizing sound options  
Using additional options  
Customize options of each sound mode for the  
best sound quality.  
Adjusting aspect ratio  
Resize the image to view the image at its optimal  
size by pressing ARC while you are watching  
Monitor set.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
AUDIO and press OK.  
Press the Navigation buttons to scroll to Sound  
Mode and press OK.  
3
4
5
CAUTION  
Press the Navigation buttons to scroll to a  
sound mode you want and press OK.  
If a fixed image displays on the screen for  
yy  
a long period of time, it could be imprinted  
and become a permanent disfigurement on  
the screen. This is “image burn” or “burn-in”  
and not covered by the warranty.  
Select and adjust following options, and then  
press OK.  
If the aspect ratio is set to 4:3 for a long  
yy  
period of time, image burn may occur on  
the letterboxed area of the screen.  
Option  
Infinite  
Description  
LG's Infinity Sound option provides 5.1  
channel stereo sound quality from two  
speakers.  
Sound  
Treble  
Bass  
Increases the intensity of the high  
frequency part of audio.  
NOTE  
Increases the intensity of the low  
frequency part of audio.  
You can also change the image size by  
accessing the main menus.  
Reset  
Resets the sound mode to the default  
setting.  
MODE RGB  
Display  
Port  
DVI-D  
HDMI  
ARC  
PC  
o
DTV PC  
PC  
o
DTV PC  
16:4  
o
o
x
o
o
o
x
o
o
o
o
o
x
o
o
o
x
o
o
o
Just Scan  
1:1  
x
x
When you are finished, press EXIT.  
6
o
o
When you return to the previous menu, press  
4:3  
o
o
BACK.  
TOP  
o
o
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
USING THE MONITOR SET 19  
- 16:4 : This selection will allow you to adjust the  
picture horizontally, in linear proportion, to fill the  
entire screen(useful for viewing 4:3 formatted  
DVDs).  
- 4:3 : This selection will allow you to view a  
picture with an original 4:3 aspect ratio, black  
bars will appear on both the left and right of the  
screen.  
- Just Scan : This Selection will allow you view  
the picture of best quality without loss of original  
picture in high resolution image. Note: If there is  
noise in original Picture, You can see the noise  
at the edge.  
- TOP : This selection will allow you to display only  
the upper part of the video input.  
Just Scan  
- 1:1 : The aspect ratio is not adjusted from the  
original. (Only Display Port PC, HDMI PC,  
DVI-D PC, RGB PC)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 USING THE MONITOR SET  
Using the input list  
Selecting an input source  
Press INPUT to access the input source list.  
1
2
Press the Navigation buttons to scroll to one of  
the input sources and press OK.  
Input source  
RGB  
Description  
View a PC display on the screen  
View a PC display on the screen  
DVI-D  
HDMI  
Watch contents from a PC, DVD  
of Digital set-top box other high  
definition devices  
Display Port Watch contents in a PC, DVD  
of Digital set-top box other high  
definition devices  
USB  
Plays the multimedia file saved in  
the USB.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 21  
ENTERTAINMENT  
To set up the network settings: (Even if your dis-  
play has already connected automatically, running  
setup again will not harm anything),  
Connecting to a wired network  
Connect the display to a local area network (LAN)  
via the LAN port as shown on the following illustra-  
tion and set up the network settings.  
Only supports wired network connection.  
After making a physical connection, a small  
number of networks may require the display net-  
work settings to be adjusted. For most networks,  
the display will connect to automatically without  
any adjustments.  
1
2
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to NET-  
WORK and press OK.  
3
4
Press the Navigation buttons to select Net-  
work Setting and press OK.  
If you already set Network Setting, select  
Resetting. The new connection settings resets  
the current network settings.  
For detail information, contact your internet pro-  
vider or router manual.  
5
Select IP Auto Setting or IP Manual Setting.  
- If selecting IP Manual Setting, press the  
Navigation and Number buttons. IP address-  
es will need to be input manually.  
LAN  
- IP Auto Setting: Select this if there is a  
DHCP server (Router) on the local area net-  
work (LAN) via wired connection, the display  
will automatically be allocated an IP address.  
If you’re using a broadband router or broad-  
band modem that has a DHCP (Dynamic  
Host Configuration Protocol) server function.  
The IP address will automatically be deter-  
mined.  
Router  
Router  
LAN  
WAN  
6
When you are finished, press EXIT.  
Cable modem  
ETHERNET  
@
Cable modem  
Internet  
CAUTION  
CAUTION  
yyNetwork setting menu will not be avail-  
able until the display connected to physical  
network.  
yyDo not connect a modular phone cable to the  
LAN port.  
yySince there are various connection meth-  
ods, please follow the specifications of your  
telecommunication carrier or internet service  
provider.  
yySince there are various connection meth-  
ods, please follow the specifications of your  
telecommunication carrier or internet service  
provider.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22 ENTERTAINMENT  
yyA DSL modem is required to use DSL service  
and a cable modem is required to use cable  
modem service. Depending on the access  
method of and subscriber agreement with your  
ISP, you may not be able to use the internet  
connection feature contained in this display or  
you may be limited to the number of devices  
you can connect at the same time. (If your ISP  
limits sub-scription to one device, this display  
may not be allowed to connect when a PC is  
already connected.)  
NOTE  
yyIf you want to access the Internet directly on  
your display, the internet connection should  
always be on.  
yyIf you cannot access the Internet, check  
the network conditions from a PC on your  
network.  
yyWhen you use Network Setting, check the  
LAN cable or check if DHCP in the router is  
turned on.  
yyIf you do not complete the network settings,  
the network may not work properly.  
yyThe use of a “Router” may not be allowed or its  
usage may be limited depending on the poli-  
cies and restrictions of your ISP. For details,  
contact your ISP directly.  
Tips for Network setting  
yyUse a standard LAN cable with this display.  
Cat5 or better with a RJ45 connector.  
yyMany network connection problems during set  
up can often be fixed by re-setting the router  
or modem. After connecting the display to the  
network, quickly power off and/or disconnect  
the power cable of the network router or cable  
modem. Then power on and/or connect the  
power cable again.  
Network Status  
yyDepending on the internet service provider  
(ISP), the number of devices that can receive  
internet service may be limited by the applica-  
ble terms of service. For details, contact your  
ISP.  
1
2
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to NET-  
WORK and press OK.  
yyLG is not responsible for any malfunction of the  
display and/or the internet connection feature  
due to communication errors/malfunctions as-  
sociated with your internet connection, or other  
connected equipment.  
3
Press the Navigation buttons to select Net-  
work Status.  
4
5
Press OK to check the network status.  
When you are finished, press EXIT.  
yyLG is not responsible for problems within your  
internet connection.  
yyYou may experience undesired results if the  
network connection speed does not meet the  
requirements of the content being accessed.  
yySome internet connection operations may not  
be possible due to certain restrictions set by  
the Internet service provider (ISP) supplying  
your Internet connection.  
Option  
Setting  
Description  
Return to the network setting menu.  
Test the current network status after set-  
ting the network.  
Test  
Close  
Return to the previous menu.  
yyAny fees charged by an ISP including, without  
limitation, connection charges are your respon-  
sibility.  
yyA 10 Base-T or 100 Base-TX LAN port is  
required when using a wired connection to this  
display. If your internet service does not allow  
for such a connection, you will not be able to  
connect the display.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 23  
Tips for using USB storage devices  
Connecting USB storage devices  
yyOnly a USB storage device is recognizable.  
yyIf the USB storage device is connected  
through a USB hub, the device is not recog-  
nizable.  
Connect USB storage devices such as a USB  
flash memory, external hard drive to the display  
and use multimedia features (See "Browsing files"  
Connect a USB flash memory or USB memory  
card reader to the Display as shown on the follow-  
ing illustration. The My media screen appears.  
yyA USB storage device using an automatic  
recognition programme may not be recog-  
nized.  
yyA USB storage device which uses its own  
driver may not be recognized.  
yyThe recognition speed of a USB storage  
device may depend on each device.  
yyPlease do not turn off the display or unplug  
the USB device when the connected USB  
storage device is working. When such device  
is suddenly separated or unplugged, the  
stored files or the USB storage device may  
be damaged.  
or  
(not included)  
(not included)  
yyPlease do not connect the USB storage  
device which was artificially maneuvered on  
the PC. The device may cause the product to  
malfunction or fail to be played. Never forget  
to use only a USB storage device which has  
normal music files, image files or movie files.  
yyPlease use only a USB storage device which  
was formatted as a FAT32 file system, NTFS  
file system provided with the Windows op-  
erating system. In case of a storage device  
formatted as a different utility program which  
is not supported by Windows, it may not be  
recognized.  
CAUTION  
yyDo not turn the display off or remove a USB  
storage device while EMF(my media) Menu  
is activated, as this could result in loss of  
files or damage to the USB storage device.  
yyBack up your files saved on a USB storage  
device frequently, as you may lose or dam-  
age the files and this may be not covered by  
the warranty.  
yyPlease connect power to a USB storage  
device(over 0.5 A) which requires an external  
power supply. If not, the device may not be  
recognized.  
yyPlease connect a USB storage device with  
the cable offered by the device maker.  
yySome USB storage devices may not be sup-  
ported or operated smoothly.  
yyFile alignment method of USB storage  
device is similar to Window XP and filename  
can recognize up to 100 English characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24 ENTERTAINMENT  
yyBe sure to back up important files since data  
stored in a USB memory device may be  
damaged. We will not be responsible for any  
data loss.  
Browsing files  
Access the photo, music, or movie lists and browse  
files.  
Connect a USB storage device.  
1
2
3
yyIf the USB HDD does not have an external  
power source, the USB device may not be  
detected. So be sure to connect the external  
power source.  
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to My  
Media and press OK.  
- Please use a power adaptor for an external  
power source. We do not guarantee an USB  
cable for an external power source.  
yyIf your USB memory device has multiple  
partitions, or if you use a USB multi-card  
reader, you can use up to 4 partitions or USB  
memory devices.  
Press the Navigation buttons to choose  
from Movie List, Photo List, Music List or  
Contents List and press OK.  
4
yyIf a USB memory device is connected to a  
USB multi-card reader, its volume data may  
not be detected.  
Movie List  
Photo List  
Music List  
Contents List  
1
2
yyIf the USB memory device does not work  
properly, disconnect and reconnect it.  
yyHow fast a USB memory device is detected  
differs from device to device.  
Page 1/1  
Photo List  
Page 1/1  
Drive1  
USB External  
4
5
001  
010  
002  
003  
012  
004  
013  
005  
006  
015  
007  
008  
009  
011  
014  
yyIf the USB is connected in Standby Mode,  
specific hard disk will automatically be  
loaded when the display is turned on.  
yyThe recommended capacity is 1 TB or less  
for a USB external hard disk and 32 GB or  
less for USB memory.  
Move  
View  
P
Page Change  
Change Numbers  
Mark Mode  
Exit  
To Music List  
3
No.  
Description  
yyAny device with more than the recommended  
capacity may not work properly.  
Moves to upper level folder  
Current page/Total pages  
1
yyIf a USB external hard disk with a “Energy  
Saving” function does not work, turn the  
hard disk off and on again to make it work  
properly.  
2
3
Corresponding buttons on the  
remote control  
Current page/ total pages of contents  
under the folder focused on  
4
5
1
yyUSB storage devices below USB 2.0 are  
supported as well. But they may not work  
properly in the movie list.  
1
Contents under the folder focused on  
Buttom  
Description  
Press the green button to toggle between  
Green Photo List -> Music List, Music List ->  
button Contents List, Contents List -> Movie  
List or Movie List -> Photo List.  
yyMaximum of 999 folders or files can be rec-  
ognized under one folder.  
Yellow A method to view in 5 large thumbnail or  
button simple list.  
yyA USB 3.0 storage device may not work.  
Blue  
Convert to Mark Mode.  
button  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ENTERTAINMENT 25  
Supported file format  
Type  
Movie  
Supported file format  
Music  
MP3  
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T  
RP,TP,ASF,WMV,FLV)  
Bit rate 32 to 320  
y
y
y
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1  
kHz, 48 kHz  
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05  
kHz, 24 kHz  
Sampling rate MPEG2.5 Layer3 : 8 kHz,  
11.025 kHz, 12 kHz  
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.  
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.  
avi(motion-jpeg)/*.  
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting  
file  
Content  
(when  
using  
SuperSign  
Manager)  
File Extensions : *.cts/ *.cse  
Movie  
Video format : DivX 3.11, DivX4, DivX5. DivX6  
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10  
beta-1/beta-2,  
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.  
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.  
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.  
mkv(motion JPEG)  
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,  
JPEG, Sorenson H.263  
Audio format : Dolby Digital, AAC, Mpeg, MP3,  
Video format: MPEG1, MPEG2, MPEG4,H.264/  
LPCM, HE-AAC, ADPCM, WMA  
AVC, DivX 3.11, DivX4, DivX5. DivX6  
Bit rate : within 32 kbps to 320 kbps(MP3)  
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03,Xvid  
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)  
External Subtitle format : *.smi/*.srt/*.sub  
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.  
txt(TMPlayer)/*.psb(PowerDivX)  
Audio format: MP2,MP3,Dolby Digital, LPCM,  
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3  
Internal Subtitle format : only, XSUB (It is the  
File  
Item  
Profile  
subtitle format used in DivX6 files)  
Extensions  
Photo  
JPEG  
Photo JPEG  
supported SOF0: baseline  
file format  
Baseline : 64 x 64 to 15360 x 8640  
Progressive : 64 x 64 to 1920 x 1440  
JPG  
PNG  
BMP  
SOF1: Extend  
Sequential  
y
y
You can play JPEG files only.  
Non-supported files are displayed in the form  
of predefined icon.  
SOF2:  
Progressive  
Photo size Min: 64 x 64  
Only 3D Models  
Max Type:  
1366 x 768  
File  
Item  
Profile  
Extensions  
Music MP3  
Bit rate  
32 kbps to 320  
kbps  
2D  
jpeg  
jpg  
jpe  
supported SOF0: baseline  
file format  
SOF1: Extend  
Sampling  
rate  
32 kHz, 44.1  
kHz, 48 kHz  
(MPEG1 L3)  
Sequential  
SOF2:  
Progressive  
16 kHz, 22.05  
kHz, 24 kHz  
(MPEG2 L3)  
photo size Min: 64 x 64  
Max-Normal  
Type:  
8kHz, 11.025  
kHz, 12 kHz  
(MPEG2.5 L3)  
15360 (W) x  
8640 (H)  
Progressive  
Type:  
1920 (W) x  
1440 (H)  
3D  
mpo  
supported mpo  
file format  
photo size 4:3 size:  
3,648 x 2,736  
2,592 x 1,944  
2,048 x 1,536  
3:2 size:  
3,648 x 2,432  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26 ENTERTAINMENT  
5
Play a movie.  
Viewing movies  
Play video files on display. Your display shows all  
of the video files saved in a USB storage device or  
shared folder on a PC.  
NOTE  
yyNon-supported files are displayed the preview  
image by icon only  
yyAbnormal files are displayed in the form of  
bitmap  
.
1
2
3
4
Press the Navigation buttons to scroll to My  
.
Media and press OK.  
Press the Navigation buttons to scroll to Movie  
List and press OK.  
6
Control playback by using the following buttons.  
Press the Navigation buttons to scroll to a  
folder you want and press OK.  
Press the Navigation buttons to scroll to a file  
you want and press OK.  
01:02:30 / 02:30:25  
MENU  
Page 1/1  
Movie List  
Hide  
Exit  
Option  
Page 1/1  
Drive1  
USB1 USB Drive  
001  
005  
002  
006  
003  
004  
Button  
r
Description  
Stops the playback  
Plays a video  
Move  
Play  
P
Page Change  
s
Change Numbers  
Mark Mode  
Exit  
To Photo list  
Pauses or resumes the playback  
Scans backward in a file  
t
Page 1/1  
v
Movie List  
Mark Mode  
Page 1/1  
Drive1  
Scans forward in a file  
USB1 USB Drive  
w
001  
005  
002  
006  
003  
004  
MENU  
HIDE  
EXIT  
Show the Option menu.  
051. Apple_ ......  
02:30:25  
Hide the menu on the full-sized screen.  
Return to Movie List.  
Skips to specific points in a file dur-  
ing playback. The time of a specific  
point will appear on the status bar. In  
some files, this function may not work  
Move  
Mark  
P
Page Change  
< or >  
Mark All  
Unmark All  
Exit Mark Mode  
Exit  
Play Marked  
properly.  
Press the ENERGY SAVING button  
ENERGY  
SAVING(  
repeatedly to increase the brightness  
of your screen.  
Menu  
Description  
)
Play Marked  
Play the selected movie file.  
Once a movie file finishes playing,  
the next selected one will be played  
automatically.  
Mark All  
Mark all movie files on the screen.  
Deselect all marked movie files.  
Exit the Mark Mode.  
Unmark All  
Exit Mark  
Mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 27  
Tips for using playing video files  
Video options  
1
2
Press MENU to access the Pop-Up menus.  
yySome user-created subtitles may not work  
properly.  
Press the Navigation buttons to scroll to Set  
Video Play., Set Video. or Set Audio. and  
press OK.  
yySome special characters are not supported  
in subtitles.  
yyHTML tags are not supported in subtitles.  
yySubtitles in languages other than the sup-  
ported languages are not available.  
yyThe screen may suffer temporary interrup-  
tions (image stoppage, faster playback, etc.)  
when the audio language is changed.  
yyA damaged movie file may not be played  
correctly, or some player functions may not  
be usable.  
NOTE  
yyOption values changed in Movie List does  
not affect Photo List and Music List.  
yyOption value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
yyWhen replaying the video file after stopping,  
you can play from where it stopped previ-  
ously.  
yyMovie files produced with some encoders  
may not be played correctly.  
yyIf the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
yyVideos with resolutions higher than  
1920X1080@25/30P may not work properly  
depending on the frame.  
yyMovie files other than the specified types and  
formats may not work properly.  
yyMax bitrate of playable movie file is 20 Mbps.  
(only, Motion JPEG : 10 Mbps)  
yyWe do not guarantee smooth playback of  
profiles encoded level 4.1 or higher in H.264/  
AVC.  
yyDTS Audio codec is not supported.  
yyA movie file more than 30 GB in file size is  
not supported for playback.  
yyA DivX movie file and its subtitle file must be  
located in the same folder.  
yyA video file name and its subtitle file name  
must be identical for it to be displayed.  
yyPlaying a video via a USB connection that  
doesn’t support high speed may not work  
properly.  
yyFiles encoded with GMC(Global Motion  
Compensation) may not be played.  
yyWhen you are watching the movie by Movie  
List function, you can adjust an image by  
Energy Saving key on the remote control.  
User setup for each image mode does not  
operate.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28 ENTERTAINMENT  
When you select the Set Video Play,  
Code Page  
Latin1  
Support Language  
English, Spanish, French,  
1
Press the Navigation buttons to scroll to show  
the Picture Size, Audio Language, Subtitle  
Language or Repeat.  
German, Italian, Portuguese,  
Danish, Romanian, Norwegian,  
Albanian, Gaelic, Welsh, Irish,  
Catalan,Valencian  
2
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
Latin2  
Bosnian, Polish, Croatian, Czech,  
Slovak, Slovenian, Serbian,  
Hungarian  
Latin4  
Estonian, Latvian, Lithuanian  
Cyrillic  
Bulgarian, Macedonian, Russian,  
Ukrainian, Kazakh  
Menu  
Picture Size  
Description  
Selects your desired picture  
Greek  
Greek  
format during movie play.  
Audio  
Changes the Language Group of the  
Turkish  
Korean  
Turkish  
Korean  
Language  
audio during movie play. Files  
with a single audio track cannot be  
selected.  
Subtitle  
Turn on/off the subtitle.  
Language  
Language  
Code Page  
Sync  
Activated for SMI subtitle and  
can select the language within the  
subtitle.  
Can select the font for subtitle.  
When set to default, same font as  
general menu will be used.  
Adjusts the time synchronisation of  
the subtitle from -10 secs to +10 secs  
by steps of 0.5 secs during movie  
play.  
NOTE  
yyOnly 10,000 of sync blocks can be supported  
within the subtitle file.  
yyWhen playing a video, you can adjust the  
Picture Size by pressing the ARC button.  
yySubtitles in your language are only sup-  
ported when the OSD menu is also in this  
language.  
Position  
Changes the position of the  
subtitle either up or down during  
movie play.  
yyThe code page options may be disabled de-  
pending on the language of the subtitle files.  
yySelect the appropriate code page for the  
subtitle files.  
Size  
Selects your desired Subtitle size  
during movie play.  
Repeat  
Turn on/off repeat function of  
movie playback. When turned on, the  
file within the folder will be played  
back repeatedly. Even when the  
repeated playback  
is turned off, it can run the playback if  
the file name is similar to the previous  
file.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 29  
Page 1/1  
When you select the Set Video,  
Photo List  
Page 1/1  
USB1 USB Drive  
Drive1  
1
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
001  
010  
002  
003  
012  
004  
013  
005  
006  
015  
007  
008  
009  
011  
014  
Move  
View  
P
Page Change  
When you select the Set Audio,  
Change Numbers  
Mark Mode  
Exit  
To Music List  
1
2
Press the Navigation buttons to scroll to show  
Page 1/1  
Photo List  
the Sound Mode, Clear Voice II or Balance.  
Mark Mode  
Page 1/1  
009  
USB1 USB Drive  
Drive1  
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
001  
010  
002  
003  
004  
013  
005  
014  
006  
015  
007  
008  
011  
012  
Move  
Mark  
P
Page Change  
Mark All  
Unmark All  
Exit Mark Mode  
Exit  
View Marked  
Viewing photos  
View image files saved in a USB storage device.  
The displays on the screen may differ from the  
model.  
Menu  
Description  
View Marked  
Mark All  
Display the selected photo file.  
Mark all photo files on the screen.  
Deselect all marked photo files.  
1
2
3
4
Press the Navigation buttons to scroll to My  
Media and press OK.  
Unmark All  
Press the Navigation buttons to scroll to Photo  
Exit Mark Mode Exit the Mark Mode.  
List and press OK.  
Press the Navigation buttons to scroll to a  
5
View photos.  
folder you want and press OK.  
Press the Navigation buttons to scroll to a file  
you want and press OK.  
NOTE  
yyNon-supported files are displayed the pre-  
view image by icon only  
yyAbnormal files are displayed in the form of  
bitmap  
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 ENTERTAINMENT  
Using photo options  
ENERGY  
SAVING(  
Press the ENERGY SAVING button  
repeatedly to change the brightness of  
your screen.  
)
Use the following options while viewing photos.  
Option  
y Slide Speed: Selects a slideshow  
speed (Fast, Medium, Slow).  
y TransitionEffect: Set the view mode  
of the slideshow.  
y BGM: Selects a music folder for  
the background music. Press the  
Navigation buttons to scroll to select  
the Repeat or Random. Press the  
Navigation buttons to scroll to make  
appropriate adjustments.  
2/13  
NOTE  
Hide  
MENU  
Option  
Exit  
Slideshow  
BGM  
yyYou cannot change the music  
folder while the background  
music is playing.  
Options  
Number of selected photos  
yyYou can only select the MP3  
folder saved on the device that  
currently displays the photo.  
Option  
Description  
Slideshow  
Starts or stops a slideshow with selected  
photos.  
Hide  
EXIT  
Hides the option window.  
To display the options, press OK.  
Return to Photo List.  
If there are no selected photos, all pho-  
tos saved in the current folder display  
during a slideshow.  
To set a slideshow speed, select Op-  
tion.  
BGM  
Turns the background music on or off.  
To set the background music folder,  
select Option.  
You can adjust Option by MENU button  
on the remote control.  
Photo options  
Rotates photos clockwise (90°, 180°,  
270°, 360°).  
(Rotate)  
1
Press MENU to show the Option menus.  
NOTE  
2
Press the Navigation buttons to scroll to Set  
Photo View, Set Video or Set Audio and press  
OK.  
yyThe supported photo size is  
limited. You cannot rotate a  
photo if the resolution of the  
rotated width is larger than the  
supported resolution size.  
View the photo by zoom in 2, 4 times.  
NOTE  
NOTE  
yyOption values changed in Movie List does  
not affect Photo List and Music List.  
yyOption value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
yyPhotos with a resolution of  
960x540 or less cannot be  
enlarged.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 31  
When you select the Set Photo View,  
1
2
Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.  
Press the Navigation buttons to scroll to make appropriate adjustments.  
Transition Effect Option  
Option  
Description  
Sliding  
Pushes the current slide out of view as it plays to the next slide.  
Stairs  
Pushes the current slide in a staircase shape as it plays to the next slide.  
Door Open  
/Close  
Pushes the current slide like opening or closing the door as it plays to the next slide.  
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide  
Shutter  
Fade In  
Fades the slide out slowly before playing to the next slide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 ENTERTAINMENT  
When you select the Set Video,  
Listening to music  
1
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
1
2
3
4
Press the Navigation buttons to scroll to My Me-  
dia and press OK.  
Press the Navigation buttons to scroll to Music  
List and press OK.  
When you select the Set Audio,  
Press the Navigation buttons to scroll to a folder  
1
2
Press the Navigation buttons to scroll to show  
you want and press OK.  
the Sound Mode, Clear Voice II or Balance.  
Press the Navigation buttons to scroll to a file  
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
you want and press OK.  
Page 1/1  
Music List  
Page 1/1  
USB1 USB Drive  
Drive1  
001.  
-
B01.mp3  
002. -B02.mp3  
00:00  
003. B03.mp3  
00:00  
004.  
-
B04.mp3  
00:00  
00:00  
005.  
-
B05.mp3  
00:00  
Move  
Play  
Mark Mode  
P
Page Change  
Exit  
Change Numbers  
To Movie List  
Page 1/1  
Music List  
Mark Mode  
Page 1/1  
USB1 USB Drive  
Drive1  
001.  
-
B01.mp3  
B05.mp3  
002. -B02.mp3  
00:00  
003. B03.mp3  
00:00  
004.  
-
B04.mp3  
00:00  
00:00  
005.  
-
00:00  
Move  
Unmark All  
Mark  
P
Page Change  
Mark All  
Play Marked  
Exit  
Exit Mark Mode  
Menu  
Description  
Play Marked Display the selected music file.  
Mark All  
Mark all music files on the screen.  
Deselect all marked music files.  
Unmark All  
Exit Mark Mode Exit the Mark Mode.  
5
Play music.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 33  
Tips for playing music files  
This unit cannot support the ID3 Tag  
6
Control playback by using the following buttons.  
yy  
Page 1/1  
embedded MP3 files.  
Music List  
3
file(s) Marked  
Drive1  
Page 1/1  
NOTE  
004.  
-
B04.mp3  
005.  
-
B05.mp3  
006.  
-
B06.mp3  
007.  
-
B07.mp3  
008.  
-
B08.mp3  
00:00  
00:00  
00:00  
00:00  
00:00  
005. - B05.mp3  
02:30 / 03:25  
Hide  
yyNon-supported files are displayed the pre-  
MENU  
Play with Photo  
Option  
Exit  
view image by icon only  
yyAbnormal files are displayed in the form of  
bitmap  
.
.
Button  
Description  
yyA damaged or corrupted music does not play  
but displays 00:00 in playtime.  
Stops playing back the file and moves  
back to the music list.  
Plays a music file  
yyA music downloaded from a paid service with  
copyright protection does not start but dis-  
plays inappropriate information in playtime.  
Pauses or resumes playback  
Skips to the next file  
yyIf you press OK,  
buttons, screen saver is  
Skips to the previous file  
stopped.  
When playing,  
or  
When you press the v button, the previ-  
ous music file will be played.  
yyThe PLAY( ), Pause( ),  
,
,
buttons  
on the remote control are also available in  
this mode.  
When you press the w button, the next  
music file will be played.  
yyYou can use the  
music and the  
ous music.  
button to select the next  
button to select the previ-  
Green  
button  
Start playing the selected music files and  
then move to the Photo List.  
Press the ENERGY SAVING button re-  
peatedly to change the brightness of  
your screen.  
ENERGY  
SAVING(  
)
file name  
MENU  
Hide  
Show the Option menu.  
Hides the option window.  
002. B02.mp3  
00:31 / 04:04  
To display the options, press OK.  
When you press the EXIT button while  
the Music player is displayed, only the  
music will be stopped and the player will  
not return to normal viewing.  
Time elapsed /Duration  
EXIT  
When you press the EXIT button while  
the music is stopped or while the music  
player is hidden, the player will return to  
normal viewing.  
When using the < or > button during  
playback a cursor indicating the position  
can be played.  
< or >  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34 ENTERTAINMENT  
Music options  
Viewing the Contents List  
1
2
Press MENU to access the Pop-Up menus.  
Plays back the stored files using the Export option  
in SuperSign Manager.  
Press the Navigation buttons to scroll to Set Au-  
dio Play or Set Audio and press OK.  
1
2
3
4
Press the Navigation buttons to scroll to My  
Media and press OK.  
Press the Navigation buttons to scroll to Con-  
NOTE  
tents List and press OK.  
yyOption values changed in Movie List does  
not affect Photo List and Music List.  
yyOption value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
Press the Navigation buttons to scroll to a  
folder you want and press OK.  
Press the Navigation buttons to scroll to a file  
you want and press OK.  
Page 1/1  
Contents List  
When you select the Set Audio Play,  
Page 1/1  
USB1 USB Drive  
Drive1  
test1.cts  
test2.cts  
07/01/2011  
test3.cts  
07/01/2011  
test4.cts  
07/01/2011  
07/01/2011  
1
Press the Navigation buttons to scroll to select  
test5.cts  
07/01/2011  
the Repeat or Random.  
Move  
Change Numbers  
Play  
P
Page Change  
2
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
To Movie List  
Exit  
NOTE  
When you select the Set Audio,  
yyWhile playing media files from Contents List,  
only the BACK, EXIT or Volume button are  
available. Selecting the BACK or EXIT button  
stops playing media files and returns to the  
screen view mode.  
yyIf there is the AutoPlay folder in the USB  
device and its files are in supported formats,  
they can be played back automatically when  
the USB device is connected to the monitor.  
1
2
Press the Navigation buttons to scroll to select  
the Sound Mode, Clear Voice II or Balance.  
Press the Navigation buttons to scroll to make  
appropriate adjustments.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENTERTAINMENT 35  
DivX® VOD Deregistration  
DivX® VOD Guide  
You should deregister your device with 8 digit DivX  
com/vod.  
DivX® VOD Registration  
In order to play purchased or rented DivX® VOD  
contents, you should register your device with 10  
digit DivX registration code from your device at  
1
2
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to MY  
MEDIA and press OK.  
3
4
Press the Blue button.  
1
2
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to Deacti-  
vation and press OK.  
Press the Navigation buttons to scroll to MY  
MEDIA and press OK.  
5
Press the Navigation buttons to select Yes to  
confirm.  
3
4
Press the Blue button.  
Press the Navigation buttons to scroll to DivX  
Reg. Code and press OK.  
Deregistration code :  
********  
5
6
View the registration code of your display.  
Continue with registration?  
When you are finished, press EXIT.  
Yes  
No  
When you return to the previous menu, press  
BACK.  
6
When you are finished, press EXIT.  
When you return to the previous menu, press  
BACK.  
You must register your device to  
play DivX protected videos.  
Registration code : **********  
Close  
NOTE  
Once the deregistration is executed, you  
yy  
must register your device again to see  
DivX® VOD contents.  
NOTE  
yyWhile you are checking the registration  
code, some buttons may not work.  
yyIf you use the DivX registration code of an-  
other device, you cannot play the rented or  
purchased DivX file. Make sure to use the  
DivX registration code assigned to your TV.  
yyThe video or audio files that are not con-  
verted by the standard DivX codec may be  
corrupted or not be played.  
yyThe DivX VOD code allows you to activate  
up to 6 devices under one account.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36 ENTERTAINMENT  
5
Select the PIP or PBP icon from the play list.  
Using PIP/PBP  
Displays videos or photos stored on a USB device  
on a single monitor by dividing it into the main and  
sub screens. (See p.45)  
1
2
Press the MENU button to move to OPTION  
and press OK.  
Press PIP/PBP to select PIP or PBP and then  
01:02:30 / 02:30:25  
MENU  
Hide  
Exit  
Option  
press OK.  
< Movie List >  
PIP/PBP  
Pre.  
Move  
Mode  
Position  
Size  
Off  
PIP  
PBP  
3
Select Movie List or Photo List from My  
Media. (With PIP/PBP selected, the Music  
List and Contents List are deactivated.)  
2/13  
Hide  
MENU  
Option  
Exit  
Slideshow  
BGM  
< Photo List >  
Movie List  
Photo List  
Music List  
Contents List  
6
Select either Main or Sub for sound. You must  
to select the output sound before running the  
PIP or PBP function.  
4
Select a file you want and then press OK.  
Page 1/1  
Select the sound path.  
Movie List  
Page 1/1  
Drive1  
USB1 USB Drive  
Main  
Sub  
001  
005  
002  
006  
003  
004  
7
The sub screen is displayed on the main  
screen.  
Move  
Play  
P
Page Change  
Change Numbers  
Mark Mode  
Exit  
To Photo list  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 37  
CUSTOMIZING SETTINGS  
Accessing the main menus  
ARC  
UTE  
Press MENU to access the main menus.  
1
2
AUTO  
MENU  
S.MENU  
Press the Navigation buttons to scroll to one of the following menus and  
press OK.  
OK  
BACK  
ID  
TILE  
EXIT  
ON  
OFF  
Press the Navigation buttons to scroll to the setting or option you want  
and press OK.  
3
4
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
Adjusts the image size,  
quality, or effect.  
Adjusts the sound quality,  
effect, or volume level.  
Sets the time, date, or  
Timer feature.  
PICTURE  
AUDIO  
TIME  
MY MEDIA (See p.23)  
Display and play movie,  
photo and music content  
stored on your USB.  
Customizes the general  
settings.  
OPTION  
NETWORK  
MY MEDIA  
Sets up the network  
setting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
38 CUSTOMIZING SETTINGS  
PICTURE settings  
Move  
OK  
PICTURE  
• Aspect Ratio  
: 16:4  
: Off  
Press MENU to access the main menus.  
1
2
Energy Saving  
• Smart Energy Saving : Off  
• Picture Mode : Standard  
Press the Navigation buttons to scroll to PICTURE and  
press OK.  
• Backlight  
• Contrast  
• Brightness  
• Sharpness  
• Color  
70  
100  
50  
50  
60  
0
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
- To return to the previous level, press BACK.  
R
G
C
• Tint  
W
• Color Temp.  
0
When you are finished, press EXIT.  
When you return to the previous menu, press  
BACK.  
• Advanced Control  
• Picture Reset  
• Screen  
The available picture settings are described in the following:  
Setting  
Description  
Changes the image size to view images at its optimal size (See p.18).  
Aspect Ratio  
Energy Saving Sets to automatically adjust the screen brightness corresponding to the surroundings.  
Level  
Off  
Disables Energy Saving function.  
Minimum/  
Medium/  
Maximum  
Selects the brightness level of the backlight.  
Screen Off  
The screen turns off in 3 seconds.  
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.  
Saving  
Level  
On  
Off  
Enables the Smart Energy Saving function to save power consumption as much  
as the value set in the smart energy saving rate.  
Disables the Smart Energy Saving function.  
Picture Mode  
Selects one of the preset image or customizes options in each mode for the best Monitor set screen  
performance. You are also able to customize advanced options of each mode.  
The available preset picture modes vary depending on the Monitor set .  
Mode  
Vivid  
Adjusts the video image for the retail environment by enhancing the contrast,  
brightness, Color, and sharpness.  
Standard  
Cinema  
Adjusts the image for the normal environment.  
Optimizes the video image for a cinematic look to enjoy movies as if you are in a  
movie theater.  
Sport  
Optimizes the video image for high and dynamic actions by emphasizing primary  
Colours such as white, grass, or sky blue.  
Game  
Optimizes the video image for a fast gaming screen such as PCs or games.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 39  
Setting  
SCREEN  
Description  
Customizes the PC display options in RGB mode.  
(In RGB  
Mode Only)  
Option  
Resolution  
Auto Configure  
Selects a proper resolution. See “Customizing PC display options”.  
Sets to adjust the screen position, clock, and phase automatically.  
The displayed image may be unstable for a few seconds while the configuration is  
in progress.  
Position/Size/  
Phase  
Adjusts the options when the picture is not clear, especially when characters are  
shaky, after the auto configuration.  
Reset  
Restores the options to the default setting.  
Basic image options  
Setting  
Description  
Backlight  
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the  
brightness level, the screen becomes darker and the power consumption will be reduced  
without any video signal loss.  
Contrast  
Increases or decreases the gradient of the video signal. You may use Contrast when the  
bright part of the picture is saturated.  
Brightness  
Sharpness  
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part  
of the picture is saturated.  
Adjusts the level of crispness in the edges between the light and dark areas of the picture.  
The lower the level, the softer the image.  
Color  
Adjusts intensity of all colors.  
Tint  
Adjusts the balance between red and green levels.  
Color Temp .  
Advanced Control  
Picture Reset  
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.  
Customizes the advanced options. Refer to the Advanced image options. (See p.40).  
Restores the options to the default setting.  
NOTE  
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game  
yy  
the subsequent menus will be automatically set.  
You cannot adjust color and tint in the RGB-PC/ DVI-D-PC(DTV)/ HDMI-PC mode.  
yy  
When using the Smart Energy Saving function, the screen may look saturated in the white area of a  
yy  
still image.  
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is  
yy  
disabled.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40 CUSTOMIZING SETTINGS  
Advanced Control  
Setting  
Description  
Dynamic  
Contrast  
(Off/High/  
Medium/Low)  
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The  
picture is improved by making bright parts brighter and dark parts darker.  
(The current model does not support this function.)  
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances  
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid.  
(The current model does not support this function.)  
Clear White  
Make the white area of screen brighter and more white.  
(Off/High/Low)  
Skin Color  
(-5 to 5)  
It detects the skin area of video and adjusts it to express a natural skin color.  
Noise  
Reduces screen noise without compromising video quality.  
(The current model does not support this function.)  
Reduction  
(Off/High/  
Medium/Low)  
Digital Noise  
Reduction  
This option reduces the noise produced while creating digital video signals.  
(Off/High/  
Medium/Low)  
Gamma  
Set your own gamma value. On the monitor, high gamma values display whitish images and low  
(High/Medium/ gamma values display high contrast images.  
Low)  
Black Level  
(High/Low)  
Low: The picture of the screen gets darker.  
High: The picture of the screen gets brighter.  
Set black level of the screen to proper level.  
(Function works in the following mode - HDMI-DTV)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 41  
AUDIO settings  
Move  
OK  
AUDIO  
• Clear Voice II  
• Balance  
: Off  
Press MENU to access the main menus.  
1
2
L
R
0
• Sound Mode  
: Standard  
Press the Navigation buttons to scroll to AUDIO and press  
OK.  
• Infinite Sound: Off  
• Treble  
• Bass  
• Reset  
50  
50  
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
• Digital Audio Input : Audio In  
• Speaker : Off  
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available audio options are described in the following:  
Setting  
Description  
Clear Voice ll  
Balance  
By differentiating the human sound range from others, it helps users make dialog more clear.  
Adjusts balance between the left and right speakers according to your room environment.  
Sound Mode  
The best sound tone quality will be selected automatically depending on the video type that you're  
currently watching.  
Mode  
Standard  
Music  
The most commanding and natural audio.  
Select this option to enjoy the original sound when listening to the music.  
Select this option to enjoy sublime sound.  
Cinema  
Sport  
Select this option to watch sports broadcasting.  
To enjoy dynamic sound when playing a game.  
Game  
NOTE  
If sound quality or volume is not at the level you want, it is recommended to use a separate  
home theater system or amplifier to cope with different user environments.  
Option  
Infinite Sound  
LG's Infinity Sound option provides 5.1 channel stereo sound from two  
speakers.  
Treble  
Bass  
Controls the dominant sounds in the output. When you turn up the treble, it  
will increase the output to the higher frequency range.  
Makes the output sound softer. When you turn up the bass, it will increase  
the output to the lower Frequency.  
Reset  
Resets the sound mode to the default setting.  
Digital Audio  
Input  
HDMI/DisplayPort: Outputs the sound of digital signal from HDMI and display ports through the  
monitor speaker.  
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports  
to the Audio In port.  
Speaker  
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)  
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
42 CUSTOMIZING SETTINGS  
TIME settings  
Move  
OK  
TIME  
• Clock  
Press MENU to access the main menus.  
1
2
• Off Time  
: Off  
• On Time  
: Off  
Press the Navigation buttons to scroll to TIME and press  
OK.  
• Sleep Timer  
• Power On Delay  
• Auto Off  
: Off  
: Off  
: 15 min.  
Press the Navigation buttons to scroll to the setting or option  
you want and press OK.  
3
4
• Automatic Standby : 4hours  
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available time settings are described in the following:  
Setting  
Description  
Clock  
Sets the time feature.  
On/Off Time  
Sleep Timer  
Sets the time to turn on or off the Monitor set.  
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn  
it on again, the Sleep Timer will be set to off.  
Power on delay  
Auto off  
When connecting multiple monitors and turning the power on, the monitors are turned on individually  
to prevent overload.  
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15  
minutes.  
Automatic  
Standby  
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.  
NOTE  
Once the on or off time is set, these functions operate daily at the preset time.  
yy  
The scheduled power-off function works properly only when the device time is set correctly.  
yy  
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time  
yy  
if the set is turned on, and vice versa if the set is turned off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 43  
OPTION settings  
Move  
OK  
OPTION  
• Language  
Press MENU to access the main menus.  
1
2
• Power Indicator  
• ISM Method  
• DPM Select  
• Fail Over  
: Normal  
: On  
Press the Navigation buttons to scroll to OPTION and press  
OK.  
: Off  
• Factory Reset  
• Set ID  
Press the Navigation buttons to scroll to the setting or option  
you want and press OK.  
3
4
: 1  
• PIP/PBP  
• Key Lock  
- To return to the previous level, press BACK.  
• Product/Service Info.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available option settings are described in the following:  
Setting  
Language  
Description  
To choose the language in which the control names are displayed.  
Power Indicator  
Use this function to set the power indicator on the front side of the product to On or Off.  
(The power indicator is located on the bottom of the product.)  
ISM Method  
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods  
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed  
image to remain on the screen for a long period of time.  
Setting  
Normal  
Orbiter  
Leave on normal if you don't foresee image burn in being a problem.  
May help prevent ghost images. However, it is best not to allow any fixed  
image to remain on the screen. To avoid a permanent image on the screen,  
the screen will move every 2 minutes.  
Inversion  
This function inverts the panel color of the screen. The panel color is  
automatically inverted every 30 minutes.  
White Wash  
White wash fills the screen with solid white. This helps removes permanent  
images burned into the screen. A permanent image may be impossible to clear  
entirely with white wash.  
DPM Select  
Fail Over  
A user can choose to turn the power saving mode on / off.  
If there is no input signal, it automatically switches to another input with signal.  
Setting  
Off  
Stops auto switch of the input source.  
Auto  
Switches to another input source with video signal if no video signal comes  
from the current input source.  
Manual  
Selects the priority of input source for auto switch.  
When several input sources are found, the input source with a higher priority  
will be selected.  
Factory Reset  
Set ID  
Select this option to return to the default factory settings.  
You can assign a unique Set ID NO (name assignment) to each product when several products  
are connected for display. Specify the number (1 to 255) using the button and exit. Use the  
assigned Set ID to individually control each product using the Product Control Program.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
44 CUSTOMIZING SETTINGS  
Setting  
Description  
PIP/PBP  
Displays videos or photos stored in the USB device on a single monitor by dividing it into the main  
and sub screens.  
Option  
Mode  
Sets the type of secondary screen.  
*OFF: Disables the secondary screen.  
*PIP (Picture In Picture): Displays the secondary screen in the main screen.  
*PBP (Picture By Picture): Displays the secondary screen next to the main  
screen.  
Position  
Size  
Adjusts the position of the sub screen (top left, bottom left, top right, bottom  
right)  
The default value is the bottom right.  
Adjusts the size of the sub screen (Size 0 to 10).  
The default size of PIP (Size: 0) is 480x240; the maximum size 10 is 960x540.  
NOTE  
The Position and Size options are enabled only in PIP mode.  
yy  
Key Lock  
Key input does not work. This prevents invalid key input.  
Product/Service  
Info.  
Displays the model name, software version, serial number, IP address, MAC address and home  
page.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS 45  
PIP/PBP  
NOTE  
Displays videos or photos stored in the USB device on  
a single monitor by dividing it into the main and sub  
screens. (See p.36)  
The subscreen is only supported when using the  
yy  
USB device.  
Sub  
USB  
O
Mode  
*PIP(Picture In Picture): Displays the Sub screen  
in the main screen.  
*PBP(Picture By Picture): Displays the Sub  
screen next to the main screen.  
RGB  
HDMI/DVI-D/Display Port  
Main  
O
You can only change the size and position in PIP  
yy  
mode.  
With PBP selected, theAspect Ratio option in the  
yy  
PICTURE menu is disabled (Fixed as 16:4).  
You must select the output sound before running  
Sub  
screen  
Main  
screen  
yy  
the PIP or PBP functions. (Select either Main or  
Sub.)  
PIP  
PBP  
If you fail to select Main or Sub from the sound  
yy  
selection box, and if the OSD disappears after  
either a period of time or when the Exit or Back  
key is pressed, the PIP/PBP subscreen is not  
activated.  
Position  
Adjusts the position of the subscreen (top left,  
bottom left, top right, bottom right)  
You cannot change the sound while running the  
yy  
PIP or PBP functions. If you want to change the  
sound, please restart PIP/PBP.  
The picture quality of the subscreen is set  
yy  
according to the values selected in the main menu,  
not the USB device.  
If you play videos you selected in PIP/PBP mode,  
yy  
the videos will play back repeately in succession.  
The buttons below work in PIP mode.  
yy  
top left  
top right  
Button  
Photo  
Movie  
bottom left  
Size  
bottom right  
Adjusts the size of the subscreen (Size 0-10).  
PBP  
10 : 420x250  
960x502  
PIP  
0 : 180x120  
< 1920x502 >  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
46 CUSTOMIZING SETTINGS  
Picture ID  
Picture ID is used to change the settings of  
a specific set using a single IR receiver. The  
set receiving the IR signal communicates with  
another set via an RS232C connection. Each set  
is identified by a Set ID. If you assign the Picture  
ID using the remote control, only displays with  
the same Picture ID and Set ID can be controlled  
remotely.  
2
If you press the left/right buttons or press the  
ON button repeatedly, the Picture ID cycles  
through OFF and 1 to 4. Assign the ID you  
want.  
Picture ID  
Off  
IR Receiver  
Close  
RS232C cable  
If you assign the Set ID to each set with  
yy  
Picture ID  
Off  
multi-vision, and then assign the Picture ID  
using the red button on the remote control,  
the key command is displayed for the set  
with the same Set ID and Picture ID. A set  
with different Set IDs and Picture IDs cannot  
be controlled by IR signals.  
Close  
For more information on how to assign the  
yy  
Set ID, see "Set ID".  
The maximum value of the Picture ID can be  
yy  
set in the Total Set ID menu.  
Please refer to the Installation Manual for  
When using the 4 Set (Total Set ID: 4)  
Set IDs are assigned as shown in the picture.  
yy  
more information on Total Set ID assignment.  
1
Press the red ON button on the remote control  
to assign the Picture ID.  
NOTE  
BACK  
EXIT  
TILE  
OFF  
For example, if the Picture ID is assigned  
yy  
to 2, the upper right display (Set ID: 2) can  
be controlled by IR signals.  
ID  
ON  
For each set, you can change the  
yy  
settings for the PICTURE, AUDIO, TIME,  
NETWORK and MY MEDIA menus or the  
hot keys on the remote control.  
If you press the green OFF button for  
yy  
Picture IDs, the Picture IDs for all sets are  
turned off. If you then press any button  
on the remote control, all sets will start  
working again.  
Picture ID will be disabled while using the  
yy  
MY MEDIA menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS 47  
NETWORK settings  
Move  
OK  
NETWORK  
• Player Name Setting  
Press MENU to access the main menus.  
1
2
• Network Setting  
• Network Status  
• Server IP Setting  
• Server IP Status  
: None  
: Not connected  
Press the Navigation buttons to scroll to NETWORK and  
press OK.  
: Not connected  
Press the Navigation buttons to scroll to the setting or option  
you want and press OK.  
3
4
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available option settings are described in the following:  
Setting  
Description  
Player Name  
Setting  
Sets the player name used in SuperSign Manager.(Up to 20 characters)  
Network Setting  
Network Status  
Configure the network settings.  
Display the network status.  
- Internet is connected : Extermally connected  
- Network is connected : Only internally connected  
- Not connected : When there is no network connection  
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.  
Server IP Status  
Displays the connection status with the server.  
- Not connected : When there is no network connection with SuperSign server  
- Waiting for approval : When network connection with SuperSign server has been made, but  
access to server has not been approved by the server  
- Rejected : When network connection with SuperSign server has been made, but access to  
server has been rejected by the server  
- Internet is connected : When network connection with SuperSign server has been made and  
access to server has also been approved by the server  
CAUTION  
When setting the Player Name, input delay may occur if you press the buttons on the remote control  
yy  
continuously.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
48 MAKING CONNECTIONS  
MAKING CONNECTIONS  
Connect various external devices to the ports on the Monitor set’s back panel.  
Find an external device you want to connect to your Monitor set shown on the following illustration.  
Check the connection type of the external device.  
1
2
3
Go to the appropriate illustration and check the connection details.  
HD Receiver  
DVD  
Speaker  
USB  
Memory storage  
PC  
Camcorder/ Camera  
Gaming device  
Display Port - See p.15  
NOTE  
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.  
yy  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAKING CONNECTIONS 49  
HDMI connection  
Connecting to a HD receiver,  
DVD, Camcorder, Camera or  
Gaming Device  
Transmits the digital video and audio signals from  
an external device to the Monitor set. Connect the  
external device and the Monitor set with the HDMI  
cable as shown on the following illustration.  
Connect a HD receiver, DVD, or VCR player to the  
Monitor set and select an appropriate input mode.  
Back of the product.  
DVI connection  
Transmits the digital video signal from an external  
device to the Monitor set. Connect the external  
device and the Monitor set with the DVI cable as  
shown in the following illustration. To transmit an  
audio signal, connect an optional audio cable.  
Back of the product.  
(not included)  
(not included)  
(not included)  
NOTE  
Use a High Speed HDMI™ Cable.  
yy  
High Speed HDMI™ Cables are tested to  
yy  
carry an HD signal up to 1080p and higher.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
50 MAKING CONNECTIONS  
Connecting to a USB  
Connecting to the LAN  
Connect a USB storage device such as s USB  
flash memory, external hard drive, MP3 player or  
a USB memory card reader to the Monitor set and  
access the USB menu to use various multimedia  
files.  
LAN connection  
Using a router(Switch)  
A
LAN  
Switch  
Monitor Set  
PC  
(not included)  
or  
(not included)  
(not included)  
Using the Internet.  
LAN  
B
Network  
Monitor Set  
PC  
(not included)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
MAKING CONNECTIONS 51  
Daisy Chain Monitors  
Use this function to share the RGB video signal with other monitors without having to use a separate signal  
splitter box.  
To use different products connected to each other Connect one end of the signal input cable (15-pin  
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN  
connector of other products.  
RGB Cable  
15-pin D-Sub Signal Cable  
(Max 3m)  
Monitor 1  
Monitor 2  
Monitor 3  
Monitor 4  
DVI Cable  
DVI Cable  
(Max 3m)  
(not included)  
Monitor 1  
Monitor 2  
Monitor 3  
Monitor 4  
NOTE  
When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid  
yy  
signal degradation and cable loss.  
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended  
yy  
resolution) if the signal is stable and there is no cable loss.If you want to connect more than this  
number of monitors, we recommended that you use a distributor.  
When multiple monitors are connected via DVI, the HDCP-encrypted content can be normally played  
yy  
only on the monitor that receives the first signal.(The DVI Out port does not support HDCP.)  
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)  
yy  
booster or DVI (RGB) optical cable.  
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via  
yy  
the DVI Out port.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52 TROUBLESHOOTING  
TROUBLESHOOTING  
No image is displayed  
Problem  
Resolution  
Is the product power cord  
connected?  
See if the power cord is properly connected to the outlet.  
y
Is the power indicator light on?  
See if the power switch is turned on.  
May need service.  
y
y
Power is on but the screen  
appears extremely dark.  
Adjust brightness and contrast again.  
Backlight may need repair.  
y
y
The power indicator amber?  
If the product is in power saving mode, move the mouse or press any  
y
key.  
Turn both devices off and then back on.  
y
y
Does the 'Invalid Format'  
message appear?  
The signal from the PC (video card) is out of the vertical or horizontal  
frequency range of the product. Adjust the frequency range by  
referring to the Specifications in this manual.  
* Maximum resolution  
RGB : 1920 x 1080 @ 60 Hz  
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz  
Does the 'No signal' message  
appear?  
The signal cable between PC and product is not connected. Check  
the signal cable.  
Press the 'INPUT' menu in the remote Control to check the input  
signal.  
y
y
'Unknown Product' message appears when the product is connected.  
Problem  
Resolution  
Did you install the driver?  
See if the plug&play function is supported by referring to the video  
card user manual.  
y
'Key Lock On' message appears.  
Problem  
Resolution  
The 'Key Lock On' message  
appears when pressing the  
Menu button.  
The Lock function prevents the OSD settings from being changed  
inadvertently. To release the lock, go to Menu and Option and disable  
the Key Lock option.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 53  
The screen image looks abnormal.  
Problem  
Resolution  
Is the screen position wrong?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select the optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Position OSD  
menu.  
y
See if the video card resolution and frequency are supported by the  
product. If the frequency is out of range, set to the recommended  
resolution in the Control Panel "Display" Setting menu.  
y
y
Do thin lines appear on the  
background screen?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Clock OSD  
menu.  
Horizontal noise appears or the  
characters look blurred.  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Phase OSD  
menu.  
y
y
The screen is displayed  
abnormally.  
The proper input signal is not connected to the signal port. Connect  
the signal cable that matches with the source input signal.  
After-image appears on the product.  
Problem  
Resolution  
After-image appears when the  
product is turned off.  
If you use a fixed image for a long time, the pixels may be damaged  
quickly. Use the screen-saver function.  
y
The audio function does not work.  
Problem  
Resolution  
No sound?  
See if the audio cable is connected properly.  
Adjust the volume.  
See if the sound is set properly.  
y
y
y
Sound is too dull.  
Sound is too low.  
Select the appropriate equalize sound.  
Adjust the volume.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
54 TROUBLESHOOTING  
Screen color is abnormal.  
Problem  
Resolution  
Screen has poor color resolution  
(16 colors).  
Set the number of colors to more than 24 bits (true color) Select  
Control Panel - Display - Settings - Color Table menu in Windows.  
y
y
y
Screen color is unstable or  
mono-colored.  
Check the connection status of the signal cable. Or, re-insert the PC  
video card.  
Do black spots appear on the  
screen?  
Several pixels (red, green, white or black color) may appear on the  
screen, which can be attributable to the unique characteristics of the  
LCD panel. It is not a malfunction of the LCD.  
The operation does not work normally.  
Problem  
Resolution  
The power suddenly turned off.  
Is the sleep timer set?  
Check the power control settings. Power interrupted.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS 55  
SPECIFICATIONS  
LCD Panel  
Screen Type  
961.5 mm Wide (37.9 inch) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel.  
Visible diagonal size : 961.5 mm  
Pixel Pitch  
0.4845 mm (H) x 0.4845 mm (V)  
Video Signal  
Max. Resolution  
RGB : 1920 x 1080 @ 60 Hz  
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz  
- It may not be supported depending on the OS or video  
card type.  
Recommended Resolution RGB : 1920 x 502 @ 60 Hz  
HDMI/DVI/DP : 1920 x 502 @ 60 Hz  
- It may not be supported depending on the OS or video  
card type.  
Horizontal Frequency  
Vertical Frequency  
Synchronization Type  
RGB : 30 kHz to 68 kHz  
HDMI/DVI/DP : 30kHz to 68 kHz  
RGB : 56 Hz to 75 Hz  
HDMI/DVI/DP : 56 Hz to 60 Hz  
Separate Sync, Composite(AV) Sync, Digital, SOG  
Input Connector  
15-pin D-Sub type (RGB), HDMI/DVI/DP(digital),  
RS-232C, LAN, USB, PC Audio, IR Receiver  
Output Connector  
Power  
RGB, DVI, RS-232C, Speaker Out L/R  
AC 100-240 V~, 50 / 60 Hz 1.3 A  
Rated Voltage  
Power Consumption  
On Mode : 90 W Typ.  
Smart Energy Saving Mode : 80 W Typ.  
Off Mode : ≤ 1 W  
Dimensions  
(Width x Height x  
Depth) / Weight  
* Wall Bracket available VESA  
400 x 200  
H
W
D
973.6 mm X 287.8 mm X 59 mm / 12.5 Kg  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
0 °C to 40 °C  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20 °C to 60 °C  
5 % to 95 %  
* Applicable only for models that support the speakers  
Audio  
RMS Audio Output  
Input Sensitivity  
10 W + 10 W (R + L)  
0.7 Vrms  
Speaker Impedance  
8 Ω  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56 SPECIFICATIONS  
DTV Mode  
Resolution  
RGB (PC) supported mode  
Horizontal  
Resolution  
Vertical  
HDMI  
Display Port  
Frequency(kHz) Frequency(Hz)  
480i  
x
x
o
o
o
o
o
x
x
o
o
o
o
o
31.468  
31.469  
37.879  
49.725  
48.363  
44.772  
47.7  
70.8  
720 x 400  
576i  
59.94  
60.317  
74.55  
60  
640 x 480  
480p  
576p  
720p  
1080i  
1080p  
800 x 600  
832 x 624  
1024 x 768  
1280 x 720  
1366 x 768  
1280 x 1024  
1920 x 502  
1920 x 1080  
59.855  
60  
63.981  
31.25  
60.02  
59.981  
60  
Power Indicator  
Mode  
67.5  
Product  
On Mode  
Sleep Mode  
Off Mode  
Red  
Amber  
-
HDMI/DVI/Display Port(PC) supported mode  
NOTE  
Horizontal  
Frequency(kHz) Frequency(Hz)  
Vertical  
Resolution  
31.469  
37.879  
48.363  
44.772  
47.7  
59.94  
60.317  
60  
640 x 480  
PC resolutions available as the input label  
yy  
option in RGB and HDMI/DVI input mode :  
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920  
x 1080 / 60 Hz and DTV resolutions : 480p,  
720p, 1080p.  
800 x 600  
1024 x 768  
1280 x 720  
1366 x 768  
1280 x 1024  
1920 x 502  
1920 x 1080  
59.855  
60  
63.981  
31.25  
67.5  
60.02  
59.981  
60  
NOTE  
Vertical frequency: To enable the user to  
yy  
watch the product display, screen image  
should be changed tens of times every  
second like a fluorescent lamp. The vertical  
frequency or refresh rate is the times of  
image display per second. The unit is Hz.  
Horizontal frequency: The horizontal interval  
yy  
is the time to display one vertical line. When  
1 is divided by the horizontal interval, the  
number of horizontal lines displayed every  
second can be tabulated as the horizontal  
frequency. The unit is kHz.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IR CODES 57  
IR CODES  
All models do not support the HDMI/USB function.  
yy  
Code (Hexa)  
Function  
Energy Saving (  
POWER  
INPUT  
Note  
95  
)
R/C BUTTON  
R/C BUTTON (ON/OFF)  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
08  
0B  
C4  
C5  
43  
Monitor On  
Monitor Off  
MENU  
40  
Up ( )  
41  
Down ( )  
Left ( )  
07  
06  
Right ( )  
OK( )  
44  
28  
BACK(  
EXIT  
)
5B  
4D  
02  
PSM  
Volume  
Volume  
MUTE  
03  
09  
E0  
E1  
10 to 19  
72  
Bright (Page UP)  
Bright (Page Down)  
Number Key 0 to 9  
Red Key (ID ON)  
Green Key (ID OFF)  
Yellow Key  
71  
63  
61  
Blue Key  
76  
ARC (4:3)  
77  
ARC (16:4)  
79  
ARC (MARK)  
99  
Auto Config.  
B1  
B0  
BA  
8F  
8E  
Download from Www.Somanuals.com. All Manuals Search And Download.  
58 CONTROLLING THE MULTIPLE PRODUCT  
CONTROLLING THE MULTIPLE PRODUCT  
Use this method to connect several products to a single PC. You can control several products at one  
yy  
time by connecting them to a single PC.  
In the Option menu, Set ID must be between 1 and 255 without being duplicated.  
yy  
Connecting the cable  
Connect the RS-232C cable as shown in the picture.  
The RS-232C protocol is used for communication between the PC and product. You can turn the  
yy  
product on/off, select an input source or adjust the OSD menu from your PC.  
RS-232C Cable  
(not included)  
PC  
Monitor Set 1 Monitor Set 2 Monitor Set 3 Monitor Set 4  
RS-232C Configurations  
8-Wire Configurations (Cross-over RS-232C cable)  
NOTE  
PC  
Set  
When using 3-wire connections (non-  
yy  
standard), an IR daisy chain cannot be used.  
DCD  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
CTS  
1
2
3
5
4
6
7
8
1
3
2
5
6
4
8
7
DCD  
TXD  
RXD  
GND  
DSR  
DTR  
CTS  
RTS  
D-Sub 9  
(Female)  
D-Sub 9  
(Female)  
Communication Parameter  
Baud Rate : 9600 buad Rate (UART)  
yy  
Data Length : 8 bit  
yy  
Parity Bit : None  
yy  
Stop Bit : 1bit  
yy  
Flow Control : None  
yy  
Communication Code : ASCII code  
yy  
Use a crossed (reverse) cable  
yy  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 59  
Command reference list  
COMMAND  
DATA  
(Hexadecimal)  
1
2
01. Power  
k
x
k
j
a
00H to 01H  
02. Input Select  
b
c
q
x
g
h
k
i
Refer to ‘02. Input Select’  
Refer to ‘03. Aspect Ratio’  
Refer to ‘04. Energy Saving’  
00H to 04H  
03. Aspect Ratio  
04. Energy Saving  
05. Picture mode  
06. Contrast  
d
k
k
k
k
k
x
f
00H to 64H  
07. Brightness  
00H to 64H  
08. Sharpness  
00H to 64H  
09. Color  
00H to 64H  
10. Tint  
j
00H to 64H  
11. Color Temperature  
12. H Position  
u
q
r
00H to 64H  
00H to 64H  
13. V Position  
f
00H to 64H  
14. H Size  
f
s
u
t
00H to 64H  
15. Auto configuration  
16. Balance  
j
01H  
k
d
k
k
d
k
k
f
00H to 64H  
17. Sound mode  
18. Treble  
y
r
01H to 05H  
00H to 64H  
19. Bass  
s
v
e
f
00H to 64H  
20. Speaker  
00H to 01H  
21. Volume Mute  
22. Volume Control  
23. Time 1(Years/ Months/ Days)  
24. Time 2(Hours/ Minutes/Seconds)  
25. Off Timer(Repeat mode/ Time)  
26. On Timer(Repeat Mode/ Time)  
27. On Timer Input  
28. Sleep Time  
00H to 01H  
00H to 64H  
a
x
e
d
u
f
Refer to ‘23. Time 1’  
Refer to ‘24. Time 2’  
Refer to ‘25. Off Timer’  
Refer to ‘26. On Timer’  
Refer to ‘27. On Timer Input’  
00H to 08H  
f
f
f
f
f
29. Power On Delay  
30. Automatic Standby  
31. Auto Off  
f
h
n
g
i
00H to 64H  
m
f
00H to 01H  
00H to 01H  
32. Language  
f
Refer to ‘32. Language’  
00H to 01H  
33. Power Indicator(Standby Light)  
34. Power Indicator(Power Light)  
35. ISM mode  
f
o
p
p
i
f
00H to 01H  
j
Refer to ‘35. ISM Method’  
00H to 02H  
36. Fail Over Select  
m
Download from Www.Somanuals.com. All Manuals Search And Download.  
60 CONTROLLING THE MULTIPLE PRODUCT  
COMMAND  
DATA  
(Hexadecimal)  
1
m
f
2
j
37. Fail Over Input Select  
38. Reset  
Refer to ‘37. Fail Over Input Select’  
00H to 03H  
00H to 01H  
FFH  
k
j
39. DPM Select  
f
40. Temperature Value  
41. Remote Lock/ key Lock  
42. Key  
d
k
m
k
d
f
n
m
c
l
00H to 01H  
Refer to ‘42. Key’  
00H to 01H  
FFH  
43. OSD Select  
44. Elapsed time return  
45. Serial No. Check  
46. S/W Version  
l
y
z
m
n
o
g
FFH  
f
FFH  
47. White Balance Red Gain  
48. White Balance Green Gain  
49. White Balance Blue Gain  
50. Backlight  
j
00H to FEH  
00H to FEH  
00H to FEH  
00H to 64H  
j
j
m
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are  
yy  
not executed and treated as NG.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 61  
Transmission / Receiving protocol  
Transmission  
[Command1][Command2][ ][Set ID][ ][Data][Cr] or  
[Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
* [Command1]: First command to control the set.  
* [Command2]: Second command to control the set.  
* [Set ID]: Set ID with which you want to communicate. Etner [Set ID] = ‘00(0x00’ to communicate with all  
sets regardless of their Set ID numbers.  
* [Data]: Information passed to the set.  
* [Data1]: Information passed to the set.  
* [Data2]: Information passed to the set.  
* [Data3]: Information passed to the set.  
* [Cr]: Carriage Return. ASCII code ‘0x0D’.  
* [ ]: ASCII code space ‘0x20’  
Acknowledgement  
[Command2][ ][Set ID][ ][OK/NG][Data][x] or  
[Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data  
feedback presents status about each function.  
* Note : In this mode, display will send the acknowledgement after power on processing completion.  
There might be a time delay between command and acknowledgement.  
* No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62 CONTROLLING THE MULTIPLE PRODUCT  
01. Power (Command: k a)  
04. Energy Saving (Command: j q)  
To control power On/Off the display.  
To control the energy saving function.  
Transmission  
Transmission  
[k][a][ ][Set ID][ ][Data][Cr]  
[j][q][ ][Set ID][ ][Data][Cr]  
Data 00 : Power Off  
01 : Power On  
Data 00: Off  
01: Minimum  
02: Medium  
FF : Check status  
03. Maximum  
05. Screen Off  
Acknowledgement  
[a][ ][Set ID][ ][OK/NG][Data][x]  
* In a like manner, if other functions transmit ‘FF’  
data based on this format, Acknowledgement data  
feedback presents status about each function.  
* Note: In this modes, display will send the  
acknowledgement after power on processing  
completion. There might be a time delay between  
command and acknowledgement.  
Acknowledgement  
[q][ ][Set ID][ ][OK/NG][Data][x]  
* There might be some time delays between  
command and acknowledgement.  
05. Picture Mode (Command: d x)  
02. Input Select (Command: x b)  
To select the picture mode.  
To select input source for display.  
Transmission  
Transmission  
[d][x][ ][Set ID][ ][Data][x]  
[x][b][ ][Set ID][ ][Data][Cr]  
Data 00: Vivid  
01: Standard  
02. Cinema  
03. Sport  
Data 60: RGB PC  
70: DVI-D  
90: HDMI(DTV)  
A0: HDMI(PC)  
04: Game  
C0: Display Port(DTV)  
D0: Display Port(PC)  
Acknowledgement  
[x][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[b][ ][Set ID][ ][OK/NG][Data][x]  
03. Aspect Ratio (Command: k c)  
To adjust the screen format.  
06. Contrast (Command: k g)  
Transmission  
To adjust screen contrast.  
[k][c][ ][Set ID][ ][Data][Cr]  
Transmission  
Data 01: 4:3  
[k][g][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Contrast 0 to 100  
09: Just scan(720p or more)  
(HDMI/Display Port DTV)  
* RGB, DVI-D, HDMI/ Display Port PC mode  
(1:1)  
Acknowledgement  
27: Top  
29: 16:4  
[g][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[c][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 63  
07. Brightness (Command: k h)  
10. Tint (Command: k j) (Video input only)  
To adjust screen brightness.  
To adjust screen tint.  
Transmission  
Transmission  
[k][h][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Brightness 0 to 100  
[k][j][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Tint 0 to 100(R50 to G50)  
Acknowledgement  
Acknowledgement  
[h][ ][Set ID][ ][OK/NG][Data][x]  
[j][ ][Set ID][ ][OK/NG][Data][x]  
08. Sharpness (Command: k k) (Video input only)  
11. Color Temperature (Command: x u)  
To adjust screen sharpness.  
To adjust color temperature.  
Transmission  
Transmission  
[k][k][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Sharpness 0 to 100  
[x][u][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Warm 50 to Cool 50  
Acknowledgement  
Acknowledgement  
[k][ ][Set ID][ ][OK/NG][Data][x]  
[u][ ][Set ID][ ][OK/NG][Data][x]  
09. Color (Command: k i) (Video input only)  
12. H Position (Command: f q)  
To set the Horizontal position.  
* The operational range varies depending on the  
RGB input resolution.  
To adjust screen color.  
Transmission  
[k][i][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Color 0 to 100  
* Only available for RGB input.  
Transmission  
[f][q][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Left -50 to Right 50  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[q][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
64 CONTROLLING THE MULTIPLE PRODUCT  
13. V Position (Command: f r)  
To set the Vertical position.  
16. Balance (Command: k t)  
To adjust balance.  
* The operational range varies depending on the  
RGB input resolution.  
* Only available for RGB input.  
Transmission  
[k][t][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Left 50 to Right 50  
Transmission  
[f][r][ ][Set ID][ ][Data][Cr]  
"0 - 64: min. -50 (bottom) to max. 50 (top)  
Acknowledgement  
[t][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[r][ ][Set ID][ ][OK/NG][Data][x]  
17. Sound Mode (Command: d y)  
14. H Size (Command: f s)  
To select the sound mode.  
To set the Horizontal size.  
* The operational range varies depending on the  
RGB input resolution.  
Transmission  
[d][y][ ][Set ID][ ][Data][x]  
* Only available for RGB input.  
Data 01: Standard  
02: Music  
Transmission  
03: Cinema  
04: Sport  
05. Game  
[f][s][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Size -50 to 50  
Acknowledgement  
Acknowledgement  
[s][ ][Set ID][ ][OK/NG][Data][x]  
[y][ ][Set ID][ ][OK/NG][Data][x]  
18. Treble (Command: k r)  
15. Auto Configuration (Command: j u)  
To adjust picture position and minimize image  
shaking automatically.  
To adjust treble.  
Transmission  
* Only available for RGB input.  
[k][r][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Treble 0 to 100  
Transmission  
[j][u][ ][Set ID][ ][Data][Cr]  
Data 01 : Set  
Acknowledgement  
[r][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[u][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 65  
19. Bass (Command: k s)  
22. Volume Control (Command: k f)  
To adjust bass.  
To adjust volume.  
Transmission  
Transmission  
[k][s][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Bass 0 to 100  
[k][f][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Volume 0 to 100  
Acknowledgement  
Acknowledgement  
[f][ ][Set ID][ ][OK/NG][Data][x]  
[s][ ][Set ID][ ][OK/NG][Data][x]  
23. Time 1(Year/ Month/ Day) (Command: f a)  
20. Speaker (Command: d v)  
To set the Time 1(Year/ Month/ Day) values.  
To select speaker on/off.  
Transmission  
Transmission  
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
[d][v][ ][Set ID][ ][Data][x]  
Data 1 00 to 14: 2010 to 2030  
Data 2 01 to 0C: January to December  
Data 3 01 to 1F: 1 to 31  
Data 00: Speaker Off  
01: Speaker On  
* Enter “fa [Set ID] ff” for checking Time 1(Year/  
Month/ Day) values.  
Acknowledgement  
[v][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
21. Volume Mute (Command: k e)  
24. Time 2(Hour/ Minute/ Second) (Command: f x)  
To select screen mute on/off.  
To set the Time 2(Hour/ Minute/ Second) values.  
Transmission  
Transmission  
[k][e][ ][Set ID][ ][Data][Cr]  
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
Data 00 : Volume Mute On (Volume Off)  
01 : Volume Mute Off (Volume On)  
Data1 00 to 17: 00 to 23 hours  
Data2 00 to 3B: 00 to 59 minutes  
Data3 00 to 3B: 00 to 59 seconds  
* Enter “fx [Set ID] ff” for checking Time 2(Hour/  
Minute/ Second) values.  
** This command won’t work if Time 1(Year/ Month/  
Day) has not been set in advance.  
Acknowledgement  
[e][ ][Set ID][ ][OK/NG][Data][x]  
Data 00 : Volume Mute On (Volume Off)  
01 : Volume Mute Off (Volume On)  
Acknowledgement  
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 CONTROLLING THE MULTIPLE PRODUCT  
25. Off Timer(Repeat Mode/ Time) (Command: f e)  
27. On Timer Input (Command: f u)  
To set the Off Timer(Repeat mode/ Time) function.  
To set the On Timer Input function.  
Transmission  
Transmission  
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
[f][u][ ][Set ID][ ][Data][Cr]  
Data1 00: Repeat Off  
Data 60. RGB  
01: Repeat Once  
90: HDMI  
02. Repeat Daily  
70: DVI  
03: Repeat from Monday to Friday  
04: Repeat from Monday to Saturday  
05: Repeat from Saturday to Sunday  
06. Repeat on Sunday  
* Check if Time 1(Year/ Month/ Day) and Time  
2(Hour/ Minute/ Second) and On Timer(Repeat  
Mode/Time) functions have been set before setting  
this function.  
Data2 00 to 17: 00 to 23 Hours  
Data3 00 to 3B: 00 to 59 Minutes  
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat  
mode/ Time) values.  
Acknowledgement  
[u][ ][Set ID][ ][OK/NG][Data][x]  
* Check if Time 1(Year/ Month/ Day) and Time  
2(Hour/ Minute/ Second) have been set before  
setting this function.  
Acknowledgement  
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
28. Sleep Time (Command: f f)  
To set sleep time.  
Transmission  
[f][f][ ][Set ID][ ][Data][Cr]  
Data 00: Off  
01: 10 min.  
02: 20 min.  
03: 30 min.  
04: 60 min.  
05: 90 min.  
06: 120 min.  
07: 180 min.  
08: 240 min.  
26. On Timer(Repeat Mode/ Time) (Command: f d)  
To set the On Timer(Repeat mode/ Time) function.  
Transmission  
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
Acknowledgement  
Data1 00: Repeat Off  
[f][ ][Set ID][ ][OK/NG][Data][x]  
01: Repeat Once  
02. Repeat Daily  
03: Repeat from Monday to Friday  
04: Repeat from Monday to Saturday  
05: Repeat from Saturday to Sunday  
06. Repeat on Sunday  
Data2 00 to 17: 00 to 23 Hours  
Data3 00 to 3B: 00 to 59 Minutes  
* Enter “fd [Set ID] ff” for checking On Timer(Repeat  
mode/ Time) values.  
* Check if Time 1(Year/ Month/ Day) and Time  
2(Hour/ Minute/ Second) have been set before  
setting this function.  
29. Power On Delay (Command: f h)  
To set the schedule delay when the power is turned  
on(unit: second).  
Transmission  
[f][h][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: 0 to 100sec.  
Acknowledgement  
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
Acknowledgement  
[h][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 67  
30. Automatic Standby (Command: m n)  
33. Power Indicator(Standby Light) (Command: f o)  
To set the Automatic Standby function.  
To set the Power Indicator(Standby Light) function.  
Transmission  
Transmission  
[m][n][ ][Set ID][ ][Data][Cr]  
[f][o][ ][Set ID][ ][Data][Cr]  
Data 00: Automatic Standby Off  
01: Automatic Standby On(4hours)  
Data 00: Standby Light Off  
01: Standby Light On  
Acknowledgement  
Acknowledgement  
[n][ ][Set ID][ ][OK/NG][Data][x]  
[o][ ][Set ID][ ][OK/NG][Data][x]  
31. Auto Off (Command: f g)  
To set the Auto Off function.  
Transmission  
[f][g][ ][Set ID][ ][Data][Cr]  
34. Power Indicator(Power Light) (Command: f p)  
Data 00: Auto Off Off  
To set the Power Indicator(Power Light) function.  
01: Auto Off On(15 min.)  
Transmission  
[f][p][ ][Set ID][ ][Data][Cr]  
Acknowledgement  
Data 00: Power Light Off  
01: Power Light On  
[g][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[p][ ][Set ID][ ][OK/NG][Data][x]  
32. Language (Command: f i)  
To set language for OSD.  
Transmission  
[f][i][ ][Set ID][ ][Data][Cr]  
Data 00: Czech  
01: Danish  
02: German  
03: English  
04: Spanish(EU)  
05: Greek  
06: French  
07: Italian  
08: Dutch  
09: Norwegian  
0A: Portuguese  
0B: Protuguese(BR)  
0C: Russian  
35. ISM mode (Command: j p)  
To select ISM method for avoiding having a fixed  
image remain on screen.  
Transmission  
[j][p][ ][Set ID][ ][Data][Cr]  
Data 01: Inversion  
02: Orbiter  
04: White Wash  
08. Normal  
0D: Finnish  
0E: Swedish  
0F: Korean  
Acknowledgement  
10: Chinese (Mandarin)  
11: Japanese  
12: Yue Chinese(Cantonese)  
[p][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
68 CONTROLLING THE MULTIPLE PRODUCT  
36. Fail Over Select (Command: m i)  
38. Reset (Command: f k)  
To set the Fail Over function.  
To execute the Picture, Screen, Audio and Factory  
reset function.  
Transmission  
Transmission  
[m][i][ ][Set ID][ ][Data][Cr]  
[f][k][ ][Set ID][ ][Data][Cr]  
Data 00: Off  
01: Auto  
Data 00: Picture Reset  
01: Screen Reset (Only available for RGB  
input.)  
02: Manual  
Acknowledgement  
02: Factory Reset  
03: Audio Reset  
[i][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[k][ ][Set ID][ ][OK/NG][Data][x]  
39. DPM Select (Command: f j)  
To set the DPM (Display Power Management)  
function.  
37. Fail Over Input Select (Command: m j)  
To select fail over mode.  
*Only available in Fail Over manual mode.  
Transmission  
Transmission  
[f][j][ ][Set ID][ ][Data][x]  
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
[ ][Data4][Cr]  
Data 00: DPM Select Off  
01: DPM Select On  
Data 1 to 4(Priority 1 to 4)  
60: RGB  
Acknowledgement  
70: DVI-D*  
90: HDMI**  
[j][ ][Set ID][ ][OK/NG][Data][x]  
C0: Display Port***  
* Use 0x70 as data for DVI-D input, regardless DVI-  
D(PC) or DVI-D(DTV).  
** Use 0x90 as data for HDMI input, regardless  
HDMI-DTV or HDMI-PC  
*** Use 0xC0 as data for Display Port input,  
Regardless Display Port(DTV) or Display Port(PC)  
Acknowledgement  
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4]  
[x]  
40. Temperature Value (Command: d n)  
Data 1 to 4(Priority 1 to 4)  
To read the inside temperature of the display.  
60: RGB  
Transmission  
70: DVI-D****  
90: HDMI*****  
[d][n][ ][Set ID][ ][Data][Cr]  
C0: Display Port******  
**** Returns 0x70 as Data for DVI-D port, regardless  
DVI-D(PC) or DVI-D(DTV).  
***** Returns 0x90 as Data for HDMI port, regardless  
HDMI-DTV or HDMI-PC.  
Data FF: Data should be always ff in hexadecimal.  
Acknowledgement  
[n][ ][Set ID][ ][OK/NG][Data][x]  
****** Returns 0xC0 as Data for Display Port,  
regardless Display Port(DTV) or Display Port(PC).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLLING THE MULTIPLE PRODUCT 69  
41. Remote Controller Lock/ Key Lock  
(Command: k m)  
44. Elapsed time return (Command: d l)  
To read the panel used time.  
To lock the remote control and the front panel control  
keys on the display.  
Transmission  
[d][l][ ][Set ID][ ][Data][x]  
Transmission  
Data FF: Data should be always ff in hexadecimal.  
[k][m][ ][Set ID][ ][Data][Cr]  
Data 00: Lock off  
Acknowledgement  
01: Lock on  
[l][ ][Set ID][ ][OK/NG][Data][x]  
* If you are intended not to use the remote controller  
and front panel control keys on the display for kind of  
reasons, use this mode. Remote controller Lock/ Key  
Lock will be released automatically after display is  
rebooted.  
* Returned data means used hours in hexadecimal.  
* Display will not be turned on by power on key of  
remote controller and front panel control keys, if key  
is locked on in standby mode.  
Acknowledgement  
[m][ ][Set ID][ ][OK/NG][Data][x]  
42. Key (Command: m c)  
45. Serial No.Check (Command: f y)  
To send IR remote control code.  
To read the serial numbers.  
Transmission  
Transmission  
[m][c][ ][Set ID][ ][Data][Cr]  
Data IR_KEY_CODE  
[f][y][ ][Set ID][ ][Data][Cr]  
Data FF: Data should be always ff in hexadecimal.  
Acknowledgement  
Acknowledgement  
[c][ ][Set ID][ ][OK][Data][x]  
[y][ ][Set ID][ ][OK/NG][Data][x]  
When display is in the standby mode, display will turn  
on by Power button of remote control only.  
43. OSD Select (Command: k l)  
46. S/W Version (Command: f z)  
To select OSD(On Screen Display) on/off  
To read the software version.  
Transmission  
Transmission  
[k][l][ ][Set ID][ ][Data][Cr]  
[f][z][ ][Set ID][ ][Data][Cr]  
Data 00: OSD Off  
01: OSD On  
Data FF: Data should be always ff in hexadecimal.  
Acknowledgement  
Acknowledgement  
[z][ ][Set ID][ ][OK/NG][Data][x]  
[l][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70 CONTROLLING THE MULTIPLE PRODUCT  
47. White Balance Red Gain (Command: j m)  
50. Backlight (Command: m g)  
To adjust white balance red gain.  
To adjust screen backlight.  
Transmission  
Transmission  
[j][m][ ][Set ID][ ][Data][Cr]  
Data 00 to FE: Red gain 0 to 254  
[m][g][ ][Set ID][ ][Data][Cr]  
Data 00 to 64: Backlight 0 to 100  
Acknowledgement  
Acknowledgement  
[m][ ][Set ID][ ][OK/NG][Data][x]  
[g][][set ID][][OK/NG][Data][x]  
48. White Balance Green Gain (Command: j n)  
To adjust white balance green gain.  
Transmission  
[j][n][ ][Set ID][ ][Data][Cr]  
Data 00 to FE: Green gain 0 to 254  
Acknowledgement  
[n][ ][Set ID][ ][OK/NG][Data][x]  
49. White Balance Blue Gain (Command: j o)  
To adjust white balance blue gain.  
Transmission  
[j][o][ ][Set ID][ ][Data][Cr]  
Data 00 to FE: Blue gain 0 to 254  
Acknowledgement  
[o][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To obtain the source code under GPL, LGPL,  
MPL and other open source licenses, that is  
contained in this product, please visit http://  
opensource.lge.com.  
In addition to the source code, all referred  
license terms, warranty disclaimers and  
copyright notices are available for download.  
LG Electronics will also provide open source  
code to you on CD-ROM for a charge covering  
the cost of performing such distribution (such  
as the cost of media, shipping and handling)  
upon email request to [email protected].  
This offer is valid for three (3) years from the  
date on which you purchased the product.  
Make sure to read the Safety Precautions  
before using the product.  
Keep the Owner's Manual(CD) in an accessible  
place for future reference.  
ENERGY STAR is a set of power-  
saving guidelines issued by the U.S.  
Environmental Protection Agency(EPA).  
The model and serial number of the SET is  
located on the back and one side of the SET.  
Record it below should you ever need service.  
As an ENERGY STAR Partner LGE U. S. A.,Inc. has  
determined that this product meets the ENERGY  
STAR guidelines for energy efficiency.  
MODEL  
SERIAL  
Temporary noise is normal when powering ON or  
OFF this device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krell Industries Stereo Amplifier WCES 2005 User Manual
Land Pride Lawn Mower ZXT54 Pro User Manual
LG Electronics Dehumidifier 115V User Manual
LG Electronics Flat Panel Television 19 22 26LV25 User Manual
Lightolier Indoor Furnishings 1004ICVN User Manual
Makita Saw 2704X1 User Manual
Marantz Home Theater System SR6005 User Manual
Marmitek Network Router GIGAVIDEO80 User Manual
Marshall electronic Computer Monitor V R84DP 2SDI User Manual
Memorex MP3 Player MD6888 User Manual