DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 1
DN898
For service/
support Call:
Toll Free Number
1-800-243-0000
(http://us.lgservice.com)
© Copyright 2008, LG Electronics U.S.A., Inc.
P/No. : MFL41090959
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 3
IMPORTANT SAFETY INSTRUCTIONS
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provid-
ed plug does not fit into your outlet, consult an electrician for replace-
ment of the obsolete outlet.
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE
MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR
FUTURE REFERENCE.
This product has been designed and manufactured to assure personal safety.
Improper use can result in electric shock or fire hazard. The safeguards incor-
porated in this product will protect you if you observe the following procedures
for installation, use, and servicing.
10. Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
This product does not contain any parts that can be repaired by the user.
11. Only use attachments/accessories specified by the manufacturer.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with apparatus. When a cart is used, use cau-
tion when moving the cart/product combination to avoid injury from
tip-over.
1. Read these instructions. - All these safety and operating instructions
should be read before the product is operated.
2. Keep these instructions. - The safety, operating and use instructions
should be retained for future reference.
3. Heed all warnings. - All warnings on the product and in the operating
instructions should be adhered to.
4. Follow all instructions. - All operating and use instructions should be fol-
lowed.
5. Do not use this apparatus near water. – For example: near a bath tub,
wash bowl, kitchen sink, laundry tub, in a wet basement; or near a swim-
ming pool; and other areas located near water.
13. Unplug this apparatus during lightning storms or when unused for
long periods of time.
6. Clean only with dry cloth. – Unplug this product from the wall outlet before
cleaning. Do not use liquid cleaners.
14. Refer all servicing to qualified service personnel. Servicing is required
when the product has been damaged in any way, such as power-sup-
ply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the product has been exposed to rain or
moisture, does not operate normally, or has been dropped.
7. Do not block any ventilation openings. Install in accordance with the manu-
facturer’s instructions. - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to protect it from
over- heating. The openings should never be blocked by placing the product on
a bed, sofa, rug or other similar surface. This product should not be placed in a
built-in installation such as a bookcase or rack unless proper ventilation is pro-
vided or the manufacturer’s instructions have been adhered to.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 4
About the
Symbol Display
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Types of Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Hooking up the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Adjust the settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10
Displaying Disc Information . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11-12
Playing a MPEG4 movie file . . . . . . . . . . . . . . . . . . . . . . . .12-13
Listening to Music Disc or files . . . . . . . . . . . . . . . . . . . . . . . . .13
Viewing photo files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-14
Using a USB Flash Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Language Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
“
” may appear on your TV display during operation and indicates that the
function explained in this owner’s manual is not available on that disc.
Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play
only DVD discs labeled same as the rear of the unit or “ALL”.
•
Most DVD discs have a globe with one or more numbers in it clearly visible
on the cover. This number must match your unit’s regional code or the disc
cannot play.
•
If you try to play a DVD with a different regional code from your player, the
message “Check Regional Code” appears on the TV screen.
Copyrights
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in
public, or rent copyrighted material without permission. This product features
the copy protection function developed by Macrovision. Copy protection signals
are recorded on some discs. When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection
technology that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
Types of Playable Discs
Logo
Type
DVD-VIDEO: Discs such as movies that can be
purchased or rented.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVI-
SION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPAT-
IBILITY WITH THIS MODEL 525p UNIT, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
DVD-RW: VR mode
Audio CD: Music CDs or CD-R/CD-RW in music CD
format that can be purchased.
This unit plays DVD R/RW and CD-R/RW that contains audio titles, MP3, WMA
and/or JPEG files. Some DVD RW/DVD R or CD-RW/CD-R cannot be played
on this unit due to the recording quality or physical condition of the disc, or the
characteristics of the recording device and authoring software.
Manufactured under license from Dolby Laboratories. “Dolby”and the
double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI licensing LLC.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 5
Hooking up the unit - more you can do
Hooking up the unit
S-Video connection
A
Audio and Video Connection
Connect the S-VIDEO OUTPUT jack on the unit to the corresponding input
jacks on your TV using a S-Video cable.
You will still need to connect the left and right audio cables to the TV, or
digital audio cable to your stereo.
The unit Audio/Video jacks are color coded (yellow for video, red for right audio
and white for left audio). If your TV has only one input for audio (mono),
connect it to the left (white) audio jack on the unit.
Component Video Connections
B
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the
unit to the corresponding input jacks on your TV using a YPbPr cable.
•
You will still need to connect the left and right audio cables to the TV, or
digital audio cable to your stereo.
Resolution Setting
•
•
•
You can change the resolution for component video output. Press
RESOLUTION repeatedly to select the desired resolution - 480i,
480p, 720p, 1080i, 1080p.
For 720p and 1080p resolution on the component video output, only
non-copy protected discs can be played back. If the disc is copy
proteced,it will be displayed at the 480p resolution.
Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly until the picture re-appears.
C
Digital Audio Output Connection
C
Connect one of the unit’s DIGITAL AUDIO OUTPUT (OPTICAL or COAXIAL)
jacks to the corresponding jack on your amplifier.
•
If the audio format of the digital output does not match the capabilities of
your amplifier, the amplifier will produce a strong, distorted sound or no
sound at all.
•
•
To see the audio format of the current disc in the on-screen display, press
AUDIO.
This unit does not perform internal (2 channel) decoding of a DTS sound
track. To enjoy DTS multi channel surround, you must connect this unit to
a DTS compatible amplifier via one of this unit’s digital audio outputs
Connect the AC
power cord into the
power outlet.
A
B
C
5
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 6
About HDMI
Hooking up the unit
HDMI (High Definition Multimedia Interface) supports both video and audio on a
single digital connection for use with DVD Players, Set-Top Boxes, and other AV
devices. HDMI was developed to provide the technologies of HDCP (High-band-
width Digital Content Protection). HDCP is used to protect digital content
transmitted and received.
HDMI Connection
Connect the HDMI OUTPUT jack on the unit to the HDMI input jack on an
HDMI compatible TV using an HDMI cable.
HDMI has the capability to support standard, enhanced or high-definition video
plus standard to multi-channel surround-sound audio, HDMI features include
uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one
connector (instead of several cables and connectors), and communication
between the AV source and AV devices such as DTVs.
Notes on HDMI connection
•
If your TV is not capable of handling 96 kHz sampling frequency, set the
[Sampling Freq.] option to [48 kHz] on the setup menu (See page 9).
If your TV is not equipped with Dolby Digital and MPEG decoder, set the
[Dolby Digital] and [MPEG] options to [PCM] on the setup menu
(See page 9).
•
•
•
•
Depending on your TV, some of the resolution settings may result in the
picture disappearing or an abnormal picture appearing. In this case, press
RESOLUTION repeatedly unit the picture re-appears.
Changing the resolution when the unit is connected with HDMI connector
may result in malfunctions. To solve the problem, turn off the unit and then
turn it on again.
When you connect a HDMI or DVI compatible device make sure of the
following:
- Try switching off the HDMI/DVI device and this unit. Next, switch on the
HDMI/DVI device and leave it for around 30 seconds, then switch on this
unit.
- The connected device’s video input is set correctly for this unit.
- The connected device is compatible with 720x480i, 720x480p, 1280x720p,
1920x1080i or 1920x1080p video input.
Hooking up the unit - more you can do
Resolution Setting
You can change the resolution for HDMI output. Press RESOLUTION repeated-
ly to select the desired resolution - 480i, 480p, 720p, 1080i, 1080p.
- The 1080p, 720p and 480p resolutions are the progressive scan applied
resolution
•
Not all HDCP-compatible DVI devices will work with this unit.
- The picture will not be displayed properly with non-HDCP device.
Note for 1080p resolution
The unit is able to provide a 1080p full HD image to most 1080p-capable TVs in
the market today. However, there are some 1080p TVs available from certain
companies that are limited in the types of 1080p images that can be accepted.
Specifically, 1080p-capable TVs that don’t accept images in 60Hz can’t display
an image from this unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 7
Remote control
REPEAT : Repeats a chapter, track, title or all.
A-B : Repeats a section.
RESOLUTION : Sets the output resolution for HDMI
jack.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ a ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
POWER (1) : Switches the unit ON or OFF.
OPEN/CLOSE (Z) : Opens and closes the disc tray.
Numerical buttons: Selects numbered items in a
menu.
: Button is not available.
CLEAR : Removes a track number on the Program
List or a mark on the Marker Search menu.
TV : TV control buttons.
a
Controlling other TV’s with the remote control
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote
control. While holding down TV POWER button, press
the number buttons to select the manufacturer code
for your TV (see the table below). Release TV
POWER button.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ b ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
SCAN (m / M) : Search backward or forward.
SKIP (. / >) : Go to next or previous
chapter/track.
PAUSE/STEP (X) : Pauses playback
temporarily/press repeatedly for frame-by-frame play-
back.
PLAY (N) : Starts playback.
STOP (x) : Stops playback.
Code numbers of controllable TVs
b
c
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV. Depending on your TV, some or all but-
tons may not function on the TV, even after entering
the correct manufacturer code.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ c ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
DVD MENU : Access the DVD menu.
TITLE : Access the disc’s title menu, if available.
vV b B : Navigates the menus.
Manufacturer
LG/GoldStar
Zenith
Code Number
1 (Default), 2
1, 3, 4
6, 7
8, 9
4
ENTER ( ) : Confirms menu selection.
Samsung
Sony
DISPLAY : Accesses On-Screen Display.
RETURN (O) : Press to move backwards in the
menu or exit the menu. Change the USB mode.
Hitachi
AUDIO (
) : Selects an audio language or audio
channel.
Put the battery into the Remote Control
Remove the battery cover on the rear of Remote
Control, and insert battery (size AAA) with + and –
matched correctly.
SUBTITLE (
) : Selects a subtitle language.
d
ANGLE (
able.
) : Selects a DVD camera angle, if avail-
SETUP : Accesses or exits the setup menu.
ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ d ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ
MARKER : Marks any point during playback.
SEARCH : Displays MARKER SEARCH menu.
PROGRAM : Enters the program edit mode.
ZOOM : Enlarges video image.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 8
Main Unit
a
b
c
d
e
f
g
a 1/I (Power)
f USB Port
Turn the unit ON or OFF.
Connect a USB Flash Drive.
b Disc Tray
g • N (Play)
Insert a disc here.
c Z (Open / Close)
Starts playback.
• x (Stop)
Stops playback.
Opens or closes the disc tray.
• . (Skip)
d Display window
Returns to the beginning of current chapter or track or go to
the previous chapter or track.
Shows the current status of the unit.
• > (Skip)
e Remote sensor
Go to next chapter or track.
Point the remote control here.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 9
Adjust the display settings
Adjust the settings
TV Aspect – Select which screen aspect to use based on the shape of your TV
screen.
ON REMOTE
[4:3]: Select when a standard 4:3 TV is connected.
[16:9]: Select when a 16:9 wide TV is connected.
1 Display setup menu:
SETUP
2 Select a desired option on the first level:
3 Move to second level:
v V
B
Display Mode – If you selected 4:3, you’ll need to define how you would like
widescreen programs and films to be displayed on your TV screen.
4 Select a desired option on the second level: v V
[Letterbox]: This displays a widescreen picture with black bands at the top
and bottom of the screen.
[Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
5 Move to third level:
6 Change the setting:
B
v V / ENTER
Adjust the audio settings
Dolby Digital / DTS / MPEG – Selects the type of digital audio signal when
using the DIGITAL AUDIO OUTPUT jack.
Adjust the settings - more you can do
When you turn on for the first time
[Bitstream]: Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG
decoder.
[PCM] (for Dolby Digital / MPEG): Select this when you connect this unit’s
DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital
or MPEG decoder.
The menu for a language selection will appear when you turn on the unit for the
first time. You must select a language to use the unit. Use vV b B to select a
language then press ENTER and the confirm menu will appear. Use b B to
select [Enter] then press ENTER.
[Off] (for DTS): Select this when you connect this unit’s DIGITAL AUDIO
OUTPUT jack to an amplifier without a built-in DTS decoder.
Adjust the language settings
Menu Language – Select a language for the Setup menu and on-screen
display.
Sample Freq. (Frequency) – Selects the sampling frequency of the audio
signal.
Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/
[48 KHz]: The audio signals are always converted to 48 kHz.
[96 KHz]: The audio signals are output in their original format.
Menu.
[Original]: Refers to the original language in which the disc was recorded.
[Other]: To select another language, press number buttons then ENTER to
enter the corresponding 4-digit number according to the language code list.
(see page 15) If you make a mistake while entering number, press CLEAR to
delete numbers then correct it.
DRC (Dynamic Range Control) – Make the sound clear when the volume is
turned down (Dolby Digital only). Set to [On] for this effect.
Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The
karaoke channels on the disc, mix into normal stereo sound.
[Off] (for Disc Subtitle): Turn off Subtitle.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 10
Adjust the lock settings
Displaying Disc Information
You must set the [Area Code] option to use the lock options. Select [Area Code]
option then press B. Enter a 4-digit password then press ENTER. Enter it again
then press ENTER to verify. If you make a mistake while entering number, press
CLEAR then correct it.
ON REMOTE
1 Press DISPLAY:
DISPLAY
v V
If you forget your password you can reset it. Display setup menu then input the
6-digit number “210499”. The “P CLr” will appear in the display window and the
password is deleted.
Rating – Select a rating level. The lower the level, the stricter the rating. Select
[Unlock] to deactivate the rating.
2 Select a item:
3 Adjust the Display menu settings:
4 To return the exit:
b B / ENTER
DISPLAY
Password – Sets or changes the password for lock settings.
[New]: Enter a new 4-digits password using the numerical buttons then press
ENTER. Enter the password again to confirm.
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by
[Change]: Enter the new password twice after entering the current password.
pressing b B.
Area Code – Select a code for a geographic area as the playback rating level.
This determines which area’s standards are used to rate DVDs controlled by the
parental lock. (See page 15)
Current title (or track) number/total number of titles (or tracks)
Current chapter number/total number of chapters
Elapsed playing time
Adjust the others settings
Selected audio language or channel
B.L.E. (Black Level Expansion) – To select the black level of playback
pictures. Set your preference and monitor’s ability.
Selected subtitle
Selected angle/total number of angles
Symbol Used in this Manual
ALL
DVD
ACD
CD-G
WMA
All discs and file listed below
DVD and finalized DVD R/RW
MP3 files
Audio CDs
CD-G discs
MP3
WMA files
MPEG4
MPEG4 files
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 11
ALL
Pause a playback
Playing a Disc
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue
playback.
ON REMOTE
DVD
MPEG4
Frame-by-Frame playback
1 Open the disc tray:
2 Insert a Disc:
Z
-
OPEN/CLOSE
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
ALL
Playing repeatedly
3 Close the disc tray:
4 Start playback:
Z
N
x
OPEN/CLOSE
PLAY
Press REPEAT repeatedly to select an item to be repeated. The current title,
chapter or track will be played back repeatedly. To return to normal playback,
press REPEAT repeatedly to select [Off].
5 To stop playback:
STOP
DVD
MPEG4
ACD
WMA
MP3
Fast forward or fast reverse
Playing a Disc - more you can do
Press SCAN (m or M) to play fast forward or fast reverse during playback.
You can change the various playback speed by pressing SCAN (m or M)
repeatedly. Press PLAY ( N) to continue play at normal speed.
Stops the playback
The unit records the stopped point depending on the disc. “ Xx ” appears on
the screen briefly. Press PLAY ( N) to resume playback (from the scene
point). If you press STOP (x ) again or unload the disc (“ x ” appears on the
screen), the unit will clear the stopped point.
(Xx =Resume Stop, x =Complete Stop) The resume point may be cleared
when a button is pressed (for example :POWER, OPEN/CLOSE, etc).
DVD
MPEG4
ACD
Repeating a specific portion (A-B)
Press A-B at the beginning of the portion you wish to repeat and again at the
end of the portion. Your selected portion will be repeated continually.
To return to normal playback, press A-B to select [Off].
DVD
MPEG4
Selecting a subtitle language
DVD
During playback, press SUBTITLE ( ) repeatedly to select a desired subtitle
Playing a DVD that has a menu
language.
Most DVD’s now have menus which load first before the film begins to play. You
can navigate these menus using vV b B or number button to highlight an
option. Press ENTER to select.
DVD
Watching from a different angle
If the angle indicator appears on the screen for a moment, you can select a
different camera angle by pressing ANGLE ( ) repeatedly.
Playing a DVD VR disc
This unit will play DVD-RW disc that are recorded using the Video Recording
(VR) format. When you insert a DVD-VR disc, the menu will appear on the
screen. Use vV to select a title then press PLAY ( N). To display DVD-VR
menu, press DVD MENU or TITLE.
DVD
MPEG4
CD-G
Hearing a different audio
During playback, press AUDIO ( ) repeatedly to switch between the available
audio languages, channels or encoding methods.
Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player
does not support these kinds of discs.
MPEG4
DVD
Slow down the playing speed
(Forward only)
While playback is paused, press SCAN (m or M) to slow down reverse or
forward playback. You can change the various playback speed by pressing
SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal
speed.
ALL
Skip to the next/previous chapter/track
Press SKIP (>) to move to the next chapter/track.
Press SKIP (.) to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the previous chapter/track.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 12
DVD
MPEG4
Watching a enlarged video image
Playing MPEG4 movie file
During playback or pause mode, press ZOOM repeatedly to select zoom mode.
You can move through the zoomed picture using vVb B buttons. Press
CLEAR to exit.
ON REMOTE
OPEN/CLOSE
1 Open the disc tray:
2 Insert a disc:
Z
-
DVD
Viewing the title menu
Press TITLE to display the disc's title menu, if available.
3 Close the disc tray:
4 Select a movie file from the menu:
5 Start playback:
Z
OPEN/CLOSE
DVD
Viewing the DVD menu
v V, DVD MENU
Press DVD MENU to display the disc menu, if available.
N
x
PLAY
STOP
6 To stop playback:
DVD
MPEG4
Marking a favorite scene
You can mark positions by pressing MARKER at the desired position up to
9 markers. Also you can recall or clear positions by pressing SEARCH.
Use b or B to select a desired marker on the [MARKER SEARCH] menu, then
press ENTER to recall it or CLEAR to clear it.
Playing MPEG4 movie files -
more you can do
DVD
MPEG4
Starting play from selected time
Changing the character set to display MPEG4 subtitle correctly
Searches for the starting point of entered time code. Press DISPLAY then
select clock icon. Enter a time then press ENTER. For example, to find a scene
at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If
you enter the wrong number, press CLEAR to enter again.
Press and hold SUBTITLE for 3 seconds during playback. The language code
will appear. Press b B to select another language code until the subtitle is
displayed properly and then press ENTER.
MPEG4 file requirement
DVD
ACD
Last Scene Memory
This unit does not support the DivX file.
This unit memorizes last scene from the last disc that is viewed. The last scene
remains in memory even if you remove the disc from the player or switch off the
unit. If you load a disc that has the scene memorized, the scene is automatical-
ly recalled.
MPEG4 file compatibility with this player is limited as follows:
•
•
•
•
Available resolution size: 720x576 (W x H) pixel
The file names of MPEG4 and subtitle are limited to 20 characters.
MPEG4 file extensions: “.avi”, “.mpg”, “.mpeg”
Playable MPEG4 subtitle: SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), SubViewer 2.0 (.sub/.txt),
TMPlayer (.txt), DVD Subtitle System (.txt),
Screen Saver
The screen saver appears when you leave the unit in Stop mode for about five
minutes. If the Screen Saver is displayed for five minutes, the unit automatically
turns itself off.
VobSub(*.sub)
Sub/idx, stream based format
•
•
•
Playable Audio format: “Dolby Digital”, “DTS”, “PCM”, “MP3”, “WMA”
Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48 kHz (WMA)
Bit rate: within 8 - 320 kbps (MP3), within 32 - 256 kbps (WMA),
less than 6Mbps (MPEG4 file)
Mixed disc or USB Flash Drive – MPEG4, MP3/WMA and JPEG
When playing a disc or USB Flash Drive contained with MPEG4, MP3/WMA
and JPEG files together, you can select which menu of files you would like to
play by pressing TITLE.
•
•
CD-R/RW, DVD R/RW Format: ISO 9660
Maximum Files/Disc: Less than 650 (total number of files and folders)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 13
Notes on MPEG4 format
MP3/WMA music file requirement
•
The “This file has the non-supported type on the player. Please move into
browser and select the other file.” will appear if this unit does not support the
MPEG4 file.
MP3/WMA compatibility with this unit is limited as follows:
•
•
•
•
•
File extensions: “.mp3”, “.wma”
Sampling frequency: within 8 - 48 kHz (MP3), within 22 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3), within 32 - 256kbps (WMA)
CD-R/RW, DVD R/RW Format: ISO 9660
•
•
If the video and audio structure of MPEG4 file is not interleaved, returns to
the menu screen.
If there is impossible code to express in the MPEG4 file name, it may be
displayed as “_” mark.
Maximum Files/Disc: Less than 650 (total number of files and folders)
Viewing photo files
Listening to Music Disc or files
ON REMOTE
ON REMOTE
1 Open the disc tray:
Z
-
OPEN/CLOSE
1 Open the disc tray:
2 Insert a disc:
Z
-
OPEN/CLOSE
2 Insert a disc:
3 Close the disc tray:
Z
OPEN/CLOSE
3 Close the disc tray:
4 Select music from the menu:
5 Start playback:
Z
OPEN/CLOSE
4 Select a photo file on the menu:
5 Display the selected file in full screen:
6 To return to the menu:
v V, DVD MENU
v V, DVD MENU
N PLAY
N PLAY
x
STOP
6 To stop playback:
x
STOP
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight ( ) icon then press ENTER to start slide show.
You can change slide show speed using b B when ( ) icon is highlighted.
Listening to Music Disc or files - more you
can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the order
of the music on the disc. To add music(s) on the program list, press
Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.
E
PROGRAM to enter the program edit mode ( mark appears on the menu).
Select desired music on the [List] then press ENTER to add the music to the
program list. Select music from the program list then press ENTER to start
programed playback. To clear music from the program list, select the music you
want to clear then press CLEAR in program edit mode. To clear all music from
the program list, select [Clear All] then press ENTER in program edit mode. The
program is cleared when the disc is removed or the unit is turned off.
Rotate a photo
Use vV to rotate the photo in full screen counterclockwise or clockwise while
viewing a photo in full screen.
Pause a slide show
Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue
the slide show.
Playing an CD-G disc
Once you insert an CD-G disc, a menu appears on the screen. Use vV to
select a track then press PLAY ( N). To display the CD-G menu during
playback, press STOP (x ) twice.
You can display the setup menu by pressing SETUP only when CD-G menu
appears on the TV screen.
Listening to music during slide show
You can listen to music during slide show, if the disc contains music and photo
files together. Use vV b B to highlight (
) icon then press ENTER to start
slide show.
Displaying file information (ID3 TAG)
While playing a MP3 file containing file information, you can display the
information by pressing DISPLAY repeatedly.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 14
Watching an enlarged photo image
While viewing a photo in full screen, press ZOOM repeatedly to select zoom
mode. You can move through the zoomed photo using vVb B buttons.
Press CLEAR to exit.
Photo file requirement
JPEG file compatibility with this unit is limited as follows:
•
•
•
•
File extensions: “.jpg”
Photo size: Less than 5MB recommended
CD-R/RW, DVD R/RW Format: ISO 9660
Maximum Files/Disc: Less than 650 (total number of files and folders)
Using a USB Flash Drive
You can play MP3/WMA/JPEG/MPEG4 in the USB Flash Drive with version
1.1.
ON REMOTE
1 Connect an USB Flash Drive to the USB
port on the unit:
-
2 Display the menu screen in stop mode:
3 Select a file:
O
RETURN
v V, DVD MENU
4 Play the file:
N
PLAY
5 Remove the USB Flash Drive:
-
Notes an USB Flash Drive
•
You can switch USB device and DISC mode by pressing RETURN (O) only
in stop mode.
•
•
•
Do not extract the USB device in operation
Aback up demands to prevent a data damage.
If you use a USB extension cable or USB HUB, the USB device might not be
recognized.
•
Music files (MP3/WMA), photo files (JPEG) and MPEG4 files can be played.
For details of operation on each file type, refer to relevant pages.
A device is not supported when the total number of files is more than 650.
The USB function of this unit does not support all kinds of USB devices.
Digital camera and mobile phone are not supported.
•
•
•
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 15
Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Code
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
9072
Language
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Code
7282
6783
6865
7876
6978
6979
6984
7079
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
Language
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Code
7265
7387
7273
7285
7383
7378
7365
7165
7384
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Code
7678
7684
7775
7771
7783
7776
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
Language
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Slovenian
Spanish
Sudanese
Swahili
Swedish
Tagalog
Code
8185
Language
Tajik
Tamil
Telugu
Thai
Tonga
Turkish
Turkmen
Twi
Code
8471
8465
8469
8472
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
8376
6983
8385
8387
8386
8476
Italian
Ukrainian
Urdu
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Bulgarian
Burmese
Byelorussian
Chinese
Latvian, Lettish
Area Codes
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Code
Area
Code
Area
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
Area
Code
Area
Code
LK
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
CR
HR
CZ
DK
EC
EG
SV
ET
FJ
Greenland
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Malaysia
GL
HK
HU
IN
ID
IL
MV
MX
MC
MN
MA
NP
NL
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
PY
PH
PL
PT
RO
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
IT
SA
SN
SG
SK
SI
ZA
KR
ES
Uganda
Ukraine
Brazil
JM
JP
KE
KW
LY
LU
MY
Cambodia
Canada
Chile
China
Colombia
Congo
NZ
NG
NO
OM
PK
PA
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
FI
FR
DE
GB
GR
Oman
Pakistan
Panama
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 16
Specifications
Troubleshooting
Cause
General
Symptom
Correction
No power.
The power cord is disconnected.
No disc is inserted.
Plug the power cord into the wall
outlet securely.
Power requirements
Power consumption
Dimensions (Approx.)
AC 120V~60Hz
9W
430 x 35 x 200 mm
(W x H x D) without foot
The power is on,
but the unit does
not work.
Insert a disc.
Net Weight (Approx.)
Operating temperature
Operating humidity
Laser
1.5 kg
5 °C to 35 °C
5 % to 90 %
Semiconductor laser
NTSC
No picture.
The TV is not set to receive the
signal from the unit.
Select the appropriate video input
mode on the TV.
Signal system
The video cable is not connected
securely.
Connect the video cable securely.
Outputs
Video Output
1.0 V (p-p), 75 Ω, sync negative,
RCA jack (L, R) x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative,
The equipment connected with
the audio cable is not set to
receive the signal from the unit.
Select the correct input mode of
the audio amplifier.
No sound.
Component Video Output
RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω,
RCA jack x 2
(Y) 1.0 V (p-p), 75 Ω,
The AUDIO options are set to the Set the AUDIO settings to the
wrong position.
correct position.
S-Video Output
sync negative, Mini DIN 4-pin x 1
(C) 0.3 V, 75 Ω
19 pin(HDMI standard, Type A)
2.0 Vrms (1 KHz, 0 dB), 600 Ω,
RCA jack (L, R) x 1
An unplayable disc is inserted.
Insert a playable disc. (Check the
disc type and regional code.)
The unit does not
start playback.
HDMI Video/Audio Output
Audio Output
The rating level is set.
Change the rating level.
Digital Output (Optical)
Digital Output (Coaxial)
3 V (p-p), Optical jack x 1
0.5 V (p-p), 75 Ω, RCA jack x 1
The remote control is not pointed
at the remote sensor on the unit.
Point the remote control at the
remote sensor of the unit.
The remote con-
trol does not work
properly.
Accessories
The remote control is too far from Operate the remote control closer
the unit. to the unit.
Video/Audio cable, Remote Control, Battery
Designs and specifications are subject to change without
prior notice.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DV392H-N.CUSALLK_0959_ENG 2/20/08 9:37 AM Page 17
LG Electronics, Inc. Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or workmanship, under normal use, during the war-
ranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only
to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
PARTS: One Year from the Date of Purchase.
Call 1-800-243-0000
replaced.
Please retain dated sales receipt and your box to return the unit to LG for repair
or replacement.
Shipping both ways will be paid by LG during the Warranty Period. After the
Warranty Period, you pay inbound shipping charges and LG pays return shipping
charges.
for instructions on getting the defective unit repaired or
*
Parts replaced are warranted for the remaining portion of the original warranty
period.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN
DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDI-
RECT, SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMI-
TATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED IN CON-
TRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied
warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights that may
vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration, maintenance or failure to maintain, or separate
system components; and
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside environmental specifications or contrary to the
requirements or precautions in the Operating Guide, accident, lightning strikes or other natural causes, unauthorized modification or alteration, incorrect elec-
trical current or voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer software, institutional or commercial
use, or other causes not arising out of defect in material or workmanship.
•
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy, Product Assistance, or
Customer Assistance
Call
(24 hours a day, 365 days per year) and select appropriate
1-800-243-0000
options from the menu.
Or visit our website at http://us.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|