OWNER’S MANUAL
LED TV*
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your TV
and retain it for future reference.
22LY340C
29LY340C
32LY340C
39LY340C
42LY340C
47LY340C
55LY340C
60LY340C
65LY340C
42LY540S
47LY540S
55LY540S
65LY540S
*MFL68080362*
P/NO : MFL68080362 (1405-REV02)
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
3
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• CAUTION concerning the Power Cord
(Can differ by country):
It is recommended that appliances be
placed upon a dedicated circuit; that is, a
single outlet circuit which powers only that
appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain. Do not
connect too many appliances to the same
AC power outlet as this could result in fire or
electric shock. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could
result in electric shock or fire. Periodically
examine the cord of your appliance, and
if its appearance indicates damage or
• Only use attachments/accessories specified
by the manufacturer.
• Use only with a cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
deterioration, unplug it, discontinue use of
the appliance, and have the cord replaced
with an exact replacement part by an
authorized service. Protect the power cord
from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a
door, or walked upon. Pay particular attention
to plugs, wall outlets, and the point where
the cord exits the appliance. Do not move
the TV with the power cord plugged in. Do
not use a damaged or loose power cord. Be
sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
• Unplug this apparatus during lightning storms
or when unused for long periods of time.
• Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
• Warning - To reduce the risk of fire or
electrical shock, do not expose this product
to rain, moisture or other liquids. Do not
touch the TV with wet hands. Do not install
this product near flammable objects such
as gasoline or candles, or expose the TV to
direct air conditioning.
• Do not stick metal objects or any other
conductive material into the power cord. Do
not touch the end of the power cord while it
is plugged in.
• Keep the packing anti-moisture material
or vinyl packing out of the reach of
children. Anti-moisture material is harmful
if swallowed. If swallowed by mistake,
induce vomiting and go to the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the reach of
children.
• Do not expose to dripping or splashing and
do not place objects filled with liquids, such
as vases, cups, etc. on or over the apparatus
(e.g. on shelves above the unit).
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
4
• Grounding
• Cleaning
(Except for devices which are not grounded.)
Ensure that you connect the earth ground
wire to prevent possible electric shock
(i.e. a TV with a three-prong grounded AC
plug must be connected to a three-prong
grounded AC outlet). If grounding methods
are not possible, have a qualified electrician
install a separate circuit breaker. Do not try to
ground the unit by connecting it to telephone
wires, lightening rods, or gas pipes.
When cleaning, unplug the power cord and
wipe gently with a soft cloth to prevent
scratching. Do not spray water or other
liquids directly on the TV as electric shock
may occur. Do not clean with chemicals such
as alcohol, thinners, or benzine.
• Moving
Make sure the product is turned off,
unplugged, and all cables have been
removed. It may take 2 or more people to
carry larger TVs. Do not press or put stress
on the front panel of the TV.
Power
Supply
• Ventilation
Short-circuit
Breaker
Install your TV where there is proper
ventilation. Do not install in a confined space
such as a bookcase. Do not cover the product
with cloth or other materials while plugged.
Do not install in excessively dusty places.
• If you smell smoke or other odors coming
from the TV, unplug the power cord and
contact an authorized service center.
• Keep the product away from direct sunlight.
• Never touch this apparatus or antenna during
a lightning storm.
• When mounting a TV on the wall, make sure
not to install the TV by hanging the power
and signal cables on the back of the TV.
• Do not allow an impact shock, any objects to
fall into the product, and do not drop anything
onto the screen.
• As long as this unit is connected to the AC
wall outlet, it is not disconnected from the AC
power source even if the unit is turned off.
• Do not attempt to modify this product in
any way without written authorization from
LG Electronics. Unauthorized modification
could void the user’s authority to operate this
product.
• Outdoor Antenna Grounding
(Can differ by country):
If an outdoor antenna is installed, follow
the precautions below. An outdoor antenna
system should not be located in the vicinity
of overhead power lines or other electric light
or power circuits, or where it can come in
contact with such power lines or circuits as
death or serious injury can occur. Be sure the
antenna system is grounded so as to provide
some protection against voltage surges
and built-up static charges. Section 810 of
the National Electrical Code (NEC) in the
U.S.A. provides information with respect to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding
conductors, location of antenna discharge
unit, connection to grounding electrodes and
requirements for the grounding electrode.
Antenna grounding according to the National
Electrical Code, ANSI/NFPA 70
• DISCONNECTING DEVICE FROM THE MAIN
POWER
Mains plug is the disconnecting device. The
plug must remain readily operable.
• Store the accessories (battery, etc.) in a safe
location out of the reach of children.
• This apparatus uses batteries. In your
community there might be regulations that
require you to dispose of these batteries
properly due to environmental considerations.
Please contact your local authorities for
disposal or recycling information.
• Do not dispose of batteries in a fire.
• Do not short circuit, disassemble, or allow
the batteries to overheat.
Antenna Lead in Wire
Antenna Discharge Unit
(NEC Section 810-20)
Ground Clamp
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21)
Ground Clamp
Power Service Grounding
Electrode System
(NEC Art 250, Part H)
NEC: National Electrical Code
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
5
• Dot Defect
Preventing image burn or burn-in on your
TV screen
The panel is a high technology product with
resolution of two million to six million pixels.
In a very few cases, you could see fine dots
on the screen while you’re viewing the TV.
Those dots are deactivated pixels and do not
affect the performance and reliability of the
TV.
• Generated Sound
• If a fixed image displays on the TV screen for
a long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
• If the aspect ratio of the TV is set to 4:3 for a
long period of time, image burn may occur on
the letterboxed area of the screen.
Cracking noise: A cracking noise that occurs
when watching or turning off the TV is
generated by plastic thermal contraction
due to temperature and humidity. This noise
is common for products where thermal
deformation is required. Electrical circuit
humming/panel buzzing: A low level noise
is generated from a high-speed switching
circuit, which supplies a large amount
of current to operate a product. It varies
depending upon the product. This generated
sound does not affect the performance and
reliability of the product.
• Avoid displaying a fixed image on the TV
screen for a long period of time to prevent
image burn.
• Do not install this product on a wall if it
could be exposed to oil or oil mist. This may
damage the product and cause it to fall.
• Take care not to touch the ventilation
openings. When watching the TV for a long
period, the ventilation openings may become
hot. This does not affect the performance of
the product or cause defects in the product.
• If the TV feels cold to the touch, there may
be a small flicker when it is turned on. This
is normal; there is nothing wrong with TV.
Some minute dot defects may be visible on
the screen, appearing as tiny red, green, or
blue spots. However, they have no adverse
effect on the TV’s performance. Avoid
touching the LCD screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary
distortion effects on the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
6
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by
the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the
building, as close to the point of the cable entry as practical.
LG RECYCLING POLICY
LG Electronics offers a customized e-waste take-back and recycling service that meets local
needs and requirements in the countries where e-waste regulations are in place, and also provides
product and packaging take-back and recycling service voluntarily in some countries. LG Electronics
evaluates products’ recyclability at the design step using LG’s recyclability evaluation tool, with the
goal of improving recyclability where practicable. Through these activities, LG seeks to contribute
to conserving natural resources and protecting the environment.
For more information about the LG Recycling Policy, please visit our global site at
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
7
LICENSES
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the
United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that has
passed rigorous testing to verify that it plays DivX video. Visit divx.com for more
information and software tools to convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
registered in order to play purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX VOD section in your device
setup menu. Go to vod.divx.com for more information on how to complete your
registration.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation
or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in
terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
[email protected]. This offer is valid for three (3) years from the date on which you purchased the
product.
NOTE
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
• The available menus and options may differ from the input source or product model that you are
using.
• New features may be added to this TV in the future.
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
8
TABLE OF CONTENTS
2
IMPORTANT SAFETY
INSTRUCTIONS
25
29
30
SPECIFICATIONS
IR CODES
7
7
LICENSES
EXTERNAL CONTROL DEVICE
SETUP
OPEN SOURCE SOFTWARE
NOTICE
30
30
RS-232C Setup
Type of Connector;
D-Sub 9-Pin Male
8
9
TABLE OF CONTENTS
31
RS-232C Configurations
Communication Parameters
Command Reference List
Transmission / Receiving Protocol
32
32
33
ASSEMBLING AND PREPARING
9
Unpacking
11
Parts and Buttons
12
14
14
14
16
17
- Using the Joystick Button
Lifting and Moving the TV
Setting up the TV
- Attaching the Stand
- Mounting on a Table
- Mounting on a Wall
19
MAKING CONNECTIONS
19
20
Connecting to an Antenna or Cable
Other Connections
22
REMOTE CONTROL
MAINTENANCE
23
23
23
23
Cleaning your TV
- Screen, Frame, Cabinet, and Stand
- Power Cord
24
TROUBLESHOOTING
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
9
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
(For
32/39/42/47/55/60LY340C,
42/47/55LY540S)
Remote Control,
Batteries (AAA)
Owner’s Manual
Stand Base
(For 65LY340C, 65LY540S)
(For 22LY340C)
(For 29LY340C)
Stand Base
Stand Base
Stand Base
(For
(For 42LY340C, 42LY540S)
32/39/42/47/55/60/65LY340C,
42/47/55/65LY540S)
Stand Holder
2 EA
Cable Holder
1 EA
Wall Mount Spacers
2 EA
(Depending upon model)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
10
(For 32LY340C)
(For
(For
39/42/47/55/60/65LY340C,
42/47/55/65LY540S)
32/39/42/47/55/60/65LY340C,
42/47/55/65LY540S)
Stand Screws
4 EA, M4 x L20
Stand Screws
4 EA, M4 x L14
Power Cord
(For 29LY340C)
(For 22LY340C)
Power Cord, AC/DC Adapter
AC/DC Adapter
(Depending upon model)
(Depending upon model)
CAUTION
• Do not use any unapproved items to ensure the safety and product’s lifespan.
• Any damages or injuries by using unapproved items are not covered by the warranty.
• Some models appear to have a thin film on the screen. It is actually part of the screen; do not
remove it.
NOTE
• The items supplied with your product may vary depending upon the
model.
B
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
• Use an extension cable that supports USB 2.0 if the USB cable or
USB memory stick does not fit into your TV’s USB port.
B
A
A
*A 10 mm (0.39 inches)
*B 18 mm (0.7 inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
11
Parts and Buttons
(For 22/32/39/42/47/55/60/65LY340C, 42/47/55/65LY540S)
Screen
Speakers
Joystick Button2
Remote Control Sensor
Intelligent Sensor1
(Depending upon model)
Power Indicator
1. Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2. Joystick Button is located below the screen of TV.
NOTE
• You can set the power indicator light to on or off by selecting OPTION in the main menus.
(Depending upon model)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
12
Using the Joystick Button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right
Basic functions
When the TV is turned off, place your finger on the joystick button and
press it once and release it.
Power On
When the TV is turned on, place your finger on the joystick button and
press it once for a few seconds and release it.
Power Off
(However, if the Menu button is on the screen, pressing and holding the
joystick button will let you exit the Menu.)
If you place your finger over the joystick button and move it left or right,
Volume Control
you can adjust the volume level you want.
If you place your finger over the joystick button and move it up or down,
Channels Control
you can scrolls through the saved channels you want.
NOTE
• With your finger over the joystick button, move it up, down, left or right, be careful not to press the
joystick button. If you press the joystick button first, you can not adjust the volume level and/or scroll
through saved channels.
Adjusting the menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items (
,
,
,
) moving the joystick button up, down, left or right.
TV Off
Turn the power off.
Settings
Accesses the main menu.
Input List
Close
Changes the input source.
Clears on-screen displays and returns to TV viewing.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
13
(For 29LY340C)
Screen
Speakers
OK
SETTINGS INPUT
Touch Buttons
Touch Button
Description
/
/
Scrolls through the saved channels.
Adjusts the volume level.
OK
Selects the highlighted menu option or confirms an input.
Accesses the main menus, or saves your input and exits the menus.
Changes the input source.
SETTINGS
INPUT
Turns the power on or off.
NOTE
• All of the buttons are touch sensitive and can be operated through simply touching with your finger.
• You can set the power indicator light to on or off by selecting OPTION in the main menus.
(Depending upon model)
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
14
Lifting and Moving the TV
CAUTION
• When handling the TV, be careful not to
damage the protruding joystick button.
(Depending upon model)
When moving or lifting the TV, read the
following to prevent the TV from being
scratched or damaged and for safe
transportation regardless of its type and size.
CAUTION
• Avoid touching or applying pressure to the
screen at all times, as this may result in
damage to the screen.
• Do not place the product on the floor with its
front facing down without padding. Failure to
do so may result in damage to the screen.
Setting up the TV
• It is recommended to move the TV in the
box or packing material that the TV originally
came in.
• Before moving or lifting the TV, disconnect
the power cord and all cables.
Attaching the Stand
CAUTION
• When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
• When holding the TV, the
screen should face away from
you to avoid damage.
(For 22LY340C)
• Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
1
• Use at least two people to
move a large TV.
• When transporting the TV by
hand, hold the TV as shown in
the following illustration.
Stand Base
2
• When transporting the TV, do not expose the
TV to jolts or excessive vibration.
• When transporting the TV, keep the TV
upright; never turn the TV on its side or tilt
towards the left or right.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
15
(For 29LY340C)
(For 32/39/42/47/55/60/65LY340C,
42/47/55/65LY540S)
A Stand Base
1
1
1
2
B Stand Base
2
(For 32LY340C)
4 EA
M4 x L20
Stand Base
(For 39/42/47/55/
60/65LY340C,
42/47/55/65LY540S)
2
4 EA
M4 x L14
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
16
Mounting on a Table
(For 22/29LY340C)
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
(For 32/39/42/47/55/60/65LY340C,
42/47/55/65LY540S)
1
Lift and tilt the TV into its upright position on
a table.
- Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
(
4 inche
s)
10 cm
10 cm
10 cm
10 cm
(
4 inche
s)
10 cm
10 cm
10 cm
2 Connect the AC/DC adapter and power cord
to a wall outlet.
2 Connect the power cord to a wall outlet.
3
1
CAUTION
DC-IN
(19V
)
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
2
or
2
DC-IN
(19V
)
1
CAUTION
• Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
17
Mounting on a Wall
Securing the TV to a wall (optional)
An optional wall mount can be used with your
LG Television. Consult with your local dealer for
a wall mount that supports the VESA standard
used by your TV model. Carefully attach the
wall mount bracket at the rear of the TV.
Install the wall mount bracket on a solid wall
perpendicular to the floor. If you are attaching
the TV to other building materials, please
contact qualified personnel to install the wall
mount. Detailed instructions will be included
with the wall mount. We recommend that you
use an LG brand wall mount. When you do not
use LG’s wall mount bracket, please use a wall
mount bracket where the device is adequately
secured to the wall with enough space to allow
connectivity to external devices.
(Depending upon model)
or
1
Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
10 cm
2 Mount the wall brackets with the bolts to
the wall.
(
4 inche
s)
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
10 cm
10 cm
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope or cable.
Make sure to keep the rope parallel to the
flat surface.
10 cm
CAUTION
• Make sure that children do not climb on or
hang on the TV.
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions
for the wall mount kits are described in the
following table.
NOTE
Model
22LY340C
29LY340C
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• Brackets, bolts, and ropes, are optional. You
can obtain additional accessories from your
local dealer.
VESA (A x B)
A
B
75 x 75
100 x 100
Standard screw
M4 x L10
4
M4 x L10
4
Number of screws
Wall mount bracket
(optional)
LSW140
LSW140
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
18
42/47/55LY340C
42/47/55LY540S
NOTE
Model
32/39LY340C
200 x 200
• Use the screws that are listed in the VESA
standard screw specifications.
VESA (A x B)
A
B
• The wall mount kit includes an installation
manual and necessary parts.
400 x 400
• The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
Standard screw
M6
4
M6
4
Number of screws
• The length of screws may differ depending
upon the wall mount. Make sure to use the
proper length.
• For more information, refer to the manual
supplied with the wall mount.
• When attaching a wall mounting bracket to
the TV, insert the wall mount inner spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
Wall mount bracket LSW240B
LSW440B
MSW240
(optional)
MSW240
60/65LY340C
65LY540S
Model
VESA (A x B)
A
B
400 x 400
Standard screw
M6
4
(For 42LY340C, 42LY540S)
Number of screws
Wall Mount
Spacers
Wall mount bracket
(optional)
LSW440B
CAUTION
• Disconnect the power before moving or
installing the TV. Otherwise electric shock
may occur.
• If you install the TV on a ceiling or slanted
wall, it may fall and result in severe
injury. Use an authorized LG wall mount
and contact the local dealer or qualified
personnel. When using a third-party wall
mount, it is not covered by the warranty.
• Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
• Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
• Screw length from outer surface of back
cover should be under 8 mm (0.3 inches).
(For 22/29LY340C)
Wall Mount Pad
Back Cover
Wall Mount Pad
Back Cover
Standard screw
: M4 x L10
Max. 8 mm
(0.3 inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
19
MAKING CONNECTIONS
• Image shown may differ from your TV.
You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.
For more information on external device’s connection, refer to the manual provided with each device.
NOTE
• If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the
manual provided with the connected device.
• The external device connections shown may differ slightly from illustrations in this manual.
• Connect external devices to the TV regardless about the order of the TV port.
• If you connect a gaming device to the TV, use the cable supplied with the gaming device.
• Refer to the external equipment’s manual for operating instructions.
• Using a DVI to HDMI cable may cause compatibility issues.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items
and an RF cable is optional.
VHF Antenna
UHF Antenna
Antenna
Coaxial (75Ω)
(*Not provided)
Terminal
CAUTION
• Make sure not to bend the copper wire of
the RF cable.
Copper wire
NOTE
• Use a signal splitter to use 2 TVs or more.
• DTV Audio Supported Codec: MPEG, Dolby
Digital
• Complete all connections between devices,
and then connect the power cord to the
power outlet to prevent damage to your TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
20
Other Connections
Connect your TV to external devices. For the best picture and audio quality, connect digital devices
using an HDMI cable. Any separate cable is not provided.
GND
L
Digital Audio System
Modem / Router
R
GND
OPTICAL AUDIO IN
ETHERNET
Speaker (8 Ω)
For
LY540S series
LAN
OPTICAL
DIGITAL
EXTERNAL
SPEAKER OUT
AUDIO OUT
For
22/29LY340C
RGB IN (PC)
RS-232C IN (CONTROL & SERVICE)
Y
VIDEO/
PB
PR
L/MONO AUDIO
R
COMPONENT IN / AV IN
Y
PB
PR
L
R
RGB OUT (PC) AUDIO OUT
VIDEO
AUDIO
VIDEO L/MONO AUDIO
R
Blu-Ray / HD Cable Box / DVD / VCR
PC
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS
21
Blu-Ray / HD Cable Box / HD STB / DVD / PC
HDMI
DVI OUT AUDIO OUT
For
LY540S series
For LY540S series
EXTERNAL
SPEAKER OUT
1
RGB IN (PC)
RS-232C IN (CONTROL & SERVICE)
USB
MHL Cable
Mobile
phone
Y
VIDEO/
PB
PR
L/MONO AUDIO
R
COMPONENT IN / AV IN
For 22/29LY340C
AUDIO OUT
HDMI
DVI OUT
Blu-Ray / HD Cable Box / HD STB / DVD
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
22
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To install batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to
the label inside the compartment, and close the battery cover. Failure to match the
correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries, perform the installation actions in reverse.
CAUTION
• Do not mix old and new batteries, as this may damage the remote control.
This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote
sensor.
(POWER) Turns the TV on or off.
TV Returns to the last TV channel.
CAPTION Activates or deactivates the subtitles.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as 2-1 and 2-2.
LIST Accesses the saved channel list.
FLASHBK Alternates between the two last channels selected.
VOL
Adjusts the volume level.
FLASHBK
FAV Accesses your favorite channel list.
AUDIO Digital signal: Changes the audio language. Analog signal: Changes the
MTS sound.
AUDIO
MUTE
CH
PAGE
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
PICTURE Changes the image mode.
INFO Shows information on the current program.
SOUND Changes the sound mode.
SETTINGS Accesses the main menu.
Q.MENU Accesses the quick menu.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous screen.
EXIT Clears all on-screen displays and returns to TV viewing.
Not functional
SLEEP Sets the length of time until the TV to turns off.
Control buttons (
,
,
,
,
) Controls the MY MEDIA menus and the
SIMPLINK compatible devices (USB, SIMPLINK).
These access special functions in some menus.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
23
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep it at peak performance and to extend the product’s lifespan.
CAUTION
• Before cleaning, turn the power off and disconnect the power cord and all other cables.
• When the TV is left unattended or unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, Frame, Cabinet, and Stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
• Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
• Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or
lubricants, as these may damage the screen’s finish and cause discoloration.
• Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power Cord
Remove the accumulated dust or dirt on the power cord regularly.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
24
TROUBLESHOOTING
The software may be updated for improvement in performance. The customer is responsible to ensure
the compatibility of their equipment with any LG Electronics software. If needed, please consult
with LG Electronics and update new software versions according to the guidance provided by LG
Electronics.
Problem
Solution
• Check if anything such as tape has been placed over the receiver.
Cannot control the TV with • Check if there is any obstacle between the product and the remote
the remote control.
control.
• Replace the batteries with new fresh ones.
• Check if the product is turned on.
No image display and no
sound is produced.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
• Check the power control settings. The power supply may be interrupted.
• Check if the auto off feature is activated in the Time settings.
The TV turns off suddenly.
When connecting to the
PC, ‘No signal’ or ‘Invalid
Format’ is displayed.
• Turn the TV off/on using the remote control.
• Reconnect the RGB/HDMI/DVI cable.
• Restart the PC with the TV on.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
25
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Television System
ATSC, NTSC-M, 64 & 256 QAM
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135, CADTV 1-135
75 Ω
Program Coverage
External Antenna Impedance
Operating Temperature
0 °C to 40 °C (32 °F to 104 °F)
Less than 80 %
Operating Humidity
Storage Temperature
Storage Humidity
Environment
condition
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
22LY340C
(22LY340C-UA)
29LY340C
(29LY340C-UA)
MODELS
507.6 x 355.9 x 135.8 (mm)
19.9 x 14.0 x 5.3 (inches)
507.6 x 315.7 x 53.1 (mm)
19.9 x 12.4 x 2.0 (inches)
3.1 kg (6.8 lbs)
668.6 x 457.0 x 182.1 (mm)
26.3 x 17.9 x 7.1 (inches)
668.6 x 410.5 x 81.9 (mm)
26.3 x 16.1 x 3.2 (inches)
5.6 kg (12.3 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
2.9 kg (6.3 lbs)
5.2 kg (11.4 lbs)
Power requirement
19 V
1.6 A
19 V
2.2 A
Manufacturer: Lien Chang
Model: LCAP16B-A
Manufacturer: Lien Chang
Model: LACP35
Manufacturer: LG Innotek
Model: PSAB-L205C
Manufacturer: APD
Model: DA-48F19
AC/DC Adapter
In: AC 100 - 240 V ~ 50/60 Hz
2.1 A Out: 19 V
Out: 19 V
2.53 A
32LY340C
(32LY340C-UA)
39LY340C
MODELS
(39LY340C-UA)
885 x 567 x 218 (mm)
34.8 x 22.3 x 8.5 (inches)
885 x 524 x 55.5 (mm)
34.8 x 20.6 x 2.1 (inches)
8.3 kg (18.2 lbs)
732 x 481 x 207 (mm)
28.8 x 18.9 x 8.1 (inches)
732 x 431 x 55.5 (mm)
28.8 x 16.9 x 2.1 (inches)
6.2 kg (13.6 lbs)
With stand
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
6.0 kg (13.2 lbs)
8 kg (17.6 lbs)
Current Value / Power Consumption
Power requirement
1.1 A / 65 W
0.9 A / 90 W
AC 100 - 240 V ~ 50 / 60 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
26
42LY340C
(42LY340C-UA)
42LY540S
(42LY540S-UA)
MODELS
961 x 612 x 218 (mm)
With stand
37.8 x 24.0 x 8.5 (inches)
961 x 567 x 55.5 (mm)
37.8 x 22.3 x 2.1 (inches)
9.5 kg (20.9 lbs)
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
9.2 kg (20.2 lbs)
Current Value / Power Consumption
Power requirement
1.0 A / 100 W
AC 100 - 240 V ~ 50 / 60 Hz
47LY340C
(47LY340C-UA)
47LY540S
(47LY540S-UA)
MODELS
1,073 x 676 x 247 (mm)
With stand
Dimensions
42.2 x 26.6 x 9.7 (inches)
1,073 x 629 x 55.8 (mm)
42.2 x 24.7 x 2.1 (inches)
12.7 kg (27.9 lbs)
(W x H x D)
Without stand
With stand
Weight
Without stand
12.3 kg (27.1 lbs)
Current Value / Power Consumption
Power requirement
1.1 A / 110 W
AC 100 - 240 V ~ 50 / 60 Hz
55LY340C
(55LY340C-UA)
55LY540S
(55LY540S-UA)
MODELS
1,243 x 772 x 247 (mm)
With stand
Dimensions
48.9 x 30.3 x 9.7 (inches)
1,243 x 725 x 56.8 (mm)
48.9 x 28.5 x 2.2 (inches)
17.7 kg (39.0 lbs)
(W x H x D)
Without stand
With stand
Weight
Without stand
17.3 kg (38.1 lbs)
Current Value / Power Consumption
Power requirement
1.3 A / 130 W
AC 100 - 240 V ~ 50 / 60 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
27
60LY340C
(60LY340C-UA)
MODELS
1,373 x 851 x 283 (mm)
With stand
54.0 x 33.5 x 11.1 (inches)
1,373 x 801 x 58.8 (mm)
54.0 x 31.5 x 2.3 (inches)
23.5 kg (51.8 lbs)
Dimensions
(W x H x D)
Without stand
With stand
Weight
Without stand
23.0 kg (50.7 lbs)
Current Value / Power Consumption
Power requirement
1.3 A / 130 W
AC 100 - 240 V ~ 50 / 60 Hz
65LY340C
(65LY340C-UA)
65LY540S
(65LY540S-UA)
MODELS
1,462 x 898 x 314 (mm)
With stand
Dimensions
57.5 x 35.3 x 12.3 (inches)
1,462 x 850 x 59.2 (mm)
57.5 x 33.4 x 2.3 (inches)
30.5 kg (67.2 lbs)
(W x H x D)
Without stand
With stand
Weight
Without stand
29.0 kg (63.9 lbs)
Current Value / Power Consumption
Power requirement
1.9 A / 190 W
AC 100 - 240 V ~ 50 / 60 Hz
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
28
RGB (PC), HDMI (PC) supported mode
Component port connecting information
(HDMI IN 2 does not support PC mode.)
Component ports on the TV
Y
PB
PR
Horizontal
Frequency (kHz) Frequency (Hz)
Vertical
Resolution
640 x 350
Y
Y
Y
Y
PB
PR
31.468
31.469
31.469
37.879
48.363
54.348
47.712
70.09
70.08
59.94
60.31
60.00
60.053
60.015
B-Y R-Y
Video output ports on DVD player
720 x 400
Cb
Pb
Cr
Pr
640 x 480
800 x 600
1024 x 768
1152 x 864
1360 x 768
1280 x 1024
(FHD only)
1920 x 1080
(FHD only)
Component supported mode
Horizontal
Resolution
Vertical
Frequency (kHz) Frequency (Hz)
63.981
67.50
60.02
60.00
15.73
15.73
31.47
31.50
44.96
45.00
33.72
33.75
26.97
27.00
33.71
33.75
67.432
67.50
59.94
60.00
59.94
60.00
59.94
60.00
59.94
60.00
23.976
24.00
29.97
30.00
59.94
60.00
720 x 480i
720 x 480p
1280 x 720p
1920 x 1080i
For 39/42/47/55/60/65LY340C,
42/47/55/65LY540S
HDMI (DTV) supported mode
Horizontal
Resolution
Vertical
Frequency (kHz) Frequency (Hz)
31.47
31.50
44.96
45.00
33.72
33.75
26.97
27.00
33.71
33.75
67.432
67.50
59.94
60.00
59.94
60.00
59.94
60.00
23.976
24.00
29.97
30.00
59.94
60.00
720 x 480p
1280 x 720p
1920 x 1080i
1920 x 1080p
1920 x 1080p
Download from Www.Somanuals.com. All Manuals Search And Download.
IR CODES
29
IR CODES
(Depending upon model)
Code
Code
(Hexa)
Function
(Hexa)
Note
Function
Note
◄◄
08
(POWER)
Remote control Button 8F
(Power On/Off)
Remote control Button
30
AV MODE
Remote control Button 79
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
RATIO
4D
52
0E
39
0A
0B
INPUT
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
PICTURE
SOUND
SLEEP
0F
TV
10-19
4C
Number Key 0-9
- (DASH) / LIST
FLASHBK
VOL
CAPTION
AUDIO
1A
02
03
VOL
Remote control Button
1E
09
00
01
43
45
28
AA
5B
44
40
41
07
06
72
71
63
61
B1
B0
BA
8E
FAV
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
Remote control Button
MUTE
CH, PAGE
CH, PAGE
SETTINGS
Q.MENU
INFO
ꕯ
EXIT
OK
^
v
<
>
ꕗ
►
ꕘ
►►
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
30
Type of Connector;
D-Sub 9-Pin Male
EXTERNAL CONTROL
DEVICE SETUP
1
5
RS-232C Setup
Connect the RS-232C (serial port) input jack to
an external control device (such as a computer
or an A/V control system) to control the
product’s functions externally.
6
9
RS-232C IN
(CONTROL & SERVICE)
Connect the serial port of the control device to
the RS-232C jack on the product back panel.
No.
1
Pin name
RS-232C IN (CONTROL
&
SERVICE)
No connection
2
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
3
4
5
6
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
7
NOTE
• RS-232C on this unit is intended to be used
with third party RS-232C control hardware
and software. The instructions below are
provided to help with programming software
or to test functionality using telenet
8
9
software. RS-232C connection cables are
not supplied with the product.
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
31
RS-232C Configurations
Set ID
Set ID number; “Real Data Mapping”
Press SETTINGS to access the main menus.
7-Wire Configuration
(Serial female-female NULL modem cable)
1
2 Press the Navigation buttons to scroll to
PC
TV
Option and press OK.
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
3
2
5
6
4
8
7
3 Press the Navigation buttons to scroll to Set
ID and press OK.
4 Scroll left or right to select a set ID number
and select CLOSE. The adjustment range is
1-99.
5 When you are finished, press EXIT.
*Real data mapping
0 : Step 0
A : Step 10 (SET ID 10)
D-Sub 9
D-Sub 9
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
3-Wire Configurations(Not standard)
PC TV
63 : Step 99 (SET ID 99)
64 : Step 100
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXD
RXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
32
Communication Parameters
• Baud rate: 9600 bps (UART)
• Data length: 8 bits
• Parity : None
• Stop bit: 1 bit
• Communication code: ASCII code
• Use a null modem cable.
Command Reference List
DATA
(Hexadecimal)
DATA
(Hexadecimal)
COMMAND1 COMMAND2
COMMAND1 COMMAND2
01. Power
k
x
a
00 - 01
14. Balance
k
x
t
t
00 - 64
02. Input
Select
15. 3D (For
3D TV)
b
(See p. 34)
(See p. 34)
(See p. 35)
03. Aspect
Ratio
16. Color
Temperature
k
k
k
c
d
e
x
x
u
v
00 - 64
17. Extended
3D (For 3D
TV)
04. Screen
Mute
00 - 01
00 - 01
(See p. 36)
05. Volume
Mute
18. Auto
Configuration
j
u
b
(See p. 36)
00 - 01
06. Volume
Control
20. Channel
Add/Del
k
k
k
f
00 - 64
00 - 64
00 - 64
m
07. Contrast
g
h
21. Key
m
m
c
(See p. 37)
00 - 64
08.
Brightness
22. Backlight
g
09. Color
10. Tint
k
k
i
j
00 - 64
00 - 64
23. Equalize
j
v
(See p. 37)
11.
k
k
k
l
00 - 32
00 - 01
Sharpness
12. OSD
Select
13. Remote
Control
Lock Mode
k
m
00 - 01
DATA00
DATA01
DATA02
DATA03
DATA04
DATA05
COMMAND1 COMMAND2
(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)
19.
Channel
Tuning
physical
program
high
major
program
low
m
a
major low minor high minor low attribute
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
33
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : First command to control the set.(j, k, m or x)
[Command 2] : Second command to control the set.
[Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment
range is 1~ 99. When selecting Set ID 0, every connected the set is controlled. Set ID is indicated as
decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol.
[DATA] : To transmit the command data.
Transmit the FF data to read status of command.
[Cr] : Carriage Return
ASCII code 0x0D
[ ] : ASCII code space (0x20)
* In this model, set will not send the status during the standby mode.
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[OK]: Use the large character.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data01: Illegal Code
Data02: Not supported function
Data03: Wait more time
* In this model, set will not send the status during the standby mode.
* Data Format
[Command 2] : Use as command.
[Set ID] : Use the small character, if set ID is 10, it will send the 0, a.
[DATA] : Use the small character, if data is 0 x ab, it will send the a, b.
[NG] : Use the large character
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
34
01. Power (Command: k a)
04. Screen Mute (Command: k d)
To select screen mute on/off.
To control Power On/Off of the set.
Transmission [k][a][ ][Set ID][ ][Data][Cr]
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00: Power Off
Data 01: Power On
Data 00: Screen mute off (Picture on), Video-
out Mute off
Acknowledgement [a][ ][Set ID][ ][OK/NG][Data]
[x]
Data 01: Screen mute on (Picture off)
Data 10: Video-out Mute on
* In a like manner, if other functions
transmit ‘FF’ data based on this format,
Acknowledgement data feedback presents
status about each function.
Acknowledgement [d][ ][Set ID][ ][OK/NG][Data]
[x]
*In case of Video-out Mute on only, TV will
display On Screen Display (OSD). But, in case
of screen mute on, TV will not display On
Screen Display (OSD).
* Note: In this model, set will send the
Acknowledge after power on processing
completion.
There might be a time delay between
command and acknowledge.
05. Volume Mute (Command: k e)
To control volume mute on/off.
02. Input Select (Command: x b)
To select input source for set.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data 00: DTV (Antenna)
You can also adjust mute using the MUTE
button on
remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
Data 00: Volume mute on (Volume off)
Data 01: Volume mute off (Volume on)
Data 01: DTV (Cable)
Data 10: Analog (Antenna)
Data 11: Analog (Cable)
Acknowledgement [e][ ][Set ID][ ][OK/NG][Data]
[x]
Data 20: AV or AV1
Data 21: AV2
Data 40: Component or Component1
Data 41: Component2
06. Volume Control (Command: k f)
Data 60: RGB-PC
Data 91: HDMI2
Data 90: HDMI1
Data 92: HDMI3
To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data]
[x]
Transmission [k][f][ ][Set ID][ ][Data][Cr]
* Use the feature depending upon your model.
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Acknowledgement [f][ ][Set ID][ ][OK/NG][Data]
[x]
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01: 4:3
Data: 09: Just scan
07. Contrast (Command: k g)
Data 02: 16:9
Data 04: Zoom
Data: 10: Cinema Zoom 1
To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Data 06: Set by program
Data 1F: Cinema Zoom16
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data]
[x]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data]
[x]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
35
08. Brightness (Command: k h)
12. OSD Select (Command: k l)
To adjust screen brightness.
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off Data 01: OSD on
You can also adjust brightness in the PICTURE
menu.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data]
[x]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
13. Remote Control Lock Mode (Command: k
m)
Acknowledgement [h][ ][Set ID][ ][OK/NG][Data]
[x]
To lock the remote control and the front panel
controls on the set.
09. Color (Command: k i)
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off Data 01: Lock on
To adjust screen color.
You can also adjust color in the PICTURE menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Acknowledgement [m][ ][Set ID][ ][OK/NG]
[Data][x]
If you’re not using the remote control and front
panel
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
controls on the Monitor set, use this mode.
When main power is on/off, remote control
lock is released.
*Refer to Real data mapping.
Acknowledgement [i][ ][Set ID][ ][OK/NG][Data]
[x]
If Key Lock is on in the standby mode, TV
will not turn on by POWER button of remote
control and on the TV.
10. Tint (Command: k j)
To adjust screen tint.
You can also adjust tint in the PICTURE menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
14. Balance (Command: k t)
To adjust balance.
Data Red: 00 ~ Green: 64 (*transmit by
Hexadecimal code)
You can also adjust balance in the AUDIO
menu.
*Refer to Real data mapping.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Acknowledgement [ j ][ ][Set ID][ ][OK/NG]
[Data][x]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
11. Sharpness (Command: k k)
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
To adjust screen sharpness.
You can also adjust sharpness in the PICTURE
menu.
15. 3D (Command: x t) (For 3D TV)
To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data01
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 32 (*transmit by
Hexadecimal code)
*Refer to Real data mapping.
00: 3D On
01: 3D Off
Acknowledgement [k][ ][Set ID][ ][OK/NG][Data]
[x]
02: 3D to 2D
03: 2D to 3D
Data02
00: Top and Bottom 01: Side by Side
02: Check Board 03: Frame Sequential
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
36
Data03
00: Right to Left
01: Left to Right
Data04
04: 3D Picture Balance
05: 3D Optimization
Data02: It has own range for each 3D option
determined by Data01.
3D Depth: Min : 00 ~ Max : 14
(*transmit by Hexadecimal code)
1) When Data01 is 00
00: Right to Left
01: Left to Right
2) When Data01 is 01, 02
*If data01 is 00(3D On), data04 has no
meaning.
Data Min: 00 ~ Max: 14 (*transmit by
Hexadecimal code)
*If data01 is 01(3D Off) or 02(3D to 2D),
data02, data03 and data04 have no meaning.
3) When Data01 is 03
00: Just Scan 01: 16:9
4) When Data01 is 04
*If data01 is 03(2D to 3D), data02 has no
meaning.
00: Off
01: On
Data 01
00
Data 02
Data 03
Data 04
5) When Data01 is 05
o
x
x
x
o
x
x
o
x
x
x
o
Data Min: 00 ~ Max: 02 (*transmit by
Hexadecimal code)
01
Acknowledgement [v][ ][OK][Data01][Data02][x]
[v][ ][NG][Data01][x]
02
03
* Use the feature depending upon your model.
x : Don’t care
18. Auto Configuration (Command: j u)
Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
To adjust picture position and minimize image
shaking automatically. Auto configuration only
works in RGB-PC mode.
16. Color Temperature (Command: x u)
Transmission [ j ][u][ ][Set ID][ ][Data][Cr]
Data 01: To set
To adjust color temperature.
You can also adjust color temperature in the
PICTURE menu.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data]
[x]
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by
Hexadecimal code)
19. Channel Tuning (Command: m a)
To tune channel to following physical/major/
minor number.
*Refer to Real data mapping.
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data]
[x]
Transmission [m][a][ ][Set ID][ ][Data00][ ]
[Data01]
[ ][Data02][ ][Data03][ ][Data04][ ][Data05][Cr]
17. Extended 3D (Command: x v) (For 3D TV)
Digital channels have a Physical, Major, and
Minor channel number. The Physical number is
the actual digital channel number, the Major is
the number that the channel should be mapped
to, and the Minor is the sub-channel. Since the
ATSC tuner automatically maps the channel to
the Major number, the Physical number is not
required when sending a command.
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ]
[Data02][Cr]
Data01: 3D option
00: 3D Picture Correction
01: 3D Depth (2D to 3D Only)
02: 3D Viewpoint
Data 00: Physical Channel Number
NTSC air: 02~45, NTSC cable: 01, 0E~7D
ATSC air: 01~45, ATSC cable: 01~87
03: 3D Picture Size
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
37
Data 01 & 02: Major Channel Number
Data 01: High byte Data 02: Low byte
21. Key (Command: m c)
To send IR remote key code.
Two bytes are available for the Major and
Minor, normally only the second byte is used.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key Code - See p. 29
Data 03 & 04: Minor Channel Number
Not needed for NTSC.
Acknowledgement [c][ ][Set ID][ ][OK/NG][Data]
[x]
The table above lists the binary code which
must be converted to Hexadecimal before
sending. For example:
When TV is in the standby mode, TV will turn
on by POWER button of remote control only.
The binary code to tune the sub source to
an NTSC cable channel is 1000 0001, which
translates to 81 in Hex.
22. Backlight (Command: m g)
To adjust screen backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data 05: Attribute
Data Min:00 ~ Max:64 (*transmit by
Hexadecimal code)
* 7th bit : For which source do you want to
change the channel.
*Refer to Real data mapping.
* 6th bit: Use a two part or one part channel.
Most cases just use 0 since it’s ignored when
using NTSC.
Acknowledgement [g][ ][Set ID][ ][OK/NG][Data]
[x]
* 5th bit: Use 0 with NTSC since it can only use
the physical channel number. Normally use 1
for ATSC since most times it doesn’t matter
what the physical number is.
23. Equalize (Command: j v)
To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
* 4th bit: Set to 0.
MSB
LSB
* 3-0 bits: Choose signal type.
0
0
0
0
0
0
0
0
* Tune Command Examples:
1. Tune to the analog (NTSC) cable channel 35.
Data 00 = Physical of 35 = 23
Frequency
Data
7
0
0
0
0
1
6
0
0
1
1
0
5
0
1
0
1
0
Frequency
1st Band
2nd Band
4
0
0
3
2
1
0
0
0
0
1
Step
Data 01 & 02 = No Major = 00 00
Data 03 & 04 = No Minor = 00 00
Data 05 = 0000 0001 in binary = 01
Total = ma 00 23 00 00 00 00 01
0
0
0
0
0(decimal)
1(decimal)
...
3rd Band ... ... ... ... ...
4th Band
5th Band
1
1
0
0
0
1
1
0
1
0
19(decimal)
20(decimal)
2. Tune to the digital (ATSC) local channel 30-3.
Data 00 = Don’t know Physical = 00
Data 01 & 02 = Major is 30 = 00 1E
Data 03 & 04 = Minor is 3 = 00 03
Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x]
Example) To specify the value of the 5th band
(10 kHz) as +5:
Data 05 = 0010 0010 in binary = 22
Total = ma 00 00 00 1E 00 03 22
To specify the value of the 5th band as +5,
100 in binary, which falls in 7th, 6th and
5th bit, is necessary. To calculate the value,
take 0, with the minimum value of -10, as a
base. Then the value for +5 is 15 that equals
01111 in binary. To consolidate these values
and send it as a command, first, put the two
binary digits together: 10001111. This equals
8F in hexadecimal. Enter jv 00 8F to use as a
command.
* Use the feature depending upon your model.
20. Channel Add/Del (Command: m b)
To add and delete the channels.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00: Channel Delete Data 01: Channel Add
Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONTROL DEVICE SETUP
38
* Table List (Channel Tuning)
Two/One
Part
Channel
Using
Physical
Channel
Main/Sub
Picture
4
7
6
5
3
2
1
0
Step
Reserved
0
1
Main
Sub
0
1
Two
One
0
1
Use
No Use
x
0
0
0
0
0
0
0
0
x
0
0
0
0
1
1
1
1
x
0
0
1
1
0
0
1
1
x
0
1
0
1
0
1
0
1
x
NTSC Air
x
x
x
x
x
x
x
x
x
NTSC Cable
ATSC Air
ATSC Cable_std
ATSC Cable_hrc
ATSC Cable_irc
ATSC cable_auto
Reserved
...
1
1
1
1
Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILD SAFETY:
PROPER TELEVISION PLACEMENT MATTERS
THE CONSUMER ELECTRONICS INDUSTRY CARES
• Manufacturers, retailers and the rest of the consumer electronics industry are committed to
making home entertainment safe and enjoyable.
• As you enjoy your television, please note that all televisions – new and old- must be supported on
proper stands or installed according to the manufacturer’s recommendations. Televisions that
are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc.,
may fall over, resulting in injury.
TUNE IN TO SAFETY
• ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.
• ALWAYS read and follow all instructions for proper use of your television.
• NEVER allow children to climb on or play on the television or the furniture on which the television
is placed.
• NEVER place the television on furniture that can easily be used as steps, such as a chest of
drawers.
• ALWAYS install the television where it cannot be pushed, pulled over or knocked down.
• ALWAYS route cords and cables connected to the television so that they cannot be tripped
over, pulled or grabbed.
WALL OR CEILING MOUNT YOUR TELEVISION
• ALWAYS contact your retailer about professional installation if you have any doubts about your
ability to safely mount your television.
• ALWAYS use a mount that has been recommended by the television manufacturer and has a
safety certification by an independent laboratory (such as UL, CSA, ETL).
• ALWAYS follow all instructions supplied by the television and mount manufacturers.
• ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate.
Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder
block construction. If you are unsure, contact a professional installer.
• Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount
installation.
MOVING AN OLDER TELEVISION TO A NEW PLACE IN
YOUR HOME
• Many new television buyers move their older CRT televisions into a secondary room after the
purchase of a flat-panel television. Special care should be made in the placement of older CRT
televisions.
• ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size
and weight.
• NEVER place your older CRT television on a dresser where children may be tempted to use the
drawers to climb.
• ALWAYS make sure your older CRT television does not hang over the edge of your furniture.
CE.org/safety
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Customer Information Center
Declaration of Conformity
Trade Name: LG
Model:
22/29/32/39/42/47/55/60/65LY340C-UA
42/47/55/65LY540S-UA
Responsible Party: LG Electronics Inc.
Address: 1000 Sylvan Ave.
Englewood Cliffs NJ 07632
U.S.A
1-888-865-3026
1-888-542-2623
USA, Commercial User
CANADA
TEL: 201-266-2534
This product qualifies for ENERGY
STAR in the factory default (Home
Use) setting. Changing the factory
default settings or enabling other
The model and serial number of the TV are
located on the back and on one side of the
TV. Record them below should you ever need
service.
features may increase power consumption that
could exceed the limits necessary to quality for
ENERGY STAR.
Refer to ENERGYSTAR.gov for more information
on the ENERGY STAR program.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|