fax oPeratioN guide
fs-C2126MfP
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Conventions in This Guide
Please read the Operation Guide before using the facsimile.
The sections of this handbook and parts of the facsimile marked with symbols are safety warnings meant to
protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the facsimile.
The symbols and their meanings are indicated below.
WARNING: Indicates that serious injury or even death may result from insufficient attention to or
incorrect compliance with the related points.
CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention
to or incorrect compliance with the related points.
Symbols
The
symbol indicates that the related section includes safety warnings. Specific points of attention are
indicated inside the symbol.
.... [General warning]
.... [Warning of danger of electrical shock]
.... [Warning of high temperature]
The
symbol indicates that the related section includes information on prohibited actions. Specifics of the
prohibited action are indicated inside the symbol.
.... [Warning of prohibited action]
.... [Disassembly prohibited]
The z symbol indicates that the related section includes information on actions which must be performed.
Specifics of the required action are indicated inside the symbol.
.... [Alert of required action]
.... [Remove the power plug from the outlet]
[Always connect the machine to an outlet with a ground
connection]
....
Please contact your service representative to order a replacement if the safety warnings in this Operation Guide
are illegible or if the guide itself is missing. (fee required)
i
Download from Www.Somanuals.com. All Manuals Search And Download.
<Note>
Due to performance updating, information in this Operation Guide is subject to change without notice.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Selection of Telephone Line (Inch version only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Selection of Transmit Terminal Identification (TTI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Setting the TTI information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Date and Time Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6
Automatic Send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
FAX Automatic Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9
Cancelling Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Using the Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Dialing the Same Receiving System (Redial) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Delayed Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Broadcast Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
Standby Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Interrupt Send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Chain Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Manual Send . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10
Manual Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Remote Switch Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-14
Sub Address Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-32
Sub Address Box Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-35
Program Dial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-41
Polling Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-43
Account Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
Other Convenient Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55
Various Tools for Checking Transmission Results and Registration Status . . . . . . . . . . . . . . . . 5-2
Printing Administrative Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Reporting FAX Receipt Result by E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11
FAX/Answering Machine Auto Switch Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Basic Operation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
DRD Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Retry Times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-13
Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-16
Print all at once [Batch Print] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-20
Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-21
Duplex Print Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-27
Transmission Restriction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-28
Connection to PBX (Private Branch Exchange) (Europe only) . . . . . . . . . . . . . . . . . . . . . . . . 6-39
Remote Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-40
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Indicators During Sending/Receiving Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2
Error Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4
Character Entry Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-2
Specifications (Fax function) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-6
Menu List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-7
Received FAX Sizes and Paper Priority (Inch Model) . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-10
Received FAX Sizes and Paper Priority (Metric Model) . . . . . . . . . . . . . . . . . . . . . . . Appendix-11
Error Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Appendix-12
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Information
About this Operation Guide
This Operation Guide contains information on using the facsimile functions of this machine. Please read the
Operation Guide before you start using the machine.
During use, refer to the Operation Guide for your machine for information regarding the sections listed below.
•
•
•
•
Caution Labels
•
Toner Container and Waste Toner
Box Replacement
Installation Precautions
Precautions for Use
Loading Paper
•
•
•
Clearing Paper Jams
Solving Malfunctions
Cleaning
v
Download from Www.Somanuals.com. All Manuals Search And Download.
General Notice
Legal Notice
WE SHALL HAVE NO LIABILITY FOR LOSS, WHETHER OR PARTIAL, OF RECEIVED DOCUMENTS WHEN
SUCH LOSS IS CAUSED BY DAMAGES TO THE FAX SYSTEM, MALFUNCTIONS, MISUSE, OR EXTERNAL
FACTORS SUCH AS POWER OUTAGES; OR FOR PURELY ECONOMIC LOSSES OR LOST PROFITS
RESULTING FROM MISSED OPPORTUNITIES ATTRIBUTABLE TO MISSED CALLS OR RECORDED
MESSAGES RESULTING THEREFROM.
Trademark Information
•
Microsoft, MS-DOS and Windowsare registered trademarks of Microsoft Corporation in the U.S. and
other countries.
•
•
•
Ethernet is a registered trademark of Xerox Corporation.
IBM and IBM PC-AT are trademarks of International Business Machines Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
All other company and product names in this Operation Guide are trademarks or registered trademarks of their
respective companies. The designations™ and ® are omitted in this guide.
FCC PART 68 REQUIREMENTS
1
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On
the right side of the equipment to install Assembly Board is a label that contains, among other information,
a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the
telephone company.
2
3
This equipment connects to the network via USOC RJ11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product. It is designed to be connected to a
compatible modular jack that is also compliant. See installation instructions for details.
4
5
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call.
In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of
devices that may be connected to a line, as determined by the total RENs, contact the local telephone
company. For products approved after July 23, 2001, the REN for this product is part of the product
identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a
decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this equipment causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. But if advance notice isn't practical,
the telephone company will notify the customer as soon as possible. Also, you will be advised of your
right to file a complaint with the FCC if you believe it is necessary.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
The telephone company may make changes in its facilities, equipment, operations or procedures that
could affect the operation of the equipment. If this happens the telephone company will provide advance
notice in order for you to make necessary modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, please contact the following company for repair and (or)
warranty information:
If the equipment is causing harm to the telephone network, the telephone company may request that you
disconnect the equipment until the problem is resolved.
8
9
This equipment cannot be used on public coin service provided by the telephone company. Connection to
Party line service is subject to state tariffs. Contact the state public utility commission, public service
commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation
of this equipment does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
10 The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or
other electronic device, including FAX machines, to send any message unless such message clearly
contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission,
the date and time it is sent and an identification of the business or other entity, or other individual sending
the message and the telephone number of the sending machine or such business, other entity, or
individual. (The telephone number provided may not be a 900 number or any other number for which
charges exceed local or long-distance transmission charges.)
In order to program this information into your FAX machine, you should complete the following steps:
(Insure that it will be transmitted, see Local FAX Name Registration on page 2-4, Local FAX Information
Entry on page 2-5, Date and Time Entry on page 2-6, and Selection of Transmit Terminal Identification
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk
of fire, electric shock and injury to persons, including the following:
CAUTION: To reduce the risk of fire, use only No.26 AWG or larger UL listed or CSA certified
telecommunication line cord.
1
2
Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub,
in a wet basement or near a swimming pool.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote
risk of electric shock from lightning.
3
4
Do not use the telephone to report a gas leak in the vicinity of the leak.
Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They
may explode. Check with local codes for possible special disposal instructions.
SAVE THESE INSTRUCTIONS
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANTES MESURES DE SECURITE
Certaines mesures de sécurité doivent être prises pendant l'utilisation de matériel téléphonique afin de réduire
les risques d'incendie, de choc électrique et de blessures. En voici quelques unes:
1
2
Ne pas utiliser l'appareil près de l'eau, p. ex., près d'une baignoire, d'un lavabo, d'un évier de cuisine, d'un
bac à laver, dans un sous-sol humide ou près d'une piscine.
Eviter d'utiliser le téléphone (sauf s'il s'agit d'un appareil sans fil) pendant un orage électrique. Ceci peut
présenter un risque de choc électrique causé par la foudre.
3
4
Ne pas utiliser l'appareil téléphonique pour signaler une fuite de gaz s'il est situé près de la fuite.
Utiliser seulement le cordon d'alimentation et le type de piles indiqués dans ce manuel. Ne pas jeter les
piles dans le feu: elles peuvent exploser. Se conformer aux règlements pertinents quant à l'élimination
des piles.
CONSERVER CES INSTRUCTIONS
CANADIAN IC REQUIREMENTS
"This product meets the applicable Industry Canada technical specifications"
"The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be connected
to a telephone interface. The termination on an interface may consist of any combination of devices subject only
to the requirement that the sum of the RENs of all the devices does not exceed five."
The REN (CANADA) of this product is 0.4.
CONDITIONS DE L'IC CANADIENNE
"Le présent matériel est conforme aux spécifications techniques applicables d’Industrie Canada."
"L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être
raccordés à une interface téléphonique. La terminaison d'une interface peut consister en une combinaison
quelconque de dispositifs, à la seule condition que la somme d'indices d'équivalence de la sonnerie de tous les
dispositifs n'excède pas 5."
Le IES (CANADA) pour ce produit est 0.4.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Declarations to European Directives
DECLARATION OF CONFORMITY TO 2004/108/EC, 2006/95/EEC, 93/68/EEC, 1999/5/EC and 2009/125/EC
We declare under our sole responsibility that the product to which this declaration relates is in conformity with
the following specifications.
Limits and methods of measurement for immunity
characteristics of information technology
equipment
EN55024
Limits and methods of measurement for radio
interference characteristics of information
technology equipment
EN55022 Class B
Limits for harmonic currents emissions for
equipment input current 16A per phase
EN61000-3-2
EN61000-3-3
Limitation of voltage fluctuations and flicker in low-
voltage supply systems for equipment with rated
current 16A
Safety of information technology equipment,
including electrical business equipment
EN60950-1
TBR 21
Terminal Equipment (TE);
Attachment requirements for pan-European
approval for connection to the analogue Public
Switched Telephone Networks (PSTNs) of TE
(excluding TE supporting the voice telephony
service) in which network addressing, if provided,
is by means of Dual Tone Multi Frequency (DTMF)
signalling
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical regulations for terminal equipment
This terminal equipment complies with:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
TBR21
•
•
•
•
•
•
•
•
•
•
•
•
•
DE 08R00 National AN for D
DE 09R00 National AN for D
DE 12R00 National AN for D
DE 14R00 National AN for D
ES 01R01 National AN for E
GR 01R00 National AN for GR
GR 03R00 National AN for GR
GR 04R00 National AN for GR
NO 01R00 National AN for N
NO 02R00 National AN for N
AN 01R00 AN for P
AN 02R01 AN for CH and N
AN 05R01 AN for D, E, GR, P and N
AN 06R00 AN for D, GR and P
AN 07R01 AN for D, E, P and N
AN 09R00 AN for D
AN 10R00 AN for D
AN 11R00 AN for P
AN 12R00 AN for E
AN 16R00 General Advisory Note
DE 03R00 National AN for D
DE 04R00 National AN for D
DE 05R00 National AN for D
P 03R00
P 04R00
P 08R00
National AN for P
National AN for P
National AN for P
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Compatibility Declaration
The manufacturer declares that the equipment has been designed to operate in the public switched telephone
networks (PSTN) in the following countries:
„Austria
„Belgium
„Bulgaria
„Cyprus
„Czech
„France
„Germany
„Greece
„Hungary
„Iceland
„Ireland
„Italy
„Liechtenstein „Slovakia
„Lithuania
„Luxembourg
„Malta
„Slovenia
„Spain
„Sweden
„Norway
„Poland
„Switzerland
„The Netherlands
„United Kingdom
„Denmark
„Estonia
„Finland
„Portugal
„Romania
„Latvia
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About This Guide
This guide consists of the following chapters.
Explains the parts of the machine and keys on the operation panel.
Explains the settings required before using fax.
Explains general usage of the fax function such as sending originals and receiving originals.
Explains convenient fax functions such as setting the transmission time, continuous sending of the same
originals to multiple recipients and scheduling the next transmission. Also explains advanced fax
communication such as limiting the destinations and systems from which you receive originals, as well as
forwarding, saving, and printing the received originals for each requirement. Furthermore, explains sub address
communication functions of the machine that are compatible with other makers’ systems and job accounting
functions convenient for checking the communication status of fax.
Explains how to check the status of recent transmissions on the message display. Also, explains how to print
administrative reports to check communication results and settings and registration status of the machine.
Explains various settings and registration pertaining to functions, such as adjusting the volume of the alarm
sound.
Explains how to use Network FAX functions. Read the Network FAX Driver Operation Guide in the included CD-
ROM (online manual) as well.
Explains how to respond to error indications and trouble.
Explains character entry and the specifications of the machine.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Conventions in This Guide
The following conventions are used depending on the nature of the description.
Convention
Bold
Description
Example
Press the Start key.
Indicates the operation panel
keys or a computer screen.
[Regular]
Indicates a selection item on the Select [System].
Message Display.
Italic
Indicates a message displayed
on the Message Display.
Ready to copy is displayed.
Used to emphasize a key word,
phrase or references to
additional information.
For details, refer to the machine’s
Operation Guide.
Note
Indicates supplemental
information or operations for
reference.
NOTE:
Important
Caution
Indicates items that are required
or prohibited so as to avoid
problems.
IMPORTANT:
Indicates what must be
observed to prevent injury or
machine breakdown and how to
deal with it.
CAUTION:
Underline
A link function allows you to
jump to a related page. Position
the pointer over the underlined
text until the pointer changes to
a hand with appointing finger
(
). Then click the text. (In the
Contents, Index and Menu List,
the linked areas are not
underlined.)
Description of Operation Procedure
In this Operation Guide, the continuous operation of the keys on the message display is as follows:
Description in this
Actual procedure
Operation Guide
Press [FAX].
Press [FAX], [Next] of
Transmission, [Next] of Basic, and
then [Change] of TTI.
T
Press [Next] of Transmission.
T
Press [Next] of Basic.
T
Press [Change] of TTI.
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Part Names and Functions
This chapter explains the names of parts of the fax device.
For other parts, refer to the machine’s Operation Guide.
• Operation Panel........................................................................................................... 1-2
• Machine....................................................................................................................... 1-4
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Operation Panel
For the names of keys and indicators required when functions other than FAX are used, refer to the machine’s
Operation Guide.
Displays the Address Book screen, where you can add destinations.
Calls the previous destination. Also used to enter a
Displays the System Menu/Counter
pause when entering a FAX number.
menu screen.
Destinations can be checked and added.
Displays the Document Box screen.
Displays the Status/Job Cancel
screen.
Switches between on-hook and off-hook when
manually sending a FAX.
Displays the
Copy screen.
Message Display. Check what is shown
here while operating the machine.
Selects the menu displayed
at the lower right in the
Message Display.
Blinks while the
machine is
Displays the FAX screen.
Used to call destinations
registered to the one-touch key
numbers (1 to 22).
Not used in fax mode.
accessing the
memory.
Also used to register and
delete call destinations.
Blinks during printing and
transmission/reception.
Displays the Send screen.
Selects the menu displayed
at the lower left in the
Message Display.
Shifts to switch the one-touch key numbers
(1 to 11 and 12 to 22).
Lamp is lit while shifted (12 to 22).
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
1
Clears entered numbers and characters.
Used to select a menu item, move the cursor when
entering characters, change a value, etc.
Resets settings and displays the
basic screen.
Selects the chosen item or finalizes the
entered value.
Puts the machine to sleep or wakes it up.
Displays the function menu for FAX.
Lit when the machine's
main power is on.
Numeric keys.
Enter numbers and symbols.
Ends operation (logs out)
on the Administration
screen.
Returns the Message Display to the
previous screen.
Used to register or recall
programs.
Lights or blinks when an error occurs.
Cancels the printing job in progress.
Starts sending operations and processing for setting operations.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Machine
This chapter explains the names of parts of the fax device.
For the parts required when functions other than FAX are used, refer to the machine’s Operation Guide.
1
4
5
2
3
1
2
Operation panel Perform the fax operation with this panel.
Main power
switch
Set this switch to ON when performing the fax
or copier operation. The message display
lights to enable operation.
3
MP (Multi
Purpose) tray
Set the paper in this tray when using a type of
paper other than the cassette (e.g., when
using special paper).
4
5
LINE connector
TEL connector
Connect the modular cord for the telephone
line to this connector.
When using a commercially available
telephone set, connect the modular cord to
this connector.
IMPORTANT: You cannot automatically receive a fax when the main power switch is turned off. To put the
machine to sleep, press the Power key on the operation panel.
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Document Processor
7
1
6
8
9
10
6
7
Document
Processor
Cover
Open this cover when the original jammed in
the Document Processor.
Original width
guides
Adjust these guides according to the original
width.
8
9
Original table
Stack the sheet originals on this table.
Read originals are ejected onto this table.
Original eject
table
10 Opening handle Hold this handle when opening or closing the
Document Processor.
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Preparation Before Use
This chapter explains the preparation necessary before the machine is used.
There is no need for the customer to undertake this preparation if it has already been carried
out by a service representative.
• Selection of Telephone Line (Inch version only)......................................................2-2
• Selection of Transmit Terminal Identification (TTI) ..................................................2-3
• Setting the TTI information......................................................................................2-4
• Date and Time Entry ...............................................................................................2-6
• Connection to PBX (Europe only) ...........................................................................2-8
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Selection of Telephone Line (Inch version only)
Select the telephone line according to the type you are contracted with. Please note that selecting a wrong
telephone line will prevent you from sending fax.
Part that is operated
1
2
3
4
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Transmission].
FAX:
TX/RX Common
** *******
Reception
[ Exit ]
a b
1
*
Transmission
***********
3
5
6
Press the OK key.
Press the U or V key to select [FAX Dialing
Mode].
Transmission:
a b
3
4
Local FAX ID
Local FAX Number
5
*********************
FAX Dialing Mode
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Tone(DTMF)] ,
[Pulse(10pps)] or [Pulse(20pps)] according to the
type of telephone line you are contracted with.
FAX Dialing Mode: a b
1 *Tone(DTMF)
*********************
2
3
Pulse(10pps)
Pulse(20pps)
9
Press the OK key.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Selection of Transmit Terminal Identification (TTI)
The transmit terminal identification (TTI) is the information about the machine (transmit terminal) to be printed
out on the fax on the receiving system. The information includes transmission date and time, the number of
transmission pages, the Local FAX Name, and the Local FAX number/ID. This machine enables the user to
select if the TTI is printed out on the fax on the receiving system. Regarding the location of the information to
be printed, you can select inside or outside of the page image being sent.
2
NOTE: Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when
job accounting has been enabled, and you send originals after entering an Account ID, the Account Name is
printed.
1
2
3
4
5
6
7
8
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Transmission].
Press the OK key.
Press the U or V key to select [TTI].
Press the OK key.
Press the U or V key to select the desired location
for printing the information or [Off] if you don't want
to print it.
TTI:
a b
*********************
1
*Off
2
3
Outside
Inside
9
Press the OK key.
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Setting the TTI information
Register the name (local FAX name), fax number, and local FAX ID printed in the transmit terminal identification
(TTI) area.
By registering the TTI data, the receiver can easily find out where the FAX came from.
Part that is operated
Local FAX Name Registration
Register the local FAX name printed on in the transmit terminal identification.
NOTE: To change the entry, follow the same operation.
1
2
3
4
5
6
7
8
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Transmission].
Press the OK key.
Press the U or V key to select [Local FAX Name].
Press the OK key.
Enter the Local FAX Name to be registered. Up to
32 characters can be entered.
Local FAX Name:
B b
*
S
NOTE: For details on character entry, refer to
ABC
[ Text ]
9
Press the OK key.
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Local FAX Information Entry
Register the local FAX information (local FAX number/ID) printed on in the transmit terminal identification (TTI)
area. The Local FAX ID is used for transmission limit purposes. (Refer to Transmission Restriction on page 6-
28.)
2
1
2
3
4
5
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Transmission].
Press the OK key.
When you register the Local FAX Number, go to
next step. When you register the Local FAX ID, go
to step 10.
Local FAX Number Entry
6
Press the U or V key to select [Local FAX
Number].
7
8
Press the OK key.
Use the numeric keys to enter the local FAX
number to be registered. Up to 20 digits can be
entered.
Local FAX Number: T b
*
S
NOTE: Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete all entered digits and return to the default screen,
press the Reset key.
9
Press the OK key.
Local FAX ID Entry
10 Press the U or V key to select [Local FAX ID].
11 Press the OK key.
12 Use the numeric keys to enter the local FAX ID
Local Fax ID:
D b
number in 4 digits.
(0000 - 9999)
****1409*
13 Press the OK key.
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Date and Time Entry
Register the date and time of the machine’s built-in clock. Because the FAX delayed transmission is conducted
based on the time registered here, be sure to register the correct date and time.
IMPORTANT: Correct the time displayed on the operation panel regularly. The time displayed may deviate from
the current time due to errors.
1
2
Press the System Menu/Counter key.
Press the U or V key to select [Common
Settings].
3
4
5
6
Press the OK key.
Press the U or V key to select [Date Setting].
Press the OK key.
A login screen will appear. Then, enter the Login
User Name and Login Password to log in.
Login User Name: L b
********************
Login Password:
[ Login ]
7
Press [Login] (the Right Select key). The Date
Setting menu appears.
Date Setting:
a b
*********************
1
Date/Time
2
3
Date Format
Time Zone
[ Exit ]
8
9
Press the U or V key to select [Time Zone].
Press the OK key.
10 Press the U or V key to select your region.
Time Zone:
a b
1
*********************
*-12:00 Internati
2
3
-11:00 Midway
-10:00 Hawaii
11 Press the OK key.
12 Press the U or V key to select [Summer Time].
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
NOTE: If you select a region that does not utilize
summer time, the summer time setting screen will not
appear.
2
13 Press the OK key.
14 Press the U or V key to select [On] or [Off].
Summer Time:
*Off
a b
*********************
1
2
On
15 Press the OK key.
16 Press the U or V key to select [Date/Time].
17 Press the OK key.
18 Press the Y or Z key to move the cursor position,
Date/Time:
a b
enter year, month and day.
Year Month Day
*2010*
01
01
(Time Zone:Tokyo )
19 Press the OK key.
20 Press the Y or Z key to move the cursor position,
Date/Time:
a b
enter hours, minutes and seconds.
Hour Min. Second
****11: 45: 50
(Time Zone:Tokyo )
21 Press the OK key.
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation Before Use
Connection to PBX (Private Branch Exchange) (Europe only)
When using this machine in environment in which PBX for connection to multiple phones for business use is
installed, perform the following PBX setting.
NOTE: Before connecting this machine to PBX, it is recommended to contact the company that installed the
PBX system to request connection of this machine. Note that correct operation cannot be guaranteed in
environment in which this machine is connected to PBX because the functions of this machine may be
restricted.
PBX Setting
Setting
value
Item
Description
6
PSTN
Use when connecting this machine
to a public switched telephone
network (default).
PSTN/PBX
setting
PBX
Use when connecting this machine
to PBX.
Outside call
number
setting
0 - 9
00 - 99
Set a number to access an outside
line. For the number, contact the
PBX administrator.
1
2
3
4
5
6
7
8
9
Refer to Basic Operation Procedure on page 6-7.
Press the U or V key to select [FAX Call Set.].
Press the OK key.
Press the U or V key to select [Exchange Select.].
Press the OK key.
Press the U or V key to select [PBX].
Press the OK key.
Press the U or V key to select [Dial No. to PSTN].
Press the OK key.
10 Use the numeric keys to enter the number to
access the outside line.
11 Press the OK key.
12 Press [Exit] (the Right Select key).
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 FAX Operation (Basic)
This chapter explains the following basic operations.
• Automatic Send ........................................................................................................... 3-2
• FAX Automatic Reception............................................................................................ 3-9
• Cancelling Communication........................................................................................ 3-12
• Using the Address Book............................................................................................ 3-15
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Automatic Send
General transmission using the numeric keys is explained.
Switching to the Send Screen
Part that is operated
1
Press the FAX key. Check that the basic send
screen is displayed.
Ready to send.
2010/05/25 12:30
NOTE: Depending on the settings, the Address Book
screen may appear. In this event, press Reset to
display the basic screen for sending.
Text+Photo 200x100dpi
[Orig.Img] [FAX Res.]
In addition to fax, you can include e-mail transmission
and/or folder (SMB/FTP) transmission in a single
transmission job (Multi Sending). Press the Send key to
select the destinations. For details, refer to Sending in
the Operation Guide for the machine.
Selection of Transmission Method
2
There are two transmission methods - memory
transmission and direct transmission. The default
is memory transmission.
To select direct transmission, use the following
procedure.
1
2
Press the Function Menu key.
Press the U or V key to select [FAX Direct
Function Menu:
7
8
a b
JobFinish Notice
FAX Delayed TX
TX].
9
*********************
FAX Direct TX
[ Exit ]
3
Press the OK key.
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
4
5
Press the U or V key to select [On].
Press the OK key.
Setting for Direct
transmission
Description
Starts memory transmission.
3
Off
After originals are scanned into memory, the communication starts.
On
Starts direct transmission.
Dials the receiving system, and after the communication has
started, originals are scanned.
NOTE: In direct transmission, you can designate only
one destination for one transmission.
Memory Transmission (When originals are placed in the document processor)
After originals placed in the document processor are scanned and stored in the memory, the receiving system
is dialed. This method is very convenient because you can have originals returned to you without waiting for
sending of the originals to be completed. It is suitable for sending multiple-page sheet originals.
Memory Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After
originals placed on the glass surface are scanned and stored in the memory, the receiving system is dialed.
NOTE: When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been stored in memory. Every time one page is scanned, you perform an operation to allow
continued scanning, and after all the originals have been stored in memory, the receiving system is dialed.
Direct Transmission (When originals are placed in the document processor)
After the telephone line has connected with the receiving system, scanning of the originals placed in the
document processor starts. When multiple-page originals are placed, each page is scanned after the previous
one is sent.
Direct Transmission (When originals are placed on the glass surface)
This method is suitable for sending book originals that cannot be placed in the document processor. After the telephone
line has connected with the receiving system, the originals placed on the glass surface are scanned and sent.
NOTE: When continuous scan is set, you can continue with scanning of a next original after an original on the
glass surface has been sent. Every time one page is scanned, you perform an operation to allow continued
scanning.
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Placing Originals
3
Place the originals on the glass surface or in the
document processor. Refer to the machine’s
Operation Guide for placing originals.
Dial the Receiving System
4
Enter the fax number of the receiving system using
the numeric keys.
FAX No. Entry:
B b
*
NOTE: When you press the numeric keys to
enter numbers, the screen changes to the entry
screen for the fax number.
[ Chain ] [ Detail ]
NOTE: Up to 64 digits can be entered as the fax
number of the receiving system.
Spaces will be automatically inserted if you use Z
at the end of the row to advance the cursor before
entering more characters.
Use Y or Z to move the cursor.
To correct the number, press the Clear key to
delete the digits one by one before reentering the
number. To delete all entered digits and return to
the default screen, press the Reset key.
Address Recall/Pause
Pressing this key adds about three seconds of
waiting time during dialing. For example, when
dialing the receiving system on an external line,
you can use this method to insert a pause before
resuming dialing after you dial a specific number.
Make detailed settings for sending as necessary.
Press [Detail] (the Right Select key) to display the
FAX Detail menu. Press the Y or Z key to select
[Sub Address], [Encrypted TX], [TX Start Speed] or
[ECM] and change settings, and then press the OK
key.
FAX No. Entry:
0123456789
A b
*
[ Chain ] [ Detail ]
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Key
Description
Sub Address
To communicate using the sub address, press
this key. For details, refer to Sub Address
3
Encrypted TX
To send faxes using encryption, press this key.
TX Start Speed
If a communication error occurred, press this key
to change the TX Start Speed. Select the speed
from 33,600 bps, 14,400 bps, and 9,600 bps.
ECM
ECM (error correction mode) is a function to
automatically resend an image that has not been
correctly sent or received due to the effects of
noise on the telephone line during transmission.
To change the ECM communication setting, press
this key.
On Hook
Press this key to connect to the telephone line.
When the FAX number has been entered, the machine
starts dialing to the receiving system.
After pressing this key, you can dial the number of the
receiving system using the numeric keys. For details,
Dialing methods without using the numeric keys
•
•
•
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Selecting the Resolution
5
Select the resolution suitable for sending originals.
•200 × 100 dpi (Normal): when sending originals
with standard size characters
Typical character size: 10.5 point (example:
Resolution Resolution)
•200 × 200 dpi (Fine): when sending originals with
relatively small characters and thin lines
Typical character size: 8 point (example:
Resolution Resolution)
•200 × 400 dpi (Super Fine): when sending
originals with minute characters and lines
Typical character size: 6 point (example: Resolution
Resolution)
•400 × 400 dpi (Ultra Fine): when sending
originals with minute characters and lines more
finely
Typical character size: 6 point (example: Resolution
Resolution)
NOTE: The default setting is 200 × 100 dpi (Normal).
The higher the resolution, the clearer the image.
However, higher resolution also means longer send
times. Normally, 400 × 400 dpi (Ultra Fine) is
recommended.
The scan resolution should be equal to or higher than
the fax resolution. If the selected resolutions are not in
this condition, the machine automatically adjusts the
resolution and changes the selection.
1
2
Press the Function Menu key.
Press the U or V key to select [FAX
Resolution].
3
4
Press the OK key.
Press the U or V key to select the desired
FAX Resolution:
a b
*********************
resolution.
1
*200x100dpi Norm.
2
3
200x200dpi Fine
200x400dpi S.Fin
5
Press the OK key.
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
IMPORTANT:
•If you select a high resolution, the image
becomes clearer. However, the higher the
resolution is, the longer the send time is.
•When you send originals at a resolution of 200 ×
400 dpi (Super Fine) or higher, the fax machine
on the receiving system needs to be capable of
receiving the originals at such image quality.
When the receiving system does not have
such capability, originals are sent at an image
quality of 200 × 200 dpi (Fine).
3
Selecting the Density
6
Adjusting the density when scanning originals
•Manual (-3 to +3): You can adjust the density
using seven levels.
•Auto: The optimal density is chosen according to
the density of the originals.
1
2
3
4
Press the Function Menu key.
Press the U or V key to select [Density].
Press the OK key.
Press the U or V key to select [Auto] or
Density:
*Auto
2
a b
[Manual].
1
*********************
Manual
5
6
Press the OK key. Proceed to the next step if
you selected [Manual] in step 4.
Press the U or V key to select the desired
Manual:
a b
*********************
density.
1
u
Lighter -3
2
3
v
w
Lighter -2
Lighter -1
7
Press the OK key.
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Send Start
7
Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Checking the Send Status
1
Press the Status/Job Cancel key.
2
3
Press the U or V key to select [Send Job
Status].
Press the OK key. A list of send job statuses
Send Job Status: a b
0010 0667643333
appears.
b
*********************
r
0011
0017
p
Broadcast
0324256345
b
[ Cancel ] [ Menu ]
Cancelling the Transmission
1
In the above screen for checking send jobs,
press the U or V key to select the job you
want to cancel.
2
Press [Cancel] (the Left Select key).
Send Job Status: a b
0010
0011
b
0667643333
Broadcast
r
p
0017
b
*********************
0324256345
[ Cancel ] [ Menu ]
3
Press [Yes] (the Left Select key). This
cancels the transmission.
NOTE: Pressing the Stop key on the operation
panel while originals are being scanned cancels
the transmission.
3-8
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
FAX Automatic Reception
When using this machine as a FAX-dedicated machine that does not receive telephone calls, set the machine
to FAX-dedicated reception. No special operation is required when receiving faxes.
NOTE: When you are receiving DRD service from a telephone company, change the reception method to
3
Part that is operated
Reception Method
This machine allows the following five reception methods.
•
•
•
•
•
Auto (Normal)
Checking and Changing the Reception Method
1
Press the System Menu/Counter key.
2
3
4
5
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
6
Press the U or V key to select [RX Settings].
Reception:
a b
4
5
Rings(FAX/TEL)
Forward Settings
6
*********************
RX Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Auto(Normal)].
RX Settings:
a b
*********************
1
*Auto(Normal)
2
3
Auto(FAX/TEL)
Auto(TAD)
9
1
Press the OK key.
Reception Starts
When a fax has been sent to you, the machine
rings the registered number of times, and then
starts receiving the fax.
After reception has started, the Processing
indicator blinks.
NOTE: You can change the number of times the
Reception Print
2
Received originals are output on the top tray with
the print side facing downward. Up to 150 sheets
of plain paper (80 g/m²) can be held on the top tray.
However, the number of sheets varies with the
condition of the paper to be used.
IMPORTANT:
When the number of sheets to be printed exceeds the
number of sheets that can be held, remove all the
paper on the top tray.
3-10
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Memory Reception
When the machine cannot print a fax due to paper
running out or a paper jams, it temporarily stores
originals that have been sent in the image memory.
When the machine returns to the printable state,
printing starts.
3
During memory reception, FAX Reception Printing Jobs
are displayed on Printing Jobs of the Status screen. To
print the received originals, supply paper or remove
jammed paper.
NOTE: For the Status screen, refer to the machine’s
Operation Guide.
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Cancelling Communication
The method for cancelling communication with this machine differs depending on the transmission method
(memory transmission or direct transmission) and communication form. Methods of cancelling in various cases
are explained here.
Cancelling Memory Transmission (while originals are being scanned)
During memory transmission, to cancel scanning of
originals, press the Stop key on the operation panel.
Scanning of originals is canceled, and the originals are
ejected. When originals remain in the document
processor, take them out from the original output table.
Cancelling Memory Transmission (during communication)
During memory transmission, to cancel communication after it has started following the completed scanning of
originals, use the following procedure.
NOTE: If user management is set to On, the administrator or the user who performs the memory transmission
can be canceled the job.
You can cancel transmission by disconnecting the telephone line. For details, refer to Cancelling Transmission
1
Press the Status/Job Cancel key.
2
3
4
Press the U or V key to select [Send Job Status].
Press the OK key.
Press the U or V key to select the job you want to
cancel.
5
Press [Cancel] (the Left Select key).
Send Job Status: a b
0010
0011
b
0667643333
Broadcast
r
p
0017
b
*********************
0324256345
[ Cancel ] [ Menu ]
6
Press [Yes] (the Left Select key). Communication
is canceled.
NOTE: Canceling is also possible by pressing [Menu]
(the Right Select key), then selecting [Cancel Job]
and pressing the OK key.
3-12
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Cancelling and Sending Delayed Transmissions (Queued)
To cancel delayed transmissions that are queued, or to send delayed transmissions immediately rather than
waiting for the specified time, use the procedure below.
1
Press the Status/Job Cancel key.
3
2
3
4
Press the U or V key to select [Scheduled Job].
Press the OK key.
Press the U or V key to select the job you want to
cancel. Or, select the job you want to send
immediately.
5
Press [Menu] (the Right Select key).
Scheduled Job:
a b
0011
0017
b
b
Broadcast
0324256345
0018
b
*********************
0756545865
[ Cancel ] [ Menu ]
6
Press the U or V key to select [Cancel Job]. Or,
select [Start Now] to send the job immediately.
7
8
Press the OK key.
Press [Yes] (the Left Select key). Communication
is canceled. Or, communication starts if sending
the job immediately.
Cancelling Direct Transmission
During direct transmission, to cancel communication during transmission, press the Stop key on the operation
panel. The originals that have been scanned are ejected, and the screen returns to the default screen for
sending. When originals remain in the document processor, take them out.
Cancelling Transmission (Disconnection of Communication)
When you cancel sending or receiving by disconnecting the telephone line during communication, use the
following procedure.
1
Press the Status/Job Cancel key.
2
3
Press the U or V key to select [FAX].
Press the OK key.
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
4
5
Press [Line Off] (the Left Select key).
FAX:
b
Sending...
[Line Off][ Log ]
Press [Yes] (the Left Select key). This disconnects
the line in communication.
Cancelling Polling Transmissions
To cancel a polling transmission, delete the polling transmission original saved in the polling box. For
information on how to delete the saved original, refer to Deleting Originals in a Polling Box on page 4-49.
3-14
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Using the Address Book
You can select the FAX destination from the Address Book.
Part that is operated
3
Registering a New Destination
You can register new destinations to the Address Book. There are two registration methods - contact
registration; and, group registration for registering several contact registrations as a unit.
Contact Registration (fax)
Up to 100 destinations can be registered. Destination name, fax number, sub address communication,
encryption, transmission start speed, and ECM communication can be registered for each destination.
1
2
3
4
Press the System Menu/Counter key.
Press the U or V key to select [Edit Destination].
Press the OK key.
Press the U or V key to select [Address Book].
Edit Destination: a b
Address Book
1
*********************
2
Print List
[ Exit ]
5
6
Press the OK key.
Press [Menu] (the Right Select key).
Address Book:
a b
*********************
k
Design
l
l
Fiala
Maury
[ Menu ]
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
7
Press the U or V key to select [Add Address].
Menu:
a b
1
2
Detail/Edit
Delete
3
*********************
Add Address
[ Exit ]
8
9
Press the OK key.
Press the U or V key to select [Contact].
10 Press the OK key.
11 Press the Y or Z key to select [Address Number].
Detail:
C b
Address Number: 7/ 7
053
[ Edit ]
12 Press [Edit] (the Right Select key).
13 Use the numeric keys to enter any address number
Address Number:
(001 - 120)
*****053*
D b
between 001 and 120.
NOTE: An address number is an identification
number for each destination. You can select any
available number out of 120 numbers - 100 for
individuals and 20 for groups.
14 Press the OK key.
15 Press the Y or Z key to select [Contact Name].
Detail:
Contact Name
C b
1/ 7
[ Edit ]
16 Press [Edit] (the Right Select key).
17 Use the numeric keys to enter the destination
name to be displayed in the Address Book. Up to
32 characters can be entered.
Contact Name:
Sally
A b
*
S
ABC
[ Text ]
NOTE: For details on character entry, refer to
18 Press the OK key.
3-16
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
19 Press the Y or Z key to select [FAX Number].
Detail:
C b
3/ 7
b
FAX Number:
0667640000
[ Edit ]
3
20 Press [Edit] (the Right Select key).
21 Use the numeric keys to enter the destination FAX
FAX No. Entry:
0667640000
A b
number. Up to 32 digits can be entered.
*
S
NOTE: For details on character entry, refer to
[ Detail ]
Address Recall/Pause
Pressing this key adds about three seconds of waiting
time during dialing. For example, when dialing the
receiving system on an external line, you can use this
method to insert a pause before resuming dialing after
you dial a specific number.
22 Press [Detail] (the Right Select key) and then use
the Y or Z key to select [Sub Address]. If you do
not use Sub Address, proceed to step 28.
FAX Detail:
C b
1/ 4
Sub Address:
1234567890123
OOOOOOOOOO
[ Edit ]
23 Press [Edit] (the Right Select key).
24 Use the numeric keys to enter the sub address. Up
Sub Address:
1234567890123
C b
to 20 digits can be entered.
V
S
NOTE: A sub address can be entered using numerals
from 0 to 9, spaces, and characters "#" and "*".
25 Press the OK key.
26 Use the numeric keys to enter the sub address
password. Up to 20 digits can be entered.
NOTE: A sub address password can be entered using
numerals from 0 to 9, alphabets, spaces, and
characters "#" and "*".
27 Press the OK key.
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
28 Use the Y or Z key to select [Encrypted TX]. If you
FAX Detail:
Encrypted TX:
Key 02
C b
2/ 4
do not use Encrypted TX, proceed to step 38.
0000
[ Change ]
29 Press [Change] (the Right Select key).
30 Press the U or V key to select [On].
Encryption:
*Off
a b
*********************
1
2
On
31 Press the OK key.
32 Press the U or V key to select the desired
encryption key number.
33 Press the OK key.
NOTE: Register the encryption key in advance. For
details, refer to Registering an Encryption Key on
34 Press the U or V key to select [On] or [Off].
Encryption Box:
*Off
a b
*********************
1
2
On
35 Press the OK key. Proceed to the next step or step
38 when [On] or [Off] is selected in step 34,
respectively.
36 Use the numeric keys to enter the encryption box
number (4 digits).
37 Press the OK key.
3-18
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
38 Use the Y or Z key to select [TX Start Speed] or
[ECM] and change settings as necessary, and then
press the OK key.
FAX Detail:
TX Start Speed: 3/ 4
33600bps
C b
[ Change ]
3
Key
Description
TX Start Speed
To change the transmission start speed, press
this key. Select the speed from 33,600 bps,
14,400 bps, and 9,600 bps.
ECM
ECM (error correction mode) is a function to
automatically resend an image that has not
been correctly sent or received due to the
effects of noise on the telephone line during
transmission. To change the ECM
communication setting, press this key.
39 Use the Y or Z key to check if each item was
entered correctly.
40 Press the OK key.
41 Press the OK key again.
42 Use the Y or Z key to check if the destination was
set correctly.
43 Press the OK key. The destination is added to the
Address Book.
Group Registration
You can register several destinations that have been registered to be contacted as a unit. This method is
convenient because several destinations can be designated at one time. Up to 20 groups can be registered.
NOTE: Group registration requires destinations that have been registered as contact registration. Perform the
necessary contact registration in advance.
1
2
3
Press the System Menu/Counter key.
Press the U or V key to select [Edit Destination].
Press the OK key.
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
4
Press the U or V key to select [Address Book].
Edit Destination: a b
Address Book
1
*********************
2
Print List
[ Exit ]
5
6
Press the OK key.
Press [Menu] (the Right Select key).
Address Book:
a b
*********************
k
Design
l
l
Fiala
Maury
[ Menu ]
7
Press the U or V key to select [Add Address].
Menu:
a b
1
2
Detail/Edit
Delete
3
*********************
Add Address
[ Exit ]
8
9
Press the OK key.
Press the U or V key to select [Group].
10 Press the OK key.
11 Press the Y or Z key to select [Address Number].
Detail:
C b
Address Number: 4/ 4
019
[ Edit ]
12 Press [Edit] (the Right Select key).
13 Use the numeric keys to enter any address number
Address Number:
(001 - 120)
*****053*
C b
between 001 and 120.
NOTE: An address number is an identification
number for each destination. You can select any
available number out of 120 numbers - 100 for
individuals and 20 for groups.
14 Press the OK key.
3-20
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
15 Press the Y or Z key to select [Group Name].
Detail:
Group Name:
C b
1/ 4
[ Edit ]
3
16 Press [Edit] (the Right Select key).
17 Use the numeric keys to enter the group name to
be displayed in the Address Book. Up to 32
characters can be entered.
Group Name:
GUI Section
S
A b
*
ABC
[ Text ]
NOTE: For details on character entry, refer to
18 Press the OK key.
19 Press the Y or Z key to select [Group Member].
Detail:
Group Member:
30
C b
3/ 4
[ Edit ]
20 Press [Edit] (the Right Select key).
21 Press [Menu] (the Right Select key).
Group Member:
a b
p
b
G
Morgan
Morgan
Sally
[ Menu ]
22 Press the U or V key to select [Add Member].
23 Press the OK key.
24 Press the U or V key to select the destination
(individual) you want to register to the group.
NOTE: You can search for a destination by
destination name.
25 Press the OK key.
26 Press [Menu] (the Right Select key).
27 Press the U or V key to select [Select].
3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
28 Press the OK key.
29 To add more destinations, repeat steps 21 to 28.
30 Press the Back key.
31 Use the Y or Z key to check if the group was set
correctly.
32 Press the OK key. The group is added to the
Address Book.
3-22
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Selecting a Destination from the Address Book
Select a destination registered in the Address Book.
1
In the basic screen for sending, press the Address
Book key.
Ready to send.
2010/01/01 12:30
3
Text+Photo 200x100dpi
[Orig.Img] [FAX Res.]
2
Press the U or V key to select [Address Book].
Select Addr Book: a b
t
*********************
Address Book
t
Ext Address Book
[ Exit ]
3
4
Press the OK key.
Press the U or V key to select the desired
destination.
Address Book:
a b
*********************
k
Design
l
l
Fiala
Maury
[ Menu ]
5
Press the OK key. The selected destination is
registered in the destination list.
Searching for a Destination
You can search for a destination registered in the Address Book.
1
In the basic screen for sending, press the Address
Book key.
2
3
4
5
Press the U or V key to select [Address Book].
Press the OK key.
Press [Menu] (the Right Select key).
Press the U or V key to select [Search(Name)].
Menu:
a b
1
2
Select
Detail
Search(Name)
3
*********************
6
Press the OK key.
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
7
Use the numeric keys to enter the destination
name for which you want to search.
Search(Name):
ma
A b
*
S
NOTE: For details on character entry, refer to
ABC
[ Text ]
8
Press the OK key. The search result appears.
Changing/Deleting Registration Contents
You can change or delete the contents of destinations (contact) or groups.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [Edit Destination].
Press the OK key.
Press the U or V key to select [Address Book].
Press the OK key.
Press the U or V key to select the destination or
group to edit.
Address Book:
a b
*********************
k
Design
l
l
Fiala
Maury
[ Menu ]
7
8
Press [Menu] (the Right Select key).
When editing the destination of a contact
registration
1
2
3
Press the U or V key to select [Detail/Edit].
Press the OK key.
Change the contents of the destination. For
details, refer to steps 11 to 39 in Contact
Registration (fax).
When editing a group
1
2
3
Press the U or V key to select [Detail/Edit].
Press the OK key.
Change the contents of the group. For details,
refer to steps 11 to 18 in Group Registration.
When adding more destinations to the group,
refer to steps 19 to 28 in Group Registration.
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
When deleting the destination of a contact
registration or group
1
2
3
Press the U or V key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). This deletes
the selected destination or group.
3
9
Press the OK key.
10 Press [Yes] (the Left Select key). The change or
deletion of the registration contents is reflected on
the Address Book.
Printing Address List
You can print the list of destinations registered in the Address Book.
You can sort the list in the order of names or address numbers of the destinations.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [Edit Destination].
Press the OK key.
Press the U or V key to select [Print List].
Press the OK key.
Press the U or V key to select [FAX List(Index)] or
[FAX List(No.)].
7
8
Press the OK key.
Press [Yes] (the Left Select key). The list is
printed.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Using One-touch Keys
With One-touch keys on the operation panel, you can invoke the Address Book.
Part that is operated
Registering a New One-touch Key
You can register the destination (contact or group) in the Address Book to a One-touch key. Up to 22
destinations can be registered.
1
Press the One-touch key that you want to register
and hold it (2 seconds).
2
Press the U or V key to select the number to
which you want to register the destination.
Numbers 12 to 22 are the One-touch key numbers
when the Shift Lock key is pressed.
Select Key No.:
No. 1
a b
*********************
1
2
No. 12
[ Exit ]
3
4
Press the OK key.
Press the U or V key to select the destination
(individual or group) you want to register to the
One-touch key from the Address Book.
5
Press the OK key. The destination is added to the
One-touch key.
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Selecting a Destination by One-touch Key
In the destination entry screen, press the One-touch
key where the destination is registered.
When recalling from One-touch keys 12 to 22, press
the Shift Lock key to turn on the lamp next to the keys,
and then press the One-touch key where the
destination is registered.
3
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Changing/Deleting Registration Contents
You can change the destination registered to a One-touch key to another destination, or delete the registration
contents of the One-touch key.
NOTE: When changing the destination information in the Address Book, the information registered to the
One-touch key is updated.
1
2
Press the One-touch key that you want to change
and hold it (2 seconds).
Press the U or V key to select the number you
want to edit.
Select Key No.:
No. 1
2
a b
1
*********************
No. 12
Numbers 12 to 22 are the One-touch key numbers
when the Shift Lock key is pressed.
[ Exit ]
3
4
Press the OK key.
When changing the destination to another
destination
1
2
3
Press the U or V key to select [Edit].
Press the OK key.
Press the U or V key to select the new
destination (individual or group).
4
5
Press the OK key.
Press [Yes] (the Left Select key). The
destination is registered to the One-touch
key.
When deleting registration contents
1
2
3
Press the U or V key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). This deletes
the content registered to the One-touch key.
5
Press [Exit] (the Right Select key).
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
Dialing the Same Receiving System (Redial)
Redial is a function allowing you to dial the last entered number once again.
Automatic Redial
This function automatically redials a receiving system that does not respond when you try to send fax.
3
No particular setting is required for automatic redial. Because the machine redials repeatedly at a regular
interval, you do not need to worry even when the communication by the receiving system is prolonged.
NOTE: When using direct transmission, the machine does not automatically redial.
You can change the number of automatic redials from between 0 and 14. For details, refer to Retry Times on
You cannot send delayed transmission immediately while the machine is waiting for redial.
Manual Redial (Recall)
Use this when the receiving system does not respond when you have tried to send a fax. When you want to
send the fax to the same receiving system, press the Address Recall/Pause key, and you can call the receiving
system you dialed on the destination list.
1
Press the Address Recall/Pause key. The
receiving system you dialed is displayed on the
destination list.
Ready to send.
Dest.: 1
:0987654321
b
Text+Photo 200x100dpi
[Orig.Img] [FAX Res.]
NOTE: When the last transmission included multi-
address transmissions and computers and e-mail
destinations, they are also displayed. If necessary, add
or delete the receiving system.
2
Press the Start key. The transmission will start.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Recall information is canceled in the following
conditions.
•
•
When you turn the power off
When you send a next fax (new recall information is
registered)
•
When you log out
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Basic)
3-30
Download from Www.Somanuals.com. All Manuals Search And Download.
4 FAX Operation (Advanced)
This chapter explains the method to effectively use FAX.
• Delayed Transmission................................................................................................. 4-2
• Broadcast Transmission.............................................................................................. 4-4
• Standby Transmission ................................................................................................. 4-6
• Interrupt Send.............................................................................................................. 4-7
• Chain Dial.................................................................................................................... 4-8
• Manual Send ............................................................................................................. 4-10
• Manual Reception...................................................................................................... 4-12
• Remote Switch Function............................................................................................ 4-14
• Sub Address Communication.................................................................................... 4-32
• Sub Address Box Function........................................................................................ 4-35
• Program Dial.............................................................................................................. 4-41
• Polling Communication.............................................................................................. 4-43
• Account Management................................................................................................ 4-51
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Delayed Transmission
When you have set a transmission start time, this function automatically sends originals at the preset time. You
can use delayed transmission together with the broadcast transmission function, etc.
The method for sending originals to one destination after setting the start time is explained here.
IMPORTANT: If the current time is incorrect, the communication cannot be performed correctly at the specified
time. If the indicated current time is incorrect, adjust the time correctly. In this case, adjust the time. For details,
NOTE: You cannot select direct transmission.
Set the time from between 00:00 and 23:59 in one-minute increments.
Together with standby transmission and interrupt send, you can set up to 30 destinations for delayed transmission.
When two or more delayed transmissions are set for the same time, the communication will start in the order
that the delayed transmissions have been set. When delayed transmissions have been set in reverse order,
however, sending of originals to be sent to the same destination is prioritized over the ones to be sent to different
destinations.
You can cancel a delayed transmission any time before the specified transmission time. You can also send a
delayed transmission before the specified time. (Refer to Cancelling and Sending Delayed Transmissions
You can change destinations of a delayed transmission any time before the specified transmission time. (Refer
Batch Transmission Function
When fax originals to be sent to the same destination are set to the same transmission start time with delayed
transmission, you can send up to 10 groups of originals using batch transmission. This function prevents
repeated communication to the same destination and reduces the communication cost.
NOTE: You cannot send originals as a batch transmission in the case of direct transmission.
You cannot select destinations using a combination of direct entry and One-touch keys.
In the case of broadcast transmission, when you have set two or more groups of originals to the same
transmission start time, and each group includes the same receiving system fax number, you cannot send the
originals as a batch transmission.
When the transmission start time has come, and there are fax originals waiting for redial to the same receiving
system, the waiting originals are also sent together as a batch transmission.
When job accounting is ON, only the originals with the same account ID set using delayed transmission are sent
as a batch transmission.
1
2
3
4
5
6
Press the FAX key.
Place the originals.
Press the Function Menu key.
Press the U or V key to select [FAX Delayed TX].
Press the OK key.
Press the U or V key to select [On].
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
7
8
Press the OK key.
Press the Y or Z key to move the cursor position,
and enter hours and minutes.
Start Time:
Hour Min.
***11*: 45
(Current Time 11:45)
a b
9
Press the OK key.
4
10 Set the destination, and press the Start key.
Originals are scanned, and transmission begins at
the preset time.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Checking Scheduled Job
You can check the details of a scheduled job.
NOTE: For cancelling memory transmission or sending a scheduled job immediately, refer to Cancelling
1
2
3
4
Press the Status/Job Cancel key.
Press the U or V key to select [Scheduled Job].
Press the OK key.
Press the U or V key to select the job you want to
check.
5
Press [Menu] (the Right Select key).
Scheduled Job:
a b
*********************
0011 Broadcast
b
0017
0018
b
b
0324256345
0756545865
[ Cancel ] [ Menu ]
6
7
8
9
Press the U or V key to select [Detail].
Press the OK key.
Press the
Y
or
Z
key to check the details of the job.
Press the OK key.
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Broadcast Transmission
This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the
set destination afterwards.
NOTE: You can send originals to up to 100 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.
In addition to fax, you can include e-mail transmission and/or folder (SMB/FTP) transmission in a single
transmission job (Multi Sending). Press the Send key to select the destinations. For details, refer to Sending in
the Operation Guide for the machine.
1
2
3
Press the FAX key.
Place the originals.
Select the destination.
Enter the fax number
1
Use the numeric keys to enter the fax number.
NOTE: When On is selected in Entry Check for
New Destination, a confirmation screen is
displayed for the entered FAX number. Re-enter
the same FAX number and press the OK key. For
details, refer to Destination confirmation screen
before transmission in the Operation Guide for the
machine.
2
Press the OK key. You can enter the next fax
number.
Select the destination from the Address Book
1
2
Press the Address Book key.
Press the U or V key to select [Address
Book].
3
4
Press the U or V key to select the desired
destination.
Press the OK key. You can select the
destination by pressing the Address Book
key.
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary
destinations are registered.
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
the Address Book on page 3-15. For details of One-
touch keys, refer to Using One-touch Keys on page 3-
26.
You can select destinations using a combination of
direct entry, the Address Book and One-touch keys.
4
After selecting all the destinations, press the Start
key. Transmission begins.
4
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Standby Transmission
During a communication, you can scan originals and schedule a next transmission. When the first
communication is completed, the machine automatically starts the scheduled next transmission. When using
standby transmission, you do not need to wait when a communication has prolonged due to broadcast
transmission.
NOTE: Together with delayed transmission, up to 30 transmissions can be scheduled.
You can use other functions such as broadcast transmission.
For the transmission method, use memory transmission. To select memory transmission, refer to Selection of
1
2
3
Press the FAX key.
Place the originals.
Select the destination, and set transmitting
functions if you want to use any.
4
Press the Start key. Scanning of the originals
starts, and the next transmission is scheduled.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
5
When the communication is completed, the
scheduled transmission will begin.
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Interrupt Send
During communication, when you scan originals by selecting direct transmission, you can use interrupt send.
Even when the communication is prolonged due to broadcast transmission or a next transmission being
scheduled, the machine will first send originals for which interrupt send has been set.
NOTE: When the number of standby transmissions and delayed transmissions has already reached 30, you
cannot use interrupt send.
Depending on the timing of the interruption, you may not be able to interrupt transmission immediately.
4
1
2
3
4
5
6
7
8
Press the FAX key.
Load the originals to be sent using Interrupt Send.
Press the Function Menu key.
Press the U or V key to select [FAX Direct TX].
Press the OK key.
Press the U or V key to select [On].
Press the OK key.
Set the destination, and press the Start key. The
panel display will switch to the standby screen, and
the transmission will start when transmission
becomes possible.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
For operation of direct transmission, refer to Selection
To cancel transmission while waiting for interrupt send,
press the Stop key on the operation panel. For details,
9
When the interrupt send is completed, the
canceled communication and standby
transmission will automatically resume.
4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Chain Dial
Chain dial is a function that allows you to dial by linking fax numbers of the receiving systems with a chain
number created with a number common to several destinations. By setting a toll free number and an area code
to a chain number, you do not need to enter such numbers for each transmission.
NOTE: You can use the chain number at the head of the fax number of the receiving system.
As an example, when using ‘212’ as the chain number
1
2
3
4
Press the FAX key.
Place the originals.
Enter ’212’ using the numeric keys.
Press [Chain] (the Left Select key).
Fax No. Entry:
212
A b
*
[ Chain ] [ Detail ]
5
Enter the fax number to connect to the chain
number.
Use the numeric keys to enter a fax number
1
’212’ is already entered, and then enter the
fax number.
NOTE: When On is selected in Entry Check for
New Destination, a confirmation screen is
displayed for the entered FAX number. Re-enter
the same FAX number and press the OK key. For
details, refer to Destination confirmation screen
before transmission in the Operation Guide for the
machine.
2
After entering all the destinations, press the
OK key.
Select fax number from the Address Book
1
2
Press the Address Book key.
Press the U or V key to select [Address
Book], and press the OK key.
4-8
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
NOTE: If extended address book is not
registered, Address Book Selection screen is not
displayed. The list of destinations appears.
3
4
Press the U or V key to select the desired
destination.
Press the OK key. ’212’ is automatically
added to the destination.
4
Select fax number from One-touch key
Select the destination from One-touch keys. The
chain number ‘212’ is automatically added to the
destinations.
6
Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Manual Send
This method allows you to send originals by pressing the Start key after confirming that the telephone line has
connected to the receiving system. Connecting a telephone set (commercially available product) to this machine
enables you to talk with the person at the receiving system before sending originals.
Using after Confirming the Connection to the Receiving System
You can send originals after confirming that the telephone line has connected to the receiving system.
1
2
3
4
Press the FAX key.
Set the originals.
Press the On Hook key.
Use the numeric keys to enter the number of the
receiving system.
NOTE: To cancel the operation, press On Hook key
or Reset key.
5
When you hear the fax tone, the telephone line has
connected to the receiving system. Press the Start
key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Using a Telephone to Send
When you want to talk to the person at the receiving system or the receiving system needs to switch to fax, use
this method to send originals.
1
2
Set the originals.
Lift the handset, and dial the number of the
receiving system.
3
Check if the telephone line has connected to the
fax of the receiving system.
When you hear the fax tone
The receiving system is on fax.
1
Press the FAX key.
2
3
Press the On Hook key.
Press the Start key. Transmission begins.
4-10
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the receiving system. When the conversation is
over, follow steps 1 to 3 above.
4
When sending starts (when the Processing
indicator on the operation panel starts blinking),
return the handset to its original position.
4
4-11
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Manual Reception
This method allows you to receive faxes by operating this machine after confirming that the telephone line has
connected to the sending system. Connecting a telephone set (commercially available product) to this machine
enables you to receive originals after talking to the person at the sending system.
Part that is operated
NOTE: FAX Automatic Reception has been preset for the receiving mode of this machine. To use Manual
Reception, you need to change the receiving mode to Manual Reception. To change to manual mode, refer to
Receiving after Confirming Connection to the Sending System
You can receive originals after confirming by sound that the telephone line has connected to the sending
system.
1
When there is an incoming call, the machine
makes a ringing tone.
2
3
4
Press the FAX key.
Press the On Hook key.
Press [ManualRX] (the Left Select key).
On Hook:
*
[Manual RX]
5
After the sending side has started transmission,
the machine starts receiving the originals.
Using the Telephone to Receive
Use this method when you want to receive originals after talking to the person at the sending system.
1
When there is an incoming call, the telephone
connected to the machine makes a ringing tone.
4-12
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
2
3
Lift the handset of the telephone.
Check if the telephone line has connected to the
fax of the sending system.
When you hear the fax tone
The sending system is on fax.
1
2
3
Press the Status/Job Cancel key.
Press the On Hook key.
4
Press [ManualRX] (the Left Select key).
On Hook:
Reception will start.
*
NOTE: When using a telephone set that can
send tone signals, use the telephone to start the
reception of originals with the remote switch
function. (Refer to Remote Switch Function on
[Manual RX]
When you hear a voice from the receiving
system
The telephone line has connected to the telephone
of the sending system. When the conversation is
over, follow steps 1 to 2 above.
After the sending system has started transmission,
the machine starts receiving originals.
4
When reception starts (when the Processing
indicator on the operation panel starts blinking),
return the handset to its original position.
4-13
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Remote Switch Function
You can start fax reception by operation from the connected telephone set. This function is convenient for using
this machine and a telephone set (commercially available product) in combination installed at places distant
from each other.
To start fax reception by operation from the connected telephone set, use the following operation.
NOTE: In order to use remote switch, it is necessary to connect the tone signal-sending telephone set
(commercially available product) to the machine. However, even if it is a tone signal-sending telephone set,
this function may not be used satisfactorily depending on the type of telephone set. For details, contact our
agent or the store where you purchased this machine.
How to Register Remote Switch Dial
Remote switch dial is set to 55 at the factory, but you can change the dial number.
1
2
3
4
5
6
7
8
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Remote SW Dial].
Press the OK key.
Use the numeric keys to enter the number to be
newly registered (00 to 99).
9
Press the OK key.
4-14
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Using the Remote Switch Dial
To start fax reception by operation from the connected telephone set, use the following operation.
1
The connected telephone set makes a ringing
tone.
4
2
Lift the handset of the telephone.
3
When you hear the fax tone from the handset,
enter the two-digit remote switch dial number using
the dial button on the telephone set.
NOTE: The remote switch dial is set to 55 at the
factory.
4
The telephone line switches to the machine, and
reception starts.
4-15
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Printing/Forwarding Received Documents (Memory Forwarding)
When you have received a fax, you can forward the received image to other fax machines and computers, or
print the image.
Part that is operated
Type of Forwarding Destination and Forwarding Requirements
Only one forwarding destination can be specified. When forwarding is set to [On], all received documents will
be forwarded to the specified destination.
Type of Forwarding Destination
You can forward the document to other fax machines or Sub Address Boxes, or for e-mail transmission or folder
(SMB or FTP) transmission.
Setting Forwarding
Use the procedure below to set forwarding.
1
2
3
4
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
4-16
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
5
6
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
4
Press the U or V key to select [Forwarding].
Forward Settings: a b
1
*********************
Forwarding
2
3
Forward Dest.
File Format
9
Press the OK key.
10 Press the U or V key to select [On] or [Off].
Forwarding:
*Off
2
a b
1
*********************
On
11 Press the OK key.
Registering Forwarding Destination
Use the procedure below to register a forwarding destination.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
Press the OK key.
4-17
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
8
9
Press the U or V key to select [Forward Dest.].
Forward Settings: a b
Forwarding
Forward Dest.
1
2
*********************
File Format
[ Exit ]
3
Press the OK key.
10 Press the U or V key to select [Register].
Forward Dest.:
Confirmation
a b
1
2 Register
*********************
[ Exit ]
11 Press the OK key.
12 Selecting Forwarding Destination from
Address Book
1
Press the U or V key to select [Address
Book].
2
3
Press the OK key.
Press the U or V key to select [Address
Book] or [Ext Address Book].
4
5
Press the OK key.
Press the U or V key to select the destination
(individual) you want to register as a
forwarding destination.
Entering Forwarding Destination Directly
1
Press the U or V key to select [Address
Entry].
2
3
Press the OK key.
Press the U or V key to select [FAX], [E-
mail], [Folder(SMB)] or [Folder(FTP)].
4
5
Press the OK key.
Use the numeric keys to enter the address to
be registered as a forwarding destination. Up
to 128 characters can be entered for e-mail
transmission, up to 64 digits can be entered
for fax transmission, and up to 64 digits can
be entered for file (SMB/FTP) transmission.
4-18
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
NOTE: For details on character entry, refer to
If you select [Folder(SMB)] or [Folder(FTP)], enter
the host name, path, login user name, login
password and encryption method of the forwarding
destination.
13 Press the OK key.
4
Changing and Deleting Registration Contents
Use the procedure below to change or delete registration contents.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Forward Dest.].
Forward Settings: a b
1
Forwarding
Forward Dest.
2
*********************
File Format
[ Exit ]
3
9
Press the OK key.
10 Press the U or V key to select [Confirmation].
Forward Dest.:
Confirmation
2
a b
1
*********************
Register
[ Exit ]
11 Press the OK key.
4-19
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
12 Press the OK key again.
13 Changing Forwarding Destination
1
2
3
4
Press the U or V key to select [Edit].
Press the OK key.
Change the forwarding destination.
Press the OK key. The forwarding destination
is changed.
Deleting Forwarding Destination
1
2
3
Press the U or V key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). The
forwarding destination is deleted.
14 Press [Exit] (the Right Select key).
Forwarding Time Setting
Register the start time and end time between which forwarding is enabled.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Forward Time].
Forward Settings: a b
4
5
Subject Add.Info
FTP Encrypted TX
6
*********************
Forward Time
[ Exit ]
9
Press the OK key.
4-20
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
10 Press the U or V key to select [All day] or [Preset
Forward Time:
*All day
a b
*********************
Time].
1
2
Preset Time
11 Press the OK key. Proceed to the next step if you
selected [Preset Time] in step 10.
4
12 Press the Y or Z key to move the cursor position,
and enter the hours and minutes of the start time.
13 Press the OK key.
14 Press the Y or Z key to move the cursor position,
and enter the hours and minutes of the end time.
15 Press the OK key.
NOTE: Enter the time on the 24 hours system.
File Format Setting (for Each Requirement)
If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF,
or XPS as the file format.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
Press the OK key.
4-21
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
8
9
Press the U or V key to select [File Format].
Forward Settings: a b
1
2
Forwarding
Forward Dest.
3
*********************
File Format
[ Exit ]
Press the OK key.
10 Press the U or V key to select [PDF], [TIFF] or
[XPS].
11 Press [Detail] (the Right Select key).
12 Press the U or V key to select [Off], [PDF/A-1a] or
[PDF/A-1b].
13 Press the OK key.
E-mail Subject Add. Info Setting
Specify whether any information will be added to the subject of the E-mail. When adding information, you can
select either Sender Name or Sender.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Subject Add.Info].
Forward Settings: a b
2
3
Forward Dest.
File Format
4
*********************
Subject Add.Info
[ Exit ]
9
Press the OK key.
4-22
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
10 Press the U or V key to select [Off], [Sender
Name] or [Sender FAX/Add.].
11 Press the OK key.
FTP Encrypted TX Setting
Specify whether to use FTP encryption when you send data.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
4
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [FTP Encrypted
TX].
Forward Settings: a b
3
4
File Format
Subject Add.Info
5
*********************
FTP Encrypted TX
[ Exit ]
9
Press the OK key.
10 Press the U or V key to select [On] or [Off].
11 Press the OK key.
Print Setting
You can set whether the machine should print received originals when forwarding them.
1
2
3
4
5
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
4-23
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
6
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Print].
Forward Settings: a b
6
7
Forward Time
File Name Entry
8 Print
*********************
[ Exit ]
9
Press the OK key.
10 Press the U or V key to select [On] or [Off].
11 Press the OK key.
File Name Registration
You can set the file name to be created when forwarding. You can append information such as the date/time
and the job number or fax number.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [FAX].
Press the OK key.
Press the U or V key to select [Reception].
Press the OK key.
Press the U or V key to select [Forward Settings].
Reception:
a b
3
4
Rings(TAD)
Rings(FAX/TEL)
5
*********************
Forward Settings
[ Exit ]
7
Press the OK key.
4-24
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
8
9
Press the U or V key to select [File Name Entry].
Forward Settings: a b
5
6
FTP Encrypted TX
Forward Time
7
*********************
File Name Entry
[ Exit ]
Press the OK key.
10 Use the numeric keys to enter the document name.
4
Up to 32 characters can be entered.
NOTE: For details on character entry, refer to
Please note that when you have not add any additional
information, file names become the same, and,
therefore, old files are overwritten when received
originals are forwarded with folder (SMB) transmission
and folder (FTP) transmission.
11 Press the OK key.
12 When Not Appending Information to Document
Name
1
2
3
Press the U or V key to select [None].
Press the OK key.
Press the U or V key to select [On] or [Off]
for appending of sender information.
When Appending Information to Document
Name
1
Press the U or V key to select [Date], [Job
No.], [Job No. + Date] or [Date + Job No.].
2
3
Press the OK key.
Press the U or V key to select [None],
[Add.Info.+Sender] or [Sender+Add.Info.] for
appending of sender information.
13 Press the OK key.
4-25
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Settings for Memory Forwarding from COMMAND CENTER (Forward)
You can use COMMAND CENTER on a computer connected to the network to specify the memory forwarding
settings on this machine.
Refer to the machine’s Operation Guide for information on the network settings.
Accessing COMMAND CENTER
1
2
Open the web browser.
In the Address or Location bar, enter the machine’s
IP address as the URL, e.g. http://192.168.48.21/.
The web page displays basic information about the
machine and COMMAND CENTER as well as the
current status of the machine.
3
4
Select a category from the navigation bar on the
left to view and set values for that particular
category.
If administrator privileges have been enabled on
COMMAND CENTER, remember to enter the
correct user name and password when trying to
access the relevant screens.
Setting Administrator Password restricts general
users' access to pages other than the Start page.
For security purposes, setting the Administrator
password is highly recommended. The default
Administrator password is factory-set as admin00.
4-26
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Forward Settings
FAX > Common > Forward > General
Specify the forward settings.
4
The settings available on the Forward page are shown below.
Item
Description
On
Off
All received faxes are forwarded.
Faxes are not forwarded.
Activating Time Setting Specifies whether a time is specified.
Activating Time
Registers times when the specified requirements are
enabled or disabled. You can register any time between
00:00 and 23:59.
File Name
Sets the name of the file created when a fax is forwarded.
Additional Information
Appends information such as the date/time, job number and
destination address to the file name.
Add Sender
Information
Sets the position appended in the additional information.
The additional information consists of the local FAX number.
4-27
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Item
Description
Print
To print the fax, click Print. The Print page is displayed.
Forward
To select the forwarding destination, click Forward. The
Forwarding page is displayed. (Refer to Forwarding Settings
After completing the settings, click Submit to save the settings.
Print Settings
FAX > Common > Forward > Print
Use this page to specify the print settings.
The settings available on the Print page are shown below.
Item
Description
Print
Specifies whether faxes forwarded to this machine are
printed.
After completing the settings, click Submit to save the settings.
4-28
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Forwarding Settings
FAX > Common > Forward > Forward
Use this page to select forwarding destinations.
4
The settings available on the Forward page are shown below.
Item
File Format
Description
Choose either PDF or TIFF as the file format used for storing
forwarded files.
FTP Encrypted TX
Turn On to enable encryption for transmission. Note the SSL
protocol must also be turned on.
Subject Additional
Information
When a forwarding address is specified as destination,
Sender Name or Sender FAX No./ Address is appended at
forwarding. When None, these will not be appended.
Page Separate
Choose whether pages are separated when faxes are
forwarded to a computer.
4-29
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Item
Description
Forward Destination
Settings
Displays the registered destinations. Click the checkboxes
for the destinations to be enabled so that they are ticked. To
change a destination, click the name of the destination to be
changed. The Forward - Edit page is displayed.
Change the destination information and click Submit.
Delete
To delete a destination, click the checkbox for the destination
to be deleted so that it is ticked and then click Delete.
After completing the settings, click Submit to save the settings.
Editing Destinations
FAX > Common > Forward > Forward > Edit
Use this page to edit destinations.
The settings available on the Forward - Edit page are shown below.
Item
Description
Select the destination type.
Address Type
•
•
•
•
E-mail
SMB
FTP
FAX
4-30
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
If you selected E-mail as the destination type, specify the settings below.
E-mail
•
If you selected SMB or FTP as the destination type, specify the settings below.
•
•
•
•
•
Host Name
Port number
Path
Login User Name
Login Password
4
If you selected FAX as the destination type, specify the settings below.
•
•
•
•
•
•
•
•
FAX Number
Transmit Start Speed
ECM
Sub Address
Password
Encryption Key No.
Encryption Box
Encryption Box No.
After completing the settings, click Submit to save the settings.
4-31
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Sub Address Communication
Sub Address Communication
Sub address communication is communication in which data is sent and received with sub addresses and
passwords attached in conformance with the ITU-T (International Telecommunication Union)
recommendations. Sub addresses enable communication modes with third-party machines that were
previously only possible between our brand machines. These include confidential delivery (sending originals to
an original delivery box set up in the receiving system) and polling communication (reception of documents from
a source machine that is controlled from the receiving machine). Using sub address communication on this
machine also allows advanced communication functions such as storing received originals in Sub Address
Boxes.
NOTE: In order to conduct sub address communication, the other party’s system also needs to be equipped
with sub address communication functions of the same type.
Sub address-based communication can be used together with various kind of functional communication. When
registering a sub address and sub address password in the Address Book and One-touch keys, you can omit
their entry before transmission. For details, refer to the explanations in the procedure of each communication
method and registration method.
Sub Address
With the machine, sub address and sub address passwords are called sub address.
Sub Address
Use the numbers from 0 to 9, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address of up to 20 digits. When
the machine receives originals, the sub address is used as the forward requirement for memory forwarding.
Sub Address Password
Use the numbers from 0 to 9, alphabets, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address password
of up to 20 digits. When the machine receives originals, a sub address password is not used.
Sub Address Transmission
To use sub address transmission, follow the steps below.
NOTE: To use sub address transmission, check that a sub address and password have been set in the
receiving system in advance.
For the setting method when the machine receives originals, refer to Sub Address Box Function on page 4-35.
1
2
Press the FAX key.
Place the originals.
4-32
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
NOTE: When a sub address has been registered to
the destination of the Address Book, you can use the
destination. When a sub address-registered
destination in the Address Book is used for a One-
touch key, you can also use the One-touch key. In this
case, go to step 10.
3
Use the numeric keys to enter the fax number of
the other party.
Fax No. Entry:
0123456789
A b
*
4
[ Chain ] [ Detail ]
4
5
Press [Detail] (the Right select key).
Press the Y or Z key to select [Sub Address], and
press [Edit] (the Right Select key).
FAX Detail:
Sub Address:
1234567890123
OOOOOOOOOO
C b
1/4
[ Edit ]
6
Enter the sub address using the numeric keys.
Sub Address:
C b
1234567890123
*
S
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’ characters to
enter a sub address.
7
Press the OK key and enter the sub address
password using the numeric keys.
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, alphabets, ‘ (space)’, ‘#’ and ‘*’
characters to enter a sub address password. When the
machine receives originals, a sub address password is
not used.
8
9
Press the OK key.
Press the OK key again.
NOTE: When On is selected in Entry Check for New
Destination, a confirmation screen is displayed for the
entered FAX number. Re-enter the same FAX number
4-33
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
and press the OK key. For details, refer to Destination
confirmation screen before transmission in the
Operation Guide for the machine.
10 Press the Start key. Transmission begins.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
4-34
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Sub Address Box Function
Sub Address Box
A Sub Address Box is a box for storing received originals on the machine to which the FAX System is to be
installed. Using sub address reception function, you can store received originals in a personal Sub Address Box.
Registering a Sub Address Box
Up to 20 Sub Address Boxes can be registered.
4
1
2
Press the System Menu/Counter key.
Press the U or V key to select [Document Box],
and press the OK key.
3
4
Press the U or V key to select [Sub Address Box],
and press the OK key.
Press the U or V key to select [Detail/Edit], and
press the OK key.
5
6
Press [Menu] (the Right Select key).
Press the U or V key to select [Add Box], and
press the OK key.
7
Use the numeric keys to enter the sub address.
NOTE: You can use up to 20 digits including the
numbers from 0 to 9, ‘ (space)’, ‘#’ and ‘*’ characters to
enter a sub address.
8
Press the OK key, and use the numeric keys to
enter the name of Sub Address Box.
NOTE: For details on character entry, refer to
9
Press the OK key, and use the numeric keys to
enter the box number of Sub Address Box.
10 Press the OK key.
11 Press the U or V key to select [Exit], and press the
OK key.
4-35
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Changing Sub Address Box
1
2
3
Follow steps 1 to 4 of Registering a Sub Address
Select the box to be changed, and press the OK
key.
Press the Y or Z key to move the item to be
changed, and press [Edit] or [Change] (the Right
Select key).
4
Use the numeric keys to edit the item.
Repeat the step 3 and 4 for the other items.
NOTE: When User Login authentication is enabled,
User setting menu and Permission menu appear.
Follow the steps to change the user name.
1
2
Press the U or V key to select [Local User],
[Network User] or [None].
When selecting [Local User], press the U or
V key to select user name form the Local
User List.
When selecting [Network User], use the
numeric keys to enter the login user name.
3
Press the OK key.
Follow the steps to change the permission of the
subaddress box.
1
2
Press the U or V key to select [Shared] or
[Private].
Press the OK key.
Follow the steps to change the setting of the
deletion after printing the originals.
1
2
Press the U or V key to select [On] or [Off] in
Del. afterPrint menu.
Press the OK key.
Deleting Sub Address Box
1
2
Follow steps 1 to 4 of Registering a Sub Address
Select the box to be deleted.
4-36
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
3
4
5
Press [Menu] (the Right Select key).
Press the U or V key to select [Delete].
When the deletion confirmation screen appears,
press [Yes] (the Left Select key).
Printing Originals from a Sub Address Box
To print the originals that have been sent to a Sub Address Box, use the following operation.
1
2
Press the Document Box key.
4
Press the U or V key to select [Sub Address Box],
and press the OK key.
3
Press the U or V key to select the Sub Address
Box.
4
5
Press [Menu] (the Right Select key).
Press the U or V key to select [Open], and press
the OK key.
NOTE: You must enter a box password in the
following situations:
•
•
If user login is disabled
If user login is enabled but the Sub Address Box
has been selected by another user when you login
with user privileges
6
7
Press the U or V key to select the document from
the list, press [Menu] (the Right Select key). The
selected original is indicated by a checkmark. To
cancel the selection, press [Select] (the Right
Select key) again.
Selecting Two or More Originals
Repeat steps 4 to 6.
Selecting/Cancelling All Originals
1
2
Press [Menu] (the Left Select key).
Press the U or V key to select [Select All] or
[Clear All].
3
Press the OK key.
Selecting the Originals
1
2
Press [Menu] (the Left Select key).
Press the U or V key to select [Search].
4-37
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
3
4
Press the OK key.
Use the numeric keys to enter the desired
original for which you want to search.
NOTE: For details on character entry, refer to
5
Select the document from the list. To select
the document, follow the step 6.
NOTE: From a Sub Address Box, only printing is
available. Sending cannot be done.
8
9
Press the OK key.
Press the U or V key to select [Print].The print
starts.
Deleting Originals after Printing from a Sub Address Box
To automatically delete the originals printed form the Sub Address Box, use the following operation.
1
2
3
Press the OK key.
Press the U or V key to select the document from
the list, press [Select] (the Right Select key). The
selected original is indicated by a checkmark.
4
5
6
7
8
9
Press the OK key.
Press the U or V key to select [Print] .
Press the OK key.
Press the Function Menu key.
Press the U or V key to select [Del. afterPrint] .
Press the OK key.
10 Press the U or V key to select [On].
11 Press the OK key.
12 Press the Start key. The original is deleted after
printing.
4-38
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Deleting Originals from a Sub Address Box
Use the procedure below to delete an original that you have forwarded to a Sub Address Box.
1
2
3
Press the U or V key to select [Delete], and press
the OK key.
When the deletion confirmation screen appears,
press [Yes] (the Left Select key). The original is
deleted.
4
Checking Details and Renaming Files
You can use the procedure below to check the details of documents forwarded to a Sub Address Box. You can
also use this procedure to rename files.
1
2
3
4
Press the U or V key to select the document,
press [Menu] (the Left Select key).
Press the U or V key to select [Detail/Edit], and
press the OK key.
Press the Y or Z key to move the item to be
changed, and press [Edit] (the Right Select key).
The details for the selected original are displayed.
Item
Description
File Name
File name of the original
Press [Edit] to rename the file.
Number of Pages Number of pages in the original
Resolution
Resolution of the original
Date and Time
The date and time the original was forwarded.
5
Use the numeric keys to edit the item.
Repeat the step 4 and 5 for the other items.
4-39
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Printing a Sub Address Box List
You can print the Sub Address Box list in which the list of Box No.’s and Box names of the registered Sub
Address Boxes are described. When there are originals in the Sub Address Boxes, the number of pages is
displayed.
NOTE: The list can be printed when user login has been enabled and the machine is logged in with
administrator privileges.
1
2
Press the System Menu/Counter key.
Press the U or V key to select [Document Box],
and press the OK key.
3
4
5
Press the U or V key to select [Sub Address Box],
and press the OK key.
Press the U or V key to select [SubAddr Box List],
and press the OK key.
When the printing confirmation screen appears,
press [Yes](the Left Select key). The machine
prints a list of the Sub Address Boxes.
FS-C2126MFP
4-40
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Program Dial
You can register transmission requirements such as the other party to which you send originals and
transmission time as a program. After registration, you can recall transmission requirements only by pressing
the program number. Also, you can assign names to programs to make recalling programs easier and more
convenient.
NOTE: The copy function can be also registered to the program. Up to 4 programs including copying and
sending functions can be registered.
When user login has been enabled, only the administrator can register.
4
Registering Programs
1
With transmission requirements to be registered
are set, press the Program key and hold it (2
seconds). The program is registered to the key.
When you press a number where a program is
already registered, proceed to the next step.
2
3
4
Press the U or V key to select [Overwrite].
Press the OK key.
Press [Yes] (the Left Select key). The program is
registered, overwriting the previous one.
Deleting Registration Contents
1
Press the Program key where a program you want
to delete is registered, and hold it (2 seconds).
2
3
4
Press the U or V key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). The program is
deleted.
Using Program Dial
1
2
Press the Program key.
Place the originals.
NOTE: You can also use the program you have called
up to change transmission requirements such as
changing the other party.
3
Press the Start key. Transmission begins.
4-41
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
4-42
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Polling Communication
Polling communication is a communication mode in which the transmission of originals on the sending machine
is controlled by the receiving machine. This allows the receiving machine to tailor the reception of originals to
its own circumstances. This machine supports both polling transmission and polling reception.
IMPORTANT: Because the receiving machine dials the sending machine in polling communication, call
charges are normally borne by the recipient.
4
Polling Transmission
Originals to be used in polling transmissions should be stored in a Polling box. When a polling request is
received from the destination, the stored originals are sent automatically.
Once originals intended for polling transmission have been sent to the destination, they are automatically
deleted. However, if you set Delete TX File to [Off], the originals are stored in the Polling box until you delete
them. You can use polling transmission with the same originals as many times as you wish. (Refer to page 4-43.)
NOTE: You can store up to 10 originals for polling transmission.
You can also add to or overwrite originals up until a polling request arrives from the destination. Refer to
Deleting Originals After Polling Transmission
Originals intended for polling transmission are automatically deleted after they have been sent to the
destination. To allow polling transmission of the same original to multiple destinations, set this option to [Off].
1
2
3
4
5
6
7
8
9
Press the System Menu/Counter key.
Press the U or V key to select [Document Box].
Press the OK key.
Press the U or V key to select [Polling Box].
Press the OK key.
Press the U or V key to select [Delete TX File].
Press the OK key.
Press the U or V key to select [On] or [Off].
Press the OK key.
Overwrite Setting
Use the procedure below to overwrite the existing document if the same name is added to the new file.
To allow overwriting, set this option to [Allowed].
1
2
Press the System Menu/Counter key.
Press the U or V key to select [Document Box].
4-43
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
3
4
5
6
7
8
Press the OK key.
Press the U or V key to select [Polling Box].
Press the OK key.
Press the U or V key to select [OverwriteSetting].
Press the OK key.
Press the U or V key to select [Allowed] or [Not
Allowed].
9
Press the OK key.
Using Polling Transmission
1
2
3
4
5
6
7
8
Press the Document Box key.
Place the originals.
Press the U or V key to select [Polling Box].
Press the OK key.
Press the U or V key to select [Store File].
Press the OK key.
Press the Function Menu key.
Change the required functions for the original to be
stored. For information on using the functions,
refer to the machine’s Operation Guide.
Function
Description
Original Size
Select the size of originals to be scanned. Be sure to select
the original’s size when using custom size originals.
Original Image
Scan Resolution
Orig. Orientation
Select image quality.
Chooses the level of detail used for scanning originals.
To ensure that the originals are stored in the correct orientation,
this indicates which end of the original is the top. To use the
following functions, select the orientation of the originals.
•
•
1-sided / 2-sided Selection
Border Erase
Continuous Scan
Allows you to divide originals that cannot be placed in the
document processor at one time into multiple scans and then
store the result as a single file. With this function, originals
continue to be scanned until you press [END Scan] (the
Right Select key).
4-44
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Function
Description
File Name Entry
Allows you to rename the files created from scanned originals.
You can also use this function to add the job number and/or date.
Job Finish Notice
Density
Sends a notice by an e-mail when a transmission is complete.
Adjusts the density used for scanning originals.
Select the type and binding of originals.
Duplex
4
9
Press the Start key. The originals are scanned and
stored in the Polling box.
4-45
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Polling Reception
This function automatically triggers transmission of originals stored on the sending machine when the receiving
machine dials the sending machine’s number. If multiple contacts are specified, they are dialed in sequence and
originals are received from each contact.
NOTE: By setting a group as the destination, you can receive originals from up to 100 contacts in a single
operation. If you specified a destination for which encrypted communication is registered, encrypted
communication is disabled for polling reception.
To use polling reception, you must first ensure that the sending machine is set up for polling transmission. (Refer
Using sub addresses at the same time allows the communication modes described below.
Sub Address Bulletin Board Reception
†
If the recipient’s machine has a sub address bulletin board function, you can use sub addresses to
communicate with that machine even if it is a third-party machine.
Sub Address:
3333
External FAX
IMPORTANT:
•
The recipient’s machine must also be equipped with a sub address bulletin board function. Some fax machines
cannot store originals and some do not support polling transmission. Check both the sending and receiving
machines beforehand to ensure that they each have the required functionality.
•
Ask the recipient for the sub address and password that are registered in the recipient’s machine.
For information on how to receive files using sub address bulletin board communication, refer to Using Polling
†.
On this machine, the sub address and sub address password.
4-46
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Using Polling Reception
NOTE: When the other party is using sub addresses, refer to Using Polling Reception with Sub Addresses
below.
1
2
3
4
5
6
7
Press the FAX key.
Press the Function Menu key.
Press the U or V key to select [FAX RX Polling].
Press the OK key.
4
Press the U or V key to select [On].
Press the OK key.
Select the destination.
NOTE: Only fax numbers can be selected as
destinations.
You can select destinations using a combination of
numeric keys input and Address Book or One-touch
keys selection.
When On is selected in Entry Check for New
Destination, a confirmation screen is displayed for the
entered FAX number. Re-enter the same FAX number
and press the OK key. For details, refer to Destination
confirmation screen before transmission in the
Operation Guide for the machine.
8
Press the Start key. The operations for reception
begin.
NOTE: When On is selected in Destination Check before Send, a destination confirmation screen is displayed
when you press the Start key. For details, refer to Confirmation Screen of Destinations on page 5-13.
4-47
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at
the sending machine. This communication is still possible when the other party is using a third-party machine
provided it is equipped with the same type of sub address communication function.
IMPORTANT: Check the sub address set by the sender beforehand.
1
2
Press the FAX key.
Select the destination. Here, refer to Sub Address
Transmission on page 4-32 when entering the sub
address.
NOTE: Only fax numbers can be selected as
destinations.
You can select destinations using a combination of
numeric keys input, One-touch keys selection and
selection from the Address Book containing registered
sub addresses.
When On is selected in Entry Check for New
Destination, a confirmation screen is displayed for the
entered FAX number. Re-enter the same FAX number
and press the OK key. For details, refer to Destination
confirmation screen before transmission in the
Operation Guide for the machine.
3
Press the Start key. The operations for reception
begin.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Printing from a Polling Box
Use this procedure to print an original stored in a Polling box.
1
2
3
4
Press the Document Box key.
Press the U or V key to select [Polling Box].
Press the OK key.
Press the U or V key to select the desired original.
Polling Box:
Store File
maury’s data
a b
N
o
T
*********************
Common
[ Menu ] [ Select ]
o
T
4-48
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
5
6
Press [Select] (the Right Select key). The
selected original is indicated by a checkmark. To
cancel the selection, press [Select] (the Right
Select key) again.
Selecting Two or More Originals
Repeat steps 4 to 5.
Selecting/Cancelling All Originals
1
2
Press [Menu] (the Left Select key).
4
Press the U or V key to select [Select All] or
[Clear All].
3
Press the OK key.
Selecting the Originals
1
2
3
4
Press [Menu] (the Left Select key).
Press the U or V key to select [Search].
Press the OK key.
Use the numeric keys to enter the desired
original for which you want to search.
NOTE: For details on character entry, refer to
5
Select the document from the list. To select
the document, follow the step 5.
7
8
9
Press the OK key.
Press the U or V key to select [Print].
Press the OK key.
10 Press the Start key. Printing starts.
Deleting Originals in a Polling Box
Use this procedure to delete an original stored in a Polling box.
NOTE: If Delete TX File is set to [On], originals are automatically deleted following polling transmission.
1
Follow steps 1 to 5 in Printing from a Polling Box
2
3
4
5
Press the OK key.
Press the U or V key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). The original is
deleted.
4-49
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Checking Details and Renaming Files
Use this procedure to check the details of an original stored in a Polling box. You can also use this procedure
to rename files.
1
Follow steps 1 to 4 in Printing from a Polling Box
2
3
4
Press [Menu] (the Left Select key).
Press the U or V key to select [Detail/Edit].
Use the Y or Z key to check the details of the
selected original.
Item
File Name
Description
File name of the original
Press [Edit] (the Right Select key) to rename
the file.
Page
Number of pages in the original
Resolution
Date and Time
Resolution used during scanning
The date/time when the original was stored.
5
When you have finished checking the details,
press the OK key.
4-50
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Account Management
Account management is user management that specifies the users who can use the machine and job
accounting that controls the usage per account. In user accounting, up to 21 users can be managed using Login
User Name and Login Password. In job accounting, the status of fax use per account can be known for up to
20 accounts for sending of originals and making communication reservation after entering Account ID. For each
management method, refer to the machine’s Operation Guide.
Description of User Accounting
4
Item
Description
Registration of
User
Register user access privileges, Login User
Name and Login Password.
Enable/Disable
User accounting
Enable User accounting.
NOTE: For details, refer to the machine’s Operation Guide.
Description of Job Accounting
Item
Description
Registration of
Account
Register Account Name and Account ID. Up to
8 digits can be entered.
Enable/Disable job Enable job accounting.
accounting
FAX send
restriction
Restricts the number of fax sheets that can be
sent. You can prohibit the use of this sending
function or cancel the sending restriction.
Counting of the
number of used
sheets
You can reset the counting, referring to the
number of fax sheets to be sent and the time
required for sending fax by all the accounts or by
account.
Print of Accounting You can print the printed and sent page numbers
Report that have been counted by all the accounts.
NOTE: For details, refer to the machine’s Operation Guide.
4-51
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Communication modes subject to job accounting
•
•
•
•
•
•
•
•
•
Normal transmission
Delayed transmission
Broadcast transmission
Sub address transmission
Encrypted transmission
Manual send when dialed from this machine to the receiving system
Polling reception
Network FAX transmission
Transmission from the document box
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID when performing the following
operations.
•
•
•
•
•
•
•
•
•
•
Normal transmission
Delayed transmission
Broadcast transmission
Sub address transmission
Output from Sub Address Box
Encrypted transmission
Manual send when dialed from this machine to the receiving system
Polling transmission
Network FAX transmission
Transmission from the document box
IMPORTANT: You can use ‘Make a call’, ‘Checking FAX Job History’ and ‘Communication Control Report
Output’ functions without entering an Account ID or Administrator No.
When job accounting has been enabled, batch transmission function works only for communication to be
performed for the same Account ID. The communication to be performed with a different Account ID is not
conducted as a batch transmission.
Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting has been enabled, and you send originals after entering an Account ID, the Account Name is
printed.
4-52
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Logging in when User Accounting has been Enabled
When user accounting has been enabled, you need to enter a Login User Name and Login Password to use
the machine.
1
If the screen below appears during the operations,
perform the following login operations.
Login User Name: L b
*******************
Login Password:
[ Login ]
4
2
3
4
Press the U or V key to select [Login User Name].
Press the OK key.
Use the numeric keys to enter the login user name.
NOTE: For details on character entry, refer to
5
6
7
8
Press the OK key.
Press the U or V key to select [Login Password].
Press the OK key.
Use the numeric keys to enter the login password.
NOTE: For details on character entry, refer to
9
Press the OK key.
10 Check the login user name and password are
correct, and press [Login] (the Right Select key).
11 Perform the fax operation.
NOTE: When the operation is completed, press the
Logout key.
4-53
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Logging in when Job Accounting has been Enabled
When job accounting has been enabled, you need to enter an Account ID when using the machine.
NOTE: When both user accounting and job accounting have been enabled, the screen for entering a Login
User Name and Login Password is displayed.
1
Use the numeric keys to enter Account ID, and
press the OK key.
Account ID:
b
*******************
NOTE: You can check the number of pages used by a
department by entering the Account ID and pressing
[Counter] (the Left Select key).
[Counter ]
2
Perform the fax operation.
NOTE: When the operation is completed, press the
Logout key.
4-54
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Other Convenient Functions
Functions that are convenient when sending fax are introduced here. For usage of each function, refer to the
machine’s Operation Guide.
Original Size Selection
Select the size of originals to be scanned. Be sure to select the original’s size when using custom size originals.
1-sided / 2-sided Selection
4
Select the type and binding of originals.
Original
Type
Binding
Orientation
1-sided sheet original 1-
–
–
sided
2-sided sheet original 2-
sided
BindingLeft/Right, Top Edge Top,
Biding Top Top Edge Left
NOTE: For direct transmission, you cannot use Mixed Sized Originals. (Refer to Selection of Transmission
Original Orientation
To ensure that the originals are sent in the correct orientation for reading, indicate which end of the original is
the top. To use the following functions, select the orientation of the originals.
•
1-sided / 2-sided Selection
Selection of Original Image
Select Original Image.
Item
Detail
Text +
Photo
Suitable for originals containing a mixture of text and
photos.
Text
Sharply renders pencil text and fine lines.
For enhanced copies of photographs.
Photo
†
for OCR
Image quality suitable for OCR software (Applications
converting images into text data)
†.
When you send fax, this is changed to [Text].
4-55
Download from Www.Somanuals.com. All Manuals Search And Download.
FAX Operation (Advanced)
Continuous Scan
When you cannot place multi-page originals into the document processor at one time, the multi-page originals
can be scanned in batches and sent as one job. In this method, originals are scanned until you press [END
Scan] (the Right Select key).
Job Finish Notice
This function is used to inform when the transmission of e-mail is completed.
4-56
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Checking Transmission Results and
Registration Status
This chapter explains how to check fax transmission results and functional registration status.
• Checking FAX Job History........................................................................................... 5-3
• Printing Administrative Reports ................................................................................... 5-5
• Reporting FAX Receipt Result by E-mail....................................................................5-11
• Confirmation Screen of Destinations......................................................................... 5-13
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Various Tools for Checking Transmission Results and Registration
Status
Check the fax transmission results and registration status using the following tools.
Display
Location
Contents to
Check
Reference
Page
Tool
FAX job
Timing of Check
Display
History of latest
16 send and
receipt results
stored
Any time
history check
Send result
report /
Receiptresult
report
Report
printing
Latest send or
receipt result
Automatic printout
or receiving
operation (No Print
Output or Error
Only is also
optionally
available.)
Activity report Report
printing
Latest 50 send or Any time, and
receipt results
automatic printout
after every 50
sending/receiving
Status page
Report
printing
Registration
status of Local
FAX Number,
Local FAX Name,
fax line setting,
etc.
Any time
Reporting of
FAX receipt
result by E-
mail
PC
Fax receipt
Fax reception is
reported by e-mail.
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Checking FAX Job History
Display the history of the latest 16 each of send and receipt results on the display for checking.
NOTE: Even when job accounting is enabled, 16 each of send and receipt results are displayed regardless of
the account ID.
For details of the job history check, refer to the machine’s Operation Guide.
Displaying Job Log Screen
1
2
Press the Status/Job Cancel key.
5
Press the U or V key to select [Print Job Log] to
check reception results, [Send Job Log] to check
transmission results, or [Store Job Log] to check
results of storage in Sub Address Boxes, Polling
Boxes and USB memory.
3
4
Press the OK key.
Press the U or V key to select the job you want to
check.
Print Job Status: a b
0008 Copy
r
*********************
s
0009
0010
r
maury’s data
aaaa
n
[ Pause ] [ Menu ]
5
6
Press the OK key.
Press the Y or Z key to check the details of the
job.
7
Press the OK key.
Description of Detailed Information Screen
Item
Description
Result
Result is indicated.
OK: Job ended properly.
Cancel: Job was canceled.
Error: Job ended improperly due to error.
Accepted Time
End Time
Time when job was accepted
Time when job ended
Job name
Job Name
Job Type
Job type
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Item
Description
User Name
User name
Blank if no information is available
Number of pages in the printing page and copies
Number of pages in the original
Page and Copy
Original Pages
Color/B & W
Sender Info.
Destination
Color mode used during scanning
Transmission information
Recipient
The number of destinations is displayed.
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Printing Administrative Reports
You can print various administrative reports to check the results of fax transmission or the status of the functional
setup.
Part that is operated
5
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also
print the transmitted image in the send result report.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Result Rpt Set.].
Press the OK key.
Press the U or V key to select [Send Result].
Result Rpt Set.: a b
Send Result
1
*********************
2
3
FAX RX Result
JobFinish Notice
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [FAX].
Send Result:
E-mail/Folder
FAX
a b
1
2
*********************
3
CancelBeforeSend
[ Exit ]
9
Press the OK key.
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
10 Press the U or V key to select [Off] (not to print),
FAX:
a b
*********************
[On] (to print) or [Error Only].
1
*Off
2
3
On
Error Only
11 Press the OK key. Proceed to the next step if you
selected [Error Only] or [On] in step 10.
12 Press the U or V key to select [On] or [Off] for
attachment of the transmitted image.
With transmitted image
Without transmitted image
Send Result Report
Completed
Send Result Report
Completed
FAX RX Result Reports
Each time you receive a fax, you can print a report to confirm whether the fax was received successfully.
NOTE: Fax receipt can also be notified by e-mail instead of checking the receipt result report. (Refer to
1
2
3
4
5
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Result Rpt Set.].
Press the OK key.
5-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
6
Press the U or V key to select [FAX RX Result].
Result Rpt Set.: a b
Send Result
FAX RX Result
1
2
*********************
3
JobFinish Notice
[ Exit ]
7
8
Press the OK key.
Press the U or V key to select [Off] (not to print),
[On] (to print) or [Error/SubAddress].
FAX RX Result:
a b
*********************
1
*Off
2
3
On
5
Error/SubAddress
9
Press the OK key.
FAX RX Result Report
Completed
Report for Job Canceled before Sending
Print a send result report when the job is canceled before being sent.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Result Rpt Set.].
Press the OK key.
Press the U or V key to select [Send Result].
Result Rpt Set.: a b
Send Result
1
*********************
2
3
FAX RX Result
JobFinish Notice
[ Exit ]
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
7
8
Press the OK key.
Press the U or V key to select
[CancelBeforeSend].
Send Result:
a b
1
2
E-mail/Folder
FAX
9
Press the OK key.
3
*********************
CancelBeforeSend
[ Exit ]
10 Press the U or V key to select [Off] (not to print)
CancelBeforeSend: a b
or [On] (to print).
1
*********************
*Off
2
On
11 Press the OK key.
Activity Report
Activity reports are reports of both the sent faxes and the received faxes. Each report lists the history of the
latest 50 sent or received fax data. When automatic printout is selected, a report is printed out automatically
after every 50 faxes sent or received.
Printing Activity Reports
The latest 50 sent or received fax data are printed as a report.
1
2
3
4
5
Press the Status/Job Cancel key.
Press the U or V key to select [FAX].
Press the OK key.
Press [Log] (the Right Select key).
Press the U or V key to select [Outgoing FAX Rpt]
to print the sent fax report, or [Incoming FAX Rpt]
to print the received fax report.
Log:
1
2
a b
Outgoing FAX Log
Incoming FAX Log
Outgoing FAX Rpt
3
*********************
6
Press [Yes] (the Left Select key). The report is
printed.
5-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
FAX TX Report
FAX RX Report
5
Automatic Printout
An activity report is printed out automatically after every 50 faxes sent or received.
1
2
3
4
5
6
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Admin Rpt Set.].
Press the OK key.
Press the U or V key to select [Outgoing FAX Rpt]
or [Incoming FAX Rpt].
7
8
Press the OK key.
Press the U or V key to select [Off] (not to print)
or [On] (to print).
9
Press the OK key.
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Status Page
A status page provides information on a number of user setups.
FAX-related information includes the Local FAX Number, Local FAX Name, fax line setting, etc. You can print it
out as necessary.
1
2
3
4
5
6
7
8
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Report Print].
Press the OK key.
Press the U or V key to select [Status Page].
Press the OK key.
Press [Yes] (the Left Select key). The status page
is printed.
Status Page
5-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Reporting FAX Receipt Result by E-mail
Fax receipt can also be notified by e-mail instead of
checking the receipt result report.
NOTE: This setting is displayed when the FAX RX
Result Report setting is [On] or [Error/SubAddress].
For details, refer to FAX RX Result Reports on page 5-
6.
Fax receipt results are reported by e-mail according to
the settings of FAX RX Result Report. If the FAX RX
Result Report setting is [On], E-mail notification is
provided for every fax. If the setting is [Error/
SubAddress], E-mail notification is only provided when
an error occurs or the received original is forwarded to
Sub Address Boxes.
5
1
2
3
4
5
6
7
8
9
Press the System Menu/Counter key.
Press the U or V key to select [Report].
Press the OK key.
Press the U or V key to select [Result Rpt Set.].
Press the OK key.
Press the U or V key to select [FAX RX Result].
Press the OK key.
Press the U or V key to select [On].
Press the OK key.
10 Press the U or V key to select [E-mail].
11 Press the OK key.
12 Selecting Destination from Address Book
1
Press the U or V key to select [Address
Book].
2
3
Press the OK key.
Press the U or V key to select the destination
you want to register as the report destination.
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Entering Destination Directly
1
Press the U or V key to select [Address
Entry].
2
3
Press the OK key.
Use the numeric keys to enter the address
you want to register as the report destination.
Up to 128 digits can be entered.
NOTE: For details on character entry, refer to
13 Press the OK key.
5-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
Confirmation Screen of Destinations
When selecting On for Destination Check before Send, the confirmation screen of destinations appears after
pressing the Start key. For details, refer to Destination confirmation screen before transmission in the Operation
Guide for the machine.
Follow the steps below to confirm the destinations.
1
Press the U or V key to confirm every destination.
Destination List: a b
To confirm a destination, select the destination and
press the OK key, and then select [Detail] and
press the OK key.
p
b
G
Morgan@abc.co.jp
0123456789
0676543210
[ Cancel ] [ Next ]
To delete a destination, select the destination you
want to delete and press the OK key, and then
select [Delete] and press the OK key. Press [Yes]
(the Left select key) in the confirmation screen.
The destination is deleted.
5
2
3
Press [Next] (the Right Select key).
Press the Start key to start sending.
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Transmission Results and Registration Status
5-14
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Setup and Registration
This chapter explains how to perform various setups and registrations.
• FAX/TEL Auto Switch Reception................................................................................. 6-2
• FAX/Answering Machine Auto Switch Reception ........................................................ 6-4
• FAX Country Code....................................................................................................... 6-6
• Prohibiting FAX Printing at Specified Times (Unusable Time)................................... 6-10
• Receiving Mode......................................................................................................... 6-17
• Reception Date/Time................................................................................................. 6-18
• Remote Diagnostics .................................................................................................. 6-39
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
FAX/TEL Auto Switch Reception
This reception method is convenient when using both telephone and fax on a single telephone line. When fax
originals have been sent, the machine automatically receives them, and when the other party is calling from a
telephone, the machine makes a ringing tone urging the user to respond.
IMPORTANT:
•
In order to use FAX/TEL Auto Switch Reception, it is necessary to connect a telephone set (commercially
available product) to the machine.
•
After the telephone has made a ringing tone for the preset number of times, the other party is required to
pay phone line charges even if the receiving system does not respond.
Flow of reception
FAX
FAX
Telephone
When the other party has
sent originals with
automatic send
When the other party has
sent originals with manual
send
When the other party is
calling from a telephone
Receives incoming call without making ringing tone.
(The other party is required to pay the phone line charge from this point.)
Makes ringing tone twice.
(Only the other party can hear the ringing tone.)
Receive originals from the
Makes ringing tone. (Both the other party and the
receiving machine can hear the ringing tone.)
other party automatically
(FAX Automatic
Reception)
When you lift the handset of the connected telephone
set, you can talk to the other party.
After the end of the
conversation, you can
receive the fax.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
1
The connected telephone set makes a ringing
tone. Note that if [0] (zero) is set as the number of
rings (for FAX/TEL Auto Switch), the connected
telephone does not ring.
NOTE: You can change the number of times the
2
When the call is from a telephone
1
The machine makes a ringing tone urging the
user to respond. Lift the handset of the
telephone within 30 seconds.
6
NOTE: If you do not lift the handset within 30
seconds, the machine switches to fax reception.
2
Talk to the other party.
NOTE: At the end of the conversation, you can
manually receive the originals. (Refer to Manual
When the call is from a fax
The machine starts receiving fax originals.
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
FAX/Answering Machine Auto Switch Reception
This method is convenient when using both the answering machine and fax. When fax originals have been sent,
the machine receives them automatically, and when the call is from a telephone, the machine follows the
functions of the connected answering machine. Therefore, when the user is absent, the other party can leave
a message on the answering machine.
IMPORTANT: When using FAX/Answering Machine Auto Switch Reception function, if a silence continues for
at least 30 seconds before one minute passes after the machine has received a call from the other party, the
machine’s silence detection function comes into operation and the machine switches to fax reception.
NOTE: In order to use FAX/Answering Machine Auto Switch Reception, it is necessary to connect an
answering machine-equipped telephone set (commercially available product) to the machine.
For details, such as responding to messages, refer to the Operation Guide of each answering machine.
Set the number of rings to be made by the machine more than the number of rings to be made by the answering
Flow of reception
FAX
FAX
Telephone
When the other party has
sent originals with
automatic send
When the other party has
sent originals with manual
send
When the other party is
calling from a telephone
Receive fax originals from
the other party
The answering machine plays the message informing
the other party that the user is absent.
automatically (FAX
Automatic Reception).
The answering machine records a message from the
other party.
When the other party starts
sending originals, the
machine receives the
originals being sent.
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
1
The connected telephone set makes ringing tone
the set number of times.
NOTE: If you lift the handset while the telephone set
is still making the ringing tone, the machine enters a
2
The answering machine responds.
When the call is from a telephone, but the user
is absent
The answering machine plays a response
message, and starts recording the other party’s
message.
6
NOTE: When silence continues for at least 30
seconds during recording, the machine switches to fax
reception.
When the call is from a fax
The machine starts receiving fax originals.
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Basic Operation Procedure
To configure settings, follow the procedure below to move to each setting screen from the operation panel.
Part that is operated
6
To set Volume Adjustment (page 6-9), Unusable Time (page 6-10), or the cassette for printing received faxes
1
Press the System Menu/Counter key.
If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
2
Press the U or V key to select [Common
Settings].
3
4
Press the OK key.
Move to the screen where you want to configure a
setting. (Follow the procedure in the explanation of
the setting.)
1
Press the System Menu/Counter key.
If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
2
3
4
Press the U or V key to select [Adjust/Maint.].
Press the OK key.
Move to the screen where you want to configure a
setting. (Follow the procedure in the explanation of
the setting.)
Other Settings
1
Press the System Menu/Counter key.
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
2
3
4
Press the U or V key to select [Fax].
Press the OK key.
Press the
U
or
V
key to select [Transmission],
[Reception], [TX/RX Restrict.] or [TX/RX Common].
Configuring settings from [Transmission]
Configuring settings from [Reception]
• Procedure for receiving an encrypted
Configuring settings from [TX/RX Restrict.]
- Registering, changing, and deleting Permit fax
- Registering, changing, and deleting Reject fax
- Registering, changing, and deleting Permit ID
- Checking and deleting the registered contents
Configuring settings from [TX/RX Common]
• Setting an encryption key for encrypted
5
6
Press the OK key.
Move to the screen where you want to configure a
setting. (Follow the procedure in the explanation of
the setting.)
6-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Volume Adjustment
Adjust the volume of the speaker and monitor.
Speaker Volume: Volume of the built-in speaker when the line is connected by pressing the On Hook key.
Monitor Volume: Volume of the built-in speaker when the line is connected without pressing the On Hook key
such as in memory transmission.
Part that is operated
6
1
2
Press the U or V key to select [Sound].
Common Settings: a b
1
2
Language
Default Screen
3 Sound
*********************
[ Exit ]
3
4
Press the OK key.
Press the U or V key to select [FAX Speaker] or
[FAX Monitor].
Sound:
Buzzer
** **
FAX Monitor
[ Exit ]
a b
1
*
F
*
A
*
X
Speaker
**************
3
5
6
Press the OK key.
Press the U or V key to select the desired volume
of the speaker.
FAX Speaker:
a b
*********************
1
0 Mute
2
3
1 Minimum
*2 Medium
7
Press the OK key.
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Prohibiting FAX Printing at Specified Times (Unusable Time)
This feature sets a time period during which the machine will not print received faxes.
Faxes received during this Unusable Time are printed when the setting is unlocked.
IMPORTANT: When Unusable Time is set, in addition to FAX printing, all other operations are all prohibited
during the unusable time period, including printing of copy jobs, printer jobs and received e-mails, printing and
sending from USB Memory and Network FAX transmission.
1
2
3
Press the U or V key to select [Timer Setting].
Press the OK key.
If user management or account management is
enabled, the login screen will appear. For the login
procedure, refer to Account Management on
4
5
6
7
8
9
Press the U or V key to select [Unusable Time].
Press the OK key.
Press the U or V key to select [On].
Press the OK key.
Press the U or V key to enter the start time.
Press the OK key.
10 Press the U or V key to enter the end time.
11 Press the OK key.
NOTE: If the same time is set as the start time and
end time, you cannot use all day.
12 Specify the code to temporarily cancel the
unusable setting during unusable time.
Set a four digit [Unlock Code] using the numeric
keys.
NOTE: To use the machine temporarily during
unusable time, press [Code] (the Right Select key) in
the Unusable Time message screen. Then, enter the
Unlock code using the numeric keys and press [Login]
(the Right Select key).
13 Press the OK key.
6-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
DRD Reception
This reception mode utilizes the Distinctive Ring Pattern service available through some telephone companies.
With this service, you can use two or more fax numbers on a single telephone line. Thus, you can use this fax
and a telephone on the same line, and you can still designate a different fax number for each of them. As each
number is given a different ring pattern, the machine is able to differentiate between incoming calls. If one of
these numbers is designated for the machine, and a desired ring pattern is designated for that number in
advance, fax reception will be initiated automatically whenever the machine detects the ring pattern distinctive
to the fax.
NOTE: Using DRD Reception to receive a telephone call is only possible if a separately purchased telephone
is connected to the machine. DRD reception is only possible if you subscribe to the Distinctive Ring Pattern
service provided by your telephone company. Contact your telephone company for further information on the
Distinctive Ring Pattern service available.
Flow of reception
6
FAX
Telephone
If the other party has
dialed your fax number...
If the other party has
dialed your telephone
number...
Telephone company
The fax machine will ring
using the predetermined
ring pattern for a fax and
fax reception will start
The fax machine will ring
using the predetermined
ring pattern for a telephone
call. Conversation is
automatically. (The fax will possible with the other
handle the call using the
Automatic FAX Reception
mode.)
party if you answer the
telephone that is
connected to this fax
machine.
1
When a call comes in, the telephone will ring.
NOTE: If you lift the handset while the telephone is
still ringing, the machine will deal with the call in the
same manner as standard Manual FAX Reception. For
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
2
The machine will then ring using the
predetermined ring pattern.
When the call is from a telephone
Lift the handset and speak with the other party.
When the conversation is over, fax reception can
be initiated manually.
When the call is from a fax
Once the ringing tone stops, fax reception will start
automatically.
6-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Retry Times
The number of retry times can be changed automatically.
NOTE: Retry times can be set to between 0 and 14.
1
2
3
4
Press the U or V key to select [Retry Times].
Press the OK key.
Use the numeric keys to enter the number of retry
times.
6
5
Press the OK key.
6-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Media Type for Print Output
Specify the paper type to be used for print output of the received fax.
Part that is operated
1
2
Press the U or V key to select [FAX Media Type].
Reception:
a b
*********************
1
FAX Media Type
2
3
Rings(Normal)
Rings(TAD)
[ Exit ]
3
4
Press the OK key.
Press the U or V key to select the desired paper
type. If you do not specify any paper type, select
[All Media Type].
FAX Media Type:
a b
*********************
1
*All Media Type
2
3
Plain
Rough
5
Press the OK key.
Setting the cassette for the print output of received faxes
By specifying the media type, faxes can be received on the corresponding cassette.
1
2
3
4
Press the U or V key to select [Orig./Paper Set.].
Press the OK key.
Press the U or V key to select [Cassette 1 Set.],
[Cassette 2 Set.] or [Cassette 3 Set.].
6-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
NOTE: [Cassette 2 Set.] and [Cassette 3 Set.] are
shown when the optional paper feeder is installed.
5
6
Press the OK key.
Press the U or V key to select [Cassette 1 Size],
[Cassette 2 Size] or [Cassette 3 Size].
7
8
Press the OK key.
Press the U or V key to select the desired paper
size.
Cassette 1 Size: a b
*Letter
1
*********************
a
2
3
Legal
Statement
a
a
6
9
Press the OK key. The previous screen reappears.
10 Press the U or V key to select [Cassette 1 Type],
[Cassette 2 Type] or [Cassette 3 Type].
11 Press the OK key.
12 Press the U or V key to select the desired paper
Cassette 1 Type: a b
*Plain
type.
1
*********************
2
3
Rough
Recycled
13 Press the OK key. The previous screen reappears.
14 Press the Back key to return to the default System
Menu screen.
15 Now, make the FAX-receiving settings. Refer to
setting procedure.
Select the same paper type as that selected in step
12.
6-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Rings
You can change the number of times to let the phone ring before answering a call as needed. The number of
ringing times can be changed independently for each receiving mode of Auto (Normal), Auto (TAD) and Auto
(FAX/TEL).
NOTE: The number of ringing times can be set to between 1 and 15 times for Rings (Normal) and Rings
(TAD), and 0 and 15 times for Rings (FAX/TEL).
For Rings (FAX/TEL), this change is possible with some countries.
1
2
Press the U or V key to select [Rings(Normal)],
[Rings(TAD)] or [Rings(FAX/TEL)].
3
4
Press the OK key.
Press the U or V key to enter the number of
ringing times.
5
Press the OK key.
6-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Receiving Mode
The following five receiving modes are available.
•
•
•
•
•
FAX Automatic Reception [Auto (Normal)]
Select the mode appropriate for the way the machine is used.
NOTE: DRD reception mode is available for some countries.
1
2
3
4
Press the U or V key to select [RX Settings].
Press the OK key.
6
Press the U or V key to select the desired
receiving mode.
5
6
Press the OK key. Proceed to the next step if you
selected [Auto(DRD)] in step 4.
Press the U or V key to select the DRD Pattern.
Pattern
Description
Pattern 1
Pattern 2
Pattern 3
Pattern 4
Normal Ring
Double Ring
Short-Short-Long
Short-Long-Short
7
Press the OK key.
6-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Reception Date/Time
Reception Date/Time function adds the reception date/time, sender information and number of pages on the top
of each page when the message is printed out. It is useful for confirming the time of reception if the fax is from
a different time zone.
NOTE: When the received data is printed on multiple pages, the reception date/time is printed on the fist page
only. It is not printed on the pages that follow.
When the received fax data is forwarded after retrieving it from memory, the reception date/time is not added to
the forwarded data.
1
2
3
4
5
Press the U or V key to select [RX Date/Time].
Press the OK key.
Press the U or V key to select [On].
Press the OK key.
6-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
2 in 1 Reception
When you receive a multi-page Statement or A5 size original, this function prints 2 pages of the original at a
time on one Letter or A4 size sheet of paper.
1
2
3
4
5
Press the U or V key to select [2 in 1 Printing].
Press the OK key.
Press the U or V key to select [On] or [Off].
Press the OK key.
6
6-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Print all at once [Batch Print]
When a multi-page fax is received, the pages are printed in a batch after all pages are received. If [Off] is set,
each page is printed as it is received.
1
2
3
4
5
Press the U or V key to select [Batch Print].
Press the OK key.
Press the U or V key to select [On] or [Off].
Press the OK key.
6-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Encryption
This method allows you to communicate with originals encrypted by the sending system. Therefore, even when
a third party tries to view the originals in the middle of communication by some means, the third party is
prevented from knowing the actual contents of the originals. The originals received are reverted to the originals
as they were before transmission (decrypted) by the receiving system, and printed. This is an extremely
effective communication method for sending confidential documents that are not to be opened by a third party.
IMPORTANT: In order to use encryption communication, the fax of the other party needs to be an our-brand
system with the same type of encryption functions.
In encryption communication, in order to encrypt and decrypt originals, the sending and receiving systems must
use the same 16-digit encryption key. When the encryption key differs between the sending system and the
receiving system, the encryption cannot be conducted. Therefore, the sending system and the receiving system
need to have the same encryption key and 2-digit key No. registered in advance.
6
Sending system
Encrypt
Receiving system
Decrypt
Scan originals
Encryption
Output originals
Description of settings at sending and receiving systems
Sending
Receiving
system
Reference
page
Settings
system
Encryption Key No.
Encryption Key
(A) 2 digits
(C) 16 digits
(A) 2 digits
(B) 2 digits
(C) 16 digits
Key No. of Address Book
(or when the number is
directly dialed)
Receiving system
encryption box number
(D) 4 digits
†
Encryption Box No.
(D) 4 digits
(B) 2 digits
-
Key No. in reception
setting
†.
When the machine receives originals, the Encryption Box is not used.
NOTE: Set the same characters for the numbers indicated by the same letter in parentheses. For example,
the same characters should be used as the encryption key (C) in both the sending and receiving systems.
6-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Registering an Encryption Key
An encryption key is required when registering the Address Book used for encryption communication (the other
party is directly entered using the numeric keys) in the sending system and when setting encryption in the
receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from A to F are arranged to form 16
numbers and/or letters arbitrarily.
NOTE: Up to 20 encryption keys can be registered.
1
2
3
4
Press the U or V key to select [Encryption Key].
Press the OK key.
Press the U or V key to select an unregistered
encryption key, and then press [Menu] (the Right
Select key).
Encryption Key:
a b
*********************
1
Key 01
2
3
Key 02
Key 03
[ Menu ]
5
Press the U or V key to select [Register].
Menu:
Register
a b
*********************
1
Appendix-2 for details on entering characters.
2
3
Detail
Delete
6
7
Press the OK key.
Use the numeric keys to enter the 16-digit
encryption key.
8
9
Press the OK key.
Repeat steps 4 to 8 to register other encryption
keys.
Confirming and Deleting Registration Contents of Encryption Key
1
Follow steps 1 to 7 of Registering an Encryption
6-22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
2
Press the U or V key to select the encryption key
that you want to confirm or delete.
Encryption Key:
a b
*********************
1
Key 01
2
3
Key 02
Key 03
[ Menu ]
3
4
Press [Menu] (the Right Select key).
Confirming the encryption key
1
Press the U or V key to select [Detail].
Menu:
Register
Detail
a b
1
2
*********************
3
Delete
6
2
Press the OK key. Proceed to step 5.
Deleting the encryption key
1
Press the U or V key to select [Delete].
Menu:
a b
1
2
Register
Detail
3 Delete
*********************
2
3
Press the OK key.
Press [Yes] (the Left Select key). This deletes
Delete.
the encryption key.
Are you sure?
z
Key 01
[ Yes ]
[ No ]
5
Repeat steps 2 to 4 to confirm or delete other
encryption keys.
6-23
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Operation at the Sending System
When sending originals by encrypted transmission, use the Address Book registered for encryption or set
encrypted transmission when dialing directly using the numeric keys.
NOTE: Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
1
Register the encryption key you have arranged
Encryption Key on page 6-22.) When an
encryption key has already been registered, go to
the next step.
2
3
4
Press the FAX key.
Place the originals.
Use the numeric keys to enter the FAX number of
the other party, and press [Detail] (the Right
Select key).
FAX No. Entry:
0123456789
A b
*
NOTE: When encrypted transmission has been set to
a destination in the Address Book or One-touch keys,
you can use the destination.
[ Chain ] [ Detail ]
5
Press the Y or Z key to select [Encrypted TX].
FAX Detail:
C b
Encrypted TX: 2/ 4
Off
[ Change ]
6
7
Press [Change] (the Right Select key).
Press the U or V key to select [On].
Encryption:
*Off
On
a b
1
2
*********************
8
Press the OK key.
6-24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
9
Press the U or V key to select the desired
encryption key number.
Encryption Key:
a b
*********************
1
----------------
2
3
*Key 02
Key 03
10 Press the OK key.
11 Press the U or V key to select [On] or [Off].
Encryption Box:
*Off
a b
*********************
1
NOTE: When the machine receives originals, the
encryption box is not used.
2
On
6
12 Press the OK key. Proceed to the next step or step
15 when [On] or [Off] is selected in step 11,
respectively.
13 Use the numeric keys to enter the box number
Box Number Entry: M b
(0000 - 9999)
****0000*
(0000 to 9999).
14 Press the OK key.
15 Press the Start key. The transmission will start.
NOTE: When On is selected in Destination Check
before Send, a destination confirmation screen is
displayed when you press the Start key. For details,
Operation at the Receiving System
To conduct encryption communication operating the receiving system, follow the steps below.
NOTE: In encryption communication, sub address communication cannot be used.
1
2
Register the encryption key you have arranged
with the sending system. (Refer to Registering an
6-25
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
3
4
5
Press the U or V key to select [Encryption RX].
Press the OK key.
Press the U or V key to select [On].
Encryption RX:
*Off
On
a b
1
2
*********************
6
7
Press the OK key.
Press the U or V key to select the desired
encryption key number.
Encryption Key:
a b
*********************
1
*Key 01
2
3
Key 02
Key 03
8
9
Press the OK key.
The sending system conducts encrypted
transmission. When encryption communication is
conducted normally, the machine decrypts the
encrypted originals received and prints the
originals.
6-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Duplex Print Output
When received multiple pages of data are the same width, they can be printed out on both sides of paper having
the same width as the data.
1
2
3
4
5
Press the U or V key to select [Duplex Printing].
Press the OK key.
Press the U or V key to select [On] or [Off].
Press the OK key.
6
6-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Transmission Restriction
This function allows you to send or receive originals only when communication requirements are met. Using this
function can limit other parties with which you can communicate.
Specifically, you must register communication requirements (Permit FAX No./Permit ID No.) and set the
transmission limit in advance. When the machine sends or receives originals, you do not need to perform a
special operation for this particular function, and you can operate the machine normally. When sending or
receiving has actually started, the machine correctly conducts transmission that meets communication
requirements, but when the transmission does not meet the requirements, the machine indicates an error. This
mode also allows you to set a [Reject List] for Reception Restriction so that reception from senders on the list
of Rejected FAX numbers or from senders whose Local FAX Number is not registered are rejected.
NOTE: Before using transmission restriction, be sure to read the following prerequisites, communication
establishing requirements, and reception rejection requirements thoroughly, and consult with the other parties
with which you communicate.
Communication Establishing
Prerequisites
Requirements
•
•
Register Permitted FAX
numbers or Permitted ID
•
The recipient’s Local FAX
Number matches a Permitted
FAX No. registered on the
machine.
†
•
•
The recipient’s Local FAX ID
matches a Permitted ID
registered on the machine.
Send
Restrictions
Send restriction settings are
specified in [Permit+Addr Book]
in Send Restrictions. (Refer to
When the number was dialed
using the Address Book or One-
touch keys, the last 4 digits of
the dialed number match the
last 4 digits of the recipient’s
Local FAX Number. (Excludes
manual transmissions.)
•
•
Register the Local FAX
Numbers or Local FAX IDs of
other parties.
Register Permitted FAX
numbers or Permitted ID
•
The sender’s Local FAX
Number matches a Permitted
FAX No. registered on the
machine.
††
numbers. (Refer to
•
•
The sender’s Local FAX ID
matches a Permitted ID
registered on the machine.
Reception
Restrictions
•
•
Reception restriction settings
are specified in [Permit+Addr
Book] in Reception Restrictions.
(Refer to Setting Reception
A fax number that matches the
last 4 digits of the sender’s
Local FAX Number is registered
in the Address Book on this
machine.
Register the Local FAX
Numbers or Local FAX IDs of
other parties.
6-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
†.
If there is neither a Permitted FAX No. nor a Permitted ID No. registered for the recipient,
sending is not rejected.
††. If there is neither a Permitted FAX No. nor a Permitted ID No. registered for the sender,
reception is not rejected.
Reception Rejection
Prerequisites
Requirements
•
•
Register Reject FAX
numbers. (Refer to
•
•
The sender’s Local FAX
Number is not registered.
†
The sender’s Local Fax
Number matches a Reject
FAX No. registered on the
machine.
Reception
Rejection
Reception restriction settings
are specified in [Reject List] in
Reception Restrictions. (Refer
6
†.
If there are no Reject FAX numbers registered, calls are only rejected from senders
whose Local FAX Numbers (Indicates local FAX information entries, not the actual line
numbers.) are not registered.
Part that is operated
Registering Permit FAX No.
NOTE: Up to 10 Permit FAX numbers can be registered.
1
2
Press the U or V key to select [Permit No. List].
TX/RX Restrict.: a b
1
2
TX Restriction
RX Restriction
3
*********************
Permit No. List
[ Exit ]
3
Press the OK key.
6-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
4
5
Press [Menu] (the Right Select key).
Permit No. List: a b
0667640001
b
*********************
b
b
0667643755
0120123456
[ Menu ]
Press the U or V key to select [Add FAX Number].
Menu:
a b
1
2
Detail/Edit
Delete
Add FAX Number
3
*********************
6
7
Press the OK key.
Use the numeric keys to enter a Permit FAX
number. Up to 20 digits can be entered.
FAX No. Entry:
T b
*
S
NOTE: Press the Address Recall/Pause key to
insert a pause (-) between two digits.
Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete all entered digits and return to the default screen,
press the Reset key.
8
9
Press the OK key.
When registering other Permit FAX numbers,
repeat steps 4 to 8.
Changing and Deleting Permit FAX No.
1
2
Follow steps 1 to 4 of Registering Permit FAX No.
Press the U or V key to select the Permit FAX No.
to be changed or deleted.
Permit No. List: a b
b
*********************
0667640001
b
b
0667643755
0120123456
[ Menu ]
3
Press [Menu] (the Right Select key).
6-30
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
4
Changing Permit FAX No.
1
Press the U or V key to select [Detail/Edit].
Menu:
a b
*********************
1
Detail/Edit
2
3
Delete
Add FAX Number
2
3
Press the OK key.
Use the numeric keys to reenter the Permit
FAX number. Up to 20 digits can be entered.
FAX No. Entry:
0667640001
C b
*
S
NOTE: Press the Address Recall/Pause key to
insert a pause (-) between two digits.
6
Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to
delete the digits one by one before reentering the
number. To delete all entered digits and return to
the default screen, press the Reset key.
4
Press the OK key. Proceed to step 5.
Deleting Permit FAX No.
1
Press the U or V key to select [Delete].
Menu:
Detail/Edit
Delete
a b
1
2
*********************
Add FAX Number
3
2
3
Press the OK key.
Press [Yes] (the Left Select key). This deletes
Delete.
the Permit FAX number.
Are you sure?
z b 0667640001
[ Yes ]
[ No ]
5
To change or delete other Permit FAX numbers,
repeat steps 2 to 4.
6-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Registering Reject FAX No.
NOTE: Up to 10 Reject FAX numbers can be registered.
1
2
Press the U or V key to select [Reject No. List].
TX/RX Restrict.: a b
3
4
Permit No. List
Permit ID List
5
*********************
Reject No. List
[ Exit ]
3
4
Press the OK key.
Press [Menu] (the Right Select key).
Reject No. List: a b
b
*********************
0667640001
b
b
0667643755
0120123456
[ Menu ]
5
Press the U or V key to select [Add FAX Number].
Menu:
a b
1
2
Detail/Edit
Delete
Add FAX Number
3
*********************
6
7
Press the OK key.
Use the numeric keys to enter a Reject FAX
number. Up to 20 digits can be entered.
FAX No. Entry:
T b
*
S
NOTE: Press the Address Recall/Pause key to
insert a pause (-) between two digits.
Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to delete the
digits one by one before reentering the number. To
delete all entered digits and return to the default screen,
press the Reset key.
8
9
Press the OK key.
To register other Reject FAX numbers, repeat
steps 4 to 8.
6-32
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Changing and Deleting Reject FAX No.
1
2
Follow steps 1 to 7 of Registering Reject FAX No.
Press the U or V key to select the Reject FAX No.
to be changed or deleted.
Reject No. List: a b
b
*********************
0667640001
b
b
0667643755
0120123456
[ Menu ]
3
4
Press [Menu] (the Right Select key).
Changing Reject FAX No.
1
Press the U or V key to select [Detail/Edit].
6
Menu:
Detail/Edit
a b
*********************
1
2
3
Delete
Add FAX Number
2
3
Press the OK key.
Use the numeric keys to reenter the Reject
FAX number. Up to 20 digits can be entered.
FAX No. Entry:
0667640001
C b
*
S
NOTE: Press the Address Recall/Pause key to
insert a pause (-) between two digits.
Press the Y or Z key to move the cursor.
To correct the number, press the Clear key to
delete the digits one by one before reentering the
number. To delete all entered digits and return to
the default screen, press the Reset key.
4
Press the OK key. Proceed to step 5.
Deleting Reject FAX No.
1
2
Press the U or V key to select [Delete].
Menu:
Detail/Edit
Delete
a b
1
2
*********************
3
Add FAX Number
Press the OK key.
6-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
3
Press [Yes] (the Left Select key). This deletes
Delete.
the Reject FAX number.
Are you sure?
z b 0667640001
[ Yes ]
[ No ]
5
To change and delete other Reject FAX numbers,
repeat steps 2 to 4.
Registering Permit ID No.
NOTE: Up to 5 Permit ID numbers can be registered.
1
2
Press the U or V key to select [Permit ID List].
TX/RX Restrict.: a b
2
3
RX Restriction
Permit No. List
4
*********************
Permit ID List
[ Exit ]
3
4
Press the OK key.
Press [Menu] (the Right Select key).
Permit ID List:
0004
a b
*********************
b
b
0007
[ Menu ]
5
Press the U or V key to select [Add FAX ID].
Menu:
a b
1
2
Detail/Edit
Delete
Add FAX ID
3
*********************
6-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
6
7
Press the OK key.
Use the numeric keys to enter a Permit ID number
(0000 to 9999).
Permit ID:
(0000 - 9999)
****0000*
M b
NOTE: Press the Clear key to display the previous
number.
8
9
Press the OK key.
To register other Permit ID numbers, repeat steps
4 to 8.
Changing and Deleting Permit ID No.
6
1
2
Follow steps 1 to 7 of Registering Permit ID No. on
Press the U or V key to select the Permit ID No.
to be changed or deleted.
Permit ID List:
0004
a b
*********************
b
b
0007
[ Menu ]
3
4
Press [Menu] (the Right Select key).
Changing Permit ID No.
1
Press the U or V key to select [Detail/Edit].
Menu:
Detail/Edit
a b
*********************
1
2
3
Delete
Add FAX ID
2
3
Press the OK key.
Use the numeric keys to reenter a Permit ID
number (0000 to 9999).
Permit ID:
(0000 - 9999)
****0004*
D b
NOTE: Press the Clear key to display the
previous number.
4
Press the OK key. Proceed to step 5.
6-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Deleting Permit ID No.
1
Press the U or V key to select [Delete].
Menu:
Detail/Edit
Delete
a b
1
2
*********************
3
Add FAX ID
2
3
Press the OK key.
Press [Yes] (the Left Select key). This deletes
Delete.
the Permit ID number.
Are you sure?
z b 0004
[ Yes ]
[ No ]
5
To change and delete other Permit ID numbers,
repeat step 2 to 4.
Setting Send Restriction
You can restrict the other parties to which you send originals only to the ones registered in Permit FAX No. and
Permit ID No. as well as the ones registered in the Address Book. To change the sending restriction, follow the
steps below.
1
2
Press the U or V key to select [TX Restriction].
TX/RX Restrict.: a b
TX Restriction
1
*********************
2
3
RX Restriction
Permit No. List
[ Exit ]
3
4
Press the OK key.
Press the U or V key to select sending restriction.
To not use the sending restriction, select [Off]. To
restrict the other parties only to the ones registered
in Permit FAX No. and Permit ID No. as well as the
ones registered in the Address Book, select
[Permit+Addr Book].
5
Press the OK key.
6-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Setting Reception Restriction
You can restrict incoming faxes so that you only receive originals from senders registered in Permit FAX No.
and Permit ID No. and senders registered in your Address Book. This mode also allows you to set a [Reject
List] for Reception Restriction so that reception from senders on the list of Rejected FAX numbers or from
senders whose Local FAX Number is not registered are rejected. To change the reception restriction, follow the
steps below.
1
2
Press the U or V key to select [RX Restriction].
TX/RX Restrict.: a b
TX Restriction
RX Restriction
1
2
*********************
Permit No. List
[ Exit ]
3
6
3
4
Press the OK key.
Press the U or V key to select reception
restriction. To not use the reception restriction,
select [Off]. To restrict the other parties only to the
ones registered in Permit FAX No. and Permit ID
No. as well as the ones registered in the Address
Book, select [Permit+Addr Book]. To block
incoming faxes from senders registered in Reject
FAX No., select [Reject List].
5
Press the OK key.
Unknown Number Reception
Select whether to receive the fax of that the number is unknown when [Reject List] is set for Reception
Restriction. To change the reception restriction for the unknown fax number, follow the steps below.
1
2
Press the U or V key to select [UnknownNumber
RX].
TX/RX Restrict.: a b
4
5
Permit ID List
Reject No. List
6
*********************
UnknownNumber RX
[ Exit ]
3
Press the OK key.
6-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
4
5
Press the U or V key to select the reception
restriction number. To permit reception, select
[Permit]. To reject reception, select [Reject].
UnknownNumber RX: a b
*Reject
1
*********************
2
Permit
Press the OK key.
6-38
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
Remote Diagnostics
If a problem arises with this machine and you contact our service representative, this feature enables our
Service Center computer to access the machine over the phone and check the machine’s status or look for
problems.
NOTE: To use Remote Diagnostics, you must first sign an agreement with our service representative and
register a Predetermined ID on the machine. For more information, contact your Service Representative or
Authorized Service Center.
1
2
3
4
5
6
7
8
9
Press the U or V key to select [Service Setting].
Press the OK key.
6
Press the U or V key to select [Remote Diag.Set.].
Press the OK key.
Press the U or V key to select [On].
Press the OK key.
Press the U or V key to select [Remote Diag. ID].
Use the numeric keys to enter the prespecified
remote diagnostics ID number (0000 to 9999).
10 Press the OK key.
6-39
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup and Registration
6-40
Download from Www.Somanuals.com. All Manuals Search And Download.
7 About Network FAX
This chapter explains how to use Network FAX.
Please also read the Network FAX Driver Operation Guide (Online Manual) contained in the
included CD-ROM, which describes how to operate your PC to send a fax using Network FAX
and make various settings.
• What is Network FAX?................................................................................................. 7-2
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
About Network FAX
What is Network FAX?
The Network FAX function enables any PC, which is networked to the machine, to perform sending and
receiving of faxes. Its primary features include the following.
•
•
•
•
•
•
•
PC-prepared document can be sent and received by fax without being printed out.
An Address Book (in the machine/PC) can be used to specify a desired destination.
Addition of a cover page.
Transmission and printing can be done simultaneously.
E-mail reporting of the transmission result.
Sub address transmission is available.
Operation is as simple as printing.
Flow of Network FAX Sending
Network FAX sending is performed in the following sequence.
Prepare a document using a PC networked to this machine.
T
Forward the document data from the PC to this machine using the same
operation as for printing.
T
The machine sends the document data to another fax machine.
T
The other fax machine receives the data.
Flow of Network FAX Receiving
Network FAX receiving is performed in the following sequence.
Another fax machine sends a fax to this machine.
T
The machine receives the fax.
T
The machine sends the fax data to a networked PC using the memory
forwarding function.
T
The PC networked to this machine receives the data.
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
About Network FAX
NOTE: The memory forwarding function allows not only reception by the networked PC, but also forwarding
of the received fax by e-mail or forwarding to another fax machine.
7
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
About Network FAX
Setup
The following preparation is needed before using Network FAX.
Flow of Setup
Connection to a PC
Connect the machine to a PC using the network cable. For details, refer to the machine’s Operation Guide.
Machine Registration
Using the memory transmission function, select the recipient PC or file format.
NOTE: Use the memory transmission function to forward the received fax to the PC or forward it as an e-mail
attachment. For details, refer to Printing/Forwarding Received Documents (Memory Forwarding) on page 4-
16.
Installing Software on the PC
Install the dedicated software (included in the supplied CD-ROM) on your PC required to use Network FAX. For
details, refer to the Network FAX Driver Operation Guide contained in the included CD-ROM.
Network FAX Driver Operation Guide
The Network FAX Driver Operation Guide (Online Manual) is contained in the included CD-ROM in PDF
(Portable Document Format). The main contents include the following.
•
•
•
•
Installing Network FAX Driver
Performing Network FAX Sending
Specifying the Network FAX Transmission Settings
Specifying the Cover Letter Settings
Opening the Online Manual
Follow the steps below to refer to the online manual.
1
2
Insert the CD-ROM supplied with the machine into
the CD-ROM drive. An explanation of the licensing
agreement is displayed. If you agree to the terms
of the agreement, click Accept. The main menu
screen then appears.
Click Software Documentation and then
Network FAX Driver. The online manual appears.
NOTE: Adobe Reader 8.0 or later needs to be
installed to view the online manual.
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
This chapter explains how to deal with problems.
• Indicators During Sending/Receiving Operation.......................................................... 8-2
• Precautions When Turning Power OFF....................................................................... 8-3
• Error Messages ........................................................................................................... 8-4
• Troubleshooting........................................................................................................... 8-6
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Indicators During Sending/Receiving Operation
The Processing and Memory indicators show the fax
transmission status.
•
•
•
The Processing indicator blinks when the machine
is sending/receiving a fax.
The Memory indicator blinks when source data is
being stored in memory for memory transmission.
The Memory indicator is lit when there is source
data stored in the memory for delayed
transmission.
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Precautions When Turning Power OFF
To receive faxes with the power turned off, press the Power key on the operation panel. You cannot
automatically receive a fax when the main power switch is turned off.
Before turning off the main power switch, press the Power key on the operation panel. Make sure that the
Memory indicator is off before turning off the main power switch.
CAUTION: The device may still be operating as long as the Memory indicator is lit. Turning the
machine off at the main power switch while the memory indicator is lit, may cause malfunctions.
8
Make sure that the indicator is off.
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Error Messages
When an error occurs, the display may show one of the error messages listed below. These will help you identify
and correct the problem.
NOTE: When a transmission error occurs, a sent/receipt result report is produced. Check the error code
shown in the report and refer to the Error Code List on Appendix-12 for a description. To print the sent/receipt
Reference
Message
Machine failure.
Checkpoint
Corrective Action
Page
–
Turn the main power switch
off and on, or unplug the
power cord and plug it in
again. If the message still
appears, note the error code.
Turn the main power switch
off and unplug the power
cord. Call your service
representative.
–
Call service.
Polling box limit exceeded.
Job is canceled.
–
–
Polling box capacity is used
up with document data.
Press the OK key. The job is
canceled.
Try to perform the job again
after printing or deleting the
data in the polling box.
Job Accounting restriction
exceeded.
The number of paper used
has exceeded the limit
preset by Job Accounting.
No further operation is
possible. Press the OK key.
The job is canceled.
Refer to the
machine’s
Operation
Guide.
Try to perform the job again
after resetting the limit for
paper use.
Job Accounting restriction
exceeded.
Cannot scan.
–
Fax transmission is
prohibited by Job
Accounting. No further
operation is possible. Press
the OK key. The job is
canceled.
Refer to the
machine’s
Operation
Guide.
Check the setting for Job
Accounting.
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Reference
Page
Message
Checkpoint
Corrective Action
The phone receiver is off the Is the phone (commercially
Hang up the handset.
–
hook. Hang Up.
available) connected to the
machine off the hook?
Scheduled sending jobs
exceeded.
–
The number of jobs has
exceeded the limit set for
delayed transmission. Press
the OK key. The job is
canceled.
Wait until the delayed
transmission is executed, or
cancel the delayed
transmission and then
perform the job again.
Add paper in cassette 1 (~3). Is the indicated cassette or
Add paper of the same size
as indicated. When the type
of printing paper is specified,
the necessary paper types
are also displayed.
–
or
MP tray out of paper?
Add paper in MP tray.
To use another paper
8
source, select the paper
source and press the OK
key. To use another paper
source, press [Paper] (the
Right Select key), select the
desired paper source, and
then press the OK key.
Is the type of printing paper
specified?
The cassette for the
–
–
specified paper type is not
available. Press [Paper] (the
Right Select key), select
another paper source, and
then press the OK key.
Is the cassette securely
loaded?
Remove the cassette and
reload it completely.
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
When a problem occurs, first check the following. If the problem persists, contact your dealer or service
representative.
Reference
Page
Symptom
Checkpoint
Corrective Action
Cannot send document.
Is the modular cord
connected correctly?
Connect the modular cord
correctly.
–
Is Communication error
displayed?
Remedy the cause of error
and send again.
Is TX (transmission)
restriction activated?
Cancel the TX restriction.
Cannot perform broadcast
transmission.
Is free space available in the
memory?
Check the job status, and if
there are unneeded jobs,
–
cancel the jobs to free memory,
or wait until transmission/
reception of jobs being printed /
jobs on standby is finished.
Cannot perform encrypted
communication.
Are the registrations correct
both at sender and recipient? registrations both at sender
and recipient.
Double-check the
Cannot use the remote
switching function.
Is a pulse line used?
Some phones may transmit
tone signals using buttons.
Refer to the operation
–
manual of your phone set.
Is the remote switching
number correct?
Check the registration.
(Default: 55)
No print output after
reception.
Is memory forwarding
activated?
Check the forwarding
destination.
–
Cannot receive document.
Is the modular cord
connected correctly?
Connect the modular cord
correctly.
–
Is Communication error
displayed?
Remedy the cause of error
and ask the sender to retry.
Is RX (reception) restriction
activated?
Cancel the RX restriction.
Cannot perform memory
reception.
Is free space available in the
memory?
Check the job status, and if
there are unneeded jobs,
–
cancel the jobs to free memory,
or wait until transmission/
reception of jobs being printed /
jobs on standby is finished.
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Reference
Page
Symptom
Checkpoint
Corrective Action
Cannot perform sub
address transmission.
Is the recipient fax machine
equipped with a sub address cannot be performed unless
Sub address transmission
–
transmission feature?
the recipient fax machine has
a similar sub address
transmission feature.
sub address password
identical to the sub address
or sub address password
with the recipient. This
machine does not use a sub
address password for
registered in the recipient fax reception.
machine?
Is free space available in the
memory of the recipient fax
machine?
Check with the recipient.
–
Cannot perform memory
forwarding.
Is memory forwarding set to
[On]?
Check the memory
forwarding setting.
Cannot perform memory
forwarding using a sub
address.
Is the recipient fax machine
equipped with a sub address cannot be performed unless
transmission feature?
Sub address transmission
–
8
the recipient fax machine has
a similar sub address
transmission feature.
Is the entered sub address
identical to the sub address
with the recipient. This
registered in the recipient fax machine does not use a sub
machine?
address password for
reception.
Cannot output from a Sub
Address Box.
Is the box password been
set?
Enter the correct box
password.
Cannot use polling
reception.
Is polling transmission being
used correctly on the sending
machine?
Check with the recipient.
–
Cannot use sub address
bulletin board
Does the other party’s fax
machine have the same sort
If the other party’s fax
machine does not have the
–
communication.
of sub address bulletin board same sort of sub address
communication function?
bulletin board communication
function, it cannot receive
faxes via a sub address
bulletin board. Check with
the recipient.
Is the entered sub address or If your entry is correct, check
–
sub address password
correct?
with the recipient.
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
8-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
• Character Entry Method ................................................................................. Appendix-2
• Menu List........................................................................................................ Appendix-7
Appendix-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Character Entry Method
In character entry screens, use the procedure below to enter characters.
Keys Used
Use the following keys to enter characters.
2
1
6
5
7
3
4
1. OK Key
Press this key to finalize the entered character(s).
2. Clear Key
Press this key to delete the character at the cursor position. If the cursor is at the end of
the line, the character to the left of it is deleted.
3. Back Key
Press this key to return to the screen from which you invoked the character entry screen.
Use these to select the entry position, or select a character from the character list.
Use these keys to select the character you want to enter.
4. Cursor Keys
5. Numeric Keys
6. Reset Key
Press this key to cancel the character entry procedure and return to the standby screen.
7. Right Select Key Press this key to select the type of characters you want to enter. (When [Text] is
displayed)
Appendix-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Type of Characters
To enter characters, the following three types are available:
ABC
123
Symbols
To enter alphabets.
To enter numerals.
To enter symbols.
In a character entry screen, press [Text] (the Right
Select key) to select the type of characters you
want to enter.
File name input:
OsakaSD3
*
123
[ Text ]
Current character type
Each time you press [Text] (the Right Select key),
the character type switches as follows: ABC, 123,
Symbol, ABC ...
ABC
[ Text ]
123
[ Text ]
Symbols:
a b
[ Text ]
NOTE: By pressing
on the numeric keys while
entering characters, you can directly display the
Symbols screen.
Appendix-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering Characters
After selecting a character type, use the procedure below to enter characters.
Entering Alphabets and Numerals
Referring to the table below, press the key corresponding to the character you want to enter until it is displayed.
Key
Entry mode
Available characters
. @ - _ / : ~ 1
Alphabetic/Symbol
Numeric
1
Alphabetic/Symbol
Numeric
a b c A B C 2
2
Alphabetic/Symbol
Numeric
d e f D E F 3
3
Alphabetic/Symbol
Numeric
g h i G H I 4
4
Alphabetic/Symbol
Numeric
j k l J K L 5
5
Alphabetic/Symbol
Numeric
m n o M N O 6
6
Alphabetic/Symbol
Numeric
p q r s P Q R S 7
7
Alphabetic/Symbol
Numeric
t u v T U V 8
8
Alphabetic/Symbol
Numeric
w x y z W X Y Z 9
9
Alphabetic/Symbol
Numeric
. , - _ ’ ! ? (space) 0
0
Alphabetic/Symbol
Numeric
Switch between upper-/lowercase
†
* or . (decimal point)
Alphabetic/Symbol
Numeric
#
†.
'*' is entered when [123] is selected in the character type selection,
or '.' is entered when only numerals are entered and no character
type is selected.
Appendix-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Characters associated with different keys can be entered consecutively. To enter a character associated with
the same key after another, use cursor keys to move the cursor to the next entry position before entering it.
If you use cursor keys to move the cursor to an entry position apart from the end of the line and enter a character
there, spaces are automatically entered in between.
Entering Symbols
Press [Text] (the Right Select key) or # on the
Symbols:
a b
numeric keys to display the Symbols screen. Use
cursor keys to select the symbol you want to enter
and then press the OK key.
[ Text ]
Entry When [Select Character] Is Selected in Login Operation Settings
In the login screen that appears when user management is enabled, the character entry method may vary
depending on the settings. (For the Login Operation, refer to the machine's Operation Guide.)
If a character palette appears on the screen, use
Login User Name: a b
Kyocer
abcdefghijklmnopqrst
cursor keys to select the desired character from
the displayed characters, and then press the OK
key to enter it.
*
*
uvwxyzABCDEFGHIJKLMNO
[ Next ]
NOTE: Numerals can be entered directly by pressing
numeric keys.
Appendix-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Fax function)
NOTE: Specifications are subject to change without notice.
Item
Description
Type
FS-C2126MFP
G3
Compatibility
Communication Line
Transmission Time
Transmission Speed
Subscriber telephone line
3 seconds or less (33600 bps, JBIG, ITU-T A4 #1 chart)
33600/31200/28800/26400/24000/21600/19200/16800/14400/12000/9600/
7200/4800/2400 bps
Coding Scheme
JBIG/MMR/MR/MH
Error Correction
ECM
Original Size
Max. width: 8 33/64"/216 mm, Max. length: 14 1/64"/356 mm
Max. 50 sheets
Automatic Document Feed
Scanner Resolution
Horizontal × Vertical
200 × 100 dpi Normal (8 dot/mm × 3.85 line/mm)
200 × 200 dpi Fine (8 dot/mm × 7.7 line/mm)
200 × 400 dpi Super Fine (8 dot/mm × 15.4 line/mm)
400 × 400 dpi Ultra Fine (16 dot/mm × 15.4 line/mm)
Printing Resolution
Gradations
600 × 600 dpi
256 shades (Error diffusion)
22 keys
One-Touch Key
Multi-Station Transmission
Max. 100 destinations
Substitute Memory Reception 256 sheets or more (when using ITU-T A4 #1)
Image Memory Capacity
Report Output
3.5 MB (standard) (for incoming faxed originals)
Sent result report, FAX RX result report, Report for job canceled before
sending, Activity report, Status page
Appendix-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu List
The function keys on the message display and operation panel have the following menus. Refer to this list as
necessary when you operate the machine. Click a page number below to jump to the setting procedure for that
function.
FAX Key
Function Menu Key
Original Image (page 4-44)
FAX Resolution (page 3-6)
File Name Entry (page 4-24)
FAX Delayed TX (page 4-2)
Density (page 3-7)
Duplex (page 4-55)
Status/Job Cancel Key
Print Job Log (page 5-3)
Send Job Log (page 5-3)
Store Job Log (page 5-3)
Document Box
Key
Polling Box (page 4-48)
Store File (page 4-44)
Appendix-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued from previous page
System Menu/
Report
Report Print
Status Page (page 5-10)
Counter Key
Admin Rpt Set.
JobFinish Notice (page 4-56)
FAX Speaker (page 6-9)
Result Rpt Set.
Sound
Common
Settings
FAX Monitor (page 6-9)
Cassette 2 Set. (page 6-14)
Cassette 3 Set. (page 6-14)
Date Setting
Timer Setting
Date/Time (page 2-6)
Time Zone (page 2-6)
Summer Time (page 2-6)
Unusable Time (page 6-10)
FAX
Transmission
Local FAX Name (page 2-3)
Local FAX ID (page 2-5)
Local FAX Number (page 2-5)
FAX Dialing Mode (page 2-2)
Retry Times (page 6-13)
FAX Media Type (page 6-14)
Rings(Normal) (page 6-16)
Rings(TAD) (page 6-16)
Rings(FAX/TEL) (page 6-16)
Reception
Forward Setting
Forwarding (page 4-16)
Forward Dest.
File Format (page 4-21)
Subject Add.Info (page 4-22)
FTP Encrypted TX (page 4-23)
Forward Time (page 4-20)
File Name Entry (page 4-24)
Print (page 4-23)
Continued on next page
Appendix-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued from previous page
FAX
Reception
RX Date/Time (page 6-18)
2 in 1 Printing (page 6-19)
Batch Print (page 6-20)
Remote SW Dial (page 4-14)
Encryption RX (page 6-21)
Duplex Printing (page 6-27)
TX Restriction (page 6-36)
Permit No. List (page 6-29)
Permit ID List (page 6-34)
Reject No. List (page 6-32)
UnknownNumber RX (page 6-37)
TX/RX Restrict.
Document
Box
Polling Box
Delete TX File (page 4-43)
OverwriteSetting (page 4-43)
Edit
Address Book (page 3-15)
Destination
Adjust/Maint. Service Setting
FAX Country Code. (page 6-6)
Remote Diag.Set. (page 6-40)
Remote Diag. ID (page 6-40)
Appendix-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Received FAX Sizes and Paper Priority (Inch Model)
When no paper loaded in the cassettes matches the received fax size and orientation, the machine
automatically chooses the printing paper according to the following priority.
Same Size Override
Received FAX Size
ST
ST
LT
LT
LT
LG
LG
†
1
2
3
† ††
,
LG
LT
LT
†
LG
†.
Paper orientation is different from the received document. The
image is printed after being rotated 90° automatically.
††. Received Legal size document is reduced to match Letter size
paper.
: indicates print output on two sheets.
NOTE: The abbreviations denote the following paper sizes.
ST: Statement
LT: Letter
LG: Legal
When a paper type is selected in Media Type, a received fax is printed using the matching paper source. (Refer
Even if [All Media Types] is selected, paper types such as transparency cannot be used for fax printouts.
Appendix-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Received FAX Sizes and Paper Priority (Metric Model)
When no paper loaded in the cassettes matches the received fax size and orientation, the machine
automatically chooses the printing paper according to the following priority.
Same Size Override
Received FAX Size
A4
A4
FL
FL
FL
A4
A5
A5
A4
FL
B5
1
2
3
4
† ††
,
A4
†.
Paper orientation is different from the received document. The
image is printed after being rotated 90° automatically.
††. Folio size original is reduced to match A4 size paper.
: indicates print output on two sheets.
NOTE: The abbreviations denote the following paper sizes.
FL: Folio
When a paper type is selected in Media Type, a received fax is printed using the matching paper source. (Refer
Even if [All Media Types] is selected, paper types such as transparency cannot be used for fax printouts.
Appendix-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Code List
When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and
Activity Report.
NOTE: If an error occurs during V34 communication, the U in the error codes is replaced by an E.
Error Code
Busy
Possible Cause/Action
Failed to establish connection with the recipient
despite auto redialing the preset number of times.
Send again.
CANCELED
Transmission was canceled due to an action to
cancel transmission.
Reception was canceled due to an action to
cancel reception.
U00300
Paper depletion occurred at the recipient
machine. Check with the recipient.
U00430 - U00462 Reception was canceled because of mismatching
of communication features with the sender
machine although the line connection was
established.
U00601 - U00690 Communication was stopped due to the machine
failure. Send or receive again.
U00700
Communication was stopped due to failure on the
part of the sender or recipient machine.
U00800 - U00811 Page(s) not sent correctly. Send again.
U00900 - U00910 Page(s) not received correctly. Ask the sender to
resend.
U01000 - U01097 Communication error occurred during
transmission. Send again.
U01100 - U01196 Communication error occurred during reception.
Ask the sender to resend.
U01400
Failed to establish communication with the sender
or recipient machine because dialing registered
for a push line system was used in a pulse line
system.
U01500
U01600
Communication error occurred during high-speed
transmission. Send again.
Communication error occurred during reception of
high-speed transmission. Ask the sender to
reduce the transmission speed and send again.
Appendix-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Code
Possible Cause/Action
U01700 - U01720 Communication error occurred during high-speed
transmission. Send again.
U01721
Communication error occurred during high-speed
transmission. Designated transmission speed
may not be available for the recipient machine.
Reduce the transmission start speed and send
again.
U01800 - U01820 Communication error occurred during reception of
high-speed transmission. Ask the sender to
reduce the transmission speed and send again.
U01821
Communication error occurred during reception of
high-speed transmission. Designated
transmission speed may not be available for this
machine. Ask the sender to reduce the
transmission speed and send again.
U03000
U03200
U03300
During polling reception, a fax could not be
received because no originals were set in the
other party’s fax machine. Check with the other
party.
Sub address bulletin board reception was
attempted and the other party’s machine is an our-
brand model, but the specified sub address box
contained no data. Check with the other party.
An error occurred due to either 1 or 2 below.
Check with the other party.
1
2
The other party’s machine is an our-brand
model and transmission restrictions were
found set by the other party during polling
reception. Communication was interrupted
because the password was incorrect.
The other party’s machine is an our-brand
model and transmission restrictions were
found set by the other party during sub
address bulletin board reception.
Communication was interrupted because the
password was incorrect.
U03400
Polling reception was interrupted because the
password entered by the other party did not match
the Local FAX ID on the receiving machine. Check
with the other party.
Appendix-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Code
U03500
Possible Cause/Action
Sub address bulletin board reception was
attempted and the other party’s machine is an our-
brand model, but the specified sub address box
was not registered on the other party’s machine.
Check with the recipient.
U03600
U03700
The other party’s machine is an our-brand model
and sub address bulletin board reception was
interrupted because the specified sub address
password was incorrect. Check with the other
party.
Sub address bulletin board reception was
attempted but the other party’s machine either
does not have a sub address bulletin board
communication function or there were no originals
in any of the originals transfer boxes (sub address
boxes).
U04000
U04100
Specified sub address box is not registered in our-
brand recipient machine, or the sub address does
not match.
Recipient machine is not equipped with a sub
address box function, or the sub address does not
match.
U04200
U04300
Encrypted transmission was canceled because
the specified box is not registered.
Encrypted transmission was canceled because
the recipient fax is not equipped with an encrypted
communication function.
U04400
U04500
U05100
Encrypted transmission was canceled because
the encryption key does not match.
Encrypted reception was canceled because the
encryption key does not match.
Transmission was canceled because
communication requirements are not met due to
the transmission restriction set on this machine.
Check with the recipient.
U05200
U05300
Reception was canceled because communication
requirements are not met due to the reception
restriction set on this machine.
Reception was rejected by the recipient because
communication requirements are not met due to
the reception restriction set on the recipient
machine. Check with the recipient.
Appendix-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Code
U14000
Possible Cause/Action
Reception to the Sub Address Box was stopped
because there is no more free space in the
memory of this machine. Create free space by
outputting the data stored in the memory, or
cancel the reception to the Sub Address Box.
U14100
U19000
Transmission to the Sub Address Box or sub
address box on our-brand recipient machine was
stopped because there is no more free space in
the memory of the recipient machine. Check with
the recipient.
Memory reception was stopped because there is
no more free space in the memory of this
machine. Create free space by outputting the data
stored in the memory, and ask the sender to
resend.
U19100
U19300
Transmission was stopped because there is no
more free space in the memory of the recipient
machine. Check with the recipient.
Transmission was stopped due to a data error
occurring during transmission. Send again.
Appendix-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents of Encryption Key 6-22
Continuous Scan 4-56
Index
D
Date 2-6
Delayed Transmission 4-2
Cancel 3-13
Immediate Transmission 3-13
Density 3-7
Description of Operation Procedure xiii
Direct Transmission 3-3
Cancel 3-13
Numerics
2 in 1 Reception 6-19
A
About this Operation Guide v
Account Management 4-51
Address Book 3-15
Document Processor 1-5
Duplex Print Output 6-27
Change/Deletion 3-24
Printing Address List 3-25
Registering a New Destination 3-15
Search 3-23
E
Select a Destination 3-23
Automatic Send 3-2
E-mail Notice
Job Finish Notice 4-56
B
Reporting FAX Receipt Result 5-11
Encrypted Communication 8-6
Encrypted TX 3-5
Encryption Key 6-21
Batch Transmission Function 4-2
C
Encryption Key No. 6-21
Operation at the Receiving System 6-25
Operation at the Sending System 6-24
Registering an Encryption Key 6-22
Error Code List Appendix-12
Error Messages 8-4
Cancel
Cancelling Delayed Transmission 3-13
Cancelling Direct Transmission 3-13
Cancelling Memory Transmission 3-12
Cancelling Polling or Sub Address
Bulletin Board Transmissions 3-14
Cancelling Transmission (Disconnection
of Communication) 3-13
F
FAX Box Function
FAX Box List 4-40
Renaming Files 4-39
FAX Country Code 6-6
FAX Job History 5-3
Job Log Screen 5-3
FAX/Answering Machine Auto Switch
Cannot perform memory reception 8-6
Cannot perform sub address transmission 8-
Cannot receive document 8-6
Cannot send document 8-6
Chain Dial 4-8
Checking Scheduled Job 4-3
Checking Transmission Results and
Registration Status 5-1
Confirmation Screen of Destinations 5-13
Confirming and Deleting Registration
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Original Orientation 4-55
Original Size Selection 4-55
I
Indicators 8-2
Installation Precautions v
Interrupt Send 4-7
P
Part Names and Functions 1-1
PBX 6-39
Permit Fax No.
J
Job Accounting 4-51
Communication Form Subject to Job
Accounting 4-52
Change/Deletion 6-30
Registration 6-29
Permit ID No.
Change/Deletion 6-35
Registration 6-34
Placing Originals 3-4
Contents 4-51
Limit 4-52
Login 4-54
Polling Communication 4-43
Checking 4-50
L
Deleting Originals in a Polling Box 4-49
Polling Transmission 4-43
Printing from a Polling Box 4-48
Renaming Files 4-50
Local FAX Information 2-5
Local FAX Name 2-4
M
Precautions for Use v
Machine (Names) 1-4
Manual Send 4-10
Media Type for Print Output 6-14
Memory Transmission 3-3
Cancel 3-12
Precautions When Turning Power OFF 8-3
Preparation Before Use 2-1
Printing/Forwarding Received Documents
(Memory Forwarding) 4-16
Changing and Deleting Registration
Contents 4-19
Registering Forwarding Destination 4-17
Setting Forwarding 4-16
Printing/Sending Received Faxes by
Menu List Appendix-7
N
Network FAX 7-1
Flow of Receiving 7-2
Flow of Sending 7-2
Setup 7-4
COMMAND CENTER 4-26
Type of Forwarding Destination 4-16
Program Dial 4-41
How to Change and Delete 4-41
How to Register 4-41
How to Use 4-41
No Print Output 8-6
O
R
One-touch Keys 3-26
Change/Delete 3-28
Registering a New Destination 3-26
Select Destination 3-27
Operation Panel 1-2
Received FAX Sizes and Paper Priority
Receiving Mode 6-17
Reception Date/Time 6-18
Redial 3-29
Original
Changing Retry Times 6-13
1-sided / 2-sided Selection 4-55
Index-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Reject Fax No.
Printing Originals from Sub Address Box
Sub Address Bulletin Board Communication
How to Conduct 4-32
Change/Deletion 6-33
Registration 6-32
Remote Diagnostics 6-40
How to Register 4-14
How to Use 4-15
Sub Address 4-32
Report
Sub Address Password 4-32
Activity Report 5-8
FAX RX Result Reports 5-5
Report for Job Canceled before Sending
T
Send Result Reports 5-5
Status Page 5-10
Sub Address Box List 4-40
Resolution 3-6
Time 2-6
Transmission Restriction 6-28
Communication Establishing
Requirements 6-28
Rings 6-16
Permit FAX No. 6-29
Permit ID No. 6-34
Prerequisites 6-28
S
Reception Rejection Requirements 6-29
Reception Restriction Setting 6-37
Reject FAX No. 6-32
Safety Conventions i
Selection of Transmit Terminal Identification
(TTI) 2-3
Send Restriction Setting 6-36
Unknown Number Reception 6-37
Troubleshooting 8-6
Send Status 3-8
Setup and Registration
Basic Operation Procedure 6-7
Specifications Appendix-6
Standby Transmission 4-6
Sub Address Box Function 4-35
Checking 4-39
U
Unusable Time 6-10
User Accounting 4-51
Contents 4-51
Deleting Originals after Printing from a
Sub Address Box 4-38
Deleting Originals from a Sub Address
Box 4-39
Login 4-53
How to Change 4-36
How to Delete 4-36
V
How to Register 4-35
Volume Adjustment 6-9
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Index-4
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
First Edition 2010.07
2KXKMEN000
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Kustom Stereo Amplifier WAV 210 User Manual
Landice Home Gym 82020 User Manual
Leica Camera Lens 11663 User Manual
LG Electronics Clothes Dryer TD V10150G User Manual
LG Electronics Microwave Oven LCRM1240SW User Manual
Life Fitness Elliptical Trainer CLSXH 0XXX 01 User Manual
Logitech Mouse M115 User Manual
Mackie Headphones Reach User Manual
Melissa Toaster 243 056 User Manual
Melissa Waffle Iron 643 105 User Manual