OWNER’S MANUAL
KXB10 BASS GUITAR AMPLIFIER
KXB10
Congratulations on the purchase of your new Kustom bass amplifier.
Your KXB Model draws on decades of amp design and manufacturing
experience at Kustom. This model was built from the ground up to offer
world-class tone, useful features and reliable performance. Inside this manual,
you’ll find valuable information about the amp’s controls and specifications.
Being familiar with its features will help you effectively dial in different tones.
We wish you many years of enjoyment with your Kustom amplifier.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
FRENCH
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KXB10 Control Panel
KXB10
1
2
3
4
5
6
7
8
1. Input Jack: ¼-inch input that is intended for bass guitar but will accept other instruments as well.
2. Volume: Adjust this control to set the desired volume level of the amplifier. Note: If you are using an instrument with a
built-in active preamp, set its level to mid-position before increasing its volume or distortion may occur.
3. Bass: This control adjusts the lower frequencies to provide rich, full tones. It will boost or cut by 15 dB at 60 Hz.
4. Mid: This control adds a thick, punchy quality to your tone. It will boost or cut by 15 dB at 500Hz.
5. Treble: Increasing this control will add presence and attack to your bass tone. It will boost or cut by 15 dB at 10 kHz.
6. Aux In: This is a 3-conductor, 1/8-inch, stereo jack that allows playback from a Compact Disc, MP3 player or other
audio device. The overall volume level will be determined by the audio device, so start with lower volume levels and
increase as needed.
7. Headphones: This is a 3-conductor, 1/8-inch input jack intended for headphone use. The amplifier’s internal speaker
is disconnected when this jack is used.
8. Power Switch: This dual-function component is both an On/Off power switch and a status indicator light. When
illuminated, it shows that your amplifier is ready to be played. To turn amplifier on, press switch upward. To turn amp off,
press switch downward.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KXB10 Back Panel
KXB10
Power Cord: This supplies AC power to the amplifier. If the cord becomes damaged, take the amplifier to an authorized
service center for repair.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KXB10 Suggested Settings
The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to
get you up and running with your KXB amplifier. Feel free to experiment to achieve your own signature sounds.
KXB10
TRADITIONAL/VERSATILE TONE
In this setting, the amplifier will deliver a traditional, yet versatile, electric bass sound. Whether you are playing Rock,
Country, Blues or Gospel, this setting will get you close. If you play with a pick and want less treble attack on the notes,
decrease the amount of high frequencies using the Treble control. If you need a deeper bottom end, increase the amount
of low frequencies using the Bass control. Adjust the amount of Midrange to best match the tone of your bass guitar and
how it fits into the overall sound.
KXB10
FUNKY, SLAPPED TONES
This style of music needs a strong attack with lots of treble content. Using less Midrange will produce the extra top end
necessary for this type of music. If you use a “slapping” thumb technique, add a bit more low end and extra volume – or
less if you really hit the strings hard. Even though this is a practice or rehearsal-level amplifier, it will deliver the punch
and clarity that you require.
KXB10
ALTERNATIVE STYLE
These settings are designed for upper-end punch and edge that will cut through most any sound mix. This tone will work
well with pick or fingers. Make sure your bass guitar’s volume control is up all the way. Since you’re adding volume, be
careful with the amount of Bass, Mid and Treble that you dial in, as it can also add some distortion to the sound.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Kustom® KXB10 Specifications
10 Watts
4 Ohms at 10% THD+N
Output Power
Speaker
1 X 10”
Custom Designed 4 Ohms
470K Ohm
Single Input
48 dB
Input Impedance
Gain
Volume @ Max, All EQ at 12 o’clock
Below rated power
-80 dB typical
800 mV Sensitivity
S/N Ratio
Stereo 3.5mm High Impedance
Stereo 3.5mm
Aux Input
10 mW @ 30 ohms
per channel
Headphone Output
Amplifier Tone Controls
60 Hz
+/- 15 dB
500 Hz
+/- 15 dB
10 Hz
+/- 15 dB
USA/Canada
120VAC/60Hz, 25W
Power Requirements
Europe
230VAC/50Hz, 25W
240VAC/50Hz, 25W
240VAC/50Hz, 25W
100VAC/50-60Hz, 25W
UK
Australia
Japan
cm3/Kilogram
Inches/Pounds
44.5 (Height) X 35.1 (Width) X 26.4 (Depth),
10.4 Kilogram
Dimensions/Weight
17.5 (Height) X 13.8 (Width) X 10.4 (Depth),
23 Lbs
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KXB10 SIGNAL FLOW DIAGRAM
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KXB10
19 November 2009
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Kustom Amplification, Inc.
3015 Kustom Drive
Hebron, Kentucky
USA 41048
888-4-KUSTOM (888-458-7866)
All specifications are subject to change without prior notice. ©2010 Kustom
Download from Www.Somanuals.com. All Manuals Search And Download.
|