OWNER’S MANUAL
KG100FX212 GUITAR AMPLIFIER
Congratulations on the purchase of your new Kustom guitar amplifier.
Your KG Model draws on decades of amp design and manufacturing
experience at Kustom. This model was built from the ground up to offer
world-class tone, useful features and reliable performance. Inside this manual,
you’ll find valuable information about the amp’s controls and specifications.
Being familiar with its features will help you effectively dial in different tones.
We wish you many years of enjoyment with your Kustom amplifier.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLISH
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
FRENCH
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KG100FX212 Control Panel
1
2
3
4
5
6
7
8
9
10 11 12
13 14
15
1. Input 1: ¼-inch input jack that is intended for electric guitars but will accept other instruments as well. This input
provides the highest gain. It is considered to be the “normal” input.
2. Input 2: This ¼-inch input jack provides 6 dB lower gain so it will allow for a cleaner sound. It can also be useful when
using pedals in front of the amp since it provides more headroom. If guitars are plugged into both inputs, they will mix
together and both will be 6 dB lower in gain.
3. Gain (Lead): Adjust this control clockwise to increase the amount of distortion. Use in its lower ranges to produce less
distorted tones. As you increase the amount of gain, the tonality will shift from a classic rock-type sound to a heavier,
modern tone.
4. Volume (Lead): This controls the overall volume level of the Lead channel only.
5. Channel: This switch selects between the Lead and Rhythm channels.
6. Volume (Rhythm): This controls the overall volume level of the Rhythm channel only.
7. Bass: This controls the bass frequencies for both channels. For a “tighter” bass response, set the Bass control in its
lower ranges.
8. Middle: This controls the middle frequencies for both channels. For a heavier, more distorted sound, set the Middle
control in its lower ranges. For a vintage-style, cleaner tone, set the Middle higher.
9. Treble: This controls the treble frequencies for both channels. Set this control in its higher ranges to brighten up dark-
sounding guitars or, alternately, in its lower ranges to reduce brightness.
10. Reverb/Delay: This switch selects between Delay or Reverb effects. Press switch in to choose Delay.
11. Effects Level: This control increases the effect signal level and mixes it with the instrument’s signal. Turn this control
clockwise to add the desired level of effects.
12. Chorus On: By pressing in, this switch activates a lush Chorus effect.
13. Aux In: This is a 3-conductor, 1/8-inch, stereo jack that allows playback from a Compact Disc, MP3 player or other
audio device. The overall volume level will be determined by the audio device, so start with lower volume levels and
increase as needed.
14. Headphones: This is a 3-conductor, 1/8-inch input jack intended for headphone use. The amplifier’s internal
speakers are disconnected when this jack is used.
15. Power Switch: This dual-function component is both an On/Off power switch and a status indicator light. When
illuminated, it shows that your amplifier is ready to be played. To turn amplifier on, press switch upward. To turn amp off,
press switch downward.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KG100FX212 Back Panel
External Speaker: This is a two-conductor, ¼-inch external speaker jack. (Note: This jack is wired in series with the
amp’s internal speakers. Therefore, the internal speakers still function when an external speaker cabinet is added. For
this reason, there is no minimum external speaker impedance load.)
Footswitch: This amplifier provides foot-switchable channels and a “hidden” volume boost feature that works on either
channel to help make solos stand out in the mix. These features may be accessed in the following ways:
1) By connecting a single-function footswitch with a stereo cable to the Footswitch jack on the amplifier’s back panel,
users may change channels on the amp while playing. The boost feature will not be active. If a single-function footswitch
is used with a mono cable, such as a guitar cable, users may still change channels on the amp while playing, but the
boost feature will always be active. Kustom offers the model KACFS-100 single-function footswitch which comes with a
stereo cable. It may be ordered from a Kustom dealer.
2) By connecting a dual-function footswitch, both channel-switching and the boost feature may be activated. The
Kustom KACFS201 dual-function footswitch will switch channels and activate the boost function. It may be ordered from
a Kustom dealer.
Note 1: On the KACFS201 footswitch, channel-switching is labeled “Channel” and boost is labeled “Effect.”
Note 2: When no footswitch is attached to the amplifier, the “hidden boost” feature is not active.
Effects Loop Send: Use this 2-conductor, ¼-inch jack to connect to the input of an external effects processor or
equalizer. This jack can also be used as a Preamp Out.
Effects Loop Return: Use this 2-conductor, ¼-inch jack to connect to the output of an external effects processor or
equalizer. This jack can also be used as a Power Amp In. (Note: This jack separates the preamp from the power amp. If
using an external effect, the effect will be in series between the Effects Loop Send and Effects Loop Return. The amount
of “dry” signal will be controlled by the external effect.)
KG100FX212 AC Mains
1. AC Power Cord Receptacle: AC power cord can be removed for easy
storage and replacement if damaged. Insert the AC cord (provided) firmly into
the AC receptacle. NOTE: Replace the AC power cord if protective jacket is
damaged or ground pin is damaged or removed.
2. Fuse: The fuse is located in a fuse tray just below the receptacle. Replace
only with the same type and size. For your convenience, a spare fuse is located
inside the fuse tray toward the front. To replace fuse, remove AC power cord.
Remove fuse tray by pulling the tab located above the fuse symbol away from
the receptacle.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KG100FX212 Suggested Settings
The following suggested settings will help you dial in a variety of popular tones. Keep in mind, these are starting points to
get you up and running with your KG amplifier. Feel free to experiment to achieve your own signature sounds.
CLEAN GUITAR
These settings are for punchy clean tones that are commonly used in Pop, Country, Alternative and many other genres
of music. Use the Rhythm channel with the tone controls set to emphasize brighter sounds. The Bass control should be
adjusted to maintain the clarity of the overall tone. Add Reverb and Chorus as desired.
MEDIUM-GAIN GUITAR
These settings are appropriate for Rock, Blues or other music styles that require a moderate amount of distortion. Use
the Lead channel with the Gain set to its middle ranges. Likewise, keep the Mid control in its middle ranges but increase
the amount of Treble to maintain clarity.
HIGH-GAIN GUITAR
Try these setting ranges when you want to produce the heaviest tones. Notice that the Gain control is cranked up, the
amount of Bass is increased and Midrange is reduced for a heavy, modern vibe. Experiment by adding a bit of Delay to
high-gain solos.
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Kustom® KG100FX212 Specifications
100 Watts RMS
Output Power
Speaker
4 Ohms at 5% THD
2 x 12”
470K
60 watt 8 Ohm Special Design
Input Impedance
Hum & Noise
Lead Gain
-56dB
Residual noise, all level controls 0%
(minimum)
96 dB
70 dB
60 dB
45 dB
75 dB
Lead Gain and Volume controls full
Lead Gain and Volume controls half way
Clean volume control full
Clean Gain
Clean volume control halfway
Volumes and Gain halfway
Nominal Signal to Noise
Kustom KACFS-100 /
KACFS-201
Footswitch
See Footswitch text in
Back Panel description
4 selectable digital effects
Effects
Reverb, Delay, Chorus/Reverb, Chorus/
Delay
USA/Canada
Europe
Power Requirements
120VAC/60Hz, 180W
230VAC/50Hz, 180W
230VAC/50Hz, 180W
240VAC/50Hz, 180W
100VAC/50-60Hz, 180W
UK
Australia
Japan
mm/Kilogram
505 (Height) X 666 (Width) X 277 (Depth),
20 Kilogram
Dimensions/Weight
Inches/Pounds
19.8 (Height) X 26.2 (Width) X 10.9 (Depth),
44.1 Lbs
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KG100FX212 Signal Flow Diagram
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
KG100FX212
12 February 2010
kustom.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Kustom Amplification, Inc.
3015 Kustom Drive
Hebron, Kentucky
USA 41048
888-4-KUSTOM (888-458-7866)
All specifications are subject to change without prior notice. ©2010 Kustom
Download from Www.Somanuals.com. All Manuals Search And Download.
|