Kramer Electronics Digital Photo Frame T6F 23 User Manual

The Kramer T6F-23 inner frame  
Mounting the Inserts  
Congratulations on purchasing your Kramer T6F-23 inner frame for the TBUS-6xl Table  
Go to http://www.kramerelectronics.com to check for up-to-date  
Connection bus.  
user manuals and the complete list of Kramer wall plates and  
module connectors.  
i
The T6F-23 inner frame includes:  
You can rearrange or remove any of the plates mounted on the inner frame and replace them  
2 openings for 2 power sockets  
2 blank inserts  
1 pass-through opening  
with Kramer passive wall plates or connector modules for interfacing A/V type signals.  
To mount a Kramer insert or connector module:  
1. Unscrew the two screws that fasten the blank plate to the inner frame and remove the  
blank plate.  
2. Place the required Kramer insert over the opening, insert the two screws to fix the Kramer  
insert in place, and tighten them.  
Installing the Assembled Inner Frame  
To install the T6F-23 inner frame:  
1. Place the assembled inner frame inside the TBUS-6xl enclosure.  
Figure 1: T6F-23 inner frame (P/N: 80-004499)  
2. Set the required height using your fingers to bring the inner frame to the desired position,  
screw and tighten it in place using the height adjustment screws supplied with the inner  
frame.  
Power Socket and Power Cord Options  
Various power sockets and power cords are available to use with the T6F-23, as described in the  
“TBUS Modular Power Socket Installation and Power Cord” Installation Instructions, supplied with  
the power socket.  
Connecting the Cables  
When replacing blank inserts with connector inserts (for example, VGA, audio, HDMI and so on):  
1. Insert the cables to their appropriate connectors from underneath.  
Each power socket comes with detailed assembly instructions.  
i
2. Secure the cables to the tie holes on the TBUS-6xl.  
Do not secure the cables too tightly or too loosely. Leave a small amount of slack.  
The T-2INSERT Kit Option (80-00006699)  
After the TBUS-6xl is connected to mains power and the proper cables, it is ready for use.  
You can install the T-2INSERT kit (which includes 1 pass-through insert and a blank insert)  
instead of a power socket.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 

Infinity Speaker TSS SAT1200 User Manual
JBL MP3 Docking Station Stage III User Manual
JBL Speaker PRX710 User Manual
Jensen Digital Camera KT7009A User Manual
JL Audio Car Speaker SB T SEQ 10W3 User Manual
JVC CD Player XL R2010BK User Manual
Kawai Musical Instrument XD 5 User Manual
Keys Fitness Home Gym KPS HC User Manual
Kobe Range Hoods Ventilation Hood CH0130SQB User Manual
Kramer Electronics TV Converter Box FC 14 User Manual