Korg Musical Instrument Amplifier AX5B User Manual

EasyStart  
AX5G  
AX5B  
¾ A great collection of accurately-crafted Guitar  
Amp/Cabinet modeling and Effects using  
Korg’s award-winning “REMS” modeling  
technology  
¾ For the Electric Bass: Superbly crafted Amp,  
Cabinet and Effects using Korg’s REMS  
¾ 16 of the most coveted Drive/Amp models,  
mix and match with 10 killer cabinets  
¾ Dedicated Expression pedal to control volume,  
wah, and various effect parameters in real  
time  
¾ 16 of the most coveted Drive/Amp models;  
mix and match with 10 killer cabinets  
¾ Dedicated Expression pedal to control volume,  
wah, and various effect parameters in real  
time  
¾ Quick Assign function lets you easily assign  
an effect parameter to the expression pedal  
with one touch  
¾ Quick Assign function lets you easily assign  
an effect parameter to the expression pedal  
with one touch  
¾ 31 effects including 11 Pre-FX: (10 pre-  
effect+pedal-wah) Comp, Wah, Fretless and  
Synth. 10 Modulation, Filter and Pitch effects.  
10 Delay/Reverb effects plus a professional  
noise reduction effect  
¾ 31 effects divided into 3 FX blocks w/ an  
adjustable professional noise reduction effect.  
11 Pre FX: (10 pre-effect+pedal-wah) Comp,  
Wah, Acoustic, Drone, P/U and more. 10  
Modulation, Filter and Pitch effects. 10  
Delay/Reverb effects  
¾ 80 Programs: 40 presets and 40 user  
¾ 58 total effect types, 6 FX can be used  
simultaneously (3 effects blocks, Noise  
Reduction, Drive/Amp and Cabinet modeling)  
¾ Intuitive interface for quick and easy  
operation  
¾ 80 Programs: 40 presets and 40 user  
¾ 58 total effect types, 6 FX can be used  
simultaneously. (3 effects blocks, Noise  
Reduction, Drive/Amp and Cabinet modeling)  
¾ Intuitive interface for quick and easy  
operation  
¾ Function and Value knobs allow easy access  
to effect parameters and other features  
¾ Program select foot switches with large LED  
indicators for visibility  
¾ Delay and Reverb Effects carry over when  
changing between programs with the same  
settings  
¾ Battery or AC-powered  
¾ Auto-chromatic tuner w/mute function  
¾ Output jack also powers headphones  
¾ Program select foot switches with large LED  
indicators for excellent visibility  
¾ Battery or AC-powered  
¾ Auto-chromatic tuner w/mute function  
¾ Output jack also powers headphones  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AX3-Series EasyStart  
Note:  
The effect chart printed on the face of your AX5G and B will be indispensable in locating and identifying the various  
available effect choices. There is also a more detailed chart in the back of the included manual.  
3.  
4.  
Use the Value Knob to adjust the FX’s main parameter.  
To fine tune the sub-parameters (not applicable to LEVEL, NR, CAB, MIC & BODY, TONE, and NOTCH), set the Function Knob to the  
corresponding effect type “PARAM” position (the next position moving clockwise on the knob). Choose the desired parameter with the  
Write (“UP”) & Cancel (“DOWN”) Buttons and use the Value Knob to adjust the parameter value.  
Note:  
Tip:  
A list of effect parameters can be found in the aforementioned effect chart in the rear of the manual. This will be  
very helpful in determining which parameter is being adjusted.  
The Original Value Indicator (small dot in the lower right corner of the Program/Value Display) can be used to  
indicate the saved effect parameter settings of the currently selected program. Simply put, when the Original Value  
Indicator is lit, the previously saved effect parameter setting has been selected.  
Example (all AX5 models)  
1.  
2.  
Select MOD with the Function Knob.  
Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “F2” (CL Flange). Then use the Value Knob to adjust the CL Flange  
effect’s Main parameter (SPEED).  
3.  
Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2”  
(DEPTH). Use the Value Knob to adjust the level of the DEPTH parameter.  
Note:  
In this mode, if you press the Program Up (Value) switch, the current parameter value will be displayed. If you  
press the Program Down (Type/Param) switch, it will display to the currently selected FX type/parameter.  
Saving a Program  
You’ve tweaked and turned some knobs, and you like the changes that you’ve made – now to save your program:  
1.  
Set the Function Knob to the “WRITE” position, and press WRITE (“UP”) Button. A User program number will blink in the  
Program/Value Display.  
2.  
3.  
Use the Program Up and Down Switches or Value Knob to select the destination program number (1 - 40)  
Press the WRITE (“UP”) Button once again, and your program will be stored in the specified location (“CP” will display briefly indicating  
the process is complete).  
Amp/Line Setting (AX5G only)  
The AX5G’s output may be optimized to suit specific monitoring sources via the Amp/Line setting. Amp/Line settings can be  
made under the P5 parameter of the Drive/Amp (Note; the amp line setting is only applicable to Amp models {i.e. A0, A1,  
A2, A3, etc.} and will not be found on Drive models {i.e. D0, D1, D2, D3, etc.}). Select “A1” if you connect the AX5’s output  
to the input of a clean-sounding open back combo. Select “A2” if you connect the AX5’s output to the input of an open back  
combo with stronger mid-range content. Select “A3” if you connect the AX5’s output into a sealed back cabinet such as an  
amp stack. Select “Ln” if you connect the AX5’s output into a line input such as a mixer, recorder, headphones or any other  
full range monitoring source.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
AX5-Series EasyStart  
Quick Assign - Assigning a specific effect parameter to the Expression Pedal  
The AX5’s expression pedal can be set to control volume, wah, and many effects parameter like the speed of the  
tremolo or depth of a reverb. Assigning an effect parameter to the expression pedal using the quick assign  
feature is easy:  
1.  
2.  
First choose an effect type by turning the Function Selector to the appropriate effect section. Let’s choose Delay/REV.  
Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select an effect. In this case, let’s go with F4 (PP delay).  
3.  
Turn the Function Knob clockwise one position to PARAM. Use the Write (“UP”) & Cancel (“DOWN”) Buttons to select “P2”  
(Feedback).  
Note:  
You should notice that the Program Down Switch led is blinking. This is the indication that you can assign this  
particular parameter (Feedback) to the expression pedal. You can’t use the expression pedal to control a parameter  
for which the Program Up or Program Down switches do not blink.  
4. Hold down the Assign button for about 1 second. The display will read “CP”. You have now successfully assigned the Feedback of the PP  
Delay to the expression pedal.  
Assigning the Expression Pedal to Volume, Wah, or FX Param  
To switch the expression pedal between control of Volume, Wah, or FX Param, just press the pedal setting switch (Assign  
button) to scroll though the 3 choices: Volume, Wah, and FX PARAM.  
Note:  
Each time you press this button the control target will change in this order. Vol, Wah, FX PARAM.  
The LED will light as follows:  
Orange for Volume  
Red for Wah  
Green for FX PARAM  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intellinet Network Solutions Network Router 525312 User Manual
JBL Speaker GT4 User Manual
Jonsered Lawn Mower LM2146 CD User Manual
Jwin MP3 Player JL 334 User Manual
Kenmore Washer 134966700 User Manual
Kenwood Marine Radio TK 2202L User Manual
King Canada Sander KC 6108 OSC User Manual
KitchenAid Blender 4KFP750ER1 User Manual
KitchenAid Ice Maker KUIC15PRTS1 User Manual
Klipsch Portable Speaker La Scala II User Manual