E
INSTRUCTION MANUAL
9222-2799-11 PR-A212/ME0302
Download from Www.Somanuals.com. All Manuals Search And Download.
FOR PROPER AND SAFE USE
Read and understand all warnings and cautions before using this product.
WARNING
Using batteries improperly can cause them to leak harmful solutions, overheat, or explode which may
damage property or cause personal injury. Do not ignore the following warnings.
• Only use the batteries specified in this instruction manual.
• Do not install the batteries with the polarity (+/–) reversed.
• Do not use batteries which show wear or damage.
• Do not expose batteries to fire, high temperatures, water, or moisture.
• Do not attempt to short or disassemble batteries.
• Do not store batteries near or in metallic products.
• Do not mix batteries of different types, brands, ages, or charge levels.
• Do not charge alkaline batteries.
• When recharging rechargeable batteries, only use the recommended charger.
• Do not use leaking batteries. If fluid from the batteries enters your eye, immediately rinse the eye with
plenty of fresh water and contact a doctor. If fluid from the batteries makes contact with your skin or
clothing, wash the area thoroughly with water.
• Tape over battery contacts to avoid short-circuiting during disposal; always follow local regulations for
battery disposal.
• Use only the specified AC adapter within the voltage range indicated on the adapter unit. An inappropriate
adapter or current may cause damage or injury through fire or electric shock.
• Do not disassemble this product. Electric shock may cause injury if a high voltage circuit inside the
product is touched.
• Immediately remove the batteries or unplug the AC adapter and discontinue use if the camera is dropped
or subjected to an impact in which the interior, especially the flash unit, is exposed. The flash has a high
voltage circuit which may cause an electric shock resulting in injury. The continued use of a damaged
product or part may cause injuries or fire.
• Keep batteries or small parts that could be swallowed away from infants. Contact a doctor immediately if
an object is swallowed.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• Store this product out of reach of children. Be careful when around children not to harm them with the
product or parts.
• Do not fire the flash directly into the eyes. It may damage eyesight.
• Do not fire the flash at vehicle operators. It may cause a distraction or temporary blindness which may
lead to an accident.
• Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident.
• Do not look directly at the sun or strong light sources through the viewfinder. It may damage your eyesight
or cause blindness.
• Do not use this product in a humid environment, or operate this product with wet hands. If liquid enters
the product, immediately remove the batteries or unplug the AC adapter and discontinue use. The
continued use of a product exposed to liquids may cause damage or injury through fire or electric shock.
• Do not use the product near inflammable gases or liquids such as gasoline, benzine, or paint thinner. Do
not use inflammable products such as alcohol, benzine, or paint thinner to clean the product. The use of
inflammable cleaners and solvents may cause an explosion or fire.
• When unplugging the AC adapter, do not pull on the power cord. Hold the adapter unit when removing it
from an outlet.
• Do not damage, twist, modify, heat, or place heavy objects on the AC adapter cord. A damaged cord may
cause damage or injury through fire or electric shock.
• If the product emits a strange odor, heat, or smoke, discontinue use. Immediately remove the batteries
taking care not to burn yourself as the batteries become hot with use. The continued use of a damaged
product or part may cause injuries or fire.
• Take the product to a Minolta Service Facility when repairs are required
CAUTION
• Do not use or store the product in a hot or humid environment such as the glove compartment or trunk of
a car. It may damage the product and batteries which may result in burns or injuries caused by heat, fire,
explosion, or leaking battery fluid.
• If batteries are leaking, discontinue use of the product.
4
FOR PROPER AND SAFE USE
Download from Www.Somanuals.com. All Manuals Search And Download.
• The camera temperature rises with extended periods of use. Care should be taken to avoid burns.
• Burns may result if the memory card or batteries are removed immediately after extended periods of use.
Turn the camera off and wait for it to cool.
• Do not fire the flash while it is in contact with people or objects. The flash unit discharges a large amount
of energy which may cause burns.
• Do not apply pressure to the LCD monitor. A damaged monitor may cause injury, and the liquid from the
monitor may cause inflammation. If liquid from the monitor makes contact with skin, wash the area with
fresh water. If liquid from the monitor comes in contact with the eyes, immediately rinse the eyes with
plenty of water and contact a doctor.
• When using the AC adapter, insert the plug securely into the electrical outlet.
• Do not use if the AC adapter cord is damaged.
• Do not cover the AC adapter. A fire may result.
• Do not obstruct access to the AC adapter; this can hinder the unplugging of the unit in emergencies.
• Unplug the AC adapter when cleaning or when the product is not in use.
The following marks may be found on the product:
This mark on your camera certifies that this camera meets the requirements of the
EU (European Union) concerning interference causing equipment regulations. CE
stands for Conformité Européenne (European Conformity).
This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Digital Camera:
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
Do not remove the ferrite cores from the cables.
Tested by the Minolta Corporation
101 Williams Drive, Ramsey, New Jersey 07446, U.S.A.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
The basic operation of this camera is covered between pages 15 and 42. This section of the manual
covers the camera parts, preparation of the camera for use, and the basic camera operation for
recording, viewing, and deleting images.
The basic and advanced auto-recording mode sections cover all the basic functions of the camera in
this mode and in the multi-function recording mode. Take time to read these sections before moving
on to the multi-function recording mode section. The basic playback section describes how to view
images. The other sections can be read as needed.
Many of the features of this camera are controlled with menus. The menu navigation sections
concisely describe how to change menu settings. Descriptions of the settings immediately follow the
navigation sections.
Throughout the text are shooting tips and camera notes. Shooting tips give advice and information on
photography and how to use the camera to achieve the best results. Camera notes cover details on
camera operation.
Names of parts.....................................................................................................................................10
Camera body...........................................................................................................................10
Viewfinder................................................................................................................................12
Mode dial.................................................................................................................................12
Data panel ...............................................................................................................................13
LCD monitor display ................................................................................................................14
Getting up and running.........................................................................................................................15
Attaching the neck strap and lens cap ....................................................................................15
Changing batteries ..................................................................................................................16
Battery condition indicator.......................................................................................................17
Auto power save......................................................................................................................17
External power supplies (sold separately)...............................................................................18
Changing the CompactFlash card...........................................................................................18
Setting the date and time ........................................................................................................20
Auto-recording mode - basic operation................................................................................................22
Setting the camera to record images automatically ................................................................23
Handling the camera ...............................................................................................................24
Using the zoom lens................................................................................................................24
TABLE OF CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Basic recording operation........................................................................................................25
Focus lock................................................................................................................................26
Focus range.............................................................................................................................26
Focus signals...........................................................................................................................27
Special focusing situations ......................................................................................................27
Digital-subject-program button.................................................................................................28
Flash modes............................................................................................................................30
Flash range - auto-recording mode.........................................................................................31
Flash signals............................................................................................................................31
Camera-shake warning ...........................................................................................................31
Drive modes ............................................................................................................................32
Self-timer .................................................................................................................................33
Remote control (sold separately) ............................................................................................34
Continuous advance................................................................................................................35
Bracketing................................................................................................................................36
Display button - recording mode .............................................................................................37
Playback - basic operation ...................................................................................................................38
Single-frame playback and histogram display .........................................................................38
Viewing and deleting images...................................................................................................39
Display button - playback.........................................................................................................40
Enlarged playback ...................................................................................................................41
Auto-recording mode - advanced operation.........................................................................................42
Navigating the auto-recording mode menu .............................................................................42
Image size and image quality..................................................................................................44
Voice memo.............................................................................................................................46
Date imprinting ........................................................................................................................47
Digital zoom.............................................................................................................................48
Instant playback.......................................................................................................................49
Exposure compensation..........................................................................................................50
What is an Ev? What is a stop? ..............................................................................................51
Multi-function recording mode..............................................................................................................52
Autofocus areas and control....................................................................................................52
Navigating the multi-function recording mode menu...............................................................54
Exposure modes......................................................................................................................56
Program..............................................................................................................................56
Aperture priority - A............................................................................................................56
Manual exposure - M..........................................................................................................57
Bulb exposures........................................................................................................................58
Focus modes ...........................................................................................................................59
White balance..........................................................................................................................60
Automatic white balance.....................................................................................................60
Preset white balance..........................................................................................................60
Custom white balance........................................................................................................61
Camera sensitivity - ISO..........................................................................................................62
Flash range and camera sensitivity.........................................................................................62
Full-time AF .............................................................................................................................63
Metering modes.......................................................................................................................63
Exposure bracketing increment...............................................................................................64
Color mode..............................................................................................................................64
Image control - sharpness, contrast, & filter............................................................................65
7
Download from Www.Somanuals.com. All Manuals Search And Download.
A short guide to photography...............................................................................................................66
Movie recording....................................................................................................................................68
Notes on movie recording .......................................................................................................69
Recording movies with the IR Remote Control RC-3 (sold separately)..................................69
Playback mode - advanced operation..................................................................................................70
Playing back voice memos......................................................................................................70
Viewing movies........................................................................................................................71
Navigating the playback-mode menu ......................................................................................72
Frame-selection screen ...........................................................................................................74
Viewing images on a television ...............................................................................................75
Deleting files............................................................................................................................76
Locking files.............................................................................................................................77
Changing the index playback format .......................................................................................77
Slide Show...............................................................................................................................78
About DPOF ............................................................................................................................80
Creating a DPOF print order ...................................................................................................80
Ordering an index print............................................................................................................81
Canceling a DPOF print order.................................................................................................81
Copying images.......................................................................................................................82
Setup mode .......................................................................................................................................84
Navigating the setup menu......................................................................................................84
LCD monitor brightness...........................................................................................................86
Formatting CompactFlash cards .............................................................................................86
Auto power save......................................................................................................................86
Language.................................................................................................................................87
Display mode...........................................................................................................................87
File number (#) memory..........................................................................................................88
Folder name.............................................................................................................................88
Select folder.............................................................................................................................89
Audio signals ...........................................................................................................................89
Shutter FX ...............................................................................................................................89
Volume.....................................................................................................................................89
Resetting the camera ..............................................................................................................90
Date and time setting ..............................................................................................................91
Date format..............................................................................................................................91
Video output ............................................................................................................................91
TABLE OF CONTENTS
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Data-transfer mode...............................................................................................................................92
System requirements...............................................................................................................92
Connecting the camera to a computer....................................................................................93
Connecting to Windows 98 and 98 Second Edition ................................................................95
Automatic installation..........................................................................................................95
Manual installation..............................................................................................................96
CompactFlash card folder organization...................................................................................98
Disconnecting the camera from the computer ......................................................................100
Windows 98 and 98 Second Edition ................................................................................100
Windows Me, 2000 Professional, and XP ........................................................................100
Macintosh .........................................................................................................................101
Changing the CompactFlash card - data-transfer mode.......................................................102
Auto power save - data-transfer mode ..................................................................................102
QuickTime system requirements...........................................................................................103
Appendix
.....................................................................................................................................103
Troubleshooting .....................................................................................................................103
About Ni-MH batteries...........................................................................................................105
Removing the driver software - Windows..............................................................................106
Care and storage...................................................................................................................107
Technical specifications.........................................................................................................110
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA BODY
* This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces
clean. Please read the care and storage instructions in the back of this manual (p. 107).
Mode dial (main switch)
Shutter-release button
Digital-subject-program button (p. 28)
Data panel (p. 13)
Viewfinder window*
Microphone
Speaker
Flash (p. 30)
Strap eyelet (p. 15)
Remote-control
receiver
Self-timer/
Lens*
Remote-control
lamp (p. 33)
Battery-chamber door (p. 16)
Battery-chamber lock (p. 16)
NAMES OF PARTS
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash mode/Magnification button (p. 30, 41)
Drive-mode button (p. 32)
Exposure-compensation button (p. 50)
Viewfinder* (p. 12)
LCD monitor*
(p. 14)
Controller
Menu button
QV/ Delete button (p. 38)
Display button (p. 37, 40)
Access lamp
DC terminal cover (p. 18)
Card-slot door release Card-slot door (p. 18)
The USB port and AV-out terminal
are located behind the card-slot door.
Tripod socket
11
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWFINDER
Focus lamp (green)
Flash lamp (orange)
Focus frame
Because the optical viewfinder and the lens are slightly separated, the image seen through one is not
exactly the same as the other; this is called parallax. Parallax can cause errors in framing at close
distances and is more pronounced at longer focal lengths. When the subject is closer than 1m (3ft) at
the wide-angle lens position or 3m (10ft) at the telephoto lens position, use the LCD monitor to
compose the image; because the lens creates the monitor image, it does not suffer from parallax.
MODE DIAL
This dial gives direct and
Auto-recording mode (p. 22, 42)
easy access to the
camera’s major modes. It
Multi-function recording mode (p. 52)
also acts as the main
switch.
Playback mode (p. 38, 70)
Movie-recording mode (p. 68)
Setup mode (p. 84)
Data-transfer mode (p. 92)
NAMES OF PARTS
Download from Www.Somanuals.com. All Manuals Search And Download.
12
DATA PANEL
Digital-subject-program indicators (p. 28)
White-balance indicator (p. 60)
Manual-focus indicator (p. 59)
Camera-sensitivity indicator (p. 62)
Spot-metering indicator (p. 63)
Flash-mode indicators (p. 30)
Image-size display (p. 44)
Image-quality display (p. 44)
Drive-mode indicators (p. 32)
Microphone indicator (p. 46)
Battery-condition indicator (p. 17)
Exposure-compensation indicator (p. 50)
Exposure-mode indicators (p. 56)
The frame counter cannot exceed 999.
When the number of recordable
images exceeds this, 999 will be
displayed. The frame counter will
continue to count down when the
number of recordable images falls
below one thousand.
Digital-subject-program icons (p. 28)
Frame counter (p. 45)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD MONITOR DISPLAY
a.
b.
c.
d.
e.
f.
Voice memo indicator (p. 46)
Mode indicator (p. 12)
o.
p.
q.
r.
Manual-focus indicator (p. 59)
Focus signal (p. 27)
Flash-mode indicator (p. 30)
Sharpness display (p. 65)
Frame counter (p. 13)
Drive-mode indicator (p. 32)
Macro indicator (p. 28)
Contrast-compensation display (p. 65) s.
Filter display (p. 65) t.
Exposure-compensation display (p. 50) u.
Battery-condition indicator (p. 17)
Image-quality indicator (p. 44)
Image-size display (p. 44)
Color mode indicator (p. 48)
Digital-zoom display (p. 48)
g.
h.
i.
White-balance indicator (p. 60)
v.
w.
x.
Exposure-mode (p. 56)/
Digital-subject-program indicators (p. 28)
j.
Shutter-speed display
k.
l.
Metering-mode indicator (p. 63)
Aperture display
1.
2.
Focus frame (p. 25)
Spot metering area (p. 63)
AF sensors (p. 25)
m.
n.
Camera-shake warning (p. 31)
Camera-sensitivity (ISO) display (p. 62) 3.
Indicators and displays from both the auto-recording and multi-function recording modes have been
displayed for clarity.
NAMES OF PARTS
Download from Www.Somanuals.com. All Manuals Search And Download.
14
GETTING UP AND RUNNING
ATTACHING THE NECK STRAP AND LENS CAP
Attach the small strap to the lens cap by passing one of the small
loops through the eyelet on the cap (1) and then passing the other
loop through the first loop (2) and tightening.
2
1
Attach the camera strap to the strap eyelets as
shown. Make sure the neck strap passes through
the loop of the lens-cap strap. Always keep the
camera strap around your neck in the event that
3
you drop the camera.
4
Using your thumb and index finger,
pinch the outside tabs of the lens cap
to remove or attach. Always replace
the lens cap when the camera is not
in use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING BATTERIES
This digital camera uses four AA-size alkaline or Ni-MH batteries. Ni-MH batteries are recommended
because of longer life. When using Ni-MH batteries, fully recharge them with a battery charger
suitable for complex electronic equipment. Please consult your vendor about an appropriate charger.
When replacing batteries, the mode dial should be in the off
position. If the camera is not turned off when replacing
exhausted batteries, the low-battery warning may not reset.
3
Open the battery-chamber door by moving the battery-chamber lock (1)
to the open position. Slide the door forward (2) to release the safety
1
catch; the door should spring open (3).
2
Insert the batteries. Make sure the positive and negative battery
terminals are oriented as illustrated on the diagram in the battery
chamber.
5
Close the battery-chamber door and slide it back toward the body (4) to
engage the safety catch. Move the lock lever (5) to the close position.
After installing the batteries, the set-time/date message may appear on
the monitor. The clock and calendar are set in the custom 2 section of
the setup menu (p. 20).
4
GETTING UP AND RUNNING
Download from Www.Somanuals.com. All Manuals Search And Download.
16
BATTERY CONDITION INDICATOR
This camera is equipped with an automatic battery-condition indicator. When the camera is on, the
battery-condition indicator appears on the data panel and monitor. The monitor icon will change from
white to red when battery power is low. If the data panel and monitor are blank, the batteries may be
dead or installed incorrectly.
Full-battery Icon - the batteries are fully charged. This icon is displayed
for five seconds on the monitor when the camera is turned on. The icon
remains on the data panel.
Low-battery warning - battery power is very low. The batteries should
be replaced as soon as possible. This warning automatically appears
and remains on the monitor until the batteries are changed.
Blinking low-battery icon - when displayed on the data panel with no
other icons, power is insufficient for camera operation. The shutter will
not release. When replacing exhausted batteries, wait thirty seconds
between removing the old batteries and inserting the new ones.
When installing batteries, make sure the battery terminals are clean. Residue or dirt on the terminals
can sometimes cause a false low-battery warning. Always use a clean, dry cloth to clean batteries.
AUTO POWER SAVE
To conserve battery power, the camera will turn off displays and unnecessary functions if an
operation is not made within a certain period. The LCD monitor will turn off after thirty seconds. The
data panel turns off after one minute. To restore the displays, press any button or key, or turn the
mode dial to another position. The length of the auto-power-save period for the data panel can be
changed in the basic section of the setup menu (p. 84).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL POWER SUPPLIES (SOLD SEPARATELY)
The AC Adapter allows the camera to be powered from an electrical household outlet. The AC
Adapter is recommended when the camera is interfaced with a computer or during periods of heavy
use. AC Adapter model AC-1L is for use in North America, Japan, and Taiwan; AC-2L is for use in all
other areas.
The External High-power Battery Pack Kit EBP-100 is a portable source of power for the camera. The
kit contains a high-power lithium-ion battery, holder, and charger. The battery and charger are also
available separately. This battery pack will significantly extend the operating time of the camera.
Always turn off the camera before changing between
power supplies.
Remove the DC terminal cover from the left. The cover is
attached to the body to prevent loss.
Insert the mini plug of the AC adapter or battery pack into the
DC terminal. Always remove exhausted batteries before
connecting an external power supply. Wait thirty seconds
between removing the old batteries and plugging in the
external power source.
Insert the AC adapter plug into an electrical outlet.
CHANGING THE COMPACTFLASH CARD
A type I CompactFlash card must be inserted for the camera to operate. If a card has not been
inserted, a no-card warning will automatically be displayed on the monitor and three dashes (– – –)
will be displayed on the data-panel frame counter. For CompactFlash card care and storage, see
page 109.
GETTING UP AND RUNNING
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Always turn off the camera and confirm the access lamp is
not lit before inserting or removing a CompactFlash card,
otherwise the card may be damaged, and data lost.
1
2
3
4
Slide the card-slot door release down to open the card-slot door (1).
To eject a CompactFlash card, press the card-eject lever (2). The card can now be pulled out. Take
care when removing the card as it becomes hot with use.
Insert the memory card into the card slot until the card-eject lever pops out (3). Insert the card so the
face is toward the front of the camera. Always push the card in straight, never at an angle. Never
force the card. If the card does not fit, check that it is oriented correctly.
Close the card-slot door (4).
A card used in another camera may have to be formatted before being used. A card is formatted in
the basic section of the setup menu (p. 84); this operation permanently erases all data on the card. If
the unable-to-use-card message appears, the card is not compatible with the camera and cannot be
formatted.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE DATE AND TIME
After initially inserting a memory card and batteries, the camera’s clock and calendar must be set.
When images are recorded, the image data is saved with the date and time of recording. Depending
on the region, the menu language may also have to be set. To change the language, see the camera
notes on the following page.
Turn the mode dial on the top of the camera to the setup position. The camera
will turn on and the setup menu will be displayed.
Navigating the menu is simple. The up/down and left/right keys of the controller
move the cursor and change settings on the menu.
Pressing the center of the controller selects menu options and sets
adjustments.
Controller
Setup
Basic
Custom1
Custom2
LCDbrightness
Format
3
–
Power save
Language
1 min.
English
–
Display mode
GETTING UP AND RUNNING
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the right key to highlight the custom 2 tab at the
top of the menu.
Setup
Basic
Custom1
Custom2
Use the down key to highlight the date/time-set menu
option.
Reset default
Date/Time set
Date format
Video output
–
–
MM/DD/YYYY
NTSC
Press the right key. “Enter” will appear on the right
side of the menu.
Custom 2 section of the setup
menu
Press the center of the controller to display the
date/time setting screen.
Use the left and right keys to select the item to be
changed.
Setup
Date/Time set
4
.
20
.
2003
16 : 33
Use the up and down keys to adjust the item.
Enter
Press the center of the controller to set the clock
and calendar. The setup menu will be displayed.
Date/Time setting screen
Camera notes
For customers in certain areas, the menu language must also be set. Highlight the language
option in the basic section of the setup menu. Press the right key to display the language set-
tings. Using the up/down keys, highlight the desired language. Press the center of the controller
to set the highlighted language; the setup menu will be displayed in the selected language.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO-RECORDING MODE
BASIC OPERATION
This section covers the basic operation of this camera. Thoroughly familiarize yourself with the
operations in this section before moving on to the other sections in the manual.
The sophisticated technology employed in the auto-recording mode frees the photographer from
complicated camera settings to be able to simply concentrate on the subject and composition.
Although automated, the camera’s operation can be changed to meet various conditions as well as to
suit personal shooting preferences.
Minolta History
Innovation and creativity has always been a driving
force behind Minolta products. The Electro-zoom X
was purely an exercise in camera design. It was
unveiled at Photokina in Germany in 1966.
The Electro-zoom X was an electronically controlled
aperture-priority mechanical SLR with a built-in 30 -
120mm f/3.5 zoom lens giving twenty 12 X 17mm
images on a roll of 16mm film. The shutter-release
button and battery chamber are located in the grip.
Only a few prototypes were built making it one of
Minolta’s rarest cameras.
AUTO-RECORDING MODE - BASIC OPERATION
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CAMERA TO RECORD IMAGES AUTOMATICALLY
Turn the mode dial to automatic recording (1); all camera
operations are now fully automatic. The autofocus, exposure,
and imaging systems will work together to bring beautiful results
effortlessly.
While many of the camera’s systems in this mode are
automatic, the camera’s operation can be optimized to different
subjects very simply with the digital subject program button (p.
28). The flash mode (p. 30) and drive mode (p. 32) can also be
changed. Image size and quality can be set on the auto-
recording mode menu (p. 42).
1
Exposure mode
Metering mode
Camera sensitivity (ISO)
Flash mode
Program
Fixed
Multi-segment
Auto
Fixed
Fixed
Auto flash
Wide focus area
Autofocus
Single-frame advance
0.0
Can be changed*
Fixed
Focus area
Focus control
Fixed
Drive mode
Can be changed*
Can be adjusted*
Fixed
Exposure compensation
Color mode
Natural Color
Auto
White balance
Fixed
* Changes to the flash or drive mode will reset when the mode dial is turned to another position.
Adjustments made with exposure compensation will be reset to 0.0 when the camera is turned off or
changed to another mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
HANDLING THE CAMERA
While using the viewfinder or LCD monitor, grip the camera firmly
with your right hand while supporting the body with your left hand.
Keep your elbows at your side and your feet shoulder-width apart to
hold the camera steadily.
When taking vertical pictures, hold the camera so that the flash is
above the lens with the grip to the bottom. Take care not to cover
the lens with your fingers or the strap.
USING THE ZOOM LENS
This camera is equipped with a 7.15 to 28.6mm optical zoom. This is equivalent to a 35 - 140mm
zoom lens on a 35mm camera. In 35mm photography, focal lengths below 50mm are referred to as
wide-angle; the angle of view is larger than that of the human eye. Above 50mm is referred to as
telephoto and makes distant objects appear closer. The effect of the optical zoom is visible in both
the viewfinder and LCD monitor.
The zoom lens is operated by
the controller. Pressing the up
Controller
key (T) will zoom in to the
telephoto position of the lens.
Pressing the down key (W) will
zoom out to the wide-angle
position.
AUTO-RECORDING MODE - BASIC OPERATION
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC RECORDING OPERATION
With the mode dial set to auto recording, the camera will be on and the LCD
monitor will activate.
Place the subject within the focus frame.
• The focus-lock function (p. 26) can be used with off-center subjects.
• The subject must be within the focus range of the lens: 0.5m - ∞
(wide-angle position), 0.9m - ∞ (telephoto position). For subjects
closer than 0.6m, use the macro function (p. 28).
• If the subject is closer than 1m at the wide-angle lens position or 3m
at the telephoto lens position, use the LCD monitor to frame the
subject.
Press the shutter-release button partway down (1) to lock the focus
and exposure.
1
• The focus signals (p. 27) on the monitor will confirm the focus. If the
focus signal is red, the camera was unable to focus on the subject.
Repeat the previous steps until the signal is white.
• When the focus is set, an AF sensor will briefly appear on the live
image to indicate the point of focus.
2
• The shutter speed and aperture value will change from white to black
indicating the exposure is locked.
Press the shutter-release button all the way down (2) to take the
picture.
• The access lamp will glow indicating image data is being written to the
CompactFlash card. Never remove a memory card while data is being
transferred.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS LOCK
The focus-lock function is used when the subject is off-center and outside the focus frame. Focus
lock may also be used when a special focusing situation prevents the camera from focusing on the
subject. This function is controlled with the shutter-release button.
Place the subject within the focus frame. Press and hold the
shutter-release button partway down.
• The focus signals will indicate that the focus is locked. The
shutter speed and aperture value will change from white to
black indicating the exposure is locked.
• When the focus is set, an AF sensor will briefly appear on the
live image to indicate the point of focus.
Without lifting your finger from the shutter-release button,
recompose the subject within the image area. Press the
shutter-release button all the way down to take the picture.
FOCUS RANGE
CCD plane
Wide-angle lens position
Telephoto lens position
Macro mode (p. 28)
0.5m - ∞ (1.6ft - ∞)
0.9m - ∞ (3ft - ∞)
0.16m - 0.6m (0.5ft - 2ft)
All distances are measured from the CCD.
AUTO-RECORDING MODE - BASIC OPERATION
26
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS SIGNALS
This digital camera has a quick, accurate autofocusing system. The focus icon in the lower right
corner of the LCD monitor and the green focus lamp next to the viewfinder indicate the focus status.
Focus icon: white
Focus locked.
Focus lamp: steady
Focus icon: red
Focus lamp: blinking
Cannot focus. The subject is too close or a special sit-
uation is preventing the AF system from focusing.
• The shutter can be released even if the camera cannot focus on the subject.
• When the AF system cannot focus, the focus is set to infinity. When the flash is in use, the focus is set
between 3.0 and 3.8m. In this case, focus lock can be used with an object at the same distance as the
main subject or the camera can be focused manually in the multi-function recording mode (p. 59).
SPECIAL FOCUSING SITUATIONS
The camera may not be able to focus in certain situations. If the autofocus system cannot focus on a
subject, the focus icon will turn red. In this situation the focus-lock function can be used to focus on
another object at the same distance as your main subject, and then the image can be recomposed to
take the picture.
The subject is too dark. The subject in the
focus frame is low in
Two subjects at
different distances
overlap in the focus
frame.
The subject is near a
very bright object or
area.
contrast.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL-SUBJECT-PROGRAM BUTTON
The digital-subject-program button (1) optimizes the
camera’s exposure, white-balance, and image-processing
systems for various conditions and subjects. Pressing the
subject-program button cycles through the modes: macro,
portrait, landscape, night portrait, text, macro & text, and
the original exposure mode. A pointer will indicate the
active subject program. The subject program will remain in
effect until it is changed or the mode dial is turned to
another position. Except for macro, digital subject
programs cannot be used in the multi-function recording
mode.
1
CCD plane
While subject programs optimize camera performance for
each shooting condition, some changes can be made to
camera settings. The flash mode (p. 30) can be changed and the exposure can be altered using the
exposure-compensation function (p. 50). In extreme lighting conditions, changes in exposure
compensation may not produce the intended results in the portrait, night portrait, or text modes. The
camera-shake warning (p. 31) may appear in macro, landscape, night portrait, or text modes.
MACRO - used for close-up photography between 16 and 60 cm (6 ~
24in.) from the CCD. When the macro mode is selected, the lens will
automatically zoom to the correct position. The zoom position cannot
be changed. The LCD monitor should be used to compose the
picture and will automatically activate if off. The viewfinder cannot be
used because of parallax. The flash is set to flash cancel (p. 30). Fill-
flash can be used, but can cause extreme overexposure and uneven
illumination.
This subject program can be used in the multi-function recording
mode. It will not reset if the position of the mode dial is changed.
AUTO-RECORDING MODE - BASIC OPERATION
28
Download from Www.Somanuals.com. All Manuals Search And Download.
PORTRAIT - optimized to reproduce soft skin tones and a slight
defocusing of the background. The flash mode can be changed (p. 30).
Most portraits look best at a telephoto setting; longer focal lengths do not
exaggerate facial features and the shallower depth of field softens the
background.
LANDSCAPE - optimized to produce sharp, colorful landscapes. The flash
mode is set to flash cancel. Fill-flash can be used (p. 30).
NIGHT PORTRAIT - for deep, subtle night scenes. When used with fill-
flash, the subject and background exposures are balanced. When taking
pictures of a landscape at night, use a tripod to eliminate blurring from
camera shake. To take portraits with night scenes, set the flash mode to
fill-flash (p. 30). Ask your subject not to move after the flash burst; the
shutter will still be open for the background exposure.
TEXT - for the crisp reproduction of black text or line art on white
backgrounds. The flash mode is set to flash cancel (p. 30). Fill-flash can
be used. Use a tripod to eliminate camera shake and ensure the sharpest
images.
MACRO & TEXT - for close-up images of text or line art between 16 -
60cm (6 ~ 24in.) from the CCD. Two pointers will indicate the combined
modes on the data panel and the macro and text indicators will be
displayed on the monitor. The use of a tripod is recommended. The flash
is set to flash cancel. Fill-flash can cause extreme overexposure and
uneven illumination.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
FLASH MODES
To set the flash mode, simply press the flash mode button (1) on
the back of the camera until the desired mode is displayed.
Autoflash - the flash fires automatically in low-light and backlit
conditions.
Fill-flash - the flash fires with each exposure regardless of the
amount of ambient light. Fill-flash can be used to reduce harsh
shadows caused by strong direct light or sunshine.
1
Flash cancel - the flash will not fire. Use flash
Autoflash
Fill-flash
cancel when flash photography is prohibited, natural
light is desired to illuminate the subject, or the
subject is beyond the flash range. The camera-
shake warning may appear when flash cancel is
selected (p. 31).
Flash cancel
Red-eye reduction - the flash fires twice before the
main flash burst to reduce red-eye; an effect caused
by light reflected from the retina. Use in low-light
conditions when taking photographs of people or
animals. The pre-flashes contract the pupils of the
subject’s eyes.
Autoflash with
red-eye reduction
Fill-flash with
red-eye reduction
AUTO-RECORDING MODE - BASIC OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
30
FLASH RANGE - AUTO-RECORDING MODE
The camera will automatically control the flash output. For well-exposed images, the subject must be
within the flash range. Because of the optical system, the flash range is not the same at the lens’
wide-angle position as it is at the telephoto position.
Wide-angle position
Telephoto position
0.5m ~ 3.5m (1.6 ft. ~ 11.5 ft.)
0.9m ~ 3.0m (3.0 ft. ~ 9.8 ft.)
At the wide-angle lens position, when using the flash with subjects closer than 1m (3ft.), vignetting
can occur. A slight shadow or shading may be apparent at the bottom of a horizontal image.
FLASH SIGNALS
The orange flash lamp next to the viewfinder indicates the
status of the flash. When the lamp glows steadily, the flash
is charged and ready to fire. When the lamps blinks
quickly, the flash is charging and the shutter will not
release. The flash lamp is also used as a camera-shake
warning, see below.
CAMERA-SHAKE WARNING
If the shutter speed falls below the point where the camera can be safely hand held, the camera-
shake warning will appear on the LCD monitor and the orange focus lamp will blink slowly. Camera
shake is slight blurring caused by subtle hand motion and is more pronounced at the telephoto
setting of the lens than at the wide-angle setting. Although the warning appears, the shutter can still
be released. If the warning appears, the following steps can be taken:
• Place the camera on a tripod.
• Use the built-in flash.
• Zoom the lens towards the wide-angle position until the warning disappears.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE MODES
The drive modes control the rate and method images are captured.
Icons indicating the selected drive mode appear on the data panel
and LCD monitor.
To change the drive mode, simply press the drive-mode button (1) on
the back of the camera until the desired mode is displayed.
1
All drive-mode indicators have
been shown for clarity. The single-
frame advance and continuous
drive indicators occupy the same
area of the data panel. All the
drive-mode icons appear in the
lower right corner of the monitor.
Data panel
LCD monitor
Single-frame
advance
To take a single image each time the shutter-release
button is pressed (p. 25).
Self-timer/ Remote
control
To delay the release of the shutter. Used for self-por-
traits.
Continuous
advance
To take multiple images when the shutter-release but-
ton is pressed and held.
To take a series of three images with
differing exposures.
Bracketing
AUTO-RECORDING MODE - BASIC OPERATION
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF-TIMER
Used for self-portraits, the self-timer will delay the release of the shutter for approximately ten
seconds after the shutter-release button is pressed. The self-timer is set with the drive-mode button
(p. 32).
With the camera on a tripod, compose the picture as described in the basic
1
recording operation section (p. 25). Focus lock ( 26) can be used with off-center
subjects. Press the shutter-release button partway down to lock the exposure and
focus (1). Press the shutter-release button all the way down to begin the
countdown (2). Because focus and exposure are determined when the shutter-
release button is pressed, do not stand in front of the camera when taking a self-
timer image. Always confirm the focus with the focus signals before beginning the
countdown (p. 27).
2
During the countdown, the self-timer lamp on the front of the camera (3) will start
to blink and is accompanied by an audio signal. A few
seconds before the exposure, the self-timer lamp will blink
rapidly. The lamp will glow steadily just before the shutter
fires. To stop the countdown, press the drive-mode button.
The self-timer is canceled after the exposure. The audio
signal can be turned off in the custom 1 section of the setup
menu (p. 84).
3
Shooting tips
The self-timer can be used to minimize camera shake with long exposures. When using the
camera on a tripod, photographs of static subjects (landscapes, still-lifes, or close-up pho-
tographs) can be made with the self-timer. Because no contact is made with the camera during
exposure, there is no risk of camera shake caused by the operator.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL (SOLD SEPARATELY)
The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away. The remote
control unit can be used in movie recording (p. 68).
Place the camera on a tripod, and set the drive mode
to self-timer / remote control (p. 32).
Arrange the camera and subject to compose the
picture. Frame the subject within the focus frame
when setting up the camera.
Focus lock cannot be used with the IR remote control.
In multi-function recording mode, focus area selection
can be used for off-center subjects (p. 52).
While pointing the emitter window of the remote control unit
Emitter window
toward the camera, press the release button or the delay
button to take the picture. When the release button is
pressed, the self-timer lamp on the front of the camera will
Delay button
blink once before the picture is taken. When the delay button
is pressed, the self-timer lamp on the front of the camera will
blink for two seconds before the picture is taken.
Release button
The drive mode does not reset after the exposure so multiply
images can be captured.
The remote control may not operate with backlit subjects or
under fluorescent light.
AUTO-RECORDING MODE - BASIC OPERATION
34
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTINUOUS ADVANCE
The continuous-advance drive mode allows a series of images to be captured while holding down the
shutter-release button. Continuous advance acts like a motor drive on a film camera. The number of
images that can be captured at one time and the rate of capture depend on the image-quality and
image-size setting. The maximum rate of capture is 1.6 fps. The continuous-advance mode is set with
the drive-mode button (p. 32).
When the shutter-release button is pressed and held, the camera will begin recording
images until the maximum number has been taken or the shutter button is released.
This mode cannot be used with TIFF images (p. 44). The built-in flash can be used,
but the rate of capture is reduced because the flash must recharge between frames.
1
Compose the picture as described in the basic recording operation section (p. 25).
Press the shutter-release button partway down (1) to lock the exposure and focus for
the series. Press and hold the shutter-release button all the way down (2) to begin
taking pictures.
2
The following chart lists the approximate maximum number of images that can be
captured with different image-quality and image-size
combinations.
Size
2272 X 1704 1600 X 1200 1280 X 960
640 X 480
Quality
6
9
10
16
24
15
23
31
33
43
53
Fine
Standard
Economy
14
35
Download from Www.Somanuals.com. All Manuals Search And Download.
BRACKETING
This drive mode makes a three-image bracket of a scene. Bracketing is a method of taking a series
of images of a static subject in which each image has a slight variation in exposure. The bracketing
mode is set with the drive-mode button (p. 32). Brackets cannot be made with TIFF images (p. 44).
The order of the bracket series is normal exposure (as indicated by the shutter
speed and aperture displays), underexposure, and overexposure. The
exposure bracket in auto-recording mode is set to 0.5 Ev
increments. In the multi-function recording mode the increment can
be set to 0.3, 0.5, or 1.0 Ev increments in the custom 1 section of
the menu (p. 54).
Normal
Under
Over
Compose the picture as described in the basic recording operation section (p. 25).
Press the shutter-release button partway down (1) to lock the exposure and focus for
the series. Press and hold the shutter-release button all the way down (2) to make
the bracket series; three consecutive images will be captured. If the memory card is
filled or the shutter button is released before the series has completed, the camera
will reset and the entire bracket must be made again. When using flash, there will be
a delay between frames as the flash charges. The remaining number of frames in
the bracket series is displayed on the monitor next to the bracketing icon.
1
2
Number of frames in
bracketing series
Frame counter
When using exposure compensation (p. 50), the bracketing
series will be made in relation to the compensated exposure.
Under extreme conditions, one of the bracketed exposures may
be inaccurate because it is outside the exposure control range of
the camera.
AUTO-RECORDING MODE - BASIC OPERATION
36
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY BUTTON - RECORDING MODE
The display button controls the LCD monitor display. The display cycles to the next position each time
the button is pressed: standard display, focus frame only, real-time histogram, live image only, and
monitor off. The number of screens and their formats can be changed in the basic section of the
setup menu (p. 84)
Battery power can be conserved by turning the monitor off and using the viewfinder to take pictures.
When the menu or exposure-compensation button is pressed, or the macro mode is activated, the
monitor will automatically turn on. Full-time AF (p. 63) and the digital zoom (p. 48) are disabled when
the monitor is off.
Standard display
Focus frame only
Real-time histogram
Live image only
LCD monitor off
Display button
The real-time histogram shows the approximate luminance distribution of the live image. The
histogram is not accurate when the monitor image is amplified in low-light conditions, or when the
camera is focusing. The histogram of the recorded image may not have the same distribution as the
real-time histogram.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK -
BASIC OPERATION
Images can be viewed in the Quick View or playback modes. This section covers the basic operations
in both modes. The playback mode has additional functions, see page 70.
To view images from the playback mode, turn the mode dial
to the playback position.
To view images from the auto-recording, multi-
function recording, or movie recording modes,
press the Quick View / delete button.
SINGLE-FRAME PLAYBACK AND HISTOGRAM DISPLAY
Image size (p. 44)
Mode
indicator
Image quality (p. 44)
Aperture value
Shutter speed
Time of
capture
White-balance
setting (p. 60)
Date of capture
Sensitivity
setting (p. 62)
Degree of exposure
compensation (p. 50)
Folder name (p. 88)
Voice-memo indicator (p. 70)
Lock indicator (p. 77)
Print indicator (p. 80)
Frame number/ total number of images
Folder number - image file number
Histogram
PLAYBACK - BASIC OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
38
To view the histogram of the displayed still image, press the up key. The histogram
shows the luminance distribution of the image from black (left) to white (right). The 224
vertical lines indicates the relative proportion of that light value in the image. The
histogram can be used to evaluate exposure, but displays no color information. To return
to single-frame playback, press the down key.
VIEWING AND DELETING IMAGES
In Quick View or the playback mode, use the left/right keys of the controller to scroll
through the images.
To return to the recording mode from Quick View, press the menu
button or shutter-release button partway down.
Controller
Menu button
Quick View / Delete button
The displayed image can be deleted. Once deleted, an image cannot be recovered.
To delete the displayed image, press the QV/delete
button. A confirmation screen will appear.
Delete this frame?
Yes
No
Use the left/right keys to highlight “Yes,” “No” will cancel
the operation.
Press the center of the controller to delete the image.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY BUTTON - PLAYBACK
The display button controls the display format. Each
time the button is pressed, the display cycles
through to the next format: full display, image only,
index playback.
Full display
Image only
Display button
Index playback
In index playback, the left/right keys of the controller will move the yellow border to the next or the
previous image. When the image is highlighted with the border, the date of recording, voice memo
indicator, the lock and printing status, and the frame number of the image are displayed at the bottom
of the screen. The highlighted image can be deleted using the QV/delete button (p. 39), or an
accompanying voice memo can be played by pressing the controller (p. 70). When the display
information button is pressed again, the highlighted image will be displayed in the single-frame
playback mode. A nine or four image index can be displayed. The index-playback format can be
changed in the basic section of the playback-mode menu (p. 72).
PLAYBACK - BASIC OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
40
ENLARGED PLAYBACK
In single-frame playback, a still image can be enlarged up to 3.5X in 0.2X increments for closer
examination. 640 X 480 size images can only be enlarged between 1.2X and 2.0X. The maximum
enlargement of 1024 X 768 digital zoom images is 3.2X. TIFF images cannot be enlarged.
With the image to be magnified displayed, press the
magnification button (1) to activate the enlarged playback
mode. The degree of magnification is displayed on the LCD
monitor.
1
Pressing the up key increases the image magnification.
Pressing the down key decreases the magnification.
The display button switches between showing the full
display and the image only.
Scroll
To scroll the image, press the center of the controller; the button
switches between the enlarged-playback and scroll screens.
Use the four-way keys of the controller to scroll the
image.
To exit the enlarged playback mode, press the magnification
button (1).
Zoom
41
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTO-RECORDING MODE -
ADVANCED OPERATION
NAVIGATING THE AUTO-RECORDING MODE MENU
In auto-recording mode, press the menu button (1) to activate the menu. The menu button also turns
off the menu after settings are made. The four-way keys of the controller (2) are used to move the
cursor in the menu. Pressing the center of the controller will enter a setting.
Use the up/down keys of the controller to scroll through the menu options. Highlight the option whose
setting needs to be changed. When scrolling in one direction, the cursor will jump between the top and
bottom of the menu.
With the menu option to be changed highlighted, press the right controller key; the settings will be
displayed with the current setting highlighted. To return to the menu options, press the left key.
Use the up/down keys to highlight the new
setting.
Press the center of the controller to
select the highlighted setting.
Auto
Basic
Once a setting has been selected,
the cursor will return to the menu
options and the new setting will be
displayed. Changes can continue to
be made. To return to the auto-
recording mode, press the menu
button.
Image size
Quality
2272 X1704
Standard
Off
2
1
Voice memo
Date imprint
Digital zoom
Inst.Playback
Off
Off
Off
Changes made on the auto-
recording mode menu will also affect
the multi-function recording mode.
AUTO-RECORDING MODE - ADVANCED OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
42
Settings made with the auto-recording menu will remain
in effect until changed or the camera is reset to its default
settings (p. 90).
Basic
Image size
2272 X 1704
1600 X 1200
1280 X 960
640 X 480
TIFF
Image size - To set the pixel resolution of the images.
Image size affects the size of the image file.
Image quality - To set the rate of compression of the
images. Image quality affects the size of the image file.
Quality
Fine
Voice memo - To record audio after a still image has
been captured. The function can be turned off and the
length of the recording can be set.
Standard
Economy
15 sec.
5 sec.
Voice memo
Date imprint - The date of recording can be imprinted on
each image. The date is set in the custom 2 section of
the setup menu (p. 20).
Off
Date imprinting
Digital zoom
Inst.Playback
On
Digital zoom - The digital zoom can be turned on or off.
Off
On
Instant playback - After taking a picture, the image will
be displayed on the monitor for two or ten seconds. The
displayed image can be deleted before being saved to
the CompactFlash card.
Off
10 sec.
2 sec.
Off
Read the following sections for more details on these
options and settings. All of these functions appear on the
multi-function recording mode menu (p. 54).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
IMAGE SIZE AND IMAGE QUALITY
Changing image size affects the number of
Number of pixels
(hor. X vert.)
Data panel
LCD monitor
pixels in each image. The greater the image
size, the larger the file size. Choose image
size based on the final use of the image -
smaller images will be more suitable for web
sites whereas larger sizes will produce
higher quality prints.
2272
1600
1280
640
2272 X 1704
1600 X 1200
1280 X 960
640 X 480
Image quality controls the rate of
compression, but has no effect on the number of pixels in the image. The higher the image quality,
the lower the rate of compression and the larger the file sizes. If economical use of the memory card
is important, use the economy mode. Standard image quality is sufficient for normal usage. The TIFF
mode will produce the highest quality image and the largest image files. A status bar is displayed
when large images are saved.
Data panel LCD monitor
File type
TIFF
TIFF - the highest quality image.
Fine - high-quality image.
TIFF
FINE
STD.
JPEG
JPEG
JPEG
Standard - the default setting.
Economy - the smallest file sizes.
ECON.
File formats vary with the image quality setting. The fine, standard, and economy settings are
formatted as a JPEG file. TIFF, fine, standard, and economy files can be recorded as color or
monochrome images (p. 64) in the multi-function recording mode.
Image size and quality must be set before the picture is taken. Changes are displayed on the data
panel and LCD monitor. Image size and quality must be reset manually. See navigating the auto-
recording mode menu section on page 42. In multi-function recording mode, image size and quality
are controlled in the basic section of the multi-function recording menu (p. 54).
AUTO-RECORDING MODE - ADVANCED OPERATION
44
Download from Www.Somanuals.com. All Manuals Search And Download.
If image size or quality are changed, the frame counter will display the approximate number of
images that can be recorded at that setting on the installed memory card. One memory card can
contain images with differing sizes and qualities. The number of images that can be stored on a
memory card is determined by the size of the card and the file size of the images. The actual file size
is determined by the scene; some subjects can be compressed further than others.
Approximate file sizes.
Size
2272 X 1704 1600 X 1200 1280 X 960 640 X 480
Quality
TIFF
Fine
Standard
Economy
12MB
2MB
1.2MB
750KB
5.7MB
1.0MB
650KB
430KB
3.7MB
720KB
460KB
330KB
1.0MB
320KB
240KB
190KB
Approximate number of images that can be stored on a 16MB memory card.
TIFF
Fine
Standard
Economy
1
6
11
17
2
3
13
34
42
48
12
19
27
17
26
33
Camera Notes
The frame counter indicates the approximate number of images that can be stored on the mem-
ory card at the camera’s image quality and size settings. If the settings are changed, the frame
counter adjusts accordingly. Because the counter uses approximate file sizes, the actual image
taken may not change the counter or may decrease it by more than one. When the frame
counter displays zero, it indicates no more images at the image size and quality settings can be
captured. Changing those settings may allow more images to be saved to the card.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VOICE MEMO
Voice memo allows a five or fifteen second audio track to be recorded with a still image. The function
is activated and the length of the recording time is set on the auto-recording mode menu (p. 42). In
multi-function recording mode, voice memo is controlled in the custom 2 section of the multi-function
recording menu (p. 54). When the function is active, the microphone icon is displayed on the data
panel and LCD monitor. The voice memo must be set before taking a picture. It will remain in effect
until reset.
After an image is captured, a screen will
appear indicating the audio recording has
3
started. A bar graph (1) will display the
Microphone
amount of recorded time remaining. The
recording will automatically stop when the
set time has elapsed. To cancel the
recording and erase the audio track, press
the down key of the controller (2) or the
shutter-release button (3) before the
recording has finished.
The voice memo is attached to the last
Auto
frame in a continuous-advance or
bracketing series (p. 32). The voice memo
Recording audio
can be played back in Quick View or in
1
: Stop
the playback mode (p. 70). Images with
voice-memo audio tracks have a note icon
displayed with them.
2
Recording Tips
When making audio recordings, be careful not to touch or cover the microphone. The quality of
the recording is proportional to the subject to microphone distance. For best results, hold the
camera approximately 20cm (8in) from your mouth.
AUTO-RECORDING MODE - ADVANCED OPERATION
46
Download from Www.Somanuals.com. All Manuals Search And Download.
DATE IMPRINTING
The date of recording can be printed directly on the image. The
imprinting function must be activated before the image is taken. Once
activated, the date will continue to be imprinted until the function is
reset; a yellow bar is displayed behind the frame counter on the
monitor to indicate date imprinting is active.
Date-imprinting indicator
Date imprinting is activated with a menu; see
navigating the auto-recording mode menu section on
page 42. In multi-function recording mode, date
imprinting is controlled in the custom 2 section of
the multi-function recording menu (p. 54).
The date is imprinted in the lower right corner of the
image when viewed horizontally. It is printed directly
on the photograph writing over the image
information. The date can be imprinted in three
formats: year/month/day, month/day/year, and
day/month/year. The date and date format are set in
the custom 2 section of the setup-mode menu (p.
84).
Camera Notes
Every time a still image is recorded, it is stored with an exif tag that contains the date and time
of recording as well as shooting information. This information can be viewed with the camera in
the playback or Quick View mode, or on a computer with the DiMAGE Viewer software.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
DIGITAL ZOOM
Assisting the optical zoom is a 2.2X digital zoom. The effect of the digital zoom doubles the power of
the telephoto position of the optical zoom giving the equivalent of a 308mm lens on a 35mm camera.
The effect is visible on the LCD monitor only. The digital-zoom is canceled if the LCD monitor is
turned off (p. 37). The digital zoom is activated in the auto-recording menu (p. 42). In the multi-
function recording mode, it is activated in the custom 1 section of the multi-function recording mode
menu (p. 54).
Controller
At the maximum telephoto position, press
the up key (T) to activate the digital zoom.
X2.2 will be displayed in the top right
corner of the monitor.
To cancel the digital zoom, press the down
key.
When an image is taken with the digital zoom, the final image size depends on the image-size setting
on the camera, see chart.
Image size setting
2272 X 1704 1600 X 1200
1280 X 960
640 X 480
640 X 480
Size of
recorded image
1024 X 768 1024 X 768
1024 X 768
AUTO-RECORDING MODE - ADVANCED OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
48
INSTANT PLAYBACK
After an image is captured, it can be displayed on the monitor before being saved. An index display is
used with the continuous-advance or bracketing drive modes (p. 32). When used with voice memo,
the audio recording begins after the image is played back.
Instant playback is activated with a menu; see navigating the auto-recording mode menu section on
page 42. Instant playback is also set in the custom 2 section of the multi-function recording menu (p.
54). There are three menu settings:
Instant playback is disabled.
Off
2 sec
10 sec
The captured image will be displayed for two or ten seconds. While dis-
played, the image can be deleted before being saved.
To store an image during playback.
To delete an image.
If the center of the controller is pressed during
the instant playback, the displayed image will
immediately be saved and the playback
canceled.
To delete an image during the instant
playback, press the QV/delete button
(1). A confirmation screen will appear.
Delete this frame?
Yes
No
Use the left/right keys of the controller
to highlight “YES.” “NO” will cancel the
operation.
Auto
Press the controller to delete the
image.
: delete
: store
1
49
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE COMPENSATION
The camera exposure can be adjusted to make the final picture lighter or darker by as much as 2Ev
in 1/3 increments. In auto-recording mode, exposure compensation is reset when the mode dial is
moved to another position. The exposure-compensation value will remain in effect until it has been
reset in the multi-function recording mode.
The exposure compensation must be set before the image is captured. When setting the exposure
compensation, the amount of compensation is shown next to the exposure-compensation indicator
on the monitor. After the setting is made, the shutter-speed and aperture displays will indicate the
actual exposure. Because the exposure can be adjusted in fine steps, the shutter speed or aperture
value displayed may not change. When set to any value other than 0.0, the exposure-compensation
indicator will remain on the data panel and LCD monitor as a warning.
1
To adjust the exposure, press the
exposure-compensation button (1). The
exposure compensation screen will
appear.
Use the left/right keys of the controller (2)
to adjust the exposure-compensation
value. Change in exposure compensation
2
is visible in the live image on the monitor.
adjust
set
Exposure-compensation indicator and value
AUTO-RECORDING MODE - ADVANCED OPERATION
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting tips
Sometimes the camera’s exposure meter is deceived by certain conditions. Exposure compen-
sation can be used in these situations. For example, a very bright scene, such as a snowy land-
scape or a white sandy beach, can appear too dark in the captured image. Before taking the
picture, adjusting the exposure by +1 or +2 EV will result in an image with normal tonal values.
Calculated camera
exposure
–1.0Ev
–2.0Ev
In the example above, the dark water caused the camera to overexpose the image making it
bright and washed-out. By compensating the exposure, detail is brought out in the leaves, and
the stones and water appear richer.
WHAT IS AN EV? WHAT IS A STOP?
Ev stands for exposure value. The term stop comes from the name of aperture plates used in early
lenses. A change of one Ev or one stop will adjust the exposure calculated by the camera by a factor
of two.
Change in Ev
+2.0 Ev
+1.0 Ev
0.0 Ev
Change in stops
+2 stops
Adjustment to exposure
4X as much light
+1 stop
2X as much light
Calculated exposure
–1.0 Ev
–1 stop
1/2 as much light
1/4 as much light
–2.0 Ev
–2 stops
51
Download from Www.Somanuals.com. All Manuals Search And Download.
MULTI-FUNCTION RECORDING MODE
Except for digital subject programs, the basic operation of the camera in multi-function recording
mode is identical to the auto-recording mode. Thoroughly familiarize yourself with the previous
sections before moving on.
The multi-function recording mode allows greater flexibility over image making. This recording mode
gives more control over autofocus and composition. The menu controls are extensive allowing critical
adjustments to image qualities such as color, sharpness, and contrast. Unlike the auto-recording
mode, settings made in multi-function recording are not reset when the position of the mode dial is
changed.
AUTOFOCUS AREAS AND CONTROL
In the multi-function recording mode, the controller selects the focus area used. The wide focus area
and focus area selection allow flexibility in a variety of situations.
The wide focus area is an array of local focus areas that work
together to control focus. This system is especially effective with
moving subjects or quick shooting in fast-moving events. When
focus locks, one of the AF sensors within the wide focus area will
briefly indicate the point of focus.
Switching between the wide focus area and the spot focus areas is simple. Press
and hold the controller until the wide-focus-area frame lines change to the spot-
focus-area display. Press and hold the controller again to return to the wide-focus-
area frame lines.
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
52
The focus area selection controls which spot focus area is active. This function can be used for off-
center subjects or to single out an individual subject from a group.
Press and hold the controller to display the spot focus areas; the
active area is blue. Use the four-way key of the controller to
highlight the desired autofocus area.
1
Press the shutter-release button partway down (1) or press the
center of the controller (2) to select the area; the other four areas
will disappear.
2
Once a spot focus area is selected, it will remain active even after the picture has been taken. Only
when one focus area is displayed, can the controller be used to zoom (p. 24) or adjust the exposure
(p. 56).
To select another focus area, press the center of the controller; all five areas should be displayed.
The controller can now be used to change the spot focus area. The selected focus area selection
remains in effect when the LCD monitor is turned off.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATING THE MULTI-FUNCTION RECORDING MODE MENU
In multi-function recording mode, press the menu button (1) to activate the menu. The menu button
also turns off the menu after making settings. The four-way keys of the controller (2) are used to
move the cursor in the menu. Pressing the center of the controller will enter a setting.
Activate the recording-mode menu with the menu button. The basic tab at the top of the menu will be
highlighted. Use the left/right keys of the controller to highlight the appropriate menu tab; the menus will
change as the tabs are highlighted.
When the desired menu section is displayed, use the up/down keys to scroll through the menu options.
Highlight the option whose setting needs to be changed. When scrolling in one direction, the cursor will
jump between the top and bottom of the menu.
With the menu option to be changed highlighted, press the right controller key; the settings will be
displayed with the current setting highlighted. To return to the menu options, press the left key.
Use the up/down keys to highlight the
new setting.
Press the controller to select the
highlighted setting.
Once a setting has been selected, the
cursor will return to the menu options
and the new setting will be displayed.
Changes can continue to be made. To
return to the recording mode, press the
menu button. Changes made to image
size, image quality, voice memo, date
imprint, digital zoom, and instant
playback will affect the auto-recording
mode.
Multi
Basic
Custom1
Custom2
Exposure mode
Image size
Quality
Program
2272 X 1704
Standard
Auto
2
1
White balance
Focus mode
Sensitivity
AF
Auto
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Basic
Custom 1
Exposure mode
Program
Aperture priority
Manual
Full-time AF
On / Off
Multi-segment
Spot
Metering mode
Image size
Quality
2272 X 1704
1600 X 1200
1280 X 960
640 X 480
TIFF
Exposure bracket
1.0 Ev
0.5 Ev
0.3 Ev
On / Off
10 sec.
2 sec.
Digital zoom
Instant playback
Fine
Standard
Economy
Cloudy
Off
Custom 2
Color mode
White balance
Vivid Color
Natural Color
B&W
Daylight
Auto
Tungsten
fluorescent
Custom
AF
Sepia
Solarization
Hard (+)
Normal
Soft (–)
High (+)
Normal
Low (–)
Warm (+)
Off
Sharpness
Contrast
Focus mode
Sensitivity
MF
ISO 400
ISO 200
ISO 100
ISO 64
Filter
Auto
Cool (–)
15 sec.
5 sec.
Refer to the auto-recording mode section for
details on image size (p. 44), image quality (p.
44), voice memo (p. 46), date imprinting (p. 47),
digital zoom (p. 49), and instant playback (p.
49).
Voice memo
Date imprinting
Off
On
Off
55
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE MODES
The three exposure modes allow extensive control over image making: program, aperture priority,
and manual exposure. Exposure modes are set in the basic section of the multi-function recording
mode menu (p. 54).
Program
The program exposure mode controls both the shutter speed and aperture to ensure perfect
exposures. The sophisticated exposure system allows the photographer the freedom to shoot without
having to worry about the technical details of exposure settings. The shutter speed and aperture
values of the exposure are displayed on the monitor. If shutter speed and aperture displays turn red,
the scene is beyond the exposure control range of the camera.
Aperture priority - A
The photographer selects the aperture and the camera sets the appropriate shutter speed to ensure
correct exposure. When aperture priority is selected, the aperture value on the monitor turns blue
and a double arrow icon appears next to it. If the LCD monitor is turned off, the aperture value is
fixed at the last setting and cannot be changed. The flash mode is set to flash cancel. Fill-flash can
be selected (p. 30).
Use the left/right keys of the controller (1) to set the desired aperture value. Press the shutter-release
button to activate the exposure system; the corresponding shutter speed will be displayed on the
monitor.
The aperture value can be changed in two steps: f/3.0 and f/6.7 at the lens’ wide-angle position, f/3.6
and f/8.0 at the lens’ telephoto position. As the
lens is zoomed, the aperture will automatically
1
shift. If the aperture value is beyond the shutter-
speed range, the shutter-speed display will turn
red on the monitor. For more on the aperture and
image control, see page 66.
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
56
Manual exposure - M
Manual exposure mode allows individual selection of shutter
speeds and apertures. This mode overrides the exposure system
giving the photographer total control over the final exposure. The
shutter speeds can be changed in half stop increments between
1/1000 and 4 seconds.
As changes are made to the exposure, the effect will be visible on the monitor. The shutter-speed
and aperture display will turn red on the monitor if the image is extremely under or overexposed. If
the monitor is black, increase the exposure until the image is visible; decrease the exposure if the
monitor is white. If the LCD monitor is turned off, the exposure is fixed at the last setting and cannot
be changed. When the shutter-release button is pressed partway down, the brightness of the live
image may change while the camera is focusing.
In manual exposure mode, the auto camera-sensitivity setting will fix the ISO value at 100. The
camera sensitivity can be changed in the basic section of the multi-function recording menu (p. 54).
The flash mode is set to flash cancel. Fill-flash can be selected (p. 30), but the live image will not
reflect the ambient or flash exposure. Bulb exposures can be made, see page 58.
2
1
To change the shutter speed use the left/right keys
of the controller (1) to set the desired shutter speed.
To change the aperture press the exposure-
compensation button (2); the aperture value will
turn blue. Use the left/right keys of the controller (1)
to set the desired aperture.
The exposure-compensation button switches
between the shutter speed and aperture display.
The value that can be set will be blue with a double
arrow icon to the left.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
BULB EXPOSURES
Bulb photographs can be taken in the manual-exposure mode (M)
(p. 57). Exposures up to fifteen seconds can be made by pressing
and holding the shutter-release button. The use of a tripod is
recommended. The camera’s exposure system cannot be used to
calculate bulb exposures; a separate light meter is recommended.
Set the exposure mode to manual in the basic section of the
multi-function recording mode menu (p. 54). Set the drive mode to
single-frame advance (p. 32).
Use the controller (1) to decrease the shutter-speed
value below four seconds until “bulb” is displayed.
3
To set the aperture value, press the exposure-
compensation button (2); the aperture display should
turn blue. Use the controller (1) to set the aperture.
2
To take the picture, press and hold the shutter-
release button (3) for the duration of the exposure.
Releasing the shutter button will end the exposure.
The monitor will be blank during the exposure.
1
Bulb indicator
Camera Notes
When making bulb exposures, noise can be more pronounced because of the unusually long
exposure times, especially at 400 ISO. When making long bulb exposures, a camera sensitivity
setting of 64 or 100 will produce excellent results. At higher ISO settings, using shorter expo-
sure times (8 seconds or less) will reduce the effect of noise.
MULTI-FUNCTION RECORDING MODE
58
Download from Www.Somanuals.com. All Manuals Search And Download.
FOCUS MODES
This camera has autofocus and manual focus control. The focus mode is set in the basic section of
the multi-function recording mode menu (p. 54).
Autofocus will produce excellent results in almost every situation, however, under certain conditions,
the autofocus system will not work accurately; see special focusing situations on page 27. In these
situations the camera can be manually focused.
After setting the camera to the manual focus mode (MF), “ZOOM” and “FOCUS” will appear at the
top of the LCD monitor. Press the center of the controller to switch between the two functions; the
function highlighted in blue is active. With “FOCUS” highlighted, use the up/down keys of the
controller to focus; the approximate focus distance is displayed at the bottom of the monitor next to
the frame counter. All distances are measured from the CCD.
When the focus is set to the minimum focusing distance, as the lens is zoomed, the distance will
change to match the minimum focusing distance at each focal length. Manual focus is not available
when the monitor is turned off; the controller function is automatically switched to the zoom.
Press the controller to switch between focus and
zoom (1). The active function is highlighted in blue
(2).
2
1
Use the up/down keys of the
controller to zoom or focus.
Focus distance
from the CCD.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
WHITE BALANCE
White balance is the camera’s ability to make different types of lighting appear neutral. The effect is
similar to selecting daylight or tungsten film, or using color compensating filters in conventional
photography.
An indicator is displayed on the monitor if a setting other than auto white-balance is chosen. White
balance is set in the basic section of the multi-function recording mode menu (p. 54).
Automatic White Balance
The automatic white balance compensates for the color temperature of a scene. In most cases, the
auto setting will balance the ambient light and create beautiful images, even under mixed-lighting
conditions. When the built-in flash is used, the white balance is set for the color temperature of the
flash.
Preset White Balance
Preset white-balance settings must be set before the image is taken. Once set, the effect is
immediately visible on the LCD monitor.
The built-in flash can be used with preset
white-balance settings, but will create a
Cloudy - for overcast outdoor scenes.
pinkish or blueish cast with the fluorescent
and tungsten settings. The flash is daylight
Daylight - for outdoor and sunlit
balanced and will produce acceptable
results with the daylight and cloudy
settings.
subjects.
Tungsten - for incandescent lighting:
household filament light bulbs.
Fluorescent - for fluorescent lighting: office
ceiling lights.
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
60
Custom White Balance
Custom-white-balance function allows a photographer to calibrate the camera to a specific lighting
condition. The setting can be used repeatedly until reset. Custom white balance is especially useful
with mixed-lighting conditions or when critical control over color is needed. The object used to make a
calibration should be white. A blank piece of white paper is an ideal surface and can easily be carried
in a camera bag. To calibrate the white balance for ambient light exposures, set the flash mode to
flash-cancel (p. 30).
Multi
Basic
Custom1
Custom2
Cloudy
To calibrate the camera, select the custom setting in the white
balance option in the basic section of the multi-function recording
mode menu; a window will open asking you to choose “set” or
“recall.” Use the controller to highlight “set” and then press the
center of the controller to enter the command; the custom white-
balance calibration screen will appear.
Exposure mode
Ima
Select set or recall.
Qua
Whi
Foc
Set Recall
Sensitivity
Custom
Custom WB set
M
Fill the image area with a white object; the object does not need
to be in focus. Press the shutter-release button to make the
calibration. The custom setting will remain in effect until another
calibration is made or the white-balance setting is changed.
Set WB with shutter button
If the custom white-balance setting needs to be used again, select the
custom setting on the basic section of the menu; a window will appear.
Highlight “recall” and press the controller to enter the command; the last
custom white-balance setting will be applied to the camera.
Select set or recall.
Set
Recall
61
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA SENSITIVITY - ISO
Five camera sensitivity settings can be selected: Auto, 64, 100, 200, and 400; the numerical values
are based on an ISO equivalent. ISO is the standard used to indicate film sensitivity: the higher the
number, the more sensitive the film. Camera sensitivity is set in the basic section of the multi-function
recording mode menu (p. 54).
The auto setting automatically adjusts the camera sensitivity to the light conditions between ISO 64
and 320. When the flash is activated and camera sensitivity is set to auto, the ISO value is set
between ISO 64 and 200. When any other setting than auto is used, “ISO” will appear on the data
panel, and “ISO” and the set value will be displayed on the monitor.
Photographers can select a specific sensitivity setting. As the ISO value doubles, the camera
sensitivity doubles. Like grain in silver-halide film that increases with speed, noise increases with
sensitivity in digital imaging; an ISO setting of 64 will have the least noise and 400 will have the most
noise. An ISO setting of 400 may allow the camera to be hand-held in low-light conditions without the
need of a flash.
FLASH RANGE AND CAMERA SENSITIVITY
The flash range is measured from the CCD. Because of the optical system, the flash range is not the
same at the lens’ wide-angle position as it is at the telephoto position.
ISO setting
AUTO
64
Flash range (wide angle)
0.5m ~ 3.5m (1.6 ft. ~ 11.5 ft.)
0.5m ~ 2.0m (1.6 ft. ~ 6.6 ft.)
0.5m ~ 2.5m (1.6 ft. ~ 8.2 ft.)
0.5m ~ 3.5m (1.6 ft. ~ 11.5 ft.)
0.5m ~ 5.0m (1.6 ft. ~ 16.4 ft.)
Flash range (telephoto)
0.9m ~ 3.0m (3.0 ft. ~ 9.8 ft.)
0.9m ~ 1.7m (3.0 ft. ~ 5.6 ft.)
0.9m ~ 2.1m (3.0 ft. ~ 6.9 ft.)
0.9m ~ 3.0m (3.0 ft. ~ 9.8 ft.)
0.9m ~ 4.2m (3.0 ft. ~ 13.8 ft.)
100
200
400
At the wide-angle lens position, when using the flash with subjects closer than 1m (3ft), vignetting
can occur. A slight shadow or shading may be apparent at the bottom of a horizontal image.
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
62
FULL-TIME AF
With full-time AF active, the autofocus systems continually focuses to keep the monitor image sharp.
This also reduces the autofocusing time when taking pictures. Full-time AF can be activated in the
custom 1 section of the multi-function recording mode menu (p. 54).
When the monitor is turned off or when the camera is set to manual focus, full-time AF is disabled.
Turning the full-time AF function off can help conserve battery power.
METERING MODES
The icons indicating the metering modes are displayed on the monitor. The metering mode is set in
the custom 1 section of the multi-function recording mode menu (p. 54).
Multi-segment metering uses 270 segments to measure luminance and color. This data is
combined with distance information to calculate the camera exposure. This advanced
metering system will give accurate worry-free exposures in almost all situations.
Spot metering uses a small area within the image to
calculate the exposure. When this mode is selected,
the LCD monitor will automatically activate if off and a
small circle will appear in the middle of the live image
indicating the measuring area. The spot allows precise exposure
measurements of a particular object without being influenced by
extremely bright or dark areas within the scene. If the LCD
monitor is turned off, the spot-metering mode will remain active.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPOSURE BRACKETING INCREMENT
In multi-function recording mode, three bracketing steps can be selected: 0.3 Ev, 0.5 Ev, 1.0 Ev. The
larger the number, the greater the difference in exposure between the images in the bracketed
series. For information on the bracketing drive mode, see page 36. The bracketing increment can be
changed in the custom 1 section of the multi-function recording mode menu (p. 54).
Normal
Under
Over
0.3 Ev
bracket
0.5 Ev
bracket
1.0 Ev
bracket
COLOR MODE
The color mode controls the appearance of a still image. This
must be set before the image is recorded. The color mode is set
in the custom 2 section of the multi-function recording mode
menu (p. 54). The live image on the monitors will reflect the
selected mode. The color mode has no effect on image file size.
Vivid Color
Natural Color
Black & White
Solarization
Sepia
Natural Color reproduces the colors in the scene faithfully. This
mode uses no monitor indicator when active. Vivid Color
increases the saturation of colors. Black & White produces
monochrome images. The sepia mode creates warm tone
monochrome images. Solarization produces a partial reversal of
tones and colors in the highlights.
B&W
Solarization
MULTI-FUNCTION RECORDING MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
64
IMAGE CONTROL - SHARPNESS, CONTRAST, & FILTER
Changes in color, sharpness, and contrast can be made using the custom 2 section of the multi-
function recording mode menu (p. 54). The sharpness, contrast and filter imaging controls give
photographers the ability to maximize the image information at the scene.
Any changes made with these functions are applied to the live image on the monitor. Changes made
to sharpness and contrast may be difficult to see on the monitor. However, when viewed on a
computer, the changes will be evident. The levels must be set before the image is recorded. If any
setting other than normal or off is selected, an indicator will be displayed showing an increase (+) or
decrease (–) in the quality selected. Turning the camera off will not reset these functions.
To accent or soften details in an image in three levels: hard (+),
normal, and soft (–).
Sharpness
To increase or decrease the contrast of the scene in three levels:
high (+), normal, and low (–).
Contrast
To adjust the overall color of a Natural Color or Vivid Color image:
warm (+) and cool (–).
Filter
Normal
Sharpness: hard
Contrast: low
Sharpness: soft
Contrast: high
65
Download from Www.Somanuals.com. All Manuals Search And Download.
A SHORT GUIDE TO PHOTOGRAPHY
Photography can be a rewarding pursuit. It is a broad and disciplined field that can take years to
master. But the pleasure in making photographs and the joy of capturing a magical moment cannot
be compared. This guide is an introduction to some basic photographic principles.
The lens aperture controls not only exposure, but also depth of field; the area between the closest
and the furthest object in focus. The larger the aperture value, the greater the depth of field and the
longer the shutter speed needed to make the exposure. The smaller the aperture value, the shallower
the depth of field and the faster the shutter speed needed to make the exposure. Usually landscape
photographs use a large depth of field (large aperture value) to keep the foreground and background
in focus, and portraits use a shallow depth of field (small aperture value) to separate the subject from
the background.
Depth of field also changes with focal
length. The wide-angle position of the lens
has a large depth of field; the telephoto
position has a shallow depth of field.
A SHORT GUIDE TO PHOTOGRAPHY
Download from Www.Somanuals.com. All Manuals Search And Download.
66
The shutter controls not only exposure, but
also the ability to stop motion. Fast shutter
speeds are used in sport photography to stop
action. Slow shutter speeds can be used to
show the flow of motion such as water
cascading over a waterfall. The use of a tripod
is recommended with slow shutter speeds.
The change in aperture and shutter speed is not apparent in the live image. Unlike film cameras, test
photographs can be taken and immediately viewed. For critical work, take a test photograph at the
set aperture or shutter speed and view the result in Quick View. The image can be deleted if not
acceptable and another test image can be taken at a different setting.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
MOVIE RECORDING
This camera can record up to sixty seconds of digital video with sound. The motion JPEG image is
320 X 240 pixels (QVGA). The effective image area is 284 X 211 pixels; two thin lines will appear to
the left and right of the image when played back. Under certain conditions less than sixty seconds of
digital video may be recorded.
Total recording time with an 16MB CompactFlash card is approximately 51 seconds. The digital video
recording rate is approximately 296KB per second. Actual CompactFlash card capacity depends on
the subject and the number of still images captured.
Set the main dial to movie recording. Before recording, the
data-panel and monitor frame counters show the maximum
time in seconds can be recorded with the next movie clip. A
maximum of 60 seconds is displayed until the amount of
remaining time falls below one minute, then the remaining
number of seconds that can be recorded is displayed.
Available recording time
Frame the picture as described in the basic recording
operation section (p. 25). Press the shutter-release button
partway down to lock the focus. Press the shutter-release
button all the way down and release to start recording. An
indicator will appear in the lower right corner of the monitor
during recording.
The zoom and focus are fixed during recording. The camera will continue to record until the recording
time is used or the shutter-release button is pressed again. When recording, the data panel and
monitor frame counters will count down the remaining time.
MOVIE RECORDING
Download from Www.Somanuals.com. All Manuals Search And Download.
68
NOTES ON MOVIE RECORDING
In movie recording, some functions can be used, some are fixed, and some are disabled. This mode
has no menu controls.
Exposure mode
Camera sensitivity (ISO)
Focus area
Program (fixed)
Auto (fixed)
Wide focus area (fixed)
Autofocus (fixed)
Auto (fixed)
Focus control
White balance
Macro mode
Available (p. 28)
Available (p. 50)
All displays available except monitor off (p. 37)
Disabled
Exposure compensation
Display button
Flash
Digital zoom
Disabled
RECORDING MOVIES WITH THE IR REMOTE CONTROL RC-3
The RC-3 remote control (sold separately) can
Emitter window
be used to record movie clips up to 5m (16ft)
away. Simply point the remote control toward the
camera and use the release or delay button to
Delay button
start and stop the recording.
When using the release button, the self-time
lamp (1) will blink once before the camera starts
to record; when using the delay button, the self-
timer lamp will blink for two seconds before
recording. The lamp will glow to indicate the
camera is recording. Both buttons will stop the
camera instantly when pressed. The remote
control may not operate with backlit subjects or
under fluorescent light.
Release button
1
69
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK MODE -
ADVANCED OPERATION
The basic functions in this mode are described in the basic playback section on pages 38 through
41. This section covers how to play back movie clips and voice memos as well as the advanced
functions on the playback menu.
PLAYING BACK VOICE MEMOS
Voice memos (p. 46) can be played back in Quick View and the playback mode. The
voice memo indicator will be displayed at the bottom of the monitor if an audio track is
attached to the displayed still image.
Press the center of the controller to start the audio
playback.
Playback time is displayed on a bar at the top of the image. The
display returns to Quick View or the playback mode when the
audio track finishes.
Press the down key of the controller to cancel the
playback.
stop
Press the display button to view the image
with or without the guidance bar.
Speaker
PLAYBACK MODE - ADVANCED OPERATION
70
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING MOVIES
Movie clips can be played back in Quick View and the playback mode. A thumbnail of the first frame
of the clip indicates a movie file.
Play
Use the left/right keys of the controller to display the movie
clip to be viewed.
Press the center of the controller to play back
the clip.
Playback time is displayed on a bar at the top of the image.
The display returns to Quick View or the playback mode
when the movie clip finishes.
: pause
: stop
23s
Pressing the controller during playback pauses the movie
clip; pressing the controller again resumes the playback.
When the movie clip finishes, the first frame is displayed.
Press the display button to view the movie with
or without the guidance bar.
To cancel the playback of a movie, press the down key of the controller.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
NAVIGATING THE PLAYBACK-MODE MENU
In playback mode, press the menu button (1) to activate the menu. The menu button also turns off
the menu after making settings. The four-way keys of the controller (2) are used to move the cursor in
the menu. Pressing the center of the controller will enter a setting.
Activate the playback-mode menu with the menu button. The basic tab at the top of the menu will be
highlighted. Use the left/right keys of the controller to highlight the appropriate menu tab; the menus will
change as the tabs are highlighted.
When the desired menu section is displayed, use the up/down keys to scroll through the menu options.
Highlight the option whose setting needs to be changed.When scrolling in one direction, the cursor will
jump between the top and bottom of the menu.
With the menu option to be changed highlighted, press the right controller key; the settings will be
displayed with the current setting highlighted. To return to the menu options, press the left key.
Use the up/down keys to highlight the new
setting.
Press the controller to select the
highlighted setting.
Once a setting has been selected, the
cursor will return to the menu options
and the new setting will be displayed.
Changes can continue to be made. To
return to the playback mode, press the
menu button.
Play
Basic
Custom1
Custom2
Delete
Lock
Index format
–
–
2
1
9 frames
PLAYBACK MODE - ADVANCED OPERATION
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Basic
Yes
No
Delete
Lock
This frame
All frames
Choosing “Yes” will execute the oper-
ation, “No” will cancel it.
Marked frames
This frame
All frames
Marked frames
Unlock frames
9 frames
For information on frame-selection screens, see page 74.
Index format
4 frames
Custom 1
Slide show
Enter
Playback
All frames
Marked frames
1 - 60 sec.
Yes
Duration
Repeat
Pressing the down key of the con-
troller will cancel the slide show and
return to the menu.
No
Custom 2
Print
Number of
copies
This frame
All frames
Marked frames
Yes
To specify the number of
copies of each image.
Index print
Cancel print
Copy
No
All frames - F
All frames - C
This frame
Marked frames
Yes
No
1 Copying to camera memory.
2 Change CF card.
3 Copying to CF card.
4 Copying completed.
Refer to the following sections for
descriptions of the menu options
and their settings.
New folder name
73
Download from Www.Somanuals.com. All Manuals Search And Download.
FRAME-SELECTION SCREEN
When a marked-frames setting is chosen on a menu, the frame selection screen will appear. This
screen allows multiple images to be chosen. An indicator in the bottom left corner shows if the image
is a movie clip or has a voice memo. The index format of the screen can be changed in the basic
section of the playback-mode menu (p. 72).
Mark frames
Play
The left/right keys of
the controller move the
yellow border to select
the image.
The up key of the
controller selects the
frame; when selected,
an icon will appear
next to the image. The
down key will deselect
the image removing
the icon.
Menu button
Cancels the screen and
any operation made.
: select
: confirm
: enter
The garbage-can icon indicates the
image is selected for deletion.
The key icon indicates the image is
locked or selected to be locked.
The check icon indicates the image is
selected for the slide show or to be
copied to another CompactFlash card.
The printer icon indicates the image is
selected for printing. The number next to
the icon shows the number of copies
requested.
Press the controller to complete the operation.
PLAYBACK MODE - ADVANCED OPERATION
74
Download from Www.Somanuals.com. All Manuals Search And Download.
VIEWING IMAGES ON A TELEVISION
It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL
standards. The video-output setting can be checked and set in the custom 2 section of the setup
menu (p. 84).
1. Turn off the television and the camera.
2
2. Insert the mini-plug end of the AV cable into the camera’s AV-
out terminal.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the
video output. The white plug is for the monaural audio output.
The audio output will also be heard through the camera’s
speaker while connected to a television.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn the camera’s mode dial to the playback position. The
camera’s monitors will not activate when the camera is
attached to a television. The playback-mode display will be
visible on the television screen.
3
7. View images as described in the playback section.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
DELETING FILES
Deleting permanently erases the file. Once deleted, a file cannot be
recovered. Care should be taken when deleting images.
Single, multiple, or all files in a folder can be deleted with the playback-mode menu. Before an image
file is deleted, a confirmation screen will appear; choosing “Yes” will execute the operation, “No” will
cancel it. To delete files in other folders, the folder must first be selected in the custom 1 section of
the setup menu (p. 84). The delete option has three settings:
This frame - The file displayed or highlighted in playback mode will be deleted.
All frames - All unlocked files in the selected folder will be deleted.
Marked frames - To delete multiple files. When this setting is chosen, the frame-selection screen will
be displayed. Use the left/right keys of the controller to highlight the first file to be deleted. Pressing
the up key will mark the thumbnail with the garbage-can icon. To deselect a file for deletion, highlight
it with the yellow border and press the down key; the garbage-can icon will disappear. Continue until
all the files to be deleted are marked. Press the controller to continue (the confirmation screen will
appear), or press the menu button to cancel the operation and return to the playback menu. On the
confirmation screen, highlighting and entering “Yes” will delete the marked files.
The delete function will only erase unlocked files. If a file is locked, it must be unlocked before it can
be deleted.
PLAYBACK MODE - ADVANCED OPERATION
76
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCKING FILES
Single, multiple, or all files in a folder can be locked. A locked file cannot be deleted by either the
playback-mode menu functions or the QV/delete button. Important image files should be locked. To
lock files in other folders, the folder must first be selected in the custom 1 section of the setup menu
(p. 84). The lock option has four settings:
This frame - The file displayed or highlighted in playback mode will be locked.
All frames - All files in the folder will be locked.
Marked frames - To lock or unlock multiple files. When this setting is chosen, the frame-selection
screen will be displayed. Use the left/right keys of the controller to highlight the file to be locked.
Pressing the up key will mark the thumbnail with the key icon. To unlock a file, highlight it with the
yellow border and press the down key; the key icon will disappear. Continue until all the files to be
locked are marked. Press the controller to lock the marked frames, or press the menu button to
cancel the operation and return to the playback menu.
Unlock frames - All files in the folder will be unlocked.
Locking a file will protect it from a delete function. However, the formatting function (p. 86) will erase
all files on a CompactFlash card whether locked or not.
CHANGING THE INDEX PLAYBACK FORMAT
The index format option allows the
index playback to be displayed
with four or nine images. This
affects all index displays.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
SLIDE SHOW
The custom 1 section of the playback-mode menu controls the slide-show function. This function
automatically displays all still images in a folder in order.
Frame count-
down / total num-
ber of images in
the presentation.
Press the controller to pause and restart the
presentation.
To cancel the presentation, press the down
key of the controller.
PLAYBACK MODE - ADVANCED OPERATION
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu options
Settings
To start the slide-show presentation. Pressing the center
of the controller will pause the presentation. During the
slide show, press the down key of the controller to stop
the presentation and return to the playback-mode menu.
Slide
show
Enter
To select all the images in the folder to be displayed in
the slide-show presentation.
All frames
To select specific images in the folder to be displayed in
the slide-show presentation. When this setting is chosen,
the frame-selection screen will be displayed. Use the
left/right keys of the controller to highlight the image to be
included in the presentation. Pressing the up key will
mark the image with a check icon. To deselect a marked
image, highlight it with the yellow border and press the
down key; the check icon will disappear. Continue until all
the images have been edited. Press the controller to set
the marked frames, or press the menu button to cancel
the operation and return to the playback menu.
Playback
Marked
Frames
To select the period each image will be displayed during
the slide show.
Duration
Repeat
1 - 60s.
Selecting “Yes” will cause the slide show to repeat until it
is canceled using the down key of the controller. “No” will
end the slide show presentation and return to the play-
back-mode menu when all the images have been dis-
played once.
Yes / No
79
Download from Www.Somanuals.com. All Manuals Search And Download.
ABOUT DPOF
This camera is supported by DPOF™ version 1.1. The DPOF (Digital Print Order Format) allows
direct printing of still images from digital cameras. After the DPOF file is created, the CompactFlash
card is simply taken to a photofinishing service or inserted into the CompactFlash-card slot of DPOF
compatible printers. When a DPOF file is created, a misc. folder is automatically made on the
CompactFlash card to store it (p. 98).
CREATING A DPOF PRINT ORDER
The print menu option is used to set an order for standard prints from images in a specific folder.
Single, multiple, or all images can be printed. If a CompactFlash card has multiple folders, a printing
file must be created for each folder. Folders are selected in the custom 1 section of the setup menu
(p. 84).
This-frame - To create a DPOF file for the image displayed or highlighted in playback mode.
All-frames - To create a DPOF file for all images in the folder specified in the custom 1 section of the
setup menu (p. 84).
Marked frames - To chose a group of images to be printed or when the number of copies for each
image varies. When selected, the frame selection screen will appear. Use the left/right keys of the
controller to highlight an image to be printed. Pressing the up key will mark the image with the printer
icon. The number next to the icon indicates the number of copies of that image will be printed.
Pressing the up key will increase the number of copies, pressing the down key will decrease the
number. A maximum of nine copies can be ordered. To deselect an image for printing, press the
down key until the the number of copies reaches zero and the printer icon disappears. Continue until
all the images to be printed are marked. Press the controller to create the DPOF file, or press the
menu button to cancel the operation and return to the playback menu.
PLAYBACK MODE - ADVANCED OPERATION
80
Download from Www.Somanuals.com. All Manuals Search And Download.
When the this-frame or all-frames setting is chosen, a screen will appear requesting the number of
copies of each image; a maximum of nine copies can be ordered. Use the up/down keys of the
controller to set the number of copies desired. If the all-frames setting was used to create a print
order, any additional images saved afterwards in the folder will not be included in the order.
DPOF files created with another camera will be canceled.
ORDERING AN INDEX PRINT
To create an index print of all the images in the folder, select “Yes.” To
cancel an index print, simply change the setting to “No.” If an index-
print order is created, any additional images saved afterwards in
the folder will not be included in the index print. If a CompactFlash
card has multiple folders, an index print must be selected for each
folder. Folders are selected in the custom 1 section of the setup menu
(p. 84).
The number of images printed per sheet differs between printers. The
information printed with the thumbnails can vary.
CANCELING A DPOF PRINT ORDER
The cancel-print option deletes the DPOF files. When the setting is selected, a confirmation screen
will appear; choosing and entering “Yes” will execute the operation and cancel the print order.
All frames F - To cancel the printing file in the folder. Folders are selected in the custom 1 section of
the setup menu (p. 84).
All frames C - To cancel all printing files on the CompactFlash card.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING IMAGES
Image files can be copied from one CompactFlash card to another. Up to 23MB of data can be
transferred. Every time the copy function is used, a new folder is automatically created for the images
(p. 98). Images with voice memos are copied with their audio files. Copies of locked images are
unlocked (p. 77). DPOF information is not copied.
This frame - To copy the image displayed or highlighted in playback mode.
Marked frames - To copy single or multiple images. When selected, the frame-selection screen will
appear; highlight the image to be copied with the yellow border and then press the up key of the
controller to mark it with the check icon. To deselect an image to be copied, highlight the selected
image and press the down key; the check icon will disappear. Continue until all the images to be
copied are marked. Press the controller to continue, or press the menu button to cancel the operation
and return to the playback menu.
Play
Copy
When the image(s) to be copied are
selected, a screen with four messages is
displayed; the messages are highlighted
during the copying procedure. When the
change-CF-card message is highlighted,
remove the camera’s CompactFlash card
and insert the card to which the image
should be copied.
Copying to camera memory
1
2
3
4
Change CF card
Copying to CF card
Copy completed
Enter
Press the center of the controller to continue or the menu button to cancel the copy operation.
After the copy-completed message is highlighted, a new screen will appear to indicate the name of
the new folder containing the copied images; press the controller to return to
<101MLTCP>
the menu.
OK
PLAYBACK MODE - ADVANCED OPERATION
82
Download from Www.Somanuals.com. All Manuals Search And Download.
If too many images have been selected, a warning will appear and the copy routine will be canceled.
Divide the number of images into two or three batches. The copy-unsuccessful message will appear
when one or all of the images could not be copied. Check the second CompactFlash card to see
which files were copied and then repeat the procedure for the images that were not transferred.
Minolta History
On February 20th, 1962, John Glenn became the first American to orbit the Earth. On board his
Friendship 7 spacecraft was a Minolta Hi-matic camera to record that historic event. The 4 hour,
55 minute, and 23 second flight orbited the Earth three times at an average speed of 28,000
kph (17,500 mph).
Mr. Glenn visited our Sakai camera factory in Japan on May 24th,
1963 to plant a palm tree to celebrate the occasion. The palm tree
is still in the courtyard of the factory and stands over eight meters
tall (26ft).
The camera? It was not lost. It is on display at the
Smithsonian Institution’s National Air and Space
Museum in Washington D.C. This and other objects
from John Glenn’s Friendship 7 Mercury flight can be
found in galley 210, “Apollo to the Moon.”
83
Download from Www.Somanuals.com. All Manuals Search And Download.
SETUP MODE
NAVIGATING THE SETUP MENU
To access the menu, simply turn the mode dial to the setup position. The four-way keys of the
controller (1) are used to move the cursor in the menu. Pressing the controller will enter a setting.
When the menu activates, the basic tab at the top of the menu will be highlighted. Use the left/right keys
of the controller to highlight the appropriate menu tab; the menus will change as the tabs are highlighted.
When the desired menu section is displayed, use the up/down keys to scroll through the menu options.
Highlight the option whose setting needs to be changed. When scrolling in one direction, the cursor will
jump between the top and bottom of the menu.
With the menu option to be changed highlighted, press the right controller key; the settings will be
displayed with the current setting highlighted. To return to the menu options, press the left key.
Use the up/down keys to highlight the new
setting.
Press the controller to select the highlighted
setting.
Once a setting has been selected, the
cursor will return to the menu options
and the new setting will be displayed.
Setting can continue to be made.
Setup
Basic
Custom1
Custom2
LCDbrightness
Format
3
–
1
Power save
Language
1 min
English
–
Display mode
SETUP MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Basic
Custom 2
LCD brightness
1 (Low) ~ 5 (High)
Enter
Reset default
Enter
Format
Date/Time set
Date format
Enter
Power save
Language
1, 3, 5, 10 min.
Japanese
English
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
NTSC
Deutsch
Video output
Français
PAL
Español
Display mode
Standard display
Focus frame
Histogram
Grid
Yes
No
Choosing “Yes” on the confirmation screens will
execute the operation, “No” will cancel it.
Scale
Image only
Setup
Date/Time set
Custom 1
File # memory
On / Off
Folder name
Standard form
4
.
20
.
2003
16 : 33
Date form
Select folder
Audio signals
(Folder name)
Off
1
Enter
2
On the date/time setting screen, use the left/right keys of
the controller to select the year, month, day, hour, or
minute. The up/down keys are used to change the value.
Press the central button of the controller to set the
calendar and clock.
Shutter FX
Off
1
2
Volume
1 (Low) - 3 (High)
Refer to the following sections for
descriptions of the menu options
and their settings.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD MONITOR BRIGHTNESS
The brightness of the LCD monitor can be set in five levels from 1 (low) to 5 (high). When this option
is selected, the live image is displayed behind the menu. As each setting is highlighted, the monitor
will adjust accordingly; the controller must be pressed to set the highlighted level.
FORMATTING COMPACTFLASH CARDS
When a CompactFlash card is formatted, all data is erased.
The formatting function is used to erase all data on a CompactFlash card. Before formatting a
CompactFlash card, copy the data to a computer or storage device. Locking images will not protect
them from being deleted when the card is formatted. Always format the CompactFlash card using the
camera; never use a computer to format a card.
When the format option is selected and entered, a confirmation screen will appear. Choosing “Yes”
will format the card, choosing “No” will cancel the formatting operation. A screen will appear to
indicate the card has been formatted; press the controller to return to the setup menu.
A CompactFlash card used in another camera may have to be formatted before being used. If the
unable-to-use-card message appears, the card is not compatible with the camera and cannot be
formatted.
AUTO POWER SAVE
The camera will turn off the data panel to conserve battery power if no operation is made within a
certain period. The length of this period can be changed to 1, 3, 5, or 10 minutes. The auto-power-
save option will not affect the display period of LCD monitor; it will shut down after 30 seconds. To
restore the displays when they shut down, simply press the shutter-release button.
When the camera is connected to the computer, the auto-power-save period is set to ten minutes.
This period cannot be changed.
SETUP MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
86
LANGUAGE
The language used in the menus can be changed. The language is selected in the basic section of
the setup menu (p. 84).
DISPLAY MODE
The recording mode
displays activated by the
display button (p. 37) can be
selected in the basic section
of the setup menu. The
display cycle is the same as
the order shown on the
menu.
Standard display
Focus frame only
Real-time histogram
Grid
Scale
Live image only
Setup
Basic
Custom1
Custom2
Display-mode settings with a check mark are
included in the display cycle. To change displays
used, highlight the setting using the controller, and
then press the right key (1) to check or uncheck
the box. Press the controller to set the selected
displays (2).
LCDbrightness
Format
Std. display
Focus frame
Histogram
Grid
1
2
Power save
Language
Display mode
Scale
Image only
87
Download from Www.Somanuals.com. All Manuals Search And Download.
FILE NUMBER (#) MEMORY
When file number memory is selected, if a new folder is created, the first file stored in the folder will
have a number one greater than the last file saved. If the file number memory is disabled, the image
file name will have a number one greater than the last image saved in the folder.
If file number memory is active and the CompactFlash card is changed, the first file saved to the new
card will have a number one greater than the last file saved on the previous card if the new card
does not contain an image with a greater file number. If it does, the file number of the new image will
be one greater than the greatest on the card.
FOLDER NAME
All recorded images are stored in folders on the memory card. Folder names
come in two formats, standard and date.
Standard folders have an eight character name. The initial folder is named
100MLT24. The first three digits are the folder’s serial number, which will increase
100MLT24
by one each time a new folder is created. The next three letters refer to Minolta,
and the last two numbers indicate the camera used; 24 indicates a DiMAGE
S414.
(Standard)
A date folder name also starts with the three digit serial number and is followed
by one register for the year, two register for the month, and two registers for the
day: 101YMMDD. The folder 10130412 was created in 2003 on April 12th.
10130412
With the date folder format selected, when an image is recorded a new folder with
the day’s date will be created. All images recorded that day will be placed in that
folder. Images recorded on a different day will be placed in a new folder with the
corresponding date. If the file number memory function is off, when a new folder
(Date)
is created, the serial number in the image-file name is reset to 0001. If file number memory function
is on, the serial number in the image-file will be one greater than the last image saved. For more
information on folder organization and file names, see page 98.
SETUP MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
88
SELECT FOLDER
This option allows the selection of existing folders. All images recorded will be placed in the selected
folder if the folder-name option is set to standard form. In quick view or playback mode, only the
images in the selected folder can be viewed or edited.
Except for the all-frames-C setting in the custom 2 section of the playback-mode menu, changes
made with menus only affect the images in the selected folder. To make changes to all images in
multiple folders, each folder must be selected and the menu operation repeated for each folder.
Formatting a CompactFlash card erases all folders regardless if they are selected or not.
AUDIO SIGNALS
Every time a button is pressed, an audio signal will give a positive confirmation of the operation. The
audio signals can be turn off in the custom 1 section of the setup menu (p. 84). The tone of the signal
can also be changed; signal 1 is mechanical and signal 2 is electrical.
SHUTTER FX
When the shutter is released, a shutter sound effect will
give a positive confirmation of the operation. The sound
effect can be turn off in the custom 1 section of the setup
menu (p. 84). Two shutter effects are available; signal 1 is
mechanical and signal 2 is electrical. The mechanical
shutter sound was taken from the legendary Minolta CLE, a
compact rangefinder that represents the pinnacle of the
development of the Leitz-Minolta CL.
VOLUME
The speaker volume can be increased or decreased. This affects the audio signals and shutter FX
only and will not change the levels of the voice memo or movie audio track.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
RESETTING THE CAMERA
This function affects all modes. When selected, a confirmation screen will appear; choosing “Yes”
resets the following functions and settings, “No” cancels the operation.
Default Setting
Program
Autofocus
Wide focus area
Off
Page
56
59
52
48
32
30
44
44
46
47
49
63
50
62
60
63
64
64
65
65
65
77
78
78
Exposure mode
Focus mode
Focus area
Digital zoom
Drive mode
Single-frame advance
Auto flash
Standard
2272 X 1704
Off
Flash mode
Image quality
Image size
Voice memo
Date imprinting
Instant playback
Metering mode
Exposure compensation
Camera sensitivity (ISO)
White balance
Full-time AF
Off
Off
Multi-segment
0.0
Auto
Auto white balance
Off
Exposure bracket
Color mode
0.5 Ev
Natural Color
Normal
Sharpness
Contrast
Normal
Filter
Off
Index playback format
Duration (Slide Show)
Repeat (Slide Show)
9 frames
5 seconds
No
SETUP MODE
90
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD monitor brightness
Auto-power-save period
3
86
86
1 minute
Standard, focus frames only, real-time
histogram, live image only
Display mode
87
File number memory
Folder name
Audio signals
Shutter FX
Off
88
88
89
89
89
Standard
1
1
2
Volume
DATE AND TIME SETTING
It is important to accurately set the clock. When a still image or a movie clip is recorded, the date and
time of the recording are saved with the image and are displayed during playback or can be read with
the DiMAGE Viewer software included on the CD-ROM. The camera’s clock is also used with date
imprinting (p. 47). To set the clock and calender, see page 20.
DATE FORMAT
The date format that is displayed or imprinted can be changed:YYYY/MM/DD (year, month, day),
MM/DD/YYYY (month, day, year), DD/MM/YYYY (day, month, year). Simply select the format and
enter it by pressing the center of the controller; the new format will be displayed on the menu.
VIDEO OUTPUT
Camera images can be displayed on a television (p. 75). The video output can be changed between
NTSC and PAL. North America uses the NTSC standard and Europe uses the PAL standard. Check
which standard is used in your region to play back images on your television set.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
DATA-TRANSFER MODE
Read this section carefully before connecting the camera to a computer. Details on using and
installing the DiMAGE Viewer software are found in the supplied software manual. The DiMAGE
manuals do not cover the basic operation of computers or their operating systems; please refer to the
manual supplied with your computer.
SYSTEM REQUIREMENTS
For the camera to be connected directly to the computer and used as a mass-storage device, the
computer must be equipped with a USB port as a standard interface. Both the computer and the
operating system must be guaranteed by their manufacturers to support USB interface. The following
operating systems are compatible with the camera:
IBM PC / AT Compatible
Macintosh
Windows 98, 98SE, Me,
2000 Professional, and XP.
Mac OS 9.0 ~ 9.2.2 and Mac OS X
10.1.3 - 10.1.5, 10.2.1, and 10.2.2.
Check the Minolta web site for the latest compatibility information:
North America: http://www.minoltausa.com
Europe: http://www.minoltasupport.com
Users with Windows 98 or 98 second edition will need to install the driver software on the included
DiMAGE Viewer CD-ROM (p. 95). No special driver software is required for other Windows or
Macintosh operating systems.
Customers who have bought a previous DiMAGE digital camera and have installed the Windows 98
driver software must repeat the installation procedure. The updated version of the driver software
included on the supplied DiMAGE Viewer CD-ROM is required for the operation of the DiMAGE S414
with a computer. The new software will have no affect on the performance of older DiMAGE cameras.
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
92
CONNECTING THE CAMERA TO A COMPUTER
A fresh set of batteries should be used when the camera is connected to a computer. The use of the
AC adapter (sold separately) is recommended over the use of batteries. For users with Windows 98
or 98SE, read the section on how to install the necessary USB driver before connecting the camera
to a computer (P. 95).
Start up the computer. The computer must be turned on before connecting the camera.
1
Insert the CompactFlash card into the camera. Confirm that the
2
correct card is in the camera. To change the CompactFlash
while the camera is connected to a computer, see page 102.
3
Open the card-slot door. Attach the smaller plug of the USB
cable to the camera. Make sure the plug is firmly attached.
3
Attach the other end of the USB cable to the computer’s USB
4
port. Make sure the plug is firmly attached. The camera
should be connected directly to the computer’s USB port.
Attaching the camera to a USB hub may prevent it from
operating properly.
4
Set the mode dial to the data-transfer position to initiate the
5
Trans
USB connection. A screen will appear to indicate the beginning
of the connection process. When the signal has been received
by the computer, the LCD monitor will turn off.
Initializing USB
connection
93
Download from Www.Somanuals.com. All Manuals Search And Download.
When the camera is properly connected to the computer, a
drive icon, or volume, will appear. When using Windows XP or
Mac OS X, a window will open requesting instructions on
what to do with the image data; follow the directions in the
window. If the computer does not recognize the camera,
disconnect the camera and restart the computer. Repeat the
connection procedure above.
Windows XP
Mac OS X
Windows
Mac OS
Mac OS X
The volume name varies between memory cards.
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
94
CONNECTING TO WINDOWS 98 AND 98 SECOND EDITION
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert
it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver
software is required for other Windows or Macintosh operating systems.
Automatic Installation
Before connecting the camera to the
computer, place the DiMAGE Viewer CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically
activate. To automatically install the
Windows 98 USB driver, click on the
starting-up-the-USB-device-driver-installer
button. A window will appear to confirm
that the driver should be installed; click
“Yes” to continue.
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer and connect the
camera (p. 93) to complete the operation.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Installation
To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a-
computer section on page 93.
When the camera is plugged into the computer,
the operating system will detect the new device
and the add-new-hardware-wizard window will
open. Place the DiMAGE software CD-ROM in the
CD-ROM drive. Click “Next.”
Choose the recommended search for a suitable
driver. Click “Next.”
Choose to specify the location of the driver. The
browse window can be used to indicate the
driver location. The driver should be located in
the CD-ROM drive at :\Win98\USB. When the
location is shown in the window, click “Next.”
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
96
The add new hardware wizard will confirm the
location of the driver. Click “Next” to install the
driver in the system.
One of three drivers may be located:
MNLVENUM.inf, USBPDR.inf, or USBSTRG.inf.
The letter designating the CD-ROM drive will vary
between computers.
The last window will confirm the driver has been
installed. Click “Finish” to close the add new
hardware wizard. Restart the computer.
When the my-computer window is opened, a new
removable-disk icon will be displayed. Double
click on the icon to access the camera’s
CompactFlash card; see page 98.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPACTFLASH CARD FOLDER ORGANIZATION
Once the camera is connected to the computer, image and audio files can
be accessed by double clicking on icons. Image folders are located in the
DCIM folder. To copying images and audio recordings, simply drag and drop
the file icon into a location in the computer.
Files and folders on the memory card can be deleted using the computer.
Never format the memory card from the computer; always use the camera to
format the card. Only files recorded by the
Drive Icon
Dcim
camera should be stored on the memory card.
The misc. folder
contains DPOF
print files (p. 80).
Misc
100MLT24
10130801
102MLTCP
PICT0003.MOV
PICT0002.JPG
PICT0002.WAV
PICT0001.TIF
Fine, standard,
or economy
image
PICT0002’s
voice-memo
audio file
PICT0003.THM
Movie clip
PICT0001.THM
TIFF image
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
98
Image and audio file names begin with “PICT” followed by a four-digit file number and a tif, jpg, mov,
or thm extension. Voice-memo audio files have a wav extension and the file name corresponds to its
image file. The thumbnail images (thm) are produced with TIFF images and movie clips and are only
used in camera and DiMAGE Viewer operation.
Copy images (p. 82) are placed in a folder with a name ending in “CP.” When a new folder is created,
the first three digits in the folder name will be one greater than the largest folder number on the card.
When the index number in the image file name exceeds 9,999, a new folder will be created with a
number one greater than the greatest folder number on the memory card: e.g. from 100MLT24 to
101MLT24.
The number in the image file name may not correspond to the frame number of the image. As
images are deleted in the camera, the frame counter will adjust itself to show the number of images
on the card and reassign the frame numbers accordingly. The serial numbers used with image files
will not change when an image is deleted. When a new image is recorded, it will be assigned a
number one greater than the largest serial number in the folder. File serial numbers can be controlled
with the file-number-memory function in the custom 1 section of the setup menu (p. 84).
Camera Notes
Image files contain exif tag data. This data includes the time and date the image was recorded
as well as the camera settings used. This data can be viewed with the camera or the DiMAGE
Viewer software. If a camera image is opened in a photo-retouching application that does not
support exif tags, such as Adobe Photoshop, and then the image is saved overwriting the origi-
nal data, the exif tag information is erased. When using software other than the DiMAGE
Viewer, always make a backup copy of the image files to protect the exif tag data.
To view images correctly on your computer, the monitor’s color space may need to be adjusted.
Refer to your computer manual on how to calibrate the display to the following requirements:
sRGB, with a color temperature of 6500K, and a gamma of 2.2. Changes made to the captured
image with the camera’s contrast and color-saturation controls will affect any color-matching
software in use.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
DISCONNECTING THE CAMERA FROM THE COMPUTER
Never disconnect the camera when the access lamp is red - the
data or memory card may permanently be damaged.
Windows 98 / 98 Second Edition
Confirm that the access lamp is not lit. Turn off the camera and then disconnect the USB cable.
Windows Me, 2000 Professional, and XP
To disconnect the camera, click once on the unplug-or-eject-hardware icon located on
the task bar. A small window will open indicating the device to be stopped.
Click on the small window to stop the
device. The safe-to-remove-hardware
window will open. Close the window,
turn the camera off, and then
disconnect the USB cable.
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon; a small window indicating the unplug-or-eject-
hardware routine will open. Click on the small window.
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
100
The hardware devices to be stopped will be
displayed in the unplug-or-eject-hardware window.
Highlight the device by clicking on it then click “Stop.”
A confirmation screen will appear to
indicate the devices to be stopped. Click
“OK” to stop the device.
A third and final screen will appear to
indicate the camera can be safely
disconnected from the computer. Close
the window, turn the camera off, and then
disconnect the USB cable.
Macintosh
Confirm that the access lamp is not lit and then drag the
mass-storage device icon and drop it into the trash. Turn
the camera off, and then disconnect the USB cable.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE COMPACTFLASH CARD - DATA-TRANSFER MODE
Never remove a memory card when the access lamp is red - the
data or memory card may permanently be damaged.
Windows 98 and 98 Second Edition
1. Turn off the camera.
2. Change the CompactFlash card.
3. Turn the mode dial to the data-transfer position to remake the USB connection.
Windows ME, 2000 professional, and XP
1. Stop the USB connection using the unplug-or-eject-hardware routine (p. 100).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn the mode dial to the data-transfer position to remake the USB connection.
Macintosh
1. Stop the USB connection by dragging the drive icon into the trash (p. 101).
2. Turn off the camera.
3. Change the CompactFlash card.
4. Turn the mode dial to the data-transfer position to remake the USB connection.
AUTO POWER SAVE - DATA-TRANSFER MODE
If the camera does not receive a read or write command within ten minutes, it will shut down to save
power. When the camera shuts down, an unsafe-removal-of-device warning may appear on the
computer monitor. Click “OK.” Neither the camera or computer will be damaged in this operation.
Turn off the camera with the mode dial. Remake the USB connection by
turning the mode dial back to the data-transfer position.
DATA-TRANSFER MODE
Download from Www.Somanuals.com. All Manuals Search And Download.
102
QUICKTIME SYSTEM REQUIREMENTS
QuickTime is used for viewing movie clips and
IBM PC / AT Compatible
Pentium-based computer
playing voice-memo audio files. To install
QuickTime, follow the instructions in the
installer. Macintosh users can download the
latest version of QuickTime free of charge from
the Apple Computer web site:
Windows 95, 98, 98SE, NT, Me,
or 2000 Professional.
http://www.apple.com.
32MB or more of RAM
Sound Blaster or compatible sound card
DirectX 3.0 or later recommended
TROUBLESHOOTING
The section covers minor problems with basic camera operation. For major problems or damage, or if
a problem continues to reoccur frequently, contact a Minolta service facility listed on the back cover
of this manual.
Problem
Symptom
Cause
Solution
The batteries are dead.
Replace batteries (p. 16).
Reinsert the batteries taking
care that the negative and pos-
itive terminals are oriented as
indicated on the inside of the
battery chamber door (p.16).
The batteries are inserted
incorrectly.
Nothing dis-
played on the
data panel or
the monitors.
The camera
will not work.
Check that the adapter is con-
nected to the camera and a live
electrical outlet (p. 18).
The AC adapter is not
connected properly.
The camera was accidentally turned on
while in a bag or case, or the lens was hin-
dered while extending.
Turn the camera off and on to
restore operation.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Symptom
Cause
Solution
CompactFlash card is full Insert a new CompactFlash
and unable to store an card (p. 18), delete some
image at the image-quali- images (p. 76), or change the
“000” is dis-
played on the
frame counter. ty or image-size setting on image-quality or image-size
the camera.
setting (p. 44).
Shutter will
not release.
No-card warn-
ing appears on
the monitors.
No CompactFlash card in Insert a CompactFlash card
the camera.
(p.18).
Make sure the subject is within
the autofocus range (p. 26) or
use the macro mode (p. 28).
Subject is too close.
The camera is in macro
mode.
Cancel the macro mode setting
(p. 28).
Focus signal is
red.
Use the focus-lock function to
focus on an object at the same
distance as the subject (p. 26)
or use manual focus (p. 59).
Pictures are
not sharp.
A special situation is pre-
venting the autofocus sys-
tem from focusing (p.27)
Pictures are
taken indoors
or in low-light
situations with-
out flash.
Slow shutter speeds
Use a tripod, change the cam-
era sensitivity to a higher set-
result in blurred images
when the camera is hand- ting (p. 62), or use the flash (p.
held.
30).
Continuous
Change the image-quality set-
ting (p. 44).
advance does The image quality is set to TIFF.
not work.
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Problem
Symptom
Cause
Solution
While using
Move closer to the subject or
change the camera sensitivity
to a higher setting (p. 62).
flash, the pic- The subject is beyond the flash range (p.
tures are too
dark.
62).
Shooting data
is displayed,
but live image
is entirely
Camera set to Shutter speed and
Change the shutter speed or
aperture value until an image
appears on the monitor (p. 57).
manual-
aperture combination is
extremely under or over-
exposing the live image.
exposure
mode (M).
black or white.
Turn off the camera and remove the batteries or unplug the external power
supply. Wait for the message to disappear before reinserting the batteries or
plugging in the power supply. If the camera is hot, allow it to cool before
removing the batteries and Compactflash card.
“Err” dis-
played on the
data panel.
If the camera does not function normally, turn it off, remove and reinsert the batteries, or unplug and
reconnect the AC adapter. Always turn the camera off using the mode dial otherwise the
CompactFlash card may be damaged and camera settings reset. The camera temperature rises with
extended periods of use. Care should be taken to avoid burns when handling the camera, batteries,
or CompactFlash card.
ABOUT NI-MH BATTERIES
When using Ni-MH batteries, clean both battery terminals with dry cloth to wipe off any dirt or
residue. Because of the sophisticated computer system, the camera critically monitors power levels. If
the battery terminals are dirty, the camera may give a false low-battery warning. If battery
performance is unusually low, wipe the battery terminals with a clean, dry cloth.
Ni-MH battery performance will decrease if the batteries are often recharged before they have been
fully discharged. Completely exhaust the Ni-MH batteries using the camera before charging.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOVING THE DRIVER SOFTWARE - WINDOWS
1. Insert a memory card in the camera and connect it to the computer with the USB cable. Other
devices must not be connected to the computer during this procedure.
2. Right click on the My-computer icon. Select “properties” from the drop-down menu.
Windows XP: from the start menu go to the control panel. Click on the performance and
maintenance category. Click “System” to open the system properties window.
3. Windows 2000 and XP: select the hardware tab in the properties window and click the device-
manager button.
Windows 98 and Me: click the device-manager tab in the properties window.
4. The driver file will be located in the universal-serial-bus-controller or other-devices location of the
device manager. Click on the locations to display the files. The driver should be indicated with the
camera name. Under certain conditions, the driver name may not contain the camera name.
However, the driver will be indicated by either a question mark or exclamation point.
5. Click on the driver to select it.
6. Windows 2000 and XP: click on the action button to display the drop-down menu. Select “uninstall.”
A confirmation screen will appear. Clicking “Yes” will remove the driver from the system.
Windows 98 and Me: click the remove button. A confirmation screen will appear. Clicking “Yes” will
remove the driver from the system.
7. Disconnect the USB cable and turn off the camera. Restart the computer.
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
106
CARE AND STORAGE
CAMERA CARE
• Do not subject the camera to shock or impact.
• Turn off the camera when transporting.
• This camera is neither waterproof nor splashproof. Inserting or removing batteries or the CompactFlash
card, or operating the camera with wet hands may damage the camera.
• When at the beach or near water, take care not to expose the camera to water or sand. Water, sand, dust,
or salt can damage the camera.
• Do not leave the camera under direct sunlight. Do not point the lens directly at the sun; the CCD may be
damaged.
CLEANING
• If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth. If the camera or
lens comes in contact with sand, gently blow away loose particles. Wiping may scratch the surface.
• To clean the lens surface, first blow away any dust or sand, then gently wipe the lens with a cloth or tissue
designed for optics. Use lens-cleaning fluid if necessary.
• Never use organic solvents to clean the camera.
• Never touch the lens surface with your fingers.
STORAGE
• Store in a cool, dry, well-ventilated area away from dust and chemicals. For long periods of disuse, store
the camera in an airtight container with a silica-gel drying agent.
• Remove the batteries and CompactFlash card from the camera when not in use for extended periods.
• Do not store the camera in an area with naphthalene or mothballs.
• During long periods of storage, operate the camera occasionally. When taking the camera out of storage,
check that the camera is functioning properly before using.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD MONITOR CARE
• Although the LCD monitor is manufactured using high precision technology, there may occasionally be a
lack of color or bright points on the LCD monitor.
• Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.
• In a cold environment, the LCD monitor may become temporarily dark. When the camera warms up, the
display will function normally.
• The LCD monitor may be slow to react in low temperatures or may turn dark in a hot environment. When
the camera reaches normal operating temperature, the display will function normally.
• If fingerprints are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth.
OPERATING TEMPERATURES AND CONDITIONS
• This camera has been designed for use in temperatures from 0°C to 40°C (32°F to 104°F).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to
extreme humidity.
• When taking the camera from a cold to a warm environment, place it in a sealed plastic bag to prevent
condensation from forming. Allow the camera to come to room temperature before removing it from the
bag.
BEFORE IMPORTANT EVENTS OR JOURNEYS
• Check the camera’s operation; take test pictures and purchase spare batteries.
• Minolta has no responsibility for any damage or loss incurred by equipment malfunction.
COPYRIGHT
• TV program, films, video tapes, photographs, and other materials may be copyrighted. Unauthorized
recording or duplication of such material may be contrary to copyright laws. Taking pictures or images of
performances, exhibitions, etc., is prohibited without approval and can infringe on copyright. Images
protected by copyright can only be used under the provisions within the copyright laws.
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
108
BATTERIES
• Battery performance decreases with temperature. In cold environments, we recommend keeping spare
batteries in a warm place, such as the inside of a coat. Batteries can recover their power when they warm
up. As the performance of Ni-MH batteries are less affected by temperature, their use is recommended
when shooting in cold environments.
• Remove the batteries when the camera is not in use for an extended period. Leaking battery fluid may
damage the battery-chamber.
• Occasionally, when using alkaline batteries, the battery-condition indicator will give a false low-battery-
power warning, even though there is enough power capacity. Continue to use the camera; the low-battery
indicator will disappear.
• If batteries have been exhausted when used in the camera, do not reload them even if their charge
seems to recover over time. These batteries will interfere with normal camera operation.
COMPACTFLASH CARD CARE AND HANDLING
CompactFlash Cards are manufactured with precision electronic components. The following may cause data loss or
damage:
• Improper use of the card.
• Bending, dropping, or subjecting the card to impact.
• Heat, moisture, and direct sunlight.
• Static electrical discharge or electromagnetic fields near the card.
• Removing the card or interrupting the power supply while the camera or a computer is accessing the card
(reading, writing, formatting, etc.).
• Touching the electrical contacts of the card with your fingers or metal objects.
• Using the card beyond its life. Purchasing a new card periodically may be necessary.
Minolta has no responsibility for any loss or damage to data. It is recommended that a copy of the card data be
made.
QUESTIONS AND SERVICE
• If you have questions about your camera, contact your local camera dealer or write to the Minolta
distributor in your area.
• Before shipping your camera for repair, contact a Minolta Service Facility.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL SPECIFICATIONS
Number of effective pixels:
4.0 million
CCD:
1/1.8-type interline primary-color CCD with a total of
4.1 million pixels.
Camera sensitivity (ISO):
Aspect ratio:
Auto and 64, 100, 200, and 400 ISO equivalents.
4:3
Lens construction:
11 elements in 9 groups including one AD glas
s and two double-sided aspheric elements.
f/3.0 (wide-angle position), f/3.6 (telephoto position)
7.15 - 28.6 mm (35mm equivalent: 35 - 140 mm)
Maximum aperture:
Focal length:
Focusing range (from the CCD): 0.5 m (1.6 ft.) - infinity (wide-angle position)
0.9 m (3.0 ft.) - infinity (telephoto position)
0.16 - 0.6 m (0.5 - 2.0 ft.) in macro mode
Filter diameter:
Autofocusing system:
Shutter:
Shutter speeds:
Built-in flash recycling time:
Viewfinder:
35.5 mm
Video AF
CCD electronic shutter plus mechanical shutter
1/1000 - 4s, bulb (15s maximum)
8s (approx)
Optical real-image zoom viewfinder.
46 mm TFT color
Monitor LCD:
Monitor field of view:
A/D conversion:
Recording media:
File formats:
Approximately 100%
12 bits
Type I CompactFlash cards
JPEG, TIFF, motion JPEG (mov), WAV. DCF 1.0 and
DPOF compliant.
Printing output control:
Menu languages:
Video output:
Exif print, PRINT Image Matching II
Japanese, English, German, French, and Spanish
NTSC and PAL
APPENDIX
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Batteries:
4 AA Ni-MH or alkaline batteries. Ni-MH batteries are
recommended over alkaline.
Battery performance (recording): Approximately 160 frames. Based on Minolta’s stan-
dard test method: 1,850mAh Ni-MH batteries, LCD
monitor on, full-size images (2272 X 1704), standard
image quality, no instant playback, no voice memo,
flash used with 50% of the frames.
Approximately 300 frames: based on Minolta’s stan-
dard test method: 1,850mAh Ni-MH batteries, LCD
monitor off, full-size images (2272 X 1704), standard
image quality, no instant playback, no voice memo,
flash used with 50% of the frames.
Battery performance (playback): Approx. continuous playback time: 120 min. Based
on Minolta’s standard test method: 1,850mAh Ni-MH
batteries, LCD monitor on.
External power source:
AC adapter (AC-1L or AC-2L)
High-power battery pack (EBP-100)
113.5 (W) X 64.5 (H) X 58.5 (D) mm
4.47 (W) X 2.54 (H) X 2.30 (D) in.
Approximately 335g (11.8 0z.)
(without batteries or CompactFlash card)
0° - 40°C
Dimensions:
Weight:
Operating temperature:
Operating humidity:
5 - 85% (noncondensing)
Specifications are based on the latest information available at the time of printing and are subject to change without
notice.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Minolta Customer Support:
www.minoltasupport.com
© 2003 Minolta Co., Ltd. under the Berne Convention
and the Universal Copyright Convention.
0-43325-53187-3
9222-2799-11 PR-A212/ME0302
Printed in Germany
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Indesit Washer Dryer WD 12 S User Manual
Insignia TV DVD Combo NS LTDVD26 09 User Manual
Jabra Projector Accessories SP CEIL 006 User Manual
JVC Car Stereo System Model KD S576 User Manual
JVC Home Theater System LVT2052 002A User Manual
Kenwood Stereo Receiver KRF V7020 User Manual
King Canada Sander KC 706L User Manual
Kingsford Charcoal Grill CBC1042W User Manual
KitchenAid Washer KEDT105W User Manual
Kowa Camera Lens LMVZ3510 IR User Manual