UK
Powerfix
ꢀ
360° Line Laser KH 3006
Operating Manual
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH3006-04/07-V2
Download from Www.Somanuals.com. All Manuals Search And Download.
360° Line Laser KH 3006
• Regularly check the condition of the
batteries. Leaking batteries can cause
damage to the laser appliance.
• If you do not intend to use the laser
appliance for an extended period,
remove the batteries.
• Always change all batteries at the same
time and always use batteries of the
same type.
Read the operating instructions carefully
before using the appliance for the first
time and preserve this booklet for later
reference. Also, give these operating in-
structions to whoever might acquire the
appliance at a future time.
• Clean the battery compartment with
a dry cloth.
Safety instructions
• No liabilty will be accepted for damage
resulting from manipulation to the laser
equipment as well as from disregarding
these safety instructions.
Risk of personal injury!
• Keep and store the appliance out of
the reach of children.
Intended use
This laser appliance contains a Class 2 Laser.
NEVER direct the laser beam at people or
animals. NEVER look directly into the laser.
The laser beam can cause serious eye
damage.
The appliance is intended for use in making
alignments and determining angles in
domestic construction work.
The appliance is intended for domestic
purposes only, not for commercial purposes.
• Do NOT direct the laser beam at strongly
reflective material. Reflected laser beams
are also dangerous.
• In the event of the batteries leaking
acids, wear protective gloves. There is
a risk of receiving chemical burns!
Items supplied
• Laser appliance with rotating plate
• 2 Batteries 1.5 V,
Beware of appliance damage!
• NEVER subject the appliance to rain.
Do not use the appliance in wet or
moist environments.
Type AAA/LR03
• Operating instructions
• Warranty card
• Do not use the appliance at locations
where there is a danger of fire or explo-
sion, e.g. in the vicinity of inflammable
liquids or gases.
Technical Data
Power supply:
• All adjustments intended to increase
the laser power are forbidden.
• To avoid damage to the appliance,
arrange for repairs to be carried out
only by our Customer Services Depart-
ment or qualified specialists.
2 Batteries 1.5 V, Type AAA/LR03
Measurement accuracy:
6,35 mm over 5 meters
Laser class 2
(≤5 mW, λ= 650 nm)
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Appliance description
3. Secure the rotating plate to the wall
y
in that you take both fastening pins
i
Laser appliance
ON/OFF button
from the sides of the appliance and you
press them through the fixing points on
q
w
e
r
t
y
u
i
o
a
s
Spirit level for horizontal lines
Spirit level for vertical lines
Laser lens
Rotating plate with degree scale
Marking arrow
the rotating plate and into the wall
a
(See Fig. ).
Ạ
Notice:
The fastening pins
can be inserted
i
Fastening pins
into most upper surfaces, such as wood,
plaster or mortar. Alternatively, espe-
cially with other upper surfaces, you
could also use adhesive tape for secu-
Fixing points on the laser appliance
Fixing points on the rotating plate
Battery compartment
(on the rear side)
ring the rotating plate
.
y
You can also secure the laser appliance
without the rotating plate, in that
Inserting the batteries
q
the fastening pins
are inserted
i
1. Open the battery compartment
.
s
through fixing points on the laser
2. Insert two batteries of Type AAA/LR03
appliance itself.
o
into the battery compartment . Comply
s
with the polarity markings in the battery
4. Place the laser appliance
onto the
with the
q
compartment
.
s
rotating plate
.
y
3. Close the battery compartment
.
s
5. Turn the laser appliance
q
marking arrow
direction.
6. Switch the laser appliance
into the desired
u
Utilisation
on, by
q
Switching On and Off
pressing the ON/OFF button
.
w
1. To switch the laser appliance
on,
off,
The laser beam appears on the wall in the
q
q
press the ON/OFF
button.
direction of the marking arrow
.
u
w
2. To switch the laser appliance
press the ON/OFF
again.
button once
Plumb-line
w
To mark a plumb-line, turn the laser
appliance
on the rotating plate
q
y
Utilisation on a wall
with the marking arrow
pointing in
u
1. Remove the laser appliance
from
the direction in which the laser marking
q
the rotating plate. The laser appliance
is to be indicated, then finely adjust it
clings to the rotating plate
cally.
magneti-
vertically with the spirit level
.
r
y
2. Place the rotating plate
at the posi-
y
tion on the wall from where you wish
to draw the alignment line.
- 2 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Horizontal line
Storage
To mark a horizontal line, turn the laser
appliance
on the rotating plate
• Keep the fastening pins in the recesses
q
y
i
with the marking arrow
the direction in which the laser marking
is to be indicated, then finely adjust it
pointing in
provided on the sides of the appliance.
• If you are not going to use the appliance
for a long period, remove the batteries
u
horizontally with the spirit level
.
e
from the battery compartment
store them seperately.
and
s
Important:
The air-bubbles in the spirit levels
+
e r
must be positioned between the two
markings.
Disposal
Do not dispose of the appliance in
your normal domestic waste.
Angles
1. To mark an angle, shift the zero marking
of the degree scale to the marking arrow
on the laser appliance
2. Turn the laser appliance from the
(Fig. ).
Dispose of the appliance through an
approved disposal centre or at your
community waste facility.
u
q
ạ
q
start position (Fig. ) with the marking
Ả
arrow to the desired angle (e.g. 45°,
Fig. ).
ả
Observe the currently applicable regula-
tions. In case of doubt, please contact
your waste disposal centre.
u
Utilisation on the floor/on the ceiling
1. Should you use the laser appliance
Disposal of batteries!
q
on the floor or on the ceiling, secure
it as described above if need be.
Do not dispose of batteries with household
waste. All consumers are legally obliged
to dispose of batteries at a collection site
in their community/city district or at a
retail store.
2. Turn the laser appliance
with the
q
marking arrow in the desired direction.
u
This obligation is intended to ensure that
batteries are disposed of in an environ-
mentally safe fashion. Only dispose of
batteries when they are fully discharged.
Cleaning and Care
CAUTION!
Under no circumstances should the
Dispose of the packaging materials
in an environmentally responsible
manner.
laser appliance
be submersed in
q
water or other fluids. The appliance
could be irreparably damaged.
Do not use aggressive detergents or solvents.
They could cause damage to the appliance.
• Clean all components of the appliance
with a soft cloth.
Warranty and Service
The warranty conditions and the service
address can be found on the supplied
warranty card.
• Clean the laser optic
brush.
with a soft
r
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
Importer
KOMPERNASS GMBH
BURGSTRASSE 21
D-44867 BOCHUM
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
|