Kompernass DVD Player KH 6507 User Manual

KH 6507 DVD Player  
Op e ra t in g Ma n u a l  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Co n t e n t s  
2. Notes on safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
3. Use and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
4. Delivery Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
5. Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
General ..................................................................................................................................................................................7  
Video Output .........................................................................................................................................................................7  
Audio Output .........................................................................................................................................................................7  
Digital Audio Output ............................................................................................................................................................7  
6. Components, Operating Elements, Connections and Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
Front of the Device ...............................................................................................................................................................8  
Information on the Display..................................................................................................................................................8  
Rear of the Device ................................................................................................................................................................8  
Remote Control ....................................................................................................................................................................9  
7. Setting Up the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
7.1. Unpacking the Components........................................................................................................................................10  
7.2. Inserting the Batteries into the Remote Control .....................................................................................................10  
7.3. Selecting a Suitable Setup Location for the DVD Player .......................................................................................10  
7.4. Connecting the DVD Player to a Television .............................................................................................................10  
7.4.1. Connecting to a Television via Scart Cable/RGB ..............................................................................................10  
7.4.2. Connecting to a Television via S-Video...............................................................................................................11  
7.4.3. Connecting to a Television via the Video Input (Composite Video)...............................................................11  
7.4.4. Connecting a Television via the Component Signal (YCbCr/Progressive Scan and YUV)......................................12  
7.5. Connecting the DVD Player to a Video Projector...................................................................................................13  
8. Connecting Audio Components to the DVD Player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
8.1. Connecting a HiFi System to the DVD Player .........................................................................................................13  
8.2. Connecting Digital Audio Components to the DVD Player ..................................................................................13  
8.2.1. Connecting via Digital Cable................................................................................................................................13  
8.2.1.1. Connecting via Coaxial Cable ...........................................................................................................................13  
8.2.1.2. Connecting via Optical Cable............................................................................................................................14  
8.2.2. Connecting via Analog Cable ...............................................................................................................................14  
9. Required Settings on the DVD Player Before Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
9.1. Using the OSD Menu...................................................................................................................................................15  
9.2. Language Settings.........................................................................................................................................................15  
9.3. Configuring the Television Display Format...............................................................................................................15  
9.4. Configuring the Television Standard ..........................................................................................................................15  
9.5. Configuring the Video Output / Television Mode ....................................................................................................16  
9.6. Audio Settings ...............................................................................................................................................................16  
9.6.1. Configuring the Analog Output ...........................................................................................................................16  
9.6.2. Configuring the Digital Output ............................................................................................................................17  
9.6.3. Configuring Prologic..............................................................................................................................................17  
9.6.4. Configuring the Dynamic (Dolby Digital)..........................................................................................................17  
9.6.5. Settings for Mono VCDs/S-VCDs........................................................................................................................17  
9.6.6. Setting for HDCD Audio CDs .............................................................................................................................18  
9.6.7. Configuring Nighttime Mode................................................................................................................................18  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.6.8. Speaker Settings .....................................................................................................................................................18  
9.6.9.1. Configuring Speaker Sizes .................................................................................................................................18  
9.6.9.2. Configuring the Distances from the Speaker to the Listener .......................................................................19  
9.6.9.3. Setting the Speaker Volume Level....................................................................................................................19  
9.6.9.4. Playing a Test Sound ...........................................................................................................................................20  
9.7. Activating the Screen Saver ........................................................................................................................................20  
9.8. Activating the Automatic Memory Function ............................................................................................................20  
10. Using the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
10.1. Inserting Discs.............................................................................................................................................................21  
10.2. Inserting Memory Cards with MP3/WMA/JPEG Files.........................................................................................21  
10.2.1. SmartMedia Memory Cards (SM) .....................................................................................................................22  
10.2.2. CompactFlash Memory Cards (CF I/CF II) .....................................................................................................22  
10.2.3. MultiMediaCard/SecureDigital Memory Cards (MMC/SD)..........................................................................22  
10.2.4. MemoryStick Memory Cards (MS) ...................................................................................................................22  
10.3. Playing DVDs/VCDs/S-VCDs ..................................................................................................................................22  
10.4. Playing Audio CDs .....................................................................................................................................................23  
10.5. Playing DVD-R/DVD+R/DVD-RW/DVD+RW/CD-Rs/CD-RWs/Memory Cards with MP3/WMA/JPEG Files..23  
11. General Functions During Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
11.1. Pausing Playback ........................................................................................................................................................24  
11.1.1. Stopping Playback ................................................................................................................................................24  
11.1.1.2. ... with Resume Function ..................................................................................................................................24  
11.1.2.2. ... without Resume Function ............................................................................................................................24  
11.2. Skip ...............................................................................................................................................................................24  
11.3. Fast Forward/Rewind .................................................................................................................................................25  
11.4. Activating Various Playback Modes.........................................................................................................................25  
11.4.1. Repeat Playback...................................................................................................................................................25  
11.4.2. Repeating Sequences (A–B)...............................................................................................................................26  
11.4.3. Random Playback ................................................................................................................................................26  
11.4.4. Using the Bookmark Function ...........................................................................................................................26  
11.4.5. Using the Program Function...............................................................................................................................27  
11.5. Title/Chapter Selection with the Number Buttons.................................................................................................28  
12. Special Functions for DVD/VCD/S-VCD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
12.1. Calling Up the DVD Menu .......................................................................................................................................28  
12.2. Selecting Chapters with the Search Function for DVD ........................................................................................29  
12.2.1. Selecting Chapters by Time Position .................................................................................................................29  
12.2.2. Selecting Chapters by Chapter Number............................................................................................................29  
12.3. Slow Playback Forward/Backward ...........................................................................................................................29  
12.4. Step Function ..............................................................................................................................................................29  
12.5. Zoom In / Out .............................................................................................................................................................29  
12.6. Changing Camera Angles ..........................................................................................................................................30  
12.7. Showing/Hiding Subtitles...........................................................................................................................................30  
12.8. Changing the Playback Language ............................................................................................................................30  
12.9. Displaying Disc Information .....................................................................................................................................30  
13. Special Functions for Audio CD Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
13.1. Displaying Audio CD Information...........................................................................................................................30  
13.2. Selecting Track by Time Position ..............................................................................................................................31  
13.3. Selecting Passages of a Track by Time Position ......................................................................................................31  
13.4. Scan Function ..............................................................................................................................................................31  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. General Audio Functions of the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
14.1. Adjusting the Playback Volume................................................................................................................................31  
14.2. Muting the Sound .......................................................................................................................................................31  
14.3. Adjusting the Dialog Volume....................................................................................................................................31  
14.4. Activating the Equalizer Function ...........................................................................................................................32  
14.5. Activating the Spatializer Function ..........................................................................................................................32  
14.6. Activating the Bass Boost..........................................................................................................................................32  
14.7. Activating the Treble Boost.......................................................................................................................................32  
15. General Video Functions of the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
15.1. Adjusting the Image Quality.....................................................................................................................................32  
16. Other Functions of the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
16.1. Preferences ..................................................................................................................................................................33  
16.2. Using the Sleep Timer Function ...............................................................................................................................33  
16.3. Adjusting the Display Brightness .............................................................................................................................34  
16.4. Activating/Deactivating the Password Check .........................................................................................................34  
16.5. Selecting Your Own Password ..................................................................................................................................34  
16.6. Using the Kid Safe Function .....................................................................................................................................34  
16.7. Resetting the DVD Player to the Factory Settings ................................................................................................35  
16.8. Switching Off the DVD Player .................................................................................................................................35  
17. Cleaning the DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
18. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
19. Glossary/Key Word Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Battery acid may leak from old batteries in particular.  
Remove all batteries from the remote control if you are  
do not use it for a prolonged period of time. This  
protects the remote control against damage from leaking  
battery acid.  
2. No t e s o n sa fe t y  
Danger!  
Do not place the DVD player ...  
Note:  
ô
in locations that are exposed to direct sunlight. Other-  
wise, it may overheat and be irreparably damaged.  
The risk of fire exists!  
Ú
For damage from ...  
opening of the housing of the DVD player and/or  
remote control  
Ú
in the immediate vicinity of heat sources.. This includes  
Ú
ovens, fan heaters and similar devices as well as  
ventilation openings of other electronic devices. Other-  
wise, the DVD player may be irreparably damaged.  
The risk of fire exists!  
repair attempts by unqualified persons  
Ú
use of the DVD player that does not comply with the  
intended use  
Ú
in damp environments. Otherwise, moisture may enter the  
DVD player.This creates the risk of an electrical shock  
and a fire!  
Ú
no liability is accepted or warranty offered!  
The DVD player becomes warm after it is switched on.  
This is no cause for alarm and does not indicate a tech-  
nical problem.  
in the immediate vicinity of water, such as bath tubs  
Ú
or swimming pools. Never place containers filled  
with water (e.g. flower vases) on the DVD player. If  
water flows into the DVD player or the device falls  
into water, the risk of an electrical shock exists!  
Do not place any open flames – such as burning candles  
– on the DVD player. Otherwise, the risk of fire exists!  
Never attempt to repair a defective power cable yourself!  
The risk of electrical shock exists!  
Warning!  
|
Never place other devices or heavy objects (e.g. televi-  
sions) on the DVD player. This could lead to malfunc-  
tions and/or permenant damage to the DVD player!  
Never place the DVD player in locations that are subject to  
heavy shocks or constant vibrations. This could lead to mal-  
functions and/or permenant damage to the DVD player!  
The DVD player and the remote control do not contain  
any parts that can be serviced by the user. If the housing  
of the DVD player and/or remote control are opened,  
the warranty is voided. If repairs are necessary, contact  
one of our service partners in your area. The addresses  
of our service partners can be found in the warranty  
card. This is enclosed with the DVD player.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
For audio playback, the following may be used and  
connected to the Silvercrest KH 6507 DVD player:  
3. Use a n d Fu n ct io n s  
The Silvercrest KH 6507 DVD player is exclusively  
intended ...  
Speakers of a television connected to the  
DVD player.  
Ú
as an electronic entertainment device for playback …  
External audio components such as HiFi systems,  
receivers or surround sound systems (analog/digital).  
Ú
Ú
… of DVD videos in the formats 12 cm (diame-  
ter) and 8 cm (diameter) with the country/region  
ôNote:  
code 2 or  
, labelled with the logo  
.
For damaged caused by use of the DVD player not in  
compliance with the intended use, we accept no liability  
and offer no warranty!  
… the standards DVD, DVD+R, DVD+RW,  
DVD-R and DVD-RW (closed).  
... the video formats MPEG-4/MPEG-4 ASP and  
video data compressed with DivX 3.11, DivX 4.x, 4. De live ry Co n t e n t s  
DivX 5.x, multichannel DivX and DivX Pro  
(DivX Certified Product) as well as Xvid.  
DVD Player  
'
'
'
Infrared remote control  
2 batteries for the remote control,  
type AAA/LR 03/micro  
Audio/video RCA connector cable  
RGB Scart cable  
… at data rates up to 10 Mbit/second.  
… of video CDs (VCDs) and super video CDs  
(S-VCDs).  
'
'
'
This operating manual  
… in the formats 12 cm (diameter) and 8  
cm (diameter), labelled with the logo  
.
5. Te ch n ica l Da t a  
… of audio CDs in the formats 12 cm (diame-  
ter) and 8 cm (diameter), labelled with the logo  
.
Ge n e ra l  
… generally for the file formats CDA (.cda),  
Mains connection:  
AC 230 V~ 50 Hz  
MP3 (.mp3), Windows Media Audio (.wma) and Power consumption :  
15 Watt  
JPEG (.jpg) on the storage media CD-R, CD-  
RW as well as memory cards of types CF I,  
CF II, SD, MS, MSPro, MMC and SM.  
TV standard:  
Operating temperature: 0° C to 40° C  
Humidity:  
Weight :  
PAL/NTSC  
5 ~ 90 % (no condensation)  
2.2 kg  
… for stationary operation indoors.  
… for private, non-commercial use.  
Dimensions (LxWxH): 430 x 268 x 49 mm  
Ú
Ú
Vid e o Ou t p u t  
For the playback of DVDs/VCDs/S-VCDs/audio CDs  
and the file formats MP3 (.mp3), Windows Media  
Audio (.wma) and JPEG (.jpg), the following can be  
connected to the DVD player:  
Output level:  
Horizontal resolution:  
Signal-to-noise ratio:  
1 ± 0.2 VP-p (75 )  
500 lines  
56 dB  
Au d io Ou t p u t  
Stereo and mono televisions with the television for-  
Ú
mats PAL or NTSC and the image formats 4:3 LB,  
4:3 Pan & Scan, 16:9 widescreen.  
Impedance:  
Output level:  
Harmonic distortion:  
Dynamic range:  
Signal-to-noise ratio:  
10 k  
1.8 + 0.2/0.8 Vrms (1kHz, 0dB)  
0.01 % (JIS-A 1kHz, typical)  
80 dB (JIS-A 1 KHz, typical)  
95 dB (JIS-A 1 kHz, typical)  
Video projectors, provided they offer the corre-  
Ú
sponding connection options and the connection of  
a DVD player is intended/permitted by the manu-  
facturer of the video projector.  
Dig it a l Au d io Ou t p u t s  
Coaxial output and optical output  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Co m p o n e n t s, Op e ra t in g Ele m e n t s, Co n n e ct io n s a n d  
Disp la ys  
Fro n t o f t h e De vice  
qPower button (On/ Off)  
wMemory card slot flap  
eDisc tray  
rDisplay  
q
w
e
r
tyu  
button (Open/Close)  
t
y
u
i
o
a
s
/button (Play/Pause)  
button (Stop)  
button (Skip Forward)  
button (Skip Backward)  
button (Search Forward)  
button (Search Backward)  
saoi  
Fig. 1 Front of device  
q
w
e
r
t
y
Information on the Display  
q Display "DVD"  
w Display "DTS"  
e Display "VCD"/"SVCD"  
r Display "Dolby Digital"  
t Display Angel Camera Symbol  
y Display "MP3"  
d sa oi  
u
Fig. 1.1 Information on the display  
u Display title/chapter/file  
i Display "Pause"  
o Display "Repeat"  
a Display "Repeat All"  
s Display "Play"  
d Playback symbol  
Re a r o f t h e De vice  
dRCA socket "Center“  
fRCA socket "SL"  
gRCA socket "FL"  
hSocket "Optical"  
d f g  
h
j
jSocket "Euro Scart"  
kPower cord with plug  
lSocket "Pr/Cr"  
2^ 2% 2$ 2# 2@ 2!  
2) 1(l  
k
Socket "Pb/Cb"  
2)Socket "Y"  
;
Fig. 1.2 Rear of the device  
2!Socket "Coaxial"  
2@RCA socket "FR"  
2#RCA socket "SR"  
2$RCA socket "Subwoofer"  
2%RCA socket "Video"  
2^Socket "S-Video"  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Re m o t e Co n t ro l  
2&Standby button (switch DVD player on/off)  
2*Sleep button (sleep timer function)  
2(Dimmer button (adjust display brightness)  
3)Open/Close button (open/close disc tray)  
3!Number buttons 0/10 bis 9 (input numbers 1-9)  
3@10+ button (input numbers 10-99)  
3#Menu button (show DVD menu)  
3$OK button (confirm entry)  
3%Display button (show disc information)  
3^Digest button (digest function)  
3&Setup button (show OSD menu)  
3*Mark button (bookmark function)  
3(Zoom button (zoom in/out)  
4)Repeat button (repeat playback)  
4!Slow button (slow playback forward/backward.)  
4@Skip– button (skip backward)  
4#Skip+ button (skip forward)  
4$Play button (playback)  
4%Shuffle button (random playback)  
4^Video Out button (set video output TV mode)  
4&Card button (Switch card and DVD inbetween)  
4*3D button (adjust spatializer setting)  
4(Stop button (stop playback)  
5)Pause/Step button (pause playback/step forward)  
5!F.RWD button (fast rewind)  
5@F.FWD button (fast forward)  
5#Vol– button (lower volume)  
5$AB button (repeat sequence)  
5%Vol+ button (increase volume)  
5^Mute button (mute)  
5&PAL/NTSC button (set TV standard)  
5*Program button (show program menu)  
5(Control buttons left/right/up/down  
6)Title button  
Fig. 2 Remote control  
6!CLR button (clear input)  
6@Search button (select time position)  
6#Subtitle button (show subtitles)  
6$Angle button (change camera angle)  
6%Audio button (change playback language)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
in the immediate vicinity of heat sources. This includes  
ovens, fan heaters and similar devices as well as ventila-  
tion openings of other electronic devices. Otherwise, the  
DVD player may be irreparably damaged. The risk of  
fire exists!  
Ú
7. Se t t in g Up t h e DVD Pla ye r  
7.1. Un p a ckin g t h e Co m p o n e n t s  
Remove the DVD player and accessories carefully from  
the packaging. Always hold the DVD player with two  
hands. Never let the DVD player or remote fall! This  
could lead to irreparable damage.  
in damp environments. Otherwise, moisture may enter  
the DVD player.This creates the risk of an electrical  
shock and a fire!  
Ú
Ú
in the immediate vicinity of water, such as bath tubs  
or swimming pools. Never place containers filled  
with water (e.g. flower vases) on the DVD player. If  
water flows into the DVD player or the device falls  
into water, the risk of an electrical shock exists!  
7.2. In se rt in g t h e Ba t t e rie s in t o t h e  
Re m o t e Co n t ro l  
1
Open the battery compartment on the back side of  
the remote control.  
Do not place any open flames – such as burning candles  
– on the DVD player. Otherwise, the risk of fire exists!  
2
Remove the protective film from the two batteries of  
type AAA/LR03/micro included with the DVD player.  
Then insert both batteries into the battery compart-  
ment. Be sure to insert the batteries with the correct  
polarity.The correct polarity is indicated inside the bat-  
tery compartment.  
Warning!  
|
Never place other devices or heavy objects (e.g. televi-  
sions) on the DVD player. This could lead to malfunc-  
tions and/or permenant damage to the DVD player!  
3
Put the battery compartment cover back in place.  
Never place the DVD player in locations that are subject to  
heavy shocks or constant vibrations. This could lead to  
malfunctions and/or permenant damage to the DVD player!  
ôNote:  
To ensure faultless functioning of the remote control:  
7.4. Co n n e ct in g t h e DVD Pla ye r t o a  
Te le visio n  
Always point the remote control directly at the DVD  
player when using it.  
Ú
Ú
Ú
After setting up the DVD player, you can now connect it to  
a television.The DVD player can be connected to televi-  
sions with the television standards PAL, NTSC and multi-  
standard televisions.  
Remain within 5 meters of the DVD player when  
using the remote control.  
Make certain that no objects obstruct the reception be-  
tween the remote control and the DVD player.  
ôNote:  
Otherwise, the remote control may function improperly.  
The DVD player does not function with televisions of  
the television standard SECAM.  
7.3. Se le ct in g a Su it a b le Se t u p Lo ca -  
t io n fo r t h e DVD Pla ye r  
Depending on the features of the television, there are  
various options for connecting the DVD player to it:  
Place the DVD player on a flat, level, scratch-proof and  
slip-proof surface.  
7.4.1. Connecting to a Television via Scart-  
Cable/RGB  
Danger!  
ôNote:  
Do not place the DVD player ...  
Connecting the television with a Scart-cable via the RGB  
input is the connection option that offers the highest quality.  
Select this connection option if the television has an RGB  
input. In case of doubt, consult the operating manual of the  
television.  
in locations that are exposed to direct sunlight. Other-  
wise, it may overheat and be irreparably damaged.The  
risk of fire exists!  
Ú
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To connect the DVD player to a television with a Scart  
cable:  
5
6
Insert the red plug of the audio/video RCA cable into  
the RCA socket FR on the DVD player.  
1
2
Insert the supplied Scart cable into the socket on  
the DVD player labelled with Euro Scart.  
Insert the second red plug of the audio/video RCA  
cable into the RCA socket for the right channel on  
the television.  
Insert the Scart cable into the Scart socket of the  
television.  
Fig. 4 Connecting a television via S-video  
7
Set the television to the AV channel that displays  
the S-video signal. Consult the operating manual of  
the television if you are unsure how to do this.  
Check in the operating manual of the television  
whether additional settings must be configured on  
the television.  
Fig. 3 Connecting a television via Scart cable / RGB  
3
Set the television to RGB mode in the AV channel.  
In case of doubt, consult the operating manual of  
the television for instructions.  
On this topic, also refer to Section 9.5. "Configuring  
the Video Output/ TV Mode".  
On this topic, also refer to Section 9.5. "Configuring  
the Video Output / TV Mode".  
Ô
Ô
7.4.2. Connecting to a Television via S-Video  
7.4.3. Connecting to a Television via the  
Video Input (Composite Video)  
ôNote:  
If the television to which you would like to connect the  
DVD player …  
For this type of connection, the television must have an S-  
video input and two unused RCA sockets. In case of  
doubt, consult the operating manual of the television. You  
also require an S-video cable, as none is supplied. S-video  
cables are available in audio/video stores.  
does not have an S-video input and  
Ú
does not have a Scart socket, but does have RCA  
sockets  
Ú
To connect the DVD player to a television via S-video:  
you can connect the DVD player to the television via  
the video input. This connection option is referred to as  
composite video. To do this:  
1
2
3
Plug the S-video cable into the S-video socket on  
the DVD player.  
Plug the other end of the S-video cable into the  
S-video socket on the television.  
1
2
3
Pick up the included audio/video RCA cable. Insert  
the yellow plug of the audio/video RCA cable into  
the video socket on the DVD player.  
Pick up the included audio/video RCA cable. Insert  
the white plug of the audio/video RCA cable into  
the RCA socket FL on the DVD player.  
Insert the second yellow plug of the audio/video  
RCA cable into the corresponding RCA socket on  
the television.  
4
Insert the second white plug of the audio/video  
RCA cable into the RCA socket for the left  
channel on the television.  
Insert the white plug of the audio/video RCA cable into  
the RCA socket FL on the DVD player.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Insert the second white plug of the audio/video  
RCA cable into the RCA socket for the left chan-  
nel on the television.  
For both variants – YCbCr/YPbPr and YUV – you require:  
the included audio/video RCA cables and  
Ú
5
6
Insert the red plug of the audio/video RCA cable into  
the RCA socket FR on the DVD player.  
two additional audio/video RCA cables. These are  
available in audio/video stores.  
Ú
Insert the second red plug of the audio/video RCA  
cable into the RCA socket for the right channel on  
the television.  
To connect the DVD player to a television via component  
video:  
1
On the rear side of the DVD player, you will find  
three coloured component out sockets Y, Pb/Cb and  
Pr/Cr. Insert the red plug of the included  
audio/video RCA cable into the RCA socket Pr/Cr.  
2
Insert the second red plug of the audio/video RCA  
cable into the component video IN socket Pr/Cr on  
the television.  
3
4
Insert the white plug of the audio/video RCA cable into  
the RCA socket Pb/Cb on the DVD player.  
Insert the second white plug of the audio/video  
RCA cable into the component video IN socket  
Pb/Cb on the television.  
Fig. 5 Connecting a television via composite video  
7
Check in the operating manual of the television  
whether additional settings must be configured on  
the television.  
5
6
Insert the yellow plug of the audio/video RCA cable into  
the RCA socket Y on the DVD player.  
On this topic, also refer to Section 9.5. "Configuring  
the Video Output / TV Mode".  
Insert the second yellow plug of the audio/video  
RCA cable into the corresponding component  
video IN socket Y on the television.  
Ô
7.4.4. Connecting a Television via the Com-  
ponent Signal (YPb/CbPr/CR/Progres-  
sive Scan and YUV)  
7
8
9
Pick up the two additional RCA cables. Insert the  
white plug of the RCA cable into the RCA socket  
FL on the DVD player .  
The YPb/CbPr/Cr sockets of the DVD player output  
so-called "component signals". The component signals  
are available in the form of …  
Insert the second white plug of the audio/video  
RCA cable into the RCA socket for the left chan-  
nel on the television.  
"YUV" signals (interlaced) and in the form of  
Ú
Insert the red plug of the audio/video RCA cable  
into the RCA socket FR on the DVD player.  
"YCbCr" signals (full images/progressive scan).  
Ú
On this topic, refer to Section 19. "Glossary /  
Key Word Index".  
10 Insert the second red plug of the audio/video RCA cable  
into the audio socket for the right channel on the televi-  
sion.  
Ô
The cabling for YCbCr/YPbPr/progressive scan and  
YUV is identical. For both connection options, the tele-  
vision must have two unused RCA sockets.  
For YCbCr/YPbPr/progressive scan, the television (or  
video projector) must possess the progressive scan  
function. In case of doubt, consult the operating manual  
of the television (or video projector).  
Fig. 6 Connecting a television via component video  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11 Check in the operating manual of the television  
whether additional settings must be configured on  
the television.  
4
Insert the second red RCA cable plug into the RCA socket  
for the right channel on the HiFi system.  
On this topic, also refer to Section 9.5. "Configuring  
the Video Output/ TV Mode".  
Ô
7.5. Co n n e ct in g t h e DVD Pla ye r t o a  
Vid e o Pro je ct o r  
You can also connect the DVD player to a video pro-  
jector instead of a television. Check the operating  
manual of the video projector to determine which of  
the described connection options are available. Any  
additional cables required can be obtained from  
audio/video stores.  
Fig. 7 Connecting a HiFi system via RCA cables  
5
Check in the operating manual of the HiFi system  
whether additional settings are required for connec-  
tion to a DVD player.  
8.  
Co n n e ct in g Au d io Co m p o -  
n e n t s t o t h e DVD Pla ye r  
ôNote:  
Instead of the television speakers, the sound can also be  
played back by external audio components. To accom-  
plish this, HiFi systems, Dolby Digital/DTS receivers or  
surround sound systems can be connected to the DVD  
player. You have the following options here:  
For optimal sound: Place the speakers of your HiFi  
system to the left and right of the television.  
If you have connected the DVD player to the television  
with a Scart cable: The audio signals are transmitted to  
the HiFi system over the RCA cables and to the televi-  
sion over the Scart cable. In this case, set the volume of  
the television to the lowest value.  
8.1. Co n n e ct in g a HiFi Syst e m t o t h e  
DVD Pla ye r  
Before connecting, check in the operating manual of  
the HiFi system …  
8.2. Co n n e ct in g Dig it a l Au d io Co m p o -  
n e n t s t o t h e DVD Pla ye r  
whether the HiFi system is suitable for connection  
Ú
to a DVD player.  
Digital audio components can be connected to the DVD play-  
er either via digital or analog cables.  
whether the HiFi system has RCA sockets. If this is  
the case, you can connect the HiFi system to the  
DVD player with RCA cables.  
Ú
ôNote:  
The cables required for the connection options described  
below are available at audio/video stores.  
ôNote:  
If the audio/video RCA cable included with the DVD player 8.2.1. Co n n e ct in g via Dig it a l Ca b le  
is already in use, you will need additional RCA cables. These  
are available in audio/video stores.  
Check in the operating manual of the digital audio  
component whether it can be connected to the DVD  
player …  
To connect a HiFi system:  
1
2
Insert the white RCA cable plug into the RCA sok-  
ket FL on the DVD player.  
via a coaxial cable or  
via an optical cable  
Ú
Ú
Insert the second white RCA cable plug into the  
RCA socket for the left channel on the HiFi  
system.  
If both options are available, you can freely decide  
which connection option you prefer.  
3
Insert the red RCA cable plug into the RCA  
socket FR on the DVD player.  
8.2.1.1. Connecting via Coaxial Cable  
1
Insert the plug of the coaxial cable into the coaxial  
socket on the DVD player.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Insert the second plug of the coaxial cable into the  
corresponding socket of the digital audio compo-  
nent.  
1
Insert one RCA plug each into …  
the FL socket  
the FR socket  
the SL socket  
the SR socket  
the Center socket and  
the Subwoofer socket  
Ú
Ú
Ú
Ú
Ú
Ú
on the rear side of the DVD player.  
Fig. 8 Connecting a HiFi system via coaxial cable  
8.2.1.2. Connecting via Optical Cable  
1
2
3
Pull off the protective cover over the optical socket  
of the DVD player.  
Fig. 10 Connecting a HiFi system via analog cables  
Then insert the plug of the optical cable into the  
optical socket of the DVD player.  
2
Insert the RCA cables into the corresponding RCA  
sockets of the digital audio component.  
Insert the second plug of the optical cable into the  
corresponding socket of the digital audio compo-  
nent.  
9. Re q u ire d Se t t in g s o n t h e DVD  
Pla ye r Be fo re Use  
All settings on the DVD player can be configured with  
the remote control in the "On-Screen Display Menu".  
This is displayed on the television screen and is referred  
to below as the OSD menu.  
Before using the DVD player for the first time, you must  
configure a few settings in this menu.  
To be able to configure the required settings via the  
menu:  
1
2
Plug the power cable of the DVD player into a power  
socket  
Fig. 9 Connecting a HiFi system via optical cable  
Note:  
To switch on the DVD player, press the Power button  
on the front side of the DVD player.  
ô
When connecting the optical cable, dust must not be  
allowed into the optical socket. This could disrupt the  
optical signal and cause malfunctions. Place the protecti-  
ve cover back onto the socket when you disconnect the  
optical cable!  
If the DVD player is already on, but is currently in  
standby mode: Press the standby button on the remo-  
te control once to switch on the DVD player.  
The display of the DVD player first displays "Hello",  
then "Loading" and finally "NoDisc". "No Disc" is  
displayed on the television screen.  
8.2.2. Connecting via Analog Cable  
3
Familiarise yourself with the operation of the OSD  
menu with the brief instructions below:  
If the digital audio component does not have a digital  
input: Connect the digital audio component to the  
DVD player via RCA cables. To do this:  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9.1. Using the OSD Menu  
b
To hide the OSD menu: Press the Setup button again  
or select the main menu item Exit Setup Menu.  
To call up the OSD menu of the DVD player:  
1
Press the Setup button on the remote control once.  
The OSD menu is displayed on the television screen.  
In the bar at the top of the OSD menu, you will see  
six symbols. The symbols – from left to right – stand  
for the main menu items …  
9.2. Language Settings  
1
Select the main menu item General Setup Page and  
the submenu item OSD Language.  
2
Select the language in which the OSD menu should  
be displayed.  
"General Setup Page"  
"Audio Setup Page"  
"Video Setup Page"  
"Preference Page" and  
"Password Setup Page".  
Ú
Ú
Ú
Ú
Ú
The following languages are available:  
German  
English  
Spanish  
Ú
Ú
Ú
The sixth symbol stands for "Exit Setup Menu".  
Portuguese  
Ú
The symbol of the currently selected main menu item 9.3. Configuring the Television Display  
is displayed with a coloured circle. Initially, the main  
menu item General Setup Page is displayed with its  
submenu items.  
Form at  
1
2
Select the main menu item General Setup Page and  
the submenu item Screen Type.  
Select the display format of the television connected to  
the DVD player. The following options are available:  
• • GENERAL SETUP PAGE • •  
SCREEN TYPE  
ANGLE DISPLAY  
OSD LANGUAGE  
CAPTIONS  
PS  
4:3 Pan Scan  
ON  
GER  
OFF  
OFF  
OFF  
When playing films in the format 16:9, the left and right  
edges of the image are cut off. This makes the most pos-  
sible use of the screen height.  
SCREEN SAVER  
LAST MEMORY  
4:3 Letterbox  
GOTO GENERAL SETUP PAGE  
Fig. 11 OSD menu overview  
When playing films in the format 16:9, black bars can be  
seen along the top and bottom edges of the screen.  
2
You can select the individual menu items with the  
control buttons on the remote control. The currently  
16:9  
selected menu item is displayed highlighted in yellow. Television display format for widescreen televisions.  
To the right of the currently selected menu item, the  
list of available options is displayed. You can switch  
from the selected menu item to the list of available  
options by pressing the OK button. The currently  
selected option will then be shown highlighted in yel-  
low.  
When playing films in the format 16:9 with 16:9 (1.78:1)  
widescreen televisions, no black bars are seen on the top  
and bottom edges of the screen and the left and right  
edges of the image are not cut off.  
9.4. Configuring the Television Standard  
3
You can switch between the available options by  
pressing the control buttons up/down. To select the  
desired option: Press the OK button once the option  
is highlighted in yellow.  
1
Select the main menu item Preference Page and the  
submenu item TV System.  
2
Select the television standard of the television  
connected to the DVD player:  
4
a
When you have completed configuring the desired  
settings, you have the following options:  
Auto  
If you would like to configure additional settings in  
other submenus: Press the left control button until  
you can once again switch between the main menu  
items with the left/right control buttons.  
With this setting, the standard with which the  
DVD/VCD/S-VCD was recorded is selected automatical-  
ly. Only set Auto if you have connected the DVD player  
to a multi-standard television.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PAL  
3
Select the submenu item TV Mode. If the DVD player is  
connected to the television via the YCbCr (progressive  
scan) connection option: In this case, select the option P-  
SCAN. If the DVD player is not connected to the televi-  
sion via the YCbCr connection option: Select the option  
Interlace.  
With this setting, DVDs/VCDs/S-VCDs recorded with  
the PAL standard are played. DVDs/VCDs/S-VCDs  
that were recorded with the NTSC standard are auto-  
matically converted and played in the PAL format. Set  
PAL if you have connected the DVD player to a PAL  
television.  
ôNote:  
NTSC  
If you have selected an incorrect video output, the televi-  
sion screen may suddenly go black. This is not a defect  
of the television or the DVD player! In such a case: Press  
the Video Out button until an image once again appears  
on the television screen.  
With this setting, DVDs/VCDs/S-VCDs recorded with  
the NTSC standard are played. DVDs/VCDs/S-VCDs  
that were recorded with the PAL standard are automa-  
tically converted and played in the NTSC format. Set  
NTSC if you have connected the DVD player to an  
NTSC television.  
9.6. Au d io Se t t in g s  
9.6.1. Configuring the Analog Output  
ôNote:  
1
2
3
Select the main menu item Audio Setup Page, then the  
submenu item Speaker Setup.  
The correct setting depends on the television to which  
you would like to connect the DVD player. In most  
cases, your television will correspond to the typical  
television standard for your country, unless you pur-  
chased it in a different country.  
In the Analog Setup menu, select the submenu item  
Downmix.  
Select one of the options …  
If you are not certain which television standard is typical  
in your country, consult the operating manual of the tele- LT/RT  
vision.  
Select this option if you …  
On this topic, refer to Section 19. "Glossary /  
Key Word Index".  
Ô
have connected a HiFi system (and a subwoofer) to  
the DVD player.  
Ú
9.5. Co n fig u rin g t h e Vid e o Ou t p u t /  
Te le visio n Mo d e  
have connected a surround sound system to the  
DVD player and would like to use only its front  
speakers and the subwoofer.  
Ú
1
Select the main menu item Video Setup Page, then  
the submenu item Video Output.  
STEREO:  
2
Select one of the three options available here:  
Select this option if you …  
OFF  
have connected the DVD player to a stereo televi-  
sion and have not connected any audio components  
to the DVD player or  
Ú
Select this setting if the DVD player was not connected  
to the television via Scart cable or component video.  
YUV  
have connected a Dolby Prologic-compatible amplifier,  
Ú
receiver or HiFi system via the analog stereo output  
(with RCA cable to the RCA cable sockets FL and FR)  
of the DVD player.  
Select this setting if the DVD player is connected via  
component video YUV.  
RGB  
Otherwise, the sound will be inaudible or very quiet  
during disc playback!  
Select this setting if the DVD player is connected to an  
RGB-capable television via the 21-pin Scart cable.  
V Surr  
If you select this option, the DVD player will simulate  
surround sound with the audio playback.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OFF  
On  
Disable the DOWNMIX and enable the 5.1ch function. At the condition of DOWNMIX is setup to OFF, could  
setup the PRO LOGIC II.When you select ON, it means that  
9.6.2. Configuring the Digital Output  
2ch audio could be dummy as 5.1ch, multispeaker could be  
hard such as VCDs, S-VCDs, MP3.  
1
2
3
Select the main menu item Audio Setup Page, then the  
submenu item SPDIF Setup.  
OFF  
In the Digital Output Setup Page, select the sub-  
menu item SPDIF Output.  
Select Off, it means that PROLOGIC II does not work.  
On this topic, also refer to Section 9.6.9.1. "Confi-  
guring the Speaker Sizes“.  
Ô
Choose between the options …  
SPDIF Off  
9.6.4. Configuring the Dynamic (Dolby  
Digital)  
Select SPDIF Off if you have not connected any  
digital audio components to the DVD player.  
To balance out the volume differences between loud  
and soft passages during playback of Dolby Digital  
sound:  
SPDIF/RAW  
Select SPDIF/RAW if you have connected a multi-  
channel digital audio component – such as a Dolby  
Digital or DTS receiver or a 5.1 channel surround  
sound system – to the DVD player via an optical or  
coaxial cable.  
1
2
3
Select the main menu item Audio Setup Page, then the  
submenu item Dolby Digital Setup.  
In the Dolby Digital Setup menu, select the subme-  
nu item Dynamic.  
SPDIF/PCM  
Use the control buttons to set a value between Off  
and Full.  
Select "SPDIF/PCM" if you have connected a two-  
channel digital audio component to the DVD player via 9.6.5. Settings for Mono VCDs/S-VCDs  
an optical or coaxial cable.  
ôNote:  
Manual  
These settings are only relevant for playing VCDs/S-  
Select Manual if you would like to configure the above VCDs. The sound on VCDs/S-VCDs may be available as  
settings separately for CDs, Dolby Digital, DTS and  
MPEG and not have them apply generally. After you  
have selected Manual: In the Digital Output Setup  
Page, select the submenu items CD, Dolby Digital,  
DTS and MPEG in turn. For each item, select one of  
the options SPDIF Off, SPDIF/RAW, SPDIF/PCM  
only. Then select the submenu item LPCM output.  
Choose between the sampling frequencies 48 kHz and  
96 kHz.  
1-language in stereo or  
Ú
2-language in mono  
Ú
1
2
3
In the Audio Setup Page, select the submenu item  
Dolby Digital Setup.  
9.6.3. Configuring Prologic  
In the submenu Dolby Digital Setup, select the  
submenu item Dual Mono.  
1
2
3
Select the main menu item Audio Setup Page, then  
the submenu item SURROUND.  
For mono VCDs/S-VCDs, select one of the options  
In the 3D Processing Page, select the submenu item  
ProLogic II.  
Choose between the options …  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STEREO:  
1
2
In the Audio Setup Page, select the submenu item  
SPEAKER SETUP.  
In the Analog Setup submenu, select the submenu  
item POST DRC. Here you can configure the Night-  
time Mode for playing DVDs. This mode can be use-  
ful if you wish to watch a DVD at night.  
You will hear the first language from the front left and the  
second language from the front right speaker.  
L-MONO:  
You will hear the first language from the front  
left and right speakers.  
3
Select one of the options On, Off or Auto.  
R-MONO:  
9.6.8. Speaker Settings  
You will hear the second language from the front  
left and right speakers.  
ôNote:  
MIX-MONO:  
You will hear both languages respectively from the  
front left and front right speakers.  
The steps described below only refer to the connection of  
the DVD player to an audio component via analog  
cables. If you have selected one of the digital connection  
options …  
9.6.6. Setting for HDCD Audio CDs  
connection via coaxial cable or  
Ú
ôNote:  
connection via optical cable,  
Ú
These settings are only relevant for the playback of  
audio CDs encoded according to the HDCD system.To  
make use of the advantages of HDCD, the HDCD filter  
of the DVD player must be activated.How to activate/  
deactivate this filter is described in the following steps.  
you do not have to configure the speaker settings described  
below on the DVD player, but rather on the respective  
audio component. Consult the operating manual of this  
audio component for information on how to configure the-  
se settings.  
1
2
In the Audio Setup Page, select the submenu item  
HDCD.  
For optimal sound, it is necessary to adapt the audio  
playback to …  
Choose between the options …  
the connected audio components,  
Ú
Off  
Select Off if you do not want to play HDCD audio  
CDs with the DVD player. With this setting, the  
HDCD filter of the DVD player is deactivated.  
the spatial conditions at the location of the DVD  
player / audio components and  
Ú
your personal preferences.  
Ú
On  
Select On if you want to play HDCD audio CDs with the  
DVD player.With this setting, the HDCD filter of the  
DVD player is activated.  
9.6.9.1. Configuring Speaker Sizes  
9.6.7. Configuring Nighttime Mode  
To configure the speaker settings if you have connected  
the DVD player to an audio component via analog  
cable:  
ôNote:  
When you lower the playback volume with the volume  
buttons, this affects all 6 audio channels. In other words,  
the volumes of background noises as well as music and  
dialogue are all lowered equally. In nighttime mode,  
however, only the playback volume of background  
noises, music, etc. is lowered. This makes the dialogue  
remain clearly audible even at a low playback volume.  
1
2
In the Audio Setup Page, select the submenu item  
SPEAKER SETUP.  
In the Analog Setup Page, select all speakers in  
turn:  
Front  
Select the option ...  
Large, if large speakers are connected for the front audio  
channels on the audio component.  
Ú
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Small, if small speakers are connected for the front audio  
channels on the audio component.  
Ú
• • AUDIO SETUP PAGE• •  
Center  
Select the option ...  
SPEAKER SETUP  
SPDIF SETUP  
Large, if a large center speaker is connected to the  
audio component.  
DOLBY DIGITAL SETUP  
Ú
Ú
Ú
CHANNEL DELAY  
CHANNEL TRIM  
Small, if a small center speaker is connected to the  
audio component.  
EQUALIZER  
SURROUND  
HDCD  
Off, if you would like to deactivate the audio channel  
for the center speaker or no center speaker is connec-  
ted to the audio component  
CENTER  
Fig. 12 Audio setup menü  
Enter the distance values for all speakers here. The  
distance values to be entered are calculated according  
to the following formulas:  
Rear  
Select the option ...  
Distance for center speaker = distance of the left/right  
front speaker to the listening position - distance of the  
center speaker to the listening position  
Ú
Large, if large rear speakers are connected to the  
audio component.  
Ú
Ú
Ú
Small, if small rear speakers are connected to the  
audio component.  
Distance for the left/right rear speakers = distance  
Ú
of the left/right front speaker to the listening posi-  
tion - distance of the left/right rear speaker to the  
listening position  
Off, if you would like to deactivate the audio channels  
for the rear speakers or no rear speakers are connected  
to the audio component.  
Distance for subwoofer = distance of the left/right front spea-  
ker - distance of the subwoofer to the listening position  
Ú
Subw oofer  
Select the option ...  
3
Press the OK button once. Initially, the center speaker is  
selected, as can be seen in the yellow marking on the  
screen. Press the left/right control buttons to select the  
distance from the center speaker to the listener.You can  
set the distance between 0 and 170 cm. Press the OK but-  
ton once the correct distance is displayed.  
On, if a subwoofer is connected  
to the audio component.  
Ú
Ú
Off, if you would like to deactivate the audio chan-  
nel for the subwoofer or no subwoofer is connected  
to the audio component.  
4
Now press the up/down control buttons to select the  
additional speakers and the subwoofer.The selected  
speaker will be highlighted in yellow on the screen.  
Press the OK button once the correct distance is  
displayed for each speaker.  
ôNote:  
If you have selected the option Off under Center, Rear  
and Subwoofer, the audio playback takes place only on  
two channels (stereo).  
9.6.9.3. Setting the Speaker Volume Level  
1
In the Audio Setup Page, select the submenu item Channel  
Trim.The following screen is displayed:  
9.6.9.2. Configuring the Distances from the  
Speaker to the Listener  
For an optimal sound experience, the distance from the  
speakers to the listern should be configured correctly. If  
the distances are configured correctly, the sound from  
all speakers should reach the listener position at the  
same time. To do this:  
1
2
Measure and record the distances from all speakers  
to the listening position.  
In the Audio Setup Page, select the submenu item Chan-  
nel Delay.The following screen is displayed:  
LEFT  
Fig. 13 Adjusting the speaker volume  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
3
Initially, the left volume control for the front left  
speaker is selected. Press the up/down control but-  
tons to set the volume level between 10 and -10 dB.  
The audio channel that should currently be playing the  
test sound is indicated at the bottom of the OSD menu.  
4
To deactivate the test sound, select the option Off.  
Then press the left/right control buttons to select  
the other speakers. The currently selected speaker  
is indicated at the bottom of the screen. Set the de-  
sired volume levels here as well.  
9.7. Act iva t in g t h e Scre e n Sa ve r  
ôNote:  
4
Once you have set the volume levels, press the OK  
button. The screen disappears.  
The screen saver prevents images displayed for long  
periods from being burned into the television screen.  
When the screen saver is activated, it is automatically  
displayed as soon as …  
ôNote:  
If you are not certain which value is right for you, configure  
this setting from your listening position while playing a  
DVD/VCD/S-VCD. Test all the settings until you have  
found one that sounds best to you.  
OSD menu is displayed on the screen for an ex-  
tended period of time and  
Ú
no button is pressed on the remote control / DVD  
player during this time.  
Ú
9.6.9.4. Playing a Test Sound  
We recommend activating the screen saver.To do this:  
To test the audio settings for the playback of 5.1 channel  
surround sound, the DVD player has a test sound. To  
activate the test sound:  
1
2
Select the main menu item General Setup Page and  
the submenu item Screen Saver.  
ôNote:  
Select the option On to activate the screen saver.  
Select the option Off to deactivate the screen saver.  
The test sound can only be activated if ...  
9.8. Act iva t in g t h e Au t o m a t ic Me m o ry  
Fu n ct io n  
in the Analog Output Setup Page, the submenu item  
Downmix is set to off  
Ú
ôNote:  
and no disc is inserted into the DVD player.  
Ú
This function is not available for all discs!  
1
Select the main menu item Audio Setup, then the  
submenu item SPEAKER SETUP.  
The DVD player has an automatic  
memory function. If it is activated, ...  
2
3
In the Analog Output Setup Page, select the  
submenu item Test Tone.  
the DVD player "remembers" the last disc played.  
Ú
Select the option On. Do not close the OSD menu  
while the test sound is playing. The test sound can  
be heard as a static on each of the connected speak-  
ers in turn. It is output to the audio channels in the  
order ...  
the DVD player saves the point at which playback  
of the disc was interrupted.  
Ú
If the disc is inserted back into the DVD player, the  
playback is continued from the saved point.  
Left (front left speaker)  
To activate the automatic memory function:  
Ú
Ú
Ú
Ú
Ú
Center (center speaker)  
1
2
Select the main menu item General Setup Page and  
the submenu item Last Memory.  
Right (front right speaker)  
Right Surr (rear right speaker)  
Left Surr (rear left speaker)  
Choose between the options On and Off.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
The contents of the inserted disc are now loaded;  
this may take a few seconds. "Loading" is displayed  
on the television screen during this process.  
10. Usin g t h e DVD Pla ye r  
After you have …  
10.2. In se rt in g Me m o ry Ca rd s w it h  
MP3/WMA/JPEG File s  
set up the DVD player at a suitable location  
Ú
Ú
To insert memory cards of types CF I/CF II, SD,  
MS/MSPro, MMC and SM into the DVD player:  
connected the DVD player to a television (or a  
video projector) using one of the described  
connection options  
1
2
Switch on the television connected to the DVD  
player.  
connected the DVD player to a HiFi or surround  
sound system (analog/digital) or a Dolby Digital or  
DTS receiver, if desired  
Ú
Make certain that the DVD player is ready for op-  
eration and switched on.  
inserted the batteries into the remote control  
If the television, the DVD player and any additionally con-  
nected equipment (e.g. an audio component) are ready for  
operation and switched on and the DVD player is correct-  
ly connected to the television, you will see the OPENING  
logo on the television screen.  
Ú
Ú
and know how to access and use the setup menu  
with the remote control …  
… the DVD player is ready for operation.  
10.1. In se rt in g Discs  
If no disc is present in the disc tray of the DVD  
player: "No Disc" is displayed on the television  
screen.  
To play a disc with the DVD player:  
3
4
Open the flap in front of the memory card slot on the  
front side of the DVD player. To do this, press once  
with your finger on the dotted triangle on the flap. The  
flap opens.  
1
2
Switch on the television connected to the DVD  
player.  
Make certain that the DVD player is ready for  
operation and switched on.  
Now slide the memory card into one of the two  
memory card slots. Follow the steps below – depen-  
ding on which type of memory card you would like  
to play.  
If the television, the DVD player and any addition-  
ally connected equipment (e.g. an audio compo-  
nent) are ready for operation and switched on and  
the DVD player is correctly connected to the televi-  
sion, you will see the OPENING logo on the televi-  
sion screen.  
Upper slot  
Low er slot  
If no disc is present in the disc tray of the DVD  
player: "No Disc" is displayed on the television  
screen.  
3
4
5
Open the disc tray by pressing the Open/Close but-  
ton once. "OPEN" is displayed on the television  
screen.  
Fig. 14 Memory card slots  
Warning!  
|
Place a disc on the disc tray with the printed/label  
side facing up. For double-sided discs: The side you  
would like to play must face down.  
Always be sure to insert the memory cards into the  
memory card slots as described below! Never bend the  
memory cards while inserting them into the memory  
cards slots! Only push the memory cards up to the stop in  
the memory card slot with a light pressure. If memory  
After you have placed the disc in the disc tray:  
Press the Open/Close button again to close the disc cards cannot be inserted without applying force:  
tray.  
Check whether it is a type of memory card that the DVD  
Ú
player can play. Only memory cards of types CF I/CF II,  
SD, MS/MSPro, MMC and SM can be played. Do not  
try to insert memory cards of other types into one of  
the memory card slots!  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Check whether you have inserted the memory card into  
the memory card slot in the correct direction.  
the side of the memory card that contains the con-  
tacts must face up and  
the angled corner of the memory card points to the left.  
Ú
Ú
Ú
Ú
Never try to insert memory cards into the memory  
card slots using force!  
10.2.4. MemoryStick Memory Cards (MS)  
This could result in irreparable damage to the DVD player,  
memory card and the files on the memory card!  
Memory Stick memory cards must be inserted into the  
bottom memory card slot. Insert MS memory cards with  
the contacts first and slide them straight into the bottom  
memory card slot. It is essential that …  
ôNote:  
Always be sure to pull the memory card at the stop mode  
the side of the memory card that contains the con-  
tacts must face up and  
Ú
10.2.1. SmartMedia Memory Cards (SM)  
the angled corner of the memory card points to the left.  
Ú
ôNote:  
5
Once the memory card is correctly inserted into the  
memory card slot, the red indicator light next to the  
bottom slot lights up.  
Only SmartMedia memory cards of type 3.3 V can be used!  
SmartMedia memory cards of type 5 V cannot be used!  
SmartMedia memory cards of types 3.3 V and 5 V can easi-  
ly be differentiated according to the diagram below:  
6
Press the Card button to display the memory con-  
tents.  
5 V  
3.3 V  
10.3. Pla yin g DVDs/VCDs/S-VCDs  
ôNote:  
DVDs/VCDs/S-VCDs generally have a region code that  
is printed on their cases. The DVD player can only play  
DVDs/VCDs/S-VCDs with ...  
Fig. 15 Differences betw een SM memory cards  
the region code 2 or  
Ú
SmartMedia memory cards (3.3 V) must be inserted into  
the bottom memory card slot. Insert SM memory cards  
with the contacts first and slide them straight into the  
bottom memory card slot. It is essential that …  
the symbol  
Ú
If no region code is printed on the case of a  
DVD/VCD/S-VCD, it may not be possible to play it. In  
this case, this is not a malfunction of the DVD player.  
the side of the memory card that contains the con-  
tacts must face down and  
Ú
7
As soon as the contents of the inserted disc have  
been loaded, the following is shown in the display of  
the DVD player:  
the angled corner of the memory card points to the left.  
Ú
10.2.2. CompactFlash Memory Cards (CF I/CF II)  
CompactFlash memory cards of types 1 and 2 must be  
inserted into the top memory card slot. Insert CF memo-  
ry cards with the contacts first and slide them straight  
into the memory card slot. The side of the memory card  
labelled with the manufacturer logo must face downward.  
Fig. 16 Information in the display for DVD/S-VCD  
qFor DVDs: DVD  
10.2.3. MultiMediaCard/SecureDigital  
Memory Cards (MMC/SD)  
For VCDs/S-VCDs: VCD or S-VCD  
wThe current audio playback setting, in this example:  
MultiMediaCard/SecureDigital memory cards must be inserted  
into the bottom memory card slot. Insert MMC/SD memory  
cards with the contacts first and slide them straight into the  
bottom memory card slot. It is essential that …  
the Dolby Digital symbol (depending on the insert-  
ed DVD).  
eThe elapsed play time of the DVD/VCD/S-VCD current-  
ly being played in hours, minutes and seconds.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
As soon as the contents of the inserted CD-R/CD-  
RW/memory card with MP3/WMA/JPEG files have been  
loaded, the CD-R menu is displayed on the screen.  
rThe number of the current chapter or track.  
and  
for the playback mode.  
tThe symbols  
00:00  
001/005  
00:00  
Playback of the inserted disc begins automatically. It is pos-  
sible that the contents will not be played immediately but a  
selection menu displayed on the television screen instead.  
In this case: Use the control buttons of the remote control  
to select the desired menu item.Then press the OK button.  
q
PHOTO 1  
PHOTO 2  
PHOTO 3  
e
w
10.4. Pla yin g Au d io CDs  
PHOTO 4  
PHOTO 5  
7
As soon as the contents of the inserted disc have been  
loaded, the following is shown on the television screen:  
The number of the currently played track  
Ú
Ú
Fig. 18 Displaying JPEG Files  
The elapsed playback time of the current track in  
hours, minutes and seconds  
If no folders are present:  
qThe number of the currently selected file/number of  
The follow ing is show n in the display of the  
DVD player:  
files on the disc/memory card  
wList of the files on the disc/memory card  
For JPEG files: A preview of the currently selected  
image  
e
00:00  
00:00  
001/001  
Fig. 17 Information in the display for CDs  
q
\
qCD  
PHOTOS 1  
PHOTOS 2  
w
wThe symbols  
and  
for the playback mode  
PHOTOS 3  
PHOTOS 4  
PHOTOS 5  
eThe number of the currently played track  
PHOTOS 6  
rThe elapsed playback time of the current track in  
minutes and seconds.  
Playback of the inserted disc begins automatically.  
10.5. Pla yin g DVD-R/DVD+R/DVD-RW/  
DVD+RW/CD-Rs/CD-RWs/Me m o ry  
ca rd s w it h MP3/WMA/JPEG File s  
Fig. 19 Display of the folders  
Please continue reading at step 9.  
If folders are present:  
Ô
ôNote:  
qThe number of the currently selected folder/num-  
In contrast to audio CDs, files can be saved in folders on a  
DVD/CD-R/CD-RW/memory card. Depending on this possibili-  
ty, the following steps – if required – are described for DVD/CD-  
Rs/CD-RWs/memory cards with and without folder structures.  
Due to the bandwidth limit, could not playback JPEG-file,WMA  
and MP3 at the same time in the memory card.  
ber of folders on the disc/memory card  
List of the folders on the disc/memory card  
w
8
First select a folder from the folder list by pressing  
the control buttons up/down. The currently selected  
folder is highlighted in yellow in the folder list.  
Then press the OK button. The CD-R menu now  
displays a list of the files in the selected folder in  
place of the folder list.  
The playing of DVD/CD-Rs/CD-RWs/memory  
cards with MP3/WMA/JPEG files is controlled via  
a separate menu. This CD-R menu is displayed on  
the screen once a DVD/CD-R/CD-RW/memory  
card with MP3/WMA/JPEG files is inserted.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11.1.1. Stopping Playback  
00:00  
00:00  
001/020 q  
To stop playback, press the Stop button once.  
11.1.1.2. ... with Resume Function  
\
w
. .  
PHOTO 1  
If you have stopped playback by pressing the Stop button  
once:The DVD player automatically saves the point at which  
you stopped the playback.This function is called the "resume  
function". "Press: <Play> to continue" is displayed on the tele-  
vision screen.As soon as you press the Play button again, the  
playback is continued from the saved point.  
PHOTO 2  
PHOTO 3  
PHOTO 4  
PHOTO 5  
Fig. 20 Display of the subfolders  
11.1.2.2. ... without Resume Function  
If you have stopped playback by pressing the Stop but-  
ton once: If you press the Stop button a second time,  
the saved point at which you stopped playback is clear-  
ed. As soon as you press the Play button again, play-  
back starts again from the beginning.  
qThe number of the currently selected file/number of  
files in the selected folder  
wList of the files in the current folder  
To return to the folder list: Use the up/down control but-  
tons to select the folder with the name "..". Then press the  
OK button. The folder list is now displayed again.  
11.2. Skip  
ôNote:  
9
Select the file you would like to play first using the  
control buttons up/down. The current file is high-  
lighted in yellow in the file list.  
This function may not be available for all DVDs/VCDs/  
S-VCDs/memory cards! If you attempt to execute a func-  
tion that is not available, the symbol  
the television screen.  
is displayed on  
10 Press the OK button. The selected file is now  
played/displayed.  
By pressing the Skip Forward button during plaback of  
a ...  
For information on the functions available  
during playback: please read Section 11. "Gen-  
Ô
eral Functions During Playback“.  
DVD/VCD/S-VCD: you can skip forward to the  
Ú
start of the next chapter. The selected chapter is  
played immediately; it is not necessary to press the  
Play button.  
11. Ge n e ra l Fu n ct io n s Du rin g  
Pla yb a ck  
Audio CD/CD-R or CD-RW/memory card with  
Ú
While a disc/memory card is being played, you can  
make use of the following functions of the DVD player:  
MP3/WMA files: you can skip forward to the start of the  
next title.The selected title is played immediately; it is  
not necessary to press the Play button.  
11.1. Pa u sin g Pla yb a ck  
CD-R or CD-RW/memory card with JPEG files: you  
can skip forward to the next image in the image list.  
Ú
To pause the playback:  
1
Press the Pause/Step button once during playback.  
is displayed on the television screen  
By pressing the Skip Backward button during playback  
of ...  
For DVDs only: On the screen, you will see a pau-  
sed image of the currently displayed scene.  
DVD/VCD/S-VCD: you can skip backward to the  
Ú
start of the previous chapter. The selected chapter is  
played immediately; it is not necessary to press the  
Play button.  
2
To continue playback, press the Play button once.  
After a few seconds, playback will be continued.  
What are chapters? On this topic, please refer to  
Section 19. "Glossary / KeyWord Index".  
Ô
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Audio CD/CD-R or CD-RW/memory card with  
MP3/WMA files: you can skip backward to the start  
of the currently played title. The selected title is  
played immediately; it is not necessary to press the  
Play button.  
Ú
Ú
ôNote:  
For audio CDs, the sound is played back at higher speed  
during fast forward/rewind.  
For DVDs/VCDs/S-VCDs, no sound is played during  
fast forward/rewind.  
CD-R or CD-RW/memory card with JPEG files:  
you can skip backward to the previous image in the  
image list.  
3
To continue playback of the disc at normal speed  
from the selected point, press the Play button once  
while fast forwarding/rewinding.  
11.3. Fast Forw ard/Rew ind  
11.4. Act iva t in g Va rio u s Pla yb a ck  
Mo d e s  
ôNote:  
The fast forward/rewind function is not available for the  
playback of CD-Rs/CD-RWs/memory cards with JPEG  
files.  
ôNote:  
These functions may not be available for all discs/  
memory cards! If you attempt to execute a function that  
is not available, the symbol [X] is displayed on the tele-  
vision screen.  
To locate specific points during playback using the fast  
forward/rewind function:  
1
For fast forward, press the F.Fwd button …  
During playback of a disc, you can activate the follow-  
ing playback modes:  
once for two times fast forward speed;  
displayed on the screen.  
2x is  
4x is  
Ú
11.4.1. Repeat Playback  
twice for four times fast forward speed;  
displayed on the screen.  
Ú
Ú
Ú
Ú
With the repeat playback function, you can …  
three times for eight times fast forward speed;  
8x is displayed on the screen.  
For audio CDs/VCDs/S-VCDs: repeat playback of  
individual tracks or the entire audio CD.  
four times for sixteen times fast forward speed;  
is displayed on the screen.  
16x  
For DVDs: repeat playback of either the title, chap-  
ter or the entire DVD.  
five times for thirty-two times fast forward speed;  
32x is displayed on the screen.  
For CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files: switch between the play-  
back modes, single, repeat one, repeat folder and  
folder.  
2
For fast rewind, press the F.Rwd button …  
once for two times fast rewind speed;  
displayed on the screen.  
2x is  
4x is  
1
Press the Repeat button once during playback.  
Ú
For audio CDs/VCDs/S-VCDs:  
Track is  
twice for four times fast rewind speed;  
displayed on the screen.  
displayed on the screen. The current track is played  
now repeated.  
Ú
Ú
Ú
Ú
three times for eight times fast rewind speed;  
is displayed on the screen.  
8x  
For DVDs:  
Chapter is displayed on the screen.  
The current chapter is played repeatedly.  
four times for sixteen times fast rewind speed;  
displayed on the screen.  
16x is  
For CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files: „Single“ is displayed briefly  
in the CD-R menu. The currently selected file is  
played only once.  
five times for thirty-two times fast rewind speed;  
32x is displayed on the screen.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Press the Repeat button a second time.  
For DVDs/VCDs/S-VCDs: With this function, you can  
repeat playback of a specific sequence within the  
For audio CDs/VCDs/S-VCDs: "All" is displayed on current chapter.  
the screen. The entire audio CD is now repeated.  
To do this:  
For DVDs:  
Title is displayed on the screen. The  
current track is played now repeated.  
1
During playback, press the A–B button on the  
remote control as soon as the start of the desired  
For CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files: "repeat one" is displayed  
briefly in the CD-R menu. The currently selected  
file is played reapeted.  
sequence is reached.  
screen.  
A is displayed on the  
2
Press the A–B button again as soon as the end of  
the desired sequence is reached.  
3
Press the Repeat button a third time.  
The repeating of the selected sequence starts immediately; it is  
not necessary to press the Play button.The sequence is re-  
For audio CDs/VCDs/S-VCDs:  
All is no longer  
displayed on the screen. The function repeat play-  
back is now deactivated.  
peated until you press the A–B button again.  
longer displayed on the screen.  
AB is no  
For DVDs:  
entire DVD is now repeated.  
All is displayed on the screen. The  
11.4.3. Random Playback  
If you select random playback for …  
For CD-Rs/CD-RWs/memory cards with MP3/  
WMA/JPEG files: "Repeat folder" is briefly  
displayed in the OSD menu. The entire folder is  
repeated.  
CDs/VCDs/S-VCDs: the tracks of the inserted  
CDs/VCDs/S-VCDs are played in random order.  
DVDs/CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files: the files of the inserted  
DVD/VCD/S-VCD are played in random order.  
4
Press the Repeat button a fourth time.  
For DVDs: The function repeat playback is now  
deactivated.  
screen.  
All is no longer displayed on the  
To activate SHUFFLE playback:  
1
2
Press the SHUFFLE button once during playback.  
"SHUFFLE" is displayed on the screen.  
For CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files: "Folder" is displayed brie-  
fly in the CD-R menu. The entire folder is played  
once.  
To deactivate the random playback: Press the  
SHUFFLE button again. "SHUFFLE" is no longer  
displayed on the screen.  
11.4.2. Repeating Sequences (A–B)  
For CD-Rs/CD-RWs/memory cards with  
MP3/WMA/JPEG files, FOLDER is displayed on the  
screen.  
ôNote:  
The repeating of sequences is not available for the play-  
back of CD-Rs/CD-RWs with JPEG files.  
11.4.4. Using the Bookmark Function  
For audio CDs and CD-Rs/CD-RWs/memory cards  
with MP3/WMA files: With this function, you can repe-  
ôNote:  
at playback of a specific sequence within the current tit- The bookmark function is not available for the playback of  
le/file.  
CD-Rs/CD-RWs/memory cards with JPEG files. CD-  
Rs/CD-RWs/memory cards with MP3/WMA files, the Mark  
button has a different function, see Section 11.4.5. "Using the  
Program Function".  
During playback, you can set "bookmarks" in order to  
listen to or view selected passages again at a later time.  
You can set up to twelve bookmarks. To do this:  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Press the Mark button once during playback. The  
bookmark menu is displayed on the screen  
With the program function, you can combine …  
Audio CDs/VCDs/S-VCDs tracks  
Ú
BOOKMARK  
DVDs chapters  
Ú
into an individual title/chapter/file sequence.You can speci-  
fy the order in which the titles/chapters/files should be play-  
ed.You can combine a maximum of twenty  
titles/chapters/files for programmed playback.  
Fig. 21 Display of the bookmark function  
What are titles and chapters? On this topic,  
please refer to Section19. "Glossary / Key Word  
Index".  
Ô
2
As soon as the playback has reached the point at  
which you would like to set the bookmark: Press  
the Play button once. The following is displayed:  
To combine titles/chapters/files for programmed play-  
back:  
For Audio CDs/VCDs/S-VCDs:  
The number of the track that contains the selected  
passage.  
Ú
Ú
1
For audio CDs/VCDs/S-VCDs: During playback or  
while playback has been stopped, press the Pro-  
gram button once. The program menu is displayed  
on the screen:  
The time position of the bookmark in minutes and  
seconds.  
For DVDs:  
The number of the title that contains the selected  
passage.  
Ú
Ú
Ú
3
The number of the chapter that contains the se-  
lected passage.  
The time position of the bookmark in hours, min-  
utes and seconds.  
Fig. 22 Display of the program menu for audio CDs  
If you would like to set additional bookmarks: Use the  
up/down/left/right control buttons to select additional  
memory positions for bookmarks. Press the Play but-  
ton again when you would like to set the bookmark.  
Each of the numbered fields stands for one of the  
available program memory positions for titles. You  
must enter the desired title numbers after these  
numbers.  
4
Repeat steps 2 and 3 until you have set all the de-  
sired bookmarks. To delete bookmarks: Select the  
number of the bookmark with the  
1
For DVDs: During playback or while playback has  
been stopped, press the Program button once. The  
program menu is displayed on the screen:  
up/down/left/right control buttons. Then press the  
CLR button. The bookmark is now deleted.  
Once you have set all the desired bookmarks, press  
the "Mark" button once to hide the bookmark  
menu on the screen.  
5
6
If you would like to skip to the passages at which  
you have set bookmarks at a later time: Press the  
Mark button again. The bookmark menu is display-  
ed on the screen.  
Fig. 23 Display of the program menu for DVDs  
Select the desired bookmark with the control  
buttons. Then press the Play button. Playback starts  
immediately at the location at which you set the  
selected bookmark.  
11.4.5. Using the Program Function  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Each of the numbered fields stands for one of the  
available program memory positions for chapters.  
After these numbers, you must now enter ...  
5
To clear the program, press the Program button  
again during playback. In the program menu, first  
select the Stop option and press the OK button.  
Then select the EXIT option and press the OK but-  
ton again. "Program" is no longer displayed on the  
screen. The program function is now deactivated.  
in the input field labelled TT: The title number under  
which the desired chapter is stored on the DVDs.  
Ú
Ú
in the input field labelled CH: The number under  
which the desired chapter is stored on the DVDs.  
11.5. Tit le /Ch a p t e r Se le ct io n w it h t h e  
Nu m b e r Bu t t o n s  
ôNote:  
Instead of using the Skip function, you can also select ti-  
tles/chapters of a disc using the number buttons on the  
remote control. To do this:  
If you are not certain which number a desired title or  
chapter has: Select the desired chapter during playback  
with the Skip Forward/Skip Backward buttons. Then press  
the Display button to display information about the  
DVD/VCD/S-VCD on the screen. Here you will find the  
current title and chapter numbers, among other informa-  
tion.  
1
During playback or during paused playback, press  
the number buttons on the remote control that cor-  
respond to the desired title/chapter number. Press  
one of the buttons 1 to 9 to enter single-digit  
title/chapter numbers. To enter title/chapter num-  
bers from 11 to 19: Press the 10+ button followed  
by one of the buttons 1 to 9.  
2
Enter the title and chapter numbers in the input  
fields with the number buttons 1 to 9. Example: To  
enter the title or chapter number 01, press the num-  
ber button 1. To enter the title or chapter number 15,  
press the 10+ number button followed by the 5  
number button. To enter the title or chapter number  
25, press the 10+ number button twice followed by  
the 5 number button.  
Example: To select title/chapter 15, press the 10+ button  
followed by the 5 button.To select title/chapter numbers  
20 or higher: Press the 10+ button until the first digit the  
desired title/chapter number is displayed on the screen.  
Then press the number button that corresponds to the  
second digit of the desired title/chapter number. Exam-  
ple:To select title/chapter 35, first press the 10+ button  
three times.Then press the 5 button.  
If you would like to delete an entry in one of the  
input fields: Select the corresponding input field with  
the control buttons and press the CLR button. The  
entered numbers are deleted.  
2
Playback of the title/chapter with the entered num-  
ber now starts automatically.  
If you would like to delete the entries in all input  
fields: Use the control buttons to select the EXIT  
option beneath the input fields. Then press the OK  
button. The program menu is hidden, all entries are  
deleted.  
12. Sp e cia l Fu n ct io n s fo r  
DVD/VCD/S-VCD Pla yb a ck  
ôNote:  
Once you have entered the title/chapter number, the  
green selection indicator automatically moves to the  
next program memory position.  
The following functions may not be available for all  
DVDs! If you attempt to execute a function that is not  
available, the symbol  
is displayed on the television  
On this topic, also refer to Section 13.1. "Display- screen.  
ing Disc Information".  
Ô
3
4
12.1. Ca llin g Up t h e DVD Me n u  
Repeat step 2 until you have programmed all desired  
titles/chapters.  
Many films on DVD have a root menu on the disc that  
offers the option to play the main film as well as other  
options, such as …  
Now use the control buttons to select the Start  
option beneath the input fields. Then press the OK  
button. Playback of the programmed title/chapter  
sequence starts immediately. "Program" is displayed  
on the screen.  
selecting the language for subtitles and audio  
Ú
selecting chapters directly  
Ú
playing bonus material on the film (background  
information, "Making of", etc.).  
Ú
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If such a menu is present on the inserted disc: You can  
call up the menu during playback by pressing the Menu  
button.  
twice for one fourth playback speed forward.  
displayed on the screen.  
1/4 is  
Ú
Ú
Ú
Ú
Ú
Ú
Ú
three times for one eighth playback speed forward.  
1/8 is displayed on the screen.  
The individual menu items can be selected by pressing  
the control buttons. To confirm the selected menu item,  
press the Play button or the OK button.  
four times for one sixteenth playback speed for-  
ward.  
1/16 is displayed on the screen.  
12.2. Se le ct in g Ch a p t e rs w it h t h e  
Se a rch Fu n ct io n fo r DVD  
five times for half playback speed backward.  
displayed on the screen.  
1/2 is  
12.2.1. Selecting Chapters by Time Position  
six times for one fourth playback speed backward.  
1/4 is displayed on the screen.  
To select a chapter by entering its time position:  
1
2
3
Press the Search button once during playback. A  
menu is displayed on the bottom half of the screen.  
seven times for one eighth playback speed bak-  
kward.  
1/8 is displayed on the screen.  
Press the down control button until the submenu  
item CH Time is highlighted in yellow. Then press  
the OK button.  
The "Time" input field containing "–:––:––" is now  
selected. Use the number buttons 0 to 9 to enter the  
time position of the desired chapter with five digits  
for hours, minutes and seconds.  
eight times for one sixteenth playback speed  
backward. 1/16 is displayed on the screen.  
ôNote:  
No sound is played during slow playback.  
2
To continue playback at normal speed, press the  
Play button once.  
Playback starts immediately at the selected point.  
12.2.2 Selecting Chapters by Chapter Number  
12.4. St e p Fu n ct io n  
To select a chapter by entering the title and chapter  
number:  
To play the contents of an inserted DVD/VCD/S-VCD  
forward as individual frames:  
1
2
Press the Search button once during playback. A  
menu is displayed on the bottom half of the screen.  
1
Press the Pause/Step button once during playback  
to pause the playback. On the screen, you will see a  
paused image of the currently displayed scene.  
Press the down control button until the submenu  
item Chapter is highlighted in yellow. Then press  
the OK button.  
2
3
With each additional press of the "Pause/Step" but-  
ton, the paused image is advanced by one frame.  
3
To enter the chapter number in the highlighted input  
field: Press the number buttons that correspond to  
the chapter number. Example:To start playback of  
chapter 8, press the number button 0/10 followed  
by 8.  
To continue playback, press the Play button once.  
12.5. Zo o m In / Ou t  
During playback of a DVD/VCD/S-VCD, you can zoom  
the image on the screen in or out at multiple levels. To  
do this, press the Zoom button on the remote control …  
Playback starts immediately at the selected point.  
12.3. Slo w Pla yb a ck Fo rw a rd /Ba ckw a rd  
once for the first zoom in level.  
displayed on the screen.  
2x is briefly  
Ú
Ú
Ú
Ú
To view the contents of a DVD/VCD/S-VCD at slower  
speed:  
twice for the second zoom in level.  
displayed on the screen.  
3x is briefly  
1
For slow playback, press the Slow button …  
three times for the third zoom in level.  
briefly displayed on the screen.  
4x is  
once for half playback speed forward (in comparison  
Ú
with the normal playback speed).  
on the screen.  
1/2 is displayed  
four times for the first zoom out level.  
briefly displayed on the screen.  
1/2 is  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
five times for the second zoom out level.  
brielfy displayed on the screen.  
1/3 is  
12.9. Disp la yin g Disc In fo rm a t io n  
Ú
Ú
To display all available information about a DVD on  
the screen:  
six times for the third zoom out level.  
briefly displayed on the screen.  
1/4 is  
1
Press the Display button once during playback. The  
following is displayed on the screen:  
To return to the normal screen size, press the Zoom  
button one more time.  
Left: The number of the current title / the total  
number of titles on the DVD.  
Ú
Ú
Ú
2
12.6. Ch a n g in g Ca m e ra An g le s  
Many DVDs/VCDs/S-VCDs contain scenes that were  
recorded simultaneously from different camera angles.  
With such DVDs/VCDs/S-VCDs, you can view the  
same scene from various perspectives.  
In the middle: The number of the current chapter /  
the total number of chapters on the DVD.  
Right: The elapsed time of the current title in hours,  
seconds and minutes.  
To do this, press the Angle button during playback of  
the corresponding scene. Each press of the Angle but-  
ton switches to one of the available camera angles.  
If you press the Display button a second time: The  
time until the end of the current title is displayed  
on the right.  
12.7. Sh o w in g /Hid in g Su b t it le s  
3
4
5
If you press the Display button a third time: The  
elapsed time of the current chapter is displayed on  
the right.  
If the DVD/VCD/S-VCD has subtitles, these can be  
displayed during playback by pressing the Subtitle but-  
ton.  
If you press the Display button a fourth time: The  
time until the end of the current chapter is display-  
ed on the right.  
Pressing the Subtitle button the first time displays the  
subtitles in the first available language. Each additional  
press of this button displays the subtitles in another  
available language.  
To hide the disc information: Press the Display but-  
ton one more time. "Display Off" is briefly display-  
ed on the screen.  
The currently selected subtitle language and its number  
are displayed on the screen (e.g. 01/03 German for the  
first of three available subtitle languages).  
13. Sp e cia l Fu n ct io n s fo r  
Au d io CD Pla yb a ck  
To deactivate the subtitle function: If the last of the  
available subtitle languages is displayed (e.g. 03/03  
English for the third of three available subtitle langua-  
ges), press the Subtitle button again. "Subtitle Off" is  
briefly displayed on the screen.  
13.1. Disp la yin g Au d io CD In fo rm a t io n  
In addition to the information displayed on the screen  
12.8. Ch a n g in g t h e Pla yb a ck La n g u a g e  
With many DVDs/VCDs/S-VCDs, you can select a dif-  
ferent playback language during playback. To do this,  
press the Audio button.  
number of the currently playing track  
Ú
elapsed time of the currently playing track  
Ú
The first press of the Audio button switches to the first  
available playback language. Each additional press of  
the Audio button switches to the next available play-  
back language. The currently selected playback langua-  
ge and its number are briefly displayed on the screen.  
Pressing the Display button during playback will  
display additional information. If you press the Display  
button ...  
one time, the time until the end of the current title  
Ú
is displayed.  
two times, the elapsed time of the entire CD is  
displayed.  
Ú
three times, the time until the end of the last track  
on the audio CD is displayed.  
Ú
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
four times, "Display OFF" appears briefly on the  
screen. All information displays are now hidden. To  
once again display the CD information, press the  
Display button again.  
2
To deactivate the scan function, press the Digest  
button again. "Scan" is no longer displayed on the  
screen.  
Ú
13.2. Se le ct in g Tra ck b y Tim e Po sit io n  
14. Ge n e ra l Au d io Fu n ct io n s  
o f t h e DVD Pla ye r  
To select a track by entering its time position on the  
audio CD …  
14.1. Ad ju st in g t h e Pla yb a ck Vo lu m e  
1
2
Press the Search button on the remote control twice  
during playback or while playback is paused.The fol-  
lowing is displayed on the screen:  
Press the Vol + button to increase the playback volume.  
Press the Vol – button to decrease the playback volume.  
Disc Go To: -- : --  
The change in the volume is displayed on the screen  
between the values 0 (sound off) and 20 (maximum  
volume).  
In the input field containing "––:––", enter the time  
position of the desired title on the audio CD. Enter  
the time position with four digits for minutes and  
seconds. To do this, use the number buttons 0/10 to  
9. Playback is started immediately at the selected  
time position.  
14.2. Mu t in g t h e So u n d  
To mute the sound, press the Mute button during  
playback. "Mute" is displayed on the screen. If you  
would like to restore the sound, press the Mute button  
once again. "Mute Off" is briefly displayed on the  
screen.  
13.3. Se le ct in g Pa ssa g e s o f a Tra ck b y  
Tim e Po sit io n  
To select a specific passage of a title by entering its time  
position within the track:  
14.3. Ad ju st in g t h e Dia lo g Vo lu m e  
To separately raise/lower the volume of dialog when play-  
1
2
Press the Search button twice during playback of the ing DVDs/VCDs/S-VCDs:  
track or while playback is paused. The following is  
displayed on the screen:  
1
2
Press the Setup button to display the OSD menu.  
Track Go To: -- : --  
Select the main menu item Audio Setup Page, then the  
submenu item SPEAKER Setup.  
Enter the time position with four digits for minutes  
and seconds. To do this, use the number buttons  
0/10 to 9. Playback is started immediately at the  
selected time position.  
3
4
In the Analog Output Setup Page, select the sub-  
menu item Dialog.  
Use the up/down control buttons to set the dialog  
volume between the values 0 and 20. Then press the  
OK button.  
Example: You would like to select a passage that  
begins one minute after the start of the track. Press  
the following buttons  
0 and 1 for 1 minute;  
0 and 0 for 0 seconds  
Ú
Ú
13.4. Sca n Fu n ct io n  
If you activate the scan function, the titles on the insert-  
ed audio CD will be played for a few seconds each in  
the order in which they are found on the disc. The play-  
back ends with the last track on the audio CD.  
To activate the scan function  
1
Press the Digest button during playback of an  
audio CD. "Scan" is displayed on the screen.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14.4. Activating the Equalizer Function  
14.6. Act iva t in g t h e Ba ss Bo o st  
The sound playback can be modified by various equalizer  
settings. Each equalizer setting has its own characteristic  
The DVD player has a double bass boost function.  
When the bass boost function is activated, the bass  
emphasis in the treble, middle and bass ranges. This allows tones sound "fuller" and richer.  
you to adjust the sound playback to your personal liste-  
ning preferences. To activate the various equalizer settings: To activate the bass boost function:  
1
2
Press the Setup button to display the OSD menu.  
1
2
Press the Setup button to display the OSD menu.  
Select the main menu item Audio Setup Page, then the  
submenu item Equalizer.  
Select the main menu item Audio Setup Page, then the  
submenu item Equalizer.  
3
Select the submenu item Effects. Select one of the  
3
4
Select the submenu item Bass Boost. Choose between  
the options On and Off.  
options:  
Rock  
Pop  
Ú
Ú
Ú
Ú
Ú
Ú
Ú
Ú
If you would like to also activate the second bass  
boost level: Return to the submenu item Equalizer  
and select the submenu item Super Bass. Choose  
between the options On and Off.  
Live  
Dance  
Techno  
Classic  
Soft  
14.6. Activating the Treble Boost  
Off  
In addition to the bass boost, the DVD player also has  
a boost function for treble tones. To activate this:  
4
To deactivate the equalizer function: In the submenu  
item Sound Mode, select the option Off.  
1
2
Press the Setup button to display the OSD menu.  
14.5. Activating the Spatializer Function  
Select the main menu item Audio Setup Page, then the  
submenu item Equalizer.  
The DVD player can simulate the sounds of various rooms.  
In addition to the equalizer function, this is the second  
option for adjusting the sound to your personal listening  
preferences.The following spatializer options are available:  
3
In the Equalizer menu, select the submenu item Tre-  
ble Boost. Choose between the options On and Off.  
Concert  
Living room  
Hall  
Bathroom  
Cave  
Arena  
Ú
15. Ge n e ra l Vid e o Fu n ct io n s  
o f t h e DVD Pla ye r  
Ú
Ú
Ú
Ú
Ú
Ú
Ú
15.1. Ad ju st in g t h e Im a g e Qu a lit y  
To configure/adjust the image quality:  
Church  
Off  
1
2
Press the Setup button to display the OSD menu.  
To activate the spatializer function:  
Select the main menu item Video Setup Page, then  
the submenu item Quality. Select each of the follo-  
wing options in turn …  
1
2
Press the 3D button during playback.The first spatializer func-  
tion is now activated.Its name is briefly displayed on the screen.  
Each additional press of the 3D button switches to  
another spatializer option. Their names are briefly  
displayed on the screen as they are selected.  
Brightness: Here you can set the brightness of the  
image between the values of -20 and + 20.  
Ú
Ú
Ú
Ú
Contrast: Here you can set the image contrast  
between the values of – 16 and + 16.  
3
To deactivate the spatializer function: Press the 3D but-  
ton until "Reverb: Off" is briefly displayed on the screen.  
Gamma: Here you can set the overall brightness  
(correction of the total brightness) of the image.  
ôNote:  
This function is available for Audio CDs/VCDs/S-  
VCDs/WMA/MP3.  
Saturation: Here you can set the Saturation of the  
image between the values of –9 and +9.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hue: Here you can set the hue of the image between  
the values of –9 and +9.  
To configure your preferred settings:  
Ú
Ú
1
2
Press the Setup button to display the OSD menu.  
Select the main menu item Preferences Page.  
Note:  
Luma Delay: Select here between the options 0 T  
and 1 T. The settings serve to compensate for or  
synchronize any delays between the brightness  
(luminance) and color (chrominance) of the video  
signal.  
ô
The main menu item Preference Page cannot be selected  
while a disc/memory card is being played. For this rea-  
son, first stop the playback by pressing the Stop button  
twice.  
16. Ot h e r Fu n ct io n s o f t h e  
DVD Pla ye r  
3
4
5
In the Preference Page, select the submenu item  
Audio. Select your preferred playback language  
here.  
16.1. Pre fe re n ce s  
With these settings, you can configure how DVDs are  
played:  
Then select the submenu item Subtitles in the Pre-  
ference Page. Select your preferred language for  
subtitles here.  
What language should be played during DVD play-  
back.  
Ú
Lastly, select the submenu Disc Menu in the Prefe-  
rence Page. Select the language that you prefer for  
the display of the DVD menu.  
ôNote:  
DVDs can only be played in the selected language if this 16.2. Using the Sleep Tim er Function  
language is available on the DVD.  
The DVD player has a sleep timer function. If this is  
If this is not the case, the DVD is played in one of the activated, the DVD player will automatically switch  
available languages. For most DVDs, information  
about the available audio languages can be found on  
the DVD case.  
itself off after a preprogrammed period of time. For  
example, this is useful if you would like to watch a  
DVD or listen to music while falling asleep. Activating  
the sleep timer function makes certain that the DVD  
player will not keep running all night long.  
The language in which the subtitles should be  
displayed during DVD playback.  
Ú
You can program in time ranges between 15 and 180  
minutes before shutdown of the DVD player. To acti-  
vate the sleep timer function:  
ôNote:  
Subtitles can only be displayed in the selected language if  
this language is available on the DVD. If this is not the  
case, no subtitles or subtitles in a different language are  
displayed. For most DVDs, information about the avail-  
able subtitle languages can be found on the DVD case.  
1
2
3
Press the Sleep button during playback. "Sleep 15  
min" is briefly displayed on the screen.  
Each additional press of the Sleep button switches  
to a different length of time.  
The language in which the DVD menu should be display-  
ed.  
Ú
Once the desired length of time is displayed on the  
screen: Wait until the display of "Sleep" disappears  
from the screen. The DVD player will now  
automatically switch itself off after elapsing of the  
last displayed time.  
ôNote:  
Not all DVDs have a menu. If a menu is available: The  
menu can only be displayed in the selected language if  
this language is available on the DVD. If this is not the  
case, the menu is displayed in one of the available lang-  
uages. With most DVDs, you can select the language in  
which the menu should be displayed within the DVD  
menu itself.  
To deactivate the sleep timer function: Press the  
Sleep button until "Sleep Off" is briefly displayed  
on the screen. Once this display has disappeared, the  
sleep timer function is deactivated.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16.3. Ad ju st in g t h e Disp la y Brig h t n e ss  
3
Select the option Change. A window with three  
input fields is displayed:  
The brightness of the display can be adjusted in three  
levels. To do this:  
1
2
3
Press the Dimmer button once. "Hi" appears in the  
display. The display is now set to the highest of the  
three brightness levels.  
Press the Dimmer button a second time. "Lo" ap-  
pears in the display. The display is now set to the  
lowest of the three brightness levels.  
Press the Dimmer button a third time."Nor" ap-  
pears in the display.The display is now set to the  
middle of the three brightness levels.  
Fig. 24 Setting the passw ord  
16.4. Activating/Deactivating the Pass-  
w ord Check  
The input field Old Password is automatically  
selected first. Enter the factory-set password 136900  
with the number buttons. Then the second input  
field New Password is automatically selected.  
The DVD player has a password system. If this is acti-  
vated, a number combination must be entered to  
change the settings to prevent access by children.  
4
Enter the desired new password in the input field  
New Password. Please note that the new password  
must also consist of a six-digit number combination.  
Use the number buttons again to enter the new  
password. Then the third input field Confirm PWD is  
automatically selected.  
To activate or deactivate the password check:  
1
2
Press the Setup button to display the OSD menu.  
Select the main menu item Password Setup Page  
and then the submenu item Password Mode.  
5
6
Enter the desired new password again in the input  
field Confirm PWD.  
3
Select the option …  
Press the OK button. Your new password is now  
saved.  
On to activate the password check. The password  
check is activated in the default factory settings.  
Ú
ôNote:  
Off to deactivate the password check. Because the  
Ú
password check is activated in the factory settings, a If you forget your password: The old, factory-set pass-  
window now appears. Enter the factory-set pass-  
word 136900 into the input field Password in this  
window. Use the number buttons for this. Then  
press the OK button.  
word 136900 can still be used.  
16.6. Usin g t h e Kid Sa fe Fu n ct io n  
Many DVDs and VCDs/S-VCDs have an age rating. The  
age rating indicates the age groups for which the contents  
of the DVD/VCD/S-VCD are intended. The age rating is  
16.5. Se le ct in g Yo u r Ow n Pa ssw o rd  
You can replace the factory-set password 136900 with a usually printed on the disc case and/or on the  
password of your own choosing. This must consist of six DVD/VCD/S-VCD itself.  
digits. You can use the numbers 0 to 9. To change the  
factory-set password:  
The DVD player has a kid safe function with three possible  
levels.This prevents the playing of DVDs/VCDs/S-VCDs that  
are not rated for the configured age group.To select an age  
rating level:  
1
2
Press the Setup button to display the OSD menu.  
Select the main menu item Password Setup Page  
and then the submenu item Password.  
1
2
Press the Setup button to display the OSD menu.  
Select the main menu item Preference Page and then  
the submenu item Parental.  
3
Select one of the three age rating levels here:  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
G
ôNote:  
Only DVDs with no age limitation or with an age  
rating of G can be played.  
Before resetting to the factory settings, consider the fol-  
lowing: All of your previous settings in the OSD menu  
will be lost after the reset.  
PG 13  
3
Select the option Reset. The DVD player is now  
reset to the factory settings.  
No DVDs with an age rating of PG 13 or higher can  
be played.  
16.8. Sw it ch in g t h e DVD Pla ye r Off  
Adult  
To switch the DVD player off:  
All of DVDs can be played.  
1
If a disc or memory card is being played: First stop  
the playback. To do this, press the Stop button  
twice.  
If you have activated the password check, the pass-  
word check window is displayed. Enter the pass-  
word in the input field, then press the OK button.  
2
Open the disc tray to remove any inserted disc  
from the DVD player. To do this, press the  
Open/Close button. Then close the disc tray by  
pressing the Open/Close button again.  
ôNote:  
The exact functioning of the kid safe function depends on the  
individual DVD/VCD/S-VCD.With many DVDs/VCDs/S-  
VCDs, playback is not possible at all while the kid safe function  
is activated.With others, chapters not suitable for the respective  
age rating level are skipped over or replaced by a different chap-  
ter. Please also note that …  
To remove a memory card from the memory card slot:  
Press the Card button to switch from memory card  
mode to another mode.Then carefully pull the memory  
card straight out of the memory card slot.Then close  
the flap on the memory card slot by pressing it closed.  
DVDs/VCDs/S-VCDs that are not labelled with an  
age rating may still have an age rating.  
Ú
3
Press the Standby button.The DVD player now switch-  
es to the "Standby" mode.To switch the DVD player  
back on, press the Standby button again.To switch the  
DVD player off entirely, press the Power button.  
With many DVDs/VCDs/S-VCDs that are labelled  
with an age rating, the kid safe function with config-  
ured age rating level will not work.  
Ú
16.7. Re se t t in g t h e DVD Pla ye r t o t h e  
Fa ct o ry Se t t in g s  
17. Cle a n in g t h e DVD Pla ye r  
Only clean the housing of the DVD player with a  
If you would like to reset all the settings you have  
slightly damp cloth and a mild cleanser. When cleaning,  
configured in the OSD menu: Reset the DVD player to make certain not to allow any moisture to enter into  
the original factory settings. To do this:  
the DVD player!  
1
2
Press the Setup button to display the OSD menu.  
Clean the inside of the disc tray – if necessary – only  
with a clean, dry brush (e.g. lens cleaning brush, availa-  
Select the main menu item Preference Page and the ble from camera stores). Never use moisture to clean  
submenu item Default.  
the inside of the disc tray!  
Warning!  
|
If moisture enters the DVD player, the risk of an electric  
shock exists! The DVD player may also be irreparably  
damaged!  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No sound  
18. Troubleshooting  
A Check whether the television and/or DVD player  
The display is blank/DVD player does not function,  
even though it w as sw itched on  
have been muted.  
B Check whether all connector cables between the  
DVD player and any audio components connected  
are firmly plugged into the appropriate sockets.  
A Check whether the power cord is properly plugged  
into the socket.  
B Check whether the socket into which you have  
plugged the power cord of the DVD player is sup-  
plying electricity by plugging in another device. If  
necessary, plug the power cable of the DVD player  
into a different power socket.  
C Check whether the settings in the OSD menu  
match the connection option you have used to con-  
nect the audio components to the DVD player.  
Refer here to Section 8. "Connecting Audio Com-  
Ô
ponents to the DVD Player".  
C Switch off the DVD player by pressing the "Power"  
button and wait for ten seconds. Then switch the  
DVD player back on by pressing the "Power" but-  
ton.  
D Consult the operating manual of the television to  
determine whether any settings must be configured  
on the television in order to use the DVD player  
with the television.  
The display indicates "No Disc", even though a disc  
w as inserted  
E
Consult the operating manual of any connected audio  
component to determine whether its settings must be  
configured in order to use it with the DVD player.  
A The disc is dirty, scratched or damaged. Clean the disc or  
insert a different disc.  
F
If you …  
Inserted disc is not played  
have connected the DVD player to a stereo televi-  
sion and have not connected any audio components  
to the DVD player or  
Ú
A film of condensation may have formed on the laser  
sensor lens of the DVD player. In particular, this may  
occur if the DVD player has been subjected to large  
temperature fluctuations.  
have connected a Dolby Prologic-compatible audio  
component via the analog stereo output (with RCA  
cable to the RCA cable sockets "FL" and "FR") of  
the DVD player:  
Ú
In this case, place the DVD player in a dry environment  
at normal room temperature. First remove any inserted  
disc from the disc tray. Then leave the DVD player  
switched off for at least one hour without using it until  
the condensation film has evaporated.  
Check whether the option Stereo has been selected  
in the Analog Output Setup Page under the subme-  
nu item Downmix.  
No image or only black and w hite image  
Also refer to Section 9.6.1. "Configuring the  
Analog Output"  
Ô
A Check whether all connector cables between the  
DVD player and the television (or video projector)  
are firmly plugged into the appropriate sockets  
No 4:3 or 16:9 image  
B Check whether the settings in the OSD menu  
match the connection option you have used to con-  
nect the DVD player to the television (or the video  
projector).  
A Consult the operating manual of the television to deter-  
mine which image format the television supports.  
B Check whether the settings in the OSD menu  
match the available image format of the television.  
Refer here to Section 7. "Connecting the DVD  
Player to a Television".  
Ô
Remote control does not function  
C Consult the operating manual of the television (or  
the video projector) to determine whether any set-  
tings must be configured on the television (or video  
projector) in order to use the DVD player with  
television.  
A Check whether the batteries of the remote control  
are inserted into the battery compartment with the  
correct polarity.  
B Check whether the batteries in the remote control  
are dead and replace both batteries, if necessary.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ôNote:  
C Make certain that there are no obstructions  
between the remote control and the DVD player.  
For damage from ...  
D Remain within five meters of the DVD player when  
opening of the housing of the DVD player and/or  
remote control  
Ú
using the remote control.  
Playback language / subtitle language does not  
match the settings in the OSD menu  
repair attempts by unqualified persons  
Ú
no liability is accepted or warranty offered!  
The playback language / subtitle language configured in  
the OSD menu is not available on the inserted disc.  
19. Glossary / Key Word Index  
What are DVDs, VCDs and S-VCDs?  
DVDs  
One or more functions cannot be activated  
The selected function may not be available for all  
DVDs/VCDs/S-VCDs. If you attempt to execute a  
function that is not available, the symbol [X] is display-  
ed on the television screen.  
DVD is the abbreviation for "Digital Versatile Disc".  
DVDs are used to store audio and video data; they exist in  
None of the buttons on the device or on the remo- the sizes 8 cm and 12 cm (diameter). With a storage capa-  
te control function / other malfunctions  
city many times greater than that of CD-Rs/CD-RWs,  
DVDs offer up to eight hours of playback time for the  
A Switch the DVD player off by pressing the "Power" audio and video data they contain.  
button. Wait ten seconds, then press the "Power"  
button again once to switch the DVD player back  
on.  
VCDs/S-VCDs  
"Video CD" (VCD) and "Super Video CD" (S-VCD)  
refer to two methods for compressed – i.e. space-saving –  
storage of films on CDs. VCDs and S-VCDs exist in the  
sizes 8 cm and 12 cm (diameter). Their storage capacity is  
lower than that of DVDs. As a result, they only offer a  
playback time of 20 minutes (8 cm size) or 74 minutes (12  
cm size) for the audio and video data they contain.  
B If the problem still persists: Reset the DVD player to the  
factory settings.  
Refer here to Section 16.7. "Resetting the DVD  
Ô
Player to the Factory Settings“.  
Contact one of our service partners in your area if …  
VCDs exist in two versions:  
the malfunctions listed cannot be corrected as  
described above or  
Ú
With VCDs/S-VCDs of version 1.1, only audio and  
video data can be played.  
Ú
malfunctions arise other than those listed  
Ú
With VCDs/S-VCDs of version 2.0, PBC (Playback  
Control) functions are available. In addition, paused  
images can be displayed in high resolution.  
Ú
Danger!  
Never attempt to repair a defective power cable yourself!  
The risk of electrical shock exists!  
Playback Control (PBC)  
Warning!  
VCDs/S-VCDs of version 2.0 have Playback Control  
("PBC"). This means that a root menu is available on  
the VCD/S-VCD with which various features of the  
VCD/SVCD can be accessed.  
|
The DVD player and the remote control do not contain  
any parts that can be serviced by the user. If the housing  
of the DVD player and/or remote control are opened,  
the warranty is voided. If repairs are necessary, contact  
one of our service partners in your area. The addresses  
of our service partners can be found in the warranty  
booklet. This is enclosed with the DVD player.  
What are titles and chapters?  
Titles are the largest units of video and audio data on  
DVDs; with many DVDs, the (main) film has the title  
number 01. Additional title numbers may be used for  
bonus material (e.g. film trailer, background informa-  
tion, etc.) that is available on many DVDs.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapters are the next smaller unit of video and audio  
Half images (interlacing) / full images (progressive  
data beneath titles. If the title or titles on a DVD/VCD/ scanning)  
S-VCD are subdivided into chapters, they are assigned  
numbers that can be entered to select the chapters directly. A standard television image consists of 576 visible lines;  
first the odd then the even image lines are displayed in  
Please note that  
alternation. In other words, one half image is shown at  
a time. In this way, only 30 full images (60 half images)  
can be displayed per second. This method is referred to  
as "interlace" format.  
not all DVDs have titles subdivided into (numbered)  
Ú
chapters  
chapters are also referred to as "scenes" (such as in In contrast, the progressive scan format displays all  
Ú
the root menu of DVDs)  
image lines at once, meaning that 60 full images are  
displayed per second. This increases the overall quality  
of the image; for example paused images and text ap-  
pear sharper.  
What are Scart, S-video, composite video, progres-  
sive scan and YUV?  
Scart  
Decoder  
Scart refers to a 21-pin, standardised connector over which The sound on DVDs with home theatre sound is saved  
the RGB signals, video signals and S-video signals as well on the DVD in encrypted (encoded) form. Various  
as numerous control and additional signals are transmitted. encryption formats exist for different purposes, e.g.  
AC-3 for the playback of Dolby Digital surround  
S-video  
sound.  
When the DVD player is connected to a television via  
In order to play back encrypted sound, the playback  
S-video, the brightness and colour signals are separated; devices (e.g. the DVD player) or connected audio com-  
this achieves better image sharpness and less "colour  
noise“. Colour noise refers to the overlaying of the  
colourful, usually highly saturated parts of a video im-  
age with irregular, variable flaw patterns.  
ponents (e.g. surround sound systems) must have a  
decoder that converts the encrypted signals back into  
music or sound.  
The Silvercrest KH 6507 DVD player has an AC-3 deco-  
der for Dolby Digital 5.1 surround sound signals.  
Composite video  
Dolby Surround  
Video signal or FBAS signal; this refers to a video signal  
that contains both colour and brightness information.  
Dolby Surround is an analog audio format with which  
the two channels of a stereo audio signal are used to  
store surround sound information for an additional  
channel. Dolby Surround decoders convert the signals  
back into sound or music and send the audio to two  
Progressive scan  
Normally,TVs and video projectors are supplied with "half  
images" that are displayed as alternating sets of lines (interla- additional speakers that are situated behind the lis-  
cing).This results in clearly visible line structures. In contrast,  
progressive scan refers to the supply of full images (with this  
DVD player at the YPbPr output), progressive scan signals  
can only be processed by playback devices (primarily large  
tener.  
Dolby Prologic  
screen televisions, projectors) that offer this feature.The ima- In comparison with the Dolby Surround audio format,  
ge quality is significantly better than typical video signals.  
Dolby Prologic uses an additional channel in the stereo  
signal; this is the "center" channel. The corresponding  
center speaker is situated directly between the stereo  
speakers. The deepest tones are sent to a low range  
speaker, called a "subwoofer". The subwoofer can be  
placed at any location in the room; the reason for this is  
that the deep tones emitted by the subwoofer cannot be  
precisely localised by the human ear.  
YUV (component video out)  
YUV refers to the component signal, which is available  
with this device at the YPbPR output in the form of  
"half images"; generally, this is the best signal for large  
screen televisions and projectors that cannot process  
progressive scan signals. As with RGB video signals, the  
YUV consists of three separate video signals:  
the brightness signal "Y" and  
Ú
the two colour differential signals "Pb/Cb" and "Pr/Cr"  
Ú
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dolby Digital (5.1)  
WMA  
Dolby Digital, also referred to as AC3, is a digital audio WMA ("Windows® Media Audio“) is a file format for  
format with which up to six separate audio channels  
can be transmitted. On most current DVDs, the audio is  
stored in "Dolby Digital 5.1" format; the "5" in the  
name "5.1" stands for the three front and two rear sur-  
audio files developed by Microsoft®.  
JPEG  
round sound channels, the "1" stands for the subwoofer JPEG ("Joint Photographics Expert Group") refers to  
channel.  
a widely used graphics format developed by the organi-  
sation of the same name, with which colour and gray  
scale image data are compressed.  
DTS  
DTS is the abbreviation for "Digital Theatre System"  
and refers to one of the most common surround sound  
DivX  
formats for DVDs. As with Dolby Digital 5.1, DTS uses DivX® is an encoding format for video and multimedia  
three front and two rear surround sound channels as  
well as a subwoofer channel.  
data developed by the company DivXNetworks®, Inc.  
MPEG  
What are PAL, NTSC and SECAM?  
PAL  
MPEG ("Moving Picture Experts Group") refers to a  
video compression standard.  
PAL is the abbreviation for "Phase Alternation Line".  
PAL is the typical and most common colour television  
standard in Central and Western Europe (exception:  
France, see "SECAM").  
What are folders?  
In contrast to audio CDs, the titles on a CD-R/CD-  
RW with MP3, WMA or  
JPEG files can be stored in folders, for example, to  
organise titles from various genres.  
NTSC  
For instance, the structure of an MP3 CD may appear  
as shown below if the MP3 files were saved in folders.  
NTSC is the abbreviation for "National Television  
System Committee". NTSC is a colour television stan-  
dard that is used primarily in the USA and Japan.  
SECAM  
SECAM is the abbreviation for the French "système en  
couleur avec mémoire". SECAM is currently the typi-  
cal and most common colour television standard in  
France and many Eastern European countries.  
Audio CDs  
Audio CDs contain only audio data; they are also avai-  
lable in the sizes 8 cm and 12 cm (diameter). The  
playback time for the audio data stored on CDs is 20  
minutes (8 cm size) or 74 minutes (12 cm size). Audio  
data is stored on audio CDs in the CDA format.  
Fig. 25 Possible folder structure for an MP3 CD  
MP3  
MP3 refers to a method or format for compression of  
audio files developed by the Fraunhofer Institute.  
Works of music compressed in MP3 format are only a  
fraction of their original size, making it possible to store  
significantly more music on CD-Rs/CD-RWs, for exam-  
ple, than can be stored on typical audio CDs that save  
the audio data in the CDA format.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Infinity Speaker Infinity TOTAL SPEAKER SOLUTIONS User Manual
Ingersoll Rand Heat Pump PD15E FES PXX User Manual
JVC Camera Accessories GZ E10 User Manual
JVC Car Speaker CS VS601 User Manual
Kenwood Speaker System KCA WR10 User Manual
Kettler Elliptical Trainer 07644 000 User Manual
Kicker Stereo Amplifier 50 Si User Manual
KitchenAid Refrigerator Cabinet Depth Side by Side Refrigerator User Manual
KitchenAid Ventilation Hood KWCU320JSS1 User Manual
Korg DVD Recorder MR 1000 User Manual