Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety
Instructions
• READ THESE INSTRUCTIONS - All the safety
and operating instructions should be read before
the product is operated.
• VENTILATION - Do not block any of the
ventilation openings. Install in accordance with the
manufacturer's instructions.
• KEEP THESE INSTRUCTIONS - The safety and
operating instructions should be retained for
future reference.
• GROUNDING OR POLARIZATION - Do not
defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the provided plug
does not fit into your oulet, consult an electrician
for replacement of the obsolete outlet.
• HEED ALL WARNINGS - All warnings on the
product and in the operating instructions should
be adhered to.
• FOLLOW ALL INSTRUCTIONS - All operating
and use instructions should be followed.
• CLEAN ONLY WITH A DAMP CLOTH - Unplug
this product from the wall outlet before cleaning.
The product should be cleaned only with a
• POWER-CORD PROTECTION - Protect the
power cord from being walked on or pinched
particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
polishing cloth or a soft dry cloth. Never clean with
furniture wax, benzene secticides or other volatile
liquids since they may corrode the cabinet.
• LIGHTNING - Unplug this apparatus during
lightning storms or when unused for long periods
of time.
• DO NOT USE THIS APPRATUS NEAR WATER
- Do not use this product near water - for
example, near a bathtub, wash bowl, kitchen sink,
or laundry tub; in a wet basement; or near a
swimming pool; and the like.
• SERVICING - Refer all servicing to qualified
service personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid
has been spilled over, objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
• ACCESSORIES - Only use the
attachments/accessories specified by the
manufacturer.
• CART - Use only with a cart, stand,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
• HEAT - Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus(including amplifiers) that produce heat.
Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
..........................
.........
.................................
Selecting Subtitles (DVD only)
Selecting Audio Languages (DVD only)
Repeating a Title, Chapter
21
21
22
22
23
23
24
24
Before You Start
...................................................
What’s in the box
Putting the batteries in the remote control
Using the remote control
Compatible Discs
5
...................
.....
A-B Repeat (DVD/Audio CD only)
5
.......................
.....................................
ZOOM screen (DVD/HDD only)
.............................
5
..................................................
Switching the Camera Angle
...................................
6
Direct Search (DVD only)
Bookmark
................................................................
Controls & Display
.............................................................
......................................................................
Front Panel
Display
Rear Panel
7
8
9
10
Recording
......................................................
.................
....................................................
..............................................................
........................................
Basic recording
OTR (One touch Timer Recording)
Timer Recording
Timer review - changing and erasing
record settings
25
26
26
Remote Controller Unit
....................................................
Connection
27
Recording from a DV (Digital Video)
.........
.........
................
Connection for Video Output Terminals
Connection for Audio Output Terminals
Connection for A/V Input Terminals
13
14
14
14
............................................................
camcorder
28
29
29
.............................................
.............................
Timeshift Recording
Copying (from HDD to DVD)
...........................................
Connection for DV IN
Editing (DVD+R/DVD+RW/HDD)
Getting started
..............
.........................
...............................
Editing the title of DVD+R/DVD+RW
Editing the chapter of DVD title
Editing the program of HDD
30
31
32
.................................................
Turning on and off
15
15
Selecting the HDD or DVD for playback
......................................................
and recording
Displaying disc information on
......................................................
screen (OSD)
.........................................................
Screen Saver
15
15
Using the Setup Menu
...................................................
Basic Operations
..................................................................
33
33
34
36
37
38
38
SYSTEM
......................................................................
......................................................................
..............................................................
.................................................................
.........................................................................
Basic Playback
VIDEO
AUDIO
SECURITY
RECORD
DISC
...............................................
Playing a DVD disc
Playing a DVD+RW or DVD+R disc
16
16
16
17
17
18
................
............................................
Playing an Audio CD
..............................................
Playing a JPEG CD
.......................................
Playing MPEG-4 Movie
.................................
Playing a program of HDD
Additional Information
.........................................................
Specifications
40
41
Advanced Playback
.....................................................
Troubleshooting
....................................
....................................
Fast Forward / Backward
Skip Forward / Backward
Slow Forward / Backward (DVD only)
Frame by Frame Playback (DVD only)
19
19
19
19
20
............
..........
.................
WARRANTY and SUPPORT
................................................................
Distributor
43
Program Playback (Audio CD only)
Table of Contents
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Insert two AA/R03 batteries into
the battery compartment
following the indications
(+, -) inside the
What's in the box
2
3
Thank you for buying this product. Please confirm
that the following accessories are in the box when
you open it.
compartment.
Accessories
Close the cover.
RF cable
Using the remote control
Audio/Video cable
Keep in mind the following when using the
remote control :
• Make sure that there are no obstacles between
the remote and the remote sensor on the unit.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit's remote sensor.
Remote control
AA dry cell batteries x 2
• Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote.
Operating instruction
Scart cable
(this manual)
NOTE
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
• Don't mix new and old batteries together.
Putting the batteries in the remote
control
• Don't use different kinds of batteries together-although
they may look similar, different batteries may have
different voltages.
• Make sure that the plus and minus ends of each battery
match the indications in the battery compartment.
Open the battery compartment
cover on the back of
the remote control.
1
• Remove batteries from equipment that isn't going to be
used for a month or more.
• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.
Before You Start
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
DVD+R/RW compatibility
Compatible Discs
• This unit can play DVD+R and
DVD+RW discs recorded as
DVD video format.
Any disc that displays one of the following logos
should play in this system. Other formats, including
DVD-RAM, DVD-ROM, DVD-Audio, SACD and
CD-ROM will not play.
• Also this unit can record the
video and audio signal in
DVD+R or DVD+RW disc.
DVD Video compatibility
• Single-sided or double-sided
discs.
• Single layer or dual layer discs.
• Dolby Digital, DTS, MPEG or
Linear PCM digital audio.
MPEG4 CD compatibility
• Also this can play MPEG4
disc.
• MPEG-2 digital video Discs are generally divided
into one or more titles. Titles may be further
subdivided into chapters.
JPEG CD compatibility
• JPEG Photo in Discs.
DVD-R compatibility
CAUTION
• This unit can play DVD-R
discs recorded as DVD video
format.
• DVD-R and CD-R/RW discs recorded using a personal
computer may not play if the disc is damaged or dirty, or
if there is dirt or condensation on the player's lens.
• If you record a disc using a personal computer, even if it
is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
application software used to create the disc.
• Some of MPEG4 movies could not be played depending
on the encoding methods.
Audio CD compatibility
• 12cm or 8cm discs
• Linear PCM digital audio
• CD-Audio, CD-R and CD-RW
formatted CDs are divided into
tracks.(This unit can play CD-R
and CD-RW discs recorded in CD Audio or Video
CD format, or Kodak picture CD files.)
DVD Video regions
All DVD Video discs carry a region mark on the case
somewhere that indicates which region of the world
the disc is compatible with. Your DVD player also has
a region mark, which you can find on the rear panel.
Discs from incompatible regions will not play in this
player. Discs marked ALL will play in any player.
Before You Start
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Front Panel
1
2 3 4 5
6
12 11 10
9
8
7
DISC TRAY
COMPOSITE VIDEO IN
1
2
3
4
5
6
7
Put a disc to be played in here.
8
9
Connect to Composite Video Output of
camcorder.
OPEN/CLOSE
To open or close the disc tray.
DV IN
Digital input jack for use with a digital video
camcorder. This jack is for connection to DV
camcorder only. It is not compatible with
other digital equipments.
PLAY/PAUSE
Press to start or pause a disc playing.
STOP
NEXT (Skip Forward)
To skip to the next chapter or track.
Press to stop a disc playing.
10
11
12
RECORD
Press to start a disc recording.
STANDBY/ON
To switch the unit on or into Standby.
FL DISPLAY
Displays operation status.
PREVIOUS (Skip Backward)
To skip to the previous chapter or track.
AUDIO IN
Connect to Audio Output of camcorder.
Controls & Display
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Display
1 2
3
4
5
6
7
8
9
10 11 12
13
TIMER Recording Indicator
ROTATION
1
2
Lights when timer recording is on.
8
Rotates when the disc is spinning.
HDD Indicator
Indicates the HDD mode.
ANGLE
9
Indicates the current disc being played is
viewed as multi angle.
This function only works for discs having
scenes recorded at different angles.
REPEAT Indicator
10
Illuminates when the current play mode is
under repeat title, chapter, track, A-B
respectively.
DOLBY DIGITAL Indicator
3
4
5
6
Indicates Dolby Digital 5.1CH playback.
DVD Indicator
Indicates the DVD mode.
TITLE Indicator
Title number for DVD playback.
11
12
DTS Indicator
Illuminates when the format of digital audio
output is DTS.
CHAPTER Indicator
Chapter number for DVD playback.
OPERATING Information
Indicates title, Chapter and Track number
and Time, TV channel.
BILINGUAL Indicator
Illuminates when receiving a bilingual
broadcast.
13
STEREO Indicator
7
Illuminates when receiving a stereo
broadcast.
Controls & Display
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Rear Panel
1
2
3
4 5 6
7
8 9
10
11
AC POWER CORD
5.1 CH AUDIO OUT
1
2
Connect to the wall outlet.
7
Connect to analog Audio Inputs of Audio
AMP.
If you want to connect to TV, connect
FRONT L and R to Audio Inputs of TV.
DIGITAL AUDIO OUT
Connect COAXIAL OUT to Digital Audio
Input (coaxial type) of Audio AMP.
Or connect OPTICAL OUT to Digital Audio
Input (optical type) of Audio AMP.
ANT IN
Connect to external antenna.
8
9
ANT OUT
Connect to Antenna Input of TV.
COMPONENT VIDEO OUT
Connect to Component Video Inputs of TV.
3
4
AUDIO IN
EURO AV OUT
Connect to Euro AV input of TV.
Connect to Audio Output of VCR or Set-Top
Box.
10
11
EURO AV IN/OUT
Connect to Euro AV in/out of AV equipment
such as VCR, DVD player, etc.
VIDEO IN
5
Connect VIDEO to Composite Video Output
of VCR or Set-Top Box.
Or connect S-VIDEO to S-Video Output of
VCR or Set-Top Box.
VIDEO OUT
6
Connect VIDEO to Composite Video Input of
TV or monitor.
Or connect S-VIDEO to S-Video Input of TV
or monitor.
S-Video provides better picture quality than
composite video.
Controls & Display
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
A
Remote Controller Unit
A-B
To repeat a certain section.
ANGLE
To view with a different frame angle.
ARROW (
)
To select an item of menu.
AUDIO
To select the audio language or audio channel
when playing a DVD disc.
You can also change the audio channel of the
broadcast.
• If the NICAM broadcast is bilingual, you can
select the language.
• If the NICAM broadcast is stereo, you can switch
between NICAM stereo and Mono audio.
B
BOOK MARK
To create 9 numerical bookmarks.
C
CHANNEL DOWN/UP
Used to select the preset TV channels.
CL(CLEAR)
Used to remove the preset program on the timer
recording list.
D
DISPLAY
To view the Title, Chapter, Track information or
Subtitle Language, Audio Language.
DVD/HDD
To switch between DVD mode and HDD mode.
Controls & Display
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
E
R
RANDOM
EDIT
To play tracks of Audio CD in random order.
To edit a title or chapter of disc.
REC (Record)
To start recording.
ENTER
Used to select the menu item.
REC MODE
H
To select the record quality/recording time.
REPEAT
To select a repeat mode.
HIDE
Used to hide a chapter.
REPLAY
M
To play back again from the scene of previous 10
seconds.
MENU
It is a useful function to learn a foreign language.
Used to display the contents menu of the loaded
DVD disc or the program list of HDD.
RESTART
To play back again from the beginning of HDD
program.
MUTE
To turn on/off audio outputs.
S
N
SCAN FWD (
)
NEXT (
)
Press for fast forward scanning during playback.
To skip to the next chapter or track.
SCAN REV (
)
NUMERIC (0~9)
Used from the menu to select, Title/Chapter search
and direct track number.
Press for fast reverse scanning during playback.
SETUP
To change the initial settings.
O
SKIP
For moving to a scene of after 30 seconds.
OPEN /CLOSE (
)
SOURCE
Press button to open or close the disc tray.
If pressed under STANDBY, power is automatically
turned on.
To select an external audio and video input to use
for recording.
STANDBY/ON
Activates the unit POWER ON or into STANDBY.
P
PAUSE ( )
STEP FWD
When you press this button during playback, you
can view the still picture.
Each time you press this button, you can see the
next video frame.
Each time you press this button, you can see one
frame at a time.
STEP REV
Each time you press this button, you can see the
previous video frame.
PLAY (
)
To play the loaded disc or HDD.
PREV (
)
To skip to the previous chapter or track.
Controls & Display
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
STOP (
)
To stop a disc or HDD playing.
SUBTITLE
To select the subtitle language.
T
TIMESHIFT
To store a TV program in the HDD storage cache
temporarily.
TITLE
To display the title menu of the DVD or the
program list of HDD.
TV/DVD
To view channels selected by the recorder tuner or
by the TV tuner.
It works only when recorder and TV is connected
by European Scart cable while Video out setting is
RGB in Setup Menu.
TV MODE
Set up TV type according to type supported by
user’s TV.
Each time you press this button repeatedly, the TV
type will change among NTSC, PAL and
progressive scan.
This button works only when the disc tray is open.
Z
ZOOM
Enlarges DVD or HDD screen image up to 8 times.
Controls & Display
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection for Video Output Terminals
Composite Video (CVBS) Output
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite.
Connect “Front L” and “Front R” to AUDIO INPUT (L/R) on TV and set “Analog Output” to “ Stereo” from the
AUDIO SETUP menu.
EURO AV Output
The Euro AV terminal can be connected to the TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be
green, blue, red. The component video provides the best picture.
Set “Video Output” to “YCrCb On” from VIDEO SETUP menu.
NOTE
• RF OUT, is labeled TO TV, is signal pass-thru only.
• A S-Video cable is not supplied.
Connection
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection for Audio Output Terminals
You can enjoy the Dolby surround sound by
connecting 5.1ch audio output or digital audio
output to the audio amplifier.
5.1ch Audio Output
Use 5.1ch audio outputs for connection with your
5.1ch A/V receiver or amplifier. From the AUDIO
SETUP menu, set “Analog Output” to “ 5.1 Surround”.
Digital Audio Output
Use digital audio outputs for connection with
Dolby Digital or DTS decoder. From the Digital
Audio Output menu, select “PCM” or “Bitstream”
according to your decoder.
NOTE
• An optical cable and coaxial cable are not supplied.
Connection for A/V Input Terminals
You can record programs from AV system such
as VCR, Satellite receiver or Decoder box.
Audio Input
Connect the Audio Input to the Audio Output of
AV system.
Video Input
Connect the Composite Video or S-Video Input to
the Composite Video or S-Video Output of AV
system.
Or connect the Euro AV IN/OUT to the Euro AV
OUT of AV system.
Connection for DV IN
Using the DV IN, it is possible to read digitally the
contents of DV tapes.
DV Input
Connect the DV IN to the DV in/out jack on your
DV camcorder using a DV cable (not supplied).
Connection
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Turning on and off
Displaying disc information on
screen (OSD)
Turn on your TV and set the video input to
this recorder.
1
You can display the playback status on TV screen
as follows ; Title, Chapter number, Playing time.
Press STANDBY/ON button on the remote
Press DISPLAY button during playback.
controller or the front panel to turn on.
2
1
Title, Chapter number, Playing time, Audio
language and Subtitle appear on TV screen.
You can change the subtitle language,
You can see the on-screen information.
If you want to turn off, press STANDBY/ON
button again on the remote controller or the
front panel.
chapter, and so on using , ,
button.
,
ENTER
Selecting the HDD or DVD for
playback and recording
Press DVD/HDD button on the remote
controller to select the HDD mode or DVD
mode.
Each time you press it, the mode is changed.
The indicator in the front panel display shows
which is currently selected.
1
To turn off the on-screen display, press
DISPLAY button.
The DVD/HDD button is not available
during playing the DVD or HDD.
In this case press STOP button twice to stop
playing, and press DVD/HDD button to select
the HDD mode or DVD mode.
2
2
Screen Saver
If a bright picture does not move for a long time,
the TV may be damaged. If this state is continued
on longer than 5 minutes, the screen saver works
automatically.
The screen saver protects the CRT (Cathode Ray
Tube) from damage by displaying a moving HDD
logo continuously on the screen.
Getting started
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing a DVD disc
Playing an Audio CD
Press OPEN/CLOSE button to open the
disc tray.
Put a disc on the disc tray with logo-printed
side up.
Load an Audio CD.
The first song is played back automatically.
The track list is displayed on the TV screen.
1
1
Press OPEN/CLOSE button again to close
the disc tray.
The disc will be loaded automatically.
2
The TV screen shows disc menu.
3
Select the desired item by using , ,
,
<Audio CD>
or 0 to 9 button, then press ENTER button to
4
start playback.
Select the desired song by using
button.
or
2
3
Playing a DVD+RW or DVD+R disc
Press PLAY button to start playback.
If you press or button during
playing back, you can hear the next
song or the previous song.
Load a DVD+RW or DVD+R disc.
The menu screen is displayed automatically.
1
Select the desired program by using or
button.
2
3
4
Press ENTER button to start playback.
Press MENU or TITLE button to return to the
menu screen.
Basic Playback
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing a JPEG CD
Playing MPEG4 Movie
Load a JPEG CD.
The file list is displayed on the TV screen.
Load a MPEG4 disc.
1
1
Select the desired file by using
button.
You can see the thumbnail picture of selected
file on the right window.
or
Press Enter button after selecting the desired
movie using
,
button.
2
3
2
NOTE
• Some of MPEG4 movie could not be played depending
on encoding method.
Press PLAY button to start playback.
The JPEG files are played in order
automatically.
If you press
or
button during
playing back, you can see the next
picture or the previous picture.
Picture rotation and zoom
4
5
You can rotate the picture to the left or right
by using or button.
Also you can enlarge the picture up to 4
times or reduce it up to a quarter by using
ZOOM button.
To see the file list, press STOP button.
The file list is displayed on the TV screen.
Basic Playback
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing a program of HDD
Press DVD/HDD button to select the HDD
mode.
1
If you are playing a DVD, press STOP button
twice to stop a DVD.
And then press DVD/HDD button to select
the HDD mode.
Press PLAY button.
2
The program list of HDD appears on screen.
Select the desired program by using
button in the program list.
or
3
4
Press PLAY button.
It starts to play the selected program.
Basic Playback
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Fast Forward/Backward
Slow Forward/Backward
(DVD only)
Use this function to play the DISC or HDD contents
in fast forward or fast reverse.
There is no sound during searching.
Use this function to play the DISC contents in slow
forward.
Press
or
button during play mode.
Press PAUSE button during play mode.
The DVD Recorder pauses the playing
temporarily.
1
Each time you press the button, playback
speed changes as below.
1
2
Press
or
button.
The disc content is played slowly in reverse
or forward.
Each time you press the button, playback
speed changes as below.
Press PLAY button to resume normal
playback.
3
Frame by Frame Playback
(DVD only)
Press PLAY button to resume normal
playback.
2
Press PAUSE button during play mode.
1
2
3
The DVD Recorder pauses the playing
temporarily.
Skip Forward/Backward
Press PAUSE button repeatedly.
Each time you press, one frame is displayed
at a time.
Use this function to move to the next or previous
chapter for DVD, track for Audio CD.
Press
button during play mode.
Press PLAY button to resume normal
playback.
1
2
The DVD Recorder starts playing the
previous chapter or track.
NOTE
Press
button during play mode.
• There is no sound during viewing Frame playback or Slow
playback.
The DVD Recorder starts playing the next
chapter or track.
• Audio CD do not have Frame Playback and Slow
Playback feature.
Advanced Playback
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Select “Play List” by pressing
then press ENTER button.
Only the selected songs are displayed on the
list window.
button,
Program Playback (Audio CD only)
5
This feature lets you program the play order of
folders, tracks on a disc.
Load an Audio CD.
1
2
The first song is played back automatically.
The track list is displayed on the TV screen.
Select the desired song by using
or
button in the track list, then press ENTER
button.
A mark is put on the selected song.
Press PLAY button to play the program
list.
It starts playback of a saved program list.
Program playback remains active until you
open the disc or turn off the DVD recorder.
6
7
To delete a song from the program list,
select the song you want to delete by
using
,
,
,
button, then press
ENTER button. A mark is put on the
selected song.
Repeat step 2 if you want to select other
songs.
3
4
Select “Delete” by using
press ENTER button.
The selected songs are erased from the
program list.
,
,
,
button,
Press
button, then select “Add” by
pressing
button.
Press ENTER button to add the selected
songs to the program list.
The mark on the selected songs is changed
to the triangle.
To return to the original list, select “File List”
by using
,
,
,
button, then press
8
ENTER button.
Advanced Playback
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Selecting Subtitles (DVD only)
Selecting Audio Languages
(DVD only)
It is possible to change the audio language to a
different language from the one selected at the
initial settings. This operation works only with discs
on which multiple audio languages are recorded.
If the loaded disc supports multiple audio
It is possible to change the subtitle language to a
different language from the one selected at the
initial settings. This operation works only with discs
on which multiple subtitle languages are recorded.
If the loaded disc supports multiple subtitles, you
can select the subtitle language.
languages, you can select the audio language.
Press SUBTITLE button during playing.
1
Press AUDIO button during playback.
The audio information is displayed on the top
of screen.
1
2
Select the subtitle language by using
button, then press ENTER button.
The subtitle is displayed on the bottom of
screen.
,
2
Select the audio language by using
button, then press ENTER button.
The audio language is changed.
,
NOTE
• Some discs only allow you to change subtitle or audio
language from the disc menu.
To turn off the subtitle, select “OFF” by using
button, then press ENTER button.
,
3
Advanced Playback
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Repeating a Title, Chapter
A-B Repeat
(DVD/Audio CD disc only)
It is possible to repeat the chapter/title for DVD or
track/disc for Audio CD.
Use this function to repeat the play of a selected
segment. This is very useful for studying foreign
languages because it repeats the selected
segment until canceled.
Press REPEAT button during playback.
1
2
The repeat information is displayed on the
top of screen.
Press A-B button at the point of where
repeat play is to start.
The starting point of your selected segment
is set up.
1
Each time you press REPEAT button, the
repeat mode is changed as follows.
Press A-B button again at the point of
where repeat play is to end.
The ending point is set up.
It is played repeatedly from A to B.
2
To cancel the A-B repeating, press A-B
button once more.
The playing state changes to normal.
3
NOTE
• We recommend you set up the desired segment within
a minimum 5 seconds for smooth repeat play.
NOTE
• With some DVD discs, there may be times when repeat
playback is not possible.
Advanced Playback
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
ZOOM screen (DVD/HDD only)
Switching the Camera Angle
The zoom function allows you to enlarge DVD or
HDD screen image up to 8 times.
When a DVD contains recorded multiple angles of
a scene, you can select the Angle function.
Press ZOOM button during playback.
Press ANGLE button during playing.
1
The picture is zoomed.
1
2
Available angles of the current scene will be
displayed on the top of screen.
Each time you press
is changed.
,
button, the angle
NOTE
• You can only change the angle for DVDs that provide
multiple angles of scenes.
• The angle function will not work on DVD video discs that
do not contain recorded multiple angles.
Each time you press ZOOM button, the
zoom mode will be changed :
2
You can move the image by using
button.
,
,
,
3
4
To cancel the zoom mode, press ZOOM
button repeatedly until the recorder resume
to normal playback.
Advanced Playback
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Direct Search (DVD only)
Bookmark
You can select a specific chapter or title to play.
Also you can move to a specific time in a track or
title.
You can find the desired scene of movie easily.
Press BOOKMARK button at the point of
where you want to see later during
playback.
The bookmark information is displayed on
the top of screen.
1
Press DISPLAY button during playback.
The playback information appears on TV
screen.
1
You can create up to 9 numerical
bookmarks.
Select a bookmark to see the desired
scene by using or button, then press
ENTER button.
It starts to play back from the specified
bookmark.
2
Title Search
To cancel a bookmark, press CL button after
selecting it.
2
1
2
Select “TITLE” by pressing
,
button
3
Enter the title number by using numeric 0
to 9 button.
It starts to play back from the specified
title.
Chapter Search
1
Select “CHAPTER” by pressing
,
button.
2
Enter the chapter number by using
numeric 0 to 9 button.
It starts to play back from the specified
chapter.
Time Search
1
2
Select “TIME” by pressing
,
button.
Enter the time by using numeric 0 to 9
button.
For example, if you want to go to
00:31:25, press the numeric buttons in
this order (0, 0, 3, 1, 2, 5).
It starts to play back from the specified
time.
Advanced Playback
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Press SOURCE button to choose the A/V
source you want to record.
Every time this button is pressed, the A/V
source is changed :
Basic recording
4
To record TV programs, you should search TV
channels first.
Press DVD/HDD button to select the
HDD(Hard Disk Drive) or a recordable
DVD (DVD+R/DVD+RW) on which you
want to record.
1
If you want to record on the HDD, press
TV/DVD button for HDD to be displayed on
TV screen.
If you want to record on DVD, load a
DVD+RW or DVD+R disc with enough free
space for the recording.
2
ꢀ
If you load a new blank disc, it asks for
formatting the disc.
Press ENTER button after selecting “OK”.
ꢀ
If the DVD menu is displayed on TV screen
automatically, press STOP button twice to
stop.
If you want to record the TV program, select
TV mode.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
Press REC MODE button to set the record
quality/recording time.
Every time this button is pressed, the record
quality/recording time is changed as follows.
3
Press REC button to start your recording.
5
6
Press PAUSE button if you want to stop the
recording for a short while.
Press again PAUSE button to continue
recording.
ꢀ
HQ (High Quality) : Highest quality, you
can record for up to 1 hour in a blank disc.
SP (Standard Play) : Good quality,
sufficient for most applications, you can
record for up to 2 hours in a blank disc.
LP (Long Play) : Slightly lower quality than
SP, you can record for up to 3 hours in a
blank disc.
ꢀ
ꢀ
Press STOP button to stop your recording.
ꢀ
NOTE
EP (Extended Play) : Slightly lower quality
than LP, you can record for up to 4 hours in
a blank disc.
• A DVD+R/DVD+RW can record for up to 6 hours, up to
49 titles.
ꢀ
SLP (Super Long Play) : Use when
• If your source is copy-protected, you will not be able to
record it.
maximum recording time is most important,
you can record for up to 6 hours in a blank
disc.
Recording
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Press
or
button to select a new timer
OTR (One touch Timer Recording)
program, for example ‘----’, and then press
3
4
button.
During basic recording, press REC
button.
1
Every time you press REC button, the
recording time will increase by 30 minutes.
It is possible to record for up to 3 hours if
there is enough room on the disc or HDD.
The DVD Recorder will stop automatically
after recording for a specific time.
Enter the timer recording settings.
If you want to cancel OTR, press STOP
button.
Use
,
button to select a field, use
,
2
button to change the value.
ꢀ
Date
Press
or
button to select how often
Timer Recording
you want to make the recording, for
example, once, daily, weekly.
If you want the once recording, enter the
date by using 0 to 9 button.
For timer recording, the clock, date, and stations
must be set correctly.
If you want to record on DVD, load a DVD+RW or
DVD+R disc with enough free space for the
recording.
ꢀ
ꢀ
ꢀ
Start Time
Enter the start time by using 0 to 9 or
button.
,
Press SETUP button.
End Time
Enter the end time by using 0 to 9 or
button.
1
,
Press button after choosing “Timer
Record” in the RECORD menu.
2
Source
Select the Source by using
If you want to record the TV program, select
the TV source by using or button.
You can see the timer recording screen. This
screen shows all the timer programs
currently set.
or
button.
And then select the TV channel by pressing
CHANNEL-/+ button.
ꢀ
ꢀ
REC Mode
Select REC MODE by using
button.
or
REC To
Select HDD for hard disk recording or DVD
for DVD recording by using or button.
Recording
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
ꢀ
VPS/PDC
Timer review - changing and
erasing record settings
The VPS/PDC system automatically adjusts
the recording time so that even if a program
is not running to schedule you won’t miss it.
For VPS/PDC to work properly, you must
input the correct announced time and date
of the program you want to record.
Note that VPS/PDC may not work with
every station.
Press SETUP button.
1
Press button after choosing “Timer
Record” in the RECORD menu.
2
ꢀ
You can see the timer recording screen.
This screen shows all the timer programs
currently set.
If you want to change any of the details,
move to the details you want to change by
using or
setting using
button. Then change the
or 0 to 9 button.
Press ENTER button after selecting “Save” if
all the settings are correct.
5
6
7
Press SETUP button to exit the timer
recording screen.
Switch off your DVD Recorder by pressing
STANDBY/ON button.
Select the program you want to change or
NOTE
erase by pressing
or
button.
3
4
• You can switch on your DVD Recorder again if you
want to set the timer to record another program.
Remember to switch off the DVD Recorder when you
have finished.
Erasing a setting
Press CL button to erase. It asks for
confirmation again.
• To stop a recording which has already started, press
STOP button.
Press ENTER button after selecting “Yes”.
• You can pre-program the timer recording up to 8
programs.
Changing a setting
5
Press button to change a setting.
Select the details you want to change by
pressing or button, then use
,
or
the number buttons 0 to 9 to change the
settings.
When you have made all the changes, press
ENTER button after selecting “Save”.
Press SETUP button to exit.
6
Recording
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Find the place on the camcorder tape that
you want to start recording from.
You can use the remote controller for this
recorder to control the camcorder using
Recording from a DV
(Digital Video) camcorder
4
You can record the contents of DV tape from a DV
camcorder.
Make sure your digital camcorder is connected to
DV IN jack on the front panel.
Also turn on your DV camcorder and set it to PLAY
(or VCR) mode.
PLAY, STOP, PAUSE,
,
button
when the information of DV is displayed on
the top of screen. If the information of DV
disappears, press DISPLAY button to show
it.
Press DVD/HDD button to select the
HDD(Hard Disk Drive) or a recordable
DVD (DVD+R/DVD+RW) on which you
want to record.
1
Press REC button at the point from which
you want to record during playback of DV
tape.
5
6
If you want to record on DVD, load a
DVD+RW or DVD+R disc with enough free
space for the recording, and press STOP
button twice to stop.
Press STOP button to stop your recording.
Press REC MODE button to set the record
quality/recording time.
NOTE
2
• Depending on the connected camcorder, you may not
be able to control it using the remote control supplied
with this recorder.
Press SOURCE button to choose DV IN.
3
Every time this button is pressed, the A/V
source is changed :
If you want to record the TV program, select
TV mode.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
Recording
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Timeshift Recording
Copying (from HDD to DVD)
You can store a TV program in the HDD storage
cache temporarily.
Do not miss a scene from a live broadcast. If the
telephone rings while you are watching
your favorite live broadcast, just press TIMESHIFT
or PAUSE button before answering the phone.
The timeshift function will be activated and the
broadcast is then recorded for later viewing.
After the phone call or viewing interruption, press
Use the copying feature of this recorder to :
• Back up important recordings stored on the HDD
to a DVD.
• Make a DVD copy of a recording on the HDD to
play in another DVD player.
Load a DVD+RW or DVD+R disc with
enough free space for the recording.
1
If the DVD menu is displayed on TV screen
automatically, press STOP button twice to
stop.
PLAY or
button to watch the program.
Press PAUSE or TIMESHIFT button while
watching a TV program.
1
2
Press DVD/HDD button to select the HDD
mode.
2
Press PLAY or
program.
button to watch the
Press PLAY button. The program list of HDD
appears on screen.
You can watch from the beginning of
recorded program.
Also you can search a scene using
button.
3
,
Select the program to copy by using
or
button, and Press
button.
4
The edit menu appears on screen.
Press STOP button to exit Timeshift
function.
The current broadcast is displayed on the
screen.
3
Select “Dubbing” by using
or
button, and press ENTER button.
It asks for confirmation again.
5
6
Press ENTER button after selecting “Yes”.
NOTE
• Note that you must back up important recordings to
DVD+R/RW discs because the HDD is not designed to
provide permanent storage for your recordings.
Recording
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
(DVD+R/DVD+RW/HDD)
ꢀ
Protect Disc
Editing the title of DVD+R/DVD+RW
You can prevent the contents of disc from
being deleted by mistake.
Load a DVD+RW or DVD+R disc.
Select “Protect Disc” by using
or
1
The DVD menu screen is displayed
automatically.
button, and press ENTER button.
If you want to unprotect the protected disc,
press ENTER button after selecting
“Unprotect Disc”.
Select the title to edit by using
button.
or
2
3
ꢀ
Close Disc (DVD+R only)
If you want to make your DVD+R disc
compatible with the other DVD Player, you
should go on Close Disc operation.
Press EDIT button. The disc edit menu
appears on screen.
Select “Close Disc” by using
or
button, and press ENTER button.
It takes a couple of minutes to finalize the
disc.
- This function only works once in DVD+R
disc.
- If a DVD+R disc has been finalized, you
can not record or edit the DVD+R disc
any more.
ꢀ
Make Compatible (DVD+RW only)
<DVD+RW>
If you want to make your DVD+RW disc
compatible with other DVD+RW recorder,
you should go on Make Compatible
operation.
Select “Make Compatible” by using
or
button, and press ENTER button.
It takes a couple of minutes to make the
disc compatible.
- This function only works in DVD+RW
disc.
- If you do not make your DVD+RW
compatible, you can only play back it in
this DVD Recorder.
<DVD+R>
ꢀ
Erase Title
ꢀ
Play Full Title
Select “Erase Title” by using
button, and press ENTER button.
or
Select “Play Full Title” by using
or
button, and press ENTER button to play
back the entire title (including hidden
chapters) from the disc.
ꢀ
Protect Title
You can prevent the contents of title from
being deleted by mistake.
Select “Protect Title” by using
or
button, and press ENTER button.
If you want to unprotect the protected title,
press ENTER button after selecting
“Unprotect Title”.
Recording
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
(DVD+R/DVD+RW/HDD)
ꢀ
Edit Title Name
Press EDIT button during playback. The title
edit menu appears on screen.
3
1
Select “Edit Title Name” by using
or
button, and press ENTER
button.
The keyboard will show on the screen.
ꢀ
Insert Chapter
Select “Insert Chapter” by using
or
button, and press ENTER button at the
point where you would like to insert a new
chapter.
2
3
4
Select a letter which you want to input
by using button, and press
ENTER button to confirm it.
,
,
,
ꢀ
ꢀ
ꢀ
Delete Chapter
Select “Delete Chapter” by using
or
Repeat step 2.
The maximum length of the title name is
up to 17 characters.
button, and press ENTER button at the
point where you would like to remove the
chapter.
After the inputting of letters is finished,
press ENTER button after selecting
“Done”.
Hide Chapter
It is useful function to hide commercials.
Select “Hide Chapter” by using
or
ꢀ
Upload to HDD
You can copy a program from DVD to HDD.
Select “Upload to HDD” by using
button, and press ENTER button.
button, and press ENTER button at the
point where you would like to hide a chapter.
or
Show Chapter
This function is available during playback
the entire title including hidden chapters.
Press EDIT button to return to the DVD
menu screen.
1
Press TITLE or MENU button. The
DVD menu screen is displayed.
4
2
Select the title including hidden
chapters by using
press EDIT button.
or
button, and
Editing the chapter of DVD title
3
4
5
Select “Play Full Title” by using
button after, and press ENTER button.
or
Load a DVD+RW or DVD+R disc.
The DVD menu screen is displayed
automatically.
1
2
Press EDIT button during playback. The
title edit menu appears on screen.
Select “Show Chapter” by using
button, and press ENTER button at the
chapter where you want to show.
or
Select the title to edit by using
or
button, and press ENTER button to start
playback.
Editing (DVD+R/DVD+RW/HDD)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
(DVD+R/DVD+RW/HDD)
ꢀ
Change Thumbnail
• Edit Name
You can create a new thumbnail or change
the thumbnail for the selected title.
Select “Change Thumbnail” by using
1
2
3
4
Select “Edit Name” by using
button, and press ENTER button.
The keyboard will show on the screen.
or
or
button, and press ENTER button
Select a letter which you want to input
at the point where you prefer to be the
thumbnail.
by using
,
,
,
button, and press
ENTER button to confirm it.
Repeat step 2.
The maximum length of the program
name is up to 14 characters.
Editing the program of HDD
After the inputting of letters is finished,
press ENTER button after selecting
“Done”.
Press DVD/HDD button to select the HDD
mode.
1
Press PLAY button. The program list of HDD
appears on screen.
2
Select the program to edit by using
or
button, and Press
button.
3
The edit menu appears on screen.
ꢀ
Delete
1
Select “Delete” by using
or
button, and press ENTER button.
It asks for confirmation again.
2
Press ENTER button after selecting
“Yes”.
ꢀ
Dubbing
You can copy a program from HDD to
DVD.
1
2
Load a DVD+RW or DVD+R disc.
Select “Dubbing” by using or
button, and press ENTER button.
It asks for confirmation again.
3
Press ENTER button after selecting
“Yes”.
Editing (DVD+R/DVD+RW/HDD)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Once the initial settings have been completed, the
DVD recorder can always be operated under the
same conditions whenever the power is switched
on. These settings are called SETUP data that are
easily modified and stored using the SETUP menu.
The SETUP menu includes the information for
System, Video, Audio, Security, Record, Disc.
SYSTEM
Basic Operations
Press SETUP button during stop mode. And use
,
,
,
and ENTER button to navigate and
select options. The current setting for any option is
marked with a colored box.
OSD LANGUAGE
1
2
This item is used to select the language for
On-Screen Display messages that will be
displayed on the TV screen. When your
desired language is selected, all OSD
messages are displayed in the selected
language.
Press STOP button, if the disc is being
played.
1
To call the SETUP menu, press SETUP
button.
2
SET TIME
Select the desired item by using
button, then press button.
or
3
4
5
ꢀ
Automatic clock setting
Some TV channels broadcast time signals
together with the program. This recorder
can use these signals to set the clock
automatically.
Select the desired sub item by using
and ENTER button.
,
,
,
Press SETUP button after you have made all
settings.
Press ENTER button after selecting
“Automatic”.
1
NOTE
It starts to search the preset channel that
broadcasts a clock signal automatically.
• Depending on the disc, some setup menu selections
may not work properly.
If the time could not be set automatically,
select “Manual”.
2
ꢀ
Manual clock setting
If no station in your area are broadcasting
time signals, you can set the clock
manually.
Enter the date & time by using 0 to 9
1
or
Use 0 to 9 or
the value in the highlighted field.
,
,
,
button.
,
button to change
Use
,
button to move from one field
to another.
Using the Setup Menu
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Press ENTER button after selecting
“Save”.
2
VIDEO
FACTORY RESET
3
Returns the DVD Recorder back to factory
default settings.
Press ENTER button after selecting
“Start”.
1
It asks for the password.
Enter the current password in 4 digits
by using 0 to 9 button.
2
If you have not changed the password,
enter 1, 2, 3, 4.
The setup menu screen is exited
automatically after factory reset.
CHANNEL SCAN
This recorder has a built-in TV tuner for
recording TV programs.
1
ꢀ
Press ENTER button after selecting
“Start”.
It will search channels automatically.
If the broadcasting is found during auto
searching, it is stored automatically.
NOTE
• While doing Channel Search, it will erase and replace
all previously stored channels.
CHANNEL SETUP
2
(If there is no captured channel, this feature
is not available.)
Press button, and the channel list will
show on the TV screen.
1
Using the Setup Menu
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Select the channel you want to modify
Fine tune
2
by using
or
button.
If the captured signal is not good, you can
tune the channel fine.
The information of the selected channel
will show on the right of the channel list.
1
Select “Fine tune” by using
or
Changing the program number
button.
2
Tune the channel fine by pressing
or button.
Each time or
channel frequency decreases or
increases by 50KHz.
You can change the program number
assigned to the current preset.
button is pressed, the
1
Select “Prog Num” by using
or
button.
2
Enter the new program number by using
0 to 9 button.
Press ENTER button after selecting
3
4
“Save” using
button if all the settings
Editing the channel name
are correct.
1
Press
“CH Name” by using
or button after selecting
or button.
Deleting a channel
You can delete a captured channel on
the channel list.
The keyboard will show on the screen.
2
3
4
Select a letter which you want to input by
1
2
Select a channel on the channel list by
using
,
,
,
button, and press
using
or
button.
ENTER button to confirm it.
Press CL button. The channel is deleted.
Repeat step 2.
The maximum length of the channel
name is up to 4 characters.
Sorting channels
(If there is no captured channel, this
feature is not available.)
You can sort the channel’s position on
the channel list.
5
After the inputting of letters is finished,
press ENTER button after selecting
“Done”.
1
2
Select a channel on the channel list by
TV System
using
or
button, and press
button.
Set the TV system used for the current
channel.
Select “Prog Num” by using
or
button.
1
Select “TV System” by using
or
button.
Enter a desired program number by using
0 to 9 button.
2
Select the TV system by using
button.
or
3
4
Press ENTER button after selecting
“Save” using
The menu options appears on TV screen.
button.
Decoder
Press ENTER button after selecting
“Insert” from options.
If the current channel is scrambled, requiring
a Canal+ decoder connected to the A/V IN
connector, set this to “On”.
Using the Setup Menu
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
SCREEN FORMAT
AUDIO
3
If you have a widescreen TV, select the “16:9
Wide” setting. The wide widescreen DVD
disc is shown using the full screen area.
When playing the DVD disc recorded in
conventional format (4:3), the settings on
your TV will determine how the material is
presented. (See the manual that came with
your TV for details on what options are
available.)
If you have a conventional TV, choose either
“4:3 Letter Box” or “4:3 Pan Scan”.
In Letter Box mode, the widescreen DVD
disc is shown with black bars at the top and
bottom of the screen.
Pan Scan chops the sides off widescreen
material to make it fit the 4:3 screen (so even
though the picture looks larger on the screen,
you are actually seeing less of the movie).
ANALOG OUTPUT
ꢀ
1
Stereo : Should be selected when you
enjoy conventional 2 channel stereo audio
by connecting the unit’s audio output to a
stereo amplifier/receiver or TV, or when you
duplicate audio of a DVD video disc recorded
with surround audio to your MD, cassette, etc.
NOTE
ꢀ
5.1 Surround : When you enjoy multi
channel surround audio by connecting the
unit’s 5.1channel audio outputs to an
amplifier equipped with 5.1 channel inputs.
• Some disc will not allow you to change the screen format.
VIDEO OUTPUT
4
Set to “YCbCr On” to view in component
video via Y/ Cb/ Cr connector. When using
AV Euro connector RGB signal, set to “RGB
On”.
DIGITAL OUTPUT
ꢀ
2
3
PCM : The decoded audio stream will be
outputted through the digital audio out
connector.
ꢀ
Bit Stream : The original audio stream
COUNTRY SETUP
Press ENTER button after selecting your
recorded on the disc is outputted through
the digital audio out connector.
5
country using
or
button.
SAMPLING FREQUENCY
You only need to make this setting if you
connected this recorder to an AV amplifier (or
other component) using the digital audio
output. If your AV amplifier (or other
connected component) is compatible with
high sampling rate audio (96KHz), set to
“96KHz”, otherwise set to “48KHz”.
DRC (Dynamic Range Compression, only
Dolby Digital DVD)
Signifies the dynamic range of Dolby Digital
sound. Used when it is difficult to hear
dialogues through stereo system or TV.
4
Using the Setup Menu
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
EQUALIZER
You can adjust the equalization curve and
store it.
Enter the current password in 4 digits
by using 0 to 9 button. A rating level
change will be done.
2
5
If you have not changed the password,
enter 1, 2, 3, 4.
1
2
3
Select the frequency of which you want to
adjust the tone by using or button.
Press or button to adjust the
equalization.
SET PASSWORD
2
Press ENTER button after selecting
“SAVE” to store the equalization curve.
Press button after selecting
“Change” .
1
The password window appears on TV
screen.
SECURITY
Enter the current password in 4 digits by
using 0 to 9 button.
2
RATING
1
This function is to disable the playing of
specified DVD discs that are unsuitable for
children.
There are a total of 8 levels. If the level is 8,
the contents of the disc are suitable for adult.
If the level is 1, the contents of the disc are
suitable for children.
Enter the new password in 4 digits by
using 0 to 9 button.
3
Re-enter the new password for verify.
The password is changed.
4
Used to adjust the level of parental lock.
Once selected, whenever you play a disc,
the selected rating level is compared to the
level on the disc. If the level you selected is
greater than the level of the disc, you may
play the loaded disc. If not, you may not play
the disc. To set appropriate rating level do
the following instructions.
Press ENTER button after selecting
the proper rating level by using
1
or
button.
The password window appears on TV
screen.
Using the Setup Menu
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
RECORD
DISC
RECORD QUALITY
AUDIO LANGUAGE
1
The record quality offers 5 quality level :
1
2
3
Set this value to the preferred audio
language. If an audio language is selected,
whenever you start playing a new disc, the
selected audio language is played. (if the
selected language is contained in the disc)
ꢀ
HQ : High Quality, you can record for up to
1 hour in a blank disc.
ꢀ
SP : Standard Play, you can record for up
to 2 hours in a blank disc.
ꢀ
SUBTITLE LANGUAGE
Set this value to the preferred subtitle
language. If a subtitle language is selected,
whenever you start playing a new disc, the
selected subtitle language is played. (if the
selected language is contained in the disc)
LP : Long Play, you can record for up to 3
hours in a blank disc.
ꢀ
EP : Extended Play, you can record for up
to 4 hours in a blank disc.
ꢀ
SLP : Super Long Play, you can record for
up to 6 hours in a blank disc.
DVD AUTO CHAPTER
MENU LANGUAGE
2
3
When “Auto Chapter” is set to “5Min”,
chapters are created automatically within a
title at five-minute intervals.
Set this value to the preferred disc menu
language. If a disc menu language is
selected, whenever you start playing a new
disc, the selected disc menu language is
played. (if the selected language is contained
in the disc).
TIMER RECORD
See section “Timer Recording”.
AUTO PLAY
4
5
Set to “On” to play the disc automatically
whenever it loads.
INITIALIZE DVD (DVD+RW only)
When you first load a blank DVD+RW disc,
you should initialize it.
Press ENTER button after selecting
“Start” by pressing button.
1
It asks for confirmation again.
Using the Setup Menu
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Press ENTER button after selecting
“Yes”.
SCANDISK HDD
You can scan the disk of HDD whether the
data is broken or not.
2
8
NOTE
Press ENTER button after selecting
“Start” by pressing button.
It asks for confirmation again.
1
• Initializing a disc will erase everything recorded on it.
Make sure there is nothing on the disc that you want to
keep.
• You may not be able to re-Initialize a disc if it was
initialized on other brand DVD recorders.
Press ENTER button after selecting
“Yes”.
2
It starts to scan the disk of HDD.
FINALIZE DVD (DVD+R/RW only)
6
If you want to make your DVD+R or
DVD+RW disc compatible with the other
DVD Player, you should go on FINALIZE
operation.
Press ENTER button after selecting
“Start” by pressing button.
1
It asks for confirmation again.
Press ENTER button after selecting
“Yes”.
2
It takes a couple of minutes to finalize the
disc.
NOTE
• If a DVD+R has been finalized, you can not record or edit
the DVD+R any more.
• If DVD+R disc is loaded, this function works same as
“Close Disc” on disc editing menu.
• If DVD+RW disc is loaded, this function works same as
“Make Compatible” on disc editing menu.
FORMAT HDD
7
If the HDD file system becomes corrupted for
some reason, you can format the HDD to fix
the problem. Note that formatting the HDD
will erase all the data on it.
Press ENTER button after selecting
“Start” by pressing button.
1
It asks for confirmation again.
Press ENTER button after selecting
“Yes”.
2
It starts to format the HDD.
Using the Setup Menu
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications
DVD/DVD, CD-DA, CD, CD-R/CD-RW,
DVD+R/RW
Supported disc types
Supported video formats
TV system
MPEG-1, MPEG-2, JPEG
PAL / SECAM
Power requirements
AC 100 V-240 V, 50/60 Hz
35 W
General
Power consumption
Weight
3.9 kg
Dimensions
420(W) x 44(H) x 290(D) mm
Operating temperature
Operating humidity
5°C to 35°C
10 % to 75 % (no condensation)
Recording format
DVD VIDEO
Recording
Recordable media
Programs
DVD+R, DVD+RW, HDD (120GB)
8 Programs
Timer
Clock
Quartz lock (24-hour digital display)
Power off memory
Approx. 1 hour 30 min.
This connector provides the video and audio
Euro AV connectors
(21-pin connector)
AV connector input / output x 1
signals for connection to a compatible color
AV connector output x 1
Y (luminance) - Output level
C (color) - Output level
Jacks
TV or monitor.
1.0 Vp-p (75 Ω)
0.286 Vp-p (75 Ω)
S-VIDEO jack
S-Video output
Video Output
Output level
1.0 Vp-p (75 Ω)
RCA jack
Jacks
Component video output (Y, Cb/Pb, Cr/Pr)
Output level
Y: 1.0 Vp-p (75 Ω)
Cb/Pb, Cr/Pr : 0.7 Vp-p (75 Ω)
Output level
2 Vrms (1 kHz, 0 dB)
Audio output
Number of channels
Jacks
5.1 Channels
RCA jack
Frequency response
S/N ratio
4 Hz to 44 kHz (DVD fs: 96 kHz)
100 dB
Audio characteristics
Dynamic range
95 dB
Total harmonic distortion
Optical digital output
Coaxial digital output
IEEE 1394 standard
Audio/Video cable
RF Cable
0.03 %
Optical digital jack
Digital output
DV input
RCA jack
4 pin
1
1
1
1
2
1
Scart Cable
Accessories
Remote control unit
“AA” size batteries
Operating Instructions
NOTE
• The specifications and design of this product are subject to change without notice, due to improvement.
Additional Information
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Inspect the
other components and electrical appliances being used. If the trouble cannot be rectified after checking the
items below, ask your nearest authorized service center or your dealer to carry out repair work.
Problem
Solution
The disc is ejected automatically after
loading.
• Dirty or damaged disc
Disc not seated properly in the disc
guide.
• Align the disc properly.
• If the region number on a DVD-Video disc does not match the number on the
player, the disc cannot be used.
Incompatible region number.
• Allow time for condensation to evaporate. Avoid using the player near an air-
Condensation inside the player.
conditioning unit.
• Playback is not possible.
Disc is loaded upside down.
mark appears on screen.
• Reload the disc with the label side face up.
• The operation is prohibited by the player and / or disc.
• Switch the power off once using the front panel STANDBY/ON button and then
switch on again using the front panel STANDBY/ON button.
• Disconnect the power plug and reinsert it back into the wall.
Picture playback stops and the
operation buttons cannot be used.
• Some settings can be changed while a disc is playing, but are not effective
until the disc is stopped then restarted.
• This is not a malfunction. Make the same setting when the player is stopped.
New settings made in the Setup screen
menus while a disc is playing are
ineffective.
• When the power is cut due to power failure or by unplugging the power cord,
settings will be canceled.
Settings are canceled.
• Incorrect video connections. Check that connections are correct and that plugs
are inserted fully.
• TV/monitor or AV amplifier settings are incorrect. Check the instruction manual
of the connected equipment.
• The Component output menu is set to progressive but your TV/monitor is not
compatible with progressive scan.
No picture / No color
• Reconnect the player to your TV using a composite or S-Video cord and set
the TV to appropriate input.
• The type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
• The disc is recorded fully.
The DVD recorder cannot record.
• The DVD+R has been finailized.
Screen is stretched or aspect does not
change.
• The TV aspect ratio setting in the Setup menu is incorrect. Set the TV aspect
ratio option to match the TV/monitor you're using.
• This player is compatible with Macro-Vision System copy guard. Some discs
include a copy prevention signal, and when this type of disc is played back,
stripes etc., may appear on some sections of the picture depending on the TV.
Picture disturbance during playback or
dark.
Additional Information
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Problem
Solution
• The remote control is too far from the player, or the angle with the remote
sensor is too wide.
The remote control doesn't seem to
work.
Use the remote within its operating range.
• The batteries are exhausted. Put in new batteries.
Some DVD discs do not output digital audio.
• Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
• Clean the disc.
Interconnects are not fully inserted into the terminals (or are not connected).
• Check that all interconnects are firmly inserted.
Dirty or oxidized plugs/terminals.
• Clean the plugs/terminals.
No audio, or audio is distorted.
Incorrect audio cable connection.
• Check the audio connections.
Player's output is connected to the amplifier's phono (turntable) inputs.
• Connect to any set of inputs except phono.
The disc is paused.
• Press (play) to exit the pause mode.
Incorrect amplifier settings.
• Check that the volume is turned up ,that the speakers are on, the input function
set correctly, etc.
Incorrect Audio menu settings.
The analog audio is OK, but there
appears to be no digital audio signal.
• Make sure that the Digital Audio Out setting is set to PCM or Bitstream.
Check that the PCM or Bitstream settings are suitable for your amplifier
-check the amp’s instruction manual.
Noticeable difference in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a malfunction.
• If this unit is connected to a non-DTS compatible amplifier or decoder using a
digital audio cable, please connect to a DTS compatible amplifier or decoder.
If you do not do this, noise will be output if you try and play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder using a
digital audio cable, check the amplifier settings, and that the cable is properly
connected.
No DTS audio output.
NOTE
• Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then
plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your
nearest service center.
Additional Information
42
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY and
SUPPORT
Updates
Please check out regularly our web site for further updates and assistance about this product: www.hb-direct.com.
Important safety information
Read these instructions carefully and pay attention to all warnings and guidelines.
Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock.
Never insert objects into the DVD player's cabinet door. They might come into contact with dangerous voltage points or short-circuit
components, which can cause fire or electric shock.
Do not spill liquids on the DVD player.
If the DVD Player does not function normally, or if it emits unusual sounds or odors, pull out the plug immediately and contact an
authorized technician.
Do not attempt to service the DVD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and
other hazards. All maintenance must be carried out by qualified service technicians.
Environmental information
The system is made of recyclable materials which can be reused if disassembled by authorized personnel.
Please follow local regulations for the disposal of packaging materials, used batteries and discarded units.
Copyright
This product contains copyright technology which is protected pursuant to the patents that are the property of Macrovision Corporation and
other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended
for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited.
Made under license from Dolby Laboratories. “Dolby” and the double “D” symbol are trademarks of Dolby Laboratories.
Warranty certificate
H&B provides a twelve (12) month warranty from the date of purchase against material and manufacturing defects.
In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product.
If any problems arise, information on our authorized service centers is available the dealer who sold the product.
Terms of Warranty
1. The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the serial number on the
product is fully legible.
2. The obligations of H&B are limited either to repair or replacement of defective components. The repair or replacement of defective
components is based on an assessment by H&B.
Exchange is only possible if the repair cannot be performed.
3. Warranty repairs must be performed by an authorized H&B dealer, or an authorized service centre. No remuneration is provided for
repairs performed by unauthorized workshops.
Any repairs or damage to the product caused by unauthorized intervention are not covered by this warranty.
4. This product will not be viewed as defective, either in materials or in manufacture, if adaptation to national, local, technical or safety-
related requirements is required in countries other than the specific country for which the product was originally designed and
manufactured.
5. This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any
consequential damages. The warranty does not cover the following:
a. Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear.
b. Costs connected to transport, disassembly or installation of the product.
c. Misuse, including use for other purposes than was intended or faulty installation.
d. Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation or
other causes beyond the control of H&B.
6. This warranty applies to every legal owner of the product during the warranty perio.
Distributor
H&B products are distributed by:
Bat 566 93400 Saint Ouen FRANCE
JPF Entertainment
Tel + 33 1 49 489 340
Fax + 33 1 40 109 599
Additional Information
43
Download from Www.Somanuals.com. All Manuals Search And Download.
|