Kobe Range Hoods Ventilation Hood CH0130SQB 30 User Manual

KOBE Brand Range Hood  
Model No.: CH0130SQB (30'')  
CH0136SQB (36'')  
CH0142SQB (42'')  
CH0148SQB (48'')  
CH-101 SERIES – 18'' HEIGHT  
INSTALLATION INSTRUCTIONS  
AND OPERATION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- READ AND SAVE THESE INSTRUCTIONS -  
CONTENTS  
IMPORTANT SAFETY INSTRUCTIONS.........................ERROR! BOOKMARK NOT DEFINED.  
COMPONENTS OF PACKAGE ................................................................................................. 3  
INSTALLATION ......................................................................................................................... 4  
UNDER THE CABINET INSTALLATION .................................................................................6  
STAND ALONE INSTALLATION.............................................................................................9  
OPERATING INSTRUCTIONS ................................................................................................ 12  
MAINTENANCE..............................................................ERROR! BOOKMARK NOT DEFINED.  
SPECIFICATIONS................................................................................................................... 16  
MEASUREMENTS & DIAGRAMS............................................................................................ 17  
PARTS LIST ............................................................................................................................ 22  
CIRCUIT DIAGRAM................................................................................................................. 27  
DISCLAIMER........................................................................................................................... 29  
WARRANTY ............................................................................................................................ 30  
PRODUCT REGISTRATION.................................................................................................... 32  
- READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING -  
A L L W I R I N G M U S T B E D O N E B Y A P R O F E S S I O N A L A N D I N  
A C C O R D A N C E W I T H N A T I O N A L A N D L O C A L E L E C T R I C A L C O D E S .  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -  
WARNING:  
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL  
INJURY, OBSERVE THE FOLLOWING:  
1) Installation and electrical wiring must be done by qualified professionals and in accordance  
with all applicable codes and standards, including fire-rated construction.  
2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or  
other hidden utilities.  
3) Ducted fans must be vented to the outside.  
a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT  
SERVICE PANEL.  
b) Clean grease laden surfaces frequently. To reduce the risk of fire and to disperse air  
properly, make sure to vent air outside. DO NOT vent exhaust air into wall spaces,  
attics, crawl spaces or garages.  
NOTE - This warranty is invalid without an authorized agent’s receipt  
or if unit is damaged due to misuse, poor installation,  
improper use, mistreatment, negligence or any other  
circumstances beyond the control of KOBE RANGE HOODS  
authorized agents.  
Any repair carried out without the  
supervision of KOBE RANGE HOODS authorized agents will  
automatically void the warranty.  
-
KOBE RANGE HOODS will not be held responsible for any  
damages to personal property or real estate or any bodily  
injuries whether caused directly or indirectly by the range  
hood.  
WARNING:  
TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A  
RANGE TOP GREASE FIRE:  
-
Keep all fan, baffle/spacer/filter/oil tunnel/oil container and grease-laden surfaces clean.  
Grease should not be allowed to accumulate on fan, baffle/spacer/filter/oil tunnel/oil  
container.  
-
-
-
-
-
-
Always turn hood ON when cooking at high heat.  
Use high settings on cooking range ONLY when necessary.  
Do not leave cooking range unattended when cooking.  
Always use cookware and utensils appropriate for the type and amount of food prepared.  
Use this unit only in the manner intended by the manufacturer.  
Before servicing, switch power off at service panel and lock service panel (if possible) to  
prevent power from switching on accidentally.  
-
Clean ventilating fan frequently.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to Do In The Event Of a Range Top Grease Fire  
• SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, and then turn off the  
burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If  
the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE  
DEPARTMENT or 911.  
• NEVER PICK UP A BURNING PAN – You May Get Burned.  
• DO NOT USE WATER, including wet dishcloths or towels – a violent steam blast will result.  
• Use an extinguisher ONLY if:  
a) You have a Class A, B, C extinguisher and know how to operate it.  
b) The fire is small and contained in the area where it started.  
c) The fire department has been called.  
d) You can fight the fire with your back to an exit.  
What to Do If You Smell Gas  
Extinguish any open flame.  
Do not try to turn on the lights or any type of appliance.  
Open all doors and windows to disperse the gas. If you still smell gas, call the Gas  
Company and Fire Department right away.  
CAUTION  
1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials  
and vapors.  
2) To reduce the risk of fire, use only metal ductwork. Sufficient air is needed for proper  
combustion and exhausting of gases through the flue (chimney) to prevent back drafting.  
3) Follow the heating equipment manufacturer’s guideline and safety standards such as those  
published by the National Fire Protection Association (NFPA), and the American Society for  
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.  
4) Activating any switch on may cause ignition or an explosion.  
5) Due to the size and weight of this hood, two people installation is recommended.  
ELECTRICAL SHOCK HAZARD – Can result in serious injury or death.  
Disconnect appliance from electric power before servicing.  
If  
equipped, the fluorescent light bulb contains small amounts of  
mercury, which must be recycled or disposed of according to Local,  
State, and Federal Codes.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
COMPONENTS OF PACKAGE  
(Must keep all material for returns or refunds)  
RANGE HOOD BOX  
KOBE Range Hood – 1  
Warranty Registration Card –1  
Instructions Manual – 1  
Baffle Filter  
- 2 (30”, 36”, 42”)  
- 3 (48”)  
Stainless Steel Spacer  
- 0 (30”)  
- 1 (36”)  
- 2 (42”, 48”)  
Oil Tunnel – 1  
3/16" X 3/8" (8 pc)  
Ducting Transition – 1  
Screw Package for Transition – 1  
Hood-Mounting Bracket-2  
Screw Package for Hood-Mounting Bracket –1  
DUCT COVER KIT (Sold Separately)  
Option Of:  
Model No. CH0030DC-12 for 30” hood  
KOBE Duct Cover – 1  
Screw Package for Duct Cover - 1  
Model No. CH0036DC-12 for 36” hood  
KOBE Duct Cover – 1  
Screw Package for Duct Cover - 1  
Model No. CH0042DC-12 for 42” hood  
KOBE Duct Cover – 1  
Screw Package for Duct Cover - 1  
Model No. CH0048DC-12 for 48” hood  
KOBE Duct Cover – 1  
Screw Package for Duct Cover - 1  
3/16" X 3/8" (8 pc)  
OPTIONAL RECIRCULATING KIT ALSO AVAILABLE.  
FOR MORE INFORMATION, PLEASE VISIT OUR WEBSITE  
WWW.KOBERANGEHOODS.COM OR CONTACT KOBE RANGE HOODS AT (626) 350-1355.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
PLEASE READ ENTIRE INSTRUCTION BEFORE PROCEEDING  
Calculation before Installation  
To calculate installation, please refer to Table 1. (All calculation in inches.)  
- FOR UNDER THE CABINET -  
TABLE 1  
A = Height of Floor to Ceiling  
B = Height of Floor to Counter Top  
(Standard: 36”)  
C = Preferred Height of Counter Top to Hood  
Bottom (Recommended 27” to 30”)  
[(A – B) – (D + E)]  
D = Height of Hood  
E = Height of the Cabinet  
- FOR STAND ALONE (WITH OPTIONAL DUCT COVER) -  
TABLE 2  
A = Height of Floor to Ceiling  
B = Height of Floor to Counter Top  
(Standard: 36”)  
C = Preferred Height of Counter Top to Hood  
Bottom (Recommended 27” to 30”)  
[(A – B) – (D + E)]  
D = Height of Hood  
E = Height of the Cabinet  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY WARNING  
HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF IT IS  
NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.  
NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE  
HOOD MAY OCCUR.  
Installation Table of Contents  
UNDER THE CABINET INSTALLATION................................................................................6  
Preparation Before Installation................................................................................................6  
Hood Installation ........................................................................................................................6  
Ductwork Installation.................................................................................................................7  
Wiring to Power Supply.............................................................................................................7  
Final Assembly ...........................................................................................................................7  
STAND ALONE INSTALLATION ...........................................................................................9  
Preparation Before Installation................................................................................................9  
Hood Preparation Before Installation.....................................................................................9  
Hood Installation ........................................................................................................................9  
Wiring to Power Supply...........................................................................................................10  
Duct Cover Installation............................................................................................................11  
Final Assembly .........................................................................................................................11  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNDER THE CABINET INSTALLATION  
Preparation Before Installation  
NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT  
DEBRIS FROM ENTERING THE VENT  
OPENING.  
Decide the location of the venting pipe from the hood to  
the outside. Refer to Figure 1.  
A straight, short vent run will allow the hood to  
perform more efficiently.  
Try to avoid as many transitions, elbows, and long runs  
as possible. This may reduce the performance of the  
hood.  
Figure 1  
Temporarily wire the hood to test for proper  
operation before installing.  
NOTE: Peel protective film off the hood and parts (if  
any).  
To install hood under a cabinet with recessed  
bottom, attach 4-inch wide wood filler strips (not  
included) on each side. Refer to Figure 2.  
Using references in Table 1 and Measurements and  
Diagrams on pages 17-18, create access opening for  
electrical wires and ducting transition under the  
cabinet.  
Figure 2  
Hood Installation  
CAUTION: If moving the cooking range is necessary  
to install the hood, turn off the power in an electric  
range at the main electrical box. SHUT OFF THE GAS  
BEFORE MOVING A GAS RANGE.  
1. Puncture the knockout holes (for mounting under the  
cabinet) on the hood as shown in Figure 3.  
2. Attach ducting transition to hood exhaust with ten  
(3/16” x 3/8”) screws (provided). Shown in Figure 4.  
Figure 3  
3. Draw electrical wires through cabinet access opening.  
4. Center the hood beneath the cabinet and flush with the  
front of the cabinet.  
5. From the bottom of the hood, place mounting screw  
(not provided) through each knockout hole and secure  
to cabinet bottom. Once all mounting screws are in  
place, finish tightening screws until secure. CAUTION:  
MAKE SURE HOOD IS SECURE BEFORE  
RELEASING.  
Figure 4  
6. For safety purpose, extra knockout holes on the back of  
the hood are provided for a more secure installation.  
Knock out as many holes as needed and secure with  
screws (not provided) from the inside of hood.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ductwork Installation  
7. Use 8” aluminum or steel pipe (follow building codes in  
your area) to connect the ducting transition on the hood  
to the ductwork above. Use duct tape to seal and  
secure joints as shown in Figure 5.  
Wiring to Power Supply  
S AFE TY W ARNING  
TO PREVENT THE RISK OF ELECTRICAL SHOCK OR  
INJURY, ALL RANGE HOODS SHOULD BE PROPERLY  
Figure 5  
GROUNDED AND INSTALLED BY  
A
TRAINED  
PROFESSIONAL WHO IS KNOWLEDGEABLE ABOUT  
APPLICABLE NATIONAL AND LOCAL ELECTRICAL  
CODES.  
BEFORE CONNECTING WIRES, SWITCH POWER OFF  
AT SERVICE PANEL TO PREVENT POWER FROM  
BEING SWITCHED ON ACCIDENTALLY.  
8. Connect electrical wires.  
-
Connect three wires (black, white and green) to  
house wires and cap with wire connectors.  
Connect wires according to their colors (i.e. black to  
black, white to white, and green to green). See  
Figure 6.  
Figure 6  
-
Prevent wires from slipping between motor and any  
moving parts by securing in electrical box.  
Final Assembly  
CAUTION: Install heating lamps last.  
9. Drop Oil Tunnel into support structure. Refer to  
Figure 7.  
Figure 7  
10. Angle baffle filter toward back of hood  
Figure 8.  
. Refer to  
11. Push baffle filter up until almost level  
.
12. Slide forward into recess at front of hood.  
13. Lower baffle filter  
resting position  
and slide back until it fits into  
.
14. Repeat for all baffle filters and spacers. Refer to  
Measurements and Diagrams on page 21 for baffle  
filter and stainless spacer arrangement.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
15. Install heating lamps (not provided), 120 Volts 175  
Watts max. each.  
16. Turn power ON in control panel. Check all lights and  
fan operation.  
17. Make sure to leave this manual for the homeowner  
Figure 8  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
STAND ALONE INSTALLATION  
***Follow these installations only if installing with an optional duct cover:  
Preparation Before Installation  
NOTE: TO AVOID DAMAGE TO YOUR HOOD,  
PREVENT DEBRIS FROM ENTERING THE  
VENT OPENING.  
Decide the location of the venting pipe from the  
hood to the outside. Refer to Figure 9.  
A straight, short vent run will allow the hood to  
perform more efficiently.  
Try to avoid as many transitions, elbows, and long  
run as possible. This may reduce the performance  
of the hood.  
Figure 9  
Use duct tape to seal the joints between pipe  
sections.  
If necessary, prepare back wall frame with cross  
framing lumber for secure installation.  
Using references in Table 2 and Measurements  
and Diagrams on pages 19-20, decide the level of  
the lumber. Refer to Figure 10.  
Hood Preparation Before Installation  
Figure 10  
Temporarily wire the hood to test for proper  
operation before installing.  
Important: Peel protective film off the hood  
and the duct cover (if any).  
Attach ducting transition to hood exhaust with ten  
(3/16” x 3/8”) screws (provided). Refer to Figure  
11.  
Use eight (3/16” x 3/8”) screws (provided) to  
attach the two hood-mounting brackets (provided)  
to the back of the hood. Refer to Figure 12.  
Figure 11  
Hood Installation  
CAUTION: If moving the cooking range is  
necessary to install the hood, turn off the power in  
an electric range at the main electrical box. SHUT  
OFF THE GAS BEFORE MOVING A GAS RANGE.  
1. Using references in Table 2 and Measurements  
and Diagrams on pages 19-20, mark the leveling  
point of the hood. Position two mounting screws  
(not provided) on the wall, leaving 1/8” away from  
the wall. Refer to Figure 13  
Figure 12  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Align hood-mounting bracket to the two screws  
on the wall and hook hood into place. Tighten  
screws to secure hood to the wall.  
WALL  
3. For safety purpose, extra knockout holes on the  
back of the hood are provided for a more secure  
installation. Knock out as many holes as needed  
and secure with screws (not provided) from the  
inside of hood.  
CAUTION: MAKE SURE HOOD IS SECURE  
BEFORE RELEASING.  
Figure 13  
Wiring to Power Supply  
SAFETY WARNING  
TO PREVENT THE RISK OF ELECTRICAL SHOCK  
OR INJURY, THIS RANGE HOOD SHOULD BE  
PROPERLY GROUNDED AND INSTALLED BY A  
TRAINED  
PROFESSIONAL  
WHO  
IS  
KNOWLEDGEABLE  
ABOUT  
APPLICABLE  
NATIONAL AND LOCAL ELECTRICAL CODES.  
BEFORE CONNECTING WIRES, SWITCH POWER  
OFF AT SERVICE PANEL TO PREVENT POWER  
FROM BEING SWITCHED ON ACCIDENTALLY.  
Figure 14  
4. Connect the electrical wires.  
-
Connect three wires (black, white and green)  
to house wires and cap with wire connectors.  
Connect according to color: black to black,  
white to white, and green to green as shown  
in Figure 14.  
-
Prevent wires from slipping between motor  
and any moving parts by securing in  
electrical box.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Duct Cover Installation  
5. Use 8” aluminum or steel pipe (follow building  
codes in your area) to connect the ducting  
transition on the hood to the ductwork above.  
Use duct tape to seal and secure joints as shown  
in Figure 15. Slide the duct cover onto the hood.  
6. Use 3/16” x 3/8” screws (provided) to attach duct  
cover to hood.  
Figure 15  
Final Assembly  
CAUTION: Install heating lamps last.  
7. Drop Oil Tunnel into support structure. Refer to  
Figure 7.  
8. Angle baffle filter toward back of hood  
to Figure 8.  
. Refer  
9. Push baffle filter up until almost level  
.
10. Slide forward into recess at front of hood  
.  
Figure 16  
11. Lower baffle filter  
resting position  
and slide back until it fits into  
.
12. Repeat for all baffle filters and spacers. Refer to  
Measurements and Diagrams on page 21 for  
baffle filter and stainless spacer arrangement.  
13. Install heating lamps (not provided), 120 Volts  
175 Watts max. each.  
14. Turn power ON in control panel. Check all  
lights and fan operation.  
15. Make sure to leave this manual for the  
homeowner.  
Figure 17  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
This KOBE hood is equipped with touch-sensor screen and features 3 minute delay shutoff,  
powerful centrifugal squirrel cage with baffle filters, bright 12-volt 20-watt halogen lights and  
heating lamp capability (heating lamps not included).  
The touch-sensor screen has Heat Lamp Control, Light Control, Speed Control  
(QuietMode™, Low, Medium and High), and Power Control. Refer to Figure 18.  
Heat Lamp  
Light Control  
Speed Control  
Power Control  
Figure 18  
Power Control  
Once power is supplied to the KOBE hood, the  
long as power is supplied to the hood.  
sign will light up and remain lit as  
To activate, gently touch the  
symbol under the Power Control  
sign. The  
remaining control  
function choice.  
signs will light up and is ready for  
You can turn hood off immediately or after a 3 minute delay.  
Turn Off Immediately  
Gently tap the  
symbol under the Power Control  
sign lit.  
sign twice, the range hood  
will turn off immediately leaving only the  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turn Off After 3 Minute Delay  
Gently touch the  
symbol under the Power Control  
sign once,  
the  
the  
symbol flashes and after 3 minutes, the hood will turn off leaving only  
sign lit.  
Speed Control:  
There are four speeds: QuietMode™, Low, Medium, and High. To activate the speed, touch  
the control under the speed sign. For example, if turning on hood at low speed, gently touch  
the  
the  
symbol under the  
symbol under the  
sign. If you want to switch from low to high speed, touch  
sign and the hood change to high speed. To turn off only  
speed control (if, for example, halogen lights are also on), touch the  
the sign.  
symbol under  
Light Control  
Gently touch the  
symbol under the  
sign once to turn on the light. Touch  
the  
symbol again to dim the lights. Touch the  
symbol a third time will turn off  
the halogen lights.  
Heating Lamp Control  
Gently touch the  
Touching the  
symbol under the  
symbol under the  
sign once to turn on the heat lamps.  
sign again will turn off heat lamps.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
SAFETY WARNING  
NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS  
OPERATING.  
For optimal operation, clean range hood and all baffle/spacer/filter/oil tunnel/oil container  
regularly.  
To Clean Hood Surface  
CAUTION:  
NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.  
*** Regular care will help preserve the appearance of the hood.  
1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth.  
2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the  
surface of the hood. Avoid getting cleaning solution onto or into the control panel.  
Follow directions of the stainless steel cleaner. Caution: Do not leave on too long as  
this may cause damage to hood finish. Use soft towel to wipe off the cleaning  
solution, gently rub off any stubborn spots. Use dry soft towel to dry the hood.  
3. DO NOT allow deposits to accumulate or remain on the hood.  
4. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the  
surface and cause rusting.  
5. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain  
in contact with stainless steel for extended periods. Many of these compounds contain  
chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a  
clean cloth.  
To Clean Baffle, Spacer, Filter, Oil Tunnel and Oil Container  
CAUTION:  
DRAIN OIL FROM BAFFLES, SPACER(S), FILTERS, OIL TUNNEL(S)  
AND OIL CONTAINERS BEFORE OIL AND RESIDUE CAN OVERFLOW.  
1. Remove all baffles, spacer(s), filters, oil tunnel(s), and oil containers. Follow directions  
for installation in reverse.  
2. Discard oil and residue.  
3. Wash with warm soapy water. Dry thoroughly before replacing.  
(Note: Stainless Steel Baffles, Spacer(s) & Oil Tunnel are top rack dishwasher safe.)  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Replace Light Bulb  
CAUTION:  
HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.  
1. Make sure all controls are off, and range hood is unplugged.  
2. Place a flat-head screwdriver between light cover and housing to remove cover .  
3. Gently pull defective bulb straight out and discard. Light bulbs should be 12V 20W  
maximum.  
4. Wear a cotton glove or use a cloth to handle the replacement bulb (do not handle with  
bare fingers as this may shorten the life of the bulb). Push gently but securely into light  
socket. NOTE: DO NOT PUSH TOO HARD AS BULB “LEGS” MAY BREAK OFF.  
5. Replace light cover .  
6. Turn range hood ON to test for operation.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
MODEL / SIZE  
CH0130SQB / 30”  
CH0136SQB / 36”  
CH0142SQB / 42”  
CH0148SQB / 48”  
DESIGN  
18-Gauge Seamless Commercial Stainless Steel  
CONSUMPTION / AMPERE  
702W / 5.85A – 30”, 36”  
722W / 6.02A – 42”, 48”  
VOLTAGE  
120V 60Hz  
NUMBER OF MOTORS  
FAN TYPE: CENTRIFUGAL  
EXHAUST  
1
Squirrel Cage  
Top Transition Rectangular to 8” Round x 1  
Touch Sensor Screen  
CONTROLS  
HALOGEN LIGHTS  
30” / 36” - 12V20W x 2  
42” / 48” - 12V20W x 3  
HEATING LAMPS  
120V 175W Max. x 2 (Light Bulbs Not Included)  
(CH0130SQB) 29-3/4” x 24” x 18”  
(CH0136SQB) 35-3/4” x 24” x 18”  
(CH0142SQB) 41-3/4” x 24” x 18”  
(CH0148SQB) 47-3/4” x 24” x 18”  
Original Kit ---Duct Cover  
HOOD DIMENSION  
(W X D X H)  
OPTIONAL ACCESSORIES  
(W X D X H)  
(CH0030DC-12) - 30” x 12” x 12”  
(CH0036DC-12) - 36” x 12” x 12”  
(CH0042DC-12) - 42” x 12” x 12”  
(CH0048DC-12) - 48” x 12” x 12”  
HOOD WEIGHT (lbs)  
Net  
70  
75  
84  
92  
Gross  
84  
(CH0130SQB)  
(CH0136SQB)  
(CH0142SQB)  
(CH0148SQB)  
QuietMode™  
400  
93  
104  
115  
Blower Air Capacity (cfm)*  
Low  
600  
3.5  
Medium  
800  
High  
1000  
8.0  
Sone**  
1.4  
7.0  
*In House Test. HVI Standard.  
**Specifications subject to change without notice.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEASUREMENTS & DIAGRAMS  
*** Inch measurements converted from millimeter. Inch measurements are estimated.  
- FOR UNDER THE CABINET -  
MODEL NO: CH0130SQB  
CH0136SQB  
CH0142SQB  
CH0148SQB  
1
-
7
/
8
"
(
4
8
)
8
"
(
1
2
/
2
0
"
(
3
1
2
)
)
2
)
-
1
-
2
1
1
3
(
/
/
4
8
"
"
"
(
3
4
(
2
/
)
5
4
1
)
-
1
)
6
0
3
(
"
2
1
)
2
3
(
"
4
/
1
1
-
2
1
"
(
3
0
5
)
)
2
3
(
"
4
/
1
-
1
"
8
4
/
"
2
4
/
"
6
3
/
2
"
4
0
"
3
(
6
1
0
)
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- FOR UNDER THE CABINET – (Cont.)  
)
5
6
1
(
"
2
/
1
-
6
1
2
"
(
3
0
5
)
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- FOR STAND ALONE (WITH OPTIONAL DUCT COVER) –  
MODEL NO: CH0130SQB  
CH0136SQB  
CH0142SQB  
CH0148SQB  
1
-
7
-
/
8
)
"
5
(
.
4
0
8
9
)
1
(
"
8
2
/
"
1
(
2
-
0
7
3
)
2
-
1
)
-
1
2
1
/
/
3
(
4
"
8
"
(
3
"
(
2
4
5
)
/
4
1
)
1
)
5
.
2
5
1
(
"
6
)
6
0
3
)
(
0
"
7
2
(
1
"
4
/
3
-
2
)
2
3
(
"
4
/
1
1
-
2
"
1
(
3
0
)
5
2
)
3
(
"
4
/
1
-
1
"
8
4
/
"
2
4
/
"
6
3
/
"
2
0
4
3
"
(
6
1
0
)
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- FOR STAND ALONE (WITH OPTIONAL DUCT COVER) – (Cont.)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hood-Mounting Bracket  
1" (25.4)  
1/4" (6.5)  
6" (152)  
7 - 1/2" (190.5)  
BAFFLE FILTER & STAINLESS STEEL SPACERS  
30"HOOD  
42"HOOD  
36"HOOD  
48"HOOD  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
MODEL NO:  
CH0130SQB  
CH0136SQB  
CH0142SQB  
CH0148SQB  
BODY COMPONENTS  
NO.  
1
DESCRIPTION  
Hood Casing  
MODEL/SIZE  
PART NO.  
CH101-1  
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
17  
A
Ducting Transition  
Screws (3/16” x 3/8”)  
Blower Assembly  
Field Wiring Box Cover  
Field Wiring Box  
Heat Lamp Socket  
Screws (3/16” x 3/8”)  
Heat Lamp Socket Box  
Oil Tunnel  
Heat Lamp Support  
Halogen Light Support  
Halogen Light  
Screws (3/16” x 3/8”)  
Gasket  
CH101-2  
CH101-3  
CH101-4  
CH101-5  
CH101-6  
CH101-7  
CH101-8  
CH101-9  
CH101-10  
CH101-11  
CH101-12  
CH101-13  
CH101-14  
CH101-15  
CH101-16  
Baffle Filter  
Stainless Steel Spacer  
CH0136SQB/CH0142SQB CH101-17-1  
B
CH0148SQB  
CH101-17-2  
CH101-18  
CH101-19  
CH101-20  
CH101-21  
CH101-14  
CH101-23  
18  
19  
20  
21  
22  
23  
Baffle Handle  
Screws (3/16” x 3/8”)  
Switch Assembly  
Electrical Assembly  
Screws (3/16” x 3/8”)  
Hood-Mounting Bracket  
Optional Duct Cover  
ORIGINAL KIT  
NO.  
24  
DESCRIPTION  
Duct Cover  
MODEL/SIZE  
CH0030DC-12  
CH0036DC-12  
CH0042DC-12  
CH0048DC-12  
PART NO.  
B102-6012-030  
B102-6012-036  
B102-6012-042  
B102-6012-048  
CH101-3  
3
Screws (3/16” x 3/8”)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
2
1
4
5
23  
18  
22  
6
7
21  
9
3
20  
8
16  
19  
10  
11  
15  
14  
12  
17A  
17B  
13  
17  
Optional Duct Cover (Sold Separately)  
24  
3
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blower Assembly  
NO.  
4.1  
4.2  
4.3  
4.4  
4.5  
4.6  
4.7  
4.8  
DESCRIPTION  
Screws (3/16” x 3/8”)  
Air Flow Grill  
Left Locknut  
Left Squirrel Cage  
Motor  
Right Squirrel Cage  
Right Locknut  
Air Chamber  
MODEL / SIZE  
PART NO.  
CH101-4.1  
CH101-4.2  
CH101-4.3  
CH101-4.4  
CH101-4.5  
CH101-4.6  
CH101-4.7  
CH101-4.8  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical Assembly  
NO.  
21.1  
21.2  
21.3  
21.4  
21.5  
21.6  
21.7  
21.8  
21.9  
21.10  
21.11  
21.12  
21.13  
DESCRIPTION  
Bolt  
Electrical Box  
Screws (3/16” x 3/8”)  
Power Board  
Electrical Box Cover  
Setup Board  
Screws (3/16” x 3/8”)  
Capacitor  
Transformer  
Bolt Gasket  
Screw Cap  
Rubber Gasket  
Screws (3/16” x 3/8”)  
MODEL / SIZE  
PART NO.  
CH101-21.1  
CH101-21.2  
CH101-21.3  
CH101-21.4  
CH101-21.5  
CH101-21.6  
CH101-21.7  
CH101-21.8  
CH101-21.9  
CH101-21.10  
CH101-21.11  
CH101-21.12  
CH101-21.13  
21.1  
21.2  
21.11  
21.10  
21.12  
21.13  
21.3  
21.9  
21.4  
21.5  
21.8  
21.6  
21.7  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switch Assembly  
NO.  
20.1  
20.2  
20.3  
20.4  
20.5  
20.6  
DESCRIPTION  
Screen Support  
Touch Screen  
Switch Box  
Switch Board  
Switch Box Cover  
Screws (1/8” x 1/2”)  
MODEL / SIZE  
PART NO.  
CH101-20.1  
CH101-20.2  
CH101-20.3  
CH101-20.4  
CH101-20.5  
CH101-20.6  
20.1  
20.6  
20.2  
20.3  
20.4  
20.5  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CIRCUIT DIAGRAM  
MODEL NO.: CH0130SQB  
CH0136SQB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL NO.: CH0142SQB  
CH0148SQB  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISCLAIMER  
1. CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING  
DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS  
RECEIPT. REQUEST NAME AND SIGNATURE OF THE CARRIER’S AGENT AND  
KEEP COPY TO SUPPORT YOUR CLAIM.  
Upon acceptance of items, owner assumes responsibility for its safe arrival. Damages  
should be reported to carrier and a claim filed. Failure to do this could result in the  
carrier refusing to honor your claim. The carrier will furnish you with necessary forms  
for filing a claim.  
DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR  
WARRANTY.  
2. PLEASE INSPECT CONTENTS OF PACKAGE (S) CAREFULLY UPON RECEIVING!  
We must be notified in writing of any damages and/or missing parts within the allocated  
days upon receipt of package(s). Contact your local KOBE dealer or distributor or call  
KOBE for the time limit.  
CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.  
NOTE: ITEMS WERE THOROUGHLY TESTED AND CAREFULLY PACKED IN OUR  
FACTORY.  
3. Products must be returned in good working condition with ALL original parts and  
documentation packed in ALL original cartons, fillers and shipping cartons. A restocking  
fee of 25% will be charged for all approved return(s).  
EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS  
MISSING.  
4. MAKE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE  
INSTALLATION. Appearance flaws of the hood found after installation and not  
affecting hood performance is not covered under our warranty for returns or  
exchanges. Service visits not covered under warranty will carry a service charge.  
A) Before Installation: Return for exchange or refund (please see above for  
acceptable returns).  
B) After Installation: NO exchange or refund.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY  
WARRANTY CERTIFICATE  
KOBE Range Hoods, Inc. warrants all products manufactured or supplied by it to be free from  
defects in workmanship and materials. Its obligations pursuant to this warranty are limited to a  
period of two years from the date of purchase and to the repair or replacement at its option and  
subject to the terms and conditions stated below, of any component part, which its examination  
shall disclose to be so defective.  
TWO-YEAR WARRANTY SERVICE PERIOD  
Any covered failure occurring within two years of original purchase arising from defective  
workmanship or material in manufacture will be repaired (or at our option the unit will be  
replaced) free of charge by an authorized KOBE Range Hoods Agent or KOBE Range Hoods  
as applicable. Keep proof of purchase (or original invoice) handy for inspection.  
If the range hood is sold by the original purchaser during the warranty period the new owner is  
protected until expiration of the original purchaser’s warranty.  
CONDITIONS  
The following conditions apply only in relation to the warranty expressly given in this certificate.  
1) This warranty applies only:  
a) within U.S.A. and Canada.  
b) to range hoods used for PRIVATE SINGLE FAMILY USE (if used for  
COMMERCIAL or MULTIPLE FAMILY USE or other purposes, warranty will be  
voided).  
2) Repair of any fault to be provided under this warranty shall not be provided:  
a) if the identification number attached to the range hood has been altered,  
rendered illegible or removed;  
b) if notice of the defect has not been given within the period applicable;  
c) for failure of light bulbs;  
d) for physical damage;  
e) for surfaces damaged by use of improper chemical cleaning agents;  
f) if the appliance has been:  
i) subject to misuse, abuse, negligence, accident, incorrect installation or failure  
to follow the operating instructions;  
ii) connected to improper, inadequate or faulty electricity service or exhaust ducts  
or flues or operated using incorrect or contaminated lubricants;  
iii) installed, maintained or operated otherwise than in accordance with the  
instructions furnished by KOBE Range Hoods including the improper use of  
detergents, bleaches, or cleaners.  
g) for damage to range hood during transit, delivery, installation or removal;  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
h) for damage by or resulting from attempted repairs conducted by anyone other than  
our Authorized Service Agent.  
3) The purchaser shall be responsible for any expenses involved in making the range  
hood readily accessible for servicing and where the range hood is installed outside the  
main sales territory of the retailer or service territory of the nearest approved KOBE  
Range Hoods Agent as applicable, for any traveling expenses and any costs of  
transporting the range hood or parts thereof to and from the dealer or Service Agent  
4) The purchaser must produce proof of purchase together with this warranty certificate  
when making the claim.  
5) Damages caused during shipment are not covered under our warranty.  
CONSEQUENTIAL DAMAGE  
The warrantor is not responsible for any consequential damage. SOME STATES DO NOT  
ALLOW THE EXCLUSION OF CONSEQUENTIAL DAMAGE SO THE ABOVE EXCLUSION  
MAY NOT APPLY TO YOU.  
IMPLIED WARRANTIES/STATE LAW  
Any implied warranties, including the implied warranty of merchantability and fitness for  
purpose, imposed on the sale by the laws of the state of sale are limited to two year from the  
date of original purchase. Some states do not allow limitations on the duration of implied  
warranties. This warranty gives you specific legal rights, and may also have rights, which vary  
from state to state.  
SERVICE  
For service contact:  
KOBE Range Hoods  
10505 Valley Blvd. Suite 302  
EI Monte, CA 91731  
U.S.A  
Tel: (626) 350-1355 Fax: (626) 350-1976  
Email:  
Website:  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT REGISTRATION  
Register Your Product!  
Any covered failure occurring within two years of original purchase arising from defective  
workmanship or material in manufacture will be repaired or at our option the unit will be  
replaced free of charge by an authorized KOBE Range Hoods Agent or KOBE Range  
Hoods as applicable. Keep proof of purchase (original invoice) handy for inspection.  
If the range hood is sold by the original purchaser during the warranty period the new  
owner is protected until expiration of the original purchaser’s warranty. See warranty  
section for complete warranty coverage information.  
This appliance has been manufactured, tested, and inspected to the standards required by  
KOBE Range Hoods.  
PLEASE MAIL IN YOUR WARRANTY REGISTRATION CARD AND PROOF OF  
PURCHASE TO:  
KOBE Range Hoods  
10505 Valley Blvd, Suite 302  
EI Monte, CA 91731  
RECORD THE FOLLOWING INFORMATION FOR YOUR RECORD:  
Model No._______________________________________________  
Serial No. _______________________________________________  
Purchased Date  
Purchased From:  
_____/ ______/  
___________________________  
___________________________  
___________________________  
IMPORTANT: PLEASE KEEP A COPY OF YOUR SALE RECEIPT OR INVOICE HANDY  
WHEN REQUESTING SERVICE.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KOBE Range Hoods  
10505 Valley Blvd Suite # 302  
El Monte, CA 91731 USA  
This KOBE hood is made for use in the USA and CANADA only. We do not  
recommend using this hood overseas as the power supply may not be  
compatible and may violate the electrical code of that country. Using a KOBE  
hood overseas is at your own risk and will void your warranty.  
 
 
 
 
 
 
 
V.070530  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia TV Mount NS TVMFP12 User Manual
IOGear Network Cables Q1280 User Manual
Jenn Air Dishwasher JDB1250AWP User Manual
John Deere Radio OMPFP12436 User Manual
JVC Camcorder Accessories WR DVXU User Manual
JVC VCR HR A56U User Manual
Kambrook Electric Heater KPH200 User Manual
Kenko SONAR KFM 2100 User Manual
Kenwood Car Amplifier TM V71a User Manual
Kenwood Car Video System KCA R42FM User Manual