®
36" (76.2 cm) Range Hood
PRODUCT MODEL NUMBERS
PRODUCT DIMENSIONS
KWCU405S
KWCU465S
Vented installations
10¹⁄₄" (26.0 cm)
Electrical: 120-volt, 60-Hz, AC-only, 15-amp,
fused electrical curcuit is required. Use copper
wire only.
11¹³⁄₁₆" (30.0 cm)
Min 27¹⁄₂" (69.8 cm)
Max 36¹⁄₂" (92.7 cm)
21¹⁄₄" (54.0 cm)
VENTING REQUIREMENTS
1¹⁄₄"
Note: Flexible vent is not recommended. Flexible vent
creates back pressure and air turbulence that greatly
reduce performance.
(3.2 cm)
3¹⁵⁄₁₆"
(10.0 cm)
Vent system can terminate either through the roof or
wall. To vent through a wall, a 90° elbow is needed.
22" (55.9 cm)
30" (76.2 cm)
36" (91.4 cm)
Non-vented (recirculating) installations
Roof Venting
Wall Venting
Non-vented
(recirculating)
10⁵⁄₈" (27.0 cm)
12" (30.5 cm)
A
Min 32" (81.3 cm)
Max 38¹⁄₈" (96.8 cm)
A
5"
B
B
(12.7 cm)
3¹⁄₂"
(8.9 cm)
B
22"
(55.9 cm)
A
12¹⁄₂"
(31.8 cm)
1¹⁄₄"
(3.2 cm)
3¹⁵⁄₁₆"
(10.0 cm)
22" (55.9 cm)
30" (76.2 cm)
36" (91.4 cm)
A. Roof cap
A. Wall cap
A. Deflector
B. 6" (15.2 cm)
round vent
B. 6" (15.2 cm)
round vent
B. 6" (15.2 cm)
round vent
INSTALLATION DIMENSIONS
To calculate the length of the system you need, add the
equivalent feet (meters) for each vent piece used in the
system.
30" (76.2 cm) or 36" (91.4 cm)
cabinet opening width
Note: The range hood chimneys are
adjustable and designed to meet varying
ceiling or soffit heights depending on the
distance “X” between the bottom of the
range hood and the cooking surface. For
higher ceilings, a 40" (101.6 cm) Chimney
Extension Kit Part Number 8212710
(Stainless Steel), 8212711 (White), or
8212712 (black) is available from your
dealer or an authorized parts distributor.
The chimney extension replaces the upper
chimney shipped with the range hood.
(if installed between cabinets)
Vent piece
6" (15.2 cm) round
45° elbow
2.5'
(0.8 m)
90° elbow
5.0'
See Note
(1.5 m)
X*
Important:
18" (45.7 cm) min.
clearance upper
cabinet to countertop
Minimum distance “X”: 24” (61.0 cm)
Suggested maximum distance “X”: 30”
(76.2 cm)
Maximum equivalent vent length is 35' (10.7 m).
Example Vent System
For vented installations, the chimneys can
be adjusted for ceilings between 7' 6-3/8"
(2.30 m) and 9' 0" (2.74 m).
Wall cap
6' (1.8 m)
90º elbow
36" (91.4 cm)
countertop height
For non-vented (recirculating) installations,
the chimneys can be adjusted for ceilings
between 8' 3-3/8" (2.45 m) and 9' 5-1/4"
(2.88 m).
Maximum length
=
35' (10.7 m)
2’
(0.6 m)
1 — 90° elbow
8' (2.4 m) straight
1 — wall cap
=
=
=
5' (1.5 m)
8' (2.4 m)
0' (0 m)
system length
=
13' (3.9 m)
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10140616
09-11-08
Download from Www.Somanuals.com. All Manuals Search And Download.
|