KitchenAid Indoor Furnishings KKFV01SP Series User Manual

KITCHEN FAUCETS  
Installation Instructions and Use & Care Guide  
For questions about features, operation/performance, parts, accessories, or service, call: 1-800-422-1230 or visit our website at...  
Model Series  
KKFV01LP  
Model Series  
KKFV01SP  
Model Series  
KKFV01PP  
READ AND SAVE THESE INSTRUCTIONS  
FOR RESIDENTIAL USE ONLY  
IMPORTANT:  
Installer: Leave installation instructions with the homeowner.  
Homeowner: Keep installation instructions for future reference.  
8559765B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Working from under the sink or countertop, reinstall the parts  
onto the threaded shank of the faucet in the following order:  
flat rubber washer, white triangular support, flat metal washer,  
and threaded collar.  
10. Move the faucet lever to the closed (forward) position and  
open supply valves. Check connections for leaks.  
11. Remove the aerator from the faucet and flush the hot and  
cold lines until water is clear.  
NOTE: The aerator is in the end of the faucet. To remove and  
replace aerator, see “Aerator Assembly” in the “Faucet Care”  
section.  
A
B
12. Reinstall the aerator into the faucet and tighten with a  
C
wrench.  
D
Model KKFV01LP  
1. Remove the threaded collar, flat metal washer, and flat rubber  
A. Flat rubber washer  
B. White triangular support  
C. Flat metal washer  
D. Threaded collar  
washer from faucet.  
NOTE: Do not remove the rubber O-ring from the bottom of  
the faucet base.  
4. Align the faucet and firmly hand-tighten the threaded collar to  
keep the faucet base from turning when moving the control  
lever. Make sure the control lever is pointed toward the right-  
hand side of the sink.  
A
B
C
5. Connect the sprayer hose to the water supply hose using the  
check valve assembly and the fiber washers. Make sure the  
check valve assembly is positioned so that the arrow is  
pointing down, away from the faucet and toward the sprayer  
head.  
D
6. Place a fiber washer between the sprayer hose and the check  
valve assembly and fasten them together. Then, place a fiber  
washer between the check valve assembly and the supply  
hose and fasten them together, as shown.  
A. Rubber O-ring  
B. Flat rubber washer  
C. Flat metal washer  
D. Threaded collar  
2. Feed tubing through the hole in the sink or counter top and  
then insert threaded shank into the hole. Make sure the  
rubber O-ring in the channel at the bottom of the faucet base  
is firmly in place.  
A
B
C
3. Working from under the sink or countertop, reinstall the parts  
onto the threaded shank of the faucet in the following order:  
flat rubber washer, white triangular support, flat metal washer,  
and threaded collar.  
D
E
A
B
A. Supply hose (from faucet)  
B. Fiber washer  
D. Fiber washer  
E. Sprayer hose  
C
C. Check valve assembly  
D
7. Connect the red-striped, braided hose to the hot water  
supply valve. Connect the blue-striped, braided hose to the  
cold water supply valve. Hold the hoses in place when  
tightening the nut to keep the hoses from twisting.  
A. Flat rubber washer  
B. White triangular support  
C. Flat metal washer  
D. Threaded collar  
8. Make sure the sprayer hose is fully inserted into the faucet  
body.  
4. Align the faucet and firmly hand-tighten the threaded collar to  
keep the faucet base from turning when moving the operating  
lever.  
9. Working from under the sink, use the screws provided to  
attach the weights onto the sprayer hose. Attach the weights  
to the sprayer head side of the hose loop, just above the  
bend in the hose, as shown.  
5. Connect the red-striped, braided hose to the hot water  
supply valve. Connect the blue-striped, braided hose to the  
cold water supply valve. Hold the hoses in place when  
tightening the nut to keep the hoses from twisting.  
NOTE: The weights are for counterbalance only, not for  
automatic retraction.  
6. Move the faucet lever to the closed (forward) position and  
open supply valves. Check connections for leaks.  
7. Remove the aerator from the faucet and flush the hot and  
cold lines until water is clear.  
A
C
NOTE: The aerator is in the end of the faucet. To remove and  
replace aerator, see “Aerator Assembly” in the “Faucet Care”  
section.  
B
8. Reinstall the aerator into the faucet and tighten with a  
A. Weights  
B. Sprayer hose  
C. Water flow direction  
wrench.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
FAUCET USE  
FAUCET CARE  
Operating the Faucet  
Faucet Exterior  
Clean the faucet using a clean cloth and warm water, or a very  
diluted solution of mild dish detergent in warm water. Dry and  
polish the faucet with a soft cloth.  
All Models  
Operate the faucet by moving the lever to the desired position.  
NOTE: Do not use abrasive sponges, or anti-lime or acidic  
cleansers such as scouring agents.  
A
B
Aerator Assembly  
D
C
Periodically, remove and clean the aerator under running water. If  
the aerator is very dirty, soak it in household vinegar overnight.  
Remove and Replace the Aerator  
Model KKFV01PP  
1. Turn off water supply to faucet.  
A. Full hot  
B. Full on  
C. Full cold  
D. Off  
2. Remove the aerator assembly (threaded collar, screen, and  
rubber washer). The spray button spring will also come out  
with the aerator assembly.  
Model KKFV01PP  
3. Clean or soak only the aerator screen.  
The flow of water can be a stream or spray. The default water  
setting is stream.  
4. Replace the spray button spring. Insert the small side into the  
spray head around the slotted screw.  
The spray assembly can be drawn out of the faucet  
approximately 19" (48.26 cm).  
5. Replace the aerator assembly, and fully tighten the threaded  
collar with a wrench.  
Water spray setting  
Push the diverter button on top of the spray assembly.  
Water stream setting  
Turn off the faucet and then turn it back on. The spray assembly  
automatically resets.  
A
B
A
A. Spray button  
B. Spray assembly  
B
C
Model KKFV01SP  
D
The flow of water can be a stream or spray. The default water  
setting is stream.  
A. Spray button spring  
B. Rubber washer  
C. Aerator screen  
D. Threaded collar  
The spray assembly can be drawn out of the faucet spout  
approximately 12" (30.48 cm).  
Water spray setting  
Push the large diverter button on top of the spray assembly.  
Water stream setting  
Push the small diverter button located below the larger button, or  
turn off the faucet and then turn it back on.  
A
B
A. Spray button  
B. Stream button  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model KKFV01LP  
1. Turn off water supply to faucet.  
Model KKFV01SP  
1. Turn off water supply to faucet.  
2. Remove the aerator assembly (threaded collar, screen, and  
2. Remove the aerator assembly (threaded collar, screen, and  
rubber washer).  
rubber washer).  
3. Clean or soak only the aerator screen.  
3. Clean or soak only the aerator screen.  
4. Replace the aerator assembly, and fully tighten the threaded  
4. Replace the aerator assembly, and fully tighten the threaded  
collar with a wrench.  
collar with a wrench.  
A
B
C
A. Rubber washer  
B. Aerator screen  
C. Threaded collar  
A
B
C
A. Rubber washer  
B. Aerator screen  
C. Threaded collar  
TROUBLESHOOTING  
Slow or no water flow  
Faucet leaks around the lever  
Is the faucet lever in the ON position? The lever control  
pattern is triangular with OFF toward the front of the faucet.  
See “Operating the Faucet.”  
Is the retaining nut that holds the cartridge in place  
loose? Remove the faucet lever, lever base assembly, and  
cap to expose the cartridge retaining nut. Tighten retaining  
nut.  
Are the water supply valves fully open? Turn the water  
valves ON.  
Faucet lever is loose  
Is the household main water supply turned OFF? Check  
for water flow from a different faucet.  
With the Allen wrench (supplied), tighten the setscrew in the lever.  
Make sure the setscrew is flush with the lever so it does not stick  
out.  
Are the braided faucet hoses twisted? Untwist the hoses  
and check for kinks.  
Is the aerator blocked? Make sure the aerator is free of  
debris that could plug the holes. See “Cleaning.”  
Pull out or down sprayer head does not pull out to a  
satisfactory distance or retract fully  
(Models KKFV01PP and KKFV01SP only)  
Does the faucet lever move normally? If the lever moves  
too freely or seems stuck, the cartridge may need to be  
replaced.  
Are articles under the sink interfering with the hose?  
Move the articles to provide clearance for the hose.  
Faucet leaks or drips at the spout  
Are the weights positioned correctly on the spray hose?  
The two weights should be spaced approximately 1" apart on  
the sprayer head side of the hose loop just above the bend.  
See “Install the Faucet.”  
It is normal for the faucet to drip up to 1 minute after turning off  
the water.  
Is the faucet lever in the OFF position? The lever control  
pattern is triangular with OFF toward the front of the faucet.  
See “Operating the Faucet.”  
Is the faucet lever in the OFF position but continues to  
leak from the spout? The cartridge and the cartridge seals  
should be inspected for wear and replaced if necessary.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
REPLACEMENT PARTS LISTS  
Model KKFV01LP  
Model KKFV01SP  
9
8
9
4
10  
11  
3
4
13  
2
12  
3
2
1
1
5
8
5
6
6
14  
15  
12  
7
7
19  
10  
16  
11  
17  
18  
20  
ITEM  
DESCRIPTION  
Lever base assembly  
Spring  
PART NUMBER  
ITEM  
DESCRIPTION  
Lever base assembly  
Spring  
PART NUMBER  
1
*
*
1
*
*
2
2
3
Lever - Stainless Steel  
Lever - Chrome  
Setscrew  
W10198637  
3
Lever - Stainless Steel  
Lever - Chrome  
Setscrew  
W10198637  
3
W10198638  
3
W10198638  
4
*
4
*
5
Cap  
*
5
Cap  
*
6
Retaining nut  
Cartridge  
*
6
Retaining nut  
Cartridge  
*
7
8211409  
7
8211401  
*
8
Spout assembly  
Aerator set  
*
8
Spout assembly  
Short plastic insert  
Screen washer  
Sprayer - Stainless steel  
Sprayer - Chrome  
Aerator set  
9
8211403  
9
8211417  
W10186588  
8211402  
8211416  
8211403  
*
10  
11  
12  
Base  
*
10  
11  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
Mounting assembly  
O-ring  
8211411  
*
* This part is not serviceable  
Screw  
O-ring  
*
Base  
*
Fiber washer  
Check valve assembly  
Weight  
8211404  
8211410  
8211407  
8211411  
8211405  
Mounting assembly  
Hose  
* This part is not serviceable  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model KKFV01PP  
ITEM  
DESCRIPTION  
Lever base assembly  
Spring  
PART NUMBER  
4
3
2
1
*
*
2
1
3
Lever - Stainless steel  
Lever - Chrome  
Setscrew  
W10198637  
3
W10198638  
5
6
4
*
21  
15  
5
Cap  
*
6
Retaining nut  
Cartridge  
*
7
14  
7
8211401  
*
13  
8
Body  
12  
8
9
9
O-ring  
*
10  
11  
12  
13  
14  
14  
15  
16  
17  
18  
19  
20  
21  
Base  
Teflon® ring  
*
*
Long plastic insert  
Rubber washer  
Sprayer - Stainless steel  
Sprayer - Chrome  
Aerator set  
8211418  
W10186587  
8211408  
8211415  
8211403  
8211410  
8211404  
8211405  
8211407  
8211411  
W10200280  
11  
10  
20  
Check valve assembly  
Fiber washer  
Hose  
17  
16  
Weight  
19  
Mounting assembly  
Spray button spring  
* This part is not serviceable  
18  
®Teflon is a registered trademark of E.I. Dupont de Nemours and  
Company.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
KITCHENAID® FAUCETS WARRANTY  
ONE YEAR LIMITED WARRANTY  
For one year from the date of purchase, when this faucet is installed, operated and maintained according to instructions attached to or  
furnished with the product, KitchenAid will replace the faucet with an equivalent faucet supplied by KitchenAid if this faucet is found to be  
defective in materials or workmanship under conditions of normal use. This warranty extends to the original purchaser only.  
SECOND THROUGH THIRD YEAR LIMITED WARRANTY ON STAINLESS STEEL FINISH  
(residential installations only)  
In the second through third year from the date of purchase, when this faucet is installed, operated and maintained according to instructions  
attached to or furnished with the product, KitchenAid will replace the faucet with an equivalent faucet supplied by KitchenAid if the stainless  
steel finish on this faucet is found to be defective in materials or workmanship under conditions of normal household use. This warranty  
extends to the original purchaser only.  
SECOND THROUGH FIFTH YEAR LIMITED WARRANTY ON CHROME FINISH  
(residential installations only)  
In the second through fifth year from the date of purchase, when this faucet is installed, operated and maintained according to instructions  
attached to or furnished with the product, KitchenAid will replace the faucet with an equivalent faucet supplied by KitchenAid if the chrome  
finish on this faucet is found to be defective in materials or workmanship under conditions of normal household use. This warranty extends  
to the original purchaser only.  
SECOND THROUGH TENTH YEAR LIMITED WARRANTY ON FAUCET CARTRIDGE  
(residential installations only)  
In the second through tenth year from the date of purchase, when this faucet is installed, operated and maintained according to instructions  
attached to or furnished with the product, KitchenAid will replace the faucet cartridge with a faucet cartridge supplied by KitchenAid if the  
faucet cartridge is found to be defective in materials or workmanship under conditions of normal household use. This warranty extends to the  
original purchaser only.  
ITEMS EXCLUDED FROM WARRANTY  
KitchenAid WILL NOT Pay for:  
1. Service calls to correct the installation of your faucet, to instruct you on how to use your faucet, or to repair or replace household  
plumbing.  
2. Limited warranty repairs after the first year when your faucet is used in other than normal, single-family household use.  
3. Damage resulting from accident, alteration, unauthorized modification, misuse, abuse (such as heavy impact), fire, floods, acts of God,  
improper installation or installation not in accordance with local plumbing codes, or use of products not approved by KitchenAid.  
4. Damages resulting from improper care or maintenance.  
5. Damages resulting from improper applications, such as exposure to corrosive chemicals, photographic solutions, etc.  
6. Any unauthorized modifications made to the product after it leaves KitchenAid (or its suppliers) premises whether performed by a  
contractor, service company, or you.  
7. Any labor costs during the limited warranty periods.  
8. Repair or replacement parts for units operated outside the United States.  
9. Transportation and labor costs associated with removal or reinstallation of covered parts.  
DISCLAIMER OF IMPLIED WARRANTIES  
IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces do not  
allow limitations on the duration of implied warranties of merchantability or fitness, so this limitation may not apply to you. This warranty gives  
you specific legal rights, and you also may have other rights that vary from state to state or province to province.  
KITCHENAID SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so this exclusion or limitation may not apply to  
you. This warranty gives you specific legal rights, and you also may have other rights which may vary from state to state.  
Outside the 50 United States, this warranty does not apply. Contact your authorized KitchenAid dealer to determine if another warranty  
applies.  
8/08  
If you believe you have a warranty claim, contact KitchenAid through your Dealer, Plumbing Contractor, Home Center or E-tailer. Or call our  
Customer eXperience Center at 1-800-422-1230 from anywhere in the U.S.A., or write:  
KitchenAid Brand Home Appliances  
Customer eXperience Center  
553 Benson Road  
Benton Harbor, MI 49022-2692  
Please include a daytime phone number in your correspondence.  
In the event of a warranty claim, the owner will be required to provide proof of purchase, model and serial number, finish, a copy of the  
original invoice showing the seller and date the product was purchsed, and a complete description of the problem. KitchenAid reserves the  
right to inspect any faucet reported to be defective prior to replacement of the faucet. All decisions are final.  
Keep this book and your sales slip together for future  
Dealer name____________________________________________________  
reference. You must provide proof of purchase or installation  
date for in-warranty service.  
Address________________________________________________________  
Phone number__________________________________________________  
Model number __________________________________________________  
Serial number __________________________________________________  
Purchase date __________________________________________________  
Write down the following information about your faucet to better  
help you obtain assistance if you ever need it. You will need to  
know your complete model number and serial number.  
8559765B  
9/08  
Printed in U.S.A.  
© 2008. All rights reserved.  
® Registered Trademark/TM Trademark of KitchenAid, U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Jwin CD Player JX CD680 User Manual
Kalorik Blender USK BL 3 4 5 User Manual
Kambrook Blender KSB7 User Manual
Kenmore Dehumidifier 5805245 User Manual
Kenwood CD Player KDC X915 KDC X815 KDC 9015 User Manual
Kenwood Portable CD Player DPC 141 User Manual
Keys Fitness Treadmill HT402t User Manual
KitchenAid Cooktop 8286868A User Manual
KitchenAid Microwave Oven KEBK171SSS User Manual
Kodak Digital Camera CX6330 User Manual