Models KEYS700J, KEYS750J, KEYS850J, KGYS850J
3405635
Download from Www.Somanuals.com. All Manuals Search And Download.
DRYER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all
safety messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or
“WARNING.” These words mean:
You can be killed or seriously injured if you don't
immediately follow instructions.
You can be killed or seriously injured if you don't
follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you
what can happen if the instructions are not followed.
WARNING: For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, or to prevent property damage, personal injury, or death.
– Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this
or any other appliance.
– WHAT TO DO IF YOU SMELL GAS:
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in your building.
Clear the room, building, or area of all occupants.
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's
•
•
•
•
instructions.
If you cannot reach your gas supplier, call the fire department.
•
– Installation and service must be performed by a qualified installer, service agency, or
the gas supplier.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic
precautions, including the following:
■ Read all instructions before using the dryer.
■ Do not repair or replace any part of the dryer or
attempt any servicing unless specifically recom-
mended in this Use and Care Guide or in published
user-repair instructions that you understand and have
the skills to carry out.
■ Do not place items exposed to cooking oils in
your dryer. Items contaminated with cooking oils
may contribute to a chemical reaction that could
cause a load to catch fire.
■ Do not use fabric softeners or products to eliminate
static unless recommended by the manufacturer of
the fabric softener or product.
■ Do not dry articles that have been previously
cleaned in, washed in, soaked in, or spotted with
gasoline, dry-cleaning solvents, other flammable,
or explosive substances as they give off vapors
that could ignite or explode.
■ Do not use heat to dry articles containing foam rubber
or similarly textured rubber-like materials.
■ Do not allow children to play on or in the dryer.
Close supervision of children is necessary when
the dryer is used near children.
■ Clean lint screen before or after each load.
■ Keep area around the exhaust opening and adjacent
surrounding areas free from the accumulation of lint,
dust, and dirt.
■ Before the dryer is removed from service or dis-
carded, remove the door to the drying compart-
ment.
■ The interior of the dryer and exhaust vent should be
cleaned periodically by qualified service personnel.
■ Do not reach into the dryer if the drum is moving.
■ Do not install or store the dryer where it will be
■ See Installation Instructions for grounding require-
ments.
exposed to the weather.
■ Do not tamper with controls.
SAVE THESE INSTRUCTIONS
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS AND FEATURES
1
5
2
3
4
6
7
8
1. Control panel
*Reversible door – see Installation
Instructions
Additional features your dryer may
have
2. Model and serial number label
3. Drum light
Drying rack
Super wide-swing door*
4. Dryer drum
5. Lint screen
6. Exhaust grill
7. Electronic dryness sensor
8. Wide-opening hamper door
Control Panel
NOTE: The drawings in this book may vary from your dryer. They are designed to show all of the models covered by this book.
Your dryer may not include all features.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The exhaust vent can be routed up, down, left, right, or
straight out the back of the dryer. Space requirements are
listed in your Installation Instructions.
CHECKING
YOUR VENT
Your dryer must be properly installed and vented to achieve
maximum drying efficiency and shorten drying times. Use the
minimum recommended installation clearances (found in your
Installation Instructions) to avoid blocking the flow of combustion
and ventilation air. Refer to your Installation Instructions for more
information.
4. Use the straightest path possible when routing the exhaust
vent. Use the fewest number of elbows and turns. Allow
room when using elbows or making turns. Bend vent
gradually to avoid kinking.
5. Use duct tape to seal all joints. Do not use screws to secure
Fire Hazard
Use a heavy metal vent.
vent. Lint may catch on screws.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in
death or fire.
6. Clean exhaust vent periodically, depending on use, but at
least every 2 years, or when installing your dryer in a new
location.
If the dryer is not properly installed and vented, it will not be
covered under the warranty.
■
Disconnect vent from the dryer and clean one section at a
time until you reach the exhaust hood.
NOTE: Service calls caused by improper venting will be paid for
by the customer, whether it was a paid installation or self-
installed.
1. Do not use plastic vent or metal foil vent. Use 4 in (10.2 cm)
metal or flexible metal vent. Do not kink or crush flexible
metal vent. It must be completely extended to allow adequate
exhaust air to flow. Check vent after installation. Refer to your
Installation Instructions for proper length requirements of
vent.
■
Use the hose attachment on your vacuum, or a pole or
wire with a feather duster or rag attached, to clean out lint.
■
■
Be sure the flapper on the outside end of vent moves freely.
When cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer for final
product check.
2. Use a 4 in (10.2 cm) exhaust hood. Smaller hoods increase
SURE CONNECT™ Vent Kit (optional)
drying times.
For easy installation of your dryer, a complete exhaust vent kit is
available for purchase. The SURE CONNECT Vent Kit (No.
4396028) contains everything you need to install your dryer. You
can purchase a kit by calling 1-800-442-9991, or by contacting
the dealer from whom you purchased your dryer.
4"
(10.2 cm)
4"
(10.2 cm)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Turn the Cycle Control knob to the recommended cycle for
the type of load being dried. Use the Energy Preferred
Automatic Setting ( ) in the SENSOR DRY cycle to dry most
heavyweight and medium weight loads. See “Drying, Cycle
and Temperature Tips.”
*
USING
YOUR DRYER
Starting Your Dryer
3. Set the TEMPERATURE selector to the recommended setting
for the type of fabric being dried. See “Cycle Descriptions”
for suggested temperature settings.
4. (OPTIONAL) Your dryer may have an EXTRA CARE selector.
When you are unable to remove a load from the dryer as soon
as it stops, wrinkles can form. The EXTRA CARE feature
periodically tumbles, rearranges and fluffs the load without
heat to avoid wrinkling.
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
■
Set the EXTRA CARE selector to ON to tumble the load
without heat every few minutes up to 45 minutes after the
drying cycle ends. A signal will sound every few minutes
while EXTRA CARE is running, if the END OF CYCLE
SIGNAL is ON.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
■
■
Set the EXTRA CARE selector to OFF if you do not want
to run this feature.
On some models, the EXTRA CARE feature is automatic
and activates at the end of the SENSOR DRY cycle, if you
do not open the dryer door within a few minutes after the
cycle ends.
5. (OPTIONAL) Set the END OF CYCLE SIGNAL selector to ON,
or to the volume level you prefer (on some models), if you
want the dryer to sound a signal when a cycle is finished. The
signal is helpful when you are drying permanent press,
synthetics, and other items that should be removed from the
dryer as soon as it stops.
6. Push the START button.
Fire Hazard
Stopping and Restarting
No washer can completely remove oil.
You can stop your dryer anytime during a cycle.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
To restart your dryer
1. Close the door.
Failure to follow these instructions can result in
death or fire.
2. Select a new cycle and temperature (if desired).
3. Push START.
Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Clothes
CYCLE DESCRIPTIONS
Load clothes loosely into the dryer. Do not pack the dryer. Allow
space for clothes to tumble freely. The following chart shows
examples of balanced loads that would allow for proper tumbling.
Your new dryer uses the Temperature selector with the Cycle
Control knob to design a drying cycle to provide the shortest,
most efficient drying time and best fabric care for your load.
Heavy work
clothes
3 pair of pants, 4 pair of jeans, 2 pair of
overalls, 3 shirts
Delicates
3 camisoles, 1 robe, 4 slips,
6 undergarments, 2 sets of sleepwear,
1 child’s outfit
Towels
10 bath towels, 10 hand towels, 14 wash
cloths, 1 bath mat
Mixed Load
3 double sheets, 4 pillowcases,
8 T-shirts, 6 pair of shorts, 2 blouses,
8 handkerchiefs
Cycle Control knob
Drying, Cycle and Temperature Tips
Select the correct cycle and temperature for your load. Cool
Down tumbles the load without heat during the last few minutes
of all cycles to make the load easier to handle.
NOTE: This manual covers several different models. Your dryer
may vary from the model shown and may not have all of the
cycles and features described.
Drying tips
■
Follow care label directions when they are available.
SENSOR DRY Automatic Cycle
■
If you use fabric softener sheets, use only ones labeled as
dryer safe. Follow package instructions.
The automatic cycle uses an electronic control sensor that
senses the moisture in your load and shuts off the dryer when the
selected dryness is reached. The Cycle Control knob does not
move until the load is almost dry. After the cool down, the knob
automatically turns to an Off area and tumbling stops.
■
Remove the load from the dryer as soon as tumbling stops to
reduce wrinkling. This is especially important for permanent
press, knits, and synthetic fabrics.
Use this cycle for heavyweight and medium weight cotton items,
such as towels, linens, bedspreads, work clothes, blue jeans, and
corduroys. Set your dryer to a temperature setting that matches
the care label directions.
Cycle tips
■
Dry most loads using the Energy Preferred Automatic
Setting ( ) in the Sensor Dry cycle.
*
■
Use the Timed Dry cycle to thoroughly dry extra heavy items.
Dry most loads using the Energy Preferred Automatic Setting ( ).
*
When the cycle ends, check the dryness of your load.
Temperature tips
■
If the load is drier than you like, select a setting closer to Less
■
Use a High heat setting for drying heavyweight items such as
towels and work clothes.
Dry the next time you dry a similar load.
■
If the load is not as dry as you like, complete drying using the
Timed Dry cycle. The next time you dry a similar load, select a
setting closer to More Dry.
■
Use a Medium heat setting for drying medium weight items,
such as sheets, underwear, permanent press fabrics, and
some knits.
NOTE: Drying time with an automatic cycle varies according to
the type of fabric, size of load, and temperature setting. See
“Drying, Cycle and Temperature Tips.”
■
■
Use a Low heat setting for drying lightweight items such as
lingerie, blouses, dresses, and some knits.
If your dryer has a special Ultra Low or Extra Low
temperature setting, use this setting to reduce drying
temperatures and provide enhanced fabric care for delicates
and other fine fabrics.
■
■
Use an air cycle for rubber, plastic or heat sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you are unsure of the temperature to select for a load,
select a lower setting rather than a higher setting.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Timed Dry Cycle
Drying Rack
Use this cycle to complete drying if items are still damp after the
automatic cycle.
The drying rack is useful for machine drying items you would not
necessarily want to tumble dry or that you would normally line dry
(for example, tennis shoes, pillows, stuffed toys).
Timed Dry is also useful for:
If your model does not have a drying rack, you can order one by
calling 1-800-442-9991 or by contacting the dealer from whom
you purchased your dryer.
■
Heavyweight and bulky items, such as bedspreads and work
clothes and large loads that require a long drying time. Set
the Temperature selector to a heat setting that matches the
care label directions.
To use the drying rack
1. Slide rear pegs into the dimples on the back wall of the dryer.
■
Lightweight items, such as lingerie, blouses, and knits that
require a short drying time. Set the Temperature selector at
Low, Extra or Ultra-Low heat.
Lower the front legs to rest on the dryer opening.
Heavy Dry
Use this setting to thoroughly dry large or heavy items, such as
thick bath towels or robes. Set the Temperature selector at High
heat.
2. Put the wet items on top of the rack. Leave space between
the items so air can reach all the surfaces. Close the door.
Quick Press
Use this setting to remove wrinkles from items, such as clothes
packed in a suitcase or items wrinkled from being left in the dryer
too long. Set the Temperature selector at Low or Medium heat,
depending on the fabrics in your load.
NOTE: Do not allow items to hang over the edge of the rack.
3. Select the Timed Dry cycle and Temperature, or the Air
Tumble cycle. Items containing foam, rubber, or plastic must
be dried on a clothesline or by using an air cycle.
4. Push the START button.
Rack Dry
Use this setting with the drying rack to dry items without tumbling
them. See “Drying Rack.”
NOTE: The rack must be removed for normal tumbling.
Automatic cycles do not work with the drying rack.
This chart shows examples of items that can be rack dried and
the suggested cycle, temperature setting and drying time. Actual
drying time will depend on the amount of moisture items hold.
Air Tumble Cycle
Use this cycle for items that require drying without heat, such as
rubber, plastic and sheer fabrics. Since this cycle has no heat, the
Temperature selector setting will have no effect.
Rack Dry
Cycle
Temp
Time*
Wool Sweaters
Timed
Dry
Low
60
This chart shows examples of items that can be dried using an air
cycle.
Block to shape and lay flat on
the rack
Type of Load
Cycle Time*
Stuffed toys or pillows
Timed
Dry
Low
60
90
90
Foam rubber - pillows, padded bras,
stuffed toys
Cotton or polyester fiber filled
20 - 30
20 - 30
40 - 50
10 - 20
Plastic - shower curtains, tablecloths
Rubber-backed rugs
Stuffed toys or pillows
Air
Tumble
None
None
Foam rubber filled
Olefin, polypropylene, sheer nylon
Sneakers or canvas shoes
Air
Tumble
*(Minutes). Reset cycle to complete drying, if needed.
When using an air cycle
*(Minutes). Reset cycle to complete drying, if needed.
■
■
■
Check to see that coverings are securely stitched.
Shake and fluff pillows by hand periodically during cycle.
Dry item completely. Foam rubber pillows are slow to dry.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Dryer Interior
CARING FOR YOUR
DRYER
Cleaning the Lint Screen
Every load cleaning
The lint screen is located on the top of the dryer. Clean it before
each load. A screen blocked by lint can increase drying time.
To clean
Explosion Hazard
1. Pull the lint screen towards you. Roll lint off the screen with
your fingers. Do not rinse or wash screen to remove lint. Wet
lint is hard to remove.
Use nonflammable cleaner.
Failure to do so can result in death, explosion,
or fire.
To clean dryer drum
1. Make a paste with powdered laundry detergent and very
warm water.
2. Apply paste to a soft cloth.
OR
2. Push the lint screen firmly back into place.
IMPORTANT:
Apply a liquid, non-flammable household cleaner to the
stained area and rub with a soft cloth until all excess dye is
removed.
■
Do not run the dryer with the lint screen loose, damaged,
blocked, or missing. Doing so can cause overheating and
damage to both the dryer and fabrics.
3. Wipe drum thoroughly with a damp cloth.
■
Some towels made of synthetic fibers and natural fibers
(polyester and cotton blends) may shed more lint than other
towels, causing your dryer’s lint screen to fill up faster. Be
sure to remove lint from the lint screen before and after drying
new towels.
4. Tumble a load of clean cloths or towels to dry drum.
NOTE: Garments which contain unstable dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and will
not stain future loads of clothes. Dry unstable dye items inside
out to prevent dye transfer.
■
If lint falls off the screen into the dryer during removal, check
the exhaust hood and remove the lint. See “Checking Your
Vent.”
Removing Accumulated Lint from
Inside the Dryer Cabinet
As needed cleaning
Laundry detergent and fabric softener residue can buildup on the
lint screen. This buildup can cause longer drying times for your
clothes, or cause the dryer to stop before your load is completely
dry. The screen is probably clogged if lint falls off the screen.
Lint should be removed every two years, or more often,
depending on dryer usage. Cleaning should be done by a
qualified person.
Clean the lint screen with a nylon brush every six months or more
frequently if it becomes clogged due to a residue buildup.
Changing the Drum Light
The dryer light automatically turns on inside the dryer drum when
you open the door.
To wash
1. Wet both sides of lint screen with hot water.
2. Wet a nylon brush with hot water and liquid detergent. Scrub
To change the drum light
1. Unplug dryer or disconnect power.
lint screen with the brush to remove residue buildup.
2. Open the dryer door. Locate the light bulb cover on the back
wall of the dryer. Remove the screw located in the lower right
corner of the cover. Remove the cover.
3. Rinse screen with hot water.
4. Thoroughly dry lint screen with a clean towel. Replace
screen in dryer.
3. Turn bulb counterclockwise. Replace the bulb with a 10-watt
appliance bulb only. Replace the cover and secure with the
screw.
4. Plug in dryer or reconnect power.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Lint on load
TROUBLESHOOTING
First try the solutions suggested here and possibly avoid
the cost of a service call...
■
■
Is the lint screen clogged?
Clean lint screen. Check for air movement.
Is load properly sorted?
Sort lint givers (towels, chenille) from lint takers (corduroy,
synthetics). Also sort by color.
Clothes are not drying satisfactorily
■
■
Is the load too big or too heavy?
Dry smaller loads so lint can be carried to the lint screen.
■
Check the following:
Is the lint screen clogged with lint?
Was the load overdried?
Is the exhaust vent or outside exhaust hood clogged with lint,
restricting air movement? Run the dryer for 5-10 minutes.
Hold your hand under the outside exhaust hood to check air
movement. If you do not feel air movement, clean exhaust
system of lint or replace exhaust vent with heavy metal or
flexible metal vent. See your Installation Instructions.
Use correct dryer settings for load type. Overdrying can
cause lint-attracting static electricity. See “Drying, Cycle and
Temperature Tips.”
■
■
Was paper or tissue left in pockets?
Is pilling being mistaken for lint?
Pilling (surface fuzz) is caused by normal wear and
laundering.
Is the exhaust vent crushed or kinked? Replace with heavy
metal or flexible metal vent. See your Installation Instructions.
Has a fuse blown, or a circuit breaker tripped? Electric dryers
use 2 household fuses or breakers. The drum may be turning
but you may not have heat.
Stains on load or color change
■
Was dryer fabric softener properly used?
Add dryer fabric softener sheets at the beginning of the cycle.
Do not add fabric softener sheets to a warm load.
Has an air dry cycle been selected? Select the right cycle for
the types of garments being dried. See “Drying, Cycle and
Temperature Tips.”
■
■
Were items soiled when placed in the dryer?
Items should be clean before being dried.
For gas dryers, is the valve open on the supply line?
Are fabric softener sheets blocking the grill? Use only one
fabric softener sheet and only use it once.
Were items properly sorted?
Sort light colors from dark colors. Sort colorfast items from
noncolorfast items.
■
Is the dryer located in a room with temperature below
45ºF (7ºC)?
Proper operation of dryer cycles requires temperatures above
45ºF (7ºC).
Items shrinking
■
■
Was the dryer overloaded?
Dry smaller loads that can tumble freely.
■
■
Was a cold rinse water used? Was the load very wet?
Expect longer drying times with items rinsed in cold water
and with items that hold moisture (cottons).
Did the load overdry?
Check the manufacturer’s care label. Match dryer setting to
load type. See “Drying, Cycle and Temperature Tips.”
Is the load too large and heavy to dry quickly?
Separate the load to tumble freely.
Dryer will not run
■
Check the following:
Is the power cord plugged in?
Has a fuse blown, or has a circuit breaker tripped?
Was a regular fuse used? Use a time-delay fuse.
Is the dryer door firmly closed?
Was the START button firmly pressed?
Is a cycle selected?
Unusual sounds
■
■
Has the dryer had a period of non-use?
If the dryer hasn’t been used for a while, there may be a
thumping sound during the first few minutes of operation.
Is it a gas dryer?
The gas valve clicking is a normal operating sound.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Loads are wrinkled
ASSISTANCE
OR SERVICE
■
■
Was load removed from dryer at the end of the cycle?
Was dryer overloaded?
Dry smaller loads that can tumble freely.
Before calling for assistance or service, please check
“Troubleshooting.” It may save you the cost of a service call. If
you still need help, follow the instructions below.
■
Did load overdry?
Check the manufacturer’s care label. Match dryer setting to
load type. See “Drying, Cycle and Temperature Tips.”
When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
Odors
■
Have you recently been painting, staining or varnishing in
the area where your dryer is located?
If you need replacement parts
If you need to order replacement parts, we recommend that you
only use factory specified parts. These parts will fit right and work
right because they are made with the same precision used to
build every new KITCHENAID appliance. To locate factory
specified replacement parts in your area, call our Customer
Interaction Center or your nearest designated service center.
If so, ventilate the area. When the odors or fumes are gone
from the area, re-wash and dry the clothing.
■
■
If the dryer is electric, is it being used for the first time?
The new electric heating element may have an odor. The odor
will be gone after the first cycle.
®
If the dryer is gas, there may be a gas leak.
Turn off the gas supply line, leave your house and then call
your local gas company.
For assistance or service
Call the KitchenAid Customer Interaction Center toll free:
1-800-422-1230.
Garment damage
Our consultants provide assistance with:
■
■
■
■
■
Features and specifications on our full line of appliances
Installation information
■
Check the following:
Were zippers, snaps, and hooks left open?
Use and maintenance procedures
Accessory and repair parts sales
Were strings and sashes tied to prevent tangling?
Were care label instructions followed?
Were items damaged before drying?
Specialized customer assistance (Spanish speaking, hearing
impaired, limited vision, etc.)
■
Referrals to local dealers, repair parts distributors, and
service companies
KitchenAid designated service technicians are trained to fulfill the
product warranty and provide after-warranty service, anywhere in
the United States.
To locate the KitchenAid designated service company in your
area, you can also look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to KitchenAid with
any questions or concerns at:
KitchenAid Brand Home Appliances
Customer Interaction Center
c/o Correspondence Dept.
MD 8020
553 Benson Road
Benton Harbor, MI 49022-2400
Please include a daytime phone number in your correspondence.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
®
KITCHENAID DRYER WARRANTY
TWO-YEAR FULL WARRANTY
For two years from the date of installation, when this dryer is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid will pay for factory specified replacement parts and repair labor costs to correct defects in
materials or workmanship. Service must be provided by a KitchenAid designated service company.
FIVE-YEAR LIMITED WARRANTY
For five years from the date of installation, when this dryer is operated and maintained according to instructions attached to or
furnished with the product, KitchenAid will pay for factory specified replacement parts for the following components, if defective in
materials or workmanship: any electrical element on electric models; any burner on gas models; replacement of the motor.
TEN-YEAR LIMITED WARRANTY
For ten years from the date of installation, when this dryer is operated and maintained according to instructions attached to or furnished
with the product, KitchenAid will pay for factory specified replacement parts for the dryer drum and top/cabinet assembly should they
rust due to defects in materials or workmanship.
KitchenAid will not pay for:
1. Service calls to correct the installation of your dryer, including venting. Heavy 4 in (10.2 cm) metal exhaust vent must be used. Refer
to the venting section of this manual and your Installation Instructions.
2. Service calls to instruct you how to use your dryer, to replace house fuses or correct house wiring or reset circuit breakers, or to
replace owner accessible light bulbs.
3. Repairs when your dryer is used in other than normal, single-family household use.
4. Damage resulting from accident, alteration, misuse, abuse, fire, floods, acts of God, improper installation (including, but not limited
to, venting with plastic or flexible foil), installation not in accordance with local electrical and plumbing codes, or use of products not
approved by KitchenAid.
5. Replacement parts or repair labor costs for units operated outside the United States.
6. Pickup and delivery. This product is designed to be repaired in the home.
7. Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
KITCHENAID SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Outside the 50 United States, this warranty does not apply.
Contact your authorized KitchenAid dealer to determine if
another warranty applies.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, so this exclusion or limitation may not
apply to you. This warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
If you need service, first see “Troubleshooting.” Additional help
can be found by checking “Assistance or Service,” or by calling
our Customer Interaction Center at 1-800-422-1230 from
anywhere in the U.S.A. or write: KitchenAid Brand Home
Appliances, Customer Interaction Center, c/o Correspondence
Dept., MD 8020, 553 Benson Road, Benton Harbor, MI
49022-2400.
4/00
Dealer name____________________________________________________
Address ________________________________________________________
Phone number __________________________________________________
Model number __________________________________________________
Serial number __________________________________________________
Purchase date __________________________________________________
Keep this book and your sales slip together for future
reference. You must provide proof of purchase or installation
date for in-warranty service.
Write down the following information about your dryer to better
help you obtain assistance or service if you ever need it. You will
need to know your complete model number and serial number.
You can find this information on the model and serial number
label/plate, located on your appliance as shown in “Parts and
Features.”
3405635
05/00
Printed in U.S.A.
© 2000. All rights reserved.
® Registered Trademark/TM Trademark of KitchenAid, U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|