DataTraveler ® Locker+
This document is designed to help users with the DataTraveler® Locker+ security application. For
• The DataTraveler Locker+ is USB 2.0 High Speed compliant.
• It is comprised of a 100% Secure Partition backed by a Complex Password.
• For additional security, the DataTraveler Locker+ incorporates a Hardware Based Encryption.
Document No: 4808071-001.A01
DataTraveler® Locker+
10-05-2009
Download from Www.Somanuals.com. All Manuals Search And Download.
1 REQUIREMENTS
1.1 System
Windows
•
•
•
•
Pentium III Processor
16MB free disk space
USB 2.0
Operating Systems
o
o
o
o
Windows® 2000, SP4
Windows® XP (Home and Professional), SP1, SP2 and SP3
Windows® Vista, SP1 and SP2
Windows® 7
● Two available drive letters between physical drives and network shares.
Mac
•
•
•
16MB free disk space
USB 2.0
Operating Systems
o
Mac OS X 10.4.x - 10.6
1.2 Recommendations
• Mac - Avoid the use of keyboard USB ports and HUBs.
Document No: 4808071-001.A01
DataTraveler® Locker+
3
Download from Www.Somanuals.com. All Manuals Search And Download.
This area provides additional
tips, warnings, notes, etc.
where needed. Throughout
this document you may see
the following symbols.
2
GETTING STARTED (WINDOWS)
2.1 Initial Setup
1. Insert the DataTraveler® directly into an available USB port of a computer operating a
compatible Windows based system. A Found New Hardware message may appear
(Figure 1).
These symbols are an
indication that additional
information is available in
this area.
Figure 1: New Hardware Found
2. After the hardware installation is complete, the DTLocker+ Setup Wizard will guide you
through the initial setup. Select your language and click Next to continue (Figure 2).
Figure 2: Setup Wizard
3. If the Setup Wizard does not automatically appear, please do the following:
a. Double-click Computer (or My Computer) via the Windows Desktop.
b. Right-click the drive labeled DTLplus and select Explore.
c. Double-click DTLplus_Launcher.exe to execute the Setup Wizard.
Document No: 4808071-001.A01
DataTraveler® Locker+
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Accept the License Agreement to continue.
5. Set a device password for data protection (Figure 3). This password will enable the drive
to be used as removable storage. It will also protect the data stored on the drive.
The password must be a
minimum of 6 characters and
must not exceed 16
characters. It must also
contain three of the following
four characters: lower case
letters, upper case letters,
numeric characters and/or
special characters.
6. Re-enter the password for confirmation.
Two examples of a valid
complex password: ABc123
and bob$411.
Figure 3: Complex Password
7. Click Next to set your DTLocker+ password.
Document No: 4808071-001.A01
DataTraveler® Locker+
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Enter your Contact Information into the corresponding field (Figure 4). Click Finish to
continue.
Figure 4: Contact Information
9. The Wizard will automatically format the drive.
Never remove the DTLocker+
drive during the format
process.
Figure 5: DTLocker+ Format
10. A Format Complete window will display after the format is done (Figure 5). Click OK to
complete the initial DTLocker+ setup.
Document No: 4808071-001.A01
DataTraveler® Locker+
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3
USING DTLOCKER+ (WINDOWS)
3.1 Login to DTLocker+
1. After the initial Setup is complete, you will automatically be logged into DTLocker+.
Hereafter, you will login to DTLocker+ promptly after inserting the drive into the USB
port. If you were not automatically logged in by the initial setup, enter your password to
access the data stored on the DTLocker+ drive (Figure 6).
Figure 6: DTLocker+ Login
3.2 Browsing the DTLocker+
1. The DTLocker+ is broken down into two (2) partitions (Figure 7).
•
•
DTLplus is a read-only partition containing the DTLocker+ system files.
Windows 7 Non Admin User -
The data partition may not
mount until after DTLocker+
login.
KINGSTON (or Removable Disk) is the read/write partition for data storage, protected by
the complex password.
Figure 7: DTLocker+ Partitions
Document No: 4808071-001.A01
DataTraveler® Locker+
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Exploring the DTLocker+ Features
Additional features are available via the DTLocker+ icon located in the System Tray
(Figure8).
Windows 7 users may need to
click “Show hidden icons”
arrow to display the
The options are as follows:
•
•
DTLocker+ Settings – Allows you to select the Language your DTLocker+ features will
display in. You can also change the Contact Information and the Password / Password Hint.
DTLocker+ System Tray icon.
Browse DTLocker+ – Will launch Windows Explorer enabling you to view the data in your
read/ write partition.
Figure 8: DTLocker+ Icon Features
Document No: 4808071-001.A01
DataTraveler® Locker+
8
Download from Www.Somanuals.com. All Manuals Search And Download.
• Format DTLocker+ – This option is used to format your DataTraveler Locker+
drive (Figure 9).
All data in the read/ write
partition will be lost!
The DTLocker+ password is
required in Windows XP/2000
(non admin users) and
Windows 7 and Vista (all
users) to format the drive.
DTLocker+ includes a
“lockdown” for enhanced
security. This lockdown will
lock the DTLocker+ whenever
a maximum number of
unsuccessful password
attempts exceed a pre-
configured value (see section
3.4 Secure Storage for
details).
Figure 9: Format - DTLocker+
•
•
Online Support – Takes you directly to Kingston’s on-line technical support.
About DTLocker+ – Used to obtain important information such as: DTLocker+ Version,
Firmware Version, and Serial Number.
Internet service is required for
the Online Support feature.
•
Shut down DTLocker+ – Will stop the DTLocker+ drive for safe removal. Once you
receive the confirmation you can safely remove the DTLocker+ from the USB port.
Document No: 4808071-001.A01
DataTraveler® Locker+
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Secure Storage
In addition to the complex password, all of the data stored on the DTLocker+ is secured
with a 256-bit AES Hardware Based Encryption. The DTLocker+ also includes a
“lockdown” for enhanced security. This lockdown will permanently block the DTLocker+
whenever a maximum number of unsuccessful password attempts exceed a pre-configured
value (the default value for the DTLocker+ is 10). In such an event, you will be forced to
format DTLocker+ to regain operation (Figures 10a-10b).
All data will be lost after the
format is complete!
Figure 10a: Login Failure & Countdown
Figure 10b: DTLocker+ Lockdown
Document No: 4808071-001.A01
DataTraveler® Locker+
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4
GETTING STARTED (MAC)
4.1 Initial Setup
1. Insert the DataTraveler® Locker+ (DTLocker+) directly into an available USB port of a
computer operating a compatible Mac OS X system. Double-click on the DTLplus icon
which appears on the Desktop (Figure 11).
Figure 11: DTLplus (Mac) Desktop Icon
Document No: 4808071-001.A01
DataTraveler® Locker+
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the Mac folder. Once the folder opens, double-click the DTLocker+ application icon
to launch the DTLocker+ Setup Wizard (Figure 12).
Figure 12: DTLocker+ (Mac) Folder
3. The DTLocker+ Setup Wizard will guide you through the initial setup. Select your language
and click Next (Figure 13). Accept the license agreement to continue.
Figure 13: DTVP (Mac) Setup Wizard
Document No: 4808071-001.A01
DataTraveler® Locker+
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Set a device password for data protection (Figure 14). This password will enable the drive to
be used as removable storage. It will also protect the data stored on the drive.
5. Re-enter the password for confirmation.
The password must be a
minimum of 6 characters
and must not exceed 16
characters. It must also
contain three of the
following four characters:
lower case letters, upper case
letters, numeric characters
and/or special characters.
Good examples of a
complex password: ABc123
or bob$411.
Figure 14: DTLocker+ (Mac) Complex Password
6. Click Next to set your DTLocker+ password.
Document No: 4808071-001.A01
DataTraveler® Locker+
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Enter your Contact Information into the corresponding fields (Figure 15). Click Next to
continue.
Figure 15: DTLocker+ (Mac) Contact Information
8. The Wizard will automatically format the drive.
Never remove or attempt to
access the DTLocker+ drive
during the format process!
Figure 16: DTLocker+ (Mac) Format Complete
9. A Format Complete window will display after the format is done (Figure 16). Click OK to
complete the initial DTLocker+ setup.
Document No: 4808071-001.A01
DataTraveler® Locker+
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5
USING DTLOCKER+ (MAC)
5.1 Login to DTLocker+
1. After the initial Setup is complete, you will automatically be logged into DTLocker+.
However, hereafter you will manually login to DTLocker+ after inserting the drive into the
USB port. Locate and launch the DTLocker+ application via DTLplus>Mac. Enter your
password to access the data stored on the DTLocker+ drive (Figure 17).
Figure 17: DTLocker+ (Mac) Login
5.2 Browsing the DTLocker+
1. DTLocker+ is broken down into two volumes (Figure 18).
•
•
DTLplus is a read-only partition containing the DTLocker+ system files.
KINGSTON is the read/write partition for data storage, protected by the complex password.
Figure 18: DTLocker+ (Mac) Volumes
Document No: 4808071-001.A01
DataTraveler® Locker+
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Exploring the DTLocker+ Features
Additional features are available via the DTLocker+ icon located in the Mac Dock (Figure
19). Click and hold the DTLocker+ icon to view the features below.
Mac OS X 10.6 users may
need to press and hold the
control key prior to selecting
the DTLplus icon to display
these features.
Figure 19: DTLocker+ (Mac) Icon Features
•
•
DTLocker+ Settings – Allows you to select the Language your DTLocker+ features will
display in. You can also change the Contact Information and the Password / Password Hint.
Browse DTLocker+ – Will launch Windows Explorer enabling you to view the data in your
read/ write partition.
Document No: 4808071-001.A01
DataTraveler® Locker+
16
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Format DTLocker+ – This option is used to Erase your DataTraveler® Locker+ drive
(Figure 20).
All data in the read/write
partition will be lost during
format!
DTLocker+ includes
“lockdown” for enhanced
security. This lockdown will
lock the DTLocker+
whenever a maximum
number of unsuccessful
password attempts exceed a
pre-configured value.
Internet connection is
required for the “Online
Support” feature to work.
Figure 20: DTLocker+ (Mac) Format Warning
DTLocker+ must remain
present for quick login to
function properly. The
“Keep in Dock” feature
should be enabled only
while the drive is inserted.
Prior to ejecting the drive,
this feature should be
disabled.
•
•
Online Support – Takes you directly to Kingston’s on-line technical support.
About DTLocker+ – Used to obtain important information such as: DTLocker+ Version,
Firmware Version, and Serial Number.
•
•
•
Shut down DTLocker+ – Will stop the DTLocker+ drive for safe removal. Once you
receive the confirmation you can safely remove the DTLocker+ from the USB port.
Keep in Dock - Will keep DTLocker+ in the Dock (for quick login) after DTLocker+
logout.
Open at Login - Will add DTLocker+ to your Login Items, causing it to automatically
launch at login.
DTLocker+ must be present
during login in order for the
“Open at Login” feature to
function properly.
Show in Finder - Opens a new Finder window and displays the DTLocker+ application
contents.
Document No: 4808071-001.A01
DataTraveler® Locker+
17
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Hide/Show - Will minimize and/or maximize the active/visible DTLocker+ window.
Quit - Will discontinue access to the data partition.
The “Quit” feature will
remove the Kingston
partition from the Desktop.
However, to dismount the
CD partition, you must drag
the CD icon to the trash.
5.4 Safely Eject DTLocker+
1. To safely eject the DTLocker+ drive, select “Shut down DTLocker+” from the Mac Dock
icon (Figure 21). You can now safely eject the DTLocker+ drive.
For the best user experience,
select “Shut down
DTLocker+” to properly
shut down the DTLocker+
drive.
It is recommended that the
DTLocker+ drive be
removed from the USB port
once it has been ejected.
Figure 21: Safe Ejection (Mac)
Document No: 4808071-001.A01
DataTraveler® Locker+
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Secure Storage
In addition to the complex password, all of the data stored on the DTLocker+ is secured
with a 256-bit AES Hardware Based Encryption. The DTLocker+ also includes a
“lockdown” for enhanced security. This lockdown will permanently block the DTLocker+
whenever a maximum number of unsuccessful password attempts exceed a pre-configured
value (the default value for the DTLocker+ is 10). In such an event, you will be forced to
reinitialize/format DTLocker+ to regain operation (Figures 22a-22b)
All data will be lost after the
format is complete!
Figure 22a: DTLocker+ (Mac) Login Countdown
Figure 22b: DTLocker+ (Mac) Lockdown
Document No: 4808071-001.A01
DataTraveler® Locker+
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6 FAQS
FAQs are used to bring you frequently asked questions, which may surface during the use of a product. Below we have
posted the most common FAQs for quick viewing. For the latest technical documentation, please visit Kingston’s on-line
Q1) I inserted the DTLocker+ and it does not show up in Computer (My Computer) or I receive a “DTLocker+ requires two
free drive letters” error message.
A1) This is a common Windows issue caused by drive letter conflicts in the following configurations:
a. When network drive letter(s) follow directly after physical drive (e.g. Hard Drive, CD-ROM) letters.
b. When two consecutive drive letters are not presently available.
The first time a particular flash drive is inserted into the computer, Windows may assign it a drive letter already taken by
a network share. The quickest way for administrative users to solve this problem is to manually change the drive letter of
the DTLplus CD Partition via Disk Management. Disk Management is located in Control Panel -> Administrative Tools
-> Computer Management.
Note: By default, non-administrative users cannot change drive letters for flash drives. Contact your IT
department for assistance.
If the launcher does not auto-run, reinsert the drive or manually run the Launcher from the DTLplus CD partition.
See Microsoft Knowledge Base article for details at: http://support.microsoft.com/kb/297694
Note: If the launcher still does not run, you may need to disable or upgrade any third party hard disk encryption
software.
Q2) I inserted my DTLocker+ into the USB port but it did not run.
A2) Occasionally Microsoft Windows may not launch the auto-run code for removable drives. If this happens, the DTLplus
CD partition may appear in Computer (or My Computer) even though the password prompt never appears. To resolve,
manually launch the DTLocker+ software. To manually launch the software, access the DTLplus CD partition via
Computer (My Computer) and double-click DTLplus_Launcher.exe.
Note: The auto-run may also be disabled in the registry or by using GPO rules. Please check with your system
administrator for details.
Q3) Every time I login to the DTLocker+ drive on a Windows 7 and/or Vista™ computer, an AutoPlay dialog appears with
the option to “Speed up my system using Windows ReadyBoost.” What is this feature?
A3) ReadyBoost™ is a Windows 7 and Vista™ feature that will utilize USB flash drive storage space to improve system
performance. Unfortunately, DTLocker+ does not support Windows ReadyBoost™.
Document No: 4808071-001.A01
DataTraveler® Locker+
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|