k i s s - t e c h n o l o g y. c o m
USER GUIDE
KiSS VR-558 Digital Video Recorder
It’s not just about playing DVDs
Download from Www.Somanuals.com. All Manuals Search And Download.
What's in the box
1
The following elements are included in the box.
KiSS VR-558
KiSS PC-Link Software CD
Batteries for the remote
Remote Control
Power cable
Composite Video
Antenna Cable
SCART Cable Provided in Europe only
S-Video Not provided in Europe
Audio cable
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Overview
2
8
5
1
2
3
4
6
7
Front panel
1
2
3
4
5
6
7
Stop
Eject
Play
Pause
TV Tuner Mode
Previous Chapter
Next Chapter
On the front panel
9
Composite Video Output
10 Analog Audio Output
11 S-Video Output
9
10 11
After holding down
Record
8
Back panel
4
7
2
13
9
1
2
3
4
5
6
7
8
9
Trigger 12v in/out
TV Antenna in/out
Ethernet
SCART in/out
Composite Video Output
S-Video Output
Component Video Output
Analog Audio Output
Coaxial Audio Output
10 Optical Audio Output
11 Composite Video Input
12 S-Video Input
13 Component Video Input
14 Analog Audio Input
15 Analog Audio Input
16 Player Reset
17
5
6
8
11
14 15 16
1
3
18
10
12
17 On/Off Button
18 AC Input
Remote control
1
1
2
3
4
5
6
7
8
9
Standby
Open/Close
Record
Delete
Back
Up Arrow
Left Arrow
Play/Pause/Enter
Right Arrow
15 List
16 Setup
17 Mark
18 Audio
19 Title Menu
20 Subtitle
21 Input
22 TV
23 HDD
10 Down Arrow
11 Previous Chapter
12 Stop
13 Next Chapter
14 Menu
24 Online
25 Zoom
26 Decrease Volume
27 Increase Volume
28 Store
5
3
4
2
6
9
8
7
10
11
14
13
16
12
15
20
17
18
19
21
25
24
28
22 23
26 27
Download from Www.Somanuals.com. All Manuals Search And Download.
6
How to connect my player
3
We recommend connecting your player to your television using the SCART cable that comes with your player. The SCART cable is the biggest cable with the large connectors in the ends.
Connect one end of the SCART cable to “SCART OUT” on your player. Connect the other end to the SCART input on your television. Then connect the antenna cable coming from your roof
or the wall with “TV IN” on the player. Connect “TV OUT” with the antenna input on your television using the provided cable. Connect the power cable to the power connector.
If your television does not have a SCART connector, you will have to connect both audio and video with separate cables.
For connecting video, you have the following options:
• VIDEO (composite video)
• S-VIDEO (or “super-VHS”, provides a better quality than VIDEO)
• COMPONENT VIDEO (provides an even better quality than the above)
After connecting the video, you will have to connect the audio. You can connect the audio to either the television or your HiFi set. The VR-558 outputs both analog and digital audio. Analog
audio is the most common format, and is supported by most devices. Digital audio is more common on high-end equipment and surround amplifiers.
For connecting the audio, you have the following options:
• Connect ANALOG AUDIO OUT to your television using phono (RCA) jacks
• Connect ANALOG AUDIO OUT to your HiFi stereo using phono (RCA) jacks
• Connect COAXIAL or OPTICAL digital audio to your HiFi stereo
Video connection
Connecting your KiSS VR-558 DVD player to your TV can be done using any of the cables below.
(Only one cable can be connected at a time)
1
2
3
4
5
RGB via SCART
S-Video (the cable is an extra accessory)
Composite via SCART
Composite Video
Component SCART (the cable is an extra accessory)
KiSS VR-558
TV
5
4
2
1
3
Audio connection
Connecting your KiSS VR-558 DVD player to your amplifier can be done using any of the cables below.
(Only one cable can be connected at a time)
1
2
3
Analog Stereo
Coaxial Output (the cable is an extra accessory)
Optical Output (the cable is an extra accessory)
KiSS VR-558
Amplifier
2
3
1
Antenna connection
Connecting your KiSS VR-558 DVD player to your TV Antenna
1
2
Antenna In (Going to the roof Antenna)
Antenna Out (Going to the player, use provided cable)
1
KiSS VR-558
TV
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7
PC to DVD connection
4
Connection using a router
Internet
Router
Internet
KiSS VR-558
KiSS VR-558
Router
PC
PC
Switch
Equipment required
•
•
•
•
A router, with a built-in switch or a separate switch/hub.
2 or 3 straight Ethernet cables.
A Windows PC with an Ethernet connection.
The KiSS PC-link program.
Step-by-Step Guide
1
2
3
4
5
6
7
8
9
Connect the player to the router’s built-in switch or an external switch/hub which is connected to the router.
Connect the PC to the router’s built-in switch or an external switch which is connected to the router.
Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider).
Install KiSS PC-Link on the PC and select the content to be shared with your player.
Start the player, select SETUP and then select ETHERNET - TCP/IP. Check that DHCP Client is ENABLED. Press SETUP to exit this menu.
Press MENU and go to PC-LINK.
Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it.
Choose between Audio, Video or Picture. The player will display the list of files available from your PC.
If you have any problems please check the FAQ on our web site for any questions If that doesn’t help then contact the KiSS Hotline
Your player should now be connected
Network with a PC using Internet connection sharing
Internet
Internet
KiSS VR-558
KiSS VR-558
Switch
PC
PC
Crossed cable
Equipment required
•
•
•
Switch/hub and 2 straight cables or a crossed cable.
A windows PC with an Ethernet connection.
The KiSS PC-link program.
Step-by-Step Guide
1
2
3
4
5
6
7
8
9
Connect the player to the PC with a crossed cable or to a switch/hub connected to the PC.
Connect the PC to the Internet (LAN/Modem/ADSL).
Check that your Internet connection is working. If any problems occur, contact your ISP (Internet Service provider)
On the PC select Network Connection in the Control Panel. Open Properties for the network connection that is connected to the Internet.
Select Advanced where you enable Internet connection sharing.
Install KiSS PC-Link on the PC and select the content to be shared with your player.
Start the player, select SETUP and then select ETHERNET - TCP/IP. Check that DHCP Client is ENABLED. Press SETUP to exit this menu.
Press MENU and go to PC-LINK.
Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it.
10 Choose between Audio, Video or Picture. The player will display the list of files available from your PC.
11 If you have any problems, please check the FAQ on our web site for any questions. And if that doesn’t help then contact the KiSS Hotline
Your player should now be connected
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Network using a direct Internet connection
Internet
Internet
KiSS VR-558
Switch
KiSS VR-558
PC
Crossed cable
Equipment required
•
•
•
Switch/hub and 2 straight cables or a crossed cable.
A windows PC with an Ethernet connection.
The KiSS PC-link program.
Step-by-Step Guide
1
2
3
4
5
With a direct Internet connection, you can only access the online features such as WebRadio. KiSS PC-Link can NOT be enabled.
Start the player, select SETUP and then select ETHERNET - TCP/IP, check that DHCP Client is ENABLED.
Press SETUP to exit this menu.
Press ONLINE on your remote to select the service you wish to use.
If you have any problems please check the FAQ on our web site for any questions, and if that doesn’t help then contact the KiSS Hotline.
Your player should now be connected
Network using a direct connection to the PC
KiSS VR-558
Switch
KiSS VR-558
PC
PC
Crossed cable
Equipment required
•
•
•
Switch/hub and 2 straight cables or a crossed cable.
A windows PC with an Ethernet connection.
The KiSS PC-link program.
Step-by-Step Guide
1
2
Connect the player to the PC with a crossed cable or to a switch connected to the PC.
On the PC select Network Connection in the Control Panel.
Open Properties for the network connection that is connected to the Player.
Select Properties for the Internet Protocol (TCP/IP).
Select “Use the following IP address” and enter the IP address below:
IP address 192.168.0.1
3
4
Subnet mask 255.255.255.0
5
6
7
Select SETUP on the player, then ETHERNET - TCP/IP and set the DHCP client to DISABLED
Select “ENTER THE TCP/IP SETTINGS MANUALLY”
Then enter the following addresses:
IP ADDRESS: 192.168.000.002
NETWORK MASK: 255.255.255.000
DEFAULT GATEWAY: 192.168.000.001
DNS SERVER: 192.168.000.001
8
9
Press SETUP to exit this menu Then MENU and go to PC-LINK.
Press SEARCH FOR PC-LINK HOST, the name of the server should appear on your screen, press ENTER to select it.
10 Choose between Audio, Video or Picture. The player will display the list of files available from your PC.
11 If you have any problems, please check the FAQ on our web site for any questions. If that doesn’t help then contact the KiSS Hotline.
Your player should now be connected.
Possible errors.
- Cable problem, check that there is light in all the ports of the switch/hub
- There is a firewall installed on the PC which blocks the ports used by KiSS PC-link (port 8000 must be open)
- The player and the PC are not on the same Subnet (problem with playing video)
- Your PC has been assigned a new IP address from the DHCP server. It may differ from the one entered in the player. (Using a static IP on the PC will counter this)
- KiSS PC-Link has to be running for the player to access the data
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Quick setup
5
If your DVD Player is correctly connected, the language selection menu will appear.
1. Select Language
Select your preferred language
2. Select Region
From a list, choose the part of the world you live in. Then select your country.
3. Video Setup
Specify how your DVD Player is connected to your TV or monitor.
4. Display Format
Select between standard TV type (4:3) or wide screen TV type (16:9).
- If this menu does not appear when you start the DVD Player, re-check the cable connections.
- You can always go back and start again if you happen to do something wrong, Just press on the SETUP button of your remote, go to MISC. SETTINGS and select QUICK SETUP.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
5. Audio Setup
Select which audio output is used on your DVD Player. The default Audio selection should be stereo unless your player is
connected to a digital amplifier.
6. Format Hard Disk
You will be asked to format (erase) your Hard Disc. KiSS advise you to do this the first time you connect your player. Remember
that formatting the Hard Disk will delete all content held on it. Formatting takes a few minutes, when it is finished, press
DONE.
7. Tuning TV Channels
This last screen will ask you to choose if you wish to tune your TV Channels automatically. Pressing OK will start autoscan,
DONE will exit the Quick Setup.
Television Function
6
To use the VR-558 it is important that you watch television through your VR-558
Watching Television
Match channel - Select Country
Press TV on your remote to make sure that you are watching television through the VR-558. You can scroll the Channels by
pressing the UP and DOWN ARROWS of your remote. If you are connected to Broadband Internet, you can "map" (register) the
channels. Press LIST to view the on-screen options, when you see CONFIGURE EPG ID, select by pressing ENTER. Choose your
country, and the channel you are mapping. Repeat this operation for all your channels. Now the channel name appear on the top
left corner of your screen. By doing this, you also have added your channels to the TV Guide's (EPG) favorites. This will be helpful
for future scheduled recording via EPG. See KiSS Online chapter for more information.
Australia
Belgium
Austria
Croatia
Czech Republic
Estonia
Denmark
Faroe Island
France
Finland
Germany
Hungary
Greenland
Iceland
Ireland
Latvia
Italy
Lithuania
Luxembourg
New Zealand
Netherlands
Norway
d c Prev/Next page
h g W Select item
f e Move item
Page 1/2
Back
Enter name manually
- None of the recording functions will work if the Player is not correctly tuned
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Advanced setup
7
Accessing the advanced setup menu by pressing SETUP on the remote control will enable the user to edit and modify the settings of the DVD Player as follows:
Regional settings
This menu enables you to specify the country in which this player is being used. You can also edit the time zone where you are
situated. This will help the DVD Player select the correct TV system and language. The Player's menu language as well as the
different default DVD languages can be set in this section.
Video output
This section enables you to configure video output. Your Television display type can be modified as well as the TV system or
the choice of video output.
Audio output
This menu enables you to specify the audio connection used.
TV tuner
Scan and store all TV Channels automatically, select TV system, manage TV channels and erase all TV channels. See next
chapter to learn how to manage your television channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
TV channels manager
Select TV TUNER and choose MANAGE TV CHANNELS. A list of the available channels will appear. Select the channel you want
to move by pressing ENTER. The selected line will become yellow. Select now the other channel to be moved by pressing ENTER.
The two channels will be swapped. Press the left arrow to exit the TV Channel Manager.
To find out how to rename TV Channel, please look under the Electronic Program Guide Section.
Ethernet configuration and FTP Access
Choose the Ethernet Configuration menu to setup a network connection between a PC and your DVD Player. Connecting your DVD
player to a network enables you to use the online services and play audio/video/ pictures files from your connected PC with KiSS
PC-Link. Depending how your VR-558 and your PC are connected together, you will require to ENABLE or DISABLE DHCP Client.
To know if you need either or, please refer to the PC TO DVD CONNECTION section. If you decide to DISBALE DHCP Client, a
new section will appear: ENTER THE TCP/IP SETTINGS MANUALLY. Read the section below to see how to set this up. Read also
below how to set up NTP Client. Choose SHOW CURRENT TCP/IP SETTINGS to view your VR-558's current network settings and
connect to your Hard Disk via FTP. Refer to the MANAGING YOUR HARD DISK chapter to learn how to set up the FTP.
Setting DHCP Client
DHCP Client holds the parameters of your Player's Network settings (IP address, Subnet mask, DNS...). Leave this menu ENABLED
if you have connected your player to a network that involves Internet. This way the player will set the parameters automatically.
DISABLED should only be selected if you have a connection that doesn't involve Internet. If you just connect your player to your
PC by a straight cable for example. By selecting DISABLED, you will be asked to ENTER THE TCP/IP SETTINGS MANUALLY. The
numbers should be different than the ones on your PC. We recommend to use the following numbers:
IP Address: 192.168.000.002; Network Mask: 255.255.255.000; Default Gateway: 192.168.000.001; DNS Sever: 192.168.000.001.
You will now be able to establish a connection between your PC and Player. See PC TO DVD CONNECTION, NETWORK USING
A DIRECT CONNECTION TO THE PC for more details.
NTP Client (Network Timing), PC-Link Server and Web Schedule
If your VR-558 is on a network connected to the Internet, you can choose to get the displayed time automatically from the
Internet. To do so, turn on Network Timing (NTP Client) by selecting ENABLED. If you decide to DISABLE this function, you will
need to enter the time and date information yourself by going to REGIONAL SETTINGS and TIME or DATE.
PC-LINK SERVER allows you to watch the content of your Hard Disk on other KiSS Players.
WEB SCHEDULE enable you to schedule recordings via the web, a mobile phone or a PDA. See Chapter 13 KiSS Remote EPG
for more details.
Misc. settings
The misc. settings available in the advanced setup will enable you to set many different options, such as PARENTAL CONTROL, or
FRONT PANEL BRIGHTNESS. To set PARENTAL CONTROL for the first time, select first PARENTAL CONTROL PASSWORD, enter
a 4 digit number, then repeat it to confirm it. Then, select PARENTAL CONTROL LEVEL, enter your 4 digit password. You can now
choose between: OFF (No control), G (Suitable for general audiences), PG (Parental guidance suggested), PG13 (Parental guidance
suggested, unsuitable for children under 13), R (Restricted, unsuitable for young viewers), NC17 (Adult content, unsuitable for
children under 17). You can also RESTORE DEFAULT SETTINGS of your player or choose to go back to the QUICK SETUP menu.
A sixth section named FORMAT HARD DISK is also available from this menu. It enables you to format (erase) your Hard Disk
completely. Just select FORMAT HARD DISK and choose OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Video Recorder Functions
8
We advise you to watch the television through the VR-558. Just use your TV as a picture display while the KiSS VR-558 will be at the center and host all the commands you need to change
channels. It will make it easier and quicker to use the recording functions.
Setting quality
Before starting recording we advise you to take a look at our quality settings. To specify the recording quality you will need to
choose between:
-Long Play: Records with a medium quality, but doesn't take up so much space on the hard disk.
-High Quality: Records at the highest quality, but takes up more hard disk space.
To set aquality, press MENU on your remote, then go to VIDEO RECORDER FUNCTIONS, then RECORDING QUALITY. You will be
asked to choose a quality. Please refer to the chart below for quality settings. Press the LEFT ARROW to exit the list.
Quality Settings Chart
Quality
Bit Rate
Approx. Recording Time - 300GB Hard Disk
SHQ (Super High Quality)
8 Mbits/sec
6 Mbits/sec
4 Mbits/sec
3 Mbits/sec
2 Mbits/sec
1.5 Mbits/sec
79 hours
105 hours
155 hours
203 hours
296 hours
385 hours
HQ
SQ
EP
LP
(High Quality)
(Standard Quality)
(Extended Play)
(Long Play)
SLP (Super Long Play)
Easy recording
Turn on the Player and select the desired channel with the Up/Down buttons on the remote. Once the desired channel appears
on the TV screen, press RECORD on the remote. The content from the TV channel is recorded onto the Hard Disk at the quality
previously chosen. When recording is finished, press the STOP button. Pressing RECORD repeately sets a limit on the recording
time. If WEB Schedule is enabled and the channel is mapped, the default recording time is automatically set to the end of the
program. Press RECORD again to add extra time.
Time Shifting
Time Shifting makes it possible to pause live TV if you need to go away from it for any reason. It allows you to pause the running
program and start it again at any given moment. It works by saving the watched TV program on the VR-558's Hard Disk while the
television screen is on pause mode. For that you need to watch a TV program through the VR-558. Just press PLAY/PAUSE. The
TV will freeze, recording will start in the pre-set quality. Press the PLAY/PAUSE button again to resume watching. You will be
able to carry on watching your program while the VR-558 carries on recording. You can navigate through this on-going recording
by pressing the FAST FORWARD and REWIND buttons.
- The Quality Chart figures are based on recording on an empty 300GB Hard Disk.
- These figures will change if content is already present on the player’s built-in Hard Disk
- The KiSS VR-558 encodes movies in MPEG-2 format. (.vob files)
- Before recording, check the status of the Hard Disk and scheduled recording by pressing SETUP or MENU. The status appears on the top right hand corner of your screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Accessing recording
Turn the player on, then press MENU. Go to VIDEO RECORDER FUNCTIONS ans select RECORDED VIDEOS. The list of your videos
will be shown and named as follow:
P01 BBC - MON 01-01-2004 12:00:00.vob (Channel number, Channel name, date of recording, hour of recording)
Select the recording you wish to see and press ENTER to start it.
If you want to rename your recordings, you will need to establish and FTP connection between your VR-558 and your PC and
change the file recording's file name. See the HARD DISK chapter to learn how to establish an FTP connection.
Removing recordings
Once you have seen a recording, and you would like it to be deleted, go to MENU, then RECORDED VIDEO to display the list of
items saved on your Hard Disk. Go the video to be deleted with the UP and DOWN arrows. Select it with the MARK button of the
remote. Its icon will become yellow. Press DELETE to remove it permanantly.
Scheduling recording
The KiSS VR-558 will let you schedule a recording. Turn the Player ON and press MENU from your remote, then select VIDEO
RECORDER FUNCTIONS followed by SCHEDULE NEW RECORDING. Press ENTER and use the UP and DOWN arrows from the
remote to set the recording date, its starting time, ending time, the channel you want recorded and the quality you want it to be
recorded at. Check the quality settings chart below if you are unsure of the quality to set. Select OK to save the recording. You
can now see that on the Player's status on the top right corner is written: 1 scheduled recording. Press MENU to get out of the
main menu, and STANDBY to turn the VR-558 off. Your recording will start at the scheduled moment.
Modify scheduled recordings
If you have set one or many recordings, this menu item brings up a calendar list of scheduled recordings. It enables you to edit or
erase a scheduled program. To edit a scheduled recording press MENU and go to RECORDING SCHEDULE. Select the schedule
you want to modify and press ENTER. You can now choose the item to change with the UP and DOWN arrows and by pressing
ENTER to select. Select OK to save the modify recording. To delete a scheduled recording, press MENU and go to RECORDING
SCHEDULE. Select the schedule to remove and press DELETE on your remote. The planned recording is now gone.
Access to KiSS TV Guide (EPG)
An access to KiSS TV Guide is provided under the VIDEO RECORDER FUNCTIONS menu. It is a straight access to the recording
functions through the EPG. Refer to our section about the EPG (KiSS ONLINE CHAPTER) to learn more about its recording
functions.
- To have their own names, TV Channels need to be mapped. Go to TELEVISION FUNCTION to learn how to map your channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Hard Disk
9
The VR-558 has a built-in Hard Disk. This storage place enable it to store your recordings as we have seen it in the previous chapters, but it also enable you to save audio, video and
picture files.
Accessing the Hard Disk
Press MENU from your remote, and go to the HARD DISK section. Choose between Audio Files, Video Files or Picture Files, if
you have copied anything on your Hard Disk, you will be able to view the list of its content. Recordings are not available from
this menu, only elements that have been copies from your PC or from a CD. Once you get to the list of copied elements, select
the file to be played and press ENTER to start it.
Copying and deleting files to the Hard Disk
Copying from KiSS PC-Link: Start KiSS PC-Link and make sure your player and your PC are connected together (See PC TO
DVD CONNECTION chapter). Press MENU on your player's remote, then go to the PC-Link section. Go to SEARCH FOR PC-LINK
HOST, your server name should appear, select it. Choose either AUDIO/VIDEO or PICTURE FILE to view the list of item from your
PC. Select the file(s) to be copies by pressing MARK on your remote. When you have finished selecting the file(s), press ENTER.
Copy will start immediately. Go to the HARD DISK section, select either AUDIO/VIDEO or PICTURE FILES to view the list of copied
items. Select the file and press ENTER to play/view it.
Copying from a CD: Insert a CD in the drive, the player will automatically open the DISC section of the MAIN MENU. Open
AUDIO/VIDEO or PICTURE FILE to view the list of item to copy. Select the file(s) to be copies by pressing MARK on your remote.
When you have finished selecting the file(s), press ENTER. Copy will start immediately. Go to the HARD DISK section, select
either AUDIO/VIDEO or PICTURE FILES to view the list of copied items. Select the file and press ENTER to play/view it.
Deleting: Press MENU on your remote, go to HARD DISK and select either AUDIO/VIDEO or PICTURE FILES. Pick the file(s) to
delete by pressing MARK, then press DELETE. The selected file(s) will be immediately deleted. To delete the entire Hard Disk, go
to HARD DISK OPTIONS and select FORMAT HARD DISK.
Setting up the FTP on the player
Press SETUP on your remote and go to ETHERNET - TCP/IP. Select FTP-Sever. You have three options: DISABLED (Not available),
READ ONLY (You can copy files from the VR-558 to your PC, but cannot copy files from your PC to the VR-558), READ/WRITE
(You can copy files from the VR-558 to your PC and from your PC to the VR-558). Pick the one that suits you best. Go to SHOW
CURRENT TCP/IP SETTINGS. Write down the IP ADDRESS shown on the screen below for future use. It is 4 sets of characters
separated by a point. (ex: 192.168.6.25). On your computer open your Internet Browser Program, in the address field write: ftp://
Disk. If you already have copied some files on your Hard Disk, you will find three folders named: AUDIO, VIDEO and PICTURES.
They contain your Hard Disk's files, you can drag and drop them on your PC. The PVR folder contain your recordings. If you haven't
used your Hard Disk yet, the AUDIO, VIDEO and PICTURES folders haven't been created yet. You can create them yourself, but
make sure that you have previously selected READ/WRITE on your player, and for your player to see them these folders should be
named exactly audio, video and pictures (in low case letters). You also must copy your audio files into the AUDIO folder and so on.
The VR-558 will not be able to recognise them otherwise. Now that the FTP is set, you can manage all the files from the VR-558
easily and directly from your PC, you can rename your recordings, copy them to your PC's Hard Disk and burn them onto CD.
Your KiSS VR-558 IP Address:
- Only computer generated files can be copied onto the hard disk. DVDs, audio CDs, VCDs and SVCDs can not be copied
- The FTP access only works if the KiSS Player and the PC are connected on the same network via the Ethernet Port. Check the PC TO DVD CONNECTION chapter of this manual if you are unsure.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Playing media
10
This product supports the following media: DVD, MPEG-4, DivX, Nero Digital, XviD, Audio CDs, MP3, Ogg Vorbis and Jpeg file formats.
Playing DVDs
Press the EJECT button on the front of the player or on the remote to open the drawer. Place the DVD in it to start it automatically.
After a few seconds the DVD menu will appear. You can naviguate it using the arrows, then press ENTER to access the selected
menu. When a DVD is already in place in the VR-558, you can start it by pressing MENU on your remote, then go to DISC and
select PLAY DISC. EJECT is also available from this section. Another way of starting a DVD when there is already one in the tray
is to press LIST to get all the options available. Just select PLAY DISC.
Playing MPEG-4, DivX, Nero Digital, XviD
Press EJECT to open the drawer and place a CD with video content in. Press EJECT again to close the drawer. After a few
seconds, the menu DISC will appear on your screen. Select VIDEO FILES to view the list of video content from the CD, choose
the one you want to watch and press ENTER. You can, at anytime during playback, choose to REPEAT the file, SHUFFLE the CD
content or do a TIME SEARCH on the video currently watched by pressing LIST on your remote and ENTER to select the chosen
option. To eject the CD, press STOP to go out of the menu and come back to the DISC section. Choose EJECT.
Playing Audio CDs, MP3, Ogg Vorbis
113 Hrs free
Mon 01 Nov 2004 12:00
0 Scheduled Recordings
Main Menu
To play and MP3 CD, press EJECT to open the drawer and place a CD with the music content in. Press EJECT again to close the
drawer. After a few seconds, the menu DISC will appear on your screen. Select AUDIO FILES to view the list of audio files or
folders available from the CD, choose the one you want to listen to and press ENTER. You can, at anytime during playback, choose
to REPEAT the file or SHUFFLE the CD content by pressing LIST on your remote and ENTER to select the chosen option. To eject
the CD, press STOP to go out of the menu and come back to the DISC section. Choose EJECT.
Disc
Play Disc
Audio Files
Video Files
Picture Files
Eject
Audio CDs start to play automatically when loaded. If the player is connected to the Internet, the VR-558 will search for the CD
track names and will display them. When you are done, just press EJECT on the remote to remove the CD from the drive.
Explore CD-ROM/DVD-ROM content: View audio files only.
Viewing Jpeg pictures
Press EJECT to open the drawer and place a CD with picture content in. Press EJECT again to close the drawer. After a few
seconds, the menu DISC will appear on your screen. Select PICTURE FILES to view the list of images on the CD, choose the one
you want to watch and press ENTER. Use the NEXT/PREVIOUS arrow to view other pictures from the CD. You can enlarge the
picture by pressing ZOOM on your remote. To eject the CD, press STOP to go out of the menu and come back to the DISC section.
Choose EJECT.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
KiSS PC-Link
11
KiSS PC-Link is the software provided with your VR-558. Once the connection established between your VR-558 and your PC, load your Audio, Video and Picture content located on your
PC to KiSS PC-Link to play/see them on your television.
KiSS PC-Link
KiSS PC-Link is a software to be installed on a Windows PC enabling you to view and play audio, video and picture files from a
connected PC on the DVD Player. KiSS PC-Link can only be installed on a Windows PC running Windows XP or later.
Installing KiSS PC-Link: Insert the KiSS PC-Link CD in your PC. The installation software will start automatically. Follow
the on-screen instructions until installation is complete. A shortcut will be created on your desktop. Double click it to start the
program.
Network settings
In order for PC-Link to work, your PC must be connected to your DVD Player by the ethernet connection found at the back of
the player. Please refer to the PC TO DVD CONNECTION chapter of this manual for extra help. To valid the connection, you can
either press MENU on your remote, go to PC-LINK, select ENTER IP ADDRESS OF PC-LINK HOST and enter the IP address found
in the info tab of KiSS PC-Link, or you can press MENU on your remote, go to PC-LINK, select SEARCH FOR PC-LINK HOSTS and
pick your server from the list of available servers.
Accessing your files
Once the connection has been validated, start KiSS PC-Link. The program is divided into Video, Audio and Picture files. Load the
files to be shared by clicking ADD or SEARCH if you want the software to look for the files itself. Do not quit KiSS PC-Link, it
must stay on on your PC for sharing to happen. Once this is done, press MENU on your remote, go to PC-LINK and choose AUDIO,
VIDEO or PICTURE FILES. The files shared on your PC are now available to be played or copied on your Player. You can copy a
whole folder to KiSS PC-Link by dragging it on the software's window on your PC.
KiSS KML Start Page
The VR-558 can access any KiSS enabled web page (web pages that uses KML) on the entire internet. This way it is possible to
go to 3rd party webpages not created by KiSS. This could be news services, games, radio stations or other. To do so, you have
to know the so-called IP address of the page you want to visit (4 numbers separated by dots). These IP Addresses can be found
on the Internet. When you have an IP Address of a KML page press MENU on your remote, go to PC-LINK and select ENTER IP
ADDRESS FOR PC-LINK HOST. Enter the IP Address and press OK. Then go to PC-LINK KML START PAGE to view the web page.If
you get an error message while going to PC-LINK KML START PAGE, that means that the IP Adress you provided does not contain
anything a KiSS Player can display. This feature is for future use.
- KiSS PC-Link can only be used on a Windows PC running at least Windows XP.
- If you are a Mac user and running at least Mac OS X 10.2, you can download KiSS MacLink from our website as an alternative to KiSS PC-Link.
- If you have a network of PCs running KiSS PC-Link, they can be selected from your player by selecting SEARCH FOR PC-LINK HOST
Download from Www.Somanuals.com. All Manuals Search And Download.
18
KiSS Online
12
If you are connected to Broadband Internet (see PC TO DVD CONNECTION), you will be able to access KiSS Online Services. Just press ONLINE on your remote or go to MENU, then select
ONLINE KML SERVICES and choose among the list which service you would like to use.
WebRadio 3
This service provide you with a wide range of Internet Radio Stations. Just press ONLINE on your remote and choose WEBRADIO
3 to access the portal. You can also access by pressing MENU on your remote, then go to ONLINE KML SERVICES and go to KiSS
WEBRADIO 3. Press STOP twice to exit.
Playing Internet Radio with WebRadio 3
Starting WebRadio 3, you can choose between listening to MUSIC BY GENRE or by country with WORLD RADIO. Press ENTER
to choose MUSIC BY GENRE and view the list of categories on your left hand side. You can see the number of radio stations
available per genre on the right hand side. Scroll down and select one to view a more narrow category, you can then view the
radio available. Scroll down and choose one to listen to. The connection start and the music plays. If you choose WORLD RADIO,
you will go to the list of continents, choose one to go to the list of countries/list of all radios. You can now either start listening
to a radio station or select COUNTRIES to view a choice of specific countries or cities.
KiSS TV Guide (EPG)
KiSS TV Guide or EPG (Electronic Program Guide) is one of KiSS' Online Services enabling you to view what program is coming
to your television. For this service to run, you need to be connected to a Broadband Internet Connection. You can then view all
the program available to you in your country, you can register your favorites channels, view film information and set them to
record from the TV Guide. This service can be accessed by pressing MENU on your remote, then go to ONLINE KML SERVICES
and select KISS TV GUIDE (EPG). You can also access it by pressing ONLINE on your remote and choosing TV GUIDE. Press STOP
twice to exit.
Managing your Channels
If you are using the TV Guide for the first time, you need to set the channels available from your television as Favorites. To do so
you need to "map" (register) your TV Channels. Mapping adds automatically your channels to the favorites. Go to the TELEVISION
FUNCTION Chapter to learn how to do it. If you want to add them manually, go to KiSS TV GUIDE, and select ADD A FAVORITE in
the FAVORITE STATIONS section. Select your country to view the list of available channels, pick the ones you receive on your TV
and press ADD FAVORITE. Repeat this operation for all your channels. Remember that your channels need to be mapped before
scheduling a recording through the EPG. Press STOP twice to exit.
- To use any of these features, you need to be connected to a Broadband Internet Connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
What's on TV?
Now that your favorites have been added, select WHAT'S ON NOW in the FAVORITE STATIONS section to view a timeline
selection of your favorite channels for the next two hours. You can navigate through the channels with the ARROWS and
press ENTER to get more information about the program. If you select WHAT'S ON, you have access to timed selections of the
Channel's program. Just choose what part of the day you are interrested in to view the what is coming up. You also have the
choice to view the program for tomorrow and the next 5 days.
Favorites Shows, Movies and Sport
TV Shows can also be set as Favorites, go to ADD A FAVORITE in the FAVORITE SHOWS section and type the name of the show
using your remote's keypad. A list of the show appears on your screen. Select ADD FAVORITE at the bottom of your screen and
this show will be marked in red when you view TV programs. Go to WHAT'S ON in this section if you need to see when your
favorite show is coming next. You can also check the upcoming movies and sport events for my favorite channels by going in the
relating sections and selecting WHAT'S ON. If you need extra film info, just go to the movie section and select IMBD (Internet
Movie DataBase). It will enable you to enter a film name with the keypad and view its details.
Recording through KiSS TV Guide
Before starting, select CONFIGURATION and make sure the timezone entered by default is the correct one. You can also set
how many minutes you want to be recorded before and after the program's time. Sometimes TV Channels are not so precise
with program times. Go to WHAT'S ON in the FAVORITE STATIONS section and select the time section then the program to
record by choosing it with the ARROWS and selecting it with the ENTER button. You can now see some short details about the
program. If the program is a movie, you can get some more details by selecting IMDB (Internet Movie DataBase) at the bottom
of your screen. To set the schedule, select RECORD at the bottom of your screen. You will be asked to confirm the recording.
The schedule is set. If you need to verify, edit or delete the schedule, go to MENU, then VIDEO RECORDER FUNCTIONS and
RECORDING SCHEDULE. Remember that the channel needs to be mapped to record through the EPG and that the player must
be on standby mode.
Weather Online
Check the weather in your area as well as anywhere in the world. Weather Online gives you a 5 days weather forcast with
temperatures in Degree Celcius and Degree Fahrenheit as well as satellite photos and detailed weather graphics.
To access this service, go to MENU, the go to ONLINE KML SERVICES, select KiSS ONLINE and choose WEATHER. You can also
access it by pressing ONLINE on your remote and choosing WEATHER. Press STOP twice to exit.
Configuring and checking the weather
To get started you need to register some favorites. These will be shortcuts to the places you will check often. Choose a continent
with the ARROWS, then select it by pressing ENTER on your remote. Choose a city from the list and select it. You can now see its
weather details and 5 days forcast. Select SATELLITE to view a satellite picture of the area or FORCAST to view detailed weather
graphic of the area. Select ADD FAVORITE, and this city will be in FAVORITE when Weather Online starts.
- To use any of these features, you need to be connected to a Broadband Internet Connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
KiSS Online Games
Games can be played from the Online Portal. To access this service, go to MENU, the go to ONLINE KML SERVICES, select KiSS
ONLINE and choose GAMES. You can also access it by pressing ONLINE on your remote and choosing GAMES. To get started,
set yourself a player's name. Select SET NICKNAME and enter a name with the keypad. Then choose the game you want to play
with the ARROWS and select it with the ENTER button of your remote.
Klondike
Game of cards. You need to have all your cards in order from 1 to King and by sign. Use the ARROWS from the remote to choose
the card you want to move. Press ENTER to validate it. The card to be moved is marked by a yellow square while searching for the
place to move it to is marked by a red cursor. Just press ENTER to select the place to move it to. Go to the bottom of the screen
and select NEW to start a new game. Select SCORES to view the scores of other online players.
Minesweeper
Find the hidden mines without hitting them. Start a game by selecting NEW at the bottom of your screen. Choose the level of
game you wish to play. Use the numbers from the keypad to select first a row, then a column. If the number 1 appears in the
square you have selected, it means there is 1 mine in the surrounding squares, if the number 2 appears, there are 2 mines and
so on. If no number appear, there are no mines all the surrounding empty squares will be discovered. When you think you know
where a mine is hidden, press 0, then select the row and the column. This square is now marked. Proceed the same way to
unmark a square. Your score is displayed on the right side of the screen along with the details of the current game: total number
of squares, number of mines to discover and time spent.
Reversi
You must own more pieces than your opponent at the end of the game. The game is over when neither player has a move, this
usually happens when the bord is full. Start a new game by selecting NEW. Write a name and choose if you want to play as a
SINGLE USER's game or a MULTI USER's game. Multi user's game only work if there are other players online. To play, select a
row then a column where you wish to place your piece. The selection of the row and the column is done with the numbers from
your remote's keypad. The name of the players is displayed on the right side of the screen as well as your score and the total
number of games played.
Checkers
The game is won when you have taken all the opponent's pieces. To start a game, select NEW at the bottom of your screen.
Enter your name and choose the kind of game to play: BRITISH, SINGLE INTERNATIONAL or MULTI INTERNATIONAL. Multi user's
games only work if there are other players online. Select RULES to view the details. To move a piece, select its source's row
and column with the numbers of the remote's keypad, then select its destination's row and column. The name of the players is
displayed on the right side of the screen as well as your score and the rule of the current game.
- To use any of these features, you need to be connected to a Broadband Internet Connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
KiSS Remote EPG
13
Introduction to the KiSS Web Services: KiSS Remote EPG: http://epg.kml.kiss-technology.com
What is KiSS Web Services: TV Guide?
Our new web-based TV Guide is a companion service to our existing TV Guide currently running on the VR-558. Its main purpose
is to act as a means to remotely schedule recordings from any location with a browser and an Internet connection. Over are the
days where you had to sit in front of your digital recorder to schedule recordings of your favorite shows. Sitting in the office and
realize that you can’t make it home in time to catch the news or your favorite show? Log on to the TV Guide from your computer,
WiFi-enabled PDA or GPRS and browser-enabled phone, and schedule it for recording in seconds.
What is needed to take advantage of the web-based TV Guide?
Provided that your VR-558 is already on a permanent connection to the Internet (dial-up connections are not guaranteed to work
with this service), all you need is to install the latest firmware on your VR-558. Once done, follow these three procedures and
you’re ready to schedule recordings via the Internet.
1. Enter the Main Menu of the VR-558, go to the Online Services menu and press “Reveal Player ID.” Write this down exactly
as you see it.
2. Enter the Setup Menu on the VR-558, and enable the Web Schedule option in Network Options.
3. Log on to the TV Guide on the VR-558, enter the Configure page at the bottom of the TV Guide main page and select Set
Password. Enter the password you want to use when you log on to the web-based TV Guide.
Enter your unique Player ID and the password you just entered on your VR-558.
If the above instructions have been followed correctly, you should now see the main menu.
For safety and convenience, we recommend that you press [Link email] at top of the main menu. This will enable you to pair an
email address with your Player ID, so you don’t have to memorize it or keep it with you. After all, an email address is far easier
to remember. Once you’ve done this, you can just enter your email address in the login field every time you need to log on to
the service. You still need to remember your password, though.
Using KiSS Web Services: TV Guide
If you’ve familiarized yourself with the TV Guide on the recorder, you’ll find that the web-based TV Guide works in almost exactly the same way with a few minor changes and additions
to make better use of the web medium.
The first thing you’ll notice is that the login screen has three buttons to accommodate different devices and browser qualifications. Desktop mode is what you should use on your PC and
MAC. The Mobile version of the site is specially designed for small, but advanced devices like smartphones and PDAs with advanced web browsers built in. The Text version is for devices
offering very basic web browsing functionality.
Since the web-based TV Guide is meant to be a companion service to the TV Guide on the recorder, it’s set up to mirror all your settings. You will notice that all your favorite channels and
shows set up using your VR-558 are already available to you on the web-based version. There’s no need to configure it again.
Entering the grid view of the TV Guide (“What’s on now”) in Desktop mode, the biggest change you will notice is that the axis has shifted. Since the desktop has a lot more space to offer,
we’ve sought to provide more space for time on the vertical axis.
The interface has buttons for the functions you would normally use your remote control for.
Click the left/right arrows at the top of the page to move between additional pages of channels.
Click the up/down arrows in the bottom/top left hand side of the grid to see programs running earlier or later in the day.
The “Favorites” button takes you to the list of your favorite channels.
The “What’s On” button allows you to see what’s on during specific times of the current day or the next 6 days.
The tabs at the top of each page allow quicker navigation of the site without returning to the main menu (though it can always be reached from the bottom of each page).
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Scheduling a show for recording
Simply click on the show you wish to record for full information on the program. From this screen, press the record button at
the bottom of the page. This will bring you to the schedule view, where you can monitor what shows you have scheduled for
recording. Your recording will be added to the list of recordings waiting to be sent to the player. Every 15 minutes the scheduled
recordings will be picked up by your VR-558 at home and the items on the list will be moved to the list just above it showing
recordings already sent to the player. This way you can keep track of what your VR-558 is doing. Refresh the page for an updated
view, or visit it at any time from the main page.
The shows you schedule for recording will also show up in red in the web-based TV Guide, just like they do in the TV Guide on
the VR-558.
NOTE: Your VR-558 needs to be in standby-mode in order to record scheduled shows.
All done?
When done browsing the TV Guide or upon leaving your computer, we recommend you log out of the service using the “Log
Out” button at the bottom of the page, so nobody else will be able to access your recording schedule. The session will also
automatically time out and log you out after 30 minutes of inactivity.
Troubleshooting
A: - You need the latest firmware (1.1.2 or better) in your VR-558 to access the service. Download the firmware from our website, where you will also find information on how to burn and
install the firmware.
- Make sure you’ve followed the setup instructions from the section “What is needed to take advantage of the web-based TV Guide?”
- Make sure you’ve typed in your Player ID correctly. Make sure you’ve not confused, for instance, zero’s with o’s or capital i’s with lowercase L’s.
- Make sure you’ve typed in your password correctly.
Q: Help! I’ve forgotten my password. What do I do now?
A: Access the TV Guide on your recorder, enter the Configure menu and change your password to a new one.
Q: I’ve scheduled a recording, but the recording was never sent to the player. It is still in the “Recordings to be sent to the player” list. What’s wrong?
A: Due to the schedule pickup interval, it may take up to 15 minutes before the scheduled recording shows up in the list of recordings sent to the player. If the scheduled recording has still
not been picked up after 15 minutes, check that your VR-558 is online and that you have enabled the Web Schedule option in the Network Options section of the Setup Menu.
Q: I’ve scheduled a recording, but when I look at the list of recordings sent to the player, it says “Error (EPG channel not mapped)”. What does this mean?
A: You have chosen to record a show from a channel not previously mapped on the VR-558. Like the TV Guide on the VR-558, the web-based TV Guide does not know what TV channels you
have tuned into your recorder. Therefore you will need to pair them up by mapping your tuned TV channels on the VR-558 to their respective counterparts in the TV Guide beforehand. This
can only be done on the VR-558. Go to the channel you want to map, press the LIST button on the remote until you get the menu item saying “Configure EPG ID.” Press the enter button on
this item, and you should be taken to the TV Guide where you can look for the correct channel name to map it to. You only need to do this once for every channel.
Q: My VR-558 picked up the scheduled recording just fine according to the status, but nothing was recorded when I checked it. What went wrong?
A: You will need to make sure that your VR-558 is set to standby mode. While the VR-558 will be able to pick up scheduled recording entries at any time, standby is the only state in which
it can actually start a scheduled recording, since there is no way the recorder can account for conflicting use of the hard disc while being turned on.
Q: I scheduled a program for recording a couple of minutes prior to it’s start and I know my player was in standby mode, but it didn’t record it or it missed the start of
the program. What’s wrong?
A: The recordings you schedule via the web-based TV Guide are picked up by the player with 15-minute intervals, so make sure you schedule a recording at least 15 minutes prior to the
program start to make sure your entire program is recorded.
Q: I want to record a show that is already running, will my VR-558 record it even though it has started?
A: Yes it will, but due to the schedule pickup interval, it may take up to 15 minutes before the VR-558 starts recording.
Q: I just scheduled a recording using the web-based TV Guide, but when I check the recording schedule on my VR-558, it is not in the list. Why is that?
A: Due to the schedule pickup interval, it may take up to 15 minutes before the scheduled recording shows up in the list on the VR-558. Be advised that the page does not refresh
automatically on the player, so you will need to re-enter it to see the updated list. If the scheduled recording still doesn’t appeare in the schedule list on the VR-558 after 15 minutes, check
that your VR-558 is online and make sure that you have enabled the Web Schedule option in the Network Options section of the Setup Menu.
Q: When I tried to record a show, I got an error message saying that there was a conflict between recordings. What does this mean?
A: The VR-558 can only record one show at a time.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Advanced functions
14
Some special functions and shortcuts to some of the main functions have been given to some of the remote buttons. Find below a list of them and their use.
Menu
Access the player's main menu
List
Gets file info and options
Setup
Access the advanced setup section of the Player
Mark
Select file(s) before copying or deleting
Audio
Change audio track on DVD playback
Title Menu
Goes to the root menu in DVD playback
Subtitle
Online
Changes the subtitles in DVD playback
Shortcut access to KiSS Online
Input
Zoom
Selects input source
Zoom in or out on pictures
TV
Store
Selects TV tuner mode
Not in use
HDD
Volume
Goes to Hard Disk Menu
Toggle the volume up or down.
- When using ZOOM, press the arrows from the remote to move around the enlarged screen display.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Updating the player
15
KiSS is always keen to update its products to make sure that the user takes advantage of new features or bug fixes. Updates are regularly posted on KiSS’ website in the support section.
When the “Firmware warning” option is activated in the “Misc. Settings” of the “Advanced setup”, a message will appear on the top right corner of your screen in the “Advanced Setup”
when a new firmware is available.
Getting the firmware
software. You can easily verify the firmware version running on your player by pressing "Setup". The number is situated on the
top right corner of the screen. If the firmware version from the Internet is newer, you should download it. Make sure you have
selected the firmware for the right player and the correct TV system. (PAL: Europe, Asia; NTSC: USA, Japan)
Burning the CD on PC
Once downloaded, the firmware file should decompress. Put a blank disc in your PC's drive. KiSS recommends Nero Burning
Rom v.6 to burn the firmware CD. Open Nero and select "Disc Image". Choose "All files" and select the firmware file. Choose the
lowest speed allowed by your burner, and press "next". The disc starts burning.
Burning the CD on Mac
Once downloaded, the firmware file should decompress and open. Put a blank disc in your Mac's drive. KiSS recommends Roxio
Toast to burn the firmware CD. Open Toast and select "Disc Image". Select the firmware file (file end in .iso). Press "Record" and
select the lowest burning speed allowed by your burner. The disc starts burning.
Installing the firmware
Turn the player on, and insert the firmware CD. Close the drive and restart the player. The firmware CD will boot. Wait until the
KiSS background appears on your TV. Choose between FULL UPDATE (updates everything) and PARTIAL UPDATE (Keeps your
default settings). KiSS recommands a full update. The CD will be ejected when the update is finished. Remove it, and restart the
player. The player is now updated and will start showing the Quick Setup.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Support
16
Further information and assistance is available at KiSS Technology’s website under End Terms of Warranty
User/Support/After-sales for DVD Player.
1. The warranty is only valid on presentation of the original sales receipt,
and if the serial number on the product is fully legible.
2. The obligations of KiSS are limited either to repair or replacement
of defective components. The repair or replacement of defective
components is based on an assessment by KiSS. Exchange is only
possible if the repair cannot be performed.
Resetting
To reset the settings of the VR-558, press the following buttons on the remote control:
“Open”, “Clear”, “1”, “2”, “3”. KiSS Technology A/S reserves the right to change all 3. Warranty repairs must be carried out by an authorised KiSS dealer, or
settings and specifications without notice.
an authorised service centre. No remuneration is provided for repairs
performed by unauthorised workshops. Any repairs or damage to the
product caused by unauthorised intervention are not covered by this
warranty.
Important safety information
4. This product will not be considered as being defective, either in
materials or in manufacture, if adaptation to national, local, technical
or safety-related requirements is required in countries other than the
specific country for which the product was originally designed and
manufactured.
5. This warranty does not cover these types of adaptations, and no
remuneration will be offered for these types of adaptations or for any
consequential damages. The warranty does not cover the following:
a) Periodic inspection, maintenance and repair or replacement of parts
resulting from normal wear.
•
•
•
Read these instructions carefully and pay attention to all warnings and
guidelines.
Do not overload electrical sockets or extension cables.
Overloading can result in fire or electric shock.
Never insert objects into the DVD player’s cabinet door. They might
come into contact with dangerous voltage points or short-circuit
components, which can cause fire or electric shock.
Do not spill liquids on the DVD player.
If the DVD Player does not function normally, or if it emits
unusual sounds or odours, pull out the plug immediately and contact an
authorised technician.
•
•
b) Costs connected to transport, disassembly or installation of the
product.
•
Do not attempt to service the DVD player yourself. If you open or
dismantle the shielding, you expose yourself to dangerous voltage and
other hazards. All maintenance must be carried out by qualified service
technicians.
c) Misuse, including use for purposes other than was intended, or
faulty installation.
d) Damage caused by lightning, water, fire, natural catastrophes,
war, insurrection, incorrect line voltage, insufficient ventilation
or other causes outside the control of KiSS.
6. This warranty applies to every legal owner of the product during the
warranty period.
Environmental information
• The system is made of recyclable materials which can be reused if
disassembled by authorised personnel.
Packaging
• Please follow local regulations for the disposal of packaging
materials, used batteries and discarded units.
If possible, use the original packing material for any shipping. Otherwise, repack the VR-
558 using:
•
A reinforced cardboard box, strong enough to carry the weight of the
product.
Copyright
•
At least 6 cm / 2.36 inches of shock-absorbing material around the
product.
This product contains copyright technology which is protected pursuant to the patents
that are the property of Macrovision Corporation and other copyright holders. Any use of
this copyright technology must be approved by Macrovision Corporation. The technology
is intended for use in the home unless otherwise approved by Macrovision Corporation.
Breakdown and disassembly are prohibited.
•
•
•
Non-abrasive, dust-free material for the other parts.
Non-abrasive wrapping for the product. (Dust and dirt cover)
Repack the product in such a way as to ensure that it cannot shift in
the box during transport.
Made under license from Dolby Laboratories. “Dolby” and the double “D” symbol are
trademarks of Dolby Laboratories. “DTS” and “DTS Digital Out” are trademarks of Digital
Theater Systems, Inc.
•
No other alternative will be accepted
Information we must receive before repairing the product:
Model name: KiSS DVD Player VR-558
Serial no.:
Warranty certificate
Fault description (www.kiss-technology.com/rma):
Copy of the invoice or sales receipt
KiSS provides a twenty-four (24) month warranty from the date of purchase against The dealer’s name, address and phone no.
material and manufacturing defects. For defects covered by the warranty, the product must Personal information: Name, address, post code/city, phone no. and e-mail address
be returned to the dealer that sold the product.
(optional).
Your signature
Dealer’s stamp and signature
Date
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Contacting KiSS
17
For questions or problems with your product, KiSS provides an international customer service. Telephone calls or e-mails can be addressed in English, French, German, Spanish, Italian,
Danish, Swedish and Norwegian
KiSS Technology A/S
Slotsmarken 10
DK-2970 Hørsholm
Denmark
Hotline (user support)
Monday to Friday
9.00-1800 (CET)
Please check KiSS web site under support
to view Hotline’s telephone number
- Some features and information in this manual may differ slightly from the product itself due to firmware versions and changes made after printing
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal Information
18
GNU GENERAL PUBLIC LICENSE
Activities other than copying, distribution and modification are not covered by this License;
they are outside its scope. The act of running the Program is not restricted, and the output
from the Program is covered only if its contents constitute a work based on the Program
(independent of having been made by running the Program). Whether that is true depends
on what the Program does.
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but 1. You may copy and distribute verbatim copies of the Program’s source code as you
changing it is not allowed.
receive it, in any medium, provided that you conspicuously and appropriately publish on
each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty; and give any other
recipients of the Program a copy of this License along with the Program. You may charge
a fee for the physical act of transferring a copy, and you may at your option offer warranty
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change protection in exchange for a fee.
it. By contrast, the GNU General Public License is intended to guarantee your freedom
to share and change free software--to make sure the software is free for all its users. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a
This General Public License applies to most of the Free Software Foundation’s software work based on the Program, and copy and distribute such modifications or work under the
and to any other program whose authors commit to using it. (Some other Free Software terms of Section 1 above, provided that you also meet all of these conditions:
Foundation software is covered by the GNU Library General Public License instead.) You
can apply it to your programs, too.
a) You must cause the modified files to carry prominent notices stating that you
changed the files and the date of any change.
When we speak of free software, we are referring to freedom, not price. Our General
Public Licenses are designed to make sure that you have the freedom to distribute copies
of free software (and charge for this service if you wish), that you receive source code or
can get it if you want it, that you can change the software or use pieces of it in new free
programs; and that you know you can do these things.
b) You must cause any work that you distribute or publish, that in whole or in
part contains or is derived from the Program or any part thereof, to be
licensed as a whole at no charge to all third parties under the terms of
this License.
To protect your rights, we need to make restrictions that forbid anyone to deny you
these rights or to ask you to surrender the rights. These restrictions translate to certain
responsibilities for you if you distribute copies of the software, or if you modify it. For
example, if you distribute copies of such a program, whether gratis or for a fee, you must
give the recipients all the rights that you have. You must make sure that they, too, receive
or can get the source code. And you must show them these terms so they know their
rights.
c) If the modified program normally reads commands interactively when run,
you must cause it, when started running for such interactive use in the most
ordinary way, to print or display an announcement including an appropriate
copyright notice and a notice that there is no warranty (or else, saying that
you provide a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this License.
(Exception: if the Program itself is interactive but does not normally print
such an announcement, your work based on the Program is not required to
print an announcement.)
We protect your rights with two steps: (1) copyright the software, and (2) offer you this
license which gives you legal permission to copy, distribute and/or modify the software.
These requirements apply to the modified work as a whole. If identifiable sections of that
Also, for each author’s protection and ours, we want to make certain that everyone work are not derived from the Program, and can be reasonably considered independent
understands that there is no warranty for this free software. If the software is modified and separate works in themselves, then this License, and its terms, do not apply to those
by someone else and passed on, we want its recipients to know that what they have is sections when you distribute them as separate works. But when you distribute the same
not the original, so that any problems introduced by others will not reflect on the original sections as part of a whole which is a work based on the Program, the distribution of the
authors’ reputations.
whole must be on the terms of this License, whose permissions for other licensees extend
to the entire whole, and thus to each and every part regardless of who wrote it.
Finally, any free program is threatened constantly by software patents. We wish to avoid
the danger that redistributors of a free program will individually obtain patent licenses, Thus, it is not the intent of this section to claim rights or contest your rights to work written
in effect making the program proprietary. To prevent this, we have made it clear that any entirely by you; rather, the intent is to exercise the right to control the distribution of
patent must be licensed for everyone’s free use or not licensed at all.
derivative or collective works based on the Program.
The precise terms and conditions for copying, distribution and modification follow.
In addition, mere aggregation of another work not based on the Program with the Program
(or with a work based on the Program) on a volume of a storage or distribution medium does
not bring the other work under the scope of this License.
GNU GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION
AND MODIFICATION
3. You may copy and distribute the Program (or a work based on it, under Section 2) in
object code or executable form under the terms of Sections 1 and 2 above provided that
0. This License applies to any program or other work which contains a notice placed by you also do one of the following:
the copyright holder saying it may be distributed under the terms of this General Public
License. The “Program”, below, refers to any such program or work, and a “work based
on the Program” means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter, translation is included
without limitation in the term “modification”.) Each licensee is addressed as “you”.
a) Accompany it with the complete corresponding machine-readable source
code, which must be distributed under the terms of Sections 1 and 2 above
on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give
any third party, for a charge no more than your cost of physically performing
Download from Www.Somanuals.com. All Manuals Search And Download.
172
source distribution, a complete machine-readable copy of the corresponding
source code, to be distributed under the terms of Sections 1 and 2 above on
a medium customarily used for software interchange; or,
9. The Free Software Foundation may publish revised and/or new versions of the General
Public License from time to time. Such new versions will be similar in spirit to the present
version, but may differ in detail to address new problems or concerns.
c) Accompany it with the information you received as to the offer to distribute
corresponding source code. (This alternative is allowed only for non-
commercial distribution and only if you received the program in object code
or executable form with such an offer, in accord with Subsection b above.)
Each version is given a distinguishing version number. If the Program specifies a version
number of this License which applies to it and “any later version”, you have the option of
following the terms and conditions either of that version or of any later version published
by the Free Software Foundation. If the Program does not specify a version number of this
License, you may choose any version ever published by the Free Software Foundation.
The source code for a work means the preferred form of the work for making modifications
to it. For an executable work, complete source code means all the source code for all 10. If you wish to incorporate parts of the Program into other free programs whose
modules it contains, plus any associated interface definition files, plus the scripts used to distribution conditions are different, write to the author to ask for permission. For
control compilation and installation of the executable. However, as a special exception, software which is copyrighted by the Free Software Foundation, write to the Free Software
the source code distributed need not include anything that is normally distributed (in either Foundation; we sometimes make exceptions for this. Our decision will be guided by the two
source or binary form) with the major components (compiler, kernel, and so on) of the goals of preserving the free status of all derivatives of our free software and of promoting
operating system on which the executable runs, unless that component itself accompanies the sharing and reuse of software generally.
the executable.
If distribution of executable or object code is made by offering access to copy from a NO WARRANTY
designated place, then offering equivalent access to copy the source code from the same
place counts as distribution of the source code, even though third parties are not compelled 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
to copy the source along with the object code.
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT
WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER
4. You may not copy, modify, sublicense, or distribute the Program except as expressly PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER
provided under this License. Any attempt otherwise to copy, modify, sublicense or EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
distribute the Program is void, and will automatically terminate your rights under this OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
License. However, parties who have received copies, or rights, from you under this License TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
will not have their licenses terminated so long as such parties remain in full compliance.
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
5. You are not required to accept this License, since you have not signed it. However,
nothing else grants you permission to modify or distribute the Program or its derivative 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
works. These actions are prohibited by law if you do not accept this License. Therefore, by WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
modifying or distributing the Program (or any work based on the Program), you indicate your REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
acceptance of this License to do so, and all its terms and conditions for copying, distributing INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES
or modifying the Program or works based on it.
ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT
NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES
SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE
6. Each time you redistribute the Program (or any work based on the Program), the
recipient automatically receives a license from the original licensor to copy, distribute or WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
modify the Program subject to these terms and conditions. You may not impose any further ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
restrictions on the recipients’ exercise of the rights granted herein. You are not responsible
for enforcing compliance by third parties to this License.
END OF TERMS AND CONDITIONS
7. If, as a consequence of a court judgment or allegation of patent infringement or for
any other reason (not limited to patent issues), conditions are imposed on you (whether by
court order, agreement or otherwise) that contradict the conditions of this License, they do How to Apply These Terms to Your New Programs
not excuse you from the conditions of this License. If you cannot distribute so as to satisfy
simultaneously your obligations under this License and any other pertinent obligations, If you develop a new program, and you want it to be of the greatest possible use to
then as a consequence you may not distribute the Program at all. For example, if a patent the public, the best way to achieve this is to make it free software which everyone can
license would not permit royalty-free redistribution of the Program by all those who receive redistribute and change under these terms. To do so, attach the following notices to the
copies directly or indirectly through you, then the only way you could satisfy both it and this program. It is safest to attach them to the start of each source file to most effectively
License would be to refrain entirely from distribution of the Program.
convey the exclusion of warranty; and each file should have at least the “copyright” line
and a pointer to where the full notice is found.
If any portion of this section is held invalid or unenforceable under any particular
circumstance, the balance of the section is intended to apply and the section as a whole is
intended to apply in other circumstances.
<one line to give the program’s name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
It is not the purpose of this section to induce you to infringe any patents or other property This program is free software; you can redistribute it and/or modify it under the terms of the
right claims or to contest validity of any such claims; this section has the sole purpose of GNU General Public License as published by the Free Software Foundation; either version
protecting the integrity of the free software distribution system, which is implemented by 2 of the License, or (at your option) any later version.
public license practices. Many people have made generous contributions to the wide range
of software distributed through that system in reliance on consistent application of that This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
system; it is up to the author/donor to decide if he or she is willing to distribute software without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of
the rest of this License.
PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this
program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
8. If the distribution and/or use of the Program is restricted in certain countries either by Boston, MA 02111-1307 USA
patents or by copyrighted interfaces, the original copyright holder who places the Program
under this License may add an explicit geographical distribution limitation excluding those Also add information on how to contact you by electronic and paper mail. If the program is
countries, so that distribution is permitted only in or among countries not thus excluded. In interactive, make it output a short notice like this when it starts in an interactive mode:
such case, this License incorporates the limitation as if written in the body of this License.
Download from Www.Somanuals.com. All Manuals Search And Download.
173
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w’.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
This is free software, and you are welcome to redistribute it under certain conditions; type IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
`show c’ for details. ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE
The hypothetical commands `show w’ and `show c’ should show the appropriate parts of FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
the General Public License. Of course, the commands you use may be called something DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
other than `show w’ and `show c’; they could even be mouse-clicks or menu items-- OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
whatever suits your program.
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
You should also get your employer (if you work as a programmer) or your school, if any, USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
to sign a “copyright disclaimer” for the program, if necessary. Here is a sample; alter the
names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision’ (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
LIBHTTP LICENSE
Copyright (c) 2000-2004 Dag-Erling Sm=F8rgrav
All rights reserved.
This General Public License does not permit incorporating your program into proprietary
programs. If your program is a subroutine library, you may consider it more useful to permit Redistribution and use in source and binary forms, with or without modification, are
linking proprietary applications with the library. If this is what you want to do, use the GNU permitted provided that the following conditions are met:
Library General Public License instead of this License.
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer in this position and unchanged.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
EXPAT LICENSE
3. The name of the author may not be used to endorse or promote products derived from
Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper. this software without specific prior written permission.
Copyright (c) 2001, 2002, 2003 Expat maintainers.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS’’ AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
Permission is hereby granted, free of charge, to any person obtaining a copy of this MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
software and associated documentation files (the “Software”), to deal in the Software
without restriction, including without limitation the rights to use, copy, modify, merge, IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
whom the Software is furnished to do so, subject to the following conditions:
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
The above copyright notice and this permission notice shall be included in all copies or LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
substantial portions of the Software.
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, The following copyright applies to the base64 code:
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
Copyright 1997 Massachusetts Institute of Technology
IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, Permission to use, copy, modify, and distribute this software and its documentation for any
DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR purpose and without fee is hereby granted, provided that both the above copyright notice
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE and this permission notice appear in all copies, that both the above copyright notice and
USE OR OTHER DEALINGS IN THE SOFTWARE.
this permission notice appear in all supporting documentation, and that the name of M.I.T.
not be used in advertising or publicity pertaining to distribution of the software without
specific, written prior permission. M.I.T. makes no representations about the suitability of
this software for any purpose. It is provided “as is” without express or implied warranty.
FLAC LICENSE
Copyright (C) 2000,2001,2002,2003,2004,2005 Josh Coalson
THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS’’. M.I.T. DISCLAIMS ALL EXPRESS OR
Redistribution and use in source and binary forms, with or without modification, are IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING, BUT NOT LIMITED
permitted provided that the following conditions are met:
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. IN NO EVENT SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- Redistributions of source code must retain the above copyright notice, this list of SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
conditions and the following disclaimer.
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
- Redistributions in binary form must reproduce the above copyright notice, this list of LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
conditions and the following disclaimer in the documentation and/or other materials OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
provided with the distribution.
ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior
written permission.
Download from Www.Somanuals.com. All Manuals Search And Download.
174
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
LIBJPEG LICENSE
This software is based in part on the work of the Independent JPEG Group.
This product includes cryptographic software written by Eric Young ([email protected]).
This product includes software written by Tim Hudson ([email protected]).
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
LIBGIF LICENSE
This package is an SSL implementation written by Eric Young ([email protected]).
The implementation was written so as to conform with Netscapes SSL.
The GIFLIB distribution is Copyright (c) 1997 Eric S. Raymond
Permission is hereby granted, free of charge, to any person obtaining a copy of this This library is free for commercial and non-commercial use as long as the following
software and associated documentation files (the “Software”), to deal in the Software conditions are aheared to. The following conditions apply to all code found in this
without restriction, including without limitation the rights to use, copy, modify, merge, distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL
publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to documentation included with this distribution is covered by the same copyright terms
whom the Software is furnished to do so, subject to the following conditions:
except that the holder is Tim Hudson ([email protected]).
The above copyright notice and this permission notice shall be included in all copies or Copyright remains Eric Young’s, and as such any Copyright notices in the code are not to be
substantial portions of the Software.
removed. If this package is used in a product, Eric Young should be given attribution as the
author of the parts of the library used.
THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
This can be in the form of a textual message at program startup or in documentation
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL (online or textual) provided with the package.
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, Redistribution and use in source and binary forms, with or without modification, are
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN permitted provided that the following conditions are met:
THE SOFTWARE.
1. Redistributions of source code must retain the copyright notice, this list of conditions
and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
OPENSSL LICENSE
Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved.
3. All advertising materials mentioning features or use of this software must display the
following acknowledgement: “This product includes cryptographic software written by Eric
Young ([email protected])” The word ‘cryptographic’ can be left out if the rouines from the
Redistribution and use in source and binary forms, with or without modification, are library being used are not cryptographic related :-).
permitted provided that the following conditions are met:
4. If you include any Windows specific code (or a derivative thereof) from the apps directory
1. Redistributions of source code must retain the above copyright notice, this list of (application code) you must include an acknowledgement: “This product includes software
conditions and the following disclaimer.
written by Tim Hudson ([email protected])”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS’’ AND ANY EXPRESS OR IMPLIED
2. Redistributions in binary form must reproduce the above copyright notice, this list of WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
conditions and the following disclaimer in the documentation and/or other materials MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
provided with the distribution.
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
3. All advertising materials mentioning features or use of this software must display the NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
following acknowledgment: “This product includes software developed by the OpenSSL DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)”
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
4. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
promote products derived from this software without prior written permission. For written
permission, please contact [email protected].
The licence and distribution terms for any publically available version or derivative of this
code cannot be changed. i.e. this code cannot simply be copied and put under another
5. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” distribution licence [including the GNU Public Licence.]
appear in their names without prior written permission of the OpenSSL Project.
6. Redistributions of any form whatsoever must retain the following acknowledgment:
“This product includes software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://www.openssl.org/)”
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS’’ AND ANY EXPRESSED LIBPNG LICENSE
OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN This software is based in part on libpng see http://www.libpng.org for information.
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY
Download from Www.Somanuals.com. All Manuals Search And Download.
175
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
TIMYXML LICENSE
TREMOR LICENSE
ZLIB LICENSE
Copyright (c) 2002, Xiph.org Foundation
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
- Neither the name of the Xiph.org Foundation nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS
IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
TTA LICENSE
Version 1.2, (c) 2004 Alexander Djourik. All rights reserved.
Alexander Djourik <[email protected]>
avel Zhilin <[email protected]>
Redistribution and use in source and binary forms, with or without modification, are
permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of
conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of
conditions and the following disclaimer in the documentation and/or other materials
provided with the distribution.
3. Neither the name of the True Audio Software nor the names of its contributors may be
used to endorse or promote products derived from this software without specific prior
written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS
IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
Download from Www.Somanuals.com. All Manuals Search And Download.
176
Important Safety Instructions
19
THIS PRODUCT UTILIZES A LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION EXPOSURE IF THIS PRODUCT IS USED INCORRECTLY. BE SURE TO FOLLOW THESE DIRECTIONS FOR PROPER
USE. DO NOT OPEN COVER AND DO NOT REPAIR OR SERVICE YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.
Using controls, making adjustments, or performing procedures, other than those specified herein, may result in hazardous radiation exposure.
Do not open covers and do not repair unit yourself. Refer servicing to qualified personnel.
To reduce the risk of fire, electric shock, or product damage, do not expose this apparatus to rain, moisture, dripping, or splashing, and take care that no objects filled with liquids, such
as vases, are placed on this product.
Do not install or place this unit in a bookcase, built-in cabinet, or other confined space. Do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains or similar
items. Ensure the unit is well-ventilated to prevent risk of electrical shock or fire hazard due to overheating.
Do not place sources of naked flames, such as lighted candles, on this unit. Dispose of batteries in an environmentally friendly manner.
THE FOLLOWING APPLIES ONLY TO THE U.S.A. AND CANADA
•
To prevent electric shock, match wide blade of plug to wide slot and fully insert. If the plug that comes with this unit does not fit into your electrical outlet, consult an electrician.
FOR THE MIDDLE EAST, SOUTH AFRICA, AND ASIA
This unit is intended for use in tropical climates.
•
FOR AUSTRALIA AND NEW ZEALAND
This unit is intended for moderate climates.
•
This product may receive radio interference caused by mobile telephones during use. If such inference occurs, increase the distance between the product and the mobile telephone.
DANGER: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. (IEC60825-1)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the
interference by one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that into which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Any unauthorized changes or modifications to this equipment will void the user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA:
This symbol is intended to alert the user to the presense of
uninsulated “dangerous voltage” within the product’s enclo-
sure that may be of sufficient magnitude to consititute a risk
of electric shock to persons.
The symbol is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
The laser product label has not been
attached to products for the U.S.A.
and Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
177
Read these instructions carefully before using the unit. Follow the safety instructions on the unit and safety precautions listed below.
Keep these operating instructions handy for future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install according to the manufacturer’s instructions.
Do not defeat the purpose of the polarized grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blades or the third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for a replacement of the obsolete outlet.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus, including amplifiers, that produce heat.
Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point at which they exit from the apparatus.
Only use the attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of a time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as when a power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
OUTDOOR USE WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
This apparatus must not be used outdoors
WET LOCATION MARKING
Apparatus should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the apparatus.
SERVICE INSTRUCTIONS
CAUTION - These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you qualify to do so.
SERVICE
1. CAUTION - Damage requiring service - The unit should be serviced by qualified service personnel if: the AC power supply cord or the plug has been damaged; objects or liquids have gotten into
the unit; the unit has been exposed to rain; the unit does not operate normally or exhibits a marked change in performance; or the unit has been dropped or the cabinet damaged.
2. CAUTION - Servicing - Do not attempt to service the unit beyond what is described in these operating instructions.
Refer all other servicing to authorized servicing personnel.
3. CAUTION - Replacement parts - When parts need replacing, ensure the service personnel uses parts specified by the manufacturer or parts that have the same characteristics as the original
parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4. CAUTION - Safety check - After repairs or service, ask the servicer to perform a safety check to confirm the unit is in proper working condition.
To clean this unit, wipe with a soft, damp cloth.
•
•
Never use alcohol, paint thinner or benzene to clean this unit.
Never use a chemically treated cloth.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
KiSS Technology A/S
Slotsmarken 10
DK-2970 Hørsholm
Denmark
Phone
Fax
+45 45 17 00 00
+45 45 17 00 60
Download from Www.Somanuals.com. All Manuals Search And Download.
|