Owner’s Manual
Keys 9000LI
Keys 9000OB
Customer Service
(888) 340-0482
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
CAUTION! Read all
precautions and instruc-
tions in this manual
before using this
equipment.
Model Name : KEYS9000LI
Serial Number :
Write down for future reference
PN 15-0170
05/05 Rev A
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Information
WARNING! Before using this treadmill or starting any exercise program, consult your physician. This is
especially important for persons over the age of 35 and/or persons with pre-existing health
problems. The manufacturer or distributor assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
WARNING! To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user it is
important to review this manual and the following precautions before operation.
SAFETY PRECAUTIONS AND TIPS
1. It is the owner's responsibility to ensure that all users of this treadmill have read the Owner's Manual and
are familiar with warnings and safety precautions.
2. This treadmill has a user maximum capacity of 400 pounds.
3. The treadmill should only be used on a level surface and is intended for indoor use only. The treadmill
should not be placed in a garage, patio, or near water and should never be used while you are wet. Keys
Fitness recommends a treadmill mat be placed under the treadmill to protect floor or carpet and for easier
cleaning.
4. Follow safety information in regards to plugging in your treadmill. Keep the power cord away from the
incline wheels and do not run the power cord underneath your treadmill. Do not operate the treadmill with a
damaged or frayed power cord.
5. Wear comfortable, good-quality walking or running shoes and appropriate clothing. Do not use the treadmill
with bare feet, sandals, socks or stockings.
6. Always straddle the belt and allow it to start moving before stepping onto the belt.
7. Hold on to handrail when adjusting speed, incline, or other controls.
8. Always examine your treadmill before use to ensure all parts are in working order.
9. Allow the belt to fully stop before dismounting.
10. Pets should never be allowed near or on the treadmill.
11. Do not leave children unsupervised near or on the treadmill.
12. Never operate the treadmill where oxygen is being administered, or where aerosol products are being used.
13. Never insert any object or body parts into any opening.
14. For safety and to prevent damage to your treadmill, no more than one person should use the treadmill at a
time.
15. Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be
performed by an authorized service representative, unless authorized and/or instructed by the manufacturer.
16. Failure to follow these instructions will void the treadmill warranty.
17. Never leave the treadmill unattended while it is running.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
Thank you for purchasing the Keys 9000LI or Keys 9000 OB Treadmill! This quality product you have
chosen was designed to meet your needs for cardiovascular exercise. Before you start, please read the
Owner's Manual and become familiar with the operation of your new treadmill.
Remember to take the time to perform the stretching exercises provided to avoid injury.
Do not stand on the walking belt while pressing the Power button or Start/Stop button.
Always adjust the speed of the treadmill in small increments as this treadmill is capable of high speeds.
If you are taking medication, consult your physician to see if the medication will affect your exercise
heart rate.
If you have heart problems, you are not active, and/or are over the age of 35 years, do not use the pre-set
treadmill programs or start an exercise program without first contacting and receiving approval from your
physician.
To avoid the risk of electrical shock, always keep the console dry. Do not spill liquids on the console. Keys
Fitness recommends a sealed water bottle for beverages consumed while using the treadmill.
Please review the drawing below (Figure 1) to familiarize yourself with the listed parts. This manual
covers several treadmills, so the one pictured below may not be identical to your particular model.
Figure 1
CONSOLE
UPRIGHTS
PLASTIC BOOTS
BELT
ENDCAPS
FRAME
NOTE: REMOVE PACKING MATERIAL
BEFORE STARTING TREADMILL
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
After opening the box, remove any packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
Locate the hardware pack and identify the following parts required for assembly.
Main Components:
Console Assembly
Upright Assembly
Boot Left
Boot Right
Endcap Left
Key #
Qty.
24-0279
23-0199
06-0246
06-0245
06-0238
06-0239
1
1
1
1
1
1
Endcap Right
Insert Pack:
Key #
Qty.
10
6
2
1
1
1
1
1
Philip Screw #8*5/8”
Button Head Screw 5/16-18*3/4”
Button Head Screw 1/4-20*3/4”
Safety Key
Allen Wrench 3/16”
Allen Wrench 5/16”
Allen Wrench Clip
Cup Holder
02-0004
02-0125
02-0202
02-0176
02-0152
02-0154
06-0024
02-0167
15-0170
Owner’s Manual
1
Chest Strap (OB Model Only)
07-0053
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
WARNING: Do not plug treadmill in until assembly is complete. Failure to follow this warning could
result in electrical shock and/or injury.
CAUTION: Keys Fitness recommends using two people to assemble the treadmill. Before beginning,
read all instructions and become familiar with the parts. In addition, look at the motor
controller circuit board on the base and find the slot where the wire harness plugs in.
Refer to Assembly Diagram (Figure 2) on next page.
1. While one person is holding the Upright Assembly secure in the air, attach the Console Harness to the
Lower Board. Place excess cable inside the left upright.
2. Slowly lower the Upright Assembly onto the Deck Assembly while aligning the bolt holes. Secure using 6
Button Head Screw 5/16-18*3/4” on the sides.
3. Attach the Lower Console Harness into the Upper Console Harness. Place excess cable into the left upright.
4. Attach the Console Assembly onto the Upright Assembly and secure using 2 Button Head Screw 5/16-
18*3/4.
5. Install Plastic Boots to cover the gaps between the Upright Assembly and Deck Assembly. Secure each
Metal Boots with 3 Philip Screw #8*5/8”.
6. Install End Caps with 2 Button Head Screw 1/4-20*3/4” on the ends and 2 #8 x 5/8” pan head screws on
the sides (see diagram for orientation).
7. Securely tighten all bolts and screws.
8. Remove packing material before starting treadmill.
9. Be sure that the treadmill is level to the floor. The rear feet can be adjusted to level the treadmill.
Assembly is now complete!
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly
Figure 2
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Requirements
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT
IN A RISK OF AN ELECTRIC SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR
SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE PRODUCT IS PROPERLY
GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT. IF PLUG
WILL NOT FIT THE OUTLET, HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED
ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage
spikes, surges, and noise interference can result from weather conditions or from other appliances being turned
on or off. To reduce the possibility of treadmill damage, always use a dedicated surge protector (not includ-
ed) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet
surge protector with UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with UL suppressed
voltage rating of 400V or less and an electrical rating of 120VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least
resistance for electric current should the treadmill malfunction. This treadmill comes with an electrical cord
with an equipment-grounding conductor and a grounding plug. Always plug the power cord into a surge pro-
tector, and plug the surge protector into an appropriate outlet that is properly installed and grounded in accor-
dance with all local codes and ordinances. Do not connect other equipment to the surge protector or this could
cause permanent damage to your treadmill.
This product is for use on a nominal 120-volt circuit and has a grounding plug that looks like the plug illustrat-
ed in the drawing below.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Console Panel Functions
There are several display windows on the control panel to provide feedback information. Refer to Figure 3.
CENTER INFORMATION WINDOW: (Long rectangular box near bottom of console) Provides user infor
mation before starting. After starting indicates INCLINE, TIME and SPEED or PACE.
INCLINE: Indicates incline in percent of grade in .5% increments (0%-15%).
TIME: Indicates elapsed time after pressing START in minutes and seconds(0-99 minutes, 0-59 seconds).
SPEED: Indicates MPH in .1MPH increments (.6 MPH to 12MPH). During operation the MODE button
will toggle this window between speed and pace.
PACE: Indicates amount of time required to complete 1 mile at current speed. During operation the
ENTER MODE button will toggle this window between SPEED and PACE.
ENTER MODE: Used for programming functions.
DISTANCE: Indicates miles traveled in .01 mile increments up to 9.99 and .1 mile increments above 10
miles.
CALORIES: Indicates estimated calories burned based on 150 lb. person at the indicated speed, incline, and
time. During operation the ENTER MODE button will toggle this window between calories or pulse.
PULSE: Indicates pulse rate. PULSE will not register unless you have both hands on the handgrips. During
operation if PULSE is activated INCLINE will only show when adjustments are made.
DOT MATRIX: In manual mode, indicates Lap Counter in 1/4 mile increments. In program mode, indicates
progress of program as a blinking diode and shows program profile.
ENTER PROGRAM: Used to scroll between pre-set and user programs.
PROGRAM UP/ PROGRAM DOWN: Scrolls program levels 1-9, with 1 being the easiest and 9 being the
most difficult.
START/STOP: Starts the treadmill after a 3 second delay. Stops the treadmill when it is in operation.
INCLINE+/-: Adjusts the percent of incline during programming or use. Also can be used during program-
ming to scroll through programs.
INCLINE 2-10: One Touch buttons to change percent of grade from 2%-10%. For incline greater than 10%
use the UP button.
STOP: Stops the motion of the treadmill at any point during operation. Also used as a Pause function, retain-
ing information in all windows unless safety key is removed.
SPEED 2-10: One touch buttons to change speed in 1MPH increments from 2-10MPH. For speeds greater
than 10MPH use the Speed + button.
SPEED +/-: Adjusts the speed in .1 MPH increments during programming or use.
HEART RATE MODE: Used to select heart rate program.
HEART RATE TARGET UP: Scrolls through heart rate programs
HEART RATE TARGET DOWN: Scrolls through heart rate programs
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Console Panel Functions
KEYS 9000 Overlay
Figure 3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Operation
QUICK START/MANUAL MODE
1. Plug into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit or press the ENTER PROGRAM button repeatedly to
scroll to MANUAL mode.
3. Attach the Safety Key to the treadmill console.
4. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
5. Press START/STOP button. Belt will begin to move after 3 seconds. Step on belt slowly after the belt
starts moving. SPEED or INCLINE may be adjusted at any time by using the appropriate + (increase) or –
(decrease) buttons on the console, + (increase) or – (decrease) buttons on the handgrips or one touch but-
tons on the console. TIME default is 30 minutes.
6. To end your workout, press STOP button. Belt will gradually slow to zero.
7. To pause your workout slow the treadmill to 2 MPH or below using the SPEED - (decrease) buttons on the
console, – (decrease) buttons on the handgrips or Speed one touch “2” button on the console. Press the
STOP button.
8. To re-start after pausing: Press the START button. WARNING: THE TREADMILL BELT WILL
RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
MANUAL MODE
1. Plug into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit or press the ENTER PROGRAM button repeatedly to
scroll to MANUAL mode.
3. Attach the Safety Key to the treadmill console.
4. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
5. The Information Window will scroll the following messages:
ADJUST WEIGHT
PRESS ENTER MODE
PRESS START
The weight that was last entered will show in Information Window. Use the SPEED + - buttons on the
console or the SPEED + - buttons on the handgrips to enter desired weight.
6. Press START/STOP button. Belt will begin to move after 4 seconds. Step on belt slowly after the belt
starts moving. SPEED or INCLINE may be adjusted at any time by using the appropriate + (increase) or –
(decrease) buttons on the console, + (increase) or – (decrease) buttons on the handgrips or one touch but-
tons on the console. TIME default is 30 minutes.
7. To pause your workout slow the treadmill to 2 MPH or below using the SPEED - (decrease) buttons on the
console, – (decrease) buttons on the handgrips or Speed one touch “2” button on the console. Press the
STOP button.
8. To re-start after pausing: Press the START button. WARNING: THE TREADMILL BELT WILL
RESUME AT THE SPEED THE TREADMILL WAS MOVING BEFORE PAUSING.
9. To reset DISTANCE, TIME and CALORIES counter during use, press and hold START/STOP button for
approximately 5 seconds or until zeros appear in the DISTANCE, TIME and Information Window. To
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Operation
10. To use Countdown Timer Feature for TIME and DISTANCE, after entering WEIGHT press ENTER-
MODE button the Information Window will now scroll through the following items:
ADJUST TIME + -
NEXT ENTER
ADJ DISTANCE
NEXT ENTER
PRESS START
11. Adjust TIME using the SPEED + - buttons on the console or the handgrips. Press ENTER MODE.
12. Adjust the DISTANCE using the SPEED + - buttons on the console or handgrips. Press START STOP to
begin countdown.
Note: Once elapsed time or distance has been reached, countodwn reaches 0, the Countdown Feature
will begin counting up.
13. To save manual workout: After pressing STOP button , Press and Hold the ENTER/MODE button until
SAVE USER 1, SAVE USER 2, or SAVE USER 3 appears in Information Window. Press the + INCLINE
button until USER 1, USER 2 or USER 3 message appears in the Information Window. When you have
selected the USER PROGRAM that you would like to save your workout to, press and hold the
ENTER/MODE button until SAVE USER 1, SAVE USER 2 or SAVE USER 3 appears in the Information
Window. Your program is now saved.
Note: You must remove the Safety Key for the information to be entered into the console’s computer.
If you do not remove the Safety Key the USER PROGRAM will not be saved.
PROGRAM MODE
1. Plug into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit or press the ENTER PROGRAM button repeatedly to
scroll to MANUAL mode.
3. Attach the Safety Key to the treadmill console.
4. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
The weight that was entered last will show in Information Window. Use the SPEED + - buttons on the
console or the SPEED + - buttons on the handgrips to enter desired weight.
5. Press ENTER MODE.
6. The Information Window will now scroll through the following items:s NEXT UP/DOWN, ENTER
MODE, PRESS START. To select a program use the INCLINE + - on the console or handgrips or use the
PROGRAM UP or PROGRAM DOWN buttons to scroll through the following programs:
MANUAL - See previous section.
USER - See following section for USER PROGRAM instructions.
KILLER HILLS - Designed to have a constant SPEED while incrementally increasing the INCLINE
through the first half of the program, then decreasing the INCLINE through the second half of the pro-
gram.
WEIGHT MANAGER - Designed to have a constant SPEED while alternating the INCLINE through the
entire program.
PLATEAU - Designed to incrementally increase the SPEED and INCLINE through the first half of the
program, then decrease the SPEED and INCLINE through the second half of the program.
INTERVAL RUNNING - Designed to have a constant INCLINE while alternating the SPEED through
the entire program.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Operation
* See Figure 4 for graphs of SPEED and INCLINE for each program. See Figure 5 for charts of SPEED
and INCLINE settings for each PROGRAM LEVEL.
7. You do not have to select the program, just scroll through until you see the desired program in the
Infomation Window. After a few seconds the Information Window will scroll the following messages:
ADJUST LEVEL +/-
NEXT UP/DOWN
PRESS START
8. To select a program intensity level (See Calorie Window) use the PROGRAM UP and PROGRAM DOWN
buttons to select a level 1-9. The higher the level, the more intense the workout will be.
9. Press ENTER MODE button to select Program Level.
10. The Infomation Window will now scroll the following messages:
ADJUST TIME +/-
ENTER MODE
PRESS START
11. To set the TIME for your workout use the SPEED + - buttons on the console or handgrips, or the one
touch buttons on the console to select the TIME duration for your workout. Minimum time is 15 minutes.
Figure 4
12
11
10
9
8
7
6
5
4
3
12
11
10
9
8
7
6
5
4
3
HILL INTERVAL PROGRAM
SPEED INTERVAL PROGRAM
SPEED
SPEED
INCLINE
INCLINE
2
1
2
1
1 2 3 4 5 6 7 8 9 1 0
1 2 3 4 5 6 7 8 9 1 0
12
CARDIOVASCULAR PROGRAM
12
WEIGHT LOSS PROGRAM
11
10
9
8
7
6
5
4
3
11
10
9
8
7
6
5
4
3
SPEED
SPEED
INCLINE
INCLINE
2
1
2
1
1 2 3 4 5 6 7 8 9 1 0
1 2 3 4 5 6 7 8 9 1 0
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Operation
12 Press the START/STOP. Treadmill will begin operation after 3 seconds.
13. Once treadmill program has begun you can adjust the SPEED and INCLINE by using the + - buttons on
the console or handgrips, or the one touch buttons on the console.
14. To pause your workout slow the treadmill to 2 MPH or below using the SPEED - (decrease) buttons on
the console, – (decrease) buttons on the handgrips or Speed one touch “2” button on the console. Press the
STOP button. This will retain the treadmill and retain all workout information. To resume workout
press START/STOP button.
15. To reset DISTANCE, TIME and CALORIES counter during use, press and hold START/STOP button for
approximately 5 seconds or until zeros appear in the DISTANCE, TIME and Information Window. To
reset when not in use, press and hold the STOP button for 5 seconds.
16. You may change between programs while using treadmill by pressing the ENTER PROGRAM button
until the desired program is shown in Information Window. Press PROGRAM UP or DOWN to change
programs. Workout will resume from the original time entered.
USER PROGRAM -
The USER PROGRAM allows up to 50 changes to be made to SPEED and/or INCLINE. The treadmill is
equipped with 3 USER programs. One SPEED and INCLINE change can be made for every 30 second time
block.
1. To enter a USER PROGRAM start and complete a manual workout that you would like to save.
2. Press STOP.
3. Press and hold the ENTER MODE button until SAVE USER 1 appears in the Information Window.
4. Press the + INCLINE button until USER 1, USER 2 or USER 3 message appears in the Information
Window.
5. When you have selected the USER PROGRAM that you would like to save your workout to,
press and hold the ENTER/MODE button until SAVE USER 1, SAVE USER 2 or SAVE USER 3
appears in the Information Window.
6. Your USER PROGRAM is now saved.
Note: You must remove the Safety Key for the information to be entered into the console’s computer.
If you do not remove the Safety Key the USER PROGRAM will not be saved.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Operation
Figure 5
HILL INTERVAL PROGRAM
WEIGHT LOSS PROGRAM
SPEED
INCLINE
MAX
SPEED
INCLINE
MAX
MPH MAX
MPH MAX
LEVEL
LEVEL
1
2
3
4
5
6
7
8
9
2.4
2.8
3.2
3.6
4.2
4.6
5.0
5.4
6.0
4.0
5.0
1
2
3
4
5
6
7
8
9
2.6
2.8
3.0
3.2
3.4
3.6
3.8
4.0
4.2
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
6.0
7.0
8.0
9.0
10.0
11.0
12.0
CARDIOVASCULAR PROGRAM
SPEED INVTERVAL PROGRAM
SPEED
INCLINE
MAX
SPEED
INCLINE
MAX
MPH MAX
MPH MAX
LEVEL
LEVEL
1
2
3
4
5
6
7
8
9
2.4
2.8
3.2
3.6
4.2
4.6
5.0
5.4
6.0
4.0
5.0
1
2
3
4
5
6
7
8
9
2.4
2.8
3.2
3.6
4.2
4.6
5.0
5.4
6.0
4.0
5.0
6.0
6.0
7.0
7.0
8.0
8.0
9.0
9.0
10.0
11.0
12.0
10.0
11.0
12.0
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Mode
HEART RATE MODE
The treadmill may be used at any time in the Heart Rate Mode. The Heart Rate program is designed to
keep your heart at a desired amount of “beats per minute” by automatically adjusting the incline. For
example, you have programmed in a desired heart rate of 125 BPM and your heart rate is only at 110
BPM. If you are wearing the Chest Strap Transmitter correctly, the incline will automatically increase to
intensify the work load, causing your heart rate to slowly climb to 125 BPM. It is suggested that the Chest
Strap Transmitter be positioned as close to your heart as possible, against the skin, 1-2 inches below the
pectoral muscles. The PULSE light on the console will blink when the Chest Strap signal is reaching the
console. The treadmill will attempt to maintain your target heart rate through adjustments to the incline for
the remainder of your workout. In the same respect, if your heart rate is above your programmed amount
of BPM’s, the incline will automatically decrease to lower your heart rate. See Figure 3, Figure 4, and sec-
tion entitled”Monitoring Your Heart Rate” for additional information on TARGET HEART RATES.
The Heart Rate Mode is safe and easy to understand. The user first sets the maximum Incline, Heart Rate
Target and Time. The workout is divided into three stages: Warm Up, Heart Rate Interactive and Cool
Down. In the Warm Up stage the treadmill is in MANUAL mode while the user adjusts Speed and Incline
while approaching Target Heart Rate. The Warm Up stage ends and the Heart Rate INTERACTIVE Mode
begins when the user’s Target Heart Rate is within 10 beats of the preset Target Heart Rate. The treadmill
will take over and adjust Incline in .5 increments up to the maximum Incline programmed to keep user’s
Heart Rate within 10 beats of preset target. In the COOL DOWN stage the treadmill is in MANUAL mode
while the user gradually decreases INCLINE and SPEED to slowly cool down.
HEART RATE PRESET PROGRAM OVERVIEW
There are a total of 14 different Heart Rate Programs. These are divided into three groups. The following
is a brief description of each of the three groups.
Time Based Target Heart Rate Programs- Programs are all Time based. There are five different programs
in this group. You may preset your Target Heart Rate and maximum Incline.
Distance Based Target Heart Rate Programs - Programs are all Distance based. There are 4 different pro-
grams in this group: 2 Mile, 4 Mile, 5K or 10K You may preset your Target Heart Rate and maximum
Incline. The Time of your workout will depend on your SPEED.
Interval Time Based Target Heart Rate Programs - These Programs allows you to program periods of rest
between periods of work. You must enter your Target Heart Rate, maximum Incline, duration of workout,
and duration of work and rest intervals.
HEART RATE PROGRAM OPERATION FOR TIME AND DISTANCE PROGRAMS
1. Plug treadmill into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit..
3. Attach the Safety Key on to the treadmill console.
4. Attach the Heart Rate Monitor as previously instructed. If the display is receiving a signal from the chest
strap, the incline window will begin to display your current heart rate. If no signal is being received adjust
the Heart Rate Monitor location.
5. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
6. The Information Window will scroll the following messages:
ADJUST WEIGHT
PRESS ENTER MODE
PRESS START
The weight that was entered last will show in Information Window. Use the SPEED + - buttons on the
console or the SPEED + - buttons on the handgrips to enter desired weight. Press ENTER MODE
7. Press the HEART RATE MODE button. Use Heart Rate Target UP and DOWN buttons to scroll to the
desired HEART RATE PROGRAM.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Mode
8. You do not have to select the program. After a few seconds the Information Window will scroll through
the following items:
ENTER MODE
NEXT UP/DOWN
PRESS START
9. Press ENTER MODE button. The Information Window will now scroll through the following items:
ADJUST TARGET +/-
NEXT MODE
PRESS START
10. Using the HEART RATE UP or DOWN button on the console adjust your TARGET HEART RATE to the
desired BPM (beats per minute). Press ENTER MODE.
11. The Information Window will now scroll through the following items::
ADJ TIME +/-
NEXT MODE
PRESS START
12. Using the SPEED +/- buttons on the console or handgrips, or the one touch buttons on the console adjust
Time. Note: TIME is not entered for Distance programs, 2 Mile, 4 Mile, 5K or 10K. Press
ENTER MODE button.
13. The Information Window will now scroll through the following items:
ADJMXGRADE +/ -
NEXT MODE
PRESS START
14. Using the INCLINE +/- buttons on the console or handgrips, or the one touch buttons on the console to
enter maximum INCLINE for y our work
out.
15. You are now ready to START your Time or Distance HEART RATE workout. Press START to begin.
16. Your workout will begin in the Warm Up Stage. In this stage, the treadmill will operate in Manual Mode.
By gradually increasing the SPEED, INCLINE or both you should gradually approach your TARGET
HEART RATE. Note: The INCLINE can not exceed the maximum that was programmed previously.
17. Once you are within 15 BPM of your TARGET HEART RATE, the Information window will read:
APPROACHING TARGET XXX.
18. Once you are within 10 BPM of your TARGET HEART RATE, the Information window will read:
BEGINNING
TARGET HR
HANDS FREE
19. At this point, the treadmill computer will take over and adjust INCLINE automatically to keep to increase
TARGET HEART RATE. The TIME window will reset and begin counting down from the time
entered during programming.
20. Once you are within 2 BPM of programmed HEART RATE the Information Window will read:
AT TARGET
21. When TIME is elapsed the HEART RATE INTERACTIVE stage is complete. The Information
Window will read:
COOL DOWN
DIST XXX
CALS XXXX
TIME XX:XX
COOL DOWN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Mode
22. COOL DOWN will remain in the Information Window to remind you that you are in the COOL DOWN
stage.
23. The treadmill will now operate in MANUAL MODE. The TIME will reset to zero and begin counting up.
Gradually decrease INCLINE, SPEED or both to lower HEART RATE. Spend at least two minutes in the
COOL DOWN mode. It is recommended that equal time be spent in the WARM UP and COOL DOWN
stages.
24. Press STOP to finish workout. The Information Window will display your workout information. This will
include:
Average Heart Rate
Distance
Calories
Each time your press STOP the information will display again.
NOTES: Do not touch the INCLINE button once reaching your TARGET HEART RATE. The tread
mill’s computer will automatically switch from the HEART RATE INTERACTIVE stage to the COOL
DOWN stage. If your INCLINE reaches the preset maximum, MAXGRADE will display in the INFOR
MATION WINDOW.
If you need to adjust the TARGET HEART RATE during INTERACTIVE stage, press the HEART RATE
MODE button. Adjust the TARGET HEART RATE using the HEART RATE TARGET UP or DOWN
buttons.
HEART RATE PROGRAM OPERATION FOR INTERVAL PROGRAMS
Interval workouts offer variety and help you attain higher levels of conditionaing in a shorter period of
time. It is recommended that you do not do an Interval workout until you have used your treadmill on a
regular basis and have a working knowledge of your Target Heart rate and condition level.
1. Plug treadmill into a surge protector outlet.
2. Press Power toggle switch on lower rear of unit or the ENTER PROGRAM button.
3. Attach the Safety Key on to the treadmill console.
4. Attach the Heart Rate Monitor as previously instructed. If the display is receiving a signal from the chest
strap, the incline window will begin to display your current heart rate. If no signal is being received adjust
the Heart Rate Monitor location.
5. Stand on the treadmill and straddle belt. Attach safety key clip to your clothes.
6. The Information Window will scroll the following messages:
ADJUST WEIGHT
ENTER MODE
PRESS START
The weight that was entered last will show in Information Window. Use the SPEED + - buttons on the
console or the SPEED + - buttons on the handgrips to enter desired weight. Press ENTER MODE
7. Press the HEART RATE MODE button. The Information Window will now scroll through the following
items:
NEXT UP/DOWN
ENTER MODE
PRESS START
8. Use Heart Rate Target UP and DOWN buttons to scroll to the desired INTERVAL HEART RATE PRO
GRAM. Press ENTER MODE.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Mode
9. The Information Window will now scroll through the following items:
ADJUST TARGET +/-
NEXT MODE
PRESS START
10. Using the HEART RATE UP or DOWN button on the console or handgrips, or the one touch buttons on
the console adjust your TARGET HEART
ENTER MODE.
RATE to the desired BPM (beats per minute). Press
11. The Information Window will now scroll through the following items::
ADJWORK +/-
NEXT MODE
PRESS START
12. Using the SPEED +/- buttons on the console or handgrips, or the one touch buttons on the console, select
your desired work interval. Interval may be adjusted from 30 seconds to 3 minutes, in 5 second seg
ments. Press ENTER MODE.
13. The Information Window will now scroll through the following items::
ADJREST +/-
NEXT MODE
PRESS START
14. Using the SPEED +/- buttons on the console or handgrips, or the one touch buttons on the console, select
your desired rest interval. Interval may be adjusted from 30 seconds to 3 minutes, in 5 second seg
ments. Press ENTER MODE.
15. The Information Window will now scroll through the following items::
ADJMXGRADE + -
NEXT MODE
PRESS START
16. Using the INCLINE +/- buttons on the console or handgrips, or the one touch buttons on the console to
enter maximum INCLINE for your workout.
17. You are now ready to START your Interval HEART RATE workout. Press START to begin.
18. The Information Window will now scroll through the following items::
STARTING 3
STARTING 2
STARTING 1
ADJSPEED +/-
ADJGRADE +/-
WARM UP
TARGET XXX
19. Your workout will begin in the Warm Up Stage. In this stage, the treadmill will operate in Manual Mode.
By gradually increasing the SPEED, INCLINE or both you should gradually approach your TARGET
HEART RATE. Note: The INCLINE can not exceed the maximum that was programmed previously.
20. Once you are within 15 BPM of your TARGET HEART RATE, the Information window will read:
APPROACHING TARGET XXX.
21. Once you are within 10 BPM of your TARGET HEART RATE, the Information window will read:
BEGINNING
TARGET HR
HANDS FREE
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Mode
22. At this point, the treadmill computer will take over and adjust INCLINE automatically to keep Target
Heart Rate at preset level.
23. Once you are within 2 BPM of programmed HEART RATE the Information Window will read:
AT TARGET
WORKINT XX:XX
24. TIME will decrease from the Work Interval Time preset previously.
25. When the countdown reaches zero, the Information Window will read:
RESTINT XX:XX
26. Time will decrease from the Rest Invterval time preset previously.
27. As your Heart Rate increases or decreases from the Target the treadmill will automatically make adjust
ments to the INCLINE to keep your heart rate near the target.
25. When you return to the Work Interval, your INCLINE will return to a calculated average of the INCLINE
that was used in previous Work Intervals.
26. To end your workout press STOP.
27. The Information Window will now scroll through the following items::
COOL DOWN
DIST XXX
CALS XXXX
TIME XX:XX
COOL DOWN
28. COOL DOWN will remain in the Information Window to remind you that you are in the COOL DOWN
stage.
29. The treadmill will now operate in MANUAL MODE. The TIME will reset to zero and begin counting up.
Gradually decrease INCLINE, SPEED or both to lower Heart Rate. Spend at least two minutes in the
COOL DOWN mode. It is recommended that equal time be spent in the WARM UP and COOL DOWN
stages.
30. Press STOP to finish workout. The Information Window will display your workout information. This
will include:
Average Heart Rate
Distance
Calories
Each time your press STOP the information will display again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring Your Heart Rate
Monitoring Your Heart Rate
To obtain the greatest cardiovascular benefits from your exercise workout, it is important to work within your
target heart rate zone. The American Heart Association (AHA) defines this target as 60%-75% percent of your
maximum heart rate.
Your maximum heart rate may be roughly calculated by subtracting your age from 220. Your maximum heart
rate and aerobic capacity naturally decreases as you age. This may vary from one person to another, but use
this number to find your approximate effective target zone. For example, the maximum heart rate for an aver-
age 40 year-old is 180 bpm. The target heart rate zone is 60%-75% of 180 or 108-135 bpm. See Fitness Safety
below.
Before beginning your workout, check your normal resting heart rate. Place your fingers lightly against your
neck, or against your wrist over the main artery. After finding your pulse, count the number of beats in 10 sec-
onds. Multiply the number of beats by six to determine your pulse rate per minute. We recommend taking your
heart rate at these times; at rest, after warming up, during your workout and two minutes into your cool down,
to accurately track your progress as it relates to better fitness.
During your first several months of exercising, the AHA recommends aiming for the lower part of the target
heart rate zone-60%, then gradually progressing up to 75%.
According to the AHA, exercising above 75% of your maximum heart rate may be too strenuous unless you
are in top physical condition. Exercising below 60% of your maximum will result in minimal cardiovascular
conditioning.
Check your pulse recovery rate – If your pulse is over 100 bpm five minutes after you stop exercising, or if
it’s higher than normal the morning after exercising, your exertion may have been too strenuous for your cur-
rent fitness level. Rest and reduce the intensity next time.
Fitness Safety The target heart rate chart(Figure 7) indicates average rate zones for different ages. A variety
of different factors (including medication, emotional state, temperature and other conditions) can affect the
target heart rate zone that is best for you. Your physician or health care professional can help you determine
the exercise intensity that is appropriate for your age and condition.
(MHR) = Maximum Heart Rate
(THR) = Target Heart Rate
220 - age = maximum heart rate (MHR)
MHR x .60 = 60% of your maximum heart rate.
MHR x .75 = 75% of your maximum heart rate.
For example, if you are 30 years old, your calculations will be as follows:
220 - 30 = 190
190 x .60 = 114 (low end or 60% of MHR)
190 x .75 = 142 (high end or 75% of MHR)
30 year-old (THR) Target Heart Rate would be 114-142
See Heart Rate Table (on next page) for additional calculations.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring Your Heart Rate
FIGURE 7
TARGET HEART RATE ZONE
200
100%
195
190
185
180
175
Serious
athletic
training range
170
165
160
155
85%
170
150
166
146
162
143
157
139
153
135
149
131
105
Cardiovascular
conditioning range
145
128
102
140
124
99
136
120
96
132
75%
Fat burning range
116
93
60%
120
117
114
111
108
20 25 30 35
40 45 50 55 60 65
AGE
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Warm Up Exercises
EXERCISE GUIDELINES
WARNING! Before beginning this or any exercise program, you should consult your physician. This is espe-
cially important for individuals over the age of 35 or individuals with pre-existing health problems.
Warming up prepares the body for the exercise by increasing circulation, supplying more oxygen to the mus-
cles and raising body temperature. Begin each workout with 5 to 10 minutes of stretching and light exercise
to warm up. The photos on this page show several forms of basic stretching you may perform before your
workouts. In order to achieve an adequate warm-up, perform each stretch three times.
TOE TOUCH STRETCH
Stand, bending your knees slightly and slowly bend forward from your hips.
Allow your back and shoulders to relax as you reach down toward your toes
as far as possible. Hold for 15 counts, then relax. This will stretch your ham-
strings, back of knees, and back.
HAMSTRING STRETCH
Sit with one leg extended. Bring the sole of the opposite foot toward you and
rest it against the inner thigh of your extended leg. Reach toward your toes as
far as possible. Hold for 15 counts, then relax. This will stretch your ham-
strings, lower back, and groin.
CALF/ACHILLES STRETCH
With one leg in front of the other, reach forward and place your hands against
a wall. Keep your back leg straight and your back foot flat on the floor. Bend
your front leg, lean forward and move your hips toward the wall. Hold for 15
counts, then relax. To cause further stretching of the Achilles tendon, bend
your back leg as well. This will stretch your calves, Achilles tendons, and
ankles.
QUADRICEPS STRETCH
With one hand against a wall for balance, reach back and grasp one foot with
your other hand. Bring your heel as close to your buttocks as possible. Hold
for 15 counts, then relax. This will stretch your quadriceps and hip muscles.
INNER THIGH STRETCH
Sit with the soles of your feet together and your knees outward. Pull your
feet toward your groin area as far as possible. Hold for 15 counts, then relax.
This will stretch your quadriceps and hip muscles.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Change to MPH or KPH
Your treadmill will operate in British Units (miles per hour) or International Units (kilometers per hour). All
treadmills are calibrated at the factory for British Units (miles per hour). To change the display to read in kilo-
meters, follow the steps described here:
1. Turn power OFF. (Do not unplug treadmill.) Attach the safety key to the console.
2. Activate the calibration mode switch by inserting the eraser end of a pencil into the opening in the backside
of the console (see diagram below).
3. Depress the calibration mode switch ONCE. CL11 should appear in the TIME window.
4. Pressing the SPEED +/- button will activate your choice.
5. To accept the setting, press the START/STOP button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Calibration Sequence
Do not attempt to calibrate the treadmill unless an Error Code is present. See Error Messages (page 22).
Our treadmill is equipped with a software package that will perform a calibration sequence unique to your
specific model number.
Please perform the following steps to calibrate the Keys9000.
1. Unplug power cord from outlet strip.
2. Attach Safety Key to console.
3. Plug power cord into outlet strip.
4 . Initiate calibration sequence. Locate the hole on the back of the console and insert the eraser end of a pen
cil through the hole and press the calibration switch twice. As show on page 18.
5. CL21 should appear in the Time window, if not, continue to press the calibration switch until CL21
appears.
Note: During the calibration sequence, the Time window will display which step you are at in the process
(C21, C22, C23 and so on). The CAL/DIST window will display which key should be pressed next. For
example, “E” for Enter, “P” for Power, or “SS” for Start / Stop.
6. CL21: MPH or KPH will be flashing in the Speed window, pressing the Speed +/ - button will toggle
options. Choose MPH (KPH), press Enter.
7. CL22: 8, 10, or 12 (13, 16, or 20 in KPH mode) will be displayed in the Speed window, pressing the
Speed +/ - button will toggle options. Choose 12 (or 16 for KPH mode), press Enter.
8. CL23: FFF, UUU, or HHH will be displayed in the Speed window, pressing the Speed +/ - button will tog
gle options. Choose UUU, press Enter.
9. CL24: 111 or 222 will be displayed in the Speed window, pressing the Speed +/ - button will toggle
options. Choose 222, press Enter.
10. CL25: Verify “---” is displayed, press Enter.
11. CL26: OPA or OPI will be displayed in the Speed window, pressing the Speed +/ - button will toggle
options. Choose OPA, press Enter.
12. CL27: Blank (nothing), “a”, “b”, “c”, “d” or “e” will be displayed in the Incline window, pressing the
Speed +/ - button will toggle options. Choose “blank”, press Enter.
13. CAL/DIST window will display “55”. Press Start / Stop. “E” will display in CAL/DIST window.
14. Press Enter Program button.
15. At this time, make sure you are not standing on the walking belt, as the machine will automatically initiate
belt movement and run through a complete calibration and diagnostic routine. Press Enter. Belt will
begin to move. Unit will begin self-calibration.
16. When Speed and Incline calibration has finished, press Power button twice, display should be blank, and
treadmill should be ready for use.
To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill
until the problem is corrected. Call Keys Fitness Customer Service at (888)-340-0482 if problem
persists.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Belt Adjustment
WARNING! Do not over-tighten rollers! This will cause prema-
ture roller bearing failure!
Belt adjustment and tension performs two functions: adjustment for
tension and centering. Your new treadmill comes pre-adjusted from
the factory for tension and centering. Please follow the procedures
below if the belt shifts to the left or right while walking:
WALKING BELT IS SHIFTING TO THE LEFT (Diagram 1)
First, turn treadmill on to run at 1 mph. Using the hex key provid-
ed, turn the left rear roller adjustment bolt ¼ turn in the clockwise
direction. Next, run the treadmill at 2.5 mph. You should see the belt
start to correct itself by moving back toward the center. Repeat the
above procedure until the walking belt is centered. It may be neces-
sary to set walking belt tension once you have completed this proce-
dure if the belt feels like it is slipping while walking. Refer below to
the “Walking Belt Slipping” instructions.
Diagram 1
WALKING BELT IS SHIFTING TO THE RIGHT (Diagram 2)
First, turn the treadmill on to run at 1 mph. Using the hex key pro-
vided, turn the right rear roller adjustment bolt ¼ turn in the clock-
wise direction. Next, run the treadmill at 2.5 mph. You should see
the belt start to correct itself, moving back toward the center. Repeat
the above procedure until the walking belt is centered. It may be
necessary to set walking belt tension once you have completed this
procedure if the belt feels like it is slipping while walking. Refer
below to the “Walking Belt Slipping” instructions.
WALKING BELT IS SLIPPING DURING USE (Diagram 3)
First, unplug the power cord from the surge protector. Using the hex
key provided, turn both left and right rear roller adjustment bolts the
same distance, usually a ¼ turn, in the clockwise direction. Plug the
power cord back into the surge protector and run the treadmill at 2.5
mph. You should now walk on the belt to determine if the belt is still
slipping. Repeat the above procedure until the walking belt is not
slipping. The tension should be just tight enough not to slip.
Diagram 2
Note: Turning the hex key counter clockwise brings the rear
rollers and belt towards you.
Turning the hex key clockwise pushes the rear roller and belt
away from you.
Diagram 3
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance Instructions
WARNING! Before performing any maintenance to your treadmill, always unplug the power cord from
the surge protector.
CLEANING: Routine cleaning of your unit will extend the life of your unit.
WARNING! To prevent electrical shock, be sure the power to the treadmill is OFF and the unit is unplugged
from the wall electrical outlet before attempting any cleaning or maintenance.
AFTER EACH WORKOUT: Wipe off the console and other treadmill surfaces with a clean, water damp-
ened soft cloth to remove excess perspiration. USE NO CHEMICALS.
WEEKLY: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the
belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.
DECK LUBRICATION: The walking belt has been pre-lubricated at the factory. However, it is recommend-
ed that the walking board be checked periodically for lubrication to ensure optimal treadmill performance.
Every 30 days or 30 hours of operation, lift the sides of the walking belt and feel the top surface of the walk-
ing board as far under as you can reach. If you feel signs of silicone, no further lubrication is required. If it
feels dry to the touch, lubrication is needed. Keys Fitness recommends “Lube N Walk” for cleaning and lubri-
cating the treadmill belt and deck. Ask your retailer or call Keys Fitness at 888-340-0482. You may also use
silicone such as “Napa 8300” (available at most NAPA Auto Parts stores).
TO APPLY LUBRICANT TO THE WALKING BOARD
1) Position the walking belt so that the seam is located on top and in the center of the center of the walking
board.
2) Insert the spray nozzle into the spray head of the lubricant can.
3) While lifting the side of the walking belt, position the spray nozzle between the walking belt and the board
approximately 6” from the front of the treadmill. Apply the silicone spray to the walking board, moving from
the front of the treadmill to the rear. Repeat this on the other side of the belt. Spray approximately 4 seconds
on each side.
4) Allow the silicone to ‘set’ for one minute before using the treadmill.
WARNING: Do not over-lubricate the walking board. Excess lubricant should be wiped off with a clean
towel.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Treadmill Error Messages.
Your treadmill is equipped with a software package that enables error messages to be displayed when there is
a problem. The following error codes will be displayed in the console display windows.
Safety Interlock Error Messages
SI 1 - Safety key missing, replace and try again.
SI 2 - Over voltage protection trip. Notify Keys Fitness Customer Service.
Other Error Messages
E11 - Lack of speed feedback data from belt motor. Attempt calibration. See Calibration Sequence section of
this Owners Manual for detailed information.
E22 - Under Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence sec-
tion for detailed information.
E33 - Over Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence sec-
tion for detailed information.
E44 - Stuck key detected at power up, Notify Keys Fitness Customer Service.
To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill
until the problem is corrected. Call Keys Customer Service at 888-340-0482.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Treadmill will not start.
1. Is the Safety Key inserted into the treadmill Console?
2. Make sure the power cord is plugged into a surge protector, the surge protector is plugged into a properly
grounded outlet, and the surge protector is turned on. (Refer to “Power Requirements” .)
3. Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait
five minutes and then press the switch back in.
4. Check the house electrical breaker box and the circuit breaker for the room where the treadmill is located.
If it has tripped, reset or have an electrician replace the breaker in home.
5. Have an electrician check to insure there is adequate voltage at the outlet.
Treadmill loses power during use.
1. Check the circuit breaker located on the front of the treadmill. If the switch protrudes, it has tripped. Wait
five minutes and then press the switch back in.
2. Check the house electrical breaker box and the circuit breaker for the room where the treadmill is located.
If it has tripped, reset or have an electrician replace the breaker in home.
3. If the treadmill will not operate, please call Keys Fitness Customer Service at (888)-340-0482.
Treadmill walking belt slows during use.
1. Check to make sure the treadmill is securely plugged into an UL-listed surge protector, rated at 15 amps,
with a 14-gauge cord of five feet or less and the surge protector is securely plugged into the outlet.
2. If treadmill will not operate, please call Keys Fitness Customer Service at (888)-340-0482.
Treadmill walking belt slips or is not centered on rear roller.
1. Refer to “Belt Adjustment” section.
2. Need help? Call Keys Fitness Customer Service at (888)-340-0482.
Treadmill Error Messages.
Your treadmill is equipped with a software package that enables error messages to be displayed when there is
a problem.
To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill
until the problem is corrected. Call Keys Fitness Customer Service at (888)-340-0482, or see “Error
Messages” on page 22 of this Owner’s Manual.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Exploded View
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts List
Keys 9000LI Treadmill
REF# KEYS PART#DESCRIPTION
QTY.
1
1
24-0279
14-0549
06-0221
06-0219
06-0005
10-0002
10-0057
04-0023
24-0106
09-0026
11-0054
11-0053
06-0238
06-0239
03-0025
04-0041
19-0019
10-0008
21-0161
23-0206
06-0247
06-0245
06-0246
23-0199
12-0032
08-0050
12-0026
CONSOLE ASSEMBLY KEYS9000 SERIES
OVERLAY CONSOLE
2
1
3
HANDGRIP BOTTOM RT CURVED
HANDGRIP TOP RT SPEED CURVED
PLUG-DOME 1.5 - 16GA
2
4
2
5
2
6
ISOLATOR-BOARD 3/4" HARD
ISOLATOR-BOARD 3/4" SOFT
BELT POLY V 260J8
4
7
4
8
1
9
FRONT ROLLER ASSEMBLY
ROLLER REAR 2 1/2 X 21 1/8 2004
ALUM SIDE BOARD LT EXT DECK
ALUM SIDE BOARD RT EXT DECK
END CAP RIGHT ID1 BOSS
END CAP LEFT ID1 BOSS
1
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
1
1
1
1
1
WALKBOARD 20.625 X 55.0625 REVISED
WALKBELT 19.75 X 124.5" 1 PLY OVAL
GUIDE- BELT-GLAVANIZED
FOOT-REAR-KEYS SERIES
INSIDE DRILL 06-0041 BTM PAN
WIDER WHEEL ELEVATION
WHEEL 3 1/2
1
1
2
2
1
1
2
SIDE BOOT RT
1
SIDE BOOT LT
1
SHEET METAL UPRIGHT ASSEMBLY
MOTOR BALDOR 3.0HP-SM9.3P
CONTROLLER
1
1
1
ACTUATOR- 600# BOSS
1
Keys 9000-OB Treadmill
REF# KEYS PART#DESCRIPTION
QTY.
1
24-0279
14-0549
06-0221
06-0219
06-0005
10-0002
10-0057
04-0023
24-0106
09-0027
11-0054
11-0053
06-0238
06-0239
03-0025
04-0039
19-0019
10-0008
21-0161
23-0206
06-0247
06-0245
06-0246
23-0199
12-0032
08-0050
12-0026
CONSOLE ASSEMBLY KEYS9000 SERIES
OVERLAY CONSOLE
1
1
2
2
2
4
4
1
1
1
1
1
1
1
1
1
2
2
1
1
2
1
1
1
1
1
1
2
3
HANDGRIP BOTTOM RT CURVED
HANDGRIP TOP RT SPEED CURVED
PLUG-DOME 1.5 - 16GA
4
5
6
ISOLATOR-BOARD 3/4" HARD
ISOLATOR-BOARD 3/4" SOFT
BELT POLY V 260J8
7
8
9
FRONT ROLLER ASSEMBLY
ROLLER REAR 2.375 09-0026 FOR ORTHO BELT
ALUM SIDE BOARD LT EXT DECK
ALUM SIDE BOARD RT EXT DECK
END CAP RIGHT ID1 BOSS
END CAP LEFT ID1 BOSS
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
WALKBOARD 20.625 X 55.0625 REVISED
WALKBELT 19.75 X 124.5" QUIET ORTHO
GUIDE- BELT-GLAVANIZED
FOOT-REAR-KEYS SERIES
INSIDE DRILL 06-0041 BTM PAN
WIDER WHEEL ELEVATION
WHEEL 3 1/2
SIDE BOOT RT
SIDE BOOT LT
SHEET METAL UPRIGHT ASSEMBLY
MOTOR BALDOR 3.0HP-SM9.3P
CONTROLLER
ACTUATOR- 600# BOSS
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Information
KEYS FITNESS PRODUCTS, LP -
LIMITED WARRANTY
HOME USE WARRANTY:
Frame: Motor:
Lifetime Lifetime
Lifetime 3 Years
Deck & Belt:
5 Years
Parts:
2 Years
1 Year
Labor:
1 Year
1 Year
PRODUCT: KEYS 9000-OB
PRODUCT: KEYS 9000-LI
1 Year
This Limited Warranty applies in the United States and Canada to products manufactured or distributed by Keys Fitness Products,
LP (“Keys”) under the KEYS brand name. The warranty period to the original purchaser is listed above in the table.
Keys warrants that the Product you have purchased for use from Keys or from an authorized Keys reseller is free from defects in
materials or workmanship under normal use during the warranty period. Your sales receipt, showing the date of purchase of the
Product, is your proof of purchase. This warranty only extends to you, the original purchaser. It is not transferable to anyone who
subsequently purchases the Product from you. It excludes expendable parts (wear items). Wear items pertain to components that might
need to be replaced due to normal wear and tear. These items vary per product but will include computer overlays, pedal straps, rope
cords, seats, grips, chains, bottom bracket assemblies, pads, upholstery, pulleys, bearings, etc. Please contact a Keys Fitness cus-
tomer service representative for specifics on wear items. This Limited Warranty becomes VALID ONLY if the product is purchased
through a Keys Fitness authorized dealer unless otherwise authorized by Keys Fitness in writing.
During the warranty period Keys will repair or replace (at Keys' option) the product if it becomes defective, malfunctions, or other-
wise fails to conform with this Limited Warranty under normal use. In repairing the Product, Keys may replace defective parts, or at
the option of Keys, serviceable used parts that are equivalent to new parts in performance. All exchanged parts and Products
replaced under this warranty will become the property of Keys. Keys reserves the right to change manufacturers of any part to cover
any existing warranty.
This warranty DOES NOT COVER shipping charges, export taxes, custom duties and taxes, or any other charges associated with
transportation of the parts or Product.
To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone numbers
located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay
any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or
Product. In addition, you are responsible for insuring any parts or Product shipped or returned. You assume the risk of loss during
shipment. You must present Keys with proof-of-purchase documents (including the date of purchase). Any evidence of alteration,
erasing or forgery of proof-of-purchase documents will be cause to void this Limited Warranty.
This warranty does not extend to any product not purchased from Keys or from an authorized Keys reseller. This Limited Warranty
does not extend to any Product that has been damaged or rendered defective; (a) as a result of accident, misuse, or abuse; (b) by the
use of parts not manufactured or sold by Keys; (c) by modification of the Product or normal wear and tear; (d) operation on incorrect
power supplies; or (e) as a result of service by anyone other than Keys, or an authorized Keys warranty service provider. Product on
which the serial number has been defaced or removed is not eligible for warranty service. Should any Product submitted for warran-
ty service be found ineligible, an estimate of repair cost will be furnished and the repair will be made if requested by you upon Keys'
receipt of payment or acceptable arrangements for payment.
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, KEYS MAKES NO OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR-
POSE. KEYS EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS LIMITED WARRANTY. NEI-
THER KEYS NOR ANY OF ITS AFFILIATES SHALL BE RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAM-
AGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR
EXCLUSION MAY NOT APPLY TO YOU. This Limited Warranty gives you specific legal rights and you may also have other
rights that may vary from state to state. This is the only express warranty applicable to Keys-branded products. Keys neither
assumes nor authorizes anyone to assume for it any other express warranty.
PLEASE SEND IN THE WARRANTY CARD WITHIN TEN (10) DAYS OF PURCHASE TO REGISTER YOUR UNIT WITH
KEYS FITNESS PRODUCTS, LP.
MAIL WARRANTY CARD TO:
KEYS FITNESS PRODUCTS, PO BOX 551239, DALLAS, TX 75355
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Service
(888) 340-0482
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
Download from Www.Somanuals.com. All Manuals Search And Download.
|