JVC Portable CD Player RD T50RLB User Manual

CD PORTABLE SYSTEM  
RD-T70RBU  
RD-T50RLB  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
1
4
2
5
3
6
7
8
9
10  
+10  
REPEAT  
TUNER  
BAND  
CD  
FM MODE  
BASS/TREBLE  
AHB PRO  
VOLUME  
REMOTE CONTROL RM-SRDT7A  
[RD-T70RBU Only]  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial No.  
which are located either on the rear, bot-  
tom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0931-005A  
[B]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
SOME DOS AND DONTS ON THE SAFE USE OF EQUIPMENT”  
This equipment has been disigned and manufactured to meet international safety standards but, like any electrical equipment,  
care must be taken if you are to obtain the best results and safety is to be assured.  
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮  
Do read the operating instructions before you attempt to use the equipment.  
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of  
equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug  
when making or changing connections.  
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
Do be careful with glass panels or doors on equipment.  
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way–switch  
off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended opera-  
tion or has a standby mode.  
Switch off using the switch on the equipment and make sure that your family know how to do this.  
Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic safety. It is  
illegal to watch television whilst driving.  
DON’T listen to headphones at high volume as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer’s  
approved stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -this could result  
in a fatal electrical shock.;  
— NEVER guess or take chances with electrical equipment of any kind  
— it is better to be safe than sorry!  
G-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Thank you for purchasing the JVC CD Portable System.  
We hope it will be a valued addition to your home as well as to your outdoor life, giving you years of enjoyment.  
Be sure to read this instruction manual carefully before operating your new stereo system.  
In it you will find all the information you need to set up and use the system.  
If you have a query that is not answered by the manual, please contact your dealer.  
Features  
Here are some of the things that make your System both powerful and simple to use.  
I The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the music.  
With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, or CD Player with  
a single touch. (When power is supplied from AC)  
I The System incorporates AHB (Active Hyper Bass) PRO circuitry to faithfully reproduce low frequency sounds.  
[RD-T70RBU Only]  
I A 45-station preset capability 30 FM and 15 AM (MW) in addition to auto-seek and manual tuning.  
I A user-friendly timer lets you wake or fall asleep to music.  
I The CD Player can play back a CD-R and CD-RW.  
How This Manual Is Organized  
Basic information that is the same for many different functions - e.g. setting the volume - is given in the section ‘Common Operations’,  
and not repeated under each function.  
The names of buttons/controls are written in all capital letters: e.g. TUNER BAND.  
If the button names on the Unit and the Remote Control are the same, the description on which the button is used will be omitted.  
System functions are written with an initial capital letter only: e.g. Normal Play.  
Use the table of contents to look up specific information you require.  
We’ve enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.  
IMPORTANT CAUTIONS  
1. Where to place the Unit  
I
Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C).  
Leave sufficient distance between the Unit and a TV.  
Do not use the Unit in a place subject to vibrations.  
2. Power cord  
I
Do not handle the power cord with wet hands!  
Some power is always consumed as long as the power cord is connected to the wall outlet.  
When unplugging the Unit from the wall outlet, always pull the plug, not the power cord.  
3. Malfunctions, etc.  
I
There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.  
Do not insert any metallic object into the System.  
I Carefully read “CAUTION” on page G-1.  
I Rating label is placed on the exterior of the bottom.  
Table of Contents  
II  
Features ............................................................................... 1  
How This Manual Is Organized .......................................... 1  
IMPORTANT CAUTIONS ................................................ 1  
Specifications.......................................... Back cover  
Getting Started.......................................................... 2  
Common Operations................................................ 3  
Using the Tuner ........................................................ 5  
Using the CD Player ................................................. 8  
Using the Timers .................................................... 10  
Care And Maintenance........................................... 12  
Troubleshooting ......................................Back cover  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
II  
Accessories  
Check that you have all of the following items, which are supplied with the System.  
Power Cord (1)  
Remote Control (1) [RD-T70RBU Only]  
Batteries for Remote Control (2) [RD-T70RBU Only]  
If any of these items are missing, contact your dealer immediately.  
How To Put Batteries  
How To Put Batteries In the Unit  
1. Open the battery cover on the back of the Unit by pulling it toward you while pressing the tabs as shown by the arrows.  
2. Put 3 memory backup batteries R6P(SUM-3)/AA(15F) (not supplied) in the battery compartment in the order of 1to 3.  
3. Put 6 batteries R20/D (13F) (not supplied) in the battery compartment in the order of 1to 6as shown.  
4. Securely close the battery cover.  
Note: When you operate your Unit on mains (AC) power, the power source switches automatically from batteries to AC. However, you should  
remove the batteries when operating on AC power.  
1
2
2
3
3
5
1
6
4
R6P (SUM-3) / AA (15F)size batteries  
R20/D (13F)size batteries  
How To Put Batteries In the Remote Control [RD-T70RBU Only]  
Match the polarity (+ and ) on the batteries with the + and markings in the battery compartment.  
R6P(SUM-3)/AA(15F)  
CAUTION: Handle batteries properly.  
To avoid battery leakage or explosion:  
Remove batteries when the Unit or the Remote Control will not be used for a long time.  
When you need to replace the batteries, replace batteries at the same time with new ones.  
Do not use an old battery with new ones.  
Do not use different types of batteries together.  
Do not try to recharge non-rechargeable batteries.  
Dispose of batteries in the proper manner, according to federal, state, and local regulations.  
Using the Remote Control [RD-T70RBU Only]  
The Remote Control makes it easy to use many of the functions of the Unit from a distance of up to 7m (23 feet) away.  
You need to point the Remote Control at the remote sensor on the Units front panel.  
Note: If you point the Remote Control from the slant direction, the above distance will be shortened.  
Remote sensor  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the AC Power Cord  
Firmly insert the AC power cord supplied with the System into the AC inlet on the back of the Unit.  
CAUTIONS:  
ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM IN  
ORDER TO AVOID MALFUNCTION OR DAMAGE TO THE SYSTEM.  
BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN  
GOING OUT OR WHEN THE SYSTEM IS NOT IN USE FOR AN EXTEND-  
ED PERIOD OF TIME.  
AC IN  
Plug the AC power cord into the wall outlet, and your System is at your  
command!  
Common Operations  
II  
Display  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
SNOOZE  
/DIMMER  
1
4
2
5
3
6
STANDBY/ON  
7
8
9
MULTIJOG  
CLOCK/DISPLAY  
STANDBY indicator  
VOLUME  
10  
+10  
REPEAT  
VOLUME control  
(Jog dial)  
CD PORTABLE SYSTEM RD-T70R  
STANDBY/ON  
CLOCK/  
DISPLAY  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
TUNER  
BAND  
CD  
AHB PRO  
STANDBY  
BASS/TREBLE  
AHB PRO  
[RD-T70RBU Only]  
FAVORITE  
TIMER  
TIMER1 TIMER2  
STANDBY/ON  
FM MODE  
MULTI CONTROL  
MANUAL/  
PRESET TUNING  
BASS/TREBLE  
AHB PRO  
SNOOZE  
DIMMER  
CD  
TUNER BAND  
AUTO PRESET  
AHB PRO  
VOLUME +, –  
BASS/TREBLE  
VOLUME  
SNOOZE/DIMMER  
[RD-T70RBU]  
SNOOZE  
[RD-T50RLB]  
REMOTE CONTROL RM-SRDT7A  
[RD-T70RBU Only]  
PHONES  
GOOD BYEis displayed and the display becomes blank, except  
for the clock display. The STANDBY indicator lights up.  
Turning the Power On and  
Standby  
I When in Standby mode, the Unit continues to a small amount of  
power to run the display.  
I To switch off the Unit completely, unplug the AC power cord  
from the AC outlet.  
Turning the Unit On ————————  
Press the  
button.  
When power is supplied from the batteries:  
STANDBY/ON  
STANDBY/ON  
When the Unit is turned off with the  
button on the Unit (the  
button on the Remote Control is ineffective), the display be-  
comes blank and the STANDBY indicator lights up.  
or  
STANDBY  
I
To switch off the Unit completely, remove the batteries from the Unit.  
The STANDBY indicator goes out and the display come on, and  
WELCOMEis displayed.  
The Unit comes on ready to continue in the mode it was in when the  
power was last turned off.  
I For example, if the last thing you were doing was listening to a  
CD, you are now ready to listen to a CD again. If you wish, you  
can change to another source.  
I If you were listening to the Tuner last, the Tuner comes on play-  
ing the station it was last set to.  
Adjusting the Volume  
You can adjust the volume level between MIN (0) and MAX (32)  
when the Unit is turned on.  
Turn the VOLUME control on the Unit to the right  
or left to increase or decrease the volume level.  
OR  
Note: When power is supplied from the batteries, the  
button  
Press the VOLUME + or – button on the Re-  
mote Control to increase or decrease the  
volume level.  
on the Remote Control does not work.  
Turning the Unit Standby —————  
Press the  
button again.  
When operating on AC power:  
STANDBY/ON  
STANDBY/ON  
CAUTION: DO NOT turn on the Unit and/or start  
playing any source without first setting the  
VOLUME control to MIN (0) , as a sudden blast of  
sound can damage your hearing.  
or  
STANDBY  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
For private listening  
Adjusting the dimmer level:  
Connect a pair of headphones to the PHONES jack. No sound  
(On the Unit only)  
comes out of the speakers.  
Be sure to turn down the volume before connecting or putting on  
headphones.  
1. With the Unit turned on, press and hold the DIMMER button  
on the Unit until DIMMER:XXappears on the display.  
2. Turn the Jog dial and adjust the dimmer level between 1 and 16.  
3. Press the DIMMER button.  
Reinforcing the Bass Sound  
(AHB PRO) [RD-T70RBU Only]  
When operated on batteries ————  
When the Unit is turned on, you can turn on the backlighting of the  
display for a few seconds.  
Each time you press the SNOOZE/DIMMER button, the backlight  
turns on for a few seconds.  
You can reinforce the bass sound to maintain rich, full bass at low  
volume:  
To get the effect, press the AHB (Active Hyper Bass) PRO button.  
The BASSindicator lights up on the display.  
To cancel the effect, press the button again.  
The BASSindicator goes out.  
Using Batteries  
Power Batteries (6 pcs.):  
You can operate the System on batteries. When the batteries are  
exhausted, NO BATTwill appear on the display. In this case, re-  
place with the new batteries.  
Tone Control (BASS/TREBLE)  
You can control the tone by changing the bass and treble.  
Memory Backup Batteries (3 pcs.):  
Your settings such as the preset stations, clock and timer are backed  
up with this batteries.  
1. Press the BASS/TREBLE button until BASS”  
Ior TREBLEappears on the display.  
Each time you press the button, the display changes as follows:  
BASS =TREBLE =original display =(back to the beginning)  
CAUTION:  
If memory backup batteries are exhausted or not  
installed, and the AC power cord is disconnected  
or there is a power failure, the settings you have  
made will be erased from memory in approx. half  
a day.  
2. Turn the Jog dial on the Unit or press the  
IVOLUME +/button on the Remote Control  
to adjust the level.  
The bass or treble level changes between 6 and +6. (0: Flat)  
To exit the tone control mode, press the BASS/TREBLE but-  
ton until the original display appears, or wait for 15 seconds.  
To forcibly reset the bass and treble levels to 0 (FLAT),  
press the BASS/TREBLE button for 2 seconds or more.  
Showing the Time (CLOCK/  
DISPLAY)  
While listening to a CD or the radio, you can see the current time.  
To display the clock, press the CLOCK/DISPLAY button on the  
Unit.  
To return to the original display, press the same button until  
the original display appears.  
Note: You need to set the clock first in order for it to work. (See  
Setting the Clockon page 10.)  
Adjusting the Brightness  
(DIMMER) [RD-T70RBU Only]  
When operated on AC power ———  
You can switch the brightness of the displays backlighting (full  
light and dimmed light). In addition, the dimmed backlighting  
brightness can be changed in 16 steps.  
When the Unit is turned on:  
Each time you press the SNOOZE/DIMMER button, the backlight  
fully turns on or dims.  
When the Unit is turned off (Standby):  
Each time you press the SNOOZE/DIMMER button, the backlight  
dims or turns off.  
When the Sleep Timer is on:  
You can also dim or turn off the backlight with the SNOOZE/DIM-  
MER button.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Tuner  
II  
SNOOZE  
/DIMMER  
MULTIJOG  
SLEEP  
STANDBY/ON  
VOLUME  
1
4
2
5
3
6
CD PORTABLE SYSTEM RD-T70R  
STANDBY/ON  
CLOCK/  
DISPLAY  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
AHB PRO  
I
MANUAL/PRE-  
STANDBY  
FAVORITE  
TIMER  
TIMER1 TIMER2  
SET TUNING  
CLOCK/DISPLAY  
Number keys  
7
8
9
MULTI CONTROL  
¢
4
MANUAL/  
PRESET TUNING  
10  
+10  
REPEAT  
SNOOZE  
DIMMER  
CD  
TUNER BAND  
AUTO PRESET  
TUNER  
BAND  
CD  
TUNING BAND  
AUTO PRESET  
TUNER BAND  
FM MODE  
4
¢
BASS/TREBLE  
AHB PRO  
Band display, Frequency display, Preset channel  
RDS indicator  
VOLUME  
REMOTE CONTROL RM-SRDT7A  
[RD-T70RBU Only]  
(Display when using the Tuner)  
You can listen to FM and AM (MW) stations. Stations can be tuned  
in manually, automatically, or from preset memory storage.  
3. Select a station using one of the following  
Imethods.  
Note that the possible operation is limited by the Tuning mode  
you have selected in step 2.  
I Manual Tuning (In Manual Tuning mode)  
Press the 4or ¢button repeatedly to move from frequency  
to frequency until you find the station you want.  
Setting the Antenna  
For FM reception:  
Extend the built-in wire antenna to obtain the best reception.  
MULTI CONTROL  
MANUAL/  
PRESET TUNING  
or  
OR  
I Auto Tuning (In Manual Tuning mode)  
If you press and hold the 4or ¢button for one second or  
more, the frequency changes down, or up, automatically until a  
station is found.  
For AM reception:  
Turn the Unit to obtain the best reception.  
OR  
I Preset Tuning using the Unit (Possible only after pre-  
setting stations) (In Preset Tuning mode)  
Press the 4or ¢button to select the preset station.  
After you have selected the preset number, the band and the fre-  
quency are displayed.  
One Touch Radio (AC power only)—  
Just press the TUNER BAND button to turn on the Unit and start  
playing the station you were last tuned to.  
I You can also switch from the CD Player to the radio by pressing  
the TUNER BAND button.  
Example:Press the 4or ¢button until the preset num-  
ber 12 P- 12appears.  
Tuning In a Station  
1. Press the TUNER BAND button.  
I
OR  
The Band and Frequency you were last tuned to appear on the  
display.  
Each time you press the button, the band changes as follows:  
I Preset Tuning using the Remote Control (Possible  
only after presetting stations)  
Select the station by entering its preset number on the number  
keys.  
FM AUTO  
FM MONO  
AM  
Example:For channel 5, press 5. For channel 15, press +10  
then 5. For channel 25, press +10 twice, then 5.  
For channel 30, press +10 twice, then 10.  
2. Press the 7button on the Unit to select the  
Ituning mode (Manual or Preset).  
The band and the frequency are displayed.  
Each time you press the button, the tuning mode changes as fol-  
lows:  
MANUAL (Manual Tuning mode) ÔPRESET (Preset Tuning  
mode)  
MULTI CONTROL  
MAAL/  
PRESEUNING  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Manual Presetting (Using the Re-  
Presetting Stations  
mote Control) [RD-T70RBU Only] ——  
You can preset up to 30 FM stations and up to 15 AM (MW) stations  
into memory.  
TUNER  
BAND  
Number key(s)  
(hold for 2 seconds)  
MAAL/  
PRESEUNING  
Auto Presetting (Using the Unit) —  
In each band, you can automatically preset FM-30, AM (MW)-15 sta-  
tions. Preset numbers will be allocated as stations are found, starting  
from the station currently tuned to and moving up the frequency.  
(On the Unit)  
1. Select a band by pressing the TUNER  
IBAND button.  
(Band select)  
(Auto preset)  
(for 2 seconds)  
TUNER BAND  
AUTO ESET  
TUNER BAND  
AUTO SET  
2.Press the 7button on the Unit until MAN-  
IUAL (Manual Tuning mode)appears on the  
display.  
4
¢
3. Press the  
or  
button to tune in a station.  
I
1. Select a band (AM or FM) by pressing the  
ITUNER BAND button.  
4. Set the preset number by pressing and hold-  
Iing the number key on the Remote Control  
2. Press the TUNER BAND button for more  
Ithan 2 seconds.  
until STOREDappears on the display.  
To preset numbers 1 to 10: Press the number key and hold  
it down for 2 seconds.  
AUTOappears, and then auto presetting starts.  
To preset numbers 11 to 19: Press the +10 button, then  
press the second number key (1 to 9) and hold it down for 2  
seconds.  
To preset numbers 21 to 29: Press the +10 button twice,  
then press the second number key (1 to 9) and hold it down  
for 2 seconds.  
3. Repeat steps 1-2 for the other band.  
I
I If you want to change any of the auto preset stations, follow the  
procedure for Manual Presetting.  
CAUTION: To prevent the preset stations from being  
erased because of a power failure, etc., install mem-  
ory backup batteries in the System.(See page 2.)  
Otherwise, they will be erased in approx. half a day.  
To preset number 30: Press the +10 button twice, then press  
and hold 10 button.  
Example: Preset number = 12  
Manual Presetting (Using the Unit) —  
(Station Select)  
MULTI CONTROL  
TUNER BAND  
AUTO ESET  
MANUAL/  
MAAL/  
PRESET TUNING  
PRESEUNING  
5. Repeat steps 2 - 4 for further presetting.  
To change the preset stations, repeat the same steps as above.  
I
(
Preset No. Select  
)
(Press & hold )  
(for 2 sec)  
MULTI CONTROL  
MAAL/  
MAAL/  
MANUAL/  
PRESET TUNING  
To Change the FM  
Reception Mode  
PRESENING  
PRESEUNING  
The STEREOindicator lights up and you can hear stereo effects,  
when a program is broadcast in stereo.  
1. Select a band by pressing the TUNER  
IBAND button.  
However if an FM stereo broadcast is hard to receive or noisy, you  
can select Monaural mode. Reception improves, but you lose any  
stereo effect.  
2. Press the 7button until MANUAL (Manual  
ITuning mode)appears on the display.  
Press the TUNER BAND button to select FM  
MONO mode.  
3. Press the 4or ¢button to tune in a sta-  
Ition.  
The MONOindicator lights up on the display.  
To restore the stereo effect, press the TUNER BAND button  
to select FM Auto mode. The MONOindicator goes out.  
4. Press the 7button for 2 seconds or more.  
I
The preset number and band/frequency are alternately  
displayed for 5 seconds.  
5. Within 5 seconds, repeatedly press the 4or  
I
¢button until the preset number you want  
appears, then press and hold the 7button  
until STOREDappears on the display.  
6. Repeat steps 2-5 for further presetting.  
I
To change the preset stations, repeat the same procedure as  
above.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PS (Program Service):  
Receiving FM Stations with  
RDS  
While searching, WAIT PSand PSalternately appear on the  
display. Then, the RDS indicator lights up and the station name ap-  
pears. NO PSappears if no signal is sent.  
You can use the RDS (Radio Data System) by using the CLOCK/  
DISPLAY button on the Unit.  
Clock:  
Current time appears on the display.  
Station Frequency:  
Station frequency (non-RDS service)  
RDS allows FM stations to send additional signals with their regular  
program signals. For example, the stations send their station names,  
and information about what type of program they broadcast, such as  
sports or music, etc. However, this unit can only receive the follow-  
ing type of RDS signal:  
PS (Program Service):  
shows commonly known station names.  
Notes:  
If searching finishes at once, WAIT PSand PSwill not ap-  
pear on the display.  
RDS is not available for AM (MW) broadcasts.  
To show the RDS signals on the  
On characters displayed  
When the display shows PS signals:  
The display shows upper case letters only.  
The display cannot show accented letters; For example, Amay  
represent accented Aslike “Á, Â, Ã, À, Ä and Å”.  
display ———————————————  
Press the CLOCK/DISPLAY button on the Unit while lis-  
tening to an FM station.  
Each time you press the button, the display changes to show infor-  
mation in the following order:  
CLOCK/  
DISPLAY  
PS  
Clock  
Frequency  
[Example of characters displayed]  
!
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the CD Player  
II  
CD cover  
(including the display)  
SNOOZE  
SLEEP  
/DIMMER  
STANDBY/ON  
1
4
2
5
3
6
MULTIJOG  
VOLUME  
Number keys  
REPEAT  
7
8
9
CD PORTABLE SYSTEM RD-T70R  
STANDBY/ON  
CLOCK/  
DISPLAY  
Jog dial  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
SLEEP  
AHB PRO  
10  
+10  
REPEAT  
STANDBY  
FAVORITE  
TIMER  
TIMER1 TIMER2  
7
TUNER  
BAND  
CD  
MULTI CONTROL  
¢
4
MANUAL/  
CD 38  
¢
PRESET TUNING  
FM MODE  
SNOOZE  
DIMMER  
CD  
TUNER BAND  
AUTO PRESET  
BASS/TREBLE  
AHB PRO  
CD 38  
7
4
VOLUME  
0(CD OPEN/CLOSE)  
Playing time, Preset number  
Track number  
REMOTE CONTROL RM-SRDT7A  
[RD-T70RBU only]  
Random/Repeat indicator  
(Display when using the CD Player)  
You can use Normal, Random, or Repeat Play. Repeat Play can be  
set to repeat all or just one of the tracks on the CD.  
4. Press the CD 38 button.  
The first track of the CD begins playing.  
I
The CD Player automatically stops when the last track of the CD has  
finished playing.  
One Touch CD Player  
(AC power only) ——————————  
During playback, the track number being played and the play-  
back time elapsed are shown on the display.  
Track number  
I Just press the CD 38button.  
The power is automatically turned on. If a CD is already  
inserted, CDis displayed and the CD will start playing  
from the first track.  
If no CD is inserted, NO DISCis displayed on the dis-  
play and the CD Player remains in Stop mode.  
Playback time elapsed  
To stop playing the CD, press the 7button.  
The following information for the CD is displayed.  
Total number of tracks  
Normal Play  
1. Press the 0button on the Unit.  
I
The CD cover (including the display) opens.  
2. Place a CD, with its label side up.  
I
Total playback time  
To pause, press the CD 38.  
To cancel pause, press the CD 38 again. Play continues from  
the point where it was paused.  
Notes:  
You can place an 8 cm (3'') CD without an adaptor.  
If the CD cannot be read correctly (because it is scratched, for  
example), 0 0:00appears on the display.  
Skip Play (4 or ¢) ————————  
During playback, press the 4or ¢button to select the  
track you want.  
3. Press the 0button again to close the CD  
Icover.  
The selected track starts playing.  
To close the CD cover and directly start playback, omit this  
Press the ¢button to go forward one track at a time.  
Press the 4button to go back to the beginning of the current  
track. To go back to the previous track, quickly press the 4  
button twice.  
step and go to the next step.  
CAUTION: Avoid getting your hand caught in the  
CD cover.  
I You can also skip the tracks in Stop mode.  
Search Play —————————————  
During playback, hold down the 4 or ¢ button.  
This operation will fast forward/backwards the CD so you can  
quickly find a particular passage in the track you are listening to (the  
CD playback speed will increase in two steps).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating a Track directly with the  
Remote Control ——————————  
Using the number keys on the Remote Control, you can go directly  
to the beginning of any track.  
During playback, enter the number of the track you want  
to listen to using the number keys.  
The selected track starts playing.  
2.Press the CD 38 button.  
I
Repeat playback starts.  
To stop Repeat Play, press the I button.  
To cancel Repeat Play mode, in Stop mode, press the REPEAT  
button until the Repeat indicator goes out, or press the I button.  
Pressing the 0button to open the CD cover will also cancel Repeat  
Play mode.  
Example: For track 5, press 5. For track 15, press +10, then 5.  
For track 20, press +10, then 10. For track 32, press +10 three  
times, then 2.  
RANDOM Play  
The tracks will play in no special order when you use this mode.  
(On the Unit)  
1. In Stop mode, press the RANDOM/REPEAT  
Ibutton until the RANDOMindicator alone  
lights up on the display.  
Each time you press the button, the Random/Repeat indicator  
changes as follows.  
P =P ALL =P RANDOM = RANDOM (Random  
Play mode) =blank display =(back to the beginning)  
2. Press the CD 38 button.  
I
All the tracks are played back in random order once, then the  
CD stops.  
During playback, skip play and search play can be done in the  
similar manner as for Normal Play mode, using the 4or ¢  
button.  
To stop Random Play, press the I button.  
To cancel Random Play mode, in Stop mode, press the RAN-  
DOM/REPEAT button until the RANDOMindicator goes out, or  
press the I button. Pressing the 0button to open the CD cover will  
also cancel Random Play mode.  
Repeat Play  
One track or all the tracks on a CD will play repeatedly when you  
use this mode.  
(On the Unit)  
1. In Stop mode, press the RANDOM/REPEAT  
Ibutton.  
Each time you press the button, the Random/Repeat indicator  
changes as follows.  
P = P ALL = P RANDOM = RANDOM = blank  
display =(back to the beginning)  
P :  
Will repeat one track.  
P ALL:  
P RANDOM:  
Will repeat all the tracks.  
Will repeat all the tracks in random order.  
2. Press the CD 38 button.  
I
Repeat playback starts.  
To stop Repeat Play, press the I button.  
To cancel Repeat Play mode, in Stop mode, press the RAN-  
DOM/REPEAT button until the Random/Repeat indicator goes out,  
or press the I button. Pressing the 0button to open the CD cover  
will also cancel Repeat Play mode.  
(On the Remote Control) [RD-T70RBU Only]  
1. In Stop mode, press the REPEAT button.  
I
Each time you press the button, the Repeat indicator changes as  
follows.  
P = P ALL =blank display =(back to the beginning)  
P :  
Will repeat one track.  
P ALL: Will repeat all the tracks.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timers  
II  
SNOOZE  
/DIMMER  
SNOOZE  
/DIMMER  
SLEEP  
STANDBY/ON  
SLEEP  
1
4
2
5
3
6
7
8
9
MULTIJOG  
VOLUME  
SLEEP  
10  
+10  
REPEAT  
CD PORTABLE SYSTEM RD-T70R  
STANDBY/ON  
CLOCK/  
TUNER  
BAND  
CD  
Jog dial  
RANDOM/  
REPEAT  
BASS/  
TREBLE  
DISPLAY  
SLEEP  
AHB PRO  
STANDBY  
FAVORITE  
TIMER  
TIMER1 TIMER2  
CLOCK/DISPLAY  
TIMER 1  
FM MODE  
MULTI CONTROL  
MANUAL/  
PRESET TUNING  
BASS/TREBLE  
AHB PRO  
TIMER 2  
SNOOZE  
DIMMER  
CD  
TUNER BAND  
AUTO PRESET  
VOLUME  
SNOOZE/DIMMER  
[RD-T70RBU]  
SNOOZE  
REMOTE CONTROL RM-SRDT7A  
Timer 2 indicator  
Timer 1 indicator  
[RD-T50RLB]  
SLEEP indicator  
[RD-T70RBU Only]  
(Display when using the Timer)  
You can enjoy timer settings with the unique dual timer, consisting  
of the Timer 1 and Timer 2. These Timers can independently select  
a playback source from the CD player (Normal Play or Random  
Play), Tuner, or 8 melodies. For example, you can make up to a mel-  
ody every morning with the Timer 1, and without changing the Tim-  
er 1 setting, you can listen to the favorite program by reserving it  
with the Timer 2. Also, you can use the Sleep Timer to fall asleep  
to music. Your System automatically turns off after a certain length  
of time.  
3. Press the CLOCK/DISPLAY button.  
I
The minute digits blink.  
4. Turn the Jog dial to set the minute.  
I
5. Press the CLOCK/DISPLAY button.  
I
CLOCK OKappears for 2 seconds. The selected time is set  
and the seconds start counting from 0.  
Setting the Timer  
CAUTION: If memory backup batteries are ex-  
hausted or not installed, and the AC power cord is  
disconnected or there is a power failure, time set-  
tings will be erased from memory in approx. half  
a day. Then, the display blinks 0:00. If this hap-  
pens, set the current time (clock) and perform the  
timer setting again.  
The Timer 1 or Timer 2 is turned on at the set time and the System  
turns on. The selected source is played and the volume fades in. The  
System will automatically turn off in 1 hour.  
The setting procedure for the Timer 1 and Timer 2 is identical.  
Notes:  
Perform each setting step within 30 seconds. Otherwise, setting is  
cleared and the procedure must be repeated from the beginning.  
Tuner timer uses the preset station. So, you need to preset the sta-  
tions in Preset Tuning mode beforehand. See, Presetting Sta-  
tionson page 6.  
Setting the Clock  
When the Unit is operated on AC power or batteries for the first  
time, the time indication 0:00will blink on the display and you  
need to set the clock.  
(On the Unit: While the Unit is turned on)  
You can set the clock whether the Unit is turned on or off (Standby)  
if the AC power is supplied to the Unit.  
Notes:  
The clock must be correctly set for the timer to work.  
The clock may gain or lose 1 to 2 minutes per month.  
Perform each setting step within 30 seconds. Otherwise, setting is  
cleared and the procedure must be repeated from the beginning.  
1. Press the TIMER1 or TIMER2 (we write as  
ITIMER1/2 hereafter) button.  
The current hour digits blink. Also, the Timer 1/2 indicator  
(
TIMER1/2) blinks.  
Note:  
If the clock is not set yet, CLOCK SETis displayed and the  
Unit enters the clock setting mode. In this case, set the clock  
referring to Setting the Clockon this page.  
MULTIJOG  
MULTIJOG  
VOLUME  
VOLUME  
CLOCK/  
CLOCK/  
CLOCK/  
DISPLAY  
DISPLAY  
DISPLAY  
2. Turn the Jog dial to select the hour.  
I
3. Press the TIMER1/2 button.  
I
(for 3 sec)  
The current minute digits blink.  
(On the Unit)  
4. Turn the Jog dial to select the minute.  
I
1. Press the CLOCK/DISPLAY button for 3 sec-  
Ionds or more.  
5. Press the TIMER1/2 button.  
I
The current source name blinks.  
The hour digits blink.  
2. Turn the Jog dial to set the hour.  
I
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To cancel the timer, press the TIMER1/2 button to turn off the  
Timer 1/2 indicator ( TIMER1/2).  
To reactivate the timer, repeatedly press the TIMER1/2 button  
until the Timer 1/2 indicator ( TIMER1/2) remains lit again.  
6. Turn the Jog dial to select the source.  
I
The source name changes as follows:  
CD  
TUNER  
MELODY  
To confirm the timer settings, repeatedly press the TIMER1/2  
button.  
To change the timer settings, repeat the setting procedure  
from the beginning.  
7. Press the TIMER1/2 button and select a  
Isource item you want.  
When the source is CD:  
Tip:  
1. Turn the Jog dial to select either TRACK NO(for  
The timer works even if the Unit is turned on. So, while listening to  
a CD or radio, you can use the timer to know the set time. For ex-  
ample, if you are listening to the radio, you can set the timer so that  
the melody will be played at the set time, instead of the radio. In this  
case, the playback sound slowly fades in.  
Normal Play) or RANDOM(for Random Play).  
2. Press the TIMER1/2 button.  
When TRACK NOis selected, TRACK- 1blinks.  
Go to steps 3 and 4.  
When RANDOMis selected, the current volume lev-  
5-Minute Snoozing (SNOOZE)  
el blinks. Go to step  
(When TRACK- 1blinks.)  
.
8
When the Timer 1/2 turns on, if you wish, you can activate 5-minute  
snoozing function to temporarily stop playing source.  
While the timer is activating, press the  
SNOOZE button.  
3. Turn the Jog dial to select another track, if you want.  
4. Press the TIMER1/2 button.  
The current volume level blinks. Go to step  
.
8
The Unit turns off for 5-minute for snoozing. (The Timer 1/2 blinks.)  
Notes:  
Pressing and holding the SNOOZE button for more than 2 seconds  
cancels the timer.  
The maximum number of times to repeat snoozing is limited to 10.  
Snooze function does not work when the other timer is used.  
When the source is TUNER:  
1. Turn the Jog dial to select FM AUTO, FM MONO, or  
AM.  
2. Press the TIMER1/2 button.  
The preset number blinks. (e.g. P-1)  
3. Turn the Jog dial to select the preset number you want  
to listen to.  
Setting the SLEEP Timer  
Use the Sleep Timer to turn the Unit off after a certain number of  
minutes when it is playing. By setting the Sleep Timer, you can fall  
asleep to music and know that your Unit will turn off by itself rather  
than play all night.  
4. Press the TIMER1/2 button.  
The current volume level blinks. Go to step  
.
8
When the source is MELODY:  
The current melody number (1 - 8) blinks and the melody is  
I You can only set the Sleep Timer when the Unit is on and a  
source is playing.  
played.  
1. Turn the Jog dial to select one of melodies.  
1. Play back a CD or tune in to a desired sta-  
Ition.  
2. Press the TIMER1/2 button.  
The current volume level blinks. Go to step  
.
8
2. Press the SLEEP button.  
I
8.Turn the Jog dial to set the volume level.  
I
The SLEEPindicator blinks.  
The volume level changes between MIN (0)and MAX  
(32).  
3. Set the length of time you want the source  
Ito play before shutting off.  
9. Press the TIMER1/2 button.  
I
Each time you press the SLEEP button, it changes the num-  
The TIMER1/2 is set and the Timer 1/2 indicator  
ber of minutes shown on the display in this sequence:  
10 =20 =30 =60 =90 =120 =Cancelled =(back to  
the beginning)  
(
TIMER1/2) remains lit.  
10  
. Prepare the music source according to the  
Isource set in step 6.  
The SLEEPindicator will stop blinking after 5 seconds and re-  
mains on (The backlight dims.). Then, the display returns to the one  
before you set the Sleep Timer.  
The Unit is now set to turn off after the number of minutes you have  
set.  
CD: Load a CD.  
TUNER/MELODY:No preparation is necessary.  
If no CD is loaded with the CD source selected, the MEL-  
ODY 1 will be activated instead of a CD.  
To Confirm the Sleep Time  
Press the SLEEP button once. The remaining sleep time is dis-  
played, and after 5 seconds, the original display returns.  
11. Turn off the Unit (Standby mode).  
I
When the set time comes —————  
To Cancel the SLEEP Timer Setting  
Press the SLEEP button until the SLEEPindicator goes off on the  
display. Turning off the Unit also cancels the SLEEP Timer.  
When the set time comes, the Unit automatically turn on and plays  
the source. During this time, the Timer 1/2 indicator (  
Timer 1/2)  
blinks. The timer will automatically turn off in 1 hour. In case that the  
source is CD, the Unit automatically turns off when playing back all  
the tracks is finished.  
To temporarily cancel the timer, press the TIMER 1/2 but-  
ton once or change the volume with the VOLUME control  
on the Unit or the VOLUME +/- button on the Remote  
Control. Then the Timer 1/2 indicator (  
TIMER 1/2)  
remains lit. (When the source is CD or TUNER, pressing  
any button on the Unit cancels the timer.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care And Maintenance  
II  
Compact Discs  
Handle your CDs carefully, and they will last a long time.  
Only CDs bearing these marks can be played  
with this Unit.  
Recordable  
ReWritable  
Continued use of irregularly shaped CDs  
(heart-shape, octagonal, etc.) can damage the  
Unit.  
Remove the CD from its case by holding it at  
the edges while pressing the case's center hole  
lightly.  
Do not touch the shiny surface of the CD, or  
bend the CD.  
Put the CD back in its case after use to prevent  
warping.  
Be careful not to scratch the surface of the CD  
when placing it back in the case.  
Avoid exposure to direct sunlight, temperature  
extremes, and moisture.  
A dirty CD may not play correctly. If a CD is  
dirty, wipe it with a soft cloth in a straight line  
from center to edge.  
CAUTION: Do not use any solvent (for example,  
conventional record cleaner, spray thinner, ben-  
zine, etc.) to clean a CD.  
Moisture Condensation  
Moisture may condense on the lens inside the Unit in the following  
cases:  
After turning on heating in the room.  
In a damp room.  
If the Unit is brought directly from a cold to a warm place.  
Should this occur, the Unit may malfunction. If this happens, leave  
it turned on for a few hours until the moisture evaporates, unplug the  
AC power cord, and then plug it in again.  
General Notes  
To ensure top performance, keep your CDs and the mechanism clean.  
Store CDs in their cases, and keep them in cabinets or on  
shelves.  
Keep the CD cover closed when not in use.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you have a problem with your System, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as your  
dealer, for service.  
II  
Symptom  
Possible Cause  
Action  
Connect it firmly  
No sound is heard.  
The power cord is disconnected.  
The batteries in the Unit have lost  
their charge.  
Replace the batteries.  
Headphones are connected.  
Disconnect the headphones.  
Poor AM reception  
Poor FM reception  
The System is not properly positioned.  
Turn the System to the best reception  
position.  
The FM antenna is not properly posi-  
tioned.  
Extend the FM antenna and turn it to the  
best reception position.  
The CD skips.  
The CD is dirty or scratched.  
Clean or replace the CD.  
The CD does not play.  
The CD is upside down.  
Put the CD in with the label side up.  
Preset tuning is not possible with the  
4/¢key.  
Manual Tuning mode is selected.  
Press the I button on the Unit until  
PRESETis displayed.  
Manual tuning is not possible with the  
4/¢key.  
Preset Tuning mode is selected.  
Press the I button on the Unit until  
MANUALis displayed.  
Unable to operate the Remote Control.  
The path between the Remote Control  
and the sensor on the Unit is blocked.  
The batteries have lost their charge.  
Remove the obstruction.  
Replace the batteries.  
Operations are disabled.  
The built-in microprocessor has malfunc-  
tioned due to external electrical interference.  
Unplug the Unit then plug it back in.  
Specifications  
Amplifier  
Output Power  
(Max.) 5 W (2.5 W + 2.5 W) at 4 ohms  
(10% THD) 4 W (2 W + 2 W) at 4 ohms  
Output Sensitivity/Impedance (1 kHz)  
Phones 32 ohms - 1 kohm  
0 mW - 20 mW/ch output into 32 ohms  
II  
Speakers  
8 cm 2, 4 ohms  
General  
Dimensions 438 mm 175.5 mm 261.5 mm  
(W/H/D)  
Mass Approx. 2.5 kg (without batteries)  
Accessories  
CD Player  
Power Cord (1)  
Remote Control (RM-SRDT7) (1)  
[RD-T70RBU Only]  
Signal-To-Noise Ratio 90 dB  
Wow And Flutter Unmeasurable  
Batteries for Remote Control R6 (SUM-3)  
/AA (15F) (2) [RD-T70RBU Only]  
Tuner  
FM Tuner  
Tuning Range 87.5 MHz - 108.0 MHz  
AM Tuner  
Tuning Range (MW) 522 kHz - 1,629 kHz  
Antenna Built-in wire antenna for FM  
Built-in ferrite core antenna for AM  
Power Specifications  
Power Requirements AC 230 V ~ , 50 Hz  
Power Consumption 10 watts (power on mode)  
1.8 watts (in Standby mode)  
Design and specifications are subject to change without notice.  
VICTOR COMPANY OF JAPAN, LIMITED  
EN  
0402HMOCREHIT  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Dishwasher DI 62 User Manual
Infinity Speaker TSS SAT1200 User Manual
Invacare Wheelchair IMX1 User Manual
Jonsered Chainsaw SM 2055 E User Manual
Jura Capresso Coffeemaker GIGA X7c Professional User Manual
JVC Flat Panel Television LV42740 001A User Manual
Kenmore Water System 6253835 User Manual
Kenwood Home Theater System AVS 1003B User Manual
KitchenAid Food Processor KFP1642 User Manual
Kramer Electronics Car Amplifier VP 200Dxl User Manual