COMPACT Hi-Fi COMPONENT SYSTEM
M-303USB
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
B60-5691-08/00 (E, X)
Download from Www.Somanuals.com. All Manuals Search And Download.
I
14.Replacement Parts – When replacement parts
are required, be sure the service technician has used
replacement parts specified by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other
hazards.
6. Power Sources – This product should be operated
only from the type of power source indicated on the
product. If you are not sure of the type of power supply
to your home, consult your product dealer or local power
company.
7.
– Polarization – This product may
CAUTION
15.Safety Check – Upon completion of any service
or repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
be equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
16.Wall or Ceiling Mounting – This product should
be mounted to a wall or ceiling only as recommended
by the manufacturer.
17.Heat – This product should be situated away from
heat sources such as radiators, heat registers, stoves,
or other products that produce heat. Do not place a
flaming object, such as a candle or lantern, or near the
product.
8. Power Cord Protection – Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
18.Power Lines – An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
9. Lightning – For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to
lightning and power-line surges.
19.Outdoor Antenna Grounding – If an outside
antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so
as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with
regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
10.Overloading – Do not overload wall outlets,
extension cords, or integral convenience receptacles as
this can result in a risk of fire or electric shock.
11.Object and Liquid Entry – Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out parts
that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
12.Servicing – Do not attempt to service this product
yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
13.Damage Requiring Service – Unplug this product
from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
ANTENNA
LEAD IN WIRE
GROUND CLAMPS
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
EQUIPMENT
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions.
(NEC SECTION 810-21)
GROUND CLAMP
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
e) If the product has been dropped or damaged in
NEC – NATIONAL ELECTRICAL CODE
any way, and
f) When the product exhibits a distinct change in
performance – this indicates a need for service.
g) If an abnormal smell or smoke is detected.
Notes:
1. Item 7 is not required except for grounded or
polarized equipment.
2. Item 19 complies with UL in the U.S.A.
EN3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
General information.....................................21
Contents
Maintenance...............................................................................21
Caution : Read the pages marked ¤ carefully to
In case of difficulty........................................22
Specifications................................................23
ensure safe operation.
¤Before applying power..............................2
¤Safety precautions...............................................................2
¤IMPORTANT SAFETY INSTRUCTIONS........2
Unpacking .......................................................................................4
Connections...................................................................................5
Preparing the remote control unit ...................................5
Unpacking
Unpack the unit carefully and make sure that all
accessories are present.
About MP3 and WMA .....................................6
About USB device ...........................................7
Description of the button name in this
manual.........................................................7
AM loop antenna..................................................................................(1)
Remote control unit............................................................................(1)
Battery (AAA/R3)...................................................................................(2)
Names and functions of parts .......................8
If any accessories are missing, or if the unit is damaged of
falls to operate, notify your dealer immediately. If your unit
was shipped to you directly, notify your shipper immediately.
Kenwood recommend that you retain the original carton and
packing materials in case you need to move or ship the unit in
the future.
Basic function ...............................................10
Demonstration mode............................................................10
Switching the system on.....................................................10
Switching the system to standby mode....................10
Volume control..........................................................................10
Sound control.............................................................................10
Headphones................................................................................10
Keep this manual handy for future reference.
Using the CD/MP3-CD/WMA-CD/
USB device.................................................11
Preparation...................................................................................11
Playing a disc/USB device...................................................11
Selecting a desired track/passage.................................11
Selecting a desired album/file
(For audio file only) .........................................................12
Programming tracks...............................................................12
Programming files (For audio file only) ......................13
Random play...............................................................................13
Repeat play...................................................................................13
Intro scan.......................................................................................14
Changing the display of the disc/
USB device information................................................14
Using the radio .............................................15
Tuning in radio stations........................................................15
Storing preset.............................................................................15
Tuning to a preset radio station......................................15
Using RDS (Radio Data System).......................................15
Changing the RDS display information......................16
Tuning by Program TYpe (PTY search)........................16
Using the cassette.........................................17
Playing a cassette tape..........................................................17
Recording on a cassette tape...........................................17
Clock/timer operation..................................19
View clock.....................................................................................19
Clock setting................................................................................19
Timer setting...............................................................................19
To activate/deactivate the timer.....................................20
Sleep timer setting..................................................................20
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Before applying power
Connections
Preparing the remote control unit
Connecting the AM antenna
Operation
Set up the AM loop antenna, and then connect it to
AM ANT terminal on the back.
Place the antenna where AM broadcast can be
received.
When the power cord is plugged in, standby
indicator is lit. The power turns ON by pressing
button on the remote control unit pointing at the
remote sensor. When the power comes on, press the
button you want to operate.
For the FM antenna
Adjust the position of the FM antenna for the best
reception and fix it.
⁄
•
•
•
The supplied battery may have shorter live than ordinary
battery due to use during operation checks.
When the remote-controllable distance gets shorter than
before, replace the battery with a new one.
Placing the remote sensor in direct sunlight, or in direct
light from a high frequency fluorescent lamp may cause a
malfunction.
Speakers connection
1
Connect the right speaker to terminal marked
“R”, with the red wire to + and the black wire to
–.
In such a case, change the location of the system installation
to prevent malfunction.
2
Connect the left speaker to terminal marked “L”,
with the red wire to + and the black wire to –.
Loading batteries
Use two “AAA”/“R3”-size batteries.
Clip the stripped portion of the speaker wire as
shown.
1
2
3
Remove the cover.
Insert batteries.
Close the cover.
⁄
•
For optimal sound performance, it is recommended to use
the supplied speakers.
•
Do not connect more than one speaker to any one pair of
+/– speaker terminals.
¤
CAUTION
Be sure to adhere to the following, or proper
ventilation will be blocked causing damage or
fire hazard.
•
Do not place any objects impairing heat radiation onto
the top of the unit.
•
Leave some space around the unit (from the largest
outside dimension including projection) equal to or
greater than, shown below.
¤
CAUTION
For Main Plug : Mains plug is used as the disconnect
device. It shall remain readily, operable and should not be
obstructed during intended use.
Top panel : 50 cm Back panel : 10 cm
EN5
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3 and WMA
The playable MP3/WMA file (hereafter called
Audio file) and the media format has the following
limitation. The Audio file, which is not conforming to
the specification, may not play normally, or the file
and folder names may not display correctly.
The maximum number of characters for
display
•
•
File/Folder name: 30/30 characters
MP3 ID3 Tag/ WMA Contents property:
30 characters
(The information which can be displayed with this unit:
title, artist name, and album name)
Playable Audio file : MP3, WMA
⁄
⁄
•
File/Folder name is the number of the characters including
•
Attach the correct extension for the Audio file. (MP3:“.MP3”,
WMA:“.WMA”)
the extensions.
•
This unit can display the following versions of MP3 ID3 tag:
version 1.0/ 1.1/ 2.2/ 2.3
•
Do not attach the extensions to files other than the Audio file.
If the extension is attached, the file, which is not the Audio
file, will play and outputs a loud noise, causing damage to the
speaker.
Limitation of structure for the file and the
folder
•
•
The files with copy protection cannot be played.
Audio files cannot be played depending on the encoding
software setting, USB device type, and/or recording
conditions.
•
Maximum number of folders (including root folder)
CD-ROM, CD-R. CD-RW: 256
USB device: 999
•
Maximum number of files per folder (including the number of
folders)
•
The unit may not be compatible with upgrade of
compression format standard and additional specifications.
CD-ROM, CD-R. CD-RW: 512
Playable MP3 file
USB device: 999
•
•
MPEG 1/2 Audio Layer 3 file
Transfer bit rate: 8/ 16/ 24/ 32/ 40/ 48/ 56/ 64/ 80/ 96/ 112/
128/ 144/ 160/ 192/ 224/ 256/ 320 kbps
Sampling frequency: 48/ 44.1/ 32/ 24/ 22.05/ 16/ 12/ 11.025/
8 kHz
Playing order of the audio file
•
Audio files are played in the order the files are written. You
can specify the order of playback by numbering files in a
folder and writing them by folder.
•
Example
Playable WMA file
^
¡
:
Folder
Fod
CD
(1)
•
•
•
The file in accordance with Windows Media Audio 9
Transfer bit rate: 32-192 kbps
: A
Audio file
¡!
2
Sampling frequency: 48/ 44.1/ 32 kHz
3
¡#
¡$
Playable storage media
•
•
CD-ROM, CD-R, CD-RW
USB device (USB version 1.1/2.0)
4
¡"
5
⁄
¡%
¡P
•
•
•
CD-RW discs which are quick formatted by the writing
software cannot be used.
When recording to the maximum CD-R/RW media capacity at
once, the writing software is set to“Disc at once”.
For details on the available USB devices, refer to <About USB
device> (page 7).
• Playing order
Playing order after ¡! play:
➡ ¡", ¡#, ¡$, ¡%...
Playable CD-R/RW format
•
•
ISO 9660 Level 1/2
Joliet
Playable file format of USB device
•
For the formats supported by USB devices, refer to <About
USB device> (page 7).
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
About USB device
Notes on use of the USB device
This unit can play audio files stored in the flash
memory and digital audio player that have a USB port
(these devices are referred to as USB devices in this
document).
Description of the button
name in this manual
Most of the functions are designed to be able to
operate from the remote control unit. Therefore, in
this manual, the button names are described using
the names on the remote control unit first, followed
by names on the main unit put in parenthesis.
The following restrictions are placed on the types and
usage of available USB devices:
Example:
VOLUME UP/DOWN (volume %/fi) buttons
Available USB devices
•
•
USB devices belonging to the USB mass storage class.
USB devices whose maximum current consumption is 500
mA or less.
Button on the main unit
Button on the remote control unit
•
Supported formats and USB device types : FAT 16/ 32
⁄
•
USB Mass Storage Class : USB devices that the PC can
recognize as an external storage without using any special
driver or application software.
•
•
Contact the sales agent as to whether your USB device
conforms to the USB mass storage class specs.
Using an unsupported USB device can result in abnormal
playback or display of the audio file.
Even if you use the USB device conforming to the above
specs, audio files cannot be played normally depending on
the type or condition of the USB device.
EN7
Download from Www.Somanuals.com. All Manuals Search And Download.
Names and functions of parts
Top view
Phones jack
CD door
Front view
Remote sensor
USB connector
Cassette tape door
Download from Www.Somanuals.com. All Manuals Search And Download.
8
EN
Buttons both on the remote control unit and
the unit
25
26
TIME DISPLAY (RDS/display) button
To view the current status of the system.
To change the time display for CD.
1
(
) button
To change the information display for audio files.
To switch the system on or to standby mode.
TIMER SET (timer set) button
To view the clock or set the clock.
standby indicator (on the main unit only)
4
5
RDS DISPLAY (RDS/display) button
To change the display for RDS.
Buttons only on the remote control unit
2
P.MODE (p.mode) button
To program tracks/files for CD/USB.
To program preset radio stations for TUNER.
To set or reset clock.
SLEEP button
To select the sleep time.
3
STEREO/MONO button
To switch between stereo mode and mono mode (on FM
band only) for TUNER.
To set or reset timer.
7
8
9
EQ (EQ/X-bass) button
6
RANDOM button
To playback in random order for CD and USB.
To select the desired sound effect : POP, CLASSIC, ROCK,
JAZZ, or FLAT (off).
12
digit 0 – 9/A – Z buttons
To select a track/file number for CD/USB.
To select a preset radio station for TUNER.
To enter file names in file search mode for audio files.
P.CALL/ALBUM 5/∞ (p.call/album +/–) buttons
To select a preset radio station for TUNER.
To select an album of audio files.
SEARCH/TUNING 4 /¢ (4 /¢ search
+/–) buttons
To search forward/backward to next/previous track for CD.
To skip tracks for CD.
14
CLEAR button
To delete the file name entered during file search.
15
MUTE button
To interrupt and resume sound reproduction.
To search forward/backward or to skip to the next/
previous files for audio files.
To fast forward or rewind a tape.
17
FILE SEARCH button
To select a desired file in audio files.
To tune to higher/lower radio frequency or search radio
stations for TUNER.
To set the hour and minutes for clock.
To set timer function for timer.
19
ENTER button
To confirm the selection in file search mode for audio files.
22
PTY button
To carry out PTY search.
10
Source buttons
To select the source you wish, or to turn the system on to
the selected source.
23
INTRO button
To play first several seconds for each track/file of CD and
USB.
11
13
16
PLAY/PAUSE 6 (6) button
To start or interrupt playback for CD, USB and TAPE.
Buttons only on the unit
27
VOLUME UP/DOWN (volume %/fi) buttons
(demo) button
To activate/deactivate the demonstration in power on
mode.
To increase or decrease the volume.
STOP 7 (7) button
To stop playback for CD, USB and TAPE.
To stop program for CD and USB.
18
Standby mode
TAPE REC (rec) button
To record from TUNER, CD or USB to a cassette tape.
While the standby indicator is lit, a small amount of power is
supplied to the system to back up the memory. This is called
standby mode. Under the condition, the system can be turned
ON by the remote control unit.
20
21
24
X.BASS (EQ/X-bass) button
To switch on/off bass enhancement.
REPEAT (repeat) button
To repeat one track/file or all tracks/files for CD and USB.
TIMER ON/OFF (timer on/off) button
To switch the timer on/off.
EN9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic function
Demonstration mode
Volume control
The system is equipped with a demonstration
function (only display). When the power cable is
plugged in and button is pressed to turn the
system on for the first time, the demonstration
automatically starts. The demonstration consists of
sequential change of display and indicators showing
the operations, but the audio itself does not change.
The demonstration function can be cancelled as
follows.
Press VOLUME UP (volume %) button to increase, or
press VOLUME DOWN (volume fi) to decrease the
volume level.
“VOL XX”is displayed. “VOL XX”denotes the volume
level.
To switch off the volume temporarily
Press MUTE button.
Playback continues without sound, and the icon
“MUTE”appears on the display.
To deactivate the demonstration
Press and hold (demo) button on the unit for more
than 1 second during demonstration.
⁄
•
To restore the volume, press MUTE button again or adjust the
volume.
To activate the demonstration
After turning the power on, press (demo) button on
the unit for more than 1 second.
Sound control
The sound control system feature enables you to
enjoy special sound effects; preset equalizer settings
and bass enhancement, providing the best music
reproduction.
⁄
•
The demonstration operates automatically when; a power has
failed and then recovered, or the plug of the power cable has
been pulled out while the power was on and then plugged
back in.
To switch on preset equalizer settings
Press EQ (EQ/X-bass) button to select the desired
sound effect: POP, CLASSIC, ROCK, JAZZ or FLAT
(off).
Switching the system on
Press , CD/USB (CD/USB), TUNER band (TUNER
band) or TAPE (TAPE) button.
To switch on the bass enhancement
The standby LED will go out.
The system will switch to the last selected source or
the selected source.
Press and hold X.BASS (EQ/X-bass) button until the
icon “X-BASS” appears on the display.
⁄
•
To switch off X-BASS, press and hold X.BASS (EQ/X-bass)
button until the icon“X-BASS”disappears.
EQ and X-BASS functions are not applied to the recording
sound.
Switching the system to standby mode
Press button.
•
The clock is displayed.
Headphones
To listen to your stereo with headphones (not
included), use the 3.5 mm phones jack on the top of
the unit.
¤
•
Excessive sound pressure from earphones and headphones
can cause hearing loss.
10
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD/MP3-CD/WMA-CD/USB device
Preparation
Playing a disc/USB device
Press PLAY/PAUSE 6 (6) button to start
playback.
Loading a disc
1
2
3
Press CD/USB (CD/USB) button to select CD
mode.
The track/file number and elapsed playing time of
the current track/file appear on the display.
⁄
Press the area marked [push open] on the top
cover to open the CD door.
•
To interrupt playback, press PLAY/PAUSE 6 (6) button.
The playing time starts flashing.
To resume playback, press PLAY/PAUSE 6 (6) button
again.
Place a disc into the tray with the label facing
up.
•
To stop playback, press STOP 7 (7) button.
Push surrounding of the disc center hole until it is
locked to the center part of the tray.
Selecting a desired track/passage
4
Close the CD door.
For a normal CD, the total playtime and total
number of tracks will appear in the display.
For an MP3-CD and WMA-CD, the total album
number and total file number will appear on the
display.
To select a desired track
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button repeatedly until the desired
track appears on the display.
⁄
⁄
•
•
To remove the disc, press the area marked [push open], grasp
If playback is stopped, press PLAY/PAUSE 6 (6) button
to start playback.
the disc by its edges, and carefully pull it out.
•
The digit buttons, 0–9 on the remote control unit can also be
used to select a track.
Inserting a USB device
Press the digit buttons as shown below:
To select track 2 : 2 and ENTER
To select track 23 : 2, 3 and ENTER
1
Press CD/USB (CD/USB) button to select USB
mode.
To select track 120 (Audio file only) : 1, 2 and 0
2
Insert a USB device to the USB connector on the
front panel.
To search for a particular passage during
playback
Playback automatically starts.
Press and hold SEARCH/TUNING 4 or ¢ (4 or
⁄
¢
search +/–) button and released it when the
•
•
•
•
To ensure good system performance; wait until the unit
completely reads the disc/USB device before proceeding.
If the disc compartment is not loaded with a disc, “NO DISC”is
displayed. If the disc is unreadable, “NO PLAY”is displayed.
If no USB device is inserted, “NO USB”is displayed. If the USB
device is unreadable, “NO DATA”is displayed.
For audio files, reading time may exceed 10 seconds due
to the large number of songs compiled into one disc/USB
device.
desired passage is located.
•
•
For audio files, “A”on the display represents ALBUM.
For audio files, the total album number on the display
indicates the number of all the albums recorded in the disc/
USB device.
•
The icon“MP3”appears only when an MP3-file is played. It does
not appear when playing a WMA-file.
EN11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD/MP3-CD/WMA-CD/USB device
Selecting a desired album/file (For
audio file only)
Programming tracks
Programming tracks of a disc is possible when
playback is stopped. Up to 60 tracks can be stored in
the memory in any order.
To select a desired album
Press P.CALL/ALBUM 5 or ∞ (p.call/album + or –)
button until the desired album number appears on
the display.
1
In stop mode, press P.MODE (p.mode) button to
enter program setting.
The icon“PROGRAM”and“– – P–01”appears on
the display. “– –”indicates track number and“P–01”
indicates program number.
“Axxx xxx”appears on the display. “Axxx”indicates
album number and“xxx”indicates the file number.
The icon“PROGRAM”starts flashing.
To select a desired file
2
3
Press SEARCH/TUNING 4 or ¢ (4 or ¢
Press SEARCH/TUNING 4 or ¢ (4 or ¢ search
+/–) button repeatedly until the desired file from
the current album appears on the display.
search +/–) button to select the desired track.
The program number starts flashing.
“Axxx xxx”appears on the display. “Axxx”indicates
album number and“xxx”indicates the file number.
Press P.MODE (p.mode) button to store the
selected track.
⁄
The track number returns to“– –”and the next
program number appears on the display.
•
The digit buttons, 0–9 on the remote control unit can also be
used to select a file.
4
Repeat steps 2 to 3 to select and store other
desired tracks in this way.
To search a desired file by file name
The icon“PROGRAM”appears on the display.
1
2
3
In stop mode, press FILE SEARCH button.
5
Press PLAY/PAUSE 6 (6) button to play the
programmed tracks.
The icon“FILE SEARCH”appears on the display.
Press the digit buttons A-Z to input the first
character of the file name you wish to search.
⁄
•
•
•
•
The digit buttons, 0–9 on the remote control unit can also be
used to select tracks.
“FULL”starts flashing if you attempt to program more than 60
tracks.
To review the program sequence, press P.MODE (p.mode)
button in stop mode.
If you press REPEAT (repeat) button during programmed
playback, the current track or all programmed tracks is/are
played repeatedly.
Press ENTER button.
“A”appears and flashes on the next of the first
character.
4
Repeat step 2 and 3 to enter the characters
until the one before the last character.
5
For the last character, press the digit buttons
A-Z to input.
The icon“REPEAT”or“REPEAT ALL”and the icon“PROGRAM”
appear on the display.
6
Press FILE SEARCH button.
“SEARCH”appears on the display.
7
Press PLAY/PAUSE 6 (6) button to start
playback.
⁄
•
If the unit finds an appropriate file, the album number and
track number will be displayed. Press TIME DISPLAY (RDS/
display) button. The file name will be scrolled on the display.
If there is no appropriate file, “NO FILE”is appeared.
•
12
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Random play
Programming files (For audio file only)
You can play all the tracks/files in random order.
Programming files of an MP3-CD/WMA-CD/USB
device is possible when playback is stopped. Up to 60
files can be stored in the memory in any order.
1
During playing, pause or stop mode, press
RANDOM button to enable random play mode.
1
2
In stop mode, press P.MODE (p.mode) button to
enter program setting.
The icon“RANDOM”appears on the display.
2
To exit random mode, press RANDOM button
again.
The icon“PROGRAM”and“– – – P–01”appear on
the display. “– – –”indicates file number of the disc/
USB device and“P–01”indicates program number.
The icon“PROGRAM”starts flashing.
The icon“RANDOM”disappears from the display.
⁄
•
Press P.CALL/ALBUM 5 or ∞ (p.call/album +
or –) to select the desired album and press
SEARCH/TUNING 4 or ¢ (4 or ¢ search
+/–) button to select the desired file.
If the program function or the repeat function is on, random
play cannot be used.
Repeat play
You can play the current track/file/album or the
whole disc/USB device repeatedly.
The program number starts flashing.
3
4
Press P.MODE (p.mode) button to store the
selected file.
The file number returns to“– – –”and the next
program number appear on the display.
To repeat all the tracks/files
Press REPEAT (repeat) button once in play or pause
mode.
Repeat steps 2 to 3 to select and store other
desired files in this way.
The icon“REPEAT ALL”appears on the display.
The icon“PROGRAM”appears on the display.
⁄
•
•
All tracks/files are repeated continuously.
5
Press PLAY/PAUSE 6 (6) button to play the
programmed files.
To cancel repeat play, press REPEAT (repeat) button twice for
a normal CD and 3 times for audio files.
⁄
To repeat a single track/file
Press REPEAT (repeat) button twice for a normal CD
and 3 times for audio files in play or pause mode.
•
The digit buttons, 0–9 on the remote control unit can also be
used to select files.
•
“FULL”starts flashing if you attempt to program more than 60
files.
The icon“REPEAT”appears on the display.
•
•
Audio files can only be programmed within the same source.
To review the program sequence, press P.MODE (p.mode)
button in stop mode.
⁄
•
To cancel repeat play, press REPEAT (repeat) button once.
•
If you press REPEAT (repeat) button during programmed
playback, the current file or all programmed files is/are played
repeatedly.
To repeat one album (For audio file only)
Press REPEAT (repeat) button twice in play or pause
mode.
The icon“REPEAT”or“REPEAT ALL”and the icon“PROGRAM”
appear on the display.
The icon“REPEAT ALB.”appears on the display.
To clear the program
Press STOP 7 (7) button once in stop mode, and
twice during program playback.
⁄
•
•
To cancel repeat play, press REPEAT (repeat) button twice.
This function cannot be used in program mode.
The icon“PROGRAM”disappears from the display.
⁄
•
•
“P”represents PROGRAM.
The program is automatically cleared as soon as the CD door
is opened.
•
The function of program setting cannot be used in PLAY/
PAUSE mode.
EN13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD/MP3-CD/WMA-CD/USB device
Intro scan
This function let you listen to the first 10 seconds of
each track/file throughout the disc/USB device.
Press INTRO button to start scanning.
The icon“INTRO”appears on the display.
To stop the intro scan
Press INTRO button again.
The unit enters normal play mode and starts
playing from where you stop the scanning.
Changing the display of the disc/USB
device information
Pressing TIME DISPLAY (RDS/display) button shows
various display information of the disc/USB device,
such as time information of the current track or a
whole disc, program number during program play,
file and artist name of audio files, and etc.
14
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the radio
Tuning in radio stations
Tuning to a preset radio station
Press P.CALL/ALBUM 5 or ∞ (p.call/album + or –),
or digit buttons, 0–9 on the remote control unit to
select the desired preset number.
1
Press TUNER band (TUNER band) button to
select the desired waveband: FM or AM.
2
Press and hold SEARCH/TUNING 4 or ¢
(4 or ¢ search +/–) button to tune in to the
desired frequency.
The preset number and radio frequency appear on
the display.
STEREO/MONO
Press the STEREO/MONO button to select mono or
stereo mode.
⁄
•
To tune to a weak station, briefly press SEARCH/TUNING
4 or ¢ (4 or ¢ search +/–) button repeatedly until
the display shows the desired frequency or when the best
reception has been obtained.
When stereo mode is selected, the icon “STEREO”
appears on the display (if current station is FM
stereo).
⁄
Storing preset
•
You are able to select stereo or mono mode in FM band only.
You can store up to 20 for FM and 20 for AM radio
stations in the memory. When a preset radio stations
selected, the preset number appears on the display.
Using RDS (Radio Data System)
RDS is a system that transmits useful information (in
the form of digital data) for FM broadcasts along with
the broadcast signal. Tuners and receivers designed
for RDS reception can extract the information from
the broadcast signal for use with various functions,
such as automatic display of the station name.
1
2
Press TUNER band (TUNER band) button to
select the desired waveband: FM or AM.
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to tune in to the desired
frequency.
RDS functions
3
4
Press P.MODE (p.mode) button so that “– –”
starts flashing.
PTY (Program TYpe Identification) Search:
Automatically tunes to a station that is currently broadcasting
the specified program type (genre).
If you wish to store the radio station to another
preset number, press P.CALL/ALBUM 5 or ∞
(p.call/album + or –) to select the desired preset
number.
PS (Program Service Name) Display:
Automatically displays the station name transmitted by the RDS
station.
Radio Text function:
5
Press P.MODE (p.mode) button again to store
the radio station.
Displays the radio text data transmitted by some RDS stations
when you press the RDS DISPLAY (RDS/display) button. There
is“NO TEXT”display if no text data is transmitted.
6
Repeat steps 2 to 5 to store other preset radio
stations.
⁄
•
Some functions and function names may differ in certain
countries and areas.
⁄
•
During program, if no button is pressed within 20 seconds,
the system will exit program mode automatically.
EN15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the radio
Changing the RDS display information
While receiving a RDS station, pressing the RDS
DISPLAY (RDS/display) button changes the contents
of the display.
Social Affairs
Religion
Phone In
SOCIAL
RELIGION
PHONE IN
TRAVEL
Travel
Leisure
LEISURE
JAZZ
COUNTRY
NATION M
OLDIES
Every time the button is pressed, the display changes
in the following order:
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
PS (Program Service name) display
«
PTY (Program TYpe) display
«
FOLK M
DOCUMENT
RT (Radio Text) display
«
Frequency display and preset number display
4
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to start searching.
Tuning by Program TYpe (PTY search)
This function lets you set the tuner to automatically
search for stations which are currently broadcasting
the type of program (genre) you want to listen to.
⁄
•
Under certain receiving conditions, it may take more than 1
minute to complete the search.
•
If the desired program type cannot be found, “NO MATCH”is
displayed, then after several seconds the display returns to
the original display.
1
2
Press TUNER band (TUNER band) button to
select FM.
Press PTY button.
If the current station is with RDS, the program type
of the station is displayed.
3
Press PTY button to select your desired
program type.
Program type table
Program Type Name
News
Display
NEWS
Current Affairs
Information
Sport
AFFAIRS
INFO
SPORT
Education
Drama
Culture
Science
Varied Speech
Pop Music
EDUCATE
DRAMA
CULTURE
SCIENCE
VARIED
POP M
Rock Music
Easy Music
Light Classical Music
Serious Classical Music
Other Music
Weather
ROCK M
EASY M
LIGHT M
CLASSICS
OTHER M
WEATHER
FINANCE
CHILDREN
Finance
Children’s Program
16
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the cassette
Recording from a CD/MP3-CD/WMA-CD/USB
device
Playing a cassette tape
1
2
Press TAPE (TAPE) button to TAPE.
1
2
Insert a blank cassette tape into the tape deck.
Press the area marked [push open] to open the
cassette tape door.
Press the desired source button to select the
source you wish to record from.
3
Insert cassette tape into the compartment with
the open edge facing down.
For CD/MP3-CD/WMA-CD : Press CD/USB (CD/
USB) button to select CD input.
For USB device : Press CD/USB (CD/USB) button to
select USB input.
4
5
Close the door securely.
3
4
Insert a disc or a USB device and make sure that
the unit is in stop mode.
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to move tape to the desired
starting point.
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to select the first track/file
you want to record.
6
Press PLAY/PAUSE 6 (6) button to begin
playing the tape.
5
Press TAPE REC (rec) button to set the unit into
recording standby mode.
Recording on a cassette tape
You can record from a radio, a disc, or a USB device.
The icon“REC.”appears on the display.
6
Press PLAY/PAUSE 6 (6) button to begin
For the best recording, use a normal bias tape (Type
1 only).
recording.
The icon“SYNC”appears on the display.
Recording from a radio
⁄
•
To ensure good system performance, wait until the unit
completely reads the disc/USB device before recording.
To interrupt recording, press TAPE REC (rec) button. Press
PLAY/PAUSE 6 (6) button to resume recording.
To end recording, press STOP 7 (7) button.
For a CD/MP3-CD/WMA-CD : If you perform step 5 and 6
during playback, the recording will start from the beginning
of the current track/file.
1
2
3
Insert a cassette tape into the tape
compartment and close the door.
•
Press TUNER band (TUNER band) button to
TUNER and select a radio station.
•
•
Press TAPE REC (rec) button to set the unit into
recording standby mode.
•
During recording, it is not possible to listen to another source.
The icon“REC.”appears on the display.
4
Press PLAY/PAUSE 6 (6) button to begin
recording.
⁄
•
To end recording, press STOP 7 (7) button.
Radio recording tip
To temporarily pause the recording, press TAPE REC
(rec) button. Press PLAY/PAUSE 6 (6) button to
resume recording.
EN17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the cassette
Program recording from a CD/MP3-CD/
WMA-CD/USB device
Desired CD tracks/MP3 files/WMA files can be
programmed in the desired sequence and recorded
onto a tape.
1
2
Insert a blank cassette tape into the tape deck.
Press the desired source button to select the
source you wish to record from.
For CD/MP3-CD/WMA-CD : Press CD/USB (CD/
USB) button to select CD input.
For USB device : Press CD/USB (CD/USB) button to
select USB input.
3
4
Insert a disc or a USB device and make sure that
the unit is in stop mode.
Program the desired sequence of CD tracks/
MP3 files/WMA files.
See page 12 and 13 for programming procedure.
5
Press TAPE REC (rec) button to set the unit into
recording standby mode.
The icon“REC.”appears on the display.
6
Press PLAY/PAUSE 6 (6) button to begin
recording.
The icon“SYNC”appears on the display.
⁄
•
To end recording, press STOP 7 (7) button.
18
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/timer operation
View clock
Timer setting
The clock (if it is set) is shown in standby mode.
The system can switch on to CD, USB, TUNER or TAPE
mode automatically at a preset time, serving as an
alarm to wake you up.
To view the clock in any source mode, press TIMER
SET (timer set) button. The clock will be displayed.
The timer recording of radio programs onto a cassette
tape is also possible.
If the clock has not been set, “0:00”starts flashing.
Important!
Clock setting
Before setting the timer, ensure that the clock is
set correctly.
Before carrying out the clock setting, ensure that
the system is in standby mode.
When setting the timer (playback or recording) for
TUNER, be sure to select the station you wish to
tune in beforehand.
1
Press P.MODE (p.mode) button to enter the
hour setting mode.
The hour indication will start flashing.
1
2
Turn the system on.
2
3
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to set the hours.
Press TIMER SET (timer set) button twice to
enter timer setting mode.
Press P.MODE (p.mode) button to enter the
minute setting mode.
The icon“TIMER ON”starts flashing on the display.
3
4
Press P.MODE (p.mode) button.
The minute indication starts flashing.
The hour indication starts flashing.
4
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to set the minutes.
Set the time to start playback.
5
Press P.MODE (p.mode) button to store the
setting.
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to set timer start hours and
press P.MODE (p.mode) button to store the
setting. Repeat the same procedure to set the
minutes.
⁄
•
The clock setting will be erased when the power cord is
disconnected or a power failure occurred.
•
The clock can be set in either 12 or 24-hour mode. To change
the mode : When the system is in standby mode, press
(p.mode) button while pressing (7) button.
5
6
7
Press TIMER SET (timer set) button.
The icon“TIMER OFF”starts flashing.
Repeat the step 3 and 4 to set the time to stop
the timer (off time).
Press TIMER SET (timer set) button.
The icon“TIMER”flashes and the source display
appears.
8
9
Press P.MODE (p.mode) button.
Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to select the desired source
and press P.MODE (p.mode) button to store the
setting.
The source switches as follows :
“CD”=“USB”=“TUNER”=“TAPE”=“REC TU”
(recording tuner)
continued to next page
EN19
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/timer operation
To activate/deactivate the timer
Press TIMER ON/OFF (timer on/off) button.
10 Press TIMER SET (timer set) button.
The icon“TIMER”flashes and the volume display
appears.
If activated, the icon “TIMER”appears on the display.
11 Press P.MODE (p.mode) button.
⁄
•
The timer off will not be activated if the starting and stopping
time are the same.
12 Press SEARCH/TUNING 4 or ¢ (4 or ¢
search +/–) button to set volume level and press
P.MODE (p.mode) button to store the setting.
•
If the selected source (“CD”, “USB”, “TAPE”or“REC TU”) is not
available when preset timer is reached, TUNER will be selected
automatically.
During timer setting, if no button is pressed within 7 seconds,
the system will exit timer setting mode automatically.
13 Press TIMER SET (timer set) button.
•
14 Press TIMER ON/OFF (timer on/off) button to
activate timer mode.
Sleep timer setting
If the sleep timer is activated, the system will switch
to standby mode after the selected time has expired.
The icon“TIMER”changes from flashing to steadily
lit.
The timer is now set.
15 Switch the system to standby mode.
Each press of the SLEEP button decreases the timer
period by 10 minutes. The sleep timer can be set up
to 90 minutes.
⁄
•
When reached the preset timer, the selected source will play
or switch to standby mode after the timer has been activated.
The icon“SLEEP”appears on the display.
The display will change to sleep time display and
change as follows:
90 min - 80 min -70 min - 60 min - 50 min - 40 min
- 30 min - 20 min - 10 min - OFF - 90 min - 80 min...
While sleep mode is in active:
To deactivate the sleep timer
Press SLEEP button or press button to turn the
power off.
⁄
•
If timer off and the sleep off are all activated, the system will
switch to standby mode by the earlier timer set.
20
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
General information
Maintenance
Cleaning the cabinet
•
Use a soft cloth slightly moistened with a mild detergent
solution. Do not use a solution containing alcohol, spirits,
ammonia or abrasive.
Cleaning discs
•
When a disc becomes dirty, clean it with a cleaning cloth,
wipe the disc from the center out. Do not wipe in circular
motion.
•
Do not use solvents such as benzene, thinner commercially
available cleaners, or antistatic spray intended for analogue
records.
Cleaning the heads and tape path
•
To ensure good recording and playback quality, clean the
heads, the capstans and pressure rollers after every 50 hours
of tape operation.
•
•
Use a cotton swab slight moistened with cleaning fluid.
You also can clean the heads by playing a cleaning tape once.
Caution on condensation
Condensation (of dew) may occur inside the unit
when there is a great difference in temperature
between this unit and the outside. This unit may
not function properly if condensation occurs. In this
case, leave the unit for a few hours and restart the
operation after the condensation has dried up.
Be specially cautious against condensation in the
following circumstances:
When this unit is carried from one place to another
across a large difference in temperature, when the
humidity in the room where this unit is installed
increases, etc.
Warning notice
In most cases it is an infringement of copyright to
make copies of tapes or discs without the permission
of the copyright owners. Anyone wishing to copy
commercially available tapes or disc should contact
the mechanical copyright protection society limited
or the performing rights society limited.
EN21
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
Resetting the Microcomputer
Radio reception
Noise in radio.
The microcomputer may malfunction (unit cannot be
operated, or shows an erroneous display) if the power
cord is unplugged while the power is ON, or due to
some other external factor. If this happens, execute
the following procedure to reset the microcomputer
and return the unit to its normal operating condition.
\ Tune to a correct frequency.
\ Adjust the direction of the FM antenna.
\ AM antenna is built in; rotate the system to
face a new direction.
\ Increase the distance between the system and
TV or VCR.
When the power is on and TUNER input is
selected, press and hold down the 7 button on the
unit for more than 2 seconds.
Cassette deck operation
Cannot record.
•
Please note that resetting the microcomputer will clear the
contents of the memory and return the unit to the state it
was in when it left the factory.
\ Replace the tape or cover tabs with adhesive
tape.
\ Clean the head.
\ Use only NORMAL (IEC I) tape.
Check that following guide for problem resolution.
\ Do not use a cassette with more than 90-
minute recording time, for the tape used in
such a cassette is very thin and tends to cause
problem such as entanglement around the
pinch roller or could be easily cut off.
General
No sound.
\ Plug in AC cord securely.
\ Set the VOLUME control to proper sound level.
\ Make sure the source is set to the source you
Timer/Clock
wish to operate.
The timer is not working.
\ Pull out the headphones plug from the
\ Set the correct clock.
headphones jack.
\ Press the TIMER ON/OFF button to switch on
The left and right sound outputs are reverse.
the timer.
\ Check the speaker connections and location.
The system displays features automatically.
\ Switch the system to standby mode.
The timer/clock is erased.
\ Switch off the demo operation.
The system does not operate by pressing any
\ Power has been interrupted or power cord has
been disconnected. Set it again.
buttons.
Remote control unit
Does not function properly.
\ Unplug the AC cord and plug it back in.
CD player operation
“NO DISC” is displayed.
\ Replace the batteries.
\ Remove the obstacles.
\ Insert a disc correctly (label side up).
\ Clean the disc.
\ Use a new or readable disc.
\ Move closer to the system when using the
remote control and make sure that you are
pointing at unit’s remote sensor.
\ Wait until the moisture condensation at the
lens has cleared.
USB operation
“NO USB” is displayed.
\ Insert the USB device properly.
22
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Main unit
Speakers
Enclosure ..................................................................... Bass-reflex type
Speaker configuration
Amplifier section
Rated output power
Full range.................................................. 100 mm, cone type
Impedance .............................................................................................4 Ω
Maximum input level................................................................... 10 W
Dimensions ...................................................W : 130 mm (5-1/8”)
H : 208 mm (8-3/16”)
............................5.5 W + 5.5 W (1 kHz, 10% T.H.D., at 4 Ω)
Tuner section
FM tuner section
D : 161 mm (8-5/16”)
Tuning frequency range
Weight (net)................................................1.2 kg (2.7 lb) (1 piece)
......................................................................87.5 MHz – 108 MHz
AM tuner section
Tuning frequency range
Notes:
....................................................................... 531 kHz – 1,602 kHz
•
Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
Sufficient performance may not be exhibited at extremely
cold locations (where water freezes).
CD player section
Laser.....................................................................Semiconductor laser
Over sampling............................................................8 fs (352.8 kHz)
Laser wave length.......................................................760 – 800 nm
Laser power class.............................................................Class 1 (IEC)
D/A conversion..................................................................................1 Bit
•
USB interface
USB standard.......................................................................USB 1.1/2.0
Maximum supply current....................................................500 mA
File system............................................................................... FAT 16/ 32
MP3 decode
........................ Compliant with MPEG-1/2 Audio Layer-3
WMA decode
........................ Compliant with Windows Media Audio 9
Cassette deck section
Track........................................................... 4-track, 2-channel stereo
General
Power consumption..................................................................... 25 W
Dimensions .................................................W : 145mm (5-11/16”)
H : 208 mm (8-1/4”)
D : 235 mm (8-15/16”)
Weight (net).....................................................................2.8 kg (6.2 lb)
EN23
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on Disposal of Old Electrical
and Electronic Equipment (applicable for
EU countries that have adopted separate
waste collection systems)
Products with the symbol (crossed-out
wheeled bin) cannot be disposed as
household waste.
Old electrical and electronic equipment
should be recycled at a facility capable
of handling these items and their waste
byproducts.
Contact your local authority for details in locating a
recycle facility nearest to you.
Proper recycling and waste disposal will help conserve
resources whilst preventing detrimental effects on our
health and the environment.
For your records
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial numbers
whenever you call upon your dealer for information or service
on this product.
Model
Serial Number
24
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
|