DVD/CD-MP3 AUTO CHANGER
KDV-C810
KDV-C820
KDV-C830
KDV-C840
KDV-C860
INSTRUCTION MANUAL
This player has been designed to play back the DVD
software which has been encoded for specific region areas.
It cannot play back the DVD software encoded for other
region areas than the region areas for which it has been
designed.
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the
best performance from your new DVD/CD-MP3 auto changer.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on
COMPACT
the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your KENWOOD dealer for information or service
on the product.
DIGITAL VIDEO
Model KDV-C810 Serial number
© B64-2291-00/03 (K/E/M/X/C)
2RR6P10A12900A
Download from Www.Somanuals.com. All Manuals Search And Download.
2Warning
NOTE
2CAUTION
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
Use of controls or adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
In compliance with Federal Regulations,
following are reproductions of labels on, or
inside the product relating to laser product
safety.
reasonable protection against harmful
interference in a residential installation. This
equipment may cause harmful interference to
radio communications, if it is not installed and
used in accordance with the instructions.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
KENWOOD CORPORATION
2967-3, ISHIKAWA-CHO,
HACHIOJI-SHI
TOKYO, JAPAN
KENWOOD CORP. CERTIFIES THIS EQUIPMENT
CONFORMS TO DHHS REGULATIONS N0.21 CFR
1040. 10, CHAPTER 1, SUBCHAPTER J.
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
Location : Bottom Panel
• Increase the separation between the
equipment and receiver.
FCC WARNING
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
This equipment may generate or use radio
frequency energy. Changes or modifications to
this equipment may cause harmful
interference unless the modifications are
expressly approved in the instruction manual.
The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
NOTE
This Class B digital apparatus complies with
Canadian ICES-003.
— 3 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
• Do not use your own screws. Use only the
screws provided. If you use the wrong
screws, you could damage the unit.
IMPORTANT INFORMATION
2WARNING
You can enjoy a DVD with this unit alone when
connecting it to an external monitor or audio
equipment.
Also, you can operate this unit connected to a
center unit made by Kenwood to output
sound.
A Kenwood-made center unit that can be
connected to this unit is called “Center Unit”.
About a center unit that can be
connected to this unit:
If a center unit (such as CD receivers) has
capability for “N” of <“O-N” switch>, this unit
can be connected to this unit.
According to the operating instructions of a
center unit, the setting of <“O-N” switch> is
“N”. This unit is, however, exclusive to “N”.
Therefore, <“O-N” switch> is unnecessary.
If using a separate CD/MD changer switching
unit "KCA-S210A", AUX audio input is enabled
also on a disc changer control equipped center
unit not compatible with "N". In this case, this
unit cannot be operated on the center unit.
For connections to this unit, refer to "When
your car audio has RCA input" (page 32).
To prevent injury or fire, take the
following precautions:
• When extending the ignition, battery, or
NOTE
ground wires, make sure to use automotive-
2
• If you experience problems during
installation, consult your Kenwood dealer.
grade wires or other wires with a 0.75mm
(AWG18) or more to prevent wire
deterioration and damage to the wire
coating.
• The illustrations of the display and the panel
appearing in this manual are examples used
to explain more clearly how the controls are
used. Therefore, what appears on the display
in the illustrations may differ from what
appears on the display on the actual
equipment, and some of the illustrations on
the display may represent something
impossible in actual operation.
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
2CAUTION
The marking of products using lasers
(Except for some areas)
To prevent damage to the unit, take
the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of the
unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse with
the wrong rating may cause your unit to
malfunction.
CLASS 1
LASER PRODUCT
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It
means that the unit is utilizing laser beams
that are of a weaker class. There is no
danger of hazardous radiation outside the
unit.
For details of connection, refer to the
operating instructions attached to KCA-S210A.
The functions available and/or information
displayable may depend on types of units to
which you connect.
• To prevent a short circuit when replacing a
fuse, first disconnect the wiring harness.
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Do Not Load 3-in.(8cm) Discs
This player has been designed to play
back the DVD software which has
been encoded for specific region
areas. It cannot play back the DVD
software encoded for other region
areas than the region areas for which
it has been designed. (page 39)
Unplayable discs
This player cannot play back any of the
If you try to load a 3 in.(8cm) Disc with its
adapter into the unit, the adapter might
separate from the Disc and damage the unit.
following discs.
• DVD-ROM discs
• DVD-R/DVD-RW/DVD-RAM discs
• SVCD/HQVCD discs
• VSD discs
• CDV discs (Only the audio part can be
reproduced.)
• CD-G/CD-EG/CD-EXTRA discs (Only the
audio can be reproduced.)
Cleaning the Unit
If the front panel is dirty, wipe it clean with a
silicon cloth or soft dry cloth with the power
off.
The KDV-C810 will playback any disc
1
ALL
whose region number is
(or
).
Applying spray cleaner directly to the unit may
affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
The KDV-C820 will playback any disc
• Photo CD discs (Never attempt to play
them.)
2
ALL
whose region number is
(or
).
The KDV-C830 will playback any disc
ALL
whose region number is
(or
).
Lens Fogging
The KDV-C840 will playback any disc
This product incorporates copyright
4
ALL
whose region number is
(or
).
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the Disc player of the unit. Called
lens fogging, Discs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a while,
consult your Kenwood dealer.
protection technology that is protected by
method claims of certain U.S. patents and
other intellectual property rights owned by
Macrovision Corporation and other rights
owners. Use of this copyright protection
technology must be authorized by
The KDV-C860 will playback any disc
ALL
whose region number is
(or
).
Restrictions due to difference between
discs
Some DVD and VCD discs can be played only
in certain playback modes according to the
intentions of the software producers. As this
player plays discs according to their
intentions, some functions may not work as
intended by you. Please be sure to read the
instructions provided with each disc. When
an inhibition icon is displayed on the monitor,
it indicates that the disc being played is under
the restriction as described above.
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
Manufactured under license from Dolby
Laboratories.
“ Dolby ” and the double-D symbol are
trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-
1997 Dolby Laboratories, Inc. All rights
reserved.
Inhibition icon
“DTS” and “DTS Digital Out” are
trademarks of Digital Theater Systems, inc.
— 5 —
Download from Www.Somanuals.com. All Manuals Search And Download.
About Discs
Handling Discs
• Don’t touch the recording surface of the
Disc.
Disc cleaning
Clean from the center of the disc and move
outward.
Icons on the DVD discs
Indicates the region code where
the disc can be played.
ALL
Number of voice languages
recorded with the audio
function. The number in the icon
indicates the number of voice
languages. (Max. 8 languages)
8
Removing Discs
When removing Discs from this unit pull them
• CD-R and CD-RW are easier to damage than
a normal music CD. Use a CD-R or a CD-RW
after reading the caution items on the
package etc.
• Don’t stick tape etc. on the Disc.
Also, don’t use a Disc with tape stuck on it.
Number of subtitle languages
recorded with the subtitle
function. The number in the icon
indicates the number of subtitle
languages. (Max. 32 languages)
out horizontally.
32
Discs that can’t be used
• Discs that aren’t round can’t be used.
Number of angles provided by
the angle function. The number
in the icon indicates the number
of angles. (Max. 9 angles)
When using a new Disc
9
If the Disc center hole or outside rim has
burrs, use it after removing them with a ball
pen etc.
Aspect ratios that can be
selected. “LB” stands for Letter
Box and “PS” for Pan/Scan. In
the example on the left, the 16:9
video can be converted into
letter box video.
16:9 LB
• Discs with coloring on the recording surface
or that are dirty can’t be used.
• A CD-R or CD-RW that hasn’t been finalized
can’t be played. (For the finalization process
refer to your CD-R/CD-RW writing software,
and your CD-R/CD-RW recorder instruction
manual.)
Burrs
Burrs
Disc storage
• Don’t place them in direct sunlight (On the
seat or dashboard etc.) and where the
temperature is high.
• Store Discs in their cases.
DVD/CD accessories
Don’t use disc type accessories.
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MP3
This unit can play MP3(MPEG1, 2 Audio Layer 3). Note, however,
that the MP3 recording media and formats acceptable are limited.
When writing MP3, pay attention to the following restrictions.
A file with a name entered with characters not on the code list
may not play correctly.
Writing files into a medium
Acceptable media
When a medium containing MP3 data is loaded, the unit checks all the
data on the medium. If the medium contains a lot of folders or non-
MP3 files, therefore, it takes a long time until the unit starts playing
MP3.
The MP3 recording media acceptable to this unit are CD-ROM, CD-R,
and CD-RW.
When using CD-RW, do full format not quick format to prevent
malfunction.
In addition, it may take time for the unit to move to the next MP3 file
or a Track Search or Disc Search may not be performed smoothly.
Acceptable medium formats
Loading such a medium may produce loud noise to damage the speakers.
• Do no attempt to play a medium containing a non-MP3 file with the
MP3 extension.
The unit mistakes non-MP3 files for MP3 data as long as they have
the MP3 extension.
The following formats are available for the media used in this unit. The
maximum number of characters used for file name including the
delimiter (".") and three-character extension are indicated in
parentheses.
• ISO 9660 Level 1 (12 characters)
• ISO 9660 Level 2 (31 characters)
• Joliet (64 characters; up to 19 characters are displayed on this unit)
The media reproducible on this unit has the following limitations:
• Maximum number of directory levels: 8
• Do not attempt to play a medium containing non MP3.
MP3 playing order
When selected for play, Track Search, or for Folder Select, files and
folders are accessed in the order in which they were written by the CD
writer.
• Maximum number of files per folder: 255
Because of this, the order in which they are expected to be played
may not match the order in which they are actually played. You may be
able to set the order in which MP3 are to be played by writing them
onto a medium such as a CD-R with their file names beginning with
play sequence numbers such as "01" to "99", depending on your CD
writer.
• Maximum number of characters for folder name: 64 (up to 19
characters are displayed on this unit)
• Maximum number of folders: 50
MP3 written in the formats other than the above may not be
successfully played and their file names or folder names are not
properly displayed.
When a Track Search is executed with file
Settings for your MP3 encoder and CD writer
Root
¡$ being played ...
Folder
When you use your CD writer to record MP3 up to the maximum disc
capacity, disable additional writing. For recording on an empty disc up
to the maximum capacity at once, check Disc at Once.
File
Operation of the button
¢ Button
Current
file number
4 Button
Beginning of file
Entering file and folder names
When entering file and folder names, use the alphanumeric characters
described above only. (ASCII code: 0x20 – 0x7f)
If you use any other character for entry, the file and folder names are
not displayed correctly. They may neither be displayed correctly
depending on the CD writer used.
When an Folder select is executed with file ¡$
being played ...
Operation of the button
Current
folder number
Level 1
Level 3
DISC– Button
DISC+ Button
Level 2
Level 4
The unit recognizes and plays only those MP3 which have the MP3
extension (.MP3).
— 7 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
DVD: Digital Versatile Disc
Title number (DVD)
A type of disc which contains recording of audio/video packaged
media with high video and audio quality, such as a movie,
featuring large recording capacity and digital signal processing
capability.
The title is the largest unit of video and audio recorded in a DVD.
It usually corresponds to a single movie of video software or an
album (sometimes a piece of music) of music software. The
numbers assigned to individual titles are referred to as the title
numbers.
VIDEO CD (VCD)
A type of CD which contains the recording of moving images. It
compresses image information by about 1/120 and audio
information by about 1/6 and accommodates up to 74 minutes of
recording in a disc with the same diameter as ordinary music CD
of 12 cm.
Chapter number (DVD)
The chapter is a section of video and audio recorded in a DVD. A
title is composed of several chapters. The numbers assigned to
individual chapters are referred to as the chapter numbers.
Track number (CD, VCD)
Some VCDs do not have the P.B.C. compatibility and are capable
of playback only, while some are P.B.C.-compatible and are
capable of various special playback control operations. This player
can play both of these VCDs.
MPEG: Moving Picture Expert Group (DVD, VCD)
This is an international standard for digital video and audio
compression and decompression in media.
A track is also a section of video and audio recorded in a disc. The
numbers assigned to individual tracks are referred to as the track
numbers.
With most of music Discs, a track is assigned to a piece of music.
However, with a VCD, the sections of the contents do not always
correspond to the assigned tracks.
As (special) playback functions such as skipping and programming
of ordinary Discs are based on track number data, such playback
functions are sometimes impossible with some VCDs.
Dolby Digital
This is a digital audio compression technology developed by Dolby
Laboratories. It is compatible with 5.1-channel surround audio as
well as normal stereo (2-channel) audio and can accommodate a
large amount of audio data efficiently in a disc.
P.B.C.: Play-Back Control (VCD)
When a VIDEO CD carries “Play Back Control capable” or similar
message on the disc or jacket, desired scenes and information
can be played back in an interactive manner using a hierarchical
structure while viewing the menu screens displayed on the TV
screen.
DTS
Name of a digital surround system developed by Digital Theater
Systems, Inc.
MENU/TOP MENU (DVD)
Some DVDs display more than one title in a screen. This screen is
referred to as the title menu.
The DVD menu is the item display (menu screen) for use in
setting operations. The DVD menu can be recalled any time during
playback to perform settings according to the current software,
including the audio switching between Dolby Digital and PCM,
switching of language used in the subtitles and spoken voice.
Subtitles (DVD)
Some DVD discs contains the recording of more than one subtitle
language. This player allow you to select one of the recorded
subtitle languages during playback.
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading discs
Setting the disc
Installing the magazine
1 Make sure the disc magazine is the right way up with the
"DVD"/"disc" logo on the top. Pull the tray out by the
projection.
1 Open the DVD/CD changer door.
2 Insert the magazine into the DVD/CD changer until it clicks.
2 Set a disc on the tray with the recording face upward. (The
label face is downward.)
3 Close the DVD/CD changer door.
8-cm discs cannot be used. If an 8-cm disc adapter is used, the disc
cannot be ejected.
3 Insert the tray into the disc magazine until it locks.
Magazine ejection
1 Open the DVD/CD changer door.
The discs are numbered from the top from 1 to 10.
2 Press the [EJECT] button.
3 Close the DVD/CD changer door.
— 9 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of remote control
Loading and Replacing the battery
Use two "AAA"-size batteries.
POWER
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
RESUME
38
RETURN
REP
ENTER/
Joystick
+
-
AUDIO
TIME
VOCAL
-
+
7
RDM
4/¢
SCN
ANGLE
SUB TITLE
DISC–/DISC+
2WARNING
REW/FF
LIST
Store unused batteries out of the reach of children. Contact a doctor
immediately if the battery is accidentally swallowed.
PBC
ZOOM
[#0]–[#9],[+10]
GOTO
CLEAR
Do not set the remote on hot places such as above the dashboard.
TOP MENU
MENU
• When the remote controllable distance becomes short, replace
both of the batteries with new ones.
• A portion of the operations may not be possible, depending on the
unit that is connected.
<OSD of DVD/VCD>
: Angle indicator
: Language for subtitle indicator
: Language for voice indicator
OSD : On Screen Display
Power / Playing Disc
Turning ON the Power
Press the [POWER] button.
Turning OFF the Power
<OSD of CD-DA>
<OSD of MP3>
Press the [POWER] button.
You cannot view video pictures whilst the vehicle is moving. To
enjoy video pictures, find a safe place to park and engage the
parking brake. (Video output for front seats)
D I S C 1 0
T R A C K 1 9 9
3
D I S C 1 0
T R A C K 9 9
3
A – T I M E 0 1 : 0 2 : 1 5
A – T I M E 0 1 : 0 2 : 1 5
N A M E : A U D I O – C D
N A M E : A B C D E F G H I J K L M N O P Q
N A M E : A B C D E F G H I J K L M N O P Q
It takes time for the unit to check each medium to see if it contains
any MP3 file before it starts playing the medium.
Select the source mode of this unit on the center unit to operate
this unit linked with the center unit.
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
• Before selecting a source of this unit on the center unit
– Turn on/off the power on the remote controller.
• After selecting a source of this unit on the center unit
– Select the source mode of this unit to turn it on.
– Select the other modes to turn off this unit.
Disc Search
Selecting the disc you want to hear.
Press the [DISC–] or [DISC+] button.
– Cannot turn off this unit on the remote controller.
Operation after the end of a disc is reached
Playback does not automatically switch to the next disc once the
current disc is played to the end. Switch the disc manually.
Track/Chapter Search
Press the [4] or [¢] button.
Disc
Operation
Disc
Search
DVD, VCD[PBC ON] The operation differs according to the type
of disc. (Generally the menu reappears.)
DVD
Searching for a chapter
Searching for a select
Searching for a track
Searching for a file
VCD[PBC ON]
VCD[PBC OFF], CD-DA
MP3
VCD[PBC OFF],
CD-DA, MP3
Playback starts from the beginning of the
disc.
Pausing and Restarting Disc Play (DVD, VCD, CD-DA)
Press the [38] button to make the disc pause.
Press the [38] button again to start play again.
Folder Select Mode (MP3)
Selecting the folder you want to hear.
• The following operation may not be available with certain discs.
• For MP3, Refer to <Folder Select Mode>. (page 11)
1 Stopping play and Folder Select mode
Press the [38] or [7] button.
2 Selecting the desired folder
Press the [DISC–] or [DISC+] button.
Stopping playback (DVD, VCD, CD-DA)
3 Decide the folder to play
Press the [7] button.
Press the button once during playback stops it and the position
where it is stopped is stored in memory.
Press the [38] button.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
• Press [38] under this condition to resume the play.
• No operation is possible depending on disks.
• For MP3, Refer to <Folder Select Mode>. (page 11)
Press the [7] button.
Press the button twice to cancel playback.
— 11 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of remote control
• While a VCD is played with the PBC function disabled, a track
change releases the slow playback.
Forward / Reverse Search (DVD, VCD, CD-DA)
Forward search
Canceling the slow playback
Press the [FF] button.
Press the [38] button.
Reverse search
Press the [REW] button.
• Each time the button is pressed the Search speed switches as
shown below.
Frame-by-frame playback (DVD, VCD)
Setting
Display
1 Pausing
2 times
4 times
6 times
8 times
"– – – 22" / "33 – – –"
"– – 22 –" / "– 33 – –"
"– 22 – –" / "– – 33 –"
"22 – – –" / "– – – 33"
Press the [38] button.
2 Frame-by-frame playback
Press the [4] or [¢] button.
Canceling the frame-by-frame playback
• Audio output of DVDs and video CDs is disabled during fast-
forward and fast-rewind. Audio output of audio CDs is disabled at
the 8x-speed operation.
Press the [38] button.
Canceling Fast Forwarding / Reversing
Press the [38] button.
Track Scan (VCD, CD-DA)
Playing the first part of each song on the disc you are listening
to and searching for the song you want to listen to.
(VCD: When the PBC function is set to [OFF]. page 14)
Slow playback (DVD, VCD)
1 Pausing
Press the [38] button.
1 Start Track Scan
Press the [SCN] button.
"SCAN" is displayed. Scan starts from the first track.
2 Forward slow playback
Press the [FF] button.
Reverse slow playback
Press the [REW] button.
2 Release it when the song you want to listen to is played
Press the [SCN] or [38] button.
• Each time the button is pressed the Search speed switches as
shown below.
Setting
Display
1/6 times
1/4 times
1/2 times
"– – 28" / "83 – –"
"– 28 –" / "– 83 –"
"28 – –" / "– – 83"
Repeat Play
(VCD: When the PBC function is set to [OFF]. page 14)
• Slow rewinding play is disabled for VCD.
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the [REP] button.
Each time the button is pressed the Repeat Play switches as
shown below.
Direct Disc Search
Doing Disc Search by entering the disc number.
1 Enter List Screen
Press the [LIST] button.
DVD:
Repeat play
Display/Indicator
Chapter Repeat
Title Repeat
OFF
"CHAPTER REPEAT"/"CREP"
"TITLE REPEAT"/"TREP"
"REPEAT OFF"/ –
2 Enter the disc number
Press the number buttons.
3 Do Disc Search
Press the [DISC+] or [DISC–] button.
VCD[PBC OFF], CD-DA:
Repeat play
Display/Indicator
Clear the Disc number
Press the [CLEAR] button.
Track Repeat
OFF
"REPEAT"/"REP"
"REPEAT OFF"/ –
MP3:
Repeat play
Display/Indicator
Direct Track/Chapter Search
Doing Track/Chapter Search by entering the track/chapter
number.
File Repeat
Folder Repeat
OFF
"FILE REPEAT"/"REP"
"FOLDER REPEAT"/"FREP"
"REPEAT OFF"/ –
1 Enter List Screen
Press the [LIST] button.
2 Enter the track/Chapter number
Press the number buttons.
Random Play (VCD, CD-DA, MP3)
Play all the songs on the disc or MP3 folder in random order.
(VCD: When the PBC function is set to [OFF]. page 14)
Press [+10] button to input two digits or more.
3 Do Track/Chapter Search
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
When it's ON, "RANDOM"/"RDM" is displayed.
Press the [4] or [¢] button.
Clear the Track/Chapter number
• When the [¢] button is pressed, the next song select starts.
• When the [4] button is pressed, the beginning of the current
song.
Press the [CLEAR] button.
— 13 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of remote control
"DVD MENU" is displayed.
GOTO - Direct Search (DVD, VCD, CD-DA)
Enter Top Menu (root menu) mode
Press the [TOP MENU] button.
"TITLE MENU" is displayed.
1 Enter GOTO mode
Press the [GOTO] button.
For DVDs, specify the title/chapter number or the elapsed time of
the title.
For VCD[PBC OFF] and CD-DA, specify the elapsed time of the
disc.
2 Selecting the menu item
Move the Joystick or press the number buttons.
3 Setting the menu item
Press the [ENTER] button.
2 Select Search mode (DVD only)
Press the [GOTO] button.
Each time the button is pressed the Search mode switches as
shown below.
See your disc’s operating instructions for information on the menu
operation.
Canceling the Menu mode
Search mode
Display
Press the [RESUME] button.
Title/Chapter Search
Time Search
"T. **/ ** C. **/**"
"TIME __ : __ : __"
You can switch the title input from/to the chapter input by operating
the joystick from left side to right side in the title/chapter input
mode.
Using the PBC (VCD)
Available for video CDs with playback control record. (VCD:
When the PBC function is set to [ON]. page 14)
3 Enter the number
Press the number buttons.
1 Selecting the menu item
Move the Joystick or press the number buttons.
Example: In case of Chapter 13 of a DVD
,
"T02/05 CØØ∞/030" :
2 Setting the menu item
Press the [ENTER] button.
Example: In case of 1 hour 23 min. 45 sec. of a CD-DA
"GOTO __ : __ : __" :
,
,
,
,
,
See your disc’s operating instructions for information on the PBC
operation.
4 Do Search
Press the [ENTER] button.
PBC function On/Off (VCD)
You can determine whether to use the PBC function for video
CDs with playback control record.
Using DVD Menu (DVD)
Available in DVDs with title menus/root menus.
1 Enter Title Menu mode
Press the [MENU] button.
Press the [PBC] button for at least 1 second.
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Each time the button is pressed PBC function turns ON or OFF.
This function cannot be used during the List Mode. (page 17)
"BOTH VOCAL"
"MIX VOCAL"
"NO VOCAL"
Both vocal
Mix vocal
Vocal sound off
This function cannot be used during the List Mode. (page 17)
VCD/CD-DA
Display/Indicator
Switching the Viewing Angle (DVD)
Press the [ANGLE] button for at least 1 second.
Each time you press the button to switch viewing angle.
Setting
"MONO LEFT"/"LchONLY"
"MONO RIGHT"/"RchONLY"
"STEREO"/"LR BOTH"
Monaural Left (L / L)
Monaural Right (R / R)
Stereo (L / R)
Selecting the Sub Title Language (DVD)
Press the [SUB TITLE] button for at least 1 second.
Each time you press the button to change the sub title language.
Viewing Zoom (DVD, VCD)
Zooming the image
This function cannot be used during the List Mode. (page 17)
Press the [ZOOM] button for at least 1 second.
Each time the button is pressed the image switches between
zoom ("X1.5", "X2", "X4") and normal ("OFF").
This function cannot be used during the List Mode. (page 17)
Selecting the Audio Language (DVD)
Scrolling the image
Press the [AUDIO] button for at least 1 second.
Each time you press the button to change the voice language.
Move the Joystick.
The zoom point is scrolled as the joystick moves.
Switching the Vocal sound (DVD, VCD, CD-DA)
Press the [VOCAL] button for at least 1 second.
Each time the button is pressed the vocal sound switches.
KARAOKE DVD
Display
Setting
"LEFT VOCAL"
Left vocal
"RIGHT VOCAL"
Right vocal
— 15 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of remote control
In OSD screen
Title Information (DVD)
DVD
This shows the information on your disc/title.
Information
Display
1 Enter Title Information
Title time
"TITLE##/## CHAPTER###/###"
"TITLE REMAIN"
"CHAPTER ELAPSED"
–
Press the [PBC] button for at least 1 second.
Remaining time of title
Chapter time
OFF
This function cannot be used during the List Mode. (page 17)
D I S C
T T L 1
T T L 2
T T L 3
VCD[PBC ON]
Information
T O T A L T I T L E S :
P L A Y E N T R I E S :
P L A Y T I M E :
A U D I O S T R E A M S :
S U S P I C S T R E A M S :
1 0
1 0
Display
Track Time
OFF
"SINGLE ELAPSED"
"OFF"
0 1 : 1 0 : 1 0
1 0
1 0
N T S C
VCD[PBC OFF]
Information
Display
Track Time
Disc time
Remaining time of entire disc
OFF
"SINGLE ELAPSED"
"TOTAL ELAPSED"
"TOTAL REMAIN"
"OFF"
2 Select Title
Move the Joystick to left or right side.
Press the [FF] or [REW] button to switch a title quickly.
CD-DA
Canceling the title information
Information
Display/Indicator
Press the [PBC] button for at least 1 second.
Track Time
Disc time
Remaining time of entire disc
"SINGLE ELAPSED"/"P-TIME"
"TOTAL ELAPSED"/"A-TIME"
"TOTAL REMAIN"/"R-TIME"
MP3
Information
Display/Indicator
Switching the Time display
File Time
Remaining time of file
"FILE ELAPSED"/"P-TIME"
"FILE REMAIN"/"R-TIME"
Press the [TIME] button for at least 1 second.
Each time the button is pressed the display switches as shown
below.
The chapter time is not displayed depending on software.
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
In List screen
List mode
DVD
Information
1 Enter List Screen
Indicator
Press the [LIST] button.
Title time
Remaining time of title
Chapter time
"A-TIME"
"R-TIME"
"P-TIME"
DISC LIST
I N F O R M A T I O N
AUDIO–CD
DVD–VIDEO
DVD–VIDEO
ISO9660
D I S C
1
T R A C K
1
VCD[PBC ON]
Information
Track Time
P – T I M E
VCD_V20
VIDEO_CD
NO ACCESS
NO DISC
E–04
0 0 : 0 1 : 1 0
Indicator
S T A T U S
3
L R B O T H
"P-TIME"
M O D E
VCD[PBC OFF], CD-DA
Information
E–15
Indicator
Track Time
Disc time
Remaining time of entire disc
"P-TIME"
"A-TIME"
"R-TIME"
2 Select the Disc
Move the Joystick to front or back side.
Press the [ENTER] button.
MP3
Disc
Select items
Information
Display
DVD
VCD
CD-DA
The DVD will start playing.
The VCD will start playing.
The CD-DA will start playing. Refer to the
Track List Screen.
File Time
Remaining time of file
"P-TIME"
"R-TIME"
MP3
The MP3 will start playing. Refer to the
File List Screen.
Canceling the List mode
Press the [LIST] button.
— 17 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of remote control
Track List Screen (CD-DA)
File List Screen (MP3)
1 Starting CD-DA
Refer to the List mode.
1 Starting MP3
Refer to the List mode.
2 Switching to the track list screen
Press the [ENTER] button.
2 Switching to the file/folder list screen
Press the [ENTER] button.
ISO9660
I N F O R M A T I O N
FOLDER–2
..
I N F O R M A T I O N
AUDIO–CD
TRACK–01
TRACK–02
TRACK–03
TRACK–04
TRACK–05
TRACK–06
TRACK–07
TRACK–08
TRACK–09
I N F O R M A T I O N
..
D I S C
4
D I S C
4
D I S C
1
FOLDER–1
FOLDER–2
FILE0–01.MP3 P – T I M E
F O L D E R
F I L E
1
1
FOLDER–2–1 F O L D E R
FILE2–01.MP3 F I L E
3
1
T R A C K
2
FILE2–02.MP3 P – T I M E
P – T I M E
FILE0–02.MP3
FILE0–03.MP3 S T A T U S
N A M E
0 0 : 0 2 : 1 5
FILE2–03.MP3
0 0 : 0 2 : 1 5
0 0 : 0 1 : 1 0
3
FILE2–04.MP3 S T A T U S
N A M E
FILE2–05.MP3
3
S T A T U S
3
FILE0–04.MP3
L R B O T H
FILE0–05.MP3 F I L E 0 – 0 1 . M P 3
FILE0–06.MP3 M O D E
FILE2–06.MP3 F I L E 2 – 0 1 . M P 3
FILE2–07.MP3 M O D E
M O D E
3 Select the track list
Move the Joystick to left or right side.
3 Select the file/folder list
Move the Joystick to left or right side.
4 Select the track
Move the Joystick to front or back side.
Press the [ENTER] button.
4 Select the file/folder
Move the Joystick to front or back side.
Press the [ENTER] button.
Display
Select items
Scrolling the track list
File
Folder
.."
The MP3 file will start playing.
Move to a folder.
Move to an upper-level folder.
1 Stopping playback
Press the [7] button.
"
2 Press the [4] or [¢] button.
Returning to the List mode
Scrolling the file/folder list
1 Stopping playback
Press the [7] button.
1 Select the disc title
Move the Joystick to left or right side.
2 Press the [4] or [¢] button.
Returning to the List mode
2 Returning to the list screen
Press the [ENTER] button.
1 Select the disc/folder title
Move the Joystick to left or right side.
— 18 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferences
2 Returning to the list screen
Press the [ENTER] button.
Display
Select items
RESUME
RETURN
Disc
Folder
Returning to the list screen.
Move to an upper-level folder.
ENTER/
Joystick
7
[#0]–[#9]
SETUP
CLEAR
<SETUP screen>
–
–
–
–
SETUP
LANGUAGE
AUDIO
DISPLAY
PARENTAL
EXIT SETUP
GO TO LANGUAGE SETTING
— 19 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferences
Setup mode
–
–
–
–
INPUT LANGUAGE CODE
LANGUAGE SETTING
1 Stopping playback
en
ORIGINAL
1
e
1
n
4
4
AUDIO LANG
SUB–T LANG
MENU LANG
SETUP LANG
LANGUAGE NUMBER:
Press the [7] button.
2 Enter Setup mode
Press the [SETUP] button.
MAIN PAGE
3 Select the setup item
Move the Joystick.
CHANGE AUDIO LANGUAGE
PLEASE INPUT LANGUAGE CODE
Press the [ENTER] button.
2 Select the language item
Display
Move the joystick to select an item.
Press the [ENTER] button.
"LANGUAGE"
"AUDIO"
"DISPLAY"
"PARENTAL"
page 20
page 23
page 24
page 24
"AUDIO LANG"
Set the audio language produced from the speakers.
Display
Setting
4 Exit Setup mode
Select "EXIT SETUP" and press the [ENTER] button.
Example "en"
The display switches to the language
number input screen.
The original language of a disc.
Canceling the Setup mode
"ORIGINAL"
Press the [SETUP] or [RESUME] button.
"SUB–T LANG"
Set the language of the subtitles displayed on the screen.
Display
Setting
Setting the Priority Language
Example "en"
The display switches to the language
number input screen.
The original language of a disc.
No subtitle is displayed
1 Select "LANGUAGE" mode
See <Setup mode> to select "LANGUAGE".
"ORIGINAL"
"OFF"
"MENU LANG"
Set the language used for the menus (title menu, etc.).
Display
Setting
Example "en"
The display switches to the language
number input screen.
"ORIGINAL"
The original language of a disc.
— 20 —
Download from Www.Somanuals.com. All Manuals Search And Download.
"SETUP LANG"
Set the setup, message or other display languages.
Display
Setting
"ENGLISH"
Set the English
Set the Japanese
日本語
"
"
3 Select the language (Language number input screen)
Press the number buttons.
See "List of language codes" to input a 4-digit code.
Press the [ENTER] button.
Returning to the Previous screen
Press the [RETURN] button.
— 21 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferences
1307 ku Kurdish
1311 ky Kirghiz
List of language codes
1313 la
1327 lo
1334 lv
Latin
Laothian
Latvian, Lettish
1326 ln
1332 lt
Lingala
Lithuanian
Code
Language
Code
Language
1027 aa Afar
1028 ab Abkhazian
1039 am Amharic
1045 as Assamese
1052 az
1057 be Byelorussian
1060 bh Bihari
1066 bn Bengali, Bangla
1070 br
1093 co Corsican
1103 cy Welsh
1109 de German
1142 el
1145 eo Esperanto
1150 et
1157 fa
1166 fj
1174 fr
1183 ga Irish
1194 gl
1203 gu Gujarati
1217 hi
1345 mg Malagasy
1349 mk Macedonian
1352 mn Mongolian
1356 mr Marathi
1358 mt Maltese
1365 na Nauru
1032 af
1044 ar
Afrikaans
Arabic
1347 mi Maori
1350 ml Malayalam
1353 mo Moldavian
1357 ms Malay
1363 my Burmese
1369 ne Nepali
1379 no Norwegian
1403 om (Afan) Oromo
1417 pa Punjabi
1435 ps Pashto, Pushto
1463 qu Quechua
1051 ay Aymara
1053 ba Bashkir
1059 bg Bulgarian
Azerbaijani
1061 bi
Bislama
1376 nl
Dutch
1067 bo Tibetan
1079 ca Catalan
1097 cs Czech
1105 da Danish
1130 dz Bhutani
1144 en English
1149 es Spanish
1151 eu Basque
Breton
1393 oc Occitan
1408 or
1428 pl
1436 pt
Oriya
Polish
Portuguese
Greek
1481 rm Rhaeto-Romance
1483 ro Romanian
1491 rw Kinyarwanda
1498 sd Sindhi
1502 sh Serbo-Croatian
1505 sk Slovak
1507 sm Samoan
1509 so Somali
1482 rn
1489 ru
Kirundi
Russian
Estonian
Persian
Fiji
1495 sa Sanskrit
1501 sg Sangro
1165 fi
1171 fo
1181 fy
Finnish
Faeroese
Frisian
French
1503 si
1506 sl
Singhalese
Slovenian
1186 gd Scots Gaelic
1196 gn Guarani
1209 ha Hausa
Galician
1508 sn Shona
1511 sq Albanian
1513 ss Siswati
1515 su Sundanese
1517 sw Swahili
1512 sr
1514 st
Serbian
Sesotho
Hindi
1226 hr
Croatian
1229 hu Hungarian
1516 sv Swedish
1233 hy Armenian
1235 ia
1245 ik
1253 is
1257 iw Hebrew
1269 ji Yiddish
1287 ka Georgian
1298 kl Greenlandic
Interlingua
Inupiak
Icelandic
1521 ta
1527 tg
1529 ti
1532 tl
1535 to
1539 ts
Tamil
Tajik
Tigrinya
Tagalog
Tonga
Tsonga
1239 ie
1248 in
1254 it
1261 ja
Interlingue
Indonesian
Italian
1525 te
1528 th
1531 tk
1534 tn
1538 tr
1540 tt
Tegulu
Thai
Turkmen
Setswana
Turkish
Tatar
Japanese
1283 jw Javanese
1297 kk Kazakh
1299 km Cambodian
1301 ko Korean
1543 tw Twi
1300 kn Kannada
1305 ks Kashmiri
1557 uk Ukrainian
1572 uz Uzbek
1564 ur
1581 vi
Urdu
Vietnamese
— 22 —
Download from Www.Somanuals.com. All Manuals Search And Download.
1587 vo Volapuk
1632 xh Xhosa
1684 zh Chinese
1613 wo Wolof
1665 yo Yoruba
1697 zu Zulu
"OPT-PCM"
If connecting through digital audio equipment
without any Dolby Digital or DTS decoder,
If connecting with digital audio equipment without any Dolby Digital
or DTS decoder, select “OPT-PCM” for the setting. If the setting is
"OPT-RAW", it may cause a large sound or noise, which can result in
failure.
Setting the Audio
• "ANALOG": To output analog signal but no digital signal.
• "OPT-RAW": To output bit-stream signal if playing with Dolby Digital
or DTS. If playing with MPEG or linear PCM, you obtain the output
with PCM. No analog signal is output.
1 Select "AUDIO" mode
See <Setup mode> to select "AUDIO".
• "OPT-PCM": To output with PCM if playing with Dolby Digital,
MPEG or linear PCM. If playing with DTS, you obtain no output.
No analog signal is output.
–
–
–
–
AUDIO SETTING
D-RANGE
AUDIO-OUT
OFF
ON
MAIN PAGE
DYNAMIC RANGE COMPRESSION
2 Select the audio
Move the joystick to select an item.
Press the [ENTER] button.
"D-RANGE"
Display
Setting
"OFF"
"ON"
For the regular sound
For more powerful sound at regular volumes
"AUDIO-OUT"
Setting digital output type.
Display
Setting
"ANALOG"
If connecting through a center unit or RCA
cable,
"OPT-RAW"
If connecting through a Dolby Digital or DTS
decoder
— 23 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Preferences
See <Setup mode> to select "PARENTAL".
Setting the Screen Mode
Use the procedure described below to set the output screen.
–
–
–
–
–
–
–
–
PARENTAL SETTING
VERIFY PASSWORD
LEVEL
PASSWORD
OFF
8
:
XXXX
PASSWORD
1 Select "DISPLAY" mode
See <Setup mode> to select "DISPLAY".
7
6
5
–
–
–
–
DISPLAY SETTING
4
3
MAIN PAGE
2
1
TV ASPECT
16:9 WIDE
4:3 P&S
4:3 LB
SET PARENTAL LEVEL
INPUT PASSWORD
2 Setting the "LEVEL"(Parental Level)
Move the joystick to select an item.
Press the [ENTER] button.
MAIN PAGE
SET TV ASPECT
Display
Setting
"OFF"
"8"
Canceling the parental lock.
Plays any software (including adult-, general- and
children-oriented).
2 Select the "TV ASPECT"
Move the joystick to select an item.
Press the [ENTER] button.
"7" – "2"
"1"
Plays general- and children-oriented DVD software.
Restricts playback of adult-oriented DVD software.
Plays children-oriented software.
Restricts playback of adult and general-oriented DVD
software.
Display
Setting
"16:9 WIDE"
Set the picture mode of the wide-screen monitor
to “FULL”
Wide-screen software with pan & scan
specification is played in a panned & scanned
screen (with the left and right sides cut off).
Wide-screen software with pan & scan
specification is played in a letter box screen (with
black stripes on the top and bottom).
"4:3 P&S"
"4:3 LB"
Parental level varies with the discs.
3 Enter the password
Press the number buttons.
Enter your password ( 4-digit ). Input numbers are displayed “X”.
Press the [ENTER] button.
• If you enter the wrong number, press the [CLEAR] button. The
entered number is cleared.
• The password’s initial value is 0000.
Setting the Rating Level (parental lock)
Use this function to restrict the viewing of movies to children of
appropriate age levels only.
• Pressing the Reset button erases the password.
To change the password
Select "PASSWORD" and press the [ENTER] button.
1 Select "PARENTAL" mode
— 24 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of center unit
Display
Setting
"CURRENT PWD"
"NEW PWD"
To enter your current password correctly
To enter a new password
"REENTER PWD"
To enter the new password again for
confirmation
Button Name and Functions of Center unit
• Some discs may request that you change the rating level set in
the default settings during playback. In this case, the rating level
setup screen is displayed, if you do not input the correct password
either playback does not continue or a picture for a different rating
level is played.
• Write down the password on a piece of paper and store the piece
of paper somewhere in case you forget it.
• On undated DVDs, playback will not be restricted even if the rating
level is set.
[SRC]: Selecting the Source
[38]: Pause and Play
[DISC–]: Making a Reverse Disc Search (Album Search)
[DISC+]: Making a Forward Disc Search (Album Search)
[4]: Making a Reverse Track Search
[¢]: Making a Forward Track Search
[SCN]/[SCAN]: Track Scan
[REP]: Track Repeat (Track/Disc(Album) Repeat)
[D-REP]: Disc Repeat (Album Repeat)
[RDM]: Random Play
• Once set, this rating level remains in memory until changed. To
enable the play of discs of higher rating levels or to cancel the
parental lock, the setting must be changed.
• Not all DVDs provide a Parental Lock feature. If you are unsure
about a DVD, play it first to confirm. Do not leave DVDs accessible
to young children for whom you deem them inappropriate.
Some functions may be disabled depending on center units. Also
see operation manual of your center unit.
DVD: Title time
VCD, CD-DA: Track time
MP3: File time
Disc number
DVD: Title number
VCD, CD-DA: Track number
MP3: File number
— 25 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of center unit
Hold down on the [4] button.
Release your finger to play the disc at that point.
Playing Disc
Press the [SRC] button.
Search is carried out at the 6x speed.
Select the "CD-CH"/"DISC"/"AUX" display.
You cannot view video pictures whilst the vehicle is moving. To
enjoy video pictures, find a safe place to park and engage the
parking brake. (Video output for front seats)
• It takes time for the unit to check each medium to see if it
contains any MP3 file before it starts playing the medium.
• File No. may not be shown depending on center units to be
connected if the number is 100 or 200.
Disc Search
Selecting the disc you want to hear.
Press the [DISC–] or [DISC+] button.
Select the source mode of this unit on the center unit to operate
this unit linked with the center unit.
• Before selecting a source of this unit on the center unit
– Turn on/off the power on the remote controller.
• After selecting a source of this unit on the center unit
– Select the source mode of this unit to turn it on.
– Select the other modes to turn off this unit.
Track/Chapter Search
Press the [4] or [¢] button.
Disc
Search
– Cannot turn off this unit on the remote controller.
DVD
Searching for a chapter
Searching for a select
Searching for a track
Searching for a file
VCD[PBC ON]
VCD[PBC OFF], CD-DA
MP3
Pausing and Restarting Disc Play (DVD, VCD, CD-DA)
Press the [38] button to make the disc pause.
Press the [38] button again to start play again.
• The following operation may not be available with certain discs.
• For MP3, Refer to <Folder Select Mode>. (page 26)
Folder Select Mode (MP3)
Selecting the folder you want to hear.
1 Stopping play and Folder Select mode
Press the [38] button.
Fast Forwarding and Reversing (DVD, VCD, CD-DA)
File No. display changes to Folder No. display during the Folder
select mode.
Fast Forwarding
Hold down on the [¢] button.
Release your finger to play the disc at that point.
2 Selecting the folder
Press the [DISC–] or [DISC+] button.
Reversing
3 Decide the folder to play
— 26 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the [38] button.
The Folder Select mode releases, and the MP3 in the folder
being displayed is played.
Track Scan (VCD, CD-DA)
Playing the first part of each song on the disc you are listening
to and searching for the song you want to listen to.
(VCD: When the PBC function is set to [OFF]. page 14)
1 Start Track Scan
Press the [SCN] button.
Scan starts from the first track.
Direct Disc Search (Function of remote)
Doing Disc Search by entering the disc number.
2 Release it when the song you want to listen to is played
Press the [SCN] or [38] button.
1 Enter the disc number
Press the number buttons on the remote.
Input "0" to select disc 10.
2 Do Disc Search
Press the [DISC+] or [DISC–] button.
Canceling Direct Disc Search
Press the [38] button.
Direct Track/Chapter Search (Function of remote)
Doing Track/Chapter Search by entering the track/chapter
number.
1 Enter the track/Chapter number
Press the number buttons on the remote.
Direct Track/Chapter Search is enabled for up to 99.
2 Do Track/Chapter Search
Press the [4] or [¢] button.
Canceling Direct Track/Chapter Search
Press the [38] button.
— 27 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations of center unit
song.
Repeat Play
(VCD: When the PBC function is set to [OFF]. page 14)
Press the [REP] or [D-REP] button.
Each time the button is pressed the Repeat Play switches as
shown below.
Magazine Random Play
Magazine Random Play is disabled in this unit.
Track Repeat ON:
Disc
Repeat play
DVD
VCD[PBC OFF]
CD-DA
Chapter Repeat
Track Repeat
Track Repeat
File Repeat
Disc Naming (DNPS)
The disc name preset function can register names of up to 29
discs using up to 12 characters for each disc name.
The availability of this function as well as the number of discs
which can be registered using this function and the number of
usable characters may be variable depending on the control unit
in use.
MP3
Disc Repeat ON:
Disc
Repeat play
DVD
MP3
Title Repeat
Folder Repeat
DVD and MP3 recorded media allows you to register a single media
name only.
Repeat OFF:
Disc
Repeat play
DVD
VCD[PBC OFF]
CD-DA
Repeat Off
Repeat Off
Repeat Off
Repeat Off
MP3
Random Play (VCD, CD-DA, MP3)
Play all the songs on the disc or MP3 folder in random order.
(VCD: When the PBC function is set to [OFF]. page 14)
Press the [RDM] button.
Each time the button is pressed Random Play turns ON or OFF.
• When the [¢] button is pressed, the next song select starts.
• When the [4] button is pressed, the beginning of the current
— 28 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Installation Procedure
1. To prevent short circuits, remove the key from the ignition and
External view
External view
......... Number of items
disconnect the - terminal of the battery.
......... Number of items
2. Make the proper input and output wire connections for each unit.
3. Connect the wire on the wiring harness.
4. Install the unit in your car.
5. Reconnect the - terminal of the battery.
2WARNING
1
2
3
4
5
6
7
8
9
0
!
@
#
$
%
.........1
.........1
.........4
.........6
.........1
.........1
.........1
.........1
.........4
.........1
.........1
.........1
.........1
.........1
If you connect the ignition wire (red) and the battery wire (yellow)
to the car chassis (ground), you may cause a short circuit, that in
turn may start a fire. Always connect those wires to the power
source running through the fuse box.
2CAUTION
• If your car is not prepared for this special connection-system,
consult your Kenwood dealer.
• Make sure that all wire connections are securely made by
inserting jacks until they lock completely.
• If your vehicle's ignition does not have an ACC position, or if the
ignition wire is connected to a power source with constant
voltage such as a battery wire, the power will not be linked with
the ignition (i.e., it will not turn on and off along with the
ignition). If you want to link the unit's power with the ignition,
connect the ignition wire to a power source that can be turned
on and off with the ignition key.
• If the fuse blows, first make sure that the wires have not caused
a short circuit, then replace the old fuse with one with the same
rating.
• Insulate unconnected wires with vinyl tape or other similar
material. To prevent short circuits, also do not remove the caps
on the ends of the unconnected wires or the terminals.
• After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
NO
.
1
N
O.
6
2
7
3
8
4
9
10
5
.........1
The use of any accessories except for those provided might result in
damage to the unit. Make sure only to use the accessories shipped with
the unit, as shown above.
— 29 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Wires to Terminals
■ Power wire connection
2 CAUTION
Caution on power wire connection
• Be sure that the ground wire is connected to the chassis of a vehicle.
• Connect to another component after having connected the power/ground wire.
• If connecting to a center unit, you must connect the power/ground wire of this unit.
Ignition key
switch 41
ACC 44
Fuse (2A) 13
Ignition wire (Red) 7
ACC
Fuse (5A) 13
Battery wire (Yellow) 6
BATT
Car fuse
box
(Main fuse)
42
Car fuse box 45
Ground wire (Black) - (To car chassis) 48
–
+
Battery
43
H
45°
V
Connection wire (Green)
(Accessory5)
H
45°
V
PARKING
To parking brake detection switch
harness of car
2 CAUTION
Picture format selector
switch
Select the NTSC/PAL
position for your monitor.
For the sake of safety, be sure to
connect the parking sensor.
PAL NTSC
Light detector of remote
controller (Accessory8)
Please follow the procedure below to switch the NTSC/PAL switch.
1. Remove the magazine.
2. Turn OFF the power.
3. Set the switch to "NTSC" or "PAL".
4. Turn ON the power.
5. Insert the magazine.
If the magazine is inserted before the power is turned ON, the picture may not
be displayed correctly until the disc is played.
— 30 —
Download from Www.Somanuals.com. All Manuals Search And Download.
■ To connect this unit to a monitor unit for use solely
Video output for rear seats.
(Yellow)
VIDEO
OUTPUT
REAR
VIDEO
OUTPUT
Monitor unit
FRONT
H
45°
V
Video output for front
seats. (Yellow)
(Accessory6)
H
45°
V
Audio output
(Left: White,
Right: Red)
■ When your car audio is Kenwood center unit
To monitor unit
for rear seats.
Video output for rear seats.
(Yellow)
When the source mode of this
unit is not selected in the
center unit, you can use this
unit solely.
VIDEO
OUTPUT
REAR
VIDEO
OUTPUT
FRONT
H
45°
V
Monitor unit
for front seats.
Video output for front
seats. (Yellow)
H
45°
V
(Accessory6)
Audio output
(Left: White,
Right: Red)
Center unit
TO
DVD CH
Changer control cable
(Accessory7)
— 31 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Wires to Terminals
■ When your car audio has RCA input
To monitor unit
for rear seats.
Video output for rear seats.
(Yellow)
VIDEO
OUTPUT
REAR
VIDEO
Monitor unit
for front seats.
OUTPUT
FRONT
H
45°
Video output for front seats.
(Yellow)
V
(Accessory6)
H
45°
V
Car audio with
RCA input.
Audio output
(Left: White,
Right: Red)
■ This is used to connect to a digital audio device
To monitor unit
for rear seats.
Video output for rear seats.
(Yellow)
VIDEO
OUTPUT
REAR
VIDEO
Monitor unit
for front seats.
OUTPUT
FRONT
H
45°
Video output for front seats.
(Yellow)
V
(Accessory6)
H
45°
V
No connect.
Optical digital output
Digital amplifier/
DTS decoder etc.
Optical cable
(commercially available)
Set “AUDIO OUT” depending on digital equipment to be connected. (See page 23)
— 32 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■ Removing the transportation screws
■ Horizontal installation
Set "H" for all the four angle
adjustment parts on both sides.
Cover the holes indicated by
"3"/" " with the dustproof
seals !, @.
Remove all 3 transportation
H
45°
V
screws for protecting the
internal mechanism before
you start to install the unit.
After removing the transport
screw, retain it carefully and
attach it again before
3
H
45°
V
3
“H”
H
45°
V
3
3
3
Use the holes marked "●" to
install the unit.
H
3
45°
V
3
transporting the unit again.
Accessory 4
Cover the holes indicated by
"3" with the dustproof seals
!.
Accessory 3
(M5 x 8)
(Ø5 x 12)
Transportation screws
■ Angle adjustment switches
Horizontal installation
The angle adjustment
switches on the both side
of the unit are to be set
according to the angle of
installation of the DVD/CD
auto changer. Set both of
the 4 switches to the same
position. If the switches
are not set properly, sound
skip or other malfunction
may occur.
H
H
45°
45°
V
V
H
H
45°
45°
V
V
Accessory 1 (L)
Ø3.6
Vertical installation
Accessory 1 (R)
At a 45° angle
— 33 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■ Vertical installation
“V”
■ At a 45° angle installation
Set "V" for all the four
angle adjustment parts on
both sides.
Cover the holes indicated
by "3"/" " with the
dustproof seals !, @.
Use the holes marked "●"
to install the unit.
Set "45°" for all the four
angle adjustment parts on
both sides.
Cover the holes indicated
by "3"/" " with the
dustproof seals !, @.
Use the holes marked "●"
to install the unit.
“45°”
3
3
3
3
Accessory 3
(Ø5 x 12)
Accessory 3
(Ø5 x 12)
Accessory 4
(M5 x 8)
Accessory 4
(M5 x 8)
Ø3.6
Accessory 2 (L)
Ø3.6
Accessory 2 (L)
Accessory 2 (R)
Accessory 2 (R)
<When your car audio is
Kenwood center unit>
Changer control cable
(Accessory7)
— 34 —
Download from Www.Somanuals.com. All Manuals Search And Download.
■ In case of hanging in the trunk
■ Mounting the remote controller
Set "H" for all the four angle
Light detector of remote
controller (Accessory8)
H
45°
adjustment parts on both sides.
Cover the holes indicated by
"3"/" " with the dustproof
seals !, @.
V
3
H
45°
V
3
Clear the surface to be
affixed with
accessories0.
“H”
H
45°
V
Use the holes marked "●" to
install the unit.
H
3
45°
V
3
Accessory 9
Accessory #
Accessory 1 (L)
Ø3.6
Accessory 1 (R)
Accessory $
(M3 x 8 mm)
Accessory $
Accessory 4
(M5 x 8)
Accessory 3
(Ø5 x 12)
— 35 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
☞ Replace both two batteries of the remote controller with new
What might seem to be a malfunction in your unit may
just be the result of slight misoperation or miswiring.
Before calling service, first check the following table
for possible problems.
ones.
✔
✔
The remote controller does not work.
☞ See <Connecting Wires to Terminals> to connect the light
detector of the remote controller correctly.
? The power does not turn ON.01
A center unit not applicable is connected.
☞ See <IMPORTANT INFORMATION> (page 4).
✔
The fuse has blown.
☞ After checking for short circuits in the wires, replace the fuse with
one with the same rating.
? The memory is erased when the ignition is turned OFF.10
✔
The battery wire has not been connected to the proper terminal.
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
✔
✔
No ACC position on vehicle ignition.02
☞ Connect the same wire to the ignition as the battery wire.
The remote controller does not work.
✔
The ignition and battery wire are incorrectly connected.11
☞ Connect the wire correctly, referring to the section on
<Connecting Wires to Terminals>.
☞ See <Connecting Wires to Terminals> (page 30) to connect the
light detector of the remote controller correctly.
? The power cannot be turned off
? No sound can be heard, or the volume is low.
✔
You select the source mode of this machine, which is connected to a
center unit.
✔
The audio setting of audio output is not “ANALOG”.
☞ If connecting through a center unit or RCA cable, select
“ANALOG” for this setting.
☞ The power cannot be turned off because the center unit is under
operation. If changing a mode other than the source mode of this
machine on the center unit, you can turn off the power.
✔
The input/output wires or wiring harness are connected incorrectly.22
☞ Reconnect the input/output wires or the wiring harness correctly.
See the section on <Connecting Wires to Terminals>.
? The power is automatically turned off.
✔
You switched the source mode while connecting to a center unit.
☞ If selecting the source mode of this machine on the center unit
and then switching to a mode other than this machine, you can
turn off the power.
? The specified disc does not play, but another one plays instead.52
✔
✔
✔
The specified DVD/CD is quite dirty.
☞ Clean the Disc.
The disc is upside down.
☞ Set the disc with the label face downward.
? No video image appears.
✔
The unit is not connected to the parking brake detection switch.
☞ Make proper connections according to <Connecting Wires to
Terminals>.
The disc is severely scratched.55
☞ Try another disc instead.
✔
The parking brake is not engaged.
? The specified track will not play.58-a
☞ For safety reasons no video images are displayed while the
vehicle is moving. Engaging the parking brake will cause images
to be displayed.
✔
Random play has been selected.
☞ Turn off random play.
? Cannot play CD-R or CD-RW.60
✔
The setting of the NTSC/PAL switch is incorrect.
✔
Finalization processing is not being conducted for CD-R/CD-RW.
☞ Set the NTSC/PAL switch correctly.
☞ Conduct finalization processing with CD recorder.
? Nothing happens when the buttons are pressed.04
? A VCD cannot be played using menus.
✔
The " " symbol appears in the screen.
☞ You cannot carry out any operation disabled by disc.
✔
The VCD disc being played is not compatible with P.B.C.
☞ Menu playback is available only with VCD discs recorded with
P.B.C.
✔
The batteries of the remote controller are weak.
— 36 —
Download from Www.Somanuals.com. All Manuals Search And Download.
? The subtitle is not displayed.
?Noise or no sound generated when an MP3 is played.70
✔
The DVD disc being played does not contain the recording of
subtitles.
✔
The track has the MP3 track name extension while it is not an MP3.
☞ Do not use the ".MP3" extension in non-MP3.
☞ The subtitle cannot be displayed when the DVD disc being played
does not contain the recording of subtitles.
? Takes time before the unit starts playing MP3.71
✔
The medium contains many albums, tracks, and hierarchical levels.
☞ The unit checks all tracks on the loaded medium first. If the
medium has many tracks recorded, it may take a long time for the
unit before it starts playing MP3.
? The voice (or subtitle) language cannot be changed.
✔
The DVD disc being played does not contain the recording of more
than one audio (or subtitle) language.
☞ The voice (or subtitle) language cannot be changed when the DVD
disc being played does not contain the recording of more than one
voice (or subtitle) language.
? Fails to play MP3 in the intended order.72
✔
The MP3 tracks were not written by the CD writer in the order in
which you wanted them to be played.
? The viewing angle cannot be changed.
☞ Depending on the CD writer, you may be able to set the order in
which MP3 tracks are to be played by writing them onto a
medium with their track names beginning with play sequence
numbers such as "01" to "99".
✔
The DVD disc being played does not contain the recording of more
than one angle.
☞ The viewing angle cannot be changed when the DVD disc being
played does not contain the recording of more than one angle.
? The sound skips when an MP3 is being played.73-1
✔
You are attempting to switch the angle in a DVD section where more
than one angle is not recorded.
✔
The media is scratched or dirty.
☞ Clean the media, referring to the section on <Disc cleaning>
☞ More than one viewing angle may be recorded only in limited
sections in a disc.
(page 6).
✔
The recording condition is bad.73-2
☞ Record the media again or use another media.
? Playback will not start even after a title is selected.
✔
A viewing restriction (RATING) has been set for the disc.
☞ Check the viewing restriction level (RATING) setting.
? Can’t enter Folder Select mode.76
✔
There’s no folder recorded in the MP3 media.
? The voice or subtitle language selected in the initial setting is not
played.
☞ Use a media with levels.
? The songs in the selected folder aren’t played in Folder Select
✔
The DVD disc being played does not contain the recording of the
selected voice or subtitle language.
mode.77
✔
There are no MP3 in the selected folder.
☞ Make sure there’s recorded content in the MP3 media.
☞ Use a DVD disc containing the recording of the selected voice or
subtitle language.
? The MP3 track/disc search takes time.78
MP3 source
✔
Many tracks are recorded on the media.
☞ When the media directory is complex, the track/disc search can
take time.
? Cannot play an MP3.67
✔
✔
✔
Not conforming to ISO 9660 Level 1/2, and Joliet.
☞ Use a medium conforming to ISO 9660 Level 1/2, and Joliet.
The MP3 has no or invalid track name extension.68
☞ Add the ".MP3" extension to the MP3 track name.
The media is scratched or dirty.69
☞ Clean the media, referring to the section on <Disc cleaning>
(page 6).
— 37 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
The messages shown below display your systems
condition.
E-01:EJECT: No disc magazine has been loaded. The disc
magazine is not completely loaded.E01
➪ Load the disc magazine properly.
NO DISC:
E-04:
No disc has been loaded in the disc magazine.E02
➪ Load a disc into the disc magazine.
The Disc is quite dirty. The Disc is upside-down. The
Disc is scratched a lot.
➪ Clean the Disc and load it correctly.
E-15:
• The disc cannot be played because of its
unacceptable format.
• A disc that cannot be read is set.
➪ Use another disc.
A file with unacceptable format is included.
E-99:
Something is wrong with the disc magazine. Or the
unit is malfunctioning for some reason.E99
➪ Check the disc magazine. And then press the reset
button on the unit. If the "E-99" code does not
disappear, consult your nearest service center.
NO NAME:
Attempted to display DNPS during the CD play having
no disc names preset.E51
NO ACCESS: No playback has been performed after the disc
was set into the disc changer.
WRONG REGION!!: The DVD software encoded for other region
code.
— 38 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Region codes in the world
The DVD players are given a region code according to the country or area it is marketed, as shown in the following map.
1
5
2
1
2
1
4
5
2
4
— 39 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications subject to change without notice.
Player section
D/A conversion ............................................................8 Level ∆∑
Wow and flutter ......................................Below measurable limit
Frequency response (Sampling frequency; 96 kHz)
....................................................................20 Hz - 44 kHz
Total harmonic distortion ......................................0.01 % (1 kHz)
Signal to noise ratio ..........................................................110 dB
Dynamic range ....................................................................90 dB
Channel separation..............................................................90 dB
Disc format ............DVD-VIDEO / VIDEO CD / CD-DA / CD-ROM
MP3 decoder...........Compliant with MPEG-1.0/2.0 Audio Layer-3
General
Audio output level / Load ...........................................1.2 V/10 kΩ
Video output level......................................................1 Vp-p/75 Ω
Operating voltage (11 – 16V allowable) ..............................14.4 V
Current consumption...............................................................3 A
Dimensions (W x H x D) ................................250 × 80 × 200 mm
9-13/16 × 3-1/8 × 7-7/8 in.
Weight...................................................................6.2 lbs (2.8 kg)
— 40 —
Download from Www.Somanuals.com. All Manuals Search And Download.
|