DNX890HD
DNX7700BT
DNX690HD
DNX570HD
DNX5080EX
DNX5700BT
GPS NAVIGATION SYSTEM
Quick Start Guide
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX890HD/ DNX7700BT/ DNX690HD/ DNX570HD/ DNX5080EX/ DNX5700BT Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2012 JVC KENWOOD Corporation
B59-2176-00/00 (K/K2/R)
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
unlikely event that a child swallows the battery,
immediately consult a physician.
Precautions
Protecting the monitor
2WARNING
To protect the monitor from damage, do not
operate the monitor using a ballpoint pen or
similar tool with the sharp tip.
To prevent injury or fire, take
the following precautions:
Lens fogging
• To prevent a short circuit, never put or leave
any metallic objects (such as coins or metal
tools) inside the unit.
• Do not watch or fix your eyes on the unit’s
display when you are driving for any extended
period.
When you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the disc player of the unit. Called
lens fogging, this condensation on the lens
may not allow discs to play. In such a situation,
remove the disc and wait for the condensation
to evaporate. If the unit still does not operate
normally after a while, consult your Kenwood
dealer.
• If you experience problems during installation,
consult your Kenwood dealer.
Precautions on using this unit
Precautions on handling discs
• When you purchase optional accessories, check
with your Kenwood dealer to make sure that
they work with your model and in your area.
• You can select language to display menus,
audio file tags, etc. See Language setup
(P.89) in the Instruction Manual.
• The Radio Data System or Radio Broadcast Data
System feature won’t work where the service is
not supported by any broadcasting station.
• The unit may not function properly if the
connectors between the unit and front panel
are dirty. Detach the front panel and clean the
connector with a cotton swab gently, being
careful not to damage the connector.
• Do not touch the recording surface of the disc.
• Do not stick tape etc. on the disc, or use a disc
with tape stuck on it.
• Do not use disc type accessories.
• Clean from the center of the disc and move
outward.
• When removing discs from this unit, pull them
out horizontally.
• If the disc center hole or outside rim has burrs,
use the disc only after removing the burrs with
a ballpoint pen etc.
• Discs that are not round cannot be used.
Precautions on battery
• Put the remote control in a place where it will
not move during braking or other operations. A
dangerous situation could result, if the remote
control falls down and gets wedged under the
pedals while driving.
• Do not leave the battery near fire or under
direct sunlight. A fire, explosion or excessive
heat generation may result.
• 8-cm (3 inch) discs cannot be used.
• Discs with coloring on the recording surface or
discs that are dirty cannot be used.
• This unit can only play the CDs with
.
This unit may not correctly play discs which do
not have the mark.
• You cannot play a disc that has not been
finalized. (For the finalization process see your
writing software, and your recorder instruction
manual.)
• Do not recharge, short, break up or heat the
battery or place it in an open fire. Such actions
may cause the battery to leak fluid. If spilled
fluid comes in contact with your eyes or on
clothing, immediately rinse with water and
consult a physician.
• Place the battery out of reach of children. In the
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Acquiring GPS signal
How to Reset Your Unit
The first time you turn on this unit, you must
wait while the system acquires satellite signals
for the first time. This process could take up
to several minutes. Make sure your vehicle
is outdoors in an open area away from tall
buildings and trees for fastest acquisition.
After the system acquires satellites for the first
time, it will acquire satellites quickly each time
thereafter.
If the unit or the connected unit fails
to operate properly, reset the unit.
Press the <Reset> button.
1
The unit returns to factory settings.
About the front panel
When removing the product from the box or
installing it, the front panel may be positioned
at the angle shown in (Fig. 1). This is due to the
characteristics of mechanism the product is
equipped with.
When the product is first powered on works
properly, the front panel will automatically move
into the position (initial setting angle) shown in
(Fig. 2).
(Fig. 1)
(Fig. 2)
NOTE
Cleaning the Unit
• Disconnect the USB device before pressing
the <Reset> button. Pressing the <Reset>
button with the USB device connected can
damage the data stored in the USB device.
For how to disconnect the USB device, see
How to Play Music (P.16).
• When the unit is turned on after resetting,
the Initial SETUP screen appears. See First
Step (P.6).
If the front panel of this unit is
stained, wipe it with a dry soft cloth
such as a silicon cloth. If the front
panel is stained badly, wipe the
stain off with a cloth moistened with
neutral cleaner, then wipe it again
with a clean soft dry cloth.
• Applying spray cleaner directly to the
unit may affect its mechanical parts.
Wiping the front panel with a hard cloth
or using a volatile liquid such as thinner
or alcohol may scratch the surface or
erase screened print.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Safety Precautions and Important Information
Read this information carefully before starting to
operate the Kenwood Car Navigation System and
follow the instructions in this manual. Neither
Kenwood nor Garmin shall be liable for problems
or accidents resulting from failure to observe the
instructions in this manual.
2CAUTIONS
Failure to avoid the following potentially
hazardous situations may result in injury or
property damage.
The navigation system is designed to provide you
with route suggestions. It does not reflect road
closures or road conditions, weather conditions,
or other factors that may affect safety or timing
while driving.
Use the navigation system only as a navigational
aid. Do not attempt to use the navigation system
for any purpose requiring precise measurement of
direction, distance, location, or topography.
The Global Positioning System (GPS) is operated
by the United States government, which is solely
responsible for its accuracy and maintenance. The
government system is subject to changes that
could affect the accuracy and performance of all
GPS equipment, including the navigation system.
Although the navigation system is a precision
navigation device, any navigation device can be
misused or misinterpreted and, therefore, become
unsafe.
2WARNINGS
Failure to avoid the following potentially
hazardous situations could result in an
accident or collision resulting in death or
serious injury.
When navigating, carefully compare information
displayed on the navigation system to all available
navigation sources, including information from
street signs, visual sightings, and maps. For safety,
always resolve any discrepancies or questions
before continuing navigation.
Always operate the vehicle in a safe manner.
Do not become distracted by the navigation
system while driving, and always be fully aware
of all driving conditions. Minimize the amount of
time spent viewing the screen of the navigation
system while driving, and use voice prompts
when possible.
IMPORTANT INFORMATION
Do not enter destinations, change settings, or
access any functions requiring prolonged use of
the navigation system controls while driving. Stop
your vehicle in a safe and legal manner before
attempting such operations.
Keep the system volume at a low enough level to
be able to hear outside noises while driving. If you
can no longer hear outside noises, you may be
unable to react adequately to the traffic situation.
This may cause accidents.
Vehicle Battery Preservation
This navigation system can be used when the
ignition key is turned to ON or ACC. To preserve
the battery, however, it should be used with the
engine running whenever possible. Using the
navigation system for a long time with the engine
switched off can cause the battery to run down.
Map Data Information
The navigation system will not display the correct
current position of the vehicle the first time it is
used after purchase, or if the vehicle battery is
disconnected. GPS satellite signals will soon be
received, however, and the correct position will
be displayed.
Be careful of the ambient temperature. Using the
navigation system at extreme temperatures can
lead to malfunction or damage. Also note that
the unit can be damaged by strong vibration, by
metal objects, or by water getting inside the unit.
One of the goals of Garmin is to provide
customers with the most complete and accurate
cartography that is available to us at a reasonable
cost. We use a combination of governmental
and private data sources, which we identify
in product literature and copyright messages
displayed to the consumer. Virtually all data
sources contain some inaccurate or incomplete
data. In some countries, complete and accurate
map information is either not available or is
prohibitively expensive.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
First Step
Touch the corresponding
key and set the value.
1
Power on the unit and perform some
setup steps before using.
Press the <MENU> button.
Language
Select the language used for the control
screen and setting items. Default is“American
English (en)”. (Instruction Manual P.89)
After setting, touch [Enter].
Angle
Adjust the position of the monitor. Default is
“0”. (Instruction Manual P.92)
The unit is turned on.
After setting, touch [
].
iPod AV Interface Use
Set the terminal which your iPod is connected
to. Default is“iPod”. (Instruction Manual P.98)
Color
Set the screen and button illumination color.
You can select whether to perform color scan
and adjust scanning color. (Instruction Manual
P.92)
The “Initial setup” is only necessary
when you use the unit for the first
time after purchase, and when you
reset the unit.
After setting, touch [
].
EXT SW
Control the external devices. (Instruction
Manual P.99)
After setting, touch [
].
Camera
Set the parameters for the camera. (Instruction
Manual P.96)
After setting, touch [
].
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
OEM SETUP (North America Sales area
only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
Touch [Finish].
2
NOTE
• For details on operations of each setting,
refer to the Instruction Manual.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Basic Operations
Functions of the Buttons on the Front Panel
DNX890HD/DNX7700BT
10
11
1
2
3
4
5
6
7
8
9
How to insert an SD Card
8
1) Press <0> button for 1 second.
Labelled
side
The panel fully opens.
2) Hold the SD card as the illustration in the right
and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your finger
from the card.
0
The card pops up so that you can pull it out with your
fingers.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Number
Name
Motion
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.119).
1
ATT
• Switches attenuation of the volume on/off.
2
• North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio tuner or SiriusXM (Instruction Manual
P.64).
• Central and South America sales area: Pressing for 1 second turns the
screen off.
∞, 5 (Vol)
Adjusts volume.
3
AUD
• Displays Graphic Equalizer screen (Instruction Manual P.105).*
4
• Pressing for 1 second switches camera view display on/off.
NAV
• Displays the navigation screen.
5
• Pressing for 1 second switches AV out sources.
MENU
• Displays the Top Menu screen (Instruction Manual P.14).
• Pressing for 1 second turns the power off.
6
• When the power off, turns the power on.
TEL
• Displays the Hands Free screen (Instruction Manual P.74).
7
• Pressing for 1 second displays the Voice Recognition screen. (Instruction
Manual P.82)
0 (Eject)
• Ejects the disc.
8
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
Remote
Sensor
Receives the remote control signal.
A slot to insert a disc media.
9
Disc insert
slot
10
11
SD card slot
An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
* The display may not switch to the Graphic Equalizer screen in some conditions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
4
3
2
1
5
6
7
8
9
How to insert a microSD Card
9
1) Open the microSD card slot cover as the illustration
in the right.
2) Hold the microSD card with the label facing up and
the notched section right, and insert it into the slot
until it clicks.
●To eject the card:
Push the card until it clicks and then remove your finger from
the card.
The card pops up so that you can pull it out with your fingers.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Number
Name
Motion
Disc insert
slot
A slot to insert a disc media.
1
0 (Eject)
• Ejects the disc.
2
• Pressing for 1 second ejects the disc forcibly.
fi (Reset)
• If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.119).
3
Remote
Sensor
Receives the remote control signal.
4
MENU
• Displays the Top Menu screen (Instruction Manual P.14).
• Pressing for 1 second turns the power off.
5
• When the power off, turns the power on.
NAV
• Displays the navigation screen.
6
• Pressing for 1 second switches AV out sources.
Volume Knob • Turning adjusts volume up or down.
7
North America Sales area:
• Displays the Tone Control screen (Instruction Manual P.106).*
• Pressing for 1 second stores the tag data of the current music from HD
Radio tuner or SiriusXM (Instruction Manual P.64).
Central and South America sales area
• Pressing switches attenuation of the volume on/off.
• Pressing for 1 second displays Tone Control screen (Instruction Manual
P.105).*
TEL
• Displays the Hands Free screen (Instruction Manual P.74).
8
• Pressing for 1 second displays the Voice Recognition screen. (Instruction
Manual P.82)
microSD
card slot
A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
9
* The display may not switch to the Tone Control screen in some conditions.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Common Operations
General
[Menu]
There are some functions which can
be operated from most screens.
Returns to the Top Menu screen.
Touching for at least 1 second displays the
Screen Control screen. (Even when an image
is dispalyed, touching for at least 1 second
displays the Screen Control screen.)
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The
contents of the menu are as follows.
:
Displays the EXT SW
Control screen.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu screen.
: Displays the control screen of current
source. Icon feature differs depending on
the source.
: Closes the menu.
List screen
There are some common function
(Scroll)
keys in the list screens of most sources.
Scrolls the displayed text.
etc.
Touch keys with various functions are
displayed here.
Displayed keys differ depending on the current
audio source, status, etc.
For examples, see List screen (P.16) in the
Instruction Manual.
Flick scrolling
You can scroll the list screen by flicking the screen up/down or right/left.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
How to Use the Navigation System
Press the <NAV> button to display the navigation screen.
1
Operate the desired function from the Main Menu screen.
2
1
GPS satellite strength.
Finds a destination.
1
2
3
4
5
3
2
Views the map.
Uses the Apps such as ecoRoute and Help.
Adjusts the settings.
5
4
NOTE
• You can get additional information about using the navigation system from Help. To display Help,
touch [Apps] and then touch [Help].
• For more information about your navigation system, download the latest version of the Owner’s
Manual from manual.kenwood.com/edition/im366.
Enter your destination and start the guidance.
3
●Finding points of interest
NOTE
1) Touch [Where To?].
• To enter letters contained in the name,
2) Select a category and a
subcategory.
touch the Search bar and enter the letters.
3) Select a destination.
4) Touch [Go!].
Continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Follow your route to the destination.
4
NOTICE
• The speed limit icon feature is for information only and does not replace the driver’s
responsibility to abide by all posted speed limit signs and to use safe driving judgment at all
times. Garmin and JVC KENWOOD will not be responsible for any traffic fines or citations that
you may receive for failing to follow all applicable traffic laws and signs.
Your route is marked with a magenta line. As you travel, your navigation system
guides you to your destination with voice prompts, arrows on the map, and
directions at the top of the map. If you depart from the original route, your
navigation system recalculates the route.
2
Views the Next Turn page or the junction
view page, when available.
1
1
Views the Turn List page.
2
3
4
5
6
7
8
9
4
Views the Where Am I? page.
Stops the currents route.
5
3
Displays traffic information on the route.
Returns to the Main menu.
Displays a different data field.
Views the Trip Computer.
7
8
9
6
Displays more options.
NOTE
• Touch and drag the map to view a different area of the map.
• A speed limit icon could appear as you travel on major roadways.
●Adding a stop
1) While navigating a route, touch [
2) Search for the extra stop.
] and then touch [Where To?].
3) Touch [Go!].
4) Touch [Add to Active Route] to add this stop before your final destination.
●Taking a detour
1) While navigating a route, touch [
2) Touch [ ].
].
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Other Features
●Manually avoiding traffic on your route
1) From the map, touch the traffic icon.
2) Touch [Traffic On Route].
3) If necessary, touch the arrows to view other traffic delays on your route.
4) Touch [
] > [Avoid].
●Viewing the traffic map
The traffic map shows color-coded traffic flow and delays on nearby.
●About traffic
NOTICE
• Traffic service is not available in some areas or countries.
• Garmin and JVC KENWOOD are not responsible for the accuracy or timeliness of the traffic
information.
With an FM traffic receiver, the navigation system can receive and use traffic information.
When a traffic message is received, you can see the event on the map and change your
route to avoid the incident. The FM TMC subscription activates automatically after your
navigation system acquires satellite signals while receiving traffic signals from the service
●Updating the software
To update the navigation system software, you must have a USB mass storage device
and an internet connection.
2) Find your model and select [Software Updates] > [Download].
3) Read and accept the terms of the Software License Agreement.
4) Follow the instructions on the Web site to complete the installation of the
software update.
●Updating maps
You can purchase updated map data from Garmin or ask your Kenwood dealer or
Kenwood service center for details.
2) Select [Order Map Updates] for your Kenwood unit.
3) Follow the Web site instructions to update your map.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
How to Play Music
You can play audio files from music CD, disc media, USB storage device and iPod.
NOTE
• For details on playable file format, media format, iPod model, etc., refer to the Instruction Manual.
Connect the media you want to play as shown below.
1
Disc
1) Press the <0> button to open the front panel.
2) Insert the disc into the slot.
The panel closes automatically and playback starts.
●To eject the disc:
Press the <0> button.
0
1) Insert the disc into the slot.
Playback starts.
●To eject the disc:
Press the <0> button.
iPod
1) Connect the iPod with the iPod cable.
Playback starts.
●To disconnect the device:
Touch [
1 second.
] on the screen and then touch [ 0 ] for
Disconnect the iPod from the cable.
USB device
1) Connect the USB device with the USB cable.
Playback starts.
●To disconnect the device:
Touch [ 0 ] for 1 second on the screen and
disconnect the device from the cable.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Control the music you are listening to on the source control
screen.
2
The following symbols indicate the keys on the screen.
The functions of the keys are the same despite the difference of the source you are listening to.
Touch [
]
Basic operations from this screen
38
7
Plays or pauses:
Stops playing:
0
Disconnects the device:
Searches the previous/next content:
Fast forwards or Fast backwards (Disc 1 ¡ or
4 ¢
media, CD, USB device only):
Repeats current content:
move the cursor in the center bar
Plays all contents in random order:
NOTE
• For other operations, refer to the Instruction Manual.
• If desired key is not displayed in the multi-function bar, touch the [
] to switch the menu.
Search the track/file you want to listen to.
●List search
3
1) Touch center of the screen.
The content list of the media being played is
displayed.
If the information of the current track only
is displayed, touch [
display.
] to switch the list
●Refined search
1) Touch [ ].
2) Touch the desired refinement method.
The list is refined by the item you selected.
3) Touch the desired item.
NOTE
• For details on searching operations, refer to Search Operation (P.38) in the Instruction Manual.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
How to Play Movie/Picture
You can play DVD video, Video CD (VCD), movie files from disc media, iPod and
picture files from USB storage device.
NOTE
• For details on playable file format, device format, etc., refer to the Instruction Manual.
Connect the media you want to play.
For the method of connecting, see How to Play Music (P.16).
1
Control the movie/picture by touching the screen.
Each area on the screen has a separate function.
2
3
3
1
2
1
2
3
DVD: Displays the DVD menu.*1
Displays the Source • Searches the next/previous content or
Control screen.
file.
VCD: Displays the Zoom Control
screen.*2
• Scrolling from center of display to left
or right performs fast backward or fast
forward.
Disc media: Displays the disc menu.*3
To stop fast backward/forward, touch
center of the display.*4
*1 See DVD Disc Menu Operation (P.25) in the Instruction Manual.
*2 See Zoom Control For DVD And VCD (P.26) in the Instruction Manual.
*3 See Movie Control (P.43) in the Instruction Manual.
*4 For iPod/USB, this function may be unavailable depending on the playing file format.
NOTE
• For operations on the source control screen, see How to Play Music (P.16).
However, searching by category/link/album artwork is not available.
• Touching [
] (displayed by touching [
] in the source control screen) hides all keys.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
How to Listen to the Radio/ HD Radio™ Tuner/ SiriusXM
Touch [Menu] on any screen.
Top Menu screen appears.
1
2
3
Touch [TUNER], [HD Radio], or [SIRIUS XM].
The unit switches to the radio/ HD Radio tuner / SIRIUS XM source.
Operate on the source control screen.
●Station search
1) Touch [ ].
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.
(Radio/ HD Radio tuner only)
3) Radio/ HD Radio tuner:
Touch [4] or [¢] to tune in the desired
station.
SIRIUS XM:
Touch [CH∞] or [CH5] to tune in the desired station.
●Auto memory (Radio/ HD Radio tuner only)
1) Touch [
].
Sub function menu appears.
2) Touch [AM] or [FM] to select the band.
3) Touch [
].
4) Touch [AME].
5) Touch [4] or [¢] in the sub function menu.
Auto memory starts.
●Recalling the preset station
1) Touch [P#].
You can also display the preset list by touching the frequency display in the center.
NOTE
• For other operations, see Radio/HD Radio Tuner Basic Operation (P.54) and SIRIUS XM Basic
Operation (P.57) in the Instruction Manual.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
How to Make a Phone Call
You can use your Bluetooth cell-phone when paired to this unit.
Register your cell-phone to the unit.
1
Follow as the procedures shown below. For detailed operation, see Registering the Bluetooth
Unit (P.75) in the Instruction Manual.
1) Touch [Menu] on any screen.
Top Menu screen appears.
2) Touch [SETUP].
SETUP Menu screen appears.
3) Touch [Bluetooth].
Bluetooth SETUP screen appears.
4) Touch [Search].
Searched Device List screen appears.
5) Touch [PIN Code Set] in the Searched Device
List screen.
6) Enter PIN code and touch [Enter].
7) Select your cell-phone from the displayed list
in the Searched Device List screen.
Registering is completed.
Connect your cell-phone to the unit.
1) Touch the device name you want to connect
2
in the Bluetooth SETUP screen.
2) Touch [ON] of [TEL(HFP)] in the BT
Connection Settings screen.
The selected device is connected to the unit.
When registration of your cell-phone is completed,
the phone book of the cell-phone is automatically
downloaded to this unit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Make or receive a phone call.
See the table below for each operation method.
3
Call by entering a phone number
1Enter a phone number with number keys.
2Touch [
Call using call records
1Touch [ ] (incoming calls), [
2Select the phone number from the list.
3Touch [ ].
Call using the phonebook
1Touch [ ].
].
] (missed calls), or [
] (outgoing calls).
2Select the name from the list.
3Select the number from the list.
4Touch [
Call using the preset number
1Touch [Preset #] to start calling the corresponding phone number.
].
2Touch [
].
Call by voice
You can make a voice call using the voice recognition function of the cell-phone.
1Touch [ ].
2Pronounce the name registered in the cell-phone.
NOTE
• For detailed operation, see Using Hands-Free Unit (P.77) in the Instruction Manual.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
• If the fuse blows, first make sure the wires aren’t
touching to cause a short circuit, then replace
the old fuse with one with the same rating.
• Insulate unconnected wires with vinyl tape or
other similar material. To prevent a short circuit,
do not remove the caps on the ends of the
unconnected wires or the terminals.
Installation Procedure
Before Installation
Before installation of this unit, please
note the following precautions.
• Connect the speaker wires correctly to the
terminals to which they correspond. The unit
may be damaged or fail to work if you share
the wires or ground them to any metal part
in the car.
WARNINGS
• If you connect the ignition wire (red)
and the battery wire (yellow) to the car
chassis (ground), you may cause a short
circuit, that in turn may start a fire. Always
connect those wires to the power source
running through the fuse box.
• Do not cut out the fuse from the ignition
wire (red) and the battery wire (yellow).
The power supply must be connected to
the wires via the fuse.
• When only two speakers are being connected
to the system, connect the connectors either
to both the front output terminals or to both
the rear output terminals (do not mix front
and rear). For example, if you connect the
connector of the left speaker to a front output
terminal, do not connect the connector to a
rear output terminal.
• After the unit is installed, check whether the
brake lamps, blinkers, wipers, etc. on the car are
working properly.
• Mount the unit so that the mounting angle is
CAUTION
• Install this unit in the console of your
vehicle.
Do not touch the metal part of this unit
during and shortly after the use of the
unit. Metal part such as the heat sink and
enclosure become hot.
30° or less.
• This unit has the cooling fan to decrease the
internal temperature. Do not mount the unit
in a place where the cooling fan of the unit are
blocked. Blocking these openings will inhibit
the cooling of the internal temperature and
result in malfunction.
NOTES
• Mounting and wiring this product requires
skills and experience. For best safety, leave the
mounting and wiring work to professionals.
• Make sure to ground the unit to a negative 12V
DC power supply.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or humidity.
Also avoid places with too much dust or the
possibility of water splashing.
• Do not use your own screws. Use only the
screws provided. If you use the wrong screws,
you could damage the unit.
• If the power is not turned ON (“PROTECT”is
displayed), the speaker wire may have a short-
circuit or touched the chassis of the vehicle
and the protection function may have been
activated. Therefore, the speaker wire should
be checked.
Cooling fan
• Do not press hard on the panel surface when
installing the unit to the vehicle. Otherwise scars,
damage, or failure may result.
• Reception may drop if there are metal objects
near the Bluetooth antenna.
• If your car’s ignition does not have an ACC
position, connect the ignition wires to a power
source that can be turned on and off with the
ignition key. If you connect the ignition wire to
a power source with a constant voltage supply,
such as with battery wires, the battery may be
drained.
Bluetooth antenna unit
• If the console has a lid, make sure to install the
unit so that the front panel will not hit the lid
when closing and opening.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Unit
Installation Procedure
Supplied accessories
1
To prevent a short circuit, remove
the key from the ignition and
disconnect the terminal of the
battery.
Make the proper input and
output wire connections for each
unit.
First of all, make sure that all
accessories are supplied with the
unit.
2
1 ...1
2 ...1
3 ...1*
4 ...2
7 ...6
8 ...6
9 ...1
0 ...1
3
4
Connect the speaker wires of the
wiring harness.
Connect the wiring harness wires
in the following order;
ground, battery, ignition.
Connect the wiring harness
connector to the unit.
Install the unit in your car.
Reconnect the terminal of the
battery.
Press the <Reset> button.
(P.4)
5
6
7
8
9
Perform the Initial Setup.
See First Step (P.6).
●Non-Japanese cars
(3.5 m)
5 ...1*
-...1
= ...1
*
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
6 ...1*
(3 m)
Continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
●Toyota, Nissan or Mitsubishi car
●Toyota/Scion cars
7 (M5x6mm) or
8 (M5x7mm)
1) Cut out accessory 5 as illustrated.
Car Bracket
Cutting line
7 (M5x6mm) or
8 (M5x7mm)
5
NOTE
• Make sure that the unit is installed securely
in place. If the unit is unstable, it may
malfunction (eg, the sound may skip).
2) Fold double-sided adhesive
(accessory 6) along the slit
and attach it to accessory 5
cut-out against the center rib
as illustrated. Use 2 pieces of
accessory 6 for 1 accessory 5
cut-out.
Trim plate
Attach accessory 9 to the unit.
3) Attach accessory 5 cut-out to the
unit.
6
9
●General Motors cars
1) Cut out accessory 5 to meet
the shape of the opening of the
center console.
2) Attach accessory 5 to the unit.
Cut out to meet the shape of
the opening in the vehicle.
5
24
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
GPS antenna
Microphone unit
1) Check the installation position of
GPS antenna is installed inside of
the car. It should be installed as
horizontally as possible to allow easy
reception of the GPS satellite signals.
the microphone (accessory =).
2) Clean the installation surface.
3) Install the microphone.
4) Wire the microphone cable up to
the unit with it secured at several
positions using tape or other
desired method.
To mount the GPS antenna inside
your vehicle:
1) Clean your dashboard or other
surface.
2) Remove the separator of the
=
metal plate (accessory -).
3) Press the metal plate (accessory
-) down firmly on your
dashboard or other mounting
surface. You can bend the metal
plate (accessory -) to conform to
a curved surface, if necessary.
4) Remove the separator of the GPS
antenna (accessory 0), and stick
the antenna to the metal plate
(accessory -).
Fix a cable with a commercial item of tape.
0
-
Remove the separator of the
microphone, and stick the
microphone to the place shown
above.
• Depending on the type of car, reception
of the GPS satellite signals might not be
possible with an inside installation.
• The GPS antenna should be installed at
a position that is spaced at least 12 inch
(30 cm) from cellular phone or other
transmitting antennas. Signals from the
GPS satellite may be interfered with by
these types of communication.
Adjust the direction of the
microphone to the driver.
NOTE
• Painting the GPS antenna with (metallic)
paint may cause a drop in performance.
• Install the microphone as far as possible
from the cell-phone.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Removing the unit
Removing Procedure
1) Remove the trim plate by
referring to step 1 in “Removing
the trim plate”.
2) Insert the two extraction key
(accessory4) deeply into the slots
on each side, as shown.
Removing the trim plate
1) Engage the catch pins on the
extraction key (accessory4) and
remove the two locks on the
lower level.
Lower the trim plate (accessory9)
and pull it forward as shown in
the figure.
4
9
4
3) Lower the extraction key toward
the bottom, and pull out the unit
halfway while pressing towards
the inside.
Catch
Lock
NOTE
• The trim plate can be removed from the
top side in the same manner.
2) When the lower level is removed,
remove the upper two locations.
NOTE
• Be careful to avoid injury from the catch
pins on the extraction key.
4) Pull the unit all the way out with
your hands, being careful not to
drop it.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Connection
System connection
Accessory =
Accessory =
Accessory 0
Accessory 0
1
2
2
AV Audio output
AV Audio output
Accessory 3
Connect to the vehicle’s
parking brake detection
switch harness.
Audio/Visual
Input
Accessory 2
Visual Output
Light Green (Parking sensor wire)
PRK SW
Rear view
camera input
For best safety, be sure to connect the
parking sensor.
Front view
camera input
Purple/White (Reverse sensor wire)
Connect to vehicle’s
reverse lamp harness
when using the
optional rear view
camera.
REVERSE
Green/Red
To CMOS-310/CMOS-300
(Optional Accessory)
camera control terminal
Blue/Red
(DNX890HD/ DNX7700BT only)
Green/White
To Relay Box
RELAY
FM/AM antenna input
Accessory 0: GPS Antenna
Accessory =:
Bluetooth Microphone
2
Rear Audio Preout
Front Audio Preout
Subwoofer Preout
Rear View Camera Input
AV Video Output
1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
Connecting wires to terminals
Fuse (10A)
Fuse (10A)
Ignition key
switch
Accessory 1
ACC
Red (Ignition wire)
White/Black
White
Yellow (Battery wire)
To front left
speaker
+
+
Car fuse box
(Main fuse)
Car fuse box
Black (Ground wire)
(To car chassis)
Gray/Black
Gray
A
To front right
speaker
A
Battery
Light Blue/Yellow
(Steering remote control wire)
To steering remote
Green/Black
Green
STEERING WHEEL
REMOTE CONT
REMOTE INPUT
To use the steering wheel remote
control feature, you need an exclusive
remote adapter (not supplied) matched
to your car.
To rear left
speaker
+
+
Orange/White
(Dimmer control wire)
To car light control switch
ILLUMI
Purple/Black
Purple
To rear right
speaker
Brown (Mute control wire)
Connect to the terminal that is
grounded when either the telephone
rings or during conversation.
To use the Mute feature, you need to
hook up this wire to your telephone by
using a commercial telephone accessory.
MUTE
Speaker impedance: 4-8 Ω
Blue
(Antenna control wire)
Depending on what antenna you are
using, connect either to the control
terminal of the motor antenna, or to the
power terminal for the booster amplifier
of the film-type antenna.
ANT CONT
(Max. 300mA, 12V)
Blue/White
(Power control wire)
When using the optional power amplifier,
connect to its power control terminal.
P. CONT
If no connections are made,
do not let the cable come out from the tab.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
Optional accessory connection
SiriusXM Connect Vehicle
Tuner connector
(DNX890HD/ DNX690HD/
DNX570HD/ DNX5080EX only)
iDatalink connector
(DNX890HD/ DNX690HD/
DNX570HD/ DNX5080EX only)
USB device
(commercially
available)
USB terminal‡
(0.8 m)
USB
1
2
3
iPod terminal†
(0.8 m)
iPod terminal†
(0.8 m)
iPod
(commercially
available)
USB terminal
(0.8m)
USB device
(commercially
available)
†iPod maximum power supply current
: DC 5 V
1 A
‡USB maximum power supply current
: DC 5 V
500 mA
KCA-iP202
(Optional Accessory)
Audio Output (1.8m)
iPod/ AV-IN2 (CA-C3AV;
Optional Accessory) input
1
2
3
NOTE
AV-IN (CA-C3AV; Optional
Accessory) input
• When iPod AV Interface Use is set to“AV-
IN2”on the AV-IN SETUP screen, iPod can be
connected only to the USB terminal using
the KCA-iP102 (Optional Accessory).
iPod/ AV-IN2 (CA-C3AV;
Optional Accessory) input
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software
tools to convert your files into DivX videos.
About this Unit
■ Copyrights
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified®
device must be registered in order to play purchased
DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your
device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by JVC KENWOOD Corporation is under license.
Other trademarks and trade names are those of their
respective owners.
• DivX®, DivX Certified® and associated logos are
trademarks of Rovi Corporation or its subsidiaries and
are used under license.
• The“AAC”logo is a trademark of Dolby Laboratories.
• “Made for iPod”and“Made for iPhone”mean that an
electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and has been
certified by the developer to meet Apple performance
standards. Apple is not responsible for the operation of
this device or its compliance with safety and regulatory
standards. Please note that the use of this accessory
with iPod or iPhone may affect wireless performance.
• Requirements Pandora® internet radio:
Requirements for listening to the Pandora® internet
radio are as follows:
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running under
iOS3 or later.
• iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
• Search for“Pandora”in the Apple iTunes App Store
to find and install the most current version of the
Pandora® application on your device.
• iTunes is a trademark of Apple Inc.
• Sirius, XM and all related marks and logos are
trademarks of Sirius XM Radio Inc. All rights reserved.
• iPhone/ iPod touch connected to this unit with a KCA-
iP202 or KCA-iP102.
• HD Radio Technology manufactured under license from
iBiquity Digital Corporation. U.S. and Foreign Patents.
HD Radio™ and the HD, HD Radio, and“Arc”logos are
proprietary trademarks of iBiquity Digital Corp.
Android™
• Visit the Google play and search for Pandora to install.
• Bluetooth must be built in and the following profiles
must be supported.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
•
is a trademark of DVD Format/Logo Licensing
Corporation registered in the U.S., Japan and other
countries.
BlackBerry®
• This item incorporates copy protection technology
that is protected by U.S. patents and other intellectual
property rights of Rovi Corporation. Reverse
download the Pandora application.
• Bluetooth must be built in and the following profiles
must be supported.
engineering and disassembly are prohibited.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
NOTE
• Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS, the
Symbol, & DTS and the Symbol together are registered
trademarks & DTS 2.0 Channel is a trademark of DTS,
Inc. Product includes software. © DTS, Inc. All Rights
Reserved.
• The Pandora service is available only in the U.S.
• Pandora® is available only in the U.S, Canada, Australia
and New Zealand.
• Because Pandora® internet radio is a third-party
service, the specifications are subject to change
wihtout prior notice. Accordingly, compatibility
may be impaired or some or all of the services may
become unavailable.
• Android is a trademark of Google Inc.
• BlackBerry®, RIM®, Research In Motion® and related
trademarks, names and logos are the property of
Research In Motion Limited and are registered and/or
used in the U.S. and countries around the world. Used
under license from Research In Motion Limited.
• Some Pandora® functionality cannot be operated
from this unit.
• For issues using the Pandora® application, please
contact Pandora at [email protected]
• PANDORA, the PANDORA logo, and the Pandora trade
dress are trademarks or registered trademarks of
Pandora Media, Inc., used with permission.
• Adobe, Acrobat and Reader are either registered
trademarks or trademarks of Adobe Systems
Incorporated in the United States and/or other
countries.
• ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, LLC, a subsidiary of Rovi Corporation.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DNX890HD/DNX7700BT/DNX690HD/DNX570HD/DNX5080EX/DNX5700BT
• Requirements Aha™:
DNX890HD/ DNX690HD/ DNX570HD/
Requirements for listening to Aha™ are as follows:
DNX5080EX:
• Download the Aha application from the iTunes App
Store or Android Marketplace.
■ FCC WARNING
This equipment may generate or use radio
frequency energy. Changes or modifications to this
equipment may cause harmful interference unless
the modifications are expressly approved in the
instruction manual. The user could lose the authority to
operate this equipment if an unauthorized change or
modification is made.
• In the application on your device, log in and create a
free account with Aha.
• Internet connection by 3G, EDGE, or WiFi.
iPhone or iPod touch
• Use an Apple iPhone or iPod touch running iOS4
or later.
NOTE
• Search for“Aha”in the Apple iTunes App Store to
find and install the most current version of the Aha™
application on your device.
• iPhone/ iPod touch connected to this unit with a
KCA-iP202 or KCA-iP102.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation.
Android™
This equipment may cause harmful interference to
radio communications, if it is not installed and used in
accordance with the instructions. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can
be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
• Use Android OS 2.2 or later.
• Download the Aha™ application to your smartphone
from the Android Marketplace.
• Bluetooth must be built in and the following profiles
must be supported.
- SPP (Serial Port Profile)
- A2DP (Advanced Audio Distribution Profile)
Note
• Because Aha™ is a third-party service, the
specifications are subject to change without
prior notice. Accordingly, compatibility may be
impaired or some or all of the services may become
unavailable.
• Some Aha™ functionality cannot be operated from
this unit.
• aha, the Aha logo, and the Aha trade dress are
trademarks or registered trademarks of HARMAN
International Industries, used with permission.
2CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
In compliance with Federal Regulations, following
are reproductions of labels on, or inside the product
relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS
RULES 21 CFR SUBCHAPTER J IN EFFECT AT
DATE OF MANUFACTURE.
Location: Top plate
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start Guide
DNX890HD/ DNX690HD/ DNX570HD/
DNX5080EX:
■ IC (Industry Canada) Notice
This device complies with Industry Canada licence-
exempt RSS standard(s).
Operation is subject to the following two conditions:
(1)This device may not cause interference, and
(2) this device must accept any interference, including
interference that may cause undesired operation of
the device.
The term“IC: ”before the certification/ registration
number only signifies that the Industry Canada
technical specification were met.
2CAUTION
This equipment complies with FCC/IC radiation
exposure limits set forth for an uncontrolled
environment and meets the FCC radio frequency (RF)
Exposure Guidelines in Supplement C to OET65 and
RSS-102 of the IC radio frequency (RF) Exposure rules.
This equipment has very low levels of RF energy that
it deemed to comply without maximum permissive
exposure evaluation (MPE). But it is desirable that it
should be installed and operated keeping the radiator
at least 20cm or more away from person’s body
(excluding extremities: hands, wrists, feet and ankles).
Under Industry Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
DNX890HD/ DNX690HD/ DNX570HD/
DNX5080EX:
• Contains Transmitter Module
FCC ID : XQN-BTR60X
• Contains Transmitter Module
IC: 9688A-BTR601
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|