Kenwood Food Processor FP215 User Manual

FP215  
Download from Www.Somanuals.com. All Manuals Search And Download.  
before using your Kenwood appliance  
Read these instructions carefully and retain for future reference.  
Remove all packaging and any labels.  
Important – UK only  
G
G
G
G
The wires in the cord are coloured as follows:  
Blue = Neutral,  
Brown = Live.  
The appliance must be protected by a 13A approved (BS1362)  
fuse.  
safety  
G
The blades and discs are very sharp, handle with care. Always  
hold the knife blade by the finger grip at the top,  
away from the cutting edge, both when handling and  
cleaning.  
Always remove the knife blade before pouring contents from the  
bowl.  
Keep hands and utensils out of the processor bowl and liquidiser  
jug whilst connected to the power supply.  
Switch off and unplug:  
Note:  
G
For non-rewireable plugs the fuse cover MUST be refitted when  
replacing the fuse. If the fuse cover is lost then the plug must not  
be used until a replacement can be obtained. The correct fuse  
cover is identified by colour and a replacement may be obtained  
from your Kenwood Authorised Repairer (see Service).  
If a non-rewireable plug is cut off it must be DESTROYED  
IMMEDIATELY. An electric shock hazard may arise if an  
unwanted non-rewireable pug is inadvertently inserted into a 13A  
socket outlet.  
G
G
G
G
G
G
before fitting or removing parts  
G
after use  
G
before cleaning  
G
G
This appliance conforms to EC directive 2004/108/EC on  
Electromagnetic Compatibility and EC regulation no. 1935/2004  
of 27/10/2004 on materials intended for contact with food.  
Never use your fingers to push food down the feed tube. Always  
use the pusher/s supplied.  
Before removing the lid from the bowl or liquidiser from the  
power unit:-  
before using for the first time  
G
switch off;  
1 Remove all packaging including the plastic blade covers from the  
knife blade. Take care the blades are very sharp. These  
covers should be discarded as they are to protect the blade  
during manufacture and transit only.  
2 Wash the parts see ‘cleaning’  
3 Push excess cord into the back of the machine.  
G
wait until the attachment/blades have completely stopped;  
G
Be careful not to unscrew the liquidiser jug from the blade  
unit.  
G
G
G
Allow all liquids to cool to room temperature before placing them  
in the liquidiser.  
Do not use the lid to operate the processor, always use the on/off  
speed control.  
This machine will be damaged and may cause injury  
if the interlock mechanism is subjected to excessive  
force.  
key  
processor  
pusher  
feed tube  
lid  
bowl  
detachable drive shaft  
speed + pulse control  
power unit  
safety interlock  
cord storage  
G
G
G
Never use an unauthorised attachment.  
Never leave the machine on unattended.  
Never use a damaged machine. Get it checked or repaired: see  
‘service’.  
Never let the power unit, cord or plug get wet.  
Don’t let excess cord hang over the edge of a table or worktop  
or touch hot surfaces.  
This appliance is not intended for use by persons (including  
children) with reduced physical, sensory or mental capabilities, or  
lack of experience and knowledge, unless they have been given  
supervision or instruction concerning use of the appliance by a  
person responsible for their safety.  
Children should be supervised to ensure that they do not play  
with the appliance.  
Only use the appliance for its intended domestic use. Kenwood  
will not accept any liability if the appliance is subject to improper  
use, or failure to comply with these instructions.  
G
G
G
liquidiser  
blade unit  
sealing ring  
jug  
filler cap  
lid  
G
G
G
G
Misuse of your processor/liquidiser can result in injury.  
attachments  
before plugging in  
Make sure your electricity supply is the same as the one shown  
on the underside of your appliance.  
knife blade  
emulsifying tool / whisk  
thick slicing/coarse shredding disc  
spatula  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
to use your food processor  
choosing a speed for all functions  
1 Fit the detachable shaft onto the power unit .  
2 Then fit the bowl. Place the handle towards the back and turn  
clockwise until it locks .  
tool/attachment function  
speed  
knife blade  
Cake making  
1 – 2  
2
Rubbing fat into flour  
Adding water to combine  
pastry ingredients  
Chopping/pureeing/pâtés  
Yeasted dough mixes  
Thick soup mixes (500mls liquid  
to 500g dry ingredients)  
Thinner soup mixes/ milk  
(max 600mls)  
3 Fit an attachment over the drive shaft.  
G
Always fit the bowl and attachment onto the machine before  
1 – 2  
adding ingredients.  
4 Fit the lid - ensuring the top of the drive shaft locates into the  
centre of the lid.  
2
2
1
G
Do not use the lid to operate the processor, always  
use the on/off speed control.  
5 Switch on and select a speed.  
1 – 2  
2
1 - 2  
G
The processor won’t work if the bowl and lid are  
emulsifying tool  
/ whisk  
discs - slicing/  
shredding  
Egg whites  
fitted incorrectly.  
Cream (max 250mls)  
Firm food items such as carrots,  
hard cheeses  
G
Use the pulse control for short bursts. The pulse will operate as  
long as the control is held in position.  
6 Reverse the above procedure to remove the lid, attachments and  
bowl.  
2
Softer items such as  
cucumbers, tomatoes  
All processing  
1
2
G
Always switch off before removing the lid.  
liquidiser  
important  
G
Your processor is not suitable for crushing or grinding coffee  
beans, or converting granulated sugar to caster sugar.  
When adding almond essence or flavouring to mixtures avoid  
contact with the plastic as this may result in permanent marking.  
maximum capacities  
Shortcrust pastry Flour wt  
Yeast dough Flour wt  
One Stage Cake Total wt  
Chopping lean meat Total wt  
Thick soup mixes  
Thinner soup mix/milk  
Whisk egg white  
Liquidiser  
G
G
G
G
G
250g/9oz  
340g/12oz  
1Kg/2lb 4oz  
400g/14oz  
1 litre  
600mls  
6
1.2 litres  
G
to use your liquidiser  
1 Fit the sealing ring into the blade unit - ensuring the seal is  
located correctly. Leaking will occur if the seal is  
damaged or not fitted correctly.  
G
G
2 Hold the underside of the blade unit and insert the blades into  
the jug - turn clockwise to lock.  
3 Put your ingredients into the jug.  
4 Fit the lid onto the jug and turn clockwise to lock . Fit the filler  
cap.  
5 Place the liquidiser onto the power unit and turn to lock .  
6 Select a speed or use the pulse control.  
using the attachments  
see chart for speed of each attachment.  
knife blade  
The knife blade is the most versatile of all the attachments. The  
length of the processing time will determine the texture achieved.  
For coarser textures use the pulse control.  
hints  
G
Use the knife blade for cake and pastry making, chopping raw  
and cooked meat, vegetables, nuts, pate, dips, pureeing soups  
and to also make crumbs from biscuits and bread.  
When making mayonnaise, put all the ingredients, except the oil  
into the liquidiser. Then with the machine running, pour the oil into  
the filler cap and let it run through.  
G
Thick mixtures, eg pates and dips, may need scraping down. If  
its difficult to process, add more liquid.  
When crushing ice use the pulse in short bursts.  
It can also be used for yeasted dough mixes.  
hints  
knife blade  
G
important  
G
G
G
G
G
Cut food such as meat, bread, vegetables into cubes  
approximately 2cm/3/4in before processing.  
Biscuits should be broken into pieces and added down the feed  
tube whilst the machine is running.  
When making pastry use fat straight from the fridge cut into  
2cm/3/4in.cubes.  
G
Allow all liquids to cool to room temperature before  
placing them in the liquidiser.  
To ensure the long life of your liquidiser, never run it for longer  
than 60 seconds. Switch off as soon as you’ve got the right  
consistency.  
Don’t process spices - they may damage the plastic.  
The machine won’t work if the liquidiser is fitted incorrectly.  
Don’t put dry ingredients into the liquidiser before switching on. If  
necessary, cut them into pieces; remove the filler cap; then with  
the machine running, drop them through one by one.  
G
G
Take care not to over-process.  
dough  
G
G
Place the dry ingredients in the bowl and add the liquid down the  
feed tube whilst the machine is running. Process until a smooth  
elastic ball of dough is formed this will take 60 secs.  
Re-knead by hand only. Re-kneading in the bowl is not  
recommended as it may cause the processor to become  
unstable.  
G
Don’t use the liquidiser as a storage container. Keep it empty  
before and after use.  
Never blend more than 1.2 litres - less for frothy liquids like  
milkshakes.  
G
G
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
bowl/lid and attachments  
Wash by hand, then dry.  
Alternatively they can be washed on the top rack of your  
dishwasher. A short low temperature program is recommended.  
emulsifying tool / whisk  
G
G
Use for egg whites and cream only.  
hints  
G
Best results are obtained when the eggs are at room  
temperature.  
service & customer care  
G
Ensure the bowl and whisk are clean and free from grease before  
whisking.  
G
If the cord is damaged it must, for safety reasons, be replaced  
by Kenwood or an authorised Kenwood repairer.  
slicing/shredding discs  
UK  
To use the discs.  
If you need help with:  
G
reversible slicing/shredding discs - thick  
Use the shredding side for cheese, carrots, potatoes and foods  
of a similar texture.  
Use the slicing side for cheese, carrots, potatoes, cabbage,  
cucumber, courgette, beetroot and onions.  
Using your appliance  
Servicing or repairs (in or out of guarantee)  
G
call Kenwood on 023 92392333 and ask for customer care.  
Have your model number ready - its on the underside of  
the processor.  
G
spares and attachments  
safety  
call 0870 2413653.  
G
other countries  
Never remove the lid until the cutting disc has  
Contact the shop where you brought the food processor.  
completely stopped.  
G
Handle the cutting discs with care - they are  
G
Designed and engineered by Kenwood in the UK.  
extremely sharp  
G
Made in China.  
to use the cutting discs  
1 Fit the drive shaft and bowl onto the power unit.  
2 Holding by the centre grip, place the disc onto the drive shaft with  
the appropriate side uppermost.  
3 Fit the lid.  
4 Put the food in the feed tube.  
5 Switch on and push down evenly with the pusher - never put  
your fingers in the feed tube.  
IMPORTANT INFORMATION FOR CORRECT DISPOSAL  
OF THE PRODUCT IN ACCORDANCE WITH EC  
DIRECTIVE 2002/96/EC.  
hints  
At the end of its working life, the product must not be disposed of as  
urban waste.  
G
Use fresh ingredients  
Don’t cut food too small. Fill the width of the feed tube fairly full.  
G
It must be taken to a special local authority differentiated waste  
collection centre or to a dealer providing this service.  
Disposing of a household appliance separately avoids possible  
negative consequences for the environment and health deriving  
from inappropriate disposal and enables the constituent materials  
to be recovered to obtain significant savings in energy and  
resources. As a reminder of the need to dispose of household  
appliances separately, the product is marked with a crossed-out  
wheeled dustbin.  
This prevents the food from slipping sideways during processing.  
Food placed upright comes out shorter than food placed  
horizontal.  
There will always be a small amount of waste on the disc or in  
the bowl after processing.  
G
G
care & cleaning  
Always switch off and unplug before cleaning.  
G
G
Handle the blades and cutting discs with care - they are  
extremely sharp.  
G
Some foods may discolour the plastic. This is perfectly normal  
and won’t harm the plastic or affect the flavour of your food. Rub  
with a cloth dipped in vegetable oil to remove the discolouration.  
guarantee UK only  
If your food processor goes wrong within one year from the date  
you bought it, we will repair it (or replace it if necessary) free of  
charge provided:  
you have not misused, neglected, or damaged it;  
it has not been modified (unless by Kenwood);  
power unit  
G
G
Wipe with a damp cloth, then dry. Ensure that the interlock area  
is clear of food debris.  
Store excess cord in the storage area at the back of the machine .  
G
G
it is not second hand;  
it has not been used commercially;  
G
G
G
liquidiser  
you have not fitted a plug incorrectly; and  
G
1 Empty the jug before unscrewing it from the blade unit.  
2 Wash the jug by hand.  
you supply your receipt to show when you bought it.  
This guarantee does not affect your statutory rights.  
3 Remove and wash the sealing ring.  
4 Don’t touch the sharp blades - brush them clean using hot  
soapy water, then rinse thoroughly under the tap. Don’t  
immerse the blade unit in water.  
5 Leave to dry upside down.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Head Office Address:  
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK  
Designed and engineered by Kenwood in the UK  
Download from Www.SomanMuaalsd.ceomin. ACllhMinaanuals Search And Download.  
19284/2  

Indesit Washer Accessories IWE 8128 User Manual
Indesit Washer Dryer WDG 1095 WG User Manual
Ingersoll Rand Heat Pump LP2009 2 B User Manual
Ingersoll Rand Water Pump PH15F XXX XXX X User Manual
John Deere Compact Excavator 240D LC User Manual
John Lewis Refrigerator JLFSBK2001 User Manual
JVC Stereo System CA NXG9 User Manual
Knoll Systems Projector LED1081 User Manual
Kompernass DVD Player KH6525 User Manual
Kramer Electronics Marine Radio VP 100A User Manual