Kenwood DVD Player DV 4070 User Manual
COMPACT  
COMPACT  
DIGITAL AUDIO  
TEXT  
DIGITAL VIDEO  
DV-4900 DV-4070  
DVF-R9030  
DVF-R7030  
This instruction manual is used to  
describe multiple models listed above.  
Model availability and features  
(functions) may differ depending on the  
country and sales area.  
Multiple DVD VCD CD  
B60-4707-00 00 CS (T,K,M,X) AP @0004  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Compatible with DVD AUDIO, one of the latest  
digital audio formats  
Multi-audio function: With DVD discs marked  
Compatibility with Wide Range of Digital  
Surround Software  
8
with the  
icon, the desired language can be  
played back by selecting it from up to 8  
languages. (The number of available languages  
is variable depending on the discs.)  
The DVD AUDIO reproduces 2-channel, 192  
kHz, 24-bit sampled digital audio or 6-channel,  
96 kHz, 24-bit sampled audio. This innovative  
technology has made possible audio  
reproduction in unprecedented high quality.  
Picture information and character information  
(ALBUM TEXT) are also provided.  
The unit incorporates Dolby Digital decoder,  
DTS decoder, MPEG multi-channel decoder and  
Packed PCM decoder so that the users can enjoy  
the sound of real cinemas. The unit can also be  
connected to the user's existing TV set  
Multi-subtitle function: With DVD discs  
32  
marked with the  
icon, the subtitle language  
can be selected from up to 32 languages. (The  
number of subtitle languages is variable  
depending on the discs.)  
6-Channel Output Terminals  
These output terminals can be connected to an  
amplifier with 6-channel input compatibility to  
enjoy high-bit, high-sampling rate multi-channel  
sound.  
Versatile DVD VIDEO Functions  
Angle function: With DVD discs marked with  
The DVD VIDEO provides horizontal resolution  
of 430 lines, which exceeds that of DVD or S  
VHS video (400 lines) or laserdisc (430 lines).  
The difference is obvious when the screen size is  
increased.  
the  
icon, a single object can be viewed in  
9
up to 9 angles by switching. (The number of  
available angles is variable depending on the  
discs.)  
5-Disc Carousel Disc Changer  
The disc tray can accommodate up to 5 discs and  
the disc can be changed while another disc is  
being played.  
Accessories  
Joystick remote control  
unit (1)  
Batteries (R6/AA)  
(2)  
S Video cable  
(1)  
Video cable  
Unpacking  
AC plug adapter (1)  
(1)  
Unpack the unit carefully and make sure that all accessories  
are put aside so they will not be lost.  
Examine the unit for any possibility of shipping damage. If  
your unit is damaged or fails to operate, notify your dealer  
immediately. If your unit was shipped to you directly, notify  
the shipping company without delay. Only the consignee (the  
person or company receiving the unit) can file a claim against  
the carrier for shipping damage.  
Audio cables  
(3)  
Optical fiber cable  
(1)  
Instructoin manual/  
separate User's Guide (1)  
Use to adapt the plug  
on the power cord to  
the shape of the wall  
outlet. (Accessory only  
for regions where use is  
necessary.)  
We recommend that you retain the original carton and  
packing materials for use should you transport or ship the  
unit in the future.  
M
u
l
t
i
p
l
e
D
V
D
V
C
D
C
D
Keep this manual handy for future reference.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents Caution : Read the pages marked  
Before applying power ................... 2  
carefully to ensure safe operation.  
"VISUAL" Setting .......................................... 34  
"Player Menu Language" Setting ........................... 34  
"Disc Menu Language" Setting .............................. 34  
"Audio Language" Setting...................................... 35  
"Subtitle Language" Setting ................................... 36  
"Still Mode" Setting ............................................... 36  
"FL Mode" Setting .................................................. 37  
Chapter 2: Various Setups .................. 14  
Preparation of Remote Control Unit ........... 14  
Installing the batteries : ......................................... 14  
Remote control range :........................................... 14  
Turning Power on ........................................ 14  
Standby mode:........................................................ 14  
Control Buttons Used in Setups .................. 15  
Safety precautions................................... 2  
Features .......................................................... 3  
Accessories ..................................................... 3  
Systems and Types of Playable Discs ............. 5  
Unplayable Discs ............................................ 5  
Icons Inscribed on DVD Discs ....................... 6  
"NTSC =PAL" Setting (Except for the U.S.A. and  
Canada)................................................................... 38  
Basic Operations in Setup Screen ................ 15  
Region Codes of This Player (DVD VIDEO disc  
only) ............................................................... 6  
When "MAIN" is selected in "SET UP MENU": ... 16  
When "SOUND" is selected in "SET UP MENU": 16  
When "VISUAL" is selected in "SET UP MENU": 17  
"SCART Output Select" Setting (For Europe and U.K.)  
............................................................................. 38  
Disc Language Code Table..................................... 40  
Region codes of the DVD VIDEO discs that can be  
played with this player ..............................................7  
Region codes in the world ....................................... 7  
Video Formats ................................................ 8  
Checking the Video Format ..................................... 8  
"MAIN" Setting ............................................. 18  
"Rating" Setting ...................................................... 18  
"TV Aspect" Setting ................................................ 20  
"TV Mode" Setting................................................. 20  
"TV Monitor Type" Setting .................................... 21  
"DVD VIDEO Mode" Setting ................................. 22  
"OSD Position" Setting.......................................... 22  
"On Screen Message" Setting ................................ 23  
"IPB Display" Setting ............................................. 24  
Chapter 3: Other Information ............ 41  
To Be Noted .................................................. 41  
Glossary........................................................ 43  
Index ............................................................ 45  
Specifications ............................................... 46  
Chapter 1: Connection of Equipment... 9  
Connection with a TV or Stereo System....... 10  
To Connect a TV ...................................................... 11  
To Connect a Stereo System ................................... 11  
To Set Up of the Player ........................................... 11  
"SOUND" Setting.......................................... 26  
"Digital Audio PCM Down Conversion"  
Setting.................................................................. 26  
Connection with an AV Amplifier................. 12  
To Connect an AV Amplifier.................................. 13  
To Setup of the Player ............................................ 13  
"Digital Audio Dolby Digital" Setting .................. 26  
"Digital Audio DTS" Setting .................................. 27  
"Digital Audio MPEG" Setting .............................. 28  
"Speaker Setting" .................................................... 28  
"Audio During Search" Setting ............................. 32  
"Dynamic Range Control" Setting ........................ 32  
"Audio Filter" Setting ............................................ 33  
®
As an ENERGY STAR Partner,  
Kenwood Corporation has determined  
that this products meets the ENERGY  
®
STAR guidelines for energy efficiency.  
This product can save energy. Saving energy reduces  
air pollution and lowers utility bills.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Systems and Types of Playable Discs  
Playable Disc  
DVD AUDIO  
DVD VIDEO  
CD  
VCD  
COMPACT  
COMPACT  
COMPACT  
Logo mark  
DIGITAL AUDIO  
TEXT  
DIGITAL AUDIO  
DIGITAL VIDEO  
Disc size  
12 cm or 8 cm  
12 cm or 8 cm  
12 cm or 8 cm  
12 cm or 8 cm  
Played side(s)  
Sampling rate  
1 or 2  
1 or 2  
1 side only  
1 side only  
Max. 192 kHz/24 bit (2CH)  
Max. 96 kHz/24 bit (2CH)  
44.1 kHz/ 16 bit (2CH)  
44.1 kHz/ 16 bit (2CH)  
Unplayable Discs  
Never attempt to play a Photo CD, CD-R or CD-  
RW disc on this unit. Otherwise, the disc data may  
be destroyed.  
A DVD VIDEO disc with a region code which  
does not match this unit or without a region  
code. For details, see "Region Codes of This  
Player".  
6
Other discs which cannot be played on this unit:  
When the video format of a disc differs from that  
of the TV in use, the disc cannot be played  
normally. For details, see "Video Formats".  
8
SACD, DVD-ROM, DVD-R/RAM, DVD-RW, CD-  
ROM, VSD, CDV*, CD-G*, CD-EG*, CD-  
EXTRA*, etc.  
* Only the audio part can be reproduced.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Icons Inscribed on DVD Discs  
Region Codes of This Player  
(DVD VIDEO disc only)  
Islands, Faeroe Islands, Gibraltar, Greenland, Isle  
of Man, Svalbard and Jan Mayen Islands  
ALL  
Indicates the playable region code.  
3
A region code defined for each country or area is  
assigned for each DVD VIDEO player, so it cannot  
play a DVD VIDEO disc if its region code do not  
match that of this unit. Also, a disc which does not  
contain any region code may sometimes be unable  
to be played on the player.  
Region Code of Player :  
Usable Country or Area : Brunei Darussalam,  
Cambodia, Indonesia, Korea, Laos, Malaysia,  
Myanmar, Philippines, Singapore, Thailand,  
Viet Nam, East Timor, Hong Kong, Macau,  
Taiwan  
8
Indicates the number of languages in the  
audio. The figure in the icon shows the number (max.  
8 languages).  
When purchasing a DVD VIDEO disc, make sure that  
it has a region code which can be played on your  
player.  
32  
Indicates the number of available subtitle  
4
Region Code of Player :  
languages. The figure in the icon shows the number  
(max. 32 subtitle languages).  
Usable Country or Area : Antigua and  
Barbuda, Argentina, Australia, Bahamas,  
Barbados, Belize, Bolivia, Brazil, Chile,  
Colombia, Costa Rica, Cuba, Dominica,  
Dominican Republic, Ecuador, El Salvador,  
Fiji, Grenada, Guatemala, Guyana, Haiti,  
Honduras, Jamaica, Kiribati, Marshall  
Islands, Mexico, Micronesia, Nauru, New  
Zealand, Nicaragua, Palau, Panama, Papua  
New Guinea, Paraguay, Peru, Saint  
Christopher and Nevis, Saint Lucia, Saint  
Vincent and the Grenadines, Samoa,  
Solomon Islands, Suriname, Tonga, Trinidad  
and Tobago, Tuvalu, Uruguay, Vanuatu,  
Venezuela, Anguilla, British Virgin Islands,  
Cayman Islands, Christmas Island, Cocos  
Islands, Cook Islands, Falkland Islands,  
French Guiana, French Polynesia,  
Guadeloupe, Guam, Martinique, Montserrat,  
Netherlands Antilles, New Caledonia, Niue,  
Norfolk Island, Northern Mariana Islands,  
Pitcairn, Tokelau, Turks and Caicos Islands,  
Wallis and Futuna Islands  
1
Region Code of Player:  
9
Indicates the number of viewing angles which  
can be viewed with the angle function. The figure in  
the icon shows the number (max. 9 angles).  
Usable Country or Area : Canada, United States,  
American Samoa, Bermuda, Johnston Island,  
Midway Islands, Puerto Rico, St. Pierre and  
Miquelon, United States Virgin, Wake Island  
16:9 LB  
Indicates the number of available aspect  
ratios. LB stands for Letter Box and PS stands for Pan  
& Scan. (The example shown means that the 16:9 video  
can be converted into letterbox.)  
2
Region Code of Player :  
Usable Country or Area : Albania, Andorra,  
Austria, Bahrain, Belgium, Bosnia and  
Herzegovina, Bulgaria, Croatia, Cyprus, Czech,  
Denmark, Egypt, Finland, France, Germany,  
Greece, Hungary, Iceland, Iran, Iraq, Ireland,  
Israel, Italy, Japan, Jordan, Kuwait, Lebanon,  
Lesotho, Liechtenstein, Luxembourg,  
Macedonia, Malta, Monaco, Netherlands,  
Norway, Oman, Poland, Portugal, Qatar,  
Romania, San Marino, Saudi Arabia, Slovakia,  
Slovenia, South Africa, Spain, Swaziland,  
Sweden, Switzerland, Syrian Arab Republic,  
Turkey, United Arab Emirates, United Kingdom,  
Vatican City State, Yemen, Yugoslavia, Channel  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Region codes in the world  
5
Region Code of Player :  
The DVD players are given a region code according to the country or area it is marketed, as shown in the following  
map.  
Usable Country or Area : Afghanistan, Algeria,  
Angola, Armenia, Azerbaijan, Bangladesh,  
Belarus, Benin, Bhutan, Botswana, Burkina Faso,  
Burundi, Cameroon, CapeVerde, Central Africa,  
Chad, Comoros, Congo, Cote d'Ivoire, Djibouti,  
Equatorial Guinea, Eritrea, Estonia, Ethiopia,  
Gabon, Gambia, Georgia, Ghana, Guinea,  
Guinea-Bissau, India, Kazakhstan, Kenya, Kyrgyz  
Republic, Latvia, Liberia, Libya, Lithuania,  
Madagascar, Malawi, Maldives, Mali,  
Mauritania, Mauritius, Moldova, Mongolia,  
Morocco, Mozambique, Namibia, Nepal, Niger,  
Nigeria, North Korea, Pakistan, Russia, Rwanda,  
Sao Tome and Principe, Senegal, Seychelles,  
Sierra Leone, Somalia, Sri Lanka, Sudan,  
Tadzhikistan, Tanzania, Togo, Tunisia,  
Turkmenistan, Uganda, Ukraine, Uzbekistan,  
Zaire, Zambia, Zimbabwe, British Indian  
Territory, Jammu and Kashmir, Mayotte,  
Reunion, St. Helena ex. dep., Western Sahara  
1
5
2
1
2
1
4
6
Region Code of Player :  
5
2
Usable Country or Area : China  
4
Region codes of the DVD VIDEO discs  
that can be played with this player  
This player can play back a DVD VIDEO disc which  
carries the corresponding code to the region code of  
the player shown in the table above, a marking  
containing the region code of the player or the “ALL”  
marking shown below. Even when a DVD VIDEO disc  
does not carry any indication of the region code, it  
may sometimes unable to be played on this player due  
to certain restrictions.  
ALL  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Formats  
The TV picture display and disc signal systems can be  
divided roughly into two TV formats (NTSC and PAL).  
They are variable depending on countries and areas.  
Checking the Video Format  
Check the video format of the VCD and DVD discs to  
be played on the player as described below.  
When the video formats are different : Try playing  
the disc. If the video formats of the disc and TV do not  
match, the played video may be black and white or be-  
come as shown below.  
This unit reproduces NTSC discs in NTSC format and  
PAL discs in PAL format. If the video formats of the  
disc and TV do not match, the disc cannot be  
reproduced correctly. It is therefore required to select  
the disc according to the TV set in use (country and  
area).  
1. Check if the video formats of the TV to be used  
and disc to be played match each other.  
For details, refer to the instructions provided with  
Top and bottom edges are not  
displayed.  
the TV and disc.  
2. When the TV is switchable between NTSC and  
PAL, set the TV format according to the disc  
format.  
TV formats in major countries  
NTSC : Japan, Taiwan, Korea, USA, Canada, Mexico,  
Philippines, Chile, etc.  
Top and bottom areas are  
dark.  
TV Format  
NTSC only *  
PAL only  
Playable Disc Format  
NTSC*  
PAL : China, U.K., Germany, Australia, New  
Zealand, Kuwait, Singapore, etc.  
PAL  
NTSC/PAL  
switchable  
Picture turbulence due to sync  
unmatching.  
NTSC/PAL  
Correct video cannot be reproduced if the video  
formats of the TV and disc do not match.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connection of Equipment  
This manual describes the standard, most typical  
connections of the player. When an associated system  
component is connected, also refer to their instruction  
manuals.  
Before Start  
Do not install the player in a place where the remote  
control sensor is subjected to direct sunlight or the  
light of a fluorescent lamp base on high-frequency  
lighting (inverter system, etc.). Otherwise, the control  
range of the joystick remote will be reduced.  
Malfunction of Microcomputer  
In case the microcomputer malfunctions, making  
operations impossible or showing wrong messages on  
the display even if you connected everything properly.  
When the microcomputer malfunctions, perform the  
following procedure to reset the microcomputer and  
return it to the normal condition.  
For details on the connection of the following  
components, see the indicated reference pages.  
Do not insert the power cord plugs of the player and  
the connected components until all of the components  
have been connected.  
Connection with a TV or Stereo System  
Connection with an AV Amplifier  
0
@
7
1. While holding  
on the player main unit,  
POWER  
press  
.
Be sure to insert all connection cables securely. If a  
cable is plugged incompletely, lack of video, lack of  
audio or noise may result.  
-
ON  
–
OFF  
2. The display on the main unit shows blinking  
"INIT"(initializing), then shows "INIT OK!" (Ini-  
tialization OK) to indicate that the microcomputer  
Before connecting or disconnecting a connection cord,  
be sure to unplug the power plug from the wall power  
outlet. If a connection cable is connected or  
disconnected while the power plug is left connected,  
malfunction or equipment damage may result.  
is reset.  
POWER  
3. Press  
on the main unit to turn it off, then  
OFF  
-
ON  
–
press it again to turn it on.  
When a DVD AUDIO disc is played, the player can output  
audio signals at very high frequencies. As this may  
sometimes lead to speaker damage due to a high-volume  
sound, do not set "Audio Filter" to "Filter 110 kHz"  
when the speakers in use are not suitable for high-  
The resetting clears the setups stored in the  
microcomputer and returns it to the factory-set  
initial condition. After resetting, you should  
perform the various setups of the player again  
from the beginning.  
frequency reproduction.  
‹
Also, be sure to check the actual sound level when  
increasing or decreasing the volume control setting.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connection of Equipment  
Connection with a TV or Stereo System  
Audio connection: To audio input jacks  
Stereo system  
TV  
Audio cable (provided)  
Video connection: To video input jack  
Video cable (provided)  
Component video connection:  
To color difference (Cr) input jack  
Video cable (optional)  
Audio connection: To audio input jacks  
To color difference (Cb) input jack  
To luminance (Y) input jack  
Video cable (optional)  
Video cable (optional)  
Audio cable (provided)  
S Video connection: To S Video input connector  
S Video cable (provided)  
SCART connection (For U.K. and Europe):  
Connect the TV SCART connector to the TV's input connector.  
Connect the VCR SCART connector to the VCR's input connector.  
CENTER  
1
2
L
1
TV SCART  
TV SCART  
R
COAXIAL OPTICAL  
DIGITAL OUTPUT  
Y
Cb  
Cr  
FRONT SURROUND SUB WOOFER  
VIDEO  
OUTPUT  
MIX LINE  
OUTPUT  
S VIDEO OUTPUT  
COMPONENT VIDEO OUTPUT  
(
)
PCM/BIT STREAM  
6CH. OUTPUT  
VCR SCART  
VCR SCART  
Select the video connection method according to the TV in use. When S-Video cable is connected, the ordinary video connection is not necessary.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connection of Equipment  
Connection with a TV or Stereo System  
Do not insert the power cord plugs of the player and  
the connected components until all of the components  
have been connected.  
When the TV in use is a HDTV or "Hi-Vision"  
To Connect a Stereo System  
TV, connect the component video signals from  
the player only to the DVD-compatible input  
jacks.  
Audio connection: Connect the MIX LINE OUTPUT  
jack of the player to the audio input jacks of the  
connected audio component such as a stereo system  
using the provided audio cables.  
For details on the connection terminals and functions  
of the TV, refer to its instruction manual.  
SCART connection (For Europe and U.K.): If the  
TV or VCR has SCART connectors, connect the  
TV SCART or VCR SCART connector of this unit  
to the TV or VCR using SCART cables.  
The video output from the player should be connected  
directly to the TV. If the video output is connected  
through a VCR, the picture displayed on the TV may  
be disturbed due to the copy protect function.  
To Set Up of the Player  
The audio and video signals can be output using  
a single cable. The signal output from the TV  
SCART connector can be switched between  
Setup of Menu screen: The language to be used in  
the menus of the player can be selected.  
To Connect a TV  
"Player Menu Language" Setting  
›
composite video, S Video and RGB. (The VCR  
SCART connector always outputs composite  
video signals so its output signals cannot be  
selected.)  
Video connection: Connect the VIDEO OUTPUT jack  
of the player to the video input of the TV using the  
provided video cable.  
Setups Related to TV: The following setups can be  
made according to the TV connected to the player.  
S Video connection: If the TV has an S Video input  
connector, connect the S VIDEO OUTPUT con-  
nector of the player to it using the provided S Video  
cable.  
"TV Aspect" Setting  
"TV Mode" Setting  
)
)
¡
When the TV is connected through a VCR using  
SCART connection, the picture displayed on the  
TV may be disturbed due to the copy protect  
function.  
"TV Monitor Type" Setting  
As S Video separates video signal into the  
luminance signal (Y) and color signal (C), it can  
provide sharper pictures than ordinary video  
connection.  
When using only the TV and VCR which are  
both connected with the player using the  
SCART connection, the signal from the VCR  
cannot be sent to the TV if the player is  
switched off. (In this case, set the player to the  
power standby mode.)  
Setup of SCART output signals: The signals output  
from the TV SCART connector of the player can be  
selected.  
Component video connection: If the TV has com-  
ponent video input jacks, connect the Y, Cb and  
Cr COMPONENT VIDEO OUTPUT jacks of the  
player to the corresponding jacks on the TV using  
video cables.  
"SCART Output Select" Setting  
°
Audio connection: Connect the MIX LINE OUTPUT  
jacks of the player to the audio input jacks of the  
TV using the provided audio cables.  
As component video separate video signal into  
the luminance signal (Y) and color difference  
signals (Cb, Cr), it can provide sharper image  
than the S Video connection.  
Depending on the TV or video monitor in use,  
the terminal names may be different from those  
used with the player (Y/Pb/Pr or Y/B-Y/R-Y, etc.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connection of Equipment  
Connection with an AV Amplifier  
AV amp  
6-channel audio connection: To 6-channel audio input jacks  
Audio cable (provided)  
Audio connection: To audio input jacks  
Audio cables (provided)  
Video connection: To video input jack  
Video cable (provided)  
S Video connection: To S Video input connector  
S Video cable  
(provided)  
Digital audio connection:  
To digital audio input connector  
Used when the AV amplifier and TV  
have the component video  
Optical fiber cable (provided)  
connection capability.  
0
Used when the TV or VCR has the SCART connection  
capability.  
0
Used when the AV amp has 6-channel  
inputs.  
CENTER  
1
L
1
2
TV SCART  
R
2
COAXIAL OPTICAL  
DIGITAL OUTPUT  
Y
Cb  
Cr  
FRONT SURROUND SUB WOOFER  
6CH. OUTPUT  
VIDEO  
OUTPUT  
MIX LINE  
OUTPUT  
S VIDEO OUTPUT  
COMPONENT VIDEO OUTPUT  
(
)
PCM/BIT STREAM  
VCR SCART  
Select the video connection method according to the TV in use. When S-Video cable is connected, the ordinary video connection is not necessary.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connection of Equipment  
Connection with an AV Amplifier  
Do not insert the power cord plugs of the player and  
the connected components until all of the components  
have been connected.  
It is also possible to perform digital connection  
using a commercially available coaxial cable and  
the COAXIAL DIGITAL OUTPUT jack. In the  
coaxial digital connection, be sure to use a digital  
audio cable, not an ordinary audio cable.  
Setup for digital audio connection: If the connected  
AV amplifier does not contain any of Dolby Digi-  
tal, DTS and MPEG decoder, be sure to set the  
"Digital Audio" settings after connecting the player  
to it.  
For details on the connection terminals and functions  
of the AV amplifier, refer to its instruction manual.  
For the nonexistent decoders, set the "Digital Audio"  
setting to "PCM". If the player is played without  
changing the initial "Bitstream" setting, extremely  
loud noise will be produced and may damage the  
speakers.  
Video connection: Connect the VIDEO OUTPUT jack  
of the player to the video input jack of the AV am-  
plifier using the provided video cable.  
The video output from the player should be connected  
directly to the AV amplifier. If the video output is  
connected through a VCR, the picture displayed on  
the TV may be disturbed due to the copy protect  
function.  
S Video connection: When the connected TV has an  
S Video connector, connect the S VIDEO OUTPUT  
connector of the player to it using the provided  
S Video cable.  
"Digital Audio PCM Down Conversion" Setting  
§
As S Video separates video signal into the  
luminance signal (Y) and color signal (C), it can  
provide sharper pictures than ordinary video  
connection.  
To Connect an AV amplifier  
"Digital Audio Dolby Digital" Setting  
"Digital Audio DTS" Setting  
§
•
6-Channel audio connection: When the connected  
AV amplifier has 6-channel audio input jacks, con-  
nect the 6CH. OUTPUT jacks of the player to them.  
"Digital Audio MPEG" Setting  
Setup for 6-channel audio connection: When the  
audio is connected using the 6CH. OUTPUT jacks  
of the player, set the player as follows.  
To Set Up of the Player  
When an amplifier which is not compatible with  
6-channel inputs is connected, use the signals  
from the MIX LINE OUTPUT jacks of the player.  
The multi-channel surround audio will be down-  
Setup of Menu screen: The language to be used in  
the menus of the player can be selected.  
"Speaker Setting"  
•
mixed and output.  
e
"Player Menu Language" Setting  
›
Setups Related to TV: The following setups can be  
Audio connection: Connect the MIX LINE OUTPUT  
jacks of the player to the audio input jacks of the  
AV amplifier using the provided audio cables.  
made according to the TV connected to the player.  
Audio output from DVD AUDIO  
"TV Aspect" Setting  
)
)
¡
When the "D.MIX" (down-mix) indicator is not lit,  
the MIX LINE OUTPUT, DIGITAL OUTPUT and  
PHONES output jacks output the front (L/R) channel  
signals instead of the down-mixed 2-channel signals.  
The 6CH. OUTPUT jacks output the same number of  
channels as the original number of channels recorded  
in the DVD AUDIO disc, regardless of the speaker  
setting. When the "P.PCM" indicator is lit, the 6CH.  
OUTPUT jacks output the same number of channels  
as the original number of channels regardless of  
whether the "D.MIX" indicator is lit or not.  
Digital audio connection: Connect the OPTICAL  
DIGITAL OUTPUT connector of the player to the  
digital audio input connector of the AV amplifier.  
"TV Mode" Setting  
"TV Monitor Type" Setting  
Do not bend or bundle the optical fiber cable.  
Be sure to attach the protection caps on the  
optical connectors when they are not used.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
This chapter describes the setup operations of the player according to the connected components. Most of the operations described below can be performed using the  
provided joystick remote control unit. For the operations, also refer to the separate "User's Guide".  
Preparation of Remote Control Turning Power on  
Unit  
STANDBY mode:  
When the power plug of the player is inserted in a wall  
outlet and the POWER button is pressed, the  
"STANDBY" indicator lights up to indicate that the  
power of the player is in standby mode.  
While the "STANDBY" indicator of the unit is lit, a  
small amount of current is flowing into the unit’s  
internal circuitry to back up the memory. This  
condition is referred to as the standby mode of the  
unit. While the unit is in the standby mode, it can be  
turned on from the remote control unit.  
Installing the batteries:  
Open the cover and insert the batteries (R6/AA) by  
observing the polarity marking.  
1. Turn on the connected components and set the am-  
plifier for the DVD player input.  
2
[
]
When you are going to leave the listening room  
1
POWER  
When the power is on or standby, it can be turned off  
by pressing the POWER button on the player main  
unit. (The "STANDBY" indicator does not lit in this  
status.)  
\
\
2. Press  
on the joystick remote to turn the  
player main unit on.  
When the "STANDBY" indicator is lit, the power  
of the player main unit cannot be turned on by  
pressing the POWER button on the main unit.  
(To turn the power of the player main unit on it,  
press the 3button.)  
Remote control range:  
3. The player's tray starts rotation to detect if any disc  
is inserted, and the display shows "MECHA INIT"  
(Mechanism Initialization).  
6m  
30°  
30°  
4. When no disc is inserted, the display shows "NO  
@
If the joystick remote is used  
outside this area, correct  
operations will not be possible.  
DISC" and the player enters stop mode.  
If there is any disc inserted in the tray at the  
moment the power is turned ON, playback of  
the disc starts automatically. If you want to  
perform setups, press the 7 STOP button on  
the joystick remote or the 7button on the player  
main unit to stop the player. The setup  
operations are not available while a disc is being  
played.  
When the controllable distance of the joystick  
remote reduces, replace both batteries with new  
ones.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
Control Buttons Used in Setups Basic Operations in Setup Screen  
ENTER  
SET UP button: Press to display the "SETUP MENU".  
(Set the mode switch to the Purple position before  
pressing this button.)  
The "SET UP MENU" includes the "MAIN", "SOUND"  
and "VISUAL" menus. When a setup screen is  
displayed, select the desired item according to the  
purpose.  
3. Press  
to open the setup screen.  
While a setup screen is displayed, tilting the  
joystick toward "EXIT" allows the setup mode  
to be canceled and tilting it toward "MENU"  
returns to the "SETUP MENU".  
Joystick: Tilt the joystick in the 4 directions of up,  
down, left and right to move the cursor to the de-  
sired point.  
If the power is turned off while the setup screen  
remains displayed after setting changes, the changes  
will be invalid. Be sure to close the setup screen before  
turning power off.  
4. Select the desired item by tilting the joystick in the  
ENTER button: After moving the cursor to the de-  
sired point, press the ENTER button to enter the  
point and display the next setup screen.  
ENTER  
required direction, then press  
setup change screen.  
to open the  
1. Set the mode switch of the joystick remote to the  
Purple position.  
RETURN button: Press to return to the previous setup  
screen.  
1
5. Select a setting by tilting the joystick in the required  
2. Press  
to open the "SET UP MENU" in which  
SET UP  
Numeric buttons, C (Clear) button: Use these but-  
tons to input a figure using numeric buttons or to  
clear an input with the C button. (Set the mode  
switch to Orange position before pressing any of  
these buttons.)  
ENTER  
direction and press  
memory.  
to enter the change in  
"MAIN" is displayed.  
SET UP MENU  
Press the RETURN button or tilt the joystick to  
the left to return to the setup screen.  
EXIT  
For actual setup operations, see page 18 and after.  
MAIN  
ENTER button  
ENTER  
Joystick  
Mode switch  
¢
INDEX  
3
PAGE  
PLAY  
4
PAGE  
INDEX  
7
Tilt the joystick up or down to switch the displayed  
STOP  
menu name to "SOUND" or "VISUAL".  
ON SCREEN  
TOP MENU  
SQ.MODE  
P.MODE  
When you press the RETURN button or tilt the  
joystick in the direction of arrow "EXIT" while  
the "SET UP MENU" screen is displayed, the  
setup mode can be canceled.  
RETURN  
RETURN button  
8
+10  
¡
1
0
C
C (Clear) button  
REPEAT A-B REPEAT CHECK  
SET UP button  
1
2
3
SET UP  
ALL INFO.  
Numeric buttons  
4
5
6
T.SEARCH  
TEXT DISP.  
SKIP  
7
8
9
P.AUDIO  
AUDIO  
P.B.C.  
TIME DISP.  
MENU  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
When "MAIN" is selected in "SET UP  
MENU":  
When "SOUND" is selected in "SET UP  
MENU":  
"Rating" Setting  
*
The setups according to the connected TV, viewing  
restriction, DVD VIDEO mode, OSD position, on-  
screen messages and IPB display can be set.  
"SOUND" is to be selected when you want to set the  
audio output method when system components are  
connected using the digital audio output connector  
of the player.  
Sets the viewing restriction of DVD VIDEO. (This  
functions only with DVD VIDEO discs  
compatible with viewing restriction.)  
When the system is connected using the 6CH.  
OUTPUT jacks of the player, also select "SOUND" to  
set the speakers, audio output during DVD or VCD  
search, dynamic range control function and audio  
filters.  
"TV Aspect" Setting  
)
MAIN  
Sets the picture aspect ratio according to that of  
7
Level 8  
Rating  
the connected TV.  
7
7
7
TV Aspect  
4:3  
"TV Mode" Setting  
)
TV Mode  
Letterbox  
Standard  
TV Monitor Type  
This setting is required when the aspect ratio of  
7
EXIT  
MENU  
DVD VIDEO Mode  
Off  
the connected TV is 4:3.  
7
7
OSD Position  
Normal  
On  
On Screen Message  
"TV Monitor Type" Setting  
¡
SOUND  
7
IPB Display  
Off  
Set this item according to the format of the  
Digital Audio  
7
connected TV or video monitor.  
PCM Down Conversion  
Dolby Digital  
On  
7
7
7
Bitstream  
Bitstream  
Bitstream  
"DVD VIDEO Mode" Setting  
Sets the play mode of DVD discs.  
"OSD Position" Setting  
™
DTS  
MPEG  
MENU  
EXIT  
Speaker Setting  
™
Audio During Search  
Dynamic Range Control  
Audio Filter  
7
7
7
On  
Sets the position of the OSD (On-Screen  
Wide  
Filter 60kHz  
Display).  
"On Screen Message" Setting  
Switches the on-screen message on/off.  
"IPB Display" Setting  
£
¢
Switches the IPB display on/off.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
When "VISUAL" is selected in "SET UP  
MENU":  
"Digital Audio PCM Down Conversion" Setting  
"Player Menu Language" Setting  
›
Select "VISUAL" when you want to change the  
language used to display the menu screens, language  
use in menus on the disc, audio language, subtitle  
language, etc.  
§
Sets the language used to display the menu  
Switches on/off the down-sampling conversion  
for the digital signal output with a high sampling  
rate.  
screens of the player.  
"Disc Menu Language" Setting  
›
Also select "VISUAL" to set the still mode, FL mode,  
video format conversion system or TV SCART  
connector output signals.  
Sets the language used to display the menu screens  
"Digital Audio Dolby Digital" Setting  
Sets the Dolby Digital output.  
"Digital Audio DTS" Setting  
Sets the DTS output.  
§
•
•
of the disc.  
"Audio Language" Setting  
Sets the language of the disc audio.  
"Subtitle Language" Setting  
Sets the language of the disc subtitles.  
"Still Mode" Setting  
fi
fl
fl
‡
VISUAL  
"Digital Audio MPEG" Setting  
7
Player Menu Language  
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
English  
English  
English  
English  
Auto  
Sets the MPEG output.  
"Speaker Setting"  
7
7
7
7
7
7
7
Reduces blur in still images.  
"FL Mode" Setting  
This setting is required when the 6CH. OUTPUT  
MENU  
EXIT  
FL Mode  
Brightness  
On  
jacks of the player is used in system connection.  
Sets the brightness of the FL display. (on the  
NTSC =PAL  
player front panel.)  
"Audio During Search" Setting  
¤
Composit  
SCART Output Select  
"NTSC = PAL" Setting  
°
Switches on/off the audio during search.  
"Dynamic Range Control" Setting  
Switches if the signal from an NTSC format disc  
¤
is to be converted into PAL or not.  
Switches the dynamic range control function.  
"Audio Filter" Setting  
"SCART Output Select" Setting  
°
‹
The "NTSC = PAL" and "SCART Output  
Select" settings are not displayed in certain  
countries and areas.  
Switches the output signals from the TV SCART  
Sets the audio filters for protecting the connected  
connector of the player.  
speakers.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"MAIN" Setting  
Setting items  
Operation procedure  
"Rating" Setting  
"
": Select to return to the previous screen.  
1. Set the mode switch of the joystick remote to the  
This setting makes it possible to inhibit the playback  
of adult DVD videodiscs that you do not want the  
children to view. However, there are some discs which  
carries an X-rating indication on the jacket but do not  
contain recording of the viewing restriction label. With  
such discs, the viewing restriction of the player is  
invalid and playback cannot be inhibited.  
"8 No Limit" : Select to enable playback of any  
DVD discs whether their targets are adults,  
general public or children.  
Purple position.  
1
2. While the player is in stop mode, press  
to  
SET UP  
"7" to "2": Select to enable playback of DVD for  
general and children.  
display the "MAIN" menu of "SET UP MENU".  
This setting inhibits playback of adult-  
ENTER  
3. Press  
to open the setup screen.  
oriented DVD.  
The default setting is "Level 8" which means no  
restriction. When you change the restriction level for  
the first time, you will also be requested to register a  
password.  
"1": Select to play only the children-oriented DVD.  
This setting inhibits playback of adult- and  
general-oriented DVD.  
4. In the setup menu, select "Rating" by tilting the  
ENTER  
joystick up or down and press  
.
"0 Lock All": Select to inhibit any DVD. Use this  
setting for example when you want to inhibit  
playback of an adult-oriented DVD which does  
not contain the restriction information.  
Rating  
7
7
7
7
7
7
7
7
7
7
7
7
8 No Limit  
7
"Change Password": Select to change the viewing  
restriction password which has been registered  
before. (This item cannot be selected unless a  
password has already been registered.)  
6
5
4
3
2
1
"Temporary Unlocked": Select to disable  
temporarily the viewing restriction which has  
been set previously. (This item cannot be selected  
unless a password has been set previously.)  
0 Lock All  
Change Password  
Temporary Unlocked  
5. Select a viewing level by tilting the joystick up or  
ENTER  
down, then press  
input screen.  
to display the password  
See "Input of Password".  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
Input of Password  
When no password has been set previously:  
When a password has already been set:  
1 In step 5, the password input screen as shown  
below appears. Now, set the mode switch of the  
joystick remote to the Orange position, compose  
the password using the numeric buttons and  
press the ENTER button.  
In step 5, the password input screen as shown  
below appears. Now set the mode switch of the  
joystick remote to the Orange position, input the  
password using the numeric buttons and press  
the ENTER button.  
Rating  
Rating  
7
7
7Cange Level  
7Cange Level  
Input a 4-digit password.  
Input a 4-digit password.  
Then press ENTER.  
Then press ENTER.  
When " " in the screen is selected and the  
ENTER button is pressed, the display returns to  
the setting screen. (This effect can also be  
achieved by pressing the RETURN button or  
tilting the joystick toward the left.)  
When " " in the screen is selected and the  
ENTER button is pressed, the display returns to  
the setting screen. (This effect can also be  
achieved by pressing the RETURN button or  
tilting the joystick toward the left.)  
2 The password input screen changes to the con-  
firmation screen, and the input password is  
shown on the TV screen.  
If you select "Change Password", the screen for  
input of the new password will open. Input the new  
password using the numeric buttons and press the  
ENTER button. When the password confirmation  
screen appears, note the password in a memo and  
retain it in a safe place then pressing the ENTER  
button.  
Rating  
The player is locked.  
Please remember the password.  
Press ENTER to continue.  
0
2
1
4
3 Note the password in a memo and retain it in a  
safe place before pressing the ENTER button. The  
password is required when setting the viewing  
restriction.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"TV Aspect" Setting  
"TV Mode" Setting  
If the connected TV is a widescreen TV, set the aspect  
ratio (the ration between the horizontal and vertical  
sizes of TV screen) of the player output to 16:9.  
When the connected TV has a 4:3 aspect ratio while  
the played software is recorded in widescreen video,  
the mode of TV screen display can be selected.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
The player has been set to a the conventional aspect  
ratio of "4:3" before it was shipped from the factory.  
At the factory, the player has been set to "Letterbox".  
1
2. While the player is in stop mode, press  
to display  
SET UP  
Setting items  
the "MAIN" menu of "SET UP MENU".  
Setting items  
"
" : Select to return to the previous screen.  
"
" : Select to return to the previous screen.  
ENTER  
"Pan & Scan" : Select to play widescreen software  
with pan & scan specification on a pan & scan  
screen (screen with the left and/or right edges  
cut off). When widescreen software without pan  
& scan specification is played with this setting,  
it will be reproduced in the Letterbox screen  
3. Press  
to open the setup screen.  
"4 : 3" : Select when the connected TV uses the  
conventional aspect ratio of 4:3.  
4. In the setup menu, select "TV Aspect" by tilting  
"16 : 9" : Select when the connected TV uses the  
wide-screen aspect ratio of 16:9. Widescreen  
video will be reproduced in full screen. (Set the  
screen mode of the TV to the full mode.)  
ENTER  
the joystick up or down and press  
.
mode.  
e
7
Rating  
7
TV Aspect  
4:3  
TV Mode  
7
16:9  
TV Monitor Type  
DVD VIDEO Mode  
OSD Position  
On Screen Message  
IPB Display  
"Letterbox" : Widescreen software without pan &  
scan specification is reproduced in the Letterbox  
screen (screen with black bands on the top and  
5. Select an aspect ratio by tilting the joystick up or  
bottom).  
e
ENTER  
down, then press  
memory.  
to enter the selection in  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"TV Monitor Type" Setting  
This setting adjusts the picture quality according to  
the type of the connected TV. If you use a means of  
display other than ordinary CRT TV, such as a video  
monitor or projector, you can adjust this setting  
according to your taste.  
Operation procedure  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
1. Set the mode switch of the joystick remote to the  
Purple position.  
Purple position.  
1
1
2. While the player is in stop mode, press  
to  
2. While the player is in stop mode, press  
to  
SET UP  
SET UP  
At the factory, the player has been set to "Standard"  
for using a CRT-based TV.  
display the "MAIN" menu of "SET UP MENU".  
display the "MAIN" menu of "SET UP MENU".  
ENTER  
ENTER  
3. Press  
to open the setup screen.  
3. Press  
to open the setup screen.  
Setting items  
"
" : Select to return to the previous screen.  
4. In the setup menu, select "TV Mode" by tilting the  
4. In the setup menu, select "TV Monitor Type" by  
"Standard" : Select when connecting a CRT-based  
ENTER  
ENTER  
joystick up or down and press  
.
tilting the joystick up or down and press  
.
TV. Usually select this item.  
"CRT Projector" : Select when connecting a 3-tube  
front projector.  
7
7
Rating  
Rating  
7
7
7
TV Aspect  
Pan & Scan  
Letterbox  
TV Aspect  
Standard  
"LCD Projector" : Select when connecting a LCD  
7
7
TV Mode  
TV Mode  
CRT Projector  
LCD Projector  
front projector.  
TV Monitor Type  
TV Monitor Type  
"Projection TV" : Select when connecting a  
DVD VIDEO Mode  
DVD VIDEO Mode  
7
7
Projection TV  
PDP  
projection TV.  
OSD Position  
OSD Position  
"PDP" : Select when connecting a plasma display  
On Screen Message  
On Screen Message  
panel.  
IPB Display  
IPB Display  
5. Select a TV screen mode by tilting the joystick up  
5. Select a monitor type by tilting the joystick up or  
ENTER  
ENTER  
or down, then press  
memory.  
to enter the selection in  
down, and press  
memory.  
to enter the selection in  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"DVD VIDEO Mode" Setting  
"OSD Position" Setting  
When playing a disc in which DVD VIDEO and DVD  
AUDIO are mixed, this setting makes it possible to  
select whether the DVD VIDEO part or DVD AUDIO  
part is to be played. To reproduce only the DVD VIDEO  
part, set this item to "On".  
When the connected TV is a widescreen TV, the OSD  
(On-Screen Display) or on-screen messages may be  
displayed incorrectly or overflow outside the screen  
depending on the TV screen mode setting. The OSD  
position switching makes it possible to display the  
OSD and on-screen messages normally.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1
2. While the player is in stop mode, press  
to  
SET UP  
At the factory, the player has been set to "Off" with  
which the DVD AUDIO part is played back.  
display the "MAIN" menu of "SET UP MENU".  
At the factory, the player has been set to "Normal".  
ENTER  
3. Press  
to open the setup screen.  
Setting items  
Setting items  
"
" : Select to return to the previous screen.  
"
" : Select to return to the previous screen.  
4. In the setup menu, select "DVD VIDEO Mode" by  
"On" : Select to play only the DVD VIDEO part in  
"Normal" : Select to display the OSD and messages  
on the top of the TV screen. Usually select this  
setting.  
ENTER  
tilting the joystick up or down and press  
.
a DVD VIDEO/DVD AUDIO mixed disc.  
"Off" : Select to pay only the DVD AUDIO part in  
a DVD VIDEO/DVD AUDIO mixed disc.  
"Cinema" : Select to display the OSD and messages  
on the lower part of the TV screen. Select this  
setting when the OSD or messages are deviated  
outside the TV screen.  
7
Rating  
7
TV Aspect  
On  
Off  
7
TV Mode  
TV Monitor Type  
DVD VIDEO Mode  
OSD Position  
On Screen Message  
IPB Display  
5. Select "On" or "Off" by tilting the joystick up or  
ENTER  
down, then press  
memory.  
to enter the selection in  
This setting is reset to default "Off" when the  
disc is changed or the power is set to off or  
standby.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"On Screen Message" Setting  
This setting makes it possible to enable or display of  
on-screen messages which notifies the user of various  
information.  
Operation procedure  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
1. Set the mode switch of the joystick remote to the  
Purple position.  
Purple position.  
At the factory, the player has been set to "On" for  
displaying on-screen messages.  
1
1
2. While the player is in stop mode, press  
to  
2. While the player is in stop mode, press  
to  
SET UP  
SET UP  
display the "MAIN" menu of "SET UP MENU".  
display the "MAIN" menu of "SET UP MENU".  
Setting items  
"
" : Select to return to the previous screen.  
ENTER  
ENTER  
3. Press  
to open the setup screen.  
3. Press  
to open the setup screen.  
"On" : Select to display on-screen messages.  
4. In the setup menu, select "OSD Position" by tilting  
4. In the setup menu, select "On Screen Message"  
"Off" : Select to not to display on-screen messages.  
ENTER  
ENTER  
the joystick up or down and press  
.
by tilting the joystick up or down and press  
.
7
7
Rating  
Rating  
7
7
TV Aspect  
Normal  
TV Aspect  
On  
Off  
7
TV Mode  
TV Mode  
TV Monitor Type  
7
TV Monitor Type  
Cinema  
DVD VIDEO Mode  
DVD VIDEO Mode  
OSD Position  
OSD Position  
On Screen Message  
IPB Display  
On Screen Message  
IPB Display  
5. Select the OSD position by tilting the joystick up  
5. Select "On" or "Off" by tilting the joystick up or  
ENTER  
ENTER  
or down, then press  
memory.  
to enter the selection in  
down, then press  
memory.  
to enter the selection in  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"IPB Display" Setting  
With the MPEG2 which is one of the video display  
methods of DVD, each picture is divided into the  
following three picture types before being coded in  
digital signal.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1
2. While the player is in stop mode, press  
to  
SET UP  
I-picture (in-frame coding): This is the standard  
video and can constitute a picture by itself. As the  
highest picture quality can be obtained, the still  
image of I-picture is most suitable for use when  
adjusting the picture quality.  
display the "MAIN" menu of "SET UP MENU".  
ENTER  
3. Press  
to open the setup screen.  
4. In the setup menu, select "IPB Display" by tilting  
P-picture (forward prediction coding): Picture cal-  
culated based on past pictures (I-picture or P-pic-  
ture).  
ENTER  
the joystick up or down and press  
.
B-picture (bidirectional prediction coding): Pic-  
ture calculated by comparing the previous and next  
pictures (I-pictures or P-pictures). This picture type  
contains least amount of video information.  
7
Rating  
7
TV Aspect  
On  
Off  
7
TV Mode  
TV Monitor Type  
DVD VIDEO Mode  
When IPB Display is set to "On", the I, P or B type of  
DVD still picture is displayed on the TV screen to help  
identify whether the picture is I-picture, P-picture or  
B-picture. This makes it possible to find the I-picture  
which is the standard video containing most amount  
of information.  
OSD Position  
On Screen Message  
IPB Display  
5. Select "On" or "Off" by tilting the joystick up or  
At the factory, the player has been set to "Off" with  
which the IPB display is not shown.  
ENTER  
down, then press  
memory.  
to enter the selection in  
Setting items  
"
" : Select to return to the previous screen.  
"On" : Select to view the IPB display.  
"Off" : Select to not to view the IPB display.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORANDUM  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"SOUND" Setting  
"Digital Audio PCM Down  
Conversion" Setting  
"Digital Audio Dolby Digital"  
Setting  
The player can output digital signal with maximum  
sampling rate of 96 kHz from the digital audio output  
connector. When a DVD disc recorded in high  
sampling rate PCM is played, this setting makes it  
possible to select whether the signal is converted into  
48 kHz signal or 44.1 kHz/16-bit signal.  
Operation procedure  
When a DVD recorded in Dolby Digital is played, this  
setting makes it possible to select the audio signal from  
the digital output connector of the player.  
1. Set the mode switch of the joystick remote to the  
Purple position.  
At the factory, the player has been set to "Bitstream" to  
enable digital connection to an AV amplifier with built-  
in Dolby Digital decoder. Change the setting to "PCM"  
when the digitally connected amplifier does not  
incorporate the decoder.  
1
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "SOUND"  
At the factory, the player has been set to "On" for AV  
amplifiers incompatible with high sampling rate  
digital signal connection. If the connected AV amplifier  
is compatible with 96 kHz digital input, change the  
setting to "Off".  
menu of "SET UP MENU".  
Setting items  
ENTER  
3. Press  
to open the setup screen.  
"
" : Select to return to the previous screen.  
4. In the setup menu, select "Digital Audio PCM  
"Bitstream" : The signal is output as a bitstream.  
Select when connecting a component containing  
Dolby Digital decoder.  
Setting items  
Down Conversion" by tilting the joystick up or  
"
" : Select to return to the previous screen.  
ENTER  
"On" : Select to down-convert the signal to 44.1  
kHz/16-bit PCM signal. Select this setting when  
the connected AV amplifier is incompatible with  
96 kHz digital input.  
down and press  
.
"PCM" : The signal is converted onto 48 kHz  
(2CH.) PCM signal before being output. Select  
when connecting a component without Dolby  
Digital decoder.  
7
Digital Audio  
7
7
On  
Off  
PCM Down Conversion  
Dolby Digital  
DTS  
The analog output signals are also converted  
accordingly.  
"Off" : Select to skip down conversion. Select this  
setting when the connected AV amplifier is  
compatible with 96 kHz digital input. However,  
if the disc inhibits the 96 kHz digital output,  
the signal is down-converted even when this  
setting is selected.  
MPEG  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Audio Filter  
With DVD AUDIO discs, the signal is always  
output after down sampling conversion.  
5. Select "On" or "Off" by tilting the joystick up or  
ENTER  
down, then press  
memory.  
to enter the selection in  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Digital Audio DTS" Setting  
When a DVD or DTS-CD recorded in DTS is played,  
this setting makes it possible to select the audio signal  
output from the digital output connector.  
Operation procedure  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1. Set the mode switch of the joystick remote to the  
At the factory, the player has been set to "Bitstream"  
to enable digital connection to an AV amplifier with  
built-in DTS decoder. Change the setting to "PCM"  
when the digitally connected amplifier does not  
incorporate the decoder.  
Purple position.  
1
2. While the player is in stop mode, press  
and  
SET UP  
1
2. While the player is in stop mode, press  
and  
tilt the joystick up or down to display the "SOUND"  
SET UP  
tilt the joystick up or down to display the "SOUND"  
menu of "SET UP MENU".  
menu of "SET UP MENU".  
Setting items  
ENTER  
3. Press  
to open the setup screen.  
"
" : Select to return to the previous screen.  
ENTER  
3. Press  
to open the setup menu.  
4. In the setup menu, select "Digital Audio DTS" by  
"Bitstream" : The signal is output as a bitstream.  
Select when connecting a component containing  
DTS decoder.  
4. In the setup menu, select "Digital Audio Dolby  
ENTER  
tilting the joystick up or down and press  
.
Digital" by tilting the joystick up or down and  
"PCM" : The signal is converted onto 48 kHz  
(2CH.) PCM signal before being output. Select  
when connecting a component without DTS  
decoder.  
ENTER  
7
Digital Audio  
press  
.
PCM Down Conversion  
Dolby Digital  
DTS  
7
7
Bitstream  
PCM  
7
Digital Audio  
PCM Down Conversion  
Dolby Digital  
7
7
Bitstream  
PCM  
MPEG  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Audio Filter  
DTS  
MPEG  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Audio Filter  
5. Select the audio output by tilting the joystick up or  
ENTER  
down, and press  
memory.  
to enter the selection in  
5. Select the audio output by tilting the joystick up or  
ENTER  
down, and press  
memory.  
to enter the selection in  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Digital Audio MPEG" Setting  
"Speaker Setting"  
When a DVD recorded in MPEG Audio is played, this  
setting makes it possible to select the audio signal  
output from the digital output connector.  
When an associated system component is connected  
to the 6CH. OUTPUT jacks of the player, this setting  
is required on the player.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
At the factory, the player has been set to "Bitstream"  
to enable digital connection to an AV amplifier with  
built-in MPEG decoder. Change the setting to "PCM"  
when the digitally connected amplifier does not  
incorporate the decoder.  
At the factory, the player has been set to the standard  
setting with which the speakers can reproduce the 6-  
channel signals as soon as the connections are made.  
This setting can be changed according to each listening  
environment. When you want to change this setting,  
be sure to perform it in the listening area in your own  
listening environment.  
1
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "SOUND"  
menu of "SET UP MENU".  
Setting items  
ENTER  
3. Press  
to open the setup screen.  
"
" : Select to return to the previous screen.  
For the "Speaker Setting" when an AV amplifier  
is connected digitally to the player, refer to the  
instruction manual of the AV amplifier.  
4. In the setup menu, select "Digital Audio MPEG"  
"Bitstream" : The signal is output as a bitstream.  
Select when connecting a component containing  
MPEG decoder.  
ENTER  
by tilting the joystick up or down and press  
.
Front speakers (L, R)  
Size: "Large"  
"PCM" : The signal is converted onto 48 kHz (2CH)  
PCM signal before being output. Select when  
connecting a component without MPEG  
decoder.  
7
Digital Audio  
Center speaker (C)  
Size: "Large"  
PCM Down Conversion  
Dolby Digital  
7
7
Bitstream  
PCM  
DTS  
Use of center speaker: Used  
Level: "0 dB"  
MPEG  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Delay time: "0 ms"  
Surround speakers (LS, RS)  
Size: "Large"  
Audio Filter  
Use of surround speakers: Used  
Level: "0 dB"  
5. Select the audio output by tilting the joystick up or  
ENTER  
down, and press  
memory.  
to enter the selection in  
Delay time: "0 ms"  
Subwoofer  
Use of subwoofer: Used  
Level: "0 dB"  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
Operation procedure  
6. Select the desired speaker setting by tilting the joy-  
5. Set each speaker by tilting the joystick up/down  
stick up/down and to the left/right.  
1. Set the mode switch of the joystick remote to the  
and to the left/right. Select the item to be set and  
Purple position.  
If " " is selected, the screen in step 5 appears again  
without entering the performed changes in the  
speaker setting in memory.  
ENTER  
press  
.
1
2. While the player is in stop mode, press  
and  
SET UP  
Speaker Setting  
tilt the joystick up or down to display the "SOUND"  
[Front Seakers setting]  
Test  
L
Exit  
menu of "SET UP MENU".  
Speaker Setting  
C
R
Exit  
L R  
Size  
LS  
SW  
RS  
ENTER  
Large  
Normal  
3. Press  
to open the setup screen.  
0
dB  
C
0 ms  
L
R
4. In the setup menu, select "Speaker Setting" by  
0 dB  
SW  
dB  
C
0
dB  
ENTER  
0 ms  
tilting the joystick up or down and press  
.
L
R
0 dB  
RS  
LS  
0
0
ms  
0 dB  
SW  
dB  
RS  
LS  
0
0
ms  
0 dB  
To set the front speakers: Select and adjust either  
"L" or "R". The other, non-selected front speaker  
will automatically set to the same setting as the  
selected speaker.  
Size: Select "Normal" when the connected speaker  
is incapable of reproducing audio below 100 Hz.  
Select "Large" when the connected speaker can  
reproduce audio below 100 Hz.  
To set the center speaker: Select "C".  
To set the surround speakers: Select and adjust  
After completing the speaker setting, select "Exit"  
to enter the setting and return to the screen in  
step 5.  
"LS" and "RS" separately.  
To set the subwoofer: Select "SW".  
To output the test tone: Select "Test"  
To exit from the screen: Select "Exit"  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
[Center speaker setting]  
Delay Time Setting  
Speaker Setting  
C
When playing a DVD recorded with Dolby Digital audio, the distances from the listening position to the  
center and surround speakers should ideally be identical to those of all other speakers except for the  
subwoofer. The delay time setting makes it possible to compensate for the difference in distances of actual  
speakers by delaying the audio output from the center speaker and surround speakers so that the sounds  
from all speakers reach the listening position at the same timing. (The delay time adjustment is available  
only with Dolby Digital.)  
Exit  
Off  
Size  
Large  
Normal  
-6 -5 -4 -3 -2 -1  
0
+1 +2 +3 +4 +5 +6  
Level  
dB  
0
1.3  
3.9  
5.3  
Delay Time  
2.6  
ms  
C
0
dB  
0 ms  
L
R
0 dB  
Before starting the speaker setting, see the following figure and measure distance A of the center speaker  
(A = Df - Dc) and distance B for the surround speakers (B = Df - Ds). The standard delay time settings can  
be identified based on these values and the following tables.  
SW  
dB  
RS  
LS  
0
0
ms  
0 dB  
Delay time of center speaker  
Ideal center speaker position  
Size: Select "Normal" when the connected speaker  
is incapable of reproducing audio below 100 Hz.  
Select "Large" when the connected speaker can  
reproduce audio below 100 Hz.  
Distance A  
(A = Df - Dc)  
Setting Value  
L
R
30°  
A
Approx. 50 cm  
Approx. 100 cm  
Approx. 150 cm  
Approx. 200 cm  
"1.3" ms  
"2.6" ms  
"3.9" ms  
"5.3" ms  
Use of center speaker: Select "Off" if the center  
C
speaker is not used.  
Dc  
Level: Set the volume level.  
Df  
Ds  
Delay Time: Set the delay time. For the setting  
SW  
value, see "Delay Time Setting".  
If distance Df is equal to or shorter than  
Dc, set to "0".  
B
After completing the speaker setting, select "Exit"  
to enter the setting and return to the screen in  
step 5.  
LS  
RS  
Delay time of surround speakers  
120°  
Distance B  
Setting Value  
(B = Df - Ds)  
Approx. 200 cm  
Approx. 400 cm  
Approx. 600 cm  
"5.3" ms  
"10.6" ms  
"15.9" ms  
Ideal surround speaker positions  
All speakers should be laid out within a circle  
as shown in the figure.  
If distance Df is equal to or shorter than  
Ds, set to "0".  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
7. After completing the speaker settings, select "Test"  
[Surround speakers setting]  
[Subwoofer setting]  
by tilting the joystick up/down or to the left/right  
Speaker Setting  
Speaker Setting  
SW  
Exit  
LS  
Size  
Exit  
Off  
ENTER  
and press  
. The cursor will automatically move  
Size  
On  
Off  
Large  
Normal  
-6 -5 -4 -3 -2 -1  
0
+1 +2 +3 +4 +5 +6  
-6 -5 -4 -3 -2 -1  
0
+1 +2 +3 +4 +5 +6  
Level  
Level  
across the speakers in sequence from "L" and the  
test tone is output from each speaker indicated by  
the cursor.  
dB  
dB  
0
5.3  
15.9  
Delay Time  
10.6  
ms  
C
0
dB  
C
0
dB  
0 ms  
0 ms  
L
R
L
R
0 dB  
SW  
0 dB  
SW  
dB  
ENTER  
Press  
again to display the speaker setting  
RS  
RS  
LS  
LS  
0
dB  
0
ms  
0 dB  
0
0
ms  
0 dB  
screen for the speaker being indicated by the cursor.  
Size: Select "Normal" when the connected speaker  
is incapable of reproducing audio below 100 Hz.  
Select "Large" when the connected speaker can  
reproduce audio below 100 Hz.  
Use of subwoofer: Select "Off" if the subwoofer  
The cursor skips the subwoofer and the speakers  
set to "Off" and test tone is not output from  
them.  
is not used.  
Level: Set the volume level.  
After adjusting the level of each speaker channel  
by tilting the joystick to the left or right, press  
the ENTER button, then select "Exit" and press  
the ENTER button to restart the test tone output.  
Repeat the volume level adjustment until the  
volumes of all speakers are identical.  
After completing the speaker setting, select "Exit"  
to enter the setting and return to the screen in  
step 5.  
Use of surround speaker: Select "Off" if the  
surround speaker is not used.  
Level: Set the volume level.  
Delay Time: Set the delay time. For the setting  
value, see "Delay Time Setting".  
When the joystick is tilted in any direction during  
the test tone output, the test tone output stops.  
(The same effect can also be obtained by pressing  
the RETURN button)  
After completing the speaker setting, select "Exit"  
to enter the setting and return to the screen in  
step 5.  
8. After completing the speaker setting, select "Exit"  
ENTER  
and press  
to enter the setting in memory.  
As the test tone is not output from the subwoofer,  
its volume level should be adjusted after listening  
to the actual sound.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Audio During Search" Setting  
"Dynamic Range Control"  
Setting  
During DVD or VCD search at the first speed step, this  
setting makes it possible to select whether the  
reproduced audio is output or not.  
Operation procedure  
When playing a DVD recorded with Dolby Digital  
Surround, set the dynamic range control according to  
the software being played. For instance, when the  
words are hard to be listened to due to effects sound  
in a move, this setting makes it possible to adjust the  
volume level of only the low-level sound and can  
reduce repetition of complicated volume level  
adjustments.  
1. Set the mode switch of the joystick remote to the  
Purple position.  
At the factory, the player has been set to "On" for  
outputting the reproduced audio during search.  
1
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "SOUND"  
Setting items  
"
" : Select to return to the previous screen.  
menu of "SET UP MENU".  
"On" : Select to output audio during search.  
ENTER  
At the factory, the player has been set to "Wide" with  
which the audio levels recorded in discs are reproduced  
as they are.  
3. Press  
to open the setup screen.  
"Off" : Select to mute audio during search.  
4. In the setup menu, select "Audio During Search"  
ENTER  
by tilting the joystick up or down and press  
.
Setting items  
"
" : Select to return to the previous screen.  
7
"Wide" : Select to reproduced the audio at the level  
Digital Audio  
recorded in the disc.  
PCM Down Conversion  
Dolby Digital  
7
7
On  
Off  
"Normal" : Select to reduce the difference between  
DTS  
the maximum and minimum volume levels.  
MPEG  
"Midnight" : Select to further reduce the difference  
between the maximum and minimum volume  
levels. This setting is suitable for low-level  
listening in late at night, etc.  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Audio Filter  
5. Select "On" or "Off" by tilting the joystick up or  
ENTER  
down, then press  
memory.  
to enter the selection in  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Audio Filter" Setting  
DVD AUDIO is recorded with a maximum sampling  
rate of 192 kHz and theoretically capable of  
reproducing up to 96 kHz. As a result, the speakers  
used may be damaged if they are not compatible with  
high frequencies. When an ordinary speaker system is  
connected, set the "Audio Filter" setting to "Filter  
60 kHz" to protect the speakers. When the speaker in  
use are compatible with high frequencies, set this  
setting to "Filter 110 kHz". (For details, refer to the  
instruction manuals provided with your speakers.)  
Operation procedure  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1
2. While the player is in stop mode, press  
and  
SET UP  
1
2. While the player is in stop mode, press  
and  
tilt the joystick up or down to display the "SOUND"  
SET UP  
tilt the joystick up or down to display the "SOUND"  
menu of "SET UP MENU".  
menu of "SET UP MENU".  
ENTER  
3. Press  
to open the setup screen.  
At the factory, the player has been set to "Filter 60  
kHz" to protect the speakers from damage.  
ENTER  
3. Press  
to open the setup screen.  
4. In the setup menu, select "Audio Filter" by tilting  
Setting items  
4. In the setup menu, select "Dynamic Range  
ENTER  
the joystick up or down and press  
.
"
" : Select to return to the previous screen.  
Control" by tilting the joystick up or down and  
"Filter 60 kHz" : Select when the speakers in use  
are not suitable for reproduction of high  
frequencies.  
ENTER  
7
Digital Audio  
press  
.
PCM Down Conversion  
Dolby Digital  
7
7
Filter 60kHz  
Filter 110kHz  
"Filter 110 kHz" : Select when the speakers in use  
7
Digital Audio  
DTS  
are suitable for reproduction of high frequencies.  
MPEG  
PCM Down Conversion  
Dolby Digital  
7
7
Wide  
Normal  
Midnight  
Speaker Setting  
7
DTS  
Audio During Search  
Dynamic Range Control  
MPEG  
Speaker Setting  
Audio During Search  
Dynamic Range Control  
Audio Filter  
5. Select "Filter 60 kHz" or "Filter 110 kHz" by tilting  
Audio Filter  
ENTER  
the joystick up or down, then press  
the selection in memory.  
to enter  
5. Select the level by tilting the joystick up or down,  
ENTER  
then press  
to enter the selection in memory.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"VISUAL" Setting  
"Player Menu Language"  
Setting  
"Disc Menu Language" Setting  
This setting makes it possible to select the language  
used to display the menus recorded in discs. (If the  
selected language is not used in a specific disc, the  
language specified as the priority language for the disc  
will be used.)  
Operation procedure  
This setting makes it possible to select the language  
used to display the menus of the player.  
1. Set the mode switch of the joystick remote to the  
Purple position.  
At the factory, the language used in displaying the  
menus of the player has been set to "English".  
1
2. While the player is in stop mode, press  
and  
SET UP  
At the factory, the language used in displaying the  
menus of the disc has been set to "English".  
tilt the joystick up or down to display the "VISUAL"  
Setting items  
menu of "SET UP MENU".  
"
" : Select to return to the previous screen.  
Setting items  
"
" : Select to return to the previous screen.  
"English" : Select to display menus in English.  
"French" : Select to display menus in French.  
"Spanish" : Select to display menus in Spanish.  
"German" : Select to display menus in German.  
"Italian" : Select to display menus in Italian.  
"Japanese" : Select to display menus in Japanese.  
"Chinese" : Select to display menus in Chinese.  
ENTER  
3. Press  
to open the setup screen.  
"English" : Select to display menus in English.  
"French" : Select to display menus in French.  
"Spanish" : Select to display menus in Spanish.  
"German" : Select to display menus in German.  
"Italian" : Select to display menus in Italian.  
"Chinese" : Select to display menus in Chinese.  
4. In the setup menu, select "Player Menu Language"  
ENTER  
by tilting the joystick up or down and press  
.
7
Player Menu Language  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
English  
7
7
7
7
7
French  
Spanish  
German  
Italian  
"Other ----" : Select to specify the language  
using a code No. listed in the "Disc Language  
"Taiwanese" : Select to display menus in traditional  
Chinese letters.  
Code Table".  
‚
FL Mode  
NTSC =PAL  
Japanese  
Chinese  
Taiwanese  
The languages displayed with this setting item  
7
7
SCART Output Select  
are variable depending on country and area.  
Operation procedure  
5. Select the language by tilting the joystick up or  
1. Set the mode switch of the joystick remote to the  
Purple position.  
ENTER  
down, then press  
memory.  
to enter the selection in  
1
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "VISUAL"  
menu of "SET UP MENU".  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Audio Language" Setting  
1
ENTER  
This setting makes it possible to select the language  
used to reproduce the audio recorded in the disc in  
the desired language. (If the selected language is not  
used in a specific disc, the language specified as the  
priority language for the disc will be used.)  
3. Press  
to open the setup screen.  
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "VISUAL"  
4. In the setup menu, select "Disc Menu Language"  
menu of "SET UP MENU".  
ENTER  
by tilting the joystick up or down and press  
.
ENTER  
At the factory, the audio language has been set to  
"English".  
3. Press  
to open the setup screen.  
7
Player Menu Language  
4. In the setup menu, select "Audio Language" by  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
English  
French  
Spanish  
German  
Italian  
Setting items  
7
7
7
7
7
ENTER  
tilting the joystick up or down and press  
.
"
" : Select to return to the previous screen.  
"Original" : Select to reproduce audio in the  
language specified as the priority language by  
the disc.  
FL Mode  
7
Player Menu Language  
NTSC =PAL  
Other  
----  
7
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
Original  
English  
French  
SCART Output Select  
"English" : Select to display menus in English.  
7
7
7
"French" : Select to display menus in French.  
"Spanish" : Select to display menus in Spanish.  
"German" : Select to display menus in German.  
"Italian" : Select to display menus in Italian.  
"Chinese" : Select to display menus in Chinese.  
Spanish  
German  
5. Select the language by tilting the joystick up or  
FL Mode  
7
7
NTSC =PAL  
Italian  
Other  
ENTER  
down, then press  
to enter the selection in  
SCART Output Select  
----  
memory.  
When "Other ----"is selected, set the mode  
switch of the joystick remote to the Orange  
5. Select the desired audio language by tilting the  
"Other ----" : Select to specify the language  
using a code No. listed in the "Disc Language  
ENTER  
position, input the desired code No. using the  
numeric keys and press the ENTER button.  
joystick up or down, then press  
to enter the  
Code Table".  
‚
selection in memory.  
If you make a mistake when pressing numeric  
keys, press the C button and restart the code No.  
input from the beginning.  
The languages displayed with this setting item  
When "Other ----"is selected, set the mode  
switch of the joystick remote to the Orange  
are variable depending on country and area.  
position, input the desired code No. using the  
numeric keys and press the ENTER button.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
If you make a mistake when pressing numeric  
keys, press the C button and restart the code No.  
input from the beginning.  
Purple position.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"Subtitle Language" Setting  
"Still Mode" Setting  
This setting makes it possible to select the language  
used to display the subtitles recorded in discs. (When  
the disc does not contain the recording of the selected  
subtitle language, the default subtitle language defined  
for the disc will be used.)  
This setting makes it possible to reduce blur in still  
pictures automatically. In addition, it also allows you  
to select the frame still or field still picture.  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
At the factory, the player has been set to "Auto", with  
which frame still and field still pictures are switched  
automatically.  
1
2. While the player is in stop mode, press  
and  
At the factory, the language used in displaying the  
subtitles has been set to "English".  
SET UP  
tilt the joystick up or down to display the "VISUAL"  
Setting items  
Setting items  
menu of "SET UP MENU".  
"
" : Select to return to the previous screen.  
"
" : Select to return to the previous screen.  
ENTER  
"Auto" : The subtitle language is selected automatically  
3. Press  
to open the setup screen.  
"Auto" : Frame still and field still pictures are  
switched automatically. Usually select this  
setting.  
according to the "Audio language" setting.  
Case in which subtitles are not displayed: When  
the voices are reproduced in the language  
selected with "Audio language", the subtitles  
are not displayed.  
4. In the setup menu, select "Subtitle Language" by  
ENTER  
"Frame" : Select to display still pictures in a higher  
picture quality. (As the field and still pictures are  
displayed alternately, the picture may blur  
accordingly.)  
tilting the joystick up or down and press  
.
Case in which subtitles are displayed: When  
the voices cannot be reproduced in the  
language selected with "Audio language",  
subtitles are displayed in the language selected  
with "Audio language".  
7
Player Menu Language  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
Auto  
"Field" : Select to display still pictures without blur.  
(As the video information is halved compared  
to the frame pictures, the picture quality  
deteriorates accordingly.)  
7
English  
7
7
7
7
7
French  
Spanish  
German  
Italian  
"English" : Select to display menus in English.  
"French" : Select to display menus in French.  
"Spanish" : Select to display menus in Spanish.  
"German" : Select to display menus in German.  
"Italian" : Select to display menus in Italian.  
"Chinese" : Select to display menus in Chinese.  
FL Mode  
NTSC =PAL  
SCART Output Select  
Other  
----  
5. Select the desired subtitle language by tilting the  
----" : Select to specify the language  
"Other  
ENTER  
joystick up or down, then press  
to enter the  
using a code No. listed in the "Disc Language  
Code Table".  
‚
selection in memory.  
The languages displayed with this setting item  
When "Other ----"is selected, set the mode  
switch of the joystick remote to the Orange  
are variable depending on country and area.  
position, input the desired code No. using the  
numeric keys and press the ENTER button.  
If you make a mistake when pressing numeric  
keys, press the C button and restart the code No.  
input from the beginning.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"FL Mode" Setting  
This setting makes it possible to select the brightness  
of the player's display panel.  
Operation procedure  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
1. Set the mode switch of the joystick remote to the  
At the factory, the player has been set to "Brightness",  
with which the display is permanently displayed in  
high brightness.  
Purple position.  
Purple position.  
1
1
2. While the player is in stop mode, press  
and  
2. While the player is in stop mode, press  
and  
SET UP  
SET UP  
tilt the joystick up or down to display the "VISUAL"  
tilt the joystick up or down to display the "VISUAL"  
Setting items  
"
" : Select to return to the previous screen.  
menu of "SET UP MENU".  
menu of "SET UP MENU".  
"Brightness" : The display is permanently in high  
ENTER  
ENTER  
3. Press  
to open the setup screen.  
3. Press  
to open the setup screen.  
brightness.  
"Dimmer" : The display is permanently displayed  
4. In the setup menu, select "Still Mode" by tilting  
4. In the setup menu, select "FL Mode" by tilting the  
in low brightness.  
ENTER  
ENTER  
the joystick up or down and press  
.
joystick up or down and press  
.
"Auto Off" : The display is disapled when playing  
a DVD VIDEO or VCD. (The display is shown  
when DVD AUDIO without video is played.) At  
this time, the "Disc 1 to 5" indicators light in  
low brightness and other indicators are off.  
7
7
7
7
7
Player Menu Language  
Player Menu Language  
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
Auto  
Frame  
Field  
Brightness  
Dimmer  
7
7
Auto Off  
FL Mode  
FL Mode  
NTSC =PAL  
NTSC =PAL  
SCART Output Select  
SCART Output Select  
5. Select the desired still mode by tilting the joystick  
5. Select the FL mode by tilting the joystick up or  
ENTER  
ENTER  
up or down, then press  
in memory.  
to enter the selection  
down, then press  
memory.  
to enter the selection in  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
"NTSC =PAL" Setting  
"SCART Output Select" Setting  
(For Europe and U.K.)  
(Except for the U.S.A. and Canada)  
Operation procedure  
This setting makes it possible to play an NTSC-format  
disc by converting signal into PAL format. Select "On"  
when it is required to convert NTSC-format discs into  
PAL signals.  
This setting makes it possible to select the output  
signals from the TV SCART connector of the player.  
(The VCR SCART connector always outputs composite  
video signals so its output signals cannot be selected.)  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1
2. While the player is in stop mode, press  
and  
When the "RGB" output signals are selected with this  
setting, the COMPONENT VIDEO OUTPUT jacks of  
the player do not output any video signal.  
SET UP  
Setting items  
tilt the joystick up or down to display the "VISUAL"  
"
" : Select to return to the previous screen.  
menu of "SET UP MENU".  
"On" : Select to enable conversion from NTSC to  
At the factory, the TV SCART connector output signals  
of the player has been set to "Composite".  
PAL.  
ENTER  
3. Press  
to open the setup screen.  
"Off" : Select to disable conversion from NTSC to  
Setting items  
PAL.  
4. In the setup menu, select "NTSC =PAL" by tilting  
"
" : Select to return to the previous screen.  
ENTER  
the joystick up or down and press  
.
"Composite" : Select to output composite video  
signal.  
"S Video" : Select to output S Video signals.  
7
Player Menu Language  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
On  
Off  
"RGB" : Select to output RGB signals.  
7
FL Mode  
NTSC =PAL  
SCART Output Select  
5. Select "On" or "Off" by tilting the joystick up or  
ENTER  
down, then press  
memory.  
to enter the selection in  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
Operation procedure  
1. Set the mode switch of the joystick remote to the  
Purple position.  
1
2. While the player is in stop mode, press  
and  
SET UP  
tilt the joystick up or down to display the "VISUAL"  
menu of "SET UP MENU".  
ENTER  
3. Press  
to open the setup screen.  
4. In the setup menu, select "SCART Output Select"  
ENTER  
by tilting the joystick up or down and press  
.
7
Player Menu Language  
7
Disc Menu Language  
Audio Language  
Subtitle Language  
Still Mode  
Composite  
S Video  
RGB  
7
7
FL Mode  
NTSC =PAL  
SCART Output Select  
5. Select the desired output signals by tilting the  
ENTER  
joystick up or down, then press  
selection in memory.  
to enter the  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Various Setups  
Disc Language Code Table  
Cord No. : Language  
6565 : Afar  
Cord No. : Language  
7089 : Frisian  
Cord No. : Language  
7771 : Malagasy  
7773 : Maori  
Cord No. : Language  
8382 : Serbian  
8385 : Sundanese  
8386 : Swedish  
8387 : Swahili  
8465 : Tamil  
6566 : Abkhazian  
6570 : Afrikaans  
6577 : Amharic  
6582 : Arabic  
7165 : Irish  
7168 : Scots Gaelic  
7176 : Galician  
7178 : Guarani  
7185 : Gujarati  
7265 : Hausa  
7775 : Macedonian  
7776 : Malayalam  
7778 : Mongolian  
7779 : Moldavian  
7782 : Marathi  
7783 : Malay  
6583 : Assamese  
6588 : Aymara  
6590 : Azerbaijani  
6665 : Bashkir  
6669 : Byelorussian  
6671 : Bulgarian  
6672 : Bihari  
8469 : Telugu  
8471 : Tajik  
7273 : Hindi  
8472 : Thai  
7282 : Croatian  
7285 : Hungarian  
7289 : Armenian  
7365 : Interlingua  
7378 : Indonesian  
7383 : Icelandic  
7384 : Italian  
7784 : Maltese  
8473 : Tigrinya  
8475 : Turkmen  
8476 : Tagalog  
8479 : Tonga  
8482 : Turkish  
8484 : Tatar  
7789 : Burmese  
7865 : Nauru  
7869 : Nepali  
6678 : Bengali; Bangla  
6679 : Tibetan  
6682 : Breton  
7876 : Dutch  
7879 : Nowegian  
7982 : Oriya  
8487 : Twi  
6765 : Catalan  
6779 : Corsican  
6783 : Czech  
7387 : Hebrew  
7465 : Japanese  
7473 : Yiddish  
7487 : Javanese  
7565 : Geogian  
7575 : Kazakh  
8065 : Punjabi  
8076 : Polish  
8575 : Ukrainian  
8582 : Urdu  
8083 : Pashto; Pushto  
8084 : Portuguese  
8185 : Quechua  
8277 : Rhaeto-Romance  
8279 : Romanian  
8285 : Russian  
8590 : Uzbek  
8673 : Vietnamese  
8679 : Volapük  
8779 : Wolof  
8872 : Xhosa  
8979 : Yoruda  
9072 : Chinese  
9085 : Zulu  
6789 : Welsh  
6865 : Danish  
6869 : German  
6890 : Bhutani  
6976 : Greek  
7576 : Greenlandic  
7577 : Cambodian  
7578 : Kannada  
7579 : Korean  
6978 : English  
6979 : Esperanto  
6983 : Spanish  
6984 : Estonian  
6985 : Basque  
7065 : Persian  
7073 : Finnish  
7074 : Fiji  
8365 : Sanskrit  
8368 : Sindhi  
7583 : Kashmiri  
7585 : Kurdish  
7589 : Kirghiz  
8372 : Serbo-Croatian  
8373 : Singhalese  
8375 : Slovak  
7665 : Latin  
8376 : Slovenian  
8377 : Samoan  
8378 : Shona  
7678 : Lingala  
7679 : Laothian  
7684 : Lithuanian  
7686 : Latvian; Lettish  
7079 : Faroese  
7082 : French  
8379 : Somali  
8381 : Albanian  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
To Be Noted  
Maintenance of the unit  
Disc handling precautions  
Manufactured under license from Dolby  
Laboratories. “DOLBY” and the double-D symbol are trademarks  
of Dolby Laboratories. Confidential Unpublished Works. ©1992-  
When the front panel or case becomes dirty, wipe with  
a soft, dry cloth. Do not use thinner, benzine, alcohol,  
etc. for these agents may cause discoloration.  
Handling : Hold a disc taking care not to touch the disc  
surface.  
1997 Dolby Laboratories. All rights reserved.  
Sticker  
In regard to contact cleaner  
Do not use contact cleaners because it could cause a  
malfunction. Be specially careful not to use contact  
cleaners containing oil, for they may deform the plastic  
component.  
Manufactured under license from Digital Theater  
Systems, Inc. US Pat. No. 5,451,942 and other worldwide patents  
issues and pending. “DTS” and “DTS Digital Surround” are  
trademarks of Digital Theater Systems, Inc. © 1996 Digital Theater  
Systems, Inc. All rights reserved.  
Sticky paste  
Do not attach paper or tape to either the playing  
side or the label side of the discs.  
Never play a cracked or warped disc  
It is prohibited by laws to duplicate, broadcast, perform in public  
or rent a disc without the permission of the copyright owners.  
During playback, the disc rotates at high speed in the  
player.  
Cleaning : If fingerprints or foreign matter become  
attached to the disc, lightly wipe the disc with a soft  
cotton cloth (or similar) from the center of the disc  
outwards in a radial manner.  
This product is compatible with the Macrovision type copy  
protection. Some discs contain the recording of copy inhibit  
signals, and the video may be disturbed when the video of such  
discs is recorded onto a VCR and played back.  
Therefore, to avoid danger, never use a cracked or  
deformed disc or a disc repaired with tape or adhesive  
agent.  
This product incorporates copyright protection technology that  
is protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation  
and other rights owners. Use of this copyright protection  
technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only  
unless otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
Please do not use discs which are not round because  
they may cause a malfunction.  
Disc accessories  
Storage : When a disc is not to be played for a long  
period of time, remove it from the player and store it  
in its case.  
The disc accessories (stabilizer, protection sheet,  
protection ring, etc.) which are marketed for improving  
the sound quality or protecting discs as well as the  
disc cleaner should not be used with this system  
because they may cause malfunction.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
Transport or moving precautions  
Caution on condensation  
FCC WARNING (For the U.S.A.)  
Condensation (of dew) may occur inside the unit when  
there is a great difference in temperature between this  
unit and the outside.  
When transporting or moving the player, first remove the  
disc and observe the following procedure.  
This equipment may generate or use radio frequency  
energy. Changes or modifications to this equipment  
may cause harmful interference unless the  
modifications are expressly approved in the  
instruction manual. The user could lose the  
authority to operate this equipment if an  
unauthorized change or modification is made.  
1. Turn the player power on.  
This unit may not function properly if condensation  
occurs. In this case, leave the unit for a few hours and  
restart the operation after the condensation has dried up.  
2. Wait for a few seconds, until the display shows "NO  
DISC".  
POWER  
Be specially cautious against condensation in a  
following circumsatance:  
3. Turn the player power off by pressing  
.
-
ON  
–
OFF  
When this unit is carried from a place to another across  
a large difference in temperature, when the humidity  
in the room where this unit is installed increases, etc.  
NOTE :  
DTS disclaimer clause  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment may cause harmful  
interference to radio communications, if it is not  
installed and used in accordance with the  
instructions. However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does cause harmful  
interference to radio or television reception, which  
can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
DTS Digital Surround™ is a discrete 5.1 channel digital  
audio format available on CD, LD, and DVD software  
which consequently cannot be decoded and played  
back inside most CD, LD, or DVD players. For this  
reason, when DTS-encoded software is played back  
through the analog outputs of the CD, LD, or DVD  
player, excessive noise will be exhibited. To avoid  
possible damage to the audio system, proper  
precautions should taken by the consumer if the analog  
outputs are connected directly to an amplification  
system. To enjoy DTS Digital Surround™ playback, an  
external 5.1 channel DTS Digital Surround™ decoder  
system must be connected to the digital output (S/P  
DIF, AES/EBU, or TosLink) of the CD, LD or DVD  
player.  
CAUTION (For the U.S.A.)  
Use of controls or adjustments or performance of  
procedures other than those specified herein may result  
in hazardous radiation exposure.  
In compliance with Federal Regulations, following are  
reproductions of labeles on, or inside the product relating  
to laser product safety.  
KENWOOD CORPORATION  
2967-3, ISHIKAWA-CHO,  
HACHIOJI-SHI,  
TOKYO, JAPAN  
KENWOOD CORP. CERTIFIES THIS  
EQUIPMENT CONFORMS TO DHHS  
REGULATIONS NO. 21 CFR  
––– Reorient or relocate the receiving antenna.  
1040.10, CHAPTER 1, SUBCHAPTER J.  
––– Increase the separation between the equipment  
and receiver.  
Location: Back Panel  
This unit is equipped with DTS Digital Surround™  
decoder.  
––– Connect the equipment into an outlet on a  
circuit different from that to which the receiver  
is connected.  
CAUTION- LASER RADIATION WHEN OPEN.  
DO NOT STARE INTO BEAM.  
––– Consult the dealer or an experienced radio / TV  
technician for help.  
Location: Laser Pick-up Unit Cover inside this  
product  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
DVF-R9030  
Glossary  
Linear PCM (Pulse Code Modula-  
tion): Audio signal format without  
using compression. In the DVD  
which has a very large disc capacity,  
the linear PCM signal using high  
sampling rate can be recorded.  
digitization per second. The original  
sound can be reproduced more faith-  
fully when the quantization bit  
count is larger.  
well as 2-channel stereo, and capable  
of recording a large amount of au-  
dio data efficiently in a disc.  
Letterbox (DVD): Method of display-  
ing a horizontally-long picture re-  
corded in 16:9 aspect ratio on a 4:3  
TV screen by attaching bands at the  
top and bottom of the screen and  
displaying the horizontally-long pic-  
ture at the center of screen.  
DTS : Digital surround system devel-  
Bitstream (DVD): This is the generic  
name given for the flow of data  
based on a standard such as Dolby  
Digital, DTS, MPEG, etc.  
oped by Digital Theater Systems, Inc.  
Packed PCM : The packed PCM  
(P.PCM) signal is obtained by com-  
pressing the linear PCM signal fea-  
turing large data amount and high  
sampling rate. With this compres-  
sion, the signal before compression  
can be restored perfectly.  
MPEG (Moving Picture Expert  
Group) (DVD, VCD): A digital  
video and audio compression and  
decompression system which is stan-  
dardized as an international stan-  
dard.  
Frame (DVD, VCD): Each frame of a  
moving picture, that is displayed 30  
times a second with NTSC and 25  
times a second with PAL. These TV  
formats reproduce moving pictures  
by displaying still pictures sequen-  
tially.  
Downmixing: Conversion of multi-  
channel audio signals of DVD or  
DTS-CD into 2-channel stereo sig-  
nals.  
Aspect ratio: The ratio between the  
horizontal and vertical sizes of pic-  
ture displayed on a TV screen. The  
aspect ratio of ordinary TV is 4:3, and  
that of widescreen TV is 16:9.  
Sampling rate: Sampling refers to con-  
verting an analog signal into digital  
signal by slicing the analog signal  
into fine parts at a certain time in-  
terval and digitizing every sliced part.  
The sampling rate is the count of slic-  
ing per second. The original sound  
can be reproduced more faithfully  
when the sampling rate is higher.  
Downconversion: Conversion of PCM  
signal with high sampling rate such  
as 96 kHz and 192 kHz into a signal  
with a sampling rate of 48 kHz or  
44.1 kHz.  
Field (DVD, VCD): Part of a frame  
obtained by diving the video data of  
each frame by two. Each frame of  
ordinary TV is constitute by display-  
ing the fields alternately.  
Pan & scan (DVD): Method of display-  
ing a horizontally-long picture re-  
corded in 16:9 aspect ratio on a 4:3  
TV screen by trimming part of picture.  
In general, the trimming positions  
for pan & scan are determined uni-  
formly by the reproducing device.  
However, the pan & scan of DVD al-  
lows the software producer to specify  
the trimming positions to be used  
in playback.  
Decoder: A device for restoring stan-  
dard audio signal from audio data  
recorded based on coding into DVD  
data, etc. This processing is referred  
to as decoding.  
Frame still/Field still (DVD, VCD):  
Types of still pictures obtained by  
temporarily stopping a moving pic-  
ture. The frame still picture may pro-  
duce blur in the picture because it  
displays two specific fields alter-  
nately, but the picture quality is  
higher. The field still picture has  
Quantization bit: The quantization bit  
count refers to the number used in  
digitizing the sliced parts obtained  
by slicing the analog signal as de-  
scribed above. The quantization bit  
count is the number of bits used in  
Dolby Digital: A digital audio compres-  
sion technology developed by Dolby  
Laboratories, Inc. It is compatible  
with 5.1-channel surround audio as  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
lower picture quality because it uses  
half the picture information of frame  
still, but is not accompanies with  
picture blur.  
Dynamic range: Difference between  
the minimum reproducible audio  
signal and maximum reproducible  
audio signal.  
IPB display (DVD): With the MPEG2  
which is one of the video display  
methods of DVD, each picture is di-  
vided into the following three pic-  
ture types before being coded in digi-  
tal signal.  
I-picture (in-frame coding): This  
is the standard video and can con-  
stitute a picture by itself. As the high-  
est picture quality can be obtained,  
the still image of I-picture is most  
suitable for use when adjusting the  
picture quality.  
P-picture (forward prediction  
coding): Picture calculated based on  
past pictures (I-picture or P-picture).  
B-picture (bidirectional predic-  
tion coding): Picture calculated by  
comparing the previous and next  
pictures (I-pictures or P-pictures).  
This picture type contains least  
amount of video information.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
DVF-R9030  
Index  
A
I
R
TV mode ............................................ 20  
TV monitor ........................................ 21  
viewing restriction............................ 18  
VISUAL .............................................. 34  
standby mode ......................................... 14  
accessories ..................................................3  
aspect ratio ...............................................20  
audio language ....................................... 35  
audio filter .............................................. 33  
IPB ............................................................24  
region code ................................................6  
J
S
joystick .................................................... 15  
joystick remote  
setting screen .......................................... 15  
IPB ..................................................... 24  
audio filter ........................................ 33  
audio language ................................. 35  
basic operation ................................. 15  
digital output .................................... 26  
MPEG ............................................ 28  
DTS ................................................ 27  
Dolby Digital ................................ 26  
PCM downconversion ................. 26  
disc menu language ......................... 34  
DVD video mode ............................. 22  
dynamic range control..................... 32  
FL mode ............................................ 37  
MAIN ................................................. 18  
on screen message ............................ 23  
OSD position.................................... 22  
player menu language ...................... 34  
SCART output select......................... 38  
search audio...................................... 32  
SOUND ............................................. 26  
speaker setting .................................. 28  
still mode .......................................... 36  
subtitle language .............................. 36  
TV aspect ratio .................................. 20  
T
B
installing the batteries ..................... 14  
control range .................................... 14  
TV aspect ratio .........................................20  
TV mode ...................................................20  
TV monitor .............................................. 21  
bitstream ..................................... 26, 27, 28  
C
L
connection  
language code ......................................... 40  
U
AV amplifier ................................ 12, 13  
stereo system................................ 10, 11  
TV.................................................. 10, 11  
N
unplayable disc ..........................................5  
NTSC ..........................................................8  
V
M
D
video formats .............................................8  
video monitor.......................................... 21  
viewing restriction .................................. 18  
VISUAL .................................................... 34  
MAIN ....................................................... 18  
maintenance ............................................ 41  
microcomputer resetting ..........................9  
delay time ................................................ 30  
digital output  
Dolby Digital ................................ 26  
DTS ................................................ 27  
MPEG ............................................ 28  
PCM downconversion ................. 26  
disc menu language ............................... 34  
DVD video mode.................................... 22  
dynamic range control ........................... 32  
O
on screen message .................................. 23  
OSD position .......................................... 22  
P
PAL..............................................................8  
PCM ......................................................... 26  
playable disc ..............................................5  
player menu language ............................ 34  
power supply .......................................... 14  
F
FL mode ...................................................37  
H
humidity ..................................................42  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Other Information  
Specifications  
Format section  
Video Section  
General Section  
Format ............................. DVD audio ver. 1.2 / DVD video ver.1.1  
Composite video output level ................................... 1 Vp-p (75 Ω)  
S-video output level  
[DV-4900, DVF-R9030]  
Laser  
............................................................. Semiconductor laser  
Power consumption ................................................................. 35 W  
Dimensions ............................................... W : 474 mm (18-11/16”)  
..................................................... H : 127 mm (5”)  
Video output format ......................................................... NTSC/PAL  
(Y-signal) .............................................................. 1 Vp-p (75 Ω)  
(C-signal) ...................................................... 0.286 Vp-p (75 Ω)  
Component video output level  
Audio section  
Frequency response  
..................................................... D : 410 mm (16-1/8”)  
(Y-signal) .............................................................. 1 Vp-p (75 Ω)  
(Cb-signal) ........................................................ 0.7 Vp-p (75 Ω)  
(Cr-signal) ......................................................... 0.7 Vp-p (75 Ω)  
RGB output level (SCART) ...................................... 0.7 Vp-p (75 Ω)  
Video signal to noise ratio ....................................................... 65 dB  
Horizontal resolution......................................................... 500 lines  
Sampling frequency: 44.1kHz (CD only) ........... 4 Hz~20 kHz  
Sampling frequency: 48 kHz ............................... 4 Hz~22 kHz  
Sampling frequency: 96 kHz ............................... 4 Hz~44 kHz  
Sampling frequency: 192 kHz (DVD AUDIO only)  
Weight (net) .............................................................. 7.4 kg (16.3 lb)  
[DV-4070, DVF-R7030]  
Power consumption ................................................................. 35 W  
Dimensions ............................................... W : 440 mm (17-5/16”)  
..................................................... H : 127 mm (5”)  
........................................................................ 4 Hz~88 kHz  
Signal to noise ratio............................................. More than 120 dB  
Dynamic range ..................................................... More than 100 dB  
Total harmonic distortion ................... Less than 0.0025 % (1kHz)  
Channel separation .................................. More than 95 dB (1kHz)  
Analog output level/impedance  
..................................................... D : 410 mm (16-1/8”)  
Laser Section  
Wavelength .................................................................... 660~676 nm  
Weight (net) .............................................................. 6.3 kg (13.9 lb)  
Laser power class............................................................ class 2 (IEC)  
MIX LINE OUTPUT ................................................... 2 V/ 510 Ω  
6 CH. OUTPUT ........................................................ 2 V / 510 Ω  
Digital output level/impedance  
COAXIAL ............................................................ 0.5 Vp-p/ 75 Ω  
OPTICAL (Wave length 660 nm) ............... -21 dBm ~ -15 dBm  
Headphone output ........... 30 mW/ 32 Ω load (Phones level MAX)  
KENWOOD follows a policy of continuous  
advancements in development. For this reason  
specifications may be changed without notice.  
Sufficient performance may not be exhibited at  
extremely cold locations (Where water freezes).  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MEMORANDUM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For your records  
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in  
the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for  
information or service on this product.  
Model ............................. Serial Number .............................  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Automobile Parts 650891 X47 B User Manual
Ingersoll Rand Water Pump PD03P XXX XXX User Manual
JAI Security Camera CV A1 20 User Manual
Jensen Car Speaker JS692 User Manual
Jet Tools Dust Collector DC 1100RC User Manual
Jura Capresso Coffeemaker IMPRESSA S70 User Manual
JVC CRT Television GGT0010 001A E User Manual
JVC DVD Player XV S200 User Manual
Kenwood Cassette Player KRC 609 User Manual
Kenwood Speaker System VR61 User Manual