Kenwood Car Stereo System DPX 8030MD User Manual

DOUBLE DIN SIZE CD/MP3/WMA/MD/DSP RECEIVER  
DPX-8030MD  
INSTRUCTION MANUAL  
COMPACT  
DIGITAL AUDIO  
©B64-2329-00/00 (MW)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
IMPORTANT INFORMATION  
About the disc changer to be  
connected:  
To connect a disc changer having the "O-N"  
switch to this unit, set the "O-N" switch to "N".  
Note that none of the KDC-C100, KDC-C302,  
C205, C705, and non-Kenwood CD changers  
can be connected.  
You can damage both your unit and the CD  
changer if you connect them incorrectly.  
Precautions when connecting disc changers  
released in 1997 or earlier.  
If a model with no "O-N" switch is  
connected, some unavailable functions and  
information that cannot be displayed are  
generated.  
2WARNING  
2CAUTION  
To prevent injury or fire, take the  
following precautions:  
• Insert the unit all the way in until it is fully  
locked in place. Otherwise it may fall out of  
place when jolted.  
• When extending the ignition, battery, or  
ground wires, make sure to use automotive-  
grade wires or other wires with a 0.75mm2  
(AWG18) or more to prevent wire  
deterioration and damage to the wire  
coating.  
To prevent a short circuit, never put or leave  
any metallic objects (such as coins or metal  
tools) inside the unit.  
• If the unit starts to emit smoke or strange  
smells, turn off the power immediately and  
consult your Kenwood dealer.  
• Make sure not to get your fingers caught  
between the faceplate and the unit.  
• Be careful not to drop the unit or subject it to  
strong shock.  
The unit may break or crack because it  
contains glass parts.  
To prevent damage to the machine,  
take the following precautions:  
• Make sure to ground the unit to a negative  
12V DC power supply.  
• Do not open the top or bottom covers of the  
unit.  
• Do not install the unit in a spot exposed to  
direct sunlight or excessive heat or humidity.  
Also avoid places with too much dust or the  
possibility of water splashing.  
• Do not subject the faceplate to excessive  
shock, as it is a piece of precision  
equipment.  
• When replacing a fuse, only use a new one  
with the prescribed rating. Using a fuse with  
the wrong rating may cause your unit to  
malfunction.  
To prevent a short circuit when replacing a  
fuse, first disconnect the wiring harness.  
• Do not place any object between the  
faceplate and the unit.  
• Do not use your own screws. Use only the  
screws provided. If you use the wrong  
screws, you could damage the unit.  
The marking of products using lasers  
(Except for some areas)  
CLASS 1  
LASER PRODUCT  
The label is attached to the chassis/case and  
says that the component uses laser beams  
that have been classified as Class 1. It  
means that the unit is utilizing laser beams  
that are of a weaker class. There is no  
danger of hazardous radiation outside the  
unit.  
• Do not apply excessive force to the moving  
faceplate. Doing so will cause damage or  
malfunction.  
• Do not apply excessive force to the open  
faceplate or place objects on it. Doing so will  
cause damage or breakdown.  
Do Not Load 3-in. CDs in the CD slot  
If you try to load a 3 in. CD with its adapter  
into the unit, the adapter might separate from  
the CD and damage the unit.  
— 3 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Safety precautions  
Lens Fogging  
Cleaning the CD Slot  
As dust tends to accumulate in the CD slot,  
clean it every once in a while. Your CDs can get  
scratched if you put them in a dusty CD slot.  
NOTE  
Right after you turn on the car heater in cold  
weather, dew or condensation may form on  
the lens in the CD player of the unit. Called  
lens fogging, CDs may be impossible to play.  
In such a situation, remove the disc and wait  
for the condensation to evaporate. If the unit  
still does not operate normally after a while,  
consult your Kenwood dealer.  
• If you experience problems during  
installation, consult your Kenwood dealer.  
• If the unit fails to operate properly, press the  
Reset button. The unit returns to factory  
settings when the Reset button is pressed.  
If the unit still fails to operate properly after  
the Reset button has been pressed, contact  
your local KENWOOD dealer for assistance.  
• Press the reset button if the disc auto  
changer fails to operate correctly. Normal  
operation should be restored.  
Cleaning the Unit  
If the faceplate of this unit is stained, wipe it  
with a dry soft cloth such as a silicon cloth.  
If the faceplate is stained badly, wipe the stain  
off with a cloth moistened with neutral  
cleaner, then wipe neutral detergent off.  
Applying spray cleaner directly to the unit may  
affect its mechanical parts. Wiping the  
faceplate with a hard cloth or using a volatile  
liquid such as thinner or alcohol may scratch  
the surface or erases characters.  
Reset button  
• We recommend the use of the Security  
Code function (see p. 30) to prevent theft.  
• The illustrations of the display and the panel  
appearing in this manual are examples used  
to explain more clearly how the controls are  
used. Therefore, what appears on the display  
in the illustrations may differ from what  
appears on the display on the actual  
equipment, and some of the illustrations on  
the display may represent something  
impossible in actual operation.  
— 4 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About CDs  
Handling CDs  
• Don’t touch the recording surface of the CD.  
CD cleaning  
Clean from the center of the disc and move  
outward.  
CD storage  
• Don’t place them in direct sunlight (On the  
seat or dashboard etc.) and where the  
temperature is high.  
• Store CDs in their cases.  
Removing CDs  
When removing CDs from this unit pull them  
out horizontally.  
• CD-R and CD-RW are easier to damage than  
a normal music CD. Use a CD-R or a CD-RW  
after reading the caution items on the  
package etc.  
• Don’t stick tape etc. on the CD.  
Also, don’t use a CD with tape stuck on it.  
CDs that can’t be used  
• CDs that aren’t round can’t be used.  
When using a new CD  
If the CD center hole or outside rim has burrs,  
use it after removing them with a ball pen etc.  
• CDs with coloring on the recording surface  
or that are dirty can’t be used.  
• Don’t use CDs without disc mark  
.
Burrs  
• A CD-R or CD-RW that hasn’t been finalized  
can’t be played. (For the finalization process  
refer to your CD-R/CD-RW writing software,  
and your CD-R/CD-RW recorder instruction  
manual.)  
Burrs  
CD accessories  
Don’t use disc type accessories.  
— 5 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on playing MP3/WMA  
This unit can play MP3(MPEG1, 2, 2.5 Audio Layer 3)/WMA. Note,  
however, that the MP3/WMA recording media and formats  
acceptable are limited. When writing MP3/WMA, pay attention to  
the following restrictions.  
Entering ID3 tag and Contents  
Description  
The Displayable ID3 tag is ID3 version  
1.x.  
The right table shows the characters  
that can be displayed in this unit.  
Acceptable media  
The MP3/WMA recording media acceptable to this unit are CD-ROM,  
CD-R, and CD-RW.  
When using CD-RW, do full format not quick format to prevent  
malfunction.  
Entering file and folder names  
The code list characters are the only file  
Acceptable medium formats  
names and folder names that can be  
entered and displayed.  
If you use any other character for entry,  
the file and folder names are not displayed correctly. They may neither  
be displayed correctly depending on the CD writer used.  
The unit recognizes and plays only those MP3/WMA which have the  
MP3/WMA extension (.MP3/.WMA).  
The following formats are available for the media used in this unit. The  
maximum number of characters used for file name including the  
delimiter (".") and three-character extension are indicated in  
parentheses.  
• ISO 9660 Level 1 (12 characters)  
• ISO 9660 Level 2 (31 characters)  
• Joliet (64 characters)  
• Romeo (128 characters)  
A file with a name entered with characters not on the code list may not  
play correctly.  
Up to 200 characters can be displayed in the long file name format.  
For a list of available characters, see the instruction manual of the  
writing software and the section Entering file and folder names below.  
The media reproducible on this unit has the following limitations:  
• Maximum number of directory levels: 8  
• Maximum number of files per folder: 255  
• Maximum number of characters for folder name: 64  
• Maximum number of folders: 50  
Writing files into a medium  
When a medium containing MP3/WMA data is loaded, the unit checks  
all the data on the medium. If the medium contains a lot of folders or  
non-MP3/WMA files, therefore, it takes a long time until the unit starts  
playing MP3/WMA.  
In addition, it may take time for the unit to move to the next  
MP3/WMA file or a File Search or Folder Search may not be performed  
smoothly.  
MP3/WMA written in the formats other than the above may not be  
successfully played and their file names or folder names are not  
properly displayed.  
Loading such a medium may produce loud noise to damage the speakers.  
• Do no attempt to play a medium containing a non-MP3/WMA file  
with the MP3/WMA extension.  
The unit mistakes non-MP3/WMA files for MP3/WMA data as long as  
they have the MP3/WMA extension.  
Settings for your MP3/WMA encoder and CD writer  
Do the following setting when compressing audio data in WMA data  
with the WMA encoder.  
• Do not attempt to play a medium containing non MP3/WMA.  
Transfer bit rate: 64k —192 kbps  
• Sampling frequency: 32k, 44.1k 48k Hz  
When you use your CD writer to record MP3/WMA up to the  
maximum disc capacity, disable additional writing. For recording on an  
empty disc up to the maximum capacity at once, check Disc at Once.  
— 6 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3/WMA playing order  
When a File Search is executed with file ¡$ being played ...  
When selected for play, Folder Search, File Search, or for Folder  
Select, files and folders are accessed in the order in which they were  
written by the CD writer.  
Operation of the button  
¢ Button  
Current  
file number  
4 Button  
Beginning of file  
Because of this, the order in which they are expected to be played  
may not match the order in which they are actually played. You may be  
able to set the order in which MP3/WMA are to be played by writing  
them onto a medium such as a CD-R with their file names beginning  
with play sequence numbers such as "01" to "99", depending on your  
CD writer.  
When an Folder Search is executed with file ¡$ being played ...  
Operation of the button  
Current  
folder number  
AM Button  
FM Button  
For example, a medium with the following folder/ file hierarchy is  
subject to Folder Search, File Search, or Folder Select as shown below.  
Example of a medium's folder/file hierarchy  
When Folder Select is selected with file ¡$ being played to move  
from folder to folder ...  
Operation of the button  
Current  
folder number  
4 Button  
¢ Button  
AM Button  
FM Button  
Folder  
File  
Root  
Level 1  
Level 3  
Level 2  
Level 4  
— 7 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on playing MD Group  
This unit is equipped with the group management function that  
enables quick search for a track you want to listen from the  
grouped MDs (MDs with group registration thereafter).  
(Refer to the instruction manual of home audio equipped with the  
group function or another equipment for the creation of MD.)  
When a Track Search is executed with track ¡6 being played ...  
Operation of the button  
¢ Button  
Current  
Track number  
4 Button  
Beginning of track  
6
The maximum number of playable groups  
This unit can play up to the 50th group.  
This unit cannot play the 51st group.  
5
4
7
0
!
6
When an Group Search is executed with track ¡0 being played ...  
The order of playing tracks with group registration  
If Track Search, Group Search or Group Select is selected for a disc  
created with group in the following:  
(The group management function is enabled to use when <MD group  
setting> of <Function Setting System> (page 30) is ON.)  
Operation of the button  
Current  
Group number  
AM Button  
FM Button  
Group 3  
Group 2  
Group 1  
Group 4 Group 1  
• If <MD group setting> is ON, tracks without group registration cannot be  
played.  
If <MD group setting> is OFF, tracks without group registration can be  
played.  
• If no track is registered in a group, select the next group in Group  
Search or Group Select, but do not select any group where no track is  
registered.  
When Group Select is selected with track ¡0 being played ...  
Operation of the button  
Current  
Group number  
AM Button  
FM Button  
Group 3  
Group 4  
Group 2  
Group 1  
Group 1  
Group 2  
Group 3  
Group 4 Group 5  
!
@
3
4
5
6
7
8
9
0
#
$
%
1
2
Not-registered group  
Track  
Tracks without group registration  
— 8 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About MDs  
• Do not leave the MD in a place exposed to  
direct sunlight (such as on a dashboard) or in  
other places that attain high temperatures.  
The MD cartridge will become misshapen  
and will no longer be usable.  
• MDs designed for use with data cannot be  
used. Please use MDs designed for music.  
Handling Mini discs  
• The MD shutter is designed so that it cannot  
be opened. If forced open, the cartridge will  
be damaged and use of the MD will no  
longer be possible. If the shutter has been  
opened due to some cause, be careful not  
to touch the recording portion with a finger.  
Doing so will cause the sound to skip.  
• Do not use lens cleaners. Doing so will lead  
to breakdown.  
• Do not use an MD that has a peeling label.  
Use of an MD that has a loose or peeling  
label may cause problems, such as the label  
coming off inside the player and the  
resultant inability to eject the MD.  
• Wipe away dirt or dust from the cartridge  
surface with a dry cloth before use. Using  
an oil-soiled cartridge in particular may result  
in the disc not loading or being unable to  
eject it. (At time of cleaning, be careful not  
to open the shutter.)  
• Do not leave the MD in the unit for a  
prolonged period. The ejected MD should be  
placed in an MD case for storage.  
US and foreign patents licensed from  
Dolby Laboratories.  
— 9 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General features  
Power  
EQ/  
AUD/X'Over  
Volume  
Control  
S.A/  
CLK  
4
DSP  
¢
Turning ON the Power  
Press the [SRC] button.  
Turning OFF the Power  
Press the [SRC] button for at least 1 second.  
Volume  
Increasing Volume  
Turn the [Volume Control] knob clockwise.  
Decreasing Volume  
Turn the [Volume Control] knob counterclockwise.  
DISP/  
NAME  
/
#1 - #3  
SRC  
ATT  
AM  
ANG  
FM  
DEMO  
Attenuator  
Turning the volume down quickly.  
Press the [ATT] button.  
Each time the button is pressed the Attenuator turns ON or OFF.  
When it’s ON, "ATT On" is displayed.  
— 10 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the Source  
Clock Display  
Press the [SRC] button.  
Source required  
Press the [CLK] button for at least 1 second.  
Each time the button is pressed for at least 1 second the clock  
display turns ON or OFF.  
Display  
Tuner  
"TUNER"  
MD  
"Mini Disc"  
CD  
"Compact Disc"  
External disc  
Auxiliary input  
External TV  
"CD Changer"/"MD Changer"  
"AUX"  
"TV"  
Adjusting Clock  
Standby (Illumination only mode) "ALL OFF"  
1 Enter Standby  
Press the [SRC] button.  
Select the "ALL OFF" display.  
• When a medium containing MP3/WMA is inserted, an MP3/WMA  
file can be played by selecting CD source ("Compact Disc").  
• AUX mode is only available when "AUX" is turned ON in the  
Function setting (page 31).  
• "AUX"/"AUX1" is displayed in the Auxiliary input source at the initial  
state but can be changed in <Auxiliary Input Name Setting> (page  
15).  
2 Enter clock adjustment mode  
Press the [DISP] button for at least 2 seconds.  
"CLOCK ADJUST" is displayed.  
3 Adjust the hours  
• If AUX has two sources with the optional accessories (to be  
separately purchased), select the AUX source as shown below:  
Press the [FM] or [AM] button.  
Adjust the minutes  
Press the [4] or [¢] button.  
Select AUX source from  
Display (after being selected)  
This unit  
"AUX"  
KCA-S210A  
CA-C1AX  
CD changer having AUX input  
"AUX1"  
4 Exit clock adjustment mode  
"Disc Changer" ("AUX Mode")  
"CD Changer2" ("AUX Mode")  
Press the [DISP] button.  
Demonstration  
Turning the Demonstration ON or OFF.  
Press the [DEMO] button for at least 2 seconds.  
Each time the button is pressed for at least 2 seconds the  
Demonstration turns ON or OFF.  
When it’s ON, "DEMO ON" is displayed.  
— 11 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General features  
For Disc name registration refer to <Station/Disc Naming  
(SNPS/DNPS )> (page 14).  
Display Mode Switching  
Switching the display mode.  
Press the [DISP] button.  
The Reference for the display content is after this operation's  
explanation.  
The each screen graphic can be changed.  
- Full Screen Graphic Switching: page 13  
- Half Screen Graphic Switching: page 14  
In MP3/WMA source  
Information  
Display  
Full screen graphic + Track time  
"P-Time"  
Half screen graphic + Folder name  
+ Track time  
"Folder Name"  
Half screen graphic + File name  
+ Track time  
Half screen graphic  
+ Song title & Artist name + Track time  
Song title & Artist name  
+ Album name + Track time  
Folder name + File name + Track time  
"File Name"  
"Title"  
In Tuner source  
Information  
Display  
Full screen graphic + Frequency  
Half screen graphic + Station name  
+ Frequency  
"SNPS"  
"Title"  
"Album"  
"Folder Name"  
"File Name"  
"Title"  
Full screen graphic  
For Station name registration refer to <Station/Disc Naming  
(SNPS/DNPS)> (page 14).  
Song title & Artist name  
+ Folder name + Track time  
"Folder Name"  
Full screen graphic  
The Album name cannot be displayed during WMA play.  
In CD source  
Information  
Display  
Full screen graphic + Track time  
Full screen graphic + Total time  
"P-Time"  
"A-Time"  
Half screen graphic + Disc name + Track time  
Half screen graphic + Disc title + Track time  
Half screen graphic + Track title + Track time  
Disc title + Track title + Track time  
"DNPS"  
"Disc Title"  
"Track Title"  
"Disc Title"  
"Track Title"  
Full screen graphic  
— 12 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Full Screen Graphic Switching  
Switching the full screen graphic.  
In MD source  
Information  
Display  
Full screen graphic + Track time  
Half screen graphic + Disc title  
+ Track time  
"P-Time"  
"Disc Title"  
1 Select the full screen graphic  
Press the [DISP] button.  
Refer to <Display Mode Switching> (page 12).  
Half screen graphic + Group title  
+ Track time*  
Half screen graphic + Track title  
+ Track time  
"Group Title"  
"Track Title"  
2 Switch the graphic  
Press the [S.A] button.  
Each time the button is pressed the full screen graphic switches  
as shown below.  
Disc title + Track title + Track time  
"Disc Title"  
"Track Title"  
Screen Graphic  
Display  
Group title + Track title + Track time* "Group Title"  
"Track Title"  
Full screen graphic  
Spectrum Analyzer Scan  
(The items from Movie 1 to Equalizer  
Curve are displayed in sequence.)  
"Speana Scan"  
Movie 1  
Movie 2  
"Virtual Cruising"  
"Deep Marine Movie"  
"Peak Hold"  
* Selectable only when an MD with group registration is played.  
Spectrum Analyzer 1  
Spectrum Analyzer 2  
Spectrum Analyzer 3  
Spectrum Analyzer 4  
Spectrum Analyzer 5  
Spectrum Analyzer 6  
Spectrum Analyzer 7  
Equalizer Curve  
"Plate Falls"  
"Square Glass"  
"Heart Breeze"  
"Crystal Explosion"  
"Cipher"  
"Megaplant"  
"EQ Curve"  
In Auxiliary input source  
Information  
Display  
Full screen graphic + Auxiliary input display  
Half screen graphic + Auxiliary input display  
Full screen graphic  
"AUX"  
The display may differ from the above depending on the Auxiliary  
input source that has been input into CA-C1AX/ CD changer having  
AUX input.  
Movies only are switched in the Standby mode.  
In Standby mode  
Information  
Display  
Full screen graphic + "ALL OFF"  
Half screen graphic + "ALL OFF"  
Full screen graphic  
"ALL OFF"  
"ALL OFF"  
— 13 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General features  
4 Select the character type  
Half Screen Graphic Switching  
Switching the half screen graphic.  
Press the [38] button.  
Each time the button is pressed the character type switches as  
shown below.  
1 Select the half screen graphic  
Press the [DISP] button.  
Character type  
Display  
Refer to <Display Mode Switching> (page 12).  
Alphabet upper case  
Alphabet lower case  
Numbers and symbols  
"A"  
"a"  
2 Switch the graphic  
" "  
Press the [S.A] button.  
*
Each time the button is pressed the half screen graphic switches  
as shown below.  
5 Select the characters  
Press the [FM] or [AM] button.  
Screen Graphic  
Characters can be entered by using a remote with a number  
buttons.  
Example: If "DANCE" is entered.  
Graphic 1  
Graphic 2  
Graphic 3  
Character  
Button  
#Times pressed  
"D"  
"A"  
"N"  
"C"  
"E"  
[#3]  
[#2]  
[#6]  
[#2]  
[#3]  
1
1
2
3
2
The half screen graphic cannot be switched in the Standby mode.  
6 Repeat steps 3 through 5 and enter the name.  
Station/Disc Naming (SNPS/DNPS)  
Attaching a title to a Station or CD.  
7 Exit name set mode  
Press the [NAME] button.  
• When operation stops for 10 seconds the name at that time is  
registered, and Name Set mode closes.  
• At registration, up to 12 characters can be entered into each  
name.  
1 Receive/play the station/disc you want to attach a title to  
• A title can't be attached to MD and MP3/WMA media.  
• Disc Naming is unavailable when Magazine Random Play is  
performed.  
• Memory numbers  
2 Enter name set mode  
- Total number of FM and AM stations: 30 stations  
- 50 disc names can be registered in internal CD player and  
external CD changer.  
• The title of station/CD can be changed by the same operation  
used to name it.  
Press the [NAME] button for at least 2 seconds.  
"Name Set" is displayed.  
3 Move the cursor to the enter character position  
Press the [4] or [¢] button.  
• If this unit is removed from the battery, DNPS/SNPS is erased.  
— 14 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auxiliary Input Name Setting  
Balance/ Fader Control  
Selecting the display when this device is switched to Auxiliary  
input source.  
1 Enter Audio Control mode  
Press the [AUD/X’Over] button for at least 1 second.  
"AUDIO CONTROL MODE" is displayed.  
1 Select Auxiliary input source  
Press the [SRC] button.  
Select the "AUX"/"AUX1" display.  
2 Select the Balance/ Fader Control mode  
Press the [AUD/X’Over] button.  
Select the "BAL/FAD" display.  
Each time the button is pressed the Audio control, the X’Over  
control and the Amp control switch.  
2 Enter Auxiliary input name setting mode  
Press the [NAME] button for at least 2 seconds.  
"Name Set" is displayed.  
3 Adjust the Balance  
3 Select the Auxiliary input name  
Press the [4] or [¢] button.  
Press the [4] or [¢] button.  
Each time the button is pressed it switches through the below  
displays.  
• "AUX"  
Adjust the Fader  
Press the [FM] or [AM] button.  
Each time the button is pressed the items that can be adjusted  
switch as shown below.  
• "TV"  
• "VIDEO"  
• "GAME"  
• "PORTABLE"  
• "DVD"  
Adjustment Item  
Display  
Range  
Balance  
Fader  
"Balance"  
"Fader"  
Left 15 — Right 15  
Rear 15 — Front 15  
4 Exit Audio Control mode mode  
Press the [AUD/X’Over] button for at least 1 second.  
4 Exit Auxiliary input name setting mode  
Press the [NAME] button.  
• When operation stops for 10 seconds, the name at that time is  
selected, and Auxiliary input name setting mode closes.  
• Auxiliary input name setting cannot be applied to the optional  
Auxiliary input sources shown below.  
- CA-C1AX  
- CD changer with an Auxiliary input function installed.  
• If this unit is removed from the battery, the Auxiliary input name is  
returned to "AUX".  
— 15 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General features  
Amp control mode:  
Adjustment Item  
Bass boost level  
X’Over & Amp Control  
Display  
Range  
1 Enter Audio Control mode  
"Amp Bass" Flat/+6/ +12/ +18 (dB)  
Press the [AUD/X’Over] button for at least 1 second.  
"AUDIO CONTROL MODE" is displayed.  
Central frequency boost "Amp Freq" Normal/ Low  
• * This mode is available only when <Switching preout> (page 30)  
is set on "N-F".  
• Refer to the catalog or instruction manual for power amplifiers that  
can be controlled from this unit.  
• For amplifiers there are the model that can be set from Flat to +18  
dB, and the model that can be set from Flat to +12 dB.  
When an amplifier that can only be set to +12 is connected to the  
unit, "Amp Bass +18" won't work correctly even if it's selected.  
2 Select the X’Over or Amp Control mode  
Press the [AUD/X’Over] button.  
Select the "X’OVER CONTROL" (X’Over Control mode) or "AMP  
CONTROL" (Amp Control mode) display.  
Each time the button is pressed the Audio control, the X’Over  
control and the Amp control switch.  
3 Select the X’Over & Amp Control item for adjustment  
Press the [FM] or [AM] button.  
Each time the button is pressed the items that can be adjusted  
switch as shown below.  
X’Over Preset Memory  
4 Adjust the Audio item  
You can store into or recall from memory up to three X’Over  
settings.  
Press the [4] or [¢] button.  
5 Exit Audio Control mode  
1 Adjust the X’Over to put in the memory  
Press the [AUD/X’Over] button for at least 1 second.  
Refer to <X’Over & Amp Control> (page 16).  
X'Over control mode  
2 Put the X’Over setting in the memory  
Press the [#1] — [#3] button for at least 2 seconds.  
The preset number display blinks 1 time.  
Adjustment Item  
Display  
Range  
Front High Pass Filter "HPF-Front" Off/ 40/ 60/ 80/ 100/ 120/  
150/ 180/ 220 (Hz)  
3 Exit Audio Control mode  
Rear High Pass Filter  
"HPF-Rear"  
Off/ 40/ 60/ 80/ 100/ 120/  
150/ 180/ 220 (Hz)  
Press the [AUD/X’Over] button for at least 1 second.  
Low Pass Filter*  
Non-Fading level*  
Non-Fading Phase*  
"LPF"  
"N-F Level"  
"N-F Phase" Normal (0°)/Reverse (180°)  
50/ 80/ 120/ Off (Hz)  
- - - — +10  
Recalling the X’Over setting  
1 Enter X’Over Control mode  
Refer to <X’Over & Amp Control> (page 16).  
2 Call up the X’Over setting  
Press the [#1] [#3] button.  
3 Exit Audio Control mode  
Press the [AUD/X’Over] button for at least 1 second.  
— 16 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting  
Display  
Non-Fading level cannot be preset into the memory.  
Stadium  
"STADIUM"  
"CONCERT"  
"CLUB DISCO"  
"CHURCH"  
"LISTENING"  
"BYPASS"  
Concert Hall  
Club Disco  
Church  
Listening  
Bypass  
DSP(Digital Signal Processor) System  
Turning the DSP effects ON or OFF.  
A DSP is a device which uses digital control to correct the audio  
signal and produce sound effects that can compensate for the  
small passenger compartment of a vehicle.  
When operation stops for 10 seconds, the Sound Field Setting  
closes.  
Turn DSP System ON  
Preset Equalizer Curve Selection  
Press the [DSP] button.  
"DSP CONTROL MODE" is displayed.  
Recall the preset equalizer curve classified in groups.  
Turn DSP System OFF  
1 Enter the Equalizer control mode  
Press the [EQ] button.  
"EQ CONTROL MODE" is displayed.  
Press the [DSP] button for at least 1 second.  
"DSP OFF" is displayed.  
2 Select an equalizer curve  
Press the [EQ] button.  
Each time the button is pressed the preset equalizer curve  
Sound Field Setting  
This function reproduces many different virtual sound fields.  
switches.  
1 Enter the DSP control mode  
Press the [DSP] button.  
"DSP CONTROL MODE" is displayed.  
Setting  
Display  
Flat  
"Flat"  
Rock  
Pops  
Dance  
Vocal  
"Rock"  
"Pops"  
"Dance"  
"Vocal"  
2 Selecting the sound field setting  
Press the [DSP] button.  
Each time the button is pressed the sound field setting switches  
as shown below.  
When Equalizer Curve is adjusted, the selection starts from "User".  
Ending of Equalizer control mode  
Press the [EQ] button for at least 1 second.  
When operation stops for 10 seconds, the Equalizer control  
mode closes.  
— 17 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General features  
Recalling the equalizer curve  
Equalizer Curve Adjustment  
1 Enter the Equalizer control mode  
Press the [EQ] button.  
"EQ CONTROL MODE" is displayed.  
You can create your own equalizer curves.  
1 Enter the Equalizer control mode  
Press the [EQ] button.  
"EQ CONTROL MODE" is displayed.  
2 Call up the equalizer curve  
Press the [#1] [#3] button.  
2 Select the frequency  
Press the [4] or [¢] button.  
Item  
Setting  
Frequency  
"60Hz" "16kHz"  
The number of steps  
7 bands  
Faceplate Angle Adjustment  
3 Adjust the level  
You can adjust the faceplate angle for easy viewing.  
Press the [FM] or [AM] button.  
Slide the faceplate  
Item  
Setting  
Press the [ANG] button.  
Each time the button is pressed the faceplate is slid by one step.  
Level  
The number of steps  
"-12" "+12" (dB)  
13 steps  
Return the faceplate to the original position  
4 Ending the Equalizer control mode  
Press the [ANG] button for at least 1 second.  
Press the [EQ] button for at least 1 second.  
When operation stops for 10 seconds, the Equalizer control  
mode closes.  
• Do not apply excessive force to the faceplate. It can cause  
damage.  
• During the process of sliding of the panel, FM/AM station sound is  
suppressed.  
Equalizer Curve Preset Memory  
You can store into or recall from memory up to three equalizer  
curves.  
1 Create an equalizer curve to put in the memory  
Refer to <Equalizer Curve Adjustment> (page 18).  
2 Put the equalizer curve in the memory  
Press the [#1] — [#3] button for at least 2 seconds.  
The preset number display blinks 1 time.  
— 18 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner features  
Tuning  
Selecting the station.  
4
FNC  
¢
#1 - #6  
1 Select tuner source  
Press the [SRC] button.  
Select the "TUNER" display.  
2 Select the band  
Press the [FM] or [AM] button.  
Each time the [FM] button is pressed it switches between the  
FM1, FM2, and FM3 bands.  
3 Tune up or down band  
Press the [4] or [¢] button.  
During reception of stereo stations the "ST" indicator is ON.  
CRSC  
SRC  
AM  
FM  
Direct Access Tuning (Function of remote)  
Entering the frequency and tuning.  
1 Select the band  
Frequency display  
Press the [FM] or [AM] button.  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote.  
"– – – –" is displayed.  
3 Enter the frequency  
Press the number buttons on the remote.  
Example:  
Desired frequency  
Press button  
ST indicator  
Station name  
92.1 MHz (FM)  
810 kHz (AM)  
[#9], [#2], [#1]  
[#8], [#1], [#0]  
Canceling Direct Access Tuning  
Press the [DIRECT] button on the remote.  
— 19 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner features  
Station Preset Memory  
Preset Tuning  
Putting the station in the memory.  
Calling up the stations in the memory.  
1 Select the band  
1 Select the band  
Press the [FM] or [AM] button.  
Press the [FM] or [AM] button.  
2 Select the frequency to put in the memory  
2 Call up the station  
Press the [4] or [¢] button.  
Press the [#1] [#6] button.  
3 Put the frequency in the memory  
Press the [#1] — [#6] button for at least 2 seconds.  
The preset number display blinks 1 time.  
On each band, 1 station can be put in the memory on each [#1]  
— [#6] button.  
CRSC (Clean Reception System Circuit)  
Temporarily have reception switched from stereo to mono to  
reduce multi-path noise when listening to the FM station.  
Press the [CRSC] button for at least 1 second.  
Each time the button is pressed CRSC turns ON or OFF.  
When it's ON, "CRSC ON" is displayed.  
Auto Memory Entry  
Putting a station with good reception in the memory  
automatically.  
1 Select the band for Auto Memory Entry  
Press the [FM] or [AM] button.  
2 Enter Function Setting mode  
Press the [FNC] button for at least 1 second.  
"FUNCTION SET" is displayed.  
3 Select the Auto Memory Entry mode  
Press the [FM] or [AM] button.  
Select the "AME Ready" display.  
4 Open Auto Memory Entry  
Press the [38] button for at least 2 seconds.  
When 6 stations that can be received are put in the memory  
Auto Memory Entry closes.  
— 20 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MD/MP3/WMA/External disc control  
features  
RDM/  
Frequency Step Setting  
Changing the tuning frequency step.  
G.RDM/  
4
CD  
MD  
SCRL SCN  
REP SEL M.RDM  
¢
#3  
The original setting is FM band 50 kHz, and AM band 9 kHz.  
1 Turn the power OFF  
Press the [SRC] button for at least 1 second.  
2 Switch the frequency step  
While pressing the [#1] and [#5] button, press the [SRC]  
button.  
The frequency step changes to FM band 200 kHz, and AM band  
10 kHz.  
• When the same operation is repeated, it returns to the original  
setting.  
• When the frequency step is switched, the frequencies in the  
memory are deleted.  
SRC  
AM  
FM  
indicator  
indicator  
Track title/ Disc title  
Folder name/ File name/ MP3/WMA text  
MD Group title  
— 21 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MD/MP3/WMA/External disc control features  
Playing CD & MP3/WMA  
Playing MD  
When there is no disc inserted  
When an MD isn't inserted  
1 Slide open the faceplate  
1 Slide open the faceplate  
Press the [0CD] button.  
Press the [0MD] button.  
2 Insert a disc.  
2 Insert an MD.  
When the faceplate has been slid open, it might interfere with the  
shift lever or something else. If this happens, pay attention to safety  
and move the shift lever or take an appropriate action, then operate  
the unit.  
When the faceplate has been slid open, it might interfere with the  
shift lever or something else. If this happens, pay attention to safety  
and move the shift lever or take an appropriate action, then operate  
the unit.  
• When an MD is inserted, the  
indicator is ON.  
When a disc is inserted the  
indicator is ON.  
• The MDs recorded in MDLP mode can also be played.  
When an MD is played in the LP2 mode, the "LP2" indicator is  
turned ON.  
When an MD is played in the LP4 mode, the "LP4" indicator is  
turned ON.  
• This unit equipped with the group management function enables  
quick search for a track you want to listen to with the search  
function for MDs with group registration.  
When a disc is inserted  
Press the [SRC] button.  
Select the "Compact Disc" display.  
Pause and play  
Press the [38] button.  
Each time the button is pressed the song pauses or plays.  
Eject the disc  
When an MD is inserted  
Press the [SRC] button.  
Select the "Mini Disc" display.  
1 Eject the disc  
Press the [0CD] button.  
Pause and play  
2 Close the faceplate  
Press the [38] button.  
Each time the button is pressed the MD pauses and plays.  
Press the [0CD] button.  
3 in. (8cm) disc can't be played. Using an adapter and inserting them  
into this unit can cause damage.  
Eject the MD  
The MP3/WMA media that this unit can play are CD-ROM, CD-R,  
and CD-RW.  
The medium formats must be ISO 9660 Level 1, Level 2, Joliet, or  
Romeo. The methods and precautions to be followed for writing  
MP3/WMA data are covered in <Notes on playing MP3/WMA>  
(page 6). Check that section before creating your MP3/WMA media.  
1 Eject the MD  
Press the [0MD] button.  
2 Close the faceplate  
Press the [0MD] button.  
Functions for MDs with group registration, such as Group Repeat,  
are available when <MD Group Setting> (page 30) is ON.  
Refer to <Notes on playing MD Group> (page 8) for the order of  
play in MDs with group registration.  
— 22 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing External Disc  
Track/File Search  
Playing discs set in the optional accessory disc player connected  
to this unit.  
Searching the song on the disc or in the MP3/WMA folder.  
Press the [4] or [¢] button.  
Press the [SRC] button.  
Select the display for the disc player you want.  
Display examples:  
Display  
Disc player  
"CD Changer"/ "CD Changer1"/ "CD Changer2"  
"MD Changer"/ "MD Changer1"/ "MD Changer2"  
CD changer  
MD changer  
Disc/Group Search  
Disc Search (Function of disc changer)/  
Group Search (Function of MD with Group Registration)  
Pause and play  
Press the [38] button.  
Each time the button is pressed it pauses and plays.  
Searching the disc or MD group.  
Press the [FM] or [AM] button.  
The functions that can be used and the information that can be  
displayed will differ depending on the external disc players being  
connected.  
Folder Search (Function of MP3/WMA)  
Selecting the folder recorded on the MP3/WMA media.  
Press the [FM] or [AM] button.  
Fast Forwarding and Reversing  
Folder Search is enabled while the play is paused, when the disc is  
played in an MP3 compatible disc changer.  
Fast Forwarding  
Hold down on the [¢] button.  
Release your finger to play the disc at that point.  
Reversing  
Hold down on the [4] button.  
Release your finger to play the disc at that point.  
When an MP3/WMA file is played, the sound is disabled during Fast  
Forwarding and Reversing.  
— 23 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MD/MP3/WMA/External disc control features  
Direct Track/File Search (Function of remote)  
Track/File/Disc/Folder/Group Repeat  
Doing Track/File Search by entering the Track number.  
Repeating the currently played song.  
Also repeating the currently played disc in the Disc changer,  
MP3/WMA folder or song in the MD group.  
1 Enter the Track number  
Press the number buttons on the remote.  
Press the [REP] button.  
Each time the button is pressed the Repeat Play switches as  
shown below.  
2 Do Track/File Search  
Press the [4] or [¢] button.  
Canceling Direct Track/File Search  
During CD/MD play  
Press the [38] button.  
Repeat play  
Display  
Track Repeat  
"Repeat" + "REP" indicator  
Disc Repeat  
"Disc Repeat" + "D.REP" indicator  
(In Disc Changer)  
Group Repeat  
"Group Repeat" + "G.REP" indicator  
(In MD with group registration)  
OFF  
Direct Disc Search  
(Function of disc changers with remote)  
Doing Disc Search by entering the disc number.  
During MP3/WMA play  
Repeat play  
Display  
1 Enter the disc number  
Press the number buttons on the remote.  
File Repeat  
Folder Repeat  
OFF  
"File Repeat" + "REP" indicator  
"Folder Repeat" + "REP" indicator  
2 Do Disc Search  
Press the [DISC+] or [DISC–] button.  
Canceling Direct Disc Search  
Press the [38] button.  
Track Scan  
Searching the song you want to listen to by playing the first part  
of each song.  
You can search the song on disc, in MP3/WMA folder or MD  
group.  
1 Start Track Scan  
Press the [SCN] button.  
"Track Scan"/"Scan" is displayed.  
"SCN" indicator is ON.  
— 24 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Release it when the song you want to listen to is played  
Magazine Random Play  
Press the [SCN] button.  
(Function of disc changer)  
Play the songs on all the discs in the disc changer in random  
order.  
Press the [M.RDM] button.  
Each time the button is pressed the Magazine Random Play turns  
ON or OFF.  
When it's ON, "M-Random" is displayed.  
When it's ON, "M.RDM" indicator is ON.  
Random Play  
Play all the songs on the disc or MP3/WMA folder in random  
order.  
Press the [RDM] button.  
Each time the button is pressed Random Play turns ON or OFF.  
When it's ON, "Random" is displayed.  
When it's ON, "RDM" indicator is ON.  
When the [¢] button is pressed, the next song select starts.  
• When the [¢] button is pressed, the next song select starts.  
• Group Search is disabled during Random Play.  
Group Random Play  
(Function of MD with Group Registration)  
When an MD with group registration is played, the songs in the  
group are played in random order.  
Turn the Group Random play ON  
Press the [G.RDM] button for at least 2 seconds.  
When it's ON, "G-Random" is displayed.  
When it's ON, "G.RDM" indicator is ON.  
Turn the Group Random play OFF  
Press the [G.RDM] button.  
"G.RDM" indicator is OFF.  
When the [¢] button is pressed, the next song select starts.  
— 25 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MD/MP3/WMA/External disc control  
features  
3 Decide the folder to play  
Folder Select (Function of MP3/WMA)  
Quickly selecting the folder you want to listen to.  
Press the [38] button.  
The Folder Select mode releases, and the MP3/WMA in the  
folder being displayed is played.  
1 Enter Folder Select mode  
Press the [SEL] button.  
"FOLDER SELECT" is displayed.  
During Select mode the folder information is displayed as shown  
below.  
The methods for moving to other folders in the folder select mode  
are different from those in the folder search mode.  
See <Notes on playing MP3/WMA> (page 6) for details.  
Folder number display  
02  
KENWOOD DPX-  
MP3 WMA Play  
Group Select  
03  
(Function of MD with Group Registration)  
Displaying the title of the group containing the song you want to  
listen to, and selecting the group.  
Folder name display  
- Folder name display: Display the currently selected folder name.  
- Folder number display: Displays the number in the folder belonging  
to the currently selected folder.  
1 Enter Group Select mode  
Press the [SEL] button.  
"GROUP SELECT" is displayed.  
During Select mode the group information is displayed as shown  
2 Select the folder level  
below.  
Press the [FM] or [AM] button.  
With the [FM] button you move 1 level down and with the [AM]  
button 1 level up.  
Group number display  
Group title display  
Selecting a folder in the same level  
Press the [4] or [¢] button.  
With the [4] button you move to the previous folder, and with  
the [¢] button to the next folder.  
02  
KENWOOD DPX-  
MD Group  
03  
Returning to the top level  
Press the [#3] button.  
- Group title display: Display the currently selected group title.  
- Group number display: Displays the number of currently selected  
group.  
To scroll the Folder names  
Press the [SCRL] button.  
2 Select the group  
Canceling the Folder Select mode  
Press the [FM] or [AM] button.  
Press the [SEL] button.  
— 26 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External TV control features  
With the [FM] button you move to the previous group, and with  
the [AM] button to the next group.  
4
¢
#1 - #6  
Tracking in the Group Select mode differs from that in the Group  
search.  
Refer to <Notes on playing MD Group> (page 8).  
To scroll the Group titles  
Press the [SCRL] button.  
Canceling the Group Select  
Press the [SEL] button.  
3 Decide the group to play  
Press the [38] button.  
The Group Select mode exits, and the first song in the group is  
played.  
SRC  
AM  
FM  
Text/Title Scroll  
Scrolling each text and title display on the screen.  
Press the [SCRL] button.  
Channel display  
— 27 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External TV control features  
When a commercially available LX BUS Television is connected to this unit,  
Canceling Direct Access Tuning  
it can be controlled from this unit.  
Press the [DIRECT] button on the remote.  
For functions not described in this instruction manual refer to the instruction  
manual for the LX BUS Television.  
Channel Preset Memory  
Putting the channel in the memory.  
Tuning  
Selecting the TV channel.  
1 Select the TV band  
1 Select TV source  
Press the [SRC] button.  
Select the "TV" display.  
Press the [FM] button.  
2 Select the TV channel  
Press the [4] or [¢] button.  
2 Select the TV band  
3 Put the channel in the memory  
Press the [FM] button.  
Press the [#1] — [#6] button for at least 2 seconds.  
The channel number display blinks 1 time.  
Each time the [FM] button is pressed TV bands and Video input  
switch.  
3 Select the TV channel  
Press the [4] or [¢] button.  
Preset Tuning  
Calling up the TV channels in the memory.  
Direct Access Tuning (Function of remote)  
Entering the TV channel and tuning.  
1 Select the TV band  
Press the [FM] button.  
1 Select the TV band  
2 Call up the TV channel  
Press the [FM] button.  
Press the [#1] [#6] button.  
2 Enter Direct Access Tuning mode  
Press the [DIRECT] button on the remote.  
"– – ch" is displayed.  
3 Enter the TV channel number  
Press the number buttons on the remote.  
Example:  
Desired TV channel  
Press button  
5
[#0], [#5]  
— 28 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Setting System  
Function Setting System  
4
Security Indicator FNC  
¢
#1 - #4  
Setting during operation beep sound etc. functions.  
The Function Setting System basic operation method is  
explained here. The reference for the Function items and their  
setting content is after this operation explanation.  
1 Select the source to set  
Press the [SRC] button.  
Select the source containing the function item you want to set.  
2 Enter Function Setting mode  
Press the [FNC] button for at least 1 second.  
"FUNCTION SET" is displayed.  
3 Select the Function item  
Press the [FM] or [AM] button.  
Example: When you want to set the beep sound select the  
"BEEP" display.  
SRC  
AM  
FM  
4 Set the Function item  
Press the [4] or [¢] button.  
Example: When "BEEP" is selected, each time the button is  
pressed it switches "BEEP On" or "BEEP Off". Select 1  
of them as the setting.  
You can continue by returning to step 3 and setting other items.  
5 Exit Function Setting mode  
Press the [FNC] button.  
When other items that are applicable to the basic operation method  
above are displayed afterwards their setting content chart is  
entered. (Normally the uppermost setting in the chart is the original  
setting.)  
Also, the explanation for items that aren't applicable are entered  
step by step.  
Function setting display  
— 29 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Setting System  
Function items in Standby:  
Opening Demonstration  
Setting the Demonstration when Power is turned ON.  
Touch Sensor Tone  
Setting the operation check sound (beep sound) ON/OFF.  
Display  
Setting  
"Opening On" Demonstration is carried out when Power is  
turned ON.  
"Opening Off" Demonstration is not carried out when Power is  
turned ON.  
Display  
Setting  
"BEEP On"  
"BEEP Off"  
Beep is heard.  
Beep canceled.  
Switching preout  
Switching the preout between the rear and non-fading. (In non-  
fading it outputs without effect from the fader control.)  
Security Code  
Because authorization by the Security Code is required when it's  
removed from the vehicle, personalizing this unit is by using the  
Security Code is a help in preventing theft.  
Display  
Setting  
"Preout Rear"  
"Preout N-F"  
Rear preout.  
Non-fading preout.  
When the Security Code function is activated, the code can't be  
changed and the function can't be released.  
Note, the Security Code can be set as the 4 digit number of your  
choice.  
1 Select Security Code mode  
Press the [FM] or [AM] button.  
Select the "CODE STBY" display.  
MD Group Setting  
Switching ON and OFF the MD Group function.  
2 Enter Security Code mode  
Display  
Setting  
Press the [38] button for at least 2 seconds.  
"MD Group On"  
"MD Group Off"  
Group management function is ON.  
Group management function is OFF.  
When "CODE WRITE" is displayed, "CODE  
" is displayed.  
****  
3 Enter the Security Code  
The MD group functions of Group Search, Group Repeat Play,  
Group Random Play and Group Select are available when an MD  
with group registration is played if <MD Group Setting> is ON.  
Because any track without group registration is not played, register  
it into any group or turn <MD Group Setting> OFF.  
Press the [#1] — [#4] button.  
For MD Group refer to <Notes on playing MD Group> (page 8).  
— 30 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Example: If the Security Code is "3510".  
Step Button #Times pressed  
Built-in Amp Setting  
Setting the built-in amplifier ON/OFF.  
Turning OFF this control enhances the preout quality.  
Display  
1
2
3
4
[#1]  
[#2]  
[#3]  
[#4]  
4
6
2
1
"3"  
"5"  
"1"  
"0"  
Display  
Setting  
"Built in AMP On"  
"Built in AMP Off"  
The built-in amplifier activates.  
The built-in amplifier deactivates.  
4 Confirm the Security Code  
Press the [38] button.  
When "CODE  
1" is displayed.  
****  
5 Do the step 3 and 4 step operation, and reenter the security  
Security Indicator  
code.  
"CODE WRITE" is displayed.  
The Security Code function activates.  
A red indicator will blink on the unit after the ACC is set to OFF,  
warning potential thieves.  
Display  
Setting  
When a Code different from step 3 is entered, repeat from step 3.  
"S.I. Off"  
"S.I. On"  
LED OFF.  
LED flashes.  
Press the Reset button and when it's removed from the  
battery power source  
1 Turn the power ON.  
2 Do the step 3 and 4 operation, and enter the Security Code.  
"CODE OK!" is displayed.  
Function items in Tuner source:  
Tuning Mode  
The unit can be used.  
If you enter the incorrect code, the power will turn off. Enter the  
correct code to turn the unit on.  
Sets the tuning mode.  
Tuning mode  
Display  
Operation  
Auto seek  
"Seek Auto 1" Automatic search for a  
station.  
Preset station seek "Seek Auto 2" Search in order of the  
Built-in Auxiliary input Setting  
Set the Built-in Auxiliary Input function.  
stations in the Preset  
memory.  
Display  
Setting  
Manual  
"Seek Manual" Normal manual tuning  
control.  
"AUX Off" When selecting the source there's no Auxiliary Input.  
"AUX On" When selecting the source there's Auxiliary Input.  
— 31 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Setting System  
Basic Operations of remote  
Auto Memory Entry  
For the operation method refer to <Auto Memory Entry> (page  
20).  
Function items in CD/MP3/WMA/MD/External disc source:  
Text Scroll  
Setting the displayed text scroll.  
DSP  
EQ  
Display  
Setting  
"Scroll Auto"  
Repeats scroll.  
"Scroll Manual"  
Scrolls when the display changes.  
AUD  
FNC  
The text scrolled is shown below.  
• CD text  
• Folder name/ File name/ MP3/WMA text  
• MD title/ MD Group title  
Function items in Auxiliary input source:  
Auxiliary Input Volume Adjustment  
Adjusting the volume of built-in Auxiliary input source.  
Display and Setting  
"AUX VOL +00"  
"AUX VOL +15"  
• Auxiliary Input Volume Adjustment cannot be applied to the  
optional Auxiliary input sources shown below.  
- KCA-S210A  
- CA-C1AX  
- CD changer with an Auxiliary input function installed  
• Auxiliary Input Volume Adjustment is available to be set when  
<Built-in Auxiliary input Setting> (page 31) is set to ON.  
— 32 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
[DSP] button  
Loading and Replacing the battery  
Use one lithium battery (CR2025).  
Insert the batteries with the + and – poles aligned properly,  
following the illustration inside the case.  
Turns <DSP(Digital Signal Processor) System> (page 17) ON and  
OFF.  
Selects <Sound Field Setting> (page 17).  
[EQ] button  
Makes <Preset Equalizer Curve Selection> (page 17).  
[AUD] button  
Enters the Audio control mode.  
Select the Audio control, X’Over control and Amp control mode.  
When the button is pressed for at least 1 second the Audio  
control mode is turned OFF.  
[FNC] button  
2WARNING  
Enters and exits the Function Setting mode.  
Refer to <Function Setting System> (page 29).  
Store unused batteries out of the reach of children. Contact a doctor  
immediately if the battery is accidentally swallowed.  
[FM]/ [AM] buttons  
[4]/ [¢] buttons  
Do not set the remote on hot places such as above the dashboard.  
Selects and adjusts the item.  
Refer to  
<Balance/ Fader Control> (page 15)/  
<X’Over & Amp Control> (page 16)/  
<Function Setting System> (page 29)/  
<Equalizer Curve Adjustment> (page 18).  
Basic operations  
[VOL.] buttons  
Adjusting the volume.  
[#0] — [#9] buttons  
Press buttons [#1] — [#3] to recall preset settings.  
Refer to <Recalling the X’Over setting> (page 16)/  
<Recalling the equalizer curve> (page 18).  
[SRC] button  
Each time the button is pressed the source switches.  
For the source switching order refer to <Selecting the Source>  
(page 11).  
[ATT] button  
Turning the volume down quickly.  
When it is pressed again it returns to the previous level.  
[ ] button  
*
Adjusting the Faceplate Angle.  
— 33 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations of remote  
In Tuner source  
In Disc source  
[FM]/ [AM] buttons  
Select the band.  
[4]/ [¢] buttons  
Searching the song on the disc or in the MP3/WMA folder.  
Each time the [FM] button is pressed it switches between the  
FM1, FM2, and FM3 bands.  
[DISC+]/ [DISC–] buttons  
Searching the disc, MD group and MP3/WMA folder.  
[4]/ [¢] buttons  
Tune up or down band.  
[38] button  
Each time the button is pressed the song pauses and plays.  
[#0] — [#9] buttons  
Press buttons [#1] — [#6] to recall preset stations.  
[#0] — [#9] buttons  
When in <Direct Track/File Search> (page 24) and <Direct Disc  
[DIRECT] button  
Search> (page 24), enter the track/disc number.  
Enters and cancels the <Direct Access Tuning> (page 19) mode.  
In TV source  
[FM] button  
Select the TV band and Video input.  
[4]/ [¢] buttons  
Select the TV channel.  
[#0] — [#9] buttons  
Press buttons [#1] — [#6] to recall preset TV channels.  
[DIRECT] button  
Enters and cancels the <Direct Access Tuning> (page 28) mode.  
— 34 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Accessories  
External view  
......... Number of items  
External view  
2WARNING  
......... Number of items  
If you connect the ignition wire (red) and the battery wire (yellow)  
to the car chassis (ground), you may cause a short circuit, that in  
turn may start a fire. Always connect those wires to the power  
source running through the fuse box.  
.........6  
3
1
2
.........1  
.........6  
(M5×6mm)  
2CAUTION  
• If your car's ignition does not have an ACC position, connect the  
ignition wires to a power source that can be turned on and off  
with the ignition key. If you connect the ignition wire to a power  
source with a constant voltage supply, as with battery wires, the  
battery may die.  
.........1  
4
(M5×7mm)  
• If the console has a lid, make sure to install the unit so that the  
faceplate will not hit the lid when closing and opening.  
• If the fuse blows, first make sure the wires aren’t touching to  
cause a short circuit, then replace the old fuse with one with the  
same rating.  
The use of any accessories except for those provided might result in  
damage to the unit. Make sure only to use the accessories shipped with  
the unit, as shown above.  
• Insulate unconnected wires with vinyl tape or other similar  
material. To prevent a short circuit, do not remove the caps on  
the ends of the unconnected wires or the terminals.  
• Connect the speaker wires correctly to the terminals to which  
they correspond. The unit may be damaged or fail to work if you  
share the - wires or ground them to any metal part in the car.  
• When only two speakers are being connected to the system,  
connect the connectors either to both the front output terminals  
or to both the rear output terminals (do not mix front and rear).  
For example, if you connect the + connector of the left speaker  
to a front output terminal, do not connect the - connector to a  
rear output terminal  
Installation Procedure  
1. To prevent a short circuit, remove the key from the ignition and  
disconnect the - battery.  
2. Make the proper input and output wire connections for each unit.  
3. Connect the speaker wires of the wiring harness.  
4. Connect the wiring harness wires in the following order: ground,  
battery, ignition.  
• After the unit is installed, check whether the brake lamps,  
blinkers, wipers, etc. on the car are working properly.  
• Mount the unit so that the mounting angle is 30° or less.  
5. Connect the wiring harness connector to the unit.  
6. Install the unit in your car.  
7. Reconnect the - battery.  
8. Press the reset button.  
— 35 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Wires to Terminals  
2 KENWOOD disc changer control input  
Rear left output (White)/  
Non-fading left output (White)  
Rear right output (Red) /  
Non-fading right output  
(Red)  
To connect the Disc changer,  
consult your Disc changer  
manual. 3  
FM/AM antenna input 1  
Front left output (White) 23  
Front right output (Red) 28  
AUX right input (Red)  
AUX left input (White)  
If no connections are made, do not let the wire come out from the tab.  
To car light control switch  
4
Fuse (10A)  
ILLUMI  
8
Dimmer control wire (Orange / White)  
Wiring harness  
(Accessory1)25  
5 When using the optional power amplifier,  
connect to its power control terminal.  
Power control wire (Blue/White)  
29  
White/Black  
To front left  
speaker 30  
To "EXT.AMP.CONT." terminal of the amplifier  
having the external amp control function.  
External amplifier control wire  
(Pink / Black)  
White  
7 Depending on what antenna you are using,  
connect either to the control terminal of the  
motor antenna, or to the power terminal for  
the booster amplifier of the film-type antenna.  
31  
32  
Gray/Black  
To front right  
speaker 33  
Motor antenna control wire (Blue)  
Ignition key  
switch  
10  
Gray  
ACC 13  
34  
35  
Green/Black  
To rear left  
speaker 36  
Ignition wire (Red) 20  
Car fuse  
box 14  
Green  
Car fuse box  
(Main fuse)  
11  
37  
38  
Battery wire (Yellow) 21  
Purple/Black  
To rear right  
speaker 39  
Purple  
40  
Ground wire (Black) · (To car chassis) 22  
Battery  
+
— 36 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation  
Make sure that the unit is installed securely in place. If the unit is  
unstable, it may malfunction (for example, the sound may skip).  
When a ground wire is  
included in the wiring kit  
(which is sold separately),  
fasten the ground wire with  
the binding screw located on  
the rear panel of this unit.  
Screw (M4X8)  
(commercially  
available)  
8 mm  
8mm  
MAX.  
MAX.  
ø5mm  
ø5mm  
Accessory2  
or Accessory3  
Accessory4  
(For Nissan car)  
— 37 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
What might seem to be a malfunction in your unit may  
just be the result of slight misoperation or miswiring.  
Before calling service, first check the following table  
for possible problems.  
? No sound can be heard, or the volume is low.  
The fader or balance settings are set all the way to one side.21  
Center the fader and balance settings.  
The input/output wires or wiring harness are connected incorrectly.22  
Reconnect the input/output wires or the wiring harness correctly.  
See the section on <Connecting Wires to Terminals>.  
General  
The <Built-in Amp Setting> (page 31) is OFF.  
? The power does not turn ON.01  
Turn it ON.  
The fuse has blown.  
After checking for short circuits in the wires, replace the fuse with  
one with the same rating.  
? The sound quality is poor or distorted.25  
One of the speaker wires is being pinched by a screw in the car.  
Check the speaker wiring.  
No ACC position on vehicle ignition.02  
Connect the same wire to the ignition as the battery wire.  
The speakers are not wired correctly.27  
Reconnect the speaker wires so that each output terminal is  
connected to a different speaker.  
? Nothing happens when the buttons are pressed.04  
The computer chip in the unit is not functioning normally.  
Press the reset button on the unit (page 4).  
? Non-fading output can’t be done.  
The <Switching preout> (page 30) is set on Rear preout.  
? There’s a source you can’t switch.06  
Set it on Non-fading preout.  
There’s no CD inserted.  
Set the media you want to listen to. If there’s no media in this  
unit, you can't switch to each source.  
? The Security Code item isn’t displayed in the Function Setting  
System.  
The Security Code function is already activated.  
When the Security Code function is activated it isn’t displayed in  
the Function Setting items.  
There’s no MD inserted.  
Set the MD you want to listen to. If there’s no MD in this unit,  
you can't switch to each source.  
The Disc changer isn’t connected.08  
Connect the Disc changer. If the Disc changer isn’t connected to  
it's input terminal, You can't switch to an external disc source.  
? The Touch Sensor Tone doesn’t sound.34  
The preout jack is being used.  
The Touch Sensor Tone can’t be output from the preout jack.  
? The memory is erased when the ignition is turned OFF.10  
? AUX cannot be selected. 103  
The battery wire has not been connected to the proper terminal.  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
<Built-in Auxiliary input Setting> is turned off.  
Refer to the <Built-in Auxiliary input Setting> (page 31) in the  
Function Setting and turn on the <Built-in Auxiliary input Setting>.  
The ignition and battery wire are incorrectly connected.11  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
— 38 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Disc source  
? The DSP effects are imperceptible.  
You are using a two-speaker system.  
? The specified disc does not play, but another one plays instead.52  
Use a front/rear four-speaker system.  
The specified CD is quite dirty.  
Clean the CD.  
The front and rear output are reversed.  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
The CD is upside-down.53  
Load the CD with the labeled side up.  
The + and - of speakers are reversed.  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
The disc is loaded in a different slot from that specified.54  
Eject the disc magazine and check the number for the specified  
disc.  
The fader or balance settings are set all the way to one side.  
The disc is severely scratched.55  
Try another disc instead.  
Reset the fader or balance settings.  
Tuner source  
? The specified track will not play.58  
Random play or magazine random play has been selected.  
? Radio reception is poor.  
Turn off random play or magazine random play.  
The car antenna is not extended.  
Pull the antenna out all the way.  
? Cannot play CD-R or CD-RW.60  
Finalization processing is not being conducted for CD-R/CD-RW.  
The antenna control wire is not connected.40  
Connect the wire correctly, referring to the section on  
<Connecting Wires to Terminals>.  
Conduct finalization processing with CD recorder.  
A non-compatible CD changer is being used to play the CD-R/CD-  
RW.61  
? The desired frequency can’t be entered with the Direct Access  
Use a CD changer compatible with CD-R/CD-RW to play.  
Tuning.41  
A station that can’t be received is being entered.  
? Can’t remove disc.64  
The cause is that more than 10 minutes has elapsed since the vehicle  
Enter a station that can be received.  
ACC switch was turned OFF.  
You’re trying to enter a frequency with a 0.01 MHz unit.42  
What can be designated in the FM band is to 0.1 MHz.  
The disc can only be removed within 10 minutes of the ACC  
switch being turned OFF. If more than 10 minutes has elapsed,  
turn the ACC switch ON again and press the Eject button.  
? The disc won’t insert.65  
There’s already another disc inserted.  
Press the [0] button and remove the disc.  
— 39 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
MP3/WMA source  
? The MD does not load.  
The insertion orientation of the MD is incorrect or the MD is upside  
down.  
? Cannot play an MP3/WMA.67  
Not conforming to ISO 9660 Level 1/2, Joliet, and Romeo.  
Use a medium conforming to ISO 9660 Level 1/2, Joliet, and  
Romeo.  
Insert the MD in the proper orientation.  
? Direct Track Search and Direct Disc Search can’t be done.  
Another function is ON.  
The MP3/WMA has no or invalid file name extension.  
Add the ".MP3/.WMA" extension to the MP3/WMA file name.  
Turn Random Play or other functions OFF.  
The media is scratched or dirty.69  
? Track Search can't be done.66-2  
Clean the media, referring to the section on <CD cleaning> (page  
For the discs first or last song.  
5).  
For each discs, Track Search can't be done in the backward  
direction for the first song or in the forward direction for the last  
song.  
? Noise or no sound generated when an MP3/WMA is played.70  
The file has the MP3/WMA file name extension while it is not an  
MP3/WMA.  
? The disc title is not displayed correctly.  
Do not use the ".MP3/.WMA" extension in non-MP3/WMA.  
Because <MD Group Setting> (page 30) is set to OFF, the Disc title  
and Group title are displayed.  
? Takes time before the unit starts playing MP3/WMA.71  
Set <MD Group Setting> of <Function Setting System> (page 30)  
to ON.  
The medium contains many folders, files, and hierarchical levels.  
The unit checks all files on the loaded medium first. If the medium  
has many files recorded, it may take a long time for the unit  
before it starts playing MP3/WMA.  
? Can’t select the song you want to listen to.  
The song you want to listen to has not been registered in any group.  
Set <MD Group Setting> of <Function Setting System> (page 30)  
to OFF or register the song into any Group.  
? Fails to play MP3/WMA in the intended order.72  
The MP3/WMA files were not written by the CD writer in the order in  
which you wanted them to be played.  
Depending on the CD writer, you may be able to set the order in  
which MP3/WMA files are to be played by writing them onto a  
medium with their file names beginning with play sequence  
numbers such as "01" to "99".  
? The sound skips when an MP3/WMA is being played.73-1  
The media is scratched or dirty.  
Clean the media, referring to the section on <CD cleaning> (page  
5).  
The recording condition is bad.73-2  
Record the media again or use another media.  
— 40 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
MD Group  
? The songs in the selected folder aren’t played in Folder Select  
mode.102  
? The MD group function doesn't work.  
There are no MP3/WMA in the selected folder.  
<MD Group Setting> of <Function Setting System> (page 30) is OFF.  
Set <MD Group Setting> of <Function Setting System> (page 30)  
to ON.  
Make sure there’s recorded content in the MP3/WMA media.  
? The MP3/WMA file/folder search takes time.  
Many files are recorded on the media.  
When the media directory is complex, the file/folder search can  
take time.  
? Can’t play MDs with group registration in the order of registration.  
The MD has been edited by an editor not equipped with the Group  
function or another inapplicable equipment.  
Register the MD Group with an editor equipped with the Group  
function or another applicable equipment.  
? The MP3/WMA related text isn’t displayed correctly.  
A character is entered that this unit can't display.  
For the characters that can be used for MP3/WMA text entry,  
refer to <Notes on playing MP3/WMA> (page 6).  
The Group title is attached by "//".  
Do not attach "//" to any title because the Group information may  
not correctly be recognized.  
? The MP3/WMA track time isn’t displayed correctly.80  
---  
? When <MD Group Setting> of <Function Setting System> (page 30)  
is set, the MD play is returned to the first track.  
There are times when it isn’t displayed correctly according to the  
MP3/WMA recording conditions.  
---  
When <MD Group Setting> of <Function Setting System> is set  
? Can't display the ID3 tag information correctly.  
during the MD play, the MD play is returned to the first track.  
Record is not made in conformity with the ID 3 tag version1.X.  
Record in conformity with the ID 3 tag version1.X.  
? Can’t perform File Search.  
You tried to perform File Search from the first file to the previous file or  
from the last file to the next file.  
File Search can’t be performed from the first file to the last file or  
from the last file to the first file except Folder Repeat being  
performed.  
— 41 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
Mecha Error: Something is wrong with the disc magazine. Or the  
unit is malfunctioning for some reason.E99  
The messages shown below display your systems  
condition.  
Check the disc magazine. And then press the reset  
button on the unit. If the "Mecha Error" code does  
not disappear, consult your nearest service center.  
EJECT:  
No disc magazine has been loaded in the changer.  
The disc magazine is not completely loaded.E01  
No Disc:  
Error 04:  
No disc has been loaded in the disc magazine.E02  
Load a disc into the disc magazine.  
H-HOLD:  
The protective circuit in the unit activates when the  
temperature inside the automatic disc changer  
exceeds 60°C (140°F), stopping all operation.E0d  
Cool down the unit by opening the windows or  
turning on the air conditioner. As the temperature  
falls below 60°C (140°F), the disc will start playing  
again.  
The CD is quite dirty. The CD is upside-down. The CD  
is scratched a lot.  
Clean the CD and load it correctly.  
Error 05:  
The CD is upside-down.E05  
Load the CD correctly.  
No Name:  
• Attempted to display DNPS during the CD play  
having no disc names preset.E51  
• Attempted to display SNPS during the receiving  
session of the station having no station name  
preset.E50  
Blank Disc:  
No Track:  
Nothing has been recorded on the MD.E10  
No tracks are recorded on the MD, although it has a  
title.E11  
Error 12:  
Error 15:  
MDs designed for data.  
No Title:  
No Text:  
Attempted to display the disc title or track title while  
the MD having no MD title/MD Group title is being  
played.  
Media was played that doesn’t have data recorded  
that the unit can play. E15  
• Attempted to display the disc text or track text  
while the CD having no CD text is being played.  
• Attempted to display the ID3 tag or contents  
description while the MP3/WMA having no ID3 tag  
or contents description is being played.  
Error 30:  
Error 77:  
The faceplate of the slave unit being connected to  
this unit has been removed.E30  
Replace it.  
The unit is malfunctioning for some reason.E77  
Press the reset button on the unit. If the "Error 77"  
code does not disappear, consult your nearest  
service center.  
LOAD (Blink): Discs are being exchanged in the Disc changer.  
File Check: The unit is reading the data on the disc.  
Please Close: Attempted to operate the disabled button while the  
disc is being ejected (faceplate being slid open).  
— 42 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
(Blink):  
The CD player section is not operating properly.E59  
Reinsert the CD. If the CD cannot be ejected or the  
display continues to flash even when the CD has  
been properly reinserted, please switch off the  
power and consult your nearest service center.  
(Blink):  
The MD player section is not operating properly.E561  
Reinsert the MD. If the MD cannot be ejected or  
the display continues to flash even when the MD  
has been properly reinserted, please switch off the  
power and consult your nearest service center.  
UNSUPPORTED FILE:  
A MP3/WMA is played with a format that this unit  
can't support.E63  
COPY PROTECTION:  
A copy-protected file is played.E64  
— 43 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Specifications subject to change without notice.  
FM tuner section  
MD player section  
Frequency (50 kHz space) ........................87.5 MHz – 108.0 MHz  
(200 kHz space) ......................87.9 MHz – 107.9 MHz  
Usable sensitivity (S/N = 30dB) ....................9.3dBf (0.8 µV/75 )  
Quieting Sensitivity (S/N = 50dB) ...............15.2dBf (1.6 µV/75 )  
Frequency response ( 3.0 dB)..............................30 Hz – 15 kHz  
Signal to Noise ratio (MONO)..............................................75 dB  
Selectivity ( 400 kHz).......................................................80 dB  
Stereo separation (1 kHz) ....................................................40 dB  
Laser diode....................................................GaAlAs (λ=780 nm)  
Digital filter (D/A)......................................8 Times Over Sampling  
D/A Converter .......................................................................1 Bit  
Spindle speed...............................................400 – 900 rpm (CLV)  
Wow & Flutter........................................Below Measurable Limit  
Frequency response ( 1 dB).................................20 Hz – 20 kHz  
Total harmonic distortion (1 kHz) ......................................0.01 %  
Signal to Noise ratio (1 kHz) ................................................90 dB  
Dynamic range ....................................................................90 dB  
Channel separation..............................................................85 dB  
AM tuner section  
Frequency range (9 kHz space) ....................531 kHz – 1611 kHz  
(10 kHz space) ..................530 kHz – 1700 kHz  
Usable sensitivity (S/N = 20dB)...........................28 dBµV (25 µV)  
Audio section  
Maximum output power.................................................50 W x 4  
Full Bandwidth Power (at less than 1% THD) ...............23 W x 4  
Preout level..........................................................1800 mV/10 kΩ  
Preout impedance............................................................600 Ω  
CD player section  
Laser diode....................................................GaAlAs (λ=780 nm)  
Digital filter (D/A)......................................8 Times Over Sampling  
D/A Converter .......................................................................1 Bit  
Spindle speed (CD-DA/MP3/WMA)  
Auxiliary input  
Frequency response ( 1 dB).................................20 Hz – 20 kHz  
Input Maximum Voltage .........................................................1.5 V  
Input Impedance...............................................................68 kΩ  
..............................................400 – 1000 rpm (CLV 2times)  
Wow & Flutter........................................Below Measurable Limit  
Frequency response ( 1 dB).................................10 Hz – 20 kHz  
Total harmonic distortion (1 kHz) ......................................0.01 %  
Signal to Noise ratio (1 kHz) ..............................................105 dB  
Dynamic range ....................................................................95 dB  
Channel separation..............................................................85 dB  
MP3 decode ...........Compliant with MPEG-1/2/2.5 Audio Layer-3  
WMA decode..........................Compliant with Windows Media Audio  
DSP/Equalizer section  
A/D, D/A converter  
....3-dimensional 18bit ∆∑ system 128 times oversampling  
Equalizer frequency...........................60/160/400/1k/2k/6k/16k Hz  
Adjustable range .............................................. 12 dB ( 6 STEP)  
General  
Operating voltage (11 – 16V allowable) .............................14.4 V  
Current consumption.............................................................10 A  
Installation Size (W x H x D) .......................178 x 100 x 155 mm  
Weight ................................................................................2.8 kg  
— 44 —  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IWDD 7143 User Manual
Intel Computer Hardware IXP45X User Manual
JAI Security Camera CV M50 User Manual
Jenn Air Microwave Oven JMW2430WB00 User Manual
JVC Cassette Player KS F360R User Manual
JVC Home Theater System SP WA30 User Manual
JVC Stereo System CA MXG50 User Manual
Kenwood Portable CD Player DMC K3 User Manual
Kettler Laminator FB600 User Manual
Kobe Range Hoods Ventilation Hood CH0030SQB 30 User Manual