CD-RECEIVER
Z828MP
INSTRUCTION MANUAL
B64-2089-00 (EW)
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
IMPORTANT INFORMATION
About the disc changer to be
connected:
To connect a disc changer having the "O-N"
switch to this unit, set the "O-N" switch to
"N".
When you connect a model with no "O-N"
switch, the converter cord CA-DS100
available as an option may be required. For
details, consult your Kenwood dealer.
If a model with no "O-N" switch is connected,
some unavailable functions and information
that cannot be displayed are generated, such
as the DNPS, DNPP, Magazine random play,
and CD Text display.
2WARNING
2CAUTION
To prevent injury and/or fire, take the
following precautions:
• Insert the unit all the way until it is fully
locked in place. Otherwise it may fly out of
place during collisions and other jolts.
• When extending the ignition, battery or
ground cables, make sure to use
automotive-grade cables or other cables
with an area of 0.75mm (AWG18) or more
to prevent cable deterioration and damage
to the cable coating.
• To prevent short circuits, never put or leave
any metallic objects (e.g., coins or metal
tools) inside the unit.
• If the unit starts to emit smoke or strange
smells, turn off the power immediately and
consult your Kenwood dealer.
To prevent damage to the machine,
take the following precautions:
• Make sure to ground the unit to a negative
12V DC power supply.
• Do not open the top or bottom covers of
the unit.
• Do not install the unit in a spot exposed to
direct sunlight or excessive heat or
humidity. Also avoid places with too much
dust or the possibility of water splashing.
• Do not subject the faceplate to excessive
shock, as it is a piece of precision
equipment.
2
Note that none of the KDC-C100, KDC-C302,
C205, C705, and non-Kenwood CD changers
can be connected.
• When replacing a fuse, only use a new one
with the prescribed rating. Using a fuse
with the wrong rating may cause your unit
to malfunction.
• Make sure not to get your fingers caught
between the faceplate and the unit.
• Be careful not to drop the unit or subject it
to strong shock.
The unit may break or crack because it
contains glass parts.
2CAUTION
• To prevent short circuits when replacing a
fuse, first disconnect the wiring harness.
• Do not place any object between the
faceplate and the unit.
• During installation, do not use any screws
except for the ones provided. The use of
improper screws might result in damage to
the main unit.
• Do not apply excessive force to the open
faceplate or place objects on it. Doing so
will cause damage or breakdown.
You can damage both your unit and
the CD changer if you connect them
incorrectly.
Do Not Load 8-cm (3-in.) CDs in the
CD slot
If you try to load an 8-cm CD with its adapter
into the unit, the adapter might separate
from the CD and damage the unit.
— 3 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
• The illustrations of the display and the
panel appearing in this manual are
examples used to explain more clearly how
the controls are used. Therefore, what
appears on the display in the illustrations
may differ from what appears on the
display on the actual equipment, and some
of the illustrations on the display may
represent something impossible in actual
operation.
• The functions that can be used and the
information that can be displayed will differ
depending on the external disc players
being connected.
NOTE
• If you experience problems during
installation, consult your Kenwood dealer.
Egnlish
• If the unit fails to operate properly, press
the Reset button. The unit returns to factory
settings when the Reset button is pressed.
If the unit still fails to operate properly after
the Reset button has been pressed,
contact your local KENWOOD dealer for
assistance.
• Press the reset button if the CD auto
changer is first controlled and operates
incorrectly. The original operating condition
will return.
Reset button
• We strongly recommend the use of the
Code Security function (page 39) to prevent
theft.
— 4 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the FaceplateTerminals
If the terminals on the unit or faceplate get
dirty, wipe them with a dry, soft cloth.
The marking of products using lasers
(Except for some areas)
CLASS 1
LASER PRODUCT
Cleaning the Unit
If the faceplate of this unit is stained, wipe it
with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the
stain off with a cloth moistened with neutral
cleaner, then wipe neutral detergent off.
The label is attached to the chassis/case and
says that the component uses laser beams
that have been classified as Class 1. It means
that the unit is utilizing laser beams that are
of a weaker class. There is no danger of
hazardous radiation outside the unit.
2CAUTION
Applying spray cleaner directly to the unit
may affect its mechanical parts. Wiping the
faceplate with a hard cloth or using a volatile
liquid such as thinner or alcohol may scratch
the surface or erases characters.
Lens Fogging
Right after you turn on the car heater in cold
weather, dew or condensation may form on
the lens in the CD player of the unit. Called
lens fogging, CDs may be impossible to play.
In such a situation, remove the disc and wait
for the condensation to evaporate. If the unit
still does not operate normally after a whilst,
consult your Kenwood dealer.
Cleaning the CD Slot
As dust can accumulate in the CD slot, clean
it occasionally. Your CDs can get scratched if
you put them in a dusty CD slot.
— 5 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Compact discs
Playing a CD that is dirty, scratched
or warped can cause the sound to
skip and the unit to operate
incorrectly, resulting in worsened
sound quality.Take the following
precautions to prevent your CDs from
getting scratched or damaged.
Storing CDs
Checking New CDs for Burrs
• Do not store CDs in areas exposed to
direct sunlight – such as a car seat or
above the fascia panel (dashboard) – or
other hot places.
A CD-R or CD-RW is more susceptible
than a music CD to damage from high
temperatures and humidity, and in some
cases, may become unusable if left in the
car for long periods of time.
When playing a new CD for the first time,
check that there are not any burrs stuck to
the perimeter of the disc or in the central
hole. CDs with burrs stuck on them may not
load properly or may skip whilst playing.
Remove burrs using a ballpoint pen or a
similar utensil.
Egnlish
Handling CDs
• Remove CDs from the unit when not
listening to them for a whilst, and put
them back in their cases. Do not stack CDs
that have been removed from their cases
or prop them against something.
• Do not touch the recorded side of the CD
(i.e., the side opposite the label) when
holding it.
Burrs
Burrs
Cleaning CDs
If a CD has become dirty, wipe it off gently
using a commercially available cleaning cloth
or a soft cotton cloth, starting from the
centre of the disc and moving outward. Do
not clean CDs with conventional record
cleaners, anti- static formulas, or chemicals
such as paint thinner or benzene.
• The reflective film on a CD-R or a CD-RW is
more fragile than that on an ordinary music
CD, and may peel off if scratched. Fingerprints
on a CD-R or CD-RW are also more likely to
cause skipping when the disc is played. For
these reasons, handle the disc very carefully.
Detailed handling instructions will appear on
the CD-R or CD-RW package: read this
information carefully before using the disc.
• Do not stick tape on either side of the CD.
Tape
— 6 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Do Not Load CD Accessories in Slot
Do Not Use Special Shape CDs
Do Not Use CDs with Sticker on the
Labelled Side
Do not use the CD with the label sticker
stuck on it.
Using such a CD may cause the CD to be
deformed and the sticker to peel off,
resulting in malfunction of the unit.
Do not use commercially available CD
accessories that can be loaded into the CD
slot, such as stabilisers, protective sheets,
or CD cleaning discs, since they can cause
the unit to malfunction.
• Be sure to use round shape CDs only for
this unit and do not use any special shape
CDs. Use of special shape CDs may cause
the unit to malfunction.
Removing the CD
Only remove the CD from the machine in a
horizontal direction. You may damage the
surface of the CD if you try pulling it down
as it ejects.
• Be sure to use CDs with disc mark
only for this unit.
• CD-Rs and CD-RWs which have not
undergone finalization processing cannot
be played. (For more information on
finalization processing, refer to the manual
for your CD-R/CD-RW writing software or
CD-R/CD-RW recorder.) Additionally,
depending on the recording status, it may
prove impossible to play certain CDs
recorded on CD-R or CD-RW.
— 7 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MP3 files
This unit can play MP3 files. Note, however, that the MP3 file
recording media and formats acceptable are limited. When writing
MP3 files, pay attention to the following restrictions.
Entering file and folder names
When entering file and folder names, use the alphanumeric
characters described above only. If you use any other character for
entry, the file and folder names are not displayed correctly. They may
neither be displayed correctly depending on the CD writer used.
Acceptable media
The MP3 file recording media acceptable to this unit are CD-ROM,
CD-R, and CD-RW.
Egnlish
The unit recognizes and plays only those MP3 files which have the
MP3 file name extension (.MP3). MP3 files should therefore be
saved with the MP3 extension.
Acceptable medium formats
The medium formats acceptable to this unit are ISO 9660 Level 1 and
Level 2 excluding the extended formats. When reading an MP3 file
written in a format other than ISO 9660 Level 1 or Level 2, the unit
may fail to play the file normally or display the file or folder name
correctly.
Writing files into a medium
When a medium containing MP3 data is loaded, the unit checks all
the files on the medium. If the medium contains a lot of folders or
non-MP3 files, therefore, it takes a long time until the unit starts
playing MP3 files.
The major specifications of ISO 9660 Level 1 and Level 2 are as follows:
• Maximum number of directory levels: 8
In addition, it may take time for the unit to move to the next MP3 file
or a file search or folder search may not be performed smoothly.
You should not write non-MP3 files or unneeded folders along with
MP3 files on the medium.
• Maximum number of files and folders per directory level:
253 (files and folders in total)
• Characters available to file and folder names:
A - Z, 0 - 9, _(underscore)
2CAUTION
When playing MP3 files on a medium which also contains non-MP3
files or folders, observe the following precautions. Loading such a
medium may produce loud noise to break the speakers.
• Maximum number of characters in file names :
Level 1: 12 (including a separator "." and a 3-character extension)
Level 2: 31 (including a separator "." and a 3-character extension)
• Do no attempt to play a medium containing a non-MP3 file with the
Settings for your MP3 encoder and CD writer
When you use your MP3 encoder to compress audio data to an MP3
file, set the transfer bit rate of the encoder to fixed 128 kbps.
When you use your CD writer to record MP3 files up to the
maximum disc capacity, disable additional writing. For recording on
an empty disk up to the maximum
MP3 extension.
The unit mistakes non-MP3 files for MP3 files as long as they have
the MP3 extension.
• Do not attempt to play a medium containing non MP3 file.
MP3 file playing order
When selected for play, folder search, file search, or for folder select,
files and folders are accessed in the order in which they were written
by the CD writer.
capacity at once, check Disc at Once.
Entering ID3 tag
Displayable ID3 tag is ID3 version 1 and
1.1; the character code is ASCII (see
List of Codes).The ID3 tag versions 1
and 1.1 have the following size
restrictions:
Because of this, the order in which they are to be recorded does not
match the order in which they are played. You may be able to set the
order in which MP3 files are to be played by writing them onto a
medium such as a CD-R with their file names beginning with play
sequence numbers such as "01" to "99", depending on your CD writer.
• Album name: 30 bytes or less
• Artist name: 30 bytes or less
• Song title: 30 bytes or less
— 8 —
Download from Www.Somanuals.com. All Manuals Search And Download.
For example, a medium with the following folder/file hierarchy is
subject to folder search, file search, or folder select as shown below.
When a folder search is executed with file
being played ...
When a folder search is executed with file
currently being
played, the unit selects folders as shown below, starting with
Root
Virtual folder
Folder
File
folder
.
Example of a medium's folder/file hierarchy Medium's virtual folder/file hierarchy
Operation of the button
for a folder select
(For a file search or folder search
)
Current
album number
FM Button
AM Button
When folder select is selected with file
to move from folder to folder ...
being played
During folder select, a virtual folder is created one hierarchical level
below each folder. The hierarchy is displayed as if the MP3 file
recorded in each folder were placed in that virtual folder.
When the unit enters the folder select mode with file
being
played, it selects folders as shown below, starting
with folder
(virtual folder
).
Operation of the button
Current
album number
4 Button
¢ Button
AM Button
FM Button
6
Level 1
Level 3
Level 5
Level 4
NOTE
Level 1
Level 2
Level 3
Level 5
Level 2
Level 4
• Each virtual folder is displayed with the original folder name
bounded by parentheses " ( ) ". For example, the virtual folder below
the folder named " 4 " is displayed with a name of " (4) ". The folder
name of each virtual folder is displayed with up to 30 characters (in
the ISO 9660 Level 2 format) or 8 characters (in the ISO 9660 Level
1 format).
When a file search is executed with file
being played ...
Operation of the button
Current
track number
¢ Button
4 Button
Beginning of
track
• The FM button is disabled in a folder because it has no subordinate
hierarchical level below. Immediately after entering the folder select
mode as in the above example, therefore, the FM button cannot be
used as there is no hierarchical level below folder
Once you have moved to folder using the
folder select function, for example, you can use the FM button to
select folder one level below.
.
— 9 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
Power
Release button
Turning on the power:
SRC/
PWR OFF
S.A/
2ZONE
Press the SRC button.
Q
¢
u
FM
Egnlish
NOTE
Turn the power on before carrying out the following procedures.
Turning off the power:
AUD
Hold down the PWR OFF button for one second or more.
2ZONE
DAB
PWR
OFF
NOTE
The status of the Code Security Function (page 39) is displayed
whenever the power is switched on.
"CODE ON" : Security Code has been registered
"CODE OFF" : Security Code has not been registered
LOUD
NF
DISP
MENU
NAME.S
4
d
AM/
NF
ATT/ DISP
LOUD
Volume
Increasing Volume:
Press the u button to turn up the volume.
Decreasing Volume:
Press the d button to turn down the volume.
LOUD indicator
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator".
— 10 —
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
Attenuator
• The mode switches to the next mode from any mode which
cannot be used.
This function allows you to turn down the volume quickly.
Turning Attenuator On/Off:
• The external disc control mode will differ depending on the unit
that is connected.
Press the ATT button to switch the attenuator on and off.
When the attenuator is off, the volume returns to the original
level.
• You cannot use the AUX input function of the optional switching
adapter KCA-S210A if this unit is connected with the KCA-
S210A.
NOTE
• If you have selected Standby mode, the timer function that
turns the power off automatically will be activated.
To find out how to set the time on the timer, and how to cancel
the timer function, refer to the section on the Power OFF Timer
function under Menu settings (page 45).
The Power OFF Timer function is enabled only after the security
code (page 39) is set up.
Turning the volume up, or turning it all the way down deactivates
the attenuator function.
NOTE
Switching Modes
Selecting AUX-name display
Holding down the DISP button for two seconds or more during
the AUX mode, AUX-name display is blinked for AUX-name
selection mode.
Pressing 4 or ¢ button during this mode allows you to select
"TV", "VIDEO", "GAME" , "PORTABLE" , "DVD", or "AUX" in the AUX
mode.
The AUX-name selection mode can be exited by pressing the
DISP button or doing nothing for 10 seconds.
Switching Modes:
Each time you press the SRC button, the mode switches as
follows:
▼
Tuner mode
▼
CD/MP3 mode
▼
External disc control mode 1
▼
External disc control mode 2 / AUX mode
▼
TV(AUX)
Loudness
▼
This function amplifies low and high tones when the volume is
Standby mode
turned down.
The LOUD indicator lights up, when the loudness function is
on.
Selecting the standby mode:
Press the SRC button repeatedly to select to "ALL OFF".
When "ALL OFF" is displayed, the standby mode is turned on.
The standby mode turns all functions off although leaving the
unit’s power on. Use this mode when you want to have the
display illuminated but do not want to listen to anything.
Turning Loudness On/Off:
Hold down the LOUD button for one second or more to switch
the loudness on and off.
— 11 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
• You can switch the Icon/Spectrum analyzer.
Switching Display Mode
You can select the display mode of this unit.
See "Icon/Spectrum analyzer Select" in the menu setting (page
41).
• You cannot switch into the "Display Type C" during the standby
mode.
Changing the Display Mode:
Egnlish
Each time you press the DISP button, the display mode
switches as follows:
"Display Type A"
Divide the display into the upper and lower parts
to separately provide different information.
Switching the Upper Part Display
This function switches the type of information on the upper
part display when the display mode is "DisplayType A" or
"DisplayType B" .
The upper part display
The lower part display
The Icon/
Spectrum
analyzer
1 Press the S.A button to enter the display control mode.
2 Each time you press the 4 or ¢ button, the upper part
"Display Type B"
The display will turn on by using only the upper part
of the display and clock.
display changes as follows:
InTuner mode:
The upper part display
Clock
Band display
+
Programme Service name(only during RDS station reception)/
Band display + Station frequency
"Display Type C"
Use the entire display to provide a single type
of information.
Radio text (only during RDS station reception)
Displaying Frequencies:
Hold down the DISP button for one second or more.
The frequency for the RDS station will be displayed for five
seconds instead of the station name.
The full screen display
NOTE
If the RDS station currently tuned to is transmitting no text
whilst the Radio Text Display mode is turned on, "NO TEXT"
will appear in the display. Whilst awaiting reception, "Waiting"
will be displayed.
NOTE
• You can switch display information between the upper part
display, lower part display, and full screen display. For further
information, see "Switching the Upper Part Display" (page 12),
"Switching the Lower Part Display" (page 14), "Switching Full-
Screen Display" (page 15) respectively.
2WARNING
To prevent accidents, drivers should not look at the display
whilst driving.
— 12 —
Download from Www.Somanuals.com. All Manuals Search And Download.
In CD/External disc control mode:
• In the AUX mode, the Upper Part Display comes up with the
AUX-name only, providing no cycle-through displays.
Track Time
3 Press the S.A button to end the display control mode.
NOTE
Disc name (DNPS)(only when being preset)
• For display mode selection, see "Switching display mode" (page
Disc Title (Units featuring CD text/MD only)
Track Title (Units featuring CD text/MD only)
12).
• The same items cannot be selected for both the upper part and
the lower part.
In MP3 mode:
Track Time
Disc name (DNPS)(only when being preset)
Folder name
ID3 tag album name
ID3 tag album name + ID3 tag artist name
NOTE
• You can give names to discs through the presetting disc
name function (page 32).
Note that depending on the unit, display may not be
possible.
• If you try to display the name of a disc that does not have
one, "NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for
which the disc title/track title has not been recorded, "NO
TEXT" is displayed for CD and "NO TITLE" is displayed for
MD.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
• If you don't turn the "Reading the MP3 ID tag" on, the ID3
tag will not be displayed.
See "Reading the MP3 ID3 tag" in the menu setting (page
44).
— 13 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
In MP3 mode:
Spectrum Analyzer + Clock
Switching the Lower Part Display
This function switches the type of information on the lower
part display when the display mode is "DisplayType A".
Egnlish
Date + Function indicator
1 Press the S.A button to enter the display control mode.
2 Each time you press the FM or AM button, the lower part
Disc name (DNPS) (only when being preset) + Function indicator
File name + Function indicator
display changes as follows:
InTuner mode:
ID3 tag song title + Function indicator
Spectrum Analyzer
Spectrum Analyzer + Clock
Date + Function indicator
Radio text (only during RDS station reception) + Function indicator
Spectrum Analyzer
In AUX mode:
Spectrum Analyzer + Clock
Date + Function indicator
Spectrum Analyzer
NOTE
If the RDS station currently tuned to is transmitting no text
whilst the Radio Text Display mode is turned on, "NO TEXT"
will appear in the display. Whilst awaiting reception, "Waiting"
will be displayed.
NOTE
2WARNING
• You can give names to discs through the presetting disc
name function (page 32).
To prevent accidents, drivers should not look at the display
whilst driving.
Note that depending on the unit, display may not be
possible.
In CD/External disc control mode:
• If you try to display the name of a disc that does not have
one, "NO NAME" is displayed instead.
• When there is an attempt to display the title of a disc for
which the disc title/track title has not been recorded, "NO
TEXT" is displayed for CD and "NO TITLE" is displayed for MD.
• Depending on the type of characters of the CD Text, some
characters may not be displayable.
Spectrum Analyzer + Clock
Date + Function indicator
Disc name (DNPS) (only when being preset) + Function indicator
• If you don't turn the "Reading the MP3 ID tag" on, the ID3
tag will not be displayed. See "Reading the MP3 ID3 tag" in
the menu setting (page 44).
Disc Title (Units featuring CD text/MD only) + Function indicator
Track Title (Units featuring CD text/MD only) + Function indicator
Spectrum Analyzer
3 Press the S.A button to end the display control mode.
— 14 —
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
TEL Mute
• For display mode selection, see "Switching display mode" (page
Shut down the audio system temporarily whenever an
incoming call is received.
12).
• If the display mode is set to "Display Type B", you can turn on or
turn off the clock.
NOTE
• The same items cannot be selected for both the upper part and
the lower part.
The function will not work if a cable is not connected to the car
phone.
When the telephone rings:
When a call is received, "CALL" is displayed and all the unit
functions are temporarily interrupted.
Restoring Original Unit Source During Phone Call:
Press the SRC button.
Switching Full-Screen Display
This function switches the type of information on the display
when the display mode is "DisplayType C".
"CALL" disappears from the display, and the volume of the
original source is restored gradually.
TurningTEL Mute Function Off After Phone Call:
Hang the phone up.
Each time you press the S.A button, the full screen display
changes as follows:
"CALL" disappears from the display.
The original source (i.e., the one used before the phone call) is
returned to automatically, and the volume restored gradually.
Demonstration
Spectrum Analyzer 1 + Icon/Spectrum analyzer
Spectrum Analyzer 2 + Icon/Spectrum analyzer
Spectrum Analyzer 3 + Icon/Spectrum analyzer
Spectrum Analyzer 4 + Icon/Spectrum analyzer
Graphic 1
Graphic 2
NOTE
• For display mode selection, see "Switching display mode" (page
12).
• You can switch the Icon/Spectrum analyzer.
See "Icon/Spectrum analyzer Select" in the menu setting (page
41).
— 15 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
2CAUTION
Switching Display during the Standby mode
• Do not apply excessive force to the faceplate bracket without
attaching the faceplate. Doing so will cause the faceplate
bracket to be deformed.
• Do not touch the connector on the faceplate bracket after
removing the faceplate. Touching the connector may cause
damage to the unit.
This function switches the type of information on the display
in standby mode.
Egnlish
1 Press the SRC button repeatedly to select the standby mode.
"ALL OFF" is displayed when the standby mode is selected.
2 Each time you press the S.A button, the display changes as
NOTE
follows:
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate
in its special storage case whilst detached.
• Do not expose the faceplate or its storage case to direct
sunlight or excessive heat or humidity. Also avoid places with
too much dust or the possibility of water splashing.
Demonstration (This is not available with the display mode set
to "Display Type B")
Date + Clock + Function indicator
"ALL OFF" + Function indicator
Reattaching the Faceplate:
1 Hold the faceplate so that the control panel faces the front
toward you and set the left side of the faceplate in the
faceplate bracket.
2CAUTION
Do not set the right side of the faceplate in the faceplate bracket
first, when reattaching the faceplate. Doing so may cause the
connector on the faceplate bracket to malfunction.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
2 Press the right side of the faceplate until it locks.
Removing the Faceplate:
1 Press the release button and drop open the faceplate.
2 Holding the centre part of the faceplate, pull it out.
System Q
3 Push upward the back of the faceplate bracket until it locks.
You can recall the best audio setting preset for different types
of the music.
— 16 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Speaker setting mode
Woofer setting mode
User memory*
Flat (Default setting)
Scan of Flat – Easy
Rock
4 • In speaker setting mode
Easy
Press either the 4 or ¢ button to select the type of
*User memory:
Top 40
The unit returns to the state
speaker. The setting switches as follows.
Jazz
adjusted the last time with
the audio control setting feature.
Off ("Speaker Setting OFF") / For 6x9/6 in. speaker ("Speaker
Pops
Setting 6 9/6 inch") /
*
For 5/4 in. speaker ("Speaker Setting 5/4 inch") /
For the OEM speaker ("Speaker Setting O.E.M.")
• In woofer setting mode
NOTE
Press either the 4 or ¢ button to select the type of Sub
The System Q function changes the values of the following
sound quality parameters:
woofer. The setting switches as follows.
"Woofer OFF" / "12in typeA" / "10in typeA" / "12in typeB" /
"10in typeB" / "12in typeC" / "10in typeC" / "8inch" / "12in
typeD" / "10in typeD"
Bass centre frequency, bass level, bass quality factor, bass
extend, middle centre frequency, middle level, middle quality
factor, treble centre frequency, treble level non-fading level, high-
pass filter frequency for front output, high-pass filter frequency
for rear output, and low-pass filter frequency for non-fading
output.
5 Press the Q button to end the speaker setting mode and
woofer setting mode.
NOTE
Their setting values are different depending on the setting of the
speaker and woofer setting mode.
• Speaker setting allows for tuning of bass, middle and treble.
• Woofer setting allows for tuning of high-pass filter frequency,
low-pass filter frequency and non-fading level.
Speaker & Woofer setting
Speaker setting allows the System Q settings to be fine-tuned
according to the type of speakers.
Non-Fading Output
You can turn the non-fading output on and off whilst the
preout is switched to the non-fading preout.
Woofer setting allows for Network configuration according to
the type of subwoofers.
1 Press the SRC button repeatedly to select the standby mode.
Turning non-fading output On/Off :
"ALL OFF" is displayed when the standby mode is selected.
Hold down the NF button for one second or more to set the
function ON or OFF.
2 Press the Q button to enter the speaker setting mode.
"NF ON" is displayed when the non-fading output is set ON.
3 Each time you press the FM/AM button, the mode switches as
follows:
— 17 —
Download from Www.Somanuals.com. All Manuals Search And Download.
General features
Audio control features
Dual Zone System
The following operation allows separate sound sources to
control the output of the front and rear speakers.
The Dual zone system can only be switched on when the
source is set to theTV(AUX) mode.
Egnlish
AUD
¢
FM
Dual Zone System On/Off:
Press the 2ZONE button for at least one second to switch the
Dual Zone System on and off.
"Zone 2 ON" is displayed when Dual Zone System is turned on.
AUD
2ZONE
DAB
PWR
OFF
NOTE
LOUD
NF
DISP
MENU
NAME.S
• You can select the speaker output, either front or rear, for the
AUX input and the unit’s tuner or audio source.
For details refer to "Switching Dual Zone System Output" (page
42) for the menu settings.
• The Bass, Middle, Treble and Loudness adjustments do not
affect the TV(AUX) channel.
4
AM
• When you set the Dual zone system to on whilst the non-fading
preout is switched on, the sound of the non-fading preout does
not be outputted.
• If the Attenuator function is turned on while the Dual Zone
System is enabled, the Attenuator is not applied to the TV(AUX)
source.
• The Dual Zone System function operates on the AUX source of
this unit only.
Selecting mode
Setting value
— 18 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Control Setting
Bass Centre Frequency
Adjust various parameters of sound quality.
Adjust the centre frequency of the bass.
Display and setting:
1 Hold down the AUD button for one second or more to enter
"Bass FRQ" : 60 / 70 / 80 / 100 (Only when the bass quality
factor is set to 1.00, 1.25 or 1.50) / 150 (Only
when the bass quality factor is set to 2.00) Hz.
the control mode.
2 Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change.
Please refer to the following for the contents of the adjustment
modes.
NOTE
Bass Level
Adjust the bass level.
Source tone memory
Each source (CD, TV(AUX), FM, AM, and disc changer) has its own
memory in which to store the bass, middle, treble and N-F level
settings.
The settings made for a particular source are then recalled
automatically whenever you use that source (e.g., FM mode uses
the tone settings made for FM, AM for AM, etc.).
Display and setting:
"Bass" : - 8 – + 8
3 Adjust each mode
Press the 4/¢ button.
Please refer to the following for the adjusting values.
Bass Quality Factor
Adjust the Bass quality factor.
4 Press the AUD button to end the control mode.
NOTE
Display and setting:
• Determining the parameters in the audio control setting will
clear all the adjustments made in the System Q and they are
replaced with the values made in the audio control setting.
• The following parameters can be set when the System Q
function on the menu settings is ON.
"Bass Q" : 1.00 / 1.25 / 1.50 / 2.00
Bass centre frequency, bass quality factor, bass extend, middle
centre frequency, middle quality factor, and treble centre
frequency.
Bass Extend
Switch the Bass Extend mode on/off.
Display and setting:
"Bass EXT" : ON / OFF (When the bass extend mode is set to
on, low frequency response is extended by 20%.)
— 19 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio control features
Middle Centre Frequency
Treble Level
Adjust the centre frequency of the middle.
Adjust the treble level.
Display and setting:
Display and setting:
Egnlish
"MID FRQ" : 0.5 / 1.0 / 1.5 / 2.0 kHz.
"TRE" : - 8 – + 8
Balance Level
Adjust the balance level.
Middle Level
Adjust the middle level.
Display and setting:
Display and setting:
"Balance" : Left 15 – Right 15
"MID" : - 8 – + 8
Fader Level
Adjust the fader level.
Middle Quality Factor
Adjust the middle quality factor.
Display and setting:
Display and setting:
"Fader" : Rear 15 – Front 15
"Middle Q" : 1.0 / 2.0
Non-Fading Level
Adjust the Non-fading output level.
Treble Centre Frequency
Adjust the centre frequency of the treble.
Display and setting:
Display and setting:
"NF Level" : - 15 – + 15
"TRE FRQ" : 10.0 / 12.5 / 15.0 / 17.5 kHz
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.
— 20 —
Download from Www.Somanuals.com. All Manuals Search And Download.
High-pass Filter Frequency for Front Output
Phase for Non-Fading Output
Adjust the frequency of the High-pass filter for front output.
Adjust the phase for Non-Fading output.
Display and setting:
Display and setting:
"HPF Front" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
"NF Phase" : Normal (0°) / Reverse (180°)
NOTE
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.
Volume Offset
High-pass Filter Frequency for Rear Output
Set the sound level of the each source selected by adjusting
the level difference between the basic sound level and the
required level.
Adjust the frequency of the High-pass filter for rear output.
Display and setting:
"HPF Rear" : Through / 40Hz / 60Hz / 80Hz / 100Hz / 120Hz /
150Hz / 180Hz / 220Hz
Display and setting:
"Volume Offset" : - 8 –
0
NOTE
You can separately set the high-pass filter for front and rear
output, including preouts. The high-pass filter does not affect the
non-fading preout.
Low-pass Filter Frequency for Non-Fading Output
Adjust the frequency of the Low-pass filter for Non-Fading
output.
Display and setting:
"LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.
— 21 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner features
Tuning
SRC
¢
FM
1 Press the SRC button repeatedly until the tuner mode is
obtained. "TUNER" is displayed only when the tuner mode is
selected.
Egnlish
2 Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between the FM1, FM2 and FM3.
AUD
2ZONE
DAB
PWR
OFF
Press the AM button to select the MW and LW bands.
LOUD
NF
DISP
MENU
NAME.S
3 • Auto Seek Tuning (Auto1)
Press the ¢ button to seek increasing frequencies.
Press the 4 button to seek decreasing frequencies.
• Preset station seek tuning (Auto2)
Press the ¢ button to move to the next preset station (i.e.,
the one with the next highest number), and the 4 button to
move to the last preset station (i.e., the one with the next
lowest number).
4
AM
#1-6
NOTE
If the frequencies stored at the preset numbers receive
stations which were not originally memorized when travelling
long distances, the preset number is not displayed. In such
cases, pressing the 4/¢ button to use preset station
seek will receive channel 1.
Preset station number
Band display
Frequency
• Manual Tuning (Manual)
Press the ¢ button to increase the frequency by one step.
Press the 4 button to decrease the frequency by one step.
NOTE
• The ST indicator lights up when stereo broadcasts are being
received.
• Please see the menu settings about selecting tuning mode.
(page 43)
ST indicator
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator."
Station Preset Memory
Store the frequency of the station currently being listened to.
You can then recall that station with a single touch of a button.
— 22 —
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Select the band/station that you want to have stored.
Preset station seek with Programme service
name
You can search for the preset station with Programme Service
name.
(Function of Remote Control)
2 Hold down the button (#1-6) that you want to use for the
station, for two seconds or more.
The button number blinks once in the display to indicate that
the data has been stored.
1 Press the DNPP button on the remote control.
"SNPP" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
NOTE
The display band switches in the following order:
= FM1 Ô FM2 Ô FM3 Ô AM +
You can store 6 stations in each of the FM1, FM2, FM3, and AM
(MW and LW) bands.
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations which have no names will be displayed as
frequencies.
Direct AccessTuning
When you know the frequency of the station that you want to
listen to, you can input it directly for quick access.
(Function of remote control)
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
1 Select the band by pressing the FM or AM button.
Pressing the AM button switches between the displays in the
reverse direction.
2 Press the DIRECT button.
"----" is displayed for 10 seconds.
2 Once the name is displayed for the station you want to listen
If you make no input in the 10-second period, direct access tuning
is automatically cancelled.
to
Press the OK button.
3 Enter the frequency of the desired station.
If you want to listen to an FM station at 92.1 MHz, for
example, press 0, 9, 2, and 1.
If you want to listen to an AM station at 810 kHz, for example,
press 0, 8, 1, and 0.
NOTE
Reception starts of the displayed station, and the seek mode
ends.
Cancelling mode during input:
Press the DNPP button.
The seek mode is cancelled.
• You cannot enter frequencies above or below what a band can
receive.
• FM frequencies can only be input in 0.1 MHz steps, and not
0.01MHz steps.
Cancelling Direct AccessTuning:
Press the DIRECT button again.
— 23 —
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS features
RDS (Radio Data System)
RDS is a digital information system that lets you receive
signals besides those of regular radio programmes, such as
network information being transmitted from radio stations.
When listening to an RDS station (ie, a station with RDS
capability), the programme service name of the station is
displayed along with the frequency, advising you quickly
which station is being received.
¢
FM
Egnlish
AUD
2ZONE
DAB
PWR
OFF
RDS (Radio Data System) stations also transmit frequency data
for the same station. When you are making long trips, this
function automatically switches to the particular frequency
with the best reception for the particular network of stations
that you want to listen to. The data is automatically stored,
allowing you to switch quickly to another RDS stations,
broadcasting the same programme, that has better reception.
These include stations stored in the station preset memory
that you often listen to.
LOUD
NF
DISP
MENU
NAME.S
4
38
AM
DISP
#1-6
TI/
TI VOL ADJ
Enhanced Other Network
Stations that offer <Enhanced Other Network> also transmit
information about other RDS stations that have traffic
information. When you are tuned to a station that is not
transmitting traffic information, but another RDS station starts
transmitting a traffic bulletin, the tuner automatically switches
to the other station for the duration of the bulletin.
Programme Service name
Radio text
TI indicator
Alarm
When an emergency transmission (announcing disasters, etc.)
is sent, all current functions are interrupted to allow the
warning to be received.
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator."
— 24 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Traffic Information Function
Presetting Volume forTraffic Information/News
You can listen to traffic information. If you are listening to
tapes or discs, they will continue playing until a traffic bulletin
is broadcast.
Preset the volume level to be used for traffic information and
news broadcasts.
1 Tune into the station for which you want to set the volume.
TurningTI function On/Off:
2 Adjust the volume to the desired level.
Press the TI button to turn the function on and off.
When the function is on, the TI indicator is turned on.
When none is being received, the TI indicator will blink on and
off. When a traffic information station is being received, the TI
indicator will turn on.
3 Hold down the TI VOL ADJ button for two seconds or more.
The volume level blinks once in the display to indicate that the
data has been stored.
Future traffic information/news broadcasts are heard at the
preset level.
NOTE
When a traffic bulletin begins to be broadcast, "Traffic Info" will
be displayed, and reception will begin at the preset volume.
If you are listening to a tape or disc when a traffic bulletin
begins, they will automatically be turned off. When the bulletin
ends or poor reception is experienced, the tape or disc will
begin playing again.
• The volume cannot be lowered by this function during tuner
reception. The volume is only set when it is louder than the
listening volume of the tuner.
• You can arrange only to listen to traffic information or news
bulletins with at preset volume with the volume set at
minimum.
NOTE
Pressing the TI button whilst in the MW/LW band automatically
switches reception to the FM band. However, the MW/LW band
is not returned to when the TI button is pressed again.
Switching to a DifferentTraffic Information Station:
Use the 4 / ¢ buttons to make an auto seek of the TI
stations in a certain band.
NOTE
• When you are listening to a tape or disc, you cannot change to
another TI station.
• When the auto TP seek function is turned on and reception
starts to weaken, the tuner automatically seeks traffic
information stations with better reception.
• If you are tuned to a station that is not a traffic information
station itself but which provides <Enhanced Other Network>
services, you can still have traffic information received.
• Holding down the TI button for one second or more when the TI
function is on in the disc mode results in a change to the
programme service name or frequency display of the traffic
information station for five seconds.
— 25 —
Download from Www.Somanuals.com. All Manuals Search And Download.
RDS features
24. Jazz Music
(Jazz Music)
ProgrammeType (PTY) Function
Conduct auto seek tuning only on those stations with selected
kinds of programmes.
25. Country Music
26. National Music
27. Oldies Music
28. Folk Music
(Country Music)
(National Music)
(Oldies Music)
(Folk Music)
Egnlish
1 Press the 38(PTY) button.
29. Documentary
(Documentary)
"PTY Select" is displayed, and the Programme Type Selection
(PTY) Mode entered.
(Speech.....1~9,16~23, 29, Music.....10~15, 24~28)
• You can select the type of programme directly by pressing a
preset button. The buttons are factory-set to the following
type of programmes:
If you make no key input in 30 seconds, the mode will
automatically turn off.
NOTE
1. Music
4. Other Music
2. Speech
5. Serious Classical
3. News
6. Varied
You cannot use this function whilst the traffic bulletin is received.
NOTE
Changing the Preset Button Settings for Programme Type
2 Select the type of programme to be received
• Press either the FM or AM button repeatedly until the type of
programme you want to listen to.
After selecting the type of programme to be stored in a certain
preset button, hold down that button for two seconds or more.
The previously stored data for that button are erased and the new
programme type is stored.
The selection includes:
Speech
(All Speech)
(All Music)
(News)
Music
1. News
3 Seeking the selected programme type
Press the 4 or ¢ button to make a seek of frequencies
2. Current Affairs
3. Information
4. Sports
(Current Affairs)
(Information)
(Sport)
with your selected type of programme.
The display blinks and the seek starts.
If your selected type of programme is found, the name of the
station is displayed and the station is tuned into.
"PTY Found" is displayed for about 30 seconds.
If you make no key input in 30 seconds, the PTY selection
mode will turn off automatically.
5. Education
6. Drama
(Education)
(Drama)
7. Culture
(Cultures)
8. Science
(Science)
9. Varied
(Varied Speech)
(Pop Music)
(Rock Music)
(Easy Listening M)
(Light Classic M)
(Serious Classics)
(Other Music)
(Weather & Metr)
(Finance)
NOTE
10. Pop Music
11. Rock Music
12. Easy Listening Music
13. Light Classical
14. Serious Classical
15. Other Music
16. Weather
If no programme can be found, "NO PTY" is displayed.
If you want to select another type of programme, repeat steps 2
and 3 above.
Switching to Other Stations with the SameType of Programme:
When "PTY Found" is displayed, perform auto seek tuning.
The tuner scans for another station with the same type of
programme.
17. Finance
18. Children’s programmes (Children's Prog)
Cancelling ProgrammeType Function During Its Operation:
19. Social Affairs
20. Religion
21. Phone In
22. Travel
(Social Affairs)
(Religion)
Press the 38(PTY) button.
(Phone In)
(Travel & Touring)
(Leisure & Hobby)
23. Leisure
— 26 —
Download from Www.Somanuals.com. All Manuals Search And Download.
in one scrolling display of the text.
Changing Language for ProgrammeType(PTY)
Function
Changing the display language to another language.
To scroll automatically:
1 Display the radio text referring to the "Switching the Upper Part
Display" (page 12) or "Switching the Lower Part Display" (page
14).
1 Press the 38(PTY) button.
The text will be displayed in one scrolling display.
"PTY Select" is displayed, and the Programme Type Selection
(PTY) Mode entered.
2 Holding down the DISP button for one second or more with
radio text displayed on the upper part display scrolls the text
once.
2 Enter the Changing Language Mode
Press the DISP button to enter the changing language mode.
NOTE
3 Changing the Display Language
Press the FM or AM button.
• Please see the menu settings (page 45) about switching
between manual scrolling and automatic scrolling.
• You can scroll text when "Display Type A" or "Display Type B" has
been selected by the switching display mode function.
For display mode selection, see "Switching display mode" (page
12).
Each time the button is pressed, the display language will
change as follows:
English
Spanish
French
Dutch
German
Swedish
Portuguese
Norwegian
4 Press the DISP button to end the changing language mode.
RadioText Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
To scroll manually:
1 Display the radio text in upper part display, referring to
"Switching the Upper Part Display" (page 12).
2 Holding down the DISP button for one second or more results
— 27 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/External disc control features
Playing CDs
Playing CDs:
Release button
SRC
DISC+
¢
A press of the release button causes the faceplate to drop to
the front, thereby exposing the CD slot.
Egnlish
Holding the CD with the labeled side facing up, insert it in the
slot. The CD will start playing.
Push back the faceplate with your hand until it locks.
The IN indicator will light when a CD has been inserted.
AUD
2ZONE
DAB
PWR
OFF
2CAUTION
When inserting a CD, make sure the CD has been completely
drawn in before pushing back the faceplate. Failing to do so
might scratch the CD.
LOUD
NF
DISP
MENU
NAME.S
Playing CDs Already Inserted:
Press the SRC button repeatedly until the CD mode is
obtained.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
4
38
DISC-
REP
SCAN
M.RDM
DISP/
NAME.S
RDM
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Eject:
Press the release button and drop open the faceplate.
Press the 0 button located near the CD slot.
The CD stops playing and ejects from the slot.
Push back the faceplate with your hand until it locks.
Disc number Track number
Track time
IN indicator
Disc title/Track title/DNPS
2CAUTION
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator".
• Do not attempt to insert a CD into the slot if another one is
already there.
— 28 —
Download from Www.Somanuals.com. All Manuals Search And Download.
• The unit can only play 12-cm (5-inch) CDs. If you insert an 8-cm
(3-inch) CD, it will get stuck inside and can cause the unit to
malfunction.
• When the faceplate has been dropped open, it might interfere
with the gear lever or something else. If this happens, pay
attention to safety and move the gear lever or take an
appropriate action, then operate the unit.
NOTE
When one disc has finished playing its last track, the next disc in
the changer starts playing. When the last disc in the changer has
finished, the player returns to the first disc and starts playing it.
• Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Fast Forwarding and Reversing Disc Play
NOTE
Fast Forwarding Disc Play:
When you load a CD and eject it right away, the next time you try
to insert the CD may not load. In such a situation, take the CD
out for a moment and then reinsert it.
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
NOTE
Playing Other Disc mode
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
cancelled when it reaches the beginning of a track, at which point
normal play automatically resumes.
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
NOTE
The external disc control mode will differ, depending on the unit
that is connected.
Mode Display Examples
• "CD2"...when a CD player is connected
• "CD-CH"/"MD-CH"/"DISC"...when a disc changer is connected
• "CD-CH1"/"MD-CH1"/"DISC1", "CD-CH2"/"MD-CH2"/"DISC2"
...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
— 29 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/External disc control features
Each time the button is pressed, the displayed disc number
increases by one.
Track Search
Search forwards or backwards through the tracks on the disc
until you reach the one that you want to listen to.
Play starts at the beginning of the displayed disc.
NOTE
Egnlish
Making a ReverseTrack Search:
"Load" is displayed when discs are being exchanged on the disc
changer.
Press the 4 button to display the desired track number.
Press once to search back to the beginning of the current track,
twice to search back to the beginning of the previous track,
and so forth.
Play starts at the beginning of the displayed track number.
NOTE
Track / Disc Repeat
Repeat playing the current track or disc.
(For disc changers)
Pressing the 4 button whilst listening to track 1 only searches
back to the beginning of that track. The reverse search is not
"recycled" to the last track on the disc.
Turning Repeat Play Function On/Off:
Press the REP button to switch the repeat play function on and
off as follows :
Making a ForwardTrack Search:
Press the ¢ button to display the desired track number.
Press once to fast forward to the next track, twice to fast
forward to the track after that, and so forth.
▼
Track Repeat ON
▼
Play starts at the beginning of the displayed track number.
NOTE
Disc Repeat ON (Function of disc changers)
▼
(For disc changers)
Repeat OFF
You cannot make a forward track search when listening to the
last track on a disc.
"Track Repeat ON"/"Repeat ON" is displayed and the track
number blinks in the display when track repeat is on.
"Disc Repeat ON" is displayed and the disc number blinks in
the display when disc repeat is on.
NOTE
Disc Search
(Function of disc changers)
Repeat play is cancelled when you eject the disc.
Search forwards or backwards through the discs in a disc
changer until you reach the one that you want to listen to.
Making a Reverse Disc Search:
Press the DISC– button to display the desired disc number.
Each time the button is pressed, the displayed disc number
decreases by one.
Track Scan
Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
Press the DISC+ button to display the desired disc number.
— 30 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting theTrack Scan:
Magazine Random Play
Play the tracks on all the discs in the disc changer in random
order.
(Function of disc changers)
Press the SCAN button. "Scan ON" is displayed and the first 10
seconds of each track are played, and the tracks are played in
order.
The track number currently being heard blinks in the display.
1 Press the M.RDM button to switch the magazine random play
function on and off.
Stopping to Listen to theTrack Being Scanned:
Press the 38 or SCAN button again to stop the scan and keep
on listening to a track normally.
"M.Random ON" is displayed when magazine random play is
turned on.
The display of the disc and track numbers change continuously
as the next track is being selected.
NOTE
The track scan function is cancelled when you eject the disc.
When the disc/track has been selected, play starts.
The selected disc/track number blinks in the display as it is
being played.
2 To change the track being heard, press the ¢ button.
Another disc/track is selected and played.
Random Play
Play all the tracks on the current disc in random order.
NOTE
• Magazine random play is cancelled when you eject the disc.
• The time needed for random selection depends on the number
of discs loaded in the disc magazine.
1 Press the RDM button to switch the random play function on
and off.
"Random ON" is displayed when random play is turned on.
The display of the track number changes continuously as the
next track is being selected.
When the track has been selected, play starts.
The selected track number blinks in the display as it is being
played.
NOTE
(For disc changers)
When all the tracks on a certain disc have been played using the
random play function, the next disc on the changer starts playing
(with the random play function still turned on).
2 To change the track being heard, press the ¢ button.
Another track is selected and played.
NOTE
Random play is cancelled when you eject the disc.
— 31 —
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/External disc control features
• The Disc Name Preset function cannot be used during the
Magazine random play as well as while a disc title or track title
is displayed in the upper part display.
• The Disc Name Preset function cannot be used while folder
name or ID3 tag(Artist, Album) is displayed in the upper part
display.
Text Scroll
This function permits the text to be scrolled and the entire text
to be displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
Egnlish
To scroll manually:
2 Press the NAME.S button for at least two seconds.
1 Display the disc or track title in the upper part display, referring
"NAME SET" is displayed and the disc name preset mode is
to "Switching the Upper Part Display" (page 12).
entered.
2 Holding down the DISP button for one second or more results
The cursor blinks in the position where character input can be
made.
in one scrolling display of the titles.
To scroll automatically:
3 Press either the 4 or ¢ button to move the cursor to the
desired position.
1 Display the disc or track title referring to the "Switching the
Upper Part Display" (page 12) or "Switching the Lower Part
Display" (page 14).
The 4 button moves the cursor to the left, and the ¢
button to the right.
The titles will be displayed in one scrolling display.
You can also move the cursor left or right by pressing the 4
or ¢ buttons, respectively, on the remote control.
2 Holding down the DISP button for one second or more results
in one scrolling display of the titles.
4 Each press of the 38 button results in the type of characters
that are to be entered changing between alphabet and
numerals/symbols.
NOTE
• Please see the menu settings (page 45) about switching
between manual scrolling and automatic scrolling.
• You can scroll text when "Display Type A" or "Display Type B" has
been selected by the switching display mode function.
For display mode selection, see "Switching display mode" (page
12).
Press the DISC+ or DISC– button to display the desired
character.
Characters that can be displayed are as follows.
Alphabet (upper case): A ~ Z
• You cannot use the text scroll function during magazine random
play.
Alphabet (lower case): a ~ z
Numerals and symbols: 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ]
Special characters: á
à
ä
é
è
í
ì
ó
ò
ú
ù
Ñ
î
ê
ï
ë
ô
ö
û
ü
ñ
ç
©
â
Presetting Disc Names (DNPS)
Store the names of discs to be displayed when played.
NOTE
Direct Alphabet Input
(Function of remote control with number/letter entry buttons)
You can directly input letters using the number/letter entry
buttons on the remote control.
1 Play the disc whose name you want to preset.
NOTE
Example: Use the following table to enter the name "DANCE".
• This function is not available for disc changers that do not
feature the Disc Name Preset function.
— 32 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Name Preset Play (DNPP)
Character
Button to press
# Times pressed
(Function of Remote Control)
#3
#2
#6
#2
#3
1
1
2
3
2
“D”
“A”
“N”
“C”
“E”
If you have preset the name of a disc that you want to listen to
in the disc changer, you can look for it by name and start
playing it.
1 Press the DNPP button on the remote control.
"DNPP" will appear in the display, and the disc name preset
play mode is entered.
The names of all the discs in the disc changer will appear
successively in the display for five seconds each.
Discs whose names have not been preset will appear as "NO
NAME" in the display.
5 Continue steps 3 and 4 until all the characters are chosen for
the name.
NOTE
NOTE
You can enter up to 12 characters for each name.
• This function can only be used in disc changers that were
manufactured or sold as of 1997. Also note that some units
cannot provide a display unless the disc name preset has been
made by the unit that is playing.
• Discs in the disc changer that have never been played before
will appear as "NO ACCESS" when the disc names are
displayed. When you cannot identify a disc because of the "NO
ACCESS" display after inserting a disc magazine, try playing it to
display the disc name.
Also note that "NO DISC" will be displayed when a disc has not
been loaded.
6 Press either the NAME.S button on the main unit or the OK
button on the remote control.
The disc name is stored and the disc name preset mode is
cancelled.
If you make no entry in a 10-second period, the name will be
stored with the characters input so far.
NOTE
• You cannot store the names of the discs in the MDs.
• The number of discs whose names can be stored will differ
depending on the disc changer that is connected. Please see
your disc changer manual for details.
Rapid display (forward / reverse):
Up to 30 CDs can be registered with this unit.
Press the DISC+ or DISC– button.
• Discs are identified by their total length and number of tracks. If
another disc happens to have the same specifications as one
that you have already stored a name for, the name will be
displayed for it, too.
Pressing the DISC+ button will rapidly display the preset
names/disc titles in order.
Pressing the DISC– button will rapidly display the preset
names/disc titles in reverse order.
• If you want to change the name of a disc, repeat steps 1 and 2
to display the name, and then repeat steps 3 and 4 to input the
changes.
• Pressing the reset button erases the disc names stored in this
unit, but does not erase the names stored in a disc changer.
• MP3 recorded media allows you to register a single media
name only. Registration for each CD as it is available with the
CD cannot be achieved.
2 When the name appears for the disc you want to play
Press the OK button.
The disc whose name is displayed will be recalled, and the disc
name preset play (DNPP) mode will end.
To cancell DNPP mode:
Press the DNPP button.
The disc name preset play (DNPP) mode will be cancelled.
— 33 —
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 player features
Playing MP3 Files
Release button
Play:
SRC
FM
¢
A press of the release button causes the faceplate to drop to
the front, thereby exposing the CD slot.
Egnlish
Holding the media with the labeled side facing up, insert it in
the slot. The media will start playing.
Push back the faceplate with your hand until it locks.
The IN indicator will light when a media has been inserted.
AUD
2ZONE
DAB
PWR
OFF
2CAUTION
LOUD
NF
DISP
MENU
NAME.S
When inserting a media, make sure the media has been
completely drawn in before pushing back the faceplate. Failing to
do so might scratch the media.
Playing Media Already Inserted:
4
Press the SRC button repeatedly to select the CD mode.
"CD" is displayed when the CD mode has been selected.
The media will start playing.
38
REP
DISP
#2 #3/
RDM
AM
Pausing and Restarting Media Play:
Press the 38 button to make the media pause.
Press the same button again to start play again.
Eject:
Press the release button and drop open the faceplate.
Press the 0 button located near the CD slot.
The media stops playing and ejects from the slot.
Push back the faceplate with your hand until it locks.
file number
Track time
file name/
ID3 tag song title/
DNPS
IN indicator
2CAUTION
• Do not attempt to insert a media into the slot if another one is
already there.
Description about this indicator for these features can be displayed
by setting the Lower Part Display (page 14) to
"... + Function indicator".
— 34 —
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the faceplate has been dropped open, it might interfere
with the gear lever or something else. If this happens, pay
attention to safety and move the gear lever or take an
appropriate action, then operate the unit.
NOTE
It may take time for the file search depending on the number of
files and the state of the folder hierarchy.
• Do not apply excessive force to the open faceplate or place
objects on it. Doing so will cause damage or breakdown.
• Do not use the unit with the faceplate in the open condition.
Doing so will cause breakdown.
Folder Search
NOTE
Search forward or backward through the folders on the media.
• When you load a media and eject it right away, the next time
you try to insert the media may not load. In such a situation,
take the media out for a moment and then reinsert it.
• The MP3 media that this unit can play are CD-ROM, CD-R, and
CD-RW.
The medium formats must be ISO 9660 Level 1 or Level 2. The
methods and precautions to be followed for writing MP3 files
are covered in "Notes on playing MP3 files" (page 8). Check that
section before creating your MP3 media.
• It takes time for the unit to check each medium to see if it
contains any MP3 file before it starts playing the medium.
Making a Backward Folder Search:
Press the AM button.
Pressing the button moves back to the previous folder. The unit
plays the medium starts at the beginning of the selected
folder.
If the selected folder contains no MP3 file, the unit
automatically plays the file nearest to that folder in the MP3
file playing order.
Making a Forward Folder Search:
Press the FM button.
Pressing the button moves to the next folder. The unit plays the
medium starts at the beginning of the selected folder.
If the selected folder contains no MP3 file, the unit
automatically plays the file nearest to that folder in the MP3
file playing order.
File Search
NOTE
Search forward or backward through the files on the media
until you reach the one that you want to listen to.
It may take time for the folder search depending on the number
of files and the state of the folder hierarchy.
Making a Backward File Search:
Press the 4 button to display the desired file number.
Press once to search back to the beginning of the current file,
twice to search back to the beginning of the previous file, and
so forth.
Play starts at the beginning of the displayed file number.
Making a Forward File Search:
Press the ¢ button to display the desired file number.
Press once to fast forward to the next file, twice to fast
forward to the file after that, and so forth.
Play starts at the beginning of the displayed file number.
— 35 —
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 player features
<Folder name display>
Fast Forwarding and Reversing MP3 Play
Displays the current folder name.
Fast Forwarding MP3 Play:
Hold down on the ¢ button.
Egnlish
Release your finger to play the MP3 at that point.
Reversing MP3 Play:
Hold down on the 4 button.
<Hierarchical level display>
Displays the hierarchical level
of the current folder.
Release your finger to play the MP3 at the point.
NOTE
• If you reach the beginning of the file with the fast reverse, the
player enters the pause state. If you release the button, the
music begins to play.
• During the fast forwarding and reversing process, audible tone
and time code display are disabled.
<Folder number display>
Displays the number in the folder
belonging to the currently selected folder.
NOTE
• Time code may be different between the states before and after
the fast forwarding and reversing operations.
• The time code for the first few seconds on pressing the button
may be unchanged.
• The time code variation may be large if a file is encoded in
variable bit rate (VBR).
The unit cannot enter the folder select mode if the loaded
medium contains no folder recorded.
2 Selecting the desired folder
• You can move from folder to folder at the same hierarchical
level:
Press the ¢ button to move to the next folder at the same
hierarchical level.
Press the 4 button to move to the previous folder at the
same hierarchical level.
• You can select the hierarchical level of the folder:
Press the FM button to move down one level in the folder
hierarchy.
Press the AM button to move up one level in the folder
hierarchy.
Folder Select
You can use this function to select the folder containing the
sound file you want be played.
• You can return to the first hierarchical level (Root Jump):
Press the #3 button to return to the folder at the top
hierarchical level on the medium currently being played.
1 Enter the Folder Select Mode
Pressing the #2 button enters the folder select mode.
The display reads as shown below.
NOTE
The methods for moving to other folders in the folder select
mode are different from those in the folder search mode.
See "Notes on playing MP3 files" (page 8) for details.
— 36 —
Download from Www.Somanuals.com. All Manuals Search And Download.
3 When you have found a desired folder
Press either the #2 or 38 button.
2 To change the file being heard, press the ¢ button.
Another file will be selected and played.
This ends the folder select mode and starts playing the first
MP3 file in the selected folder.
NOTE
Random play is cancelled when you eject the media.
NOTE
• If the folder selected after leaving the folder select mode
contains no MP3 file, the unit plays the MP3 file nearest to that
folder in the MP3 file playing order.
• During the folder select mode, no audible sound is produced.
Name Scroll for MP3
This function permits the folder/file name and ID3 tag(Song
title, Artist, Album) to be scrolled and the entire name to be
displayed. The scrolling method differs depending on the
setting of scrolling in the menu.
File / Folder Repeat
Repeat playing the file or the folder currently being listened to.
To scroll manually:
Turning Repeat Play On/Off:
1
Display the folder name or ID3 tag (artist name, album name)
in the upper part display, referring to "Switching the Upper Part
Display" (page 12).
Press the REP button to switch repeat file/folder play on and
off as follows:
2
▼
Pressing the DISP button for at least one second results in one
scrolling display of the names.
File Repeat ON
▼
To scroll automatically:
Folder Repeat ON
▼
1
Display the folder/file name or ID3 tag (song title, artist name,
album name), referring to "Switching the Upper Part Display"
(page 12) or "Switching the Lower Part Display" (page 14).
The display of the name will be scrolled repeatedly.
File/Folder Repeat OFF
"File Repeat ON" is displayed when file repeat is on.
"Folder Repeat ON" is displayed when folder repeat is on.
NOTE
2
Pressing the DISP button for at least one second results in one
scrolling display of the names.
Repeat play is cancelled when you eject the media.
NOTE
• Please see the menu settings (page 45) about switching
between manual scrolling and automatic scrolling.
• You can scroll the names when "Display Type A" or "Display Type
B" has been selected by the switching display mode function.
For display mode selection, see "Switching display mode" (page
12).
Random Play
Play all the files on the current folder in random order.
1 Press the RDM button to switch random play on and off.
"Random ON" is displayed when random play is turned on.
When the file has been selected, play will begin.
— 37 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
Menu System
You can set the defaults for additional functions in the menu
mode. Make a setting for each function, referring to the
following operations.
¢
FM
SRC
Egnlish
1 Enter the menu mode
Hold down the MENU button for one second or more.
"MENU" is displayed when the menu mode is entered.
The function that you can adjust is indicated with the current
settings displayed.
AUD
2ZONE
DAB
PWR
OFF
LOUD
NF
DISP
MENU
NAME.S
2 Selecting function to set
Press the FM button to search through the functions until you
see the one you want to adjust in the display.
Press the AM button to search through the functions backward.
Function items change in the order of features that follow in
the menu system.
Example: If you want to switch the setting of the touch sensor
tone function from on to off, first search through the
functions until you see "Beep ON" in the display.
4
AM
MENU
DISP
#1-6
3 Changing setting for currently displayed function
Press either the 4 or ¢ button.
The setting will change for each function.
Example: The setting of the touch sensor tone will switch from
on to off, and "Beep OFF" is displayed.
Menu display
4 Ending the menu mode
Press the MENU button.
NOTE
Make sure to end the menu mode when finished.
If you fail to end the menu mode, several functions may not
operate properly, including the Traffic Information function, the
News Bulletin function with PTY news timeout setting, and the
Alarm function.
RDS indicator
NEWS indicator
— 38 —
Download from Www.Somanuals.com. All Manuals Search And Download.
"RE-ENTER" will appear in the display for one second, asking
you to enter the code once again for confirmation. When
"CODE" appears in the display, you can start inputting the code.
Code Security Function <In Standby mode>
After a security code has been registered, power cannot be
restored if the battery is disconnected from the unit unless the
code is first input.
6 Press the Preset button and input the security code again.
7 Hold down the DISP button again for three seconds or more.
"APPROVED" will appear in the display, with the code security
function turning on. From this point on, if the unit is
disconnected from the battery, the security code must be
entered the first time that the unit's power is turned on.
"ENTER" and "CODE" will appear in the display, asking you to
input the code.
NOTE
All the steps in this procedure (1 through 7) must be completed
before the code security function can be turned on. However,
once the procedure is finished, it need not be repeated.
Once the code security function has been activated, "Security"
disappears from the MENU system. Note that it will no longer be
possible to cancell this function afterwards.
NOTE
1 Press the SRC button repeatedly to select the standby mode.
If you input an incorrect security code, the code setting mode will
be cancelled automatically. Follow the steps from 3 to 7 above
again.
"ALL OFF" is displayed when the standby mode is selected.
2 Hold down the MENU button for one second or more.
"MENU" is displayed first and then "Security" is displayed.
If you press the RESET button or remove the battery:
The first time you turn the unit on again, "CODE" will appear in
the display, asking you to input the security code.
Repeat steps 6 and 7 above, and input the security code.
You can start operating the unit again when "APPROVED"
appears in the display.
3 Hold down either the 4 or ¢ button for one second or
more.
"ENTER" will appear in the display for one second, indicating
the code setting mode has been entered. When "CODE"
appears in the display, you can start inputting the code.
NOTE
4 Press the preset button and enter your security code.
Use the security code shown on your Car Audio Passport.
Example: Enter "3510" as your code, pressing the buttons as
follows:
If you enter the wrong code, "Waiting" is displayed and you
cannot make further input of the code for a fixed interval (see
table below), which grows longer each time you enter the wrong
code.
# Times
When "CODE" is displayed, you can make input again.
Step
Button to press
Display
pressed
Number of wrong
inputs
Interval until next input
is allowed
1
2
3
4
#1
#2
#3
#4
4
“3”
“5”
“1”
“0”
6
2
1
1
2
3
4
-
5 minutes
1 hour
24 hours
5 Hold down the DISP button for three seconds or more.
The security code will be set.
The number of wrong inputs is displayed.
— 39 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
Touch SensorTone
Calendar Adjustment
This function produces a beep sound that accompanies button
operation. It can be switched on or off.
Adjust the date for the unit so that you can use the calendar
function.
Egnlish
Display and setting:
Display and setting:
"Beep ON" : Beep setting is on. (Default setting)
"Beep OFF" : Beep setting is off.
1 Select the display "Date Adjust" during the selecting function in
the menu system.
NOTE
2 Hold down either the 4 or ¢ button for one second or
more to enter the Calendar adjustment mode.
The date display will blink.
The beep sound is not output from the preout jacks.
3 Selecting the item (day, month, or year) to adjust
Press the 4 or ¢ button.
The item blinking in the display can be adjusted.
4 Adjusting the date
ManualTime Adjustment
Adjust the time manually.
Press the FM or AM button.
The item of the date blinking in the display will change.
NOTE
5 Press the MENU button to end the Calendar Adjustment mode.
This adjustment is available only when the automatic time
adjustment is set to off. (page 41)
Display and setting:
1 Select the display "Clock Adjust" during the selecting function
in the menu system.
2 Hold down either the 4 or ¢ button for one second or
more to enter the Manual time adjustment mode.
The time display will blink.
Calendar Mode
You can set the date formats of the calendar function.
Display and setting:
3 • Adjusting the hours
1 Select the display "Date Mode" during the selecting function in
Press the FM button to advance the hours, or press the AM
button to make the hours go back.
the menu system.
• Adjusting the minutes
2 Press the 4 and ¢ button to select the date format you
want to show in the display.
Press the ¢ button to advance the minutes, or press the
4 button to make the minutes go back.
The sample of the date format for today is displayed.
4 Press the MENU button to end the Manual Time Adjustment
mode.
Exiting the Manual Time Adjustment mode would start the
clock counting.
— 40 —
Download from Www.Somanuals.com. All Manuals Search And Download.
AutomaticTime Adjustment
1 Select the display "Icon/Speana Select" during the selecting
function in the menu system.
With automatic time adjustment, you can set the clock time
automatically according to time data sent from RDS stations
(after receiving RDS signals for several minutes). You can also
set the time manually if the automatic time adjustment
function is turned off.
2 Pressing the 4 or ¢ button switches the Icon/Spectrum
analyzer.
Display and setting:
"SYNC ON" : Automatic time adjustment (Default setting)
"SYNC OFF" : Manual time adjustment
Font Select
You can change the font used on the display.
AdjustingTime Automatically:
Tune into an RDS station for 3 or 4 minutes.
The time adjusts automatically to the correct local time.
Display and setting:
1 Select the display "Font Select" during the selecting function in
NOTE
the menu system.
The time is not adjusted when the RDS station you are tuned to
is not transmitting a time signal. Choose another RDS station in
such a case.
2 Pressing the 4 or ¢ button switches the font on the
display.
Dimmer
You can dim the display.
Disabled System Indicator (DSI)
A red indicator blinks on the unit after the faceplate is
removed, warning potential thieves.
NOTE
The dimmer function is not available for units if the dimmer cable
is not connected.
Display and setting:
"DSI ON" : The disabled system indicator is on. (Default setting)
"DSI OFF" : The disabled system indicator is off.
Display and setting:
"Dimmer ON" : The dimmer setting is on. (Default setting)
"Dimmer OFF" : The dimmer setting is off.
Icon/Spectrum analyzer Select
This function permits switching of the spectrum analyzer
display.
Display and setting:
— 41 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
System Q
Switching Dual Zone System Output
When this system is set to on, the System Q factors (Bass
centre frequency, Bass quality factor, Bass extend, Middle
centre frequency, Middle quality factor, andTreble centre
frequency) appear during the audio control mode.
You can select the speaker output, either front or rear, for the
TV(AUX) source.
Egnlish
Display and setting:
"Zone 2 Rear" : Output from the rear speaker (Default setting)
"Zone 2 Front" : Output from the front speaker
Display and setting:
"System Q ON" : The System Q factors appear and can be
adjusted. (Default setting)
NOTE
Not available during the Dual zone system is on.
"System Q OFF" : The System Q factors do not appear.
External Amp Control
Adjust the bass boost level of the external amplifier using the
main unit.
Switching preout
Switch the preout between the rear and non-fading. When you
switch to non-fading, you can adjust the volume separately.
Display and setting:
Display and setting:
"AMP Bass Flat" : Bass boost level is flat. (Default setting)
"AMP Bass +6" : Bass boost level is low (+6dB).
"AMP Bass +12" : Bass boost level is high (+12dB).
"SWPRE Rear" : Rear preout (Default setting)
"SWPRE N-Fad" : Non-fading preout
NOTE
NOTE
You cannot use the high-pass filter with non-fading preout.
As of December 2000, the power amplifiers controllable by the
main unit are as follows:
KAC-X501F/PS501F/X401M/PS401M/X301T/PS301T/X201T/PS201T
Built-in Amp Mute Control <In Standby mode>
Toggles on or off the mute control on the built-in amplifier.
Turning on this control enhances the preout quality.
News Bulletin Function with PTY NewsTimeout
Setting
Display and setting:
"Builtin AMP Mute ON" : Built-in Amp Mute is ON.
"Builtin AMP Mute OFF" : Built-in Amp Mute is OFF. (Default
setting)
You can arrange to have news bulletins interrupt your current
listening source, including other radio stations. When the
News Bulletin function is on, the PTY NewsTimeout setting
allows you to set the interval during which further news
interruption cannot take place. You can adjust the PTY news
interruption period from 10 to 90 minutes for each journey.
— 42 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Display and setting:
Auto Memory Entry <InTuner mode>
"News OFF" (Default setting), "News 00min" – "News 90min"
(min= minutes)
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to 6 frequencies can be stored this way.
: When you select the news interruption timeout interval, the
News function turns on and the NEWS indicator lights up.
When a news bulletin is received, "NEWS" will be displayed
and reception will begin at the preset volume.
NOTE
Display and setting:
• If you choose the "20min" setting, further news bulletins will not
be received for 20 minutes once the first news bulletin is
received.
• This function is only available if the desired station sends PTY-
code for news bulletin or belongs to <Enhanced Other
Network>-Network sending PTY-code for news bulletin.
• If you turn on the news bulletin function in the MW/LW band,
the band is switched automatically to the FM band.
However, the MW/LW band is not returned to when you turn off
the function.
1 Select the display "Auto-Memory" during the selecting function
in the menu system.
2 Hold down either the 4 or ¢ button for two seconds or
more to start auto memory function.
The numbers of the preset station buttons showed in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
NOTE
• When the AF function is turned on whilst auto memory entry
takes place, only RDS stations (i.e., stations with RDS
capability) are stored. RDS stations that have been preset for
FM1 cannot also be preset in FM2 or FM3.
• When the local seek function is turned whilst auto memory
entry takes place, stations with poor reception are not stored.
• When the Traffic Information function is on, only the local traffic
information station frequency will be stored.
Local Seek Function <InTuner mode>
With the local seek function turned on, auto seek tuning skips
stations with relatively poor reception.
Display and setting:
Cancelling Auto Memory Entry During Its Operation:
Press the 4 / ¢ button whilst auto memory entry is taking
place to stop the process.
"Local.S ON" : The local seek function is on.
"Local.S OFF" : The local seek function is off. (Default setting)
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
SelectingTuning Mode <InTuner mode>
You can choose from three tuning modes: auto seek, preset
station seek, and manual.
Display and setting:
"Seek Mode Auto1" : Auto seek tuning mode (Default setting)
"Seek Mode Auto2" : Preset station seek tuning mode
"Seek Mode Manual" : Manual tuning mode
— 43 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu settings
AF (Alternative Frequency) Function
AutoTP Seek Function
When poor reception is experienced, automatically switch to
another frequency broadcasting the same programme in the
same RDS network with better reception.
When theTI function is on and poor reception conditions are
experienced when listening to a traffic information station,
another traffic information station with better reception will be
searched for automatically. This function is on, when unit is
first powered on.
Egnlish
The RDS indicator lights up when the AF function is turned on.
Display and setting:
"AF ON" : The AF function is on. (Default setting)
"AF OFF" : The AF function is off.
Display and setting:
"ATPS ON" : The Auto TP Seek Function is on.
If the traffic information station you are tuned to
experiences poor reception, this function
automatically seeks another TP station. (Default
setting)
NOTE
When no other stations with stronger reception are available for
the same programme in the RDS network, you may hear the
incoming broadcast in bits and snatches. Turn off the AF function
in such a case.
"ATPS OFF" : The Auto TP Seek Function is off.
Monaural Reception
<In FM reception ofTuner mode>
Restricting RDS Region (Region Restrict Function)
You can choose whether or not to restrict the RDS channels,
received with the AF function for a particular network, to a
specific region. When the Region Restrict Function is on, the
region is restricted.
When poor stereo reception is experienced, this function will
reduce noise and improve listening conditions.
Display and setting:
"MONO ON" : The monaural reception is on.
"MONO OFF" : The monaural reception is off. (Default setting)
Display and setting:
"Regional ON" : The Region Restrict Function is on. (Default
setting)
"Regional OFF" : The Region Restrict Function is off.
NOTE
Sometimes stations in the same network broadcast different
programmes or use different programme service names.
Reading the MP3 ID3 tag <in MP3 mode>
ID3 tag information in the MP3 file is configured for use.
Display and setting:
"ID Read ON" : ID3 tag is read. (Default setting)
"ID Read OFF" : ID3 tag is not read.
NOTE
• If you switch this setting during the play of MP3, the track is
replayed from the beginning.
— 44 —
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you turn the ID3 tag read ON, beginning of the play is delayed
for reading process of each tag for the tune.
Built-in AUX Control
The "Built-in AUX Control" determines whether you include the
TV(AUX) factor in the cycle-through items in the "Switching
Modes" (page 11) function.
Display and setting:
"Builtin AUX ON" : The TV(AUX) factor apears. (Default setting)
"Builtin AUX OFF" : The TV(AUX) factor does not apear.
NOTE
Text Scroll
This function permits the CD text, MD title, folder/file name
and ID3 tag(Song title, Artist, Album) to be scrolled and the
entire text to be displayed. Switching between manual
scrolling and automatic scrolling is permitted.
Not available during the Dual zone system is on.
Display and setting:
"Scroll Auto" : Automatic scrolling
"Scroll Manual" : Manual scrolling (Default setting)
Power OFFTimer
Set the time for the OFFTimer function activated when you
selected Standby mode.
If the predefined time elapses, this unit's power is
automatically turned off.
Display and setting:
"OFF – – – –" : Power OFF Timer function is cancelled.
"OFF 20min" : Unit's power goes OFF after 20 minutes.
(Default setting)
"OFF 40min" : Unit's power goes OFF after 40 minutes.
"OFF 60min" : Unit's power goes OFF after 60 minutes.
NOTE
The Power OFF Timer function is enabled only after the security
code (page 39) is set up.
— 45 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations of remote control
2CAUTION
Do not set the remote control on hot places such as above the
dashboard.
Egnlish
Loading and Replacing the Batteries:
Use one lithium battery (CR2025).
Remove the case following the instructions as illustrated.
Keep on slide
1
2
Pull out
Insert the batteries with the + and – poles aligned properly,
following the illustration inside the case.
2WARNING
Store unused batteries out of the reach of children. Contact a
doctor immediately if the battery is accidentally swallowed.
Basic operations
• VOL buttons
Press the 5 button to turn the volume up.
Press the ∞ button to turn the volume down.
• SRC button
Each time you press the SRC button, the mode switches as
follows:
— 46 —
Download from Www.Somanuals.com. All Manuals Search And Download.
▼
Tuner features
Tuner mode
▼
•
4/¢ buttons
CD/MP3 mode
Press the 4 button to make decreasing seeks (using the
preset tuning mode).
▼
External disc control mode 1
Press the ¢ button to make increasing seeks (using the preset
▼
tuning mode).
External disc control mode 2 / AUX mode
▼
• AM/FM buttons
TV(AUX)
Press the AM button to select the MW and LW bands.
Press the FM button to select and switch between FM1, FM2,
and FM3 bands.
▼
Standby mode
• DIRECT/OK button
During Preset station seek with programme service name mode,
selects station.
NOTE
• The mode switches to the next mode from any mode which
cannot be used.
• The external disc control mode will differ depending on the unit
that is connected.
• You cannot use the AUX input function of the optional switching
adapter KCA-S210A if this unit is connected with the KCA-
S210A.
Enters and cancells the Direct access tuning mode.
• DNPP button
Enters and cancells the Preset station seek with programme
service name mode.
•
38 button
Enters and cancells the Programme Type Selection (PTY) mode.
• If you have selected Standby mode, the timer function that
turns the power off automatically will be activated.
To find out how to set the time on the timer, and how to cancel
the timer function, refer to the section on the Power OFF Timer
function under Menu settings (page 45).
The Power OFF Timer function is enabled only after the security
code (page 39) is set up.
• Number/letter entry buttons
Press buttons #1-6 to recall preset stations.
Use to enter frequency of the desired station during Direct
access tuning mode.
• ATT button
Turns down the volume quickly. To return the volume to its
original level, press the button again. Turning the volume up, or
turning it all the way down deactivates the attenuator function.
— 47 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations of remote control
CD/MP3/External disc control features
•
4/¢ buttons
Press the 4 button to search through the tracks and files
backward.
Egnlish
Press the ¢ button to search through the tracks and files
forward.
Used to move the cursor whilst entering disc name.
• DISC buttons
(for disc changers and media containing MP3 files)
Press the DISC– button to search through the discs and folders
backward.
Press the DISC+ button to search through the discs and folders
forward.
Selects numbers and symbols whilst entering disc name.
•
38 button
When a disc is playing, this button pauses the play.
Press the same button again to start play again.
Selects the type of characters at the time of entering the disc
name.
• OK button
During disc name input, stores the already input data in memory
and ends the input mode.
Selects disc during the disc name preset play mode.
• DNPP button (for disc changers)
Enters and cancells the Disc Name Preset Play mode.
• Number / letter entry buttons
Used to specify the track (disc) number used in direct track (disc)
searches.
Use to enter letters during disc name preset.
— 48 —
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Connect the wiring harness connector to the unit.
7. Install the unit in your car.
Accessories
External view
......... Number of items
8. Reconnect the - terminal of the battery.
9. Press the reset button.
1
2
3
..........................1
2CAUTION
..........................2
..........................1
..........................1
• If your car is not prepared for this special connection-system,
consult your KENWOOD dealer.
• Only use antenna conversion adapters (ISO-JASO) when the
antenna cord has an ISO plug.
• Make sure that all cable connections are securely made by
inserting jacks until they lock completely.
• If your vehicle's ignition does not have an ACC position, or if
the ignition cable is connected to a power source with constant
voltage such as a battery cable, the power will not be linked
with the ignition (i.e., it will not turn on and off along with the
ignition). If you want to link the unit's power with the ignition,
connect the ignition cable to a power source that can be turned
on and off with the ignition key.
4
2CAUTION
• If the fuse blows, first make sure that the cables have not
caused a short circuit, then replace the old fuse with one with
the same rating.
• Do not let unconnected cables or terminals touch metal on the
car or anything else conducting electricity. To prevent short
circuits, also do not remove the caps on the ends of the
unconnected cables or the terminals.
The use of any accessories except for those provided might
result in damage to the unit. Make sure only to use the
accessories shipped with the unit, as shown above.
• Connect the speaker cables correctly to the terminals to which
they correspond. The unit may receive damage or fail to work if
you share the - cables and/or ground them to any metal part
in the car.
• After the unit is installed, check whether the brake lamps,
indicators, wipers, etc. on the car are working properly.
• Insulate unconnected cables with vinyl tape or other similar
material.
• Some disc changers need conversion cables for connection.
See the section on "Safety Precautions" for details.
• If the console has a lid, make sure to install the unit so that the
faceplate does not hit the lid when closing and opening.
• Mount the unit so that the mounting angle is 30° or less.
Installation Procedure
1. To prevent short circuits, remove the key from the ignition and
disconnect the -terminal of the battery.
2. Make the proper input and output cable connections for each
unit.
3. Connect the cable on the wiring harness.
4. Take Connector B on the wiring harness and connect it to the
speaker connector in your vehicle.
5. Take Connector A on the wiring harness and connect it to the
external power connector on your vehicle.
— 49 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Cables toTerminals
Rear right output/ Non-fading right output (Red)
Rear left output/ Non-fading left output (White)
Connector Function Guide
Pin Numbers for
ISO Connectors
Cable Colour
Functions
Front right output (Red)
Front left output (White)
Egnlish
External Power
Connector
A–4
A–5
A–6
A–7
A–8
Yellow
Blue/White
Orange/White Dimmer
Red
Battery
Power Control
AUX right input (Red)
AUX left input (White)
Ignition (ACC)
Earth (Ground)
Connection
Black
Antenna Conversion Adaptor (ISO–JASO) (Accessory3)
Fuse(10A)
Speaker
Connector
Antenna Cord (ISO)
FM/AM antenna input
B–1
B–2
B–3
B–4
B–5
B–6
B–7
B–8
Purple
Purple/Black
Gray
Gray/Black
White
White/Black
Green
Rear Right (+)
Rear Right (–)
Front Right (+)
Front Right (–)
Front Left (+)
Front Left (–)
Rear Left (+)
Rear Left (–)
To KENWOOD disc changer/ DAB control input
KPA-SD100/KPA-HD100/KPA-SS100
Wiring harness
(Accessory1)
NOTE
To connect these leads, refer to the relevant
instruction manuals.
External amplifier control cable
Green/Black
(Pink / Black)
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
EXT.
Battery cable (Yellow)
CONT.
TEL mute cable (Brown)
Ignition cable (Red)
Connect to the terminal that is grounded
when either the telephone rings or during
conversation.
TEL MUTE
NOTE
To connect the KENWOOD navigation
system, consult your navigation manual.
Connect either to the power control terminal
when using the optional power amplifier, or to
the antenna control terminal in the vehicle.
A–7 Pin (Red)
Power control/ Motor antenna
control cable (Blue/White)
P.CONT
A–4 Pin (Yellow)
Connector A
ANT.
CONT.
8
7
6
5
4
3
2
1
NOTE
If no connections are
made, do not let the cable
come out from the tab.
8
7
6
5
4
3
2
1
Connector B
— 50 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■
2WARNING
Installation
Connecting the ISO Connector (see p.50)
The pin arrangement for the ISO connectors depends on the
type of vehicle you drive. Make sure to make the proper
connections to prevent damage to the unit.
Firewall or metal support
The default connection for the wiring harness is described in 1
below. If the ISO connector pins are set as described in 2 or 3,
make the connection as illustrated.
Screw (M4X8)
(commercially
available)
1 (Default setting) The A-7 pin (red) of the vehicle's ISO
connector is linked with the ignition, and the A-4 pin (yellow)
is connected to the constant power supply.
Unit
Vehicle
Ignition cable (Red)
A–7 Pin (Red)
Bend the tabs of the
mounting sleeve with
a screwdriver or
Battery cable (Yellow)
A–4 Pin (Yellow)
Self-tapping
screw
(commercially
available)
similar utensil and
attach it in place.
Metal mounting
strap
(commercially
available)
2 The A-7 pin (red) of the vehicle's ISO connector is connected
to the constant power supply, and the A-4 pin (yellow) is
linked to the ignition.
NOTE
Unit
Vehicle
Make sure that the unit is installed securely in place. If the unit
is unstable, it may malfunction (eg, the sound may skip).
Ignition cable (Red)
A–7 Pin (Red)
Battery cable (Yellow)
A–4 Pin (Yellow)
3 The A-7 pin (red) of the vehicle's ISO connector is not
connected to anything, whilst the A-4 pin (yellow) is connected
to the constant power supply (or both the A-7 (red) and A-4
(yellow) pins are connected to the constant power supply).
Unit
Vehicle
Connect to a power source that can be
turned on and off with the ignition key.
Ignition cable (Red)
2CAUTION
To attach this unit, make sure the front of the control panel faces
you and fit it into the mounting sleeve by pressing the four corners
of the hard rubber frame at the same time.
Battery cable (Yellow)
A–4 Pin (Yellow)
Do not apply strong pressure to other sections than the corners;
otherwise troubles such as the impossibility of opening or closing
the panel may result.
— 51 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
■
■
Removing the hard rubber frame
Removing the Unit
1
Refer to the section “Removing the hard rubber frame” and
then remove the hard rubber frame.
1
Engage the catch pins on the removal tool and remove the
two locks on the lower level.
Lower the frame and pull it forward as shown in the figure.
2
3
Remove the screw (M4´8) on the back panel.
Egnlish
Insert the two removal tools deeply into the slots on each
side, as shown.
Catch
Lock
Accessory2 Removal tool
Screw (M4X8)
(commercially
available)
Accessory2 Removal tool
2
When the lower level is removed, remove the upper two
locations.
4
Lower the removal tool
toward the bottom, and pull
out the unit halfway whilst
pressing towards the
inside.
2CAUTION
Be careful to avoid injury from the catch pins on the removal tool.
5
Pull the unit all the way out
with your hands, being
careful not to drop it.
NOTE
The frame can be removed from the top side in the same
manner.
— 52 —
Download from Www.Somanuals.com. All Manuals Search And Download.
■
Screwing the Faceplate on the Unit
If you want to fasten the faceplate to the main unit so that it
does not fall off, screw in the provided screw (M2 ´ 3 mm) in
the hole shown below.
Accessory4
2CAUTION
Never insert the provided screw (M2 ´ 3 mm) in any other
screw hole than the one specified. If you screw it in another
hole, it will contact and may cause damage to the mechanical
parts inside the unit.
— 53 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring.
Before calling service, first check the following table for possible problems.
PROBLEM
POSSIBLE CAUSE
SOLUTION
The power does not turn on.
The fuse has blown.
After checking for short circuits in the cables, replace the
fuse with one having the same rating.
Egnlish
No ACC position on vehicle ignition.
Connect the same cable to the ignition as the battery cable.
If you have selected Standby
mode, the power will go OFF
automatically.
The Power Off Timer function has been activated.
If you do not want the power to go OFF automatically,
cancel the Power Off Timer function.
Nothing happens when the
buttons are pressed.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see page 4).
Radio reception is poor.
The car antenna is not extended.
Pull out the antenna all the way.
The antenna control cable is not connected.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The memory is erased when
the ignition is turned off.
The battery cable has not been connected to the proper
terminal.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The ignition and battery cable are incorrectly connected.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The TEL mute function does
not work.
The TEL mute cable is not connected properly.
Connect the cable correctly, referring to the section on
"Connecting Cables to Terminals".
The TEL mute function turns on
even though the TEL mute
cable is not connected.
The TEL mute cable is touching a metal part of the car.
Pull the TEL mute cable away from the metal part of the
car.
Free switching of the sound
quality.
The system Q function is set on Scan mode.
The system Q function is set on Scan mode.
"Built-in AUX Control" is turned off.
Refer to the “System Q” page and switch it to a function
other than Scan mode. (see p. 16).
Audio control setting cannot be
achieved.
Refer to the “System Q” page and switch it to a function
other than Scan mode.(see p. 16).
TV (AUX) cannot be selected.
Refer to the "Built-in AUX Control" in the menu setting
(page 45) and turn on the "Built-in AUX Control" .
— 54 —
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No sound can be heard, or the
volume is low.
The Attenuator function is turned on.
Turn off the Attenuator function.
The fader and/or balance settings are set all the way to
one side.
Reset the fader and/or balance settings.
The input/output cables or wiring harness are connected
incorrectly.
Reconnect the input/output cables and/or the wiring
harness correctly. See the section on "Connecting Cables
to Terminals".
"Built-in Amp Mute Control" is turned on.
Refer to the "Built-in Amp Mute Control" in the menu
setting (page 42) and turn off the "Built-in Amp Mute
Control" .
A speaker cable may be pinched by a screw in the car.
The speakers are not wired correctly.
Check the speaker wiring.
The sound quality is poor or
distorted.
Reconnect the speaker cables so that each output
terminal is connected to a different speaker.
A CD ejects as soon as it is
loaded.
The CD is upside-down.
The CD is quite dirty.
Load the CD with the labelled side up.
Clean the CD, referring to the section on "Cleaning CDs"
(see page 6).
The sound skips on a CD.
The CD is scratched or dirty.
Clean the CD, referring to the section on "Cleaning CDs"
(see page 6).
The specified track does not
play.
Random play has been selected.
Turn off the random play function.
Can’t remove disc.
The cause is that more than 10 minutes has elapsed
since the vehicle ACC switch was turned OFF.
The disc can only be removed within 10 minutes of the
ACC switch being turned OFF. If more than 10 minutes
has elapsed, turn the ACC switch ON again and press
the Eject button.
— 55 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
CD/MP3/External disc control mode
PROBLEM
POSSIBLE CAUSE
SOLUTION
The disc control mode cannot
be selected.
No cable has been connected to the disc changer input
terminal on the unit.
Connect the cable to the disc changer input terminal on
the unit.
Egnlish
The specified disc does not
play, but another one plays
instead.
The specified CD is very dirty.
Clean the CD.
The CD is upside-down.
Load the CD with the labelled side up.
The disc is loaded in a different slot from that specified.
Eject the disc magazine and check the number for the
specified disc.
The disc is severely scratched.
Try another disc instead.
The sound skips.
Something is touching the disc changer.
The CD is scratched or dirty.
Remove whatever is touching it.
If skipping happens at the same place when the car is
stopped, something is wrong with the CD. Clean the CD.
The display shows that the
changer is being played, but no
sound can be heard.
The computer chip in the unit is not functioning normally.
Press the reset button on the unit (see page 4).
Turn off the random play or magazine random play
function.
The specified track does not
play.
Random play or magazine random play has been
selected.
Track repeat, disc repeat, track
scan, random play, and
magazine random play start by
themselves.
The setting is not cancelled.
The settings for these functions remain on until the
setting to off or the disc ejected, even if the power is
turned off or the source changed.
Cannot play CD-R or CD-RW.
Finalization processing is not being conducted for CD-
R/CD-RW.
Conduct finalization processing with CD recorder.
A non-compatible CD changer is being used to play the
CD-R/CD-RW.
Use a CD changer compatible with CD-R/CD-RW to play.
If the following situations, consult your nearest service centre:
• Even though the disc changer is connected, the Disc Changer Mode is not on, with "AUX" showing in the display during the Changer Mode.
• Even though no device (CA-C1AX, KDC-CPS87, KDC-CX87, KDC-CPS85, KDC-CX85, KDC-CPS82 or KDC-CX82) is connected, the AUX Mode is entered when
switching modes.
— 56 —
Download from Www.Somanuals.com. All Manuals Search And Download.
SOLUTION
PROBLEM
POSSIBLE CAUSE
Cannot play an MP3 file.
Not conforming to ISO 9660 Level 1/2.
Use a medium conforming to ISO 9660 Level 1/2.
The MP3 file has no or invalid file name extension.
The media is scratched or dirty.
Add the ".MP3" extension to the MP3 file name.
Clean the media, referring to the section on "Cleaning
CDs" (see p.6).
Noise or no sound generated
when an MP3 file is played.
The file has the MP3 file name extension while it is not
an MP3 file.
Do not use the ".MP3" extension in non-MP3 files.
Takes time before the unit
starts playing MP3 files.
The medium contains many folders, files, and hierarchical
levels.
The unit checks all files on the loaded medium first. If
the medium has many files recorded, it may take a long
time for the unit before it starts playing MP3 files.
Fails to play MP3 files in the
intended order.
The MP3 files were not written by the CD writer in the
order in which you wanted them to be played.
Depending on the CD writer, you may be able to set the
order in which MP3 files are to be played by writing
them onto a medium with their file names beginning
with play sequence numbers such as "01" to "99".
The sound skips when an MP3
file is being played.
The media is scratched or dirty.
Clean the media, referring to the section on "Cleaning
CDs" (see p.6).
— 57 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
The following messages are displayed when certain problems are occurring in your system. Take the
recommended actions.
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Eject
] Load the disc magazine properly.
No CD in the unit.
] Insert the CD.
Egnlish
No disc has been loaded in the disc magazine.
] Load a disc into the disc magazine.
No Disc
No disc has been loaded in the disc magazine.
] Load a disc into the disc magazine.
TOC Error
The CD is very dirty. The CD is upside-down. The CD is scratched a lot.
] Clean the CD and load it correctly.
Nothing has been recorded on the MD.
Blank Disc
No Tr Disc
NO PANEL
No tracks are recorded on the MD, although it has a title.
The faceplate of the slave unit being connected to this unit has been removed.
] Replace it.
The unit is malfunctioning for some reason.
] Press the reset button on the unit. If the "E- 77", code does not disappear, consult your nearest service centre.
E-77
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
] Check the disc magazine. And then, press the reset button on the unit.
Mecha Error
If the "Mecha Error" code does not disappear, consult your nearest service center.
The protective circuit in the unit activates when the temperature inside the automatic disc changer exceeds 60°C (140°F),
Hold Error
IN
stopping all operation.
] Cool down the unit by opening the windows or turning on the air conditioner. As the temperature falls below 60°C (140°F),
the disc starts playing again.
If this indicator blinks, the CD player is malfunctioning.
] Eject the CD and try inseting it again.
If the CD cannot be ejected, press the eject button and hold it in until the CD is ejected.
— 58 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications subject to change without notice.
FM tuner section
Audio section
Frequency range (50 kHz space) ...............87.5 MHz – 108.0 MHz
Usable sensitivity (S/N = 26dB) .................................0.7 µV/75 ½
Quieting Sensitivity (S/N = 46dB) ..............................1.6 µV/75 ½
Frequency response ( 3.0 dB) ..............................30 Hz – 15 kHz
Signal to Noise ratio (MONO)..............................................65 dB
Selectivity (DIN) ( 400 kHz) .............................................³ 80 dB
Stereo separation (1 kHz) ....................................................35 dB
Maximum output power.................................................47 W ´ 4
Full Bandwidth Power (DIN 45324, +B=14.4V) ...............22 W ´ 4
Tone action
Bass :...........................................................100 Hz 10 dB
Middle :..........................................................1 kHz 10 dB
Treble : .........................................................10 kHz 10 dB
Preout level / Load (during disc play)....................1800 mV/10 k½
Preout impedance.............................................................²600 ½
MW tuner section
Frequency range (9 kHz space)......................531 kHz – 1611 kHz
Usable sensitivity (S/N = 20dB) ...........................................25 µV
General
Operating voltage (11 – 16V allowable)................................14.4 V
Current consumption.............................................................10 A
Installation Size (W x H x D) ..........................182 ´ 53 ´ 156 mm
Weight.................................................................................1.8 kg
LW tuner section
Frequency range..............................................153 kHz – 281 kHz
Usable sensitivity (S/N = 20dB) ...........................................45 µV
CD player section
Laser diode ....................................................GaAlAs (l=780 nm)
Digital filter (D/A)......................................8 Times Over Sampling
D/A Converter ...............................................................8 level DS
Spindle speed (CD-DA) .................................500 – 200 rpm (CLV)
(MP3) ..................................1000 – 400 rpm (CLV)
Wow & Flutter ........................................Below Measurable Limit
Frequency response ( 1 dB) .................................10 Hz – 20 kHz
Total harmonic distortion (1 kHz) ......................................0.01 %
Signal to Noise ratio (1 kHz) ................................................96 dB
Dynamic range ....................................................................95 dB
Channel separation..............................................................90 dB
MP3 decode...................Compliant with MPEG-1.0 Audio Layer-3
— 59 —
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|