Thank you for purchasing this KENWOOD product.
To obtain the best performance from this product, please
read this manual carefully. It will guide you in operating your
KENWOOD product.
MICRO HI-FI COMPONENT SYSTEM
HM-233 Micro HI-FI Component System consisting of RD-M23
(main unit) and LS-M23 (speaker system).
HM-233
INSTRUCTION MANUAL
KENWOOD CORPORATION
B60-5125-08 00 CH (T) 0105
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Notes
Contents
Page
WARNINGS
l When the ON/STANDBY button is set at STANDBY position, mains voltage is still
present inside the unit. When the ON/STANDBY button is set at STANDBY posi-
tion, the unit may be brought into operation by the timer mode or remote control.
l This unit contains no user serviceable parts. Never remove covers unless qualified
to do so. This unit contains dangerous voltages, always remove mains plug from
the socket before any service operation and when not in use for a long period.
l To prevent fire or shock hazard, do not expose this appliance to dripping or splash-
ing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
n General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 5
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Controls and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 9
n Preparation for Use
System Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 11
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CAUTION
l Use of controls, adjustments or performance of procedures other than those spec-
ified herein may result in hazardous radiation exposure.
l As the laser beam used in this compact disc player is harmful to the eyes, do not
attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
n Basic Operation
General Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Sound Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
n CD Playback
Listening to a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 17
Repeat or Random Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Programmed Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
n Radio
Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Listening to the memorised station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
t
NOTE
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.
t
n Advanced Features
Timer and Sleep Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22, 23
EnhancingYour System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Impor
n References
Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25, 26
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
l Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
n General
l Please ensure that the equipment is positioned in a well-ventilated area and that
there is at least 10 cm (4") of free space along the sides and back. There must
also be a minimum of 30 cm (12") of free space on the top of the unit.
l Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your lo-
cal KENWOOD service facility.
10 cm (4")
10 cm (4")
30 cm (12")
10 cm (4")
l The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
l Use the unit on a firm, level surface free from vibration.
ormatin
l No naked flame sources, such as lighted candles, should be placed on the appa-
ratus.
l Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generates electrical noise.
-
l Attention should be drawn to the environmental aspects of battery disposal.
l The apparatus is designed for use in moderate climate.
l This unit should only be used within the range of 5˚C - 35˚C (41˚F - 95˚F).
Warnings:
l The voltage used must be the same as that specified on this unit. Using this prod-
uct with a higher voltage other than that which is specified is dangerous and may
result in a fire or other type of accident causing damage. KENWOOD will not be
held responsible for any damage resulting from use of this unit with a voltage other
than that which is specified.
G
l Do not place anything on top of the unit.
l Do not expose the unit to moisture, to temperatures higher than 60˚C (140˚F) or to
extremely low temperatures.
l If your system does not work properly, disconnect the AC power lead from the wall
socket. Plug the AC power lead back in, and then turn on your system.
l CD players use a laser pickup which can damage the eyes if viewed directly.
Do not look at the pickup, and do not touch the pickup directly.
l In case of an electrical storm, unplug the unit for safety.
n Volume control
The sound level at a given volume setting depends on speaker efficiency, location,
and various other factors. It is advisable to avoid exposure to high volume levels,
which occurs whilst turning the unit on with the volume control setting up high, or
whilst continually listening at high volumes.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Please confirm that the following accessories are included.
n Care of compact discs
Compact discs are fairly resistant to damage, however mistracking can occur due to
an accumulation of dirt on the disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
l Do not write on either side of the disc, particularly the non-label side from which
signals are read. Do not mark this surface.
l Keep your discs away from direct sunlight, heat, and excessive moisture.
l Always hold the CDs by the edges. Fingerprints, dirt, or water on the CDs can
cause noise or mistracking. If a CD is dirty or does not play properly, clean it with a
soft, dry cloth, wiping straight out from the centre, along the radius.
AC power lead
1
Remote control
1
NO
YES
Correct
ormatin
"AAA" size battery (UM-4, R03, HP-16
or similar)
AM loop aerial
1
2
s
n
FM aerial
1
Note:
Only the above accessories are included.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
n Front panel
Reference page
1. CD Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
2. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
4. Function Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16, 20
5. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19, 21
6. Bass/Treble Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
7. CD Play or Pause,Tuning Up Button . . . . . . . . . . . . . . . . . . . . .16, 20
8. CD Stop,Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . .16, 20
9. CD Track Down or Fast Reverse,
7
10
11
8
9
1
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 21
10.CD Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
11.CD Track Up or Fast Forward,
s
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 21
ormatin
n Display
2
3
4
1. Timer Play Indicator
2. Sleep Indicator
i
3. CD Random Play Indicator
4. Memory Indicator
5. FM Stereo Mode Indicator
6. CD Play Indicator
7. CD Repeat Play Indicator
8. FM Stereo Receiving Indicator
5
6
r
l
1
4
2
3
5
8
6
7
6
Download from Www.Somanuals.com. All Manuals Search And Download.
n Rear panel
Reference page
1. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
2. AM Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
3. Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
4. FM 75 Ohms Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
5. CD Digital Output Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6. Video/Auxiliary (Audio Signal) Input Sockets . . . . . . . . . . . . . . . . . 24
7. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
8. AC Power Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11
5
6
1
2
7
8
3
4
s
ormatin
r
t
G
The rating label is located
on the bottom of the unit.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators (continued)
n Remote control
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
2. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
4. Tuner Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
5. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
6. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
7. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 19, 21
8. Dimmer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
9. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
10.Video/Auxiliary Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
11.Band Selector Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
12.Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
13.Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
14.Random/Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
15.CD Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
16.Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
17.CD Track Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
18.CD Fast Reverse, Tuning Down Button . . . . . . . . . . . . . . . . . . . . .17, 20
19.CD Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
20.CD Track Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
21.CD Fast Forward, Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . .17, 20
22.CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
23.CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
24.Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
25.Bass Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
26.Treble Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
1
10
2
3
11
12
16
17
4
5
13
14
15
20
21
18
6
7
8
s
19
22
ormatin
23 24
r
o
9
G
25
26
Buttons with " " mark in the illustration can be operated on the remote control
only.
Other buttons can be operated both on the main unit and the remote control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
n Speaker system
1. Tweeter
2. Woofer
3. Speaker Wire
n Placing the speaker system
There is no distinction between the right and the left speakers.
Left speaker
Right speaker
-
ormatin
1
2
a
Note:
The speaker grille is not removable.
3
t
G
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
FM aerial
AM loop aerial
Right speaker
Left speaker
orUse
VCR, DVD, etc.
s
f
Wall socket
(AC 230 V, 50 Hz)
not supplied
MD recorder
not supplied
10
Download from Www.Somanuals.com. All Manuals Search And Download.
n Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
n Speaker connection
Connect the black wire to the minus (-) terminal, and the red wire to the plus (+) ter-
minal.
Right speaker
Left speaker
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM and
GND terminals. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Notes:
l Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
l When static is still heard even after adjusting the position of the AM loop aerial, try
reversing the wire connections.
Red
orUse
Black
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Caution:
l Use speakers with an impedance of 8 ohms or more, as lower impedance speak-
ers can damage the unit.
l Do not mistake the right and the left channels. The right speaker is the one on the
right side when you face the unit.
l Do not let the bare speaker wires touch each other.
-
Wall
Screws (not supplied)
External FM or AM aerial:
Use an external FM or AM aerial if you require better reception. Consult your dealer.
P
External
FM aerial
External AM aerial
AM loop aerial
15 m (49 feet)
Incorrect
7.5 m (25 feet)
n Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power
lead to the AC power input socket, then plug the AC power lead of this unit into the
wall socket.
Earth rod
Notes:
Notes:
l When an external FM aerial is used, disconnect the supplied FM aerial wire from
l Unplug the unit if it will not be used for a prolonged period of time.
l Never use a power lead other than the one supplied. Otherwise, a malfunction or
an accident may occur.
the FM 75 OHMS socket.
l When using an external AM aerial, be sure to keep the wire of the AM loop aerial
connected.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
n Battery installation
1 Remove the battery cover.
n Test of the remote control
Face the remote control directly to the remote sensor on the unit.
2 Insert the batteries according to the direction indicated in the bat-
The remote control can be used within the range shown below:
Press the ON/STANDBY button. Does the power turn on? Now, you can enjoy the
music.
tery compartment.
When inserting or removing the batteries, push them towards the battery termi-
nals.
3 Replace the cover.
Remote sensor
Precautions for battery use:
0.2 m - 6 m
(8" - 20')
-
l Replace all old batteries with new ones at the same time.
l Do not mix old and new batteries.
orUse
l Remove the batteries if the unit will not be used for long periods of time. This will
prevent potential damage due to battery leakage.
Caution:
l Do not use rechargeable batteries (nickel-cadmium battery, etc.).
l Installing the batteries incorrectly may cause the unit to malfunction.
r
Notes concerning use:
l Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or similar).
l Periodically clean the transmitter on the remote control and the sensor on the unit
with a soft cloth.
P
l Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
l Keep the remote control away from moisture, heat, shock, and vibrations.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
General Control
n To turn the power on
Press the ON/STANDBY button to turn the power on.
To set the unit to stand-by mode:
Press the ON/STANDBY button again.
n To change the display brightness (2 levels)
You can switch the display brightness by pressing the DIMMER button on the remote
control.
Dimmed
Brightened
l
n Opening and closing the CD compartment
The CD compartment cover is motorised.
When the power is turned on, you can open or close the CD compartment cover by
pressing the OPEN/CLOSE button.
-GeneralContr
Caution:
l Do not stop or move the CD compartment cover manually. It may cause malfunc-
tions to the unit.
B
l Be careful not to jam your fingers in the CD compartment cover.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Control
n Adjusting the volume
Press the VOLUME button to increase the volume and the VOLUME button for
decreasing.
.....
28 29 MAX
MIN 1
2
n Adjusting the bass
Main unit operation:
1
2
Press the BASS/TREBLE button until "BASS" appears on the display.
Within 5 seconds, press the VOLUME ( or ) button to adjust the bass.
Remote control operation:
Press the BASS ( or ) button to adjust the bass.
l
...
...
-5
0
5
n Adjusting the treble
Main unit operation:
-SoundContr
1
2
Press the BASS/TREBLE button until "TRE" appears on the display.
Within 5 seconds, press the VOLUME ( or ) button to adjust the treble.
B
Remote control operation:
Press the TREBLE ( or ) button to adjust the treble.
...
...
-5
0
5
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Clock
3 Within 1 minute, press the PRESET ( or ) button to adjust the
hour and then press the MEMORY button.
l When the 12-hour display is selected, "AM" will change automatically to "PM".
4 Within 1 minute, press the PRESET ( or ) button to adjust the
minutes and then press the MEMORY button.
l The hour will not advance even if minutes advance from "59" to "00".
l The clock starts from "0" second. (Seconds are not displayed.)
k
To confirm the time display when the power is on:
Press the CLOCK button.
The time display will appear for about 5 seconds.
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
1 Press the CLOCK button and within 3 seconds, press the MEMO-
Note:
RY button.
The time will flash at the push of the CLOCK button when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
-SettingtheCloc
B
To readjust the clock:
Perform "Setting the Clock" from the beginning.
2 Within 1 minute, press the PRESET ( or ) button to select 24-
hour or 12-hour display and then press the MEMORY button.
To change the 24-hour or 12-hour display:
1
Clear all the programmed contents. [Perform to step 3 under "If trouble occurs" on
page 26 for details.]
Perform "Setting the Clock" from the beginning.
2
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it has been reset.
(Refer to step 3 under "If trouble occurs" on page 26.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button until "CD STOP" or "NO DISC" ap-
pears on the display.
When operating with the remote control, press the CD button.
3 Press the OPEN/CLOSE button to open the CD compartment.
4 Place a CD on the spindle, label side up.
Be sure to place 8 cm (3") disc in the middle of a disc holder.
12 cm (5")
8 cm (3")
k
y
5 Press the OPEN/CLOSE
button to close the CD
compartment.
Total number of tracks Total playing time
-ListeningtoaCD
CDPla
6 Press the / ( ) button
to start playback from
track 1.
When the last track on the disc has finished playing, the CD player will stop au-
tomatically.
To interrupt playback:
Main unit operation:
Press the
/
button.
To resume playback from the same point, press the
Remote control operation:
/
button again.
Press the button.
To resume playback from the same point, press the button.
To stop playback:
Press the button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the CD:
Whilst in the stop mode, press the OPEN/CLOSE button.
Press the CD eject button and remove the CD.
n To locate the beginning of a track
To move to the beginning of the next track:
Press the
button for less than 0.5 seconds during playback.
l You can skip to any track by pressing the
button re-
peatedly until the desired track number appears.
To restart the track being played:
Press the
button for less than 0.5 seconds during playback.
l You can skip to any track by pressing the
peatedly until the desired track number appears.
button re-
k
CD Eject Button
y
n To locate the desired portion
Notes:
l After removing the CD, make sure to press the OPEN/CLOSE button and close
the CD compartment.
l When the unit enters the stand-by mode, the opened CD compartment cover will
be closed automatically.
For audible fast forward:
Press and hold down the
button during playback.
-ListeningtoaCD
CDPla
After use:
Press the ON/STANDBY button to enter the power stand-by mode.
For audible fast reverse:
Caution:
Press and hold down the
button during playback.
l Do not stop or move the CD compartment cover manually. It may cause mal-
functions to the unit.
l Be careful not to jam your fingers in the CD compartment cover.
l If the power fails whilst the compartment is open, wait until the power is restored.
l If a disc is damaged, dirty, or loaded upside down, "NO DISC" or "READ ERR" will
appear on the display.
l Keep foreign objects out of the CD compartment.
Notes:
l Subjecting the unit to shock or vibration may cause mistracking.
l When the unit is not being used, be sure to close the CD compartment. If it is left
open, the lens may be covered with dust and the unit may not operate properly.
l If TV or radio interference occurs during CD operation, move the unit away from
the TV or radio.
l Normal playback will resume when the
or
button is released.
l When the end of the last track is reached during fast forward, "END" will appear on
the display and CD operation will be paused. When the beginning of the first track
is reached during fast reverse, playback will start when you release the
l The
button.
or
button on the remote control allows you to locate the desired por-
tion.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat or Random Play
You can select one of the CD playback mode; "Repeat play", "Random play" and
"Normal play".
1 When in the CD mode, press the RANDOM/REPEAT button on the
remote control repeatedly to select the playback mode.
Repeat playback mode
Random playback mode
-
k
Normal playback mode
2 Press the button to start playback.
y
To repeat a programmed sequence:
Perform steps 1 - 5 in the "Programmed Play" section and then select the repeat
playback.
Notes:
l In random play, the CD player will select and play tracks automatically. (You cannot
CDPla
select the order of the tracks.)
-
l If you press the
button during random play, you can move to the track selected
next by the random operation. On the other hand, the
button does not allow
you to move to the previous track. The beginning of the track being played will be
located.
Caution:
After performing repeat or random play, be sure to press the button. Otherwise, the
disc will play continuously.
To cancel repeat or random play:
Press the RANDOM/REPEAT button on the remote control repeatedly to select the
normal playback mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed Play
By specifying tracks from 1 to 99, you can choose up to 20 selections for playback in
the order you like.
3 Press the MEMORY/SET (MEMORY) button to save the track
number.
Playback order
Total playback time
4 Repeat steps 2 - 3 for other tracks. Up to 20 tracks can be pro-
grammed.
5 Press the
/
( ) button to start playback.
k
-
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is flashing.
Each time the button is pressed, one track will be
cleared, beginning with the last track pro-
grammed.
y
To cancel the programmed play mode:
Whilst in the stop mode and the "MEMORY" indi-
cator is lit, press the CLEAR button on the remote
control. The "MEMORY" indicator will disappear
and all the programmed contents will be cleared.
ogrammedPla
-Pr
CDPla
1 Whilst in the stop mode, press the MEMORY/SET (MEMORY) but-
ton to enter the programming save mode.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
2 Within 30 seconds, press the
track.
or
button to select the desired
l Opening the CD compartment automatically cancels the programmed sequence.
l Even if you press the ON/STANDBY button to enter the stand-by mode or the
function is changed from CD to some other function, the programmed selections
will not be cleared.
l During programme operation, random play is not possible.
Selected track number
Playback time
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Radio
1 Press the ON/STANDBY button to turn the power on.
2 Press the FUNCTION button until "FM" or "AM" appears on the dis-
play.
When operating with the remote control, press the TUNER button, and then the
BAND button to select "FM" or "AM".
3 Press the TUNING ( or ) button to tune in to the desired station.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired
station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 seconds, scanning will
start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
l This can be operated by pressing the TUNE ( or ) button on the remote
control.
l When radio interference occurs, auto scan tuning may stop automatically at
that point.
Radio
l Auto scan tuning will skip weak signal stations.
l To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
-
Press the FUNCTION (BAND) button to display the "ST" indicator.
l " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
l If the FM reception is weak, press the FUNCTION (BAND) button to extinguish the
"ST" indicator. The reception changes to monaural, and the sound becomes
clearer.
After use:
Press the ON/STANDBY button to enter the power stand-by mode.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the memorised station
n Memorising a station
You can store 30 AM and FM stations in memory and recall them at the push of a but-
ton. (Preset tuning)
n To recall a memorised station
Press the PRESET ( or ) button for less than 0.5 seconds to select
the desired station.
1 Perform the steps 1 - 3 in "Listening to the Radio" on page 20.
2 Press the MEMORY/SET (MEMORY) button to enter the preset tun-
ing saving mode.
Preset channel
Frequency and frequency band
n To scan the preset stations
The stations saved in memory can be scanned automatically. (Preset memory scan)
3 Within 5 seconds, press the PRESET ( or ) button to select the
preset channel number.
1 Press the PRESET ( or ) button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be tuned in se-
quentially, for 5 seconds each.
2 Press the PRESET ( or ) button again when the desired station
is located.
Store the stations in memory, in order, starting with preset channel 1.
Radio
4 Within 5 seconds, press the MEMORY/SET (MEMORY) button to
n To clear a memorised station
store that station in memory.
1
Recall the memorised station.
Whilst it is displayed, press the MEMORY/
SET (MEMORY) button.
2
3
Within 5 seconds, press the CLEAR button
on the remote control.
-Listeningtothememorisedstation
If the "MEMORY" and preset number indicators go out before the station is mem-
orised, repeat the operation from step 2.
5 Repeat steps 1 - 4 to set other stations, or to change a preset sta-
tion.
When a new station is stored in memory, the station previously memorised will
be erased.
Note:
The backup function protects the memorised stations for a few hours should there be
a power failure or the AC power lead disconnection.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and Sleep Operation
This may be operated only with the remote control.
n Timer playback
Before setting timer:
Timer playback:
The unit turns on and plays the desired source (CD, tuner) at the preset time.
1
Press the CLOCK button to check that the clock is on time.
Sleep operation:
The radio and compact disc can all be turned off automatically.
2
Load a disc to be played.
1 Press the ON/STANDBY button to turn the power on.
2 Press the CD or TUNER button to select the desired function.
When you selected the TUNER, tune in to the desired station.
3 Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4 Press the TIMER button and within 6 seconds, press the MEMORY
button.
a
TimerandSleepOperation-
5 Within 1 minute, press the PRESET ( or ) button to specify the
hour to start, then press the MEMORY button.
A
22
Download from Www.Somanuals.com. All Manuals Search And Download.
n Sleep operation
6 Within 1 minute, press the PRESET ( or ) button to specify the
minutes to start, then press the MEMORY button.
1 Play back the desired sound source.
l The timer playback starting time, function, and volume will be displayed, and
then the unit will enter the stand-by mode automatically.
2 Press the SLEEP button.
l " " will appear and the current time will be displayed.
To change the sleep time:
To cancel the timer playback:
Press the SLEEP button repeatedly to select the desired sleep time. The time
will decrease as follows.
Press the ON/STANDBY button to turn the power on.
7 When the preset time is reached, playback will start.
The amount of sleep time can also be changed whilst in the sleep mode.
The volume will increase gradually until it reaches the volume you were listening
at before your system enters the timer stand-by mode.
3:00
OFF
2:00
1:30
1:00
8 If you select CD, the unit will enter the stand-by mode after the
15
30
playback. If you select TUNER, it will enter the stand-by mode one
hour after the timer playback starts.
3 Your system will enter the power stand-by mode automatically af-
ter the preset time has elapsed.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
The volume will be turned down 1 minute before the sleep operation finishes.
s
Notes:
To cancel the sleep operation:
TimerandSleepOperation-
l Once the time is set, the setting will be retained until a new time is entered.
l When performing timer playback using another unit connected to the VIDEO/AUX
IN sockets, select "VIDEO/AUX" in step 2. At this time, only this unit will be turned
on or enter the power stand-by mode automatically. It will enter the power stand-by
mode 1 hour after the timer playback starts. (Another unit will not be turned on or
off.)
Press the ON/STANDBY button whilst the sleep timer is set.
d
To confirm the remaining sleep time:
Press the SLEEP button once whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
n To use timer and sleep operation together
Example: To fall asleep and wake to the same radio station
You can play back the same source only (the function cannot be switched).
1 Set the sleep time (see above, steps 1 - 2).
2 Whilst the sleep timer is set, set the desired playback time (steps
4 - 6, pages 22 - 23).
23
Download from Www.Somanuals.com. All Manuals Search And Download.
EnhancingYour System
The connection lead is not included. Purchase a commercially available lead as
shown below.
n Listening to the playback sounds from
VCR, DVD, etc.
VCR, DVD, etc.
1 Use a connection lead to connect the VCR, DVD, etc. to the VIDEO/
AUX IN sockets.
When using video equipment, connect the audio output to this unit and the video
output to a television.
2 Press the ON/STANDBY button to turn the power on.
To the line
output sockets
3 Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX button.
White
Red
4 Play the VCR, DVD, etc.
Note:
To prevent hum interference, place this unit away from a television.
Red
White
n To record CD signals on MDs
MD recorder
o
The digital signal from this unit can be recorded by MiniDisc recorders, etc.
RCA lead
(not supplied)
1 Remove the DIGITAL OUT socket cover.
2 Use a connection cable for digital recording to connect the unit to
a
the OPTICAL IN socket of a MiniDisc recorder, etc.
To the optical line
input socket
-
3 Press the ON/STANDBY button to turn the power on.
4 Put the MiniDisc recorder, etc. in the recording mode.
5 Play a CD on this unit.
A
Connection cable
for digital recording
Headphones
Note:
Only CD signals can be output.
n Headphones
l Before plugging in or unplugging the headphones, reduce the volume.
l Be sure your headphones have a 3.5 mm (1/8") diameter plug and are between 16
ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
l Plugging in the headphones disconnects the speakers automatically. Adjust the
volume using the VOLUME buttons.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Chart
Many potential "problems" can be resolved by the owner without calling a service
technician.
If something is wrong with this product, check the following before calling your author-
ised KENWOOD dealer or service centre.
n Tuner
Symptom
Possible cause
l Radio makes unusual noise con- l Is the unit placed near the TV or compu-
secutively.
ter?
n General
l Is the FM/AM loop aerial placed properly?
Move the AC power lead away from the
aerial if located near.
Symptom
Possible cause
l The clock is not on time.
l Did a power failure occur? Reset the
clock. (Refer to page 15.)
l When a button is pressed, the unit l Set this unit to the power stand-by mode
n Remote control
does not respond.
and then turn it back on.
Symptom
Possible cause
l If the unit still malfunctions, reset it. (Refer
to step 3 under "If trouble occurs" on page
26.)
l The remote control does not oper- l Is the AC power lead of the unit plugged
t
ate.
in?
l No sound is heard.
l Is the volume level set to "0"?
l Is the battery polarity respected?
l Are the batteries dead?
l Is the distance or angle incorrect?
l Are the headphones connected?
l Are the speaker wires disconnected?
l Does the remote control sensor receive
erncs
strong light?
n CD player
l
Symptom
Possible cause
oub
Ref
n Condensation
l Playback does not start.
l Is the disc loaded upside-down?
Sudden temperature changes, storage or op-
eration in an extremely humid environment
may cause condensation inside the cabinet
(CD pickup, etc.) or on the transmitter on the
remote control.
Condensation can cause the unit to malfunc-
tion. If this happens, leave the power on with
no disc in the unit until normal playback is pos-
sible (about 1 hour). Wipe off any condensa-
tion on the transmitter with a soft cloth before
operating the unit.
l Playback stops in the middle or is l Does the disc satisfy the standards?
not performed properly.
l Is the disc distorted or scratched?
l Playback sounds are skipped, or l Is the unit located near excessive vibra-
stopped in the middle of a track.
tions?
l Is the disc very dirty?
l Has condensation formed inside the unit?
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
Troubleshooting Chart (continued)
n Cleaning the CD pickup lens
Do not touch the laser pickup lens. If fingerprints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
n If trouble occurs
When this product is subjected to strong external interference (mechanical shock,
excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in step 1, unplug and plug in the unit, and then turn
the power on.
3
If neither step 1 nor 2 restores the unit, do the following:
Press the ON/STANDBY button to enter the power stand-by mode.
Unplug the AC power lead from the AC INPUT socket on the unit.
Whilst pressing down the MEMORY/SET button and the
AC power lead into the AC INPUT socket on the unit.
/
button, plug the
n Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a di-
luted soap solution, then with a dry cloth.
t/Mainenance-
Caution:
l Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.
l Do not apply oil to the inside of the unit. It may cause
malfunctions.
AC INPUT
erncs
Caution:
Ref
This operation will erase all data stored in memory including clock, timer settings,
tuner preset, and CD programme.
l
oub
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, KENWOOD reserves the right to
make design and specification changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
n Tuner
Frequency range
FM: 87.5 - 108 MHz
AM: 522 - 1,620 kHz
n General
n Speaker
Type
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 30 W
2-way type speaker system
5 cm (2") Tweeter
10 cm (4") Woofer
10 W
Power stand-by: 0.6 W
Dimensions
Weight
Width: 230 mm (9-1/16")
Height: 128 mm (5-1/16")
Depth: 293 mm (11-9/16")
Maximum input power
Rated input power
Impedance
5 W
2.7 kg (5.9 lbs.)
8 ohms
Dimensions
Width: 124 mm (4-7/8")
Height: 250 mm (9-13/16")
Depth: 238 mm (9-3/8")
n Amplifier
Output power
RMS: 20 W (10 W + 10 W) (10 % T.H.D.)
Speakers: 8 ohms
Weight
1.7 kg (3.7 lbs.)/each
Output terminals
erncs
Headphones: 16 - 50 ohms (recommended: 32 ohms)
CD digital output (optical)
-
Ref
Input terminals
Video/Auxiliary (audio signal): 500 mV/47 kohms
n CD player
Type
Compact disc player
Signal readout
D/A converter
Frequency response
Dynamic range
Non-contact, 3-beam semiconductor laser pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the bottom of the unit, in the spaces designated
on the warranty card, and in the space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for information or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|