CD PLAYER
DP-5090
DP-4090
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used for two models.
Model availability and features (functions) may differ
depending on the country and sales area.
COMPACT
DIGITAL AUDIO
B60-3043-00 MA ( T, M )
ID
98/12 11 10 9 8 7 6 5 4 3 2 1 97/12 11 10 9 8 7 6 5
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
Unpacking
Unpack the unit carefully and make sure that all accessories are put aside so they will not be lost.
3
Examine the unit for any possibility of shipping damage. If your unit is damaged or fails to operate, notify your dealer immediately. If your unit was shipped
to you directly, notify the shipping company without delay. Only the consignee (the person or company receiving the unit) can file a claim against the carrier
for shipping damage.
We recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the future.
Keep this manual handy for future reference.
Special features
CD-TEXT support
¶ The text information (disc title, track titles, names of the artists, songwriters, composers,
etc.) recorded on the CDs can be easily called and displayed in alphanumerics. (Some
Japanese words and text may not be displayed.)
@#
Advanced technologies incorporated in pursuit
of improved sound quality and stability
¶ D.R.I.V.E. (Dynamic Resolution Intensive Vector Enhancement) IC is built in for drastic re-
duction of distortion at small signal level.
¶ High-performance new D/A converter achieving a 24-bit resolution. (DP-5090 only)
Convenient features for dubbing CD onto tape
¶ CD peak search for setting the recording level that does not cause distortion.
(
¶ Edit function for rearranging tracks according to the tape length so that no music is inter-
rupted in the middle.
¶ Auto space function.
*
%
Easy operation functions
¶ Easy operation functions allow systematic operation with other KENWOOD components
connected through the system control connection.
6
Accessories
AC plug adaptor .............. (1)
Audio cord ........................ (1)
System control cord ............ (1)
Use to adapt the plug on the power cord
to the shape of the wall outlet.
(Accessory only for regions where use is
necessary.)
Remote control unit ......... (1)
Batteries (R6/AA) .............. (2)
Contents
Caution: Read the pages marked
carefully to ensure safe operation.
Introduction.................................................................. 2
Displaying all the text information (ALL INFO.) ............. 13
Programmed play (PGM mode)................................ 14
To check or change the programmed tracks .................. 15
To add a track to the program ......................................... 15
To clear tracks from the program .................................... 15
Repeated playback .................................................... 16
To repeat only the programmed tracks........................... 16
To repeat the entire disc ................................................... 16
Playback in random order (Random playback) ....... 17
Editing......................................................................... 18
To check the edited contents ........................................... 19
Playing or recording the edited contents ....................... 19
To clear the edited contents ............................................. 19
Peak search ........................................................................ 19
Timer operations........................................................ 20
In case of difficulty..................................................... 21
Specifications ............................................................. 23
Before applying power ................................................ 2
Safety precautions....................................................... 2
Special features ................................................................... 3
System connections .................................................... 4
To use the headphone......................................................... 5
Maintenance................................................................. 7
Controls and indicators ............................................... 8
Operation of remote control unit ............................... 9
Normal play (TRACK mode)...................................... 10
Playing tracks in order from track No.1 .......................... 10
Playback from desired track ............................................. 11
Skipping tracks .................................................................. 11
Searching ........................................................................... 11
Searching for tracks by title (TITLE SEARCH) ......... 12
Displays ...................................................................... 13
Time display on CD player (TIME DISPLAY) .................... 13
Selecting the text information display
(TEXT DISPLAY) ................................................................. 13
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
DP-5090/4090 (En)
Malfunction of microcomputer
Caution:
4
If operation is not possible or erroneous display appears even
though all connections have been made properly, reset the
microcomputer referring to “In case of difficulty”.
Do not plug in the power lead until all connections are com-
pleted.
¡
Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around the unit (from the largest outer
dimensions including projections) equal to, or greater than, shown below.
Left and right panels: 10 cm
Rear panel: 10 cm
Commercially-available
optical fiber cable
75Ω coaxial cable with RCA PIN.
(Commercially-available)
Digital component (MD, DAT, etc.)
(DP-5090 only)
(OPTICAL)
LINE 1 and LINE 2 output are the same
pair of signals. Use these jacks to connect
the unit to other system components.
DIGITAL INPUT
(COAXIAL)
DIGITAL
OUTPUT
SYSTEM
CONTROL
OUTPUT
ƒ
TEXT
OPTICAL COAXIAL
LINE 1
LINE 2
L
L
SL16 XS 8
R
R
(Except for DP-4090)
Remove the protection cap
To AC outlet
SL 16/XS8
when using the DIGITAL
OUTPUT (OPTICAL) jack.
System control cord
switch 6
SYSTEM
CONTROL
DIGITAL
INPUT
Commercially-available
optical fiber cable
OPTICAL
Digital amplifier
(or ordinary amplifier,
receiver, etc.)
CD
L
R
Audio cord
To wall AC outlet
1. Connect all cords firmly. If connections are loose there could be loss of sound or noise produced.
2. When plugging and unplugging connection cords, be sure to first remove the power cord from the AC outlet. Plugging/unplugging
connection cords without removal of the power cord can cause malfunctions or damage to the unit.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
5
Connection to a general-use amplifier
Use the provided audio cords to connect the OUTPUT jacks of this
unit to the CD input jacks (or AUX jacks) of the amplifier.
Connection to digital amplifier or MD
Connect the DIGITAL OUTPUT (OPTICAL or COAXIAL) jack to the
digital input jack of the amplifier, DAT recorder, MD recorder, etc.,
using an optical fiber cable or coaxial cable which are commercially
available in audio stores.
÷When using an optical fiber cable to connect this unit to a digital
amplifier, insert the plug straight into the jack until a snap sound is
heard.
Optical fiber cable
÷Be careful not to bend, coil, or bundle the optical fiber cable.
÷Optical fiber cables available on the market may not always be able to
be used with this player. If your cord cannot be used with this unit,
consult the store from which you purchased the cord or your nearest
dealer.
Adjusting the output levels of the output jacks
and headphone output
The OUTPUT level (UP/DOWN) keys of the remote control unit can
adjust the output levels from the LINE/OUT and PHONES jacks of
the unit.
To use the headphone
Connect a stereo headphone to the PHONES jack of the CD player.
Adjust the sound volume using the remote control unit.
OUTPUT -12dB
Output level
OUTPUT
DOWN
UP
COMPACT DISC PLAYER DP-5090
POWER
-ON –OFF
PHONES
÷Itisnotfavorableforthesoundqualitytodecreasetheoutputlevelfrom
this unit too much. Use these keys for coordination with other line
levels.
÷Adjusting the headphone output level also changes the LINE/OUT
level. Do not adjust the output level from this unit particularly during
recording.
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
6
SYSTEM CONTROL CONNECTIONS
Connecting system control cords after connecting a KENWOOD
audio component system lets you take advantage of convenient
system control operations.
Amplifier or receiver
SYSTEM
CONTROL
There are two KENWOOD system control modes. Make connec-
tions according to the groups of terminal symbols shown below.
[XS8] Mode
[SL16] Mode
:
:
lets you combine F, f, and ƒ terminals
for terminals only
This unit
SYSTEM
CONTROL
This unit is compatible with both [XS8] and [SL16] modes.
Select the mode according to the connected components. 4
Cassette deck
SL16 XS 8
SYSTEM
CONTROL
j
÷Do this operation after completing all connections.
(Ensure that the power is OFF.)
NNootteess
1. If your amplifier or receiver does not have a system control terminal,
do not connect any system control cords to the system control ter-
minals on the other components.
2. Do not connect system control cords to any components other than
those specified by KENWOOD. It may cause a malfunction and dam-
age your equipment.
3. Be sure the system control plugs are inserted all the way in to the
system control terminals.
SYSTEM CONTROL OPERATIONS
Remote Control
Lets you operate this unit with the system remote control unit supplied with the amplifier or receiver.
Automatic Operation (Except [XR] equipment)
Automatically switches the input selector on the amplifier or receiver when you start playback from this unit.
Synchronized Recording (Except [XR] equipment)
Lets you synchronize recording with the start of playback when recording from CD. Also, the simple CCRS operation lets you make great recordings
from CD.
See the operating instructions supplied with your cassette deck for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
DP-5090/4090 (En)
7
Disc handling precautions
Cleaning
If fingerprints or foreign matter become
attached to the disc, lightly wipe the
disc with a soft cotton cloth (or similar)
from the center of the disc outwards
in a radial manner.
Handling
Hold compact discs so that you do not
touch the playing surface.
Label side
÷Do not attach paper or tape to either
the playing side or the label side of
compact discs.
Playing side
Sticker
÷The paste left on the label surface after
a sticker has been peeled off is a factor
which may cause malfunction. If the
surfaceisstickyduetoremainingpaste,
be sure to clean it with alcohole before
use.
Storage
When a disc is not to be played for a
long period of time, remove it from the
CD player and store it in its case.
Sticky paste
Never play a cracked or warped disc.
Caution on disc used
During playback, the disc rotates at high speed in the player.
Therefore, to avoid danger, never use a cracked or deformed disc or a
disc repaired with tape or adhesive agent.
Do not use cleaning discs.
Please do not use commercially available cleaning discs, they may dam-
age the internal mechanism.
Discs which can be played with this unit
Cleaning
CD (12 cm, 8 cm) (CD-TEXT support), CDV (only the audio
part)
÷With CD-G (CD Graphics) discs, this unit can play only the audio.
Note related to transportation and movement
Do not use volatile solvents such as alcohol, paint thinner, gasoline,
or benzine, etc. to clean the cabinet. Use a clean dry cloth.
Before transporting or moving this unit, carry out the following
operations.
Do not use contact cleaners because it could cause a malfunction.
Be specially careful against contact cleaners containing oil, for they
may deform the plastic components.
1. Turn the power ON but do not load a disc.
2. Verify that the display shown appears.
NO DISC
3. Wait a few seconds and turn the power OFF.
CD accessories
The CD accessories (stebilizer, protection sheet, protection ring, etc.)
which are marketed for improving the sound quality or protecting discs
as well as the disc cleaner should not be used with this system be-
cause they may cause malfunction.
Beware of condensation
Be especially careful in the following conditions:
÷When the unit is brought from a cold place to a warm place, and there
is a large temperature difference.
When water vapor comes into contact with the surface of cold mate-
rial, water drops are produced. If condensation occurs, correct opera-
tion may not be possible, or the unit may not function correctly.
This is not a malfunction, however, the unit should be dried. (To do
this, turn the POWER switch ON and leave the unit as it is for several
hours.)
÷When a heater starts operating.
÷When the unit is brought from an air - conditioned place to a place of
high temperature with high humidity.
÷When there is a large difference between the internal temperature of
the unit and the ambient temperature, or in conditions where
condensation occurs easily.
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
DP-5090/4090 (En)
8
Play indicator
(The displays given in this manual are approximations only.
Theymaydifferfromwhatactuallyappearsonthedisplay.)
Text information display
••• •• •• •••• •• ••
Pause indicator
»
DISPLAY
1
2
3 4
5
SEARCH
¡
TEXT DISPLAY PEAK SEARCH
1
POWER
-ON –OFF
7
6
¢
0
PHONES
COMPACT
4
DIGITAL AUDIO
TEXT
!
9
6
7
8
0
Thekeyswiththesamenameasthoseontheremotecontrol
unit operate the same way as the remote control unit.
1 POWER switch
Turns the power ON/OFF.
2Remote control light sensor
0
9
#
(
!
6PHONES jack
Use to connect (optional) headphones.
7Door (disc tray)
5
0
0
0
!
0
Load the disc to be played back.
8Open/Close key (0)
3TEXT DISPLAY key
Used to select the CD-TEXT information display.
4PEAK SEARCH key
Opens and closes the door (disc tray).
9STOP key (7)
5Search keys (1,¡)
0Skip keys (4,¢)
Fast forwards or fast reverses the track.
Press to skip to the beginning of another track.
!PLAY/PAUSE key (6)
Each time the key is pressed, playback and pause switch
each other.
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of remote control unit
DP-5090/4090 (En)
The keys with the same name as those on the main unit operate the same way as the main unit.
The keys marked * are provided only on the remote control unit.
9
1 Program-related and other keys
* RANDOM key
*3OUTPUT (DOWN, UP) key
5
!
DISC SELECTOR
2
RANDOM
REPEAT
P.MODE
1
4
3
&
^
$
#
*
5
2
DISC SKIP
3
* REPEAT key
*4Numeric keys ( 1 ~ 0 , +10
)
* P.MODE key
1
1
* TIME DISPLAY key
* EDIT key
5 Basic function keys
Stop key (7)
TIME
DISPLAY
4
7
5
8
6
9
0
0
!
!
* CHECK key
* CLEAR key
%(
%(
Play/Pause key (6)
Skip (4,¢) keys
Search keys (1,¡)
4
5
EDIT
TEXT
DISPLAY
CHECK
0
+10
6
2 Selector keys relating to text informa-
2
3
CLEAR ALL INFO.
7
tion
TITLE
SEARCH
4
1
¢
¡
TEXT DISPLAY key
* ALL INFO. key
#
#
@
OUTPUT
DOWN
UP
* TITLE SEARCH key
REMOTE CONTROL UNIT
RC-P0505
Model: RC-P0505
Infrared ray system
Loading batteries
1Remove the cover.
2 Insert batteries.
3Close the cover.
2
2
1
1
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
Operation
After plugging in the power cord, press the POWER switch
of the main unit to turn the power ON. When the power is
turned ON, press the key of the function to be operated.
Remote control
light sensor
6m
30
30
Operating range
(Approx.)
÷When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
REMOTE CONTROL UNIT
RC-P0505
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case, change the system installation position to prevent the malfunction.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
Normal play (TRACK mode)
UsethefollowingproceduretoplayaCDintheoriginalorder
of tracks from track No. 1.
DP-5090/4090 (En)
10
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
Playing tracks in order from track No. 1
1 Press the POWER switch to ON.
POWER
-ON –OFF
÷Playback starts when a disc has been loaded.
2 Load a disc.
Open the door.
Place a disc.
1
2
0
÷Do not touch the played side of disc.
÷Loading two discs together will cause malfunctioning.
÷Place the disc properly along the groove on the tray. (If the disc is not
placed horizontally, malfunction will result.)
Label side
÷A single CD (8 cm disc) can also be played.
÷Ordinary CD single (8 cm) disc adapters sold in audio stores cannot be
used with this unit.
Disc tray
Close the door.
3
CLOSE •
0
÷In the case of a CD-TEXT disc, the disc’s title is scrolled on the display.
3Start playback.
Lights up.
01
Track NO. being played
1:23
Elapsed time of track being played
6
÷In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
WhatisthendisplayedisinaccordancewiththeTEXTDISPLAYmode.
#
To pause playback
To stop playback
7
6
01
Lights up.
÷Each press pauses and plays the CD alternately.
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
11
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
Remote control unit only
Playback from desired track
Select the desired track No.
Press the numeric keys as shown below....
1
2
3
To enter track No. 23 : 003
To enter track No. 40 : 0000)
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0505
÷Playback starts from the selected track and continues on the subse-
quent tracks.
+10
Skipping tracks
4
¢
To skip
backward
To skip
forward
÷The track in the direction of the pressed key is skipped, and the selected
track will be played from the beginning.
÷When the 4 key is pressed once during playback, the track being
played will be played from the beginning.
Searching
SEARCH
¡
1
Backward
search
Forward
search
÷Playback starts from the position where the key is released.
What is the “normal play TRACK mode”?
The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off.
To set the unit to the TRACK mode:
Press the P.MODE key when the ”PGM“ or ”EDIT“ display is lighted.
Press the RANDOM key when the ”RNDM“ display is lighted.
Goes off.
Goes off.
Goes off.
P.MODE
RANDOM
PGM01 EDIT RNDM
REMOTE CONTROL UNIT
RC-P0505
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for tracks by title (TITLE SEARCH)
In the case of a CD-TEXT disc, the tracks to be heard can be
searched by title.
DP-5090/4090 (En)
12
÷Load a disc (CD-TEXT support) in the CD
player.
Preparation
COMPACT DISC PLAYER DP-5090
÷Check that the unit is in the normal play
TRACK mode.
!
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
1Press the TITLE SEARCH key.
Blinks.
TITLE
SEARCH
01 TITLE ABCDEF
Track title
REMOTE C
RC-P505
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
To stop the search, press
the TITLE SEARCH key again.
2Select the name of the track (title) to be heard.
4
¢
02 TITLE XYZ
REMOTE CONTROL UNIT
RC-P0505
If no keys are operated for more than a second, the track title is scrolled on
the display.
The track number
skips backward.
The track number
skips forward.
3Start playback.
TITLE XYZ
➡
6
The letters move toward the left.
REMOTE CONTROL UNIT
RC-P0505
02
Track NO. being played
1:23
Elapsed time of track being played
÷What is displayed will differ depending on the item which has been
selected by TEXT DISPLAY.
#
Display scrolling
Some track titles contain so much text information that
the full titles will not fit on the display. In cases like this,
the letters on the display move from right to left so that the
non-visible part of the title is revealed. This type of display
movement is known as “scrolling display.”
Display example
0 1 C A B C D E F G H I J K L M N O P Q ...
➡
Scroll display
0 1 L M N O P Q ...
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays
DP-5090/4090 (En)
Remote control unit only
Time display on CD player (TIME DISPLAY)
13
Each press of the TIME DISPLAY key changes the displayed contents.
1
2
3
4
: Elapsed time of track being played
: Remaining time of track being played
1 :23
-2 :37
TIME
DISPLAY
: Elapsed time of entire disc
(T lights up.)
23 :45T
-36 :25T
: Remaining time on entire disc (T lights up.)
REMOTE CONTROL UNIT
RC-P0505
÷Only the display 1 and 2 will be displayed in RANDOM and EDIT
modes.
Selecting the text information display (TEXT DISPLAY)
In the stop mode When the key is pressed once, the 1 “Disc
In the case of a CD-TEXT disc, the displays shown below can be
selected.
Title” is scrolled on the display; when it is
pressed repeatedly, the display is changed.
(In the PGM mode, the displays are the same
as for play mode.)
1 Disc Title
2 Disc Artist : Singer (or performer)
3 TIME : Track number, time display
: Disc title
TEXT
DISPLAY
REMOTE CONTROL UNIT
RC-P0505
÷If the key is released while 2 ”Disc Artist“ is displayed, 1 ”Disc
Title“ returns to the display.
In the play mode
When the key is pressed once, the 1 “Track
Title” is scrolled on the display; when it is
pressed repeatedly, the display is changed.
(This operation can be performed even when
operation has stopped in the PGM mode.)
Disc Title : AB
➡
Scroll display
: ABCDEF...
1 Track Title : Track title
2 Track Artist : Singer (or performer)
÷When there is no text information to be displayed “– – – – –” is
scrolled on the display.
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
3 Disc Title
4 Disc Artist : Singer (or performer)
5 TIME : Track number, time display
: Disc title
÷If the key is released at any point while 2 ”Track Artist“ to 4 ”Disc
Artist“ is displayed, 1 ”Track Title“ returns to the display.
Remote control unit only
Displaying all the text information (ALL INFO.)
In the case of a CD-TEXT disc, the text information shown below is displayed automatically during normal play (TRACK mode).
Each item is displayed in turn each time the key is pressed.
When the key is repeatedly pressed while an item is being displayed,
the display is forcibly moved to the next item.
ALL INFO.
REMOTE CONTROL UNIT
RC-P0505
1 Disc/Track Title : Disc and track titles
2 Disc/Track Artist : Singer (or performer)
3 Disc/Track Songwriter : Songwriter
4 Disc/Track Composer : Composer
➡
Scroll display
5 Disc/Track Arranger
6 Disc/Track Message
: Arranger
: Message from sponsor or artist
Arranger : ABCD
7 ID INFO.
8 Genre INFO.
: Record company, release date, etc.
: Genre information
To skip to the next track while the items are being displayed:
Press the ¢key.
9 ALL INFO. END : (Release)
÷Items from 1 to 6 are displayed in the sequence of disc and track.
÷When there is no text information to be displayed “– – – – –” is scrolled
on the display.
÷In the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will
appear for approx. 3 seconds.
÷The display can be returned to a previous item by pressing the 4
key.
÷ALL INFO. is released when any other key is pressed while items
are being displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Programmed play (PGM mode)
Use the following procedure to program desired tracks in a
desired order. (up to 32 tracks)
DP-5090/4090 (En)
14
÷Load a disc in the CD player.
Preparation
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
1 Press so that the “PGM” indicator lights.
Do this operation in the stop mode.
Blinks.
P.MODE
PGM01 TNO.??
REMOTE CONTROL UNIT
RC-P0505
2Program desired tracks.
1Select the desired track No.
Press the numeric keys as shown below....
PGM01 TNO.25 AB
«
To enter track No. 25: 005
1
2
3
PGM01 ABCDEFGH
In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0505
+10
PGM01 TNO.25
Go to step 2 within 8 seconds.
2Set the entry.
P.MODE
÷Tracks can also be selected by pressing the 4 or ¢key.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
REMOTE CONTROL UNIT
RC-P0505
÷If you make a mistake, press the CLEAR key and enter the track No.
from the beginning.
÷When the total playing time of the programmed tracks exceeds 100
minutes, the remaining time on the disc will not be displayed any more.
3Repeat steps 1and 2above.
3Start playback.
÷When the 4or ¢key is pressed during playback, the track will be
skipped in the direction of the pressed button.
6
÷When the 4key is pressed once during playback, the play position
returns to the beginning of the current track being played.
REMOTE CONTROL UNIT
RC-P0505
To stop playback
7
÷The programmed contents remain in memory.
REMOTE CONTROL UNIT
RC-P0505
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
Auto space function
15
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By re-
cording tracks with these spaces on tape, the search and repeat
play operations of tape using the DPSS function (which works
by searching the non-recorded spaces) can be performed reli-
ably.
÷Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track Nos.
Remote control unit only
To check or change the programmed tracks
Blinks.
1 Press the CHECK key.
Press until the track No. to
be changed is displayed.
CHECK
PGM01 TNO.25
REMOTE CONTROL UNIT
RC-P0505
÷Perform only step 1 to simply check the program.
÷In the case of a CD-TEXT disc, the track’s title is scrolled on the display.
÷Each time the key is pressed, the program No. and the track No. on CD
are displayed.
2 Select the new track No.
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0505
Example
+10
↓
÷Press it while the “PGM 01” indicator blinks.
÷The track being played cannot be changed.
3Set the entry.
P.MODE
REMOTE CONTROL UNIT
RC-P0505
Remote control unit only
To add a track to the program
1Select the desired track No.
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0505
+10
÷When a track No. is selected, the track will be added to the end of the
existing program.
2Press the P.MODE key.
Remote control unit only
To clear tracks from the program
Press to clear tracks from the end.
CLEAR
÷Each time the key is pressed, the last track in the program is cleared.
÷The tracks which are programmed earlier than the track being played
cannot be cleared.
REMOTE CONTROL UNIT
RC-P0505
To clear all track.
P.MODE
REMOTE CONTROL UNIT
RC-P0505
÷Selected tracks can be also completely cleared just by operating the 0
key.
÷The entire program is cleared.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeated playback
DP-5090/4090 (En)
÷Load a disc in the CD player.
Preparation
16
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
To repeat only the programmed tracks
Program desired tracks.
1
PGM01 TNO.??
(Perform steps 1 and 2 on page 14.)
Switch REPEAT ON.
2
÷All of the programmed tracks will be repeated.
÷In case only one track is programmed, only that track will be repeated.
÷Up to 32 tracks can be programmed. When “FULL” is displayed, no
more tracks can be programmed.
REPEAT
REMOTE CONTROL UNIT
RC-P0505
The current status is displayed when the
key is pressed once.
When it is pressed while the status is
displayed, the repeat ON status can be set
to OFF (or vice versa).
REPEAT ON
Start playback.
3
6
REMOTE CONTROL UNIT
RC-P0505
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON → OFF)
To repeat the entire disc
Press so that the “PGM” indicator
1
goes off.
P.MODE
\
PGM01
01
REMOTE CONTROL UNIT
RC-P0505
Switch REPEAT ON.
2
REPEAT
The current status is displayed when the
key is pressed once.
When it is pressed while the status is
displayed, the repeat ON status can be set
to OFF (or vice versa).
REMOTE CONTROL UNIT
RC-P0505
REPEAT ON
Start playback.
3
6
REMOTE CONTROL UNIT
RC-P0505
To cancel repeated playback
Press the REPEAT key twice. (REPEAT ON → OFF)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback in a random order (Random playback)
DP-5090/4090 (En)
As tracks are selected at random, you can enjoy listening to
for a long time.
17
÷Load a disc in the CD player.
Preparation
COMPACT DISC PLAYER DP-5090
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
Check that the unit is in the normal play TRACK
1
mode.
!
2Press the RANDOM key.
During track selection: ”>“ and ”<“ move from the outside to the inside.
<<<><E12 ><>>>
«
RANDOM
The number here changes.
REMOTE CONTROL UNIT
RC-P0505
RNDM005
In case track No. 5 is selected
÷Each time a track ends, the same operation as above is repeated, and
the track selected next is played.
÷Random play stops after all of the tunes have been played once.
÷The random playback can also be repeated by pressing the REPEAT
key.
To select another track in the middle of playing one
To cancel random playback
RANDOM
¢
REMOTE CONTROL UNIT
RC-P0505
REMOTE CONTROL UNIT
RC-P0505
÷Pressing the 4key once returns to the beginning of the track being
played.
÷Press the RANDOM key to start normal playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
DP-5090/4090 (En)
The following procedure allows to record a CD within the
specified tape length so that no music is interrupted in the
middle at the ends of sides A and B.
18
÷Load a disc in the CD player.
Preparation
COMPACT DISC PLAYER DP-5090
÷Check that the unit is in the normal play
TRACK mode.
!
REMOTE CONTROL UNIT
RC-P0505
: Keys and control used in the operations described on this page.
1Light the “EDIT” indicator.
Do this operation in the stop mode.
Blinks.
EDIT
REMOTE CONTROL UNIT
RC-P0505
EDIT C-??
Go to step 2 within 8 seconds.
If more than 8 seconds have elapsed,
press the key again.
2Enter the recording time of the tape.
When using the numeric keys:
Press the numeric keys as shown below.
30-minute tape : 000)
46-minute tape : 00006
1
2
3
4
7
5
8
0
6
9
REMOTE CONTROL UNIT
RC-P0505
EDIT C-46
+10
÷Recording within 99 minutes can be specified in minutes (2 digits).
÷If you commit a mistake in time entry, press the P.MODE key and
restart the procedure from the beginning.
When using the TIME DISPLAY key:
1 Select the time.
2 Set the entry.
TIME
DISPLAY
EDIT
➡
÷By pressing the TIME DISPLAY key the set time-length intervals will
change in this order: "46=54=60=74=90=??"
REMOTE CONTROL UNIT
RC-P0505
÷The interval length can be adjusted with the skip keys 4and ¢in
units of one minute (to a maximum of 99 minutes).
The CD contents are edited as follows.
(1) The tape recording time input is divided by two, and tracks that can
be accommodated in file A(which refers to tracks on tape side A) are
selected in order of their track Nos.
Editing in the FILE A
EDIT A 01
(2) In a few seconds, the time left on tape side A is displayed, then file
B (tracks on tape side B) is edited in the same manner.
The selected track numbers are displayed in sequence.
EDIT A -1:23
Remaining time display.
1. While you can edit with a different time setting to that of the tape you are using, part of the tape may be left with nothing recorded on it, or
the last track on side A or side B may be cut short.
2. The EDIT function may not operate properly for discs having only one track or having tracks of long duration such as classical music.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
To check the edited contents
19
CHECK
EDIT A 01
REMOTE CONTROL UNIT
RC-P0505
÷When the CHECK key is pressed, track numbers and remaining time
in the file A are displayed first, then those in the file B.
Playing or recording the edited contents
Press the 6key to start playback according to the edited
content. The playback pauses at the beginning of the track
NNoottee
edited for tape side B. Press the 6key again to continue
playback.
6
When recording the edited content onto a tape, it is recommended
to use the synchro recording or CCRS recording function of
KENWOOD cassette decks.
REMOTE CONTROL UNIT
RC-P0505
÷Do not adjust the output level from this unit particularly during record-
ing.
÷For details, see the instruction manual of the cassette deck.
To clear the edited contents
Press any one of these keys.
P.MODE
CLEAR
REMOTE CONTROL UNIT
RC-P0505
0
÷The edited data is cleared entirely.
Peak search
This function identifies the highest peak level of the entire recording on a CD before recording the CD on the cassette deck.
With this unit, after the peak level of each track recorded on the CD has been searched, the section of the music containing the highest peak level will be
played repeatedly so that the recording level of the cassette deck or MD (analog recording) can be adjusted easily.
This feature is particularly convenient when using a cassette deck with manual recording level adjustment which does not have the automatic recording
level adjustment function.
(This unit cannot perform peak search recording when used with a cassette deck equipped with the peak search function.)
PEAK
PEAK SEARCH
÷After a high-speed search of all tracks, the searched peak level section
will be repeated at normal speed.
÷The peak level is detected by sampling the section which seems to
contain the maximum level in the disc. However, it may happen that the
transient maximum level is not detected. Therefore, it is recommended
tosettherecordinglevelbyleavingacertainmarginabovethedetected
peak level.
To cancel Peak search:
Press the 7key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer operations
Timer playback of CD can be started at any time using an
audio timer which is available in audio stores.
DP-5090/4090 (En)
This unit
20
System control cord
Audio cord
÷Connect the power cords of the associated
components so that their power can be turned
ON through the audio timer.
Preparation
(Also, be sure to read carefully the instruction
manual of the timer.)
Amplifier
12 : 00
To wall AC outlet
Audio timer
Turn the powers of the associated components
ON.
÷If the amplifier is not connected to the CD player through a system
control cord, select the "CD" input with the input selector.
1
2Preparation
Load a disc in the CD player.
0
Label side
3Set the amplifier volume.
Play the disc.
1
6
Adjust the amplifier volume.
2
3
Stop the disc.
7
4Set the timer ON time.
Set the timer so that it supplies
power at the specified time.
÷With some audio timer models, the power is automatically turned OFF
when the timer ON time is set. With such a model, skip step 5 below.
5Turn OFF the power output from the audio timer.
÷Do not touch the POWER switches of the amplifier and CD player.
÷When the set time comes, the disc playback starts automatically.
1. Some amplifiers cannot be used with a timer. Before using a amplifier, check it.
2. When operating the unit other than CD player using an audio timer, be sure to remove the disc from the CD player.
NNootteess
Download from Www.Somanuals.com. All Manuals Search And Download.
In case of difficulty
DP-5090/4090 (En)
What appears to be a malfunction may not always be serious. If your unit should not perform as expected, consult the
table below to see if the problem can be corrected before seeking help from your dealer or service representative.
21
Operation to reset
The microcomputer may fall into malfunction (impossibil-
Set the POWER switch to OFF, and after several sec-
ity to operate, erroneous display, etc.) when the connec-
onds, set the POWER switch back to ON.
tion cords are unplugged while power is ON or due to an
external factor. In this case, execute the following method
to reset the microcomputer and return it to normal condi-
tion.
CD player unit
Symptom
Cause
Remedy
÷Insert the power plug firmly to the AC outlet.
÷Turn the amplifier’s power ON.
÷Power plug is loosely connected.
÷Withthepowerplugconnectedtotheswitched
AC outlet of an amplifier, the power of the
amplifier is turned off.
The power is not turned on with the
POWER switch ON.
÷Disc is loaded upside down.
÷Disc is loose.
÷Load the disc again with its label side up.
÷Insert the disc properly.
÷Wipe off the dust on the surface of the disc
referring to ”Disc handling precautions“.7
÷Replace the disc with a new one.
Disc is loaded, player does not play.
÷Disc is dirty.
÷Disc is cracked.
÷Condensation has occurred on the optical lens ÷Leave the player for about 1 hour so that the
unit.
condensation is removed.
7
÷Play mode is not entered.
÷Press the 6key.
No sound.
÷Disc is too dirty.
÷Wipe off the dust on the disc surface referring
to ”Disc handling precautions“.
÷Replace the disc with a new one.
÷Connect all connection cords firmly.
÷Adjust the output level with OUTPUT key on
the remote control unit.
7
÷Disc is cracked.
÷The connection cords are inserted loosely.
÷Output level is attenuated too low.
5
÷Disc is too dirty.
Music is interrupted. (Sound is skipped.)
÷Wipe off the dust on the disc surface referring
to ”Disc handling precautions“.
7
÷Disc is cracked.
÷Oscillation is applied to this unit.
÷Replace the disc with a new one.
÷Try selecting a place where no strong vibra-
tions occur by changing the installation place,
etc.
÷This unit is designed so that play begins auto-
matically when the power is turned on if a disc
is already loaded.
Play begins as soon as the power is
turned on.
÷If automatic play is not required, remove the
disc from the player before turning the power
OFF.
Remote control unit
Symptom
Cause
Remedy
÷Batteries are exhausted.
÷Replace with new batteries.
÷Operate the remote control unit within the con-
trollable range.
9
Remote control operation is not possi-
ble.
÷The remote control unit is too far away from
the main system, controlling angle is too large,
or there is an obstacle in between.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
DP-5090/4090 (En)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DP-5090/4090 (En)
DP-5090
DP-4090
23
[ Format ]
[ Format ]
System ............................ Compact disc digital audio system
Laser ........................................................ Semiconductor laser
System ............................ Compact disc digital audio system
Laser ........................................................ Semiconductor laser
[ D/A Convertors ]
[ D/A Convertors ]
D/A Conversion ............................1 Bit (24 bit Fine D.R.I.V.E.)
Oversampling ................................................. 32 fs (1411 kHz)
D/A Conversion .............................................. 1 Bit (D.R.I.V.E.)
Oversampling ..................................................... 8 fs (352 kHz)
[ Audio ]
[ Audio ]
Frequency response.............................4 Hz ~ 20 kHz, 0.5 dB
Signal to noise ratio.................................... More than 114 dB
Dynamic range ............................................ More than 100 dB
Total harmonic distortion + noise
Frequency response.............................4 Hz ~ 20 kHz, 0.5 dB
Signal to noise ratio.................................... More than 100 dB
Dynamic range .............................................. More than 95 dB
Total harmonic distortion + noise
............................................... Less than 0.002% (at 1 kHz)
Channel separation ....................More than 100 dB (at 1 kHz)
Wow & flutter ......................................... Unmeasurable Limit
Output level/impedance
............................................... Less than 0.005% (at 1 kHz)
Channel separation ......................More than 95 dB (at 1 kHz)
Wow & flutter ......................................... Unmeasurable Limit
Output level/impedance
Variable................................................... (Max.) 2 V/0.3 kΩ
Digital output
Variable................................................... (Max.) 2 V/0.3 kΩ
Digital output
Coaxial ........................................................0.5 V p-p / 75 Ω
Optical ................................................ –15 dBm ~ –21 dBm
(Wave length 660 nm)
Coaxial ........................................................0.5 V p-p / 75 Ω
Optical ................................................ –15 dBm ~ –21 dBm
(Wave length 660 nm)
Headphone output (Max.) ................................. 20 mW (32 Ω)
Headphone output (Max.) ................................. 20 mW (32 Ω)
[ General ]
[ General ]
Power consumption..........................................................12 W
Dimensions ........................................ W: 440 mm (17-5/16")
H: 127 mm (5")
Power consumption..........................................................12 W
Dimensions ........................................ W: 440 mm (17-5/16")
H: 127 mm (5")
D: 366 mm (14-7/16")
D: 366 mm (14-7/16")
Weight (Net) ..................................................... 5.0 kg (11.0 lb)
Weight (Net) ..................................................... 4.8 kg (10.5 lb)
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.
NNootteess 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
Download from Www.Somanuals.com. All Manuals Search And Download.
For your records
Record the serial number, found on the back of the unit, in the spaces
designated on the warranty card, and in the space provided below. Refer
to the model and serial numbers whenever you call upon your dealer for
information or service on this product.
Model
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
|