Kawasaki Impact Driver 821048 User Manual

COMPONENT

#840128

1/2" IMPACT WRENCH KIT

INSTRUCTION MANUAL

FOR CUSTOMER SERVICE

POUR LE SERVICE APRÉS VENTE

OU DU CONSOMMATEUR

87-1904-60957

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS

PRODUCT. BEFORE USE, READ CAREFULLY AND UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT

LABELS. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

PARA EL SERVICIO

PARA EL CONSUMIDOR

KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™

MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR

DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE

DIRECTED TO:

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT, DO NOT RETURN THIS

PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL,

HAVE THE FOLLOWING INFORMATION AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE

REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE A SUGGESTION OR

COMMENT, GIVE US A CALL OR EMAIL US AT: [email protected]. YOUR FEEDBACK IS VITAL TO US.

1-800-590-3723

Printed in China

Imprimé dans la Chine French

Impreso en China Spanish

1431 VIA PLATA

LONG BEACH, CA 90810-1462 USA

840128 – 1/2" Corded Impact Wrench

Download from Www.Somanuals.com. All Manuals Search And Download.

WORK AREA

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, may result in property damage.

Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

NOTE provides additional information that is useful

for proper use and maintenance of this tool. If a

NOTE is indicated make sure it is fully understood.

Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite the

dust or fumes.

Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

IMPORTANT SAFEGUARDS

ELECTRICAL SAFETY

People with electronic devices, such as pacemakers, should consult their

physician(s) before using this product. Operation of electrical equipment in

close proximity to a heart pacemaker could cause interference or failure of

the pacemaker.

Do not abuse the cord. Never use the cord to carry the tool. Keep the cord

away from heat, oil, sharp edges, or moving parts. Replace damaged cords

immediately. Damaged cords may create a fire.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other construction activities contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm.

PERSONAL SAFETY

Some examples of these chemicals are:

• Lead from lead-based paints.

Stay alert, watch what you are doing, and use common sense when operating a

power tool. Do not use tool while tired or under the influence of drugs, alcohol

or medication. A moment of inattention while operating power tools may result in

serious personal injury.

• Crystalline silica from bricks and cement and other masonry products,

and arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as dust masks that are

specially designed to filter out microscopic particles.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep

your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry or

long hair can be caught in moving parts.

Remove adjusting keys or wrenches before turning the power tool “ ON” .

A wrench or a key that is left attached to a rotating part of the power tool may result

in personal injury.

WARNING: Handling the power cord on this product may expose you to lead, a

chemical known to the State of California to cause cancer and birth defects or

other reproductive harm. Wash hands after handling.

Do not overreach. Keep proper footing and balance at all times. Proper footing

and balance enables better control of the power tool in unexpected situations.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safety

shoes, hard hat or hearing protection must be used for appropriate conditions.

Download from Www.Somanuals.com. All Manuals Search And Download.

TOOL USE AND CARE

SAFETY RULES FOR IMPACT WRENCHES

Use clamps or other practical ways to secure and support the workpiece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

Use only impact sockets. Non-impact sockets may shatter or break causing

injury and/or damage.

Do not force tool. Use the correct tool for your application. The correct tool will

Ensure fastener and/or system will withstand the level of torque generated

do the job better and safer at the rate for which it is designed.

by the tool. Excessive torque may cause breakage and possible personal injury.

Do not use the tool if the power switch does not turn it “ON” or “OFF”. A tool that

cannot be controlled with the switch is dangerous and must be repaired.

Always wear safety goggles or eye protection when using this tool. Use a dust

mask or respirator for applications which generate dust.

Disconnect the power cord plug from the power source before making any

adjustments, changing accessories or storing the tool. Such preventive safety

measures reduce the risk of starting the tool accidentally.

Do not grasp the tool or place your hands too close to the spinning anvil. Your

hand may be lacerated or may cause injury.

Secure the material being worked on. Never hold it in your hand or across your

legs. Unstable support can cause loss of control and injury.

Store idle tools out of reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

Position yourself to avoid being caught between the tool or side handle and walls

or posts. Should the socket or bit become bound in the work, the reaction torque

of the tool could crush your hand or leg.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained

tools with a sharp cutting edge are less likely to bind and are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

Check to see that keys and adjusting wrenches are removed from the Impact

Wrench before switching the tool “ ON” . Keys or wrenches can fly away at high

velocity striking you or a bystander.

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may create a risk of injury when used

on another tool.

When using the Impact Wrench, always maintain a firm grip on the tool with both

hands.

Keep the handle of the Impact Wrench dry, clean, and free from oil and grease.

Do not run the Impact Wrench while carrying it at your side. A spinning socket or

bit could become entangled with clothing and injury may result.

SERVICE

Tool service must be performed only by qualified repair personnel. Service or

maintenance by unqualified personnel may result in a risk of injury.

Disconnect the plug from the power supply and place the switch in the locked or

“OFF” position before making any assembly adjustments, changing accessories,

performing any inspection, maintenance or cleaning procedures. Such preventive

safety measures reduce the risk of starting the tool accidentally.

When servicing a tool, use only identical replacement parts. Follow instructions

in the Maintenance section of this manual. Use of unauthorized parts or failure to

follow Maintenance Instructions may create a risk of shock or injury.

Do not use the Impact Wrench if it has been damaged, left outdoors in the rain,

snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Impact Wrench. These carry important

information. If unreadable or missing, contact Alltrade for a replacement.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

OPERATING INSTRUCTIONS

Hold tool by insulated gripping surfaces when performing an operation where the

cutting tool may contact hidden wiring. Contact with a “live” wire will also make

exposed metal parts of the tool “live” and shock the operator.

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please

study them and learn their meaning. Proper interpretation of these symbols will

allow you to operate the tool better and safer.

SYMBOL

NAME

Volts

Amperes

Hertz

Watt

Kilograms

Alternating Current

Direct Current

EXPLANATION

Voltage (Potential)

Current

Frequency (Cycles per Second)

Power

Weight

Type of Current

Alternating or Direct Current Type of Current

Earthing Terminal

Class II Construction

Minutes

Seconds

Diameter

Grounding Terminal

Denotes Double Insulation

Time

Size of Drill Bits,

CONTROLS AND COMPONENTS:

1. Rocker Switch

2. Gear Enclosure

3. Brush Caps

4. Anvil

ACCESSORIES:

5. Impact Sockets (4)

6. Carbon Brushes (2) (not shown)

min

␾

Grinding Wheels, etc.

No load speed

No-load Rotational Speed

.../min

Revolutions per Minute

Revolutions, Surface Speed,

Strokes, etc. per Minute

COMPONENT

CARBON BRUSHES

MODEL NUMBER

690296

1,2,3, …

Ring Selector Settings

Speed, Torque or Position Settings

Download from Www.Somanuals.com. All Manuals Search And Download.

ROCKER SWITCH AND DIRECTION OF ROTATION

• To rotate the Impact Wrench

in a clockwise direction, press

the lower portion of the

Rocker Switch.

MAINTENANCE AND CLEANING

Always UNPLUG the Impact Wrench from power source

before attempting cleaning or maintenance.

• To rotate the Impact Wrench

in a counter-clockwise

direction, press the upper

portion of the Rocker Switch.

CLOCKWISE

This Impact Wrench is lubricated before it leaves the

factory. This lubrication should last for the life of the tool. No further

lubrication is required.

COUNTER-CLOCKWISE

ROCKER

SWITCH

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get

inside the casing. Never immerse any part of the tool in a liquid. Always keep the

ventilation openings clear.

Brushes will wear with use and should be inspected periodically by qualified

personnel. Unscrew the plastic caps on the sides of the motor housings to inspect

the spring and brush assembly. If the brushes are worn down to the line closest to

the spring, replace them immediately.

Regularly clean the ventilation slots in your tool and charger using only a soft

brush or dry cloth.

Never open the Impact Wrench case. Do not attempt to repair the Impact Wrench

yourself. Opening this tool will void your warranty.

INSTALLING / REMOVING SOCKET

When installing a socket,

ACCESSORIES

align the holes in the side

of the socket with the dent

pin. Press the socket on until

the dent pin engages in the hole.

To remove a socket, depress

the dent pin through the hole

using a small pointed object, and

pull the socket off.

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may become hazardous when used on

another tool.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry

the amount of current necessary for your power tool. If not, your tool may experi-

ence a loss of power, excessive voltage drop or overheating. The smaller the gauge

number, the heavier the cord (see table below).

When removing the socket or bit

from the tool, avoid contact with

skin and use proper protective

gloves when grasping the socket,

bit or accessory. Accessories may

be hot after prolonged use.

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

TOOL CURRENT RATING

CONDUCTOR SIZE IN A.W.G

AMPERE

3-6

6-8

8-10

10-12

12-16

16-20

10FT.

25FT.

50FT.

100FT.

Download from Www.Somanuals.com. All Manuals Search And Download.

component thereof is modified or altered. This warranty does not apply to any

other product and/or component thereof manufactured or distributed by Alltrade,

and does not apply to products and/or components thereof designed, manufactured

and/or assembled by others, for which Alltrade makes no warranties whatsoever.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON

THE FACE HEREOF.

SPECIFICATIONS

Voltage

120V

60 Hz

Rated Current

No-Load Speed

Impacts Per Minute

Maximum Torque

7.0A

2100/min

2700

Warranty Performance

By purchasing the product, purchaser expressly acknowledges and agrees that their

sole and exclusive remedy under this warranty shall be strictly limited to the repair

or replacement of any covered nonconforming items or parts thereof provided that

any such nonconforming item and/or part is promptly returned to Alltrade’s facility

postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,

1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #310-522-9008)

within the applicable warranty period, with a written request by purchaser that

Alltrade repair and/or replace the nonconforming item and/or part. We recommend

that you keep the original product packaging in the event you need to ship the unit.

We suggest the package be insured against loss or in transit damage. When

sending your product include your name, address, phone number, dated proof

of purchase (or copy), and a statement about the nature of problem. Warranty

coverage is conditioned upon purchaser furnishing Alltrade with adequate written

proof that they are the original purchaser and of the original purchase date. Parts

returned, freight prepaid and insured, to Alltrade’s facility (see above address) will

be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if

found to be defective and subject to warranty. Alltrade retains the sole discretion

to determine whether any item or part is nonconforming and, if so, whether the

item and/or part will be repaired and/or replaced. If the unit is repaired, new or

reconditioned replacement parts may be used. If Alltrade chooses to replace

the product, it may replace it with a new or reconditioned one of the same or

comparable design. The repaired or replaced unit will be warranted under the terms

of the remainder of the warranty period. Typically, a defective product that is

returned within the first 30 days after the purchase date will be replaced; for items

returned after the first 30 days and within the warranty period, covered defective

parts not subject to normal wear and tear or other exclusions will be repaired or

replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-

ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-

conforming item and/or part thereof shall constitute fulfillment of all

obligations to the purchaser. Alltrade shall not be responsible or liable for any

expense, including freight charges, or repairs made outside Alltrade’s facility, unless

expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade

bear any responsibility for loss of the unit, loss of time or rental, inconvenience,

commercial loss or consequential damages.

220 ft.lbs.

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS

Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would

like further information on the following products, please contact Alltrade Customer

Service Department at 1-800-590-3723.

Cordless Drills/Screwdrivers

Impact Wrenches

Sanders

Reciprocating Saws

Routers

Rotary Tools

Jigsaws

Corded and Cordless Multi-Purpose Tools

Wide Range of Accessories and more

Circular Saws

Angle Grinders

3 YEAR LIMITED WARRANTY

Express and Exclusive Limited Warranty to Original Retail Buyer

Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail

purchaser of the accompanying KAWASAKI(tm) power tool and no one else all

parts of the product (except those parts referred to below which are specifically

excluded from such warranty (see Exclusions)) to be free from defects in materials

and workmanship for a period of three years from original date of purchase, except

that such warranty with regard to the battery shall be for a period of two years from

original date of purchase, unless the tool is used for commercial or rental

purposes.

SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE: The above

warranty for this Kawasaki(tm) power tool, including the battery, shall be effective

for only 90 days from the original date of purchase if this tool is used for any

COMMERCIAL OR RENTAL PURPOSE.

The date of purchase shall be the date of shipment to the original purchaser, or the

date the original purchaser took possession, custody or control of the product,

whichever occurred first. This warranty shall be null and void if the product or any

Download from Www.Somanuals.com. All Manuals Search And Download.

Exclusions

WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR

IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE

AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,

PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT

THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,

GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY

OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF

ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING

BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE

WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY

EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.

PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH

WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING

THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE

REMEDY IS AS STATED ABOVE.

This warranty does not cover parts damaged due to normal wear, abnormal

conditions, misapplication, misuse, abuse, accidents, operation at other than

recommended pressures or temperatures, improper storage or freight damage.

Parts damaged or worn by operation in dusty environments are not warranted.

Failure to follow recommended operating and maintenance procedures also

voids warranty.

This limited warranty does not apply to accessory items such as drill bits,

screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding

sheets and other related items.

DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,

NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS

OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,

USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,

COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO

PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS

WARRANTY.

Limitation Of Liability

IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR

INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY

KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH

OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS

REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,

AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR

OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS

REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH

DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,

WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL

ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF

THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF

THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY

PERIODS SPECIFIED ABOVE.

Alltrade will not be liable for the following: labor charges, loss or damage resulting

from improper operation, maintenance or repairs made by other persons;

pre-delivery services such as assembly, oil or lubricants, and adjustment;

maintenance services that are normally required to maintain the product.

The use of other than genuine Alltrade Repair Parts will void warranty.

Warranty Disclaimers

EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,

GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY

PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR

REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING

THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE

PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF

WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,

WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY

ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE

BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE

AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY

WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR

CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S

SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.

Limitations on Warranty Disclaimers

Some states do not allow limitations on how long an implied warranty lasts

and some states do not allow the exclusion or limitation of the incidental or

consequential damages, so part or all of the above limitations or exclusions may not

apply to you. This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state.

If your product is not covered by this warranty, please call our Customer Service

Department at 1-310-522-9008 or toll free at 1-800-590-3723 for general repair

information and charges.

EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE

Download from Www.Somanuals.com. All Manuals Search And Download.

COMPONENT

#840055

19.2V 2-SPEED

BATTERY-OPERATED DRILL

INSTRUCTION MANUAL

THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,

MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND

UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO

SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.

FOR CUSTOMER SERVICE

POUR LE SERVICE APRÉS VENTE

OU DU CONSOMMATEUR

IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE

PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE

DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION

AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE

REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE

A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.

YOUR FEEDBACK IS VITAL TO US.

87-1904-60957

KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™

MOTORS CORP., U.S.A., WHICH DOES NOT MANUFACTURE OR

DISTRIBUTE THIS PRODUCT. CONSUMER INQUIRES SHOULD BE

DIRECTED TO:

PARA EL SERVICIO

PARA EL CONSUMIDOR

1431 VIA PLATA

LONG BEACH, CA 90810-1462 USA

1-800-590-3723

Printed in China

840055 – 19.2V Cordless Drill_Rev. 2/7/08

Download from Www.Somanuals.com. All Manuals Search And Download.

SECTION FOUR

MAINTENANCE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-18

TABLE OF CONTENTS

CONGRATULATIONS! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

INTENDED USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SECTION ONE

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

PROTECTING THE ENVIRONMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS . . . . . . . . . . . . . . 19

GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS . . 2

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS . . . . . . . . 2-3

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

WORK AREA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ELECTRICAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

PERSONAL SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

TOOL USE AND CARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

SECTION TWO

SECTION FIVE

2 YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-22

CONGRATULATIONS!

Thanks for choosing this product. At Alltrade, our aim is to provide you with quality

products at an affordable price, and we want you to be totally satisfied with your

product and our Customer Service. If any help and advice is needed, please

years of satisfaction.

SPECIFIC SAFETY RULES AND/OR SYMBOLS . . . . . . . . . . . . . . . . . . 7

SAFETY RULES FOR CORDLESS DRILL/DRIVERS . . . . . . . . . . . . 7

SYMBOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

SECTION THREE

INTENDED USE

This tool is intended for consumer use only. Your charger and/or adapter has been

designed for charging batteries of the type approved and supplied with this tool.

FUNCTIONAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-12

REMOVING/ATTACHING BATTERY PACK . . . . . . . . . . . . . . . . . . . 11

CHARGER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

CHARGING BATTERY PACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

INSTALLING DRILL BIT INTO KEYLESS CHUCK . . . . . . . . . . . . . . 13

OPERATING THE DRILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-17

VARIABLE SPEED TRIGGER SWITCH . . . . . . . . . . . . . . . . . . . . . . . 14

FORWARD/REVERSE AND TRIGGER LOCK LEVER . . . . . . . . . . . . 14

TORQUE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

HIGH/LOW SPEED (GEAR) SHIFTING . . . . . . . . . . . . . . . . . . . . . . 15

SCREWDRIVING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DRILLING METAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DRILLING MASONRY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

DRILLING WOOD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

HINTS FOR OPTIMUM USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17

GENERAL SAFETY RULES – FOR ALL BATTERY OPERATED TOOLS

READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to

follow all instructions listed below may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS FOR

FUTURE REFERENCE.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

The safety instructions provided in this manual are not intended to cover all possible

conditions and practices that may occur when operating, maintaining and cleaning

power tools.

Always use common sense and pay particular attention to all the DANGER,

WARNING, CAUTION and NOTE statements of this manual.

This is the safety alert symbol. It is used to alert

you to potential personal injury hazards. Obey all

safety messages that follow this symbol to avoid

possible injury or death.

Download from Www.Somanuals.com. All Manuals Search And Download.

WORK AREA

DANGER indicates an imminently hazardous

situation which, if not avoided, will result in death

or serious injury.

Keep your work area clean and well lit. Cluttered work benches and dark work

areas may cause accidents or injury.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

Do not operate power tools in explosive areas, such as in the presence of

flammable liquids, gases or dust. Power tools create sparks which may ignite

the dust or fumes.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury.

Keep bystanders, children and visitors away while operating a power tool.

Distractions can cause you to lose control.

CAUTION used without the safety alert symbol

indicates a potentially hazardous situation which,

if not avoided, may result in property damage.

ELECTRICAL SAFETY

NOTE provides additional information that is useful

for proper use and maintenance of this tool. If a

NOTE is indicated make sure it is fully understood.

Do not abuse the cord. Never use the cord to carry the tool, pulling or unplug-

ging the power tool. Keep the cord away from heat, oil, sharp edges, or mov-

ing parts. Replace damaged cords immediately. Damaged cords may create

a fire.

IMPORTANT SAFEGUARDS

Damaged or entangled cords increase the risk of electric shock.

A battery operated tool with integral batteries or a separate battery pack

must be recharged only with the specified charger for the battery. A charger

that may be suitable for one type of battery may create a risk of fire when used with

another battery.

People with electronic devices, such as pacemakers, should consult their

physician(s) before using this product. Operation of electrical equipment in

close proximity to a heart pacemaker could cause interference or failure of

the pacemaker.

Use battery operated tool only with specifically designated battery pack. Use of

any other batteries may create risk of fire.

WARNING: Some dust created by power sanding, sawing, grinding, drilling and

other construction activities contains chemicals known to the State of California

to cause cancer, birth defects or other reproductive harm.

Power tool plugs must match the outlet. Never modify the plug in any way. Do

not use any adapter plugs with grounded power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

Some examples of these chemicals are:

• Lead from lead-based paints.

Avoid body contact with grounded surfaces such as pipes, radiators, ranges

and refrigerators. There is an increased risk of electric shock if your body is

grounded.

• Crystalline silica from bricks and cement and other masonry products,

and arsenic and chromium from chemically-treated lumber.

Do not expose power tools to rain or wet conditions. Water entering a power

tool will increase the risk of electric shock.

Your risk from these exposures varies, depending on how often you do this type

of work. To reduce your exposure to these chemicals: work in a well ventilated

area, and work with approved safety equipment, such as dust masks that are

specially designed to filter out microscopic particles.

When operating a power tool outdoors, use an extension cord suitable for

outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric

shock.

WARNING: Handling the power cord on corded products may expose you to

lead, a chemical known to the State of California to cause cancer and birth

defects or other reproductive harm. Wash hands after handling.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERSONAL SAFETY

Recharge only with the charger specified by the manufacturer. A charger that

is suitable for one type of battery pack may create a risk of fire when used with

another battery pack.

Stay alert, watch what you are doing, and use common sense when operat-

ing a power tool. Do not use tool while tired or under the influence of drugs,

alcohol or medication. A moment of inattention while operating power tools

may result in serious personal injury.

Use power tools only with specifically designated battery packs. Use of any

other battery packs may create a risk of injury and fire.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair.

Keep your hair, clothing, and gloves away from moving parts. Loose clothes,

jewelry or long hair can be caught in moving parts.

When battery pack is not in use, keep it away from other metal objects like

paper clips, coins, keys, nails, screws, or other small metal objects that can

make a connection from one terminal to another. Shorting the battery termi-

nals together may cause burns or a fire.

Avoid accidental starting. Be sure switch is in the locked or “OFF” position before

inserting battery pack. Carrying power tools with your finger on the switch or insert-

ing battery pack into a tool with the power switch “ON” invites accidents.

Under abusive conditions, liquid may be ejected from the battery, avoid con-

tact. If contact accidentally occurs, flush with water. If liquid contacts eyes,

additionally seek medical help. Liquid ejected from the battery may cause irrita-

tion or burns.

Remove adjusting keys or wrenches before turning the tool “ON”. A wrench or a

key that is left attached to a rotating part of the tool may result in personal injury.

Do not overreach. Keep proper footing and balance at all times. Proper foot-

Store idle tools out of reach of children and other untrained persons. Tools

ing and balance enable better control of the tool in unexpected situations.

are dangerous in the hands of untrained users.

Use safety equipment. Always wear eye protection. Dust mask, non-skid safe-

ty shoes, hard hat, or hearing protection must be used for appropriate conditions.

When battery pack is not in use, keep it away from other metal objects like:

paper clips, coins, keys, nails, screws, or other small metal objects that can

make a connection from one terminal to another. Shorting the battery termi-

nals together may cause sparks, burns or a fire.

If devices are provided for the connection of dust extraction and collection

facilities, ensure these are connected and properly used. Use of these

devices can reduce dust-related hazards.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained

tools with sharp cutting edge are less likely to bind and are easier to control.

TOOL USE AND CARE

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

Use clamps or other practical ways to secure and support the workpiece to a

stable platform. Holding the work by hand or against your body is unstable and

may lead to loss of control.

Use only accessories that are recommended by the manufacturer for your

model. Accessories that may be suitable for one tool may create a risk of injury

when used on another tool.

Do not force tool. Use the correct tool for your application. The correct tool

will do the job better and safer at the rate for which it is designed.

SERVICE

Do not use the tool if the power switch does not turn it “ ON” or “ OFF” . A tool

that cannot be controlled with the switch is dangerous and must be repaired.

Tool service must be performed only by qualified repair personnel. Service

or maintenance by unqualified personnel may result in a risk of injury.

Disconnect battery pack from tool or place the switch in the locked or “ OFF”

position before making any adjustments, changing accessories, or storing

the tool. Such preventative safety measures reduce the risk of starting the tool

accidentally.

When servicing a tool, use only identical replacement parts. This will ensure

that the safety of the power tool is maintained. Follow instructions in the

Maintenance section of this manual. Use of unauthorized parts or failure to fol-

low Maintenance Instructions may create a risk of shock or injury.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFIC SAFETY RULES AND/OR SYMBOLS

SYMBOLS

IMPORTANT: Some of the following symbols may be used on your tool. Please

study them and learn their meaning. Proper interpretation of these symbols will

allow you to operate the tool better and safer.

Hold tool by insulated gripping surfaces when per-

forming an operation where the cutting tool may contact hidden wiring.

Contact with a “live” wire will also make exposed metal parts of the tool

“live” and shock the operator.

SYMBOL

NAME

EXPLANATION

Volts

Amperes

Hertz

Voltage (Potential)

Current

Frequency (Cycles per Second)

Power

Weight

Type of Current

SAFETY RULES FOR CORDLESS DRILL / DRIVERS

Watt

Always wear safety goggles or eye protection when using this tool. Use a

dust mask or respirator for applications which generate dust.

Kilograms

Alternating Current

Direct Current

Do not grasp the tool or place your hands too close to the spinning chuck or

drill bit. Your hand may be lacerated or may cause injury.

Alternating or Direct Current Type of Current

Secure the material being worked on. Never hold it in your hand or across

your legs. Unstable support can cause loss of control and injury.

Earthing Terminal

Class II Construction

Minutes

Seconds

Diameter

Grounding Terminal

Denotes Double Insulation

Time

Size of Drill Bits,

min

␾

Position yourself to avoid being caught between the tool or side handle and

walls or posts. Should the socket or bit become bound in the work, the reac-

tion torque of the tool could crush your hand or leg.

Grinding Wheels, etc.

No-load Rotational Speed

Revolutions, Surface Speed,

Strokes, etc. per Minute

Speed, Torque or Position Settings

Check to see that keys and adjusting wrenches are removed from the

Cordless Drill before switching the tool “ ON” . Keys or wrenches can fly away

at high velocity striking you or a bystander.

No load speed

Revolutions per Minute

.../min

When using the Cordless Drill, always maintain a firm grip on the tool with

both hands.

1,2,3, …

Ring Selector Settings

Hold tool by insulated gripping surfaces when performing an operation

where the cutting tool may contact hidden wiring. Contact with a "live" wire

will also make exposed metal parts of the tool "live" and shock the operator.

Keep the handle of the Cordless Drill dry, clean, and free from oil and grease.

Do not run the Cordless Drill while carrying it at your side. A spinning sock-

et or bit could become entangled with clothing and injury may result.

Disconnect the plug or remove the battery pack from tool and place the switch in

the locked or “OFF” position before making any assembly adjustments, changing

accessories, performing any inspection, maintenance or cleaning procedures.

Such preventive safety measures reduce the risk of starting the tool accidentally.

Do not use the Cordless Drill if it has been damaged, left outdoors in the

rain, snow, wet or damp environments, or immersed in liquid.

Maintain labels and nameplates on the Cordless Drill. These carry important

information. If unreadable or missing, contact Alltrade for a replacement.

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNCTIONAL DESCRIPTION

BATTERY

Before using battery pack, please read carefully all instruc-

tions and cautionary markings on battery pack, battery

charger and product using battery.

Do not incinerate the battery pack even if it is severely

damaged or is completely worn out. The battery pack can

explode.

Do not carry battery packs in aprons, pockets, or tool boxes, product kit

boxes, drawers, etc. with loose metal objects. Battery pack terminals could

be short circuited causing damage to the battery pack, severe burns or fire.

The battery pack is Nickel-Cadmium (Ni-Cad) and is considered to be a toxic

material by the Environmental Protection Agency. Before disposing of dam-

aged or worn out Ni-Cad battery packs, check with your State Environmental

Protection Agency to find out about special restrictions on the disposal of these

battery packs, take them to your local recycling center for proper disposal, or

call 1-800-822-8837.

CONTROLS AND COMPONENTS:

1. Battery Pack

9. High/Low Speed Switch

The battery is not fully charged. Before first use, the battery pack requires

8-10 hours charge time to be fully charged. Subsequent recharging needs 3-5

hours for the battery to be fully charged.

10. Variable Speed Controlled

Trigger Switch

2. Release Buttons on Each Side

3. 120V AC Adapter

11. Accessory/Bit Holder

12. Comfort Rubber Grip

13. Led Light

4. Charger

5. LED Charging Indicator

6. 10mm (3/8") Keyless Chuck

Always switch to a fresh battery when tool performance begins to diminish.

Severe heat is most destructive to a battery; the more heat generated, the faster

the battery loses power. A battery that gets too hot can have a shortened life.

7. 24+1 Adjustable Torque Settings

Control Ring

8. Forward/Reversing and

Trigger Lock Lever

Never over-discharge a battery by using the tool even after tool performance

has decreased. Do not attempt to discharge a tool’s battery by continuing to

pull on the tool trigger. When tool performance begins to diminish, stop the tool

and recharge the battery for optimal performance.

ACCESSORIES:

14. Double Ended Screwdriver Bits (2)

Charge battery pack at ambient temperatures between 50° F – 104° F.

COMPONENT

BATTERY PACK

120V AC ADAPTER

CHARGER

MODEL NUMBER

Store tool and battery pack in locations where temperatures will not exceed

120°F. This is important to prevent serious damage to the battery cells.

691235

690074

690072

The battery pack should always be recharged when the Cordless Drill begins to

run slowly.

10mm (3/8") KEYLESS CHUCK 690076

When battery pack is not in use, keep it away from other metal objects such as

paper clips, coins, keys, nails, screws or other small metal objects that can

make a connection from one terminal to another. Shorting the battery terminals

together may cause sparks, burns, or fire.

Download from Www.Somanuals.com. All Manuals Search And Download.

When the battery pack requires recharging, a 3-5 hour charge allows the tool to

operate at full power. A charging indicator light on the charger will illuminate to

show that charging is taking place.

REMOVING/ATTACHING BATTERY PACK

REMOVE BATTERY PACK:

1. Press both release buttons on either side of

the Cordless Drill to release the battery pack.

CHARGING BATTERY PACK

2. Pull battery pack free of Cordless Drill.

BATTERY PACK

CHARGE BATTERY PACK:

ATTACH BATTERY PACK:

1. Make sure the trigger

on the Cordless Drill

1. Align the raised portion of the battery pack

with the groove in the battery compartment

of the Cordless Drill.

is in the “ OFF” position

and remove the battery

pack from the Cordless Drill.

120V AC

ADAPTER

2. Press the battery pack into place. Make sure

the latches are securely fastened. Do not use

the Cordless Drill if the battery pack is not

seated properly.

RELEASE

BUTTON

2. Plug 120V AC Adapter

into household outlet

LED LIGHT

and into side of battery

charger. Insert battery

pack into battery charger.

When the battery is placed in

the charger, the red LED

indicator light will remain on.

BATTERY

CHARGER

3. When fully charged, reattach battery pack onto Cordless Drill, making certain

latches fasten securely. Cordless Drill will not operate properly if the battery

pack is not seated properly.

Before using battery charger, please read carefully all

instructions and cautionary markings on battery charger, battery pack and

product using battery.

The charger will not automatically turn “ OFF” when the

battery pack is fully charged. The charging indicator light will remain “ ON”

until the charger is disconnected from the electrical outlet.

ASSEMBLY

Be aware that this tool is always in an operating condition

because it does not have to be plugged into an electrical outlet. Always turn

the switch “ OFF” and remove the battery pack before changing bits.

Use only the charger which accompanied your product or direct replacement as

listed in this manual. Do not substitute any other charger. Use only Alltrade

approved chargers with your product.

Do not disassemble charger.

Do not use charger if it has been damaged, left outdoors in the rain, snow, wet

or damp environments, or immersed in liquid.

The battery pack and charger heat during charging. Place the charger on a flat,

non-flammable surface away from flammable materials with at least four inches of

clearance to allow proper air circulation around the charger and battery pack.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLING DRILL BIT INTO KEYLESS CHUCK

VARIABLE SPEED TRIGGER SWITCH

THIS TOOL IS CONTROLLED

WARNING

BY A TRIGGER SWITCH:

Before inserting a drill bit or other accessory, make sure the forward/reverse

and trigger lock lever is in the center “ OFF” position to prevent accidental starts

that may result in injury.

• The speed of the Cordless Drill depends

on the amount of pressure you put on the

trigger.

TRIGGER

SWITCH

Do not attempt to tighten drill bits (or any other accessory) by gripping the

front of the chuck and turning the tool on. This may cause personal injury

and/or damage to the chuck.

• The more pressure you apply, the faster

the Cordless Drill will go.

LED LIGHT

• Release the pressure and the Cordless

Drill will slow down.

When removing the bit from the tool, avoid contact with skin and use proper

protective gloves when grasping the bit or accessory. Accessories may be hot

after prolonged use.

BUILT IN LED LAMP

• Press the trigger switch to light up the lamp. The lamp remains on while the

trigger switch is being pressed. The lamp goes out after releasing the trigger.

1. Hold the rear end of the chuck in

HOLD HERE

one hand and use the other hand to

RELEASE

rotate the front end in a counter-

NOTE: Use a dry cloth to wipe the dirt off the lens of lamp. Be careful not to scratch

the lens of lamp, or it may lower the illumination.

clockwise direction to open the jaws

of the chuck.

2. Insert the shank of the bit (or other

Do not look into light or see the source of light directly.

GRIP

accessory) fully into the keyless

chuck, taking care to keep the bit in

the center of the jaws of the chuck.

FORWARD/REVERSE AND TRIGGER LOCK LEVER

HOLD HERE

3. Turn the front end of the chuck clockwise to hold the bit in place.

4. Tighten securely by turning the front end of the chuck clockwise while holding

the rear end.

Be sure the trigger is released when changing the position of the lever.

Always store the tool in the “ LOCKED/OFF” position.

Always check the direction of the Cordless Drill's rotation before use.

OPERATING THE DRILL

TO SELECT THE DIRECTIONS

OF ROTATION:

• To select forward Cordless Drill

Never tape the trigger switch down to provide continu-

ous high speed. The tool may fail under such conditions causing fire or

personal injury.

rotation, press the trigger lock from

FORWARD

LOCK

left to right flat against the Cordless

Drill body.

REVERSE

TRIGGER

LOCK

• To select reverse, press the trigger

lock lever in the opposite direction.

• The center position locks the tool.

Download from Www.Somanuals.com. All Manuals Search And Download.

TORQUE SETTINGS

SCREWDRIVING

WHEN DRIVING FASTENERS:

• Always start slowly and gradually increase the speed of the Drill.

To prevent damaging the tool or driving screw too deep

into work piece, release the trigger when you feel the clutch slip.

• Release the trigger when you feel the clutch slip.

CONTROL RING

• Always keep the driver bit straight to prevent damage to the screw.

• Hold the Drill with both hands to ensure control if the bit should stick or slip.

THE CONTROL RING ADJUSTS THE LEVEL OF TORQUE:

• For light duty work, use lower settings.

• For heavy duty work, use higher settings.

• To prevent wood from splitting, drill pilot holes into the wood before driving

in the screws.

PROPER SETTING FOR DRIVING SCREWS:

1. Set the ring on the lowest

setting to begin.

DRILLING METAL

2. Try tightening the first screw.

If the drill drives smoothly,

proceed with the next screw.

WHEN DRILLING HARD METALS:

• Apply a lubricant, such as cutting oil, to the tip of the bit.

• Start with a small hole then enlarge to the required size. Make sure the bit is

actually cutting and not spinning in the hole as this will dull the edges of the bit.

3. If the Drill’s clutch slips,

increase the torque setting

and try again until the Drill

drives the screw without incident.

• Keep enough pressure on the bit to keep it drilling through the material.

DRILLING MASONRY

WHEN DRILLING MASONRY:

• Masonry can be brittle so be careful not to apply too much pressure and crack

the material.

HIGH/LOW SPEED (GEAR) SHIFTING

FOR LOW SPEED SETTING:

• Slide the switch on top of the

Drill to Position 1 for high

torque applications and driv-

ing screws.

LOW SPEED

HIGH SPEED

• Apply enough pressure to keep the bit cutting and not spinning in the hole as this

will dull the edges of the bit.

• Bricks and similar soft materials will require less pressure, concrete will require

much more.

FOR HIGH SPEED SETTING:

• Slide the switch to Position 2

for light duty projects.

DRILLING WOOD

Use twist bits to drill holes in wood. Make sure the bits are sharp. Pull the bits

out of the hole frequently to clear chips from the flutes as an overburdened bit

may overheat.

HINTS FOR OPTIMUM USE

DRILLING:

• Keep the right amount of pressure in a straight line with the drill bit. Too little and

the bit will spin without cutting, too much and the motor may stall.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Just before the drill tip breaks though the other side of the work piece drill more

slowly and decrease pressure on the tool. This will prevent stalling and leave a

cleaner hole.

Regularly clean the ventilation slots in your tool and charger using only a soft

brush or dry cloth.

Never open the Cordless Drill case, battery pack or charger. Do not attempt to

repair the Cordless Drill, battery pack or charger yourself. Opening any of these

parts will void your warranty.

• Use a block of wood to back up work pieces that may splinter.

• Use spade bits when drilling large diameter holes in wood.

• Use HSS drill bits when drilling in metal.

ACCESSORIES

• Use masonry bits when drilling in soft masonry.

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may become hazardous when used on

another tool.

• Use a lubricant when drilling metals other than cast iron, aluminum, copper,

and brass.

• When drilling, start the hole slowly, allowing the bit to drill deep enough to prevent

slipping at higher speeds.

Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.

If you must use an extension cord, be sure that the gauge is large enough to carry

the amount of current necessary for your power tool. If not, your tool may experi-

ence a loss of power, excessive voltage drop or overheating. The smaller the gauge

number, the heavier the cord (see table on next page).

• Never try to start a stalled Drill by clicking the trigger switch “ ON” and “ OFF” .

This may damage your tool.

• To reduce jamming, always keep the Drill running when pulling the bit out of a

finished hole.

RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS

SCREWDRIVING:

TOOL CURRENT RATING

CONDUCTOR SIZE IN A.W.G

• Always use the correct type and size of screwdriver bit.

AMPERE

3-6

6-8

8-10

10-12

12-16

16-20

10FT.

25FT.

50FT.

100FT.

• If screws are difficult to tighten, try applying a small amount of washing liquid or

soap as a lubricant.

• Always hold the tool and screwdriver bit in a straight line with the screw.

MAINTENANCE AND CLEANING

Always remove the battery pack before attempting

cleaning or maintenance.

This Cordless Drill is lubricated before it leaves the

factory. This lubrication should last for the life of the tool. No further

lubrication is required.

Use only mild soap and a damp cloth to clean the tool. Never let any liquid get

inside the casing. Never immerse any part of the tool in a liquid. Always keep the

ventilation openings clear.

Always clean the battery pack using only a dry cloth. Do not use liquids.

Always unplug the charger before cleaning it.

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS: This

Kawasaki™ portable power tool is offered as a home use tool and carries a HOME

USE WARRANTY. This tool is made for home use in the execution of

projects and repairs in and around the home. Use of the tool for COMMERCIAL

PURPOSES OR ON A JOBSITE is not covered under this warranty.

SPECIFICATIONS

Voltage

19.2V

No Load Low Speed

No Load High Speed

Torque Settings

Chuck Capacity

Charger Input

0-400/min.

0-1100/min.

24+1 Drill

The date of purchase shall be the date of shipment to the original purchaser, or the

date the original purchaser took possession, custody or control of the product,

whichever occurred first. This warranty shall be null and void if the product or any

component thereof is modified, altered or used for any commercial purpose or on

a jobsite. This warranty does not apply to any other product and/or component

thereof manufactured or distributed by Alltrade, and does not apply to products

and/or components thereof designed, manufactured and/or assembled by others,

for which Alltrade makes no warranties whatsoever. THERE ARE NO WARRANTIES

WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

Up to 10mm (3/8")

120V

60Hz

Charging Time

Battery Type

Approx. 3-5 hours

Ni-Cad

PROTECTING THE ENVIRONMENT

BATTERIES

Warranty Performance

Alltrade batteries can be recharged many times. At the end of their useful life,

recycle batteries with due care for our environment.

By purchasing the product, purchaser expressly acknowledges and agrees that their

sole and exclusive remedy under this warranty shall be strictly limited to the repair

or replacement of any covered nonconforming items or parts thereof provided that

any such nonconforming item and/or part is promptly returned to Alltrade’s facility

postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,

1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)