Jwin MP3 Player JX CD492 User Manual

R
PORTABLE CD PLAYER with MP3  
DIGITAL RADIO CASSETTE RECORDER  
MODEL JX-CD492  
OWNER’S MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRECAUTIONS  
CAUTION:  
To avoid electric shock, this unit must not be exposed to dripping or splashing water  
Minimum distances around the apparatus for sufficient ventilation;  
The ventilation should not be impeded by covering the ventilation openings with items, such as  
newspapers, table-cloths curtains, etc.  
No naked flame sources, such as lighted candles, should be placed on the apparatus;  
Before scrapping the appliance, remove the batteries and place them in the appropriate battery  
collection container.  
CAUTION  
CLASS 1 LASER PRODUCT  
LASER SAFETY  
This unit employs a laser. Only qualified service  
personnel should attempt repair.  
Use of Controls or adjustments or performance  
of procedures other than those specified herein  
may result in hazardous radiation exposure.  
DANGER: INVISIBLE LASER  
RADIATION WHEN OPEN AND  
INTERLOCK FAILED OR  
DEFEATED. AVOID DIRECT  
EXPOSURE TO BEAM.  
CLASS 1 LASER PRODUCT  
LUOKAN 1 LASERLAITE  
KLASS 1 LASERAPPARAT  
CAUTION: HAZARDOUS LASER  
RADIATION WHEN OPEN AND  
INTERLOCK DEFEATED.  
CAUTION  
CLEANING:  
Always disconnect unit from power supply before attempting to clean it.  
Use soft cloth moistened with soapy water, wipe gently.  
Do not use solvents or abrasive materials.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOCATION OF CONTROLS  
TOP VIEW  
1
3
5
7
9
1. DBBS ON/OFF Button  
2. FM Antenna  
2
4
6
8
3. Handle  
4. CD Door  
5. Cassette Control Buttons (PAUSE/STOP-  
EJECT/FFW/REW/PLAY/RECORD)  
6. CD Door Open Lid  
7. Volume Control  
8. FUNCTION Selector (TAPE -“CD/Radio  
Off” /RADIO/CD)  
9. FM STEREO/MONO Selector  
FRONT VIEW  
10. Cassette Door/Compartment  
11. Speakers  
12. FOLDER DN/M-DN Button  
13. STOP/BAND Button  
14. TUNING/CD SKIP DN/Backward Button  
15. CD/TUNER LCD Display  
16. Remote Sensor  
12  
14  
16  
18  
21  
20  
15  
17  
13  
19  
17. TUNING/CD SKIP UP/Forward Button  
18. PLAY/PAUSE Button  
19. Built-in Microphone  
11  
11  
20. FOLDER UP/M-UP Button  
21. PROG./MEM. Button  
10  
REAR VIEW  
25  
22  
22. Battery Door/Compartment  
23. Headphones  
23  
24  
24. AC Input Socket  
25.  
RESET Switch - If the set locked up, or  
does not display information, or the data  
displayed is wrong, press the “RESET”  
switch with a sharp object, e.g. needle etc.  
The data must then be re-entered.  
Note: Tuner memory would be lost  
when “RESET” switch pressed.  
1.5V x 8 UM 2 or  
“C” size or LR14  
Headphone Jack  
-
-
+
-
+
-
Headphone Jack “PHONES” (23) for headphones  
with 16-32 Ohm impedance (3.5mm jack). Use  
corresponding adaptors (Electronics shops) if you  
have different plugs. The speakers are  
automatically switched off when the headphones  
are being used.  
+
-
+
-
+
-
+
-
+
+
CAUTION:  
Listening at high power for long periods of time can damage users’ ears.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROLS  
30  
26. FOLDER UP/M-UP and FOLDER DN/M-CN  
Button  
27. PROG./MEM. Button  
28. CD PLAY/PAUSE Button  
29. PLAY MODE Button  
30. TUNER/CD SKIP DN/Backward Button  
31. TUNER/CD SKIP UP/Forward Button  
32. CD STOP/BAND Button  
29  
28  
31  
32  
27  
26  
BATTERY REPLACEMENT  
1. Remove the battery compartment cover.  
2. Insert two "AA" size / LR6 / UM-3  
batteries (not included) into the battery  
compartment and ensure the proper  
polarities are maintained.  
2
1
3. Replace the battery compartment cover.  
3
Battery Life  
To prevent damage due to battery leakage, the remote should be checked periodically as  
required.  
Damage due to battery leakage is not covered by the warranty.  
When the battery becomes weak, the remote control will not work, be sure to replace both  
batteries at the same time. We recommend ALKALINE batteries for longer usable life.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTION  
POWER ON/OFF  
RADIO  
1. To turn on the power, slide the FUNCTION selector (8)  
to your desired mode (RADIO, CD or TAPE with Play  
button pressed).  
(CD / RADIO OFF)  
TAPE  
CD  
2. To turn off the power, slide the FUNCTION selector (8)  
to TAPE position.  
RADIO  
(CD / RADIO OFF)  
TAPE  
CD  
BASIC OPERATION  
Volume Control  
Once the required station has been located, adjust  
the VOLUME controls (7) to the desired level.  
VOLUME  
DBBS Control  
Press the DBBS button (1) once to get a rich bass  
sound,  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
STORING PRESET STATIONS  
LISTENING TO THE RADIO  
1.  
Tune to the station you wish to store by  
pressing TUNING UP or DOWN button (14)/  
(17) or (30)/(31)  
1.  
Set the FUNCTION selector (8) to RADIO mode  
RADIO  
(CD / RADIO OFF)  
TAPE  
CD  
SKIP/  
SKIP/  
TUN DN  
TUN UP  
OR  
2.  
Press the BAND button (13) or (32) for AM or  
FM band.  
The unit enables you to program 10 stations of FM  
and 10 stations of AM band.  
Example : FM mode  
2. Press the PROGRAM button (21) or (27) once.  
(“MEMORY” flashing)  
3.  
Press the TUNING Up or Down button (14)/(17)  
or (30)/(31) to tune to the desired station.  
3. Press the FOLDER/M-UP or FLDER-DN button  
(20)/(12) or (26) repeatedly to set the desired  
preset station number. (“MEMORY” still  
flashing)  
SKIP/  
TUN DN  
SKIP/  
TUN UP  
OR  
Manual Tuning - Press and hold the TUNING  
UP or DOWN buttons (14)/(17) or (30)/(31) until  
the display approaches your desired station.  
Then tap the buttons repeatedly until the  
display shows the exact frequency.  
4.  
Press the PROGRAM button (21) or (27) again.  
The station is stored. (“MEMORY” steady on)  
Auto tuning - Press the TUNING forward or  
backward buttons momentarily and release.  
The tuner will move up or down to the next  
available station.  
4.  
When finished listening, slide the FUNCTION  
selector (8) to TAPE (RADIO/CD OFF) position.  
5.  
To store other stations, repeat above steps.  
RECALLING PRESET STATION  
Press the FOLDER/M-UP or FOLDER/M-DN  
(20)/(12) or (26) button on main unit or remote  
control repeatedly to select the desired station.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
To pause the CD  
PLAYING COMPACT DISCS  
Press the PLAY/PAUSE button while the disc is  
playing. Press it again to resume playing.  
1.  
Set the FUNCTION selector (8) to CD mode  
RADIO  
(CD / RADIO OFF)  
TAPE  
CD  
PLAY/PAUSE  
If there is no CD inside or disc damaged, a  
"- - -" display will be appear.  
2.  
While paused  
When there is no disc  
To stop the disc  
Loading a disc  
Press the STOP button (13) or (32).  
1. Lift the CD door lid (6) to open the CD door.  
STOP/BAND  
2.  
Put a disc inside and then close the CD door.  
After that, reading TOC will start.  
Note: Ensure the disc is pushed fully and  
locked in place.  
Stop condition (TOC display)  
After reading TOC  
Note: This unit is CD-R / -RW compatible.  
To play the disc  
Press the PLAY/PAUSE button (18) or (28) to play  
the CD.  
PLAY/PAUSE  
Playing track 1  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Skip and Search Function  
Press the SKIP Next or Back buttons (14)/(17) or (30)/(31) briefly.  
SKIP/  
SKIP/  
TUN DN  
TUN UP  
OR  
IN PLAY MODE  
IN STOP MODE  
PRESS ONCE  
PRESS ONCE  
PRESS TWICE  
B A C K T O T H E  
BEGINNING OF  
THE CURRENT  
TRACK  
PREVIOUS  
TRACK  
PREVIOUS  
TRACK  
NEXT TRACK  
NEXT TRACK  
Press and hold the SKIP button during playback :  
: FAST BACKWARD  
: FAST FORWARD  
NOTE : During search mode low level audio will be heard to assist in locating the  
correct point in the track.  
To repeat a track or disc  
Press the PLAY MODE button (29) on the remote  
control one time, "one track repeat" will be  
active.(REPEAT Flashes)  
One track repeat (flashing)  
PLAY/  
MODE  
With one more press, "all track repeat" will be active.  
(REPEAT ALL will show steadily)  
All track repeat (steady)  
With one additional press, the repeat mode is  
cancelled.  
PLAY/  
MODE  
Random play function  
In CD stop mode, press the PLAY MODE button  
(29) on remote control three times (RANDOM  
displayed), then press PLAY/PAUSE button (18) or  
(28) to start random play. Press PLAY MODE  
button (29) once again to change normal playing  
mode.  
Random playing start  
PLAY/  
MODE  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMED PLAYBACK  
This CD player enables you to program up to 20 tracks in the sequence of your choice. First select CD stop  
mode.  
1.  
4.  
Press the PROGRAM button (21) or (27) one  
time. (“MEMORY” flashes)  
Continue to program, repeat steps 2 and 3 for  
each selection.  
When program is full  
PROGR
Reviewing programs  
Press the PROGRAM button (21) or (27)  
repeatedly. The track number programmed on  
each program number will be displayed.  
2.  
Press the SKIP Forward or Backward button  
(14)/(17) or (30)/(31) to select the desired track  
to be programmed.  
5. Press PLAY/PAUSE button (18) or (28) to play  
the programmed tracks.  
SKIP/  
SKIP/  
TUN DN  
TUN UP  
OR  
Choose track 4  
Clear the program  
Press the PROGRAM button (21) or (27) to recall  
previously programmed track (“MEMORY” icon  
flashes), then press CD stop button to cancel the  
preset programs or change function mode or open  
the CD door.  
Press the PROGRAM button (21) or (27) one  
time, then the selected track, e.g., track 4 is  
stored.  
3.  
PROGRA
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING MP3 DISCS  
2. Press CD SKIP  
/
buttons (14)/(17)  
1.  
Set the FUNCTION selector (8) to CD mode  
or (30)/(31) to select desired track.  
RADIO  
(CD / RADIO OFF)  
TAPE  
CD  
SKIP/  
TUN DN  
SKIP/  
TUN UP  
OR  
If there is no disc inside or disc damaged, a  
"- - -" display will be appear.  
2.  
Folder 2 track 3 selected  
When there is no disc  
Loading a disc  
3. Press the PLAY/PAUSE button (18) or (28) to  
start playing.  
1. Lift up the CD door lid (6) to open the CD door.  
2.  
Put a disc inside and then close the CD door.  
After that, reading TOC will start.  
PLAY/PAUSE  
Note: Ensure the disc is pushed fully and  
locked in place.  
After reading TOC  
Playing track 3 of folder 2  
Note: This unit is CD-R / -RW compatible.  
To pause the CD  
Press the PLAY/PAUSE button (18) or (28) while  
the disc is playing. Press it again to resume playing.  
To play the disc  
1. Press the FOLDER UP or DN button (20)/(12)  
or (26) to select desired folder. Total tracks of  
select folder will then be shown.  
PLAY/PAUSE  
Folder 2 selected  
Tracks of folder 2  
While paused  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: Once your desired mode selected, press the  
PLAY/PAUSE button (18) or (28) to start playback  
from stop mode.  
To stop the disc playing  
Press STOP button (13) or (32).  
Stop condition (TOC display)  
5. Press the PLAY MODE button (29) on the  
remote control fifth for cancel above modes.  
STOP/BAND  
PROGRAMMED PLAYBACK  
This CD player enables you to program up to 20  
tracks in the sequence of your choice. First  
select CD stop mode.  
PLAY MODE for Repeat Track/Folder and  
Random Play Operation  
1. Press the PROG./MEM. Button (21) or (27) one  
time.  
1. Press the PLAY MODE button (29) on the  
remote control once for current track repeat.  
PLAY/  
MODE  
PROGR
Program input mode  
2. Press the PLAY MODE button (29) on the  
remote control twice for tracks in current folder  
repeat.  
PLAY/  
MODE  
2. Press the FOLDER UP or DN button (20)/(12)  
or (26) to select desired folder.  
Choose folder 3  
3. Press the PLAY MODE button (29) on the  
remote control third for tracks in all folder  
repeat.  
PLAY/  
MODE  
3. Press the CD SKIP  
or  
button (14)/  
(17) or (30)/(31) to select the desired track to be  
programmed.  
4. Press the PLAY MODE button (29) on the  
remote control fourth for tracks in random play  
mode.  
SKIP/  
TUN DN  
SKIP/  
TUN UP  
OR  
PLAY/  
MODE  
Choose track 4 in folder 3  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Press the PROG./MEM. button again, then track  
4 of folder 3 is stored.  
6. Press the PLAY/PAUSE button (18) or (28) to  
play the programmed tracks.  
Playing track 4 of folder 3  
PROGR
Note: Press the PROG./MEM. Button (if  
programmed tracks still exist) then PLAY/  
PAUSE button, the program play will start  
again.  
5. Continue to program, repeat steps 2 to 4 for  
each selection.  
Clear the program  
Press the PROGRAM button (21) or (27) to recall  
previously programmed track (“MEMORY” icon  
flashes), then press CD stop button to cancel the  
preset programs or change function mode or open  
the CD door.  
When Program is full  
Reviewing programs  
Press the PROG./MEM. button (21) or (27)  
repeatedly. The track number programmed on  
each program number will be displayed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLAYING CASSETTE TAPE  
3. To playback, press the PLAY button (5).  
1.  
Set the FUNCTION selector (8) to TAPE mode  
RADIO  
TAPE  
CD  
4. To stop Playback, press the STOP/EJECT  
button (5).  
2.  
Press STOP/EJECT button (5) to open the  
cassette door. Insert a prerecorded tape to the  
cassette compartment, close the cassette door.  
To suspend playback  
To Fast Forward or Rewind tape  
Press PAUSE button (5).  
Press REW or F.FWD button (5).  
To resume playback, press the PAUSE button  
again.  
TAPE RECORDING From TUNER  
TAPE RECORDING From CD or MP3  
1.  
Set the FUNCTION selector (8) to the TUNER  
mode.  
Select the FUNCTION selector (8) to CD mode  
then open the CD door by lift up door lid (6).  
1.  
2.  
Follow steps 2 and 3 in "LISTENING TO THE  
RADIO" to tune in the station you wish to  
record.  
Put a disc inside CD compartment and then  
close the CD door  
Insert a blank tape to cassette compartment  
then close the cassette door.  
2.  
3.  
3.  
4.  
Insert a blank tape to cassette compartment  
then close the cassette door.  
4. Press the RECORD and PLAY buttons (5).  
Press the RECORD and PLAY buttons (5) at  
same time to start recording.  
Press PLAY/PAUSE (18) or (28) to start CD  
playing for recording.  
5.  
6.  
Press STOP/EJECT (5) to stop recording.  
5.  
Press STOP/EJECT (5) to stop recording.  
7. Press the STOP/BAND button (13) or (32) to  
stop CD playing.  
Note:  
1. Return to Tape mode, rewind the tape  
to listen to recorded materials.  
2. Recording through built-in microphone  
(Tape mode): similar to  
above instructions.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CARE AND MAINTENANCE  
COMPACT DISC CARE  
Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in  
contact with the shiny, unprinted side of the disc.  
Do not attach adhesive tape, stickers etc., to the disc label.  
Clean the disc periodically with soft, lint-free, dry cloth. Never use detergents or adhesive cleaners  
to clean the disc. If necessary, use a CD cleaning kit.  
If disc skips or gets stuck on a section of the disc, it is probably dirty or damaged (scratched).  
When cleaning the disc, wipe in straight lines from the center of the disc to the edge of the disc.  
Never wipe in circular motions.  
To remove a disc from its storage case, press down on the center of the case and lift the disc out,  
holding it carefully by the edges.  
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a soft cloth.  
Unlike conventional records. compact discs have no grooves to collect dust and microscopic debris  
so gently wiping with a soft cloth should remove most particles.  
TAPE HEAD CLEANING  
The tape heads, pinch roller and capstan require periodic cleaning. This removes particles of the metal oxide  
coating that wear off the tape and accumulate on these parts and impair performance. Switch off the power,  
press the Stop/Eject Key to open the cassette door, and press the Play Key. Clean the tape heads, pinch roller  
and capstan with a soft cloth or cotton swab dampened in isopropyl alcohol or special tape head cleaner.  
NOTE: Never use any metal objects on or near the tape heads. Do not allow any cleaning material to fall into  
the tape assembly.  
CAPSTAN  
COTTON SWAB  
RECORD/PLAY HEAD  
PINCH ROLLER  
CLEANING THE UNIT  
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.  
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use caution  
when cleaning and wiping the plastic parts.  
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays  
on the cabinet.  
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth  
slightly dampened with a mild soap and water solution. Never use abrasive cloths or polishes as  
these will damage the finish of your unit.  
Caution: never allow any water or other liquids to get inside the unit while cleaning.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING GUIDE  
Should this unit exhibit a problem, check the following before seeking service.  
Possible cause  
Symptom  
Solution  
Radio  
Retune the AM or FM broadcast  
station.  
Noise or sound distorted on AM or Station not tuned properly for AM  
FM broadcasts.  
or FM  
FM : Antenna is not extended.  
Extend FM antenna.  
Rotate unit until best reception is  
obtained.  
AM : Unit is not positioned  
correctly.  
Set FUNCTION Selector to RADIO  
position.  
FUNCTION Selector not set to  
RADIO position.  
AM or FM, no sound.  
Volume at minimum  
Increase Volume.  
Cassette Player  
FUNCTION selector not set to Set FUNCTION selector to TAPE  
No sound.  
TAPE position.  
position.  
Increase Volume  
Volume at minimum  
Dirty Record/Play head.  
Clean the Record/Play head.  
Sound distorted.  
Speed varies  
Replace the tape.  
Tape old or worn.  
Dirty roller and capstan.  
Clean roller and capstan.  
Cassette Recorder  
Will not record.  
Press prevention tab removed  
Defective tape or dirty tapehead.  
Cover hole with tape  
Distorted sound on playback.  
Replace tape or clean tape head.  
Compact Disc Player  
CD Player will not play.  
FUNCTION selector not set to CD  
position.  
Set FUNCTION selector to CD  
position.  
CD is not installed or installed  
incorrectly.  
Insert CD with label side up.  
CD skips while playing.  
Disc is dirty or scratched.  
Wipe disc with cloth or use  
another disc.  
Disc inserted upside down.  
Disc is dirty.  
Insert disc properly.  
Clean disc.  
Disc is inserted but CD player  
skips over spot and will not play,  
Disc is non-standard.  
Use correct disc.  
SPECIFICATIONS  
Power Supply  
Power Output  
AC 120Volts ~ 60Hz  
DC 12V (1.5V x 8 UM2 or  
“C” size or LR14)  
Tape Section:  
Built-in ALC  
DC Bias/Magnet Erase  
Top Loading CD  
CD Section  
Speaker  
1.2W/CH with 10% THD  
3", 8 ohms  
Dimension of Unit 290(W)x233(D)x150(H)mm  
Remote Control  
8 Keys, Battery size "AA" x 2  
Radio Section  
Tuning : PLL with 20 Presets  
(FM 10, AM 10)  
Freq. Range : AM 520 - 1710KHz  
FM 87.5 - 108MHz  
Model No. ________________________________  
Serial No. _________________________________  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Init TV Video Accessories NT C1142 User Manual
Jacuzzi Hot Tub N875 LH User Manual
John Lewis Clothes Dryer JLDV 02 User Manual
Johnson Controls Furnace GG8SMP User Manual
Jura Capresso Coffeemaker Giga X9c Professional User Manual
JVC Car Video System KD AVX40 User Manual
KitchenAid Indoor Furnishings KKFV01SPCR User Manual
KitchenAid Oven KESS908SPB01 User Manual
Kodak Camera Accessories DS KSDMI4GBCSCAD User Manual
Korg TV Cables v201 User Manual