IMPRESSA F70/F7/F707
Instructions for use
4/05
Download from Www.Somanuals.com. All Manuals Search And Download.
Fig. 1
Fig. 2
Fig. 3
Fig. 8
Fig. 13
Fig. 4
Fig. 9
Fig. 14
Fig. 5
B
A
Fig. 6
Fig. 7
Fig. 10
2
3
1
B
Fig. 11
Fig. 12
Fig. 15
Fig. 16
Fig. 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Control elements
9
8
3
7
1. Rotary Switch
2. Illuminated ring
3. ON / OFF symbol
4. 1 LARGE CUP symbol
5. 1 COFFEE symbol
4
21 22 23
5
6
6. 1 ESPRESSO symbol
7. MAINTENANCE symbol
8. START symbol
11
12
13
9. Display dialog system
10. Water tank with handle
11. Filler funnel for pre-ground coffee
12. Bean tank cover
10
9
14
2
1
13. Aroma preservation cover
14. Steam / hot water draw-off tap
15. Replaceable 2-stage frothing jet
16. Replaceable hot water nozzle
17. Height-adjustable coffee spout
18. Coffee grounds container
19. Drip grate
15/16
17
18
20. Drip tray
24
21. MILD symbol
22. NORMAL symbol
23. STRONG symbol
19
24. Power switch
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1. Safety information..........................................page
6
6
6
6
6
6
6
7
7
7
7
8
9
9
9
15. Programming ...............................................page 15
15.1 Programming the filter ..........................page 15
15.2 Programming the water hardness .............page 15
15.3 Maintenance menu................................page 15
15.4 Programming the aroma INTENSIVE
1.1
1.2
Warning..............................................page
Precautions..........................................page
2. Preparing the IMPRESSA................................page
2.1
2.2
2.3
2.4
2.5
2.6
Check supply voltage..............................page
Check electrical fuse ..............................page
Fill water tank......................................page
Fill coffee beans....................................page
Adjusting the grinding gear .....................page
Power switch........................................page
or STANDARD ....................................page 16
15.5 Programming the temperature.................page 16
15.6 Programming the time...........................page 16
15.7 Programming the automatic
switch-on time .....................................page 17
3. First use.......................................................page
4. Adjusting the water hardness ............................page
5. Installation of Claris plus filter cartridges............page
15.8 Programming the automatic
switch-off time.....................................page 17
15.9 Cup counter ........................................page 18
15.10 Programming the language .....................page 18
15.11 Programming Display 24H/AM/PM ..........page 19
15.12 Programming the display for ML/OZ.........page 19
15.13 Exit programming mode ........................page 19
16. Maintenance.................................................page 20
16.1 Filling in water ....................................page 20
16.2 Emptying the coffee grounds container ......page 20
16.3 Drip tray missing..................................page 20
16.4 Fill coffee beans...................................page 20
16.5 Replacing the filter ...............................page 20
16.6 Cleaning the IMPRESSA .......................page 21
16.7 IMPRESSA calcified.............................page 21
16.8 General cleaning instructions...................page 21
16.9 Emptying the system .............................page 21
17. Cleaning......................................................page 21
17.1 Cleaning without display request ..............page 22
18. De-scaling....................................................page 22
18.1 Decalcifying without display request..........page 24
19. Disposal ......................................................page 24
20. Tips for perfect coffee ....................................page 24
21. Messages.....................................................page 25
22. Problems .....................................................page 26
23. Legal information..........................................page 27
24. Technical Data..............................................page 27
5.1
5.2
5.3
Installing the filter ................................page
Replacing the filter................................page
Changing the filter without display request..page 10
6. Rinsing the IMPRESSA...................................page 10
6.1
Rinsing the IMPRESSA
without display request ...........................page 10
E
7. Adjusting the water quantity for coffee................page 10
8. Making 1 cup of coffee....................................page 11
9. Making 2 cups of coffee...................................page 11
10. Drawing off pre-ground coffee ...........................page 12
11. Drawing off hot water .....................................page 12
12. Drawing off steam ..........................................page 13
13. Drawing off steam with the Professional-Cap-
puccino Frother or the Easy-Cappuccino Frother ...page 13
13.1 Attaching the Professional-Cappuccino
Frother or the Easy-Cappuccino Frother
to the IMPRESSA .................................page 13
13.2 Making cappuccino and hot milk
with the Professional-Cappuccino Frother ..page 14
13.3 Making cappuccino with the
Easy-Cappuccino Frother ........................page 14
13.4 Cleaning the Professional-Cappuccino
Frother and the Easy-Cappuccino Frother ...page 14
14. Switching off the IMPRESSA ...........................page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Ⅲ If you don’t use the machine for a longer time (holidays, etc.)
always disconnect the mains cable.
Introduction
Thank you for purchasing the IMPRESSA. To ensure perfect func-
tioning of your IMPRESSA, carefully read this operating manual
and keep it for future reference.
Should you need more information or if you encounter particular
problems not specified in these operating instructions in sufficient
detail, either contact us directly or contact your local authorized
dealer.
Ⅲ Always disconnect mains cable before cleaning the machine.
Ⅲ When disconnecting the mains cable never pull on the mains
cable or the machine itself.
Ⅲ The coffee machine is connected to mains supply via a mains
cable. Make sure nobody can trip over the mains cable. Make
sure children and pets cannot reach the machine
Ⅲ Never put the coffee machine or individual parts of it into a
dishwasher.
You will also find useful tips on operation and maintenance
Ⅲ Make sure to install the machine at a place with sufficient air
circulation, to prevent overheating of the machine.
1. Safety information
1.1 Warning
2. Preparing the IMPRESSA
2.1 Check supply voltage
Ⅲ Children do not realize the dangers involved in using electric
appliances, for this reason always keep an eye on children when
they use electric appliances.
The IMPRESSA is preset in the factory to the correct mains
voltage. Check if your local mains supply voltage complies with
the information given on the type plate on the underside of the
IMPRESSA.
Ⅲ The coffee machine may only be used by instructed persons.
Ⅲ Never use a defective coffee machine or a machine with a
defective mains cable.
2.2 Check electrical fuse
Ⅲ Never repair or open the coffee machine yourself. Any repairs
may only be carried out by authorized service shops using ori-
ginal spare parts and accessories.
The IMPRESSA is designed for an electric current of 10 amperes.
Check if the electrical fuse has sufficient capacity.
Ⅲ Never immerse the coffee machine in water.
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water
or other liquids.
1.2 Precautions
Ⅲ Never expose the coffee machine to weather (rain, snow, frost),
never touch the machine when your hands are wet.
Ⅲ Remove the water tank and rinse it with cold tap water
thoroughly (Fig. 4).
Ⅲ Place the IMPRESSA on a firm, level base that is resistant to
any water that may leak. Never stand on hot or warm surfaces
(oven hobs). Keep out of the reach of children.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Ⅲ Then fill the water tank and reinstall it. Make sure to install the
tank properly, it must engage audibly.
2.6 Power switch
Actuate the power switch (24) on your IMPRESSA before
using the machine for the first time.
2.4 Fill coffee beans
We recommend that you switch off your IMPRESSA with
the power switch (24) if you intend not to use the machine
for longer periods of time (e.g.during holidays).
To ensure that your machine will work perfectly for a long
time and to avoid damage, please note that the grinding gear
of your JURA coffee machine is not suitable for coffee beans
which were treated, during or after roasting, with additives
(e.g. sugar). Such coffee blends may damage the grinding
gear. Any repair costs resulting from the use of such blends
are not covered by warranty.
3. First use
Ⅲ Fill coffee beans in the bean tank (12).
Ⅲ Switch on the IMPRESSA using the power switch (24).
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Ⅲ
Your IMPRESSA is in standby mode.
Ⅲ Remove any dirt or foreign matter from the bean tank.
Ⅲ Fill coffee beans in the bean tank and close the cover.
Ⅲ Touch the
(3) symbol
Ⅲ
SPRACHE
DEUTSCH
E
2.5 Adjusting the grinding gear
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the rotary switch (1) until the required language is dis-
played (Fig. 17).
You can adjust the grinding gear to the roast of your coffee. We
recommend
Ⅲ For example
LANGUAGE
ENGLISH
a fine grinding degree Ǟ for bright roasts (the smaller the dots,
the finer the grinding)
a coarse degree
Ǟ
for dark roasts (the larger the dots, the
coarser the grinding)
Ⅲ Confirm your selection by pressing the rotary switch (1) (Fig. 17).
Ⅲ
FILL
WATER
The grinding degree may only be adjusted while the grinding
gear is running.
Ⅲ Fill the water tank (10) with fresh water.
OPEN TAP
Ⅲ
Ⅲ Open the bean tank cover (12) and remove the aroma preser-
vation cover (13).
Ⅲ Place an empty cup under the replaceable hot water nozzle (16).
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ To adjust the grinding degree, turn the rotary switch (Fig. 2) to
the required position.
Ⅲ
FILLING
SYSTEM
Ⅲ
CLOSE TAP
Download from Www.Somanuals.com. All Manuals Search And Download.
7
The displayed information means the following:
LEVEL –– Water hardness function switched off
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ
Ⅲ
Ⅲ
FILLING SYSTEM
HEATING
LEVEL 1 German water hardness degree 1 to 7°
French Water hardness degree 1.79 – 12.53°
PRESS
LEVEL 2 German water hardness degree 8 to 15°
French Water hardness degree 14.32 – 26.85°
MAINT.
Ⅲ Touch the symbol
(7).
LEVEL 3 German water hardness degree 16 to 23°
French Water hardness degree 28.64 – 41.14°
Ⅲ Machine carries out a rinsing operation.
Ⅲ
Ⅲ
RINSING
READY
LEVEL 4 German water hardness degree 24 to 30°
French Water hardness degree 42.96 – 53.7°
If BEANS FILL is displayed, press the coffee draw-off key
again. Machine not filled with coffee beans yet.
When the IMPRESSA leaves the factory it is adjusted to LEVEL
3. You can adjust another hardness. To do this, proceed as follows:
Ⅲ
READY
To get an excellent froth, adjust the coffee spout (17) to the
size of your cup (Fig. 3).
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears 4. Adjusting the water hardness
Ⅲ
FILTER –
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Water is heated in the IMPRESSA. As a result, calcification
occurs during normal use and is indicated automatically.
Before using the IMPRESSA for the first time the hardness
of the water used must be adjusted. Use the supplied test
sticks for this.
Ⅲ
HARDNESS
Ⅲ Now press the Rotary Switch (1) to start the programming.
LEVEL 3
Ⅲ Turn the Rotary Switch (1) until the required level is displayed.
Ⅲ For example, LEVEL 4
Ⅲ Press the Rotary Switch (1) to confirm the required level.
HARDNESS
Ⅲ
1° German hardness is equivalent to 1.79° French hardness.
If the filter is activated, the program step Water Hardness no
longer appears.
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
The IMPRESSA has 5 hardness degrees which can be used
and are displayed while you are adjusting the water hardness.
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Ⅲ Open the steam / hot water draw-off tap (14) (Fig.12).
5. Installation of Claris plus filter cartridges
Ⅲ
RINSING
FILTER
If the Claris plus filter cartridge is installed properly, de-
scaling of the coffee machine is no longer required. For
more information on the Claris plus filter cartridge refer to
brochure «Claris plus. Hard on limescale. Gentle on your
coffee machine.»
Ⅲ
CLOSE TAP
Ⅲ Close the steam/hot water draw-off tap (14), now the IM-
PRESSA will heat up to coffee temperature.
Ⅲ
Ⅲ
HEATING UP
READY
5.1 Installing the filter
Draw off 1/2 litre of water to rinse filter completely. In order
to ensure perfect operation, close tap (14) only after the dis-
play says
Now you have activated the filter. In Programming Mode the
water hardness selection function is no longer displayed.
CLOSE TAP
5.2 Replacing the filter
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
water tank, applying a gentle pressure (Fig. 1).
Draw off 1/2 litre of water to rinse filter completely. In order
to ensure perfect operation, close tap (14) only after the dis-
play says
Ⅲ Fold down the cartridge holder again until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and install it again.
CLOSE TAP
E
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears After drawing off approx. 50 litres, the filter cartridge will be
used up. A message requesting you to replace the filter will
appear on the display. The scale on the cartridge holder in
the water tank will tell you how much longer you can use the
CLARIS plus filters.
Ⅲ
FILTER –
Ⅲ Press the Rotary Switch (1) to start the programming.
NO –
Ⅲ
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
played:
Ⅲ
CHANGE FILTER / MACHINE READY
symbol (7).
Ⅲ Touch the
Ⅲ
YES
ߛ Ⅲ
REPLACE
OPEN TAP
Ⅲ Press the Rotary Switch (1) to activate the filter cartridge.
Ⅲ
INSERT
Ⅲ Remove the water tank from the machine and empty it.
OPEN TAP
Ⅲ Fold up the cartridge holder. Install the filter cartridge in the
water tank, applying a gentle pressure (Fig. 1).
Ⅲ Put a sufficiently large container (approx. 1 litre) under the
replaceable hot water nozzle (16).
Ⅲ Fold down the cartridge holder again until it engages audibly.
Ⅲ Fill the water tank with cold, fresh tap water and reinstall it.
Ⅲ If not installed already, insert the Claris plus filter.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Ⅲ Place a sufficiently large jug (approx 1 litre) under the replace-
able hot water nozzle (16) and open the steam/hot water tap (14)
(Fig. 12).
Ⅲ Touch the
symbol (7).
RINSING
READY
Ⅲ
Ⅲ
Ⅲ
RINSING
FILTER
6.1 Rinsing the IMPRESSA without display request
Ⅲ
CLOSE TAP
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears. Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ
Ⅲ
HEATING UP
READY
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Ⅲ Press the Rotary Switch (1) to confirm.
5.3 Changing the filter without display request
Ⅲ
RINSE
Ⅲ Press the Rotary Switch (1) until
FILTER
ߛ appears. Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ
Ⅲ
RINSING
READY
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
YES
ߛ Ⅲ Press the Rotary Switch (1) again to confirm.
INSERT/OPEN TAP
Ⅲ The program “Change filter” is now active. Now proceed as
7. Adjusting the water quantity for coffee
Ⅲ
The indicated value in ML is a reference value and may
deviate from the actual value
described in Chapter 5.2 from
TAP onwards.
REPLACE/OPEN
You can change/stop the water quantity during the draw-off
operation, too. Turn the rotary switch (1) until the required
ML value is displayed.
6. Rinsing the IMPRESSA
When the IMPRESSA is switched off and has cooled down,
a rinsing operation is started when the machine is switched
on again. When the machine is switched off, a rinsing
operation is started automatically.
You can adjust the water quantity in steps of 5 ML using the
Rotary Switch (1).
Ⅲ
READY
Ⅲ Turn the Rotary Switch (1) until the required water quantity is
displayed.
Ⅲ Touch the
symbol (3).
Ⅲ
Ⅲ
HEATING UP
Ⅲ For example,
120 ML
PRESS
MAINT.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
8. Making 1 cup of coffee
9. Making 2 cups of coffee
You can choose from 3 different coffee strengths. Touch one
You cannot choose the strength of the coffee when making
2 cups. The machine automatically makes 2 mild cups of
coffee.
of the symbols
coffee. MILD
/
/
to select the strength of your
NORMAL STRONG.
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
You can set the amount of water you want with the Rotary
Switch (1) prior to drawing off coffee
Touch the
maturely.
(8) symbol to stop drawing off coffee pre-
Touch the
maturely.
(8) symbol to stop drawing off coffee pre-
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
The amount of coffee water you used last is saved by the
IMPRESSA until the next time you make coffee.
Press the Rotary Switch (1) briefly to check how much
coffee water you used last.
Press the Rotary Switch (1) briefly to check how much
coffee water you used last.
Ⅲ
READY
Ⅲ
READY
Ⅲ Place a cup under the height-adjustable coffee spout (17).
E
Ⅲ Place two cups under the height-adjustable coffee spout (17).
Ⅲ Touch the coffee draw-off symbol of your choice twice
Ⅲ Touch the
(5).
Ⅲ
COFFEE symbol
Ⅲ
Ⅲ
2 COFFEE
120 ML
Ⅲ Select an aroma by touching one of the symbols
Ⅲ E.g.
(STRONG aroma)
STRONG
Ⅲ The illuminated ring (2) is active.
Ⅲ
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee
water appears on the display (9).
Ⅲ Touch the
Ⅲ The illuminated ring (2) is active.
160 ML
(8) symbol
Ⅲ
Ⅲ
e.g. 210 ML
COFFEE
Ⅲ
Ⅲ Your coffee is being prepared.
READY
Ⅲ Turn the Rotary Switch (1) until the required amount of coffee
water appears on the display (9).
Ⅲ
Ⅲ
Ⅲ
e.g. 120 ML
COFFEE
Ⅲ Your coffee is being prepared.
READY
Ⅲ
Download from Www.Somanuals.com. All Manuals Search And Download.
11
10. Drawing off pre-ground coffee
Ⅲ For Example:
COFFEE
Ⅲ Your product is being prepared.
READY
210 ML
Ⅲ
Never use instant coffee or quick-coffee. We recommend
that you always use powder from fresh coffee beans or, pre-
ground, vacuum-packed coffee. Never fill in more than 2
portions of powder. The pre-ground coffee tank is no storage
tank. Make sure that the pre-ground you use is not too fine.
This may cause blocking of the system. In this case the
coffee only drips out of the coffee spout.
Ⅲ
11. Drawing off hot water
The amount of hot water you used last is saved by the
IMPRESSA until the next time you make coffee.
If you have filled in too little powder, the message NOT
ENOUGH POWDER will be displayed. The IMPRESSA
stops the operation and returns to "ready for draw off" mode.
Install the hot water nozzle (see Fig. 5) to obtain perfect
water flow. Do not replace the replaceable hot water nozzle
(16) directly after drawing off water, because the nozzle is
hot after the draw-off operation.
You can stop the draw-off operation at any time by pressing
any coffee draw-off key.
At the start of the water draw-off operation there can be
splashing Avoid direct contact with the skin!
Ⅲ
READY
Ⅲ Put 1 or 2 cups under the adjustable coffee spout (17).
Ⅲ
READY
Ⅲ Open the cover of the filler funnel for pre-ground coffee (11).
Ⅲ Place a cup under the replaceable hot water nozzle (16).
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ The illuminated ring (2) is active.
Ⅲ
FILL
POWDER
Ⅲ Fill 1 or 2 level spoonfuls of pre-ground coffee in the filler
funnel for pre-ground coffee (11) (Fig. 10) and close the cover.
Ⅲ
STEAM
(8) symbol
140 ML
Ⅲ
SELECT
KEY
Ⅲ Touch the
Ⅲ For example,
WATER
Ⅲ Press the required draw-off key.
Ⅲ
Ⅲ
120 ML (water quantity last adjusted)
Ⅲ Adjust the required water quantity by turning the rotary switch
(1).
Ⅲ The illuminated ring (2) is active.
Ⅲ
COFFEE
Ⅲ For example,
WATER
200 ML
Ⅲ Turn the Rotary Switch (1) again to select the water quantity
Ⅲ
individually:
Ⅲ If the required water quantity is reached, the following message
is displayed:
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Ⅲ
CLOSE TAP
Ⅲ
READY
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ Place a cup under the 2-stage frothing jet (15) and immerse it in
the milk to be frothed or the liquid to be heated.
Ⅲ
READY
Ⅲ To draw off steam, open the steam/hot water draw-off tap (14)
(Fig. 12).
Before CLOSE TAP water may still escape the system.
Ⅲ The illuminated ring (2) is active.
Ⅲ
STEAM
12. Drawing off steam
Ⅲ You can adjust the steam draw-off time individually by turning
the rotary switch (1) until the required SEC are displayed.
To ensure perfect operation, clean the 2-stage frothing jet
(15) regularly. Screw the nozzle off as described in. Hold the
nozzle at the top and at the bottom end and screw it apart
(Fig. 16). Thoroughly rinse the 3 parts under running water.
Ⅲ For example,
35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
rotary switch (1), the machine will use the settings last adjusted
Ⅲ During the steam draw-off operation, the message STEAM is
displayed
Make sure the nozzle has engaged properly. If the nozzle is
clogged with dried milk or has not been attached properly, it
might suddenly come off during operation.
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed
Install the 2-stage frothing jet (Fig. 6). This is included in
your Welcome Pack. Do not replace the replaceable
steam/hot water nozzle (15) directly after drawing off steam,
because the nozzle is hot after the draw-off operation.
Ⅲ Close the steam / hot water draw-off tap (14).
E
Ⅲ
READY
Before CLOSE TAP, steam may still escape the system.
Steam can be used for heating liquids and frothing milk for
cappuccino. Make sure that the 2-stage frothing jet (15) is
pushed upwards when liquids are heated. To froth liquids,
push the 2-stage frothing jet downwards, turning it slightly.
13. Drawing off steam with the
Professional-Cappuccino Frother or the
Easy-Cappuccino Frother
During frothing some water will escape the system before
the actual frothing process. This does not affect the result,
e.g. when frothing milk.
The Professional-Cappuccino Frother and the Easy-Cappuc-
cino Frother are optional. Please contact your authorized
dealer.
At the start of the steam draw-off operation there can be
splashing. The frothing jet becomes hot. Avoid direct contact
with the skin!
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Ⅲ If the set amount of steam has been reached, the display indi-
cates
13.1 Attaching the Professional-Cappuccino Frother
or the Easy-Cappuccino Frother to the
IMPRESSA
Ⅲ
CLOSE TAP
Ⅲ Close the steam / hot water draw-off tap (14).
READY
Ⅲ Remove either the hot water nozzle (Fig.5) or the 2-stage froth-
ing jet (Fig. 6).
Ⅲ
Ⅲ Now attach the Professional-Cappuccino Frother or the Easy-
Cappuccino Frother (Fig.7).
13.3 Making cappuccino with the
Easy-Cappuccino Frother
Ⅲ Connect the milk tube with the Professional-Cappuccino Frother
or the Easy-Cappuccino Frother (Fig.9).
Ⅲ Fill the milk container with milk or dip the milk tube directly
into the milk (Fig. 8).
The separate milk container (optional) is ideally suited for
drawing in the milk. This is how you connect it to your
IMPRESSA (Fig.8).
Ⅲ Place a cup under the Easy-Cappuccino Frother.
Ⅲ Open the steam / hot water draw-off tap (Fig. 12) to draw off
steam.
Ⅲ
STEAM
13.2 Making cappuccino and hot milk with the
Professional-Cappuccino Frother
Ⅲ Your cappuccino is being prepared.
Ⅲ The illuminated ring (2) is active.
Ⅲ For cappuccino, turn the selector switch (1) (Fig.9) to area (2)
Ⅲ For hot milk, turn the selector switch (1) (Fig.9) to area (3)
Ⅲ You can set any steam draw-off time. Turn the Rotary Switch (1)
until the required SEC appear on the display (9).
Ⅲ Fill the milk container with milk or dip the milk tube directly
into the milk (Fig. 8)
Ⅲ
Ⅲ
e.g. 35 SEC
STEAM
Ⅲ Place a cup under the Professional-Cappuccino Frother.
Ⅲ If the set amount of steam has been reached, the display indi-
Ⅲ Open the steam / hot water draw-off tap (Fig. 12) to draw off
steam.
cates.
Ⅲ
CLOSE TAP
Ⅲ Close the steam / hot water draw-off tap (14).
READY
Ⅲ
STEAM
Ⅲ Your cappuccino / hot milk is being prepared.
Ⅲ The illuminated ring (2) is active.
Ⅲ
Ⅲ You can set any steam draw-off time. Turn the Rotary Switch (1)
until the required SEC appear on the display (9).
13.4 Cleaning the Professional-Cappuccino Frother
and the Easy-Cappuccino Frother
Ⅲ
Ⅲ
e.g. 35 SEC
STEAM
After having frothed milk, the Professional-Cappuccino
Frother and the Easy-Cappuccino Frother need to be cleaned.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Ⅲ Fill water into a container (approx. 1/2 litre) and immerse the
milk tube in it.
¼ Maintenance
¼ Aroma
¼ Temperature
¼ Time
Ⅲ Place a sufficiently large vessel under the Professional-Cappuc-
cino Frother or the Easy-Cappuccino Frother.
¼ Automatic switch-on time
¼ Automatic switch-off time
¼ Draw-offs
Ⅲ Draw steam until the water from the Professional-Cappuccino
Frother or the Easy-Cappuccino Frother runs clean.
¼ Language
The Professional-Cappuccino Frother and the Easy-Cappuc-
cino Frother are best cleaned using the JURA Auto-Cappuc-
cino cleaner. Please contact an authorized dealer. We recom-
mend cleaning these devices daily.
¼ Display
¼ Exit
To start programming, press the Rotary Switch (1) until
FILTER –/
ߛ appears 14. Switching off the IMPRESSA
Rotary switch
In order to ensure perfect operation, please don’t switch off
your IMPRESSA at the power switch (24) before all the
symbols on the display (9) have gone off except for
Turn the Rotary Switch to change the adjusted values or to
select the next programming step.
Press the Rotary Switch to check the values adjusted or to
save the values selected (Fig. 17).
(3).
Ⅲ
READY
E
Ⅲ Switch off the IMPRESSA using the ON/OFF key
RINSING
(3).
15.1 Programming the filter
Ⅲ
Refer to Chapter 5.1 «Inserting the filter».
Ⅲ An automatic rinsing operation is started.
Ⅲ
15.2 Programming the water hardness
Your IMPRESSA is in standby mode.
Refer to Chapter 4 «Adjusting the water hardness».
15. Programming
15.3 Maintenance menu
When your IMPRESSA leaves the factory it is adjusted such
that you can draw off coffee without having to change any
settings. However, you can programme various parameters
individually.
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
You can programme the following stages:
Ⅲ Turn the Rotary Switch (1) until
¼ Filter
¼ Water hardness
MAINTENANCE appears
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Ⅲ Press the Rotary Switch (1)
RINSE
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Turn the Rotary Switch (1) until the required program item ap-
pears on the display (9).
Ⅲ
READY
Ⅲ
Ⅲ
e.g. RINSE, CLEAN, FILTER, DE-SCALE or EXIT
e.g. CLEAN
15.5 Programming the temperature
Ⅲ Press the Rotary Switch (1)
Ⅲ The cleaning program starts.
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ
EMPTY TRAY
Ⅲ The illuminated ring (2) is active.
Ⅲ Continue with Chapter 17 Cleaning, from point 3
EMPTY TRAY
Ⅲ Turn the Rotary Switch (1) until Temperature is displayed.
Ⅲ
TEMPERATURE
Ⅲ Press the Rotary Switch (1).
HIGH
15.4 Programming the aroma INTENSIVE
or STANDARD
Ⅲ
When the machine leaves the factory, the aroma is set to
intensive. If requested it can also be set to Standard.
Ⅲ Turn the Rotary Switch (1) to change the temperature from
HIGH to NORMAL (or vice versa).
Ⅲ
NORMAL
Ⅲ Press the Rotary Switch (1) to save the setting.
TEMPERATURE
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ
Ⅲ Turn the Rotary Switch (1) until
Ⅲ The illuminated ring (2) is active.
EXIT appears
Ⅲ Turn the Rotary Switch (1) until Aroma is displayed.
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
AROMA
Ⅲ Press the Rotary Switch (1).
INTENSIVE
Ⅲ
READY
Ⅲ
15.6 Programming the time
Ⅲ Turn the Rotary Switch (1) until the following message is dis-
You must programme the time if you want to use the auto-
matic switch-on function.
played:
Ⅲ
STANDARD
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ
READY
Ⅲ
AROMA
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Download from Www.Somanuals.com. All Manuals Search And Download.
16
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until MACHINE ON is displayed.
Ⅲ MACHINE ON
Ⅲ Turn the Rotary Switch (1) until TIME is displayed.
Ⅲ
TIME
Ⅲ Now press the Rotary Switch (1) to start programming the time.
--:--
Ⅲ Turn the rotary Switch (1) to adjust the hours..
12:--
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-on time.
Ⅲ
--:--
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
12:--
Ⅲ
Ⅲ
Ⅲ
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
Ⅲ
12:--
Ⅲ Turn theRotary Switch (1) to select the minutes.
12:05
Ⅲ Press the Rotary Switch (1) to save the setting.
MACHINE ON
Ⅲ
12:--
Ⅲ Turn the Rotary Switch (1) to select the minutes.
2:05
Ⅲ Press the Rotary Switch (1) to save the setting.
TIME
Ⅲ
Ⅲ
Ⅲ
Ⅲ
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
EXIT appears
E
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Ⅲ
READY
If the machine is disconnected from power supply, the time
must be programmed again.
15.8 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
15.7 Programming the automatic switch-on time
You must programme the time (Chapter 15.6) if you want to
use the automatic switch-on function.
Ⅲ
READY
Ⅲ
READY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Ⅲ
OFF AFT. HR
Ⅲ Press one of the draw-off keys
of individual cups made.
/
/
to check the number
(5).
Ⅲ Now press the Rotary Switch (1) to start programming the
switch-off time. Switch-off time OFF AFT. HR
Ⅲ E.g press draw-off key 1 cup of coffee
20
Ⅲ
5.0 HR
Ⅲ Turn the Rotary Switch (1) to adjust the hours.
1.0 HR
Ⅲ Press the Rotary Switch (1) to save the setting.
OFF AFT. HR
Ⅲ
You can check the number of pre-ground cups of coffee by
opening the filler funnel for pre-ground coffee (11).
Ⅲ
Ⅲ Touch one of the symbols
/
/
to check how often you
Ⅲ
made 2 cups of coffee.
Ⅲ Turn the Rotary Switch (1) until
Ⅲ To quit press the Rotary Switch (1).
CUPS MADE
EXIT appears
Ⅲ
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Turn the Rotary Switch (1) until
Ⅲ
READY
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
READY
15.9 Cup counter
Ⅲ
This function is available with the following types of coffee:
a) 1 LARGE CUP
b)1 COFFEE
15.10 Programming the language
Ⅲ
READY
c) 1 ESPRESSO
d)1 powder coffee
e) 2 COFFEE
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until LANGUAGE is displayed.
Ⅲ
READY
Ⅲ
LANGUAGE
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Now press the Rotary Switch (1) to start programming the item
LANGUAGE.
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until the required language is dis-
played.
Ⅲ Turn the Rotary Switch (1) until
CUPS MADE appears
Ⅲ For example
ENGLISH
Ⅲ Press the Rotary Switch (1)
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ
100
Download from Www.Somanuals.com. All Manuals Search And Download.
18
15.12 Programming the display for ML/OZ
Ⅲ
LANGUAGE
Ⅲ Turn the Rotary Switch (1) until
Ⅲ
READY
EXIT appears
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READY
Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until
15.11 Programming Display 24H/AM/PM
DISPLAY appears
Ⅲ Press the Rotary Switch (1)
Ⅲ
READY
Ⅲ
ML/OZ appears
Ⅲ Press the Rotary Switch (1)
Ⅲ e.g. ML
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ The illuminated ring (2) is active.
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Select a setting of your choice.
DISPLAY appears
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ Press the Rotary Switch (1)
Ⅲ
DISPLAY
Ⅲ
ML/OZ appears
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Turn the Rotary Switch (1) until
EXIT appears
E
24H/AM PM appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Press the Rotary Switch (1)
Ⅲ
READY
Ⅲ
e.g. 24H
Ⅲ Select a setting of your choice.
15.13 Exit programming mode
Ⅲ Press the Rotary Switch (1) to save the setting.
Ⅲ
READY
Ⅲ
DISPLAY
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears Ⅲ Turn the Rotary Switch (1) until
EXIT appears
Ⅲ The illuminated ring (2) is active.
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ Turn the Rotary Switch (1) until
Ⅲ
READY
EXIT appears
Ⅲ Press the Rotary Switch (1) to leave the programming mode.
Ⅲ
READYM
Download from Www.Somanuals.com. All Manuals Search And Download.
19
16. Maintenance
16.3 Drip tray missing
Ⅲ
NO
TRAY
16.1 Filling in water
Ⅲ
FILL
Ⅲ If this information is displayed, the drip tray (20) is not installed
WATER
properly or was not installed at all.
Ⅲ Insert the drip tray (20).
If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 2.3.
Ⅲ
READY
Ⅲ
READY
16.4 Fill coffee beans
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
Ⅲ
FILL
BEANS
Ⅲ Refill beans as described in Chapter 2.4.
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
16.2 Emptying the coffee grounds container
Ⅲ
EMPTY
GROUNDS
We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before cleaning the tank,
switch off the IMPRESSA.
If this message appears on the display, you can no longer
draw off coffee. You must empty the coffee grounds con-
tainer (18) first (Fig. 13).
16.5 Replacing the filter
Ⅲ Carefully take out the drip tray (20), it is filled with water.
After drawing off 50 litres, the filter cartridge will be used
up. A message requesting you to replace the filter will appear
on the display.
Ⅲ
NO
TRAY
Ⅲ Insert the empty and clean trip tray (20) again.
Refer to Chapter 5.2 «Replacing the filter».
Ⅲ
READY
The red water level indicator appears when the drip tray (20)
is full.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Remove the Claris plus filter cartridge, if installed, before
de-scaling the water tank.
16.6 Cleaning the IMPRESSA
After 200 draw-off operations or after 80 rinsing operations, the
IMPRESSA must be cleaned. A message appears on the display,
telling you to start the cleaning programme. You can still draw off
coffee or hot water/steam. However, we recommend that you
should clean the machine (Chapter 17) within the next few days.
16.9 Emptying the system
Precondition: IMPRESSA switched off
This operation is required to protect the IMPRESSA against
frost damage during transports.
Ⅲ
CLEAN MACHINE / MACHINE READY
Ⅲ Place a container under the replaceable hot water nozzle (16).
16.7 IMPRESSA calcified
Ⅲ
OPEN TAP
During operation, the machine will calcify. The degree of scaling
depends on the hardness of the water in your region. The machine
will inform you when de-scaling is required. You can still draw off
coffee or hot water/steam. However, we recommend that you
should de-scale the machine (Chapter 18) within the next few days.
Ⅲ Press the Rotary Switch (1)
Ⅲ
Ⅲ
EMPTYING
CLOSE TAP
Ⅲ The IMPRESSA is switched off.
Ⅲ
MACHINE CALCIFIED / MACHINE READY
17. Cleaning
E
16.8 General cleaning instructions
Your IMPRESSA features an integrated cleaning program. The
cleaning operation will take some 15 min.
Ⅲ Never use scratching objects, pan cleaners, cleaning sponges or
caustic chemicals to clean the machine.
JURA cleaning tablets which are specially designed for the
cleaning program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate cleaning agents.
Ⅲ Wipe off the case on the inside and outside using a soft, moist
cloth.
Ⅲ Clean the replaceable hot water nozzle after each use.
Ⅲ After heating milk, draw off some hot water, to clean the inside
of the 2-stage frothing jet, too.
Once started, the de-scaling operation must not be inter-
rupted!
Ⅲ Disassemble the 2-stage frothing jet for proper cleaning (Fig. 6).
Ⅲ The water tank should be rinsed daily and refilled with fresh
water.
After each cleaning operation the filler funnel for pre-ground
coffee should be cleaned (11).
If the water tank shows signs of scaling, remove the scaling
using a commercial de-scaling agent. Take out the water
tank (Fig. 4).
Download from Www.Somanuals.com. All Manuals Search And Download.
21
17.1 Cleaning without display request
Ⅲ
READY
CLEAN
Ⅲ Press the Rotary Switch (1) until
FILTER –/
ߛ appears. Ⅲ Touch the
symbol (7).
Ⅲ
EMPTY
TRAY
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Ⅲ Empty the tray (20).
Ⅲ Press the Rotary Switch (1) to confirm.
Ⅲ
NO
TRAY
Ⅲ
RINSE
Ⅲ Turn the Rotary Switch (1) until
Ⅲ Insert the tray (20) again.
Ⅲ Remove the drip grate (19).
CLEAN appears.
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ Put a container (1 l, Fig. 11) under the adjustable coffee spout
(17).
Ⅲ
EMPTY TRAY
Ⅲ The program “Clean” is now active. Now proceed as described
Ⅲ
PRESS
in Chapter 17 from
EMPTY TRAY onwards.
MAINT.
Ⅲ Touch the
symbol (7).
18. De-scaling
Ⅲ
Ⅲ
CLEANING
Your IMPRESSA features an integrated de-scaling program. The
cleaning operation will take some 40 min.
FILL
TABLET
Ⅲ Fill in the tablet (see Fig. 14)
JURA de-scaling tablets which are specially designed for the
de-scaling program of your IMPRESSA are available at your
authorized dealer. Please note that machine defects or
residues in the water cannot be excluded if you use inappro-
priate de-scaling agents.
Ⅲ
PRESS
MAINT.
Ⅲ Touch the
symbol (7).
Ⅲ
Ⅲ
CLEANING
EMPTY
TRAY
If the IMPRESSA needs de-scaling, the corresponding mes-
sage is displayed.
You can still draw off coffee or hot water/steam and start the
de-scaling program later.
Before starting the de-scaling program, the machine must be
switched off. Once started, the de-scaling operation must not
be interrupted.
Ⅲ
NO
TRAY
Ⅲ
READY
Ⅲ Wipe coffee powder tank with a dry cloth after the cleaning
program has finished.
Ⅲ The cleaning operation was completed successfully.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
When using the de-scaling agent, immediately remove any
splashes or drips from sensitive surfaces, i.e. natural stone
and wooden surfaces, or take appropriate precautions.
Ⅲ
EMPTY
TRAY
Ⅲ Empty the tray (20).
Ⅲ
NO
TRAY
In any case wait until the de-scaling agent is used up and the
tank is empty. Never refill de-scaling agent.
Ⅲ Insert the tray (20) again.
Ⅲ
MACHINE CALCIFIED / MACHINE READY
Ⅲ
FILL
Ⅲ Remove hot water nozzle/2-stage frothing jet.
WATER
Ⅲ Touch the
symbol (7).
EMPTY
TRAY
Ⅲ Empty the tray (20).
Rinse the water tank thoroughly and fill it with cold, fresh
tap water. Install it again.
Ⅲ
Ⅲ
OPEN
TAP
Ⅲ
NO
TRAY
Ⅲ Open the steam / hot water draw-off tap (14) (Fig. 12).
Ⅲ Insert the tray (20) again.
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
Ⅲ
AGENT
E
IN TANK
Ⅲ After you have closed the steam / hot water draw off tap (14),
the following message is displayed
Completely dissolve the content of one blister (3 tablets) in a jug
containing 0.5 litres of water, and fill the mixture in the water tank.
Reinstall the water tank.
Ⅲ
Ⅲ
DE-SCALING
EMPTY
TRAY
Ⅲ
OPEN TAP
AGENT
IN TANK
Ⅲ Empty the tray (20).
Ⅲ
NO
TRAY
Ⅲ Put a sufficiently large container under the replaceable hot water
Ⅲ Insert the tray (20) again.
nozzle (16).
Ⅲ
PRESS
Ⅲ Open the steam / hot water draw-off valve (14) (Fig. 12).
MAINT.
Ⅲ
Ⅲ
DE-SCALING
CLOSE TAP
Ⅲ Touch the
symbol (7).
Ⅲ
Ⅲ
RINSING
READY
Ⅲ Close the steam / hot water draw-off tap (14).
DE-SCALING
Ⅲ
Ⅲ The de-scaling operation was completed successfully.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
18.1 Decalcifying without display request
20. Tips for perfect coffee
Decalcifying without display request is only possible if the
Claris plus filter is NOT programmed.
Height-adjustable coffee spout (17)
You can adjust the height of the coffee spout to the size of your
cups (Fig. 3)
Ⅲ Press the Rotary Switch (1) until
FILTER – appears.
Grinding degree
Refer to Chapter 2.5 «Adjusting the grinding gear».
Ⅲ Turn the Rotary Switch (1) until
MAINTENANCE appears.
Preheating cups
Ⅲ Press the Rotary Switch (1) to confirm.
You can preheat the cups using hot water or steam. The smaller the
coffee you want to draw off, the more important preheating is.
Ⅲ
RINSE
Ⅲ Turn the Rotary Switch (1) until
Sugar and cream
DECALC. ON appears.
Stirring coffee/tea will result in heat being released. Adding
refrigerated cream or milk will reduce the temperature of the coffee
significantly.
Ⅲ Press the Rotary Switch (1) again to confirm.
Ⅲ
EMPTY TRAY
Ⅲ The program “De-scale” is now active. Now proceed as de-
scribed in Chapter 18 from
EMPTY TRAY onwards.
19. Disposal
Please return the IMPRESSA machine to your local dealer, the
service shop or to JURA for proper disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
21. Messages
Cause
Remedy
FILL WATER
Water tank is empty.
Float defective
Refill water
Rinse or de-scale water tank
Refill beans
FILL BEANS
Bean tank is empty.
Although you have refilled beans, the
message still appears.
Draw off a cup of coffee. The message will
disappear only after you have drawn off a cup
of coffee
EMPTY GROUNDS
NO TRAY
Coffee grounds container full
Empty coffee grounds container
Wait 10 sec. before reinstalling the tray
Install tray properly
Tray reinstalled too early after emptying
Drip tray not installed properly or missing
Cleaning required
E
CLEAN MACHINE /
MACHINE READY
Start cleaning programme (Chapter 17)
MACHINE CALCIFIED /
MACHINE READY
De-scaling required
Filter used up
Start de-scaling programme (Chapter 18)
Replace filter (Chapter 5.2)
CHANGE FILTER /
MACHINE READY
ERROR
General fault
- switch off
- disconnect from mains supply
- Connect IMPRESSA to power supply
- Switch on IMPRESSA
- Have IMPRESSA checked by JURA
- Service
Download from Www.Somanuals.com. All Manuals Search And Download.
25
22. Problems
Problem
Cause
Remedy
Very loud noise coming from the
grinding gear
Foreign body in grinding gear
Drawing off pre-ground coffee still possible
Have IMPRESSA checked by JURA Service
Too little froth when
frothing milk
2-stage frothing jet blocked
2-stage frothing jet in wrong position
Grinding degree too fine
clean 2-stage frothing jet
Draw off steam (Chapter 12)
Coarser grinding gear adjustment
Use a coarser pre-ground coffee
Coffee only drips
from the coffee spout
Pre-ground coffee too fine
High-frequency, electromagnetic interference may influence the display. Drawing off coffee is possible at any time.
If the messages or problems still persist, please contact your local authorized dealer or JURA Elektroapparate AG.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
23. Legal information
24. Technical Data
Voltage:
These operating instructions contain all the information required
for using, operating and maintaining the machine properly.
230V AC
1450 W
10 A
Power:
Knowledge of and compliance with the specifications contained in
these operating instructions is required for using the machine safely
as well as for operational safety and safety during maintenance.
These operating instructions cannot cover any conceivable appli-
cation. The machine was designed for private household use.
Additionally we point out that the content of these operating
instructions does not form part of any previous or existing agree-
ment, consent or al legal relationship nor does it constitute a
change of such an agreement, consent or legal relationship. Any
obligations to be fulfilled by JURA Elektroapparate AG are stipu-
lated in the corresponding purchase contract, which also contains
the full and solely applicable warranty stipulations. These con-
tractual warranty stipulations are neither extended nor limited by
the specifications contained in these operating instructions.
Fuse:
Safety check:
Energy consumption Standby:
approx. 3.5 Wh
Energy consumption
«Ready for draw-off» mode:
approx. 11.5 Wh
static, max. 15 bar
1.9 litres
Pump pressure:
Water tank:
Bean tank capacity:
Coffee grounds container capacity :
Length of cable:
Weight:
200gr.
max. 16 portions
approx. 1.1 m
9.1 kg
The operating instructions contain information, protected by Copy-
right. Photocopying or translations into other languages shall not be
permissible without JURA Elektroapparate AG’s written approval.
E
Size (WxHxD):
28x34.5x44.5 cm
The machine complies with the following EU directives:
73/23/EWG dated 19/02/1973 "Low Voltage Directive" including
Modification Directive 93/336/EWG
89/336/EWG dated 03/05/1989 "EMC Directive" including
Modification Directive 92/31/EWG
Download from Www.Somanuals.com. All Manuals Search And Download.
27
|