JLBILIC02
Built-in fridge
Instruction manual
John Lewis Partnership
171Victoria Street
London SW1E 5NN
07/06
2223 395-71
Download from Www.Somanuals.com. All Manuals Search And Download.
Environmental Information
Repairs - After Sales Service
•
•
After installation, please dispose of the packaging with due
regard to safety and the environment.
Under no circumstances should you attempt to
repair the machine yourself. Repairs carried out by
Spare parts
When disposing of your appliance use an authorised
disposal site. Remove the plug and ensure that all locks and
catches are removed to prevent young children being
trapped inside.
This product should be serviced by an authorised
service engineer, and only genuine spare parts should
be used.
inexperienced persons may cause injury or serious
malfunctioning. Refer to your local Service Force
Centre and always insist on genuine spare parts.
Under no circumstances should you attempt to
repair the appliance yourself.
If your appliance is not performing satisfactorily;
consult the fault finding guide within this instruction
book (Something not working). In the event of a
fault occurring which you cannot resolve yourself
from advice given within this instruction manual
your first step is to contact our extended warranty
administrators on 0870 0107887 who will give you
details for your local Service Force Repair Agent.
•
The symbol
on the product or on its packaging
indicates that this product may not be treated as
Repairs carried out by inexperienced persons may
cause injury or serious malfunctioning. Contact our
extended warranty administrators on 0870
0107887 who will give you details for your local
Service Force Repair Agent.
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical and
electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
city office, your household waste disposal service or the
shop where you purchased the product.
Always insist on genuine spare parts.
When contacting the repair agent, please quote the
model (Mod.) and serial number (S.N.), both of
which are shown on the rating plate located on the
side of the oven door (see picture).
So that you always have these numbers at hand, we
recommend you to make a note of them here:
Mod. : . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . .
S .N. : . . . . . . . . . . . . . . . . . . .
Your applaince is covered by a 3 year parts and
labour guarantee (see separate details given at point
of sale). Please retain your purchase receipt safely
for the service engineer to verify the purchase
details.
Manufacturer
Model
JLBILICO2
Energy Efficiency
class
A
Energy Consumption
kWh/year
176
Fresh food volume l
Fresh food volume l
330
18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Something not working
Contents
If the appliance is not working correctly, please carry out the following checks, before contacting your local
Service Force repair agent.
For the User
For the Installer
Installation
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use
or installation, a charge will be made even if the appliance is under guarantee.
6
6
Important Safety Information
Description of the appliance
2
5
Technical Specification
SOLUTION
SYMPTOM
Electrical Connection
Shelf holders
6
7
Control panel
12
12
12
12
13
13
13
13
14
14
14
15
Ñ Check there is power at the socket.
4 No power to the appliance
When the Fridge is first installed
Activation of functions
Switching off
Ñ Check there is not a power cut by checking the
household lights.
Positioning
7
Ñ Check the fuse has not blown.
Building In
8
4 The temperature in the fridge is too high
Ñ Check the thermostat control knob mounted
in the top of the appliance is turned to the
correct setting relative to ambient conditions.
Using the fridge
Temperature control
Fresh food refrigeration
Normal operating sounds
Movable shelves
Ñ Check the ambient temperature is within the
appliance’s operating limits, please refer to the
installation section in this instruction book.
Relocate the appliance if necessary.
Guide to use the Instruction
Manual
The following symbols will be found in the text to
guide you throughout the instructions:
Ñ Adjust the thermostat control knob to give
correct temperature control. See “Setting the
temperature”.
4 The compressor runs continously
Positioning the door shelves
Bottle holder
Air recycling
Ñ Check that the door is closed.
Safety instructions
Hints and tips
Ñ Large quantities of food have recently been
placed in the cabinet and/or door is frequently
opened.
Hints andTips
15
Maintenance and Cleaning
Internal cleaning
16
16
16
16
16
16
Ñ Check that air ventilation is not obstructed.
Ñ Ensure the doors are not left open.
4 Excessive frost and ice has built up
Environmental information
When the appliance is not in use
Changing the light bulb
External cleaning
Ñ Check that nothing is preventing the doors
from closing.
This appliance complies with the following
E.E.C. Directives:
* 73/23 - 90/683 (LowVoltage Directive);
* 93/68 ("General Product Safety Directive");
4 Noise
Ñ Is the door gasket intact and clean.
Defrosting
Something NotWorking
17
18
* 87/308 (Radio Interference
Suppression);
Repairs - After Sales Service
* 89/336 (Electromagnetic Compatibility
Directive)
and subsequent modifications.
4
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
Description of the Appliance
Before any maintenance or cleaning work is carried
out, DISCONNECT the appliance from the
ELECTRICITY supply.
Mode
On/Off
1
2
5
5
3
4
1 Dairy compartments
2 Can storage shelves
3 Movable storage shelf
4 Bottle storage shelf
5 Control panel
6
Internal cleaning
Clean the inside and accessories with warm water
and bicarbonate of soda (5ml to 0.5 litre of water).
Rinse and dry thoroughly.
1
7
2
NEVER USE DETERGENTS,
ABRASIVE POWDERS, HIGHLY
PERFUMED CLEANING PRODUCTS
ORWAX POLISHES,TO CLEANTHE
INTERIOR ASTHESEWILL DAMAGE
THE SURFACE AND LEAVE A
STRONG ODOUR.
6 Interior light
7 DAC
9
8 Storage shelves
9 Bottle holder
3
press on the rear hook and at the same time slide the
cover in the direction indicated by the arrow.
Unscrew the bulb and replace it with one of the
same power (the maximum power is shown on the
light diffuser) available from your nearest Service
Force Centre.
8
10 Water discharge hole
11 Salad crisper
When the appliance is not in
use
Replace the light cover by sliding it into its original
position.
10
When the appliance is not in use for long periods,
disconnect from the electricity supply, empty all
foods and clean the appliance, leaving the doors ajar
to prevent unpleasant smells.
4
Defrosting
Refrigerator
11
External cleaning
The refrigerator automatically defrosts every time the
compressor stops.The water is discharged, via the pipe, into
a tray located at the back of the appliance above the
compressor, where it evaporates.
Once or twice a year dust the condenser (black
grill) and the compressor at the back of the
appliance, with a brush or vacuum cleaner, see
figure, as an accumulation of dust will affect the
performance of the appliance and cause excessive
electricity consumption.
D037
Important
PR259
To avoid defrost water overflowing into the fridge,
periodically clean the water discharge hole in the centre of
theV shaped drip collector at the back of the refrigerator
compartment behind the fruit and vegetable drawer. Use the
defrost cleaner provided which you will find already
inserted into the discharge hole.
Changing the light bulb
Should the interior light fail to work, first switch off
the appliance and disconnect from the electricity
supply, then replace the bulb as follows;
Remember to wash the defrost cleaner in hot soapy water
at regular intervals. Dry throughly before replacing.
16
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Fig. 1
Air recycling
SWITCH
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
The refrigerator compartment is equipped with a
special D.A.C.(Dynamic Air Cooling) fan which can
be turned on with the switch (fig. 1).The green light,
when on, means that the fan is working.
Care must be taken to ensure that the
appliance does not stand on the electrical
supply cable.
It is suggested that the fan (D.A.C.) be used when
the ambient temperature exceeds 25°C .
Technical Data
Dimensions of recess
This device allows for rapid cooling of foods and a
more uniform temperature in the compartment.
Heating elements rating
Supply voltage (50 Hz)
Connected load,
Fridge light
220-240V
Height
Width
Depth
1780 mm
560 mm
550 mm
120W
25W
Dimensions of the appliance cavity
Height
Width
Depth
1772 mm
540 mm
547 mm
Hints andTips
• To obtain the best results from your appliance,
neither hot foods nor liquids which may
evaporate, should be placed in the larder
compartment.
Fridge Gross capacity
Fridge Net capacity
332 litres
330 litres
GREEN & YELLOW
13 AMP. FUSE
Food Storage
Energy Saving Advice
• Do not install the cabinet close to sources of
heat, i.e. boiler or radiator.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
• Locate the appliance in a cool well ventilated
room and make sure that the air openings of the
cabinet are not obstructed.
• Keep the time between buying chilled food and
placing it in your fridge as short as possible.
BROWN
• Always leave warm food to cool down to room
temperature before placing in the fridge.
WARNING:THIS APPLIANCE MUST BE
EARTHED.
BLUE
• Do not push food together too much, try to
allow air to circulate around each item.
CORD CLAMP
D207
• Try to avoid keeping the door open for long
periods, or opening the door too frequently as
warm air will enter the cabinet, and cause the
compressor to switch on unnecessarily often.
The manufacturer declines any liability should this
safety measure not be observed.
• Do not store food uncovered.
1. Connect the Green andYellow (earth) wire to the
terminal in the plug which is marked with the letter
• Remove suspect food from your refrigerator and
clean, refer to ‘Maintenance and Cleaning’.
If the plug that is fitted to your appliance is not suitable
for your socket outlet, it must be cut off and the
appropriate plug fitted.
«E» or the earth symbol
yellow.
or coloured green and
• Ensure there are no obstructions preventing the
door from closing properly.
2. Connect the blue (neutral) wire to the terminal in the
plug which is marked with the letter «N» or coloured
black.
Remove the fuse from the cut off plug.
• It is advisable to peridocally clean the
refrigeration system at the back of the appliance
with a duster or vacuum cleaner.
The cut off plug should then be disposed of to prevent
the hazard of shocks in case it should be plugged into a
13amp socket in another part of your home.
3. Connect the brown (live) wire to the terminal in the
plug which is marked with the letter «L» or coloured
red.
4. Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.The plug moulded onto
the lead incorporates a fuse. For replacement, use a
13amp BSI362 fuse. Only ASTA or BSI approved fuses
should be used.
Important
The wires in the mains lead are coloured in accordance
with the following code:
Green andYellow
Blue
- Earth
- Neutral
- Live
The plug must not be used if the fuse cover/carrier is
lost.The cover/carrier is indicated by the coloured insert
at the base of the plug.
Brown
If you fit your own plug, the colours of the wires in the
mains lead of your appliance may not correspond with
the markings identifying the terminals in your plug,
proceed as follows:
A replacement cover/carrier must be obtained from your
local Service Force Centre.
6
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Shelf holders
A
Your appliance is equipped with shelf retainers that
make it possible to secure the shelves during
transportation.
Movable shelves
The walls of the refrigerator have runners so that
the shelves can be positioned as desired .
B
To remove them proceed as follows:
For better use of space, the front half-shelves can lie
over the rear ones.
Move the shelf holders in the direction of the
arrow, raise the shelf from the rear and push it
forward until it is freed and remove the retainers.
C
D338
Warning
Positioning the door shelves
Important
IFYOU ARE DISCARDING AN OLD APPLIANCE
THAT HAS A LOCK OR CATCH ONTHE DOOR,
YOU MUST ENSURETHAT IT IS MADE
UNUSABLETO PREVENTYOUNG CHILDREN
BEINGTRAPPED INSIDE.
To permit storage of food packages of various sizes,
the door shelves can be adjusted in height.To make
these adjustments proceed as follows:
Gradually pull the shelf in the direction of the
arrows until it comes off, then reposition as
required.
It must be possible to disconnect the appliance from the
mains power supply; the plug must therefore be easily
accessible after installation.
Depending upon the position which you choose for
your appliance, you may wish to reverse the way in
which the door opens.To do this, refer to
instructions on “Door reversal directions”.
Positioning
The appliance should be left for 2 hours after
installation before it is turned on, in order to allow
the refrigerant to settle.
This appliance should only be installed at a location
where the ambient temperature corresponds to the
climate classification indicated on the rating plate,
which is located at the left on the inside of the
appliance.
Bottle holder
Place the bottles (with the opening facing front) in
the pre-positioned shelf.
If the shelf is positioned horizontally, place only
closed bottles.
The following table shows which ambient
temperature is correct for each climate
classification:
This bottle holder shelf can be tilted in order to
store previously opened bottles.
SN +10°C to + 32°C
To obtain this result, pull the shelf up so it can
rotate upwards and be placed on the next higher
level.
N
+16°C to + 32°C
ST +18°C to + 38°C
+18°C to + 43°C
T
It should be located in a dry atmosphere, out of
direct sunlight and away from extreme temperature
e.g. not next to a boiler or radiator, or in a very cold
room e.g. an outhouse . If these temperatures are
exceeded i.e. colder or warmer, then the appliance
may not operate correctly.
For building-in and door reversibility, if necessary ,
refer to the relevant instructions in the following
pages.
7
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Building In
Using the fridge
Before carrying out any work, remove the plug from the
power socket.
Before use
Please ensure that when the appliance is installed it is
easily accessible for the engineer in the event of a
breakdown.
Remove all securing tapes.Wash inside the appliance
with lukewarm water and bicarbonate of soda (5 ml
to 0.5 litre of water).
Do not use soap or detergent as the smell
may linger. Dry thoroughly.
The appliance is supplied with the
right door opening.
Temperature control
The temperature within the refrigerator is
controlled by the thermostat situated in the top of
the refrigerator.
Fresh food refrigeration
To change the opening direction of the
door proceed as in the following
instructions before installing it.
To obtain the best performance, do not store warm
food or evaporating liquids in the refrigerator; do
cover or wrap the food, particularly if it has a strong
flavour.
To operate the refrigerator proceed as follows:
Position 1 = minimum coldness
1. Unscrew the upper pin and remove the spacer
2. Remove the door.
Do not cover the shelves with any protective
material, such as paper, cardboard or plastic, which
may obstruct the air circulation through them.
Position 5 = maximum coldness
3. Unscrew the lower pin and remove the spacer;
replace them on the opposite side.
Turn the thermostat control knob beyond the «G»
position.
To help you use your refrigerator correctly, here are
some more useful hints:
4. Reinsert the door and screw the pin and the
spacer back in place on the opposite side.
When you first start the refrigerator, we suggest
that you turn the thermostat control to a medium
setting.
Raw meat (beef, pork, lamb & wild fowl): wrap in
polythene bags and place on top of the salad
crispers.
For easier turning of this control, use a small coin.
Meat can only be stored safely in this way for
one or two days at the most.
However, if the appliance is working in unfavourable
room conditions such as
Fruit & vegetables: these should be thoroughly
min.
50 mm
- poor ventilation,
Recess dimensions
cleaned and placed in the bottom salad crispers.
200 cm2
Height
Depth
Width
(1)
(2)
(3)
1780 mm
550 mm
560 mm
- high temperature,
- frequent door openings,
Butter & cheese: these should be placed in special
airtight containers or wrapped in aluminium foil or
polythene bags to exclude as much air as possible.
it may be necessary to select a more suitable
setting.
The appliance’s door has been locked in
position for transport by means of pins on
both sides.According to the door opening
direction, remove relevant pins at the top and
at the bottom.
Milk bottles: these should have a cap and should
be stored in the bottle rack on the door.
min.
200 cm
2
Normal Operating Sounds
• You may hear faint gurgling or bubbling sounds
when the refrigerant is pumped through the coils
or tubing at the rear, to the cooling
To ensure adequate ventilation, allow the clearances
shown in figure.
D567
plate/evaporator or to the fixed freezer shelves.
• When the compressor is on, the refrigerant is
being pumped round, and you will hear a whirring
sound or pulsating noise from the compressor.
It is necessary that the cabinet has a ventilation
recess with the following dimensions:
B
T
depth
width
50 mm
540 mm
• A thermostat controls the compressor, and you
will hear a faint ’click’ when the thermostat cuts
in and out.
H
PR01
8
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Drill the unit using a Ø 2.5 mm drill (10 mm max.
penetration);
Ø 2,5
The Control Panel
Fix the square fitting to the appliance.
Mode
On/Off
1
2
5
3
4
13mm
D
B
A
C
Push button
C -
D -
Function button
A -
Appliance button ON/OFF
D740
Thermostat control knob
B -
Temperature and function indicator
DISPLAY
Fit the appliance in the niche by making sure that it
stands against the interior surface of the unit on the
side where the door hinges of the appliances are
fitted. Insert the appliance until the upper strip butts
up against the unit (1) and make sure that the lower
hinge is in line with the surface of the unit (2).
2
4
1
3
2
3. Temperature indicator
1. Door open alarm indicator
4. Illuminated when the shopping function is on
2. Positive or negativeTemperature indicator
D022
Activation of functions
Each time button C is pressed, the following functions
are activated in a clockwise direction:
When the Fridge is first
installed
Fasten the appliance with 4 screws provided in the
kit included with the appliance.
(I = short) (P = long)
Symbol 4 :shopping function.
No Symbol:Normal operation
I
Warning
Allow the appliance to stand for 2 hours after
installation.
Switching off
The appliance is shut off by holding in button (A) for
more than 1 second.After this, a countdown of the
temperature from -3 -2 -1 will be shown.
P
Insert the plug into the wall socket.
After plugging the plug into the power outlet, if the
display is not illuminated, press key (A), appliance on.
When the appliance is shut off, display (B) also goes
off.
As soon as the appliance is turned on, the following
signals will appear on the control panel:
Apply the sealing strip pushing it between the
refrigerator and the adjacent cabinet.
• symbol (2) will be positive, indicating that the
temperature is positive.
Place the refrigerator adjustment knob (D) in a middle
position, and the appliance will be set up to provide
the following temperature:
roughly +5°C in the refrigerator.
D724
12
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Apply covers (C-D) on joint cover lugs and into
hinge holes.
Snap vent grille (B) and hinge cover (E) into
position.
Should the lining up of the furniture door be
necessary, use the clearance of slots.
C
At the end of operations, it is necessary to check if
the door of the furniture closes properly.
D
E
Hb
B
PR168
Fix cover (Hd) on guide (Hb) until it clips into place.
Separate parts Ha, Hb, Hc, Hd as shown in the
figure.
Hb
Ha
Hc
Hb
Hd
Hd
PR266
PR167/1
After completion of the door reversing
operation, check that the door gasket
adheres to the cabinet. If the ambient
temperature is cold (i.e. inWinter), the
gasket may not fit perfectly to the cabinet. In
that case, wait for the natural fitting of the
gasket or accelerate this process by heating
up the part involved with a normal hairdryer
on a low setting.
Place guide (Ha) on the inside part of the furniture
door, up and down as shown in the figure and mark
the position of external holes.After having drilled
holes, fix the guide with the screws supplied.
ca. 50 mm
90°
ca. 50 mm
Fix cover (Hc) on guide (Ha) until it clips into place
Ha
Hc
8mm
Open the appliance door and the furniture door at
90°. Insert the small square (Hb) into guide (Ha).
Put together the appliance door and the furniture
door and mark the holes as indicated in the figure.
Remove the squares and drill holes with ø 2 mm at
8 mm from the outer edge of the door. Place the
small square on the guide again and fix it with the
screws supplied.
Ha
Hb
PR167
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|