JLDWW 905
compact dishwasher
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
G
Ensure that the door of the dishwasher is always closed when
it is not being loaded or unloaded. In this way you will avoid
anybody tripping over the open door and hurting themselves.
Environm ental inform ation
G
After unpacking please dispose of the packaging with due
regard to safety and the environment.
G
G
Do not sit or stand on the open door.
G
G
Materials marked with the symbol
are recyclable.
Isolate the appliance from the power supply and turn off the
water supply after use.
Check with your local Council or Environmental Health Office
to see if there are facilities in your area for recycling this
appliance.
Maintenance and cleaning
G
G
When the appliance is to be scrapped, cut off the power
supply cable and make the door closing device unusable to
prevent young children from being trapped inside.
All filters must be checked and cleaned on a regular basis -
dirty filters will degrade the wash performance of the
dishwasher. For information on maintaining and cleaning your
dishwasher see page 23 of this Instruction manual.
W arning !
A cut off plug inserted into a 13 amp socket is a serious
safety (shock) hazard. Please ensure the cut off plug is
disposed of safely.
Service
G
This product should be serviced by an authorised Service
Force agent, and only genuine spare parts should be used. See
page 25 for details.
The symbol
on the product or on its packaging indicates
that this product may not be treated as household waste. Instead
it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling
of this product.
Ecological hints
To save water and energy and help protect the environment, we
recommend that you follow these hints:
For more detailed information about recycling of this product,
please contact your local city office, your household waste
disposal service or the shop where you purchased the
product.
G
G
G
Ensure that the water softener is correctly adjusted.
Do not pre-wash under running water.
Select the wash programme to suit the nature and degree of
the soiling on the dishes.
G
G
G
Do not use more detergent, dishwasher salt and rinse aid
than is recommended in these operating instructions and by
the manufacturer of the respective product.
Delay start: When possible programme your dishwahser to
run over night, to enable, for example, the use of economical
overnight electricity tariffs.
Autom atic W ash Program m e: This machine is fitted with
a turbidity sensor which intelligently adjusts the temperature
and rinsing cycles during the wash programme, depending on
the degree of soiling on the dishes.This helps to reduce
energy and water consumption on lightly soiled loads.
G
Half load: this allows to wash small loads reducing energy
and water consumptions.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
For the user
For the installer
Installation
6
6
Im portant Safety Inform ation
Installation
Child safety
2
2
2
2
3
3
3
3
Technical specifications
Unpacking
7
7
7
8
8
Use
Water supply connections
Water outlet hose connection
Fitting under a counter
Levelling
Maintenance and cleaning
Service
Ecological hints
Environmental information
Electrical connection
Permanent connection
9
9
Contents
4
5
Description of the Appliance
The Control Panel
10
W hen the Dishwasher is first installed
The water softener
Dishwasher salt and replenishment
Rinse aid and replenishment
12
12
13
14
Guide to use the instruction m anual
The following symbols will be found in the text to guide you
throughout the instructions
Safety instructions
Hints and tips
Using the dishwasher
Loading cutlery and dishes
The lower basket
The cutlery basket
The upper basket
15
15
16
16
17
17
18
Environmental information
Adjusting the height of the upper basket
Use of detergent
Different kinds of detergent
W ashing Program m es
19
20
21
This appliance com plies with the following
E.E.C. Directives:
Starting a W ashing Program m e
* 73/23 or 19.2.73 (Low Voltage Directive) and
subsequent m odifications;
Maintenance and Cleaning
External cleaning
Cleaning the filters
Prolonged periods of non-operation
Frost precautions
Moving the machine
23
23
23
23
23
23
* 89/336 or 3.5.89 (Electrom agnetic
Com patibility Directive) and subsequent
m odifications.
Som ething Not Working
Repairs - After Sales Service
Spare Parts
24
25
25
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of the Appliance
1. Upper basket stop
2. Water hardness dial
3. Salt container
4. Detergent dispenser
5. Control panel
6. Rating plate
7. Rinse aid dispenser
8. Filters
9. Lower spray arm
10. Upper spray arm
11. Upper basket
12. Worktop
IN154
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
It is dangerous to alter the specifications or attempt to
modify this product in any way.
Care must be taken to ensure that the appliance does not
stand on the electrical supply cable.
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or
competent person.
Technical specifications
Dimensions
Width
45 cm
85 cm
82 cm
Height with worktop
Height without worktop
Max depth
61 cm
Max depth with open door
118.5 cm
Electrical connection:
Voltage
Information on the electrical connection is given on the rating plate on the inner
edge of the dishwasher’s door.
Overall power
Fuse
Water supply pressure
Minimum
Maximum
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
Capacity
9 place settings
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
W ater outlet hose connection
The end of the drain hose can be connected in the following
G
Remove all packaging before positioning the machine.
ways:
G
If possible, position the machine next to a water tap and a
drain.
1. To the sink outlet spigot, securing it to the underside of
the work surface.This will prevent waste water from the
sink running into the machine.
2. To a stand pipe provided with vent-hole, minimum internal
W ater supply connections
We recommend that this dishwasher is connected to your cold
diameter 4 cm.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
water supply.
For making the connection itself, the coupling nut fitted to the
machine’s supply hose is designed to screw onto either a 3/4"
inch gas thread spout or to a purpose made quick-coupling tap
such as the Press-block.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could prevent or
slow down the discharge of water.
The water pressure must be within the limits given in the
"Technical specifications".Your local Water Authority will advise
you on the average mains pressure in your area.
The sink plug must not be in place when the machine is draining
as this could cause the water to syphon back into the machine.
The water inlet hose must not be kinked, crushed, or entangled
when it is being connected up.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
The dishwasher features fill and drain hoses which can be turned
either to the left or the right to suit the installation by means of
the locknut. The locknut m ust be correctly fitted to
avoid water leaks. (Im portant! NOT all models of
dishwashers have fill and drain hoses provided with locknut.
In this case, this kind of facility is not possible).
If the machine is connected to new pipes or pipes which
have not been used for a long time, you should run the water
for a few minutes before connecting the inlet hose.
DO NOT use connection hoses which have previously
been used for an old appliance.
This appliance has been fitted with safety features which will
prevent the water used in the appliance from returning back into
the drinking water system.This appliance complies with the
applicable plumbing regulations.
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
Im portant!
Our appliances are supplied with a security device to protect
against the return of dirty water back into the machine.
If the spigot of your sink has a "no return valve" incorporated this
can prevent the correct draining of your dishwasher.
We therefore advise you to remove it.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
Proceed as follows:
Remove the machine’s worktop by unscrewing the two rear
retaining screws, pull the worktop from the back of the machine
and slide out the front slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet.When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
During all operations that involve accessibility to internal
components the dishwasher has to be unplugged.
Be sure that once the appliance has been installed, it is easily
accessible for the service engineer in the event that a repair is
required.
If the dishwasher is later used as a free-standing appliance, the
original worktop must be re-mounted.
The plinth on free-standing appliances is not adjustable.
Levelling
Good levelling is essential for correct closure and sealing of the
door.
When the appliance is correctly levelled, the door will not catch
on either side of the cabinet.
If the door does not close correctly, loosen or tighten the
adjustable feet until the machine is perfectly level.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Any electrical work required to install this appliance should be
carried out by a qualified electrician or competent person.
If you fit your own plug, the colours of the wires in the mains lead
of your appliance may not correspond with the markings
identifying the terminals in your plug.
WARNING:THIS APPLIANCE MUST BE
EARTHED.
Proceed as follows:
1. Connect the Green andYellow (earth) wire to the terminal
Im portant!
in the plug which is marked with the letter "E" or the earth
If the m ains supply cable is dam aged it
m ust be replaced; contact our warranty
adm inistrators see page 25.
symbol
or coloured green and yellow.
2. Connect the Blue (neutral) wire to the terminal in the plug
which is marked with the letter "N" or coloured black.
The m anufacturer declines any liability
should this safety m easure not be
observed.
3. Connect the Brown (live) wire to the terminal in the plug
which is marked with the letter "L" or coloured red.
4. Upon completion there must be no cut, or stray strands of
wire present and the cord clamp must be secure over the
outer sheath.
Before switching on, make sure the electricity supply voltage is
the same as that indicated on the appliance’s rating plate.The
rating plate is located on the side of the dishwasher’s door.
The plug must not be used if the fuse cover/carrier is lost.The
cover/carrier is indicated by the coloured insert at the base of
the plug.
A replacement cover/carrier must be obtained from your local
Service Force centre. Please contact our extended warranty
administrators see page 25.
WARNING:
A cut off plug inserted into a 13 am p socket is a
serious safety (shock) hazard. Ensure that the cut
off plug is disposed of safely.
The plug moulded onto the lead incorporates a 13amp BSI362
fuse. Only ASTA or BSI fuses should be used.
The plug m ust still be accessible after
the appliance has been installed.
To isolate the dishwasher from mains, remove the mains plug.
If the plug that is fitted to your appliance is not suitable for the
socket, it must be cut off and the appropriate plug fitted.
The appliance should not be connected
to the electrical supply by m eans of an
extension cable.
Im portant
The wires on the mains lead are coloured in accordance with the
following code:
Perm anent connection
Green and Yellow
Blue
- Earth
- Neutral
- Live
In the case of permanent connection it is necessary that you
install a double pole switch between the appliance and the
electricity supply (mains), with a minimum gap of 3mm between
the switch contacts and of a type suitable for the required load in
compliance with the current electrical regulations.
Brown
The switch must not break the yellow and green earth cable at
any point.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The Control Panel
7
1
3
6
5
8
2
9
11
4
10
1. O n/O ff indicator light
2. O n/O ff buton
7. Program m e phase indicator lights
W ashing:
illuminates when the washing and
rinsing phases are running.
Drying:
illuminates when the drying phase
is running.
3. Function buttons
In addition to the dishwashing programme selected, the following
functions can also be set with the help of these buttons:
End of cycle illuminates when the washing
- the setting of the water softener,
programme has ended.
- activation/deactivation of the rinse aid dispenser,
- the cancelling of a programme in progress.
As soon as you select a washing programme, the phase indicator
lights foreseen for that programme will start flashing.As the
programme starts, the phase indicator lights will turn off except
for the indicator light of the phase in progress which will remain
lit with a static light.
4. Program m e selection buttons
The selection of a washing programme occurs by pressing one of
these buttons (see "Washing programmes chart" see page 20).
8. Control indicator lights
5.The digital display indicates:
- the level of hardness to which the water softener is set,
- if the rinse aid dispenser is activated/deactivated,
- the approximate remaining time of the running programme,
Salt:
salt refilling indicator light,
illuminates when the salt has run out
Rinse aid
rinse aid refilling indicator light,
illuminates when the rinse aid has
run out
- the end of the programme (a zero will appear in the digital
display),
- the countdown of the delay start,
The salt and rinse aid indicator lights are never illuminated while
a washing programme is running even if filling with salt and rinse
aid is necessary.
- fault codes concerning malfunction of the dishwasher.
6. Program m e tim e indicator light
Illuminates with a back light when a washing programme has been
set and remains illuminated until the appliance is switched off.
9. Delay start button
This option allows the start of the programme to be delayed
from 1 to 19 hours.
When delay start has been set, this indicator light turns off and
will illuminate once the countdown has elapsed and the washing
programme has started.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press function button 2, the indicator lights of function
buttons 1 and 3 turn off while the indicator light of function
button 2 goes on flashing, the digital display indicates the
current setting.
10. Multi tab button
This appliance is equipped with the “Multi tab” function, that
allows the use of the combi detergent tablets with a combined
cleaning, rinsing and salt function (“3 in 1”,“4 in 1” etc...).
Rinse aid dispenser deactivated
Rinse aid dispenser activated
Before using the “Multi tab” function, check that
the water hardness level in your area com plies
with the detergent m anufacturers
recom m endations.
4. To change the setting, press function button 2 again, the
This function can be selected with all washing programmes.
digital display indicates the new setting.
With the selection of this function the inflow of rinse aid and salt
from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid are
deactivated.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button.
11. Half load button
Select the “Multi tab” function before the set of a washing
programme.
This option is useful and economical when only a small load
needs washing reducing the consumption of water and energy.
Once selected this option (Multi tab back light illuminated) it
will remain active also for the following washing programmes.
To deactivate the function, press the button (Multi tab back
light off).
This option must be linked to the selection of a washing
programme. (Programmes with this option are indicated in the
"Washing programmes" chart on page 20).
When selected, a back light will illuminate "Half load".
With the use of the “Multi tab” function, the cycle durations
may change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
Load the dishes into both baskets (upper basket and lower
basket).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
NOTE: Once the programme is running, the “Multi tab”
function can NO longer be changed. If you want to exclude the
“Multi tab” function you have to cancel the programme setting
(see chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the “Multi tab”
function. In this case you have to set a washing programme (and
desired options) again.
NOTE: if the drying results are not satisfactory we suggest that
you activate the rinse aid dispenser.
The activation/deactivation of the rinse aid dispenser can only be
possible with the “Multi tab” function active.
Activation/deactivation of the rinse aid
dispenser
The dishwasher must be switched off
W hen the rinse aid dispenser has been activated, the
rinse aid indicator light on the control panel is
autom atically activated.
1. Press the On/Off button.The On/Off indicator light and all
the programme indicator lights will illuminate (setting mode).
If only one programme button indicator light is on, this means that
a washing programme is set.The programme must be cancelled:
press simultaneously function buttons 1 and 2 for about 2
seconds.All programme indicator lights will illuminate indicating
that the set programme has been cancelled and the machine is
now in setting mode.
2. Press simultaneously function buttons 1 and 2, until the
indicator lights of function buttons 1, 2 and 3 start flashing.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
W hen the Dishwasher is first installed
Before using your dishwasher for the first time:
1. Ensure that the electrical and water connections comply with
the installation instructions
2. Remove all packaging from inside the appliance
3. Set the water softener
4. Pour 1 litre of water inside the salt container and then fill with
dishwasher salt
5. Fill the rinse aid dispenser
NOTE:
If you want to use the "3 in 1" - "4 in 1" com bi tablet
detergents, carefully read the inform ation given in
"Different kinds of detergents".
The water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these minerals and salts, the harder
your water is.
Water hardness is measured in equivalent scales, Clarke degrees,
French degrees (°TH) and mmol/l (millimol per litre -
international unit for the hardness of water).
The softener should be adjusted according to the hardness of the
water in your area.Your local Water Authority can advise you on
the hardness of the water in your area.
The water softener must be set in both ways: manually, using the
water hardness dial and electronically, using the function buttons
on the control panel.
W ater hardness
°TH
Adjusting the water hardness setting
Level indicated on the
digital display
Use of salt
Clarke
m m ol/l
electronically
level 10
manually
2
64 - 88
91 - 125
9,0 - 12,5
yes
yes
yes
yes
yes
yes
yes
yes
yes
no
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
76 - 90
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
< 0,7
2
2
level 9
level 8
level 7
level 6
level 5
level 4
level 3
level 2
level 1
2
2
2
1
1
1
1
< 5
< 7
The water softener must be set in both ways: manually, using the
water hardness dial and electronically, using the function buttons
on the control panel.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
a) Setting m anually
Filling with dishwasher salt
1. Open the dishwasher door.
O nly use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will dam age the water
softener.
O nly fill with salt just before starting one of the
com plete washing program m es.
This will prevent any grains of salt or salty water, which
m ay have been spilt, rem aining on the bottom of the
m achine for any period of tim e, which m ay cause
corrosion.
2. Remove the lower basket from the dishwasher.
3. Turn the water hardness dial to position 1 or 2 (see table).
4. Replace the lower basket.
The dishwasher is factory
set at position 2.
To fill:
1. Open the door, remove the lower basket and unscrew the
cap of the salt container by turning it anticlockwise.
2. Pour 1 litre of water inside the container (this is necessary
only before filling with salt for the first tim e).
3. Using the funnel
b) Setting electronically
provided, pour in the salt
until the container is full.
The dishwasher must be switched off
NOTE: the electronic setting of the water softener is
possible O NLY with the Multi-tab function deactivated.
4. Replace the cap making
sure that there is no
trace of salt on the
screw thread or on the
gasket.
The dishwasher is factory set at level 5.
1. Press the On/Off button.The On/Off indicator light and all
the programme indicator lights will illuminate (setting mode).
If only one programme button indicator light is on, this means that
a washing programme is set.The programme must be cancelled:
press simultaneously function buttons 1 and 2 for about 2
seconds.All programme indicator lights will illuminate indicating
that the set programme has been cancelled and the machine is
now in setting mode.
5. Replace the cap tightly
turning it clockwise until it stops with a click.
The salt container will require topping up periodically.You are
reminded of this by the salt indicator light on the control panel
which comes on when the salt has finished.
2. Press simultaneously function buttons 1 and 2, until the
indicator lights of function buttons 1, 2, and 3 start flashing.
The salt indicator light on the control panel can rem ain
illum inated for 2-6 hours after the salt has been
replenished, assum ing the dishwasher rem ains switched
on. If you are using salts that take longer to dissolve then
it will take longer.The function of the m achine is not
affected.
3. Press function button 1, the indicator lights of function
buttons 2 and 3 turn off while the indicator light of function
button 1 goes on flashing, the digital display indicates the
current level.
Exam ple:
Do not worry if water over flows from the unit when filling with
salt, this is quite normal.
displayed = level 5.
4. To change the level, press function button 1. Each time the
button is pressed the level changes. (For the selection of the
new level see the chart).
Exam ples:
if the current level is 5, by pressing function button 1 once,
level 6 is selected.
if the current level is 10, by pressing function button 1 once,
level 1 is selected.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Rinse aid
Rinse aid is automatically added during the last rinse, ensuring
Adjusting the dose
According to the finish and drying results obtained, adjust the
dose of rinse aid by means of the 6 position selector (position 1
minimum dosage, position 6 maximum dosage).
thorough rinsing, and spot and streak free drying.
The dispenser, which is positioned inside the door, holds about
110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing
programmes, depending upon the dosage setting.
The dose is factory set in position 4.
Increase the dose if there
are drops of water or lime
spots on the dishes after
washing.
Filling with rinse aid
1. Open the container by
pressing the release
button (A).
Reduce it if there are sticky
whitish streaks on the
dishes or a bluish film on
glassware or knife blades.
2. Add the rinse aid until
the container is
completely full.
The maximum level for
filling is indicated by
"max".
Top up the rinse aid when the indicator light on the
control panel illum inates.
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an
absorbent cloth to avoid excess foam ing during
the next wash.
O nly use branded rinse aid for dishwashers, available also
from your local John Lewis store.
Never fill the rinse aid dispenser with any other
substances (e.g. dishwasher cleaning agent, liquid
detergent).This would dam age the appliance.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Dishwasher
G
Check if it’s necessary to refill with dishwasher salt or
rinse aid
Loading cutlery and dishes
Sponges, household cloths and any object that can
G
G
G
G
Load cutlery and dishes into the dishwasher.
Fill with dishwasher detergent .
absorb water m ay not be washed in the dishwasher.
G
Before loading the dishes, you should:
-
-
Remove all left over food and debris.
Soften remnants of burnt food in pans
Select a wash programme suitable for the cutlery and dishes.
Start the wash programme.
G
When loading the dishes and cutlery, please note:
- Dishes and cutlery must not impede the rotation of the
spray arms .
- Load hollow items such as cups, glasses, pans, etc. with the
opening downwards so that water cannot collect in the
container or a deep base.
- Dishes and items of cutlery must not lie inside one another,
or cover each other.
- To avoid damage to glasses, they must not touch.
- Lay small objects in the cutlery basket.
G
Plastic item s and pans with teflon have a tendency to
retain water drops; these item s will not dry as well as
porcelain and steel item s.
Beware: Som e cutlery / dishes are not suitable or of lim ited suitability to be washed in
dishwashers’
not suitable:
of lim ited suitability:
- Cutlery with wooden, bone, china or mother-of-pearl handles
- Plastic items that are not heat resistant
- Only wash stoneware in the dishwasher if it is specifically
marked as being dishwasher-safe by the manufacturer.
- Older cutlery with glued parts that is not temperature
resistant
- Glazed patterns may fade if machine washed frequently
- Silver and aluminium parts have a tendency to discolour
during washing. Residues, e.g. egg white, egg yolk and mustard
often cause discolouring and staining on silver.
Therefore always clean left-overs from silver immediately, if
it is not to be washed straight after use.
- Bonded cutlery items or dishes
- Pewter or copper items
- Lead crystal glass
- Steel items prone to rusting
- Wooden platters
- Some types of glass can become dull after a large number
of washes
- Items made from synthetic fibres
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Open the door and slide out the baskets to load the dishes.
The cutlery basket
W arning!
The lower basket
Long bladed knives stored in an upright
position are a potential hazard.
Long and/or sharp item s of cutlery such
as carving knives m ust be positioned
horizontally in the upper basket.
Take care when loading or unloading
sharp item s such as knives.
The lower basket is
designed to take saucepans,
lids, plates, salad bowls,
cutlery etc.
Serving dishes and large lids
should be arranged around
the edge of the basket,
ensuring that the spray arms
can turn freely.
Forks and spoons should be placed in the removable cutlery
basket with the handles facing downwards and the knives with
their handles facing upwards.
If the handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery with the
handles facing upwards.
Mix spoons with other cutlery to prevent them from sticking
together.
For best results we
recommend you to use the
cutlery grid provided (if the
size and dimensions of the
cutlery allow it).
The rows of prongs on the
lower basket can be easily
lowered to allow you to
load pots, pans and bowls.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
The upper basket
Adjusting the height of the upper
basket
If washing very large plates you can load them in the lower basket
after moving the upper basket to the higher position.
The upper basket is designed for plates (dessert plates, saucers,
dinner plates of up to 24 cm
in diameter), salad bowls,
cups and glasses.
Arrange items on and
Maxim um height of the dishes in
underneath the cup racks so
that water can reach all
surfaces.
For taller items, the cup
racks can be folded
upper basket
20 cm
lower basket
31 cm
With upper basket raised
With upper basket lowered
24 cm
27 cm
upwards.
To m ove to the higher position proceed as
follows:
Light items (plastic bowls
etc.) must be loaded in the
upper basket and arranged
so they do not move.
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards until the mechanism is
engaged and the basket is stable.
W arning!
Never lift or lower the
basket on one side only
For glasses with long stems
(according to the size and
dimensions), set the glass
holder to the left-hand or
right-hand position.
In case you need to load
dishes in the upper basket,
the glass holder must be in
the right-hand position.
When the basket is in
the higher position you
will not be able to use
the cup rack(s).
To lower the basket to the original position
proceed as follows:
1. Pull out the basket until it stops.
2. Carefully lift both sides upwards and then allow the
mechanism to drop back down slowly, keeping hold of it.
After loading your m achine always close the door,
as an open door can be a hazard.
Before closing the door, ensure that the spray
arm s can rotate freely.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Use of detergent
O nly use detergents specifically designed for use
in dishwashers.
Please observe the m anufacturer’s dosing and
storage recom m endations as stated on the
detergent packaging.
Using no m ore than the correct am ount of
detergent contributes to reducing pollution.
Fill with detergent
1. If the lid is closed: press release button (1).The lid springs
open.
2. Fill the detergent dispenser (2) with detergent.
The marking indicates the dosing levels:
20 = approximately 20 g of detergent
30 = approximately 30 g of detergent
3. All programmes with prewash need an additional
detergent dose (5/10 g) that must be placed in the
prewash detergent chamber (3).This detergent will take
effect during the prewash phase.
4. Close the lid and press until it locks in place.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Different kinds of detergent
Concentrated detergent
Modern detergents for dishwashers are almost exclusively low-
alkaline concentrated detergents with natural enzymes in tablet
form.
Detergent tablets
Detergent tablets from different manufactures dissolve at
different rates. For this reason, some detergent tablets do not
attain their full cleaning power during short washing programmes.
Therefore please use long washing programmes when using
detergent tablets, to ensure the complete removal of detergent
residuals.
Using 50°C washing programmes in conjunction with these
concentrated detergents reduces pollution and is good for your
dishes, as these washing programmes are specially matched to the
dirt-dissolving properties of the enzymes in concentrated
detergents. It is for this reason that using 50°C washing
programmes in conjunction with concentrated detergents can
achieve the same cleaning results that can otherwise only be
achieved using 65°C washing programmes.
Use of com bi tablet detergents
These products are detergents with a combined cleaning, rinsing
and salt function.
1. Check whether these detergents are suitable for your water
hardness. Follow the manufacturers instructions.
2. Set the "Multi tab" function.
3. Before the start of the washing programme put the tablet
detergent in the detergent dispenser.
NOTE: If the drying results are not satisfactory we
recommend that you:
1. Fill up the rinse aid dispenser with rinse aid.
2. Activate the rinse aid dispenser and set the rinse aid
dosage to position 2.
If you decide to turn back to the use of the
standard detergent system we advise that you:
G Deactivate the "Multi tab" function.
G Fill up the dispensers for salt and rinse aid again.
G Adjust the water hardness setting to the highest setting
perform up to 3 normal washing programmes without
loading any dishes.
G Adjust the water hardness setting according to the
hardness of the water in your area.
G Adjust the rinse aid dosage.
NOTE:When using 4 in 1 or 5 in 1 detergents that
integrate also anti-glass corrosion agent into "3 in 1" formula,
please follow the same indication as given for "3 in 1" detergents.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
W ashing Program m es
Program m e
Degree of soil
and
Half load
option
Cycle
(3) Consum ption values
description
Energy
consum ption
(in kWh)
W ater
consum ption
(in litres)
type of load
Hot prewash
Yes
Heavy soil.
Crockery, cutlery,
pots and pans
Main wash up to 70°C
2 warm rinses
1 hot rinse
70°
Intensive
(Prewash phase
automatically excluded
- no detergent for
prewash phase)
1,7 - 1,9
1,2 - 1,6
1,05
23 - 25
12 - 25
15
Drying
Cold prewash
Normal soil.
Crockery and
cutlery
Main wash up to 65°C or 50°C
1 or 2 cold rinses
1 hot rinse
(1)
Auto
No
Drying
Cold prewash
Main wash up to 50°C
1 cold rinse
1 hot rinse
Drying
Normal soil.
Crockery and
cutlery
(2)
50°
Economy
Yes
(Duration of washing
programme will be
reduced)
Light soil.
Crockery and
cutlery
Main wash up to 60°C
1 hot rinse
Q uick
wash
No
No
0,8
9
Main wash up to 45°C
1 warm rinse
1 hot rinse
Normal soil.
Delicate crockery
and glassware
45°
Glass
0,6 - 0,7
11 - 12
Drying
Any.
1 cold rinse (to avoid food scraps
from sticking together).
Partial load (to be
completed later in the
day or when the
dishwasher is full).
Rinse
hold
No
0,1
4
This programme does not require
the use of detergent.
(1) "Auto" washing program m e
(2) Testing programme for EN 50242 (see "Hints for Test
Centres").This programme, developed for the use of
detergents with enzymes, allows you to achieve, with reduced
consumption of energy the same cleaning results that would
otherwise be obtained only with the 65°C programmes and
conventional detergents.To compensate the lower
temperature, the duration of washing and drying have been
extended.
During the "Auto" washing programme the amount of soil on
the dishes is determined by how cloudy the water is.
If the appliance is partially loaded and the dishes lightly soiled,
the "prewash", "main wash", and "rinse" phases of the
programme are shorter and the water consumption level is
lower.
If the appliance is fully loaded and the dishes heavily soiled,
the "prewash", "main wash", and "rinse" phases of the
programme are longer and the water consumption level is
higher.
(3) The consumption values are intended as a guide and depends
on the pressure and the temperature of the water and also
by the variations of the power supply.
During the "Auto" programme the temperature of the main
wash water is also automatically adjusted between 50°C
and 65°C depending on the amount of soil on the dishes.
The programme duration is visible in the display when the
setting of the programme occurs.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting a W ashing Program m e
The opening of the door during the countdown will not
modify the delay start.
1. Check that the baskets have
been loaded correctly and that
Once the delay start has elapsed the programme will
start automatically.
the spray arm s can rotate freely
Note: With the delay start function set, the
“Programme time” back light is off. Once the
countdown of the delay start has elapsed, the washing
programme will start automatically and the “Programme
time” back light will illuminate.
2. Turn on the water tap
3. Close the dishwasher door
Note: it is possible to select a washing programme and
the delay start with the door open.
4. Press the O n/O ff button
In this case the start of the programme or the count-
down will only commence after the closure of the door.
Until that moment it is possible to modify the settings
made.
The On/Off indicator light and all the programme
indicator lights illuminate.
5. Setting and starting the
program m e
6. To interrupt or cancel a washing
program m e in progress
To select a programme, press the button of the
programme you wish to select, (see "Washing
programmes" chart), the indicator light of the selected
programme button remains illuminated while the other
programme indicator lights turn off. In the digital display
will appear, flashing, the running time of the programme
that has been set (in minutes).
The indicator lights of the phases foreseen for that
programme and the “Programme time” back light
will illuminate.
Interrupt or cancel a washing
program m e in progress O NLY if it’s
absolutely necessary.
Attention! Hot steam may escape when the door is
opened. O pen the door carefully.
Interrupt a washing program m e in
progress
Select, if desired, within 3 seconds, the “Half load” option
(be sure that the option is available with the selected
washing programme).
a) Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point at which it was interrupted.
After about 3 seconds from the last pressure of a button
the programme starts automatically.
b) Press the On/Off button, in this case all the indicator
lights turn off. Press the On/Off button again; the
programme will start from the point at which it was
interrupted.
In the digital display the running time of the programme is
no longer flashing, the Programme time back light
remains illuminated and the indicator lights of the phases
will turn off except for the phase underway.
Cancel a washing program m e in progress
To cancel a washing programme you have to reset the
dishwasher; press simultaneously function buttons 1 and
2 for about 2 seconds.After about 2 seconds all the
programme indicator lights will illuminate indicating that
the running programme has been cancelled.
Setting and starting the program m e with
the delay start
The setting of the delay start occurs before selecting
the programme
Press the delay start button until the flashing number of
the hours for the delay start will appear in the digital
display (from 1h to 19h).
If a new washing programme is to be selected, check that
there is detergent in the detergent dispenser.
“Delay start” back light illuminates.
7. To cancel a delay start
Select a washing programme (see “Washing programmes”
chart). In the digital display will appear, for a moment, the
running time of the programme and then again appears
the selected delay start time.
To cancel a delay start in progress you have to reset the
dishwasher; follow the same instructions given in “Cancel
a washing programme in progress”. Cancelling a delay
start involves also the cancelling of the washing
programme set.
As soon as the number of hours is displayed without
flashing, the countdown for the delay start is active.The
countdown will decrease with steps of 1 hour.
In this case you have to set the washing programme
again.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
8. End of the washing program m e
The dishwasher will automatically stop.
The “End of cycle” indicator light illuminates.
The “Programme time” backlit light and the indicator light
of the programme just ended will remain on.
In the digital display appears 0, only in this case the
programme has ended.
Switch off the dishwasher by pressing the On/Off button.
Open the dishwasher’s door, leave it ajar and wait a few
minutes before removing the dishes; in this way they will
be cooler and the drying will be improved.
9. Unloading the dishwasher
Hot dishes are sensitive to knocks.The dishes should
therefore be allowed to cool down before removing from
the appliance.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
Water may appear on the sides and the door of the
dishwasher as the stainless steel will eventually become
cooler than the dishes.
W hen the washing program m e has
finished, it is recom m ended that the
dishwasher is unplugged and the water
tap turned off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Cleaning
You must disconnect the appliance from the electricity supply,
before you can carry out any cleaning and maintenance work.
7. Put the flat filter (C) back in the base of the washing
compartment.
8. Place the coarse filter (A) in the microfilter (B) and press
External cleaning
together.
9. Put the filter combination in place and lock by turning the
handle clockwise to the stop. During this process ensure
that the flat filter does not protrude above the base of the
washing compartment.
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral detergents.
Never use abrasive products, scouring pads or solvent (acetone,
trichloroethylene etc....).
Ensure that the seals around the door, the detergent and rinse aid
dispensers are cleaned regularly with a damp cloth.
W arning!
Under no circum stances m ay the dishwasher be
used without filters. Incorrect repositioning and
fitting of the filters will produce poor washing
results.
We recommend every 3 months to run a 65°C wash programme
without dishes using detergent.
Cleaning the filters
The filters must be checked and cleaned from time to time. Dirty
filters will degrade the washing result.
NEVER try to rem ove
the upper spray arm .
If residues of soil have
1. Open the door, remove the lower basket.
clogged the holes in the
upper spray arm, remove
them with a cocktail stick.
2. The dishwasher filter system comprises a coarse filter (A),
a microfilter (B) and a flat filter (C).
Unlock the filter system using the handle on the microfilter,
and remove.
Prolonged periods of non-operation
If you are not using the machine for any period of time you are
advised to:
1
1. Unplug the appliance and then turn off the water.
3. Turn the handle about /4 a turn anticlockwise and remove.
2. Leave the door ajar to prevent the formation of any
unpleasant smells.
3. Leave the inside of the machine clean.
Frost precautions
Avoid placing the machine in a location where the temperature is
below 0°C. If this is unavoidable, empty the machine, close the
appliance door, disconnect the water inlet pipe and empty it.
4. Take hold of the coarse filter (A) by the handle with the hole
and remove from the microfilter (B).
5. Clean all filters thoroughly under running water.
6. Remove the flat filter (C) from the base of the washing
Moving the m achine
If you have to move the machine (moving house etc....):
compartment and clean both faces thoroughly.
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Som ething Not Working
If the dishwasher is not working correctly, please carry out the following checks, before contacting your local Service Force agent.
Im portant! If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be
made even if the appliance is under guarantee.
...a flashing fault code appears
The dishwasher will not start or stops during operation and a sequence of intermittent audible signals are heard.
The intervention of an alarm is indicated by:
-
-
the continuous flashing of the indicator light of the running programme,
a fault code (as described in the chart) is visible in the digital display.
Open the door and carry out the following suggested corrective actions.
Possible cause
Sym pton
Solutions
The water tap is blocked or furred with
limescale.
Clean the water tap.
-
in the digital display
appears
The water tap is turned off.
Turn the water tap on.
The machine does not fill with water.
The filter (where present) in the threaded
hose fitting at the water inlet valve is
blocked.
Clean the filter in the threaded hose fitting.
The water inlet hose has not been correctly Check the water inlet hose connection.
laid or it is bent or squashed.
-
in the digital display
appears
The sink spigot is blocked.
Clean out the sink spigot.
The water drain hose has not been
Check the water drain hose connection.
The dishwasher will not drain.
correctly laid or it is bent or squashed.
Close the water tap and contact our extended warranty
administrators, refer to Repairs - After Sales Service on
page 25.
Anti-flood device has activated.
-
in the digital display
appears
Once the checks have been carried out, close the door and press the button of the programme that was running before the intervention
of the alarm.The programme will continue from the point at which it was interrupted. If the fault code reappears or if another fault code
not described above appears contact our extended warranty administrators, refer to Repairs - After Sales Service on page 25.
Attention: once having verified which kind of malfunction has occurred, before carrying out the checks the appliance MUST be
switched off.
...there are problem s when operating the dishwasher
Sym ptom
Possible cause
Solutions
The dishwasher door has not been properly closed.
Close the door.
The programme does not start
The main plug is not plugged in.
Insert the mains plug.
Replace the fuse.
The fuse has blown in the household fuse box.
Delay start has been selected.
If dishes are to be washed immediately, cancel
the delay start.
There is a whistling noise during
washing
Use a different brand of detergent.
The whistling is not a cause for concern.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
...the wash results are not
satisfactory
The dishes are not clean
Repairs - After Sales Service
If the unlikely event of your appliance requiring service, or if you
wish to purchase spare parts, please contact our extended warranty
administrators by telephoning:
G
The wrong washing programme has been selected.
0870 010 7887
G
The dishes were arranged in such a way as to stop water
reaching all parts of the surface.The baskets must not be
overloaded.
They will give you details of your local Service Force Centre.
Before calling out an engineer, please ensure you have read the
details under the heading “Something Not Working”.
When you contact your local Service Force Centre you will need
to give the following details:
G
G
The spray arms do not rotate freely due to wrong
arrangement of the load.
The filters in the base of the washing compartment are dirty
or incorrectly positioned.
1. Your name, address and post code
2. Your telephone number
G
G
Too little or no detergent has been used.
3. Clear and concise details of fault
4. The purchase date (found on your receipt)
Where there are limescale deposits on the dishes; the salt
container is empty or the wrong level of the water softener
has been selected.
5. The model and serial number of the appliance (found on the
rating plate - see picture)
G
G
The drain hose connection is not correct.
The salt container cap is not properly closed.
The dishes are wet and dull
G
Rinse aid was not used.
G
The rinse aid dispenser is empty.
There are streaks, m ilky spots or a bluish
coating on glasses and dishes
So that you always have these numbers at hand, we recommend
that you make a note of them here:
G
Decrease rinse aid dosing.
Mod. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PNC : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S.N. : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
W ater drops have dried onto glasses and dishes
G
Increase rinse aid dosing.
G
The detergent may be the cause. Contact the detergent
manufacturer’s consumer care line.
Your dishwasher is covered by a 3 year parts and labour
guarantee (see separate details given at point of sale). Please
retain your purchase receipt safely for the service engineer to
verify the purchase details.
Spare Parts
Always insist on genuine spare parts.
An authorised service engineer should service this product and
only genuine spare parts should be used.
Under no circumstances should you attempt to repair the
machine yourself. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. Contact your local
Service Force Centre by telephoning:
0870 010 7887
An authorised service engineer always insist on genuine spare
parts.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
152951 89/0
03/06
Download from Www.Somanuals.com. All Manuals Search And Download.
|