Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you!
Voice coil leads are ingeniously interwoven into the
spider assembly to virtually eliminate cone “lead slap”;
this reduces low frequency distortion and increases
reliability. XRS speakers utilize Kapton voice coil
formers. These reduce the cone weight, enhance
speaker efficiency, and dramatically improves power
handling.
Thank you for your purchase of these JENSEN mobile
speakers. JENSEN has been delivering great sounds for
more than 75 years, and is well known for its technology
leadership in the acoustic arena. Always at the
industry’s forefront, JENSEN speakers provide abundant
features, extreme power handling, and tremendous
versatility. The smooth, hip style is included.
For installation assistance, the XRS speakers use nickel-
plated quick release push terminals and low profile ABS
grilles to reduce installation hassles.
'We're all about the music'
Highlighted Features
Actually we invented the sound you still hear today. Take
a listen to our scorching hot XRS Series speakers
incorporating the latest speaker technology from
JENSEN.
!
!
CSTT Clear-Sound Tweeter TechnologyÔ
Teteron Dome Material, for Extended Frequency
Response
JENSEN's Sound Lab utilizes their latest innovation,
(CSTT) Clear-Sound Tweeter TechnologyÔ. CSTT is
designed around Teteron, a revolutionary light weight
textile dome material - so light weight it's almost clear. It
has very low moving mass for superior imaging, teeming
smooth high frequency response, low distortion and
excellent dynamic range. Super swivel-ability tweeter
means super flexible installations for almost any
application.
!
Coaxial Super Swivel Tweeter Base Design for
Installation Flexibility
IMTPW- Injection Molded Titanium Poly-Cone Woofer
Nitrile Rubber Surround - Endures Temperature
Extremes and Outlasts Ordinary foam Surrounds
Kapton Voice Coil Formers
Low Profile ABS Grilles
Rubber Magnet Boot Cover
Nickel Plated Quick Release Push Terminals
Cold Rolled Stamped Steel Basket
!
!
!
!
!
!
!
Our newly perfected Injection Molded Titanium-Lum
Poly-Cone Woofer (IMTPW) delivers deep rich bass
response and natural mid-range nuance reproduction,
replicating true-to-life vocals & music.
Unlike foam surrounds, our ultra durable Nitrile rubber
suspension system absorbs undesired cone resonance's
to enhance the overall frequency response of the
speaker. It also keeps the cone centered and endures
more extreme environmental conditions than standard
foam surrounds.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Welcome to Jensen!
Preparation
!
Disconnect battery cable from negative ( - ) battery
terminal.
This manual is designed to provide information for the
owner, salesperson and installer. For those of you who
want quick information on how to install this product,
please turn to the Installation Section of this manual.
Other information can be located by using the Table of
Contents. We at Jensen have worked very hard to
make sure all the information in this manual is current.
But, as we are constantly finding new ways to improve
our product, this information is subject to change without
notice.
WARNING: Check vehicle's owner's manual
before disconnecting the battery. Disconnecting
the battery in some vehicles may require an anti-
theft code when reconnecting. Some vehicles
may run rough after reconnecting the battery and
require that the on-board computer be reset at
the dealership. Check with your local dealer if
you are uncertain.
!
!
Check all safety regulations in your vehicle's owner's
manual.
Installation...................................................Page 3
Specifications..............................................Page 7
Warranty .....................................................Page 8
To ensure an obstacle-free fit, check and double
check mounting depth of the speakers against
available depth, as well as the location of window
mechanics, door handles, and window handles.
If using provided grilles, be sure mounting location is
sufficient distance from door and/or window handles.
!
If, after reading your manual, you still have questions
regarding this product, we recommend that you see your
Jensen dealer. If you need further assistance, you
can call us direct at 1-800-323-4815.
Required Tools
The following is a list of tools needed for installation:
!
!
!
!
!
!
!
#2 Phillips screwdriver
Battery post wrench
Hand held drill w/assorted bits
Wire strippers
Wire crimpers
Wire cutters
3mm allen wrench
Be sure to have your model number and date of
purchase available when you call. Please read your
warranty clearly and retain your receipt for possible
future use.
Since some of these Jensen Full Range Speakers are
most often used as direct replacements for stock
speakers, some of the following instructions will not
apply. For custom installations see your Authorized
Jensen Dealer.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Basic Installation Steps
FIGURE 2 - CONNECTING SPEAKER WIRES
Step 1: Remove existing speaker.
Step 2: Position new speaker and align with existing
mounting holes.
Step 3: Attach the positive (+) and negative (-) speaker
terminals (see FIGURE 2). Be sure to observe
proper polarity when connecting the wires.
Step 4: If not using factory grilles, attach grille.
Step 5: Mount speaker (using factory hardware when
possible).
(+) (-)
Push terminal UP to insert speaker wire.
Step 6: Reconnect negative battery terminal.
FIGURE 1 - DOOR PANEL INSTALLATION
FIGURE 3 - REAR DECK INSTALLATION
Grille
Door Panel
Speaker
3
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Installing with Adapter Ring
FIGURE 4 - ADAPTER RING INSTALLATION
Door Panel Adapter Ring Speaker
The XRS525 and XRS652 come with an adapter ring to
Grille
fit a variety of different openings. To use the adapter ring,
secure the adapter ring to the vehicle using sheet metal
screws, then attach the speaker to the ring with the
machine screws provided.
If using both the adapter ring and the supplied grilles
(not factory), you will have to provide additional M4
screws of the appropriate length for your application.
Rear Deck
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Using the Conversion Ring with the XRS802
FIGURE 6 - CONVERSION RING FRONT INSTALL
The conversion ring should be installed when an existing
6x9 hole is to be used for installation. If cutting a new
installation hole, the diameter should be 7 1/8” round,
making the conversion ring unnecessary.
Conversion
Ring
XRS802
Speaker
Door Panel
FIGURE 5 - CONVERSION RING BOTTOM INSTALL
FIGURE 7 - CONVERSION RING TOP INSTALL
Rear Deck
Rear Deck
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Adjusting the Swivel Tweeter
FIGURE 8 - ADJUSTING THE SWIVEL TWEETER
To get the best stereo imaging and most true-to-life
sound reproduction, the swivel tweeters should be
angled toward the listener's ears. To tilt the tweeter, push
the edge of the chrome tweeter bezel to rotate the
tweeter to the desired listening position. The bezel may
need to be rotated slightly before swiveling to achieve
the desired angle.
Avoid using excessive force while swiveling the tweeter,
as permanent damage can occur.
Push edge of swivel tweeter to angle it toward the listener's ear.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
XRS 525
XRS652
2-Way Full-Range
6.5"
XRS682
2-Way Full-Range
6" x 8"
XRS692
2-Way Full-Range
6" x 9"
XRS802
2-Way Full-Range
8"
Configuration
2-Way Full-Range
5.25"
Midrange Diameter
Super Tweeter
Diameter
19mm Swivel Tweeter
19mm Swivel Tweeter
19mm Swivel Tweeter
25mm Swivel Tweeter
25mm Swivel Tweeter
Frequency Response
Crossover
60Hz - 40kHz
40Hz - 40kHz
40Hz - 40kHz
37Hz - 40kHz
35Hz - 40kHz
6dB/Octave LPF;
6dB/Octave HPF
6dB/Octave LPF;
6dB/Octave HPF
6dB/Octave LPF;
6dB/Octave HPF
6dB/Octave LPF;
6dB/Octave HPF
6dB/Octave LPF;
6dB/Octave HPF
Power Handling
35 Watts RMS
175 Watts Peak
50 Watts RMS
250 Watts Peak
50 Watts RMS
250 Watts Peak
60 Watts RMS
300 Watts Peak
70 Watts RMS
350 Watts Peak
Sensitivity
90dB @ 1 watt/1 meter
91dB @ 1 watt/1 meter
88dB @ 1 watt/1 meter
92dB @ 1 watt/1 meter
91dB @ 1 watt/1 meter
Grilles Included
Mounting Hardware
Adapter Ring
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
No
Yes
Mounting Depth
Magnet Weight
2 1/2" (64mm)
9oz.
2 11/16" (68mm)
13oz.
2 11/16" (68mm)
11oz.
3 1/2" (90mm)
27oz.
3 5/8" (92mm)
27oz.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
Limited 1 Year Warranty - USA and Canada
Length of Warranty. This warranty from Audiovox
Electronics Corporation shall be in effect for a period of 1
year from the date of the first consumer purchase.
Persons Protected. This warranty will be enforceable by
the original owner during the warranty period so long as
proof of date of purchase from an authorized dealer is
presented whenever warranty service is required.
What is Covered. Except as otherwise specified below,
this warranty covers all defects in material and
workmanship in this product. The following are not
covered: damage resulting from accident, misuse,
abuse, neglect, product modification, improper
installation, incorrect line voltage, unauthorized repair or
failure to follow instructions supplied with the product;
damage occurring during shipment (claims must be
presented to the carrier); any plexiglass included with the
product; elimination of car static or other electrical
interferences; any product purchased outside USA or
Canada, or on which the serial number has been
defaced, modified or removed.
How You Can Get Service.
U.S. Purchasers. Please telephone Jensen Customer
Service at 1-800-323-4815.
Canadian Purchasers. The product should be returned
to the dealer from whom it was purchased and such
dealer either will service or arrange for service of the
product. If shipment of the product is required, it should
be packed properly. The original dated bill of sale must
always be included with the product as proof of warranty
coverage.
charges, but Audiovox Electronics Corporation will pay
the return shipping charges if the product is returned to
an address inside the USA or Canada.
Limitation of Implied or Statutory Warranties and
Conditions.
Exclusions. Audiovox Corp's liability is limited to the
repair or replacement, at our option, of any defective
product and shall not include special, indirect, incidental
or consequential damages of any kind. THIS
WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND
ALL OTHER WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE AND ANY
OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY
IN CONTRACT OR TORT, WHETHER OR NOT
ARISING FROM THE COMPANY'S NEGLIGENCE,
ACTUAL OR IMPUTED. NO PERSON OR
REPRESENTATIVE IS AUTHORIZED TO ASSUME FOR
THE COMPANY ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF THIS PRODUCT.
IN NO EVENT SHALL COMPANY BE LIABLE FOR
INDIRECT, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
What We Will Pay For. We will pay for all labor and
material expenses required to repair the product, but you
must pay any labor costs for the removal and/or
installation of the product. If the product is shipped for
warranty service, you must prepay the initial shipping
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Intel Wireless Office Headset A28553 01 User Manual
Jacuzzi Hot Tub BM85 User Manual
JBL Speaker System SCS125 User Manual
JVC Flat Panel Television HR DD858E EH User Manual
JVC VCR LPT0711 001B User Manual
Kenmore Gas Grill 14116223 User Manual
King Canada Trimmer BB F5216 User Manual
KitchenAid Microwave Oven KMHC319ESS User Manual
Kompernass Battery Charger TLG 1750 B2 User Manual
Konica Minolta Digital Camera DiMAGE X User Manual