®
DOCKING SPEAKER STATION FOR iPad, iPod AND iPhone
USER MANUAL
JiPS-290i
(iPod/iPhone/iPad Not Included)
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to
ensure your personal safety. However, improper use can result in potential electrical
shock or fire hazards. Please read all safety and operating instructions carefully before
installation and use, and keep these instructions handy for future reference. Take special
note of all warnings listed in these instructions and on the unit.
1. Read these instructions – All the safety and operating instructions should be read
before the appliance is operated.
2. Keep these instructions – The safety and operating instructions should be kept for
future reference.
3. Heed all warnings – All warnings on the appliance and in the operating instructions
should be adhered to.
4. Follow all instructions – All operation and use instructions should be followed.
5. Do not use this apparatus near water – The appliance should not be used near water;
for example, near a bath tub, washbowl, kitchen sink, laundry tub, in a wet basement,
or near a swimming pool.
6. Clean only with dry cloth – The appliance should be cleaned only as recommended
by the manufacturer.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions. The appliance should be situated so that its location or position does not
interfere with its proper ventilation. For example, the appliance should not be situated
on a bed, sofa, rug, or similar surface that may block the ventilation openings; or
placed in a built-in installation, such as a bookcase or cabinet that may impede the
flow of air through the ventilation openings.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
10.The system has as AC plug and will only fit into matching AC outlets. This is a safety
feature to reduce the possibility of electric shock. If the plug will not fit in your AC
outlets, you should have the outlet changed by qualified licensed electrician. Do not
use an adaptor to make the plug fit into your outlet. This defeats the safety feature
and could expose you to electric shock.
11.Only use attachments / accessories specified by the manufacturer.
12.Unplug this apparatus during lightning storms or when unused for long periods of
time.
13.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14.This appliance shall not be exposed to dripping or splashing water and that no object
filled with liquids such as vases shall be placed on the apparatus.
15.Power Sources – The appliance should be connected to a power supply only of the
type described in the operating instructions or as marked on the appliance. Do not
overload wall outlet.
16.Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
17.Do not attempt to dismantle, open or repair this product yourself. If a fault occurs,
seek advice from your local qualified service technician or contact the distributor via
the telephone number at the back of this instruction manual.
18.Caution marking and nameplate are located on back of product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTES
For best iPad display clarity, avoid operating the unit in the direct sunlight or under
bright light.
Avoid installing the unit in locations described below:
Places exposed to direct sunlight or close to heat radiating appliances such as
electric heaters.
Places subject to constant vibration.
Dusty, humid or moist places.
Sources of electrical noise such as fluorescent lamps or motors.
NOTE: when the system is switched to standby mode, it is still consuming some power.
To disconnect the system completely, remove the AC power plug from the wall outlet.
COMPLIANCE WITH FCC REGULATIONS
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from moving
when you operate the controls. These 'feet' are made from non-migrating rubber material
specially formulated to avoid leaving any marks or stains on your furniture. However
certain types of oil based furniture polishes, wood preservatives, or cleaning sprays may
cause the rubber 'feet' to soften, and leave marks or a rubber residue on the furniture. To
prevent any damage to your furniture we strongly recommend that you purchase small
self-adhesive felt pads, available at hardware stores and home improvement centers
everywhere, and apply these pads to the bottom of the rubber 'feet' before you place the
product on fine wooden furniture.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PRODUCT FEATURES
The JiPS-290i is an iPad / iPod / iPhone Docking Music System with incorporates the following
features:
Play and Charge Your iPad, iPhone, iPod nano, iPod touch.
Player Only for Your iPod classic and iPod video
Auxiliary input jack.
Stereo speakers with subwoofer.
Video Line-out Connector.
GETTING STATRTED
1. STANDARD ACCESSORIES
Carefully remove all the accessories from the display carton. Please verify that you have all the
following accessories before you dispose of the carton. Do not remove any labels or stickers on
the back panels of the main unit. Place the unit on a level surface such as a table, desk or shelf.
Instruction manual x 1
Remote control x 1
AC Adaptor x 1
Adjustable Support iPad/iPod/iPhone x 1
.
2. POWER SOURCE
This Music System operates on 120V AC~ 60Hz household power.
The remote control unit operates on one “CR2025” lithium battery (Included).
CONNECTING THE AC POWER
This system is designed to operate on 120V~ 60Hz household power only. Connecting this
system to any other power source may cause damage to the system and such damage is not
covered by your warranty.
An AC-DC Adaptor with 10V DC 3400mA output (included) is
required for operating the main unit. Connect the AC-DC Adaptor
to the unit and an AC outlet:
1.) Firmly and securely insert the DC plug of the adaptor into the
DC Jack on the unit
2.) Plug the Adaptor plug into a power outlet rated
at 120V AC~ 60Hz.
CAUTION: The system has an AC plug and will only fit into matching AC outlets. This is a safety
feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlets, you
should have the outlet changed by a qualified, licensed electrician. Do not use an adaptor to
make the plug fit into your outlet. This defeats the safety feature and could expose you to electric
shock.
NOTE: This unit is not magnetically shielded and may cause color distortion on the screen of
some TVs or video monitors. To avoid this, you may need to move the unit further away from the
TV or monitor if unnatural color shifts or image distortion occurs.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
The remote control works on one 3V
"CR2025 type" lithium battery
(included). To active the remote control, remove the insulation tab
inserted in the battery compartment. To remove the tab, pull it in the
direction of the arrow as shown in the illustration.
If the operation of the remote control becomes unsatisfactory, replace
the original battery with a new 3-volt lithium battery of the same type.
1. Slide out the battery holder from the remote control case. (Push tab
"A" towards the middle first, see diagram).
2. Replace the weak/dead battery with a new one. Be sure the battery is
installed correctly. The remote control will not work if the battery is
installed with wrong polarity,
CAUTION: Danger of explosion if the battery is replaced incorrectly.
Replace only with the same or equivalent type of battery.
3. Insert the battery holder back into the battery slot.
NOTE: Only use a well-known brand of cell battery to ensure the longest life and best
performance.
BATTERY CARE
i.
If the unit is not used for an extended period of time, remove the battery. An old or leaking
battery can cause damage to the unit and may void the warranty.
ii.
Do not dispose batteries in fire. Batteries may leak or explode.
iii.
Do not try to recharge batteries that are not intended to be recharged; they can overheat,
rupture and leak (Follow battery manufacturer’s directions).
iv. Only an adult should replace the battery. Do not leave it lying around where a young child or
pet could play with or swallow it.
LOCATION OF CONTROLS
FRONT PANEL OF THE UNIT
Download from Www.Somanuals.com. All Manuals Search And Download.
1.) Adjustable Support for iPad/iPod/iPhone
2.) Speaker Grill
3.) Remote Control Sensor
TOP PANEL OF THE UNIT
3.) VOLUME Down (-) Button
4.) VOLUME Up (+) Button
5.) POWER
ON/STANDBY; iPod/AUX FUNCTION select Button
6.) iPad/iPod/iPhone Dock Connector
REAR PANEL OF THE UNIT
7.) DC IN Jack
7
Download from Www.Somanuals.com. All Manuals Search And Download.
8.) AUX IN Jack
9.) Composite Video Out Connector
REMOTE CONTROL
1.) POWER ON/STANDBY Button
2.) iPod MENU UP Button
3.) PLAY / PAUSE Button
4.) SKIP/FAST BACKWARD Button
5.) ENTER Button
6.) SKIP/FAST FORWARD Button
7.) iPod MENU Button
8.) iPod MENU DOWN Button
9.) FUNCTION Button
10.) VIDEO ON/OFF Button
11.) MUTE Button
12.) VOLUME Up (+) Button
13.) VOLUME Down (–) Button
OPERATING INSTRUCTIONS
BASIC OPERATION
Turning on/off the unit
1). Press the POWER ON/STANDBY button on the remote control or
button on main unit to
turn on the unit. The rings around the POWER and VOLUME Up/Down Buttons will light solid
blue for iPad/iPod/iPhone mode or will flash blue every 4 seconds in AUX mode.
2). Press the remote POWER ON/STANDBY button again or press and hold the
main unit to switch the unit to standby mode.
button on
Notes:
Make sure the AC power cord from this unit is properly connected to a 120V~ 60Hz
household AC power outlet.
Make sure that the minimum distance around the whole unit for ventilation is 10cm.
Function mode selection
Press the FUNC button on the remote control or tap the FUNC button on top panel of the unit to
select iPod or AUX Mode.
iPad/iPod/iPhone mode - The blue rings around the VOLUME Up/Down and POWER buttons
light solid.
AUX mode – The blue rings around the VOLUME Up/Down and POWER buttons will flash every
4 seconds.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Volume Up( + ) / Down( - ) control
Press the VOLUME Up(+) / Down(-) button on the remote control or main unit to adjust the
volume to desired sound level.
Operating the MUTE function
When listening to an iPad/iPod/iPhone or while using the AUX IN, press the MUTE button on the
remote to activate the mute function, the blue rings around the POWER and VOLUME Up/Down
Buttons will begin flashing rapidly. The speaker sound is temporally muted. Press the Mute button
again to cancel the mute function or press the VOLUME+/- button to resume the normal playback
mode.
Mounting the iPad, iPod and iPhone Adjustable Support
The unit comes with an adjustable support for the back of the iPad/iPod/iPhone to rest on
when docked. Attach the adjustable support by sliding it onto the mounting bracket
located behind the 30-pin connector as shown below. Make sure the adjustable support
locks firmly into place before docking ANY iPod, iPad or iPhone to avoid damage the 30
pin connector.
Note: Do not attempt to dock your Apple device onto the unit before this adjustable
support has been securely attached. It may damage the 30-pin connector of the
unit and such damage is not covered by your warranty.
CAUTION
The Adjustable Support for the iPad, iPod and iPhone is not designed to be removed
once it’s installed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the position of the support by turning the barrel shaped knob (located on the back
of the assembly) either clockwise or counter-clockwise until the front padded part of the
barrel touches the back of your iPad, iPod or Phone. The barrel shaped knob will move
forward or back as it’s turned. The Apple device should be angled slightly backwards to
secure the docking.
LISTENING TO YOUR iPad/iPod/iPhone
RECHARGING YOUR APPLE DEVICE
This unit supports various models of iPad, iPod or iPhone with 30-pin dock connectors.
Even if the Dock is in standby mode, once your iPad, iPod or iPhone is docked onto the docking
connector, the charging will start automatically.
Note: Due to a change in iPod design, the charging function of this unit does not support the iPod
classic or 5th gen iPod video.
CONNECTING
1). Place your iPad/iPod/iPhone into the docking port by placing the connector on the bottom of
the iPad/iPod/iPhone onto the connector in the docking bay.
Note: Please be careful when placing the iPad/iPod/iPhone into the docking bay to avoid
damaging the 30-pin connector on the iPad/iPod/iPhone or on the docking system.
2). Press the POWER
button to turn on the unit, the blue rings around the VOLUME Up/Down
and POWER buttons light solid. If the unit is in AUX mode, the blue rings around the VOLUME
Up/Down and POWER buttons flash every 4 seconds. Press the FUNC button on remote
control or tap the FUNC button on the main unit to select iPod/iPad/iPhone mode, the blue
LED rings will light solid.
3) Select music from your iPad, iPod or iPhone and press the PLAY/PAUSE button on the remote
to start playback.
4). Press the PLAY/PAUSE button on the remote control to pause the play back. Press it again to
resume.
5). Adjust the sound level by pressing the Volume + / – buttons.
Note: The volume level cannot be adjusted using the volume control on your iPad/iPod/iPhone
after being docked.
6). Press SKIP/FAST FORWARD or BACKWARD button on the remote control to select the
previous or next song.
7). Press the STANDBY button on the remote control or press and hold the
5 seconds to turn the unit to STANDBY mode after listening.
/ FUNC button for
10
Download from Www.Somanuals.com. All Manuals Search And Download.
iPad/iPod/iPhone PLAYBACK (By Remote Control):
Press the PLAY/PAUSE
Press the SKIP or
Press and hold the SKIP
button to pause or resume the iPad/iPod/iPhone playback;
buttons to skip to the next or previous song;
or buttons for fast-forwarding or fast-rewinding during
playback.
From the remote, press the MENU button, ENTER button and / buttons on the remote
control to control the iPod menu, scroll menu up/down and enter selection.
Note: 1. The iPod Menu Control function will work with most iPod touch/iPhone models in iPod
mode. Please make sure your iPod/iPad/iPhone is in iPod/iPad/iPhone mode. The
function will NOT work if the iPod/iPad/iPhone is in MAIN or LOCKED screen.
2. The iPod menu navigating function of remote control will work on most iPhone or iPod
models except for the iPod nano 6th gen.
WATCH VIDEOS ON YOUR iPad
1. Dock your iPad carefully and securely onto the Docking Connector.
2. Press the POWER button on the main unit or remote to turn on the unit.
3. Access the video menu of your iPad and select the video clip you want to play.
4. Tap the Play icon on your iPad touch screen, the video will start play back on the LCD screen
of your iPad.
5. You can additionally watch your favorite Youtube videos when you are connected to the
internet via Wi-Fi, 2G or 3G cell phone networks.
6. High quality audio output from your videos will be playback through the built-in stereo
speakers.
7. After selecting the video you wish to view and it starts to play, press the Play/Pause
Button on remote to play or pause.
8. Press the
Button to advance to end of the current clip. Press and hold it during playback
for fast forward search within the clip.
9. Press the
Button to go to the start of current clip. Press and hold it during playback for
fast backward search within the clip.
10. Press the Volume Up (+) and Volume Down (-) buttons on the unit or remote to adjust the
volume output level.
11. Press the Mute Button of the remote to cut off the audio output from the speakers. Press
again to resume listening.
Note: The fast forward /reverse functions may not work for Youtube videos.
HOW TO WATCH VIDEOS ON A TV
1. Connect the Video Out Jack of the JiPS-290i to the composite video input of your external
TV with a suitable video cable (not included).
2. Securely dock your iPad, iPod or iPhone with video.
3. Press the POWER button to turn on the unit and access the video menu of your Apple
device and select the video clip you want to play. It will be played back on the LCD screen of
your Apple device.
Note: For the iPod nano (3rd generation and up), iPod video and iPod classic, select the “Videos”
or “Podcasts” menu to locate your favorite video clips on the Apple device’s LCD screen.
4.
5.
Press the Play/Pause button on remote to play or pause.
The remote control features a “Video On/Off" Button. If you are using iPad, iPod touch or
iPhone, pressing the Video On/Off Button once when the remote is pointing towards the IR
Sensor on the main unit, will change how the video is displayed.
6.
Tap the Apple device’s screen or press the MEMU / buttons on the remote control to
select the video you want to play and then press the ENTER button. Your Apple device will
show “TV Connected” message on its screen and the video will begin playing on the
external TV screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: MEMU / buttons on the remote control may not work for your iPad.
7.
The video can be switched between the local Apple device screen (default) and Video-out
by pressing VIDEO ON/OFF button and then select a video from video library to play.
Note: 1). If you are using iPad, you can simple press the VIDEO ON/OFF button and then
Play/Pause button to switch video play back on iPad’s screen or TV.
2). If you are using the iPod nano, iPod classic or iPod video, VIDEO ON/OFF button will
be no function for these iPod models, you need to turn on the TV Out option manually
from the video setting menu of your iPod.
8. Press the VOLUME Up (+) / Down (-) buttons on the unit or remote to adjust the sound output
level.
Note: If you remove the iPad / iPod / iPhone from the docking connector and dock it again later,
the Apple device will revert back to its default play mode and play videos on the screen of the
Apple device. You need to follow above instructions again to set TV Out of your Apple device if
you want to watch its videos on a TV.
AUXILIARY INPUT
This unit provides an auxiliary audio signal input jack for connecting external audio
devices like MP3 players, CD players and older, non-dockable iPods (except iPod shuffle
3rd gen) and listen to your external source through the speakers of this system.
1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the Aux-in jack on the main unit and the other end of the cable into
the Line-out Jack or Headphone Jack of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, press the FUNCTION button to select “AUX” mode. the
blue rings around the VOLUME Up/Down and POWER buttons flash every 4 seconds.
5. The volume level can now be controlled through the main unit. Operate all other
functions on the auxiliary device as usual.
Note:
(1) If you connected the Line Out Jack of your external device then you only need to
adjust the volume control of this system. If you connected the Headphone Jack of
your external device then you may need to adjust both the volume control of your
external device and the volume control of this system to find the most desirable
volume setting.
(2) Press the POWER
button to turning off the system when you finish listening. Don't
forget to switch off the power of your external device as well.
RESETTING
If the system does not respond or has erratic or intermittent operation, you may have
experienced an electrostatic discharge (ESD) or a power surge that triggered the internal
computer to shut down automatically. If this occurs, simply disconnect the main power,
wait one minute and reconnect the main power again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
3. For better Clock Display clarity, avoid operating the unit under direct sunlight or in strong room
illumination.
4. Unplug the unit from the electrical power outlet immediately in case of malfunction.
CLEANING THE UNIT
To prevent fire or shock hazard, disconnect your unit from the AC power source when
cleaning.
The finish on the unit may be cleaned with a dust cloth and cared for as other furniture, Use
caution when cleaning and wiping the plastic parts.
If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish
sprays on the cabinet.
If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a soft
cloth slightly dampened with a mild soap and water solution. Never use abrasive cloths or
polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while cleaning.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
AC Adaptor is not plugged
into a wall outlet or the
connector is not plugged
into the power supply jack
on the back of the unit.
Plug the AC adaptor into a wall outlet and plug
the connector into the supply jack on the unit.
The unit does not
respond (no power).
Wall
functioning.
outlet
is
not Plug another device into the same outlet to
confirm the outlet is working.
Remove your iPad/iPod/iPhone from the dock
iPad/iPod/iPhone is not and check for obstruction on the connectors in
installed properly.
the dock and on your iPad/iPod/iPhone. Then
reseat it on the dock.
iPad/iPod/iPhone
does not respond to
the speaker system.
Please make sure that your iPad/iPod/iPhone
is working properly before docking into the
unit. Please refer to your iPad/iPod/iPhone
Your iPad/iPod/iPhone is
locked up.
manual
for
info
on
resetting
the
iPad/iPod/iPhone.
Unit not in
iPad/iPod/iPhone mode
Make sure the function is set to
iPad/iPod/iPhone mode.
Remove your iPad/iPod/iPhone from the dock
iPad/iPod/iPhone is not and check for obstruction on the connectors in
installed properly.
the dock and on your iPad/iPod/iPhone. Then
reseat it in the dock.
iPad/iPod/iPhone
does not charge.
iPad/iPod/iPhone is locked Please make sure your iPad/iPod/iPhone is
up/ frozen.
iPad/iPod/iPhone battery
has problem.
working properly before docking into the unit.
Please refer to your iPad/iPod/iPhone manual
for details on resetting.
Remote control
- Insert new batteries.
No functions or short Battery exhausted
range.
- Aim remote directly towards the remote
sensor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Decrease the volume.
Volume level is set too
high.
If the iPad/iPod/iPhone original sound source
is of poor quality, distortion and noise are
easily noticed with high-power speakers. Try a
different audio source such as a music CD.
If you are using an external sound source like
older generation of iPod, try reducing the
output volume on the device itself. Also try
turning bass boost OFF or change the EQ
setting.
Sound is distorted.
Sound source is distorted.
Unit gets warm after
extended play at high This is normal.
volume.
Turn the unit off for a period of time or lower
volume.
SPECIFICATIONS
Power Requirement
Main Unit
AC-DC Adaptor: Input: AC 120V, 60Hz
Output: DC 10V, 3400 mA
Remote Control
1 X 3V CR2025
Lithium Battery
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessorywith iPod, iPhone, or iPad may affect wireless performance.
iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
At Spectra, environmental and social responsibility is a core
value of our business. We are dedicated to continuous
implementation of responsible initiatives with an aim to
conserve and maintain the environment through responsible
recycling.
Please visit us at http://www.spectraintl.com/green.htm for more information on Spectra’s green initiatives or to
find a recycler in your area.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
90 DAY LIMITED WARRANTY AND SERVICE
VALID IN THE U.S.A ONLY
SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective
materials or factory workmanship for a period of 90 days from the date of original customer purchase and
provided the product is utilized within the U.S.A. This warranty is not assignable or transferable. Our
obligation under this warranty is the repair or replacement of the defective unit or any part thereof, except
batteries, when it is returned to the SPECTRA Service Department, accompanied by proof of the date of
original consumer purchase, such as a duplicate copy of a sales receipt.
You must pay all shipping charges required to ship the product to SPECTRA for warranty service. If the
product is repaired or replaced under warranty, the return charges will be at SPECTRA’s expense. There
are no other express warranties other than those stated herein.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the SPECTRA product only while:
a. It remains in the possession of the original purchaser and proof of purchase is demonstrated.
b. It has not been subjected to accident, misuse, abuse, improper service, usage outside the
descriptions and warnings covered within the user manual or non-SPECTRA approved
modifications.
c. Claims are made within the warranty period.
2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance
with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and
necessary maintenance as outlined in the user manual.
3. Warranty of all SPECTRA products applies to residential use only and is void when products are used in
a nonresidential environment or installed outside the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. TO OBTAIN SERVICE please remove all batteries (if any) and pack the unit carefully and send it
freight prepaid to SPECTRA at the address shown below. IF THE UNIT IS RETURNED WITHIN THE
WARRANTY PERIOD shown above, please include a proof of purchase (dated cash register receipt) so
that we may establish your eligibility for warranty service and repair of the unit without cost. Also include a
note with a description explaining how the unit is defective. A customer service representative may need to
contact you regarding the status of your repair, so please include your name, address, phone number and
email address to expedite the process.
IF THE UNIT IS OUTSIDE THE WARRANTY PERIOD, please include a check for $50.00 to cover the cost
of repair, handling and return postage. All out of warranty returns must be sent prepaid.
It is recommended that you contact SPECTRA first at 1-800-777-5331 or by email at
you have may be discontinued, and SPECTRA reserves the right to offer alternative options for repair or
replacement.
SPECTRA MERCHANDISING INTERNATIONAL, INC.
4230 North Normandy Avenue,
Chicago, IL60634, USA.
1-800-777-5331
To register your product, visit the link on the website below to enter your information.
Printed in China
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|